Page 1

General Catalogue 2011


2

QUALITY

ISO QUALITY STANDARD UNE-EN ISO 9001 Quality management systems. Requirements.

13

Medical devices - Quality management systems Requirements for regulatory purposes.

IS O

UNE-EN ISO 13485

48

5


QUALITY

CE MARK IN Medical Devices (MDD) AND Medical Devices for in Vitro Diagnostics (IVD) The CE Mark concerns those products that, affecting human beings, may involve a risk to their health. For that reason they must comply with the following requirements: s$ONOTCOMPROMISEHEALTHORCLINICALSTATUS s $ONOTCOMPROMISEUSERSHEALTHORSAFETY s$ONOTCOMPROMISETHEHEALTHORSAFETYOFTHIRDPERSONS s-INIMIZETHERISKOFERRORSOFUSETHANKSTOITSERGONOMICFEATURESANDTHEENVIRONMENTINWHICHITISINTENDEDTOBEUSED s)TTAKESINTOACCOUNTTHETECHNICALKNOWLEDGE EXPERTISE EXPERIENCE TRAINING ANDMEDICALANDPHYSICALCONDITIONSOFTHE intended users. The CE Mark implies installations, and work organisation, and systems are submitted to rigorous both internal and external quality controls. It guarantees the highest level of safety when using those products intended for the sample collection and handling of human samples, both for the patient and for the user. CE Mark guarantees that those products will be freely commercialised within the European Union. Since December the 7th 2003, the only sanitary products (MDD and IVD) that can be commercialised are those ones with CE Mark.

MEDICAL DEVICES CLASIFICATION 1. MEDICAL DEVICES (MDD)

2. MEDICAL DEVICES FOR IN VITRO DIAGNOSTIC (IVD)

According to Directive 93/42/EEC (modiďŹ ed by Directive 2007/47/EC), a MDD Medical Device is “any instrument, device, equipment, material or any other article, including software, developed to be used with human beings, alone or in association with others, with the aim of: diagnosis, prevention, tracing, treatment or relief of a disease; diagnosis, tracing, treatment, relief or compensation in case of an injury or disability; investigation, substitution or modiďŹ cation of anatomy or physiological processes; fertility control; and not designed to perform the main action expected to be obtained by immunizing, pharmaceutical or metabolical means inside or over the human bodyâ€?.

According to Directive 98/79/EC, a medical device for in vitro diagnostic is “any medical device consisting on a reagent, reactive product, calibrator, monitoring equipment, instrumentation and equipment cases, sample containers, instrument, apparatus or system designed by the manufacturer to be used in vitro to examine human samples, including blood and tissues donations; with the aim of collecting information: about a physiologic or pathologic status, or a congenital anomaly; or to determine the security and compatibility with potential receptors; or in order to supervise therapeutical measures�.

This Directive establishes 4 categories of medical devices; DELTALAB manufactures and markets temporary use product, so: Class I (sterile and non sterile) and Class IIa: s Class I (Non sterile): Low risk, invasive medical devices It includes: non sterile tongue depressors, speculums... Inspection gloves are considered both as MDD Class I and PPE (Personal Protective Equipment). All of them are self certiďŹ cation products. s Class I (sterile): Low risk, sterile, invasive medical devices Among others: sterile tongue depressors, sterile Ayre spatulas, sterile cytology brushes... They are certiďŹ ed by a NotiďŹ ed Body. s Class IIa (sterile): Moderated risk medical devices Swabs with and without medium are included in this Class. They are certiďŹ ed by a NotiďŹ ed Body. CE Mark allows swabs to be used in surgical operations as an invasive product.

They are considered low risk devices as they are not in touch with human beings and are self certiďŹ cation products. As an example, sample containers, collection tubes, capillary tubes, etc. are included.

PPE PRODUCTS (Personal Protective Equipment) According to Directive 89/686/EEC, a PPE product is “any device or system a human being is wearing or using, which protects him from one or various risks that may endanger his health and/or security�. Security glasses and protection gloves are included. Inspection gloves are considered both as MDD and PPE as they protect the user while being a low risk, invasive medical device.

3


4

SALES CONDITIONS

Sales conditions s 'OODS ARE SHIPPED AT THE PURCHASERS RISK AND ON THE PURCHASERS account. s 'OODS ARE CONSIDERED DELIVERED AND AT THE RESPONSIBILITY OF THE purchaser, from their shipment from our warehouses. Any problem of transport or other is therefore the entire responsibility of the purchaser from that moment. s MINIMUM ORDERING QUANTITY (per total order) according to our price list. s MINIMUM ORDER QUANTITY (per product): In those products indicated, it is possible to acquire minor quantities from the standard selling unit. In those cases, a surcharge is applied in order to cover the manipulation costs. Please see speciďŹ c conditions in the Sales Conditions attached to the Price List or contact our Sales Department. Orders over the standard selling unit must be multiple of this standard selling unit. s /RDERSMUSTBEINCOMPLETECASEQUANTITIESUNLESSINDICATEDOTHERWISE s 'OODSDELIVEREDARETHEPROPERTYOF$ELTALAB 3,5UNTILPAIDINFULL s ORDERS should be conďŹ rmed in writing, stating our code number, description, total quantity and referring to any quotation number that may apply. In case of doubt the code number will have preference over its description. s &OR ANY CLAIM please quote our delivery note reference, batch number, product code, total quantity and any other relevant information. Any claim should be made within 60 days of receipt of goods. s RETURN OF GOODS: We only accept the return of goods due to a problem caused by DELTALAB, S.L.U. A prior authorisation must be obtained from our commercial department, in which we will indicate which freight forwarder should be used. s 7EIGHTSANDMEASURESINTHISCATALOGUEAREIN+GSANDCUBICMETERS For reasons which are beyond our control we reserve the right to modify the product speciďŹ cations. s 0LEASE CONTACT US FOR ANY SPECIAL PRODUCT. In addition to the products listed we can offer a wide range of colour caps, different concentrations of anticoagulants, different conďŹ gurations of our stainless steel racks and private labelled products.

DELTALAB, S.L.U.

All rights reserved. No part of this catalogue may be reproduced without the prior permission in writing of DELTALAB, S.L.U.


NOMENCLATOR

Stackable

Graduated

Alphanumerical Identification

Floats

DNAse and RNAse free

Autoclavable (see more information about autoclaving in page 11)

Suitable for PCR

Suitable for QPCR (Real Time PCR)

NEW

c (IVD)

New

Directive 98/79/EC (in Vitro Diagnostic medical device)

c (MDD)

Directive 93/42/EEC (low and moderate risk medical device)

c class IIa

Directive 93/42/EEC (Moderate risk, sterile medical device)

c (EPI)

Directive 89/686/EEC (Personal protective equipment)

The technical data (dimensions, capacities and resistances) specified in this catalogue are approximated. The resistances (to chemical products, temperature, centrifugation…) may suffer variations depending on external conditions. We recommend to test the product under the forecasted conditions of use. Please do not hesitate to ask for samples if necessary.

5


6

SUMMARY

SUMMARY


SUMMARY

0

Technical information

8

1

Microbiology

14

2

Molecular Biology

46

3

Haematology and Biochemistry

64

4

Histology

84

5

Microscopy and Staining

96

6

Sampling and Transport

110

7

Tubes and Microtubes

122

8

Sample Containers

150

9

Liquid Handling

170

10

Sample Storage and Cryogenics

200

11

Safety

240

12

General Labware

258

13

Laboratory and Industrial Packaging

284

14

Index

309

7


8

CHEMICAL RESISTANCES PELD ºC

PEHD

PP

PS

TPX

ABS

20

50

20

50

20

50

20

50

20

50

1.4 - dioxane

Acetaldehyde

Acetic acid

Acetone

Acrylonitrile

20

50

PMMA

PC

PVC

PTFE

20

50

20

50

20

50

20

50 ●

Adipic acid

Aluminium chloride

Aluminium hydroxide

Allyl alcohol

Amino acids

Ammoniac

Ammonic hydroxide (30 %)

Ammonium chloride

Amyl acetate

Amyl alcohol

Amyl chloride

Aniline

Aqua regia

Benzaldehyde

Benzene

Benzine

Benzoid acid

Boric acid (10 %)

Bromine

Bromoform

Butyl acetate

Butyl alcohol

Calcium chloride

Calcium hydroxide

Calcium hypoclorit

Carbon sulphate

Carbon tetrachloride

Citric acid

Cupric sulphate

Chlorine (10 %)

Chlorine water

Chloroform

Chlorydic acid (35 %)

Chromic acid (10 %)

Chromic acid (50 %)

Chromic sulphate blend

Decahydronaphtalene

Dichlorobenzene

Diethylene glycol

Dimethyl formamide

Dimethyl sulphoxide

Ether

Ethyl acetate

Ethyl alcohol (100%)

Ethylene chloride

Ethylene oxide

Fluorine

Formaldehyde (40 %)

Formic acid (98-100 %)

Fuel oil

Glacial acetic acid

Glycerine

Glycol


CHEMICAL RESISTANCES ºC

PELD 20 50

PEHD 20 50

PP 20

PS 50

20

50

TPX 20 50

ABS 20 50

PMMA 20 50

Hexane

Hydrofluoric acid (40 %)

Hydrofluoric acid (70 %)

Hydrogen peroxide (35%)

PC 20

50

PVC 20 50

PTFE 20 50

Iodine

Isobutyl alcohol

Isopropyl alcohol

Isopropyl benzene

Lactic acid

Mercurous chloride

Mercury

Methyl acetate

Methyl alcohol

✖ ✖

Methyl propyl ketone

Methylene chloride

Mineral oil

Monochloroacetic acid

Nitric acid (10 %)

Nitric acid (50 %)

Nitric acid (70 %)

Nitrobenxene

Oxalic acid

Ozone

Perchloric acid

Perchloroethylene

Phenol (100 %)

Phosphoric acid (85 %)

Phtalat dibutylic

Potassium chloride

Potassium hydroxide

Potassium permanganate

Propylene glycol

Propylene oxide

Pyridine

Salicylic acid

Salicylic aldehyde

Silver acetate

Silver nitrate

Sodium acetate

Sodium dichromate

Sodium hydroxide

● ✖

Sulfuric acid (60 %)

Sulfuric acid (98 %)

Tartaric acid

Tetrahydrofuran

Toluene

Trichloroethane

Trichloroethylene

Triethylene glycol

Tripropylene glycol

Turpentine

Urea

Vinylidene chloride

Xylol

Zinc chloride (10 %)

Zinc sulphate (10 %)

● = Excellent / very good chemical resistance ■ = Good / limited chemical resistance ✖ = Poor chemical resistance

9


10

CHEMICAL RESISTANCES POLYSTYRENE

HIGH DENSITY POLYETHYLENE

LOW DENSITY POLYETHYLENE

POLYPROPYLENE

PS

PEHD

LDPE

PP STANDAR

The catalytic controlled polymerisation of ethylene minimises the production of compact, lateral structures resulting in a pliable but rigid material.

Ethylene is polymerised under super pressure, which produces a higher number of less compact lateral structures resulting in a material which is more flexible than HDPE.

Polypropylene properties are similar to polyethylene. A methyl group is bonded to each carbon pair, which greatly improves the thermal resistance. Polyethylene becomes brittle when in contact with oxidants for long periods of time.

[– CH – CH –] n

[– CH – CH –] n

[- CH(CH3) – CH2 -]

GENERAL PROPERTIES

Amorphous structure with stable dimensions

[– (CH –CH ) – CH –CH –] m 2

Structure

n

2

[– CH – CH – (CH – CH ) –] m 2

2

2

2

2

2

Transparency

Optically clear

Opaque

Opaque

Translucent

Mechanical resistance

Rigid / Brittle

Rigid

Flexible

Resists Deformation

Density

1,05 gr/cm2

0,955 gr/cm2

0,924 gr/cm2

0,91 gr/cm2

Max. temperature

70º C

80º C

75º C

121º C

Min. temperature

-10º C

-50º C

-50º C

0º C*

Autoclavable

NO

NO

NO

YES

Gas sterilization

DOSES LIMITED

YES

YES

YES

Gamma irradiation Sterilization

YES

YES

YES

DOSES LIMITED

Beta irradiation Sterilization

YES

YES

YES

YES

Water absorption

< 0,05 %

< 0,01 %

< 0,01 %

< 0,02 %

Properties

-Bright finish -Clear

- Light. - Slight electrostatic Charge

- Light weighted. - Slight electrostatic change - Impact resistant

-Virtually inert

*There are special blends of PP like those from our cryovials, which are able to withstand up to -196ºC.

T in See PE

99

page 2

POLYSTYRENE

HIGH DENSITY POLYETHYLENE

LOW DENSITY POLYETHYLENE

POLYPROPYLENE

GENERAL CHEMICAL RESISTANCE

PS

HDPE

LDPE

PP STANDARD

Oils

GOOD

GOOD

GOOD

GOOD

Acids

LIMITED*

GOOD*

GOOD*

GOOD*

Alcohol

GOOD

GOOD

GOOD

GOOD

Bases

GOOD

GOOD

GOOD

GOOD

Ketones

POOR

LIMITED

LIMITED

LIMITED

Esters

POOR

LIMITED

LIMITED

LIMITED

Fats

GOOD

GOOD

GOOD

GOOD

Hydrocarbons -aromatics

POOR

GOOD

LIMITED

GOOD

Hydrocarbons Chloride Hydrocarbons Halogenated Metals (Cu, Mn, Co) Oxidants

See chemical resistance table**

LIMITED

LIMITED

See chemical resistant table**

POOR

LIMITED

LIMITED

LIMITED

See chemical resistance table**

See chemical resistant table**

See chemical resistant table**

LIMITED

See chemical resistance table**

LIMITED/POOR

LIMITED/POOR

LIMITED/POOR

* Poor resistance to strong oxidant acids ** Chemical resistances of plastics are detailed in a specific table


STERILISATION METHODS METHOD

PROCEDURE

Dry heat

Direct action of dry heat Â&#x17D;#FORORÂ&#x17D;#  

Autoclave,Super Heated Steam under pressure

Ethylene Oxide (â&#x20AC;&#x153;EO Gasâ&#x20AC;?)

PRECAUTIONS

LIMITATIONS

Glassware, metals and liquids.

High temperatures may damage fragile metals.

4HEOWNMATERIALS limitations. High heat soaking may unacceptabbly affect material properties.

Action of 3 elements: temperature, water steam ANDPRESSUREÂ&#x17D;# Â&#x17D;#

Glassware, fabrics, liquids etcâ&#x20AC;ŚAll materials resistant to heat above 121ÂşC and moisture.

Not recommended for most ordinary plastics. When autoclaving capped containers, total closure shall be avoided

Generally used for the sterilisation of small articles.

Used alone, associated with freon or carbon dioxyde. 55 to 60ÂşC (2-3h), 27 to 33ÂşC (5h30)

Generally all materials, some exceptions.

Requires a subsequent ventilation to ensure sterilised products are free of residual gases that may be toxic.

Ethylene oxide is toxic and explosive.

By radiations emitted by a radioactive source

Widely used in industries to sterilise single use material. Sterilisation doses are calculated from bioburden counts.

Limitations in some applications, as some material properties may be unacceptably altered by this method.

Effects on material are cumulative, therefore gamma sterilised products are not resterilisable, by most conventional methods, after ďŹ rst use.

Beta irradiation (non radioactive particle accelerator)

High energy electron beam

Widely used in industries to sterilise single use material. Sterilisation doses are calculated from bioburden counts.

Limitation in some applications, as some material properties may be unacceptably altered by this method.

Affects on material are cumulative, therefore beta sterilised products are not resterilisable, by most conventional methods, after ďŹ rst use.

Chemical (FormolAldehydes)

Chemical products are steam and heat

Special applications, minimal industrial use.

Toxic

Requires specialised sterilisation equipment and procedures.

Gamma irradiation (Radioactive cobalt source)

RECOMMENDED FOR

In an ASEPTIC PRODUCTION, manufacturing processes, packaging methods and environment are designed to prevent bacterial contamination (bioburden). Our EUROTUBOÂŽ containers are injected at a temperature of 250 ÂşC and are automatically connected to the assembling and packaging processes, without manual intervention, so as to guarantee an aseptic production.

11


12

TECHNICAL INFORMATION Glove properties chart LATEX NITRILE VINYL Mechanical resistance - Perforation - Tearing Adequate for foodstuff handling Comfort

Glove chemical resistance chart Diluted mineral acids Hydrochloric acid ✖

Chromic acid Nitric acid Perchloric acid Phosphoric acid and Sulphuric acid Concentrated acids Chlorhidric acid

Chromic acid Nitric acid

Sulphuric acid Maximum resistance of nitrile gloves 125ºC. : Excelent; : Good; : Limited; ✖ : Not recommended These indications are solely for information. It is strongly recommended that the user carries out preliminary testings.

Hydrocarbon and oil by products ✖

Aniline White spirit

Styrene

'ASOLINE (EXANE 0ARAFlNE +EROSENE

CENTRIFUGATION: Conversion G - R.P.M. The relative centrifugal force (RCF) can be determined using the formula: FCR= 1,118 x 10-6 x r x n² r= radius of the rotor (mm); distance between the axis of the rotor and the farest wall of the tube. n= rotating speed (revolutions per minute). The result is expressed in terms of acceleration (g); 1 g is equal to 9,807 m/s².

Conversion chart G - R.P.M. G

1.000 G

1.500 G

2.000 G

2.500 G

3.000 G

3.500 G

4.000 G

4.500 G

5.000 G

50 mm

rpm 4.227

5.177

5.978

6.683

7.321

7.908

8.454

8.967

9.452

75 mm

3.451

rpm 4.227

4.881

5.457

5.978

6.457

6.903

7.321

7.717

100 mm

2.989

3.661

rpm 4.227

4.726

5.177

5.592

5.978

6.340

6.683

125 mm

2.673

3.274

3.781

rpm 4.227

4.630

5.001

5.347

5.671

5.978

150 mm

2.440

2.989

3.451

3.859

rpm 4.227

4.566

4.881

5.177

5.457

175 mm

2.259

2.767

3.195

3.572

3.913

rpm 4.227

4.519

4.793

5.052

200 mm

2.113

2.588

2.989

3.342

3.661

3.954

rpm 4.227

4.483

4.725

225 mm

1.993

2.440

2.818

3.151

3.451

3.728

3.985

rpm 4.227

4.456

250 mm

1.890

2.315

2.673

2.989

3.274

3.537

3.781

4.010

rpm 4.227

r


TECHNICAL INFORMATION METRIC EQUIVALENCES ANGLO-SAXON MEASURES

METRIC SYSTEM

Length: 1 inch (in) = 2.54 cm 12 in = 1 foot (ft) = 30.48 cm 3 ft = 1 yard (yd) = 91.44 m 1,760 yd = 1 mile = 5,280 ft = ±1.6093 km

1 centimeter (cm) = 0.01 metro (m) 1 millimeter (mm) = 0.1 cm 1 micron (μm) = 0.001 mm 1 nanometer (nm) = 0.001 μm

Volume: 1 cubic inch (in³) = 16.387 cm³ 1,728 in³ = 1 cubic foot (ft³) = 0.0283 m³ 27 ft³ = 1 cubic yard (yd³) = 0.7646 m³

1,000 mm³ = 1 cubic centimeter (cm³) 1,000 cm³ = 1 cubic decimeter (dm³) 1,000 dm³ = 1 cubic meter (m³)

Capacity: 1 ounce EUA (fl.oz) = 29.57 ml 1 gallon EUA = 3.7854 l 1 gill = 0.142 l 4 gills = 1 pint = 0.5683 l 2 pints (pt) = 1 cuarto (qt) = 1.1365 l 4 qt = 1 brit gallon = 4.5461 l

1 microliter (μl)= 0.001 ml 1 milliliter (ml) = 0.001 l 1 centiliter (cl) = 0.01 l 1 deciliter (dl) = 0.1 l 1 cubic decimeter (dm³) = 1 l 1 hectoliter (hl) = 100 l

Weight : 1 ounce (oz) = 28,349 g (1 g = 0.035 oz) 16 oz = 1 pound (lb) = 0.4536 kg 112 lb = 1 hundredweight (cwt) = 50.80 kg

1 kilogramme (kg) = 1,000 g 1 milligramme(mg) = 0.001 g 1 microgramme (μg) = 0.001 mg

PRESSURE: CONVERSION IS EQUAL TO: 1 at (technical atmosphere) 1 Atm (physical atmosphere) 1 Atm 1 bar 1 Torr

0,980665 bar 1,01325 bar 1,033 at 105 Pa (Pascal) 1,3332 mbar (milibar)

HOW TO FIGURE OUT VOLUMES CUBE

RECTANGULAR PRISM

CYLINDER

CONE

V = C3

V = (L x h) x l

S = 2Rh (lateral volume) V = Bh =  R2h

V = Bh = R h 3 3 2

CONVERSION (ºF - ºC - ºK) ºF (Farenheit) = (ºC x 1,8) + 32

ºC (Celsius) = (ºF – 32) x 0,556

ºK (Kelvin) = ºC + 273,15

USEFUL INFORMATION: TRANSPORT Containers: capacity:

Pallets:

20 feet: 28 m3 maximum 40 feet: 58 m3 maximum 40 HC feet: 68 m3 maximum maximum height land transport: 2.40 m maximum height sea transport: 2.10 m width x depth european pallet: 80 x 120 cm width x depth american pallet: 100 x 120 cm

13


14

1. MICROBIOLOGY


1. MICROBIOLOGY

15


16

1. MICROBIOLOGY Swabs for microbiological sampling Swabs are used for biological sampling. Specially used for processing samples which, after being coloured, will be analysed by microscopy. Also suitable for isolations in culture medium. Another important use is its capacity to spread dishes by dissemination techniques (for example for susceptibility testing by Kirby-Bauer or by E-test).

Swabs class IIa The swabs for microbiological sample collection in open wounds, as being a surgical invasive product with a temporary use, are manufactured in compliance with Guideline 93/42/CEE (Directive of Sanitary Products), amended by Directive 2007/47/EC, according to which is classified as class IIa. General Management of Pharmacy and Sanitary Products works as the Official Control Organism with the number 0318.

Quality standards 1. UNE-EN ISO 556-1 Sanitary products sterilisation. Requirements to be designated as “STERILE” Part 1: Sterilised sanitary products requirements, 2. UNE-EN ISO 1174-1 Sterilisation of sanitary Microorganisms number estimate in a product.

products.

3. UNE-EN 980 Graphic symbols used in the sanitary products labelling. 4. UNE-EN ISO 14971 Medical devices. Application of risk management to medical devices. 5. UNE-EN ISO 13485 Medical devices. Quality management systems. Requirements for regulatory purposes.

1

2

3

4

Presentations 1. In Bulk - the non-sterile swabs presented in bags of 100 units 2. Peel-pack package – single bag. Paper (fiber free) which can be peeled. It consists in one side of medical paper and another side of polyethylene. 3. Flow-pack package – single bag. Polypropylene bioriented bag. 4. Package in polypropylene tube – The product is identified on the label. All sort of package have the following parameters printed on: product code, product description, lot number, expiry date, CE mark, manufacturer name and address, sterilisation method and single use mark


1. MICROBIOLOGY c (MDD)

Non sterile swabs

Model 300232 is longer than the traditional swabs and is designed for those hard to reach places. For use in gynaecology when taking endocervical cells while using the speculum.

Wood

Polystyrene

Wood

Dimensions: 300232 shaft 200 x 2,5 mm. Tip 5 mm Ø. Other models dimensions: Wood and plastic: 150 x 2.5 mm (tip Ø ± 5 mm). Aluminium: 150 x 0.9 mm (tip Ø ± 1.5 mm). They are supplied in bags of 100 units, excepting code 300205, supplied bulk.

code

description

case quantity

case weight

case volume

300232

wood + cotton

80 x 100

5.00

0.030

300230

wood + cotton

100 x 100

7.80

0.032

300260

polypropylene + cotton

40 x 100

2.50

0.016

300270

snappable polystyrene + cotton

40 x 100

2.50

0.016 NEW

300268

snappable polystyrene + dacron

40 x 100

2.50

0.016

300243

aluminium + cotton

10 x 100

2.40

0.006

300244

aluminium + viscose

10 x 100

2.40

0.006 NEW

300205*

wooden shaft only

1 x 1,000

0.41

0.001

* Non c product.

All swabs have a round, compact and shred resistant head for a proper sampling avoiding fiber loose.

Wood

Crack!

Aluminium

Crack!

See other swabs in Chapter 11. Safety

Wood

Snappable polystyrene

Aluminium

17


18

1. MICROBIOLOGY c class IIa (MDD)

Sterile swabs

Sterile swabs Individually wrapped in peel-pack (sterilized by ethylene oxide) or flow pack (sterilized by radiation), depending on the model. For use when samples do not need to be transported. We recommend our transport swabs in tubes when sample transport is required (see next page). package

case quantity

case weight

case volume

wood + cotton

peel-pack

2 x 1,000

2.6

0.029

310200

wood + cotton

flow-pack

2 x 1,000

2.6

0.029

300201

snappable PS + cotton

peel-pack

2 x 1,000

3.5

0.029

300202

snappable PS + viscose

peel-pack

2 x 1,000

3.5

0.029

310202

snappable PS + viscose

flow-pack

2 x 1,000

3.5

0.029

code

description

300200

300203

aluminium + cotton

peel-pack

2 x 1,000

2.4

0.029

310253.1

aluminium + viscose

flow-pack

2 x 1,000

2.3

0.029

Cases per pallet: 54. 1. Flow pack 2. Peel pack

A

1

B

A: Wood B: Snappable Polystyrene C: Aluminium

C

2

Sterile swabs (2 units)

c class IIa (MDD)

Two Sterile swabs wrapped in peel-pack (sterilized by ethylene oxide) or flow pack (sterilized by radiation), depending on the model. One swab is designed for cleaning the sampling area. The other swab is designed for sample collection. For use when samples do not need to be transported. We recommend our transport swabs in tubes when sample transport is required 1,000 peel-packs/flow-packs with 2 units each one per case. code

description

package

case quantity

case weight

case volume

300210

wood + cotton

peel-pack

1,000

2.54

0.025

300211.1

snappable PS + cotton

peel-pack

1,000

2.72

0.025

310211.1

snappable PS + cotton

flow-pack

1,000

2.72

0.025

Cases per pallet: 54.


1. MICROBIOLOGY

c class IIa (MDD)

Sterile swab in round tube

Sterile dry swabs supplied in shockproof round polypropylene tube, with a label sealing the cap. Dimensions of tube: Ă&#x2DC; 13 x 165 mm. Sterilised by ethylene oxide.

bottom

code

description

case quantity

case weight

case volume

300250

wood + cotton

4 x 500

14.00

0.066

300259

wood + viscose

4 x 500

14.00

0.066

300261

snappable polystyrene + cotton

4 x 500

14.20

0.066

300252

snappable polystyrene + viscose

4 x 500

14.20

0.066

300251

aluminium + cotton

4 x 500

14.00

0.066

300253

aluminium + viscose

4 x 500

14.00

0.066

300263

snappable polystyrene + dacron

4 x 500

14.20

0.066

300250.1

wood + pure cotton

4 x 500

14.00

0.066

Cases per pallet: 27.

See Chapter 6. Sampling and Transport.

19


20

1. MICROBIOLOGY Transport swabs with media

A

New packaging: New Plastic Peel Pack New Packaging Case (100 pcs) New External Box (6 x 100 pcs) New Tube Label

A

E

Manufactured in Clean Room + Sterilised by Radiation Safety s 0APER LESS PLASTIC 0EEL 0ACK IS AN extraordinary safe system to maintain pack integrity and sterility Comfort s 3PACESAVING s #OLLAPSIBLEINTERNALCASE s %ASYWHAREHOUSEIDENTIlCATION s 3ELLINGUNITEASYTOCOMMERCIALIZE s .EWSTANDARDISEDPACKQUANTITYFORALL our swabs

C D B Information Traceability s &ULL RANGE OF TRANSPORT MEDIAS LISTED ON THE s %ACH SINGLE 0EEL 0ACK IS PRINTED WITH THE Package Catalogue number, Bar Code, Lot Number, s #LEAR DUAL #% -ARKING )6$ -$$ PRINTED IN Expiry Date and Product Description both, Peel Pack and Case s "OTH %XTERNAL AND )NTERNAL #ASES ARE ALSO s 5SERS GUIDE PROVIDED IN BOTH 0EEL 0ACK AND identified with Catalogue number, Bar Case Code, Lot Number, Expiry Date and Product Description. Design Environmentally friendly s !TTRACTIVE0EEL0ACKANDFRIENDLY5SERS'UIDE s %YE CATCHING#ASEDESIGNEDEXCLUSIVELYFORSWABS s 0EEL 0ACK MADE OF ONE MATERIAL ONLY EASY recycling! s $RAWINGSOFASWABANDATUBEONBOTHTHE0EEL Pack and the Case for first sight identificacion

c Swabs As the two main components of a transport swab have different purposes and different ways of interaction with the patient, both have different CE treatment: 1. Swab: for microbiological sample collection. As a surgical invasive product of temporary use, is classified as CLASS IIa product in compliance with Guideline 93/42/EEC (Directive of Sanitary Products) amended by Directive 2007/47/EC. 2. Tube with transport media: container facilitator of survival and transport of biological samples prior to analysis. Classified as in vitro diagnostic IVD (according to Directive 98/79/EC).

Transport media The media used to transport the sample, has the appropriate chemical composition that maintains the bioburden levels with the minimum physiological activity, achieving thus the minimal quantitative and qualitative variation of the sample from the collection to its analysis.

Components: Each set consists in a tube and a swab, packed in a peel-pack bag (A) and sterilised by radiation. (B) Tube with transport media: Made of rigid polypropylene, suitable for food testing. (C) Polyethylene cap specially designed to close hermetically; non slippery surface when using gloves. (D) Coloured label in each tube with the following parameters printed: transport media type, sterilisation method, manufacturer name, CE mark, “single use” and “see the instructions” marks, lot number and expiry date, as well as spaces to write patient name, date, time, medical report number, source and kind of sample. The label seals the cap and the tube. (E) Swab fitted in a second cap with a shaft which ends in a tip of synthetic or organic material hardly adhered to the shaft. The cap provides a leakproof seal after sample collection.

Both the peel-pack package and the label of the tube are printed with the following information: transport media type, sterilization method, manufacturer name, CE mark, “single use” and “see the instructions” marks, lot number, and expiry date. Peel pack also includes bar code.


1. MICROBIOLOGY Swab: c class IIa (MDD) Tube with media: c (IVD)

Amies. Sterile

AMIES media is a modification of Cary Blair media, which is at the same time a modification of Stuart media. Basically the glycerophosphate is replaced by an inorganic phosphate, and the methylene blue by pharmacological charcoal. Calcium and magnesium are also added, thus maintaining the permeability of the bacterial cell. This media assures the viability of organisms such as: Neisseria sp. Haemophilus sp. Corynebacterium sp. The presence of charcoal on the Trichomonas vaginalis media neutralises inhibitors and bacterial toxins, and improves Streptococcus pyogenes the recovery ratio of Neisseria Streptococcus pneumoniae gonorrhoeae and Vibrio cholerae Shigella flexneri Salmonella typhi Brucella abortus Enterobacterias, etc. Some microorganisms can resist on the media for up to 3 days, although the recovery of microorganisms is better if cultured in the first 24 hours. Amies transport swabs are available with or without charcoal. Swabs are sterilised by radiation. Peel-pack dimensions: 38 x 210 mm. Expiry date: 30 months after sterilisation date. case case weight quantity

case volume

code

description

300287

snappable polystyrene + viscose

6 x 100

8.5

0.052

300285

snappable polystyrene + viscose (with charcoal)

6 x 100

8.5

0.052

300281

aluminum + viscose

6 x 100

8.5

0.052 NEW

300281/1

aluminum + viscose (with charcoal)

6 x 100

8.5

0.052 NEW

Cases per pallet: 32.

Liquid Amies. Sterile

Swab: c class IIa (MDD) Tube with media: c (IVD)

This is a variation of the traditional Amies media swab where the media is presented on liquid form without agar. Suitable for conservation of pathogens such as: Haemophilus sp. Corynebacterium sp. Trichomonas vaginalis Streptococcus pyogenes Streptococcus pneumoniae Shigella flexneri Salmonella typhi Brucella abortus etc. Media is supplied in its liquid form, in a sponge, suitable for direct extensions on slides. Swabs are sterilised by radiation. Peel-pack dimensions: 38 x 210 mm. Expiry date: 30 months after sterilisation date. code

description

300284

snappable polystyrene + viscose

Cases per pallet: 32.

case case weight quantity

6 x 100

7.5

case volume

0.052

21


22

1. MICROBIOLOGY Stuart swabs. Sterile

Swab: c class IIa (MDD) Tube with media: c (IVD)

The modified Stuart media allows the conservation and transportation of a large number of pathological microorganisms, such as: Neisseria gonorrhoeae Heamophilus influenzae Neisseria meningiditis Bordetella pertusis Corynebacterium diphteriae Trichomonas vaginalis Streptococcus sp. Salmonella sp. Shigellas sp. etc. The most unstable organisms will remain viable for up to 24 hours and other for several days. The media is reduced due to the presence of thioglycolate, which difficults the enzymatic reactions of the bacteria. The multiplication of the bacteria is prevented due to the lack of nitrogen in the media. Swabs are sterilised by radiation. Dimensions of the peel-pack: 38 x 210 mm. Expiry date: 30 months from sterilisation date. code

description

case quantity

case weight

case volume

300290

wood + cotton

6 x 100

8,5

0.052

300291

aluminium + cotton

6 x 100

8,5

0.052

300295

snappable polystyrene + viscose

6 x 100

8,5

0.052

Cases per pallet: 32.

Swab: c class IIa (MDD) Tube with media: c (IVD)

Cary Blair. Sterile

Cary Blair is another modification of Stuart media. The glycerophosphate has been substituted by inorganic phosphate since glycerophosphate is a metabolite for some bacteria, so they could grow and disgrise the pathogens amount. The methylene blue has also been removed and the pH increased to 8.4. This is a media originally developed for faecal samples but is also used successfully for anaerobic transport, such as: Neisseria gonorrhoeae Vibrio cholerae Heamophilus influenzae Neisseria meningiditis Bordetella pertusis Streptococcus pneumoniae Shigella flexneri Swabs are sterilised by radiation. Dimensions of the peel-pack: 38 x 210 mm. Expiry date: 30 months from sterilisation date. description

case quantity

case weight

case volume

300280

wood + cotton

6 x 100

8.5

0.052

300280.2

snappable polystyrene + viscose

6 x 100

8.5

0.052

code

Cases per pallet: 32.


1. MICROBIOLOGY Media for virus. Sterile

Swab: c class IIa (MDD) Tube with media: c (IVD)

This viral transport media preserves the specimen during transportation to the laboratory. Suitable, among many others: Papiloma Pseudorrabia Influenza aviar (H7N1) Influenza A (H1N1) o H1N1/09 pandemic. The media maintains the sample viable for up to 72 hours and in some cases for longer time The addition of antimicrobial substances inhibit the growth of bacteria and fungi. Ideal for nasal, pharyngeal, ocular, skin and mucus samples. Media is supplied in its liquid form, in a sponge, suitable for direct extensions on slides. Swabs are sterilized by radiaton. Expiry date: 18 months from sterilisation date

code

description

case quantity

case weight

case volume

300297

snappable polystyrene + dacron

6 x 100

7.8

0.052

300294

aluminium + dacron

6 x 100

9.4

0.052 NEW

Minimum order quantity: 100 units. Cases per pallet: 32.

Media for Chlamydia. Sterile

Swab: c class IIa (MDD) Tube with media: c (IVD)

Liquid media, suitable for Chlamydia. For cervical samples it is recommended to firstly use a dry swab to clear the cervical channel. Media is supplied in its liquid form, in a sponge, suitable for direct extensions on slides. Sterilised by radiaton. Expiry date: 12 months from sterilisation.. code

description

case quantity

case weight

case volume

300299

snappable polystyrene + dacron

6 x 100

7.8

0.052

Minimum order quantity: 100 units. Cases per pallet: 32.

23


24

1. MICROBIOLOGY 90 x 14 mm Petri Dish Made in polystyrene. Supplied in groups of 20 units, packaged in heat sealed bags. Code 200200 is aseptic. Code 200209 is sterile by radiation. Suitable for automatic filling machines. code

sterile

case quantity

case weight

case volume

pallet quantity

no

25 x 20

7.92

0.071

14,000

RADIATION 25 x 20

7.92

0.071

14,000

0.071

14,000

description

With three vents 200200

Ø 90 x 14 mm

200209

Ø 90 x 14 mm

Not vented dishes, for the cultivation of anaerobic

NEW200200.4

Ø 90 x 14 mm

no

25 x 20

7.92

90 x 14 mm Petri Dish, two compartments Made in polystyrene. Aseptic. With three vents. Supplied in groups of 20 units, packaged in heat sealed bags. Suitable for automatic filling machines. They can be sterilised by radiation upon request. code

description

case quantity

case weight

case volume

pallet quantity

200202

Ø 90 x 14 mm 2 compartments

25 x 20

8.04

0.071

14,000

90 x 14 mm Petri Dish, three compartments Made in polystyrene. Aseptic. With three vents. Supplied in groups of 20 units, packaged in heat sealed bags. Suitable for automatic filling machines. It can be sterilised by radiation upon request. code

description

case quantity

case weight

case volume

pallet quantity

200203

Ø 90 x 14 mm 3 compartments

25 x 20

8.15

0.071

14,000

90 x 15 mm Petri Dish, four compartments

NEW

Made in polystyrene. Aseptic. Vented. Supplied in groups of 25 units, packaged in heat sealed bags. Suitable for automatic filling machines. It can be sterilised by radiation upon request. code

description

case quantity

case weight

case volume

pallet quantity

200210

Ø 90 x 15 mm 4 compartments

24 x 25

9.20

0.077

14,400


1. MICROBIOLOGY Petri Dish 90 x 15 mm with internal cross Made in polystyrene. Aseptic. With four vents. Stackable. With a mark on a side that helps orientation and a writing area on the bottom. Supplied in groups of 25 units, packaged in heat sealed bags. Suitable for automatic filling machines. It can be sterilised by radiation upon request. code

description

case quantity

case weight

case volume

pallet quantity

200200.5

Ø 90 x 15 mm internal cross

24 x 25

7.50

0.077

14,400

140 x 20 mm Petri Dish Made in polystyrene. With three vents. Supplied in groups of 10 units, packaged in heat sealed bags. Suitable for automatic filling machines. Code 200214 is aseptic. Code 200219 is sterile by radiation. description

sterile

case quantity

case weight

case volume

pallet quantity

200214

Ø 140 x 20 mm

no

12 x 10

6.16

0.065

3,600

200219

Ø 140 x 20 mm RADIATION 12 x 10

6.16

0.065

3,600

code

120 x 120 mm squared Petri Dish Made in polystyrene. Aseptic. With four vents. Supplied in groups of 10 units, packaged in heat sealed bags. Suitable for automatic filling machines. It can be sterilised by radiation upon request. code

description

case quantity

case weight

case volume

pallet quantity

200204

120 x 120 mm

24 x 10

16.65

0.071

6,720

55 x 14 mm Petri Dish Made in polystyrene. With four vents. Supplied in groups of 15 units, packaged in heat sealed bags. Suitable for automatic filling machines. Code 200201 is aseptic. Code 200201.B is sterile by radiation. code

description

sterile

case quantity

case weight

case volume

pallet quantity

200201

Ø 55 x 14 mm

no

80 x 15

8.50

0.065

36,000

RADIATION

80 x 15

8.50

0.065

36,000

200201.B Ø 55 x 14 mm

NEW

25


26

1. MICROBIOLOGY

Anaerobiosis jar Easy and practical system designed to incubate Petri dishes in anaerobiosis. 2,5 l capacity, made of transparent polycarbonate (find more about in page 270); it embodies an hermetical lid with a silicone joint, and a stainless steel rack. Compatible with the more usual reagents in microbiology. Capacity: 12 standard dishes (Ø 90 mm). code

Ø (with closure) x height mm

case quantity

case weight

case volume

H-616

165 x 230

1

0.72

0.007

Ø 100 mm Petri dish baskets These stainless steel baskets are suitable for dishes of diameter up to 10 cm. Two models available to hold 10 or 20 Petri dishes

code

description

dimensions mm handle case case mm (height without quantity weight height handle)

case volume

1 section,

110x105x250

105

1

0.10

0.003

2 sections,

215x105x250

100

1

0.20

0.006

H-600 holds up to 10 dishes H-601 holds up to 20 dishes

We can supply customer-designed models.

Moulded 90 or 100 mm Petri dish rack Useful for safe transport and incubation 90 or 100 mm Petri dishes and helpful to streamline bench top sample processing. Each rack holds up to forty-two Petri dishes with lids, configured in six columns of seven plates. Up to 4 racks can be stacked together, and all interlock to prevent accidental knock over. Access slots under the bottom Petri dishes allows a stack of dishes to be safely removed from the rack using a secure ring that places a finger under the bottom dish and thumb on top of the lid if the top dish. A large centre divider provides space for labelling and incorporates a handle. All parts are moulded with white polypropylene and are steam autoclavable at 121 ºC. Racks are supplied individually bagged, flat, and can be easily assembled (instructions included). code

dimensions mm

case quantity

case weight

case volume

H-611

330 x 210 x 178

1

0.935

0.003


1. MICROBIOLOGY

Contact plates ASEPTIC production. Used in the pharmaceutical or food-processing industry, hospital environments for determining bacterial contamination of surfaces such as the skin, operating tables, refrigerated gondolas, and work surfaces. They are manufactured in transparent polystyrene. The moulded grid at the bottom makes it possible to identify the detected contamination per cm2 and it facilitates the counting of colonies. Stable stacking: The shape of the lid makes stacking perfectly stable during transport and incubation, and saves space on work surfaces. Dimensions of the dish: 65,7 mm x 14,7 mm height. sterile

case quantity

case weight

case volume

cases per pallet

Rodac contact plate

no

25 x 20

5.00

0.034

70

Rodac contact plate

RADIATION

25 x 20

5.00

0.034

70

code

description

200208 200218

See chapter 6. Sampling and transport

See chapter 5. Microscopy and staining

Moulded contact plate rack Useful for safe transport and incubation of Rodac contact plates and helpful to streamline bench top sample processing. Each rack holds up to 60 contact plates with lids (minimum diameter: 65 mm, maximum diameter: 72 mm) configured in six columns of ten plates. Up to 4 racks can be stacked together, and all interlock to prevent accidental knock over. Access slots under each stack of contact plates allows a stack of plates to be safely removed from the rack using a secure ring that places a finger under the bottom plate and thumb on top of the lid if the top plate. A large centre divider provides space for labelling and incorporates a handle. All parts are moulded with white polypropylene and are steam autoclavable at 121 ºC. Racks are supplied individually bagged, flat, and can be easily assembled (instructions included). code

dimensions mm

case quantity

case weight

case volume

H-610

266 x 165 x 178

1

0.35

0.002

27


28

1. MICROBIOLOGY

Stackable Petri dish incubation tray This polypropylene tray increases overall capacity of incubator. Designed to hold five 100 mm diameter or fifteen 60 mm diameter 0ETRI DISHES ITS PROVIDED WITH TWO LARGE LABEL AREAS FOR CRITICAL sample identification by marker or label. With 16 vents. Not autoclavable. code

dimensions mm

bag quantity

bag weight

bag volume

H-615

251 x 237 x 35

3

0.97

0.0082

Microtitre plates, sterile Standard 96 well-plate made of crystal-clear polystyrene. Three models with different well shapes are available. In general terms, flat bottom plates are used when optical reading is required (for example, using a spectrophotometer); rounded and conical bottom plates are very useful when total recovery of the sample is required; they also offer better performance than flat bottom plates for sample separation through centrifugation. Some applications: - Diluting NEW - Serial sample preparation TERILE - Protein precipitation NON S - Hemagglutination - Conical bottom plates may be used for complement fixation - Flat bottom plates are also suitable for cell growth in suspension, and for ELISA applications, when there is no need of a pretreated plate (which enhances the antigen-antibody adhesion to the surface of the plate) Polystyrene lids are supplied separately, see code 900015. Those plates can also be covered using the sealing mat or the adhesive sealing film presented on page 60. Available in two versions: non sterile in bags of ten units, or sterilized and individually wrapped. Plate dimensions: 127.7 x 85.8 mm. Well plate estimate volume: 900010: 0.281 ml. 900011: 0.404 ml. 900012: 0.219 ml.

code

description

sterile

case quantity

case weight

case volume

900010

microtitre plate “U” form

2.33

0.014

NEW 900010.1 900011

NEW 900011.1 900012

NEW 900012.1 900015

NEW 900015.1

RADIATION

50

microtitre plate “U” form

non

5 x 10

2.33

0.014

microtitre plate “ ” form

RADIATION

50

2.33

0.014

microtitre plate “ ” form

non

5 x 10

2.33

0.014

microtitre plate “V” form

RADIATION

50

2.33

0.014

microtitre plate “V” form

non

5 x 10

2.33

0.014

lid for microtitre plate

RADIATION

50

1.15

0.014

lid for microtitre plate

non

5 x 10

1.15

0.014


1. MICROBIOLOGY 1

2

CRYOINSTANT: Porous beads for microbiological culture preservation CryoInstant is an excellent preservation system for storing microbiological culture (for example fungus on sporulation phase), consisting on 2 ml cryovials containing 25 porous beads and cryopreservative-added broth. With these vials we can: - Get a perfect freezing storage system. - Obtain up to 25 replicates from the original microorganism, to use them during many years - Ease the recovery of the stored strain streaking an inoculated bead directly onto solid media - Prevent changes and repetitive thawing / freezing of the rest of beads - Avoid the growth of ice when recovering, - Improve recovery rates of frozen cultures by adding cryopreservative to broth - Minimise the risk of cross contamination, - Save space in the freezers when storing. The external thread cryovials are made of polypropilene. Their smooth inner surface prevents from contamination. Their caps embody a silicone washer to ensure a positive leakproof seal. Tubes and caps withstand up to -190ºC. In order to ease the classification of the samples, we offer the possibility to get cryovials with caps and beads in five different colours: every code displays caps and beads from a single and same colour (excepting code 409113/6, which is an assortment), allowing a fast and easy identification of the samples, and providing a system whereby users are able to code different bacterial species, different samples, different laboratories,… And even more: with colour coded inserts (described on page 202) a further classification can be made. Cryovials are presented in carton boxes (resistant to –100ºC; dimensions: 150x150x55 mm) with 100 units; boxes are furtherly described in page 212. Each box is supplied plasticwrapped and labelled with code reference, batch, expiration date and specifying the colour of the caps and beads. code

beads and cap colour

case quantity

case weight

case volume

409113/1

white

100

0.22

0.001

409113/2

blue

100

0.22

0.001

409113/3

yellow

100

0.22

0.001

409113/4

red

100

0.22

0.001

409113/5

green

100

0.22

0.001

409113/6

assorted: 5 colours x 20 cryovials

100

0.22

0.001

3

4

5

6

Way of use: Take the sample from the strain with a loop (please see our loops on page 31), Inoculate the cryovial by putting the loop in contact with the broth, Close the cryovial and shake it gently in order to permeate the strain into the beads, Extract the cryopreservative-added broth with a Pasteur pipette (see our plastic pipettes on pages 191-195), 5 Close the cryovial and take it to the freezer; 6 Every time we need to reproduce the strain, we will take a bead with a loop or a forceps. 7 We will put it down on a Petri dish with culture medium, attempting to put in contact all the surface of the bead with the medium. 1 2 3 4

7

29


30

1. MICROBIOLOGY Digralsky spreader. Sterile Designed for surface spreading. Made of white polystyrene. Radiation sterilized. Total length: 149 mm, base length: 40 mm. Base length allows spreading liquid samples over any type of Petri dish and avoids contact with the dish walls. The curved Spreader extremity and rounded corners avoid damaging media surface while spreading. The tip bent and rounded edges minimize the possibility of breakage of the solid medium during extension. Supplied individually wrapped or 5 unit bagged, to allow their use in places where sterilization before use is not possible (for instance when samples are collected far from the lab). Available in peel-pack containing 1 or 5 units, marked with code, expiry date and lot. code

presentation

case quantity

case weight

case volume

200500

5 units peel-pack

200 x 5

3.6

0.024

200510

1 unit peel-pack

500

3.1

0.020

Nichrome wire loops

B D

C

A

E G F

Nichrome wire loops for microbiology. Comparing them to the traditional loops made of platinum and rhodium, the nickel and chrome alloy results much more competitive in terms of durability and price. Moreover, it offers a totally smooth surface, and rapid cooling after heat sterilisation. Non-calibrated loops (mod. A and B): Non-calibrated nichrome loops, without holder, saving money and storage space. Supplied in groups of 25 units, in one tube, specifying code, description, and lot. Calibrated loops (mod. C and D): Calibrated nichrome loops. Supplied individually in a capped tube, labeled with the code, description and lot. Calibrated and non-calibrated loops are easily joinable to the PVC and aluminium holder (mod. E) with an easy and fast screw movement. Dimensions of the aluminium holder 150 mm. Non-calibrated loops with holder (mod. F and G): Non-calibrated loop made of nichrome alloy. Light aluminium holder (mod. G, golden colour, mod. F, green) partially protected by a transparent, insulating, non-skid plastic. Dimensions, 275 mm. mod.

code

description

quantity

A

302762

Non-calibrated loop 2 mm Ø

25

B

302764

Non-calibrated loop 4 mm Ø

25

C

302771

Calibrated loop 1 μl

1

D

302772

Calibrated loop 10 μl

1

E

302780

Loop holder, PVC and aluminium

1

F

302792

Non-calibrated loop (2 mm Ø) with holder

5

G

302794

Non-calibrated loop (4 mm Ø) with holder

5


1. MICROBIOLOGY Sterile calibrated loops. Ergonomical Flexible inoculating loops made of polystyrene. Sterilized by radiation. Ergonomic loops, providing: sALARGEHANDLE sALARGERSURFACEFORUSERSlNGERS sAVERYTHINTIPFORCOLONYCOUNTING 2 sizes: 1 Îźl (yellow) and 10 Îźl (blue). This is not a precision product.

code

Îźl

packaging

case quantity

case weight

case volume

302740

1

individual ďŹ&#x201A;ow-pack

2 x 600

3.60

0.029

302741

1

5 units / ďŹ&#x201A;ow-pack

2 x 1,000

5.00

0.029

302742

1

10 units / ďŹ&#x201A;ow- pack

2 x 1,500

6.60

0.029

302750

10

individual ďŹ&#x201A;ow-pack

2 x 600

3.60

0.029

302751

10

5 units / ďŹ&#x201A;ow-pack

2 x 1,000

5.00

0.029

302752

10

10 units / ďŹ&#x201A;ow-pack

2 x 1,250

5.70

0.029

Sterile calibrated loops Manufactured in ďŹ&#x201A;exible polystyrene. Sterilized by radiation. Two sizes available: 1 Îźl and 10 Îźl. Very ďŹ&#x201A;exible loop, with rounded tip. Not recommended for colony counting. For this purpose we recommend our loops code 302740 and following. Sterile inoculating loops. Batch and expiry date printed on the bag. case quantity

case weight

case volume

code

Îźl

packaging

colour

302703

1

10 ud./peel-pack

green

4 x 500

5.00

0.012

302723

1

20 ud./peel-pack

green

4 x 1,000

7.40

0.039

302704

10

10 ud./peel-pack

blue

4 x 500

5.00

0.037

302724

10

20 ud./peel-pack

blue

4 x 1,000

7.80

0.039

31


32

1. MICROBIOLOGY

Loose position for aerobic work

PosSealed position for anaerobic cultures

Sterile culture tubes in polystyrene Tubes supplied with either a two position ribbed polyethylene cap, which can be left loose for aerobic work or sealed for anaerobic cultures. They are biologically inert, exempt from mold release agents, and withstand up to 1,400 g and 70ºC. Packaged in self-standing resealable zip-lock bags of 125 units. code

dimensions mm

case quantity

case weight

case volume

300807

12 x 75

8 x 125

4.33

0.033

300808

17 x 100

8 x 125

7.14

0.060

See our glass tubes on chapter 7. Tubes and Microtubes

NEW

c (IVD)

15 ml conical tubes, sterile

Tubes made of transparent, copolymer polypropylene. Green caps made of polyethylene with an internal joint which ensures leakproofness. Tubes feature a solvent resistant white panel and black graduations for use both for clear or dark samples. DNAse, RNAse, endotoxins and metal free. They are sterile by radiation and withstand temperatures down to -90ºC. Resistance to centrifugation: 17,000 g. Autoclavable tube (the joint of the cap is not autoclavable) Two options available: - Supplied in bags of 50 units. Bags printed with instructions of use. - Supplied in fiber racks of 25 ml. Racks with holding grip, numbered grid and instructions printed on the base. Racks fold flat for storing (when empty) or recycling. Every case contains ten bags with two racks.

code

description

case quantity

case weight

case volume

409920

bag 50 units

10 x 50

4.12

0.032

rack 25 units

10 x (2 x 25)

4.12

0.032

NEW 409920R


1. MICROBIOLOGY

c (IVD)

EUROTUBO® 15 ml conical tubes

Tubes made of transparent polypropylene, conical bottom, suitable for centrifugation tests in immunology, microbiology, etc. Continuous thread, external moulded graduations in 0,5 ml increments. Frosted area (55 x 10 mm). Blue cap in polyethylene with hermetical closure thanks to its internal elastic obturation. Code 429910 is autoclavable (121ºC) with the cap not being closed, just placed on the thread. The codes 429920 and 429946 autoclave not recommended, as they have been sterilised by radiation. Code 429920 is supplied sterile in 25 microns polyethylene bags (100 units). The bag specifies IVD, lot number, expiration date,… Code 429946 is supplied sterile in individual bags. Resistance: 5,000 g. Length (with cap): 120 mm. External mouth diameter: 17 mm. External cap diameter: 20,9 mm. case quantity

case weight

case volume

cases per pallet

non sterile

500

3,8

0,029

60

429920

STERILE

5 x 100

3,9

0,029

60

429946

STERILE individually bagged

500

3,9

0,038

54

code

description

429910

Please find racks for these tubes in Chapter 10. Sample Storage and Cryogenics. POLYPROPYLENE RACKS: s7-016 s7  s

METAL RACKS: s!-202 s!  s!  s! 

33


1. MICROBIOLOGY

PP

34

mod. 3, 4

4

1 3 2

c (IVD)

EUROTUBO® 12 ml screw cap tubes, round bottom

Made of autoclavable (121ºC) transparent polypropylene or polystyrene. Green cap made of high density polyethylene. Dimensions: 15 x 102 mm. The external skirt allows the tubes to remain free-standing. Supplied screwed. Recommended volume: 12 ml. The sterile model (ethylene oxide) is supplied individually in flow-pack bag, with indication of batch, expiration date, etc... according to the guidelines for sterile products. Resistance to centrifugation: PS: 7,500 g. PP: 15,000 g. Attention: For autoclaving, the cap should be loose on the thread and not tightly fitted. mod.

description

code

1

301402

2

301403

3

401402

4

401403

STERILE

maximum volume ml

volume recom. ml

case quantity

case weight

case volume

cases pallet

14.4

12

6 x 250

13.00

0.096

20

14.4

12

6 x 250

12.00

0.082

24

14.2

12

6 x 250

11.80

0.096

20

121º C

14.2

12

6 x 250

11.00

0.082

24

121º C

polystyrene individually wrapped polystyrene

STERILE

polypropylene individually wrapped

high transparency polypropylene

Dimensions (±0,09): code

external cap Ø mm A

external tube Ø mm B

internal tube Ø mm C

length with cap mm D

length without cap mm E

301402, 301403

20.9

16.3

14.4

103.9

102.5

401402, 401403

20.9

16.2

14.3

102.9

101.5

NEW

D

E A

C B

50 ml conical high resistance tubes. Sterile

c (IVD)

In transparent polypropylene whit fitted green polyethylene screw cap, featuring an internal elastic obturator. DNAse, RNAse, endotoxins and metal free. Black graduations every 5 ml and moulded mark at 50 ml, with white labelling area. Available skirted (freestanding) and non skirted. Dimensions: 29.6 x 114.6 mm. Skirted tube can withstand centrifugation up to 10,000 g. Non skirted, up to 20,000 g. Sterile. In case autoclaving is necessary, cap should not be tightly screwed so air can pass through. Supplied capped in bags of 50 units. Bags are printed with instructions for use and feature a double closure: a first tamper evident seal that helps guaranteeing sterility, and a secondary zip-lock, resealable closure. code

description

409922

non skirted skirted

NEW 409923

case quantity

case weight

case volume

10 x 50

8.16

0.079

10 x 50

8.80

0.079


1. MICROBIOLOGY

c (IVD)

EUROTUBO® 50 ml conical tubes

Tubes made of transparent polypropylene, conical bottom, suitable for centrifugation tests in immunology, microbiology, etc. Perfect to analyse Koch bacillus. Continuous thread, external moulded graduations in 5 ml increments. Blue cap in high density polyethylene with hermetical closure thanks to its internal elastic obturation. Skirted and non skirted versions, sterilised by radiation and non sterilised versions. Sterile codes are either supplied in individual bags (codes 429926, 429927), in bags of 100 units (codes 429926.10, 429927.10), or in bags of 25 units (codes 429926.25, 429927.25) and resist up to 7,000 g. Autoclave not recommended as they have been ionised. Non sterile codes withstand up to 12,000 g and are autoclavable (121 ºC) with the cap loose on the thread and not tightly fitted. Every version is supplied capped, excepting code 429900SP, which is supplied uncapped, with the cap in a separated bag. description

external cap Ø mm

internal tube Ø mm

external tube Ø mm

length with cap mm

case quantity

case weight

case volume

cases per pallet

429900

non skirted

34.4

27.2

29.5

117.5

500

7.9

0.075

24

429900SP

non skirted, unscrewed cap

34.4

27.2

29.5

117.5

500

7.9

0.075

24 NEW

429901

skirted

34.4

27.2

29.5

117.5

500

8.5

0.082

24

code

429926

STERILE

non skirted, individually wrapped

34.4

27.2

29.5

117.5

500

8.2

0.082

24

429926.25

STERILE

non skirted, bag 25 units

34.4

27.2

29.5

117.5

20x25

8.2

0.082

24 NEW

429926.10

STERILE

non skirted, bag 100 units

34.4

27.2

29.5

117.5

5x100

7.9

0.082

24

429927

STERILE

skirted, individually wrapped

34.4

27.2

29.5

117.5

500

8.8

0.082

24

429927.25

STERILE

skirted, bag 25 units

34.4

27.2

29.5

117.5

20x25

8.8

0.082

24 NEW

429927.10

STERILE

skirted, bag 100 units

34.4

27.2

29.5

117.5

5x100

8.5

0.082

24

Please find racks for these tubes on Chapter 10. Sample Storage and Cryogenics. POLYPROPYLENE RACKS: s7  s s

METAL RACKS: s2 s2  s2 s2  s2 

35


36

1. MICROBIOLOGY

1. Evacuate the 2. Intake by air by pressing pressing on the bulb, as the point B drawing indicates.

3. Drain the liquid by pressing on point A

4. Blow out the pipette by pressing as the drawing indicates (point C).

EUROTUBO® Pipetting bulb B

C A

This one-handed design is the simplest safety pipette filler to use available. Manufactured in natural orange rubber. Approx. drawn capacity: 25 ml. Single hand use, only two operating points. Evacuate via the automatic valve. Standard model, accommodates all pipettes. Ability to clean inside of bulb by removing patented valve and rinsing out. code

description

bag quantity

bag weight

bag volume

19200

pippeting bulb

1

0.10

0.002

Pipetting bulb Made of rubber. Used to avoid mouth pipetting and contamination risk. Can be opened, cleaned and autoclaved. Ideal for Wintrobe and Westergren pipettes. code

description

bag quantity

bag weight

bag volume

19201

red pippeting bulb

1

0.10

0.001

Pipette pump support rack See Chapter 11. Safety.

Pipette pumps Several models for various pipette volumes. Designed for fast and efficient pipetting with simple, one handed operation. Pipettes fit smoothly into collar. Rotate the knurled thumb wheel on the side for precision filling or dispensing, and press the fast release lever for quick emptying. Easy to use and easily disassembled for cleaning. Sizes are colour coded. Pipette pumps resist acids and alkalies.

code

description

colour

bag quantity

bag weight

bag volume

W-100

up to 2 ml

blue

1

0.05

0.0001

W-110

up to 10 ml

green

1

0.05

0.0001

W-120

up to 25 ml

red

1

0.05

0.0001


1. MICROBIOLOGY

C

B

A

Three models of tips available: A = TAPE END, B = WIDE TIP, C = OPEN TIP (recommended for viscose samples).

Sterile serological pipettes Single use, made of crystal polystyrene. Accuracy > 98 %. Sterilised by radiation. Made in one piece for an optimum precision, except code 90043 (50 ml). No liquid retention: as tip is not sealed, liquid is not held at the joint. Total dispensing guaranteed. Non pyrogenic (ISO 10993-11), non cytotoxic (ISO 10993-5) and non haemolytic (ISO 10993-4). DNase and RNase free. Volumes range from 1 to 25 ml. Pipettes include a coloured cotton plug for better identification. The peel-pack have a fiber-free packaging including a strip for easy opening. Black graduations are bright, black and permanent. 5, 10 and 25 ml models have negative graduations for extra capacity, and a second reverse scale (ascending and descending). code

capacity ml

presentation

900030

1

1 peel pack

900031

1

bag of 25

900130

1

1 peel pack

900131

1

bag of 25

900032

2

1 peel pack

900033

2

bag of 25

900133

2

bag of 25

900034

5

1 peel pack

900038

5

bag of 25

900144

5

1 peel pack

900134

5

1 peel pack

900036

10

1 peel pack

900037

10

bag of 25

900146

10

1 peel pack

900147

10

bag of 25

900136

10

1 peel pack

900137

10

bag of 25

900041

25

1 peel pack

900042

25

bag of 10

900043

50

1 peel pack

See our plastic Pasteur pipettes in Chapter 9. Liquid Handling

cotton colour

s s s s s s s s s s s s s s s s s s s s

case quantity

tip

graduation negative total ml graduation ml capacity ml

case weight

case volume

4 x 500

A

0/0.9

until –0.3

1.3

10.10

0.072

4 x 1,000

A

0/0.9

until –0.3

1.3

14.00

0.072

4 x 500

C

0/0.9

until –0.3

1.3

10.10

0.072

4 x 1,000

C

0/0.9

until –0.3

1.3

14.00

0.072

4 x 500

A

0/1.8

until –0.4

2.4

11.30

0.072

4 x 1,000

A

0/1.8

until –0.4

2.4

17.20

0.072

4 x 1,000

C

0/1.8

until –0.4

2.4

17.20

0.072

4 x 250

A

0/4

until –3

8

12.20

0.072

4 x 375

A

0/4

until –3

8

15.10

0.072

4 x 250

B

0/4

until –3

8

12.20

0.072

4 x 250

C

0/4

until –3

8

12.20

0.072

4 x 200

A

0/9

until –3

13

11.20

0.072

4 x 250

A

0/9

until –3

13

12.80

0.072

4 x 200

B

0/9

until –3

13

11.20

0.072

4 x 250

B

0/9

until –3

13

12.80

0.072

4 x 250

C

0/9

until –3

13

11.20

0.072

4 x 250

C

0/9

until –3

13

12.80

0.072

4 x 100

A

0/23

until –10

35

11.20

0.072

4 x 100

A

1/5

until –2.6

27.6

11.20

0.072

200

A

1/2

until –5

55

6.70

0.072

See our Chapter 10. Sample storage and Cryogenics

37


38

1. MICROBIOLOGY

5

5

2 4

3

2

1

Sterile bags for STOMACHER® blenders Made of polyethylene. Thickness 7-8/100 mm. Ideal for mixing and blending bacterial samples or when collecting toxic substances from food, fabrics, etc… Irradiation sterilised. Supplied in bags of 25 units. Code 15006 is a stainless steel rack for 14 bags. Side handles incorporated. Code 15007 is a clip to adjust bags onto the rack. Also available non sterile versions. Please ask for the minimum order quantity and delivery time. Add an “S” at the end of the code. mod.

code

description

capacity mm

case quantity

case weight

case volume

1

15001

bag 100 x 155 mm

80

2,500

4.80

0.010

2

15003

bag 180 x 300 mm

400

500

3.78

0.010

3

15004

bag 380 x 580 mm

3,500

400

11.70

0.040

4

15006

rack 390 x 200 x 240 mm

-

1

1.10

0.140

15007

clips

-

10

0.20

0.001

5

Tissue grinders-homogenisers Borosilicate glass vessels and serrated plunger. Tips: head made of TEFLON, shaft made of stainless steel. Fully autoclavable. The distance between the glass and the plunger is ± 200 μm. Glass vessels: code

volume ml

body Ø mm

height mm

quantity

weight

volume

196102

2

8

120

1

0.01

0.001

196105

5

12

132

1

0.01

0.001

196110

10

16

150

1

0.02

0.001

196115

15

19

155

1

0.03

0.001

Plunger-serrated tips: code

for tube of mm

height mm

quantity

weight

volume

196302

2

230

1

0.06

0.001

196305

5

235

1

0.06

0.001

196310

10

270

1

0.06

0.001

196315

15

270

1

0.06

0.001


1. MICROBIOLOGY solid sample

filter

3 liquid sample

2 1

3

Sterile Whirl-Pak® blender bags with and without filter Bags made of a low density polyethylene blend, resulting in an extra-resistant and transparent bag. Leakproof closure with several metallic rounded sticks (see how to use it on figures on page 113). Codes 200373, 200374 and 200376 feature a filter layer of finely perforated polyethylene, to separate the liquid and solids. This allows the easy pipetting of the sample. There are 6.45 holes per cm2, each one measuring 330 microns diameter. Bags with a one-piece seam, avoiding the possible risks of the loss of the corners bags. They feature a write-on strip (excluding codes 200342 y 200343). Ethylene Oxyde sterilised. Suitable for alimentary use. mod.

code

description

capacity ml

dimensions cm

tickness microns

case quantity

case weight

case volume

1

200342

standard bag

390

13 x 19

76

500

2.50

0.0195

1

200343

standard bag

720

15 x 23

102

500

3.75

0.0195

2

200351

bag with write-on strip

1,650

19 x 30

102

500

6.13

0.0203

3

200373

bag with filter and write-on strip

720

15 x 23

102

250

3.50

0.0170

3

200376

bag with filter and write-on strip

1,650

19 x 30

102

250

4.10

0.0170

3

200374

bag with filter and write-on strip

2,041

19 x 38

102

250

4.90

0.0203

Sterile homogeniser full size filter bag Bags incorporate a full size filter dividing them into two identical pouches. Insert the sample in one compartment. After sample process, solid particles remain in their original compartment while liquid has filtered into the second compartment, thus allowing a convenient liquid pipetting. Bag capacity: 2,000 ml. Sterilised by irradiation. Graduated. code

packaging

case quantity

case weight

case volume

15005

195 x 300 mm in bags of 10 units

500

7.2

0.04

39


40

1. MICROBIOLOGY Surfaces sampling kits Designed according to the international standard ISO 18593, which is taken as a reference on European Directives and Rules about Microbiology of food and animal feeding stuffs - Horizontal methods for sampling techniques from surfaces (p.ex., Rule nr. 2073/2005, Directives 64/433/CEE, 71/118/CEE…). Adequate not only over surfaces but with instruments (quartering, cleaning...). Two options: with sponge (code 200396), or with swab (code 200397): Code 200396 includes: - A Whirl-Pak bag containing a sterile sampling sponge. - A disposable sterile template, supplied in a flow-pack bag. - A bottle containing 40 ml. sterile solution De-Neutralising. Way of use: - Put on a pair of sterile gloves (not included). - Open the bag containing the sponge. - Swab the carcass with the sponge through the template as described on the rule. - Return the sponge to the bag and add the De-Neutralisim solution. - Close the bag and sent it to a laboratory for testing (see how to use and close Whirl-Pak bags on page 113). Code 200397 includes: A sterile cotton swab (11 mm diameter head), with a wooden stick, individually packed in flow pack. - A disposable sterile template, supplied in flow-pack. - A bottle containing 40 ml sterile solution De-Neutralising. -

Way of use: - Put on a pair of sterile gloves (not included). - Place the template over the surface to sample. - Moisten the swab with the De-Neutralisim solution, and rub it up and down ten times over the area set by the template. - Put the swab into the bottle with the remaining solution and split it up, leaving the head inside the bottle. - Close the bottle and send it to the laboratory at 4ºC.

