Page 1

bizhub PRESS C8000 CENTRAL REPRODUCTION DEPARTMENTS Efficiency for digital in-house printing


THE INNOVATION THAT CHANGES THE GAME The future of in-house colour print production has begun – with the economic productivity innovation from Konica Minolta, the bizhub PRESS C8000.

As an in-house print provider, you need to innovate continuously. In times of steadily growing demand from internal customers, it is important for you to be able to rely on a system that provides new ways to enhance service offerings while living up to the high pressures of economic print production. Such a system needs to be highly productive and must keep unexpected standstills to a minimum. Also of fundamental importance for you are fastest turnaround times, as these help you to prove the essential value of the in-house production facility to your whole organisation. The handling of a digital printing system must be intuitive – you must find it easy to operate and control, with learning curves as short as possible. Integration of this system into your existing environment should require little effort while the highest possible degree of automation should facilitate and streamline your print workflows.

The demand for colour printing is fast increasing also in inhouse production. And you expect the digital colour device answering this demand to provide high quality output and consistency, as well as convenient tools that enable you to easily maintain the superior output quality. If these are your requirements, don’t hesitate to take a closer look at the bizhub PRESS C8000. You will most likely find that they can do more for you than you ever thought possible!

bizhub PRESS C8000 3

EFFICIENCY PAYS OFF The bizhub PRESS C8000 is the perfect match for efficient digital colour print production. It gives you reasonable performance, convenient operation and outstanding print quality. The bizhub PRESS C8000 comes with various features and benefits, providing impressive proof of the additional value in-house print production means for your whole organisation.

Economic productivity To make your print room more profitable and avoid any discussions about outsourcing, it is crucial for you to meet tightest schedules, enhance your overall productivity, offer new print products and adapt to your company’s changing document workflows. All this you can achieve with the professional features of bizhub PRESS C8000, such as the speed of 80 pages per minute in colour as well as black & white; maximised uptime with the CS Remote Care remote diagnostic system and Customer Maintenance Support program; versatile inline finishing from stapling to perfect binding; highest media flexibility (300 gsm from all trays, 350 gsm from PFU trays) and robust variable data printing capabilities.

Powerful operational ease With the bizhub PRESS C8000, you enjoy maximised ease of use as well as reduced labour and hidden costs – this is thanks to the very easy operation via its large touch screen, as well as intuitive user guidance and tools for the easy and automated adjustment of engine settings. With its variety of controller choices, the bizhub PRESS C8000 integrates almost effortlessly into your existing workflows and guarantees you a high level of print process automation.

Capable quality Produce prints with maximum efficiency, optimising your budget and taking pride in your work. The bizhub PRESS C8000 guaran­tees you this with Simitri® HD+ polymerised toner for the rendition of precise text and lines; automated density control for consistent colour reproduction; and highest registration for accurate duplex printing.

bizhub PRESS C8000 4

bizhub PRESS C8000 TECHNOLOGY The bizhub PRESS C8000 has been equipped with unique digital imaging technologies that guarantee its outstanding and singularly consistent quality. Commercial printers have the benefit of a true differentiator with which they can really exceed their customers’ expectations and increase their business opportunities. The bizhub PRESS C8000 makes it easy to differentiate one’s business with enhanced quality, greater creativity and speed of delivery.


– Screen technology Also thanks to the 1,200 dpi resolution, the bizhub PRESS C8000 provides additional screens for higher quality prints, enabling smoother and more realistic image reproductions that are a perfect match to print data. – ITbit technology The outline processing improves the appearance of characters by thinning them so they do not appear fat. Contour processing helps to reproduce white characters on backgrounds with ideal proportions and reduces jagged edges of half-tone characters.

The bizhub PRESS C8000 features Konica Minolta’s very own, advanced colour processing technology of the second generation. S.E.A.D. stands for „Screen-Enhancing Active Digital Process“ and combines an array of technical innovations to guarantee truly exceptional colour reproduction at top speed. S.E.A.D. II includes these important capabilities:

– Image stability A short interval stability control monitors image consistency on the bizhub PRESS C8000 during continuous printing without affecting performance. Corrections are fully automatic and improve the stability of the image quality, while the whole process considerably enhances production efficiency.

– 1,200 x 1,200 dpi x 8 bit print resolution The impressive print resolution on the bizhub PRESS C8000 reproduces finest characters and thinnest lines to perfection. With 8 bit colour depth and Dot Positioning Control, the bizhub PRESS C8000 achieves a resolution that’s equivalent to 1,200 x 3,600 dpi.

