Issuu on Google+

LED B Y D E S I G N

MODUX SERIES Contemporary modular light fixtures powered by the LuxR™ light engine


INTELLIGENT LED FOR SMARTER LIVING Contemporary living demands ever increasing efficiency in lighting yet many low-energy options fail to meet expectations of light output and quality. LuxR LED has been specifically developed to meet the challenge of delivering high quality practical lighting, with maximum energy efficiency, and long maintenance-free life. At LuxR, we believe in the importance of understanding the fundamental purpose of lighting and we use our industry knowledge to guide the design of all our light fittings, ensuring that the right level of light can be delivered where you want it, in a way that optimises the natural ambiance of your home or work environment. LuxR light fittings are ingeniously crafted to harness the power of LED technology, incorporating a host of smart innovations to minimise energy use, reduce maintenance requirements and simplify installation.

MODUX SERIES •

Advanced lighting, designed by experienced lighting specialists

Ultra efficient LED light engine with industry leading Cree LEDs

Dimmable

Plug-in LED board for simple upgrade or replacement

Available in a range of durable contemporary finishes

Modular construction for easy maintenance

Designed and manufactured in New Zealand

LEDShield series wiring electronic protection Integral driver option for Modux 2 & Modux 4 to compliment 12 volt AC/DC transformer systems

Confidence body warranty up to ten years

Confidence electronics warranty of five years

IP68 fully waterproof to 1 bar (9m) rating on all products


CoolTouch Safe operating temperature

Interchangable optics

LEDShield Series failure protection Interchangeable LED module Removable integral driver module

MODULAR We believe premium lighting products should offer advantages in efficiency and maintenance otherwise not found in the market. The modular design of our Modux 1,2 & 4 watt products makes it a simple task to repair or upgrade any component of our luminaires at any time or place. CoolTouch low heat design poses no danger of burning LEDShield protect series-wired LED strings from going down if any component should malfunction.

Modux 4 stainless steel shown


Contemporary modular light fixtures powered by the LuxR™ light engine

10yr BODY WARRANTY

5yr ELECTRONICS WARRANTY

ECO

REPLACEABLE LED

MODULAR DESIGN

MODUX ONE The Modux One is a range of very compact, contemporary LED luminaires powered by a 1 watt LuxR™ light engine. The modular design was developed to meet the challenge of delivering high quality practical accent lighting with maximum energy efficiency and a long, maintenance-free life.

Specifications Power: Input Current: Forward Voltage: CRI: Efficacy: Luminaire Options: Standards: Light Engine: Driver:

1 Watt 350mA ≈ 3V Ra 85 65 Lm/W Round Recessed, Square Recessed, Pond, Spot, Spike IP68, LM79, CE Plug-in LED board equipped with the Cree® XT-E series LED External constant current driver required

LED Colours

Lens

EASY INSTALL

LOW MAINTENANCE

NZ MADE

Warm White

Neutral White

Cool White

3000ºK

4000ºK

5000ºK

Red

Finishes

316 Black Gunmetal Natural Copper Stainless Anodised Bronze Steel Aluminium

Green

Blue

Amber

Clear

Frosted

20°

30°

Beam

15°


MODUX ONE

38.5

3.5

ROUND+SQUARE RECESSED

43

38.5

3.5

31

31

42

The Modux One recessed luminaires are

Accessories:

designed to be mounted either in the

PVC Mounting Canister

ground or floor as low profile uplighters,

350mA Constant Current Remote

or in walls or steps to illuminate paths and stairways. They can be installed either outdoors or indoors and offer the option of either a round or square flange.

Driver

PART L

III

Ø 34.5mm


3.5

MODUX ONE

31

42

175

42

42

42

77

3.5 38.5

77

3.5

45

38.5

42

77

38.5

POND+SPOT+SPIKE

31 45

45

42

42

The Modux One Pond, Spot and Spike

any hard surface and the Spike is designed

luminaires are miniature spotlights with a

to be inserted in the ground.