Please, ask for our technical data sheet

code

description

case quantity

case weight

case volume

200396

surface sampling kit with sponge

20

2.45

0.012

200397

surface sampling kit with swab

20

2.35

0.012

See Contact plates on page 27


1. MICROBIOLOGY Meat or turkey carcass sampling kit Designed according to the international standard ISO 17604, which is taken as a reference on European Directives and Rules about Microbiology of food and animal feeding stuffs Carcass sampling for microbiological analysis (p.ex., Rule nr. 2073/2005, nr. 1688/2005, Decision 2006/668/CE…). Two options: with sponge (200393), or with swabs (200394): Code 200393 includes: - A bottle containing 25 ml sterile buffered peptone water. - A Whirl-Pak bag containing a sterile sampling sponge. - A disposable sterile template (sampling area of 10 x 10 cm), supplied in a flow-pack bag. Way of use: - Put on a pair of sterile gloves (not included). - Open the bag containing the sponge and then pour half of the peptone water inside in order to moisten the sponge. - Swab the carcass with the sponge through the template in those places specified on the rule (usually four). - Return the sponge to the bag and add the balance of the peptone water. - Close the bag and sent it to a lab (see how to close Whirl-Pak bags on page 113). Code 200394 includes: - A sterile bottle containing 10 ml buffered peptone water. - Two sterile cotton swabs (11 mm diameter head), with a wooden stick, individually packed in flow pack. - A disposable sterile template, supplied in a flow-pack bag. Way of use: - Put on a pair of sterile gloves (not included). - Place the template over the area of the carcass to sample. - Moisten the swab with the peptone water, and rub it over the surface set by the template (100 cm2). - Put the swab into the bottle with the remaining peptone water and split the stick up, leaving the head inside the bottle. - Rub the dry swab over the same area, put it on the bottle with the first swab, and split the stick up, leaving the head inside the bottle. - Close the bottle and send it to a lab inside a secondary container (see page 118). The template is available separately (code 200393P). Please, ask for our technical data sheet

code

description

case quantity

case weight

case volume

200393

carcass sampling kit with sponge

20

2.25

0.012

200394

carcass sampling kit with swab

20

2.10

0.012

200393P

template

20

0.75

0.005

41


42

1. MICROBIOLOGY

Thiosulfate

4

1

5

3

2

Sterile jars for water sampling Transparent squared jars made of PET (see its properties in page 299). Wide mouth and grips at two sides, easing the sample collection. Tamper evident red cap made of polypropylene with internal joint made of polexan. Sterilised by radiation. Each bottle is labelled specifying description, code, lot, and expiry date. Internal mouth diameter mm: 55 Jar weight (gr): 500 ml jar: 44 g - 1,000 ml jar: 65 g - 1,500 ml jar: 72 g Available with or without thiosulfate sodium With liquid sodium thiosulfate (24 mg/l): Ideal to analyse water meant for human consumption, swimming pools, and any other water where chlorine may modify the composition of the sample while being transported. Empty, without thiosulfate: Ideal to sample water for physico-chemical analysis, as well as for other sampling requiring sterile bottles. capacity ml

case quantity

case weight

case volume

pallet quantity

2.68

0.036

1,584

3.72

0.076

960

2.68

0.036

1,584

3.72

0.076

960

0.110

960

mod.

code

description

sterile

1

282340

jar with thiosulfate

RADIATION

500

44

2

282341

jar with thiosulfate

RADIATION

1,000

48

3

282350

jar without thiosulfate

RADIATION

500

44

4

282351

jar without thiosulfate

RADIATION

1,000

48

5

282352*

jar without thiosulfate

RADIATION

1,500

48

4.05

*Minimum ordering Quantity: 1 pallet 7ECANSUPPLYANYOTHERCONCENTRATIONACCORDINGTOEACHCOUNTRYSSTANDARDS We can also dose thiosulfate in other jars from our catalogue. Optionally presented in individual bags if requested.

Please ask for customized labels

See Industrial Funnels on Chapter 13. Laboratory and industrial packaging.


1. MICROBIOLOGY

NEW Thiosulfate

Sterile bottles for water sampling Rectangular body and cap made of polyethylene. The minor sides are gripped for a better handling. The larger sides are ďŹ&#x201A;at for labelling. Tamper evident red cap with an internal security joint. Hermetical closure. Sterilised by ionisation. Each bottle is labelled specifying description, code, lot, and expiry date. Dimensions: 500 ml bottle: 83 x 65 x 135 mm - 1,000 ml bottle: 83 x 65 x 235 mm. Mouth diameter intern: 28 mm. Unitary weight (empty bottle): 500 ml bottle: 40 g - 1,000 ml bottle: 61 g. Available with or without thiosulfate sodium With liquid sodium thiosulfate: Ideal to analyse water meant for human consumption, swimming pools, and any other water where chlorine may modify the composition of the sample while being transported. Empty, without thiosulfate: Ideal to sample water for physico-chemical analysis, as well as for other sampling requiring sterile bottles. code

description

sterile

capacity ml

case quantity

case weight

case volume

pallet quantity

282320

bottle with thiosulfate

RADIATION

500

24

1.10

0.026

960

282321

bottle with thiosulfate

RADIATION

1,000

20

1.37

0.033

800

282323

bottle with thiosulfate

RADIATION

500

111

6.15

0.096

2,220

282323.BU

bottle with thiosulfate, individually wrapped

RADIATION

500

111

6,15

0,096

2.220

282324

bottle with thiosulfate

RADIATION

1.000

74

5,63

0,110

1.184

282324.BU

bottle with thiosulfate, individually wrapped

RADIATION

1.000

74

5,63

0,110

1.184

282330

bottle without thiosulfate

RADIATION

500

24

1.10

0.026

960

282331

bottle without thiosulfate

RADIATION

1,000

20

1.37

0.033

800

282333

bottle without thiosulfate

RADIATION

500

111

6.10

0.096

2,220

282334

bottle without thiosulfate

RADIATION

1,000

74

5.57

0.110

1,184

7ECANSUPPLYANYOTHERCONCENTRATIONACCORDINGTOEACHCOUNTRYSSTANDARDS In 250 ml or 125 ml bottles if requested. Optionally presented in individual bags if requested.

Please ask for customized labels

NEW NEW

43


44

1. MICROBIOLOGY Sodium thiosulfate sterile bags Whirl-Pak Specially designed for sampling chlorinated water: waste water, surface and irrigation water supplies, recreational waters, potable water. Contains 3 tablets of 10 mg sodium thiosulfate. As an added feature, these bags have a convenient. Write-on strip and markings for 100 ml and 300 ml measurements. These markings help the technician to collect the correct amount of water as required by the testing procedure. The write-on strip will accept virtually any writing instrument and minimizes ink smearing on the surface.

code

capacity ml

dimensions cm

case quantity

case weight

case volume

292604

for 300

11.5 x 23

200 x 5

3.6

0.024

CONTAINER

Long-handled dippers Polypropylene cup and polyethylene handle. For convenient sampling from tanks, vats, streams, ponds, lakes... These dippers are light, easy to use and portable. The polypropylene cups have threaded fittings that screw onto the handle. Two pouring spouts on the 500 ml dipper make it useful for left or right handed people to pour from either side. The end of the handle has a hook for hanging. Autoclavable container (up to 121°C). code

description

quantity

weight

volume

19575

91 cm handle, 500 ml container

1

0.30

0.001

19576

183 cm handle, 500 ml container

1

0.55

0.002

19577

container 500 ml (fits either handle)

1

0.30

0.005

Please ask for other lengths


1. MICROBIOLOGY e.coli

coliforme

non enteric bacteria

déhydrated culture medium

Water control: absence/presence of Coliforms (E. Coli) 125 ml bottle, made of PET, with white ribbed tamper evident cap made of PP. It contains dehydrated culture medium in order to detect the presence of coliforms in human consumption, industrial or leisure water (pools,…). Sterile by radiation. It allows the water testing directly on a bottle. The culture medium is based on chromogenic substrates, which make possible the coliform reading; and complemented with fluorogenic substrates, which presumptively identify the presence of E. Coli. Process: 1. A sample of water shall be taken in a sterile bottle, without additives, or with a neutralising (like thiosulfate) in case of chlorinated water. 2. A part of the sample (100 ml) is to the bottle containing the dehydrated culture medium and then shake gently until dissolved. 3. Incubate for 24 hours at 37ºC. 4. After incubation, the colour will reveal the results: A Yellow: the sample is negative for non enteric bacteria, total coliforms and E. Coli. B Muddy yellow: the sample is positive for enteric bacteria (not coliforms). C Turquoise blue: the presence of total coliforms is confirmed. 5. To discard escherichia place the sample under a UV light in a dark environment; if the sample gets fluorescent it contains E.coli; if there is not fluorescency, then it is another coliform, not E. coli. Every case includes two boxes with ten bottles each.

code

description

case quantity

case weight

case volume

282300

absence/presence kit

2 x 10

0.72

0.012

1

2

3

4

5 A

Free of bacteria

U.V.

col

i

ER

IL

E

B

e.

ST

Non enteric bacteria

C other coliform Coliform

45


46

2. MOLECULAR BIOLOGY


2. MOLECULAR BIOLOGY

47


48

2. MOLECULAR BIOLOGY Screw thread microtubes Made of autoclavable polypropylene, they can be used at extreme temperatures from -190 Âş C to +121Âş C. Two versions available: in transparent polypropylene, or opaque brown (designed to be used with light sensitive samples). CertiďŹ ed RNAse, DNAse and Pyrogen free. Tubes and caps can be centrifuged at 17,000 g. Caps are supplied separately, see below. Dimensions: 11 x 44 mm. mod.

4

2

volume ml

skirt

case quantity

case weight

case volume

0.009

Transparent polypropylene

7

3

code

8

1

409110.1

0.5

yes

1,000

1.34

2

409110.2

1.5

yes

1,000

1.34

0.009

3

409110.3

1.5

no

1,000

1.34

0.009

4

409110.4

2.0

yes

1,000

1.34

0.009 0.009

Brown polypropylene

1

5

6

5

409113.1

0.5

yes

1,000

1.34

6

409113.2

1.5

yes

1,000

1.34

0.009

7

409113.3

1.5

no

1,000

1.34

0.009

8

409113.4

2

yes

1,000

1.34

0.009

Caps for the above tubes 4

Made of polypropylene. .ATURALOROPAQUEBROWNCOLOURCODES409007.M and 409008.M), recommended for brown microtubes. Caps are available either with an attachment loop or without loop. Both models have a sealing O-ring (red) of silicone to ensure a positive leakproof seal. For sample identiďŹ cation, colour coding inserts can be placed upon caps (made of polypropylene). Cap dimensions: 13 x 8 mm.

2

3 1

mod.

7

6

5

8

code

description

case quantity

case weight

case volume

1

409007.N

cap with loop

1,000

0.40

0.003

2

409008.N

cap without loop

1,000

0.40

0.003

3

409007.M

brown cap with loop

1,000

0.40

0.003

4

409008.M

brown cap without loop

1,000

0.40

0.003

5

409111A

blue insert

500

0.58

0.003

6

409111AM

yellow insert

500

0.58

0.003

7

409111B

white insert

500

0.58

0.003

8

409111R

red insert

500

0.58

0.003

Internal or external thread cryovials Manufactured in autoclavable polypropylene, suitable for its freezing up to -196ÂşC (liquid nitrogen but in gas phase). Different versions availabe: s 3TERILEDNAse, RNAse and pyrogen free. With printed graduation and writing area. Available with internal or external thread. s .OSSTĂ?RILE EXTERNALTHREAD7ITHORWITHOUTPRINTEDGRADUATION#APISSUPPLIEDSEPARATELY SODIFFERENTCAPCOLOURSCAN be used.

Find more information in Chapter 10. Sample Storage and Cryogenics.


2. MOLECULAR BIOLOGY Screw thread microtubes Made of transparent polypropylene. 3UITABLE FOR USE IN LIQUID NITROGEN autoclave and for boiling applications, and can be used at temperatures down to –190 ºC. Certified RNAse, DNAse and Pyrogen free. Products ideal for long term sample storage. Withstand centrifugation at 20,000 g. The codes 409111/4, 409111/5 and 409111/6, with external moulded slots for better handling with gloves. Dimensions: 10.3 x 44.5 mm (except code 409111/2: 10.3 x 43.6 mm)

mod.

code

description

graduation

case quantity

case weight

case volume

°

500

0.70

0.002

500

0.60

0.002

500

0.60

0.002 New

500

0.60

0.002

500

0.60

0.002

500

0.60

0.002 New

1

409111/4

0.5 ml skirted

2

409111/2

1.5 ml

3

409111/5

1.5 ml skirted

4

409111/3

2.0 ml

5

409111/6

2.0 ml skirted

6

409111/7

2.0 ml skirted

3 °

3 °

3

1

2

3

Caps for the above tubes with o-ring Made of polypropylene of medical degree. Feature an internal O-ring to ensure leakproof seal. Dimensions 13.0 x 6.0 mm. Certified RNAse, DNAse and Pyrogen free.

4

code

colour

case quantity

case weight

case volume

409112/0

natural

500

0.024

0.0001

409112/1

blue

500

0.024

0.0001

409112/2

green

500

0.024

0.0001

409112/4

red

500

0.024

0.0001

409112/6

yellow

500

0.024

0.0001

Screw cap microtubes, with cap. Sterile Tubes and caps in medical grade, transparent polypropylene. The cap embodies a non-reactive ethylene-propylene joint. 3UITABLE FOR autoclave, liquid nitrogen (gaz) and boiling processes. Perfect for long term storage. Withstand temperatures from -190 ºC. Centrifugation Resistance: 20,000 g. DNAse, RNAse, DNA, PCR inhibitors and Pyrogen free. Graduated models feature a frosted area for writing. The non-graduated model incorporates an external grip for an easy handling. Microtubes are supplied capped, in bags of 50 units. code

409115/4

description 0.5 ml skirted

STERILE

409115/2 1.5 ml non skirted

STERILE

409115/6

2 ml skirted

STERILE

409115/3

2 ml non skirted

STERILE

graduation

case quantity

case weight

case volume

°

50 x 50

5.89

0.029

50 x 50

5.89

0.029

50 x 50

5.89

0.029

50 x 50

5.89

0.029

3 3 3

NEW

5

6

49


50

2. MOLECULAR BIOLOGY

1 Internal obturating ring 3ILICONE/ 2ING Gripped for a better handling Tamper evident ring

2

3

3CREWCAPUNTILLOCKINGRINGCLICKSOVERSERRATEDTUBENECK Contents are now protected until cap is removed and tamper-evident ring is detached.

Self standing, screw thread tamper evident microtubes Microtubes and caps are made of autoclavable ultra clear polypropylene. Ribbed cap with internal silicone O-ring for a positive leakproof seal. 3UPERFASTย—TURNTHREADDESIGN Tamper evident seal which notices if microtube has been opened. Rnase, Dnase and Pyrogen free. They can be used at extreme temperatures from โ€“196ยบ to +121ยบC. Resistance to centrifugation: 17,000 g. Microtube dimensions: 11 x 44 mm. Cap dimensions (with tamper-evident ring): 15 x 9 mm. Used on: s 4ESTOFFERTILITYAND$.!TESTING s 0ACKAGINGOFDIAGNOSTICKITSANDREAGENTS s #RIME,ABORATORIES mod.

code

volume ml

case quantity

case weight

case volume

1

409110.1T

0.5

1,000

2.06

0.013

2

409110.2T

1.5

1,000

2.06

0.013

3

409110.4T

2

1,000

2.06

0.013

See our wide range of microcentrifuge tubes on Chapter 7. Tubes and Microtubes


2. MOLECULAR BIOLOGY 0.2 ml Real Time PCR tubes Tubes made of polypropylene, featuring attached hinged caps. Flat caps are easily pierceable and offer optical quality, thus allowing their application in Real Time PCR. Available in strips of 8 tubes (see code 4095.1NP in the following page). CertiďŹ ed RNAse, DNAse and PCR inhibitors free. code

description

case quantity

case weight

case volume

4094.5N

PCR 0.2 ml QPCR tube

1,000

0.25

0.003

NEW

0.2 ml PCR tubes Tubes made of polypropylene, featuring attached hinged caps. Caps are ďŹ&#x201A;at and easily pierceable. 3EESTRIPSOFTHESETUBESONTHEFOLLOWINGPAGECODES4094.3N and 4094.4N). CertiďŹ ed RNAse, DNAse and PCR inhibitors free. code

colour

case quantity

case weight

case volume

4094.1N

natural

1,000

0.18

0.002

4094.1R

red

1,000

0.18

0.002

4094.1V

green

1,000

0.18

0.002

4094.1AM

yellow

1,000

0.18

0.002

4094.1A

blue

1,000

0.18

0.002

3EEMINIMUMORDERANDDELIVERYTIMEFOROTHERCOLORS

0.2 ml PCR tubes Made of polypropylene. Tubes with attached domed cap. CertiďŹ ed RNAse, DNAse and PCR inhibitors free. code

description

colour

case quantity

case weight

case volume

4095.9N

individual tube with cap

natural

1,000

0.18

0.002

51


52

2. MOLECULAR BIOLOGY 0.2 ml PCR tubes in strips

6 4, 6

1 2

3

Made of natural colour polypropylene. CertiďŹ ed RNAse, DNAse and pyrogen free. Different models available: 3TRIPOFORTUBESWITHITSCORRESPONDINGSTRIPOFORDOMED caps. 3TRIPOFTUBESWITHITSATTACHEDHINGEDSTRIPOFDOMEDCAPS 3TRIPOFTUBESWITHITSATTACHEDHINGEDSTRIPOFmATCAPS SUITABLE for Real Time PCR. 3TRIPOFTUBES 3TRIPOFmATCAPS SUITABLEFORReal Time PCR. Cap and tube strips allow easy handling and inventory of tubes and caps. Cap strips prevent cross-contamination from tube to tube. code

description

case quantity

case weight

case volume

1

4095.7N

STRIPOFmATCAPS

125 strips

0.09

0.0007

2

4095.6N

8 tube strip

125 strips

0.32

0.0026

3

4095.2N

8 tube strip + 8 domed cap strip

125 strips

0.29

0.0035

8 tube strip attached to mATCAPSTRIPS 8 tube strip attached to 8 domed cap strips 12 tube strip attached to 12 domed cap strips

125 strips

0.25

0.0027

125 strips

0.26

0.0027

80 strips

0.20

0.0035

New 4 5

4

6

4095.1NP 4095.1N 4095.4N

Ask for another colours. 5

0.2 ml PCR tubes in strips Tubes made of polypropylene, featuring attached hinged caps. 3UITABLEFORReal Time PCR. 3EEINDIVIDUALTUBESONPAGE4094.1N #APSAREmATANDEASILY pierceable. CertiďŹ ed RNAse, DNAse and Pyrogen free. In bags of 10 strips. Available in standard height (code 4094.3N) and low proďŹ le (code 4094.4N) that minimizes the effects of condensation and it allows working with small samples even less than 20 Îźl. code

description

case quantity

case weight

case volume

4094.3N

strip of 8 tubes and 8 attached caps

120 strips

2.72

0.036

4094.4N

strip of 8 tubes and 8 attached caps low proďŹ le

120 strips

2.20

0.028

0.2 ml PCR tubes in strips Made of autoclavable polypropylene. CertiďŹ ed RNAse, DNAse and pyrogen free. The strip includes 8 integral 0.2 tubes with ultra thin sidewalls and bottoms with individually attached caps. Available with either ďŹ&#x201A;at (needle pierceable) or dome-topped individually attached hinged caps. Every cap embodies a shield in order to prevent contamination when being opened. While easily opened and closed with one hand, their positive sealing will fully protect the contents from evaporation during the whole thermal cycle. These strips can be cut to any length while each tube has its own attached cap.

2

code

1

cap

colour

case quantity

case weight

case volume

1

4096.2N

mATCAP

natural

125 strips

0,40

0,055

2

4096.3N

domed cap

natural

125 strips

0,40

0,055


2. MOLECULAR BIOLOGY Real Time PCR Polimerase Chain Reaction is one of the most common techniques in every lab where Molecular Biology is being used. Its applications comprise Diagnostics, Genetic and Prenatal testing, Tissue Typing, Forensics, Pharmacological evaluation, among others. One of the most useful PCR techniques is the Real Time PCR, also known as Quantitative PCR (QPCR). Its main advantage in front of standard PCR is that it saves time as the quantiďŹ cation is being held during DNA ampliďŹ cation. 7HILESTANDARD0#2NEEDSAQUANTIFYINGPROCESSAFTER$.!AMPLIlCATION QPCR gives results in real time. PCR standard consumables are mainly made of transparent polypropylene. After some years of experience, laboratory technicians have found that crosstalking among transparent wells may affect the real time quantiďŹ cation. Opaque white wells and tubes have proved to avoid this well-to-well crosstalking, thus ensuring an exact and reliable quantiďŹ cation. The following pages include the newest innovations in this brand new area; like bi-mould technologies, which allow the manufacture of an opaque tube attached to an optically clear cap. White well technology is available in both strips of tubes or also 96 well plates.

0.2 ml, Real Time PCR tubes in strips Tubes made of polypropylene. 3TRIPOFTUBES EACHONEFEATURINGANATTACHEDmATCAP 3TRIPS ARE MANUFACTURED BY BIOMATERIAL MOLDING SO THE TUBES are made of opaque white PP, while caps are compounded of transparent, optically clear PP. Opaque white tubes perform the highest performance in Real Time PCR, as they avoid crosstalking between wells. 3PECIALLYCONCEIVEDFORReal Time PCR. Caps are easily pierceable. CertiďŹ ed RNAse, DNAse and PCR inhibitors free. In bags of 10 strips. code

description

case quantity

case weight

case volume

4094.5BP

strip of 8 white 0.2 ml QPCR tubes and 8 attached caps

120

0.26

0.004

NEW

0.2 ml, Real Time PCR tubes in strips Tubes made of polypropylene. 3TRIP OF  TUBES FEATURING AN ATTACHED STRIP OF  mAT CAPS 3TRIPS are manufactured by biomaterial molding, so the tubes are made of opaque white PP, while caps are compounded of transparent, optically clear PP. Opaque white tubes perform the highest performance in Real Time PCR, as they avoid crosstalking between WELLS3PECIALLYCONCEIVEDFORReal Time PCR. Caps are easily pierceable. CertiďŹ ed RNAse, DNAse and Pyrogen free. code

description

case quantity

case weight

case volume

4095.1BP

strip of 8 white 0.2 ml QPCR tubes and 8 caps

125

0.23

0.002

NEW

53


54

2. MOLECULAR BIOLOGY Graduated 0.5 ml PCR tubes Made of autoclavable polypropylene. CertiďŹ ed RNAse, DNAse and pyrogen free. !TTACHEDHINGEDCAPSAREmATANDEASILYPIERCEABLE Tubes are easily opened and closed with one hand. Tubes have moulded-in graduations in 0.1 ml increments from 0.1 up to 0.6 ml, and a frosted panel on their side for writing or labelling. code

colour

case quantity

case weight

case volume

4094.2N

natural

1,000

0.30

0.002

4094.2R

red

1,000

0.30

0.002

4094.2V

green

1,000

0.30

0.002

4094.2AM

yellow

1,000

0.30

0.002

4094.2A

blue

1,000

0.30

0.002

Graduated 0.5 ml PCR tubes 3AMEFEATURESASTHEABOVETUBES BUTWITHADOMEDCAP code

colour

case quantity

case weight

case volume

4095.5N

natural

1,000

0.38

0.004

384 wells plate skirted Made of transparent polypropylene. 384 wells plate. Each well has a capacity of 50 Îźl. A low rim around the top of each well helps to prevent accidental cross-contamination All wells are thin walled for an excellent thermal transfer. Orientation cut is at position A 24 (upper right). A black printed alphanumeric grid helps sample identiďŹ cation. RNAse, DNAse, DNA and PCR inhibitors free. 3UITABLEFOR0#2ANDreal time PCR (QPCR). Dimensions according to the SBS standard. code

description

case quantity

case weight

case volume

900384

384 PCR well plate

10 x 10

3.20

0.026

Minimun order quantity: 10

NEW


s

s

s s s s

s

s s s

s s s s s s s s s s

s s s

50 Îźl

s s

s s s s s

s s s s s s s s s s s s s s s s s

9000098 unskirted

900095 white, skirted 900093 black, skirted

s

s s s s

s s s s s s s s

s s s s s

s

s

s s

s s s s s

s

s s s s s s

s s s

s s s s s s s s s s s s s s s s s s s s s s

900384 skirted

900123 skirted

900113B semi skirt

900112 semi-skirt

900122 semi skirt

Well Shape Standard well. (Overall height approx. 21mm, max. capacity approx. 350 Îźl) Low proďŹ le well. (Overall height approx. 16mm, max. capacity approx. 200 Îźl) Manufacturer Model Apollo Brand ATC401 Applied Biosystems Thermal Cyclers 2700 9600 9700 9800 "Fast" Veriti 0.1 ml Veriti 384 "Real Time" Cyclers 5700 02)3- 7300 7500 7500 "Fast" 7700 3TEP/NEPLUS 3EQUENCERS 02)3- 02)3- 8, 3700 02)3-8, Amersham 3EQUENCERS MegaBace 500 MegaBace 1000 MegaBace 4000 Beckman 3EQUENCERS CEQ Biometra Thermal Cyclers Uno Uno II T1 Thermal Cycler Tgradient Trobot Bio-Rad/MJ Research Thermal Cyclers Gene Cycler PTC-100 PTC-200 PTC-220/221 PTC-225 Tetrad Dyad/Dyad Disciple iCycler MyCycler Mini Gradient Personal $.!%NGINEFAMILY #3 â&#x20AC;&#x153;Real Timeâ&#x20AC;? Cyclers Opticon/Opticon2 Chromo-4 iCycler MyiQ iQ5 CFX96 CFX384 3EQUENCERS "ASE3TATION

900110 unskirted

PCR Plates â&#x20AC;&#x201C; COMPATIBILITY CHART

900111 and 900111B

2. MOLECULAR BIOLOGY

s s

s s s s s s s s s s s s

s s s s

s s s s s s

s s s s

s s s s

s s s s s s s s s

s s s s s

s s s s s s

s s

s

55


Eppendorf

Mastercycler Mastercycler Gradient Mastercycler ep Mastercycler M384

"Real time" Thermal Cyclers

Mastercycler ep Realplex

Ericom

Power Block I Deltacycler I Deltacycler II 3INGLE"LOCK Twin Block

Esco Flexi

3WIFT Gene Genius

G-Storm

'3 '3 '38 '38S

MWG

Primus 96 Primus 384 4HE1,IFECYCLER

Stratagene

Robocycler 96 Gradient Cycler Robocycler Gradient

"Real Time" Cyclers

Mx4000 and Mx3000 Mx3005P™

TaKaRa

TP240 TP3000

Techne

Touchgene Cyclogene Genius Genius Quad Genius (TC412) Flexigene Touchgene X Touchgene Gradient ITC512)

"Real Time" Cyclers

Quantica

Thermo Hybaid

0#23PRINT -"33ATELITE3YSTEM Px2 and PxE PCR Express and Omni-E Touchdown Omnigene

Transgenomic 3EQUENCERS

7!6%3YSTEM

Roche "Real Time" Cyclers

,IGHT#YCLER

s

s s s s s s s s

s s s s s s s

s

s s s s s s s s s s s s s s s s s s s s s s

s

s s s s s s s s s s s s s

s

s s s s s s

s s s s s s s s s s s s s s s s

50 μl

s s

s s s s

s

s s s s s s s s s s s s s s s s s s s s s s

s

s

s s s s s

s s s s s s s s s

s s s s s s s s s s s

s s s s s s

s s

s

900095 white, skirted 900093 black, skirted

9000098 unskirted

900384 skirted

900123 skirted

900113B semi skirt

900112 semi-skirt

Well Shape Standard well. (Overall height approx. 21mm, max. capacity approx. 350 μl) Low profile well. (Overall height approx. 16mm, max. capacity approx. 200 μl) Manufacturer Model PalmCycler 96 Corbett Research (Qiagen) PalmCycler 384

900122 semi skirt

PCR Plates – COMPATIBILITY CHART

900110 unskirted

2. MOLECULAR BIOLOGY 900111 and 900111B

56

s

s s

s

s

s

s

s s s s

s

s

s s s

s s s

s s s s s s s s s s s s s s s s s s

s s s s s

s s s s s s s s s s s s s s s


2. MOLECULAR BIOLOGY 96-well ďŹ&#x201A;exible PCR plate Made of autoclavable polypropylene. It is suitable for both real time and standard PCR thermocyclers. This 96-well PCR plate is thin-walled for rapid thermal transfer. Flexible, the plate could be easily cut into sections of 24, 32 or 48 tubes. An alphanumeric grid helps sample identiďŹ cation, and to facilitate orientation, the bottom right corner of the plate is cut away. Dimensions: 120 x 73 x 20 mm. CertiďŹ ed RNAse and DNAse free. Dimensions according to the SBS standard

code

colour

case quantity

case weight

case volume

900098

natural

10

0.17

0.002

96-well low proďŹ le skirted PCR plate Made of polypropylene. Each â&#x20AC;&#x153;low proďŹ leâ&#x20AC;? well has a capacity of 200 Îźl. A low rim around the top of each well helps to prevent accidental cross-contamination and makes easy the sealing with ďŹ lm. All wells are thin walled for an excellent thermal transfer. This plate has a skirt approximately 15 mm high that can be ďŹ lled USING AUTOMATIC mUID HANDLING SYSTEMS OR STANDARD MULTICHANNEL pipettors. A black printed alphanumeric grid helps sample identiďŹ cation. Orientation cut is at position A 12 (upper right). RNAse, DNAse, DNA and PCR inhibitors free. 3UITABLEFOR0#2ANDREALTIMEPCR (QPCR). Dimensions according to the SBS standard. code

colour

case quantity

case weight

case volume

900123

natural

10 x 10

3.18

0.030

Opaque skirted 96 well PCR plate Made of autoclavable polypropylene. Alphanumeric identiďŹ cation. The skirt around the plate provides a labelling area. Conical-bottomed wells. The plate can be handled by robotic equipment and is ideal with automated pipetting systems. To facilitate orientation, the bottom right corner of the plate is cut away. Well dimensions: 5.5 mm. Well depth: 14 mm. Code 900093"LACKPLATEFORmUORESCENT0#2 Code 900095: White plate for luminescence (optical absorption) PCR. Dimensions: 126 x 84 x 15 mm. CertiďŹ ed RNAse and DNAse free. code

description

case quantity

case weight

case volume

900093

96 well black plate

5 x10

1.20

0.008

900095

96 well white plate

5 x 10

1.20

0.008

Minimun order quantity: 10.

NEW

57


58

2. MOLECULAR BIOLOGY 96 well standard plate

NEW

Made of transparent polypropylene. 96 wells standard plate with a capacity of 350 Îźl each well. A low rim around the top of each well helps to prevent accidental cross-contamination and makes easy the sealing with ďŹ lm. All wells are thin walled for an excellent thermal transfer. )TSmEXIBLEDESIGNALLOWSTHEPLATETOBEEASILYCUTINTOSECTIONSOF 24, 32 or 48 tubes. A black printed alphanumeric grid helps sample identiďŹ cation. Orientation cut is at position A 12 (upper right). RNAse, DNAse, DNA and PCR inhibitors free. 3UITABLEFOR0#2ANDREALTIMEPCR (QPCR). Dimensions according to the SBS standard.

code

colour

case quantity

case weight

case volume

900111

natural

10 x 10

3.18

0.030

96-well low proďŹ le PCR plate Made of transparent polypropylene. ,OWPROlLEWELLMMHIGH  Perfect to work with samples of 100 Îźl or even less. A low rim around the top of each well helps to prevent accidental cross-contamination. The orientation cut is at position H 12 (lower right). A printed alphanumeric grid helps sample identiďŹ cation. DNAse, RNAse, DNA and PCR inhibitors free. It is suitable for both standard or Real Time PCR. Dimensions according to the SBS standard.

code

description

case quantity

case weight

case volume

900110

low proďŹ le PCR plate

5 x 20

1.9

0.016

96 well semi-skirt plate Made of transparent polypropylene. This plate has a semi skirt Âą7.5 mm high. Each well has a capacity of 200 Îźl and embodies a low rim around its top which prevents accidental cross-contamination and it makes easy the sealing with foils. Orientation cut is at position A 12 (upper right). Alphanumeric identiďŹ cation printed in black. DNAse, RNAse, DNA and PCR inhibitors free. Dimensions according to the SBS standard.

code

description

case quantity

case weight

case volume

900122

semi-skirt PCR plate

10

0,32

0,001


2. MOLECULAR BIOLOGY 96 wells white standard plate Made of white polypropylene. 96 wells standard plate. Each well has a capacity of 350 Îźl. A low rim around the top of each well helps to prevent accidental cross-contamination and makes easy the sealing with ďŹ lm. All wells are thin walled for an excellent thermal transfer. )TSmEXIBLEDESIGNALLOWSTHEPLATETOBEEASILYCUTINTOSECTIONSOF 24, 32 or 48 tubes. Orientation cut is at position A 12 (upper right). A black printed alphanumeric grid helps sample identiďŹ cation. RNAse, DNAse, DNA and PCR inhibitors free. 3UITABLEFOR0#2ANDreal time PCR (QPCR). $IMENSIONSACCORDINGTOTHE3"3STANDARD code

description

case quantity

case weight

case volume

900111B

white PCR plate

10 x10

3.18

0.030

NEW

Minimum order quantity: 10.

96 wells low proďŹ le, semi-skirted white plate Specially designed for Roche thermocycler. -ADE OF WHITE POLYPROPYLENE 3EMI SKIRT hLOW PROlLEv  WELL Each well has a capacity of 200 Îźl. A low rim around the top of each well helps to prevent accidental cross-contamination and makes easy the sealing with ďŹ lm. Orientation cut is at position H 12 (bottom right). A black printed alphanumeric grid helps sample identiďŹ cation. RNAse, DNAse, DNA and PCR inhibitors free. 3UITABLEFOR0#2ANDreal time PCR. Dimensions according to the SBS standard.

code

description

case quantity

case weight

case volume

900113B

semi-skirt PCR plate

10 x 10

3.18

0.030

NEW

Minimum order quantity: 10.

96 well, low proďŹ le, semi- skirted plate Specially designed for ABI â&#x20AC;&#x153;Fastâ&#x20AC;? thermocycler. Made of transparent polypropylene. 3EMI SKIRThLOWPROlLEvWELL Each well has a capacity of 200 Îźl. A low rim around the top of each well helps to prevent accidental cross-contamination. Orientation cut is at position A 1 (upper left). A black printed alphanumeric grid helps sample identiďŹ cation. RNAse, DNAse, DNA and PCR inhibitors free. 3UITABLEFOR0#2ANDREALTIMEPCR (QPCR). Dimensions according to the SBS standard. code

description

case quantity

case weight

case volume

900112

semi-skirt PCR plate

10 x 10

3.18

0.030

Minimum order quantity: 10.

NEW

59


60

2. MOLECULAR BIOLOGY PCR sealing mat Manufactured from a non reactive rubber, this PCR sealing mat ensures a secure, leak free seal during the PCR cycling process. It is designed to seal 96 well PCR plates, but may also be cut to ďŹ t 24/32/48 well plates. The mat is marked â&#x20AC;&#x153;this side upâ&#x20AC;? for a proper positioning into the plate (sharp cone side up). This sealing mat may be sterilised in an autoclave or cleaned by immersion in a bleach solution. The PCR sealing mat can be re-used as often as required. DNAse, RNAse, DNA and PCR inhibitors free. code

description

case quantity

case weight

case volume

900305

PCR sealing mat

10 x 5

1.20

0.007

Adhesive sealing ďŹ lm for PCR plates 3EALING lLM FOR USE WITH MICROPLATES 0#2 PLATES AND MICROTITER plates. Advantages: 1. Minimises the risk of contamination or reagent spillage during %,)3!OR0#2PROCESSES 2. Minimises the risk of contamination from tube to tube and from plate to plate. 3. Prevents sample evaporation. A 5 mm wide strip (opaque white) at the lateral edges of the ďŹ lm helps pull the ďŹ lm from its protective paper and prevents it sticking onto ďŹ ngers. The ďŹ lm is thermostable and functional from â&#x20AC;&#x201C;70ÂşC to +95 ÂşC at 75% humidity. RNAse and DNAse free. $-3/RESISTANT We recomend to use the â&#x20AC;&#x153;rollerâ&#x20AC;? 900330 to ensure a perfect seal. code

description

case quantity

case weight

case volume

900300

adhesive ďŹ lm

1 x 100

0.23

0.001

900330

sealing roller

1

0.014

0.001

Aluminium sealing foil This type of material is ideal for manual sealing during PCR work, microtiter plates or manipulation and ďŹ le plates. For high throughput applications from -86 ÂşC to + 95 ÂşC. Adhesive backing. Pierceable with a pipette tip for easy access to sample. $-3/RESISTANT It is recommended to use the â&#x20AC;&#x153;rollerâ&#x20AC;? code 900330 for ensuring a perfect sealing, eliminating the danger of evaporation. RNAsa, DNAsa and DNA free.

code

description

case quantity

case weight

case volume

900320

aluminium foil

1 x 100

0.320

0.001

900330

sealing roller

1

0.014

0.001


2. MOLECULAR BIOLOGY Deep well plate (96 square wells or 12 rectangular channels)

NEW

Made of medical grade polypropylene. A printed alphanumeric grid helps sample identiďŹ cation, and to facilitate orientation the bottom left corner of the plate is cut away. Conical bottom wells. Widely used for liquid handling and storage, whether with manual pipetting or robotic handling. Withstand temperatures from -90ÂşC to +121 ÂşC (Autoclave). Dimensions according to SBS. CertiďŹ ed free from detectable RNase, DNase, DNA and PCR inhibitors. Codes 900195 and 900196 are supplied in 2 bags of 5 units each. Code 900197 proves to be extremely convenient as a reservoir THANKS TO ITS  HIGH VOLUME CHANNELS 3UPPLIED IN A BAG OF lVE units. Code 900309 is a sealing mat manufactured from autoclavable silicone. Exclusive use with the square well plates (900195 and 900196). Pierceable so the sample can be aspirated without removing the mat. 3UPPLIEDINABAGOFlVEUNITS mod.

code

description

case quantity

case weight

case volume

1

900195

96 well plate 2.2 ml

2x5

1.27

0.007

2

900196

96 well plate 1.1 ml

2x5

0.95

0.007

3

900309

sealing mat for 96 squared wells

5

0.14

0.001

4

900197

12 channel plate 22 ml

5

0.45

0.005

3 1

2

4

96 deep Deep well plate (96 round wells) Made of medical grade polypropylene, it is comprised of 96 round bottom wells, each one of 1.2 ml capacity. Printed alphanumeric grid helps sample identiďŹ cation, and to facilitate orientation the bottom right corner of the plate is cut away. Widely used for liquid handling and storage, whether with manual pipetting or robotic handling. It withstands temperatures from -90ÂşC to +121ÂşC (autoclave). Dimensions according to SBS. CertiďŹ ed free from detectable RNase, DNase, DNA and PCR inhibitors. It can be sealed with the plastic sealing ďŹ lm 900300 or the pierceable aluminum foil 900320. code

description

case quantity

case weight

case volume

900155

96 well plate 1.2 ml

10

1.27

0.007

96 deep well plate (square well, round bottom) Made of polypropylene. The 2.1 ml well capacity (2.0 when capped) plate is used mainly for compound storage and enzyme assays. An alphanumeric grid helps sample identiďŹ cation, and to facilitate orientation the bottom right corner of the plate is cut away. $-3/RESISTANT#ANBECENTRIFUGEDUPTOG Withstand temperatures up to -150 ÂşC. Autoclavable. Each well measures 8.3 x 8.3 mm. Plate dimensions: 41.6 mm high x 127.8 mm long x 85.5 mm wide. We recommend to protect the samples with the sealing mat code 900306$-3/RESISTANT  description

case quantity

case weight

case volume

900170

natural

4

0.47

0.002

900306

sealing mat

24

0.15

0.0002

code

NEW

61


2. MOLECULAR BIOLOGY

44 mm 8 mm 72 mm

Sample storage system 96 round bottom tubes, supplied in twelve strips of eight tubes each, held in a rack with lid. Rack, lid, tubes and caps are made of autoclavablePOLYPROPYLENE MANUFACTUREDWITHTHE3"3STANDARDFOOTPRINT#OMPATIBLEWITHALLROBOTICAPPLICATIONS and multichannel pipetting systems. Alphanumeric numbered wells, indelibly printed in black, allowing identiďŹ cation in short light conditions. DNAse, RNAse, DNA and PCR inhibitors free. 5SEDFORSERIALDILUTIONS MIXING STORAGEANDHARVESTINGOFCELLS CELLGROWTHFORCELLCULTUREASSAYSAND$.!SCREENING AND as an ideal long-term storage system. Caps are sold separately in strips of eight units; every cap has a tag to make an easy opening and closing. Tube dimensions (height): 8 x 44 mm Rack dimensions (with lid): 128 x 86 x 48 mm code

description

case quantity

case weight

case volume

409009

rack with 96 tubes (8 x 12)

10

1.63

0.0140

409010

tubes of 8 tubes each

125 strips

0.73

0.0073

409011

strips of 8 tubes each

125 strips

0.14

0.0012

409012

loose tubes

1,000

0.73

0.0073

8,7 mm

44,4 mm

62

Sample storage system Compact sample storing system. It consists on a blue rack with a translucent lid, holding 96 loose round bottom tubes (1,2 ml) arranged in 8 x 12. Autoclavable and stackable, it resists up to â&#x20AC;&#x201C;100ÂşC, and embodies a moulded alphanumeric identiďŹ cation. Rack, lid and tubes made of polypropylene. Caps made of low density polyethylene. Caps are sold apart in strips of eight units; every cap has a tag to make an easy opening and closing. Tube dimensions (height, closed): 8,7 x 45 mm. Rack dimensions (with lid): 118 x 82 x 50 mm. DNAse, RNAse free case quantity

case weight

case volume

rack with 96 tubes (8 x 12)

10

1.24

0.0100

strips of 8 caps each

120 strips

0.01

0.0001

tubes in bulk

1,000

1.00

0.0500

code

description

409008 409005

New 409008.1


2. MOLECULAR BIOLOGY Storage rack with 2 ml tubes Compatible with most robotic Workstation, this polypropylene storage rack can be used with most cell harvesters and leading 8 & 12 - chanel pipettors. It contains 96 removable polypropylene square tubes in a 8 x 12 conďŹ guration, each having a 2.1 ml capacity (2 ml when capped). Although the tubes are square, the bottom is round to facilitate emptying. Tubes and rack are autoclavable and they are ideal for storage of blood and other biological samples at temperatures from -30°C up to 70°C. Racks are stackable to save storage space. !CCORDINGTO3"3STANDARD code

description

case quantity

case weight

case volume

418003

96 well storage rack with tubes

10

1.81

0.008

Sample storage system It consists on a white rack and a transparent lid, with 96 tubes (12 x 8) 1.2 ml (capped, 1.1 ml). Tubes and rack are manufactured in polypropylene, being autoclavable. Caps in non autoclavable polyethylene. Caps are acquired apart, in strips on eight units. It is ideal to work with robots and multichannel pipetting systems, as well as for sample transport, storage, or freezing (it can withstand up to â&#x20AC;&#x201C;80 ÂşC). It stands up the majority of chemical agents. Both lid and rack embody an alphanumeric identiďŹ cation. The top left edge of the lid is cut for an exact orientation. Tube dimensions (capped): 9 x 48 mm. Rack dimensions (with lid): 126 x 81 x 53 mm. !CCORDINGTO3"3STANDARD case quantity

case weight

case volume

rack with 96 tubes (8 x 12)

10

1.81

0.0080

408002

tubes of 8 caps each

120 strips

0.60

0.0040

408005

strips of 8 caps each

120 strips

0.01

0.0001

408003

loose tubes

5 x 960

0.80

0.0200

code

description

409004

63


64

3. HAEMATOLOGY AND BIOCHEMISTRY


3. HAEMATOLOGY AND BIOCHEMISTRY

65


66

3. HAEMATOLOGY AND BIOCHEMISTRY

100% ity bil a Tr cea

100% Traceability Our blood collection tubes are individually identiďŹ ed with its code, LOT number and expiry date, so the traceability from its manufacture to the ďŹ nal consumer is guaranteed. Raw materials traceability. Process traceability. Final product traceability. We manufacture our blood collection tubes by following: Guideline 98/79/CE â&#x20AC;&#x201C;Royal decree 1662/2000 referred to the product used to â&#x20AC;&#x153;in vitroâ&#x20AC;? diagnosis. ISO 6710 Single use containers for blood collection. UNE-EN ISO 14971 for the Risks Management of Sanitary Products. UNE-EN 980 for Labeling and Marking. UNE-EN ISO 13485, medical devices - quality management systems.

Expiry date our tubes, anticoagulants and other s s s s s s s s s

Serum tubes (granules and gel): ................................. 2 years Serotub with granules and preservative:.................... 1 year Lithium heparin: ........................................................... 2 years Iodoacetate heparin:.................................................... 1 year Edta: .............................................................................. 2 years Citrate for coagulation: ............................................... 15 months Anticoagulants in containers:...................................... 2 years Thrombocyte count and osmotic brittleness: ............. 2 years Reticulocyte vital staining:........................................... 2 years

Procedures and controls During the manufacturing process a lot of controls and guides are used, insisting on: s2EPRODUCIBILITYDOSINGCONTROL s1UANTITYANDQUALITYDOSINGCONTROL(ďŹ&#x201A;ame photometer). s 7ATERTIGHTNESS CONTROL (vacuum, centrifugation and ďŹ&#x201A;uorescein method). Each case includes a brochure with recommendations of use.


3. HAEMATOLOGY AND BIOCHEMISTRY Serum tubes with clot accelerator and gel serum separator,

c (IVD)

Made of a clear polypropylene, supplied capped and labelled with an inert polyethylene cap. The tubes are designed and processed to permit a fast serum and blood clot separation. Each tube contains a special inert additive which accelerates the coagulation, and the result is a fast clot retraction. The coagulation speed is, doubtlessly, much higher than the obtained with the glass tubes or the other existing tubes on the market. The inert gel is located, after centrifugation, between the clot and the obtained serum and it works as a totally watertight barrier. The ergonomic features of the cap design results in a very reliable and easy-to-use cap. On the label of each tube the lot number, expiry date and volume are printed. Supplied in plastic racks. We strongly recommend its usage for biochemistry, routine tests, special biochemistry, markers, hormones, immunology (tube without anticoagulants).

description

case quantity

case weight

case volume

pallet quantity

600801

13 x 75 round for 4 ml

12 x 100

5.80

0.033

48

600800

15 x 100 round for 9 ml

6 x 120

6.00

0.040

36

code

Serum tubes with clot accelerator and gel serum separation Clotting speed increased: with our the tubes processed with gel serum separator and accelerator we improve the clotting speed achieving a 20-25% advantage over glass tubes. The serum is obtained after 12 minutes, depending on the particular working conditions. Serum volume increased: The volume obtained is higher than the obtained with granules tubes or glass tubes, achieving an advantage around 20%. The gel serum separator tube is the preferred option when analysis requires maximum serum yield from the blood sample.

minutes

CLOTTING SPEED CHART

25 20 15 10 5



 

Test 1 mcl

2000 1500

Note: Before using, the gel serum separator remains at the bottom, even when the tube is bent.

 





 



0 Test 2

Test 3

SERUM VOLUME CHART

2500 Recommended in case the objective is to obtain larger serum volume.









 

1000



500 0 

Glass tube



Gel + accelerator



Granules + Accelerator

Test 1

Test 2

Test 3

67


68

3. HAEMATOLOGY AND BIOCHEMISTRY Serum tubes with clot accelerator and granule serum separator

c (IVD)

Made of a clear polypropylene, supplied capped and labeled with an inert polyethylene cap. The tubes are designed and processed to permit a fast serum and blood clot separation. Each tube contains a special inert additive which accelerates the coagulation, and the result is a fast clot retraction. The coagulation speed is much higher than the obtained with the glass tubes or the other existing tubes on the market. The inert granules are rounded to avoid cellular lesions during centrifugation and minimize the risk of haemolysis. These granules are located between the clot and the separated serum working as a retaining wall. It assures a comfortable pipette action or serum decanting.(It isnâ&#x20AC;&#x2122;t a watertight barrier). The ergonomic features of the cap design results in a very reliable and easy-to-use cap. On the label of each tube the lot number, expiry date and volume are printed. Supplied in plastic racks.

code

description

case quantity

case weight

case volume

pallet quantity

600400

13 x 75 round for 4 ml

12 x 100

5.10

0.033

48

600300

16 x 100 round for 9 ml

6 x 120

5.60

0.040

36

707094*

bottle of 750 g with separator granules

20

17.50

0.046

32

* Not c Product

minutes

20 15



10

 

5

Serum tubes with clot accelerator and granules

CLOTTING SPEED CHART

25



 



  



0 Test 1 mcl

2000

1000

Test 3

Serum volume increased: The volume obtained is a little higher than the obtained with glass tubes but fewer than the obtained with gel serum separator tubes.

SERUM VOLUME CHART

2500

1500

Test 2

Clotting speed increased: with our the tubes processed with granules and accelerator we achieve a clotting speed higher than the obtained not only with glass tubes but also with gel tubes. The advantage achieved is around 40-50 % over glass tubes. Serum can be obtained starting from 12 minutes, depending on working conditions.

 



 

Due to its effectiveness and low price this product is highly recommendable for all routine serum tests.

  





Test 2

Test 3

500 0 Test 1



Glass tube



Gel + accelerator



Granules + Accelerator


3. HAEMATOLOGY AND BIOCHEMISTRY c (IVD)

Serum glucose serotub

Made of a clear polypropylene, supplied capped and labeled with an inert polyethylene cap. To permit a fast serum separation of the blood clot, the tubes have an inert additive inside which speeds up the coagulation. This accelerator allows a mixture with the blood almost immediate and avoids the unnecessary sample dilution. The coagulation speed is much higher than the obtained with the glass tubes or the other existing tubes on the market. The inert granules are rounded to avoid erythrocytes lesions during centrifugation and minimize the risk of haemolysis. These granules are located between the clot and the separated serum working as a retaining wall. It assures a comfortable pipette action or serum decanting. (It isn’t a watertight barrier). Inside the tube there is also a little amount of a glucose preservative, lithium iodoacetat, which maintains the sample stable up to 6 days and allows to make most of the biochemical measurements with an only tube (the exceptions are CPK and Lithium); so it’s possible to save one of the two tubes used normally to determine routine tests and glucose respectively. With the ergonomic features of the cap the design achieves a high reliability without avoiding the main characteristic of the cap: it’s very easy to use. On the label of each tube the lot number, expiry date and volume are printed. Presentation: packed in black bags in order to maintain them out of the light because the iodum is photosensitive. Keep these tubes at a temperature bellow 35 ºC. Supplied in plastic racks.

code

description

case quantity

case weight

case volume

pallet quantity

600602

13 x 75 for 4 ml blood

12 x 100

5.10

0.033

48

Ask for minimum quantity and delivery time for tube 16 x 100, 10 ml blood.

See the explanations about the standard gel and granules tubes.

Silicone tourniquet 0.8 thick and 19 mm wide. No toxic. Autoclavable. description

quantity

weight

volume

GS-01

roll of 50 meters

1 x 50

0.85

0.001

GS-02

box with 10 bands 0.5 m long each

1

0.10

0.001

code

69


70

3. HAEMATOLOGY AND BIOCHEMISTRY c (IVD)

Lithium heparin tubes

Made of a clear polypropylene, supplied capped and labeled, indicating filling line, lot number, and expiry date. The anticoagulant pulverization inside the tube optimizes the mixture and avoids the unnecessary blood dilution. The anticoagulant mechanism is the inhibition of the thrombin action. Supplied in plastic racks.

code

type of coagulant

601802

spray

601803

spray

601810

spray

description 13 x 75 round for 4 ml blood 13 x 75 round for 2.5 ml blood 16 x 100 round for 10 ml blood

case quantity

case weight

case volume

12 x 100

4.30

0.033

12 x 100

4.30

0.033

6 x 120

5.50

0.040

Pallet quantity code 601802 and 601803: 48 cases. Pallet quantity code 601810: 36 cases.

Iodoacetate lithium + heparin lithium tubes

c (IVD)

Made of a clear polypropylene, supplied capped and labeled. On the label of each tube a fill line indicates the level of blood required, as well is printed the lot number and expiry date. The anticoagulant and preservative pulverization inside the tube optimizes the mixture and avoids the unnecessary blood dilution. The blend anticoagulant-glucose preservative is ideal for biochemical tests, so it’s possible to determine most of the biochemical parameters with only one tube and preserve the product stable for 6 days. It is recommended to maintain the tubes in a dark and cool place (at room temperature). The tubes are packed in black bags in order to maintain them out of the light because the iodum is photosensitive. Supplied in plastic racks. code

type of coagulant

602002

spray

602003

spray

Pallet quantity: 48 cases.

description 13 x 75 round for 4 ml blood 13 x 75 round for 2.5 ml blood

case quantity

case weight

case volume

12 x 100

4.30

0.033

12 x 100

4.30

0.033


3. HAEMATOLOGY AND BIOCHEMISTRY c (IVD)

Edta: tripotassium

Made of clear polypropylene, supplied capped and labeled. Tetraceticetilendiamin acid, a tripotassium salt, works as an anticoagulant thanks to its capacity to ďŹ x the blood calcium. Because the anticoagulant is pulverized, it allows a mixture with the blood almost immediate. The quantity of additive is very small so there are no dilution mistakes. (this may occur in the tubes with big additive liquid solution volumes). There is no risk of anticoagulant loss when uncapping because it is adhered to the tube walls. The cap shape, both internal and external design, assures a comfortable and reliable capping. A volume indication mark, lot number and expiry date on the label of each tube, allows to assure the traceability of the product. Supplied in plastic racks. code

type of coagulant

601612

spray

601613

spray

601603

spray

601702

spray

description 15 x 50 fat for 4 ml blood 15 x 50 ďŹ&#x201A;at for 2.5 ml blood 13 x 75 round for 2.5 ml blood 13 x 75 round for 4 ml blood

case quantity

case weight

case volume

10 x 120

4.60

0.033

10 x 120

4.60

0.033

12 x 100

4.30

0.033

12 x 100

4.30

0.033

Pallet quantity code 601612 and 601613: 40 cases. Pallet quantity code 601603 and 601702: 48 cases.

Edta: tripotassium. Rubber cap

c (IVD)

Tubes made of clear polypropylene, supplied capped and labeled. Mauve, pierceable (but not pierced) and plugged cap made of thermoplastic rubber. Suitable for hematological automatic machines. The label indicates code, volume, lot number and expiry date, assuring total traceability. Tubes supplied in trays of 100 units.

mod.

code

type of coagulant

1

611603

liquid

2

611604

liquid

description 13 x 75 for 3 ml blood 13 x 80 for 3 ml blood

case quantity

case weight

case volume

10 x 100

5.30

0.034

8 x 100

3.00

0.030

Pallet quantity code 611603: 48 cases. Pallet quantity code 611604: 50 cases.

2

1

1

2

71


72

3. HAEMATOLOGY AND BIOCHEMISTRY Blood-plasma. Edta tubes: dipotassium

c (IVD)

Made of clear polypropylene, supplied capped and labelled. Tetraaceticetilendiamin acid, a dipotassium salt, works as an anticoagulant thanks to its capacity to fix the blood calcium. Because the anticoagulant is pulverized, it allows a mixture with the blood almost immediate. The quantity of additive is very small so there are no dilution mistakes (this may occur in the tubes with big additive liquid solution volumes). There is no risk of anticoagulant loss when uncapping because it is adhered to the tube walls. The cap shape, both internal and external shape, assures a comfortable and reliable capping. A volume indication mark, lot number and expiry date on the label of each tube, allows to assure the traceability of the product. Supplied in plastic racks. code

type of coagulant

601402

spray

601403

spray

601412

spray

601413

spray

description 13 x 75 round for 4 ml blood 13 x 75 round for 2.5 ml blood 15 x 50 flat for 4 ml blood 15 x 50 flat for 2.5 ml blood

case quantity

case weight

case volume

12 x 100

4.30

0.033

12 x 100

4.30

0.033

10 x 120

4.80

0.033

10 x 120

4.80

0.033

Pallet quantity code 601402 and 601403: 48 cases. Pallet quantity code 601412 and 601413: 40 cases.

c (IVD)

Citrate for coagulation

Made of clear polypropylene, supplied capped and labeled. Our sodium citrate, 3.8 % or 3.2 % concentration, buffered and sterile has a ratio citrate: blood 1:9 and is highly recommended for coagulation tests. According to the prevailing rules, this liquid anticoagulant permits TODETERMINETHEPROTHROMBINTIME1UICK up to 12 hours after sample collection. The cap is not only easy-to-use but also assures a watertight closing; allowing a comfortable and reliable capping. A volume indication mark, lot number and expiry date on the label of each tube, allows to assure the traceability of the product. Tubes are supplied in plastic racks. code

601102 601103 601203

type of coagulant

description

buffered to 3.8 % buffered to 3.8 % buffered to 3.2 %

13 x 75 round for 4 ml blood 13 x 75 round for 2.5 ml blood 13 x 75 round for 2.5 ml blood

Pallet quantity: 48 cases.

case quantity

case weight

case volume

12 x 100

5.30

0.033

12 x 100

5.30

0.033

12 x 100

5.30

0.033


3. HAEMATOLOGY AND BIOCHEMISTRY

c (IVD)

E.S.R. citrate tube

Capped and labeled transparent polypropylene tubes. Filled with 3.8% sodium citrate (anticoagulant). The citrate: blood ratio (according to the Westergren method) is 1:4, so the tubes contain 0.4 ml of stable 3.8 % sodium citrate solution. The printed ďŹ ll line indicates 2.0 ml so 1.6 ml of blood will be added. The cap design results in a comfortable and reliable handling, specially because it is possible working with gloves without slipping. Volume ďŹ ll line, expiry date and batch number are printed on the label; so the product traceability is guaranteed. Supplied in 100 units plastic racks. code

description

case quantity

case weight

case volume

601006

round tube 13 x 75 mm for 2 ml (1.6 ml of blood)

12 x 100

5.30

0.033

Pallet quantity: 48 cases.

Mailing container Mailing container with safety screw blue cap, both manufactured in polypropylene autoclavable. Leak proof. Dimensions uncapped 128 x 30 mm. Ideal for 10 ml tubes. The tube includes a piece of absorbent paper to prevent any leakage. Container and cap are sold separately. code

description

401301

mailing container

401302

screw cap

case quantity

case weight

case volume

500

7.70

0.08

500

2.00

0.03

Blood group test plate Made of ultra clear polystyrene. Features 10 numbered wells. Stackable. Dimensions: 160 x 40 x 6 mm. Each case contains 50 bags of 10 units each. code

description

case quantity

case weight

case volume

128030

blood group plate

50 x 10

7.20

0.029

73


74

3. HAEMATOLOGY AND BIOCHEMISTRY Closed E.S.R. system (micro system)

c (IVD)

Pipette graduated from 0 to 160 mm, with a total length of 200 mm and an inner diameter of 2.5 mm, according to the Westergren Method. The system accepts a total volume of 1 ml. The plunger must be drawn up manually up to a limit inside the pipette to ensure an adequate volume of blood-citrate blend. Two tubes available, both made of high transparency polypropylene: Code 1164: for 1 ml of total volume (0.75 ml of blood); with a pierceable rubber cap that allows inserting the pipette without taking off the cap. Code 601006: for 2 ml of total volume (1.6 ml of blood); with a polyethylene cap that shall be taken off before inserting the pipette.

code

description

case quantity

case weight

case volume

1360

graduated pipette

2 x 500

3.35

0.008

stand for 10 pipettes

5

3.20

0.023

tube 13 x 75 mm with sterile citrate for 2 ml (1.6 ml of blood) tube 12 x 55 mm with citrate with pierceable cap

12 x 100

5.30

0.033

10 x 100

2.50

0.024

1361* 601006 1164

* Non c product

c (IVD)

E.S.R. with self-levelling system

Consists of a polystyrene pipette with self-ďŹ lling system using a plunger suitable for 12 mm or 13 mm Ă&#x2DC; tubes. Graduated from 0 to 180 mm. 1.25 ml blood-citrate mixture is enough for determination. Westergren method.

description

code

29 29/1* 601006

E.S.R. pipette, 230 mm long graduated up to 180 mm methacrylate holder for 12 tubes 13 x 75 tube 13 x 75 mm with sterile citrate for 2 ml (1.6 ml of blood)

* Non c product

case quantity

case weight

case volume

3 x 200

3.00

0.028

1

0.18

0.0002

12 x 100

5.30

0.033


3. HAEMATOLOGY AND BIOCHEMISTRY E.S.R. system,

c (IVD)

The ESR system consists of a holder, a suction pump, a suction adapter and a set of pipettes with a polyethylene filter (suction tube not included). The holder accommodates up to 10 pipettes. Plastic pipettes are graduated up to 180 mm. Tubes are filled with sterile citrate (0.106 M). Westergren method. code

description

case quantity

case weight

case volume

28

pipette graduated up to 180 mm, length 230 mm

600

3.05

0.010

1361*

holder to 10 places

5

3.20

0.023

601006

tube 13 x 75 mm with sterile citrate for 2 ml (1.6 ml of blood)

12 x 100

5.30

0.033

* Non c product

Comparation of the ESR reading obtained with the Micro system and standard type ESR reading with MICRO system (mm)

Micro system reading at 50 minutes and with standard at 60 minutes. Micro system reading at 100 minutes and with standard at 120 minutes.

Sedirate micro system

c (IVD)

System for the determination of the erythrocyte sedimentation rate. Specially recommended for Paediatrics. The system consists of a tube and a pipette. The tube includes a pierceable and resealable stopper (same model as the stoppers presented on all our tubes on next page) filled with 0.08 ml of trisodic citrate 0.106 M for 0.32 ml of blood according to standards of Westergren standard method.The pipette of pressure filling has an inner diameter of 1.25 mm and is graduated. Once blood and citrate are mixed together, introduce the pipette into the tube (without removing the stopper). The blood will automatically reach the 0 level. The results obtained are comparable to those obtained with the standard method (macro). We recommend to use this system with the holder code 29/1 presented on the previous page. code

description

case quantity

case weight

case volume

27

set pipette + tube

400

3.80

0.032

75


76

3. HAEMATOLOGY AND BIOCHEMISTRY

Blood collection tubes with pierceable and re-sealable rubber caps Manufactured from transparent polypropylene. Robust and resistant to breakage. Tubes feature a unique ďŹ&#x201A;exible rubber cap which has two cross cuts and is specially designed to reseal automatically after introduction or withdrawal of the sample. This system eliminates the need to remove the stopper when introducing or withdrawing blood samples. Tubes can be used with most manual, semi-automatic and automatic blood sampling machines, and are suitable for transportation by intra hospital pneumatic systems.

c (IVD)

Blood collection tubes code

620800 620300 620400 621611 621613 621102

expiration case months quantity

case weight

case volume

6 x 100

4.10

0.036

36

6 x 100

4.10

0.036

36

8 x 100

3.00

0.031

24

10 x 100

4.00

0.037

24

8 x 100

3.00

0.031

15

8 x 100

3.00

0.031

type

description

serum separator serum separator serum separator edta tripotassium edta tripotassium citrate for coagulation

16 x 100 with gel for 10 ml 16 x 100 with granules for 10 ml 13 x 80 with granules for 4 ml 16 x 55 skirted for 2.0 ml

15

13 x 80 for 2.5 ml 12 x 70 for 2 ml

Pallet quantity: 50 cases.

c (IVD)

Special pediatrics code

620200 621610 621101

type

description

serum 12 x 55 with granules separator for 2 ml edta 12 x 55 for 1 ml tripotassium citrate for 12 x 55 for 1 ml coagulation

expiration case months quantity

case weight

case volume

36

10 x 100

3.10

0.025

18

10 x 100

2.75

0.025

15

10 x 100

2.80

0.025

Pallet quantity: 50 cases.

See speed sedimentation citrate for pediatrics in the previous page.


3. HAEMATOLOGY AND BIOCHEMISTRY

CENTRIFUGATION GUIDELINES FOR EUROTUBO® TUBES PROBLEM

Poor or incomplete serum separation. Barrier is intact and well defined. The barrier is not clearly defined.

Barrier is skewed and poorly formed, separation is incomplete.

Blood tubes fracture during centrifugation.

Cell clumps observed within the separation barrier.

Presence of fibrin in serum.

POSSIBLE CAUSES

REASON FOR MISUSE

SOLUTION

Incomplete or inhibited coagulation. Nonhomogeneous blend of blood and coagulant.

The tube was not inverted for five times.

After tube is filled with blood and capped, gently invert the tube for 5 times.

Early centrifugation, insufficie nt allowance coagulation time prior to centrifugation.

The recommended 30 min. standing time for coagulation was not observed.

Wait for 30 min before centrifugation.

Centrifugation g-setting under appropriate value.

The tube was not centrifuged at or above the minimum, appropriate g-setting.

Less centrifugation time than recommended.

The tube was not centrifuged for the required time.

Refrigerated centrifuge.

a) Set the centrifuge between 1,000-1,500 g. b) Confirm centrifuge is correctly calibrated. Centrifuge the tube at the appropriate g-force for at least 10 min.

a) Keep the centrifuge at a temperature between 24 The temperature of the and 26ºC (around 77 F). centrifuge was lower than the b) Thermally insulate the tube recommended and avoid contact with the centrifuge and centrifuge rotor.

G-force centrifugation exceeded the tube construction.

The tube was subjected to g-forces exceeding 1,500 g

Maintain centrifuge at or below 1,500 g.

Centrifuge not positioned level and/or foreign matter or debris inside the rotor of the centrifuge.

a) Shock absorbers or tube stand-off cushions absent. b) The inside of the rotor is not clean.

Install shock absorbers or tube stand-off cushions as required. Remove any foreign agent or debris that may be inside the centrifuge.

Incomplete or inhibited coagulation. Nonhomogeneous blend of blood and coagulant.

The tube was not inverted for five times.

Invert the tube for five times.

Insufficient time before centrifugation

The recommended 30 min standing time for coagulation was not observed.

Wait for 30 minutes before centrifugation.

Excessive g-force centrifugation.

The tube was centrifuged at above 1,500 g.

Set the centrifuge at a speed below 1,500 g.

Incomplete or inhibited coagulation. Nonhomogeneous blend of blood and coagulant.

The tube was not inverted for five times.

Invert the tube for five times.

Early centrifugation, insufficient allowance coagulation time prior to centrifugation.

The recommended 30 min standing time for coagulation was not observed.

Wait for 30 minutes before centrifugation.

Poor serum quality due to haemolysis.

Blood subject to aggressive agitation or rough handling.

Handle tube with moderation. Invert gently. Never shake severely or agitate the tube.

Excessive g-force centrifugation.

The tube was centrifuged above 1,500 g.

Set the centrifuge to a maximum of 1,500 g g-force.

Abnormal assay results.