– Density control The gradation correction function meets the varied characteristics of different media by correcting the gradations according to the paper used. Key operators benefit from enhanced efficiency, as they no longer need to go through the time-consuming process of producing test patterns.

bizhub PRESS C8000 5

Extensive media support and productivity Print provider reliably meet their goals with the consistent speed and productivity of the bizhub PRESS C8000 and the matchless media processing capabilities facilitate the production of a wider variety of jobs on more print substrates – altogether a performance that sets a true benchmark. – Equipped with a robust print engine that delivers up to 80 A4 ppm, Konica Minolta’s digital colour press excels with shortest turnaround times whatever job is processed, and handles monthly volumes of max. 500,000 prints with ease. Taking advantage of the fast A3 speed of 46 ppm and printing A4 in two-up production, the A4 speed can even be increased up to 92 ppm. – The bizhub PRESS C8000 is the first colour printer to adopt Konica Minolta’s air suction belt paper feed system for highly accurate feeding of a wider range print substrates and two paper feed units can be connected in a row which gives an impressive paper input capacity of up to 10,760 sheets.

Simitri® HD+ The bizhub PRESS C8000 utilises Konica Minolta’s thirdgeneration Simitri® HD polymerised toner for enhanced image quality and low-temperature fusing even of thick paper. Simitri® HD+ ensures the precise reproduction of dots and narrow lines and with that achieves a natural lustre nearly on par with offset printing.

Skew detection Thanks to a skew detection system that controls the skew amount after the leading edge of the paper has been fed, the bizhub PRESS C8000 produces prints with highest accuracy.

– With comprehensive media processing capabilities and the unique Product Enhancement Module (PEM), which supports the high speed for high paper weights, the bizhub PRESS C8000 is good for the production of an extensive range of print products. Customisable paper profiles and image alignment save time, increase productivity, and ensure highest-quality output. – Paper from 64 to 350 gsm is processed, with all PFU trays handling the maximum paperweight. Duplex printing is possible on up to 300 gsm paper. – The bizhub PRESS C8000 offers automatic curl correction with two paper decurling mechanisms: A standard mechanical decurler reduces paper curl when the paper goes through its zig-zag mechanism. Where required the system performance can be enhanced with a unique optional humidification decurler that elevates the moisture content in the paper and thus eliminates curling. Konica Minolta’s sophisticated media capabilities enable printers to expand their offerings and extend their customer base, maximising profits and ensuring a quick return on investment. The flexibility to produce a wide variety of print products on the broadest range of both coated and uncoated paper qualities enables professional printers to handle more high-revenue jobs.

bizhub PRESS C8000 6

bizhub PRESS C8000 BUSINESS OPPORTUNITIES The production print market is undergoing significant changes today. Accelerated by the recent economic downturn, the number of printing businesses is in decline, total print volume is decreasing and an increasing number of print applications are being transferred to electronic media. Informed printing companies know that they need to grow their print business, increase profit margins and generate new revenues. To support customers in achieving this, Konica Minolta has launched Digital1234; a comprehensive business development program that puts the focus upon the customer’s needs to enable his business. The key question is ‘How can we enable your business today?’ The solution to most business challenges can simply be answered with “by saving you money, increasing your profit, adding new services and making you more productive.” The Digital1234 business building program has been designed for simplicity and encourages businesses to take an opportunity-based approach – to start driving a better business. Using four practical steps the customer is guided and coached on how to identify, assess, justify and implement new business opportunities. The basic concept features these four steps, giving advice through the business process: Why should I invest in this opportunity? How can I fit this into my existing business? Who has experienced it and can tell me about it? What steps should I take to be successful with this new opportunity? Starting with “why”, Digital1234 uses simple opportunity-based papers written by credible industry partners, who explore each business opportunity. The second step focuses upon the “how”, by using simple assessment questions set by a panel of international and independent business experts. The third step, the “who”, describes the story behind the business success while the fourth step provides business resources for download to help customers prosper in their business, such as business focused implementation guides written by industry consultants.


enabling your business

Digital1234 The Digital1234 business development program is designed to encourage print businesses to focus on the opportunities to save money, increase profits, add new services and to improve productivity. Using four practical steps the customer is guided and coached on how to identify, assess, justify and implement new business opportunities.

bizhub PRESS C8000 7

Variable data printing – What is most unique about digital printing? – You can customise every page within one print run and thus create a unique, targeted and relevant message for each recipient. – This is called “Variable Data Printing” (or VDP). – Direct Mail can be more personal: – “Dear Sir or Madam” will become “Dear Paul”. – This is the unique value proposition with digital printing that cannot be achieved with traditional printing. – Studies have shown: the more you zoom in on your readers the more effective your message will be. – On average personalised marketing collateral leads to 31% greater profits compared to general marketing materials. – As a print provider you can charge more for VDP jobs, and your customer gets a better response per piece. – More profit for you – more business for your customer.