PART L

swivel bracket that provides 45° elevation adjustment. The Pondlight has a weighted

Accessories:

base and is designed to be installed

175

Driver

175

underwater. The Spot can be mounted to

350mA Constant Current Remote

III

Ø 34.5mm


Contemporary modular light fixtures powered by the LuxR™ light engine

MODUX TWO

10yr BODY WARRANTY

Modux Two is a range of mid-size, contemporary LED luminaires powered by a 2 watt LuxR™ light engine that offers a wide choice of LED colours. The modular design was developed to meet the challenge of delivering high quality practical accent lighting with maximum energy

ELECTRONICS WARRANTY

efficiency and a long, maintenance-free life.

Specifications: Power: Input Current: Forward Voltage: CRI: Efficacy: Luminaire Options: Standards: Light Engine: Driver:

5yr

2 Watt 700mA ≈ 3V Ra 85 60 Lm/W Round Recessed, Square Recessed, Louvre Recessed, Path Recessed, Step Recessed, Pond, Spot, Spike IP68, LM79 Plug-In LED board equipped with the Cree® XT-E series LED Optional Integral Plug-In 12 Volt Driver or External Remote Driver

ECO

REPLACEABLE LED

MODULAR DESIGN

Lens

LED Colours

Warm White

Neutral White

Cool White

3000ºK

4000ºK

5000ºK

Red

Finishes

316 Black Gunmetal Natural Copper Stainless Anodised Bronze Steel Aluminium

Green

Blue

Amber

Clear

Frosted

Hexcell

Beam

26°

EASY INSTALL

LOW MAINTENANCE

36°

74° NZ MADE


Contemporary modular light fixtures powered by the LuxR™ light engine

10yr BODY WARRANTY

5yr ELECTRONICS WARRANTY

ECO

REPLACEABLE LED

MODULAR DESIGN

MODUX FOUR

Modux Four is a range of mid-size, contemporary LED luminaires powered by a 4 watt

LuxR™ light engine that offers white colours only. The modular design was developed to meet the challenge of delivering high quality practical accent lighting with maximum energy efficiency and a long, maintenance-free life.

Specifications: Power: Input Current: Forward Voltage: CRI: Efficacy: Luminaire Options: Standards: Light Engine: Driver:

4 Watt 700mA ≈ 6V Ra 85 60 Lm/W Round Recessed, Square Recessed, Louvre Recessed, Path Recessed, Step Recessed, Pond, Spot, Spike IP68, LM79 Plug-In LED board equipped with the Cree® MT-G series LED Optional integral 12 Volt driver module or external remote driver

LED Colours

EASY INSTALL

Lens

Warm White

Neutral White

Cool White

3000ºK

4000ºK

5000ºK

Finishes LOW MAINTENANCE

NZ MADE

316 Black Gunmetal Natural Copper Stainless Anodised Bronze Steel Aluminium

Clear

Frosted

Hexcell

36°

74°

Beam

26°


MODUX TWO & FOUR

41

53

41

3.3

58

38.5

67.7

67.9

3.5

3.5

67.7

3.5

ROUND+SQUARE+RECESSED

58

41

43 Accessories:

are designed to be mounted either in the

PVC Mounting Canister

ground or floor as low profile uplighters,

700mA Constant Current Remote

or in walls or steps to illuminate paths and

3.5

The Modux Two & Four recessed luminaires

Driver •

Plug-In 12 Volt AC/DC Integral Driver

outdoors or indoors and offer the option of

Hexcell Louvre

38.5

stairways. They can be installed either either a round or square flange.

43

31

31 PART L

III

Ø 43.5mm


LOUVRE+PATH+RECESSED

Modux

Two

&

Four

41

53

recessed

3.5

These

Accessories:

luminaires are designed to be mounted

PVC Mounting Canister

either in the ground or in walls or steps.

700mA

The Louvre model directs the light at a 45° angle to eliminate glare for step or wall

38.5

lighting. The Path model provides a linear light spread for illuminating pathways and walkways.

43

31

63.9 58

41

53

41

3.3

3.3

Constant

Current

PART L

Remote

Driver •

70.8

41

41

67.9

58

53

3.5

41

67.7

53

70.8

67.9

14

3.3

3.3

MODUX TWO & FOUR

Plug-In 12 Volt AC/DC Integral Driver

III

Ø 43.5mm


MODUX TWO & FOUR

53

41

67.2

63.9

70.8

14

14.2

3.3

STEP+RECESSED

41

58

The Modux Two & Four recessed Steplight

Accessories:

is designed to be mounted in walls or

PVC Mounting Canister

steps. The eyelid helps to reduce glare

700mA Constant Current Remote Driver

when looking directly at the luminaire. •

Plug-In 12 Volt AC/DC Integral Driver

58

41

PART L

III

Ø 43.5mm


MODUX TWO & FOUR

POND+SPOT+SPIKE 16

90 Deg

58

41

90

90

102

63.9

67.2

14

14.2

90 Deg

90 Deg

41

16

90 Deg

90 Deg

58

90

102

90

90

67.2

102

90 Deg

41

Modux Two & Four Pond, Spot and Spike

Accessories:

luminaires are mid-size spotlights with a

700mA Constant Current Remote Driver

swivel bracket that provides 90’ elevation

Plug-In 12 Volt AC/DC Integral Driver

adjustment. The Pondlight has a weighted

Hexcell Louvre

PART L

III

Ø 43.5mm

underwater. The Spot can be mounted to any hard surface and the Spike is designed to be inserted in the ground.

175

base and is designed to be installed

175

63.9

175

14

14.2

90 Deg


Contemporary modular light fixtures powered by the LuxR™ light engine

ACCESSORIES

canisters

integral driver

REMOTE DRIVER

MODUX 1 : Ø 40mm x 200mm MODUX 2 : Ø 50mm x 200mm MODUX 4 : Ø 50mm x 200mm

MODUX 2 & 4 INTEGRAL DRIVER: Input Power: 12 V AC/DC Output Current: 700 mA Output Power: 4 W

MODUX 1 DRIVER: Input Power: 240 VAC Output Current: 350 mA Output Power: 1-9 W

MODUX 2 & 4 DRIVER: Input Power: 240 VAC Output Current: 700 mA Output Power: 6-12 W

RECESSED MOUNTING CANISTERS: LuxR uPVC mounting canisters simplify the installation of Modux recessed luminaires. Designed to be mounted in the wall or floor during initial construction. The luminaire is easily pushed inside the canister and is held in place with its rubber gasket.

50

200

50

200

INTEGRAL DRIVER: LuxR offers an integral 700 mA 12 V dimmable driver for the Modux 2 & Modux 4 models, enabling the luminaire to be easily connected to an approved 12 volt AC remote transformer. REMOTE DRIVERS: LuxR offers a range of external, remote drivers perfectly suited for all your Modux power

40

200

supply requirements. Remote drivers can allow several luminaires to be connected to a

40

200

procedures please be sure to check with your distributor or a qualified LED installer.

single driver and require SERIES WIRING. If you are not completely familiar with series wiring


Contemporary modular light fixtures powered by the LuxR™ light engine

WARRANTY

The LuxR CONFIDENCE Warranty overview: LuxR products are manufactured from the highest quality materials and are designed to provide many years of reliable service when correctly installed. Our modular construction ensures that all components, including the LED Board and Internal Driver, can be easily disassembled for maintenance. Our confidence in the quality of our products is demonstrated by the comprehensive warranty that comes with all LuxR luminaires: CONFIDENCE Body Warranty Copper, bronze, and stainless steel body and flanges on all LuxR Modux luminaires have a 10 year warranty against defective workmanship and deterioration while the aluminium body and flanges have a 5 year warranty. Both warranties are subject to standard conditions listed below: CONFIDENCE Electronics Warranty The electronic components in all LuxR Modux luminaires have a 5 year warranty against defective workmanship and failure, subject to standard conditions listed below:

Standard Conditions: •

The environment in which the fixture is to be installed must be considered carefully when selecting the finish. Solid copper and stainless steel fixtures are recommended for corrosive environments such as near salt water. Aluminium fixtures may not be covered by the full warranty in these situations.

Stainless Steel requires regular cleaning in salt air environments.

Warranty excludes impact damage (except for lenses), incorrect installation and incorrect re-assembly. Fixtures must be kept properly maintained, including replacement of gaskets whenever they are serviced.

LuxR reserves the right to replace components or provide remedial repair service in certain situations where appropriate. These situations may include the following: - Minor problems, directly attributable to manufacturing defects, which are easily fixed in-field. - Installations where removal of the fixtures is not practically feasible.

LuxR Limited reserves the right to limit liability on non-standard fixtures or delivery arrangements.


Contemporary modular light fixtures powered by the LuxR™ light engine

ENVIRONMENT LuxR is committed to creating premium-quality, contemporary LED luminaires that will endure the test of changing tastes and trends, while keeping pace with constant advances in lighting technology. We believe that the building industry must play an important role in reducing the negative impact of construction activity and, at the same time, assist people to realise their desires for increasingly improved living and work environments. LuxR delivers on that belief by designing lighting solutions that are contempoary, effective and long lasting, and that help our customers to minimise the waste of resources. •

LuxR products are easily disassembled and all parts are recyclable

We minimise the number of different types of material used in each product for easier recycling

We do not use environmentally harmful coatings, such as chromium plating.

Our stainless steel is fully recyclable

Our durable aluminium coating is an expression of the parent material itself, and is not a harmful process.

Our brass and bronze products have a natural “living” finish, developing a patina that evolves over time. We can offer an accelerated patina aged-finish on request

Our aim is to source as many materials and processors as possible from within a 20 kilometre radius of our manufacturing plant in Auckland, New Zealand.

Our packaging is made primarily of paper derived materials, including as much post-consumer recycled content as commercially possible

LuxR will continue to explore options for further reducing the environmental impact of our manufacturing processes.


Contemporary modular light fixtures powered by the LuxR™ light engine

INSTALLATION To preserve the validity of your warranty and ensure the long term

In Order to remove the residual voltage, short circuit the contacts on

performance of your LuxR products, it is critical to follow the correct installation procedures

the secondary output with the driver turned off. •

An LED can be damaged in an instant and this may not be immediately

Your distributor will be happy to provide you with advice and any additional

obvious, therefore it is important to plan and check your install before

information you may need.

you start.

Please note these important tips: •

Remote drivers most commonly use SERIES WIRING, in which the

When the device has been switched off, there is some tempoary

LED luminaires are connected in a chain. If you are not completely

voltage remaining on the secondary output, which decomposes within

familiar with series wiring procedures please be sure to check with

about 10 minutes. At this stage, no LEDs may be connected.

your distributor or a qualified LED installer.

CARE+REFINISHING LuxR recommends the following cleaning methods only:

LIVING FINISHES:

If you’re unsure of what finish you have for any reason, please get in touch

Natural copper and bronze body components, including accelerated

and supply some images.

patina finishes

Do not use oven cleaner under any circumstances

It is not essential that these finishes are cleaned as they will continue to patina over time

BLACK FINISHES:

Wipe over with a damp soft cloth or chamois with detergent and water.

Black anodising, black 316 stainless steel fasteners

When dry, a liquid furniture creme polish such as Neopol3 or Pledge

Wipe over gently with a damp soft cloth or chamois and window cleaner. 1,

Do not use metal polishing compounds like Brasso

Autosol2

etc

Shine-Up4 can be applied, and the excess wiped off, which will even out and darken the natural patina slightly. Do not use metal polishing compounds like Brasso, Autosol etc

STAINLESS STEEL FINISH: 316 marine grade stainless steel bodies and silver coloured fasteners

REFINISHING:

Scrub with a nylon brush, detergent and water.

Refinishing is a straightforward process for all, except black anodised

Specialist stainless steel brightening gels are available but are highly

aluminium.

corrosive to other surfaces

Contact LuxR to discuss in detail.

1 Brasso is a trademark of Reckitt Benckiser Plc (UK) 2 Autosol is a trademark of Autosol LLC (USA)

3 Neopol is a trademark of Bushland Products Pty Ltd (AUS) 4 Pledge Shine-Up is a trademarks of S. C. Johnson & Son (USA) It is also known as Pronto, Pliz and Blem


Proudly made in New Zealand

www.luxrled.com LuxR Limited Head Office 7/24 Bishop Dunn Place Botany South 2013, Auckland New Zealand phone +64 9 272 0374 email sales@luxrled.com

Distributor:


LuxR Brochure