77


78

3. HAEMATOLOGY AND BIOCHEMISTRY Anticoagulants and preservatives in containers Available in bottles of 15 ml. The dosage of 1 drop (15 ml = 300 drops) is enough for 5 ml of blood. Both products have preservatives for stability.

code

description

case quantity

705000

lithium heparin 15 ml

10

705010

tripotassium edta 15 ml

10

Special techniques Liquid for thrombocyte count determination: Due to its optical characteristics it identiďŹ es the thrombocyte avoiding confusion with other cells. This reagent also prevents adhesion and aggregation of the thrombocytes. Full instructions are included with the kit. Test of osmotic brittleness of the erythrocytes: The test for the erythrocyte osmotic fragility detects the resistance of these cells to haemolysis, in hypotonical solutions with decreasing concentration of sodium chloride. This set contains 2 complete tests and each one is composed of 12 tubes with stable and buffered solutions. Full instructions are included in the kit.

code

description

case quantity

case weight

case volume

800000

thrombocyte counting kit 1 x 50 tubes

30 kits

5.50

0.046

802000

osmotic brittleness of erythrocytes kit 2 x 12 plus 2 lithium heparine tubes

30 kits

7.50

0.046

Minimum order quantity: 1 kit.

c (IVD)

Reticulocyte staining kit

This simple to use kit consists of a tube containing 100 Îźl of stable buffered bright cresil blue stain which allows the determination of the erythrocyte count. Two to three drops of blood are added directly to the tube and incubated for 10 minutes at room temperature. The erythrocytes become a pale blue colour making them easy to identify. Full instructions are included with the kit. Tube made of polypropylene and cap of mauve polyethylene. code

description

case quantity

case weight

case volume

801000

reticulocyte count kit (1 x 50 tubes)

30 kits

5.50

0.046

Minimum order quantity: 1 kit.


3. HAEMATOLOGY AND BIOCHEMISTRY c (IVD)

Haematological stains

Please see more information about these stains at Chapter 5. Microscopy and Staining, along with information about our Stains for Microbiology. code

808000

808001

808100

808101

808200

805013

case case case quantity weight volume

description Eosin, solution, May Grunwald, 250 ml bottle Danger symbols: R11-23/24/2539/23/24/25. S 7-16-36/37-45 Eosin, solution, May Grunwald, 1000 ml bottle Danger symbols: R11-23/24/2539/23/24/25. S 7-16-36/37-45 Eosin, solution modified Giemsa, 250 ml bottle Danger symbols: R11-23/24/2539/23/24/25. S 7-16-36/37-45 Eosin, solution modified Giemsa,1000 ml bottle Danger symbols: R11-23/24/2539/23/24/25. S 7-16-36/37-45 Eosin, solution Wright, 250 ml bottle Danger symbols: R11-23/24/2539/23/24/25. S 7-16-36/37-45 fast stain for blood extensions, 250 ml containers, 2 containers A, 2 containers stain B

16

6.00

0.046

12

13.00

0.046

16

6.00

0.046

12

13.00

0.046

16

6.00

0.046

12

20.00

0.046

c (IVD)

Microhaematocrit capillary tubes

Soda neutral glass tubes with a colour-coded print for an easier identification, with heparin (red) or without heparin (blue). Supplied inside a glass tube with a plastic cap, specifying code, lot and expiry date. Two lengths available: 70 or 75 mm. Internal diameter: 1.15 mm, external diameter: 1.55 mm. They meet ISO 12772. code

description

case quantity

case weight

case volume

7301

75 mm with heparin

10 x 100

0.36

0.001

7311

75 mm without heparin

10 x 100

0.36

0.001

7401

70 mm with heparin

10 x 100

0.36

0.001

7411

70 mm without heparin

10 x 100

0.36

0.001

Capillary tubes sealing wax Vinyl plastic wax, in a numbered (from 1 to 24) plastic holder. Suitable for all capillary tubes, specially for those that have to be centrifuged, like microhaematocrit capillary tubes. Must be preserved in temperatures from 8 ºC to 30 ºC.

code

description

case quantity

case weight

case volume

7600

sealing wax

3

0.050

0.001

79


80

3. HAEMATOLOGY AND BIOCHEMISTRY

Please see our plain, glass tubes on Chapter 7. Tubes and Microtubes Soda or borosilicate glass. Round bottom.

Nine different volumes, from 4 to 47 ml. Also available screw cap tubes.

Please see our plain, plastic tubes on Chapter 7. Tubes and Microtubes Polystyrene or polypropylene tubes. Different bottoms available: s2OUND s#ONICAL s7ITHSPECIALBASEFORSEDIMENTATION

Graduated and non graduated. Volumes from 3 to 17 ml. Fourteen different caps depending on the tube and the application. Capped and labeled versions are available.

Please see our racks on Chapter 10. Sample storage and Cryogenics Folding racks manufactured in polypropylene. Polypropylene racks for freezing.

Z racks in aluminum or stainless steel. Racks in stainless steel mesh.


3. HAEMATOLOGY AND BIOCHEMISTRY Spectrophotometer cuvettes Disposable cuvettes suitable for most of the open spectrophotometers. Homogeneous measures, specially of the surface crossed by the light beam, assuring an optimum transmission level on the whole visible spectral. The material used avoids any possible measurement interference. Due to the strict quality control during the manufacture process, a high reliability is assured. The maximum absorption variations are +/- 1 %. Light beam width: for 10 mm. The two sides not crossed by the light beam are ribbed to an easy identiďŹ cation of the cuvette position inside the spectrophotometer measurement chamber, resulting in an easy positioning and removal.

1

2

3

They are supplied in a dust proof, expandable polystyrene box (100 units per box) with lid. Standard cuvettes Made of polystyrene for assays in the visible spectral range (340 to 750). code

description

case quantity

case weight

case volume

1

302000

4.5 ml macro

5 x 100

1.60

0.018

2

302100

1.5 ml micro

5 x 100

1.60

0.018

3

302400

2.5 ml semimicro

5 x 100

1.60

0.018

New

3

4

Special UV grade cuvettes Made of UV grade PMMA for accuracy throughout UV/Vis range (280 to 800). Model 303100 with four clear sides is ideal for ďŹ&#x201A;uorometry and nephefelometry. code

description

case quantity

case weight

case volume

3

303100

4.5 ml four sides transparent

5 x 100

1.60

0.018

4

303101

2.5 ml semimicro

5 x 100

1.60

0.018

5

303102

4.5 ml macro

5 x 100

1.60

0.018

6

303103

1.5 ml micro

5 x 100

1.60

0.018 New

NEW

Cap In polyethylene. Suitable for the macro cuvettes, 4.5ml (302000, 303100, and 303102) code

7

304000

description

case quantity

case weight

polyethylene cap

1,000

1.05

case volume

0.018 New

Please see our rack for the spectrophotometer cuvettes, code M-100, on Chapter 10. Sample Storage and Cryogenics. - Polypropylene - Autoclavable - Assembling rack that saves space - Capability: 42 cuvettes

7

5

6

81


82

3. HAEMATOLOGY AND BIOCHEMISTRY

1

2

3

4

5

6

7

Sample cups Polystyrene cups, with polyethylene caps. mod.

code

description

type

Ø ext. mm

h mm

case quantity

case weight

case volume

1

900024

0.50 ml

Gemsaec, Kone Lab 20

13.55

24.50

10 x 1,000

12.70

0.069

2

900023

0.25 ml

Centrifichem

13.70

16.40

14 x 1,000

15.00

0.069

3

900022

1.50 ml

Technicon

13.80

22.60

10 x 1,000

10.60

0.069

4

192503

1.50 ml

Technicon RA 1000

13.90

24.70

12 x 1,000

6.00

0.071

2.00 ml

Technicon

13.75

24.90

10 x 1,000

10.00

0.080

push on cap suitable, for all models anti-evaporation cap, pierceable, for models 1 and 2

16.00

8.50

20 x 1,000

3.50

0.069

15.70

5.90

10 x 1,000

3.20

0.024

5

910022

6

900026

7

911026

Cobas Mira cuvette segments Multicuvettes made of PMMA. Rack made of polypropylene (colour: red). For use on Cobas Mira. Light path: 6 mm. Complete rack with 15 segments of 12 cuvettes. code

description

case quantity

case weight

case volume

900019

complete rack: 15 segments of 12 cuvettes

30

9.00

0.040

Coulter counter cups Coulter counter cups: single use polystyrene cups suitable for any Coulter counter for cell counting. Two models available, with or without lid. Volume: 20 ml. Dimensions: 30 x 56 mm (Ø x h). code

description

case quantity

case weight

case volume

200103

coulter counter cup with lid

1,000

7.80

0.087

1,400

8.70

0.120

200102 coulter counter cup without lid


3. HAEMATOLOGY AND BIOCHEMISTRY

1*

2

3

4

5

Sample cups Cups are made of polystyrene, except code 900008 which is made of HDPE. mod.

code

description

type

Ø ext. mm

h mm

case quantity

1*

900005.1

1.5 ml, cup with steel

Amelung

2

900020

2.50 ml

Hitachi

case weight

case volume

18.65 / 11.25

22.8

12 x 1,000

9.40

0.092

16.75

38.0

6 x 1,000

10.75

0.069

3

900008

0.70 ml

Cobas bio

7.65

35.5

12 x 1,000

8.35

0.067

4

910023

4.00 ml

Technicon

16

37.9

6 x 1,000

12.20

0.069

5

910026

0.5 ml (0.8 ml total volume)

Sysmex

9.95 / 7.94

29.8

10 x 2,000

12.5

0.056

* 12 bags of 1,000 sample cups and 12 dispenser containers of 1,000 balls.

Scintillation vials Single use vials made of high density polyethylene to minimize solvent losses. Screw caps ensure a leakproof seal. Compatible with most liquid scintillation counters available on the market. 2 models available: code 900100, standard volume 20 ml, and code 900101, volume 4 ml, designed for insertion in the 20 ml vial so as to minimize the volume of scintillation liquid. Dimensions: Vial 20 ml: 26.5 x 58.5 mm (Ø x h) Minivial 4 ml: 13.71 x 53.15 mm (Ø x h). code

description

case quantity

case weight

case volume

900100

scintillation vial (20 ml)

1,000

7.90

0.069

900101

minivial (4 ml) for the above vial

2,000

5.90

0.042

Beakers for cell counters Single use beakers ideal for dilutions and cell counting in Toa and Royco-Hycel cell counters. Both models are made of polyethylene.

code

baker type

1988314

Toa

1988315 Royco-Hycel

Ø mouth Ø base h mm mm mm

vol. ml.

case case case quantity weight volume

30,5

25

68,6 30 ml

3,000

6.54

0.039

30.5

26

57,5 25 ml

3,000

6.50

0.039

83


84

4. HISTOLOGY


4. HISTOLOGY

85


86

4. HISTOLOGY Polyethylene wide mouth jars with lid and insert plug High density Polyethylene jars with screw cap and insert plug. Jars and plugs are natural transluscent; lids are black. Upon request, jars can be supplied individually wrapped for a minimum order of 3 cases for each code, and sterile for a minimum order of 6 cases, for each code.

code

capacity ml

Ø neck mm

Ø base mm

heigth mm

case quantity

case weight

case volume

202811

30

25

32

53

100

1.00

0.011

202810

60

38

52

48

200

4.00

0.049

202808

90

51

60

51

150

3.80

0.049

202809

125

51

60

62

200

5.00

0.087

202801

170

51

60

80

160

4.70

0.087

202802

250

54

67

100

125

4.70

0.087

202814

400

60

74

124

130

9.00

0.140

202803

500

67

80

131

120

8.40

0.140

202821

500

86

103

93

95

9.00

0.140

202813

750

86

103

127

75

7.70

0.140

202818

1,000

86

103

157

50

5.80

0.140

See more capacities on pages 258-259.

Jars with lid Body and lid in white autoclavable polypropylene. Self sealing security lid. Suitable for alimentary use. 1,560 ml jar embodies a plastic handle. Jars are supplied uncapped. Cases per pallet: 24, excepting code 241010, palletized in 40 cases. code

nominal Ø int. mouth x weight capacity ml Ø base x height mm g

case quantity

case weight

case volume

241010

250

84.5 x 79.5 x 62

18

150

3.00

0.046

241011

550

107 x 98 x 80

32

250

5.00

0.082

241012

825

111.5 x 112 x 101.5

38

180

3.20

0.082

241013

1,000

112.5 x 112 x 137.5

46

150

4.20

0.082

241014

1,560

133.5 x 134 x 140

58

150

4.40

0.082

Tamper evident, buckets with lid Disposable containers made of autoclavable polypropylene. Suitable for alimentary use. Include tight fitting and leakproof lids. All models, include a sturdy and convenient white plastic handle for easier carrying. Buckets are supplied with lid apart. code

capacity Ø int. ml mouth mm

height mm

body weight g

case quantity

case weight

case volume

222802

2,500

184.00

137.50

105.00

80

9.00

0.140

222803

4,400

210.00

156.00

134.00

48

9.50

0.140

222804

5,600

211.00

194.00

152.00

45

10.00

0.140

222805

10,700

251.00

263.00

314.00

20

10.50

0.140


4. HISTOLOGY

3 1

2

c (IVD)

EUROTUBOÂŽ Leak proof screw cap containers

Specially designed for histology, they are provided with double internal security closure. Manufactured in translucent polypropylene with polyethylene ribbed yellow cap. They have moulded graduations in increments of 50 ml, and a ring in the upper part of the container that prevents dripping when decanting liquids. Its leakproof closure makes them ideal for liquid (including alcohols) or solid sample storage. They meet the standard UNE-EN 14401:2005 Rigid plastic containers. Methods to test the effectiveness of closures. Supplied uncapped. Other cap colours available upon request. mod.

code

capacity ml

external mouth Ă&#x2DC; mm

height mm

case quantity

case weight

case volume

1

202845

250

89

57

100

5

0.046

2

202846

500

90

110

200

11.5

0.082

3

202847

1,000

111

139

100

11.4

0.096

Ask for our special containers with Formaldehyde

Security screw cap containers

c (IVD)

Ultra clear polypropylene containers with yellow polyethylene cap. Watertight closure: the cap, with an innovative shape, has a double closure. Graduated Container. The base and the cap are ribbed so the handling with gloves is comfortable and reliable. There is a ring in the upper part of the body, in order to avoid the dripping in case of liquid decanting. Six different capacities from 20 to 120 ml.

Find more information about this product on Chapter 8. Containers

cap and container shown after sealing

secondary seal

primary seal

87


88

4. HISTOLOGY c (IVD)

Paraplast Plus® Paraffin

It has a low dimethylsulphoxyde content and a quick penetration of tissues for 2 micron cuts. Melting point: 56/58 ºC. Can be used with usual solvents. Ideal for histology.

code

description

case quantity

case weight

case volume

440139

bag of 1 kg

8 bags

9.0

0.026

Histology mould 2 1

5 4

3

Single use clear polypropylene mould. Can be re-used. The smooth interior ensures the paraffin does not adhere to the mould. The special material used ensures excellent thermal exchange. Available in various sizes. External dimensions: 50 x 37.2 x 12 mm. Suitable for the most of cassettes. well dimensions mm

case quantity

case weight

case volume

440130

7x7x5

1,000

2.20

0.10

440131

15 x 15 x 5

1,000

2.20

0.10

3

440132

24 x 24 x 5

1,000

2.20

0.10

NEW 4 5 NEW

440133

30 x 24 x 5

1,000

2.20

0.10

440134

37 x 24 x 5

1,000

2.20

0.10

mod.

code

1 2

Metal tray histology

NEW

Material: stainless steel. External dimensions: 52 x 35 x 11 mm.

code

well dimensions mm

bag quantity

bag weight

bag volume

192931

7x7x9

10

0.20

0.001

192932

15 x 15 x 6

10

0.20

0.001

192933

24 x 24 x 6

10

0.20

0.001

192934

30 x 24 x 6

10

0.20

0.001

192935

37 x 24 x 6

10

0.20

0.001

Tissue embedding sponge Foam sponge, very useful for small specimens in biopsy tests. Fits standard cassettes. Avoids sample loss though drain holes when sample is processed. Does not affect paraffin drainage.

code

dimensions mm

colour

case quantity

case weight

case volume

192922.04

31 x 25 x 3

blue

500

0.250

0.015


4. HISTOLOGY Forceps Made of P.O.M. Colour: orange. Self-sprung forceps with rounded ends. Code 19503, the inner part of the tip is ribbed to enhance sampling. Ribbed for a better handling. Autoclavable. Flexible. code

length mm

case quantity

case weight

case volume

19500

115

5

0.02

0.0010

19501

145

5

0.06

0.0010

19503

250

5

0.08

0.0010

Cassettes without lid Made of polyacetyle. With 34 round holes of 2 mm Ă&#x2DC;. Resistant to the solvents used in histological processes. It is possible to write on them. External dimensions: 40 x 28 x 6 mm. colour

case quantity

case weight

case volume

440141

white

3 x 1,000

7.00

0.040

440147

green

3 x 1,000

7.00

0.040

440144

pink

3 x 1,000

7.00

0.040

440146

red

3 x 1,000

7.00

0.040

440143

yellow

3 x 1,000

7.00

0.040

code

Lids for cassettes Stainless steel lids. Fit all standard cassettes. Suitable for 440141 and series. code

description

case quantity

case weight

case volume

440149

lid for cassettes

25

0.10

0.0001

Cassette for biopsy 6 compartments Material: polyacetyle. Designed for small biopsies, each cassette has six individual cells to hold six samples. Each cell is 7 x 12 mm. The lid allows multiple opening and closing. A frosted area allows writing on the cassette. Each cassette has near 3,000 micro holes of 0.26 mm diameter. colour

case quantity

case weight

case volume

44240

pink

4 x 250

5.20

0.026

44241

white

4 x 250

5.20

0.026

44245

blue

4 x 250

5.20

0.026

code

Ask for minimum quantity and delivery time of other colours.

89


90

4. HISTOLOGY CASSETTES HISTOSETTE I -

Made of polyacetal. Air vents allowing more efficient filling with paraffin. Safety closure. External dimensions: 40 x 28 x 6 mm (with closed lid)

- With one-piece integral lid. - To lock the cassette, just snap apart the lid, turn it round and lock it into the base of the cassette. - They may be opened and closed as many times as required.

HOW TO USE

Cassettes pour tissus. Histosette I NEW

45º

Writing area at 30º or 45º angle, depending on the code. 64 cuts (1 x 5 mm) in base and lid, distributed 16 x 4. case quantity

case weight

case volume

code 30º

code 45º

colour

454141

white

3 x 500

5.40

0.040

green

3 x 500

5.40

0.040

454140

NEW 454111 NEW 454117 NEW 454110

pink

3 x 500

5.40

0.040

454143

NEW 454113

yellow

3 x 500

5.40

0.040

454147

blue 3 x 500 5.40 0.040 NEW 454118 Ask for minimum quantity and delivery time for other colours. 454148

30º

NEW

Cassettes for biopsy. Histosette I Writing area at 45º angle. 224 draining holes (1 x 1 mm). code

colour

case quantity

case weight

case volume

554111

white

3 x 500

5.40

0.040

554117

green

3 x 500

5.40

0.040

554110

pink

3 x 500

5.40

0.040

554113

yellow

3 x 500

5.40

0.040

Ask for minimum quantity and delivery time for other colours.

Cassettes for tissue Made of acetal polymer. With an integral lid. Small tab on the lid for easy opening and locking. code

colour

case quantity

case weight

case volume

554141

white

4 x 500

7.58

0.060

554147

green

4 x 500

7.58

0.060

554140

pink

4 x 500

7.58

0.060

554143

yellow

4 x 500

7.58

0.060

554148

blue

4 x 500

7.58

0.060


4. HISTOLOGY CASSETTES HISTOSETTE II - Made of polyacetal. - Hinged lid: can be opened and closed as often as necessary. - Supplied assembled, saving time and making storage easier. - External dimensions: 41 x 28 x 6 mm.

- Air vents allowing more efficient filling with paraffin. - Easy handling with one hand. - Safety closure (see figure). - Writing area slanted at a 45º angle, suitable to be used with most labelling instruments.

HOW TO USE

Cassettes for tissue. Histosette II Material: acetal polymer. 64 cuts in base and lid. Cassettes and lids are available: pre-mounted, or with the lid separated in another case. code

colour

case quantity

case weight

case volume

Cassettes with the lid pre-mounted: 44140

pink

3 x 500

5.00

0.026

44141

white

3 x 500

5.00

0.026

44143

yellow

3 x 500

5.00

0.026

44145

blue

3 x 500

5.00

0.026

44147

green

3 x 500

5.00

0.026

Cassettes with the lid separated: 441140

pink

2 x 500*

3.50

0.026 NEW

441141

white

2 x 500*

3.50

0.026 NEW

441143

yellow

2 x 500*

3.50

0.026 NEW

441145

blue

2 x 500*

3.50

0.026 NEW

441147

green

2 x 500*

3.50

0.026 NEW

NEW

* Two dispensing boxes with 500 cassettes each plus one box containing 1,000 lids.

Cassettes for biopsy. Histosette II Made of acetal polymer. 224 holes. 1 mm square openings to maximize fluid exchange and to ensure proper drainage. Cassettes and lids are available: pre-mounted, or with the lid separated in another case. code

colour

case quantity

case weight

case volume

Cassettes with the lid pre-mounted: 445140

pink

3 x 500

5.20

0.026

445141

white

3 x 500

5.20

0.026

445143

yellow

3 x 500

5.20

0.026

445145

blue

3 x 500

5.20

0.026

445147

green

3 x 500

5.20

0.026

Cassettes with the lid separated: 451240

pink

2 x 500*

3.90

0.026 NEW

451241

white

2 x 500*

3.90

0.026 NEW

451243

yellow

2 x 500*

3.90

0.026 NEW

451245

blue

2 x 500*

3.90

0.026 NEW

451247

green

2 x 500*

3.90

0.026 NEW

* Two dispensing boxes with 500 cassettes each plus one box containing 1,000 lids.

NEW

security closure

91


92

4. HISTOLOGY CASSETTES SLIMSETTE - Made of polyacetal. - Hinged lid: can be opened and closed as often as necessary. - Supplied assembled, saving time and making storage easier. - Hinged lid may be separated if required. - Dimensions: 41 x 28.5 x 6 mm.

-

Easy handling with one hand. Safety closure. Air vents allowing more efficient filling with paraffin. Writing area slanted at a 45º angle, suitable with most labeling instruments.

- Only 6 mm high, allowing more cassettes to be stacked in automated labeling machines and in storage cabinets. - Three versions available: single cassettes; in sleeves for automatic labeling instruments; in stacks for Leica® and Sakura® labeling instruments

Cassettes for tissue. Slimsette Quick drainage thanks to 114 vents each measuring 5 x 1 mm. code

colour

case quantity

case weight

case volume

SINGLE CASSETTES (The main case contains three dispenser boxes of 500 cassettes each)

555140

pink

3 x 500

5.01

0.025

555141

white

3 x 500

5.01

0.025

555143

yellow

3 x 500

5.01

0.025

555147

green

3 x 500

5.01

0.025

555148

blue

3 x 500

5.01

0.025

SLEEVES (each case contains 10 sleeves of 75 cassettes)

555150

pink

10 x 75

3.29

0.015

555151

white

10 x 75

3.29

0.015

555153

yellow

10 x 75

3.29

0.015

555157

green

10 x 75

3.29

0.015

555158

blue

10 x 75

3.29

0.015

STACKS FOR LEICA® AND SAKURA® (each case contains 50 stacks of 40 cassettes)

555250

pink

50 x 40

6.84

0.022

555251

white

50 x 40

6.84

0.022

555253

yellow

50 x 40

6.84

0.022

555257

green

50 x 40

6.84

0.022

555258

blue

50 x 40

6.84

0.022

Ask for minimum quantity and delivery time for other colours.

Cassettes for biopsy. Slimsette Quick drainage thanks to its 224 vents (0.8 x 0.8 mm). code

colour

case quantity

case weight

case volume

SINGLE CASSETTES (The main case contains three dispenser boxes of 500 cassettes each)

44150

pink

3 x 500

5.01

0.025

44151

white

3 x 500

5.01

0.025

44153

yellow

3 x 500

5.01

0.025

44155

blue

3 x 500

5.01

0.025

44157

green

3 x 500

5.01

0.025

0.015

SLEEVES FOR THERMO SCIENTIFIC SHANDON® (Each case contains 10 sleeves of 75 cassettes)

44250

pink

10 x 75

3.29

44251

white

10 x 75

3.29

0.015

44253

yellow

10 x 75

3.29

0.015

44255

blue

10 x 75

3.29

0.015

44257

green

10 x 75

3.29

0.015

0.022

STACKS FOR LEICA® AND SAKURA® (ach case contains 50 stacks of 40 cassettes)

44350

pink

50 x 40

6.84

44351

white

50 x 40

6.84

0.022

44353

yellow

50 x 40

6.84

0.022

44355

blue

50 x 40

6.84

0.022

44357

green

50 x 40

6.84

0.022

Ask for minimum quantity and delivery time for other colours.


4. HISTOLOGY CASSETTES SWINGSETTE - Made of polyacetal. - Cassettes type Richard-Allan® and Surgipath® MultiCassette (Leica) - Hinged lid: can be opened and closed as often as necessary. - Supplied assembled, saving time and making storage easier. - Dimensions: 42 x 28 x 6 mm.

-

Large tab for convenient an easy opening Easy handling with one hand. Safety closure. Writing area at 45°, suitable for most automatic labelers. Air vents allowing more efficient filling with paraffin.

Cassettes for tissues. Swingsette

NEW

Designed to hold tissue specimens. 64 holes of approximately 0.76 x 5.06 mm; distributed 16 x 4. code

colour

case quantity

case weight

case volume

415141

white

3 x 500

5.44

0.025

415143

yellow

3 x 500

5.44

0.025

415147

green

3 x 500

5.44

0.025

Ask for minimum quantity and delivery time for other colours.

Cassettes for biopsy. Swingsette

NEW

Designed to hold biopsy specimens. 224 holes of approximately 0.76 x 0.76 mm. code

colour

case quantity

case weight

case volume

414141

white

3 x 500

5.44

0.025

414143

yellow

3 x 500

5.44

0.025

414147

green

3 x 500

5.44

0.025

Ask for minimum quantity and delivery time for other colours.

Mega cassettes Made from polyacetal. With an integral lid. Designed for larger tissue samples. Holes are 1 x 5 mm. Cassette dimensions: 26 x 40 x 13 mm. code

colour

case quantity

case weight

case volume

44125

white

500

2.57

0.025

Ask for minimum quantity and delivery time for other colours.

93


94

4. HISTOLOGY Storage cabinet Made of ABS. Marble color. This storage cabinet with lid includes 5 drawers and is designed for the storage of small units such as slides or embedding rings. Drawers are designed to hold ABS racks code 19921. The storage cabinet can hold a total of 5,000 slides, as each drawer can hold 10 racks and each rack can hold 100 slides. Each slot on the rack is numbered. Polystyrene covers for the racks are available (code 19920). A four wheel support (code 19931) is also available for the cabinet.

730

420 420

code

description

case quantity

case weight

case volume

19930

420 x 420 x 730 mm

1

8.10

0.14

19931

4 wheels

1x4

0.90

0.0009

19921

cabinet rack

2

0.40

0.001

19920

cover

2

0.14

0.001

Please ďŹ nd our range of slides and products for staining in Chapter 5. Microscopy and Staining.

Economical storage box This box, complete with a lid, is specially designed for the storage of histology cassettes. Made of heavy-duty cardboard for long term storage. Each box stores up to 250 cassettes or 160 embedding rings. Dimensions: 455 x 235 x 50 mm. code

description

case quantity

case weight

case volume

DS 42

waterproof cardboard

18

5.3

0.132

Modular storage drawers Made of high impact polystyrene, this set consists of 6 stackable drawers (7 slots per drawer) providing permanent storage and identiďŹ cation of up to 165 embedding rings or 250 cassettes per drawer. (total capacity: 1,500 cassettes). Dimensions: 400 x 230 x 340 mm. Front: black colour. Sides: grey.

code

description

case quantity

case weight

case volume

DS 40

set of 6 drawers

1

5.90

0.030


4. HISTOLOGY Laboratory storage cabinet Designed especially for the storage of microscope slides, photo slides, histology cassettes and embedding rings. Universal models interchangeable with other cabinets on the market. All parts of the cabinet are stackable. Manufactured from enameled metal. Colour grey. You can make up your own composition from one or several of the following elements: modular photo slide drawers modular cassette drawers modular microscope slide drawers

680

All modules are stackable.

480

Modular top (1) code

DS 61

480

external dimensions mm height length width

50

480

480

unit weight

unit volume

2

0.056

Modular photo slide drawers (2)

1 2

Cabinet consisting of 7 independent drawers to hold a total of 1,700 transparencies of 50 x 60 mm. Dimensions of a drawer: 58 x 475 mm. code

DS 12

external dimensions mm height length width

120

480

480

unit weight

unit volume

10.5

0.056

Modular cassette drawers (3)

3

Cabinet consisting of 6 double drawers laid on 3 levels. Each drawer has 2 compartments. The cabinet can hold approximately 1800 embedding rings. Internal dimensions of each drawer: 68 x 475 mm.

code

DS 35

external dimensions mm height length width

255

480

480

unit weight

unit volume

17

0.089

Modular microscope slide drawers (4)

4

Consisting of 14 sliding drawers to hold a total of approximately 6,500 microscope slides of 26 x 76 mm. Internal drawer dimensions: 27x475 mm. code

DS 11

external dimensions mm height length width

140

480

480

unit weight

unit volume

15

0.053

Modular base (5)

5

To ďŹ t all modular cabinets and drawers. code

DS 62

external dimensions mm height length width

120

480

480

unit weight

unit volume

5

0.056

95


96

5. MICROSCOPY AND STAINING


5. MICROSCOPY AND STAINING

97


98

5. MICROSCOPY AND STAINING STAR FROST® ADHESIVE slides Standard size: 26 x 76 mm. Thickness: 1mm. Made in Germany. High definition, pre-washed glass. Hydrofophobic. No stain residues, no proteins in the surface, DNAse, RNAse free. Feature a white, 20 mm marking area. This special printed area is resistant to all common chemicals used in the laboratories, and may be marked with pencil, ballpoint pen, marker and different laboratory-printers (e.g. Leica XPS). Thanks to the single side printing the user always knows the best surface to be used. Star Frost® Adhesive slides are treated with silane-coating, which ensures cell-and-tissue-adhesion and supports the forming of covalent bonds between the tissue and the glass surface through electrostatic attraction. So tissue and cell substrates stick rapidly on the surface without using further adhesives or protein coating media, saving costs and time. This adhesive coating is restricted to the top surface and therefore to the usable area only. As the underside is untreated, the slides do not tend to stick when stacked or transported as with other competitive products. StarFrost® Adhesive slides do not show striae and disturbing background staining such as the blue or red background obtained with Haematoxylin and Eosin-staining of tissues on Albumin coated glass, or the brown background obtained during the Immunoperoxidase or In-situ-DNS-Hybridisation process. They are ideal for molecular-hybridization, as being DNASe and RNAse there is no need of washing them with chromic-acid.

NEW

Available with ground edges 90º or beveled edges 45º. Supplied in boxes of 50 units. Final package (20 boxes) by tropical pack. Conforms with ISO 8037/1 (european standard). Expiry date: 14 months after manufacturing date.

Tropical Pack

code

corners

case quantity

case weight

case volume

A100018

polished, 90º

20 x 50

4.98

0.003

NEW A100019

bevelled, 45º

20 x 50

4.98

0.003

TROPICAL PACK: Aluminium film designed to protect slides from humidity.

STAR FROST® slides Standard size: 26 x 76 mm. Thickness: 1mm. Made in Germany of high definition, pre-washed glass. Hydrofophilic (epoxy). Feature a colour-coded, 20 mm marking area. This special colour-printed area is resistant to all common chemicals used in the laboratories, and may be marked with pencil, ballpoint pen, marker and different laboratory-printers (e.g. Leica XPS). Thanks to the single side printing the user always knows the best surface to be used. Ground edges at 45º (angle). Supplied in boxes of 50 units. Final package (20 boxes) by tropical pack. Expiry date: 14 months after manufacturing date. code

strip colour

case quantity

case weight

case volume

A100010

white

20 x 50

4.98

0.003

A100011

green

20 x 50

4.98

0.003

A100013

blue

20 x 50

4.98

0.003

A100014

yellow

20 x 50

4.98

0.003


5. MICROSCOPY AND STAINING

EUROTUBO® slides Standard dimensions: 25.6 x 75.6 mm. (± 0,2) Clear, pre-washed glass, 1.05 mm (± 0,05) thick. Ideal for routine analysis. Displayed in cases of 50 units. Each case is vacuum packed, in tropical pack, easy to open, with no need for scissors. Each case includes a bag of silica salt. Expiry date: 15 months after manufacturing date.

code

description

case quantity

case weight

case volume

D100001

edges 90º

50 x 50

12.70

0.010

D100002

edges 45º

50 x 50

12.70

0.010

edges 90º frosted end 20 mm edges 45º frosted end 20 mm

50 x 50

12.70

0.010

50 x 50

12.70

0.010

D100003 D100004

EUROTUBO® cover slides Specific use: protection of the sample and lens. Clear, pre-washed glass. Thickness: No 1: 0.13 x 0.16 mm. Supplied in cases of a hundred or two hundred units (depending on the code). Each case includes a bag of silica salt, and is supplied vacuum in tropical pack. Easy opening, no need for scissors.

code

dimensions mm

case quantity

case weight

case volume

D101818

18 x 18

10 x 200

0.51

0.0009

D102020

20 x 20

10 x 200

0.58

0.0011

D102222

22 x 22

10 x 200

0.58

0.0011

D102240

22 x 40

10 x 100

0.48

0.0008

D102424

24 x 24

10 x 200

0.58

0.0014

D102432

24 x 32

10 x 100

0.46

0.0008

D102440

24 x 40

10 x 100

0.51

0.0008

D102450

24 x 50

10 x 100

0.62

0.0008

D102460

24 x 60

10 x 100

0.71

0.0008

99


100

5. MICROSCOPY AND STAINING Microscope slide labels 23 x 23 mm Write on these permanent adhesion labels and stick them onto microscope slides for better identification. White colour.

code

quantity

weight

volume

901600

1,000 labels

2.5

0.020

Mounting medium for microscopy VITROCLUD® quick-hardening mounting medium for microscope preparations. Neutral and colourless. Short hardening time (20 min). Refractive index at room temperature: 1.5. Resistant to heat, cold (down to –17ºC), humidity and light including UV rays. It is recommended to close the container immediately after use. If the medium becomes too viscous, add Xylene. Supplied in aluminium bottles for a safer storage. Store at maximum 20º C.

code

description

case quantity

case weight

case volume

A20100

bottle 100 ml

1

0.20

0.001

A20250

bottle 250 ml

1

0.26

0.001

A20500

bottle 500 ml

1

0.60

0.001

Staining tray Made of ABS. It will accept up to 20 slides on four plastic rails covered by a polymer strip to perfectly hold slides even if tray is held at an angle (see picture A). When humidity is required, wells between rails may hold water, and raised rails will avoid water from touching the slides. It features a draining plug to ease the emptying of the tray (see picture B). Four rubber feet ensure stability. Clear lid made of PETG (also available in black ABS, for fluorescence work; ask for delivery time). Dimensions with cover: 38 x 24 x 4.5 cm. Cannot be used with acetone and chlorinated hydrocarbons.

Please ask our Sales Department for order details


5. MICROSCOPY AND STAINING

Stains code

description

c (IVD)

808000

Danger symbols: R11-23/24/25-39/23/24/25. S 7-16-36/37-45 Transport norms: UN: 1992. ADR: 3/19b.IMDG: 3.2/II. IATA: 3/II. PAX: 305. CAO: 307

c (IVD)

808001

Danger symbols: R11-23/24/25-39/23/24/25. S 7-16-36/37-45 Transport norms: UN: 1992. ADR: 3/19b.IMDG: 3.2/II. IATA: 3/II. PAX: 305. CAO: 307

c (IVD)

808100

Danger symbols: R11-23/24/25-39/23/24/25. S 7-16-36/37-45 Transport norms: UN: 1992. ADR: 3/19b.IMDG: 3.2/II. IATA: 3/II. PAX: 305. CAO: 307

c (IVD)

808101

Danger symbols: R11-23/24/25-39/23/24/25. S 7-16-36/37-45 Transport norms: UN: 1992. ADR: 3/19b.IMDG: 3.2/II. IATA: 3/II. PAX: 305. CAO: 307

c (IVD)

case quantity

case weight

case volume

16

6.00

0.046

12

13.00

0.046

16

6.00

0.046

12

13.00

0.046

Eosin, solution, May Grunwald, 250 ml bottle

Eosin, solution, May Grunwald, 1000 ml bottle

Eosin, solution modified Giemsa, 250 ml bottle

Eosin, solution modified Giemsa,1000 ml bottle

Eosin, solution Wright, 250 ml bottle

808200

Danger symbols: R11-23/24/25-39/23/24/25. S 7-16-36/37-45 Transport norms: UN: 1992. ADR: 3/19b.IMDG: 3.2/II. IATA: 3/II PAX: 305. CAO: 307

16

6.00

0.046

805000

Gram differential staining, Kit containing 4 250 ml bottles*

12

24.00

0.046

805001

Danger symbols: R-11-36-66-67. S 9-16-26 Transport norms: UN: 1993 ADR: 3/3b. IMDG: 3,2/II. IATA: 3/II PAX: 305. CAO: 307

16

6.00

0.046

Lugol Iodine, 250 ml bottle.

16

6.00

0.046

16

6.00

0.046

Gram decolorzing, 250 ml bottle.

806030

Danger symbols: R52

Violet crystal solution (Gentian violet), 250 ml bottle

805040

Danger symbols: R-21/22-36/38. S 28a Transport norms: UN: 2810 ADR: 6/25c. IMDG: 6.1/III. IATA 6.1/III. PAX: 611. CAO: 608

805140

Danger symbols: R-21/22-36/38. S 28a Transport norms: UN: 2810 ADR: 6/25c. IMDG: 6.1/III. IATA 6.1/III. PAX: 611. CAO: 618

12

13.00

0.046

805010

Ziehl differential staining, Kit containing 4 250 ml bottles**

12

24.00

0.046

805011

Danger symbols: R-11-36/37/38 S 7-16-26-45 Transport norms: UN: 2924 ADR: 3/26b. IMDG: 3,2/II. IATA: 3/II PAX: 305. CAO: 307

16

6.00

0.046

Violet crystal solution (Gentian violet), 1000 ml bottle

Ziehl decolorizing, 250 ml bottle

c (IVD)

805050

Safranin solution, 250 ml bottle

16

6.00

0.046

805150

Safranin solution, 1000 ml bottle

12

13.00

0.046

805120

Ziehl fuchsin solution, 1000 ml bottle Danger symbols: R10-21/22-36/38. S 36/37.

12

13.00

0.046

805030

Methylene blue, 250 ml bottle

16

6.00

0.046

805130

Methylene blue, 1,000 ml bottle

12

13.00

0.046

805013

fast stain for blood extensions, 250 ml containers, 2 containers A, 2 containers stain B

12

20.00

0.046

* 1 Iugol, 1 violet crystal, 1 Gram decolorizing, 1 safranin. ** 1 fuchsin, 1 methylene blue, 2 Ziehl decolorizing. Minimum order quantity: 1 bottle or kit.

101


102

5. MICROSCOPY AND STAINING Staining jars with lid Material: autoclavable TPX. Two options available: vertical, “Hellendhall” type (Code 19335) horizontal “Schifferdecker” type (Code 19351).

code

19355 19351

description vertical, for 8 slides horizontal, for 10 slides

case quantity

dimensions mm

case weight

case volume

20 x 50

58 x 53.5 x 86

0.20

0.001

20 x 50

76 x 65 x 45

0.25

0.002

Staining jar Made of POM (polyoxymethylene). Colour: black. Ideal for slide staining. Good resistance to alcohols and xylol (not to phenol). Consists of a jar with a lid for slide staining. Leakproof. Includes a white perforated slide partition for drying. Not suitable for microwaves.

code

dimensions mm

case quantity

case weight

case volume

191101

100 x 87 x 51

1

0.11

0.001

Staining rack Made of POM (polyoxymethylene). Colour: black. Ideal for slide staining. Good resistance to alcohols and xylol (not to phenol). Accepts 25 slides. Includes a folding handle, and 25 numbered slots to facilitate classification. Slides insert easily in the rack. The rack ideally fits into the staining through presented above. No suitable for microwaves code

dimensions mm

case quantity

case weight

case volume

191100

91 x 79 x 38

1

0.03

0.001


5. MICROSCOPY AND STAINING

1

2

Staining system Slide staining system compound of a range of jars, and a 12 slides staining rack. Different jar colours allow the user to distinguish each stage of the staining process. Jar and rack made of autoclavable acetal polymer, resistant to staining agents as alcohol, xylene … (not phenol). The jar embodies a hinged lid which allows storing the jar with the content. Reagent capacity: 80 ml. Jars can be loosely joined to each other laterally (picture 1). The rack features a handle in the hinged lid, and can be placed up when handled out of the jar. Since the slides are placed vertically in the rack, their writing area will not be stained, allowing their removal without the use of forceps (picture 2). Rack and jar withstand from -170 and +121ºC. Jar dimensions: 64 x 76 x 92 mm. Rack dimensions: 60 x 64 x 97 mm. code

description

case quantity

case weight

case volume

191104

blue jar

6

0.68

0.0059

191105

green jar

6

0.68

0.0059

191106

white jar

6

0.68

0.0059

191107

yellow jar

6

0.68

0.0059

191108

dark grey rack

6

0.32

0.0024

Staining jar and dish Dish made of polypropylene and jar made of autoclavable TPX. The jar is supplied with two lids. The first lid provides evaporation free storage of staining liquid when the dish is not in use. The second includes a slot to allow staining dish insertion. Code 19353: height (with lid) 70 mm, height (without lid) 65 mm, lenght 100 mm and width 75 mm. Code 19354: height 21 mm, length 83 mm, width 70 mm and lenght (handle) 160 mm. code

description

case quantity

case weight

case volume

19353

jar with 2 lids

4

0.35

0.004

19354

staining dish for 20 slides

2

0.20

0.001

103


104

5. MICROSCOPY AND STAINING Staining racks Stainless steel. Models S-004 and S-002 can be leaning over to drain off the stain without falling the slide. description

quantity

S-004

for 12 slides length: 435, width: 85 mm

1

S-002

for 24 slides lenght: 435, width: 175 mm

1

S-003

without dividers lenght: 435, width: 85 mm

1

code

Handmade products. Other stainless steel models can be made on request.

Staining jar and basket Code 19360 is a stainless steel staining jar. With a lid to avoid evaporation. Made of stainless steel, this staining basket is designed for 30 slides of 26 x 76 mm for use in the above staining jar, code 19360. Includes an adjustable handle for more convenience.

code

description

dimensions mm

case quantity

case weight

case volume

19360

jar

115 x 88 x 77

1

0.60

0.001

19361

basket

110 x 85 x 55

1

0.13

0.001

Special baskets and trays for slides Baskets are manufactured from stainless steel wire. Cuvettes are made of neutral glass and feature stainless steel lids. Models CP-24, CP-30, CP-50 have folding handles. code

CP-30 H CP-45 H

description basket for 30 horizontal slides basket for 45 horizontal slides

dimensions mm

case quantity

case weight

case volume

172 x 86

1

0.150

0.0011

235 x 85

1

0.186

0.0015

C-45

glass tray with lid

253 x 93

1

0.400

0.0017

CP-24

basket for 24 vertical slides

70 x 70

1

0.095

0.0003

CP-30

basket for 30 vertical slides

70 x 90

1

0.110

0.0004

CP-50

basket for 50 vertical slides

70 x 132

1

0.140

0.0008

Coplin type staining jar Jar made of opaque white, unbreakable and autoclavable polypropylene, designed for staining 5 standard microscope slides. Rectangular container with rounded base and screw ribbed ďŹ&#x201A;at cap with an inner ring for preventing leakage. Used as a storage system, it can hold up to 10 slides (2 per groove). Dimensions: Base diameter: 60 mm. Height of jar: 110 mm. Height of jar with cap: 114 mm.

code

description

case quantity

case weight

case volume

191087

Coplin jar for 5 slides

12

0.68

0.003


5. MICROSCOPY AND STAINING Slidefolder Made of hight impact polystyrene. It will hold up to twenty standard slides. The case holding the slides horizontally offers numbered spaces for easy identification. Will resist temperatures between –80º C and +100º C. Not autoclavable. The two transparent doors cover the slides and offer a full view of each slide without having to remove them. Easy opening. Stackable. External dimensions: 192 x 292 x 11 mm.

code

slidefolder colour

case quantity

case weight

case volume

989945

blue

10

3.63

0.013

Slide tray Made of high impact polystyrene. It will hold up to twenty standard slides. The slide tray is easily stackable and will take minimum space on any shelf or laboratory counter. External dimensions: 206 x 299 x 18 mm. Not autoclavable. code

slidefolder colour

case quantity

case weight

case volume

989956

white

10

0.91

0.013

Easy insert and remove with only two fingers

SEE OUR SLIDES ON PAGES 98-99

Slide trays Material: polystyrene. Stackable. code

description

dimensions mm

case quantity

case weight

case volume

989910

slide tray for 10 slides

95x330x50

40

2.30

0.015

989920

slide tray for 20 slides

195x330x50

20

2.30

0.015

105


106

5. MICROSCOPY AND STAINING

2

3

4 5 1

Slide mailer Made of polypropylene. Designed for slide transport and protection. Compartment shape ensures tight ďŹ t: no risk of damaging slides. Easy snap-lock, but not indicated for liquid samples. code

slide capacity

1

19923

1

2

900025

2

3

mod.

dimensions mm

case quantity

case weight

case volume

80 x 40 x 6

50

0.40

0.009

87 x 47 x 16

100

1.40

0.009

979930

2

84 x 71 x 6

250

3.50

0.040

4

19924

3

84 x 99 x 6

10

0.28

0.001

5

900028

5

82 x 17 x 29

100

1.28

0.012

Slide tube mailer

NEW

Multipurpose container for mailing, staining or storing microscope slides. Tube made of polypropylene, pink screw cap made of high density polyethylene. It holds up to 4 standard slides vertically. It incorporates a tamper evident leakproof screw cap ensuring your peace of mind during transport or storage situations where someone might have manipulated your slides without your prior knowledge. Can also be used without the tamperproof locking mechanism. For color coding purposes, use an insert (range 409111A, see Chapter 7. Tubes and microtubes) that may be inserted on top of closure. The container is designed for maximum stability on a bench top while having an internal volume of only 12 ml. Being transparent helps the user to notice if there are slides in it, an advantage in front of the popular white transport tubes. Dimensions: 35 x 87 mm. code

description

case quantity

case weight

case volume

19926

tamper evident tube

100

2.00

0.020


5. MICROSCOPY AND STAINING

2

3

2 3 1

Slide storage boxes Manufactured in ABS, beige or blue colour. Economical boxes to store or transport 25, 50 or 100 slides. Safe closing and easy opening. They include numbered sheets with a labeling space in the bottom of the case and in the inner side of the cover (excepting model 1, which does not include the one in the inner side of the cover). Models 2 and 3 have a special modeling assuring a good stability when stacked.

mod.

code

slide capacity

dimensions mm

case quantity

case weight

case volume

1

19276.B

beige slide box for 25 slides

93 x 87 x 32

200

10.60

0.07

2

3

19276.A

blue slide box for 25 slides

93 x 87 x 32

200

10.60

0.07

19277.B

beige slide box for 50 slides

200 x 89 x 32

100

12.50

0.07

19277.A

blue slide box for 50 slides

200 x 89 x 32

100

12.50

0.07

19278.B

beige slide box for 100 slides

200 x 170 x 32

50

12.26

0.07

19278.A

blue slide box for 100 slides

200 x 170 x 32

50

12.26

0.07

Minimum order quantity: 5 slide boxes.

Cylindrical slide mailer Polypropylene. Ideal for storing and transporting 5 to 10 slides in complete safety. The deep threaded container provides a leakproof seal for transport. code

description

case quantity

case weight

case volume

19922

for 10 slides

10

0.28

0.003

107


108

5. MICROSCOPY AND STAINING Slide storage boxes Manufactured in different colours of polystyrene. Capacity can be doubled if two slides are placed into the same cell. The internal cork lining prevents damage to stored slides. To ensure proper slide identiďŹ cation, each slot is numbered to correspond to the slide inventory sheet on the inside cover of the box. Stackable. Dimensions: 208 x 162 x 32 (100 slides). This model feature has a safety closure. code

description

case quantity

case weight

case volume

19278.2

red, for 100 slides

1

0.30

0.002

19278.3

white, for 100 slides

1

0.30

0.002

Microscope slide boxes Made of high impact polystyrene, those boxes are designed for slides. Each slot is numbered and can be cross-referenced with the corresponding index card supplied with each box. Boxes are virtually unbreakable. Stackable. Dimensions mm: 98 x 83 x 38 (25 slides), 230 x 97 x 35 (50 slides), 230 x 180 x 35 (100 slides). code

description

case quantity

case weight

case volume

19276

for 25 slides

4

0.38

0.002

19277

for 50 slides

1

0.24

0.002

19278

for 100 slides

1

0.32

0.002

Slide boxes Plain polyethylene slide box with clear polypropylene lid. Not numbered. Stackable. Dimensions in mm: 105 x 88 x 32 (25 slides), 200 x 88 x 32 (50 slides) code

description

case quantity

case weight

case volume

19276.1

for 25 slides

48

3.56

0.019

19277.1

for 50 slides

24

3.40

0.017

Automatic slide dispenser Made of ABS and PS, this dispenser can hold up to 50 standard slides.Slides are dispensed individually by rotating the knurled knob on either side of the moulded base. code

description

case quantity

case weight

case volume

19540

for 50 slides 26 x 76 mm

1

0.20

0.002


5. MICROSCOPY AND STAINING

Slide storage system for 100 slides. Stackable Made of high impact polystyrene. It can hold up to 200 standard slides. Compound by a box with a transparent lid with an easy opening and an internal removable rack. This removable rack is divided into two parts with 50 numbered slots in each one, so 100 slides can be separately placed and their strips can be read. For space saving purposes, you can double the amount of slides simply by storing 2 slides per slot, so each part can hold up to 100 slides resulting in a total capacity of 200 slides. They can also be used without the internal rack, so the capacity reaches 400 slides. Stackable. The internal rack allows discarding all the slides at the same time. The frontal part of the box can be written. External dimensions: 82 x 245 x 86 mm. code

colour

case quantity

case weight

case volume

19279.5

blue

10

3.3

0.023

19279.7

green

10

3.3

0.023

19279.3

yellow

10

3.3

0.023

See minimum and delivery time for other colors.

Slide storage system for 50 slides. Stackable Same characteristics as previous codes, it has half capacity. Each part of the inner rack can hold up to 25 separate slides with a total capacity of 50 slides, or for space saving purposes it has a total capacity of 100 slides by storing 2 slides in each slot. External dimensions: 82 x 140 x 86 mm. colour

case quantity

case weight

case volume

19274.5

blue

10

1.5

0.013

19274.7

green

10

1.5

0.013

code

Minimum order quantity: 1 storage system.

Economical storage box This box, complete with a lid, is specially designed for the storage of histology cassettes. Made of heavy-duty cardboard for long term storage. Each box stores up to 250 cassettes or 160 embedding rings. Dimensions: 455 x 235 x 50 mm. code

description

case quantity

case weight

case volume

DS 42

waterproof cardboard

18

5.3

0.132

109


110

6. SAMPLING AND TRANSPORT


6. SAMPLING AND TRANSPORT

111


112

6. SAMPLING AND TRANSPORT 1. rounded wire 2. flat thicker wire

1

2

Whirl-Pak bags with flat wires Same features as those from the following page but with a flat thicker wire instead of rounded wire resulting in a safer closure, which is preferred in some markets. With white write-on strip. Steriles by ethylene oxide.

code

capacity ml

dimensions cm

thickness microns

case quantity

case weight

case volume

200356

540

11.5 x 23

64

500

2.04

0.0073

Whirl-Pak stand-up bags Same characteristics as whirl-pak standard bags. However, they have a flat bottom which permits them to remain stand up when the sample is inside the bag. This allows to have both hands free when working so you can add or to extract the content comfortably. No need of any rack. Working as a beaker or bottle, when they are empty they take up much less space. They have a write-on white strip. Ethylene oxide sterilized. code

200361

NEW 200365

Sampling kits: meat or surfaces Kits designed according ISO standars. Available with sponge or swabs. See more information in Chapter 1. Microbiology.

capacity ml

dimensions thickness cm microns

case quantity

case weight

case volume

540

11.5 x 23

64

500

2.50

0.0073

2,070

19 x 38

102

250

4.31

0.046


6. SAMPLING AND TRANSPORT

1

1. 2. 3. 4a. 4b. 5.

2

3

4a

4b

Tear off top of bag along perforation. Use pull tabs to open bag. Place sample in bag. Hold bag by wire ends and whirl three times to close. Or, fold the tab over tightly three times to close (used to close larger bags). Bend wire ends onto bag.

Sterile Whirl-Pak sample bags Made of a low density polyethylene blend, resulting in a very resistant and transparent bags. Suitable for both solid and liquid samples. The plastic thickness depends on the model (57 to 102 Îź). This special polyethylene blend makes unnecessary a higher thickness to achieve higher resistance. Leakproof closure by several metallic rounded sticks when you turn closure bands three times (see scheme). The Whirl-Pack bags are the unique bags with a one-piece seam, avoiding the possible risks of the loss of the corners bags. Ethylene oxide sterilized. Suitable for food industry. Without strips code

capacity ml

dimensions cm

thickness microns

case quantity

case weight

case volume

200325

60

7.5 x 12.5

57

500

0.91

0.0048

200340

120

7.5 x 18.5

57

500

1.14

0.0062

200341

210

9.5 x 18

76

500

1.70

0.0062

200342

390

13 x 19

76

500

2.50

0.0195 0.0073

200329

540

11.5 x 23

64

500

1.66

200332

720

15 x 23

76

500

2.94

0.017

200343

720

15 x 23

102

500

2.94

0.017

200344

810

12.5 x 30

76

500

3.63

0.0195

200345

1,080

12.5 x 38

76

500

4.20

0.0195

200346

1,260

15 x 38

76

500

4.99

0.0195

200347

2,070

19 x 38

76

500

9.50

0.0203

dimensions cm

thickness microns

case quantity

case weight

case volume

White strips bags code

capacity ml

200326

60

7.5 x 12.5

57

500

0.91

0.0048

200349

120

7.5 x 18.5

57

500

1.14

0.0062

200364

390

13 x 19

64

500

2.02

0.017 NEW

200330

540

11.5 x 23

64

500

1.93

0.0073

200333

720

15 x 23

76

500

3.29

0.0195 0.0203

200351

1,650

19 x 30

102

500

6.13

200363

2,070

19 x 38

76

500

5.54

0.019 NEW

200357

2,700

25.4 x 38

102

250

5.32

0.023 NEW

200358

3,600

25.4 x 50.8

102

250

6.46

0.023 NEW

200359

5,400

38 x 50.8

102

100

4.68

0.023 NEW

The bags capacity is the one achieved with the closing achieved following the instructions described above and the volumes are only approximated. Do not use temperatures up to 82 ÂşC. Non autoclavable.

See Whirl-pak blender bags in Chapter 1. Microbiology

5

113


114

6. SAMPLING AND TRANSPORT Zip-lock bags Made of transparent polyethylene, very resistant to shocks and tearing. For all solid samples. Suitable for laboratories (for tubes, swabs...) as well as industries (to contain, spare pieces, small electronic components, buttons, sweets...).

code

thickness mm

dimensions mm

M 5555

0.05

55 x 55

2,000

M 6080

0.05

60 x 80

1,000

M 70100

0.05

70 x 100

2,000

M 80120

0.05

80 x 120

2,000

M 80160

0.05

80 x 160

2,000

M 100150

0.05

100 x 150

2,000

M 110110

0.05

110 x 110

2,000

M 120180

0.05

120 x 180

2,000

M 150220

0.05

150 x 220

2,000

M 180250

0.05

180 x 250

2,000

M 200300

0.05

200 x 300

2,000

M 250330

0.05

250 x 330

2,000

M 300400

0.05

300 x 400

2,000

quantity

White strip zip-lock bags Same features as the above products. Feature white strips for writing for better sample identiďŹ cation. code

thickness mm

dimensions mm

quantity

M 5555B

0.05

55 x 55

2,000

0.05

60 x 80

1,000

NEW M 80120B

0.05

80 x 120

1,000

M 70110B

0.05

70 x 110

1,000

M 6080B

M 100150B

0.05

100 x 150

1,000

M 120180B

0.05

120 x 180

1,000

M 160220B

0.05

160 x 220

1,000

NEW M 180250B

0.05

180 x 250

1,000

NEW M 200300B

0.05

200 x 300

1,000

We manufacture racks for handling and transport of bags. See Chapter 10. Sample storage and Cryogenics.

Multifunction bag Manufactured in polyethylene (125 microns). Useful for transporting different kind of samples and documents. It has a zip closure and a blue strip in the top. It can be used as many times as necessary. Long-lasting use. code

dimensions mm

case quantity

case weight

case volume

200338

250 x 195

100

2.00

0.007


6. SAMPLING AND TRANSPORT Leakproof bags for sample storage Designed for the storage and transport of solid and liquid samples. Withstand most acids. Include a double safety seal. Made of Saranex, a ďŹ lm composed by ďŹ ve layers EVA-PEBD-SaranPEBD-EVA. Very resistant to shocks and tearing, thus eliminating the use of two bags. Gamma sterilizable. code

dimensions cm

capacity ml

case quantity

case weight

case volume

200300

5 x 10

36

250

1.00

0.004

200301

8 x 15

158

250

1.30

0.004

200302

15 x 15

540

250

1.50

0.006

200303

18 x 20

1,121

250

2.00

0.008

200304

23 x 30

3,295

250

3.40

0.015

200305

30 x 30

4,893

250

4.40

0.015

Specimen transport kangaroo bags For tube transport. Double pouch design: one for specimen tubes and the other for documents. Includes a safety seal. Reclosable (zip-lock design). Dimensions: 16 x 16.5 cm. Made of polyethylene. code

couleur

case quantity

case weight

case volume

V 160230

green

2 x 1.000

13,8

0,03

N 160230

orange

2 x 1.000

13,8

0,03

See blender bags in Chapter 1. Microbiology

Whirl-Pak specimen transport kangaroo bag Non-sterile bag made of a low density polyethylene blend, resulting in a very resistant and transparent bag. Designed for both solid and liquid samples. Leakproof closure with several metallic rounded sticks. Double pouch design: one for specimen tubes and the other one for documents. It features the biohazard symbol. Bag with a one-piece seam, avoiding the possible risks of the loss of the corners bags.

code

capacity ml

dimensions cm

thickness microns

case quantity

case weight

case volume

200372

720

15 x 23

64

500

3.41

0.0170

115


116

6. SAMPLING AND TRANSPORT Autoclave resistant bags Printed with the biohazard symbol and instructions of use. Two versions available: s 4RANSPARENTANDTRANSLUCENT SUITABLEFORROUTINEAUTOCLAVING s 2EDCOLOR SUITABLEFORAUTOCLAVINGATÂ&#x17D;#THEYFEATUREASTERILIZATIONINDICATOR See more information in Chapter 11. Safety.

c (EPI) c (MDD)

Exam gloves Wide range of single use gloves AQL 1.5. Different options available: s 0OWDEREDANDNONPOWDEREDLATEX s 0OWDEREDANDNONPOWDEREDVINYL s .ONPOWDEREDNITRILE

See more information in Chapter 11. Safety.

Swabs for microbiological sampling

c (MDD)

Sterile swabs with or without transport media. Tips made of viscose, cotton, dacronŠ,â&#x20AC;Ś Supplied in tube, peel pack, ďŹ&#x201A;ow pack,â&#x20AC;Ś Transport media available: s !MIESWITHANDWITHOUTCHARCOAL s 3TUART s #ARY"LAIR s 6IRUS s #HLAMYDIA See more information in Chapter 1. Microbiology.

Forceps Made of P.O.M. Colour: orange. Self-sprung forceps with rounded ends. Code 19503, the inner part of the tip is ribbed to enhance sampling. Ribbed for a better handling. Autoclavable. Flexible. code

length mm

case quantity

case weight

case volume

19500

115

5

0.02

0.0010

19501

145

5

0.06

0.0010

19503

250

5

0.08

0.0010


6. SAMPLING AND TRANSPORT c (MDD)

Cytology brush

Blue ABS shaft. For cervical specimen collection, designed for taking cell samples without damaging them. Includes a soft tip to provide more comfort for patients. Total length: 19.5 cm. Sterile model is sterilised by ethylene oxide and includes instructions. case quantity

case weight

case volume

non sterile

50 x 50

4.55

0.010

individual peel-pack

2 x 500

3.90

0.029

description

code

440150 440151

STERILE

c (MDD)

Vaginal speculum

Made of transparent polystyrene. They feature a fixation device made of polyamide, which allows the user to safely position the angle. Anatomically designed, with rounded edges for improved comfort. Ergonomically designed for single-handed use. Smooth and easy to manipulate. Individually wrapped. Aseptic. Available in three sizes identified by the color of the fixation device. code

shaft width

colour

case quantity

case weight

case volume

440154

24 mm

green

100

4.40

0.063

440155

27 mm

blue

100

4.40

0.063

440156

30 mm

white

100

4.40

0.063

c (MDD)

AYRE wood spatula

Rounded edges. Sterile model is sterilised by ethylene oxide and includes instructions.

440142.0 444150

case quantity

case weight

case volume

non sterile

50 x 100

10.55

0.025

individual peel-pack

2 x 500

5.10

0.029

description

code

STERILE

c (MDD)

AYRE plastic spatula

Made of autoclavable polypropylene. Rounded edges. Sterile model is sterilised by ethylene oxide and include instructions. description

code

case quantity

case weight

case volume

non sterile

5 x 500

7.0

0.025

444142

STERILE

individual peel-pack

2 x 500

4.6

0.029

444242

STERILE

individual flow-pack

2 x 500

4.9

0.029

440142

Minimum ordening quantity: 500

117


118

6. SAMPLING AND TRANSPORT

1

4

6

3 2

5

Blisters for transport of diagnostic samples Blisters made of polypropylene, designed as a system to protect samples contained in swabs, tubes or ďŹ&#x201A;asks, during transport. Perfect as a primary package, they can be used several times. Supplied ďŹ&#x201A;at and stacked. mod.

code

1

case quantity

capacity

case weight

case volume

120100

for 1 tube 10 ml

250

4.60

0.06

2

120101

for 2 tubes 10 ml

500

10.80

0.11

3

120102

for 6 tubes 5 ml / 3 tubes 10 ml

250

7.40

0.09

4

120103

for 1 container 50 ml

250

7.00

0.06

5

120104

for 1 swab

250

6.00

0.07

6

120105

for 7 swabs

200

8.00

0.15

To meet the requirements of packaging instruction P650 a piece of absorbent paper (See Chapter. 11. Safety) should be included inside the secondary container (blister) to prevent from any leakage.

Mailing container See blood collection tubes on Chapter 3. Haematology and Biochemistry.

Mailing container with safety screw blue cap, both manufactured in polyethylene. Leak proof. Dimensions uncapped 128 x 30 mm. Ideal for 10 ml tubes. The tube includes a piece of absorbent paper to prevent from any leakage. Container and cap are sold separately. code

description

case quantity

case weight

case volume

401301

mailing container

500

7.70

0.08

401302

screw cap

500

2.00

0.03


6. SAMPLING AND TRANSPORT

Isothermal bags Isothermal bags for the transport of biological samples, manufactured from PVC, PE and polyurethane (foam). The isothermal bags have two functions: keeping the temperature of samples for 6 hours while being transported, whatever the climatic CONDITIONSPROTECTINGTHESAMPLESANDTHEIRCONTENTS!VAILABLEINGREEN Description: for added security, isothermal bags feature three different locks: by velcro (excepting 6 l model), by zip fastener and by a coded padlock. Bags include the following elements: - an inner pocket designed to hold the cold packs, - a transparent outer pocket, at the front of the bag, for laboratory identiďŹ cation, - a transparent pocket, over the top of the bag, to insert documents. - Two cold packs (except 900073 which incorporates only 1) consisting of HDPE packs ďŹ lled with a non toxic gel. Before use, place cold packs in the freezer and keep at 20ÂşC/-24ÂşC for 24 hours. Quality features: - Bags manufactured from sturdy and shockproof materials. - Stand out from other isothermal bags existing on the market for their lightness and convenience. - Offer a total security seal thanks to padlock. - Space-saving and supplied folded in to reduce volume by 50 %. - To clean, simply use standard detergents. - Corners are rounded and reinforced by a double seam. - Handles are sewn all around the bag for increased strength. - Isothermal bags are traditionally manufactured (non-automated production), and each product undergoes rigid quality controls. code

dimensions mm

capacity

case quantity

case weight

case volume

900073

230x230x170

6

1

0.92

0.009

900074

220x220x260

10

1

1.20

0.013

900076

390x250x280

27

1

1.40

0.027

900078

450x300x300

40

1

1.54

0.041

Slide mailers Designed for slide transport and mailing. Different models (tube, case,â&#x20AC;Ś) for one, two, three, four or even ten slides. See more information in Chapter 5. Microscopy and Staining.

Containers for sampling Polystyrene or polypropylene containers. Volumes from 30 ml to 1,000 ml. See more information in Chapter 8. Containers.

119


120

6. SAMPLING AND TRANSPORT Bottles for water sampling Sterile bottles, designed according to ISO standards for sampling of consumption water. Available with thiosulfate (microbiological analysis) and without thiosulfate (physico-chemical analysis). Bottles are available in polyethylene or PET. Capacities vary from 500 to 1,500 ml. Special configurations: personalized labels, individually bagged bottles, special dosifications of thiosulfate, other bottles or jars from the catalogue,… See more information in Chapter 1. Microbiology.

Water control: absence/presence of Coliforms 125 ml bottle containing culture media, which detects the presence of coliforms in consumption waters (human consumption, industrial, leisure). 24 hours are enough to detect the presence or absence of non enteric bacteria, coliforms, or Escherichia Coli. Easy detection through color change. See more information in Chapter 1. Microbiology.

Long-handled dippers CONTAINER

Polypropylene cup and polyethylene handle. For convenient sampling from tanks, vats, streams, ponds, lakes... The polypropylene cups have threaded fittings that screw onto the handle. Two pouring spouts on the 500 ml dipper make it useful for left or right handed people to pour from either side. The end of the handle has a hook for hanging. Autoclavable container (up to 121°C). code

description

quantity

weight

volume

19575

91 cm handle, 500 ml container

1

0.30

0.001

19576

183 cm handle, 500 ml container

1

0.55

0.002

19577

container 500 ml (fits both handles)

1

0.30

0.005

Please ask for other lengths


6. SAMPLING AND TRANSPORT

c (IVD)

Squared containers, graduated up to 2.7 litres

High density polyethylene container and cap. Ideal for 24 hour urine collection and other liquid samples. The ribbed cap features a pharmaceutical grade joint, which eliminates the need for an insert plug, allows a better handling and provides a watertight seal. Containers are graduated in 50 ml increments up to 2.7 l. Ergonomically designed for single-handed use. Stackable. A ring on the neck of the containers avoids dripping when pouring. Base: 115 x 115 mm Height, cap excluded: 249 mm. Individually wrapped models are supplied capped. Cases per palet: 12. code

body colour

cap description

presentation

individually wrapped

sterile

internal case quantity mouth Ă&#x2DC; mm

case weight

case volume

407005

natural

white, with joint

unscrewed

no

no

65

34

5.70

0.152

407005/T

natural

white, with joint

screwed

no

no

65

34

5.70

0.152

407005.O

natural

white, with joint

screwed

yes

RADIATION

65

34

5.70

0.152

407005.1

natural

white, with joint

screwed

yes

no

65

34

5.70

0.152

407006

brown

white, with joint

unscrewed

no

no

65

34

5.70

0.152

407006/T

brown

white, with joint

screwed

no

no

65

34

5.70

0.152

See more information in Chapter 8. Sample Containers.