Web to print for CRDs – Most CRDs need to continually prove their value to senior management – They need to show they can produce prints more efficiently – “it needs to be on-demand” – “it needs to be for a lower cost” – “it needs to be secure” – A great way to provide value to internal customers is using a web to print solution. – Only 20% of European CRDs have understood the value of web to print. – Web to print is a great opportunity to streamline the job order process. – It makes your operation more cost-effective. – And it makes life so much easier for colleagues to submit print jobs to your CRD, especially for repeating jobs, forms, business cards, catalogues and mailings with automated ordering and delivery. – The costs can be automatically recharged to the appropriate cost centres. – You can automatically enforce and centralise your company brand policy. – You can be open for business 24 hours a day.

bizhub PRESS C8000 8


– Polymerised toner for low temperature fusing and image quality close to offset

Incl. 6 different folding modes, hole punching, multi (GBC) punching, inline booklet finisher with trimmer, perfect binder

OPTIONAL INTERCOOLER CURL ELIMINATOR – Supports decurling of uncoated paper, neutralises static electricity and removes heat

CONVEYOR UNIT – For zig-zag decurling of coated paper; includes colour density sensor for automatic colour adjustment

PRODUCTIVITY ENHANCEMENT MODULE – Supports high speed processing of thick paper and enhances glossiness COLOUR PRESS – – – –

Up to 80 ppm A4 colour or b/w Up to 500,000 pages per month 1,200 x 1,200 dpi x 8 bit Duplex up to 300 gsm

bizhub PRESS C8000 9

TOUCH PANEL – Very easy to use, full-colour touch screen, movable

OPTIONAL HEATING UNIT – To support offset and coated paper DIFFERENT CONTROLLERS – – – –

IC-306 external EFI Fiery controller IC-3600 external EFI Fiery controller IC-307 external CREO colour server IC-601 internal Konica Minolta controller

PAPER TRAYS – Up to 9 paper sources for up to 350 gsm, with air suction belt feeding (only PFU)

S.E.A.D. II –

Screen-Enhancing Active Digital Processing, advanced colour processing technology for high quality output

bizhub PRESS C8000 10


To satisfy the diverse requirements of the most varied professional printing environments, the bizhub PRESS C8000 can be equipped with four different controllers.

bizhub PRESS C8000 11

The IC-306 and IC-3600 Fiery image controllers EFI’s state of the art external Fiery® image controllers bring full functions of Fiery System 9 as well as Fiery Driver 4.0 for both Windows and Mac environments. The feature set of the Fiery controllers include Command WorkStation 5 interface with sophisticated colour management tools, SeeQuence Suite combines impose, compose and preview in one procedure, variable data printing support, hot folders, job batching, and various ways to speed printing by using available paper, printing samples from a different paper tray, removing unused tab paper and more.

The IC-307 Creo colour server The Creo® IC-307 external print controller supports perfect variable data printing integration and is the ideal choice for hybrid prepress workflows. In addition the Creo features advanced spot colour profiling, a complete Pantone GOE library, Remote Site Manager status tracking, JDF connectivity, Creo job ticket software and much more.

The IC-601 Konica Minolta controller The Konica Minolta IC-601 internal print controller brings powerful workflow benefits within reach of more printfor-pay and commercial printing applications – including 1,200 dpi printing at full rated engine speed, high-speed RIP processing, enhanced accuracy in colour reproduction, new colour management functions and full compatibility with bizhub PRESS C8000 on-board job control and editing functions. The IC-601 also supports Konica Minolta’s PageScope® software, for interactive, cost-effective control of documents and individual print devices – as well as the Printgroove POD Suite, combining multiple print management, workflow and job ticketing functions that give you automated control of your entire production floor.

INIMITABLE VERSATILITY FROM START TO FINISH Professional finishing of the printed product is an integral part of any production run – with flexibility as the key for success. A comprehensive range of highly versatile finishing equipment facilitates suitable upgrading of Konica Minolta’s digital production printing presses for varied applications and ensures perfect integration into any production environment.