121


122

7. TUBES AND MICROTUBES


7. TUBES AND MICROTUBES

123


124

7. TUBES AND MICROTUBES

+ STANDARD TUBE

DELTALAB TUBE

1

STANDARD BOX

2

3

4

5

6

c (IVD)

Round bottom polystyrene tubes Manufactured from high technology, new generation moulds to ensure the reproducibility of each tube. Tubes are made in one piece to ensure uniformity and dimensional accuracy from tube to tube. mod.

code

dimensions mm

volume ml

case quantity

case weight

case volume

cases per pallet

1

300500

11 x 55

3

2 x 2,000

7.50

0.046

40

2

300300

11 x 70

4

3 x 1,000

6.20

0.046

40

3

300800

12 x 75 12 x 75

5

4 x 1,000

9.30

0.075

24

4

300800.2

thick wall

5

4 x 1,000

10.70

0.075

24

5

300800.1

12 x 75

5

4 x 1,000

9.60

0.075

24

6

300400

12 x 88

6

4 x 1,000

11.30

0.082

24

Codes 300800 and 300400 have graduation rings. Code 300800 (mod. 3) is graduated at 1, 2.5 and 4.0 ml; code 300400 (mod. 6) is graduated at 1, 2.5 and 5.0 ml.

Dimensions (Âą0,09)

Suitable for centrifugation up to 7,500 g. A complete range of test tube caps is detailed on page 129 of this catalogue. All tubes are suitable for laboratory use.

code

internal diameter mm

external diameter mm

total length mm

maximum volume ml

300500

10

11.5

54.4

3.5

300300

9.1

10.8

69.4

4.0

300800

10.3

11.8

74.5

5.5

300800.1

10.2

11.8

74.5

5.5

300800.2

10

11.8

74.5

5.3

300400

10.4

12

87.6

5.9


7. TUBES AND MICROTUBES

+ STANDARD TUBE

DELTALAB TUBE

1

STANDARD BOX

2

3

4

5

c (IVD)

Round bottom polystyrene tubes

Manufactured from high technology, new generation moulds to ensure the reproducibility of each tube. Tubes are made in one piece to ensure uniformity and dimensional accuracy from tube to tube. mod.

code

dimensions mm

volume ml

case quantity

case weight

case volume

cases per pallet

1

300700

13 x 75

5

4 x 1,000

12.50

0.082

24

2

301700

13 x 100

7

6 x 500

11.60

0.082

24

3

300900

16 x 95

10

5 x 500

12.00

0.096

20

4

300705

16 x 100

10

5 x 500

14.80

0.110

20

5

300100

16 x 150

17

1,000

11.15

0.093

20

Code 300900 (mod. 3) has graduation rings at 2.5, 5 and 10 ml.

Dimensions (Âą0,09) code

internal diameter mm

external diameter mm

total length mm

maximum volume ml

300700

10.9

12.9

74.7

6.7

301700

11.0

12.9

99.6

8.3

300900

13.8

15.8

94.6

12.2

300705

13.8

16.0

99.8

13.2

300100

14.6

16.3

151.0

21.1

Suitable for centrifugation up to 7,500 g. (excepting code 300100, which does not withstand centrifugation). A complete range of test tube caps is detailed on page 129 of this catalogue. All tubes are suitable for laboratory use.

125


126

7. TUBES AND MICROTUBES

+ STANDARD TUBE

DELTALAB TUBE

1

2

STANDARD BOX

3

4

5

6

7

8

9

c (IVD)

Ultra clear polypropylene tubes Manufactured from high technology, new generation moulds to ensure the reproducibility of each tube. Tubes are made in one piece to ensure uniformity and dimensional accuracy from tube to tube. Autoclavable up to 121 ÂşC. mod.

code

dimensions mm

volume ml

case quantity

case weight

case volume

cases per pallet

1

400500

11 x 55

3

2 x 2,000

6.50

0.046

40

2

400800

12 x 75

5

4 x 1,000

8.00

0.075

24

3

400800.1

12 x 75

5

4 x 1,000

8.00

0.075

24

4

400700

13 x 75

5

4 x 1,000

9.70

0.082

24

5

400400

12 x 88

6

4 x 1,000

9.60

0.082

24

6

401700

13 x 100

7

6 x 500

9.40

0.082

24

7

400900

16 x 95

10

5 x 500

10.10

0.096

20

8

400705

16 x 100

10

5 x 500

12.20

0.096

20

9

401100

15 x 50

5

5 x 1,000

10.40

0.082

24

Certain codes have graduation rings: 400800 (mod. 2): graduated at 1, 2.5 and 4.0 ml; code 400400 (mod. 5): graduated at 1, 2.5 and 5.0 ml; 400900 (mod. 7): graduated at 2.5, 5 and 10 ml; 401100 (mod. 9): graduated at 2.5 and 5 ml.

Dimensions (Âą0,09)

Suitable for centrifugation up to 15,000 g. A complete range of test tube caps is detailed on page 129 of this catalogue. All tubes are suitable for laboratory use.

code

internal diameter mm

external diameter mm

total length mm

maximum volume ml

400500

9.9

11.4

53.9

3.4

400800

10.3

11.7

73.9

5.3

400800.1

10.2

11.7

73.9

5.3

400700

10.9

12.7

73.7

6.4

400400

10.3

11.9

86.9

5.8

401700

11.0

12.7

98.4

8.1

400900

13.7

15.5

93.7

11.9

400705

13.7

15.8

98.6

12.7

401100

13.7

15.5

48.9

6.5


7. TUBES AND MICROTUBES + STANDARD TUBE

DELTALAB TUBE

STANDARD BOX

c (IVD)

Polystyrene tubes capped Suitable for centrifugation up to 7,500 g. Components: code

tube

page

cap

page

300702

300700

19

307107

23, 25

300907

300705

19

308107

23, 25

code

dimensions tube mm

height tube + cap mm

volume ml

case case case cases quantity weight volume pallet

300702

13 x 75

83.4

5

2 x 1,000

7.5

0.046

48

300907

16 x 100

109.6

11

4 x 500

15.0

0.096

20

See Chapter 6. Sampling and Transport.

Polystyrene tubes, capped and labelled

c (IVD)

Suitable for centrifugation up to 7,500 g. Dimensions of the label: 35 x 25 mm. Components: code

tube

page

cap

page

300804

300800

18

305807

23, 24

300704

300700

19

307107

23, 25

300904

300900

19

308107

23, 25

300908

300705

19

308107

23, 25

code

dimensions tube mm

height tube + cap mm

volume ml

case case case cases quantity weight volume pallet

300804

12 x 75

82.9

5

2 x 1,000

7.3

0.046

48

300704

13 x 75

83.4

5

2 x 1,000

7.5

0.046

48

300904

16 x 95

105.0

10

2 x 500

7.1

0.046

48

300908

16 x 100

110.4

11

4 x 500

14.0

0.096

20

127


7. TUBES AND MICROTUBES mod. 2, 6, 8

+ STANDARD TUBE

PP

128

DELTALAB TUBE

1

2

STANDARD BOX

3

4

5

6

7

8

c (IVD)

Conical tubes Manufactured in polypropylene (PP) and polystyrene (PS). mod.

code

dimensions mm

1

301200

16 x 102

PS

2

401200

16 x 102

PP

3

301213

17 x 105

PS

4

301212

17 x 105

PS

5

301201

16 x 100

PS

6

401201

16 x 100

PP

7

301202

16 x 102

PS

8

401204

16 x 100

PP

material

volume ml

case quantity

case weight

case volume

cases per pallet

12

5 x 500

12.9

0.096

20

12

5 x 500

10.6

0.096

20

12

1,500

8.80

0.088

20

12

1,500

8.80

0.088

20

12

5 x 500

12.5

0.096

20

12

5 x 500

10.2

0.096

20

12

5 x 500

12.9

0.096

20

12

5 x 500

10.2

0.096

20

121Âş C

121Âş C

121Âş C

Codes 301200 (mod. 1), 401200 (mod. 2) and 401204 (mod. 8) have internal graduations. Codes 301213 (mod. 3) and 301212 (mod. 4) are ďŹ&#x201A;ared at their top for easy pouring and have a special sedimentation base. Codes 301200 (mod. 1), 401200 (mod. 2) and 301202 (mod. 7) have an external rim.

Dimensions (Âą0,09) code

s

All models are suitable for centrifugation. PS tubes: 7,500 g; PP tubes: 15,000 g. Except code 301212 and 301213 to 3.000 g.

internal diameter mm

external diameter mm

total length mm

maximum volume ml

19.1/16.4

100.8

12.9

s

14.5 14.4

18.8/16.2

99.8

12.5

s

15.4/19.2

17.1/19.2

105.1

16.5

s

15.4/19.2

17.1/22.0

105.0

16.4

301201

14.5

16.4

99.5

12.9

401201

14.4

16.2

98.4

12.5

s

14.5

19.1/16.4

100.8

12.9

401204

14.4

16.2

98.4

12.5

s%XTERNALDIAMETEROFTHERIM


7. TUBES AND MICROTUBES

1

2

3

4

5

6

7

8

9

10

11

Polyethylene caps mod.

code

to fit tubes

bag quantity

bag weight

bag volume

1

3053

300500, 400500, 300800.2

2 x 2,000

1.90

0.008

02

2

3003

300300

5 x 1,000

3.40

0.016

02

2,000

1.90

0.008

02

08

2,000

1.90

0.007

02

08

2,500

3.20

0.016

02

2,500

4.10

0.020

02

2,500

5.00

0.030

02

3

3058

4

3071

5

3072

300800, 400800, 300800.1, 300400, 400400, 400800.1 300700, 301700, 400700, 401700, 300701, serial 300700.6 300705, 300900, 400705, 400900, 401100, 300707 300705, 300900, 400705, 400900, 401100, 300907, 300904, 300908 300705, 300900, 400705, 400900, 401100, 300707, 300907, 300904, 300908

colours (to add at the end of the code)

6

3050

7

3081

8

3070

300100

1,000

1.20

0.010

9

3055

301201, 401201, 301200, 401200, 301202, 401204

2,500

4.00

0.020

02

10

3082

301201, 401201, 401204

2,500

5.10

0.028

02

11

3066

301213, 301212

1,500

1.15

0.008

01

Ask for other colours.

General features of our caps:

3053

Internal diameter: 10.00 mm External diameter: 11.85 mm Total Length: 11.30 mm

Includes a small internal chamber. Light-weighted. Ergonomical. Ribbed for a better handling while using gloves. Cap includes two internal ribs to clamp firmly on the tube. Leakproof.

3003

Internal diameter: 9.25 mm External diameter: 11.35 mm Total length: 16.60 mm

Flat base. No chamber. Ribbed. Cap includes three internal ribs to clamp firmly on the tube. Leakproof.

08

07

06

05

07

06

09

05

07

06

09

05

07

06

08

07 07

06 06

08

05 05

07

06

129


130

7. TUBES AND MICROTUBES

3058

Internal diameter: 10.60 mm External diameter: 15.00 mm Total length: 15.30 mm

Includes a small internal cavity designed to prevent possible drop spillage. Ergonomical. Ribbed for a better handling while using gloves. Leakproof. Cap includes two ribs to clamp ďŹ rmly on the tube. Top of the cap raised for easy-on, easy-off use and to avoid cap deformation from repeated removal.

3050

Internal diameter: 13.95 mm External diameter: 19.30 mm Total length: 13.15 mm

Includes an internal chamber for more liquid ďŹ lling, thus compensating for the loss of space inside the tube caused by the insertion of a cap. Leakproof closing. Ergonomical. Ribbed surface. Cap shape is slightly conical for a better handling. Also features an external ďŹ&#x201A;ap so as to: s AVOIDCONTACTBETWEENLIQUIDANDlNGERSWHENOPENING the tube, s PREVENTDRIPPINGWHENCAPISLEFTONTHEBENCHTOP

s PROVIDEEASYSINGLE HANDEDOPENING

s OFFERACAPSPECIALLYDESIGNEDTOlTOURRANGEOFBLOODCOLLECTION tubes, diameter 15 mm.

3072

3055

3071

Internal diameter: 15.4 mm External diameter: 17.00 mm Total length: 21.6 mm Internal diameter: 14.05 mm External diameter: 17.05 mm Total length: 21.77 mm Internal diameter: 11.25 mm External diameter: 13.30 mm Total length: 17.40 mm

Those three ďŹ&#x201A;ange plug caps present signiďŹ cant advantages over other ďŹ&#x201A;ange caps existing on the market, which are: s s s s s

ALARGERSIZE PROVIDINGALARGERSURFACEFORlNGERREST mANGESHAVEALARGERSIZETHANONOTHERCAPS-ORESPACEBETWEENEACHmANGE INCREASETHECAPSEALINGQUALITIES ASMALLINTERNALCAVITYDESIGNEDTOPREVENTPOSSIBLEDROPSPILLAGE ARAISEDTOPFOREASY ON EASY OFFUSEANDTOAVOIDCAPDEFORMATIONFROMREPEATEDREMOVAL ARIBBEDSURFACE

Note on ďŹ&#x201A;ange cap dimensions: using ďŹ&#x201A;ange caps implies reducing tube capacity. If as much tube volume as possible is required, we recommend the use of those caps including a chamber, such as codes 3082, 3050 and 3081. To avoid possible liquid spillage on the benchtop, leave caps stand with ďŹ&#x201A;anges up.


7. TUBES AND MICROTUBES

3081 Internal diameter: 13.80 mm External diameter: 19.88 mm Total length: 19 mm One of the caps offering the largest chamber on the market, thus compensating for the loss of space inside the tube caused by the insertion of a cap. Leakproof closing. This cap allows an almost complete filling of the tube and eliminates the need for a fill-in line. Ribbed for a better handling while using gloves. 4HE INNER PART OF THE CAP LONG SIZED CONSISTS OF THREE RINGS to ensure a tight, safe leakproof closing. Top of the cap raised for easy-on, easy-off use and to avoid cap deformation from repeated removal. Ideal for use with urine. To avoid possible liquid spillage on the benchtop, leave caps stand with flanges up.

3082

Internal diameter: 14.55 mm External diameter: 20.45 mm Total length: 18.50 mm

It has the same characteristics than the previous cap.

3070

Internal diameter: 14.80 mm External diameter: 19.20 mm Total length: 25.35 mm

Ribbed for a better handling while using gloves. No chamber. Leakproof. Includes four internal rims to clamp firmly on tube. Reversible cap: use it as a watertight seal, or invert it for use in its “re-cap” position, as a simple closure, when no leakproof seal is required.

3066

External diameter: 23.30 mm Total length: 5.90 mm

Light-weighed. Includes a lifting tab for easy opening.

131


7. TUBES AND MICROTUBES Re-caps Ideal for re-capping blood collection tubes «vacuum type». Suitable for other glass and plastic tubes. Manufactured in flexible polyethylene. Easy to cap and remove. code

description

case quantity

case weight

case volume

308502

Ø 12-13 mm natural colour

6 x 1,000

1.70

0.025

308506

Ø 12-13 mm red colour

6 x 1,000

2.18

0.025

308602

Ø 15,2-16 mm natural colour

6 x 1,000

3.31

0.025

308606

Ø 15,2-16 mm red colour

6 x 1,000

3.31

0.025

Other colours available on request, minimum order quantity is 6,000 units.

Universal reversible cap Precision molded from low density polyethylene. Designed to recap most tubes from 12 mm to 16 mm diameter. It protects from aerosols and guards sample against cross-contamination and laboratory areas against infection and spillage. Very sturdy under most rigorous procedures, including centrifugation. Simple and quick removal thanks to its fins. Non autoclavable. code

colour

case quantity

case weight

case volume

308702

natural

1,000

0.46

0.004

308705

blue

1,000

0.46

0.004

308706

red

1,000

0.46

0.004

NEW

tube

132

c (IVD)

15 ml conical tubes, sterile

Tubes made of transparent, copolymer polypropylene. Green caps made of polyethylene with an internal joint which ensures leakproofness. Tubes feature a solvent resistant white panel and black graduations for use both for clear or dark samples. DNAse, RNAse, endotoxins and metal free. They are sterile by radiation and withstand temperatures down to -90ºC. Resistance to centrifugation: 17,000 g. Autoclavable tube (the joint of the cap is not autoclavable). Two options available: - Supplied in bags of 50 units. Bags printed with instructions of use. - Supplied in fiber racks of 25 ml. Racks with holding grip, numbered grid and instructions printed on the base. Racks fold flat for storing (when empty) or recycling. Every case contains ten bags with two racks.

code

description

case quantity

case weight

case volume

409920

bag 50 units

10 x 50

4.12

0.032

rack 25 units

10 x (2x25)

4.12

0.032

New 409920R


7. TUBES AND MICROTUBES

c (IVD)

EUROTUBO® 15 ml conical tubes

Tubes made of transparent polypropylene, conical bottom, suitable for centrifugation tests in immunology, microbiology, etc. Continuous thread, external moulded graduations in 0,5 ml increments. Frosted area (55 x 10 mm). Blue cap in polyethylene with hermetical closure thanks to its internal elastic obturation. Code 429910 is autoclavable (121ºC) with the cap not being closed, just placed on the thread. Codes 429920 and 429946: autoclave not recommended, as they have been sterilised by radiation. Code 429920 is supplied sterile in 25 microns polyethylene bags (100 units). The bag specifies IVD, lot number, expiration date,… Code 429946 is supplied sterile in individual bags. Resistance: 5,000 g. Length (with cap): 120 mm. External mouth diameter: 17 mm. External cap diameter: 20,9 mm. case quantity

case weight

case volume

cases per pallet

non sterile

500

3.8

0.029

60

429920

STERILE

5 x 100

3.9

0.029

60

429946

STERILE individually bagged

500

3.9

0.038

54

code

description

429910

Please find racks for these tubes in Chapter 10. Sample Storage and Cryogenics. POLYPROPYLENE RACKS: s7-016 s7  s

METAL RACKS: s!-202 s!  s!  s! 

133


PP

7. TUBES AND MICROTUBES

mod. 3, 4

1

4 3 2

c (IVD)

EUROTUBO® 12 ml screw cap tubes, round bottom

Made of autoclavable (121ºC) transparent polypropylene or polystyrene. Green cap made of high density polyethylene. Dimensions: 15 x 102 mm. The external skirt allows the tubes to remain free-standing. Supplied screwed. The sterile model (ethylene oxide) is supplied individually in flow-pack bag, with indication of batch, expiration date, etc... according to the guidelines for sterile products. Resistance to centrifugation: PS: 7,500 g. PP: 15,000 g. Attention: For autoclaving, the cap should be loose on the thread and not tightly fitted.

E

mod.

301402 301403

3

401402

4

401403

volume recom. ml

case quantity

case weight

case volume

cases pallet

STERILE

14.4

12

6 x 250

13.00

0.096

20

14.4

12

6 x 250

12.00

0.082

24

polypropylene individually wrapped

14.2

12

6 x 250

11.80

0.096

20

121º C

high transparency polypropylene

14.2

12

6 x 250

11.00

0.082

24

121º C

polystyrene individually wrapped polystyrene

STERILE

B C

A

1

maximum volume ml

description

code

2

Dimensions (±0,09):

E

D

134

code

external cap Ø mm A

external tube Ø mm B

internal tube Ø mm C

length with cap mm D

length without cap mm E

301402, 301403

20.9

16.3

14.4

103.9

102.5

401402, 401403

20.9

16.2

14.3

102.9

101.5


7. TUBES AND MICROTUBES

c (IVD)

EUROTUBO® 50 ml conical tubes

Tubes made of transparent polypropylene, conical bottom, suitable for centrifugation tests in immunology, microbiology, etc. Perfect to analyse Koch bacillus. Continuous thread, external moulded graduations in 5 ml increments. Blue cap in high density polyethylene with hermetical closure thanks to its internal elastic obturation. Skirted and non skirted versions, sterilised by radiation and non sterilised versions. Sterile codes are either supplied in individual bags (codes 429926, 429927), in bags of 100 units (codes 429926.10, 429927.10), or in bags of 25 units (codes 429926.25, 429927.25) and resist up to 7,000 g. Autoclave not recommended as they have been ionised. Non sterile codes withstand up to 12,000 g and are autoclavable (121 ºC) with the cap loose on the thread and not tightly fitted. Every version is supplied capped, excepting code 429900SP, which is supplied uncapped, with the cap in a separated bag. description

external cap Ø mm

internal tube Ø mm

external tube Ø mm

length with cap mm

case quantity

case weight

case volume

cases per pallet

429900

non skirted

34.4

27.2

29.5

117.5

500

7.9

0.075

24

429900SP

non skirted, unscrewed cap

34.4

27.2

29.5

117.5

500

7.9

0.075

24 NEW

429901

skirted

34.4

27.2

29.5

117.5

500

8.5

0.082

24

code

429926

STERILE

non skirted, individually wrapped

34.4

27.2

29.5

117.5

500

8.2

0.082

24

429926.25

STERILE

non skirted, bag 25 units

34.4

27.2

29.5

117.5

20x25

8.2

0.082

24 NEW

429926.10

STERILE

non skirted, bag 100 units

34.4

27.2

29.5

117.5

5x100

7.9

0.082

24

429927

STERILE

skirted, individually wrapped

34.4

27.2

29.5

117.5

500

8.8

0.082

24

429927.25

STERILE

skirted, bag 25 units

34.4

27.2

29.5

117.5

20x25

8.8

0.082

24 NEW

429927.10

STERILE

skirted, bag 100 units

34.4

27.2

29.5

117.5

5x100

8.5

0.082

24

Please find racks for these tubes on Chapter 10. Sample Storage and Cryogenics. POLYPROPYLENE RACKS: s7  s s

METAL RACKS: s2 s2  s2 s2  s2 

135


136

7. TUBES AND MICROTUBES NEW

50 ml conical high resistance tubes. Sterile

c (IVD)

In transparent polypropylene whit ďŹ tted green polyethylene screw cap, featuring an internal elastic obturator. DNAse, RNAse, endotoxins and metal free. Black graduations every 5 ml and moulded mark at 50 ml, with white labelling area. Available skirted (freestanding) and non skirted. Dimensions: 29.6 x 114.6 mm.

Skirted tube can withstand centrifugation up to 10,000 g. Non skirted, up to 20,000 g. Sterile. In case autoclaving is necessary, cap should not be tightly screwed so air can pass through. Supplied capped in bags of 50 units. Bags are printed with instructions for use and feature a double closure: a ďŹ rst tamper evident seal that helps guaranteeing sterility, ANDASECONDARYZIP LOCK RESEALABLECLOSURE code

description

409922

non skirted skirted

New 409923

case quantity

case weight

case volume

10 x 50

8.16

0.079

10 x 50

8.80

0.079

See our cups on Chapter 3. Haematology and Biochemistry

Loose position for aerobic work

PosSealed position for anaerobic cultures

Sterile culture tubes in polystyrene Tubes supplied with either a two position ribbed polyethylene cap, which can be left loose for aerobic work or sealed for anaerobic cultures. They are biologically inert, exempt from mold release agents, and withstand up to 1,400 g and 70ÂşC. 0ACKAGEDINSELF STANDINGRESEALABLEZIP LOCKBAGSOFUNITS code

dimensions mm

case quantity

case weight

case volume

300807

12 x 75

8 x 125

4.33

0.033

300808

17 x 100

8 x 125

7.14

0.060


7. TUBES AND MICROTUBES 5 and 10 ml freestanding, round bottom tubes Freestanding tubes with screw caps. Conceived for sampling, transport and midterm storage. Feature molded graduations at 1ml increments and a large surface for labeling and identiďŹ cation. Round bottom tubes made of autoclavable polypropylene, leakproof caps made of polyethylene. Withstand temperatures between 122ÂşC and -80ÂşC (-40Âş as the lowest working temperature).

NEW

CertiďŹ ed to the IATA 95kPA standard for safe shipping of samples. description

case quantity

case weight

case volume

439905

5 ml PP thread tube

2 x 500

5.45

0.032

439910

10 ml PP thread tube

2 x 500

6.35

0.055

code

Isothermal bags Isothermal bags for the transport of biological samples, manufactured from PVC, PE and polyurethane (foam). Green colour. The isothermal bags have two functions: keeping the temperature of samples for 6 hours while being transported, whatever the climatic conditions; protecting the samples and their contents. Bags include the following elements: THREEDIFFERENTLOCKSBYVELCROEXCEPTINGLMODEL BYZIPFASTENERANDBYACODEDPADLOCKFORLMODELS - an inner pocket designed to hold the included cold packs, - a transparent outer pocket, at the front of the bag, for laboratory identiďŹ cation, - a transparent pocket, over the top of the bag, to insert documents.

See more information in Chapter 6. Sampling and Transport

code

dimensions mm

litres

quantity

weight

volume

900073

230x230x170

6

1

0.92

0.009

900074

220x220x260

10

1

1.20

0.013

900076

390x250x280

27

1

1.40

0.027

900078

450x300x300

40

1

1.54

0.041

Multifunction bag Manufactured in polyethylene (125 microns). Useful for transporting different kind of samples and documents. )THASAMETALZIPCLOSUREANDABLUESTRIPINTHETOP It can be used as many times as necessary. Long-lasting use.

code

description

case quantity

case weight

case volume

200338

bag 250 x 195 mm

100

2.00

0.007

See our wide range of bags in Chapter 6. Sampling and Transport

137


138

7. TUBES AND MICROTUBES GLASS TUBE RANGE The high quality of our range of disposable glass culture tubes and screw threaded tubes is reďŹ&#x201A;ected in the uniformity of their wallthickness, shape of their bottoms, close tolerances, well formed bottoms and well moulded screw-neck. All of our tubes are fully annealed at temperatures above 500 degrees Centigrade to eliminate contamination, reduce breakage and increase strength. The majority of our tubes are packaged in plain outer cases. Each tube is polished individually. Culture tubes: They are available in either borosilicate or soda lime glass. Both glasses differ primarily in their chemical composition and their chemical resistance. Borosilicate glass is a type of glass with a higher resistance to thermal shock. For this reason borosilicate glass is more suitable where the tubes will be heated or cooled rapidly with less chance of breakage. Soda lime glass is a more economical alternative and suits for most culture medium,bacteriological and laboratory applications where the tube will not be subjected to extreme temperature changes. Screw-neck tubes are ideal for tissue culture and general bacteriological work. Tubes are supplied with standard GPI ďŹ nishes. The screw â&#x20AC;&#x201C; neck vials are made of borosilicate glass and are basically used for diagnosis, pharmaceutics, chemicals, laboratory analysis, storage of liquids and powders. The caps presented are manufactured in autoclavable polypropylene with internal silicone joint. Different packagings are available, depending on the model of tube: Boxes: sturdy cardboard boxes. Each box contains small shrinkWRAPPEDCASES4UBESAREPRESENTEDHORIZONTALLY Trays: sturdy shrink-wrapped cardboard trays. Tubes are presented vertically.

Culture tube cap Made of polypropylene, autoclavable up to 121 ÂşC. Suitable with codes 916100, 816100, 916150, 816150 and 816160. Vented caps (with inner ďŹ&#x201A;ats). Recommended for glass tubes.

code

recommended for tubes Ă&#x2DC; mm

colour

case quantity

case weight

case volume

617402

16

natural

4 x 1,000

5.3

0.05


7. TUBES AND MICROTUBES

Round bottom glass tubes Made of borosilicate or soda glass. The high quality of those tubes is reflected in the uniformity of their wall thickness and of their diameter and height dimensions. Supplied in small quantities per case for a more convenient use in laboratory. code boro

code soda

total capacity ml

Ø int. mm tube

Ø ext. mm tube

height mm

thickness mm

case quantity

case weight

case volume

Supplied in boxes (1) 901075

801075

4

8.20

9.75

75

0.60

4 x 250

3.60

0.010

901275

801275

6

10.20

11.60

75

0.60

4 x 250

4.50

0.012

913100

813100

10

11.10

12.70

100

0.60

4 x 250

5.90

0.024

916100

816100

15

13.95

15.75

100

0.60

4 x 250

9.10

0.034

916150

816150

22

13.55

16.00

150

0.70

4 x 250

13.60

0.049

816160

27

14.40

16.00

160

0.55

500

5.50

0.018

818150

28

15.00

18.00

150

0.85

2 x 250

7.30

0.034

820150

34

17.20

20.00

150

0.85

100

1.92

0.006

820200

47

17.15

19.25

200

0.85

250

6.30

0.020

6

10.10

11.60

75

0.50

500

1.89

0.005

918150

Supplied in trays (2) 801175T

1 2

139


140

7. TUBES AND MICROTUBES

Screw threaded glass tubes Made of borosilicate or soda glass. The high quality of those screw threaded tubes is reflected in the uniformity of their wall thickness and of their diameter and height dimensions. Supplied in small quantities per case for a more convenient use in laboratory. Tubes are supplied without caps. To order caps see below. Polypropylene caps are designed for the round bottom tubes. Aluminium caps are designed for flat bottom tubes. code

total capacity ml

screw

Ø int. mm tube

Ø ext. mm tube

height mm

thickness mm

case quantity

case weight

case volume

suitable cap

Round bottom borosilicate tubes, supplied in boxes. 713100

5

13 - 415

10.65

12.75

100

1.00

4 x 250

10.90

0.022

617100

716100

11

15 - 415

14.00

16.00

100

1.05

4 x 250

13.60

0.034

617200

716125

14

15 - 415

14.00

16.00

125

1.05

4 x 250

15.90

0.042

617200

716150

18

15 - 415

14.00

16.00

150

1.05

4 x 250

19.10

0.049

617200

720150

34

18 - 415

17.70

20.00

150

1.15

4 x 125

11.80

0.036

617300

17.75

144.5

1.05

252

5.54

0.010

617000

Flat bottom soda glass tubes supplied in trays. 617145

24

15 - 415

14.20

Screw caps for the above tubes For round bottom borosilicate glass tubes, choose polypropylene caps (black colour). For flat bottom soda glass tubes, choose aluminium caps, with an internal joint. Pharmaceutical quality. Both models of caps are fully autoclavable.

code

type of cap

bag quantity

bag weight

bag volume

617000

aluminium

500

0.4

0.005

617100

polypropylene

1,000

0.9

0.001

617200

polypropylene

1,000

1.2

0.002

617300

polypropylene

500

1.1

0.003


7. TUBES AND MICROTUBES

A C

7

6

5

D

4

B

3

2

1

Flat bottom screw threaded vials Made of ultra clear borosilicate glass. Fully autoclavable. Supplied in trays individually shrink-wrapped. Thickness: 1 mm. Caps are supplied separately. To order caps see below. mod.

code

dimensions mm

volume ml

screw

tray quantity

tray weight

tray volume

suitable cap

1

900204

15 x 45

4

13-425

100

0.4

0.001

917000

2

900205

18 x 50

5

15-425

250

1.1

0.003

918000

3

900208

17 x 60

8

15-425

100

0.7

0.001

918000

4

900211

22 x 48

10

18-400

100

0.9

0.001

922000

5

900212

19 x 65

12

18-400

100

1.1

0.002

922000

6

900220

28 x 65

20

22-400

2 x 150

5.4

0.010

928000

7

900225

28 x 70

24

22-400

100

1.9

0.005

928000

Caps for the above vials: Made of autoclavable polypropylene. Black caps feature an internal silicone joint. letter

code

screw

bag quantity

bag weight

bag volume

A

917000

13-425

100

0.10

0.001

B

918000

15-425

250

0.18

0.001

C

922000

18-400

250

0.22

0.001

D

928000

22-400

300

0.28

0.001

Racks for containers up to 23 mm Ă&#x2DC; Made of stainless steel. 25 mm square holes. Features a strong woven mesh base. code

large x width x height mm

tubes capacity

quantity

weight

volume

D-200

265 x 265 x 85

100 (10 x 10)

1

0.425

0.0059

D-230

219 x 166 x 85

48 (8 x 6)

1

0.238

0.0030

D-240

165 x 110 x 85

24 (6 x 4)

1

0.145

0.0015

D-250

111 x 84 x 85

12 (4 x 3)

1

0.095

0.0008

See other racks for tubes in Chapter 10. Sample Storage and Cryogenics.

141


142

7. TUBES AND MICROTUBES 0.4 ml microtubes, BeckmanÂŽ type Manufactured in polyethylene. Dimensions: 5.50 x 47.50 mm (Ă&#x2DC; x h), capped. Withstand centrifugation up to 14,000 r.p.m and can be used at temperatures from â&#x20AC;&#x201C;10ÂşC to 130ÂşC. code

description

case quantity

case weight

case volume

900007

Beckman type microtube 0.4 ml

18 x 1,000

13.05

0.069

See our wide range of racks for microtubes in Chapter 10. Sample storage and Cryogenics

0.5 ml microtubes, VitatronÂŽ type Manufactured in polypropylene. Autoclavable. Graduated. Easy handling caps: they can be opened and closed with one hand. Will withstand centrifugation up to: 14,000 g. Dimensions: 7.87 x 31.8 mm (diameter x height) capped. code

description

case quantity

case weight

case volume

900118

Vitatron type microtube 0.5 ml

12 x 1,000

7.0

0.049

0.5 ml microtubes, VitatronÂŽ type Made of autoclavable polypropylene. Ideal for little sample volumes, microtechniques, microsedimentation... 3UITABLEFORTRANSPORT STORAGEANDFREEZINGOFBIOLOGICALSAMPLES Watertight closing system. Easy handling caps: they can be opened and closed with one hand. Easily pierceable. Will withstand centrifugation up to 11,000 g. The rim in the inner part of the cap assures an optimum watertightness. Resist temperatures from â&#x20AC;&#x201C;10 ÂşC to 130 ÂşC. Dimensions: 7,50 x 31,25 mm (Ă&#x2DC; x h) capped. code

description

case quantity

case weight

case volume

900117

VitatronÂŽ type microtube 0.5 ml

14 x 1,000

7.30

0.069


7. TUBES AND MICROTUBES 0.5 ml microtubes Made of ultra clear polypropylene. Autoclavable. Tubes have a frosted writing surface on side and on closure for better sample identification. Caps are easy to handle and can be opened and closed with one hand. Lids are easily pierceable. Tubes have moulded-in graduations in 100 ul increments from 0.1 to 0.6 ml. Withstand centrifugation up to 17,000 g. Dimensions: 30 x 8 mm. Can be used from –80ºC to 121ºC. RNAse, DNAse and PCR inhibitors free. Model 4092.1NS, with a low adhesion surface, is specially designed for research procedures such as protein work and nucleic acid amplifications. Made from special resins to minimise liquid retention and ensure optimum sample yield, thus eliminating the use of lubricants that may be harmful to samples. The proprietary formulation is completely non-reactive. code

description

case quantity

case weight

case volume

4092.1N

natural graduated

10 x 1.000

7.28

0.048

4092.1NS

low adherence natural graduated

10 x 500

3.64

0.027

Standard 1.5 ml microtubes Made of ultra clear polypropylene. Autoclavable. Attached flat caps. Tubes can be easily opened and closed with one hand. Ideal for THESTORAGEANDFREEZINGOFANYKINDOFBIOLOGICALMATERIALCELLS sperm, bacteria...). Can be used at temperatures down to –100ºC. Withstand centrifugation up to 14,000 rpm. code

dimensions Ø x h mm

colour

case quantity

case weight

case volume

200400

10.86 x 39.06

natural

5 x 1,000

5.40

0.049

200401

10.86 x 39.06

yellow

5 x 1,000

5.40

0.049

200405

10.86 x 39.06

blue

5 x 1,000

5.40

0.049

200407

10.86 x 39.06

green

5 x 1,000

5.40

0.049

200410

10.86 x 39.06

pink

5 x 1,000

5.40

0.049

1.5 ml microtubes Manufactured in polypropylene. Autoclavable. Easy opening and closing. Graduated tube. It features a frosted area for writing. Flat cap. Will withstand centrifugation up to: 12,500 g. code

dimensions Ø x h mm

case quantity

case weight

case volume

200400P

10.6 x 41.5

12 x 500

7.00

0.049

143


144

7. TUBES AND MICROTUBES 1.5 ml safety lock microtubes Made of ultra clear polypropylene. Feature a special â&#x20AC;&#x153;snap-sealâ&#x20AC;? secure lock. A special locking clasp with a distinctive audible snapseal design ensures tubes will not open during centrifugation. Tubes have a frosted writing surface on side and on attached closure for better sample identiďŹ cation. Caps are easy to handle and can be opened and closed with one hand. Lids are easily pierceable. Tubes have moulded-in graduations in 0.5 ml increments. Autoclavable. Can be used from â&#x20AC;&#x201C;90 ÂşC to 121 ÂşC. Withstand centrifugation up to 17,000 g. code

dimensions Ă&#x2DC; x h mm

case quantity

case weight

case volume

4092.5N

11 x 39

10 x 500

5.76

0.055

1.5 microtubes with secure lock pick-up tab. Same characteristics as code 4092.5N but these microtubes include a pick-up tab for easier handling without actually touching the tube. Pierceable cap. Withstand centrifugation up to 17,000 g. Autoclavable. Withstand temperatures from -175 ÂşC to 121 ÂşC. code

colour

case quantity

case weight

case volume

4091.1N

natural

10 x 500

4.94

0.045

1.5 ml graduated microtubes Made of ultra clear polypropylene. Autoclavable. Feature a frosted writing surface on side and on closure for better sample identiďŹ cation. Caps are easy to handle and can be opened and closed with one hand. Lids are easily pierceable. Can be used from â&#x20AC;&#x201C;80ÂşC to 121ÂşC. Dimensions: 39 x 11 mm. Caps specially designed to reduce popping when centrifugation, FREEZING BOILING STORINGORSHIPPINGISREQUIRED - when the objective is to avoid liquid remaining on the wall of the tube, just push the cap slightly and a little centrifugation time is required. - when centrifugation is required, push the cap ďŹ rmly to achieve complete closure. Tubes withstand centrifugation up to 13,000 g. code

colour

case quantity

case weight

case volume

4092.2N

natural

10 x 500

6.82

0.044

4092.2AM

yellow

10 x 500

6.82

0.044

4092.2V

green

10 x 500

6.82

0.044

4092.2A

blue

10 x 500

6.82

0.044


7. TUBES AND MICROTUBES 1.5 ml microtubes. DNASE, RNASE free Made of ultra clear polypropylene. Autoclavable. Attached flat caps. Graduated from 100 μl. Tubes can be easily opened and closed with one hand. Ideal for THESTORAGEANDFREEZINGOFANYKINDOFBIOLOGICALMATERIALCELLS sperm, bacteria...). Can be used at temperatures from –90 to 121ºC. Withstand centrifugation up to 20,000 g. DNAse, RNAse, DNA and PCR inhibitors free. Dimensions (Ø x h): 10.7 x 39.1 mm. code

description

case quantity

case weight

case volume

4092.3N

natural colour,

10 x 500

7.30

0.048

4092.3NS

natural colour, clear siliconised

10 x 250

4.09

0.030 New

2 ml microtubes with attached caps Made of ultra clear polypropylene. Autoclavable. Certified RNAse and DNAse free. Feature a frosted writing surface on side and on closure for better sample identification. Easy handling: tubes can be opened and closed with one hand. Lids are easily pierceable. Tubes have moulded-in graduations in 100 μl increments up to 2 ml. Dimensions: 11 x 40 mm. Can be used at temperatures from –90ºC up to 120ºC. Withstand centrifugation up to 17,000 g. Model 4092.6NS has a low adhesion surface for special applications such as protein work.

code

description

case quantity

case weight

case volume

4092.6N

natural colour,

10 x 500

7.27

0.048

4092.6NS

natural colour, clear siliconised

10 x 250

4.09

0.030

2 ml. graduated microtube Microtubes made of ultra clear polypropylene. Autoclavable. 2 ml graduated tubes with frosted area for writing. Flat cap that features a secure lock with safety shield. Easy handling with just one hand. They can be used at temperatures from -20°C up to 121°C. Withstand centrifugation up to 12,000g. code

dimensions Ø x h mm

case quantity

case weight

case volume

4092.7N

10.3 x 40.5

10 x 500

6.50

0.055

145


146

7. TUBES AND MICROTUBES Screw thread microtubes Made of autoclavable polypropylene, they can be used at extreme temperatures from -190 º C to +121º C. Two versions available: in transparent polypropylene, or opaque brown (designed to be used with light sensitive samples). Certified RNAse, DNAse and Pyrogen free. Tubes and caps can be centrifuged at 17,000 g. Caps are supplied separately, see below. Dimensions: 11 x 44 mm. mod.

4

2

volume ml

skirt

case quantity

case weight

case volume

0.009

Transparent polypropylene

7

3

code

8

1

409110.1

0.5

yes

1,000

1.34

2

409110.2

1.5

yes

1,000

1.34

0.009

3

409110.3

1.5

no

1,000

1.34

0.009

4

409110.4

2.0

yes

1,000

1.34

0.009 0.009

Brown polypropylene

1

5

6

5

409113.1

0.5

yes

1,000

1.34

6

409113.2

1.5

yes

1,000

1.34

0.009

7

409113.3

1.5

no

1,000

1.34

0.009

8

409113.4

2

yes

1,000

1.34

0.009

Caps for the above tubes 4

Made of polypropylene. Natural or opaque brown colour (codes 409007.M and 409008.M, recommended for brown microtubes. Caps are available either with an attachment loop or without loop. Both models have a sealing O-ring (red) of silicone to ensure a positive leakproof seal. For sample identification, colour coding inserts can be placed upon caps (made of polypropylene). Cap dimensions: 13 x 8 mm.

2

3 1

mod.

7

5

6

8

code

description

case quantity

case weight

case volume

1

409007.N

cap with loop

1,000

0.40

0.003

2

409008.N

cap without loop

1,000

0.40

0.003

3

409007.M

brown cap with loop

1,000

0.40

0.003

4

409008.M

brown cap without loop

1,000

0.40

0.003

5

409111A

blue insert

500

0.58

0.003

6

409111AM

yellow insert

500

0.58

0.003

7

409111B

white insert

500

0.58

0.003

8

409111R

red insert

500

0.58

0.003

Self standing, screw thread tamper evident microtubes

Internal obturating ring Silicone O-Ring Gripped for a better handling Tamper evident ring

1

2

3

Microtubes and caps are made of autoclavable ultra clear polypropylene. Ribbed cap with internal silicone O-ring for a positive leakproof seal. Super fast ¼ turn thread design. Tamper evident seal which notices if microtube has been opened. Rnase, Dnase and Pyrogen free. They can be used at extreme temperatures from –196º to +121ºC. Resistance to centrifugation: 17,000 g. Microtube dimensions: 11 x 44 mm. Cap dimensions (with tamper-evident ring): 15 x 9 mm. Used on: s 4ESTOFFERTILITYAND$.!TESTING s 0ACKAGINGOFDIAGNOSTICKITSANDREAGENTS s #RIME,ABORATORIES mod.

code

volume ml

case quantity

case weight

case volume

1

409110.1T

0.5

1,000

2.06

0.013

2

409110.2T

1.5

1,000

2.06

0.013

3

409110.4T

2

1,000

2.06

0.013


7. TUBES AND MICROTUBES Screw thread microtubes Made of transparent polypropylene. Suitable for use in liquid nitrogen, autoclave and for boiling applications, and can be used at temperatures down to â&#x20AC;&#x201C;190 ÂşC. CertiďŹ ed RNAse, DNAse and Pyrogen free. Products ideal for long term sample storage. Withstand centrifugation at 20,000 g. The codes 409111/4 and 409111/6, with external moulded slots for better handling with gloves. Dimensions: 10,3 x 44,5 mm (except code 409111/2: 10,3 x 43,6 mm)

mod.

code

description

graduation

case quantity

case weight

case volume

°

500

0.70

0.002

500

0.60

0.002

500

0.60

0.002 New

500

0.60

0.002

500

0.60

0.002

500

0.60

0.002 New

1

409111/4

0,5 ml skirted

2

409111/2

1.5 ml

3

409111/5

1.5 ml skirted

4

409111/3

2.0 ml

5

409111/6

2.0 ml skirted

6

409111/7

2.0 ml skirted

3 °

3 °

3

1

2

3

Caps for the above tubes with o-ring Made of polypropylene of medical degree. Feature an internal O-ring to ensure leakproof seal. Dimensions 13.0 x 6.0 mm. CertiďŹ ed RNAse, DNAse and Pyrogen free.

4

code

colour

case quantity

case weight

case volume

409112/0

natural

500

0.024

0.0001

409112/1

blue

500

0.024

0.0001

409112/2

green

500

0.024

0.0001

409112/4

red

500

0.024

0.0001

409112/6

yellow

500

0.024

0.0001

Screw cap microtubes, with cap. Sterile Tubes and caps in medical grade, transparent polypropylene. The cap embodies a non-reactive ethylene-propylene joint. 3UITABLEFORAUTOCLAVE LIQUIDNITROGENGAZ ANDBOILINGPROCESSES Perfect for long term storage. Withstand temperatures from -190 Âş C. Centrifugation Resistance: 20,000 g. DNAse, RNAse, DNA, PCR inhibitors and Pyrogen free. Graduated models feature a frosted area for writing. The non-graduated model incorporates an external grip for an easy handling. Microtubes are supplied capped, in bags of 50 units. code

409115/4

description 0.5 ml skirted

STERILE

409115/2 1.5 ml non skirted

STERILE

409115/6

2 ml skirted

STERILE

409115/3

2 ml non skirted

STERILE

graduation

case quantity

case weight

case volume

°

50 x 50

5.89

0.029

50 x 50

5.89

0.029

50 x 50

5.89

0.029

50 x 50

5.89

0.029

3 3 3

NEW

5

6

147


148

7. TUBES AND MICROTUBES Sterile cryovials Tubes made of autoclavable polypropylene. Designed for the storage of biological material at temperatures as low as -196 ÂşC. (Liquid Nitrogen but in gas state). Cryovials have printed graduations and feature a white marking area for sample identiďŹ cation. Caps and tubes have both the same coefďŹ cient of expansion, which further enhances their leakproof qualities at changing temperatures. Caps are manufactured in polyethylene* and embody a silicone o-ring that guarantees leakproof. Colour code inserts can be ďŹ tted into the caps for identiďŹ cation. All cryovials are certiďŹ ed RNAse, DNAse and pyrogen free. #RYOVIALSARESTERILIZEDBYRADIATIONANDAREPACKAGEDINSAFETY LOCK bags of 100. Supplied capped. External threads: MINIMIZE LIQUID RETENTION .ON SKIRTED VERSIONS WITHSTAND centrifugation up to 17,000 g. * 10 ml cryovial (code 401410) features a polyethylene cap which does not accept inserts.

NEW

Internal threads: Non skirted versions withstand centrifugation up to 14,000 g. Cryovials with external threads: code

volume ml

skirt

dimensions mm*

case quantity

case weight

case volume

409105.1

1.2

yes

12.5 x 42

10 x 100

2.55

0.014

409103.1

2.0

no

12.5 x 47

10 x 100

2.64

0.014

409106.1

2.0

yes

12.5 x 49

10 x 100

2.64

0.014

409107

3.0

yes

12.5 x 71

10 x 100

3.79

0.021

409108

4.0

yes

12.5 x 77

10 x 100

3.90

0.028

409109

5.0

yes

12.5 x 92

10 x 100

4.58

0.028

New 401410

10.0

yes

17.0 x 84

10 x 50

2.80

0.020

case quantity

case weight

case volume

* Capped Cryovials with internal threads: dimensions mm*

code

volume ml

skirt

409001

1.2

yes

12.5 x 41

10 x 100

2.55

0.014

409002

2.0

no

12.5 x 48

10 x 100

2.64

0.014

409002.1

2.0

yes

12.5 x 49

10 x 100

2.64

0.014

409003

4.0

no

12.5 x 70

10 x 100

3.79

0.024

409003.1

4.0

yes

12.5 x 72

10 x 100

3.90

0.024

409003.2

5.0

no

12.5 x 90

10 x 100

4.58

0.024

* Capped

Colour coded inserts

Find it in page 216

Made of polypropylene. Very convenient for colour identiďŹ cation INFREEZERS ONBENCHTOPSETC&ITPRECISELYINTOTHECAPSOFCRYOVIALS They feature a little hole in order to help removing them from the cap. Not suitable for code 401410. code

colour

case quantity

case weight

case volume

409003A

blue

500

0.10

0.010

409003AM

yellow

500

0.10

0.010

409003R

red

500

0.10

0.010

409003V

green

500

0.10

0.010


7. TUBES AND MICROTUBES Non sterile cryovials with external threads Made of polypropylene. Designed for the storage and transportation of biological material. The external thread design provides a smooth and uniform inner surface, thus reducing the risk of contamination. Tubes can be autoclaved to 121Âş C and withstand temperatures down to â&#x20AC;&#x201C;190ÂşC. The closures and tubes are both manufactured of polypropylene having the same coefďŹ cient of expansion, which further enhances their leakproof qualities at changing temperatures. Cryovials withstand centrifugation up to 17,000 g. Skirted tubes are not recommended for centrifugation. Available with or without graduation and white band. Caps suitable for these cryovials are supplied separately, see code 409110 and series. Cryovials printed without graduation: code

volume ml

skirt

dimensions mm*

case quantity

case weight

case volume

409102.1

1.2

yes

12.5 x 43

1,000

2.48

0.010

409104.1

2.0

no

12.5 x 48

1,000

2.57

0.010

409106.2

2.0

yes

12.5 x 49

1,000

2.68

0.010

409107.1

3.0

yes

12.5 x 72

1,000

3.77

0.020

409108.1

4.0

yes

12.5 x 76

1,000

3.82

0.020

409109.1

5.0

yes

12.5 x 93

1,000

4.46

0.020

* Capped Cryovials with graduation and band: code

volume ml

skirt

dimensions mm*

case quantity

case weight

case volume

409132

2.0

yes

12.5 x 49

1,000

2.68

0.010

409133

3.0

yes

12.5 x 72

1,000

3.77

0.010

409134

4.0

no

12.5 x 75

1,000

3.82

0.020

409135

4.0

yes

12.5 x 76

1,000

3.90

0.020

* Capped

Caps for the above tubes Made of polypropylene. Feature a long skirt and a special thread design allowing them to be removed or sealed with a single turn and assuring a better protection of the content. A silicone washer ensures a positive leakproof seal at all temperatures. Caps are made of polypropylene having the same coefďŹ cient of expansion as the above cryovials. See the previous page for colour inserts to ďŹ t into these caps. code

colour

case quantity

case weight

case volume

409110

natural

1,000

0.082

0.001

409110/1

blue

1,000

0.082

0.001

409110/4

red

1,000

0.802

0.001

Canes for cryovials Made of aluminium. Suitable for the storage of ďŹ ve or six 1.2 or 2.0 ml tubes in liquid NITROGENFREEZERSSUCHAS$EWARmASKS code

dimensions

case quantity

case weight

case volume

409120

290 mm

12

0.20

0.0001

149


150

8. SAMPLE CONTAINERS


8. SAMPLE CONTAINERS

151


152

8. SAMPLE CONTAINERS

1

2

3

4

c (IVD)

30 ml universal polystyrene containers (25 x 90 mm)

Polypropylene caps. 30 ml containers. These containers are manufactured with an innovative process resulting in one of the most resistant containers available on the market. The standard cap colour is white, except 309602E (blue). Other colours can be supplied (ask for quantities). The minimum order quantity for labelled containers is 30,000 units. mod.

code

description

sterile

case quantity

case weight

case volume

cases pallet

1

309202

polystyrene

no

400

5.50

0.038

56

3

309222

polystyrene individually wrapped

no

400

5.70

0.046

40

3

309222.O

polystyrene individually wrapped

ETHYLENE-OXIDE

400

5.70

0.046

40

New 2

309222.1

polystyrene printed label individually wrapped

no

400

5.70

0.046

40

309201

polystyrene labelled

no

400

5.50

0.038

56

4

309602E

polystyrene with spoon, labelled

no

400

6.00

0.038

56

New

309602

polystyrene with spoon

no

400

6.00

0. 039

56

B

Dimensions: A 25.1 mm; B 30.8 mm; C 92.5 mm. Maximum volume 31.7 ml. Recommended volume 25 ml. Withstand centrifugation up to: 7,000 g. C

A

In an ASEPTIC PRODUCTION, manufacturing and packaging methods and environment are maintained to avoid or significantly reduce bacterial contamination (bioburden). Our EUROTUBO® containers are injected at a temperature of 250 ºC and are automatically connected to the assembling and packaging processes, without manual intervention, so as to guarantee an aseptic production.


8. SAMPLE CONTAINERS

1

2

3

4

c (IVD)

30 ml universal polypropylene containers (25 x 90 mm)

Made in Polypropylene. 30 ml containers. These containers are manufactured with an innovative process resulting in one of the most resistant containers available on the market. The screw closure can assure an almost leakproof closing system. Polypropylene cap in white colour, except 409602 (blue). Other colours can be supplied (ask for quantities). Autoclavable (except the code 409602, the polystyrene spatula must be removed before autoclaving). The minimum order quantity for labelled containers is 30,000 units. mod.

code

description

sterile

case quantity

case weight

case volume

cases pallet

1

409202

polypropylene

no

400

4.90

0.038

56

3

409222

polypropylene individually wrapped

no

400

5.10

0.046

40

2

409201

polypropylene printed label

no

400

4.90

0.038

56

4

409602

polypropylene with PS spoon

no

400

5.30

0.038

56

3

409222.O

polypropylene individually wrapped

ETHYLENE-OXIDE

400

5.10

0.046

40

New

409602E

polypropylene with PS spoon, labelled

no

400

5.50

0.038

56

B

Dimensions: A 24.8 mm; B 30.8 mm; C 91.6 mm. Maximum volume 31.1 ml. Recommended volume 25 ml. Withstand centrifugation up to: 10.000 g. C

A

30 ml container with boric acid (25 x 90 mm) This container includes a boric acid preservative which allows the storage and transport of the urine sample to the laboratory. The boric acid supports the viability of the bacteria while preventing further multiplication. This preservative does not alter the characteristics of the urine and will not affect analysis. The bacteria remain viable for 24-48 hours or more, depending on the type of microorganisms. Boric acid quantity: 0.4 gr. Sterile by ethylene oxide. code

description

case quantity

case weight

case volume

cases pallet

409202.B

polypropylene with boric acid

400

5.70

0.038

56

153


154

8. SAMPLE CONTAINERS

c (IVD)

50 ml containers (38 x 70 mm) With polyethylene caps. Volume: 50 ml. code

description

case quantity

case weight

case volume

cases pallet

409802

ultra clear polypropylene

1,000

12.50

0.140

16

409852

ultra clear polypropylene with PS spoon

1,000

13.30

0.140

16

409826

ultra clear polypropylene individually wrapped

900

12.50

0.140

16

B

C

Dimensions: A 35.1 mm; B 41.5 mm; C 72.3 mm. Maximum volume 56 ml. Recommended volume 45 ml.

A

c (IVD)

40 ml containers (30 x 70 mm) With polyethylene caps. Graduated. Volume 40 ml. code

description

case quantity

case weight

case volume

cases pallet

409402

ultra clear polypropylene

8 x 100

8.50

0.096

20

409426

ultra clear polypropylene, individually wrapped

800

10.50

0.110

16

309402

polystyrene

8 x 100

11.00

0.096

20

Dimensions: A 29.1 mm; B 35.7 mm, C 69.8 mm. Maximum volume 39 mm. Recommended volume: 30 ml.


8. SAMPLE CONTAINERS

The

seal

ring

will

be

automatically broken when unscrewing

c (IVD)

50 ml tamper evident containers (38 x70 mm) Ultra clear polypropylene containers with a specially designed tamper evident ring. Polyethylene caps. Standard colour of caps: red. Volume: 50 ml. description

case quantity

case weight

case volume

cases pallet

419802

ultra clear polypropylene

1,000

13.80

0.140

16

419826

ultra clear polypropylene individually wrapped

900

12.80

0.140

12

code

Containers are supplied capped but not fully locked so that the container is not fully sealed. Once samples (urine, milk, water...) are collected, screw the cap in a normal way and then screw again to fully position the tamper evident ring. B

C

A

Dimensions: A 35.1 mm; B 41.5 mm; C 72.3 mm. Maximum volume 56 ml. Recommended volume 45 ml.

155


156

8. SAMPLE CONTAINERS

c (IVD)

60 ml polystyrene containers (38 x 65 mm) New generation of 60 ml containers with high safety closure biďŹ&#x201A;ex caps. Caps made of polyethylene. Standard colour of the cap: red.

New

sterile

case quantity

code

description

309501

labelled polystyrene

no

600

309502

polystyrene

no

600

case weight

case volume

cases pallet

9.20

0.082

24

9.10

0.082

24

309552

polystyrene with spoon

no

600

9.30

0.082

24

309526

polystyrene individually wrapped

STERILE A

850

12.70

0.140

16

polystyrene individually wrapped, labelled

STERILE A

850

13.20

0.140

16

New 309526.8

Dimensions: A 39.3 mm; B 44.2 mm; C 66.0 mm. Maximum volume 63 ml. Recommended volume 50 ml.

B

C

We can supply these containers labeled. Please ask quantities. We can supply these containers sterilised by radiation.

A

Racks for containers up to 47 mm Ă&#x2DC; Stainless steel. 50 mm square holes. With a strong woven mesh base. code

dimensions mm

distribution quantity

I-240

315 x 210 x 45

24 (6 x 4)

I-250

210 x 160 x 45

12 (4 x 3)

weight

volume

1

0.325

0.0029

1

0.192

0.0015

Wide range of racks and baskets, see chapter 10.


8. SAMPLE CONTAINERS

Ask for our new versions with formaldehyde

c (IVD)

60 ml polypropylene containers (38 x 65 mm) New generation of 60 ml sterile containers with high safety closure biďŹ&#x201A;ex caps. Specially designed for pneumatic transport of specimens. Caps made of polyethylene. Standard colour of the cap: red. sterile

case quantity

case weight

case volume

cases pallet

code

description

409501

polypropylene labelled

no

600

9.30

0.082

24

409502

polypropylene

no

600

7.80

0.082

24

409552

polypropylene with spoon

no

600

8.40

0.082

24

409526

polypropylene individually wrapped

STERILE A

850

11.30

0.140

16

409526.O

polypropylene individually wrapped

ETHYLENE-OXIDE

850

11.30

0.140

16

409526.1

polypropylene individually wrapped, labelled

STERILE A

850

11.50

0.140

16

Dimensions: A 38.8 mm; B 44.2 mm; C 66.1 mm. Maximum volume 62 ml. Recommended volume 50 ml.

B

We can supply these containers sterilised by radiation. C

A

Graduated 60 ml containers 38 x 65 mm c (IVD) Made of transparent popypropylene. Moulded graduation in 5 ml increments. Red polyethylene cap, biďŹ&#x201A;ex. For other cap colours ask the minimum order quantities. Ideal for pneumatic transport because it has a watertight closing system. Supplied capped. description

sterile

case quantity

case weight

case volume

cases pallet

409502G

polypropylene

no

600

7.80

0.082

24

409526G

polypropylene, individually wrapped

STERILE A

850

11.30

0.140

16

code

Dimensions: A 38.8 mm; B 44.2 mm; C 66.1 mm. Maximum volume: 62 ml. Recommended volume: 50 ml.

New

157


158

8. SAMPLE CONTAINERS

c (IVD)

125 ml containers (57 x 73 mm) with spoon Ultra clear polypropylene containers with polyethylene leak proof screw caps. Spatula made of Polystyrene. Graduated in 100 ml increments. Frosted panel on side for easy writing. Standard colour of the cap: red. code

description

sterile

case quantity

case weight

case volume

cases pallet

409752

polypropylene with PS spoon

no

475

8.20

0.140

16

409756

polypropylene individually wrapped with PS spoon

no

400

7.70

0.140

16

409756.B

polypropylene individually wrapped with PS spoon

RADIATION

400

7.70

0.140

16

Dimensions: A 56.3 mm; B 62.1 mm; C 74.3 mm. Maximum volume 138 ml. Recommended volume 110 ml. These containers can be supplied sterilized by radiation.

B

C

A

B

C

A

Dimensions: A 58 mm; B 62 mm; C 69 mm.

125 ml screw cap containers (58 x 69 mm)

1 2

Manufactured in polystyrene or polypropylene depending on the model. Cap manufactured in polyethylene. Total volume 160 ml. Code 309752 is supplied with a polystyrene spoon inside. Code 409700 is sterile by radiation. mod.

code

description

sterile

case quantity

case weight

case volume

1

309752

polystyrene white cap and spoon

no

360

13.45

0.108

2

409700

polypropylene red cap

RADIATION

360

11.58

0.108


8. SAMPLE CONTAINERS

c (IVD)

125 ml containers (57 x 73 mm) Ultra clear polypropylene containers with polyethylene leak proof screw caps. Moulded graduation in 20 ml increments up to 100 ml. Frosted panel on side for easy writing. Standard colour of the cap: red. code

description

sterile

case quantity

case weight

case volume

cases pallet

409701

polypropylene labelled

no

475

8.10

0.140

16

409702

polypropylene

no

475

8.00

0.140

16

409726

polypropylene individually wrapped

STERILE A

400

7.60

0.140

16

409726.G

polypropylene individually wrapped

RADIATION

400

7.60

0.140

16

409746.S

polypropylene individually wrapped, labelled

STERILE A

400

7.75

0.140

16

B

C

Dimensions: A 56,3 mm; B 62,1 mm; C 74,3 mm. Maximum volume 148 ml. Recommended volume 110 ml.

A

125 ml containers uncapped (57 x 73)

c (IVD)

With the same characteristics as the previous model, but these containers are supplied uncapped. Containers and caps are supplied in the same box. code

description

case quantity

case weight

case volume

cases pallet

409703

polypropylene uncapped

620

10.50

0.082

24

New

159


160

8. SAMPLE CONTAINERS c (IVD)

Blue containers (60 and 125 ml)

With the same characteristics as codes 409702 (p. 159) and 409502 (p. 157) but in blue colour (containers and cap). Ideal for photosensitive samples or when it is required not to show the content. Ask for other labeling or for not labeled containers to our commercial department. Minimum order quantity: 30,000 units. description

code

60 ml container white label 150 ml container white label

409511 409711

case quantity

case weight

case volume

cases pallet

600

8.00

0.082

24

475

8.20

0.140

16

200 ml graduated container (57 x 116)

c (IVD)

Containers made of ultra clear polypropylene and caps made of polyethylene. Those containers have double moulded-in graduations, (in 20 ml increments up to 200 ml and in 1 oz increments up to 7 oz), and feature a frosted panel on their side for easy writing. Standard colour of caps: red. code

max. capacity

case quantity

case weight

case volume

cases pallet

409902

240 ml

275

7.10

0.140

16

Dimensions: A 56.5 mm; B 62.2 mm; C 115.5 mm; Maximum volume 240 ml; Recommended volume 210 ml.

B

C

A

200 ml screw cap container (58 x 95 mm) Manufactured in polystyrene, cap made of white polyethylene. Total volume: 220 ml.

code

max. capacity

case quantity

case weight

case volume

cases pallet

309903

220 ml

240

9.6

0.108

16

Dimensions: A 58 mm; B 62 mm; C 95 mm; D 22 mm.

B D

C

A


8. SAMPLE CONTAINERS Ø 62,1 mm

NEW

74,3 mm

Ø 19,5 mm

Ø 17,7 mm Ø 56,3 mm

c (IVD)

120 ml screw cap container (57 x 73 mm) Designed to use with vacuum tubes. Manufactured in transparent Polypropylene. It allows a clean transfer of the urine from the container to the vacuum tube.

Leakproof cap made of yellow polyethylene, with an internal obturating ring. It includes a cannula with a needle inside protected by a rubber cap and a plastic suction nozzle. The cap features a label that seals the cannula in order to prevent contact with the collection needle. The container features a wide marking area for sample identification and a graduation that helps to quantify the sample when uncapped. Once capped, the graduation is inaccurate as the volume is altered by the cannula. Maximum volume with cap: 120 ml, recommended volume: 60 ml. Presented in sterile and non sterile version, supplied in bulk or bag unit.

presentation

code

sterile

case quantity

case weight

case volume

cases pallet

Container 408702

in bulk

no

475

8.26

0.14

16

408726

individually wrapped

no

350

6.65

0.14

16

408702.G

in bulk

RADIATION

250

5.05

0.08

24

408726.G

individually wrapped

RADIATION

350

6.65

0.14

16

408720

individually wrapped, plain tube

RADIATION

250

8.19

0.10

20

408721

individually wrapped, tube with boric acid

RADIATION

250

8.21

0.10

20

Container and vacuum tube

Process of sample transfer: 1

2

3

4

5

1. Remove the cap label . 2. Place evacuated tube into cavity on cap, stopper down. 3. Advance the tube over puncture point to pierce stopper. The urine tube will be filled. Repeat if another tube is to be collected. 4. Hold tube in position until filled and remove tube from device. 5. Replace label over hole and reseal. This is a completely hygienic and safe system. It prevents sample loss and avoid the contamination of the sample, the user or the work environment.

161


162

8. SAMPLE CONTAINERS c (IVD)

Urine container set

Urine collection system designed to save space in the lab, and to be used when urine samples need to be collected into tubes for a subsequent centrifugation. Designed to be user friendly. The patient urinates in the 150 ml plastic cup and then pours the urine into the tube. Once the tube is ďŹ lled up, the patient caps it and delivers the sample to the lab, where the health assistant will ďŹ ll in the label with the required data. The patient just has to follow the hospital or laboratory instructions. Manufactured under aseptic conditions. There are several versions and custom-designed versions can be manufactured.

Easy pouring

New bag with instructions in spanish, catalan, euskera and galician.

We can manufacture sets with boric acid.

Components of each set: code

case quantity

case weight

case volume

309324.E3

300

4.50

0.140

Uncapped tube.

+

+

+ natural

Cup PS 150 ml

Bag with printed Instructions for use

400705 PP tube 10 ml 16 x 100 mm round bottom

308102 Cap with internal chamber

code

case quantity

case weight

case volume

309316.E

300

4.50

0.140

Uncapped and unlabelled tube.

+

+

+

+ green

Bag with printed Instructions for use

Cup PS 150 ml

308107 Cap with internal chamber

400705 PP tube 10 ml 16 x 100 mm round bottom

Label 25 x 35 mm

code

case quantity

case weight

case volume

309316

300

4.50

0.140

Capped and labelled.

+

+

+

+ green

Bag with printed Instructions for use

Cup PS 150 ml

400705 PP tube 10 ml 16 x 100 mm round bottom

308107 Cap with internal chamber

Label 25 x 35 mm


8. SAMPLE CONTAINERS code

case quantity

case weight

case volume

309324.E

300

4.70

0.140

Uncapped and unlabelled tube.

+

+

+

+ natural

Bag with printed Instructions for use

Cup PS 150 ml

401204 PP tube 10 ml 16 x 100 mm conical bottom

308202 Cap with internal chamber

Label 25 x 35 mm

code

case quantity

case weight

case volume

309324

300

4.70

0.140

Capped and labelled tube.

+

+

+

+ green

Bag with printed Instructions for use

Cup PS 150 ml

401204 PP tube 10 ml 16 x 100 mm conical bottom

308107 Cap with internal chamber

Label 25 x 35 mm

code

case quantity

case weight

case volume

309318

300

4.70

0.140

Capped and labelled tube.