Paper feed units PF-704 and PF-705 The paper feed units PF-704 and 705 extend the paper capacity by adding three paper trays with capacities of up to 4,630 sheets and increase media flexibility from 64 up to 350 gsm. Added flexibility comes from being able to feed all paper sizes from all trays, complemented by an optional heating unit that can dry paper in the trays to effectively widen the range of media flexibility even further. The PF-705 is equipped with an automatic document feeder that turns bizhub production printing systems into high-performance scanners and copiers.

Combined mixplex/ mixmedia

Mixmedia white/ colour sheets from different trays

Booklet (folding and saddle stiching)

Booklet with Booklet with cover insertion sheet insertion


Multi-letter fold-in

Booklet making unit SD-506 The SD-506 is ideal to create saddle stitched and trimmed booklets with heavy covers, and speeds up inline production of the most diverse print products and in-house materials. The SD-506 produces brochures of up to 200 pages (50 sheets), including automatic image shift and trimming, and has an output capacity for up to 50 booklets. For a professional finish, booklets can be combined with heavy covers printed on up to 200 gsm paper. In addition, the SD-506’s multi-letter fold-in and multi-half-fold functionality for up to 5 sheets accelerates the creation of mailings. For print providers being able to offer print products with such attractive enhancements means an interesting diversification and a boost to sales and profits.


bizhub PRESS C8000 13

Folding & punching unit FD-503 An ideal choice for the production of mailings, flyers, etc., the FD-503 is used to its best advantage in combination with the booklet maker, staple finisher or perfect binder. The folding and punching unit provides six different folding schemes, two- or four-hole punching with 100% productivity, and the post insertion of pre-printed sheets and covers. With the FD-503, compiling even complex, professionally finished documents merely requires a single fully automatic operation, which saves key operators and print providers valuable time that can be used for more important tasks.

Two-hole punching

Four-hole punching


Letter fold-out



Colour cover insertion

Sheet insertion

Multi (GBC) punching unit GP-501 The multi punching unit offers high performance multi-hole (GBC) punching of sheets at full system speed in preparation for offline spiral binding. Various available die sets correspond to the most popular punching schemes, such as metal-based coil (velo) and plastic (comb) binding. Gaining flexibility with the GP-501, print providers find it easy to diversify their portfolio of print products, thus satisfying the varying demands of existing as well as new customers.

Multi punching

Stacking unit LS-505 With the large capacity stacking unit, the Konica Minolta bizhub PRESS series are perfectly equipped for easy integration into environments with existing finishing facilities. Up to 5,000 sheets of offset, i.e. shifted, output can also be stacked in the trolley-mounted stacker; with an integrated paper clamp mechanism, transport is always safe.The trolley much enhances flexibility in the print shop: Being able to wheel the prints directly to an offline finishing or enveloping machine without having to let them dry or cool down saves key operators valuable time which can be better used for more complex tasks.

Trolley stacker

Shifted output

Letter fold-in


bizhub PRESS C8000 14 Perfect binding unit PB-503 This is the finisher for inline production of all kinds of perfect-bound books. The functionality includes Z-fold insertion and insertion of pre-printed colour covers and sheets. Book binding is possible for books with up to 30 mm spine width and includes inline cover trimming. The integrated cover tray has a capacity for up to 1,000 sheets. The PB-503 incorporates a trolley stacker to output perfect bound books and can also be mounted in conjunction with the stapling unit FS-521, offering the combination of perfect binding and stapling in one system. With the PB-503, print providers wanting to surprise their customers with sophisticated bound books that e.g. combine different substrates have found the right solution for such challenging applications. They can offer enhanced flexibility and add attractive variety to their portfolio meeting any customer’s needs and increasing orders, turnover and with that profit.

Perfect binding

Perfect binding with Z-fold

Stacking with trolley for perfect bound books

Perfect Perfect binding with binding with cover insertion sheet insertion

Stapling unit FS-521 Equipped with the FS-521, the bizhub PRO and PRESS series provide multi-position stapling, making this the perfect basic choice for the production of manuals, reports and other extensive documentation. Stapling of up to 100 sheets is performed with 100% productivity, with staples cut to size. Avoiding time-consuming, extra manual finishing work, this attractive feature gives finished document sets a professional touch and ensures their overall excellent quality. Auto-shift sorting and grouping is also available with the FS-521; and the output capacity is for up to 3,000 sheets.

Corner stapling

Two-point stapling

Variable staple Auto-shift length sorting

Corner stapling

Two-point stapling



Letter fold-in

Two-hole punching*

Four-hole punching*

Sheet insertion*

All-in-one finisher FS-612 The compact alternative for environments where space is limited, this multifunctional finisher offers booklet making for up to 20 sheets (80 pages), two folding functions, i.e. centre-fold and letter fold, as well as optional punching and post insertion of printed sheets. A big benefit of this smart, multitalented option is its space saving design. Print providers no longer need to compromise due to lack of space but can produce professional print products to satisfy all their customers’ needs.

* optional Cover insertion*

bizhub PRESS C8000 15

ALL-ROUND AVAILABILITY Professional printers simply need dependable hardware and highly reliable printing technology. Which is why reliability was a top priority in the development of the bizhub production printing systems. Its quality of workmanship and robust metal construction guarantee absolutely sound and secure operation. Various tools and system features enhance the all-round usability further:

Toner and paper refill on the fly Toner and paper refill on the fly largely avoid production interruptions.

Customer Maintenance Support In addition, Konica Minolta’s Customer Maintenance Support (CMS) concept permits the fast and simple exchange of certain system components and working parts by the operator. Print providers welcome being able to solve such minor system problems instantly in-house as this further enhances their flexibility.

Konica Minolta Color Care Konica Minolta Color Care is a professional service offering to ensure that – within the scope of the bizhub PRESS and bizhub PRO colour presses – even highest quality demands of the most discerning customers can be satisfied. With regard to colour quality, Konica Minolta’s Color Care tool defines a product-specific standard and includes the guarantee that every Konica Minolta product under the Color Care concept will achieve and maintain the agreed-upon standard. Konica Minolta Color Care comprises a specified installation process, which is carried out according to a compulsory procedure, and which will control and guarantee a predetermined quality standard.

CS Remote Care Via CS Remote Care, Konica Minolta’s remote service tool for counter readings, system errors and maintenance requirements of the bizhub PRESS and PRO systems can be automatically transmitted to the Konica Minolta service. This enables early analysis of the system status and preventive maintenance if required, before concrete problems occur. It also helps minimise system downtimes and administrative efforts on user side, saving print providers time and money, helping them keep their sanity, and offering them the benefits of virtually allround system availability and maximised productivity.

bizhub PRESS C8000 16 Technical specifications PRINTER SPECIFICATIONS


Print speed A4 Up to 80 ppm Print speed A3 Up to 46 ppm Print resolution 1,200 x 1,200 dpi x 8bit; max.: 1,200 x 3,600 dpi equivalent Gradations 256 gradations

Copy speed A4 Up to 80 cpm Copy speed A3 Up to 46 cpm Gradations 256 gradations FCOT Less than 6.5 sec. (colour A4) Magnification 25–400% in 0.1% steps Multiple copies 1–9,999

SYSTEM SPECIFICATIONS Paper weight 64–300 gsm; up to 350 gsm from all PFU trays Duplex unit Non-stack type; 64–300 gsm Paper sizes A5–A3+ (330 x 487 mm) Maximum image area 321 x 480 mm Paper input capacity Max.: 10,760 sheets; main unit: up to 1,500 sheets Paper output capacity Max.: 13,600 sheets Main unit dimensions 900 x 950 x 1,319 (only main unit) (W x D x H mm) Main unit weight 450 kg (only main unit)

CONTROLLER SPECIFICATIONS IC-306/IC-3600 external EFI Fiery controller CPU Intel® Core2 Quad @ 2.66 GHz (IC-306) 2x Intel® Xeon Quad Core @ 2.8 GHz (IC-3600) RAM 4 GB high-speed memory HDD 160 GB SATA hard drive (IC-306) 2x 500 GB + 250GB HDD (IC-3600) File formats Adobe PostScript Level 1, 2, 3; Adobe PDF 1.4, 1.5, 1.6, 1.7; PDF/X-1a, 3; EPS (option); TIFF (option); TIFF IT (option); JPEG (option); PPML; Creo VPS compatible; Fiery FreeForm v1 / Fiery FreeForm v2.1; Adobe PDF Print Engine IC-307 external Creo controller CPU Intel® Core i7 @ 2.8 GHz RAM 2 GB system memory; 3 GB image memory HDD 2x 500 GB system disc; 2x 500 GB image disc File formats Adobe PostScript 1, 2, 3; Adobe PDF 1.3, 1.4, 1.5, 1.6, 1.7; PDF/X-1a; EPS; TIFF (except for 16 bit tiff); TIFF/IT; JPEG (except for Progressive JPEG and JPEG 2000); CT/LW Creo Variable Print Specification (VPS); PPML IC-601 internal Konica Minolta controller CPU Intel® Core2 Duo @ 2.8 GHz RAM 4 GB high-speed memory HDD 2x 250 GB SATA disc space File formats Adobe PostScript 3; PCL 5c/6; Native PDF; PDF 1.7; PDF/X-1a; X-3; EPS; TIFF, TIFF/IT; JPEG; PPML