+

+

+

+

yellow Bag with printed Instructions for use

Cup PS 150 ml

301212 PS tube 10 ml 17 x 105 mm conical bottom

306601 Lifting cap

Label 25 x 35 mm

Disposable cups Disposable sample cups, for general sample collection. Cups are supplied stacked. code

volume ml

202248

100

202317

150

mouth Ă&#x2DC; x height

case quantity

case weight

case volume

polypropylene 57.5 x 62

50 x 100

9.99

0.081

30 x 100

8.32

0.080

material

polystyrene

70 x 70

163


164

8. SAMPLE CONTAINERS cap and container shown after sealing

secondary seal primary seal

1

2

3

4

5

6

c (IVD)

Security screw cap containers

Ultra clear polypropylene containers with yellow polyethylene cap. They have moulded graduations in ml. Supplied uncapped with the caps and containers in the same box. Ideal for the pneumatic transport of liquid samples, including those that have phormaline, because they have a watertight closure. The cap, with an innovative inner shape, has a double closure. (see the figure). The base and the cap are ribbed so the handling with gloves is comfortable and reliable. There is a ring in the upper part of the body, in order to avoid the dripping in case of liquid decanting. For other cap colours (blue, orange, magenta), ask for the minimum order quantities.

mod.

code

grad. volume ml.

total volume ml

mouth Ø mm

height mm

case quantity

case weight

case volume

1

202840

20

26

34

43

1,000

7.20

0.102

2

202841

40

50

45

43

600

8.75

0.105

3

202842

60

76

45

60

500

8.20

0.105

4

202843

80

92

45

75

400

7.80

0.105

5

202848

90

108

53

68

300

6.35

0.105

6

202844

120

146

53

78

300

7.70

0.105

EUROTUBO® Leak proof screw cap containers

c (IVD)

Specially designed for histology, they are provided with double internal security closure. Manufactured in translucent polypropylene with polyethylene ribbed yellow cap. They have moulded graduations. Their leakproof closure makes them ideal for liquid or solid sample storage. They meet the standard UNE-EN 14401:2005 Rigid plastic containers. Methods to test the efectiveness of closures. Supplied uncapped.

Find more information about this product in pag. 87.


8. SAMPLE CONTAINERS

Ø 70 mm

165

Ø 86 mm

c (IVD)

Cylindrical container graduated up to 2 litres with handle

High density polyethylene container and cap. Ideal for 24 hour urine collection and any other liquid samples. We recommend references with white and ribbed cap, that features a pharmaceutical grade joint, which eliminates the need for an insert plug, allows a better handling and provides a watertight seal. Containers are graduated in 50 ml increments up to 2 l. Include a convenient handle for an easy single-handed use. Base diameter: 108 mm. Height, cap included: 290 mm. Cases per palet: 16. Code 408001.1 is individually wrapped by retractile system. Ask for other versions cap colours, capped containers and sterile containers. code

body colour

cap description

presentation

individually wrapped

sterile

internal case quantity mouth Ø mm

case weight

case volume

408001

natural

white, with joint

unscrewed

no

no

65

34

7.00

0.140

408001.O

natural

white, with joint

screwed

yes

RADIATION

65

34

7.00

0.140

408001-86

natural

black + plug

unscrewed

no

no

86

33

7.00

0.140

408001OBT

natural

black + plug

unscrewed

no

no

66.5

33

7.00

0.140

408001O/T

natural

black + plug

screwed

no

no

66.5

33

7.00

0.140

408001.1

natural

white, with joint

screwed

yes

no

65

34

7.00

0.140

408001O.2

brown

black + plug

unscrewed

no

no

66.5

33

7.00

0.140 NEW


166

8. SAMPLE CONTAINERS

c (IVD)

Rectangular containers, graduated up to 2 litres

Containers and caps made of high density polyethylene. Ideal for 24 hour urine collection and other liquid samples. Containers are in transluscent colours and moulded graduation in 50 ml increments up to 2 l. Ergonomically designed for single-handed use with a lateral tap of 66 mm length Height, cap included: 253 mm. Base: 84 x 125 mm. Cases per pallet: 16. We recommend models with white cap, because the cap features a pharmaceutical grade joint, which eliminates the need of a plug, allows a better handling and provides a leakproof closure. Individually wrapped models are supplied capped. Ask for other versions: colour (both, cap or body), and sterile containers. code

body colour

cap description

presentation

individually wrapped

sterile

internal case quantity mouth Ă&#x2DC; mm

case weight

case volume

407001

natural

white, with joint

unscrewed

no

no

67.8

43

6.00

0.140

407001/T

natural

white, with joint

screwed

no

no

67.8

43

6.90

0.140

407008

natural

white, with joint

screwed

yes

no

67.8

43

6.90

0.140

407008.O

natural

white, with joint

screwed

yes

RADIATION

67.8

43

6.90

0.140

407001OBT

natural

black + plug

unscrewed

no

no

67.8

41

6.70

0.140

407001O/T

natural

black + plug

screwed

no

no

67.8

41

6.70

0.140

407008OBT

natural

black + plug

screwed

yes

no

67.8

41

6.40

0.140

407003

brown

white, with joint

unscrewed

no

no

67.8

43

6.00

0.140


8. SAMPLE CONTAINERS

c (IVD)

Squared containers, graduated up to 2.7 litres

High density polyethylene container and cap. Ideal for 24 hour urine collection and other liquid samples. The ribbed cap features a pharmaceutical grade joint, which eliminates the need for an insert plug, allows a better handling and provides a watertight seal. Containers are graduated in 50 ml increments up to 2.7 l. Ergonomically designed for single-handed use. Stackable. A ring on the neck of the containers avoids dripping when pouring. Base: 115 x 115 mm Height, cap excluded: 249 mm. Individually wrapped models are supplied capped. Cases per palet: 12. code

body colour

cap description

presentation

individually wrapped

sterile

internal case quantity mouth Ă&#x2DC; mm

case weight

case volume

407005

natural

white, with joint

unscrewed

no

no

65

34

5.70

0.152

407005/T

natural

white, with joint

screwed

no

no

65

34

5.70

0.152

407005.O

natural

white, with joint

screwed

yes

RADIATION

65

34

5.70

0.152

407005.1

natural

white, with joint

screwed

yes

no

65

34

5.70

0.152

407006

brown

white, with joint

unscrewed

no

no

65

34

5.70

0.152

407006/T

brown

white, with joint

screwed

no

no

65

34

5.70

0.152

167


168

8. SAMPLE CONTAINERS

Push

Turn

2

1

3 2

c (MDD)

Security screw cap containers

Natural colour high density polyethylene containers. Capacities: 30, 60 and 125 ml. Ideal for liquids. 60 and 125 ml containers: Bottles with screw cap, leakproof closure with child-proof system and split seal. The cap is compound by two pieces that turn around themselves avoiding the cap to be opened, working as a security closure avoiding the accidental manipulation. To open the cap push it down following the figure on the cap. The sealed caps need to be unscrewed to break the seal, showing that it has not been manipulated. 30 ml container has a security seal, not the child-proof system closure. Pallet cases quantity: 16. code

cap colour

body colour

height mm

Ø base mm

body weight g

case quantity

case weight

case volume

1. Capacity: 30 ml. Ø Pilfer mouth 25, security closure standard system 444603202

white

natural

69

31

6.2

1,100

11.32

0.110

New 444603204

white

white

69

31

6.2

600

10.00

0.078

2. Capacity: 60 ml. Ø Pilfer mouth 28, security closure childproof system 444603300

white

natural

93.7

37.61

9.5

600

8.00

0.110

New 444602903

white

white

93.7

37.61

9.5

600

8.00

0.110

444602901

blue

natural

87.5

37.61

9.5

600

7.50

0.110

444602801

blue

white

87.5

37.61

9.5

600

7.50

0.110

13.6

300

5.15

0.110

3. Capacity: 125 ml. Ø Pilfer mouth 28, security closure childproof system 444603402

white

natural

114.8

48

We can supply other colours if required. See chapter 10. Sample storage and Cryogenics

Medicine cups Ultra clear polypropylene cup with cover in natural polyethylene, graduated up to 25 ml. Dimensions: Ø mouth: 35 mm, Ø base: 27 mm, height 40 mm. The cups are supplied bagged in stacks of 100 units. code

description

case quantity

case weight

case volume

430130

graduated cup

60 x 100

13.00

0.065

430100

push cover

3 x 2,000

7.20

0.046


8. SAMPLE CONTAINERS

1 1. Open at 180º, as supplied

2 2. Open at 90º

3

4

3. Closed but non tampered

5

4. Tampered lid

5. Opened and untampered

Hinged lid container Specially designed for milk, it is also suitable for other liquid or solid samples. Recommended for its use with FOSS® and DELTA® analytical systems, among others. Made of autoclavable polypropylene. Tamper evident Lid, attached to the body by means of a hinge. The lid is conceived to maintain 90º after its opening, enabling this pot to be used with just one hand. It has a frosted squared surface for identification. Excellent mechanical and chemical resistance.

Ask for coloured versions

c (IVD)

Hinged lid container, 50 ml

NEW

Graduated up to 50 ml. Code 410046 is supplied uncapped. Code 410056 is supplied uncapped inside an individual bag. code

description

case quantity

case weight

case volume

cases pallet

410046

50 ml container

800

7.5

0.14

20

410056

50 ml container individually wrapped

800

8.5

0.14

20

120 mm

79,3 mm

Ø 30,9 mm

c (IVD)

Hinged lid container, 45 ml

Graduated up to 45 ml. Code 410045 is supplied uncapped. Code 410050 is supplied uncapped inside an individual bag. code

description

case quantity

case weight

case volume

cases pallet

410045

45 ml container

900

8.6

0.14

20

410050

45 ml container individually wrapped

800

7.7

0.14

20

110 mm

66,9 mm

Ø 33 mm

We can manufacture special racks in aluminium or stainless steel under request.

169


170

9. LIQUID HANDLING


9. LIQUID HANDLING

171


172

9. LIQUID HANDLING Tips for automatic pipettes

DELTALAB tips: The perfect aid for a safe, easy, quick and accurate liquid handling. Low retention Autoclave resistant Good subjection High transparency Uniformity Free of metals Traceability

Excellent gripping High transparency Low liquid retention

Free of burs

Tips with filter The filter tip avoids aerosols and prevents pipette and / or sample contamination.

STANDARD Aerosol free

1. It purifies the air that goes through the filter, removing aerosol and contaminants

AA A

2. It partially absorbs the sample in case of overaspiration (10-20%) 3. It protects the sample from an accidentally non sterile pipette

Aerosol

HYDROPHOBIC POLYPROPYLENE

EXTRA

+

1. It purifies the air that goes through the filter, removing aerosol and contaminants A

A

Total block A

2. In case of overaspiration, the filter compacts when touching the liquid, and stops the pipetting 3. It protects the sample from an accidentally non sterile pipette

ple s sam Allowvering!! reco

HYDROPHOBIC POLYPROPYLENE

X-COLOUR 1. It purifies the air that goes through the filter, removing aerosol and contaminants 2. It partially absorbs the liquid in case of overaspiration (5-10%)

+ A

A

Warning! the sample’s touching the filter!

A

3. Visual warning: it gets blue when getting in contact with the sample 4. It protects the sample from an accidentally non sterile pipette

HYDROPHILIC POLYPROPYLENE

lly pecia For s sitive n e s les samp


9. LIQUID HANDLING Our range Our range of tips meet almost every liquid handling need, as they are available in a wide scope of options:

With or without filter in bulk or rack (with hinged, sliding, or free lid). Sterile, DNAse and RNAse free, with Standard, Extra or X-Colour filter, in rack. Sterile, without filter, packed in individual bag. Our racks are made of autoclavable polypropylene, and have been developed according to an identifying colour code: racks with tips without filter are blue or translucent colour, depending on the code; racks with filter tips are red colour; racks with Extra filter tips are white; and those with X-Colour filter are marble. *Excepting codes 327-26 (page 179) and 200076RF (page 182), in blue and translucent colour respectively.

0.1 - 10 μl tip Natural colour universal crystal tip, graduated. Gilson® type. El Rack made of autoclavable polypropylene up to 121º C. Racks with transparent lid and base in different colours: Rack without filter: blue base. STANDARD filter: red base. EXTRA FILTER: white base. X-COLOUR filter: base in marble colour. Suitable (not exclusive) Gilson®, Eppendorf®, Biohit®, Dsg®, Elkay®, Finnpipette®, Genex®, Jencons®, Nichiryo®, HTL®. code

s 200024 s 199084RC s 326-19 sss 327-19 sss 327-19X sss 327-19B

description

sterile

case quantity

case weight

case volume

tips in bulk

no

20 x 1,000

3.63

0.023

96 tips rack

no

10 x 96

1.92

0.009

filter tips in bulk

no

20 x 1,000

3.7

0.023

96 tips rack filter

RADIATION

10 x 96

1.8

0.009

RADIATION

10 x 96

1.8

0.009

RADIATION

10 x 96

1.8

0.009

96 tips rack EXTRA filter 96 tips rack X-COLOUR filter

Tips in bulk: minimum unit sale: 1 bag.

Colour codes: RNAse and DNAse free Metal free Pyrogen free

s s s

173


174

9. LIQUID HANDLING 0.1 - 10 μl tip Natural colour universal crystal tip, graduated. Gilson® type. Long shape, perfect to pipette samples in deep vessels. Suitable (not exclusive) Gilson®, Socorex®, Eppendorf®, Biohit®, Nichiryo®, Finnpipette®, Dsg®, Elkay®, Genex®, Jencons®, HTL®. Rack made of autoclavable polypropylene up to 121º C. Racks with transparent lid and base in different colours: Rack without filter: blue base. STANDARD filter: red base. EXTRA filter: white base. X-COLOUR filter: base in marble colour. code

s 301-01 s 301-01R s 301-01F sss 301-01FR sss 301-01FRX sss 301-01FRB

description

sterile

case quantity

case weight

case volume

tips in bulk

no

15 x 1,000

3.5

0.026

96 tips rack

no

10 x 96

1.7

0.009

filter tips in bulk

no

15 x 1,000

3.9

0.016

96 tips rack filter

RADIATION

10 x 96

1.8

0.009

RADIATION

10 x 96

1.8

0.009

RADIATION

10 x 96

1.8

0.009

96 tips rack EXTRA filter 96 tips rack X-COLOUR filter

Tips in bulk: minimum unit sale: 1 bag.

0.5 - 10 μl tip Natural colour universal crystal tip, bevelled. Eppendorf® type. Suitable (not exclusive) Eppendorf®, Gilson®, Biohit®, Brand®, Dsg®, Elkay®, Finnpipette®, Jencons®, Nichiryo®, Socorex®, HTL®. Rack made of autoclavable polypropylene up to 121º C. Racks with transparent lid and base in different colours: Rack without filter: blue base; STANDARD filter: red base; EXTRA filter: white base; X-COLOUR filter: base in marble colour. code

s 301-11 s 301-10 sss 301-09 s 326-37 sss 327-37R sss 327-37RX sss 327-37RB

description

sterile

case quantity

filter tips in bulk

no

25 x 1,000

4.9

0.048

96 tips rack

no

10 x 96

1.8

0.009

case volume

96 tips rack

RADIATION

10 x 96

1.8

0.009

filter tips in bulk

no

25 x 1,000

5

0.048

96 tips rack filter

RADIATION

10 x 96

1.8

0.009

RADIATION

10 x 96

1.8

0.009

RADIATION

10 x 96

1.8

0.009

96 tips rack EXTRA filter 96 tips rack X-COLOUR filter

Tips in bulk: minimum unit sale: 1 bag.

Colour codes: RNAse and DNAse free Metal free Pyrogen free

s s s

case weight


9. LIQUID HANDLING 0.5 - 10 μl tip Natural colour universal ultracapilar Eppendorf® tip. Suitable for gel use. Suitable (not exclusive) Eppendorf®, Socorex®, Nichiryo®, Oxford-Benchmate®. Rack made of autoclavable polypropylene up to 121º C. Transparent lid and blue base. The rack contains 204 tips distributed in 12 x17. code

s

327-13

description

sterile

case quantity

case weight

case volume

204 tips rack filter

RADIATION

5 x 204

0.80

0.006

Socorex® dispensers: please contact our commercial department.

2 - 20 μl tip Natural colour universal tip. Eppendorf® type. Available without filter (2-200μl), and with filter at 100μl. See our codes 200072 and 327-33. Suitable (not exclusive) Eppendorf®, Biohit®, Finnpipette®, Gilson®, Socorex®, Brand®, HTL®. Rack made of autoclavable polypropylene up to 121º C. Racks with transparent lid and base in different colours: Rack without filter: blue base. STANDARD filter: red base. EXTRA filter: white base. X-COLOUR filter: base in marble colour. code

s 200010F sss 200010FR sss 200010FRX sss 200010FRB

sterile

case quantity

case weight

case volume

filter tips in bulk

no

25 x 1,000

9.6

0.068

96 tips rack filter

RADIATION

10 x 96

1.9

0.013

RADIATION

10 x 96

1.9

0.013

RADIATION

10 x 96

1.9

0.013

description

96 tips rack EXTRA filter 96 tips rack X-COLOUR filter

Tips in bulk: minimum unit sale: 1 bag. Colour codes: RNAse and DNAse free Metal free Pyrogen free

s s s

175


176

9. LIQUID HANDLING 2 - 30 μl tip Natural colour universal filter tip, bevelled. Gilson® type. Suitable (not exclusive) Gilson® P20 P100 P200, Eppendorf®, Biohit®, Dsg®, Elkay®, Finnpipette®, Genex®, Jencons®, Socorex®, Nichiryo®, HTL®, etc. Rack made of autoclavable polypropylene up to 121º C. Racks with transparent lid and base in different colours: Rack with STANDARD filter: red base. EXTRA filter: white base. X-COLOUR filter: base in marble colour. code

s 327-36 sss 327-36R sss 327-36RX sss 327-36RB

description

sterile

case quantity

case weight

case volume

filter tips in bulk

no

25 x 1,000

9.4

0.072

96 tips rack filter

RADIATION

10 x 96

2.1

0.010

RADIATION

10 x 96

2.1

0.010

RADIATION

10 x 96

2.1

0.010

96 tips rack EXTRA filter 96 tips rack X-COLOUR filter

Tips in bulk: minimum unit sale: 1 bag.

2 - 100 μl tip Natural colour universal filter tip, bevelled. Gilson® type. Suitable (not exclusive) Gilson® P100 P200, Eppendorf®, Biohit®, Dsg®, Finnpipette®, Genex®, Jencons®, Nichiryo®, HTL®, etc.

Elkay®,

Rack made of autoclavable polypropylene up to 121º C. Racks with transparent lid and base in different colours: Rack with STANDARD filter: red base. EXTRA filter: white base. X-COLOUR filter: base in marble colour. code

s sss sss sss

description

sterile

case quantity

case weight

case volume

327-23

filter tips in bulk

no

25 x 1,000

9.4

0.072

327-24

96 tips rack filter

RADIATION

10 x 96

2

0.010

327-24X

96 tips rack EXTRA filter 96 tips rack X-COLOUR filter

RADIATION

10 x 96

2

0.010

RADIATION

10 x 96

2

0.010

327-24B

Tips in bulk: minimum unit sale: 1 bag.

Colour codes: RNAse and DNAse free Metal free Pyrogen free

s s s


9. LIQUID HANDLING 2 - 160 μl tip Natural colour universal filter tip, bevelled. Gilson® type. Identical tip as code 200078, but having the filter placed up to 160 μl. Suitable (not exclusive) Gilson® P100 P200, Eppendorf®, Biohit®, Dsg®, Elkay®, Finnpipette®, Genex®, Jencons®, Socorex®, Nichiryo®, HTL®, etc. Rack made of autoclavable polypropylene up to 121º C. Racks with transparent lid and base in different colours: Rack with STANDARD filter: red base. EXTRA filter: white base. X-COLOUR filter: base in marble colour. description

sterile

case quantity

case weight

case volume

327-15

96 tips rack filter

RADIATION

10 x 96

2

0.010

327-15X

96 tips rack EXTRA filter 96 tips rack X-COLOUR filter

RADIATION

10 x 96

2

0.010

RADIATION

10 x 96

2

0.010

code

sss sss sss

327-15B

2 - 200 μl tip Natural colour universal tip, bevelled. Gilson type®. Suitable (not exclusive) Gilson® P20 P100 P200, Eppendorf®, Biohit®, Dsg®, Elkay®, Finnpipette®, Genex®, Jencons®, Socorex®, Nichiryo®, HTL®, etc. Rack made of autoclavable polypropylene up to 121º C; with transparent lid and blue base. code

s 200078 s 199078RC sss 199078N

description

sterile

case quantity

case weight

case volume

tips in bulk

no

25 x 1,000

9.2

0.072

96 tips rack

no

10 x 96

2

0.010

96 tips rack

RADIATION

10 x 96

2

0.010

Tips in bulk: minimum unit sale: 1 bag.

Colour codes: RNAse and DNAse free Metal free Pyrogen free

s s s

177


178

9. LIQUID HANDLING 2 - 200 (100) μl tip Natural colour universal tip. Eppendorf® type. Suitable (not exclusive) Eppendorf®, Gilson®, Brand®, Biohit®, Dsg®, Elkay®, Finnpipette®, Genex®, Jencons®, Kartell®, Nichiryo®, Socorex®, HTL®. Rack made of autoclavable (up to 121 ºC) polypropylene. Racks with transparent lid and base in different colours: Rack without filter: blue base. STANDARD filter: red base. EXTRA filter: white base. X-COLOUR filter: base in marble colour. code

description

sterile

case quantity

case weight

case volume

2 - 200 μl tip

s 200072 s 199014RC sss 199014N

tips in bulk

no

25 x 1,000

9.5

0.072

96 tips rack

no

10 x 96

1.9

0.009

96 tips rack

RADIATION

10 x 96

1.9

0.009

tips in bulk

no

25 x 1,000

9.5

0.072

96 tips rack filter

RADIATION

10 x 96

2.1

0.009

RADIATION

10 x 96

2.1

0.009

RADIATION

10 x 96

2.1

0.009

2 - 100 μl filter tip

s 327-33 sss 327-33R sss 327-33RX sss 327-33RB

96 tips rack EXTRA filter 96 tips rack X-COLOUR filter

Tips in bulk: minimum unit sale: 1 bag.

2 - 200 μl tip Universal tip, bevelled. Gilson® type. Tips with filter: natural colour. Tips without filter: yellow colour. Suitable (not exclusive) Gilson®, Eppendorf®, Dsg®, Elkay®, Finnpipette®, Jencons®, Nichiryo®, HTL®, Socorex® Akura.

Genex®,

Rack made of autoclavable (up to 121ºC) polypropylene. Racks with transparent lid and base in different colours: Rack without filter: blue base. STANDARD filter: red base. EXTRA filter: white base. X-COLOUR filter: base in marble colour. code

description

sterile

case quantity

case weight

case volume

filter tips in bulk

no

25 x 1,000

9.4

0.072

96 tips rack filter

RADIATION

10 x 96

2

0.010

RADIATION

10 x 96

2

0.010

RADIATION

10 x 96

2

0.010

Natural colour:

s 327-34 sss 327-34R sss 327-34RX sss 327-34RB

96 tips rack EXTRA filter 96 tips rack X-COLOUR filter

Yellow colour:

s s s

200016

tips in bulk

no

25 x 1,000

9,4

0.072

200016B

single tips individually wrapped

RADIATION

200

0,19

0.002

200016R

96 tips rack

no

10 x 96

2

0.010

Tips in bulk: minimum unit sale: 1 bag. Colour codes: RNAse and DNAse free Metal free Pyrogen free

s s s


9. LIQUID HANDLING 1 - 200 μl tip Universal natural colour tip with collar for gel. Suitable (not exclusive) Pipetman®, Eppendorf®, Titertek®, Biohit®, Socorex®, Nichiryo®, Costar Corning®, Oxford®, Rainin®, Finnpipette®. Translucent rack made of autoclavable polypropylene with hinged lid. code

s 200079 sss 200079R sss 200079F sss 200079FS

description

sterile

case quantity

case weight

case volume

tips in bulk

no

10 x 1,000

9.2

0.073

96 tips rack

RADIATION

10 x 96

4.5

0.048

RADIATION

10 x 96

4.5

0.048

RADIATION

10 x 96

4.5

0.048

96 tips rack filter 1-20 μl 96 tips rack filter 1-100 μl

Tips in bulk: minimum unit sale: 1 bag.

1 - 200 μl tip Universal natural colour tip with 91 mm length. Suitable (not exclusive) Pipetman®, Eppendorf®, Nichiryo®, Costar Corning®, Oxford®, Volac®, Socorex®, Titertek®, SMI®, Rainin®, Finnpipette®, etc. Rack made of polypropylene autoclavable up to 121ºC. Transparent lid and blue base, with 204 tips in 12 x 17 distribution. description

sterile

case quantity

case weight

case volume

200026

tips in bulk

no

5 x 1,000

3.48

0.050

327-26

204 tips rack filter

RADIATION

8 x 204

2.02

0.012

code

s sss

Tips in bulk: minimum unit sale: 1 bag.

Colour codes: RNAse and DNAse free Metal free Pyrogen free

s s s

179


180

9. LIQUID HANDLING 1 - 200 μl tip Natural colour universal tip. Designed to work with viscous fluids like glycerol or thick tissue homogenates. Suitable also for fragile cellular structures, minimizing the risk of tearing or rupture. Suitable (not exclusive) Eppendorf®, Socorex®, Nichiryo®, Finnpipette®, Biohit®, Oxford®, Pipetman®, Rainin®, Costar Corning®, Volac®. Rack made of polypropylene autoclavable up to 121º C. Transparent lid and blue base. description

sterile

case quantity

case weight

case volume

327-40

tips in bulk

no

10 x 1,000

4.24

0.031

327-40RC

96 tips rack filter

no

10 x 96

2

0.001

code

s s

Tips in bulk: minimum unit sale: 1 bag.

5 - 200 μl tip Eppendorf® universal tip. Suitable (not exclusive) Eppendorf®, Gilson®, Brand®, Biohit®, Dsg®, Elkay®, Finnpipette®, Genex®, Jencons®, Nichiryo®, Socorex®, HTL®. Rack made of autoclavable polypropylene up to 121ºC. Transparent lid and blue base. code

s s s

description

sterile

case quantity

case volume

200009

tips in bulk

no

25 x 1,000

9.5

0.072

200009B

single tips individually wrapped

RADIATION

200

0.19

0.002

200009R

96 tips rack

no

10 x 96

1.98

0.009

Tips in bulk: minimum unit sale: 1 bag.

Colour codes: RNAse and DNAse free Metal free Pyrogen free

s s s

case weight


9. LIQUID HANDLING 5 - 200 μl tip Yellow universal tip, Gilson® type. Suitable (not exclusive) Gilson®, Eppendorf®, Biohit®, Dsg®, Elkay®, Finnpipette®, Genex®, Jencons®, Nichiryo®, HTL®. Rack made of polypropylene autoclavable up to 121ºC. Transparent lid and blue base. description

sterile

case quantity

case weight

case volume

199083

tips in bulk

no

25 x 1,000

9.4

0.072

199620

96 tips rack

no

10 x 96

1.7

0.009

code

s s

Tips in bulk: minimum unit sale: 1 bag.

Socorex® pipettes: please contact our commercial department.

2 - 300 μl tip Natural colour universal tip. Biohit® type. Suitable (not exclusive) Gilson® P200, Finnpipette® (old model), Labsystems®, etc… Rack made of autoclavable polypropylene up to 121º C. Transparent lid and blue base. description

sterile

case quantity

case weight

case volume

200074

tips in bulk

no

24 x 1,000

8.3

0.072

199076RC

96 tips rack

no

10 x 96

1.8

0.010

code

s s

Tips in bulk: minimum unit sale: 1 bag.

Colour codes: RNAse and DNAse free Metal free Pyrogen free

s s s

181


182

9. LIQUID HANDLING 2 - 200 μl tip

NEW

Yellow universal tip, with a 50 μl margin to prevent any accidental overaspiration. Filter tip is neutral instead of yellow. Translucent rack made of autoclavable polypropylene up to 121ºC; with hinged lid. Suitable (not exclusive) Eppendorf®, Socorex®, Gilson®, Nichiryo®, Biohit®, Brand®, Jencons®, Thermo®, DSG®, Elkay®, HTL®, Finnpipette®, Genex®. code

s 200076 s 200076R s 200076F sss 200076RF

description

sterile

case quantity

case weight

case volume

tips in bulk

no

25 x 1,000

9.5

0.072

tips in rack

no

10 x 96

1.98

0.009

filter tips in bulk

no

25 x 1,000

9.6

0.072

filter tips in rack

RADIATION

10 x 96

1.99

0.009

Tips in bulk: minimum unit sale: 1 bag.

5 - 200 μl tip Natural colour universal tip, bevelled. MLA® type. Translucent rack made of autoclavable polypropylene up to 121ºC; with hinged lid. description

sterile

case quantity

case weight

case volume

200017

tips in bulk

no

25 x 1,000

10.2

0.072

200017R

96 tips rack

no

10 x 96

1.8

0.086

code

s s

Tips in bulk: minimum unit sale: 1 bag.

5 - 200 μl tip Natural colour universal tip, bevelled. Oxford® type. Suitable for the DiaMed-Micro typing System machine. Translucent rack made of autoclavable polypropylene up to 121ºC; with hinged lid. description

sterile

case quantity

200019

tips in bulk

no

12 x 1,000

7.2

0.072

200019R

96 tips rack

no

10 x 96

1.8

0.086

code

s s

Tips in bulk: minimum unit sale: 1 bag.

Colour codes: RNAse and DNAse free Metal free Pyrogen free

s s s

case weight

case volume


9. LIQUID HANDLING 20 - 300 μl tip Natural colour universal tip. Eppendorf® type. Suitable (not exclusive) Eppendorf®, Gilson®, Brand®, Biohit®, Finnpipette®, Nichiryo®, Socorex®.

Elkay®,

Jencons®,

Rack made of autoclavable (up to 121 ºC) polypropylene. Racks with transparent lid and base in different colours: Rack without filter: blue base. STANDARD filter: red base. EXTRA filter: white base. X-COLOUR filter: base in marble colour. code

s 200077 s 200077R s 200077F sss 200077FR sss 200077FRX sss 200077FRB

description

sterile

case quantity

case weight

case volume

tips in bulk

no

20 x 1,000

9.4

0.072

96 tips rack

no

10 x 96

1.9

0.009

filter tips in bulk

no

20 x 1,000

9.4

0.072

96 tips rack filter

RADIATION

10 x 96

2.0

0.009

RADIATION

10 x 96

2.0

0.009

RADIATION

10 x 96

2.0

0.009

96 tips rack EXTRA filter 96 tips rack X-COLOUR filter

Tips in bulk: minimum unit sale: 1 bag.

100 - 1,000 μl tip Universal tip with collar. Blue or natural colour. Suitable (not exclusive) Eppendorf®, Gilson®, Biohit®, DSG®, Elkay®, Finnpipette®, Genex®, Jencons®, Nichiryo®. Suitable for Menarini®. Rack made of polypropylene, autoclavable up to 121ºC. Racks with transparent lid and base in different colours depending on the model. Tips without filter: blue base. STANDARD filter: red base. EXTRA filter: white base. X-COLOUR filter: base in marble colour. code

description

sterile

case quantity

case weight

case volume

0.084

Blue colour:

s 200012 s 200012B s 200012R Natural colour: s 200070 s 200070R sss 200070NR s 327-30 sss 327-30R sss 327-30RX sss 327-30RB

tips in bulk

no

10 x 1,000

8.1

single tips individually wrapped

RADIATION

175

0.27

0.004

96 tips rack

no

10 x 96

2.4

0.015

tips in bulk

no

10 x 1,000

8.1

0.084

96 tips rack

no

10 x 96

2.4

0.015

96 tips rack

RADIATION

10 x 96

2.4

0.015

filter tips in bulk

no

10 x 1,000

8.1

0.084

96 tips rack filter

RADIATION

10 x 96

2.4

0.015

RADIATION

10 x 96

2.4

0.015

RADIATION

10 x 96

2.4

0.015

96 tips rack EXTRA filter 96 tips rack X-COLOUR filter

Tips in bulk: minimum unit sale: 1 bag. Colour codes: RNAse and DNAse free Metal free Pyrogen free

s s s

183


184

9. LIQUID HANDLING 100 - 1,000 μl tip Gilson® Universal tip. Suitable (not exclusive) Gilson®, Eppendorf®, Biohit®, DSG®, Elkay®, Finnpipette®, Genex®, Jencons®, Nichiryo®, Socorex®, HTL®. Rack made of polypropylene, autoclavable up to 121ºC. Racks with transparent lid and base in different colours depending on the model. Tips without filter: blue base. STANDARD filter: red base. EXTRA filter: white base. X-COLOUR filter: base in marble colour. code

description

sterile

case quantity

case weight

case volume

tips in bulk

no

10 x 1,000

10.8

0.084

96 tips rack

no

10 x 96

2,8

0.015

tips in bulk

no

10 x 1,000

10.8

0.057

96 tips rack

no

10 x 96

2.6

0.015

96 tips rack

RADIATION

10 x 96

2.6

0.015

filter tips in bulk

no

10 x 1,000

10.8

0.057

96 tips rack filter

RADIATION

10 x 96

2.7

0.015

RADIATION

10 x 96

2.7

0.015

RADIATION

10 x 96

2.7

0.015

Blue colour:

s 200080.1 s 200080.1R Natural colour: s 200082 s 200082R sss 200082NR s 200082F sss 327-16 sss 327-16X sss 327-16B

96 tips rack EXTRA filter 96 tips rack X-COLOUR filter

Tips in bulk: minimum unit sale: 1 bag.

100 - 1,000 μl tip Universal tip with collar. Natural colour, Eppendorf® type. Suitable (not exclusive) Eppendorf®, Nichiryo®, Biohit®, Brand®, Dsg®, Gilson®, Elkay®, Finnpipette®, Genex®, Jencons®, HTL® Suitable for Menarini®. Translucent rack made of autoclavable polypropylene up to 121ºC; with hinged lid. code

s 200029 s 200029R s 200029F sss 200029RF

description

sterile

case quantity

tips in bulk

no

10 x 1,000

8.1

0.084

96 tips rack

no

10 x 96

2.4

0.015

filter tips in bulk

no

10 x 1,000

8.1

0.084

96 tips rack filter

RADIATION

10 x 96

2.4

0.015

Tips in bulk: minimum unit sale: 1 bag.

Colour codes: RNAse and DNAse free Metal free Pyrogen free

s s s

case weight

case volume


9. LIQUID HANDLING 5 - 1,000 μl tip Universal natural colour tip. Beckmann® type. For use (but not limited to) Sherwood®, Lancer®. code

s

200021

description

sterile

case quantity

case weight

case volume

tips in bulk

no

10 x 1,000

6.8

0.072

Tips in bulk: minimum unit sale: 1 bag.

100 - 1,000 μl tip Universal tip. Oxford® type. For use (but not limited to) Finnpipette®, Labsystem®. code

s

200020

description

sterile

case quantity

case weight

case volume

tips in bulk

no

8 x 1,000

6.6

0.072

Tips in bulk: minimum unit sale: 1 bag.

100 - 1,000 μl tip Natural colour universal tip special for MLA®. Bevelled. Suitable (not exclusive) Finnpipette® colour. code

s

200018

description

sterile

case quantity

case weight

case volume

tips in bulk

no

8 x 1,000

6.6

0.072

Tips in bulk: minimum unit sale: 1 bag.

Colour codes: RNAse and DNAse free Metal free Pyrogen free

s s s

185


186

9. LIQUID HANDLING 100 - 1,000 μl tip Natural colour universal tip, bevelled and graduated. For use (but not limited to) Gilson®, Rainin®, Finnpipette®, Nichiryo®, Eppendorf®, Biometra®. code

sss

200022

description

sterile

case quantity

case weight

case volume

tips in bulk

no

10 x 1,000

10.9

0.008

Tips in bulk: minimum unit sale: 1 bag.

Colour codes: RNAse and DNAse free Metal free Pyrogen free

s s s

Pipetting reservoir Reservoir specially designed for use with multichannel pipettes. Made of polystyrene. Code M-210 is supplied sterile and individually wrapped. case weight

case volume

description

M-200

150 ml

no

50

0.18

0.00002

EW M-210

150 ml

RADIATION

50

0.21

0.00050

M-203

25 ml

no

5 x 10

0.02

0.00002

N

sterile

case quantity

code

See our plates for liquid handling on chapter 2. Molecular Biology.

Pipetting reservoir 8 and 12 channel reservoir, 40 ml, PS, sterile. Individually wrapped.

Dimensions: 330089: 83 x 126 x 13 mm 330129: 126 x 83 x 13 mm code

description

sterile

case quantity

case weight

case volume

330089

8 channel. 40 ml

RADIATION

10

0.03

0.0004

330129

12 chanel. 40 ml

RADIATION

10

0.05

0.0004


9. LIQUID HANDLING 1 - 5 ml macrotip Natural colour universal macro tip, with collar. Eppendorf® type. For use (but not limited to) Biohit®, Dsg®, Eppendorf®, Genex®, Jencons®, Socorex® 2005 model. Rack made of polypropylene autoclavable up to 121º C. Polycarbonate transparent lid and marble base. Sliding lid. description

sterile

case quantity

case weight

case volume

tips in bulk

no

8 x 250

5.8

0.072

50 tips rack

no

4 x 50

2.4

0.013

50 tips rack filter

RADIATION

4 x 50

2.4

0.013

code

s 200075 s 199075 sss 200075RF

1 - 5 ml macrotip Natural colour universal macro tip with collar. Socorex® type. For use (but not limited to) Nichiryo®, Oxford®. description

sterile

case quantity

case weight

case volume

831-312

tips in bulk

no

12 x 250

8.5

0.080

831-312B

single tips individually wrapped

RADIATION

75

0.3

0.004

code

Colour codes: RNAse and DNAse free Metal free Pyrogen free

s s s

187


188

9. LIQUID HANDLING 1 - 5 ml macrotip Blue colour universal macro tip with collar. Socorex® type. For use (but not limited to) Gilson®, Nichiryo®. Rack made of polypropylene autoclavable up to 121º C. Transparent lid and marble base. Sliding lid. description

sterile

case quantity

case weight

case volume

200083

tips in bulk

no

8 x 250

6.0

0.060

200083R

50 tips rack

no

4 x 50

2.1

0.010

code

s s

1 - 5 ml macrotip Natural colour universal macro tip with collar. Finnipipette® type. For use (but not limited to) Brand®, Labsystem®. Rack made of polypropylene autoclavable up to 121º C. Transparent lid and marble base. Sliding lid. code

s 200028 s 200028R sss 200028RF

description

sterile

case quantity

tips in bulk

no

50 tips rack

no

50 tips rack filter

RADIATION

Colour codes: RNAse and DNAse free Metal free Pyrogen free

s s s

case weight

case volume

8 x 250

6.5

0.060

4 x 50

2.2

0.010

4 x 50

2.2

0.010


9. LIQUID HANDLING

2 - 10 ml macrotip Natural colour universal macro tip with collar. Gilson® type. For use (but not limited to) Finnipipette®, Labsystem®, Socorex®. Rack made of polypropylene autoclavable up to 121º C. Transparent lid and marble base. Sliding lid. code

s 200015 s 200015R sss 200015RF

description

sterile

case quantity

case weight

case volume

tips in bulk

no

10 x 100

6.9

0.072

25 tips rack

no

4 x 25

2.2

0.015

25 tips rack filter

RADIATION

4 X 25

2.2

0.015

Colour codes: RNAse and DNAse free Metal free Pyrogen free

s s s

Please contact our commercial department to get more information about our wide range of Socorex® products: * Pipettes: adjustable and fixed volume; digital, analogical and electronical; multichannel... * Microdispensers, table top dispensers and compact dispensers * Self-refilling syringes

189


9. LIQUID HANDLING Ritips® professional Different capacities. Black graduations. Each box of 25ml and 50ml contains a free of charge adapter. For use (but not limited to) Biohit® eLine® Lite y Pro, Brand® HandyStep electronic, Eppendorf® Multipette Plus, Multipette Pro, y Multipette 4780, Nichimate® Stepper (Nichiryo®), Gilson® Distriman, StepMate®, Ripette® and other compatible dosage systems. When used with Multipette plus and Multipette Pro the display dispenser is inoperative. description

case quantity

case weight

case volume

317-314.1

Combitip plus 1.0 ml

100

0.365

0.006

317-315.1

Combitip plus 2.5 ml

100

0.478

0.006

317-316.1

Combitip plus 5 ml

100

0.511

0.006

317-317.1

Combitip plus 10 ml

100

0.617

0.006

317-318.1

Combitip plus 25 ml

25

0.413

0.006

317-319.1

Combitip plus 50 ml

25

0.511

0.006

NON STERILE

code

Ritips® standard Different capacities, standard and sterile models. Red graduations. For use (but not limited to) Eppendorf®, Multipette 4780, Brand® Handystep y Handystep Electronic, Nichimate® Stepper, Ripette® y Ripette® GenX, Minilab® 100/101, Stepmate®, Easystep®, Gilson® Distriman®, and other compatible dosage systems… Sterile models are Rnase, Dnase and pyrogen free. Individually wrapped. description

case quantity

case weight

case volume

316-313.1

Combitip 0.5 ml

100

0.353

0.006

316-314.1

Combitip 1.25 ml

100

0.440

0.006

316-315.1

Combitip 2.5 ml

100

0.543

0.006

316-316.1

Combitip 5 ml

100

0.712

0.006

316-317.1

Combitip 12.5 ml

100

0.901

0.006

316-318.1

Combitip 25 ml

25

0.407

0.006

316-319.1

Combitip 50 ml

25

0.509

0.006

Combitip 0.5 ml

100

0.511

0.008

code

NON STERILE

sterile models

316-313.2 316-314.2 STERILE

190

316-315.2 316-316.2 316-317.2 316-318.2 316-319.2

ss ss ss ss ss ss ss

Combitip 1.25 ml

100

0.574

0.008

Combitip 2.5 ml

100

0.660

0.008

Combitip 5 ml

100

0.848

0.008

Combitip 12.5 ml

100

1.017

0.008

Combitip 25 ml

25

0.495

0.008

Combitip 50 ml

25

0,570

0,008

Colour codes: RNAse and DNAse free Pyrogen free

s s

Distributors – steppers are available under request. Please ask our commercial department for more information.


9. LIQUID HANDLING Our Pasteur Pipettes are manufactured according to ISO 9001:2000.

POLYETHYLENE Transfer Pipettes -

Sterile and non-sterile Low-affinity surface Attached bulb avoids cross-contamination One-step biohazard disposal Shatterproof, low density polyethylene which is non-toxic and inert - Can be frozen in liquid nitrogen You can ask for our pipettes in three kinds of presentation: - Bag made (steriles or not): of polyethylene (picture 1). - Peel-pack (steriles): packed individually with its code, lot number and expiration date printed on the paper (picture 2). - Flow-pack (steriles): packed individually with its code, lot number and expiration date printed on polyethylene bag (picture 3).

Fig. 1

Used in Lab Procedures with: - Beakers - Volumetric flasks - Vials - Centrifuge tubes - Cryogenic vials - Dishes - Microtiter plates - Microscope slides

Life Sciences Applications: - Cells in flasks and tubes: large volume, tong pipettes - Isolating Cells: large aperture pipettes - Control techniques: narrow stem and fine tip

Industrial Research and Testing: - Chromatography - Viscous liquid samples and transfers - Field Testing - Spectrophotometry Cuvettes - Reagent Handling

Fig. 2

Clinical Applications: - Blood Banking - Small volume dispensing - Sedimentation and Storage - Bottle Sampling - Slides

Fig. 3

191


192

9. LIQUID HANDLING

D

C

B

A

Micropipettes Made in transparent, inert and low intensity polyethylene. They are used as volume measurers, to incorporate in kits of reagents, pregnancy tests, etc. They can be frozen in liquid nitrogen. Before use, press the upper bulb, filling all the stem, and the rest remains in the inferior bulb, which it is not due to give. Volumetrical tolerance: ± 10 %. mod.

code

presentation

lenght mm

dispense volume μl

case weight

case volume

A

201020

500

51,6

20

0,3

0,002

B

201040

500

59,2

40

0,4

0,003

C

201110

500

83,0

100

0,4

0,004

D

201250

500

102,0

250

0,4

0,005

NEW

B

A

Special purpose pipettes Made in transparent, inert and low intensity polyethylene. They can be frozen in liquid nitrogen. Volumetrical tolerance: ± 10 %. mod.

code

presentation

lenght mm

Ø stem mm

total capacity ml

bulb draw μl

case weight

case volume

A

210030

8 x 500

130

3.8

0.5

0.2

3

0.03

B

210005

500

50

1.19

1.3

1.0

0.4

0.003


9. LIQUID HANDLING

A pipette 3 ml

B

C pipette 1.5 ml

Graduated pipettes Made in transparent, inert and low intensity polyethylene. Sterile models are ethylene oxide sterilized. Volumetrical tolerance: ± 10 %. mod.

code

presentation

sterile

lenght mm

Ø stem mm

total capacity ml

bulb draw ml

graduations

ml

case weight

case volume

pallet quantity

A

200002

10 x 500

no

150

7.0

5.0

1.8

0.50

8.60

0.102

100,000

B

200006

10 x 500

no

154

7.8

7.0

3.2

0.50

8.50

0.102

100,000

B

200062.0

10 x 500 bag 20 u.

OXIDE

154

7.8

7.0

3.2

0.50

6.40

0.098

100,000

B

200007

6 x 500 individually wrapped peel-pack

OXIDE

154

7.8

7.0

3.2

0.50

7.20

0.165

27,000

B

200037

6 x 500 individually wrapped flow-pack

OXIDE

154

7.8

7.0

3.2

0.50

7.20

0.165

27,000

C

200003

6 x 500

no

154

5.0

5.0

3.1

0.25

5.94

0.062

90,000

C

200032.0

6 x 500 bag 20 u.

OXIDE

154

5.0

5.0

3.1

0.25

6.48

0.067

90,000

C

200004

6 x 500 individually wrapped peel-pack

OXIDE

154

5.0

5.0

3.1

0.25

7.20

0.165

27,000

C

200034

6 x 500 individually wrapped flow-pack

OXIDE

154

5.0

5.0

3.1

0.25

7.20

0.165

27,000

193


194

9. LIQUID HANDLING

A

B C

D

E

General purpose pipettes Made in transparent polyethylene. Model 200120 is sterile by radiation. Volumetrical tolerance: ± 10 %. mod.

code

presentation

sterile

lenght mm

Ø stem mm

total capacity ml

bulb draw ml

case weight

case volume

A

200121

10 x 1,000

no

67

3.9

1.1

0.5

7.21

0.047

B

200122

10 x 1,000

no

115

2.9

1.3

0.7

7.5

0.047

C

200001

8 x 500

no

87

4.7

1.7

0.9

3.5

0.040

D

200000

10 x 400

no

150

6.3

8.0

4.6

8.7

0.095

D

200120

8 x 400 bag 20 u.

RADIATION

150

6.3

8.0

4.6

9

0.130

E

200005

6 x 500

no

150

2.5

4.0

3.1

4.2

0.070

E

200008

6 x 500 individually wrapped peel-pack

OXIDE

150

2.5

4.0

3.1

7.2

0.165

E

200038

6 x 500 individually wrapped flow-pack

OXIDE

150

2.5

4.0

3.1

7.2

0.165

A

C

B


9. LIQUID HANDLING

A

B

C

General purpose pipettes Made in transparent an inert polyethylene. Sterile models are sterilized by ethylene oxide. Volumetrical tolerance: ± 10 %. mod.

code

presentation

sterile

lenght mm

Ø stem mm

total capacity ml

bulb draw ml

case weight

case volume

A

210003

8 x 400

no

104

3.0

1.5

1.0

2.4

0.023

A

210023

500 individually wrapped peel-pack

OXIDE

104

3.0

1.5

1.0

1.7

0.03

B

210002

10 x 500

no

144

5.0

5.0

3.3

7.4

0.099

B

210022

500 individually wrapped peel-pack

OXIDE

144

5.0

5.0

3.3

1.7

0.03

C

210004

8 x 250

no

153

3.0

5.5

3.0

2.5

0.04

210024

500 individually wrapped peel-pack

OXIDE

153

3.0

5.5

3.0

1.9

0.03

C

Extra long pipettes Made in transparent polyethylene. Model 200050 is graduated each ml up to 5 ml. Volumetrical tolerance: ± 10 %. mod.

code

presentation

lenght mm

Ø stem mm

total capacity ml

bulb draw ml

case weight

case volume

A

200050

10 x 250

216

B

200060

10 x 100

300

-

5.0

3.5

8.18

0.102

9.0

23.0

7.1

7.3

0.106

C

210006

10 x 400

225

5.0

6.0

2.3

8.4

0.099

195


196

9. LIQUID HANDLING

C

B

Three models of tips available: A = TAPE END, B = WIDE TIP, C = OPEN TIP (recommended for viscose samples).

A

Sterile serological pipettes Single use, made of crystal polystyrene. Accuracy > 98 %. Sterilised by radiation. Made in one piece for an optimum precision, except code 90043 (50ml). No liquid retention: as tip is not sealed, liquid is not held at the joint. Total dispensing guaranteed. Non pyrogenic (ISO 10993-11), non cytotoxic (ISO 10993-5) and non haemolytic (ISO 10993-4). DNase and RNase free. Volumes range from 1 to 25 ml. Pipettes include a coloured cotton plug for better identification. The peel-pack have a fiber-free packaging including a strip for easy opening. Black graduations are bright, black and permanent. 5, 10 and 25 ml models have negative graduations for extra capacity, and a second reverse scale (ascending and descending). code

capacity ml

presentation

900030

1

1 peel pack

900031

1

bag of 25

900130

1

1 peel pack

900131

1

bag of 25

900032

2

1 peel pack

900033

2

bag of 25

900133

2

bag of 25

900034

5

1 peel pack

900038

5

bag of 25

cotton colour

s s s s s s s s s

case quantity

tip

graduation negative total ml graduation ml capacity ml

case weight

case volume

4 x 500

A

0/0.9

until –0.3

1.3

10.10

0.072

4 x 1,000

A

0/0.9

until –0.3

1.3

14.00

0.072

4 x 500

C

0/0.9

until –0.3

1.3

10.10

0.072

4 x 1,000

C

0/0.9

until –0.3

1.3

14.00

0.072

4 x 500

A

0/1.8

until –0.4

2.4

11.30

0.072

4 x 1,000

A

0/1.8

until –0.4

2.4

17.20

0.072

4 x 1,000

C

0/1.8

until –0.4

2.4

17.20

0.072

4 x 250

A

0/4

until –3

8

12.20

0.072

4 x 375

A

0/4

until –3

8

15.10

0.072

Find trays, rotary stands and other products for pipettes in Chapter 12. General Labware

Pipetting bulb Made of rubber. Used to avoid mouth pipetting and contamination risk. Can be opened, cleaned and autoclaved. Ideal for Wintrobe and Westergren pipettes. code

description

bag quantity

bag weight

bag volume

19201

red pippeting bulb

1

0.10

0.001


9. LIQUID HANDLING

code

capacity ml

presentation

900144

5

1 peel pack

900134

5

1 peel pack

900036

10

1 peel pack

900037

10

bag of 25

900146

10

1 peel pack

900147

10

bag of 25

900136

10

1 peel pack

900137

10

bag of 25

900041

25

1 peel pack

EW 900042

25

bag of 10

900043

50

1 peel pack

N

NEW

cotton colour

case quantity

tip

s s s s s s s s s s s

4 x 250

B

graduation negative total ml graduation ml capacity ml

0/4

until –3

8

C

0/4

until –3

8

12.20

0.072

0/9

until –3

13

11.20

0.072

4 x 250

A

0/9

until –3

13

12.80

0.072

4 x 200

B

0/9

until –3

13

11.20

0.072

4 x 250

B

0/9

until –3

13

12.80

0.072

4 x 250

C

0/9

until –3

13

11.20

0.072

4 x 250

C

0/9

until –3

13

12.80

0.072

4 x 100

A

0/23

until –10

35

11.20

0.072

4 x 100

A

1/5

until –2.6

27.6

11.20

0.072

200

A

1/2

until –5

55

6.70

0.072

Several models for various pipette volumes. Designed for fast and efficient pipetting with simple, one handed operation. Pipettes fit smoothly into collar. Rotate the knurled thumb wheel on the side for precision filling or dispensing, and press the fast release lever for quick emptying. Easy to use and easily disassembled for cleaning. Sizes are colour coded. Pipette pumps resist acids and alkalies. Attention: New models coming soon. bag quantity

0.072

A

Pipette pumps

colour

12.20

4 x 200

See our Chapter 10. Sample storage and Cryogenics

description

case volume

4 x 250

See our Chapter 11. Safety.

code

case weight

bag weight

bag volume

W-100

up to 2 ml

blue

1

0.05

0.0001

W-110

up to 10 ml

green

1

0.05

0.0001

W-120

up to 25 ml

red

1

0.05

0.0001

197


198

9. LIQUID HANDLING

Non graduated serological pipettes. Sterile Single use, made in polystyrene, without graduation. In sterile packing by radiation. DNAse and RNAse free, non cytotoxic, non haemolitic, apyrogen. Without cotton. Standard tip, see picture (A) at the previous page. Suitable for Integra VacuSafe Comfort and others. Dimensions: External tip diameter, between 5.45 - 5.7 mm, internal diameter tip end: between 1.8 - 2.2 mm. code

capacity ml

presentacion

case quantity

case weight

case volume

900032.1

2

peel pack de 1

4 x 500

11.30

0.072

Sterile single use Straw-like pipettes Single use straw-like non graduated pipettes, ideal for food industry use. In polyethylene. Suitable for automatic pipettes. Sterilized by radiation. Packaged in flow packs of 25 units. Outer diameter: 4.35 mm. Inner diameter: 3.65 mm. code

capacity ml

lenght mm

case quantity

case weight

case volume

900050

1.0

40 x 25

40 x 25

1.14

0.008

Pipette trays Made of white PVC. Resistant to temperatures from -20 to +80ºC. Model 1, code 19252, is perfect to fit inside drawers. It includes four compartments that can hold up to thirty pipettes of 1, 2, 5, or 10 ml. Model 2, code 19996. Sixteen pipettes up to 10 mm diameter can be accommodated longitudinally; laterally, seven pipettes up to 20 mm diameter. Tray edges are ergonomically designed for a better handling. It is also useful with other instruments.

1

2

mod.

code

dimensions mm

case quantity

case weight

case volume

1

19252

426 x 300 x 30

1

0.40

0.006

2

19996

283 x 216 x 40

6

1.30

0.018


9. LIQUID HANDLING

5

4

1

2

3 closed tip

Glass Pasteur pipettes, open mouth Soda glass. Dimensions: Ø mouth: 6.95 ± 0.15 mm; Ø tip: 1.2 ± 0.15 mm; 0.53 ± 0.03 thick. mod

code

total lenght mm

stem lenght mm

case quantity

case weight

case volume

1

701

2

702

150

59

4 x 250

3.20

0.011

230

130

4 x 250

3.60

0.016

Glass Pasteur pipettes, closed tip Made of neutral soda glass, with the tip closed and cotton in the mouth. Easy opening of the closed part by pushing it slightly. Dimensions: mouth: 7.00 mm; tip: 1.4 to 1.6 mm; thickness: 0.50 mm. mod

code

total lenght mm

stem lenght mm

case quantity

case weight

case volume

3

712

230

130

4 x 250

4.00

0.016

Pipetting bulbs Designed for pipetting with plastic and glass pipettes. mod

code

total length mm

material

Ø max. mm

capacity pipetting ml

bag quantity

bag weight

bag volume

4

19194

latex

35

14

2

100

0.15

0.0014

5

19195

silicone

40

15

1,5 - 1,8

50

0.26

0.0014

1. Evacuate the 2. Intake by air by pressing pressing on the bulb, as the point B drawing indicates.

3. Drain the liquid by pressing on point A

4. Blow out the pipette by pressing as the drawing indicates (point C).

EUROTUBO® Pipetting bulb This one-handed design is the simplest safety pipette filler to use available. Manufactured in natural orange rubber. Approx. drawn capacity: 25 ml. Single hand use, only two operating points. Evacuate via the automatic valve. Standard model, accommodates all pipettes. Ability to clean inside of bulb by removing patented valve and rinsing out. code

description

bag quantity

bag weight

bag volume

19200

pippeting bulb

1

0.10

0.002

B

C A

199


200

10. SAMPLE STORAGE AND CRYOGENICS


10. SAMPLE STORAGE AND CRYOGENICS

201


202

10. SAMPLE STORAGE AND CRYOGENICS Sterile cryovials Tubes made of autoclavable polypropylene. Designed for the storage of biological material at temperatures as low as -196 ºC. (Liquid Nitrogen but in gas state). Cryovials have printed graduations and feature a white marking area for sample identification. Caps and tubes have both the same coefficient of expansion, which further enhances their leakproof qualities at changing temperatures. Caps are manufactured in polyethylene* and embody a silicone o-ring that guarantees leakproof. Colour code inserts can be fitted into the caps for identification. All cryovials are certified RNAse, DNAse and pyrogen free. Cryovials are sterilized by radiation and are packaged in safety-lock bags of 100. Supplied capped. External threads: minimize liquid retention. Non skirted versions withstand centrifugation up to 17,000 g. * 10 ml cryovial (code 401410) features a polyethylene cap which does not accept inserts.

NEW

Internal threads: Non skirted versions withstand centrifugation up to 14,000 g. Cryovials with external threads: code

volume ml

skirt

dimensions mm*

case quantity

case weight

case volume

409105.1

1.2

yes

12.5 x 42

10 x 100

2.55

0.014

409103.1

2.0

no

12.5 x 47

10 x 100

2.64

0.014

409106.1

2.0

yes

12.5 x 49

10 x 100

2.64

0.014

409107

3.0

yes

12.5 x 71

10 x 100

3.79

0.021

409108

4.0

yes

12.5 x 77

10 x 100

3.90

0.028

409109

5.0

yes

12.5 x 92

10 x 100

4.58

0.028

New 401410

10.0

yes

17.0 x 84

10 x 50

2.80

0.020

case quantity

case weight

case volume

* Capped Cryovials with internal threads: dimensions mm*

code

volume ml

skirt

409001

1.2

yes

12.5 x 41

10 x 100

2.55

0.014

409002

2.0

no

12.5 x 48

10 x 100

2.64

0.014

409002.1

2.0

yes

12.5 x 49

10 x 100

2.64

0.014

409003

4.0

no

12.5 x 70

10 x 100

3.79

0.024

409003.1

4.0

yes

12.5 x 72

10 x 100

3.90

0.024

409003.2

5.0

no

12.5 x 90

10 x 100

4.58

0.024

* Capped

Colour coded inserts

Find it in page 216

Made of polypropylene. Very convenient for colour identification in freezers, on benchtops etc. Fit precisely into the caps of cryovials. They feature a little hole in order to help removing them from the cap. Not suitable for code 401410. code

colour

case quantity

case weight

case volume

409003A

blue

500

0.10

0.010

409003AM

yellow

500

0.10

0.010

409003R

red

500

0.10

0.010

409003V

green

500

0.10

0.010


10. SAMPLE STORAGE AND CRYOGENICS Non sterile cryovials with external threads Made of polypropylene. Designed for the storage and transportation of biological material. The external thread design provides a smooth and uniform inner surface, thus reducing the risk of contamination. Tubes can be autoclaved to 121º C and withstand temperatures down to –190ºC. The closures and tubes are both manufactured of polypropylene having the same coefficient of expansion, which further enhances their leakproof qualities at changing temperatures. Cryovials withstand centrifugation up to 17,000 g. Skirted tubes are not recommended for centrifugation. Available with or without graduation and white band. Caps suitable for these cryovials are supplied separately, see code 409110 and series. Cryovials printed without graduation: code

volume ml

skirt

dimensions mm*

case quantity

case weight

case volume

409102.1

1.2

yes

12.5 x 43

1,000

2.48

0.010

409104.1

2.0

no

12.5 x 48

1,000

2.57

0.010

409106.2

2.0

yes

12.5 x 49

1,000

2.68

0.010

409107.1

3.0

yes

12.5 x 72

1,000

3.77

0.020

409108.1

4.0

yes

12.5 x 76

1,000

3.82

0.020

409109.1

5.0

yes

12.5 x 93

1,000

4.46

0.020

* Capped Cryovials with graduation and band: code

volume ml

skirt

dimensions mm*

case quantity

case weight

case volume

409132

2.0

yes

12.5 x 49

1,000

2.68

0.010

409133

3.0

yes

12.5 x 72

1,000

3.77

0.010

409134

4.0

no

12.5 x 75

1,000

3.82

0.020

409135

4.0

yes

12.5 x 76

1,000

3.90

0.020

* Capped

Caps for the above tubes Made of polypropylene. Feature a long skirt and a special thread design allowing them to be removed or sealed with a single turn and assuring a better protection of the content. A silicone washer ensures a positive leakproof seal at all temperatures. Caps are made of polypropylene having the same coefficient of expansion as the above cryovials. See the previous page for colour inserts to fit into these caps. code

colour

case quantity

case weight

case volume

409110

natural

1,000

0.082

0.001

409110/1

blue

1,000

0.082

0.001

409110/4

red

1,000

0.802

0.001

Canes for cryovials Made of aluminium. Suitable for the storage of five or six 1.2 or 2.0 ml tubes in liquid nitrogen freezers such as Dewar flasks. code

dimensions

case quantity

case weight

case volume

409120

290 mm

12

0.20

0.0001

203


204

10. SAMPLE STORAGE AND CRYOGENICS Screw thread microtubes Made of autoclavable polypropylene, they can be used at extreme temperatures from -190 º C to +121º C. Certified RNAse, DNAse and Pyrogen free. Tubes and caps can be centrifuged at 17,000 g. Caps are supplied separately, see below. Dimensions: 11 x 44 mm.

4

mod.

code

volume ml

skirt

case quantity

case weight

case volume

1

409110.1

0.5

yes

1,000

1.34

0.009

2

409110.2

1.5

yes

1,000

1.34

0.009

3

409110.3

1.5

no

1,000

1.34

0.009

4

409110.4

2.0

yes

1,000

1.34

0.009

2 3 1

Caps for the above tubes 4

Made of polypropylene. Natural or opaque brown colour. Caps are available either with an attachment loop or without loop. Both models have a sealing O-ring (red) of silicone to ensure a positive leakproof seal. For sample identification, colour coding inserts can be placed upon caps (made of polypropylene). Cap dimensions: 13 x 8 mm.

2

3 1

mod.

7

5

6

code

description

case quantity

case weight

case volume

1

409007.N

cap with loop

1,000

0.40

0.003

2

409008.N

cap without loop

1,000

0.40

0.003

3

409007.M

brown cap with loop

1,000

0.40

0.003

4

409008.M

brown cap without loop

1,000

0.40

0.003

5

409111A

blue insert

500

0.58

0.003

6

409111AM

yellow insert

500

0.58

0.003

7

409111B

white insert

500

0.58

0.003

8

409111R

red insert

500

0.58

0.003

8

Screw thread opaque microtubes

3

4

Made of autoclavable opaque polypropylene. Brown colour. They can be used at extreme temperatures from -196º to +121ºC. Certified RNAse, DNAse and Pyrogen free. Resistance to centrifugation: 17,000 g. Designed to be used with light sensitive samples. The caps recommended for these tubes are codes 409007.M and 409008.M. Dimensions: 11 x 44 mm. mod.

code

volume ml

skirt

case quantity

case weight

case volume

1

409113.1

0,5

yes

1,000

1.34

0.009

2

409113.2

1,5

yes

1,000

1.34

0.009

3

409113.3

1,5

no

1,000

1.34

0.009

409113.4

2

yes

1,000

1.34

0.009

4

1

2


10. SAMPLE STORAGE AND CRYOGENICS Screw thread microtubes Made of transparent polypropylene. Suitable for use in liquid nitrogen, autoclave and for boiling applications, and can be used at temperatures down to –190 ºC. Certified RNAse, DNAse and Pyrogen free. Products ideal for long term sample storage. Withstand centrifugation at 20,000 g. The codes 409111/4 and 409111/6, with external moulded slots for better handling with gloves. Dimensions: 10.3 x 44.5 mm (except code 409111/2: 10.3 x 43.6 mm)

mod.

code

description

graduation

case quantity

case weight

case volume

°

500

0.70

0.002

500

0.60

0.002

500

0.60

0.002 New

500

0.60

0.002

500

0.60

0.002

500

0.60

0.002 New

1

409111/4

0.5 ml skirted

2

409111/2

1.5 ml

3

409111/5

1.5 ml skirted

4

409111/3

2.0 ml

5

409111/6

2.0 ml skirted

6

409111/7

2.0 ml skirted

3 °

3 °

3

1

2

3

Caps for the above tubes with o-ring Made of polypropylene of medical degree. Feature an internal O-ring to ensure leakproof seal. Dimensions 13.0 x 6.0 mm. Certified RNAse, DNAse and Pyrogen free.

4

code

colour

case quantity

case weight

case volume

409112/0

natural

500

0.024

0.0001

409112/1

blue

500

0.024

0.0001

409112/2

green

500

0.024

0.0001

409112/4

red

500

0.024

0.0001

409112/6

yellow

500

0.024

0.0001

Screw cap microtubes, with cap. Sterile Tubes and caps in medical grade, transparent polypropylene. The cap embodies a non-reactive ethylene-propylene joint. Suitable for autoclave, liquid nitrogen (gaz) and boiling processes. Perfect for long term storage. Withstand temperatures from -190 º C. Centrifugation Resistance: 20,000 g. DNAse, RNAse, DNA, PCR inhibitors and Pyrogen free. Graduated models feature a frosted area for writing. The non-graduated model incorporates an external grip for an easy handling. Microtubes are supplied capped, in bags of 50 units. code

409115/4

description 0.5 ml skirted

STERILE

409115/2 1.5 ml non skirted

STERILE

409115/6

2 ml skirted

STERILE

409115/3

2 ml non skirted

STERILE

graduation

case quantity

case weight

case volume

°

50 x 50

5.89

0.029

50 x 50

5.89

0.029

50 x 50

5.89

0.029

50 x 50

5.89

0.029

3 3 3

NEW

5

6

205


206

10. SAMPLE STORAGE AND CRYOGENICS

1 Internal obturating ring Silicone O-Ring Gripped for a better handling Tamper evident ring

2

3

Screw cap until locking ring clicks over serrated tube neck. Contents are now protected until cap is removed and tamper-evident ring is detached.

Self standing, screw thread tamper evident microtubes Microtubes and caps are made of autoclavable ultra clear polypropylene. Ribbed cap with internal silicone O-ring for a positive leakproof seal. Super fast ¼ turn thread design. Tamper evident seal which notices if microtube has been opened. Rnase, Dnase and Pyrogen free. They can be used at extreme temperatures from –196º to +121ºC. Resistance to centrifugation: 17,000 g. Microtube dimensions: 11 x 44 mm. Cap dimensions (with tamper-evident ring): 15 x 9 mm. Used on: s 4ESTOFFERTILITYAND$.!TESTING s 0ACKAGINGOFDIAGNOSTICKITSANDREAGENTS s #RIME,ABORATORIES mod.

code

volume ml

case quantity

case weight

case volume

1

409110.1T

0,5

1.000

2,06

0,013

2

409110.2T

1,5

1.000

2,06

0,013

3

409110.4T

2

1.000

2,06

0,013

See our wide range of microcentrifuge tubes on Chapter 7. Tubes and Microtubes


10. SAMPLE STORAGE AND CRYOGENICS 1

2

CRYOINSTANT: Porous beads for microbiological culture preservation CryoInstant is an excellent preservation system for storing microbiological culture (for example fungus on sporulation phase), consisting on 2 ml cryovials containing 25 porous beads and cryopreservative-added broth. With these vials we can: - Get a perfect freezing storage system. - Obtain up to 25 replicates from the original microorganism, to use them during many years - Ease the recovery of the stored strain streaking an inoculated bead directly onto solid media - Prevent changes and repetitive thawing / freezing of the rest of beads - Avoid the growth of ice when recovering, - Improve recovery rates of frozen cultures by adding cryopreservative to broth - Minimise the risk of cross contamination, - Save space in the freezers when storing. The external thread cryovials are made of polypropilene. Their smooth inner surface prevents from contamination. Their caps embody a silicone washer to ensure a positive leakproof seal. Tubes and caps withstand up to -190ºC. In order to ease the classification of the samples, we offer the possibility to get cryovials with caps and beads in five different colours: every code displays caps and beads from a single and same colour (excepting code 409113/6, which is an assortment), allowing a fast and easy identification of the samples, and providing a system whereby users are able to code different bacterial species, different samples, different laboratories,… And even more: with colour coded inserts (described on page 202) a further classification can be made. Cryovials are presented in carton boxes (resistant to –100ºC; dimensions: 150x150x55 mm) with 100 units; boxes are furtherly described in page 212. Each box is supplied plasticwrapped and labelled with code reference, batch, expiration date and specifying the colour of the caps and beads. code

beads and cap colour

case quantity

case weight

case volume

409113/1

white

100

0.22

0.001

409113/2

blue

100

0.22

0.001

409113/3

yellow

100

0.22

0.001

409113/4

red

100

0.22

0.001

409113/5

green

100

0.22

0.001

409113/6

assorted: 5 colours x 20 cryovials

100

0.22

0.001

3

4

5

6

Way of use: Take the sample from the strain with a loop (please see our loops on page 31), Inoculate the cryovial by putting the loop in contact with the broth, Close the cryovial and shake it gently in order to permeate the strain into the beads, Extract the cryopreservative-added broth with a Pasteur pipette (see our plastic pipettes on pages 191-195), 5 Close the cryovial and take it to the freezer; 6 Every time we need to reproduce the strain, we will take a bead with a loop or a forceps. 7 We will put it down on a Petri dish with culture medium, attempting to put in contact all the surface of the bead with the medium. 1 2 3 4

7

207


208

10. SAMPLE STORAGE AND CRYOGENICS

Polycarbonate racks for cryovials These racks provide ultra low temperature storage (from -196ºC to +121ºC), holding 2 or 5 ml cryovals (depending on the model). Compatible with other storage systems, they can be sterilised using autoclave protocols. They can also be immersed in liquid nitrogen, where its design means minimal issues with excess liquid on their removal.

code

M-061NA

capacity*

25

dimensions mm

max. tubes capacity

max. tubes height

75 x 75 x 52

2 ml

48

orange yellow

M-061AM M-062B

colour

81

blue 132 x 132 x 53

2 ml

case quantity

case weight

case volume

5

0.33

0.003

5

0.33

0.003

5

1.02

0.006

48

M-062R

red

5

1.02

0.006

M-063B

blue

5

1.36

0.010

81

132 x 132 x 95

5 ml

93

M-063R

red

5

1.36

0.010

M-064V

green

5

0.90

0.006

5

0.90

0.006

M-064AM

100

132 x 132 x 53

2 ml

48

yellow

* The capacity of codes M-064V and M-064AM is halved when used with capped cryovials with external threads.

Polystyrene racks for cryovials Made of polystyrene, those boxes are designed to hold 1 and 2 ml cryovials at temperatures from –80 ºC to +80 ºC. Stackable. Boxes with white base and numbered inner rack. Boxes are stackable and have air vents. Covers are keyed to the base to prevent misalignment. Each box is supplied with an innovate vial picker for easy vial removal. Dimensions: 133 x 133 x 52 mm.

code

colour

case quantity

case weight

case volume

M-036B

blue

6

1.20

0.007

M-036P

pink

6

1.20

0.007

M-036AM

yellow

6

1.20

0.007


10. SAMPLE STORAGE AND CRYOGENICS

A

C B

Polycarbonate racks for cryovials Made of extra strong polycarbonate, these boxes are designed to be used at temperatures between –190ºC and + 121ºC and are autoclavables. Racks can hold either 81 or 100 tubes from 1 ml to 5 ml. They can be immersed in liquid nitrogen. Transparent covers are printed with an alphanumerical grid. Boxes made to accept 81 tubes have a white base and a coloured grid (in which each well is numbered) (A type). Boxes made to accept 100 tubes* have a coloured base, with each place numbered in the lid, instead of a grid (B type). Each box is supplied with an innovative vial picker for easy vial removal (see C). Boxes are stackable and have air vents. Covers are keyed to the base to prevent misalignment. case quantity

colour

code

case weight

case volume

For 1.2 and 2 ml cryovials. 81 holes. Dimensions: 133 x 133 x 52 mm M-033AM

yellow

4

1.20

0.007

M-033R

red

4

1.20

0.007

M-033V

green

4

1.20

0.007

For 3.4 and 5 ml cryovials. 81 holes. Dimensions: 133 x 133 x 95 mm yellow

10

2.45

0.022

M-034R

red

10

2.45

0.022

M-034V

green

10

2.45

0.022

M-034AM

For 1.2 and 2 ml cryovials. 100 holes. Dimensions: 133 x 133 x 52 mm M-035AM

yellow

4

1.11

0.007

M-035R

red

4

1.11

0.007

M-035V

green

4

1.11

0.007

* The capacity of codes M-035AM, M-035R and M-035V, is halved when used with capped cryovials with external threads.

Polycarbonate rack for cryovials Made of polycarbonate, this box is designed to store up to 42 cryovials (10 ml, code 401410) at temperatures between –190ºC and + 121ºC. Autoclavable and stackable. Transparent cover is printed with the indication of the well number from 1 to 42. White base and blue grid, with numbered wells. They can be immersed in liquid nitrogen. Upon removal of the bath, excess liquid is discharged through vents incorporated. Cover is keyed to the base to prevent misalignment. Dimensions: 133 x 133 x 95 mm code

description

case quantity

case weight

case volume

M-036A

PC rack for 10 ml cryovials

500

0.024

0.0001

NEW

209


210

10. SAMPLE STORAGE AND CRYOGENICS Rack 9x9 height 45 Polypropylene rack. Dimensions with lid: 133 x 133 x 45 mm. Available in fluorescent colours with transparent lid to help identification. It resists -196º C and is autoclavable up to 121 C. Sections will hold 81 microtubes (0.5, 1.5 or 2 ml) or cryotubes (1.2 ml) up to 12mm diameter and 42 mm height. The capacity is reduced when storing external screw cryotubes. It embodies an alpha numeric grid printed on the base and over the upper rims for a clearer identification of samples. Ideal for our references 200400, 200401, 200405, 200407, 200410, 4092.2N, 4092.5N, 4092.6N, 4092.6NS, 409001, and series, etc.

colour

quantity

weight

volume

M-020AM

yellow

1

0.12

0.00076

M-020N

natural

1

0.12

0.00076

code

M-020R

red

1

0.12

0.00076

M-020V

green

1

0.12

0.00076

Rack 9x9 height 50 Polypropylene rack. Dimensions with lid: 133 x 133 x 53 mm. Available in fluorescent colours with transparent lid to help identification. Resists -196º C and is autoclavable up to 121 ºC. Sections will hold 81 microtubes (0.5, 1.5 or 2 ml) or cryotubes (1.2 or 2 ml) up to 12.5 mm diameter and 50 mm height. The capacity is reduced when storing external screw cryotubes. It embodies an alpha numeric grid printed on the base and over the upper rims for a clearer identification of samples. Ideal for our references 200400, 4092.2N, 4092.5N, 4092.6N, 4092.6NS, 409001, 409002, 409002.1, 409110.1, 409111/2, and series, etc. code

colour

quantity

weight

volume

U-9950CAM

yellow

1

0.15

0.00089

U-9950CN

natural

1

0.15

0.00089

U-9950CNA

orange

1

0.15

0.00089

U-9950CR

red

1

0.15

0.00089

U-9950CV

green

1

0.15

0.00089

Rack 9x9 height 95

NEW

Polypropylene rack. It can be freezed down to –196ºC, and autoclaved up to +121ºC. Dimensions with lid: 133 x 133 x 95 mm Available in fluorescent colors with translucent-transparent lid. 81 sections will hold microcontainers up to 12 mm diameter and 93 mm high: screw cap microtubes, cryovials (even those of 4 and 5 ml), snap cap microtubes, and short –medium sized tubes (codes 300500, 400500, 401100, 300300, 300800, 300800.2, 300700, 400800, 400700…).

code

colour

bag quantity

bag weight

bag volume

U-9581N

natural

1

0.31

0.0026

U-9581NB

blue

1

0.31

0.0026

U-9581AM

yellow

1

0.31

0.0026

U-9581CV

green

1

0.31

0.0026


10. SAMPLE STORAGE AND CRYOGENICS Rack 8x8 round hole height 45 Polypropylene rack, autoclavable up to 121 ºC. Dimensions with lid: 133 x 133 x 53. Available in fluorescent colours with transparent lid to help identification. Resists -196º C. Sections will hold 64 microtubes (0.5, 1.5 or 2 ml) or cryotubes (1.2 ml) up to 11 mm diameter and 42 mm height. Ideal for our references 200400, 4092.1N, 4092.1NS, 4092.2N, 4092.6N, 4092.6NS, 409111/1 and series. Alphanumeric identification. colour

quantity

weight

volume

U-8845A

blue

1

0.15

0.00076

U-8845AM

yellow

1

0.15

0.00076

U-8845N

natural

1

0.15

0.00076

U-8845V

green

1

0.15

0.00076

code

Rack 8x8 round hole height 50 Polypropylene rack, autoclavable up to 121 ºC. Dimensions with lid: 133 x 133 x 53. Available in fluorescent colours with transparent lid to help identification. Resists -196º C. Sections will hold 64 microtubes (0.5, 1.5 or 2 ml) or cryotubes (1.2 or 2 ml) up to 11 mm diameter and 50 mm height. Ideal for our references 200400, 4092.2N, 4092.5N, 4092.6N, 4092.6NS, 408003, 409110.1, 409110.2, 409110.3, 409110.4, 409110.5, 409111/1, 409111/2, 409111/3, 409111/4, 409111/5, 409111/6 and series, etc. Alphanumeric identification. code

colour

quantity

weight

volume

U-8850A

blue

1

0.15

0.00089

U-8850N

natural

1

0.15

0.00089

U-8850NA

orange

1

0.15

0.00089

Rack 7x7 height 50 Polypropylene rack, autoclavable up to 121 ºC. Dimensions with lid: 133 x 133 x 53. Available in fluorescent colours with transparent lid to help identification. Resists -196º C. Sections will hold 49 microtubes (0.5, 1.5 or 2 ml), cryotubes (1.2 or 2 ml), o low volume tubes, up to 16 mm diameter and 50 mm height. Ideal for our references 409002, 409002.1, 409104.1, 409106.1, 409106.2, etc. code

colour

quantity

weight

volume

U-7750A

blue

1

0.15

0.00089

U-7750AM

yellow

1

0.15

0.00089

U-7750N

natural

1

0.15

0.00089

U-7750NA

orange

1

0.15

0.00089

211


212

10. SAMPLE STORAGE AND CRYOGENICS

Freezing cardboard storage box, pre-assembled compartments Designed for storage and preservation of frozen samples. Made of white treated cardboard and covered by special white paper hand-stuck and hand-assembled for a better quality. Pre-assembled compartments. Resist temperatures up to -100 ºC. Ideal for microtubes and cryovials. There are alphanumeric identifications printed on each box. Suitable for the racks of freezer chests. The models M-600 and M-610 are silk screen printed on the base and lid. The other models have no printings. These box can be custom-designed made, ask to our commercial department. code

external dimensions mm

grid num.

holes mm

case quantity

case weight

case volume

M-600

150 x 150 x 55

10 x 10

12

10

2.00

0.026

M-610

150 x 150 x 100

10 x 10

12

10

3.00

0.048

M-607

134 x 134 x 47

10 x 10

10

10

4.80

0.050

M-606

134 x 134 x 57

10 x 10

10

10

4.80

0.050

M-603

134 x 134 x 75

9x9

12

10

5.00

0.050

M-604

134 x 134 x 79

9x9

12

10

5.00

0.050

Rack 10x10 height 37 Polypropylene rack. Dimensions with lid: 133 x 133 x 37 mm. Available in fluorescent colours with transparent lid to help identification. Resists -196º C and autoclavable up to 121 C. Sections will hold 100 microtubes up to 10 mm diameter and 34 mm height. Ideal for our references 4091.1N, 4092.1NS and 900117, etc. code

colour

quantity

weight

volume

U-0537A

blue

1

0.12

0.00062

U-0537N

natural

1

0.12

0.00062

U-0537NA

orange

1

0.12

0.00062


10. SAMPLE STORAGE AND CRYOGENICS

Racks with lid Polypropylene rack, autoclavable and designed for storage of samples down to -90ºC. The lid is jointed to the rack by hinges. Available in fluorescent colours. The racks are alphanumerically matrixed and are designed for 1.5 and 2 ml microtubes or 2.0 ml cryotubes; and we can supply two different models which can accommodate 50 and 100 tubes respectively. Dimensions: 71 x 153 x 53 mm (50 wells). 140 x 153 x 53 mm (100 wells). code

colour

holes

case quantity

case weight

case volume

M-500

natural

50

20

2.70

0.014

M-501

neon green

50

20

2.70

0.014

M-502

neon pink

50

20

2.70

0.014

M-503

neon yellow

50

20

2.70

0.014

M-510

natural

100

20

4.00

0.030

M-511

neon green

100

20

4.00

0.030

M-512

neon pink

100

20

4.00

0.030

M-513

neon yellow

100

20

4.00

0.030

Minimum order quantity: 5 and multiples of 5 up to 20. From 20, multiples of 20.

Rack 4x4 height 45 Polypropylene rack. Dimensions with lid: 67 x 67 x 45 mm. Available in fluorescent colors with transparent lid. It can be freezed up to –196ºC, and autoclaved up to +121ºC. 16 sections (15x15 mm) will hold screw cap microtubes (range 409110.1 for example), cryovials (as code 409001), snap cap microtubes (see codes 200400 or 4092.2N), and short tubes (codes 300500, 400500, 401100). Black color rack includes a black lid and is perfect to store light sensitive samples; it can be combined with our opaque microtubes (range 409113.1) It may be used with taller tubes as the lid lies on their caps (up to 60 mm high).

code

colour

bag quantity

bag weight

bag volume

U-4445N

natural

5

0.31

0.00001

U-4445A

blue

5

0.31

0.00001

U-4445AM

yellow

5

0.31

0.00001

U-4445NE

black

5

0.31

0.00001

NEW

213


214

10. SAMPLE STORAGE AND CRYOGENICS

m

,4 m

232

60,5 mm 66

,0

m

m

Reversible racks with removable handles Made of polypropylene, autoclavable up to 121º C. The racks have two sides for different tubes: one side holds up to 80 tubes of 12 mm diameter (for example 10 x 75 mm or 12 x 75 mm tubes, microtubes, etc.) and the other side holds up to 60 microtubes or PCR (8 mm Ø, 0.2 or 0.5 ml). By removing the handles, units can be firmly anchored laterally to one another and more units can be added on top of each other, thanks to small pins supplied with the racks.

code

colour

case quantity

case weight

case volume

M-563A

blue

10

1.60

0.008

M-563NA

orange

10

1.60

0.008

M-563P

pink

10

1.60

0.008

See our microtubes for centrifugation on chapter 7. Tubes and Microtubes

Microtube racks with lift-off telescopic lid Made of autoclavable polypropylene, those racks are designed for long-term storage of samples at temperatures down to -90ºC. Model M-450 can accommodate 50 microtubes of 0.5 ml (hole diameter 10 mm). Model M-410 can accommodate 50 microtubes of 1.5/2.0 ml (hole diameter 12 mm). Lids have a moulded-in alphanumeric location identification system with a clear centre panel for easy tube viewing. Four frosted side panels and a frosted rim on the edges of the lid provide additional labeling options.

code

dimensions mm

case quantity

case weight

case volume

M-450

120 x 60, height 45

5

0.40

0.002

M-410

140 x 73, height 42

5

0.61

0.0025


10. SAMPLE STORAGE AND CRYOGENICS

80 well racks Made of autoclavable polypropylene, those racks are designed for freezer storage and are rated to –80ºC. Racks are designed to accommodate microtubes of diameter up to 11 mm. They are space-saving, as they feature 80 wells in a 5 x 16 configuration. An alpha-numeric matrix allows accurate sample identification. Lateral handles allow easy handling of the racks. Racks can be used alone or placed into the box M-011.1 (made of translucent plastic). Racks are compatible with the Gilson FC80 dispenser, for example. dimensions mm

description

code

case quantity

case weight

case volume

M-010.1

yellow rack

225 x 65 x 27

5

0.85

0.010

M-010.2

natural rack

225 x 65 x 27

5

0.85

0.010

M-010.5

blue rack

225 x 65 x 27

5

0.85

0.010

M-010.6

red rack

225 x 65 x 27

5

0.85

0.010

M-010.7

green rack

225 x 65 x 27

5

0.85

0.010

M-011.1

box with lid

230 x 85 x 60

5

2.00

0.029

Microtube storage racks in hinged boxes Made of white polypropylene. Designed to hold 24 or 48 microtubes or cryovials of 1.5/2.0 ml sizes. Tubes are presented on four levels for better sample viewing. Each well is numbered. Model M-052 consists of one 24 hole-rack supplied in a white hinged box with transparent cover; model M-053 consists of two 24-hole racks, also housed in a white hinged box with transparent cover. Racks are removable from boxes and are stackable. They float in water bath and can incorporate dry ice for use with frozen samples on the bench. Fully autoclavable (121ºC) and freezable down to –90ºC. Dimensions: M-052: 120 x 85 x 60 mm. M-053: 235 x 85 x 60 mm. code

description

case quantity

case weight

case volume

M-052

rack for 24 microtubes

10

2.00

0.008

M-053

rack for 48 microtubes

5

1.30

0.008

215


216

10. SAMPLE STORAGE AND CRYOGENICS Incubation rack with storage box Made of tough polypropylene, this system consists of a rack housed in an hinged storage box with transparent cover. The rack is designed with 24 larger holes and 14 smaller ones, and accommodates 1.5/2.0 or 0.5 ml tubes. This floating rack has moulded-in buoys which provide exceptional stability in water baths. The rack is designed with an open bottom which allows ice in an ice bath to pack around each tube. The box can also be filled with ice and used as a self contained ice bath. A conventional use of the rack on the bench top is also possible. Will resist boiling, autoclaving and freezing. It resists from -90 to 121ºC. Dimensions: 115 x 77 x 27 mm.

code

description

case quantity

case weight

case volume

M-012.1

incubation rack with storage box

5

3.41

0.002

24 well incubation rack Made of autoclavable polypropylene. This floating rack will incubate up to 24 microtubes in a water bath and can accommodate either 1.5 ml or 0,5 ml tubes. Tubes are held snugly and then released when the rack is pressed down on a benchtop. The rack is alphanumerically labelled for better sample identification. Dimensions: 119 x 78 mm.

code

description

case quantity

case weight

case volume

M-022

incubation rack

4

0.42

0.002

Round incubation racks Made of autoclavable polypropylene, those racks are designed to hold either 8 or 20 microtubes (1.5 ml) in 10.8 mm holes. Even when the rack is fully loaded, tubes are completely immersed while tops rest above the rack, floating in a beaker of water. Perfect for use in benchtop incubation. The rack is easily unloaded by lightly pressing it down against the bench until the legs touch, releasing the tubes. Racks are 6.4 mm thick with 19 mm long legs and a central handle.

code

capacity

Ø rack

case quantity

case weight

case volume

M-024

8 tubes

66

4

0.20

0.003

M-026

20 tubes

105

4

0.20

0.003


10. SAMPLE STORAGE AND CRYOGENICS Isofreeze reversible racks with lid Manufactured from virtually unbreakable polycarbonate and filled with a non-toxic gel, those Isofreeze temperature maintenance racks provide consistent thermal protection for PCR reagents, cells, enzymes or other temperature sensitive agents when removed from the freezer or refrigerator for extended periods of time, and provide safe storage on the event of freezer failure. Each rack can accommodate up to 20 1.5/2.0 ml microtubes on one side, or 20 0.5 ml microtubes on the reverse side. Racks feature a transparent lid for better sample viewing. Each well in the rack is numbered. Available in two temperature ranges. Model M-570 (white) will maintain a temperature of 0ºC on the bench top for 5 hours. Model M-571 (blue) will maintain a temperature between –10ºC and –20ºC on the bench top up to 3 hours. Dimensions with lid: 108 x 172 x 104. code

description

case quantity

case weight

case volume

M-570

white isofreeze rack

1

1.30

0.005

M-571

blue isofreeze rack

1

1.30

0.005

8 well beta-radiation shielding rack with lid Made of acrylic resin, this 8-well rack with lid provides radiation shielding for the user against beta radiation. The rack holds two rows of four 1.5 / 2.0 ml tubes (hole diameter 12 mm). Each well is numbered for better sample identification. Dimensions: 86 x 38 x 55 mm. Hole diametre: 12 mm. code

description

case quantity

case weight

case volume

M-014.1

8 well beta-radiation shilding racks

1

0.23

0.0001

24-well beta-radiation shielding rack with lid Made of acrylic resin, this 24-well rack with lid provides radiation shielding for the user against beta radiation. The rack holds six rows of four 1.5/2.0 ml tubes (hole diameter 12 mm) plus 15 0.5 ml tubes (hole diameter 7.5 mm) in between the 24 larger holes. Each well is alphanumerically identified for better sample location. Stackable. Dimensions: 125 x 90 x 80 mm. code

description

case quantity

case weight

case volume

M-014.2

39 well beta-radiation shilding racks

1

0.75

0.001

217


218

10. SAMPLE STORAGE AND CRYOGENICS 20 well interlocking tube racks Made of blue autoclavable polypropylene. These racks slide together on both sides to allow the user to attach several for larger experiments. They are designed to accommodate 1.5/2.0 ml Eppendorf type tubes on two levels of 10 wells each, with easy-to-read numbers for better tube viewing and identification. The innovative front finger slot makes them easy to handle when working with gloves. Dimensions: 210 x 90 x 48 mm. code

description

case quantity

case weight

case volume

200420

blue 20 hole rack

6

0.42

0.005

50 well microtube racks locked in position

Made of autoclavable polypropylene, these racks are designed for use with our tubes presented on page 36 and successive. They can hold 50 tubes in a 10 x 5 configuration. These racks allow easy one handed opening and closing of tubes thanks to an innovative locking system which ensures that tubes will securely lock in each well and will not turn. Each place is identified with an alphanumeric index for better sample location. Racks have strong handles for better handling and are stackable. Dimensions: 100 x 250 x 25 mm. code

description

case quantity

case weight

case volume

M-028.5

blue rack

4

0.70

0.005

M-028.6

red rack

4

0.70

0.005

Styrofoam racks with lid Made of white heavy Styrofoam, these racks are designed for longterm storage of microtubes and cryovials in the freezer. Both racks accommodate tubes maximum 44 mm high. Diameter of the well: 13mm. Model G-050 (50 wells) is suitable for 1.5/2.0 ml microtubes and/or 1.2 ml cryovials. Dimensions: 21 x 10.7 x 6.5 cm. Model G-100 (100 wells) is suitable for 1.5/2.0 ml microtubes. Dimensions: 33.5 x 9.5 x 6.8 cm. Racks are alpha-numerically matrixed for better sample location. Stackable, light-weighted and economical.

code

description

case quantity

case weight

case volume

G-050

50 positions

10

0.50

0.043

G-100

100 positions

10

0.70

0.060


10. SAMPLE STORAGE AND CRYOGENICS Isofreeze Rack with temperature indicator

Rack at room temperature

Manufactured from polypropylene, this rack is filled with a nontoxic gel that maintains 4ºC temperature for almost three hours and a half when the rack is removed from the freezer (or in case of freezer failure), protecting PCR reagents, cells, enzymes,… from fast temperature changes. Moreover, the plastic changes its colour from green to yellow as long as the temperature of the rack changes (see figure). It can hold up to 96 0,2 ml single microtubes, strips, and plates. Dimensions with lid: 141 x 99 x 44 mm. Dimensions without lid: 141 x 99 x 38 mm. ATTENTION: Freeze for a minimum of eight hours at -20ºC before use. Keep it covered while being used. Store at the freezer while not being used Rack at -20 ºC Temperature (ºC)

Time (minutes)

code

description

case quantity

case weight

case volume

M-572

yellow-green isofreeze rack

2

0.64

0.0005

96 well PCR rack Base and cover made of autoclavable polypropylene. Designed for storing and working 0,2 ml PCR tubes, separate or in strips. 96-well plates can also be accommodated. Both base and cover have an alphanumeric identification. Once covered they are stackable. Racks can be horizontally attached to each other in order to buildup any configuration. Dimensions with cover: 132 x 91 x 32 mm It withstands from -90ºC to +121ºC.

code

description

case quantity

case weight

case volume

M-585

blue PCR rack

20

3.0

0.02

M-581

yellow PCR rack

20

3.0

0.02

Minimum order quantity: 5 and multiples of 5 up to 20. From 20, multiples of 20

219


220

10. SAMPLE STORAGE AND CRYOGENICS Reversible 32+8 microtube racks with lid This rack made of autoclavable (from -90 to +121ºC) polypropylene is supplied with a clear polypropylene lid for better sample viewing. Side one has 32 wells for 0.5ml tubes plus an additional 8 wells across for 1.5/2.0 ml tubes. Side two has the opposite configuration of 32 wells for 1.5/2.0 tubes and 8 wells for 0.5 ml tubes. Both sides are alphanumerically labeled for better sample location. Racks have frosted writing patches on all four sides for smear resistant labeling. Small side handles. Dimensions: 170 x 80 x 27 mm. code

description

case quantity

case weight

case volume

M-019AM

yellow rack

5

0.80

0.007

M-019R

pink rack

5

0.80

0.007

M-019V

green rack

5

0.80

0.007

PCR workstations Autoclavable polypropylene. This storage/working rack , with lid, is designed to work with different PCR volumes at the same time. It can accommodate up to 32 individual 0.2 ml PCR tubes, 24 1.5/2.0 ml and 16 0.5 ml microtubes. Tube wells are alpha-numerically matrixed with raised bold type for accurate sample identification. The rack also has a transparent lid for easy viewing of samples. Frosted writing panels on four sides allow labelling or writing.The rack is supplied with a removable rack accommodating 0.2 ml PCR tubes. The removable rack can be purchased separately: see product code below. Dimensions: main rack: 215 x 118 x 50 mm. Removable rack: 125 x 85 x 15 mm. Both racks withstands from -90ºC to +121ºC. code

description

case quantity

case weight

case volume

M-540

green rack

5

2.10

0.007

M-541

blue rack

5

2.10

0.007

M-542

yellow rack

5

2.10

0.007

96 well PCR racks Autoclavable polypropylene. Our 96 well plate, individual tubes or strips of 8 or 12 tubes can be used with this rack. An alphanumeric grid helps sample identification. The included lid is transparent and has a non-slip surface to allow safe storage of multiple racks. This rack can be used alone or inserted in the above workstation, codes M-540 to M-543. Dimensions: 125 x 85 x 15 mm. It withstands from -90ºC to +121ºC. code

description

case quantity

case weight

case volume

M-550

blue rack

5

0.4

0.002

M-551

yellow rack

5

0.4

0.002

M-552

pink rack

5

0.4

0.002

M-553

green rack

5

0.4

0.002


10. SAMPLE STORAGE AND CRYOGENICS Stacking PCR work up rack Autoclavable polypropylene. The stacking PCR work-up rack is a robust and convenient workstation or storage rack for plates, strips or tubes. It withstands from -90ºC to +121ºC. The conveniently small footprint ensures it is an equally useful tool whether it is used on the bench, in the freezer or some other laboratory situation. The positive click ensures the lid will not become easily dislodged. Yet only a gentle squeeze on each side will allow you to lift off the clear lid. It accommodates every different type of 0,2 ml PCR plate; including fully skirted types, strips or tubes. The imaginative shaping of the rack’s feet make this system easy to use, providing a stable platform as well as enabling stacking with or without the lid and whether the vessels are open or sealed. The racks are manufactured in distinctive colours and are packaged as an assortment. code

description

case quantity

case weight

case volume

M-554

stacking PCR rack

5

0.45

0.0005

COMBI Rack for PCR The box is made of PVC and the rack is made of autoclavable polypropylene. Rack and box can be used both together and separately. The box: can be used not only as a storage rack but also as a work station. The white base accepts both 96 and 384 well plates and a transparent cover. It is stackable, and its low height helps to save space. Lid dimensions: 108.0 x 148.6 x 35.6 mm. Box dimensions: 108.0 x 148.6 x 24.9 mm. The rack: can hold up to 96 PCR tubes or plates or 12 strips of 8 tubes with caps. Each hole is identified with an alpha numeric numbering system. It features a writing area. The grid stands on 4 legs and can be placed on a lab counter or in a refrigerator. It is stackable. Can withstand temperatures from -80ºC to +121ºC. Dimensions: 84.6 x 125.5 x 28.9 mm code

description

case quantity

case weight

case volume

M-640

white box with lid

5

0.18

0.003

M-641

96 hole blue rack

5

0.23

0.003

Reversible 96 well racks with lid Made of durable autoclavable polypropylene. This reversible rack with a clear polypropylene lid is designed with wide spacing to store up to 96 microtubes on either side. One side accommodates 1.5/2.0 ml microtubes; the reverse side accommodates 0.5 ml microtubes. The rack is alphanumerically matrixed for better sample location and has frosted writing patches on all four sides for smear resistant labelling. Operating temperature range: -90ºC to +121ºC. With ergonomical lateral handles. Dimensions: 213x114x26 mm. code

description

case quantity

case weight

case volume

M-021AM

yellow rack

5

2.05

0.008

M-021R

pink rack

5

2.05

0.008

M-021V

green rack

5

2.05

0.008

221


222

10. SAMPLE STORAGE AND CRYOGENICS Microtube racks Those easy to assemble racks are made of white autoclavable polypropylene. These racks have open sides that make them adaptable for use in a tray of crushed ice. Designed for 1.5 ml 42 (6 x 7) microtubes. Racks are supplied dismantled. Dimensions: 128 x 105 x 43 mm. code

description

case quantity

case weight

case volume

M-110

microtube racks

8

0.91

0.01

42 well cuvette rack Made of white autoclavable polypropylene, this easy to assemble rack provides gentle no-scratch support for fragile spectrophotometer cells. Forty-two 10 mm light path cells ďŹ t in this 6 x 7 row layout (See page 31). Also suitable for tubes. Racks are supplied dismantled. Dimensions: 128 x 105 x 43 mm. code

description

case quantity

case weight

case volume

M-100

well cuvette rack

8

1.04

0.01

Test tube baskets For rinsing, transport and storage. Made of autoclavable polypropylene, these baskets with sliding lids are ideal for rinsing or carrying glassware. code

description

case quantity

case weight

case volume

M-040

basket 127 x 102 x 102 mm

6

0.85

0.010

M-050

basket 152 x 152 x 152 mm

6

1.39

0.020

M-060

basket 229 x 229 x 229 mm

6

2.54

0.050

Pipette rack Made of autoclavable polypropylene. For orderly, space-saving pipette storage. This rack holds 50 pipettes in a vertical 5 x 10 arrangement. This system ensures that pipettes will not contact table surface. The end plates have handles for easy carrying. Hole diameter: 16 mm. Dimensions: 213 x 114 x 222 mm. code

description

case quantity

case weight

case volume

19973

pipette rack

6

4.22

0.050


10. SAMPLE STORAGE AND CRYOGENICS Universal racks Made of durable polypropylene, this versatile rack is specially designed to attach to another by pressing the two sides together. Two racks or more can then be attached to present tubes in varied configurations. The rack can accomodate the following: - 4 x 50 ml conical tubes, - 12 x 15 ml conical tubes, - 32 x Ø12 mm tubes or 1.5/2.0 ml microtubes, - 32 x 0.5 ml microtubes. Alpha-numeric matrix on the four sides for better sample location. Can be autoclaved and can be placed in freezers and water baths. Dimensions: 172 x 50 x 90 mm. colour

case quantity

case weight

case volume

M-520

natural

5

0.81

0.005

M-521

fluorescent blue

5

0.81

0.005

M-522

fluorescent pink

5

0.81

0.005

M-523

fluorescent yellow

5

0.81

0.005

code

Universal racks Made of autoclavable polypropylene, it withstands from -90ºC to +121ºC. This tube rack system is designed to support a variety of tube sizes and styles: - Ø 30 mm for 8 x 50 ml tubes, - Ø 20 mm for 20 tubes, - Ø 16/17 mm for 24 x 15 ml tubes, - Ø 12/13 mm for 40 tubes. Dimensions: 198 x 118 x 96 mm. colour

case quantity

case weight

case volume

M-530

fluorescent blue

5

2.10

0.010

M-531

fluorescent green

5

2.10

0.010

M-532

fluorescent pink

5

2.10

0.010

M-533

fluorescent yellow

5

2.10

0.010

code

Set of mixed Combi rack Made of autoclavable polypropylene. It withstands from -90ºC to +121ºC. This design consists of a unit of four independent cubes packaged in a clear support tray. Each rack may be independently rotated to allow the simultaneous storage and use of multiple sizes of tubes. Each side of the racks is alpha-numeric matrixed for better sample location. The following tubes can be accomodated in each rack: - 2 x 50 ml conical tubes, - 6 x 15 ml conical tubes, - 9 x 12 mm diameter tubes or 1.5/2.0 ml microtubes, - 12 x 0.5 ml microtubes. Dimensions: tray (handles included): 242 x 120 x 40 mm. Rack: 48 x 92 x 92 mm. code

description

case quantity

case weight

case volume

330

combi rack

1

0.60

0.002

223


224

10. SAMPLE STORAGE AND CRYOGENICS

Universal test tube racks Round hole test tube racks made of white autoclavable polypropylene. A side panel provides a labelling option. Very easy to assemble. Racks are supplied dismantled. Dimensions: 240 x 103 x 65 mm. code

max. diameter tubes

tube capacity

bag quantity

bag weight

bag volume

W-014

13

6 x 15 (90)

1

0.19

0.003

W-015

16

5 x 12 (60)

1

0.19

0.003

W-016

20

4 x 10 (40)

1

0.19

0.003

W-017

25

3 x 8 (24)

1

0.038

0.003

W-018

30

3 x 7 (21)

1

0.038

0.003

Square hole test tube racks with grip These high quality polypropylene racks are autoclavable, stackable when unloaded and can be dismantled for space saving. A unique grip feature ensures that tubes are ďŹ rmly held in racks. An alphanumeric grid reference ensures an easy sample location. Dimensions: 250 x 105 x 68 mm. Very easy to assemble. Racks are supplied dismantled.

code

W-011

max. diameter tube capacity tube

13

6 x 15 (90)

bag quantity

bag weight

bag volume

1

0.13

0.001

W-012

16

5 x 12 (60)

1

0.14

0.001

W-013

20

4 x 10 (40)

1

0.15

0.001


10. SAMPLE STORAGE AND CRYOGENICS

Universal test tube racks Made of white autoclavable polypropylene. Specially designed to ensure that all test tubes will be incubated at the same temperature. An alpha-numeric grid reference on top tier of the rack allows an easy sample location. Racks are easily assembled, and are stackable when unloaded. Each rack is supplied dismantled. Easy to assemble. These racks are also available in the following colours: blue (04), yellow (06) and red (10). To order simply add the colour code to product code. code

places

Ø test tube mm

dimensions mm

bag quantity

bag weight

bag volume

19563

100 (4 x 25)

micro

262 x 108 x 45

5

0.80

0.003

19564

90 (6 x 15)

13

246.5 x 104 x 60

5

0.80

0.003

19565

60 (5 x 12)

16

246.5 x 104 x 70

5

0.90

0.003

19566

40 (4 x 10)

20

246.5 x 104 x 70

5

0.90

0.003

19567

40 (4 x 10)

25

296.5 x 124 x 85

5

1.00

0.003

19568

24 (3 x 8)

30

300 x 111 x 83

5

1.00

0.003

Assembling rack This rack is moulded of blue autoclavable (121ºC) polypropylene. Suitable for daily usage and storage. It holds up to 21 tubes of 50 ml (30 mm diameter) each, and features end plates for labelling, as well as numbered and lettered rows for tube identification. Interlocking feet allows stacking of racks for storage. This rack is supplied flat, individually bagged. Fast and easy assembling (instructions included).

code

dimensions mm

rows

case quantity

case weight

case volume

19570

246 x 104 x 64

3x7

8

1.50

0.020

225


226

10. SAMPLE STORAGE AND CRYOGENICS Acetal polymer racks Made of acetal polymer. Autoclavable up 121ºC for 20 minutes. Stackable. Compact and lightweight. They remains stable if submerged. Color blue except model M-562L, which is lilac. With handles on each side for better handling. External dimensions for all codes: 293 mm x 115 mm x 65 mm H. Recommended for tubes: 12 x 75, 15 x 95, 16 x 100, centrifugation tubes, urine collection tubes, ... code

for tubes Ø

capacity

case quantity

case weight

case volume

M-560A

up to 13 mm

(6 x 14) 84

10

3.27

0.032

M-561A

up to 16 mm

(5 x 12) 60

10

3.27

0.032

M-562L

up to 30 mm

(3 x 6) 18

10

3.08

0.032

Single use racks Low-price, flexible racks made of polystyrene. Dimensions: 901407: 200 x 240 x 30 mm 901410: 160 x 170 x 25 mm code

Ø hole

nº holes

case quantity

case weight

case volume

901407

16 mm Ø

10 x 12

25

1.90

0.039

901410

13 mm Ø

10 x 10

25

0.66

0.012

Combi rack height 128 Polypropylene rack. Dimensions with lid: 133 x 133 x 128 mm. Available in fluorescent colours with transparent lid to help identification. Resist -196 C and autoclavable up to 121 ºC. Sections will hold 10 tubes up to 30 mm diameter, 2 tubes up to 16 mm Ø and 1 tube up to 11 mm Ø. All of them up to 125 mm height. Ideal for our references 300400, 300705, 300707, 300900, 300907, 300908, 301200, 301201, 301202, 301212, 301213, 301403, 301700, 400400, 400705, 400900, 401200, 401201, 401204, 401403, 401700, 409920, 713100, 716100, 716125, 720125, 429900, 429901, 429910, 429926, 429927, 810100T, 901075, 913100 and 916100, etc. colour

bag quantity

bag weight

bag volume

U-50128A

blue

1

0.20

0.0022

U-50128N

natural

1

0.20

0.0022

U-50128R

red

1

0.20

0.0022

U-50128V

green

1

0.20

0.0022

code


10. SAMPLE STORAGE AND CRYOGENICS Rack 1x1 height 45 Polypropylene rack. Dimensions with lid: 133 x 133 x 45 mm. Available in fluorescent colours with transparent lid to help identification. Resists -196º C and autoclavable up to 121 C. Only 1 cavity. Suitable for all kind of tubes and other objects. code

colour

quantity

weight

volume

U-1145A

blue

1

0.12

0.00076

U-1145AM

yellow

1

0.12

0.00076

U-1145N

natural

1

0.12

0.00076

U-1145NA

orange

1

0.12

0.00076

Rack 1x1 height 70 Polypropylene rack. Dimensions with lid: 133 x 133 x 70 mm. Available in fluorescent colours with transparent lid to help identification. Resists -196º C and autoclavable up to 121 ºC. Only one cavity. Suitable for all kind of tubes and other objects. colour

quantity

weight

volume

U-1170A

blue

1

0.18

0.00012

U-1170AM

yellow

1

0.18

0.00012

U-1170N

natural

1

0.18

0.00012

code

Rack 9x9 height 70 Polypropylene rack. Dimensions with lid: 133 x 133 x 70 mm. Available in fluorescent colours with transparent lid to help identification. Resists -196º C and autoclavable up to 121 C. Sections will hold 81 tubes up to 12 mm diameter and 67 mm height. Ideal for our references 300500 and 400500, etc. code

colour

quantity

weight

volume

U-9970A

blue

1

0.18

0.0012

U-9970N

natural

1

0.18

0.0012

U-9970R

red

1

0.18

0.0012

227


228

10. SAMPLE STORAGE AND CRYOGENICS Rack 7x7 height 80 Polypropylene rack. Dimensions with lid: 133 x 133 x 80 mm. Available in fluorescent colours with transparent lid to help identification. Resists -196º C and autoclavable up to 121 C. Sections will hold 49 tubes up to 16 mm diameter and 77 mm height. Ideal for our references 401100 and 409003.1, 409107.1, 409108.1 and other vials. code

colour

quantity

weight

volume

U-7780A

blue

1

0.18

0.0014

U-7780N

natural

1

0.18

0.0014

U-7780NA

orange

1

0.18

0.0014

U-7780V

green

1

0.18

0.0014

Rack 9x9 height 80 Polypropylene rack. Dimensions with lid: 133 x 133 x 80 mm. Available in fluorescent colours with transparent lid to help identification. Resists -196º C and autoclavable up to 121 ºC. Sections will hold 81 tubes up to 12 mm diameter and 77 mm height. Ideal for our references 300500, 400500, 409003.1, 409003.2, 409107, 409107.1, 409108, 409108.1, 801075, 801175T, 801275, 901075, 901275, etc. colour

quantity

weight

volume

U-9980A

blue

1

0.18

0.0014

U-9980N

natural

1

0.18

0.0014

U-9980NA

orange

1

0.18

0.0014

code

Rack 7x7 height 96 Polypropylene rack. Dimensions with lid: 133 x 133 x 96 mm. Available in fluorescent colours with transparent lid to help identification. Resists -196º C and autoclavable up to 121 ºC. Sections will hold 49 tubes up to 16mm diameter and 93 mm height. Ideal for tubes 16x90-92 mm or similar tubes. colour

quantity

weight

volume

U-7796A

blue

1

0.20

0.0016

U-7796V

green

1

0.20

0.0016

code


10. SAMPLE STORAGE AND CRYOGENICS Rack 9x9 height 96 Polypropylene rack. Dimensions with lid: 133 x 133 x 96 mm. Available in fluorescent colours with transparent lid to help identification. Resists -196º C and autoclavable up to 121 C. Sections will hold 81 tubes up to 12 mm diameter and 93 mm height. Ideal for our references 300700, 300700.4, 300700.5, 300700.6, 300700.7, 300701, 300702, 300704, 300800, 300800,1, 300800,2, 300801, 300804, 301500, 400700, 400800, 400800.1, 409003.1, 409003.2, 409107, 409107.1, 409108, 409108.1, 409109, 409109.1, 801275, 801175T and 901275, etc. code

colour

quantity

weight

volume

U-9996A

blue

1

0.20

0.0016

U-9996AM

yellow

1

0.20

0.0016

U-9996N

natural

1

0.20

0.0016

Rack 5x5 round hole height 105 Polypropylene rack. Dimensions with lid: 133 x 133 x 105 mm. Available in fluorescent colours with transparent lid to help identification. Resists -196º C and autoclavable up to 121ºC. Sections will hold 25 tubes up to 17 mm diameter and 102 mm height. Ideal for our references 300705, 301200, 301201, 301202, 301700, 300707, 300900, 400705, 400900, 401200, 401201, 401204, 401700, 713100, 716100, 810100T, 913100 and 916100, etc. colour

quantity

weight

volume

U-105105A

blue

1

0.20

0.0018

U-105105Y

yellow

1

0.20

0.0018

code

Rack 5x5 round hole height 128 Polypropylene rack. Dimensions with lid: 133 x 133 x 128 mm. Available in fluorescent colours with transparent lid to help identification. Resists -196º C and autoclavable up to 121 C. Sections will hold 25 tubes up to 17 mm diameter and 125 mm height. Ideal for our references 300705, 300707, 300900, 300904, 300907, 300908, 301200, 301201, 301202, 301212, 301213, 301403, 400705, 400900, 401200, 401201, 401204, 401403, 401700, 409920, 429910, 713100, 716100, 810100T, 913100 and 916100, etc. code

colour

quantity

weight

volume

U-15128A

blue

1

0.22

0.0022

U-15128AM

yellow

1

0.22

0.0022

U-15128N

natural

1

0.22

0.0022

229


230

10. SAMPLE STORAGE AND CRYOGENICS

Handmade stainless steel racks and baskets For over 25 years Deltalab has been producing a range of fine handmade stainless steel Racks and Baskets. Materials of the highest quality are used to ensure final products have top finishings and are sturdy and durable. The base of all racks and baskets are manufactured from a very strong stainless steel mesh. Handmade production enables Deltalab to manufacture Racks and Baskets customised to your own specifications. Just indicate the product size you need and Deltalab will provide a product made to your own requirements. Most racks can be manufactured with a stainless steel side identification plate upon request. Racks also available with band. Also can be made with safety lid for transport.


10. SAMPLE STORAGE AND CRYOGENICS

Aluminium racks 10 x 5 holes Stackable. Alpha-numerical index for better sample location. Supplied encased and interlocked, wrapped in a protecting film. Code Z-300 suitable for 12 ml screw tubes, series 301402, and for 15 ml centrifuge tubes, series 429900 (See Chapter of tubes) code

dimensions mm

Ø hole mm

case quantity

case weight

case volume

Z-100

165 x 85 x 45

12

10

1.10

0.0065

Z-250

195 x 100 x 45

15

10

1.40

0.0090

Z-300

220 x 110 x 45

17

10

1.70

0.0110

Aluminium racks 5 x 5 holes Stackable. Alpha-numerical index for better sample location. Supplied encased and interlocked, wrapped in a protecting film. Code Z-075 suitable for 12 ml screw tubes, series 301402, and for 15 ml centrifuge tubes, series 429900 (See Chapter of tubes) code

dimensions mm

Ø hole mm

case quantity

case weight

case volume

Z-025

35 x 85 x 45

12

10

0.60

0.0015

Z-050

100 x 100 x 45

15

10

0.75

0.0045

Z-075

110 x 110 x 45

17

10

1.00

0.0055

SUPPLIED ENCASED

Minimum unit sale: 1

Stainless steel racks 10 x 5 holes Stackable. Alpha-numerical index for better sample location. Supplied encased and interlocked, wrapped in a protecting film. Code Z-600 suitable for 12 ml screw tubes, series 301402, and for 15 ml centrifuge tubes, series 429900 (See Chapter of tubes) code

dimensions mm

Ø hole mm

case quantity

case weight

case volume

Z-500

165 x 85 x 50

12

10

3.30

0.0070

Z-550

195 x 100 x 50

15

10

3.60

0.0095

Z-600

220 x 110 x 50

17

10

4.25

0.0120

Stainless steel racks 5 x 5 holes Stackable. Alpha-numerical index for better sample location. Supplied encased and interlocked, wrapped in a protecting film. Code Z-800 suitable for 12 ml screw tubes, series 301402, and for 15 ml centrifuge tubes, series 429900 (See Chapter of tubes) code

dimensions mm

Ø hole mm

case quantity

case weight

case volume

Z-700

85 x 85 x 50

12

10

1.35

0.0035

Z-750

100 x 100 x 50

15

10

1.90

0.0050

Z-800

110 x 110 x 50

17

10

2.15

0.0060

Minimum unit sale: 1

SUPPLIED ENCASED

231


232

10. SAMPLE STORAGE AND CRYOGENICS Stainless steel racks For tubes of 12 mm Ø, hole 13 mm Ø. code

lenght x width x height mm

tubes capacity

quantity

weight

volume

F-200

155 x 155 x 35

100 (10 x 10)

1

0.150

0.0008

F-210

155 x 80 x 35

50 (10 x 5)

1

0.100

0.0004

F-240

95 x 63 x 35

24 (6 x 4)

1

0.070

0.0002

F-211

155 x 80 x 70

50 (10 x 5)

1

0.140

0.0009

Stainless steel racks For tubes of 14 mm Ø, hole 15 mm Ø. code

lenght x width x height mm

tubes capacity

quantity

weight

volume

B-200

175 x 175 x 60

100 (10 x 10)

1

0.225

0.0018

B-210

175 x 85 x 60

50 (10 x 5)

1

0.145

0.0009

B-220

353 x 90 x 60

100 (20 x 5)

1

0.270

0.0018

B-240

110 x 75 x 60

24 (6 x 4)

1

0.090

0.0005

Stainless steel racks For tubes of 18 mm Ø, hole 19 mm Ø. Codes A-202, A-212, A-222 and A-242 are suitable for 12 ml screw tubes, series 301402, and for 15 ml centrifuge tubes, series 429900 (See Chapter of tubes) code

lenght x width x height mm

tubes capacity

quantity

weight

volume

A-201

210 x 210 x 40

100 (10 x 10)

1

0.290

0.0017

A-211

210 x 110 x 40

50 (10 x 5)

1

0.185

0.0009

A-231

163 x 125 x 40

48 (8 x 6)

1

0.170

0.0008

A-241

125 x 85 x 40

24 (6 x 4)

1

0.160

0.0004

A-251

87 x 65 x 40

12 (4 x 3)

1

0.085

0.0002

A-200

210 x 210 x 60

100 (10 x 10)

1

0.306

0.0026

A-210

210 x 110 x 60

50 (10 x 5)

1

0.200

0.0013

A-230

165 x 125 x 60

48 (8 x 6)

1

0.185

0.0012

A-240

125 x 85 x 60

24 (6 x 4)

1

0.177

0.0006

A-250

87 x 65 x 60

12 (4 x 3)

1

0.100

0.0003

A-260

310 x 210 x 59

150 (15 x 10)

1

0.445

0.0040

A-202

210 x 210 x 85

100 (10 x 10)

1

0.320

0.0037

A-212

210 x 110 x 85

50 (10 x 5)

1

0.200

0.0019

A-222

415 x 110 x 85

100 (20 x 5)

1

0.335

0.0038

A-242

125 x 85 x 85

24 (6 x 4)

1

0.190

0.0009


10. SAMPLE STORAGE AND CRYOGENICS Racks for containers up to 23 mm Ø Made of stainless steel. 25 mm square holes. Features a strong woven mesh base. code

lenght x width x height mm

tubes capacity

quantity

weight

volume

D-200

265 x 265 x 85

100 (10 x 10)

1

0.425

0.0059

D-230

219 x 166 x 85

48 (8 x 6)

1

0.238

0.0030

D-240

165 x 110 x 85

24 (6 x 4)

1

0.145

0.0015

D-250

111 x 84 x 85

12 (4 x 3)

1

0.095

0.0008

Suitable for glass tubes shown on pages 139-140.

Racks for containers up to 28 mm Ø Made of stainless steel. 30 mm square holes. Features a strong woven mesh base. code

lenght x width x height mm

tubes capacity

quantity

weight

volume

C-211

315 x 160 x 60

50 (10 x 5)

1

0.280

0.0030

C-256

200 x 70 x 60

12 (6 x 2)

1

0.115

0.0008

Suitable for containers shown on pages 152-153.

Racks for containers up to 28 mm Ø Made of stainless steel. 30 mm square holes. Features a strong woven mesh base. code

lenght x width x height mm

tubes capacity

quantity

weight

volume

C-200

315 x 315 x 40

100 (10 x 10)

1

0.530

0.0040

C-254

195 x 65 x 40

12 (6 x 2)

1

0.100

0.0005

Suitable for containers shown on pages 152-153.

233


234

10. SAMPLE STORAGE AND CRYOGENICS

Racks for containers up to 30 mm Ă&#x2DC; Made of stainless steel. 33 mm square holes. Features a strong woven mesh base. code

dimensions mm

containers capacity

quantity

weight

volume

R-292

137 x 104 x 85

12 (3 x 4)

1

0,10

0,001

R-293

171 x 171 x 85

25 (5 x 5)

1

0,18

0,002

R-281

138 x 70 x 92

8 (4 x 2)

1

0,50

0,001

R-282

138 x 138 x 92

16 (4 x 4)

1

0,50

0,002

R-283

206 x 206 x 89

36 (6 x 6)

1

0,60

0,005

Suitable for containers shown on page 29. 50 ml conical tubes made of transparent polypropylene. Suitable for centrifugation. Sterile and non steril version skirted and not skirted.

You can ďŹ nd our 50ml Centrifuge tubes at Chapters 1 and 7.


10. SAMPLE STORAGE AND CRYOGENICS Racks for containers up to 38 mm Ø Stainless steel. 40 mm square holes. With a strong woven mesh base. code

lenght x width x height mm

containers capacity

quantity

weight

volume

L-250

168 x 128 x 43

12 (4 x 3)

1

0.140

0.0009

L-240

255 x 170 x 43

24 (6 x 4)

1

0.246

0.0019

Suitable for containers shown on pages 154-155.

Racks for containers up to 47 mm Ø Stainless steel. 50 mm square holes. With a strong woven mesh base. code

lenght x width x height mm

containers capacity

quantity

weight

volume

I-240

315 x 210 x 45

24 (6 x 4)

1

0.325

0.0029

I-250

210 x 160 x 45

12 (4 x 3)

1

0.192

0.0015

Suitable for containers shown on pages 156-157.

Racks for containers up to 58 mm Ø Stainless steel. 63 mm square holes. code

lenght x width x height mm

containers capacity

quantity

weight

volume

N-240

393 x 262 x 45

24 (6 x 4)

1

0.450

0.0046

N-250

393 x 132 x 45

12 (6 x 2)

1

0.282

0.0023

Suitable for containers shown on pages 158, 159, 160 and 161.

Racks for containers up to 58 ml Ø, with lid Made of stainless steel with a lid. Hole of 63 mm. Ideal for carrying containers, as they stand firmly in the rack thanks to the lid. code

lenght x width x height mm

containers capacity

quantity

weight

volume

NT-250

392 x 131 x 80

12 (6 x 2)

1

0.40

0.004

Suitable for containers shown on pages 158, 159, 160 and 161.

235


236

10. SAMPLE STORAGE AND CRYOGENICS Bottle carrier with folding handlers Manufactured in stainless steel and designed for the transport of six 1 liter bottles such as chemical reagent bottles. See our range of bottles and containers in section 14. code

dimensions mm

quantity

weight

volume

19700

380 x 240 x130

1

0.35

0.018

Baskets with folding handles Made of stainless steel. Features a strong woven mesh base. For bottles and containers. code

dimensions mm

quantity

weight

volume

With dividers every 12 cm. 4 departments H-261

480 x 300 x 150

1

1.84

0.021

480 x 298 x 150

1

1.18

0.021

Without dividers H-260

Instrument trays Made of stainless steel thick woven mesh. Reinforced construction to withstand weight. With not folding handles. code

dimensions mm

quantity

weight

volume

T-200

367 x 238 x 77

1

0.98

0.0070

T-210

360 x 260 x 80

1

1.12

0.0075


10. SAMPLE STORAGE AND CRYOGENICS Baskets for autoclave Stackable baskets made of stainless steel. code

dimensions mm

quantity

weight

volume

H-290

470 x 300 x 200

1

1.095

0.0285

H-295

570 x 300 x 200

1

1.228

0.0345

H-285

570 x 300 x 150

1

0.860

0.0256

Square baskets with optional lid Made of stainless steel. Feature a strong woven mesh base. Baskets have a folding handle for more convenience and are available with or without lid. To order baskets with lids, simply add T to the end of product code (ex: H-200T to order the ďŹ rst model with a lid). Minimum order quantity: 5 units. Other models with internal divisions are available on request. Please ask our commercial department for more details. code

dimensions mm

quantity

weight

volume

H-200

118 x 118 x 144

1

0.252

0.0020

H-210

160 x 160 x 140

1

0.324

0.0035

H-215

139 x 139 x 139

1

0.270

0.0027

H-220

210 x 210 x 180

1

0.524

0.0080

H-240

300 x 300 x 200

1

0.778

0.0180

Round baskets with lid Made of stainless steel, the base of these baskets is reinforced by a thick stainless steel mesh for added strength. Baskets feature a folding handle for more convenience. Other models with inner crossed dividers are available on request. Please ask our commercial department for more details. code

height mm

diameter mm

quantity

weight

volume

R-200

125

150

1

0.265

0.0020

R-215

150

200

1

0.350

0.0035

R-220

200

200

1

0.528

0.0040

R-230

180

208

1

0.550

0.0040

R-240

180

230

1

0.560

0.0040

R-250

180

240

1

0.570

0.0045

237


238

10. SAMPLE STORAGE AND CRYOGENICS Stainless steel basket for blood collection Manufactured in stainless steel. Ideal to collect blood samples at hospital chambers, and carry them to and inside the laboratory. The basket includes: A-295, rack for 64, 10ml tubes (95 x 15 mm). Picture A B-240, rack for 24, 5 ml tubes (75 x 12 mm). Picture B A-261, rack for 28, 5 ml tubes (50 x 15 mm flat bottom). Picture C CP-24, small-sized basket for 24 slides vertically placed. Picture D

code

description

dimensions mm

quantity

weight

volume

H-401

basket with racks

340 x 290 x 85

1

1.340

0.0083

Code H-401 is compound of:

B A

C D Racks are supplied with no tubes nor slides.

Plastic tray for blood collection tubes Made of sturdy autoclavable polypropylene. Colour: white Ideal to carry material from lab to patient. Designed for flexibility and versatility, this tray can be arranged to meet your specific needs. It includes two 40-place test tube supports (for tubes up to Ø 16 mm) and one 18-place slide holder (for 76 x 26 mm slides), a large requisition section, and adjustable partitions to hold varied materials. The handle is formed by an end mounted, detachable loop that is 178 mm high. code

dimensions mm

quantity

weight

volume

M-300

356 x 292 x 51

1

0.26

0.030


10. SAMPLE STORAGE AND CRYOGENICS Racks for bags Made of stainless steel, specially designed for Stomacher type homogeneizer bags. Dimensions 390 x 200 x 240 mm. See bags on chapter 15. code

description

quantity

weight

volume

15006

rack for 14 bags

1

1.1

0.140

15007

clips to adjust bags

10

0.2

0.001

Customer - designed models can be produced

Petri dish baskets These stainless steel baskets are suitable for dishes of diameter up to 10 cm. Two models available to hold 10 or 20 Petri dishes. description

code

dimensions mm handle mm case case case (height without height quantity weight volume handle)

1 section, holds up to 10 dishes 2 sections, holds up to 20 dishes

H-600 H-601

110x105x250

105

1

0.10

0.003

215x105x250

100

1

0.20

0.006

See more Petri dish baskets in pages 84 and 85

Staining baskets and racks for slides Made of stainless steel. Autoclavable staining baskets. Designed for 76 x 26 mm slides. code

CP-30 H CP-45 H C-45 CP-24 CP-30 CP-50

description basket for 30 horizontal slides basket for 45 horizontal sides glass tray with lid basket for 24 vertical basket for 30 vertical basket for 50 vertical

dimensions mm

quantity

weight

volume

172 x 86

1

0.150

0.0011

235 x 85

1

0.186

0.0015

253 x 93

1

0.400

0.0017

70 x 70

1

0.095

0.0003

70 x 90

1

0.110

0.0004

70 x 132

1

0.140

0.0008

Stainings racks for microscope slides Made of stainless steel. code

S-004 S-002 S-003

description

quantity

weight

volume

for 12 slides lenght: 435 width: 85 for 24 slides lenght: 435 width: 175 without divisions lenght: 435 width: 85

1

0.210

0.0020

1

0.410

0.0030

1

0.170

0.0020

See other staining system in Chapter 5. Microscopy and Staining

239


240

11. SAFETY


11. SAFETY

241


242

11. SAFETY

3

1

2

3

4

4

5

Safety containers Containers manufactured with virgin raw materials enabling incineration; four and six liters containers are made in autoclavable polypropylene, the rest in polyethylene. Suitable for solid waste type II and III. They are compound by a body bearing the hazard warning label, and two lids: - The first offers an entire opening, taking advantage of the total diameter of the mouth of the container; very useful to throw away bigger volume waste. May be closed hermetically and definitively. - The secondary one presents a partial opening, which may be closed temporarily or definitively. It embodies two devices in order to easy the extraction/disconnection of dental and analytical needles, and a 70 x 42 mm rectangular orifice. All containers, excepting code 241500, embody a handle. In accordance with major European and international standards (ONU ADR, ISO 6706, BS 5404, etc...) mod.

code

1

capacity l

material (body and lid)

Ø mouth mm

Ø base mm

height mm

case quantity

case weight

case volume

pallet quantity

241500

1.5

PE

148

122

134

60

10.3

0.120

720

2

242000

2.0

PE

148

122

162

60

10.1

0.116

720

3

244000

4.0

PP

121º C

195

175

172

40

11.7

0.147

480

121º C

4

246000

6.0

PP

5

240007

7.0

PE

220

193

201

20

7.8

0.146

240

210

178

240

20

8.9

0.144

240

Needle collection container Made of high density polyethylene. Instructions for use (in English and Spanish) are printed on the containers. Suitable for waste type III. Capacity: 1 liter. It features two caps. The first one has a mouth which embodies three different devices to remove needles. The other one is designed to close the container temporarily or definitively. Can be incinerated without release of toxic fumes, like all our containers. code

colour

dimensions mm

241400

yellow

241400R

red

Ø mouth 70; Ø base 100; height with cap 173 Ø mouth 70; Ø base 100; height with cap 173

case quantity

case weight

case volume

76

7.9

0.15

76

7.9

0.15


11. SAFETY

1

2

3

Safety containers These containers are manufactured in virgin raw materials enabling incineration. Suitable for solid waste type II and III. They are compound by a body bearing the hazard warning label, a handle, and two lids, allowing two using options: - Total opening, taking advantage of the total diameter of the mouth of the container; very useful to throw away bigger volume waste. - Partial opening, 120 mm diameter, usable for syringes, contact plates, and midsize waste. In accordance with ONU ADR, ISO 6706, BS 5404 standards and major European standards. mod.

code

capacity l

material (body and lid)

Ø mouth mm

Ø base mm

height mm

sales unit

sel.ut. weight

sel.ut. volume

pallet quantity

1

240011

11

PE PP

260

226

255

10

5.5

0.058

400

2

240021

20

PE PP

323

277

328

10

10.2

0.094

185

3

240028

25

PE PE

323

283

387

10

11.1

0.145

130

Safety labelling Permanent adhesion labelling to alert from risk or danger. Labels are shiny and fluorescent. In compliance with international safety standards. Recommendable temperature of use: - Codes 901531, 901533: from -50ºC to +105ºC - Code 901538: from + 4ºC to +105ºC mod.

code

1

901531

description

2

901533

roll of 500 labels (labels size 25 x 25 mm) bag of 10 units 200 x 250 mm

3

901538

roll of 13 m x 25 mm

3

bag weight

bag volume

bag quantity

1

0.50

0.001

10

0.06

0.001

1

0.20

0.001

1

2

243


244

11. SAFETY

8

3

7

4

2

6

1

5

Safety containers

A mod. 1, 4

B mod. 2

C mod. 3

Manufactured in polypropylene, they are also shockproof, perforation and solvents resistant, and can be incinerated. Two ways of locking: provisional; and permanent. Autoclavables. Portable models 260000 and 232806 are designed to be easy opened and closed with just one hand. 1. 232810, 0.20 l. capacity. Approximate capacity for 100 needles. Suitable for needles and lancets. Device type A. Easy opening and closure with just one hand. 2. 260000, 0.45 l capacity. Designed for those people who need regular injections and have to carry a needle container. With a device type B and a handle. Black colour. 3. 232811, 0.45 l capacity. Similar to the previous model, but in yellow colour, and featuring device C. 4. 232806, 0.6 l capacity. Usable for insulin needles, it is also right for complete syringes. Features a device type A and a handle on one side. 5. 232809, 1 l capacity. Suitable in places where waste quantity to be disposed of is small. With a handle and devices A and C. 6. 232808, 2 l capacity. Features devices type D. 7. 232801, 4 l capacity. The most used container for discarding residues in general. Embodies devices type D and a handle. 8. 232802, 7 l capacity. Its height makes it ideal for contaminated pipettes. With devices type D. All models, excepting 232810, 232811, 260000, and 232806, embody a socket to place needle caps in vertical position. Manufactured pursuant to ISO 9001, all of them are in accordance with ADR (UN). Excepting portable models (260000, and 232806) the others are also in accordance with BS 7320 and AFNOR NF X 30 500 standards. These models are constantly updated; design can be slightly modiďŹ ed. Suitable for solid waste type II and III. mod.

A+C mod. 5

code

capacity l

container dimensions mm

opening devices

useful container case capacity l weight g quantity

case weight

case volume

NEW 1

232810

0.20

79 x 37 x 146

A

0.20

64

100

6.2

0.042

2

260000

0.45

105 x 50 x 167

B

0.35

88

100

10.0

0.078

NEW 3

232811

0.45

105 x 50 x 167

C

0.35

88

100

10.0

0.078

4

232806

0.60

110 x 55 x 220

A

0.47

112

100

12.3

0.112

5

232809

1.00

107 x 90 x 190

A+C

0.81

125

100

13.7

0.095

6

232808

2.00

195 x 120 x 170

D

1.60

216

50

12.5

0.080

7

232801

4.00

175 x 175 x 248

D

3.00

310

50

13.7

0.157

8

232802

7.00

175 x 175 x 382

D

5.60

434

50

22.4

0.209

DEVICES:

D mod. 6, 7, 8

A. Oval aperture for syringes and lancets. B. Removal of needles with non return system. C. Removal of luerlock, luerslip and pen needles. D. Five kinds of aperture: an a wide one to discard elements of medium size; another one designed to remove scalpel blades; one to remove luerlock and blood collection systems; to remove butterďŹ&#x201A;y and luerslip needles and the last one for insulin pen.


11. SAFETY

1

2

3

4

Cardboard waste containers Cardboard containers with lid, designed for storage and disposal of group II solid and semi-solid waste. With an integrated low density polyethylene bag (stuck in their interior). They can be incinerated without release of toxic fumes. The lid features two seals. One temporary that will avoid unpleasant smells and eliminate the risk of contamination while using the container. The second one is a definitive, positive seal: closing the bag with a belt already included, sealing the lids, and reinforcing them with an adhesive tape. These containers embody lateral handles. Model 3, code 250050, 50 l capacity, is made of cardboard 2.7 mm minimal thick. PEBD 60 μ bag, adhered to the base and the walls. Its height allows users not to need to lean forward as they throw away waste. Easy to assemble thanks to its auto-mountable bottom. A maximum filling line is printed on its body. Model 4, code 270045, 50 l capacity, is manufactured in reinforced cardboard, double thickness (4 mm minimum). PEBD bag 54 μ adhered to the base. Safe closure with the help of raised edges. Both are printed with the biohazard anagram and text; assembling and closing instructions and drawings; identification formulary, and standards. In accordance with UN ADR (road transport), and manufactured pursuant to ISO 9001 standards. Containers are supplied folded up for space-saving. Those containers are not suitable for needle disposal. For this purpose see the special containers on previous pages. mod.

code

capacity l

container dimensions mm

maximum load kg

weight ut. g

pallet dimensions

pallet weight

3

250050

50

263 x 263 x 756

12.5

642

100 x 120 x 180

40 x 10

4

270045

50

290 x 377 x 490

18.0

930

120 x 100 x 220

300

Minimum order quantity: 20 units (it is recommended to order the whole pallet to avoid to dirty the boxes).

Rectangular waste containers Made of yellow, perforation resistant, virgin polypropylene. Suitable for solid or semi-solid waste, II and III Groups. Lids feature a central handle for a better handling in the daily use and also while carrying containers. Secure closure thanks to their fourteen closing points. Lateral handles for further help carrying. Can be incinerated with no release of toxic fumes. Stackable when empty, or full and closed. Minimum wall thickness: 2.5 mm. In accordance with UN ADR and AFNOR NF X30 500. Manufactured following ISO 9002 and ISO 14001.

mod

code

capacity l

container dimensions maximum load mm (ADR) kg

1

240035

30

415 x 314 x 373

2

240065

60

415 x 314 x 575

Minimum order quantity: code 240035 : 10 units, code 240065: 5 units.

weight ut. g

pallet dimensions

pallet weight

14

1,400

80 x 120 x 200

130

25

2,000

80 x 120 x 200

115

245


246

11. SAFETY Bags for Autoclave Printed with the biohazard graphic symbol and instructions of use in five languages. Do not close the bags hermetically when placing them in the autoclave. code

dimensions cm

tickness microns

case quantity

case weight

case volume

200100

50 x 75

30

100

1.80

0.004

200310

30 x 60

35

500

5.90

0.023

200311

40 x 75

40

300

6.60

0.019

200312

60 x 75

40

200

7.10

0.019

6.40

0.019

40 100 75 x 90 NEW 200318 We can print these bags with your logotype. (Minimum order quantity: 50.000 pieces.)

Autoclave resistant red bags Heavy duty, high impact biohazard bags made of a 0.055 mm thick high molecular weight polypropylene blend. They are autoclavable to 138ºC, saving autoclave time. Bags printed with the standard biohazard warning symbol and precautionary procedures in four languages: English, Spanish, French and German. They feature a sterilization indicator patch that darkens when exposed to steam sterilization. Do not close the bags hermetically when placing them in the autoclave. code

dimensions cm

volume l

case quantity

case weight

case volume

200320

48 x 58

24.4

200

5.10

0.011

200321

65 x 91

75.1

200

10.14

0.020

200322

78 x 96

121.0

200

13.25

0.020

Bottles for sterilization Made of soda glass 3.3. Autoclavable up to 140ºC. Graduations printed in white colour. Screw caps made of blue polypropylene. Ribbed screw caps for a better handling. Drip ring on bottle neck to avoid dripping. Ideal for chemical reagents and culture media. capac. ml

screw

Ø ext. mm

height mm

case quantity

case weight

case volume

402001

100

GL45

56

100

10

1.74

0.005

402002

250

GL45

70

138

10

2.60

0.009

402005

500

GL45

86

176

10

3.86

0.016

402010

1,000

GL45

101

225

10

6.12

0.029

402020

2,000

GL45

136

260

10

10.54

0.059

code


11. SAFETY Sterilization indicator strips Multiparameter, chemical indicator strips designed to monitor exposure to steam or EO sterilization. Consist on a 1.8 x 15.6 cm paper strip, printed with a long strip of indicator ink which provides a visual color change to verify that the sterilant has penetrated into the pack and conďŹ rm that sufďŹ cient exposure conditions have occurred. Class 5 indicators according to EN ISO 11140-1. Code 191030: for Ethylene Oxyde (EO gas) Printed ink changes from pink to blue (see A) while exposure to different parameters: gas concentration, duration, temperature and relative humidity. Code 191031: for Steam (moist heat) Ink changes form purple to green (see B) while exposure to different parameters: time, temperature and saturated steam. It can monitor different steam sterilization cycles (15 minutes at 121ÂşC; or 3.5 minutes at 141ÂşC). Case with 200 strips that can be can be easily separated in two short strips at the perforation mark. It enables: -A complete strip may be used when a conďŹ rmation of the sterilization process is required for the sterilization records. After sterilization the strip is divided, so one short strip goes with the sterilized stuff, and the other remains with the documentation. -If no records are required, the strip can then be divided, so the user obtains 400 individual tests. mod.

code

1

191030

2

191031

description EO sterilization indicator strip Steam sterilization indicator strip

case quantity

case weight

case volume

200

0.57

0.0001

200

0.57

0.0001

Sterilization indicator tapes Self-adhesive sterilisation indicator tapes made of semicreped paper. It sticks on different surfaces such as plastic, metal, fabrics, paper, cardboard... Thickness range from 0.15 mm to 0.17 mm depending on the model. Tape will remain afďŹ xed for 18 months. 191050: indicator for sterilisation by ethylene oxide gas. The word GAS printed in brown changes to green once it has been sterilized. Following the speciďŹ cations: sEXPOSITIONTOMGL%/AND2(FORMINIMUMMINAT 30ÂşC sEXPOSITIONTO%/AND2(FORMINIMUMMINATÂ&#x17D;# 191051: indicator for sterilisation with poupinel method (dry heat). The green strips turn to brown by the effect of time and temperature as per the following speciďŹ cation: sEXPOSITIONAMINIMUMMINATÂ&#x17D;#ORMOREINDRYAIR 191052: indicator for sterilisation with steam. The white strips turn to dark brown by the effect of time, temperature and saturated steam as per the following speciďŹ cation: sEXPOSITIONATÂ&#x17D;#FORMIN sEXPOSITIONATÂ&#x17D;#FORMIN type of sterilisation

lenght. mm

width mm

case quantity

case weight

case volume

50

19

8

1.06

0.0048

191051

ethylene oxyde gas dry heat (poupinel)

50

19

8

1.06

0.0048

191052

autoclave

50

19

8

1.06

0.0048

mod.

code

1

191050

2 3

Sterilization indicator tapes For steam autoclave. Resistance to cold: -40ÂşC. Model 1: The tape has printed on it CONTAMINATED. After sterilisation to +121 ÂşC the word STERILIZED appears. Model 2: The tape has printed on it â&#x20AC;&#x201C;Batch, â&#x20AC;&#x201C;Con. (Control) and â&#x20AC;&#x201C;Date. After sterilisation to +121 ÂşC the word STERILIZED appears.

mod.

code

descrtiption

case quantity

case weight

case volume

1

191222

roll of 19 mm x 13 m

8

0.80

0.0004

2

191223

roll of 19 mm x 13 m

8

0.80

0.0004

NEW

2 1

A

B

247


248

11. SAFETY Coloured adhesive tapes for sample identification Ideal for use in freezers, autoclaves, etc... Peel off without leaving a sticky residue. Withstand temperatures from –50ºC to +130ºC. High resistance to oils, acids, water etc... Suitable for glass, plastic, paper, metal and rubber surfaces. Can be marked with pencil, ball-point pen ... Tape roll inside diameter: 13 m rolls: 26 mm, 55 m rolls: 76 mm. All tape models are 19 mm wide. The code 191220 is a 12 roll tape metal dispenser that accepts 13 m rolls. code

colour

tape length m

case quantity

case weight

case volume

191221/1

white

13

16

0.64

0.001

191221/2

red

13

16

0.64

0.001

191221/3

yellow

13

16

0.64

0.001

191221/4

green

13

16

0.64

0.001

191221/5

orange

13

16

0.64

0.001

191221/6

blue

13

16

0.64

0.001

191221.1

white

55

12

1.25

0.001

191221.2

red

55

12

1.25

0.001

191221.3

yellow

55

12

1.25

0.001

191221.4

green

55

12

1.25

0.001

191221.5

orange

55

12

1.25

0.001

191221.6

blue

55

12

1.25

0.001

191220

dispenser

-

1

1.07

0.005

Minimum order quantity: 1

Adhesive labels White colour. code

description

bag quantity

bag weight

bag volume

901031

54 x 36 mm printed

2 x 5,000

1.20

0.010

901031.2

54 x 36 mm plain

2 x 5,000

1.20

0.010

901041

50 x 30 mm printed

1 x 10,000

1.20

0.010

901016

50 x 30 mm plain

1 x 10,000

1.20

0.010

901030

35 x 25 mm printed

1 x 7,000

1.20

0.010

Pipetting bulb Made of rubber. Used to avoid mouth pipetting and contamination risk. Can be opened, cleaned and autoclaved. Ideal for Wintrobe and Westergren pipettes. code

description

bag quantity

bag weight

bag volume

19201

red pippeting bulb

1

0.10

0.001


11. SAFETY

1. Evacuate the 2. Intake by air by pressing pressing on the bulb, as the point B drawing indicates.

3. Drain the liquid by pressing on point A

4. Blow out the pipette by pressing as the drawing indicates (point C).

EUROTUBO® Pipetting bulb This one-handed design is the simplest safety pipette filler to use available. Manufactured in natural orange rubber. Approx. drawn capacity: 25 ml. Single hand use, only two operating points. Evacuate via the automatic valve. Standard model, accommodates all pipettes. Ability to clean inside of bulb by removing patented valve and rinsing out. code

description

bag quantity

bag weight

bag volume

19200

pippeting bulb

1

0.10

0.002

Pipette pumps Several models for various pipette volumes. Designed for fast and efficient pipetting with simple, one handed operation. Pipettes fit smoothly into collar. Rotate the knurled thumb wheel on the side for precision filling or dispensing, and press the fast release lever for quick emptying. Easy to use and easily disassembled for cleaning. Sizes are colour coded. Pipette pumps resist acids and alkalies.

code

description

colour

bag quantity

bag weight

bag volume

W-100

up to 2 ml

blue

1

0.05

0.0001

W-110

up to 10 ml

green

1

0.05

0.0001

W-120

up to 25 ml

red

1

0.05

0.0001

Pipette pump support rack Made of acrylic resin and designed to keep in position 4 pipette pumps. Suitable for the above pipette pumps. code

dimensions mm

bag quantity

bag weight

bag volume

W-150

109 x 208 x 144

1

0.45

0.004

B

C A

249


250

11. SAFETY c (PPE)

Safety glasses Made of polycarbonate (1 mm thickness). Scratch resistant, antifogging, antistatic lenses. Protect against UV rays. With lateral vents. Conform to EN 166 standard. code

description

quantity

weight

volume

19385

glasses

5

0.34

0.005

c (PPE)

Safety glasses

Made of polycarbonate (2 mm thickness). Can be worn over conventional corrective glasses. Conform to EN 166, EN 167, EN 168, EN 169, EN 170, EN 171, y EN 172. standard. code

description

quantity

weight

volume

19386

glasses

6

0.34

0.005

Emergency eyewash bottle Made of low density polyethylene, the bottle is ďŹ&#x201A;exible and easy to squeeze. The bottle has an eyecup with a snap-on cap. The eyecup has a perforated plate to break up the stream providing a gentle spray to the eye. A capped air vent valve prevents drawback of contaminated eye wash into bottle. Contaminated wash exits through a drain tube, which rotates in any direction. Instructions for use printed in various languages. Bottle capacity: 1 l. Supplied empty. code

capacity ml

case quantity

case weight

case volume

19384

1,000

1

0.30

0.030

Emergency eyewash bottle with holder Made of low density polyethylene, the bottle is ďŹ&#x201A;exible and easy to squeeze. The bottle features an eyecup with a cap. The eyecup has a perforated plate to break up the stream providing a gentle spray to the eye. Contaminated eyewash drips into the container attached to the cap, thus preventing any liquid from entering the bottle. Includes a green 440 x 370 mm polystyrene holder. Supplied with screws. Bottle capacity: 1 l. Instructions for use enclosed. Supplied empty. code

capacity ml

case quantity

case weight

case volume

19387

1,000

1

0.87

0.028


11. SAFETY

Wash bottles Made a combination of high and low density polyethylene. Transluscent bottle, with HDPE cap (blue), delivery tube and seal cap (natural). Bottle caps are ribbed for a better handling. High resistance to all liquids, acids and bases. Include a large neck for safe and easy filling.

code

capac. ml

neck mm

base mm

height case mm quantity

case weight

case volume

44330000

250

30

65

155

90

7.50

0.090

44300000

500

30

75

185

60

5.50

0.090

44310000

1,000

30

90

222

45

6.00

0.120

Wide mouth wash bottles Transluscent polyethylene bottles, with screw cap and delivery tube available in 3 different colours (blue, yellow and red) for easy identification. Feature a one piece cap and delivery tube assembly, thus eliminating air or liquid absorption through the cap. Include a wide neck for safe and easy filling. Ribbed caps for a better handling while opening and closing. Moulded-in graduations. 250 ml model is graduated in 25 ml increments, 500 ml model, in 100 ml increments. code

capac. ml

neck mm

base mm

height case mm quantity

191637

250

40

60

140

191638

500

40

75

165

case weight

case volume

10

0.80

0.014

10

0.90

0.016

Please indicate required cap colour: (04) blue, (06) yellow, (10) red.

Integral wash bottles Made of transluscent polyethylene. Feature a one piece cap and delivery tube assembly, which eliminates air or liquid absorption through the cap and ensures a positive leaktight seal. To increase liquid flow, cut the tip of the delivery tube; close the tip by means of the cap attached to the delivery tube. Caps are ribbed for a better handling while opening and closing. Tagging points on neck and cap for a tamper proof closure. Bottles include a fill in line. code

capac. ml

height mm

neck d/n std.

case quantity

case weight

case volume

191633

250

143

GL32

10

0.65

0.008

191634

500

181

GL32

10

0.80

0.015

251


252

11. SAFETY c (MDD)

Wood tongue depressors

Tongue depressor with smooth rounded edges. Made from highquality wood to provide a smooth, splinter-free ďŹ nish. Odour and taste-free. Maintains a high tensile strength. In addition to their traditional use, depressors can be used for spreading balms and ointments, for stirring liquids or mixing medicine, etc... The sterile models are supplied with â&#x20AC;&#x153;instructions for useâ&#x20AC;?. Adult size 15 x 1.8 cm. Children size 11.5 x 1 cm. description

case quantity

adult

non sterile

50 x 100

15.50

0.039

40

adult

ethylene oxyde sterilized ďŹ&#x201A;ow-pack

4 x 500

12.30

0.066

27

100 x 100 15.00

0.032

40

code

size

441142 441242.2

441142.0 children

non sterile

case weight

case volume

cases per pallet

Sterile models are supplied with â&#x20AC;&#x153;instructions for useâ&#x20AC;?.

c (MDD)

Plastic tongue depressors

Made of polystyrene. Colour: cream. Tongue depressor with smooth rounded edges. Odour and taste-free. Maintains a high tensile strength. More ďŹ&#x201A;exible than wood depressors. Features a ribbed ďŹ nger rest for easy handling. In addition to their traditional use, depressors can be used for spreading balms and ointments, for stirring liquids or mixing medicine, etc... Size: 16 x 2 cm. description

case quantity

441142.1

non sterile

441142.2

ethylene oxyde sterilized ďŹ&#x201A;ow-pack

code

case weight

case volume

cases per pallet

6 x 250

8.70

0.014

108

4 x 500

12.66

0.066

27

Sterile models are supplied with â&#x20AC;&#x153;instuctions for useâ&#x20AC;?.

Absorbent paper This 120 gsm absorbent paper provides a total protection thanks to its two layers. The top side consists of a layer of cellulose of great liquid absorption power; the reverse side consists of a layer of polyethylene ensuring that it is completely waterproof. For use in the following applications: sLABORATORYTRAYSANDTABLESPROTECTION

sPATHOLOGICALANATOMYLABORATORIES

sSEEDGERMINATIONBETWEEN PAPERMETHOD

sSPILLAGERECOVERINGUSINGITSLEAKTIGHTSURFACE

sPARTICULARLYSUITABLEFORWORKINGWITHMATERIALSTHATAREVALUABLE (precious metals) or hazardous (toxic or corrosive materials). Paper thickness: 0.244 mm. Absorption: 170 g/m2. Klemm absorption: 86 mm. code

description

case quantity

case weight

case volume

120003

50 m x 50 cm reel

1 reel

5.00

0.0165

120002

50 x 50 cm sheets

1x100 sheets

2.90

0.005

Filter paper Our range of ďŹ lter paper reams is made from high quality cellulose ďŹ bres to ensure a good resistance to humidity and a high absorption capacity. Pore diameter: +/- 30-40 microns. For use in the following applications: sLABORATORYWORKTOPPROTECTION

sSIMPLElLTERINGOPERATIONSFORVARIEDPRODUCTS

sLABWARESTERILISATION

sPHARMACEUTICALPRODUCTPREPARATION code

sheet size cm

120010 50 x 50 cm

grammage

73 g

thickness Klemm case mm absorp. (mm) quantity

0.151

89

1x100 sheets

case weight

case volume

1.85

0.005


11. SAFETY Concentrated deodorant Nilodor ScientiďŹ cally elaborated concentrated deodorant. Ideal for hospitals (in microbiology, autopsy and oncology applications), veterinary clinics, private homes and farms to avoid unpleasant smells from animals. This product does not cover odours. On the contrary it quickly NEUTRALISES AND ELIMINATES them. Non toxic. Does not contaminate. Does not leave stains. 2 versions available: spray or concentrated liquid. Spray comes in a plastic bottle; liquid is supplied in a glass bottle. Expiration date: 5 years. code

description

case quantity

case weight

case volume

910000

liquid, 7.5 ml bottle (200 drops)

12

0.54

0.0018

911000

spray, 100 ml bottle

15

2.00

0.0027

c (MDD)

Urine collection bottle

Made of polyethylene. Colour: natural. Collection bottle for male urine, including a 110 mm handle. The bottle has moulded-in graduations in 100 ml increments up to 1,000 ml. Total capacity: 1.1 l. Rounded rim on the neck of the bottle. Inner diameter of the neck is 50 mm, outer diameter is 69 mm. Supplied individually wrapped. Can be sterilised by ethylene oxide. code

total capacity

case quantity

case weight

case volume

cases per pallet

19591

1l

60

7.40

0.152

24

Urine collection bottle with lid

c (MDD)

With the same characteristics than the previous model this one features a plug in lid. Individually wrapped. code

total capacity

case quantity

case weight

case volume

cases per pallet

19591/T

1l

60

8.00

0.152

24

c (MDD)

Bed pan

Made of white polypropylene. Especially designed for disabled people, for the collection of urine and faeces. Features rounded edges for more comfort. L-shaped handle for a better handling. Allows a secure one-handed grip and avoids accidental spillage. Useful for hanging on handles, beds, etc. Total capacity: 2.5 l. Autoclavable. Can be washed in automatic machines. Supplied individually wrapped. code

dimensions mm

case quantity

case weight

case volume

cases per pallet

19586

440 x 270 x 95

20

5.00

0.140

16

253


254

11. SAFETY

Hygienic aerosol It forewarns from hand-spreaded infections thanks to its antiseptic formula. It is composed by a pulverisation device (35 x 10 cm), made of ABS, and a 250ml interchangeable aerosol bottle (to be only used with the device). Characteristics: -Quick, efďŹ cient and practical system. -Small, autonomous, and easy to use device. -Easy to install in any place and in few seconds. -No maintenance needed. -Antiseptic diffusion by pulverisation. -Instantaneous drying. -Excellent cutanea tolerance. -No risk of retro-contamination of the recipient. To be used over clean and dry hands in: -Hospital rooms. -Medical cabinets, sampling rooms, nursing, white rooms... -Laboratories. -Sanitary vehicles. Composition and microbiological properties: %THANOLVOL -Qsp 100 ml, Camphor 0,20 g. -Qsp 100 ml, Tartrazine 0,0002 g. -Bactericide (pr EN 12054). -Active in 1 minute over staphylococcus aureus, escherichia coli, enterococcus hirae. -Active over Candida Albicans (NF EN 1275). -Propulsion gas = nitrogen (ecological) Referenced in the Positive List of Disinfectants (PLD) 2008, publish by la SociĂŠtĂŠ Française dâ&#x20AC;&#x2122;Hygiène Hospitalière (SFHH). It may be installed using supplies already included in each unit: self-adhesive ribbon or screws. This product has to be transported in compliance with provisions of the ADR for road, RID for rail, IMDG for sea and ICAO/ IATA for air transport. ADR/RID

Class

Code

Label

LQ

Provis.

2

5F

2.1

LQ2

190-625

LQ

EMS

Dispo.

IMDG

Class

SP277

F-D,S-U

63 190 191 277 913

IATA

Class

2nd Label

Passenger

Passenger

Cargo

2

2.1

203

75 kg

203

code

description

case quantity

case weight

case volume

cases per pallet

912000

250 ml aerosol bottle

12

3.6

0.009

720

913000

pulverisation device

1

0.14

0.003

720

2


11. SAFETY

Alcohol pads $ESINFECTINGPADSWITHISOPROPYLALCOHOL MADEFROMASMOOTH lBER FREEFABRIC Ideal for use as an antiseptic for cleaning small areas. Supplied in aluminium bags.

code

dimensions cm

case quantity

case weight

case volume

192925

7 x 3.5

20 x 100

3.00

0.010

3

c (MDD)

Hospital swabs

Cotton tip Ă&#x2DC; 11 mm. Swabs designed for cleaning and desinfection when tip is soaked in a desinfectant, thus reducing the risk of a direct contact between userâ&#x20AC;&#x2122;s hands and the wound or surface to clean.

mod.

code

1

300234

2

300236

3

300237

description wood + cotton 150 x 2.5 mm polypropylene + cotton 150 x 4 mm polypropylene + cotton 200 x 4 mm

case quantity

case weight

case volume

20 x 50

2.20

0.030

20 x 50

2.30

0.030

10 x 50

3.30

0.049

2

1

255


256

11. SAFETY CHOOSE YOUR GLOVE SIZE - MEASURE YOUR HAND

Place the angle between thumb and index

See more information about our gloves in Chapter 0. Technical Information.

c (PPE) c (MDD)

Nitrile gloves

Single use gloves made of Butadiene Nitrate (Nitrile). Medical and laboratory use, non sterile gloves. Ambidextrous. Hypoallergenic. Gloves are available powder-free. 100 units per case. Minimum length: 280 mm. AQL 1.5. In compliance with the EN 455, EN 374 and EN 420 European standard; and with the ASTM D 6319 American standard. code

size

description

case quantity

case weight

case volume

402NP

small (6-7)

powder-free

10 x 100

6.90

0.030

402NM

medium (7-8)

powder-free

10 x 100

6.50

0.030

402NG

large (8-9)

powder-free

10 x 100

6.10

0.030

Cases per pallet: 63

c (PPE) c (MDD)

Vinyl gloves

Single use gloves made of top quality polyvinyl. Non sterile gloves. Designed for medicale use. Ambidextrous. Hypoallergenic (powderfree gloves). Gloves are available powder-free or pre-powdered. Both models feature beaded cuffs. 100 units per case. Minimum length: 240 mm. AQL 1.5. In compliance with: EN 455, EN 374 and EN 420 European standard; and with the ASTM D 5250 American standard. code

size

description

case quantity

case weight

case volume

202VP

small (6-7)

powder-free

10x100

6.08

0.030

202VM

medium (7-8)

powder-free

10x100

6.44

0.030

202VG

large (8-9)

powder-free

10x100

7.66

0.030

200VP

small (6-7)

pre-powered

10x100

6.02

0.030

200VM

medium (7-8)

pre-powered

10x100

6.48

0.030

200VG

large (8-9)

pre-powered

10x100

7.08

0.030

Cases per pallet: 77


11. SAFETY c (PPE) c (MDD)

Latex gloves

Single use gloves made of top quality latex. Non sterile gloves. Designed for medical and laboratory use. Ambidextrous. Gloves are available powder-free or pre-powdered. Both models feature beaded cuffs. 100 units per case. Minimum length: 240 mm, average thickness 0.08 mm. AQL 1.5. In compliance with the EEN 455, EN 374 and EN 420 European standard and with the ASTM D 3578 American standard. size

description

case quantity

case weight

case volume

102LP

small (6-7)

powder-free

10x100

7.10

0.030

102LM

medium (7-8)

powder-free

10x100

7.50

0.030

code

102LG

large (8-9)

powder-free

10x100

8.00

0.030

100LSP

extra-small (5-6)

pre-powered

10x100

5.08

0.030

100LP

small (6-7)

pre-powered

10x100

5.70

0.030

100LM

medium (7-8)

pre-powered

10x100

5.90

0.030

100LG

large (8-9)

pre-powered

10x100

6.70

0.030

Cases per pallet: 63

Safety gloves Provide superior protection when handling hot, cold or damp objects. Made of strong non toxic silicone rubber which resists tearing and withstands temperatures from –55ºC up to 260ºC. Thumb and fingers fit into end pockets. The gripping surfaces have multiple concave tipped studs for non-slip grip (48+48 studs). code

dimensions mm

case quantity

case weight

case volume

19270

190 x 100

1

0.09

0.0004

c (PPE)

Thermic safety gloves

All cotton, asbestos free gloves. They are ideal for taking hot objects out not only from the autoclave but also from the oven, … and handling them. Gauntlet with black sewn reinforcements at the edges for long lasting use. Heat resistant up to 230 ºC. They may be both used with the washing and the drying machine. code

total lenght mm

sleeve lenght mm

bag quantity

bag weight

bag volume

400S

470

280

1 pair

0.35

0.002

257


258

12. GENERAL LABWARE


12. GENERAL LABWARE

259


12. GENERAL LABWARE Measuring cylinders with pentagonal base Material: polypropylene. Autoclavable up to 121ºC. In compliance with ISO 6706 and BS 5404 standards. code

capac. ml

grad. ml

subdiv. ml

O.D. Ø mm

height mm

case quantity

case weight

case volume

408025

25

5

0.5

19

195

30

0.83

0.008

408050

50

10

1.0

26

200

30

1.14

0.011

408100

100

10

1.0

31

250

30

1.95

0.018

408250

250

20

2.0

41

315

12

1.45

0.015

408500

500

50

5.0

56

360

12

2.45

0.029

481000

1,000

100

10.0

66

440

6

2.13

0.030

482000

2,000

200

20.0

80

530

6

3.25

0.051

Minimum order quantity: 1.

Graduated measuring cylinders pentagonal base PP

260

Made of polypropylene. Autoclavable up to 121ºC. ISO 6706 and BS 5404 standards. POLYPROPYLENE code

capac. ml

grad. ml

subdiv. ml

O.D. Ø mm

height mm

case quantity

case weight

case volume

192561

25

5

0.5

19

195

30

0.85

0.008

192562

50

10

1.0

26

200

30

1.15

0.011

192563

100

10

1.0

31

250

30

2.00

0.018

192564

250

20

2.0

41

315

12

1.50

0.015

192565

500

50

5.0

56

360

12

2.45

0.029

192566

1,000

100

10.0

66

440

6

2.15

0.030

192567

2,000

200

20.0

80

530

6

3.25

0.051

Minimum order quantity: 1. Made of TPX. Autoclavable up to 170 ºC. ISO 6706 and BS 5404 standards.

TPX

code

capac. ml

grad. ml

subdiv. ml

O.D. Ø mm

height mm

case quantity

case weight

case volume

192571

25

5

0.5

19

195

30

0.85

0.008

192572

50

10

1.0

26

200

30

1.15

0.011

192573

100

10

1.0

31

250

30

1.95

0.018

192574

250

20

2.0

41

315

12

1.45

0.015

192575

500

50

0.5

56

360

12

2.45

0.029

192576

1,000

100

10.0

66

440

6

2.15

0.030

192577

2,000

200

20.0

80

530

6

3.25

0.051

Minimum order quantity: 1.


12. GENERAL LABWARE Volumetric flasks with stopper Material: polypropylene. Autoclavable up to 121 ºC. code

capac. ml

neck

case quantity

case weight

case volume

191484

25

12 / 21

20

0.27

0.003

191485

50

14.5 / 23

20

0.35

0.004

191486

100

14.5 / 23

20

0.55

0.008

191487

250

19 / 26

10

0.60

0.009

191488

500

19 / 26

10

0.70

0.015

191489

1,000

19 / 26

5

0.65

0.015

Minimum order quantity: 1.

Upper neck

Lower neck

Erlenmeyer flasks Material: polypropylene. Autoclavable up to 121 ºC. Graduated. code

capac. ml

grad. ml

neck

quantity

weight

volume

191460

50

10

14.5 / 23

1

0.02

0.001

191461

125

25

14.5 / 23

1

0.03

0.001

191462

250

25

19 / 26

1

0.06

0.001

191463

500

50

24 / 29

1

0.10

0.002

191464

1,000

50

29 / 32

1

0.20

0.002

191465

2,000

100

34.5 / 35

1

0.40

0.002

NOTE: NS Neck: The first measure regards to the inner Ø of the lower neck. The second one refers to the inner Ø of the upper neck.

261


262

12. GENERAL LABWARE Graduated beakers Made of TPX. Autoclavable to 170 ºC. ISO 6706 and BS 5404 standards. code

capac. ml

subdiv. ml

Ø mm

height mm

case quantity

case weight

case volume

191720

25

1

35

49

20

0.40

0.003

191721

50

2

42

60

20

0.70

0.004

191722

100

5

52

72

12

0.70

0.005

191723

250

10

71

96

16

1.45

0.011

191724

500

10

90

120

12

2.10

0.016

191725

1,000

20

110

149

4

1.20

0.010

191726

2,000

50

135

184

4

2.00

0.018

191727

3,000

500

160

200

2

1.80

0.016

Minimum order quantity: 1.

Graduated beakers Made of transparent polypropylene. Autoclavable a 121 ºC. ISO 6706 and BS 5404 standards. code

capac. ml

subdiv. ml

Ø mm

height mm

case quantity

case weight

case volume

191821

25

1

35

49

20

0.20

0.002

191822

50

2

42

60

20

0.35

0.004

191823

100

5

52

72

12

0.35

0.005

191824

250

10

71

96

16

0.75

0.011

191825

500

10

90

120

12

1.05

0.016

191826

1,000

20

110

149

4

0.60

0.010

191827

2,000

50

135

184

4

1.00

0.018

191828

3,000

500

160

200

2

0.90

0.016

191829

5,000

500

191

230

2

1.40

0.024

Minimum order quantity: 1.

Graduated beakers Material: transparent polypropylene. Autoclavable up to 121 ºC. In compliance with ISO 6706 and BS 5404 standards. code

capac. ml

Ø mm

height mm

case quantity

case weight

case volume

409025

25

35

50

20

0.18

0.003

409050

50

42

60

20

0.35

0.004

409100

100

53

72

12

0.33

0.005

409250

250

71

96

16

0.72

0.011

409500

500

90

120

12

0.88

0.016

491000

1,000

110

149

4

0.65

0.016

492000

2,000

135

184

4

1.00

0.018

493000

3,000

160

200

2

0.88

0.016

495000

5,000

191

230

2

1.38

0.024

Minimum order quantity: 1.


12. GENERAL LABWARE

Beakers with three spouts Graduated beakers made of ultra clear polypropylene Autoclavable up to 121 ºC. Disposable. Moulded-in graduations. code

volume ml

case quantity

case weight

case volume

490050

50

100

1.31

0.010

490100

100

100

1.36

0.010

490250

250

100

2.54

0.020

490400

400

100

2.81

0.020

490900

900

100

5.90

0.060

Minimum order quantity: 10.

Conical measuring flasks In polypropylene. Autoclavable up to 121 ºC. code

volume ml

height mm

case quantity

case weight

case volume

19423

250

160

18

1.30

0.020

19424

500

180

8

1.00

0.015

19425

1,000

270

3

1.00

0.017

Minimum order quantity: 1.

263


264

12. GENERAL LABWARE Analytical funnels Material: polypropylene. Autoclavable. 60ºC angle. code

Ø mm

stem Ø mm

case quantity

case weight

case volume

19145

25

4

20

0.06

0.0030

19146

35

5

20

0.08

0.0040

19147

45

5

20

0.10

0.0050

19148

65

9

20

0.30

0.0060

19150

80

10

20

0.50

0.0126

19152

100

11

1

0.03

0.0008

19153

120

11

1

0.04

0.0009

High speed funnels Material TPX. With interior helicoid channels for a quicker filtration. Prevents the filter paper from sticking. Transparent. Autoclavable. code

Ø mm

stem Ø mm

lenght mm

case quantity

case weight

case volume

19175

51

3

150

6

0.74

0.01

19172

70

3

150

6

0.12

0.01

19173

100

7

108

4

0.17

0.01

19174

140

10

132

6

1.30

0.02

Long-stem funnels Material: polypropylene. 60ºC angle. Autoclavable. code

Ø mm

stem Ø mm

lenght mm

case quantity

case weight

case volume

19162

60

8

150

10

0.20

0.005

19164

80

8

150

10

0.30

0.006

19165

100

8

150

10

0.60

0.006

Funnels Material: polypropylene. Autoclavable. diameter mm

quantity

weight

volume

194171

80

1

0.02

0.0004

194172

100

1

0.02

0.0005

194173

120

1

0.04

0.0006

194175

180

1

0.13

0.0006

194176

220

1

0.30

0.0015

194177

260

1

0.40

0.0020

194178

300

1

0.50

0.0022

code


12. GENERAL LABWARE Powder funnels Material: polypropylene. Autoclavable. 60º angle. code

Ø ext. mm

stem Ø mm

case quantity

case weight

case volume

19171

60

15

20

0.37

0.002

19167

80

15

20

0.40

0.005

19168

100

25

20

0.60

0.009

19169

120

30

1

0.05

0.001

19170

150

35

1

0.06

0.001

19166

180

40

1

0.12

0.002

FUNNEL

«IMHOFF» sedimentation cone Material: SAN. Moulded graduations according to DIN standards 12672. mod.

code

capac. mm

Ø mm

height mm

case quantity

case weight

case volume

1

191055

1,000

125

480

4

1.70

0.019

1

Rack for sedimentation cones Material: PMMA. For 2 cones. mod.

code

dimensions mm

case quantity

case weight

case volume

2

191056

150 x 300 x 290

1

1.20

0.001

2

Büchner funnels Material: polypropylene. Unbreakable and resistant to corrosion and heat. Easily dismantled for cleaning. Autoclavable. code

capac. ml

Ø mm

holes mm

case quantity

case weight

case volume

19437

40

42,5

1

1

0.05

0.005

19438

70

55

1

1

0.07

0.001

19440

285

80

1.5

1

0.13

0.002

19441

390

90

2

1

0.20

0.003

19442

810

110

2

1

0.30

0.004

19443

2,100

160

2.5

1

0.60

0.012

19445

6,000

240

3

1

1.00

0.028

265


266

12. GENERAL LABWARE Burette clamps

1

Made of autoclavable polypropylene. Clamps can fit onto rods Ø 8 to 14 mm. Stainless steel centre arm includes a spring and firmly holds in place the burette by means of rubber pads. Burette clamps do not obscure graduations. Suitable for all burettes. Base is supplied separately, see details below.

2

mod.

code

description

case quantity

case weight

case volume

1

19139

for 1 burette

5

0.30

0.002

2

19140

for 2 burette

5

0.40

0.003

Minimum order quantity: 1.

Rectangular base for burettes Base made of autoclavable polypropylene, with chromium plated steel rod. Rods can be screwed one onto the other to obtain different heights. All models come with 2 rods of Ø 250 x 12 mm. 2 models available: base with central hole, and base with off centre hole.

3

mod.

code

3

19266

4

19267

description

case quantity

case weight

case volume

1

0.75

0.002

1

0.80

0.002

base with central hole and + 2 rods base with off-centre hole and + 2 rods

Rods available separately. Please contact our Commercial department. 4

Separation funnel holder Made of autoclavable polypropylene. Supplied with two adaptors to fit support rods diameter 8 to 14 mm. Designed for funnels Ø 75 mm minimum. code

description

case quantity

case weight

case volume

19970

for 1 funnel

5

0.25

0.002

Minimum order quantity: 1.

Funnel holders Made of autoclavable polypropylene. 2 models available, single and double holder, for funnels from 25 mm (adaptor supplied) up to 170 mm. Without adaptor, holders can be used with powder funnels with diameter not exceeding 35 mm. Suitable for use on Ø 8 to 14 mm rods (which include codes 19266 and 19267 for example ) by means of adaptors (included). code

description

case quantity

case weight

case volume

19268

for 1 funnel

5

0.35

0.002

19269

for 2 funnels

5

0.65

0.006

Minimum order quantity: 1.


12. GENERAL LABWARE Pipette stand Made of polypropylene. Consists of a rounded base with a rod, and a circular pipette stand to hold up to 28 pipettes. Base and pipette stand are supplied separately. s#ODE19262, rounded base with rod, is specially designed to hold the pipette stand. s4HESTANDCODE19265 accomodates 18 pipettes Ø up to 10 mm, and 10 pipettes Ø up to 15 mm. The lower disc has little holes for liquid draining. The ring included with the stand allows its raising and lowering on the rod. description

case quantity

case weight

case volume

19262

rounded base

1

0.22

0.002

19265

18 small and 10 large holes stand

1

0.35

0.008

code

Flask weight ring Heavy vinyl covered ring ideal to improve stability of Erlenmeyer flasks in water bath. High chemical resistance. code

erlenmeyer capacity

internal Ø mm

quantity

weight

volume

192470

125 - 500 ml

48

1

0.30

0.001

192471

250 - 1,000 ml

51

1

0.55

0.001

192472

500 - 2,000 ml

57

1

0.80

0.001

Vacuum pump Material: polypropylene. This vacuum pump combines excellent suction capacity with limited water consumption, under low pressure (0.5-1 kg/cm2) as well as high presssure (10 kg/cm2). The built-in, non return valve protects the pump from possible water back-flow. Autoclavable. Can be dismounted for easy cleaning. code

description

quantity

weight

volume

191395

water jet vacuum pump

1

0.03

0.001

191396

connection tube

5

0.50

0.002

Minimum order quantity: 1.

267


268

12. GENERAL LABWARE Rotary pipette stand This stand which can hold 94 pipettes consists of 2 discs rotating on a central vertical axis for convenient pipette selection. The lower rotating disc has tapered sides and open bottoms to protect tips and allow water run off. Rotating discs are 18 cm diameter. The pipette stand comes unassembled with instructions for quick and easy assembly. Made of autoclavable polypropylene. Can accomodate all our serology pipettes presented on page 75-76, except the 25 ml model. code

dimensions mm (Ø x h)

case quantity

case weight

case volume

19254

230 x 480

1

0.35

0.008

Plastic dessicator Base: polypropylene. Cover: transparent polycarbonate. Will hold a vacuum of 740 mm Hg for 24 hours, with loss not exceeding 20 mm Hg. The cover seals onto a neoprene O ring set into the flange of the base to ensure a positive seal. Non-return valve (polycarbonate) and vacuum release tap (polyethylene) assembly included; a specially grooved stopper in this assembly allows air to be re-admitted very slowly to avoid disturbing the contents. A little grease spread on the O ring will assist in establishing initial vacuum. The dessicator includes a removable pan for holding calcium chloride or other drying agents. code

aprox. capac. l

Ø mm

h. ext. mm

h. int. mm

case quantity

case weight

case volume

19230

4.5

200

230

175

1

2.00

0.004

19554

9.2

250

300

225

1

2.50

0.018

c (IVD)

Dessicator discs Material: white polypropylene. 25 holes. Autoclavable. code

Ø mm

for dessicator

case quantity

case weight

case volume

19231

190

19230

10

0.20

0.001

19553

239

19554

10

0.30

0.001

Minimum order quantity: 1

Glass dessicator Base and cover made of 3.3 soda glass. High resistance to chemicals. Can be used with drying agents such as calcium chloride, silica gel, phosphor pentoxide and even sulfuric acid. Before use, clean the sealing surfaces and lubricate them with grease for vacuum. Will hold a vacuum of 500 mm Hg for 24 hours. Dimensions: 200 mm Ø, 270 mm high. Capacity approx. 2.5 l.

code

description

case quantity

case weight

case volume

19232

dessicator with a stainless steel plate

1

5.10

0.022

1

5.10

0.022

19235 dessicator with a stainless plate and PTFE valve


12. GENERAL LABWARE Glass water still Automatic glass water distiller with a heather sheathed in quartz; glass and quartz allow to obtain highly pure water, as they have a very low interaction with it. It supplies an output of three l/h of high purity water (conductivity: 2 μS · cm-1 a 20ºC) free of metallic ions and pyrogen. The water quality is considered ASTM III/IV. In order to always obtain the maximum degree of water purity, we recommend to periodically control the quality of the water supplied to the still and to maintain the inner part of the still in good cleaning conditions. The safety thermostat interrupts the heating of the heater in case water supply fails, protecting the still and saving energy. Once the water supply is recovered, the thermostat restarts the process. Portable. Easy handling and cleaning. Supplied assembled. Dimensions mm: 550 x 150 x 500. Electrical consumption: 2,200 W Heather: 2.2 KW Voltage: 230 V Intensity: 10 A Water consumption: 60 l/h approx. code

description

case quantity

case weight

case volume

19558

glass water still

1

6.5

0.10

19558.M

glass water still, british plug

1

6.5

0.10

19558.SP

extra heather

1

2

0.05

Stainless steel water still Automatic stainless steel water distiller. It supplies an output of 6 - 7 l/h of high purity water (conductivity: 2.5 μS · cm-1 a 20ºC) free of metallic ions and pyrogen. The water quality is considered ASTM III/IV (laboratory grade). In order to always obtain the maximum degree of water purity, we recommend to periodically control the quality of the water supplied to the still and to maintain the inner part of the still in good cleaning conditions. It embodies two security systems in order to protect still from overheating and save energy: the first system controls the temperature level and turns off the still in case the temperature rises more than required. The second one interrupts the process in case water supply fails. Easy maintenance. Supplied assembled. Electrical consumption: 6.000 W Heaters: 2 x 3 KW Voltage: 230 V Intensity: 30 A Water consumption: 60 – 70 l/h code

dimensions mm

case quantity

case weight

case volume

19580

260 x 260 x 627

1

16

0.12

269


270

12. GENERAL LABWARE Test tube tongs Made of brown plastic. High resistance to heat. Ideal for handling hot tubes or to heat test tubes. With a longer arm for a better handling and to avoid close contact between ďŹ ngers and the ďŹ&#x201A;ames of the burner. Total lenght: 17.5 cm. code

description

bag quantity

bag weight

bag volume

19509

plastic tongs

10

0.134

0.002

See Chapter 4. Histology

Laboratory spatulas Material: polystyrene. code

description

length mm

bag quantity

bag weight

bag volume

19593

spatula-spoon

210

10

0.35

0.001

19596

spatula-spoon

180

10

0.25

0.001

19595

double spatula

180

10

0.25

0.001

19594

double spatula

150

10

0.20

0.001

Measuring scoops Material: white polypropylene. Autoclavable. code

capacity ml

length mm

bag quantity

bag weight

bag volume

191057

10

100

12

0.30

0.003

191058

25

135

12

0.30

0.004

191059

50

160

12

0.35

0.004

191060

100

200

12

0.40

0.004

191062

250

260

6

0.38

0.004

191063

500

315

6

0.46

0.005

191064

1,000

400

6

0.70

0.008

Measuring scoops Material: high density polyethylene. code

capacity ml

length mm

bag quantity

bag weight

bag volume

191065

25

135

12

0.084

0.012

191066

65

185

12

0.21

0.012

191067

110

215

12

0.35

0.012

191068

150

250

12

0.45

0.012

191070

350

310

6

0.32

0.006

191071

750

350

6

0.70

0.006

191069

1,250

400

6

1.00

0.006


12. GENERAL LABWARE PVC Pipette tray Made of white PVC, resistant to temperatures from -20 to +80ºC. Model 1, code 19252, is perfect to fit inside drawers. It includes four compartments that can hold up to thirty pipettes of 1, 2, 5, or 10 ml. Model 2, code 19996. Sixteen pipettes up to 10 mm diameter can be accommodated longitudinally; laterally, seven pipettes up to 20 mm diameter. Tray edges are ergonomically designed for a better handling. It is also useful with other instruments. See our range of pipettes on pages 78 - 79. code

dimensions mm

case quantity

case weight

case volume

1

19252

426 x 300 x 30

1

0.40

0.006

2

19996

283 x 216 x 40

6

1.30

0.018

mod.

1

2

PVC Antiacid trays Resistant to temperatures from -20 to +80ºC. Ideal for photographic purposes thanks to their ribbed interior surface. code

dimensions mm

quantity

weight

volume

19280

200 x 150 x 50

1

0.30

0.001

19281

250 x 200 x 60

1

0.40

0.003

19282

320 x 260 x 70

1

0.50

0.005

19283

350 x 300 x 85

1

0.60

0.009

19284

430 x 330 x 95

1

0.80

0.013

19285

520 x 420 x 95

1

0.90

0.020

ABS trays They withstand temperatures from -40 to +85ºC. code

dimensions mm

body weigth g

quantity

weight

volume

195701 195702

200 x 150 x 20

78

20

1.80

0.007

300 x 150 x 20

115

20

2.50

0.008

195703

350 x 250 x 20

217

20

4.30

0.015

195705

200 x 150 x 40

91

20

2.00

0.009

195706

300 x 150 x 40

134

20

2.80

0.009

195707

350 x 250 x 40

254

20

3.80

0.018

195709

200 x 150 x 80

110

20

2.42

0.008

195711

350 x 250 x 80

299

20

3.50

0.033

195713

400 x 300 x 20

345

10

2.50

0.052

Drying rack PVC coated steel wire drying rack for general labware. It embodies 55 pegs, and 5 brackets specially designed to hold erlenmeyer flasks and beakers. Pegs are plastic coated for better protection. Two rings on the rack allow the rack to be mounted on the wall. It includes a tray in order to avoid drops on the surfaces where the rack is placed code

dimensions mm

case quantity

case weight

case volume

19212

640 x 360 x 140

1

2.2

0.05

271


12. GENERAL LABWARE Pipette and burette rinsing set Made of polyethylene and polypropylene. Can hold pipettes and burettes of length up to 60 cm. Ensures a fast, safe washing. Ideal for use in labs where caustic and toxic materials are used.

19221

code

description

height mm

Ø mm

case quantity

case weight

case volume

19215

burette washer

750

165

1

3.50

0.110

19217

pipette washer

650

165

1

3.00

0.140

19218

pipette jar

650

165

1

1.80

0.048

19219

pipette basket

650

130

4

2.00

0.027

19221

pippete jar

500

165

1

1.50

0.049

19222

pipette basket

500

130

4

2.00

0.027

19223

pipette jar

250

125

4

2.00

0.031

191219

extension for 19219

650

130

2

1.00

0.043

Suggested sets: s&ORPIPETTES

191219

272

X19217 2 x 19219 1 x 19218

s&ORSHORTERPIPETTES

X19217 2 x 19222 1 x 19221 or 19223

s&ORBURETTES X19215 2 x 19219 2 x 191219 1 x 19218

19217 19219

Drying rack Wall mountable high impact polystyrene drying rack in light blue colour for general labware. This rack consists of a single mould 4 mm plate with 72 peg sockets. Push-in pegs can be placed in any configuration on the rack, and are easily removable to accomodate odd shaped items. Peg sockets have closed ends to avoid dripping and eliminate the risk of biological contamination. Rack suitable for items with diameter of the mouth larger than 15 mm. A drip channel collects dripping that drains via a drain tube provided. Includes 11 additional peg sockets (Ø 6 mm.) for smaller parts Comes complete with a mounting kit and fixing template. code

dimensions mm

case quantity

case weight

case volume

19213

450 x 630 x 110

1

5.00

0.050


12. GENERAL LABWARE Hexagonal weighing dishes Made of white translucent polystyrene. Easily bent into pouring spouts, the dishes enable non-spill transfer. Biologically inert, contaminant-free, they are resistant to diluted acids, aqueous solutions, alcohols and bases. Antistatic. Suitable for microwave. Will withstand temperatures from 80 to -10ºC. code

upper Ø (a) x lower Ø (b)

case quantity

case weight

case volume

1911106

35 x 25

500

0.28

0.001

1911107

64 x 47

500

0.90

0.004

1911108

110 x 85

500

1.85

0.007

1911109

130 x 89

500

2.80

0.014

Squared weighing dishes Made of white translucent polystyrene. Easily bent into pouring spouts, the dishes enable non-spill transfer. Biologically inert, contaminant-free, they are resistant to diluted acids, aqueous solutions, alcohols and bases. Not antistatic. Suitable for microwave. Will withstand temperatures from 80 to -10ºC. code

dimensions

weight (g)

bag quantity

bag weight

bag volume

1911103

41 x 41 x 8

0.34

500

0.17

0.02

1911104

89 x 89 x 25

1.07

500

0.54

0.04

1911105

140 x 140 x 22

3.27

500

1.63

0.07

Weighing bottles Light-weight, re-usable and autoclavable, made of translucent polypropylene. Push on lids ensure an airtight seal. High resistance to chemicals. Tops can be squeezed for more convenient pouring. It is recommended to remove lids before autoclaving. code

tare (g)

capacity ml

Ø mm

height mm

bag quantity

bag weight

bag volume

19340

8

30

30

50

10

0.09

0.001

19345

10

50

50

30

10

0.14

0.002

19347

28

200

60

90

10

0.35

0.005

Watch glasses Made of autoclavable polypropylene. Moulded base for more stability. Easy cleaning. code

weight (g)

Ø mm

case quantity

case weight

case volume

19452

3.7

60

10

0.50

0.002

19454

5.5

80

10

0.50

0.002

19455

10

100

10

0.70

0.002

b a

273


274

12. GENERAL LABWARE Reinforced silicone tubing. Non toxic. Reinforced silicone tubing with a tough polyester inner-braid imbedded in the wall, it is much more resistant to pressure than standard silicone tubing. Very flexible. Its clear wall permits positive flow monitoring and inspection. It has a smooth inner wall that will not trap bacteria-harboring particles, making it ideal for food and beverage use. Indicated for elevated working pressure. It is not toxic. Resist temperatures from -50ºC to 200ºC (beaks of 250 ºC). Minimum order quantity: one roll of 15 meters.

code

dimensions mm Ø int. x Ø ext.

bag weight

bag volume

350613

6 x 13

2.10

0.0057

350815

8 x 15

2.70

0.0010

359517

9.5 x 17

3.30

0.0071

Silicone sheets 50 x 50 cm silicone sheets ideal as a laboratory benchtop protection or for use in autoclaves to protect any material. For cleaning simply use a wet cloth. Resistant up to 260 °C.

code

thickness mm

bag quantity

bag weight

bag volume

350002

2

1

0.60

0.0012

350004

4

1

1.20

0.0012

Silicone mat Made of red silicone, this mat will resist temperatures up to +260 ºC. Features a high adherence and anti-skid surface. For use over the benchtop or over laboratory stirrers to prevent beakers from slipping. Dimensions: 25 x 25 x 0.4 cm. code

description

bag quantity

bag weight

bag volume

900000

silicone mat

1

0.135

0.003


12. GENERAL LABWARE Medical grade silicone tubing. Non toxic Medical grade silicone. For use in a variety of medical, pharmaceutical, industrial and clinical applications. Translucent tubing. Very high mechanical and chemical resistance. Silicone tubing has a chemical composition similar to quartz and glass and share their excellent properties. Autoclavable. Technical features: Specific gravity: 1.2 + 0.1 Toughness: 40 - 80 Sh Resistance to traction: 77-95 Kg./cm2 Extension: 275-780% Resistance to tearing: 20 - 50 Kg./cm Temperature range: - 50º to +200 ºC (beaks of 250ºC) code

dimensions mm Ø int. x Ø ext.

bag quantity (meters)

bag weight

bag volume

350051

0.5 x 1

1 x 100

0.07

0.005

350115

1 x 1.5

1 x 100

0.12

0.005

350013

1x3

1 x 15

0.12

0.003

350024

2x4

1 x 15

0.16

0.01

350034

3x4

1 x 15

0.13

0.01

350035

3x5

1 x 15

0.23

0.01

350037

3x7

1 x 15

0.38

0.01

350046

4x6

1 x 15

0.29

0.01

350048

4x8

1 x 15

0.67

0.01

350057

5x7

1 x 15

0.46

0.008

350059

5x9

1 x 15

0.78

0.01

350069

6x9

1 x 15

0.65

0.02

350610

6 x 10

1 x 15

0.9

0.008

350612

6 x 12

1 x 15

1.6

0.02

350079

7x9

1 x 15

0.45

0.02

350710

7 x 10

1 x 15

0.75

0.02

350810

8 x 10

1 x 15

0.82

0.02

350812

8 x 12

1 x 15

1.2

0.02

350814

8 x 14

1 x 15

1.9

0.02

350912

9 x 12

1 x 15

0.9

0.02

350915

9 x 15

1 x 15

2.1

0.02

351014

10 x 14

1 x 15

1.5

0.02

351420

14 x 20

1 x 15

2.9

0.03

351622

16 x 22

1 x 15

3.2

0.03

352030

20 x 30

1 x 15

7

0.03

NOTE: Tube thickness = external Ø - internal Ø 2

Tubing clamps Material: autoclavabe acetate. These clamps will not distort, rust or corrode. Different positions to control flow from full open to complete closure. code

description

bag quantity

bag weight

bag volume

19505

for tubes of 3.2 to 11 mm (15 positions)

12

0.09

0.0009

19504

for tubes of 11 to 19 mm (12 positions)

6

0.12

0.0003

275


Ø crest

Ø valley

12. GENERAL LABWARE «T» and «L» connectors Material: polypropylene. Autoclavable. code

bag fits tubing Ø mm* Ø mm interior shape quantity Ø mm valley/crest mouth

bag weight

bag volume

19459

4

3.3 / 3.6

1.6

T

20

0.01

0.001

19460

6

4.5 / 5.4

2.8

T

20

0.01

0.001

19461

8

6.9 / 7.6

4.4

T

20

0.03

0.001

19462

10

8.7 / 9.5

6.3

T

20

0.05

0.001

bag weight

bag volume

* See the scheme

«Y» and «+» connectors

Ø crest

Ø valley

276

Material: polypropylene. Autoclavable. code

bag fits tubing Ø mm* Ø mm interior shape quantity Ø mm valley/crest mouth

191410

3.5

3.0 / 3.4

1.5

+

20

0.01

0.001

191411

6

4.8 / 5.6

2.7

+

20

0.02

0.001

191412

8

6.9 / 7.4

4.6

+

20

0.04

0.001

191414

12

10.4 / 11.5

8.0

+

20

0.09

0.001

191415

13.5

12.3 / 13.5

9.5

+

10

0.08

0.001

19465

6

4.7 / 5.7

2.7

Y

20

0.01

0.001

19467

10

8.9 / 9.9

5.5

Y

20

0.03

0.001

19468

12

10.5 / 11.6

7.3

Y

20

0.05

0.001

* See the scheme

«Straight» and 3 way connectors Material: polypropylene. Autoclavable. Made of one piece. Ø crest min. Ø crest max.

code

19510

4-5-6

3/4.5/5.5

2.0

19512

9-8-10

6.3/9/11

4.5

19513 10-11-12 8.3/10.5/13 19527

bag bag quantity weight

fits tubing Ø mm* Ø mm interior shape Ø mm valley/crest mouth

4-5-6

19530 10-11-12

6.5

4.1/5.1

1.5

9.9/11.5

5.5

straight line straight line straight line three branches three branches

bag volume

20

0.02

0.001

20

0.07

0.001

20

0.08

0.001

20

0.03

0.001

20

0.13

0.001

* See the scheme

Laboratory holders Ideal for holding tubing or thermometers onto the edge of beakers or other vessels. Autoclavable. code

19971 19972

description for tubing of up to 9.5 mm Ø. Polycarbonate for thermometers from 3.2 mmto 11 mm Ø. Polypropylene

Minimum order quantity:

bag quantity

bag weight

bag volume

6x6

0.14

0.001

12 x 3

0.15

0.001

19971 - 6 units 19972 - 3 units


12. GENERAL LABWARE Stopcock, straight bored Ideal for liquids and gases under low pressure or low vacuum. Material: polypropylene and high density polyethylene that gives a smooth turning action requiring no lubricants. All are straight bored. fits tubing Ø mm

Ø mm interior mouth

bag quantity

bag weight

bag volume

19374

8

4.9

10

0.05

0.001

19371

10

7.0

10

0.06

0.001

19376

14

10.9

10

0.15

0.001

19379

16

12.7

10

0.15

0.001

code

Composed Disconnectors / connectors Material: polyethylene. Very useful for connecting rubber or plastic tubing of different diameter. Composed by two parts. Connectors fit tightly together. code

fits tubing Ø mm

Ø mm crest max/min

19434

04-05-06

3.5 / 6.0

Ø mm interior bag mouth quantity

1.6

20

bag weight

bag volume

0.05

0.001

19435

06-07-08

5.3 / 7.6

2.7

20

0.06

0.001

19436

08-09-10

7.2 / 9.7

3.6

20

0.09

0.001

19535

10-11-12

9.3 / 12.2

5.5

20

0.11

0.001

Ø crest min. Ø crest max.

Non-return valve Material: polypropylene. Autoclavable. Maximum work pressure: 2 BAR (2 Kg/cm2). Minimum work pressure: 0,07 BAR, at 20ºC.

Ø valley min. Ø valley max.

code

Ø ext valves

Ø mm valley max/min

bag quantity

bag weight

bag volume

19418

8-9-10

7.8 / 10.1

10

0.06

0.001

Flow indicator (1) Material: SAN. Perfectly transparent. The rotation of the red ball allows an immediate visual indication of glass or liquid flow. Very useful for connecting tubes of different diameter from 6.5 to 10 mm. code

lenght mm

Ø mm

bag quantity

bag weight

bag volume

19538

102

57

5

0.07

0.001

1

Flow indicator-paddle wheel (2) Material: SAN. Not for use with corrosive fluids or temperatures over 85ºC. code

dimensions mm

tubing mm

bag quantity

bag weight

bag volume

19539

8 x 17 x 40

6-11

5

0.10

0.001

2

277


278

12. GENERAL LABWARE

Wash bottles Made a combination of high and low density polyethylene. Transluscent bottle, with HDPE cap (blue), delivery tube and seal cap (natural). Bottle caps are ribbed for a better handling. High resistance to all liquids, acids and bases. Include a large neck for safe and easy filling.

code

capac. ml

neck mm

base mm

height case mm quantity

case weight

case volume

44330000

250

30

65

155

90

7.50

0.090

44300000

500

30

75

185

60

5.50

0.090

44310000

1,000

30

90

222

45

6.00

0.120

Wide mouth wash bottles Transluscent polyethylene bottles, with screw cap and delivery tube available in 3 different colours (blue, yellow and red) for easy identification. Feature a one piece cap and delivery tube assembly, thus eliminating air or liquid absorption through the cap. Include a wide neck for safe and easy filling. Ribbed caps for a better handling while opening and closing. Moulded-in graduations. 250 ml model is graduated in 25 ml increments, 500 ml model, in 100 ml increments. code

capac. ml

neck mm

base mm

height case mm quantity

191637

250

40

60

140

191638

500

40

75

165

case weight

case volume

10

0.80

0.014

10

0.90

0.016

Please indicate required cap colour: (04) blue, (06) yellow, (10) red.

Integral wash bottles Made of transluscent polyethylene. Feature a one piece cap and delivery tube assembly, which eliminates air or liquid absorption through the cap and ensures a positive leaktight seal. To increase liquid flow, cut the tip of the delivery tube; close the tip by means of the cap attached to the delivery tube. Caps are ribbed for a better handling while opening and closing. Tagging points on neck and cap for a tamper proof closure. Bottles include a fill in line. code

capac. ml

height mm

neck d/n std.

case quantity

case weight

case volume

191633

250

143

GL32

10

0.65

0.008

191634

500

181

GL32

10

0.80

0.015


12. GENERAL LABWARE Special materials: TEFLON This section details special products that are used in critical situations where glass is not suitable. TEFLON is a registered brand which refers to a type of polyethylene where hydrogen atoms have been replaced by fluorine ones, commonly called «fluocarbons». The main characteristic of these chemical compounds is their high resistance to nearly all chemical components including nitric acid. Some variants of TEFLON are: FEP, PFA... TEFLON main features: Unbreakable, resistant to almost all temperatures, resistant to almost all chemical products, except fluorine and other alkaline metals during fusion. Non flammable These TEFLON products are highly recommended for those cases where extreme conditions of transport and storage are required.

Low form graduated beakers Material: PFA. High chemical and temperature resistance (-250ºC / +270ºC).

code

capacity ml

div. ml

height ml

Ø mm

quantity

weight

volume

191537

250

50 / 1

96

67

1

0.05

0.001

191538

500

100 / 1

122

88

1

0.09

0.001

Wash bottles high resistance Material: FEP. High chemical and temperature resistance (-250ºC / +270ºC).

code

capacity ml

height mm

Ø mm

quantity

weight

volume

191693

250

157

61

1

0.06

0.001

191694

500

189

76

1

0.09

0.001

Beakers Material: PTFE. No graduation. High temperature and chemical resistance (-200 ºC / +270 ºC). code

capac. ml

Ø body mm

height mm

quantity

weight

volume

19718

100

54

68

1

0.03

0.001

279


280

12. GENERAL LABWARE

Magnetic stirring bars This section details our vast range of TEFLON magnetic stirring bars. A variety of different sizes and colours is available. Micro stirring bars: for use in the smallest containers. Cylindrical stirring bars: These are the most common and lend themselves to many general applications. The diameter of the bar chosen will depend on the diameter of the ďŹ&#x201A;ask used although it is recommended to select the largest stirring bar possible to achieve optimum results. Octagonal stirring bars with pivot ring: Ideal where the base of the container may be slightly curved or irregular. Triangular stirring bars: These are used primarily to help dissolve solids or sediments. Also used for higher viscous liquids. Ovoid stirring bars: Used in rounded bottom or Erlenmeyer ďŹ&#x201A;asks. Special shape stirring bars: Cruciform stirring bars are used in round bottom tubes.

Stirring bar retriever Polypropylene coated. For the removal of stirrer magnets from vessels of all kinds. Includes a magnetic tip, so it is easy to remove the magnets.

code

diameter mm

lenght mm

bag quantity

bag weight

bag volume

19919

10

300

1

0.03

0.0001


12. GENERAL LABWARE Micro stirring bars code

diameter mm

lenght mm

quantity

weight

volume

19850

2

2

1

0.04

0.0001

19851

3

3

1

0.04

0.0001

19852

2

5

1

0.04

0.0001

19853

3

6

1

0.04

0.0001

19749

2

7

1

0.04

0.0001

19854

1.5

8

1

0.04

0.0001

19855

3

8

1

0.04

0.0001

19856

3

10

1

0.04

0.0001

19857

3

13

1

0.04

0.0001

Cylindrical stirring bars code

Ă&#x2DC; mm

lenght mm

quantity

weight

volume

19753

3

6

1

0.04

0.0001

19748

3

8

1

0.04

0.0001

19750

4.5

12

1

0.04

0.0001

19751

6

15

1

0.04

0.0001

19756

8

20

1

0.06

0.0001

19757

8

25

1

0.06

0.0001

19758

8

30

1

0.06

0.0001

19763

6

35

1

0.06

0.0001

19764

8

40

1

0.06

0.0001

19698

8

50

1

0.06

0.0001

19705

10

70

1

0.08

0.0001

Triangular stirring bars code

dimenions mm

quantity

weight

volume

19782

9 x 35

1

0.08

0.0001

19783

12 x 50

1

0.08

0.0001

281


282

12. GENERAL LABWARE Octahedral stirring bars with pivot ring code

diameter mm

lenght mm

quantity

weight

volume

19809

8

13

1

0.04

0.0001

19786

8

15

1

0.04

0.0001

19810

8

22

1

0.06

0.0001

19787

8

25

1

0.06

0.0001

19793

8

28

1

0.06

0.0001

19788

8

38

1

0.06

0.0001

19794

8

51

1

0.06

0.0001

19797

10

51

1

0.08

0.0001

19799

10

64

1

0.08

0.0001

19811

13

75

1

0.08

0.0001

Colored octahedral stirring bars code

diameter mm

colour

lenght mm

quantity

weight

volume

19810.4

blue

8

22

1

0.06

0.0001

19787.4

blue

8

25

1

0.06

0.0001

19788.4

blue

8

38

1

0.06

0.0001

19788.10

red

8

38

1

0.06

0.0001

Ovoid stirring bars code

dimensions mm

quantity

weight

volume

19806

50 x 20

1

0.004

0.0002

Star-shapped stirring bars code

diameter mm

lenght mm

quantity

weight

volume

19784

10

8

1

0.08

0.0001


12. GENERAL LABWARE Cylindrical or assortment pack

octahedral

stirring

bar

Assorted cylindrical or octahedral stirring bars supplied in a convenient transparent plastic box including dividers for magnet classification. Box includes 2 units of the following stirring bars: Code 19400: (diameter x lenght in mm): 8 x 13, 8 x 15, 10 x 25, 10 x 38, 10 x 51 and 10 x 64. Code 19400.1: (diameter x lenght in mm) 6x10, 4,5x15, 6x20, 6x25, 6x30, 8x40, 8x50, 10x60, 10x70.

code

description

quantity

weight

volume

19400

box with 12 octahedrals stirring bars

1

0.25

0.0006

19400.1

box with 18 cylindrical stirrings bars

1

0.25

0.0006

One-hand timer 60 Minute times model “Onehand” Non-slip surface. Can be rewound with one hand only. code

description

Ø x h mm

quantity

weight

volume

19901

one-hand timer

72.5 x 29.5

1

0.21

0.0005

Digital timers Digital timer with hours, days and months, 24 h. programme facility, 60 seconds, alarm, includes clip and small bench stand. These digital timer count forward and down. Both include a LR44 battery. Code 900400 includes instructions in English and German an code 900600 includes instructions in Spanish, English and French. mod.

code

1

900600

2

900400

description digital timer with 2 memories digital timer with 1 memory

dimensions mm

quantity

weight

volume

64 x 61 x 14

1

0.11

0.0003

52 x 67 x 12

1

0.11

0.0003

new res featu

1

2

283


284

13. LABORATORY AND INDUSTRIAL PACKAGING


13. LABORATORY AND INDUSTRIAL PACKAGING

285


286

13. LABORATORY AND INDUSTRIAL PACKAGING

Polyethylene wide mouth jars with lid and insert plug High density Polyethylene jars with screw cap and insert plug. Jars and plugs are natural translucent colour; lids are black. Supplied uncapped (except sterile models, supplied capped and bagged). Upon request, jars can be supplied individually wrapped for a minimum order of 3 cases by model, and sterile for a minimum order of 6 cases by model. Ask for minimum quantity and delivery time for caps and jars in other colours. code

capacity ml

sterile, individual wrap

Ø internal mouth mm

Ø body mm

unitary weight g

height with lid mm

case quantity

case weight

case volume

pallet quantity

202811

30

25

32

4.2

53

100

1.00

0.011

14,700

202810

60

38

52

8.2

48

200

4.00

0.046

8,000

202808

90

51

60

8

51

150

3.80

0.046

4,800

202809

125

51

60

12

62

200

5.00

0.082

4,800

202801

170

51

60

14

80

160

4.70

0.082

3,200

202802

250

54

67

20

100

125

4.70

0.082

3,000

New 202802.1 202814

New 202814.1 202803

New 202823.1 202821

New 202821.O

250

yes

54

67

20

100

125

5.50

0.078

3,000

400

60

74

27.3

124

130

9.00

0.140

2,080

400

yes

60

74

27.3

124

130

8.00

0.140

2,080

500

67

80

35

131

120

8.40

0.140

1,920

500

yes

67

80

35

131

120

8.10

0.140

1,920

500

86

103

44.9

93

95

9.00

0.140

1,520

500

yes

86

103

44.9

93

95

9.20

0.140

1,520


13. LABORATORY AND INDUSTRIAL PACKAGING

code

capacity ml

sterile, individual wrap

Ø internal mouth mm

Ø body mm

unitary weight g

height with lid mm

case quantity

case weight

case volume

pallet quantity

202813

750

86

103

48

127

75

7.70

0.140

1,200

202813.1O

750

yes

86

103

48

127

75

7.40

0.140

1,200 New

202818

1,000

86

103

56.7

157

50

5.80

0.140

202828G

1,000

yes

86

103

56.7

157

50

7.00

0.140

800

202804

1,250

86

103

56.7

173

50

6.10

0.140

800

202815

1,550

86

113

64.6

181

45

6.00

0.140

720

202815B.O

1,550

yes

86

113

64.6

181

45

6.00

0.140

720

202820

2,000

86

103

83.1

283

35

5.80

0.140

560

202820.O

2,000

yes

86

103

83.1

283

35

6.10

0.140

560

202839*

2,000

105

128

73

205

32

4.00

0.140

512

* Supplied capped.

800

New

New New

287


288

13. LABORATORY AND INDUSTRIAL PACKAGING

Polyethylene beakers Volumes available range from 60 ml to 1,000 ml. All models come without lid, except the 1,000 ml beaker, which is available with or without lid. For use with liquid and solid samples. Manufactured in a flexible material for easy pouring. code

volume ml

body Ø mm

mouth Ø mm

height mm

weight body g

case quantity

case weight

case volume

242801

60

40

50

48

5.0

1,100

6.50

0.036

242802

100

40

55

58

6.5

1,000

7.20

0.026

242803

230

55

70

78

15.0

700

12.00

0.046

242804

275

53

72

98

22.7

500

11.42

0.047

242805

500

70

90

108

38.7

200

8.50

0.036

242806

1,000

90

120

132

63.2

120

8.40

0.036

242811*

1,000

90

120

132

65.0

65

6.30

0.036

* With lid. Beaker and lid are supplied in the same bag.

Disposable cups Disposable sample cups, for general sample collection. Cups are supplied stacked. case quantity

case weight

case volume

PP

84 x 50

11.34

0.100

PS

30 x 100

12.00

0.088

code

volume ml

material

202248

100

202317

150


13. LABORATORY AND INDUSTRIAL PACKAGING

Self sealing security jars Excellently finished, body and lid in autoclavable polypropylene. Screw cap with strips. Security sealing with tag for easy opening. Tamper evident system. External moulded ring. Smooth internal side. Each jar specifies on its bottom its capacity, and the material it is made of. Supplied uncapped. code

volume ml

body Ø mm

lid external Ø mm

height mm

weight ut. g

case quantity

case weight

case volume

pallet quantity

202911

100

54.1

61.5

53

11

150

3.95

0.045

6,000

202912

250

71.2

76.6

74

25

115

4.80

0.082

2,880

202913

350

70.5

76.6

101.5

30

80

4.28

0.082

2,080

202914

500

90.5

100.0

92.1

45

120

7.27

0.140

1,920

202915

1,000

105.3

116.2

130.2

80

60

7.13

0.140

960

202916

1,250

105.0

116.2

162.5

90

48

6.55

0.140

768

Polypropylene jars Excellently finished jars, ideal for cosmetic, pharmacy,… Smooth body and lid, manufactured in autoclavable white polypropylene. Screw closure. It is perfect for pomades thanks to its totally smooth interior side. External molded ring. Each jar specifies on its bottom its capacity, and the material it is made of. Supplied uncapped. code

volume ml

body Ø mm

lid external Ø mm

height mm

weight ut. g

case quantity

case weight

case volume

pallet quantity

202930

125

53

56

67

10

170

4.15

0.045

6,800

202931

310

76

81

81

30

100

4.60

0.082

2,400

202932

375

76

81

97

35

85

4.47

0.082

2,040

202933

625

90

96

114

60

110

7.27

0.140

1,760

202934

1,250

106

113

159

100

48

6.30

0.140

768

289


290

13. LABORATORY AND INDUSTRIAL PACKAGING

Leaktight buckets with lid Disposable containers made of polypropylene autoclavable. Include tight fitting and leakproof lids. All models, except the 1 l bucket, include a sturdy and convenient white plastic handle for easier carrying. Buckets are supplied with lid apart. Suitable for alimentary use. code

capacity ml

Ø ext. lid mm

Ø int. mouth mm

height mm

*body weight g

case quantity

case weight

case volume

222802

2.50

200.00

184.00

138

105.00

80

9.00

0.14

222803

4.40

225.00

210.00

156.00

134.00

48

10.40

0.13

222804

5.60

225.00

210.00

194.00

152.00

45

11.60

0.13

222805

10.70

268.00

253.00

263.00

314.00

20

10.50

0.13

* Weight with no lid and handle.

Jars with lid Body and lid in white autoclavable polypropylene. Self sealing security lid. 1.560 ml jar embodies a plastic handle. Jars are supplied uncapped. Cases per pallet: 24, excepting code 241010, palletised in 40 cases. Suitable for alimentary use. code

capacity Ø int. mouth x Ø base weight ml x height mm g

case quantity

case weight

case volume

241010

250

84.5 x 79.5 x 62

18

150

3.00

0.046

241011

550

107 x 98 x 80

32

250

5.00

0.082

241012

825

111.5 x 112 x 101.5

38

180

3.20

0.082

241013

1,000

112.5 x 112 x 137.5

46

150

4.20

0.082

241014

1,560

133.5 x 134 x 140

58

150

4.40

0.082


13. LABORATORY AND INDUSTRIAL PACKAGING

Buckets with spout Natural high density polyethylene buckets with a stainless metal handle. Include a spout for easier pouring. Moulded-in raduations. Very sturdy construction. These buckets may be printed with your name and logo. code

capacity l

dimensions mm

quantity

weight

volume

19905

9

270 x 200 x 250

1

0.50

0.009

19906

12

300 x 220 x 280

1

0.70

0.013

19907

15

340 x 250 x 310

1

1.00

0.019

The specified data may vary when changing to new models.

Industrial jugs Made of thick rigid polyethylene. Natural colour. Recommended for industrial use. code

capacity l

mouth Ø mm

height mm

weight ut. g

case quantity

case weight

case volume

470006

3

150

180

215

6

1.43

0.026

470007

5

190

240

400

6

2.21

0.028

case quantity

case weight

case volume

Round jugs with handle Polypropylene. Autoclavable to 121 ºC.

code

capacity l

graduation ml

Ø mm

height mm

470000

0.5

25

80

120

60

4.40

0.050

470001

1

50

125

140

48

4.60

0.080

470002

2

50

155

180

36

6.40

0.110

470003

3

100

165

180

27

7.28

0.130

470005

5

250

185

230

12

5.00

0.109

Minimum order quantity: 1.

291


292

13. LABORATORY AND INDUSTRIAL PACKAGING

Square containers with star-shaped caps Colour: translucent white. Containers and insert plugs made of high density polyethylene. Star-shaped screw caps made of polypropylene. Tagging points on neck and cap for a tamper proof closure or for labeling. All models have moulded-in graduations. Containers are supplied plugged and capped. Not recommended for liquids transport. code

capacity ml

graduation each ml

dimensions mm

neck Ă&#x2DC; mm

body weight g

case quantity

case weight

case volume

pallet quantity

444608

25

12.5

32 x 34 x 52

18

6

500

6.60

0.140

10,500

444609

50

10

38 x 38 x 70

23

15

400

7.50

0.140

9,600

444610

100

20

42 x 48 x 90

33

22

600

17.20

0.184

9,600

444611

250

50

57 x 60 x 110

33

32

300

13.80

0.184

4,800

444612

500

100

70 x 80 x 138

44

55

150

11.50

0.184

2,400

444613

1,000

100

80 x 103 x 176

58

97

80

14.00

0.190

1,280

444614

2,000

100

100 x 134 x 210

58

177

40

12.70

0.190

640

See more information in Chapter 8. Sample Containers.


13. LABORATORY AND INDUSTRIAL PACKAGING

Wide neck containers with star-shaped cap Made of high density polyethylene. Natural colour. Cylindrical container featuring a star-shaped screw cap. Tagging points on neck and cap for a tamper proof closure, or for labeling. Containers are supplied non capped. code

volume ml

internal mouth Ø mm

body Ø mm

height without lid mm

body weight g

case quantity

case weight

case volume

pallet quantity

44420000

60

23.2

42

80.5

13

200

3.40

0.048

8,000

44430000

125

29.5

52

103.5

18

100

3.80

0.048

4,000

44440000

250

37

65

128

24

120

5.60

0.087

2,880

44450000

500

47.4

82

152

40

60

5.30

0.087

1,440

44460000

1,000

59.4

102

183.2

90

55

8.00

0.140

880

44470000

2,000

59.4

123.5

244.5

128

30

6.00

0.140

480

body weight g

case quantity

Wide neck graduated containers with star-shaped cap Colour: translucent white. Bottles and insert plugs made of high density polyethylene. Star-shaped screw caps made of polypropylene. Tagging points on neck and cap for a tamper proof closure. Sloping shoulders for easy pouring. Bottles are supplied plugged and capped.

code

volume ml

graduation internal ml mouth Ø mm

body Ø mm

height mm

case weight

case volume

pallet quantity

19408

50

10

24

40

75

13.20

100

1.87

0.022

9,600

19409

100

20

24

50

90

18.30

100

2.37

0.031

4,900

19410

250

25

34

60

125

35.80

50

2.16

0.037

3,600

19411

500

50

34

75

160

50.70

20

1.20

0.024

1,120

19412

1,000

100

45

95

200

92.20

20

2.60

0.024

960

293


294

13. LABORATORY AND INDUSTRIAL PACKAGING Bottles with standard, narrow neck Bottles made of autoclavable, natural colour polypropylene. Hermetical closure. Suitable for food use. Easy opening and closing caps thanks to its size. Gripped, in order to ease its usage with gloves. Cap and body with holes for sealing or labeling. Neck and cap with vents. Graduation: 100 ml model, every 20 ml; 250 ml, every 25 ml; 500 ml and 1,000 ml, every 100 ml. code

neck DIN

191597 GL18

volume ml

body Ø mm

100

48

height body case case case mm weight g quantity weight volume

106

18.5

100

1.90

0.040

191599 GL25

250

60

148

33.1

5 x 50

10.00

0.190

191601 GL25

500

75

180

49.3

150

9.00

0.190

191603 GL32

1,000

95

222

100.9

80

8.80

0.190

Bottles with standard, wide neck Wide neck bottles made of autoclavable polypropylene, or polyethylene (not autoclavable). Body and caps in natural colour. Hermetical closure. Suitable for food use. Easy opening and closing caps thanks to its size. Gripped, in order to ease its usage with gloves. Neck and cap with vents. Graduation: 100 ml model, every 20 ml; 250 ml, every 25 ml; 500 ml, 1,000 ml, and 2,000 ml, every 100 ml.

MADE OF POLYETHYLENE, NOT AUTOCLAVABLE: code

neck DIN

191610 GL32

volume ml

body Ø mm

100

48

height body case case case mm weight g quantity weight volume

103

25.7

100

2.84

0.031

191612 GL45

250

60

140

39.2

5 x 50

10.30

0.190

191614 GL45

500

75

168

55.9

5 x 25

9.30

0.190

191616 GL63

1,000

95

206

109.3

68

9.30

0.190

191618 GL63

2,000

120

249

145.2

30

6.30

0.190

MADE OF POLYPROPYLENE, AUTOCLAVABLE: code

neck DIN

volume ml

body Ø mm

height body case case case mm weight g quantity weight volume

191623 GL32

100

48

103

26.6

100

2.80

0.040

191625 GL45

250

60

140

40.8

250

10.60

0.190

191627 GL45

500

75

168

56.5

125

8.00

0.190

191629 GL63

1,000

95

206

100.2

68

8.84

0.190

191631 GL63

2,000

120

249

175.5

30

6.30

0.190


13. LABORATORY AND INDUSTRIAL PACKAGING Graduated narrow neck bottles Made of transluscent polyethylene. Designed for the storage of acids and bases. Include a ribbed screw cap for a better handling, and an insert plug. Feature sloping shoulders for easy pouring. Tagging points on neck and cap for a tamper proof closure and for labeling. Bottles have the following moulded-in graduations: code 19317, every 10 ml; 19319, every 20 ml; 19323, every 25 ml, 19324, every 50 ml, 19325 and 19326, every 100 ml. Supplied capped. volume ml

neck Ø mm

bottom Ø mm

19317

50

18

19319

125

18

19323

250

22

60

19324

500

22

75

code

height mm

case quantity

case weight

case volume

40

75

50

110

4 x 100

6.7

0.073

6 x 100

15.5

0.151

145

6 x 50

12.8

0.151

175

6 x 25

9

0.195

19325

1,000

33

95

220

4 x 20

9

0.184

19326

2,000

33

120

270

2 x 20

8.4

0.151

Minimum order quantity: 1 bag.

Graduated narrow neck opaque bottles Opaque cylindrical bottles made of dark grey polyethylene, designed for the storage of light sensitive liquids or solid substances. Include a black screw cap and an insert plug for a positive leakproof seal. Ribbed caps for a better handling. Heavy duty bottles, with sloping shoulders for easy pouring. Tagging points on neck and cap for a tamper proof closure. Body and cap with holes for sealing or labeling. Supplied capped.

code

volume ml

neck Ø mm

bottom Ø mm

height mm

case quantity

case weight

case volume

193241

500

22

75

175

6 x 25

9

0.195

193251

1,000

33

95

220

4 x 20

5

0.198

Minimum order quantity: 1 bag.

See page 278

Narrow neck, high resistance bottles Bottles made of translucent, white, high density polyethylene, designed for the storage of acids and bases. Blue screw cap on a combination of high and low density polyethylene. Screw caps are ribbed for a better handling. Sloping shoulders for easy pouring. Heavy duty bottles. Supplied uncapped. code

volume ml

neck Ø mm

bottom Ø mm

height mm

case quantity

case weight

case volume

44260000

250

30

65

155

90

7.50

0.087

44270000

500

30

75

185

70

6.50

0.087

44280000

1,000

30

90

222

50

6.70

0.120

295


296

13. LABORATORY AND INDUSTRIAL PACKAGING Polyethylene bottles Translucent cylindrical bottles made of high density polyethylene with PP screw cap and LDPE insert plug, designed for the storage of alcohol. Caps are ribbed for a better handling while working with gloves. Insert plugs are dispensed pierced. No graduation. Supplied uncapped. code

capac. ml

int. neck Ø mm

bottom height body case case Ø mm mm weight g quantity weight

case volume

pallet quantity

75

24.6

39.4

97.6

8

220

2.80

0.042

6,160

292303 125

24.6

45

106

10

140

2.60

0.043

5,600

292304 250

24.6

58

128

18

80

2.55

0.044

3,200

292305 500

24.6

73

160

31

100

4.90

0.110

1,200

292306 1,000

24.6

82

230

46

60

5.00

0.110

720

New 292300

Tamper evident bottles, tall models Translucent cylindrical bottles made of natural colour low density polyethylene, with blue tamper evident closures. Caps are ribbed for a better handling while working with gloves. Bottles specially designed with tamper evident rings to ensure a positive seal. Bottles are supplied uncapped. To fully seal them, screw cap in a normal way and then screw again to fully position the tamper evident ring. To open, unscrew cap. The ring, automatically broken, will remain on the neck of the bottle. body Ø mm

neck Ø mm

282303 125

48

37

105

16.2

282304 250

59

37

129

282305 500

66

37

200

282306 1,000

87

37

230

code

capac. ml

height body case case mm weight g quantity weight

case volume

pallet quantity

125

2.45

0.045

5,000

21.9

75

3.20

0.045

3,000

35.0

100

5.00

0.110

1,600

52.0

60

4.10

0.110

720

Screw cap containers with seal and dropper Made of white polypropylene. White watertight screw closing system with dropper-plug and blue security seal. Hermetical closure. Mouth diameter: 10.2 mm. Case volume: 0.114 m3. Supplied uncapped. code

volume ml

Ø base mm

height mm

body case weight g quantity

53020

20

24.6

65

3.50

53125

125

42.2

134.7

53250

250

50.8

167.3

53500

500

68.3

196.5

case weight

case volume

2,000

12.70

32,000

15.50

275

6.25

4,400

21.50

200

5.95

3,200

41.00

100

5.50

1,600


13. LABORATORY AND INDUSTRIAL PACKAGING

C

B A

Rectangular bottles Body and cap made of polyethylene. Bottles with blue screw caps, including seal ring and internal joint. Tamper evident system. Body in natural colour, graduated (moulded): 250 ml model, graduated each 50 ml. 500 and 1,000 ml models, graduated each 100 ml. Supplied uncapped.

Internal joint

Gripped for a better handling

Tamper evident

code

volume ml

internal mouth Ø mm

dimensions (A x B x C) mm

weight g

case quantity

case weight

case volume

pallet quantity

292819G

250

30.3

58 x 58 x 115

21

210

6.0

0.096

3,360

292820G

500

30.3

77 x 77 x 130

35

153

9.7

0.140

2,448

292821G

1,000

30.3

96 x 75 x 184

62

90

6.4

0.140

1,440

Nozzle bottles Cylindrical bottles with screw caps, made of high density polyethylene, with a narrow nozzle design. Natural colour. Cut the nozzle tip with scissors before liquid dispensing. No graduation. Bottles and caps are supplied in separated bags. code

volume ml

neck Ø mm

bottom Ø height mm mm

case quantity

case weight

case volume

272301

50

20

35

75

160

2.10

0.026

272303

125

20

48

100

135

2.65

0.049

272304

250

20

59

143

75

2.55

0.049

297


298

13. LABORATORY AND INDUSTRIAL PACKAGING

Squared bottles Bottles with screw cap and insert plug, made of polyethylene. Bottles and insert plugs are white (transluscent), caps are red. Ribbed caps for a better handling when using gloves. Supplied capped. code

volume ml

mouth Ø mm

dimensions mm

weight g

case quantity

case weight

case volume

pallet quantity

292818

150

37

50.5 x 50.5 x 88

15

300

6.9

0.096

4,800

292819

250

37

58 x 58 x 103

21

210

6.0

0.096

3,360

292820

500

50.5

77 x 77 x 116

35

165

9.7

0.140

2,640

292821

1,000

50.5

96 x 75 x 172

62

90

6.4

0.140

1,440

See sterile models on Chapter 1. Microbiology.

Polyethylene bottles Rectangular body and cap made of polyethylene. The smaller sides are gripped for a better handling. The bigger sides are flat for labelling. Self-sealing blue cap with internal security ring. Hermetical closure. Tamper evident system. Supplied uncapped. code

volume ml

dimensions mm

int. mouth body case case Ø mm weight g quantity weight

282310

500

83 x 65 x 135

28

40

123

282311 1,000 83 x 65 x 235

28

61

73

case volume

pallet quantity

5.55

0.11

2,460

4.93

0.11

1,460


13. LABORATORY AND INDUSTRIAL PACKAGING SPECIAL MATERIAL: PET Polyethylene Terephthalate PET PET is a thermoplastic polymer resin of the polyester family that is used in synthetic ďŹ bers. Its monomer can be synthesised by the esteriďŹ cation reaction between terephthalic acid and ethylene glycol with water as a byproduct; or the transesteriďŹ cation reaction between ethylene glycol and dimethyl terephthalate with metanol as a byproduct. Polymeration is through a polycondensation reaction of the monomers with ethylene glycol as the by product. Its chemical formula is: [-CO-C6H6-CO-O-CH2-CH2-O-]. The PET resin used in packaging industry is obtained through ethylene and paraxylene, both derived from petrol. The SPI system identiďŹ es PET packaging with the number one or the acronym PETE (surrounded by the three arrows symbol) on the base of the bottles. PET has a low vitreous transition temperature (when an amorphous polymer gets soft), so it is recommended to maintain PET products under 40ÂşC (50ÂşC maximum).

Characteristics and properties: s7ORKINGTEMPERATUREFROM TO Â&#x17D;# s6ERYLIGHTWEIGHT s(IGHDEGREEOFTRANSPARENCYANDBRILLIANCE s(IGHDEGREEOFRESISTANCETOATTRITION s,OWSCRATCH RESISTANCE s6ERYGOODGLIDECOEFlCIENT s%XCELLENTMECHANICALRESISTANCETOCOMPRESSIONANDFALLS s)TKEEPSCONSTANTTHEmAVOURANDTHEAROMAOFFOOD s'OODBARRIERVERSUSGASESFOREXAMPLE #/ s'OOD GENERAL RESISTANCE TO OILS AND FATS IN FOOD DILUTED solutions of mineral acids, alkalis, salts, soaps, aliphatic hydrocarbons and alcohols s,OWRESISTANCETOHALOGENATEDSOLVENTS AROMATICSANDLOW molecular weight ketones s#ANBESTERILISEDBYRADIATIONORETHYLENEOXIDE sRECICLABLE

Wide mouth, squared jars Wide mouth transparent jar made of PET, manufactured in a clean room (Class FDA 1,000 - ISO 6) with white ribbed cap made of polypropylene with internal joint. Specially designed for an easy handling with just one hand. Caps and joints are supplied non assembled in a separated case. Suitable for alimentary use. Internal mouth diameter mm: 55. code

nominal total volume volume ml ml

dimensions mm

levels per body pallet weight gr

jars per level

bags per level

jars per bag

jars per pallet

jars pallet weight

jars volume pallet

cap & joint case weight

cap & joint case volume

299500

500

510

75 x 75 x 122

44

8

208

2

104

1,664

88

1.44

15.0

0.15

2991000

1,000

1,080

85.5 x 85.5 x 190

69

10

154

2

77

1,540

126

2.40

13.9

0.14

2991500

1,500

1,575

99 x 99 x 210

72

10

240

2

117

1,200

106

2.64

10.8

0.11

Minimum order quantity: 1 pallet.

299


300

13. LABORATORY AND INDUSTRIAL PACKAGING

PET Packer Inviolable cap flat top Caps and joints are supplied non assembled in a separated case. Suitable for alimentary use. Not suitable to transport liquids. code

nominal volume ml

total volume ml

body Ø mm

height mm

body case flasks case weight gr quantity weight

295100

100

117

47

86.5

22

450

295150

150

170

50

104

22

300

295200

200

203

58.5

109

31

225

flasks case volume

flasks case pallet

cap and joint case weight

cap and joint case volume

11.1

0.108

16

2.0

0.01

7.8

0.108

16

1.4

0.01

8.2

0.108

16

1.0

0.01

Minimum order quantity: 1 case.

1

4

2

5

3

6

All volumes can be manufactured in color: mod.

body

cap

1

amber

gold

2

green

gold

3

blue

blue

4

white

white

5

black

black

6

red

gold

Minimum order quantity: 2 pallets per color.


13. LABORATORY AND INDUSTRIAL PACKAGING

Syrup bottles Bottles made of transparent PET. Tamper evident, ribbed cap made of white high density polyethylene; DIN 28. Cap with internal joint. Suitable for alimentary use. Internal mouth diameter mm: 21.5 Bottles and caps supplied separately inside the same box. They can also be supplied in amber and opaque white colour (please ask for minimum order quantity). Supplied uncapped.

code

nominal volume ml

total volume ml

Ă&#x2DC; body mm

heigh mm

body weight gr

case quantity

case weight

case volume

288060

60

64

38

96

12

480

8.77

0.183

288100

100

108

44.2

106

16

350

7.25

0.183

288150

150

162

49

126

18

440

10.80

0.183

288200

200

216

52

145

24

360

11.27

0.183

288250

250

270

58

147.70

24

280

9.10

0.183

288500

500

530

75.5

161

34

225

9.97

0.247

2881000

1,000

1,030

88.60

219.50

47

72

5.23

0.247

301


302

13. LABORATORY AND INDUSTRIAL PACKAGING

Medicine bottles Bottles made of transparent PET, manufactured in a clean room (Class FDA 1,000 - ISO 6). Tamper evident, ribbed cap made of white high density polyethylene; DIN 28. Caps are supplied in a separated case. Suitable for alimentary use. Internal mouth diameter mm: 21.5

SUPPLIED IN PALLET: code

nominal total volume ml volume ml

body Ă&#x2DC; mm

height mm

body levels per bottles weight gr pallet per level

bags per level

bottles per bag

bottles aprox. pallet per pallet weight

pallet volume

cap case weight

cap case volume

297500

500

540

78.5

153

34

7

154

2

77

1,078

57

1.15

4.9

0.03

2971000

1,000

1,040

88.5

216

49

5

120

2

60

600

50

1.15

2.7

0.02

Minimum order quantity: 1 pallet.

Bottle with screen and childproof cap Bottle with screen and childproof cap. Made of white colour high density polyethylene. It embodies a graduated screen (up to 900 ml) which allows the user to see the content. Childproof, tamper evident, ribbed screw cap with insert plug (see how to use a childproof cap in page 168). Suitable for alimentary use. Bottles are supplied non screwed.

code

volume ml

202502 1,000

total volume ml

Ă&#x2DC; x height mm

body weight g

1,120

87.5x226.5

65

case case quantity weight

74

5.4

case volume

pallet quantity

0.14

1,184


13. LABORATORY AND INDUSTRIAL PACKAGING

push

turn

Drums with screen and childproof cap Made of white colour high density polyethylene. They embody a handle and a graduated screen which allows the user to see the content. Childproof, tamper evident, ribbed screw cap with insert plug (see how to use a childproof cap in page 168). Suitable for alimentary use. Drums are supplied non screwed. code

capacity ml

total capacity mm

Ø internal mouth mm

202501

1,000

1,100

21.4

202505

5,000

5,260

34.5

dimensions mm

body weight g

case quantity

case weight

case volume

pallet quantity

61 x 132.7 x 194.5

58

133.8 x 192.5 x 391

170

85

6.8

0.14

1,360

16

3.25

0.14

256

Cylinder with handle Made of polypropylene. The handle provides a secure, solid grip for superior control, specially when handling large volumes. Pouring is safer and more convenient, as the cylinder is specially designed to ensure a total liquid delivering. 89 x 29 mm hand opening for easy handling. Hexagonal base to prevent tipping and rolling. Accurate and easy to read graduated double scale on the cylinder. Autoclavable at 121ºC.

code

volume l

graduation ml

height mm

bottom Ø mm

Ø cylinder int. mm

Ø cylinder ext. mm

quantity

weight

volume

191578

1

10

440

146

59

64

1

0.62

0.020

191579

2

20

490

161

81

87

1

0.79

0.020

303


304

13. LABORATORY AND INDUSTRIAL PACKAGING

Stackable drums with tamper evident caps Made of natural colour high density polyethylene. They embody a handle and a tamper evident, ribbed screw red cap, made of HDPE, with internal joint and internal security ring. Hermetical closure when the cap is totally screwed. ONU ADR compliant. Suitable for alimentary use. Drums and caps are supplied non screwed. code

capacity ml

total capacity mm

minimum wall tickness mm

dimensions mm

quantity

weight

volume

pallet quantity

206020

20,000

20,900

1.20

242 x 298 x 365

1

1.00

0.026

48

206025

25,000

25,550

1.20

242 x 298 x 443

1

1.20

0.032

48

Wide mouth drums with security cap Made of high density polyethylene. Translucent natural color. Self-sealing green screw cap in polyethylene, with white insert plug. It features a black folding handle.

code

capacity l

Ă&#x2DC; external body mm

Ă&#x2DC; internal mouth mm

height mm

quantity

weight

volume

pallet quantity

202616

5

169

105

288

1

0.22

0.0065

256


13. LABORATORY AND INDUSTRIAL PACKAGING

Stackable drum with security cap Made of high density polyethylene. It is provided with a sealing screw cap with grip. This drum has four flat sides suitable for sticking information labels. They are distinguished by two main characteristics: they can be easily stacked joining the tops and the bottoms together, and they can be palletised thanks to their reduced overall dimensions. All of them are ONU compliant, meeting all the standards for the transport of hazardous, toxic and noxious products. capacity l

code

dimensions mm

Ø mouth mm

quantity

weight

volume

pallet quantity

202605

5

198 x 148 x 240

44

1

0.250

0.006

200

202610

10

224 x 193 x 305

44

1

0.450

0.013

100

202620

20

245 x 295 x 375

44

1

0.900

0.027

48

202625

25

245 x 295 x 435

44

1

1.100

0.031

48

202630

30

332 x 290 x 428

49

1

1.300

0.041

36

Storage bottles Bottles and caps made of high density polyethylene. Wide neck bottle (natural colour, translucent) with screw cap (black and blue). It features a double cap: it includes a blue internal cap that works as a plug. Ribbed cap for a better handling. Bottles include a sturdy aluminium handle for easy carrying. Not suitable to transport liquids. code

capacity mouth Ø body Ø l mm mm

height unitary case case mm weight g quantity weight

case pallet volume quantity

202825

5

100

175

275

190

14

4.9

0.14

224

202826

10

100

215

340

380

6

4.5

0.14

96

305


306

13. LABORATORY AND INDUSTRIAL PACKAGING Drums with tap Made of high density polyeythylene. Heavy duty drums, wall thickness 2 mm. Can be used at temperatures below 0 ºC. The tap includes a seal ring to ensure a leakproof seal. Each drum includes a screw cap and a plug for added security. With two handles for easy transport. Drums are supplied complete with tap (also available spare tap). capacity l

code

Ø neck mm

Ø base mm

height mm

quantity

weight

volume

19660

5

47

165

335

1

0.45

0.008

19662

10

55

210

395

1

0.60

0.012

1

0.20

0.001

Spare tap: 19375

Wide and narrow neck drums Heavy duty drums made of high density polyeythylene. Include an insert plug for a positive leakproof seal, and one handle for easy carrying. Tagging points on neck and cap for a tamper proof closure or for labelling. Wide mouth drums are designed both for liquids and powders, easy to fill and pour.

WIDE NECK BOTTLES (1) code

capacity Ø neck l mm

Ø body mm

height quantity weight mm

volume

pallet quantity

191640

5

90

165

305

1

0.45

0.008

200

191642

10

120

210

395

1

0.95

0.017

90

volume

pallet quantity

0.018

90

NARROW NECK BOTTLES (2) code

191646

capacity Ø neck l mm

10

53

Ø body mm

210

height quantity weight mm

420

1

0.95


13. LABORATORY AND INDUSTRIAL PACKAGING

Wide mouth storage drums with tap and plug Body and cap made of polyethylene. Screw cap, green colour, with non hermetical plug. They embody a tap, and two black folding handles at the top. Not designed to transport liquids. External mouth diameter: 150 mm. code

capacity ml

Ă&#x2DC; base mm

height mm

quantity

weight

volume

pallet quantity

209030

30

320

470

1

1.57

0.037

24

209050

50

380

620

1

2.09

0.070

18

Funnels Material: polypropylene. Autoclavable. code

Ă&#x2DC; mouth mm

quantity

weight

volume

194171

80

1

0.02

0.0004

194172

100

1

0.02

0.0005

194173

120

1

0.04

0.0006

194175

180

1

0.13

0.0006

194176

220

1

0.30

0.0015

194177

260

1

0.40

0.0020

194178

300

1

0.50

0.0022

307


308

13. LABORATORY AND INDUSTRIAL PACKAGING

Industrial drums These drums are produced in high-molecular weight polyethylene Their particular top, which has a perfectly stiffened rim obtained during the moulding phase, prevents the opening from becoming deformed and the lid from becoming detached as a consequence of any drops or violent shocks. They feature a metal washer that ensures a perfect closure where is also suitable to place a tamper evident seal. Thanks to their airtight seal, they are suitable for transport by sea, road or railway and, thanks to their construction characteristics and qualities; they fully meet the current ONU ADR standards for transport of hazardous toxic and noxious products. Incinerable (excluding the metal closure) These drums are produced using selected top-quality raw materials, they feature excellent drop-impact resistance even at low temperature (-20°C) and stability against corrosion from chemical agents which may cause stress cracking. Their internal surface is perfectly smooth, and this makes it easy to fully empty and completely clean the inside from any powder, paste or semi-dense products. Codes 208030 and 208060 have two handles for easy carrying. code

capacity l

body Ø mm

mouth Ø mm

height mm

quantity

weight

pallet quantity

208030

30

320

252

502

1

1.17

24

208060

60

405

327

610

1

2.10

18

208128

128

500

378

786

1

4.10

10

Large deep trays Made of natural high density polyethylene. Stackable. Include ergonomically designed handles. code

dimensions mm

height mm

tray volume l

quantity

weight

19603

550 x 430

310

50

1

1.80

19604

630 x 440

340

65

1

2.20

19605

720 x 470

360

90

1

3.10


INDEX

The technical data (dimensions, capacities and resistances) speciďŹ ed in this catalogue are approximated. The resistances (to chemical products, temperature, centrifugation...) may suffer variations depending in external conditions. We recommend to test the product under the forecasted conditions of use. Please do not hesitate to ask for samples if necessary.

309


310

INDEX citrate for coagulation

72

ABS trays

271

closed E.S.R system (micro system)

74

absorvent paper

252

Cobas Mira cuvette segments

82

acetal polymer racks

226

coloured adhesive tapes for sample

acid boric container

153

adhesive labels

248

composed disconnectors/connectors

277

adhesive sealing film for PCR plates

60

concentrated deodorant Nilodor

253

alcohol pads

255

cone Imhoff

265

aluminium racks

231

conical measuring flasks

263

aluminium sealing foil

60

conical tubes

Amies swab

21

anaerobiosis jar

26

connectors

276

antiacid trays

271

contact plate Rodac

27

container with boric acid

153

A

anticoagulants and preservatives in

identification

248

32-35,128,132, 133,135,136

78

containers for sampling

119

autoclave resistant bags

116,246

containers with seal and dropper

296

automatic slide dispenser

108

Coplin type staining jar

104

AYRE spatula

117

Coulter counter cups

82

containers

cover slides

99

39

Cryoinstant porous beads

29,207

bag with or without filter

39

cryovials

bags

112-116

bags for autoclave

246

cryovials, canes

149,203

bags for Stomacher

38,39

cryovials, caps

149,203

114

cryovials, colour codes inserts

148,202

bags, Whirl-pack

112,113,115

culture tube cap

138

basket for blood collection

238

culture tubes

32,136

baskets for autoclave

237

cuvette racks

222

beakers

279

cuvette segments, Cobas Mira

82

beakers for cell counters

83

cylinder with handle

303

Beckman microtube

142

cylindrical container

165

bed pan

253

cylindrical slide mailer

107

blisters for transport of samples

118

cytology brush

117

blood collection tubes

76

dessicator discs

268

blood group test plate

73

bottle carrier with folding handlers

236

Digralsky spreader

30

bottle with screen and childproof cap

302

drums

303-308

bottles

292-302

drums with screen and childproof cap

303

bottles for sterilization

246

drums with tap

306

bottles with standard, narrow neck

294,295

drying rack

271,272

B bag for homogenisers

bags Zip-lock ®

48,148,149,202, 203

D

bottles with standard, wide neck

294

bottles, tall models

296

E.S.R citrate tube

73

Büchner, funnels

265

E.S.R system

75

buckets

86,290,291

E.S.R with self-leelling system

74

burette clamps

266

Edta tubes: dipotassium

72

Edta tubes: tripotassium

71

79

Edta: tripotassium rubber cap

71

8,49,146,147,

emergency eyewash bottle

250

204,205

Erlenmeyer flasks

261

C capillary tubes sealing wax caps for microtubes4

E

caps for vials

141

cardboard waste containers

245

filter paper

Cary Blair swab

22

flask weight ring

267

cassettes

89-93

flasks, Erlenmeyer

261

cassettes, storage

94,95

flow indicator

277

Chlamydia, swab for

23

forceps

89,116

F 252


INDEX freezing cardboard storage box

212

microtubes

48-50,142-147

funnel holder

265,266

microtubes for centrifuge

142-145

funnels

264,265

mounting medium for microscopy

100

funnels, BĂźchner

265

Multifunction bag

114,137

glass dessicator

268

N Nilodor: concentrated deodorant

253

glass homogenisers

38

non return valve

277

glass Pasteur pipettes

199

non sterile swabs

17

glass tubes

138-140

glass water still

269

one-hand and digital timers

283

gloves

116,256,257

opaque bottles

295

graduated beakers

262,263,279

G

O

P parafďŹ n

H

88

haematological stains

79

Pasteur, glass pipettes

199

Heparin Lithium, tubes

70

Pasteur, plastic pipettes

191-195

hinged lid containers

169

PCR racks

219-221

histology mould

88

PCR sealing mat

60

homogenisers,bags for

38,39

PET packer

300

hospital swabs

255

Petri dishes

24-28

hygienic aerosol

254

Petri dishes, baskets

26,239

Petri dishes, incubation tray

28

Imhoff, cone

265

Petri dishes, racks

26

incubation racks

216

pipette and burette rinsing set

272

industrial drums

308

pipette pump suport rack

249

industrial funnels

307

pipette pumps

36,197,249

instrument trays

236

pipette racks

222

isofreeze racks

217

pipette stand

267

isothermal bags

119,137

pipette trays

198,271

pipetting bulb

36,196,197,199,

I

J

248,249

jar for samples

86,87

jars

289,290

pipetting reservoir

186

jugs

291

plastic dessicator

268

plastic Pasteur pipettes

191-195 54-63

L laboratory holders

276

plates for PCR

laboratory spatulas

270

polycarbonte racks for cryovials

208,209

large deep trays

308

polyethylene beakers

288,291

leakproof bags for sample storage

115

polyethylene bottles

298

lids for casettes

89

polyethylene caps

129-131

Long-handled dippers

44,120

polypropylene tubes

126

loops

30,31

polystyrene tubes

127

porous beads, Cryoinstant

29,207

M macrotip

187-189

magnetic stirring bars

280-282

racks for bags

mailing container

73,118

racks for cryovials and microtubes

R 239 208-218,222,227229

measuring cylinders

260

measuring scoops

270

re-caps

132

meat or turkey carcass sampling kit

41,112

rectangular base for burettes

266

medicine bottles

302

rectangular containers

166

medicine cups

168

reticulocyte staining kit

78

metal tray histology

88

reversible racks

214,217,223,226

microhaematocrit capillary tubes

79

RitipsÂŽ

190

micropipettes, tips for

172-189

Rodac, contact plate

27

microscope slide labels

100

Rodac, rack

27

microtitre plates

28

rotary pipette stand

268

microtube, Beckman

142

round bottom polystyrene tubes

124

311


312

INDEX stirring bar retrievers

280

safety containers

242-245

Stomacher bags

38,39

safety glasses

250

stopcock, straight bored

277

safety labelling

243

Stuart swab

22

safety lock microtubes

144

surfaces sampling kits

40

sample container

152-169

swab for Chlamydia

23

sample cups

82,83

swab for virus

23

sample storage system

62,63

swab, Amies

21

scintillation vials

83

swab, Cary Blair

22

screw cap tubes, round bottom

34,134,137

swab, Stuart

22

screw caps for tubes

140

swabs, hospital

255

screw thread microtubes

146,147,204,205

syrup bottles

301

S

screw thread tamper evident microtubes 146,206

T

screw threaded vials

141

test tube baskets

222

security screw cap containers

87,164,168

test tube tongs

270

serological pipettes

37,196-198

tips for micropipettes

172-189

serum glucose serotub

69

tissue embedding sponge

88

serum separator tubes

67,68

tongue depressors

252

silicone mat

274

transport media, swabs

21-23

silicone sheets

274

transport swabs with media

20-23

silicone tourniquet

69

tube for PCR

51-54

silicone tubing

274,275

tubes

124-140

single use racks

226

tubing clams

275

single use straw-like pipettes

198

slide mailer

106,119

universal reversible caps

132

slide storage boxes

107,108

universal test tube racks

224,225

slide tube mailer

106,107

urine collection bottle

253

slides storage system

109

urine container set

162,163

slides trays

105

slides, glass

98, 99

vacuum pump

slides, racks and jars

104

U

V 267

vaginal speculum

117

sodium thiosulfate sterile bags Whirl-pakÂŽ 44

virus, swab for

23

spatula, AYRE

117

volumetric ďŹ&#x201A;ask

261

special pedriatrics tubes

76

special techniques

78

wash bottles

251,279

specimen transport kangaroo bags

115

watch glasses

273

spectophotometer cuvettes

81

water control: absence/presence

spreader,Digralsky

30

square containers

292,297,298

weighing bottles

squared containers

121,167

weighing dishes

273

stackable drums

304,305,306

Whirl-packÂŽ bags

112,113,115

staining

100-104

wide mouth drums

304,307

staining jar, Coplin type

104

wide mouth jars

86,286,287

stainings racks for microscope slides

239

wide mouth wash bottles

278

stainless steel baskets

236,237

wide neck containers

293,295-297

stainless steel racks

230-239

stainless steel water still

269

sterile bottles for water sampling

43,120

sterile jars for water sampling

42

sterile sawbs

18

sterile swab in tube

19,116

sterilization bottles

246

sterilization indicator strips

247

sterilization indicator tapes

247

stirring bar assortment pack

283

W

of Coliforms

45,120 273

Z Zip-lock bags

114


INDEX BY CODE CODE

100LG 100LM 100LP 100LSP 102LG 102LM 102LP 1164 120002 120003 120010 120100 120101 120102 120103 120104 120105 128030 1360 1361 15001 15003 15004 15005 15006 15007 191030 191031 191050 191051 191052 191055 191056 191057 191058 191059 191060 191062 191063 191064 191065 191066 191067 191068 191069 191070 191071 191087 191100 191101 191104 191105 191106 191107 191108 1911103 1911104 1911105 1911106 1911107 1911108 1911109 191219 191220 191221.1 191221.2 191221.3 191221.4 191221.5

PAGE

257 257 257 257 257 257 257 74 252 252 252 118 118 118 118 118 118 73 74 74,75 38 38 38 39 38,239 38,239 247 247 247 247 247 265 265 270 270 270 270 270 270 270 270 270 270 270 270 270 270 104 102 102 103 103 103 103 103 273 273 273 273 273 273 273 272 248 248 248 248 248 248

CODE

191221.6 191221/1 191221/2 191221/3 191221/4 191221/5 191221/6 191222 191223 19139 191395 191396 19140 191410 191411 191412 191414 191415 19145 19146 191460 191461 191462 191463 191464 191465 19147 19148 191484 191485 191486 191487 191488 191489 19150 19152 19153 191537 191538 191578 191579 191597 191599 191601 191603 191610 191612 191614 191616 191618 19162 191623 191625 191627 191629 191631 191633 191633 191634 191637 191638 19164 191640 191642 191646 19165 19166 19167 19168

PAGE

248 248 248 248 248 248 248 247 247 266 267 267 266 276 276 276 276 276 264 264 261 261 261 261 261 261 264 264 261 261 261 261 261 261 264 264 264 279 279 303 303 294 294 294 294 294 294 294 294 294 264 294 294 294 294 294 251 278 251,278 251,278 251,278 264 306 306 306 264 265 265 265

CODE

19169 191693 191694 19170 19171 19172 191720 191721 191722 191723 191724 191725 191726 191727 19173 19174 19175 191821 191822 191823 191824 191825 191826 191827 191828 191829 19194 19195 19200 19201 19212 19213 19215 19217 19218 19219 19221 19222 19223 19230 19231 19232 19235 192470 192471 192472 192503 19252 19254 192561 192562 192563 192564 192565 192566 192567 192571 192572 192573 192574 192575 192576 192577 19262 19265 19266 19267 19268 19269

PAGE

265 279 279 265 265 264 262 262 262 262 262 262 262 262 264 264 264 262 262 262 262 262 262 262 262 262 199 199 36,199,249 36,196,248 271 272 272 272 272 272 272 272 272 268 268 268 268 267 267 267 82 198,271 268 260 260 260 260 260 260 260 260 260 260 260 260 260 260 267 267 266 266 266 266

CODE

19270 19274.5 19274.7 19276 19276.1 19276.A 19276.B 19277 19277.1 19277.A 19277.B 19278 19278.2 19278.3 19278.A 19278.B 19279.3 19279.5 19279.7 19280 19281 19282 19283 19284 19285 192922.04 192925 192931 192932 192933 192934 192935 19317 19319 19323 19324 193241 19325 193251 19326 19340 19345 19347 19351 19353 19354 19355 19360 19361 19371 19374 19376 19379 19384 19385 19386 19387 19400 19400.1 19408 19409 19410 19411 19412 194171 194172 194173 194175 194176

PAGE

257 109 109 108 108 107 107 108 108 107 107 108 108 108 107 107 109 109 109 271 271 271 271 271 271 88 255 88 88 88 88 88 295 295 295 295 295 295 295 295 273 273 273 102 103 103 102 104 104 277 277 277 277 250 250 250 250 283 283 293 293 293 293 293 264,307 264,307 264,307 264,307 264,307

313


314

INDEX BY CODE CODE

194177 194178 19418 19423 19424 19425 19434 19435 19436 19437 19438 19440 19441 19442 19443 19445 19452 19454 19455 19459 19460 19461 19462 19465 19467 19468 19500 19501 19503 19504 19505 19509 19510 19512 19513 19527 19530 19535 19538 19539 19540 19553 19554 19558 19558.M 19558.SP 19563 19564 19565 19566 19567 19568 19570 195701 195702 195703 195705 195706 195707 195709 195711 195713 19575 19576 19577 19580 19586 19591 19591/T

PAGE

264,307 264,307 277 263 263 263 277 277 277 265 265 265 265 265 265 265 273 273 273 276 276 276 276 276 276 276 89,116 89,116 89,116 275 275 270 276 276 276 276 276 277 277 277 108 268 268 269 269 269 225 225 225 225 225 225 225 271 271 271 271 271 271 271 271 271 44,120 44,120 44,120 269 253 253 253

CODE

19593 19594 19595 19596 19603 19604 19605 196102 196105 196110 196115 196302 196305 196310 196315 19660 19662 19698 19700 19705 19718 19748 19749 19750 19751 19753 19756 19757 19758 19763 19764 19782 19783 19784 19786 19787 19787.4 19788 19788.10 19788.4 19793 19794 19797 19799 19806 19809 19810 19810.4 19811 19850 19851 19852 19853 19854 19855 19856 19857 1988314 1988315 19901 199014N 199014RC 19905 19906 19907 199075 199076RC 199078N 199078RC

PAGE

270 270 270 270 308 308 308 38 38 38 38 38 38 38 38 306 306 281 236 281 279 281 281 281 281 281 281 281 281 281 281 281 281 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 281 281 281 281 281 281 281 281 83 83 283 178 178 291 291 291 187 181 177 177

CODE

199083 199084RC 19919 19920 19921 19922 19923 19924 19926 19930 19931 199620 19970 19971 19972 19973 19996 200000 200001 200002 200003 200004 200005 200006 200007 200008 200009 200009B 200009R 200010F 200010FR 200010FRB 200010FRX 200012 200012B 200012R 200015 200015RF 200016 200016B 200016R 200017 200017R 200018 200019 200019R 200021 200022 200024 200026 200028 200028R 200028RF 200029 200029F 200029R 200029RF 200032.0 200034 200037 200038 200050 200060 200062.0 200070 200070NR 200070R 200072 200074

PAGE

181 173 280 94 94 107 106 106 106 94 94 181 266 276 276 222 198,271 194 194 193 193 193 194 193 193 194 180 180 180 175 175 175 175 183 183 183 189 189 178 178 178 182 182 185 182 182 185 186 173 179 188 188 188 184 184 184 184 193 193 193 194 195 195 193 183 183 183 178 181

CODE

200075 200075RF 200076 200076F 200076R 200076RF 200077 200077F 200077FR 200077FRB 200077FRX 200077R 200078 200079 200079F 200079FS 200079R 200080.1 200080.1R 200082 200082F 200082NR 200082R 200083 200083R 200100 200102 200103 200120 200121 200122 200200 200200.4 200200.5 200201 200201.B 200202 200203 200204 200208 200209 200210 200214 200218 200219 200300 200301 200302 200303 200304 200305 200310 200311 200312 200318 200320 200321 200322 200325 200326 200329 200330 200332 200333 200338 200340 200341 200342 200343

PAGE

187 187 182 182 182 182 183 183 183 183 183 183 177 179 179 179 179 184 184 184 184 184 184 188 188 246 82 82 194 194 194 24 24 25 25 25 24 24 25 27 24 24 25 27 25 115 115 115 115 115 115 246 246 246 246 246 246 246 113 113 113 113 113 113 114,137 113 113 39,113 39,113


INDEX BY CODE CODE

200344 200345 200346 200347 200349 200351 200356 200357 200358 200359 200361 200363 200364 200365 200372 200373 200374 200376 200393 200393P 200394 200396 200397 200400 200400P 200401 200405 200407 200410 200420 200500 200510 200VG 200VM 200VP 201020 201040 201110 201250 202248 202317 202501 202502 202505 202605 202610 202616 202620 202625 202630 202801 202802 202802.1 202803 202804 202808 202809 202810 202811 202813 202813.1O 202814 202814.1 202815 202815B.O 202818 202820 202820.O 202821

PAGE

113 113 113 113 113 39,113 112 113 113 113 112 113 113 112 115 39 39 39 41 41 41 40 40 143 143 143 143 143 143 218 30 30 256 256 256 192 192 192 192 163,288 163,288 303 302 303 305 305 304 305 305 305 86,286 86,286 286 86,286 287 86,286 86,286 86,286 86,286 86,287 287 86,286 286 287 287 86,287 287 287 86,286

CODE

202821.O 202823.1 202825 202826 202828G 202839 202840 202841 202842 202843 202844 202845 202846 202847 202848 202911 202912 202913 202914 202915 202916 202930 202931 202932 202933 202934 202VG 202VM 202VP 206020 206025 208030 208060 208128 209030 209050 210002 210003 210004 210005 210006 210022 210023 210024 210030 222802 222803 222804 222805 232801 232802 232806 232808 232809 232810 232811 240007 240011 240021 240028 240035 240065 241010 241011 241012 241013 241014 241400 241400R

PAGE

286 286 305 305 287 287 164 164 164 164 164 87 87 87 164 289 289 289 289 289 289 289 289 289 289 289 256 256 256 304 304 308 308 308 307 307 195 195 195 192 195 195 195 195 192 86,290 86,290 86,290 86,290 244 244 244 244 244 244 244 242 243 243 243 245 245 86,290 86,290 86,290 86,290 86,290 242 242

CODE

241500 242000 242801 242802 242803 242804 242805 242806 242811 244000 246000 250050 260000 27 270045 272301 272303 272304 28 282300 282303 282304 282305 282306 282310 282311 282320 282321 282323 282323.BU 282324 282324.BU 282330 282331 282333 282334 282340 282341 282350 282351 282352 288060 288100 2881000 288150 288200 288250 288500 29 29/1 292300 292303 292304 292305 292306 292604 292818 292819 292819G 292820 292820G 292821 292821G 295100 295150 295200 2971000 297500 2991000

PAGE

242 242 288 288 288 288 288 288 288 242 242 245 244 75 245 297 297 297 75 45 296 296 296 296 298 298 43 43 43 43 43 43 43 43 43 43 42 42 42 42 42 301 301 301 301 301 301 301 74 74 296 296 296 296 296 44 298 298 297 298 297 298 297 300 300 300 302 302 299

CODE

2991500 299500 300100 300200 300201 300202 300203 300205 300210 300211.1 300230 300232 300234 300236 300237 300243 300244 300250 300250.1 300251 300252 300253 300259 300260 300261 300263 300268 300270 300280 300280.2 300281 300281/1 300284 300285 300287 300290 300291 300294 300295 300297 300299 3003 300300 300400 300500 300700 300700 300702 300704 300705 300800 300800.1 300800.2 300804 300807 300808 300900 300904 300907 300908 301-01 301-01F 301-01FR 301-01FRB 301-01FRX 301-01R 301-09 301-10 301-11

PAGE

299 299 125 18 18 18 18 17 18 18 17 17 255 255 255 17 17 19 19 19 19 19 19 17 19 19 17 17 22 22 21 21 21 21 21 22 22 23 22 23 23 129 124 124 124 125 127 127 127 125,127 124,127 124 124 127 32,136 32,136 125,127 127 127 127 174 174 174 174 174 174 174 174 174

315


316

INDEX BY CODE CODE

301200 301201 301202 301212 301213 301402 301403 301700 302000 302100 302400 302703 302704 302723 302724 302740 302741 302742 302750 302751 302752 302762 302764 302771 302772 302780 302792 302794 303100 303101 303102 303103 304000 3050 3053 3055 3058 305807 3066 3070 3071 307107 3072 3081 308107 3082 308502 308506 308602 308606 308702 308705 308706 309201 309202 309222 309222.1 309222.O 309316 309316.E 309318 309324 309324.E 309324.E3 309402 309501 309502 309526 309526.8

PAGE

128 128 128 128 128 34,134 34,134 125 81 81 81 31 31 31 31 31 31 31 31 31 31 30 30 30 30 30 30 30 81 81 81 81 81 129,130 129 129,130 129,130 127 129,131 129,131 129,130 127 129, 130 129 127 129,131 132 132 132 132 132 132 132 152 152 152 152 152 162 162 163 163 163 162 154 156 156 156 156

CODE

309552 309602 309602E 309752 309903 310200 310202 310211.1 310253.1 316-313.1 316-313.2 316-314.1 316-314.2 316-315.1 316-315.2 316-316.1 316-316.2 316-317.1 316-317.2 316-318.1 316-318.2 316-319.1 316-319.2 317-314.1 317-315.1 317-316.1 317-317.1 317-318.1 317-319.1 326-19 326-37 327-13 327-15 327-15B 327-15X 327-16 327-16B 327-16X 327-19 327-19B 327-19X 327-23 327-24 327-24B 327-24X 327-26 327-30 327-30R 327-30RB 327-30RX 327-33 327-33R 327-33RB 327-33RX 327-34 327-34R 327-34RB 327-34RX 327-36 327-36R 327-36RB 327-36RX 327-37R 327-37RB 327-37RX 327-40 327-40RC 330 330089

PAGE

156 152 152 158 160 18 18 18 18 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 173 174 175 177 177 177 184 184 184 173 173 173 176 176 176 176 179 183 183 183 183 178 178 178 178 178 178 178 178 176 176 176 176 174 174 174 180 180 223 186

CODE

330129 350002 350004 350013 350024 350034 350035 350037 350046 350048 350051 350057 350059 350069 350079 350115 350610 350612 350613 350710 350810 350812 350814 350815 350912 350915 351014 351420 351622 352030 359517 400400 400500 400700 400705 400800 400800.1 400900 400S 401100 401200 401201 401204 401301 401302 401402 401403 401410 401700 402001 402002 402005 402010 402020 402NG 402NM 402NP 407001 407001/T 407001O/T 407001OBT 407003 407005 407005.1 407005.O 407005/T 407006 407006/T 407008

PAGE

186 274 274 275 275 275 275 275 275 275 275 275 275 275 275 275 275 275 274 275 275 275 275 274 275 275 275 275 275 275 274 126 126 126 126 126 126 126 257 126 128 128 128 73,118 73,118 34,134 34,134 148,202 126 246 246 246 246 246 256 256 256 166 166 166 166 166 121,167 121,167 121,167 121,167 121,167 121,167 166

CODE

407008.O 407008OBT 408001 408001.1 408001.O 408001-86 408001O.2 408001O/T 408001OBT 408002 408003 408005 408025 408050 408100 408250 408500 408702 408702.G 408720 408721 408726 408726.G 409001 409002 409002.1 409003 409003.1 409003.2 409003A 409003AM 409003R 409003V 409004 409005 409007.M 409007.N 409008 409008.1 409008.M 409008.N 409009 409010 409011 409012 409025 409050 4091.1N 409100 409102.1 409103.1 409104.1 409105.1 409106.1 409106.2 409107 409107.1 409108 409108.1 409109 409109.1 409110 409110.1 409110.1T 409110.2 409110.2T 409110.3 409110.4 409110.4T

PAGE

166 166 165 165 165 165 165 165 165 63 63 63 260 260 260 260 260 161 161 161 161 161 161 148,202 148,202 148,202 148,202 148,202 148,202 148,202 148,202 148,202 148,202 63 62 48,146,204 48,146,204 62 62 48,146,204 48,146,204 62 62 62 62 262 262 144 262 149,203 148,202 149,203 148,202 148,202 149,203 148,202 149,203 148,202 149,203 148,202 149,203 149,203 48,146,204 50,146,206 48,146,204 50,146,206 48,146,204 48,146,204 50,146,206


INDEX BY CODE CODE

409110/1 409110/4 409111/2 409111/3 409111/4 409111/5 409111/6 409111/7 409111A 409111AM 409111B 409111R 409112/0 409112/1 409112/2 409112/4 409112/6 409113.1 409113.2 409113.3 409113.4 409113/1 409113/2 409113/3 409113/4 409113/5 409113/6 409115/2 409115/3 409115/4 409115/6 409120 409132 409133 409134 409135 4092.1N 4092.1NS 4092.2A 4092.2AM 4092.2N 4092.2V 4092.3N 4092.3NS 4092.5N 4092.6N 4092.6NS 4092.7N 409201 409202 409202.B 409222 409222.O 409250 4094.1A 4094.1AM 4094.1N 4094.1R 4094.1V 4094.2A 4094.2AM 4094.2N 4094.2R 4094.2V 4094.3N 4094.4N 4094.5BP 4094.5N 409402

PAGE

149,203 149,203 49,147,205 49,147,205 49,147,205 49,147,205 49,147,205 49,147,205 48,146,204 48,146,204 48,146,204 48,146,204 49,147,205 49,147,205 49,147,205 49,147,205 49,147,205 48,146,204 48,146,204 48,146,204 48,146,204 29,207 29,207 29,207 29,207 29,207 29,207 49,147,205 49,147,205 49,147,205 49,147,205 149,203 149,203 149,203 149,203 149,203 143 143 144 144 144 144 145 145 144 145 145 145 153 153 153 153 153 262 51 51 51 51 51 54 54 54 54 54 52 52 53 51 154

CODE

409426 4095.1BP 4095.1N 4095.1NP 4095.2N 4095.4N 4095.5N 4095.6N 4095.7N 4095.9N 409500 409501 409502 409502G 409511 409526 409526.1 409526.O 409526G 409552 4096.2N 4096.3N 409602 409602E 409700 409701 409702 409703 409711 409726 409726.G 409746.S 409752 409756 409756.B 409802 409826 409852 409902 409920 409920R 409922 409923 410045 410046 410050 410056 414141 414143 414147 415141 415143 415147 418003 419802 419826 429900 429900SP 429901 429910 429920 429926 429926.10 429927 429927.10 429946 430100 430130 439905

PAGE

154 53 52 52 52 52 54 52 52 51 262 157 157 157 160 157 157 157 157 157 52 52 153 153 158 159 159 159 160 159 159 159 158 158 158 154 154 154 160 32,132 32,132 34,136 34,136 169 169 169 169 93 93 93 93 93 93 63 155 155 35,135 35,135 35,135 33,133 33,133 35,135 35,135 35,135 35,135 33,133 168 168 137

CODE

439910 440130 440131 440132 440133 440134 440139 440141 440142 440142.0 440143 440144 440146 440147 440149 440150 440151 440154 440155 440156 441140 441141 441142 441142.0 441142.1 441142.2 441143 441145 441147 441242.2 44125 44140 44141 44143 44145 44147 44150 44151 44153 44155 44157 44240 44241 44245 44250 44251 44253 44255 44257 44260000 44270000 44280000 44300000 44310000 44330000 44350 44351 44353 44355 44357 444142 444150 44420000 444242 44430000 44440000 44450000 44460000 444602801

PAGE

137 88 88 88 88 88 88 89 117 117 89 89 89 89 89 117 117 117 117 117 91 91 252 252 252 252 91 91 91 252 93 91 91 91 91 91 92 92 92 92 92 89 89 89 92 92 92 92 92 295 295 295 251,278 251,278 251,278 92 92 92 92 92 117 117 293 117 293 293 293 293 168

CODE

444602901 444602903 444603202 444603204 444603300 444603402 444608 444609 444610 444611 444612 444613 444614 44470000 445140 445141 445143 445145 445147 451240 451241 451243 451245 451247 454110 454111 454113 454117 454118 454140 454141 454143 454147 454148 470000 470001 470002 470003 470005 470006 470007 481000 482000 490050 490100 490250 490400 490900 491000 492000 493000 495000 53020 53125 53250 53500 554110 554111 554113 554117 554140 554141 554143 554147 554148 555140 555141 555143 555147

PAGE

168 168 168 168 168 168 292 292 292 292 292 292 292 293 91 91 91 91 91 91 91 91 91 91 90 90 90 90 90 90 90 90 90 90 291 291 291 291 291 291 291 260 260 263 263 263 263 263 262 262 262 262 296 296 296 296 90 90 90 90 90 90 90 90 90 92 92 92 92

317


318

INDEX BY CODE CODE

555148 555150 555151 555153 555157 555158 555250 555251 555253 555257 555258 600300 600400 600602 601006 601102 601103 601203 601402 601403 601412 601413 601603 601612 601613 601702 601802 601803 601810 602002 602003 611603 611604 617000 617100 617145 617200 617300 617402 620200 620300 620400 620800 621101 621102 621610 621611 621613 701 702 705000 705010 707094 712 713100 716100 716125 716150 720150 7301 7311 7401 7411 7600 800000 801000 801075 801175T 801275

PAGE

92 92 92 92 92 92 92 92 92 92 92 68 68 69 73,74,75 72 72 72 72 72 72 72 71 71 71 71 70 70 70 70 70 71 71 140 140 140 140 140 138 76 76 76 76 76 76 76 76 76 199 199 78 78 68 199 140 140 140 140 140 79 79 79 79 79 78 78 139 139 139

CODE

802000 805000 805001 805010 805011 805013 805030 805040 805050 805120 805130 805140 805150 806030 808000 808001 808100 808101 808200 813100 816100 816150 816160 818150 820150 820200 831-312 831-312B 900000 900005.1 900007 900008 900010 900010.1 900011 900011.1 900012 900012.1 900015 900015.1 900019 900020 900022 900023 900024 900025 900026 900028 900030 900031 900032 900032.1 900033 900034 900036 900037 900038 900041 900042 900043 900050 900073 900074 900076 900078 900093 900095 900098 900100

PAGE

78 101 101 101 101 79,101 101 101 101 101 101 101 101 101 79,101 79,101 79,101 79,101 79,101 139 139 139 139 139 139 139 187 187 274 83 142 83 28 28 28 28 28 28 28 28 82 83 82 82 82 106 82 106 37,196 37,196 37,196 198 37,196 37,196 37,197 37,197 37,196 37,197 37,197 37,197 198 119,137 119,137 119,137 119,137 57 57 57 83

CODE

900101 900110 900111 900111B 900112 900113B 900117 900118 900122 900123 900130 900131 900133 900134 900136 900137 900144 900146 900147 900170 900195 900196 900197 900204 900205 900208 900211 900212 900220 900225 900300 900305 900306 900309 900320 900330 900384 900400 900600 901016 901030 901031 901031.2 901041 901075 901275 901407 901410 901531 901533 901538 901600 910000 910022 910023 910026 911000 911026 912000 913000 913100 916100 916150 917000 918000 918150 922000 928000 979930

PAGE

83 58 58 59 59 59 142 142 58 57 37,196 37,196 37,196 37,197 37,197 37,197 37,197 37,197 37,197 61 61 61 61 141 141 141 141 141 141 141 60 60 61 61 60 60 54 283 283 248 248 248 248 248 139 139 226 226 243 243 243 100 253 82 83 83 253 82 254 254 139 139 139 141 141 139 141 141 106

CODE

989910 989920 989945 989956 A100010 A100011 A100013 A100014 A100018 A100019 A-200 A-201 A20100 A-202 A20250 A20500 A-210 A-211 A-212 A-222 A-230 A-231 A-240 A-241 A-242 A-250 A-251 A-260 B-200 B-210 B-220 B-240 C-200 C-211 C-254 C-256 C-45 CP-24 CP-30 H CP-30 CP-45 H CP-50 D100001 D100002 D100003 D100004 D101818 D102020 D102222 D102240 D102424 D102432 D102440 D102450 D102460 D-200 D-230 D-240 D-250 DS 11 DS 12 DS 35 DS 40 DS 42 DS 61 DS 62 F-200 F-210 F-211

PAGE

105 105 105 105 98 98 98 98 98 98 232 232 100 232 100 100 232 232 232 232 232 232 232 232 232 232 232 232 232 232 232 232 233 233 233 233 104,239 104,239 104,239 104,239 104,239 104,239 99 99 99 99 99 99 99 99 99 99 99 99 99 141,233 141,233 141,233 141,233 95 95 95 94 94,109 95 95 232 232 232


INDEX BY CODE CODE

F-240 G-050 G-100 GS-01 GS-02 H-200 H-210 H-215 H-220 H-240 H-260 H-261 H-285 H-290 H-295 H-401 H-600 H-601 H-610 H-611 H-615 H-616 I-240 I-250 L-240 L-250 M 100150 M 100150B M 110110 M 120180 M 120180B M 150220 M 160220B M 180250 M 180250B M 200300 M 200300B M 250330 M 300400 M 5555 M 5555B M 6080 M 6080B M 70100 M 70110B M 80120 M 80120B M 80160 M-010.1 M-010.2 M-010.5 M-010.6 M-010.7 M-011.1 M-012.1 M-014.1 M-014.2 M-019AM M-019R M-019V M-020AM M-020N M-020R M-020V M-021AM M-021R M-021V M-022 M-024

PAGE

232 218 218 69 69 237 237 237 237 237 236 236 237 237 237 238 26,239 26,239 27 26 28 26 156,235 156,235 235 235 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 215 215 215 215 215 215 216 217 217 220 220 220 210 210 210 210 221 221 221 216 216

CODE

M-026 M-028.5 M-028.6 M-033AM M-033R M-033V M-034AM M-034R M-034V M-035AM M-035R M-035V M-036AM M-036A M-036B M-036P M-040 M-050 M-052 M-053 M-060 M-061AM M-061NA M-062B M-062R M-063B M-063R M-064AM M-064V M-100 M-110 M-200 M-203 M-210 M-300 M-410 M-450 M-500 M-501 M-502 M-503 M-510 M-511 M-512 M-513 M-520 M-521 M-522 M-523 M-530 M-531 M-532 M-533 M-540 M-541 M-542 M-550 M-551 M-552 M-553 M-554 M-560A M-561A M-562L M-563A M-563NA M-563P M-570 M-571

PAGE

216 218 218 209 209 209 209 209 209 209 209 209 208 209 208 208 222 222 215 215 222 208 208 208 208 208 208 208 208 222 222 186 186 186 238 214 214 213 213 213 213 213 213 213 213 223 223 223 223 223 223 223 223 220 220 220 220 220 220 220 221 226 226 226 214 214 214 217 217

CODE

M-572 M-581 M-585 M-600 M-603 M-604 M-606 M-607 M-610 M-640 M-641 M920 N 160230 N-240 N-250 NT-250 R-200 R-215 R-220 R-230 R-240 R-250 R-281 R-282 R-283 R-292 R-293 S-002 S-003 S-004 T-200 T-210 U-0537A U-0537N U-0537NA U-105105A U-105105Y U-1145A U-1145AM U-1145N U-1145NA U-1170A U-1170AM U-1170N U-15128A U-15128AM U-15128N U-4445A U-4445AM U-4445N U-4445NE U-7750A U-7750AM U-7750N U-7750NA U-7780A U-7780N U-7780NA U-7780V U-7796A U-7796V U-8845A U-8845AM U-8845N U-8845V U-8850A U-8850N U-8850NA U-9581AM

PAGE

219 219 219 212 212 212 212 212 212 221 221 100 115 235 235 235 237 237 237 237 237 237 234 234 234 234 234 104,239 104,239 104,239 236 236 212 212 212 229 229 227 227 227 227 227 227 227 229 229 229 213 213 213 213 211 211 211 211 228 228 228 228 228 228 211 211 211 211 211 211 211 210

CODE

U-9581CV U-9581N U-9581NB U-9950CAM U-9950CN U-9950CNA U-9950CR U-9950CV U-9970A U-9970N U-9970R U-9980A U-9980N U-9980NA U-9996A U-9996AM U-9996N V 160230 W-011 W-012 W-013 W-014 W-015 W-016 W-017 W-018 W-100 W-100 W-110 W-120 W-150 Z-025 Z-050 Z-075 Z-100 Z-250 Z-300 Z-500 Z-550 Z-600 Z-700 Z-750 Z-800

PAGE

210 210 210 210 210 210 210 210 227 227 227 228 228 228 229 229 229 115 224 224 224 224 224 224 224 224 197 36,249 36,197,249 36,197,249 249 231 231 231 231 231 231 231 231 231 231 231 231

319


Direction and coordination

Marketing Department, DELTALAB, S.L.U. Photography

DELTALAB, S.L.U. files Christian Ribas Artwork and digital image

Innovagrafic - Pere Mola Graphic concept and cover design

Marketing Department, DELTALAB, S.L.U. Printed by

Vanguard Grafic, S.A. All rights reserved. Both partial or total reproduction of this catalogue without the written permission from DELTALAB, S.L.U, is forbidden Printed in Spain November, 2010


All information presented in this catalogue is correct except in the case of typing errors. We reserve the right to alter the characteristics of products presented in our catalogue when said changes are beyond control of this company.


Plaza de la Verneda, 1 Pol. Ind. La Llana -P.O. BOX 195 08191 RubĂ­, Barcelona, SPAIN Tel. +34 936 995 000 Fax +34 936 994 512 www.deltalab.es eurotubo@deltalab.es

DeltaLab_General_Catalogue_2011  

General Catalogue 2011 UNE-EN ISO 9001 I S O 1 3 4 8 5 QUALITY Medical devices - Quality management systems - Requirements for regulatory pu...