SCANNER SPECIFICATIONS* Scan speed A4 Up to 40 opm Scan speed A3 Up to 22 opm Scan resolution 600 x 600 dpi Scan modes TWAIN scan; Scan-to-HDD; Scan-to-FTP; Scan-to-SMB; Scan-to-eMail Scan formats TIFF (single and multi page); PDF

ACCESSORIES Paper feed unit PF-704 3 magazines; air suction feeding; paper capacity: up to 4,630 sheets; paper weight: 64–350 gsm; standard paper sizes: B4–SRA3; min. paper size: 100 x 148 mm; max. paper size: 330 x 487 mm Paper feed unit PF-705 Includes document feeder for up to 100 sheets, 3 magazines; air suction feeding; paper capacity: up to 4,630 sheets; paper weight: 64–350 gsm; standard paper sizes: B4–SRA3; min. paper size: 100 x 148 mm; max. paper size: 330 x 487 mm Folding and punching Pre-printed sheet insertion (2 PI trays for 500 sheets each); unit FD-503 punching (2 and 4 hole); folding (half-fold, Z-fold, gate-fold, letter fold-in, letter fold-out, double-parallel-fold); sub tray for up to 200 sheets Relay unit RU-506 Sheet reverser; adapts processing speed to 80 ppm Multi (GBC) punching Multi punching of A4 sheets; user replaceable die sets for: unit GP-501 velo bind, plastic comb, wire bind, colour coil, pro click; paper weight: 75–216 gsm Booklet making unit Booklet making of up to 50 sheets (200 images); saddle SD-506 stitching, trimming; output tray for up to 50 booklets; multi letter fold-in (up to 5 sheets); multi half-fold (up to 5 sheets) Stacking unit LS-505 Up to 5,000 sheets stacking capacity; two units can be installed as a tandem; up to 10,000 sheets stacking capacity; trolley mounted stacker; auto-shift stacking; sub tray for up to 200 sheets; paper clamp mechanism Perfect binding unit Hot melt glue binding system; integrated 1-side trimming of PB-503 cover sheets; books from A5 up to A4+ (307 x 221 mm); books from 10 sheets up to 30 mm spine width; cover paper tray for up to 1,000 sheets; sub tray for up to 200 sheets; book stacking capacity of up to 3,300 sheets; 2 stacks Stapling unit FS-521 Stapling of up to 100 sheets; 2-point and corner stapling; variable staple length (cutting mechanism); output for up to 3,000 sheets; sub tray for up to 200 sheets; auto-shift sorting and grouping Booklet finisher FS-612 Booklet making for up to 20 sheets (80 images); 2-point and corner stapling; stapling up to 50 sheets; centre fold and letter fold-in; auto-shift sorting and grouping; output for up to 2,500 sheets; sub tray for up to 100 sheets Post inserter PI-502 Pre-printed sheet insertion; 2 PI trays for 200 sheets each (Option for FS-612) punch kit PK-512 (option for FS-612); punching (2 and 4 holes selectable) Punch kit PK-513 Punching (4 holes) (Option for FS-612) Productivity enhance- Enhanced productivity, offset-like glossiness ment module EF-101 Humidifier unit HM-101 Humidification decurler

Konica Minolta Business Solutions Europe GmbH Europaallee 17 30855 Langenhagen Germany


–– All specifications refer to A4-size paper of 80 gsm quality. –– The support and availability of the listed specifications and functionalities varies depending on operating systems, applications and network protocols as well as network and system configurations. –– The stated life expectancy of each consumable is based on specific operating conditions such as page coverage for a particular page size (5 % coverage of A4). The actual life of each consumable will vary depending on use and other printing variables including page coverage, page size, media type, continuous or intermittent printing, ambient temperature and humidity. –– Some of the product illustrations contain optional accessories. –– Specifications and accessories are based on the information available at the time of printing and are subject to change without notice. –– Konica Minolta does not warrant that any prices or specifications mentioned will be error-free. –– All brand and product names may be registered trademarks or trademarks of their respective holders and are hereby acknowledged.

* Only with PF-705

Your Konica Minolta Business Solutions Partner: