Issuu on Google+

From R.O.I. Ph: 0505 45125 International Ph: 00 353 505 45125 From R.O.I. Freefax: 1800 200 147 International Fax: 00 353 505 45345

MGA Ltd. Architectural Glass Fittings Catalogue.

Moneygall Glazing Accessories Ltd Church Rd | Moneygall | Birr | Co. Offaly | Ireland

V. 1.01

ARCHITECTURAL GLASS FITTINGS

Pivot Door System

ils Door Ra oor ered D Temp Fittings

Door

Close

www.glassparts.ie

rs


F R EE DEELRISVPELARCY ED

ON ALL ORD E OF OVE R THE VALU T) FOR â‚Ź300 (Exc l. VA WHE R E IN DE LIVE RY ANY IR E LAND. ERIES SATURDAY DELIV ES NOT APPLY TO ST CO AT D PLEASE NOTE: DO GE AR IDE IRELAND CH DELIVERYS OUTS

Ireland:

Delivery Schedule Next Day Delivery On Orders Placed Up To 16:00. Saturday Deliveries Available On Request.

UK:

Standard Delivery 48 Hours On Orders Placed Up To 16:00 Next Day Available By Special Request.

Rest Of Europe:

3 - 7 Days Depending On Destination Delivery Times Are Based On Items In Stock And Available For Immediate Delivery. Full Terms & Conditions Available On Request.

e i . s t r a p s s a w w w. g l nge On

See The Complete Ra


Contents TEMPERED GLASS FITTINGS

3 - 26

DOOR RAILS

27 - 32

G-TECH PIVOT DOOR SYSTEM

100 33 42 1---120 20

G-TECH FRAMELESS DOOR SYSTEM

43 - 54

DOOR HANDLES

55 66 1 -- 20

DOOR CLOSERS

67 76 1 -- 20

LEVER LOCKS & HINGES

77 88 1 -- 20

G-TECH SLIDING DOOR SYSTEM

891--104 20

MANUAL SLIDING DOOR SYSTEM

1051 -- 116 20

SLIDING WALL SYSTEM

1171--122 20

G-TECH PARTITION SYSTEM

1231--128 20

GLASS CANOPY SYSTEMS

1291--142 20

BALUSTRADE CLAMPS

1431--196 20

POINT FIXINGS

1971--224 20

SPIDERS

2251--236 20

RAIL BRACKETS

2371--258 20

PROFILES & SLIDING TRACK

2591--274 20

ARCHITECTURAL TOOLS & ACCESSORIES

2751--290 20

FRAMELESS SHOWER FITTINGS

291 - 320

ARCHITECTURAL CATALOGUE Copyright Š2009 Moneygall Glazing Accessories Ltd Church Rd Moneygall Birr Co. Offaly Ireland Phone: 0505 45125 Intl Phone: 00 353 505 45125 Freefax: 1800 200 147 Intl Fax: 00 353 505 45345 www.glassparts.ie sales@glassparts.ie This publication is copyright protected. All rights reserved. The use of texts and images, even in part, without the express written permission of Moneygall Glazing Accessories Ltd. is a copyright violation and therewith liable to prosecution. All information in this publication was checked with the greatest care. Neither the manufacturer nor Moneygall Glazing Accessories Ltd assume any liability for possible damage occurring in connection with the content of this catalogue. All liabilities for any possible typographical error or mistakes are excluded. We reserve the right to make continuous modifications without notification.


Notes

2.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Tempered Door Fittings


Suitable for 10mm or 12mm Thick Tempered Safety Glass. Fittings for 15mm or 19mm glass use available by special order. K9124 KGT20

KGL50/2K

KGT40 KGT20

KGL50S KGL50S

KGT40 KGT20

GT/GP Series Max door weight: 90kgs Max door width: 1200mm If the door panel is 3m high by 1m, 12mm thick glass is recommended. For door weights up to 120kgs and a width up to 1400mm wide a door rail fitting with a reinforced strap should be used. Please see the door rail section for more details.

KDR100

KGL50S KGL50S

KGTS840

KGT10

KGT10

KGTS840

KGTS840

K9124 KGP20

KGP63

KGP30 KGP20

KDR100

KGP10

KGL34K

KGL34S KGL34S

KGL34S

KGP30 KGP20

KGP10

KGTS840 K9115

KGTS840

Glass Cut Out Detail For MGA Patch Fittings KGT20 & KGT10

All covers for MGA Fittings are manufactured by using high grade SUS 304 stainless steel sheet, precision stamping process and polished meticulously and body using high density aluminium alloy to meet industry standards. 4.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie

KGP63


Top Fitting KGT20

KGT20

KGT20

Code K9118

KGT10

KGT10

SUS 304 Pivot

KGT10 Code

Adjustable top centre

Finish

KGT20PS

POLISHED STAINLESS

KGT20SS

SATIN STAINLESS

Code

KGT20TP

TITANIUM PLATED

K9124

Top insert to fit KGT20 for K9124, K1929 Pivot or 9118 Adjustable top centre

Code

Finish

KGT10PS

POLISHED STAINLESS

KGT10SS

SATIN STAINLESS

KGT10TP

TITANIUM PLATED

Code K9129

Pivot with threaded rod and solid brass wall plug.

Bottom Fitting With Stainless Steel Insert

Code K9115

Optional Stainless Steel Inserts

SUS 304 Floor Pivot Bearing

Code

DT: Fits MGA‘s GTS840 or German Floor Springs (Standard in KGT10 Bottom Fitting

KGTS840

KGTS840 Floor Spring

500,000 Cycle Test Approved

MT: Fits Italian Floor Spring

NT: Fits Japanese Floor Spring

AT: Fits Japanese Floor Spring KT: Fits Korean Floor Spring

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

5.


Top Centre Fitting Code

K9124

Finish

KGT20CPS

POLISHED STAINLESS

KGT20CSS

SATIN STAINLESS

KGT20CTP

TITANIUM PLATED

KGT20C

KGT10C

Bottom Centre Fitting

Code

K9124

KGT30C

KGT20C

KGT20C

KDR100

KGT10C

Finish

KGT10CPS

POLISHED STAINLESS

KGT10CSS

SATIN STAINLESS

KGT10CTP

TITANIUM PLATED

KGT20C Top Centre Fitting

KGT10C Bottom Centre Fitting

6.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Overhead Door Closer KGTS840

Code

KGT30 KGT30K

KGTS850

KGT22

KGTS850 Concealed Overhead Closer

Top Fitting

Code

Finish

KGT22PS

POLISHED STAINLESS

KGT22SS

SATIN STAINLESS

KGT22TP

TITANIUM PLATED

With Square Insert For KGTS850 Closer

Overpanel Fitting

Code

Finish

KGT30PS

POLISHED STAINLESS

KGT30SS

SATIN STAINLESS

KGT30TP

TITANIUM PLATED

• Prepared M8 Tapped hole at side for K9130 threaded rod or K9140 Alum. Fixing Plate. • With Pivot Diameter 15mm

Examples Code K9140PB

Code K9140AL

Overpanel Strike Box • Prepared M8 Tapped Hole at side for K9130 threaded rod or K9140 Alum. fixing plate. • For KGLS50S Corner Lock

Fixing Screw Threaded Rod M8 With Brass Wall Plug Code

Code K9130

Finish

KGT30KPS

POLISHED STAINLESS

KGT30KSS

SATIN STAINLESS

KGT30KTP

TITANIUM PLATED

Code K9140

Aluminium Fixing Plate (Optional For KGT30, KGT30K

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

7.


Corner Transom Fittings

• Easy Installation With a Unique Designed body in Three Pieces, a great deal of time and effort can be saved by seperate installation in side panel and overpanel. • Same construction for KGT40, KGT40K, KGT41, KGT41K and KGT41KS

Corner Transom Fitting • For Overpanel and Sidepanel • With 15mm Diameter Pivot

Code

Finish

KGT40PS

POLISHED STAINLESS

KGT40SS

SATIN STAINLESS

KGT40TP

TITANIUM PLATED

* Two options in the pivot point, distance from the sidepanel from the frame can be either 55mm or 65mm

KGT40

Corner Transom Strike Box • For Overpanel and Sidepanel • For KGL50S Corner Lock On Top

Code

Finish

KGT40KPS

POLISHED STAINLESS

KGT40KSS

SATIN STAINLESS

KGT40KTP

TITANIUM PLATED

KGT40K

8.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Corner Transom Fitting With Fin • For Overpanel and Sidepanel With Fin Fitting Inside. • With 15mm Diameter Pivot To Fit KGT20 • Right & Left Fin Type

KGT41L

Code/Right KGT41RPS

POLISHED STAINLESS

KGT41RSS

SATIN STAINLESS

KGT41RTP

TITANIUM PLATED

KGT41R

Code/Left

Corner Transom Srike Box With Fin • For Overpanel and Sidepanel With Fin Fitting Inside. • For KGL50S Corner Lock On Top • Right & Left Fin Type

KGT41RK

Finish

Finish

KGT41LPS

POLISHED STAINLESS

KGT41LSS

SATIN STAINLESS

KGT41LTP

TITANIUM PLATED

Code/Right

Finish

KGT41KRPS

POLISHED STAINLESS

KGT41KRSS

SATIN STAINLESS

KGT41KRTP

TITANIUM PLATED

Code/Left

Finish

KGT41LK

KGT41KLPS

POLISHED STAINLESS

KGT41KLSS

SATIN STAINLESS

KGT41KLTP

TITANIUM PLATED

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

9.


Corner Transom Strike Box With Stopper • For Overpanel And Sidepanel • For KGL50S Corner Lock On Top • Stopper Reversible To Make Door Swing In Or Out.

KGT40KS

Code

Finish

KGT40KSPS

POLISHED STAINLESS

KGT40KSSS

SATIN STAINLESS

KGT40KSTP

TITANIUM PLATED

Corner Transom Strike Box With Fin & Stopper • For Overpanel And Sidepanel • For KGL50S Corner Lock On Top • Stopper Reversible To Make Door Swing In Or Out.

Code/Left

Finish

KGT40KSLPS

POLISHED STAINLESS

KGT40KSLSS

SATIN STAINLESS

KGT40KSLTP

TITANIUM PLATED

KGT41RKS

10.

Code/Right

Finish

KGT40KSRPS

POLISHED STAINLESS

KGT40KSRSS

SATIN STAINLESS

KGT40KSRTP

TITANIUM PLATED

KGT41LKS

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Corner Lock • Prepared For Europrofile Cylinder • MGA Europrofile Cylinders No. K9125, K9125T, K9126, K9126T

Both Notches Suitable For KGL50S & KGL50N Corner Locks

Code KGL50S Code KGL50N

Code

Finish

Code

Finish

KGL50NPS

POLISHED STAINLESS

KGL50SPS

POLISHED STAINLESS

KGL50NSS

SATIN STAINLESS

KGL50SSS

SATIN STAINLESS

KGL50NTP

TITANIUM PLATED

KGL50STP

TITANIUM PLATED

• For Security And Easy Installation, All Screw Heads Are In One Side Fixing & Kept Inside Door. • No Need To Take Down Door When Changing The Lock • Locks can be used Left Or Right By Simply Loosening Two Screws. • For Security an Inside Hardened Roller Pin Is Installed.

KGL502K

Code K9137S

Lock Receiver

Code K9139P

Floor Socket With Plate, Spring & Dustcover

KGL50S

Code K9139

Floor Socket With Spring & Dustcover

KGL50S

KGL50S

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

11.


Centre Lock KGL50SCL • Prepared For Europrofile Cylinder • MGA Europrofile Cylinder No. K9125, K9125, K9126 & K9126T

Stike Box KGL50K • For KGL50SCL Centre Lock KGL50SCL

Code

KGL50K

Code

Finish

Code

Finish

KGL50SCLPS

POLISHED STAINLESS

KGL50KPS

POLISHED STAINLESS

KGL50SCLSS

SATIN STAINLESS

KGL50KSS

SATIN STAINLESS

KGL50SCLTP

TITANIUM PLATED

KGL50KTP

TITANIUM PLATED

Centre Lock KGL53

Finish

KGL53PS

POLISHED STAINLESS

KGL53SS

SATIN STAINLESS

KGL53TP

TITANIUM PLATED

• Hook Type Lock For Sliding Doors • Prepared For Europrofile Cylinder • MGA Europrofile Cylinder No. K9125, K9125, K9126 & K9126T

Stike Box KGL53K • For KGL53 Centre Lock

KGL53K

12.

Code

Finish

KGL53KPS

POLISHED STAINLESS

KGL53KSS

SATIN STAINLESS

KGL53KTP

TITANIUM PLATED

KGL53

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Double Over Panel Strike Box • To Suit Two KGL50S Corner Locks On Top

Code

Finish

KGL502KPS

POLISHED STAINLESS

KGL502KSS

SATIN STAINLESS

KGL502KTP

TITANIUM PLATED

KGL502K KGL502KS

Double Over Panel Strike Box With Stopper • To Suit Two KGL50S Corner Locks On Top With Stoppers • Stopper Reversible For Single Action, Makes Door Swing In Or Out

Code

Finish

KGL502KSPS

POLISHED STAINLESS

KGL502KSSS

SATIN STAINLESS

KGL502KSTP

TITANIUM PLATED

Double Over Panel Strike Box With Stopper • With Fin Fitting Inside For Back To Back Doors • With Two Pivots 15mm Diameter To Fit KGT20 • Fin Notching Same As KGT41 Code

KGT51

Finish

KGL51PS

POLISHED STAINLESS

KGL51SS

SATIN STAINLESS

KGL51TP

TITANIUM PLATED

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

13.


KGL24 Patch Lock & KGL24K Strike Box

• No Need To Cut Or Notch Glass • Can Be Fitted Anywhere On The Glass Door & Fixed Panel Edge • MGA European Cylinder No.K9125H, K9126H & K9125HT KGL24K KGL24

KGL24K

KGL24

KGL50S

Code

• Locks From Only One Side • Can Be Removed easily by loosening screws • For Right Or Left Side Door • Can easily Be Reversed By Loosening Some Screws

Finish

KGL24PS

Code

POLISHED STAINLESS

Finish

KGL24SS

SATIN STAINLESS

KGL24KPS

POLISHED STAINLESS

KGL24TP

TITANIUM PLATED

KGL24KSS

SATIN STAINLESS

KGL24KTP

TITANIUM PLATED

KGL24K KGL24

KGL24

KGL24K

KGL242 DOUBLE PATCH LOCK & Strike Box • Lockable From Both Sides • No Need For Glass Notching, Drilling or Cutting • Key Or Thumbturn Cylinder is Optional Code

Finish

KGL242PS

POLISHED STAINLESS

KGL242SS

SATIN STAINLESS

KGL242TP

TITANIUM PLATED

Code

Finish

KGL242KPS

POLISHED STAINLESS

KGL242KSS

SATIN STAINLESS

KGL242KTP

TITANIUM PLATED

KGL242K 14.

KGL242

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


KGL35 Patch Lock

Code

• For Vertical Fixing At Centre Or Horizontal Fixing At Corner • Lock Mechanism Part & Solid Brass Cylinder K9127 Included. • For Security, Inside Hardened Roller Pin Included

Finish

KGL35PS

POLISHED STAINLESS

KGL35SS

SATIN STAINLESS

KGL35TP

TITANIUM PLATED

KGL35K Strike Box • For Use With KGL35Patch Lock At Centre Code K9138

KGL35

KGL35 KGL35

Code

KGL35K

KGL35

Finish

KGL35KPS

POLISHED STAINLESS

KGL35KSS

SATIN STAINLESS

KGL35KTP

TITANIUM PLATED

• For Right & Left Side Door MGA‘a Special Design L Bracked Can Be Reversed & Installed in Lock Mechanism Part and Strike Plate Easily By Using A Screw Driver Only

KGL35

KGL35K

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

15.


KGT63 Glass Clamp

Code

• Used To Join Overpanels & Sidepanels To Reduce Flexing When Pressure Is Applied.

Finish

KGT63PS

POLISHED STAINLESS

KGT63SS

SATIN STAINLESS

KGT63TP

TITANIUM PLATED

KGT73W

KGT63W

KGT63 KGT60 KGT63

KGT63W Side Connector • Used To Hold Fixed Panel Or Support Fin Bracket. • Can Be Used With Fixing Plate Or Fixing Screw, Please Specify When Ordering.

Code

Finish

KGT63WPS

POLISHED STAINLESS

KGT63WSS

SATIN STAINLESS

KGT63WTP

TITANIUM PLATED

Code KGT73W

Code KGT63W

KGT63C Corner Fitting • Used For Joint Overpanel At Corner To Wall

Code

Finish

KGT63CPS

POLISHED STAINLESS

Code

KGT63CSS

SATIN STAINLESS

K9130

KGT63CTP

TITANIUM PLATED

KGT63C

Code

Code

K9141

KGT73W Side Connector

K9142

For Use With KGT63W & KGT63C

For Use With KG73W

• Used To Hold The Fixed Panel Or Support Fin Bracket • Can Be Used With Fixing Plate Or Fixing Screws, Please Specify When Ordering

Code

Finish

KGT73WPS

POLISHED STAINLESS

KGT73WSS

SATIN STAINLESS

KGT73WTP

TITANIUM PLATED

KGT73W KGT63

16.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


KGT60 Corner Transom Connector

Code

Finish

KGT60PS

POLISHED STAINLESS

KGT60SS

SATIN STAINLESS

KGT60TP

TITANIUM PLATED

• For Use With Overpanel & Sidepanel • With Reversible Door Stop Insert For Single Action, Making The Door Swing Or Out. • Removing The Reversible Door Stop Will Allow You To Have A Double Action Door

KGT70 Overpanel Connector (Door Stopper)

KGT63W KGT60

KGT63

Code

• With Two Reversible Stop Inserts For Single Action To Make Door Swing In Or Out

KGT73W

Finish

KGT70PS

POLISHED STAINLESS

KGT70SS

SATIN STAINLESS

KGT70TP

TITANIUM PLATED

KGT70

KGT70

KGT71 Overpanel Connector With Fin Fitting • Special Designed Adjustable Fin Suitable For Glass Thickness 10mm, 12mm & 15mm. • Fix Overpanel With Support Fin To Achieve The Desired Structural Strength • For Supporting Glass Partition Or Glass Curtain Wall With Fin.

Code

Finish

KGT71PS

POLISHED STAINLESS

KGT71SS

SATIN STAINLESS

KGT71TP

TITANIUM PLATED

KGT73W

KGT71

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

17.


KCL42 Glass Clamp

KCL42.1 • Made Weth Heavy Duty SUS 304 Stainless Steel • For Joining Overpanel And Sidepanel To Reduce Flexing When Pressure Is Applied

KCL42

KCL42.1

Code

KCL42.1 Side Connector

Finish

KCL42PS

POLISHED STAINLESS

KCL42SS

SATIN STAINLESS

KCl42TP

TITANIUM PLATED

KCL42.1

• Made Weth Heavy Duty SUS 304 Stainless Steel • For Holding Fixed Panel

Code

KGL52 Turn Knob Lock

Code

Finish

KGL52PS

POLISHED STAINLESS

KGL52SS

SATIN STAINLESS

KGL52TP

TITANIUM PLATED

Finish

KCL42.1PS

POLISHED STAINLESS

KCL42.1SS

SATIN STAINLESS

KCl42.1TP

TITANIUM PLATED

• No Need For A Key, Simply Lock With Thumb From Inside.

Code K9145

KGL52 Lock Receiver

KGL52K Strike Box

Code

POLISHED STAINLESS

KGL52KSS

SATIN STAINLESS

KGL52KTP

TITANIUM PLATED

• Strike Box For Using With A KGL52 Lock. • Receiver Mounted On The Fixed Panel

18.

Finish

KGL52KPS

KGL52K KGL52

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


KGT80 Connector Fitting

Code

Finish

KGT80PS

POLISHED STAINLESS

KGT80SS

SATIN STAINLESS

KGT80TP

TITANIUM PLATED

KGT81 Connector With Fin Fitting

Code

Finish

KGT81PS

POLISHED STAINLESS

KGT81SS

SATIN STAINLESS

KGT81TP

TITANIUM PLATED

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

19.


KGP10 Bottom Fitting • With Stainless Steel Insert Pivot

Code

SUS 304 Floor Pivot Bearing

K9115

Code

Finish

KGP10PS

POLISHED STAINLESS

KGP10SS

SATIN STAINLESS

KGP10TP

TITANIUM PLATED

Code KGTS840

For More Details Please See The Door Closers Section

KGP20 Top Fitting • With Top Insert

Code K9124

SUS 304 Pivot

Adjustable Top Centre Code

Finish

KGP20PS

POLISHED STAINLESS

KGP20SS

SATIN STAINLESS

KGP20TP

TITANIUM PLATED

Code Code K9129

20.

Pivot With Threaded Rod & Solid Brass Wall Plug.

K9118

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


KGP30 Overpanel Fitting • With 15mm Diameter Pivot To Fit KGP20

Glass Cut Out

Code

Finish

KGP30PS

POLISHED STAINLESS

KGP30SS

SATIN STAINLESS

KGP30TP

TITANIUM PLATED

KGL34S Patch Lock

Code

• For Vertical Fixing At Corner Or Horizontal Fixing At Centre. • Hardened Oval Bolt, Double Throw Bold Projection, 20mm. • Prepared For Europrofile Cylinder No. K9125, K9125T, K9126 & K9126T

Finish

KGL34SPS

POLISHED STAINLESS

KGL34SSS

SATIN STAINLESS

KGL34STP

TITANIUM PLATED

KGL34K KGL34S

KGL34S

Code K9139

Code K9135

Code

SUS 304 Keeper Plate

K9137S

Keeper Cup

Code K9139P

Code K9135B

Floor Socket With Spring & Dust Cover

Brass Keeper Plate

Floor Socket With Plate, Spring & Dust Cover

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

21.


KGL34K Strike Box • For Use With KGL34S Patch Lock In Over Panel Or Sidepanel

KGL34K KGL34S

KGL34S

KGL34K

KGL34S

KGL34K KGL34S

KGL34S

Code KGL34KPS

POLISHED STAINLESS

KGL34KSS

SATIN STAINLESS

KGL34KTP

TITANIUM PLATED

KGL34S

K9146C Top Pivot

K9146F Top Pivot

• For Fixing To 50mm Diameter Tube For Use With KGT20

• For Fixing To Flat Surface For Use With KGT20

Code

22.

Finish

KGL34K

Finish

Code

Finish

K9146CPS

POLISHED STAINLESS

K9146FPS

POLISHED STAINLESS

K9146CSS

SATIN STAINLESS

K9146FSS

SATIN STAINLESS

K9146CTP

TITANIUM PLATED

K9146FTP

TITANIUM PLATED

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Code K9127TPC

Code K9127TPB

Code

K9125 & K9127 Key

K9127SC

K9126 Key

Code Code

K9115

Code

Code

K9126PC

K9125PB

K9128LPC

K9118

K9125TPC

K9125PC

Code K9125TPC

K9128LPB

K9129

K9138

K9139P

K9135BPB K9124TP

K9139

K9135HL

K9139PB

K9137

K9124HL K9137S

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

23.


Clear PVC Seals (Weather Strips) The Advantage Of The Weather Strips is Its Ability To Limit The Circulation Of Air Between Indoors & Outdoors. As Such The Temperature Of The Air-Conditioned Building Is Maintained. Dirt & Dust Is Also Prevented From Entering The Room Or Building. „U“ Jamb

Glass Thickness

Weather Strip Height (L)

KPU1006

10mm

6mm

KPU1008

10mm

8mm

KPU1010

10mm

10mm

Code

KPU1206

12mm

6mm

KPU1208

12mm

8mm

KPU1210

12mm

10mm

Glass Thickness

Weather Strip Height (L)

KPF1010

10mm

10mm

KPF1013

10mm

13mm

KPF1020

10mm

20mm

KPF1210

12mm

10mm

KPF1213

12mm

13mm

KPF1220

12mm

20mm

„F“ Jamb

Code

24.

F Jamb

U Jamb

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Wall Profile System

KWP10 For 10mm Glass KWP12 For 12mm Glass

Code

Available In Anodised Aluminium Or Satin Stainless Steel

Finish

Glass Thickness

KWP10AL

ANODISED ALUMINIUM

10mm

KWP10SS

SATIN STAINLESS STEEL

10mm

KWP12AL

ANODISED ALUMINIUM

12mm

KWP12SS

SATIN STAINLESS STEEL

12mm

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

25.


Notes

26.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Door Rails


Code KDR101

STANDARD DOOR RAIL AVAILABLE IN THREE FINISHES

Code KDR102

DOOR RAIL AVAILABLE IN FOUR FINISHES WITH BRUSH SEALS

AL - ANODIZED SATIN ALUMINIUM. PS - ALUM. W/STAINLESS STEEL COVER IN MIRROR POLISH. SS - ALUM. W/STAINLESS STEEL COVER IN SATIN POLISH.

28.

Code

Finish

Length

KDR101AL1

ALUMINIUM

1.2MTRS

KDR101AL3

ALUMINIUM

3MTRS

KDR102AL1

ALUMINIUM

1.2MTRS

KDR102AL3

ALUMINIUM

3MTRS

KDR101SS1

SATIN STAINLESS

1.2MTRS

KDR101SS3

SATIN STAINLESS

3MTRS

KDR102SS1

SATIN STAINLESS

1.2MTRS

KDR102SS3

SATIN STAINLESS

3MTRS

KDR101PS1

POLISHED STAINLESS

1.2MTRS

KDR101PS3

POLISHED STAINLESS

3MTRS

KDR102PS1

POLISHED STAINLESS

1.2MTRS

KDR102PS3

POLISHED STAINLESS

3MTRS

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Code K9139

Code K9137S Code KDRL5128

Code K9138

Code KDRL5025

Code KDR850T

Code K9116

Adjustable Top Centre With 12.5mm Pin

Code

Code

K9117

KMS100

Adjustable Lower Part

Top Arm • To Fit With 9116 ADJ. Top Centre And 9117 ADJ. Lower Part For Swing Door. • To Fit With Sliding Roller For Sliding Door.

Code K9123

Code KML100

For Use With KGTS840 Floor Spring Or 9115 SUS 304 Floor Pivot.

For Use With 9123 Door Strap For Swing Door

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

29.


Code

Code

KIC1020

KIC1220

Code

Code

KIC1040

30.

KIC1240

Code

Code

KIC1030

KIC1230

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

31.


Notes

32.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Pivot Door System


G-Tech Pivot Door System A modern high quality system manufactured using SUS 304 Stainless Steel. Ideal For Offices, Shops, Homes etc..

KPVT20

KPVT10 KGTS840

Code

Code

KPVT20C

KPVT20F

KPVT20 With K9124 Pivot

KPVT10 With Floor Spring Code

Code

KPVT10C

KPVT10F

KPVT20 With K9129 Pivot

KPVT10 With K9115 Floor Pivot

DT: Fits KGTS840 Floor Spring, K9115 Floor Pivot Bearing Or Most German Floor Springs MT: Fits Italian Floor Springs

34.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Code

Code

KPVT30C

KPVT30F

KPVT30

KPVT30

KPVT20

KPVT20

KPVT10

KPVT10

KGTS840

KGTS840

Code

Code

KPVT43C

KPVT43F

• For Holden Overpanel To Wall • Glass Hole Notch Same As KPVT30

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

35.


Left & Right Changeable Code KPVT40C

Code KPVT40F

KPVT40 KPVT20

KPVT10 KGTS840

36.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Left & Right Changeable

KPVT60

Code

Code

KPVT60C

KPVT60F

KPVT60

KPVT60

KPVT20

KPVT10

KPVT10

KGTS840

KGTS840

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

37.


Code

Code

KPVTH20F

KPVTH20C

Code

Code

KPVTH10F

KPVTH10C

• Connecting Rod Must Be Ordered Seperately • Connecting Rod Calculated As Follows CR = Full Height Of Glass Door Panel Less 570mm (285mm + 285mm) • Glass Hole Notch Same As KPVT10 & KPVT20.

Code KPVTR25

38.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Code

Code

KPVTS50C

KPVTS50F

Code KPVTS50

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

39.


40.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Code KH16

KH16A

Overall Length (L) 800mm

Hole Distance (L1) 425mm

KH16B

1000mm

600mm

KH16C

1200mm

800mm

KH16D

1500mm

KH16E

1900mm

Code

Code

Code

KH20

KH22

KH22A

Overall Length (L) 800mm

Hole Distance (L1) 425mm

KH22B

1000mm

600mm

KH22C

1200mm

800mm

1020mm

KH22D

1500mm

1020mm

1200mm

KH22E

1900mm

800 x 800 mm

Code KH20

Overall Length (L) 800mm

Hole Distance (L1) 450mm

Code

All Handles Are Manufactured By Using High Grade SUS 304 Stainless Steel Tube And Polished Meticulously. Available Finishes: PS: Polished Stainless Steel SS: Satin Stainless Steel TP: Titanium Plated (PVD Coated As Gold Colour) When Ordering Please Use The Handle Code With Desired Finished Placed After It. i.e. KH16BSS For The Full Range Of Handles Please See The Handles Section.

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

41.


Accessories For Full Details On The Items Shown Please See The Tempered Glass Fittings & Door Closers Section.

Code K9129 Code

Code

KGL34S

K9124

Code K9139

Code K9137S

Code

Code

K9125

K9125T

Code K9125 Code K9126

Code

Code

K9115

KGTS840

Code KGTS840

42.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

43.


KGX512 Series • This series are non-spring hinges and are made of SUS 304 stainless steel. • Suggested

for use with magnetic seals to catch and stop the door panel in the desired location.

• Prepared

for 8mm, 10mm and 12mm glass thickness

• Maximum

door weight is 45 KGS per pair.

• Three

hinges are recommended for door weight over 45 KGS

• Maximum • Satin

door width is 1000mm

Stainless Steel Finish

KGX62 Series • Connector for fixed panels KGX62MH Series • This series are door stops with concealed magnetic inside to catch the door panel.

44.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Code KGX512.1

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

45.


Code KGX512.1

Code KGX512.2

46.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Code KGX512.3

Code KGX512.4

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

47.


Code KGX62.1

Code KGX62.2

48.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Code KGX62.4

Code KGX62.5

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

49.


Code KGX62.1MH

Code KGX62.2MH

50.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Code KGX62.3MH

Code KGX62.4MH

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

51.


Code JTH-01

Code KDS01

52.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Code

Code

JH26S

JH26SK

Code

Code

JIDL52

JIDL52K

For all the information you need on Pull Handles, Towel Bars, Reinforcement Bars, Knobs, Clear PVC Seals and Wipes and Magnetic Profiles, Please refer to the Frameless Shower Screen Section Of The Catalogue.

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

53.


Notes

54.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


MGA Door Handles Are Manufactured Using Heavy Wall High Grade SUS 304 Stainless Steel Tubing, Precision Bending, Cutting & Welding Process And Polished Meticulously To Meet & Exceed Industry Standards. Available In Three Finishes: Please indicate which finish you require by placing PS, SS or TP After the Handle Code i.e. KH16BSS

KH01

56.

KH02

Code

L1 (C/C)

Diameter

Code

L1 (C/C)

Diameter

KH01A

305mm

25mm

KH02A

200mm

25mm

KH01B

425mm

25mm

KH02B

200mm

32mm

KH01C

305mm

32mm

KH01D

350mm

32mm

KH01E

450mm

32mm

KH01F

600mm

32mm

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


KH03

KH04

L1 (C/C)

Diameter

Code

KH03A

305mm

25mm

KH03B

305mm

32mm

Code

KH03C KH03D

350mm 450mm

L1 (C/C)

Diameter

KH04A

200mm

25mm

KH04B

200mm

32mm

32mm

KH04C

250mm

32mm

32mm

KH04D

305mm

25mm

KH04E

305mm

32mm

KH04F

350mm

32mm

KH05

KH06

= 570mm

Code KH06

Code

L1 (C/C)

Diameter

KH05A

305mm

25mm

KH05B

450mm

32mm

KH05C

600mm

32mm

L1 (C/C)

Diameter

500mm

32mm

Please indicate which finish you require by placing PS, SS or TP After the Handle Code i.e. KH16BSS

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

57.


KH07

KH08

Code

L1 (C/C)

Diameter

Code

L1 (C/C)

Diameter

Code

L1 (C/C)

Diameter

KH07AA

305mm

25mm

KH07BA

305mm

25mm

KH08A

305mm

25mm

KH07AB

450mm

32mm

KH07BB

450mm

32mm

KH08B

450mm

32mm

KH10

KH09

Code

L

L1 (C/C)

Diameter

KH09A

380mm

305mm

25mm

KH09B

560mm

450mm

32mm

Code

L1 (C/C)

Diameter

KH10A

305mm

25mm

KH10B

305mm

32mm

KH10C

350mm

32mm

Please indicate which finish you require by placing PS, SS or TP After the Handle Code i.e. KH16BSS 58.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


KH11

Code

KH12

L

L1 (C/C)

Diameter

Code

L1

L2

Diameter

KH11A

510mm

305mm

25mm

KH12A

275mm

425mm

25mm

KH11B

670mm

450mm

32mm

KH12B

305mm

600mm

25mm

KH12C

305mm

600mm

32mm

L1 (C/C)

W

Diameter

600mm

285mm

32mm

Please indicate which finish you require by placing PS, SS or TP After the Handle Code i.e. KH16BSS

KH13

Code KH13

KH14

L1 (C/C)

W

Diameter

500mm

250mm

32mm

Code KH14

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

59.


KH15

Code

KH19

Code

KH19

D

KH15A

38mm

KH15B

50mm

KH17

Code KH17

KH18

L1 (C/C)

Diameter

425mm

27mm

Code KH18

L1 (C/C)

Diameter

350mm

34mm

Please indicate which finish you require by placing PS, SS or TP After the Handle Code i.e. KH16BSS 60.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


KH16

KH20

Code

Code

L

L

L1 (C/C)

Diameter

KH20A

800mm

450mm

32mm

KH20B

1500mm

800mm

32mm

L1 (C/C)

KH16A

800mm

425mm

KH16B

1000mm

600mm

KH16C

1200mm

800mm

KH16D

1500mm

1020mm

KH16E

1900mm

1200mm

Please indicate which finish you require by placing PS, SS or TP After the Handle Code i.e. KH16BSS

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

61.


KH21A Code KH21A

L

L1 (C/C)

Diameter

800mm

600mm

32mm

L

L1 (C/C)

Diameter

800mm

600mm

32mm

L

L1 (C/C)

Diameter

800mm

600mm

32mm

KH21B Code KH21B

KH21C Code KH21C

Please indicate which finish you require by placing PS, SS or TP After the Handle Code i.e. KH16BSS

62.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


KH22 Code

L

L1 (C/C)

Diameter

KH22A

800mm

425mm

32mm

KH22B

1000mm

600mm

32mm

KH22C

1200mm

800mm

32mm

KH22D

1500mm

1020mm

32mm

KH22E

1900mm 800 x 800mm

32mm

KH23 Code KH23

L

L1 (C/C)

1000mm

600mm

Please indicate which finish you require by placing PS, SS or TP After the Handle Code i.e. KH16BSS

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

63.


KH24A Code

L1 (C/C)

Diameter

KH24A

600mm

32mm

Code

L1 (C/C)

Diameter

KH24B

600mm

32mm

KH24B

Please indicate which finish you require by placing PS, SS or TP After the Handle Code i.e. KH16BSS

KH24C

64.

Code

L1 (C/C)

Diameter

KH24C

600mm

32mm

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


All MGA Pull & Towel Bar Sets Are Constructed Of Heavy Wall SUS 304 Stainless Steel Tubing, Diameter 19mm. Made To Fit Glass Thickness From 6 - 12mm Available in Finishes: PS: Polished Stainless Steel SS: Satin Stainless Steel TP: Titanium Plated (Gold)

JH01

L1 (C/C)

Diameter

JH01A

Code

150mm

19mm

JH01B

200mm

19mm

JH01C

250mm

19mm

JH01D

305mm

19mm

JH01E

450mm

19mm

Code

L1 (C/C)

Diameter

JH01SA

305mm

19mm

JH01SB

450mm

19mm

JH01SC

600mm

19mm

JH01S

JH12

Code

L1 (C/C)

L2 (C/C)

Diameter

305mm

150mm

19mm

JH12B

450mm

200mm

19mm

JH12C

600mm

250mm

19mm

JH12A

JH25SK

JH25

Code

L

L1 (C/C)

JH25SK

500mm

450mm

Code JH25

L

L1 (C/C)

500mm

450mm

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

65.


Notes

66.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Door Closers


68.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Code KGTS840

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

69.


Code K9116/7

Code K9123

Door Strap

Code K9123L

Door Strap

Code K9118/9

Code K9123XL

Code K9143TCL

Door Strap

Code

Offset Top Centre Left

K9143TCR

Offset Top Centre Left

Code

Offset Door Strap Left

K9143DSL

70.

Offset Door Strap Right

Code K9143TCR

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Code Code

K9116/7

K9123 Code K9123L Code

Code

K9118/9

K9123XL

Code

Code

K9143DSR

K9143DSL

Code

Code

K9143TCR

K9143TCL

For A Full Range Of Fittings For Frameless Tempered Glass Doors, Please See The Tempered Glass Fittings Section. KGP Series

KGT Series

Pivoting Door System Door Rail System

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

71.


Height Adjustment In The MGA Standard Cement Case (H:40mm) Is 4mm Deep Cement Case (H:45mm) Is Available By Order For More Adjustment In Height (9mm)

72.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

73.


Technical Data 1 2 3 4 Closing force in Nm, approx. 15 20 25 33 Code No.

Functions: HO & NHO Code No.: 60: 90 Hold open & 130 Back stop(standard) 70: 105 Hold open & 130 Back stop(optional) 62: Non-Hold open & 130 Back stop(optional)

1 105

1 First adjusting closing range 130-20

90

2

2 Second adjusting latching range from approx 20-0

2

20

20

3 Hold open at 90 (standard)

90

4 Hold open at 105 (optional)

5

130

Two closing speed variable by valve adjustment provide full hydraulic control Valvel: 130-20 closing speed. Valve2: 20-0 latching range.

4

105

Closing ranges

3

130

1

5 Back stop at 130 (standard) 3

4

5

6 NHO: Non hold open (optional)

Interchangeable with most famous brands of concealed overhead door closer.

Code KGTS850

330.2(13")

58.7(2-5/16")

11.1(7/16")

95.1(3-3/4")

40.4(1-9/16") 69.9(2-3/4")

16(5/8")

Spindle type: S= 12.2mm(1/2") Standard Length M= 14.8mm(19/32") Medium Length L= 22mm(7/8") Long spindle

74.

Two Adjustment Screw

247.7(9-3/4")

38(1-1/2")

42(1-5/8")

38(1-1/2")

18(23/32")

GTS-850

18.7(3/4")

56.9(2-7/32")

184.5(7-1/4")

50.8(2")

93.5(3-11/16")

63.9(2-1/2")

One for Closing Speed and one for Latching Speed.

Special Retaining Rings Prevent the Adjusting Screws from falling out of the Closer Body, which is the main cause of closer failure.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


255.5(10-1/16")

9.1 (23/64")

10.7(27/64")

69.9 (2-3/4")

12.7 (1/2")

34.1 (1-11/32")

30.2 (1-3/16")

Code KGTS850S

Type „S“ Side Load Arm Assembly For Top Rail With 12.5mm Recess

Code KGTS850SU

Type „U“ Arm Channel For Type „S“ Side Load Arm Fix In The Upper Door Rail Or Timber Door On Top Minimum 17mm Channel Depth And 35mm Width

24(61/64")

13.9(35/64")

11.9(7/16")

34.5(1-23/64")

243(9-9/16")

Code

Type „A“ End Load Arm Assembly For Top Rail With 1“ Deep Recess

3.6 15.9(5/8") (5/32")

KGTS850A

69.9(2-3/4") 28.6(1-1/8")

15.9(5/8")

31.8(1-1/4")

Adjustable Dual-Purpose Bottom Pivot Set

50(1-31/32")

Code KGTS85DP

30.4 (1-3/16") 94.9(3-47/64")

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

75.


Notes

76.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Code KLL20

LEVER LOCK

KLL20 - LEVER LOCK

78.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Code KLL20K

STRIKE BOX

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

79.


KLH30 - LEVER HINGE

Code KLH30

80.

LEVER HINGE

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

81.


KLH32 - LEVER HINGE

Code KLH32

82.

LEVER HINGE

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

83.


KODC730 - OVERHEAD DOOR CLOSER Closer Size: 2-4 Suitable For RH Or LH Doors Closing Speed & Latch Adjustable Spring Strength Fully Adjustable Complete With KFP01 (Fixing Plate) & KSLC01 (Sliding Arm & Channel) Suitable For Wooden Or Metal Door Frames

84.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


KFP01 - FIXING PLATE

KSLC01 - SLIDING ARM & CHANNEL

KODC730B - OVERHEAD DOOR CLOSER (BODY ONLY)

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

85.


KLL20KS - STRIKE BOX

Code

KLL20S - LEVER LOCK

FINISH

Code

FINISH

KLL20KSPS

POLISHED STAINLESS

KLL20SPS

POLISHED STAINLESS

KLL20KSSS

SATIN STAINLESS

KLL20SSS

SATIN STAINLESS

KLL20K - STRIKE BOX

Code

KLL20 - LEVER LOCK

FINISH

Code

FINISH

KLL20KMS

MATT SILVER

KLL20MS

MATT SILVER

KLL20KMB

MATT BRASS

KLL20MB

MATT BRASS

KLH30 - LEVER HINGE Code

FINISH

KLH30MS

MATT SILVER

KLH30MB

MATT BRASS

KLH30S - LEVER HINGE

KLH32 - LEVER HINGE

86.

Code

FINISH

KLH30SPS

POLISHED STAINLESS

KLH30SSS

SATIN STAINLESS

Code

FINISH

KLH32MS

MATT SILVER

KLH32MB

MATT BRASS

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


K9125ST - LOCK CYLINDERS

KLLP401 - STRIKE PLATE

KLLD201 - LEVER HANDLE

Code

FINISH

KLLD201PS

POLISHED STAINLESS

KLLD201SS

SATIN STAINLESS

KLHP407 - FRAME PIVOT

KLLD202 - LEVER HANDLE

Code

FINISH

KLLD202PS

POLISHED STAINLESS

KLLD202SS

SATIN STAINLESS

SUS 304 STAINLESS STEEL HANDLES WITH 8MM SQUARE SPINDLE FOR ALL LEVER LOCKS

KLHP407S - FRAME PIVOT

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

87.


Technical data:

Lever Lock

Catalogue number: Cat. no. KH31PS KH31SS

Glass Edge

KH31TP

Fixed Pane Receiver

Technical data:

Suitable For Glass Thickness 10 12mm. Material: Zinc & Stainless Steel

Catalogue number: Cat. no. KH31RPS KH31RSS

Glass Edge

KH31RTP

Technical data:

Lever Lock

Suitable For Glass Thickness 10 12mm. Material: Zinc & Stainless Steel

Catalogue number: Cat. no. KH32PS KH32SS

Glass Edge

KH32TP

Fixed Pane Receiver

Technical data:

Suitable For Glass Thickness 10 12mm. Material: Zinc & Stainless Steel

Catalogue number: Cat. no. KH32RPS KH32RSS

Glass Edge

KH32RTP

88.

Suitable For Glass Thickness 10 12mm. Material: Zinc & Stainless Steel

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


G-Tech Sliding Door System


90.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Code KGSD435

Code KGSD420B

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

91.


92.

Code

Code

KGSD423F

KGSD423C

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Code KGSD151F

Code

Code

KGSD423F

KGSD423C

Code KGSD151C

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

93.


Code KGSD153

Code KGSD153

Code KGSD151C

Code KGSD151C

94.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Code KGSD151F

Code KGSD151F

Code KGSD420

Code KGSD420

Code KGSD420B Code KGSD420B

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

95.


Code KBG15 Code KBG15S

Code KBG15S

• •

96.

Code

Code

KGSDRECS

KGSDREC

For KGSD025 Sliding Rail Stainless Steel

• •

For KGSD025 Sliding Rail Plastic

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Code KGSD440

Code KGSD440

Code KGSD435

Code KGSD435

Code KGSD025

Code KGSD025

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

97.


Code KH16

KH16A

Overall Length (L) 800mm

Hole Distance (L1) 425mm

KH16B

1000mm

600mm

KH16C

1200mm

800mm

KH16D

1500mm

1020mm

KH16E

1900mm

1200mm

Code

All Handles Are Manufactured By Using High Grade SUS 304 Stainless Steel Tube And Polished Meticulously. Available Finishes: PS: SS: TP: Code

Polished Stainless Steel Satin Stainless Steel Titanium Plated (PVD Coated As Gold Colour)

For The Full Range Of Handles Please See The Handles Section.

KH22

KH22A

Overall Length (L) 800mm

Hole Distance (L1) 425mm

KH22B

1000mm

600mm

KH22C

1200mm

800mm

KH22D

1500mm

1020mm

KH22E

1900mm

800 x 800 mm

Code

98.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Code

Code

KG245C

KG245F

Code KGSD20MH

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

99.


Code KCFH65

Code K9139

100.

Code

Code

Code

Code

KGL53K

KGL53

KGL34S

K9137S

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


MEASUREMENTS & GLASS PREPARATION

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

101.


MEASUREMENTS & GLASS PREPARATION

102.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Code KGSD523

Code KBG16

Code KBG16S Code KBG16A

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

103.


Notes

104.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


• • • • • • • • •

106.

KSDT 120ST SLIDING DOOR TRACK KSDT 120FP SIDE CHANNEL KSDT 120TC TOP COVER KRH65 ROLLER HANGER JP08 BS OR JP10 BS BUBBLE SEAL JP810 SDJ SIDE JAMB K120SH SIDE HOLDER BRACKET KCFH65 CONCEALED FIXING HANDLE KBG15 OR KBG15S BOTTOM GUIDE

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Code KSDT120FP

Code

Code

KSDT120ST

KSDT120TC

Code KSDT120SH

For Holding KSDT 120ST Sliding Door Track On Wall At Both Sides

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

107.


• • • • • • • • •

108.

KSDT 120ST SLIDING DOOR TRACK KSDT 120FP SIDE CHANNEL KRH68 ROLLERHANGER KRH65 ROLLER HANGER KPU10 OR KPU12 U JAMB KPF10 OR KPF12 F JAMB KSDT 120SH SIDE HOLDER BRACKET KCFH65 CONCEALED FIXING HANDLE KBG15 OR KBG15S BOTTOM GUIDE

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

109.


Code KSDT150ST

Code KSDT150ST

110.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Code KRH73W

Code KRH10 Code KRH100

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

111.


112.

Code

Code

Code

KRH65

KRH68

KRH73W

Code

Code

KRH100

KRH10

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Code KSM15

Code KRH68

Code KTM15

Code KACC150

Code KRH73W Code KRH10

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

113.


Code KCFH65

Code

Code

Code

KGL53K

KGL53

KGL34S

Code KESH15

114.

Code

Code

KBG15S

KBG15

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Wall Profile System

KWP10 For 10mm Glass KWP12 For 12mm Glass

Code

Available In Anodised Aluminium Or Satin Stainless Steel

Finish

Glass Thickness

KWP10AL

ANODISED ALUMINIUM

10mm

KWP10SS

SATIN STAINLESS STEEL

10mm

KWP12AL

ANODISED ALUMINIUM

12mm

KWP12SS

SATIN STAINLESS STEEL

12mm

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

115.


Notes

116.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Sliding Wall System


KSWSPF - Sliding Wall System With Door Rails Detail & Parts

Code

Code Code

KSWS80TC

KSWS80ST

KDR102 Code KRHDR102

Code KSWS80EST

END STOPPER

Code KDRL5025A Code KGTS840

Code

Code

Code

Code

K9147

KDFB102ST

KDFB102S

KDFB102S

118.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


KSWSPF - Sliding Wall System With Patch Fittings Detail & Parts

Code Code

KRHDR102

KSWS80TC

Code

Code

KGT20

KGT20

Code KSWS80EST

END STOPPER

Code KGTS840

Code KGT10

Code

Code

Code

KDFB102S

KDFB102ST

Code K9147

KGL50N

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

119.


Sliding Wall System Track & Guide Connectors

Code KSWS80ST

Code KSWS80ST-RL

Code KSWS80ST-RR

Code KSWS80ST-TR

Code KSWS80ST-TL

120.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

121.


Notes

122.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


G-Tech Partition System


Code

Code

KG120F

KG120C

Code

Code

KG150C

KG150F

Code KG150F Code KG1501

124.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Code KG1391

Code

Code

KG139C

KG139F

Code KG1451 Code

Code

KG145C

KG145F

Code

Code

KG145C

KG145F

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

125.


Single Point Fittings

126.

Code

Code

KG1201C

KG1201F

Code

Code

KG3011

KG3013

Code

Code

KG3012

KG3014

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Code

Code

KG102C

KG102F

Code

Code

KG102SC

KG102SF

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

127.


128.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


GLASS CANOPY SYSTEMS


KF101900 Canopy Kit

KF101900S Canopy Kit

130.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


KF101900 Canopy Kit

KF101910 KF101930 KF101950 KF101940

KF101900S Canopy Kit

KF101910S KF101930 KF101950S KF101940 KF1019201

KF101920 CONNECTING ROD KF1019202 KF1019203 KF1019204 KF1019205

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

131.


• • •

132.

KF1019201 KF1019202 KF1019203

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


KF1019203

• •

KF1019204 KF1019205

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

133.


Canopy system, 1700 mm outreach

e - power

* Suitable for heating glass/TVG!

C

B

A

Catalogue number: Cat. no.

Designation

Glass thickness

Material

Surface style

PU

K 17 600 5 65

Canopy set

13,52-21,52 mm

Stainless Steel (VA)

mirrored

1 set***

13,52-21,52 mm

Stainless Steel (VA)

mirrored

1 each

K 17 602 5 65

Tie rod with fork crown

K 17 603 5 65

Wall attachments for tie rod

K 17 604 5 65

Wall connection with fork crown

K 17 606 5 65

Point fixture with eyelet

*** Scope of delivery: 1x tie rod with fork crown (cat. no.: 17 602 5 65), 1x wall attachment for tie rod (cat.-no.: 17 603 5 65), 1 x wall connector with fork crown (cat. no.: 17 604 5 65), 2x point fixtures cat. no.: 17 606 5 65)

134.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Canopy system, 1700 mm outreach

52

120°

A

Ø150

0 R6

A

Ø1

3

1324

19

20

B

120°

101

Ø150

35°

°

0 R6

Ø8

B

Ø1

3

17

C

3300 1950 1350

1350

300

1700

125

300

Hole pattern VSG:

250

Ø40 +0,1 -0

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

135.


Canopy system, 1300 mm outreach

e - power

* Suitable for heating glass/TVG!

A

B

C

Catalogue number: Cat. no.

Designation

Glass thickness

Material

Surface style

PU

K 17 605 5 65

Canopy set

13,52-21,52 mm

Stainless Steel (VA)

mirrored

1 set***

13,52-21,52 mm

Stainless Steel (VA)

mirrored

1 each

K 17 601 5 65

Tie rod with fork crown

K 17 603 5 65

Wall attachments for tie rod

K 17 604 5 65

Wall connection with fork crown

K 17 606 5 65

Point fixture with eyelet

*** Scope of delivery: 1x tie rod with fork crown (Cat. no.:17 601 5 65), 1x wall attachments for tie rod (Cat. no.:17 603 5 65), 1x Wall connection with fork crown (Cat. no.: 17 604 5 65), 2x point fixtures (Cat. no.:17 606 5 65)

136.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Canopy system, 1300 mm outreach

52 120°

A

Ø150

0 R6

A

Ø1

3 55 14

997

,5

B

120°

101

Ø150

35°

°

0 R6

Ø8

Ø1

3

B

17

C

3300 1950 1350

1350

300

1300

125

300

Hole pattern VSG:

250

Ø40 +0,1 -0

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

137.


Window-alteration canopy system, 1700 mm outreach

e - power

* Suitable for heating glass/TVG!

A

C

B

D

Catalogue number: Cat. no.

Designation

Glass thickness

Material

Surface style

PU

K 17 610 5 65

Canopy set

13,52-21,52 mm

Stainless Steel (VA)

mirrored

1 set***

*** Scope of delivery: 4x tie rod with fork crown, 2x wall attachments for tie rod, 3x wall connection with fork crown, 6x point fixtures

138.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Window-alteration canopy system, 1700 mm outreach

52

A

120° Ø150

A 0 R6

Ø1

3

1324

19

20

B

120°

101

Ø150

35°

°

0 R6

Ø8

B

Ø1

3

17

C+D

3300 1350

1350

300

1700

125

300

Hole pattern VSG:

250

Ø40 +0,1 -0

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

139.


Canopy system, 1000 mm outreach

e - power

* Suitable for heating glass/TVG!

A

B

C

Catalogue number: Cat. no.

Designation

Glass thickness

Material

Surface style

PU

K 17 620 5 65

Canopy set

13,52-21,52 mm

Stainless Steel (VA)

mirrored

1 set**

** Scope of delivery: 1x tie rod with fork crown, 1x wall attachments for tie rod, 1x wall connection with fork crown, 2x point fixtures

140.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Canopy system, 1000 mm outreach

A A Ø13 Ø120

Ø90

98

620

8

100

°

35°

B Ø13 Ø90

B 17

C

1950 1350

300

655

95

300

1000

Hole pattern VSG:

250

Ø120

Ø17 +0,5 -0

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

141.


Notes

142.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


BALUSTRADE CLAMPS


Clamp fixtures (ESG) (tempered safety glass) Technical data:

· Clamp fixtures for square tubes · Panel thickness: 8, 10 and 12 mm · can be used on right and left sides 4

24

· incl. rubber inserts, self-locking bolts (VA) and cover caps

55

· Securing pin available as accessory

Ø9

BAUART GEPRÜFT

16

TÜV Rheinland Product Safety

Ø6

TYPE APPROVED

8-12

34

Sicherungsstift

ETB

geprüft !

55

*General construction supervisory approval applied for! Catalogue number:

Zinc die cast

Stainless steel (VA)

4

Panel thickness 8 mm

K 10 001 1

10 mm

K 10 002 1

12 mm

K 10 003 1

8 mm

K 10 001 5

10 mm

K 10 002 5

Fracture load zinc die cast

12 mm

K 10 003 5

Fracture load stainless steel (VA)

Cat. no.

24

Test results (TÜV Rhineland safety standards authority) Panel thickness

vertical surface pressure

horizontal surface pressure

8, 10, 12 mm

1.000 N

3.000 N

34 Securing pin Ø6

16

Test results (according to ETB directives)

8-12

Material

Sicherungsstift

9,20 KN 18,40 KN

· Clamp fixture for circular tubes (48.3 mm)** · Panel thickness: 8, 10 and 12 mm

Technical data: 55 ¯9

· can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA) and cover caps

55

· Securing pin available as accessory

BAUART GEPRÜFT TÜV Rheinland Product Safety

TYPE APPROVED

¯9

55

ETB

geprüft !

55

* General construction supervisory approval applied for! ** Other radii on request!

Zinc die cast

Stainless steel (VA)

K 10 025 1

10 mm

K 10 026 1

12 mm

K 10 027 1

8 mm

K 10 025 5

10 mm

K 10 026 5

Fracture load zinc die cast

12 mm

K 10 027 5

Fracture load stainless steel (VA)

Available Finishes: To select the finish for the particular the particular clamp clamp thatthat your require your require please please selectselect the Cat.Cat. the no for no the for clamp the clamp and thenthen and select select the finish the finish code. Please Please code. note code note16, code 55 & 16 6555 & are are forfor stainless stainless steel steel clamps only.

144.

4

Panel thickness 8 mm

Cat. no.

24

Test results (TÜV Rhineland safety standards authority) Panel thickness

vertical surface pressure

horizontal surface pressure

8, 10, 12 mm

1.000 N

3.000 N

34

R 24

¯6

16

Test results (according to ETB directives) 9,20 KN

24

4

34

Sicherungsstift Securing pin

R 24

18,40 KN ¯6

16

Code

Surface style

Code

Surface style

Sicherungsstift

00

untreated

35

brown powder coated (RAL 8019)

09

matt chrome plated

36

black powder coated (RAL 9005)

21

ground matt chrome plated (stainless-steel effect)

37

white powder coated (RAL 9016)

22

ground polished hard-chrome

63

matt nickel plated, brushed (stainless steel finish)

23

ground polished hard chrome bright gold plated

99

special colour (RAL powder coated)*

33

white powder coated (RAL 9010)

16

polished (Stainless Steel Only)

34

aluminium colour powder coated

55

ground (Stainless Steel Only)

65

mirrored (Stainless Steel Rail Bolt Only)

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie

8-12

Material

8-12

Catalogue number:


Clamp fixtures (ESG) (tempered safety glass) Technical data:

· Clamp fixtures for square tubes · Panel thickness: 6, 8 and 10 mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA) and cover caps

4545 ¯9 ¯9

BAUART GEPRÜFT

5

454

TÜV Rheinland Product Safety

ETB

geprüft !

TYPE APPROVED

*General construction supervisory approval applied for! Catalogue number: Test results (TÜV Rhineland safety standards authority)

6-10 6-10

2828

1616

44

Panel thickness

vertical surface pressure

horizontal surface pressure

6, 8 mm

800 N

3.000 N

10 mm

1.000 N

3.000 N

Material

Panel thickness

Cat. no.

6 mm

K 10 050 1

8 mm

K 10 051 1

10 mm

K 10 052 1

6 mm

K 10 050 5

Zinc die cast

Test results (according to ETB directives) Fracture load zinc die cast

6,38 KN

Fracture load stainless steel (VA)

Technical data: ¯9

8 mm

K 10 051 5

10 mm

K 10 052 5

· Corner clamp fixtures for square tubes with floor as slip guard · Panel thickness: 6, 8, and 10 mm

69 28,5 ¯9 6

12,76 KN

Stainless steel (VA)

· can be used on right or left sides · incl. rubber inserts, self-locking bolts (VA) and cover caps

69

Abrutschsicherung 28,5 BAUART GEPRÜFT

6

TÜV Rheinland Product Safety

Abrutschsicherung

ETB

geprüft !

TYPE APPROVED

*General construction supervisory approval applied for! 4

16

6-10

Test results (TÜV Rhineland safety standards authority) 16

Panel thickness

28

6-10

4

6, 8, 10 mm 28

45

Available Finishes: To select the finish for the45 particular clamp that your require please select the Cat. no for the clamp and then select the finish code. Please note code 16, 55 & 65 are for stainless steel clamps only.

Code

vertical surface pressure

horizontal surface pressure

5.000 N

3.000 N

Material

Installation position

right Zinc die cast

Test results (according to ETB directives) Fracture load zinc die cast

Surface style

left

28,21 KN

Code

Panel thickness

Cat. no.

6 mm

K 10 055 1

8 mm

K 10 056 1

10 mm

K 10 057 1

6 mm

K 10 060 1

8 mm

K 10 061 1

10 mm

K 10 062 1

Surface style

00

untreated

35

brown powder coated (RAL 8019)

09

matt chrome plated

36

black powder coated (RAL 9005)

21

ground matt chrome plated (stainless-steel effect)

37

white powder coated (RAL 9016)

22

ground polished hard-chrome

63

matt nickel plated, brushed (stainless steel finish)

23

ground polished hard chrome bright gold plated

99

special colour (RAL powder coated)*

33

white powder coated (RAL 9010)

16

polished (Stainless Steel Only)

34

aluminium colour powder coated

55

ground (Stainless Steel Only)

65

mirrored (Stainless Steel Rail Bolt Only)

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

145.


Clamp fixtures (ESG) (tempered safety glass) · Clamp fixture for circular tubes (42,4 mm)**

Technical data:

· Panel thickness: 6, 8, and 10 mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA) and cover caps 45

BAUART GEPRÜFT TÜV Rheinland Product Safety

Stainless steel (VA)

geprüft !

45

45 (TÜV Rhineland safety standards authority) Test results

6 mm

K 10 075 1

8 mm

K 10 076 1

10 mm

K 10 077 1

Panel thickness

vertical surface pressure

horizontal surface pressure

6, 8 mm

800 N

3.000 N

10 mm

1.000 N

45

3.000 N

6 mm

K 10 075 5

Test results (according to ETB directives)

8 mm

K 10 076 5

Fracture load zinc die cast

10 mm

K 10 077 5

Fracture load stainless steel (VA)

28

R 21

4 16 6-10

¯9

Cat. no.

6-10

Panel thickness

Zinc die cast

28

ETB

TYPE APPROVED

* General construction supervisory approval applied for! ** Other radii on request!

Catalogue number: Material

¯9

16

4

R 21

6,38 KN

28

12,76 KN

· Corner clamp fixture for circular tubes (42,4 mm)** with floor as slip guard

Technical data:

45

· Panel thickness: 6, 8, and 10 mm · can be used on right or left sides · incl. rubber inserts, self-locking bolts (VA) and cover caps

69

BAUART GEPRÜFT TÜV Rheinland Product Safety

¯9

ETB

28,5

geprüft !

TYPE APPROVED

6

* General construction supervisory approval applied for! ** Other radii on request!

Abrutschsicherung Slip guard

Catalogue number:

right Zinc die cast left

4 16

Panel thickness

Cat. no.

6 mm

K 10 080 1

8 mm

Panel thickness

vertical surface pressure

horizontal surface pressure

6, 8, 10 mm

5.000 N

3.000 N

K 10 081 1

10 mm

K 10 082 1

6 mm

K 10 085 1

8 mm

K 10 086 1

Test results (according to ETB directives)

10 mm

K 10 087 1

Fracture load zinc die cast

Available Finishes: To select the finish for the particular clamp that your require please select the Cat. no for the clamp and then select the finish code. Please note code 16, 55 & 65 are for stainless steel clamps only.

146.

Test results (TÜV Rhineland safety standards authority)

Code

Surface style

6-10

Material

Installation position

R 21

45

28,21 KN

Code

Surface style

00

untreated

35

09

matt chrome plated

36

brown powder coated (RAL 8019) ¯9 black powder coated (RAL 9005)

21

ground matt chrome plated (stainless-steel effect)

37

white powder coated (RAL 9016)

22

ground polished hard-chrome

63

matt nickel 28,5 plated, brushed (stainless steel finish)

23

ground polished hard chrome bright gold plated

99

33

white powder coated (RAL 9010)

16

special colour (RAL powder coated)* 6 polished (Stainless Steel Only)

34

aluminium colour powder coated

55

ground (Stainless Steel Only) Abrutschsicherung

65

mirrored (Stainless Steel Rail Bolt Only)

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie

69

28

R 21


Clamp fixtures (ESG) (tempered safety glass) Technical data:

· Clamp fixtures for square tubes · Panel thickness: 6, 8, 10 and 12mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA) and cover caps · Securing pin available as accessory

45

¯9

BAUART GEPRÜFT TÜV Rheinland Product Safety

ETB

geprüft !

TYPE APPROVED

63

*General construction supervisory approval applied for! 45

6-10

16

4

¯9

28

Catalogue number: Material

66-10 - 12

28

Test results (TÜV Rhineland safety standards authority)

¯ 6 Sicherungsstift Securing pin

Technical data:

Panel thickness

vertical surface pressure 63

horizontal surface pressure

6, 8, 10 mm

1.000 N

3.000 N

Zinc die cast

Test results (according to ETB directives) Fracture load zinc die cast

3,99 KN

Fracture load stainless steel (VA)

7,98 KN

Stainless steel (VA)

Panel thickness

Cat. no.

6 mm

K 10 100 1

8 mm

K 10 101 1

10 mm

K 10 102 1

6 mm

K 10 100 5

8 mm

K 10 101 5

10 mm

K 10 102 5

12mm

K 10 103 5

· Clamp fixture for circular tubes (48.3 mm)** · Panel thickness: 6, 8, 10 and 12 mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA) and cover caps · Securing pin available as accessory

¯9

16

4

28

BAUART GEPRÜFT TÜV Rheinland Product Safety

28

63

ETB

geprüft !

TYPE APPROVED

R 24

* General construction supervisory approval applied for! ** Other radii on request! 16

4

¯ 6 Sicherungsstift

28

Test results (TÜV Rhineland safety standards authority) Panel thickness

vertical surface pressure

horizontal surface pressure

6, 8, 10 mm

1.000 N

3.000 N

R 24

6 -6-10 12

28

¯ 6 Sicherungsstift

Securing pin

Available Finishes: To select the finish for the particular clamp that your require please select the Cat. no for the clamp and then select the finish code. Please note code 16, 55 & 65 are for stainless steel clamps only.

Code

Test results (according to ETB directives) Fracture load zinc die cast

3,99 KN

Fracture load stainless steel (VA)

7,98 KN

Surface style

Code

Catalogue number: 6-10

45

Material

Panel thickness

Zinc die cast

6 mm

K 10 125 1

8 mm

K 10 126 1

Stainless steel (VA)

Cat. no.

10 mm

K 10 127 1

6 mm

K 10 125 5

8 mm

K 10 126 5

10 mm

K 10 127 5

12 mm

K 10 128 5

Surface style

00

untreated

35

brown powder coated (RAL 8019)

09

matt chrome plated

36

black powder coated (RAL 9005)

21

ground matt chrome plated (stainless-steel effect)

37

white powder coated (RAL 9016)

22

ground polished hard-chrome

63

matt nickel plated, brushed (stainless steel finish)

23

ground polished hard chrome bright gold plated

99

special colour (RAL powder coated)*

33

white powder coated (RAL 9010)

16

polished (Stainless Steel Only)

34

aluminium colour powder coated

55

ground (Stainless Steel Only)

65

mirrored (Stainless Steel Rail Bolt Only)

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

147.


Clamp fixtures (ESG) (tempered safety glass) · Clamp fixture for circular tubes (42,4 mm)**

Technical data:

· Panel thickness: 6, 8, 10 and 12 mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA) and cover caps

45

· Securing pin available as accessory 45 BAUART GEPRÜFT TÜV Rheinland Product Safety

¯9

¯9

ETB

geprüft !

TYPE APPROVED

63

* General construction supervisory approval applied for! 63 ** Other radii on request!

Material Zinc die cast

Stainless steel (VA)

16

Panel thickness

Cat. no.

6 mm

K 10 130 1

8 mm

K 10 131 1

4

28

Test results (TÜV Rhineland safety standards authority) Panel thickness

vertical surface pressure

horizontal surface pressure

6, 8, 10 mm

1.000 N

3.000 N

10 mm

K 10 132 1

6 mm

K 10 130 5

8 mm

K 10 131 5

Test results (according to ETB directives)

10 mm

K 10 132 5

Fracture load zinc die cast

3,99 KN

12 mm

K 10 133 5

Fracture load stainless steel (VA)

7,98 KN

· Clamp fixtures for square tubes

28 28

R 21

R 21

¯ 6 Sicherungsstift

¯

6 -6-10 12

Catalogue number:

Securing pin

Technical data:

· Panel thickness: 6 and 8 mm · can be used on right and left sides 40

· incl. rubber inserts, self-locking bolts (VA) and cover caps

¯9

40 ¯9

BAUART GEPRÜFT TÜV Rheinland Product Safety

TYPE APPROVED

ETB

geprüft !

50

*General construction supervisory approval applied for!

Test results (TÜV Rhineland safety standards authority) Panel 24thickness

vertical surface pressure

horizontal surface pressure

6, 8 mm

1.000 N

3.000 N

Material

Panel thickness

Cat. no.

Zinc die cast

6 mm

K 10 150 1

8 mm

K 10 151 1

6 mm

K 10 150 5

Fracture load zinc die cast

4,57 KN

8 mm

K 10 151 5

Fracture load stainless steel (VA)

9,14 KN

24

16

4

6/8

Catalogue number:

Available Finishes: To select the finish for the particular clamp that your require please select the Cat. no for the clamp and then select the finish code. Please note code 16, 55 & 65 are for stainless steel clamps only.

148.

Code

Surface style

6/8

Test results16(according to ETB directives) 4 Stainless steel (VA)

Code

Surface style

00

untreated

35

brown powder coated (RAL 8019)

09

matt chrome plated

36

black powder coated (RAL 9005)

21

ground matt chrome plated (stainless-steel effect)

37

white powder coated (RAL 9016)

22

ground polished hard-chrome

63

matt nickel plated, brushed (stainless steel finish)

23

ground polished hard chrome bright gold plated

99

special colour (RAL powder coated)*

33

white powder coated (RAL 9010)

16

polished (Stainless Steel Only)

34

aluminium colour powder coated

55

ground (Stainless Steel Only)

65

mirrored (Stainless Steel Rail Bolt Only)

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Technical data:

· Clamp fixture for circular tubes (33,7 mm)** · Panel thickness: 6 and 8 mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA) and cover caps

¯9

6/8

40

BAUART GEPRÜFT TÜV Rheinland Product Safety

50

ETB

geprüft !

TYPE APPROVED

* General construction supervisory approval applied for! ** Other radii on request! Test results (TÜV Rhineland safety standards authority) 40

R 16,5

16

4

6/8

24

Panel thickness

vertical surface pressure

horizontal surface pressure

6, 8 mm

1.000 N

3.000 N

¯9

Technical data:

Catalogue number: Material

Panel thickness

Cat. no.

Zinc die cast

6 mm

K 10 175 1

8 mm

K 10 176 1

Stainless steel (VA)

6 mm

K 10 175 5

8 mm

K 10 176 5

Test results (according to ETB directives) 50

Fracture load zinc die cast

4,57 KN

Fracture load stainless steel (VA)

9,14 KN

· Clamp fixture for circular tubes (42,4 mm)** · Panel thickness: 6 and 8 mm · can be used on right and left sides

40

· incl. rubber inserts, self-locking bolts (VA) and cover caps ¯9 40

¯9 BAUART GEPRÜFT TÜV Rheinland Product Safety

50 50

24

Test results (TÜV Rhineland safety standards authority)

R 21

16

16

4

4

6/8

R 21

ETB

geprüft !

TYPE APPROVED

* General construction supervisory approval applied for! ** Other radii on request!

6/8

4

Clamp fixtures (ESG) (tempered safety glass)

Available Finishes: To select the finish for the particular clamp that your require please select the Cat. no for the clamp and then select the finish code. Please note code 16, 55 & 65 are for stainless steel clamps only.

Code

Panel thickness

vertical surface pressure

horizontal surface pressure

6, 8 mm

1.000 N

3.000 N

Catalogue number: Material

Panel thickness

Cat. no.

Zinc die cast

6 mm

K 10 180 1

8 mm

K 10 181 1

Stainless steel (VA)

6 mm

K 10 180 5

8 mm

K 10 181 5

Test results (according to ETB directives) Fracture load zinc die cast

4,57 KN

Fracture load stainless steel (VA)

9,14 KN

Surface style

Code

Surface style

00

untreated

35

brown powder coated (RAL 8019)

09

matt chrome plated

36

black powder coated (RAL 9005)

21

ground matt chrome plated (stainless-steel effect)

37

white powder coated (RAL 9016)

22

ground polished hard-chrome

63

matt nickel plated, brushed (stainless steel finish)

23

ground polished hard chrome bright gold plated

99

special colour (RAL powder coated)*

33

white powder coated (RAL 9010)

16

polished (Stainless Steel Only)

34

aluminium colour powder coated

55

ground (Stainless Steel Only)

65

mirrored (Stainless Steel Rail Bolt Only)

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

149.


Clamp fixtures (ESG) (tempered safety glass) · Clamp fixtures for square tubes

Technical data:

· Panel thickness: 8, 10 and 12 mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA) and cover caps 4 28

55

· Securing pin available as accessory

34

BAUART GEPRÜFT TÜV Rheinland Product Safety

Stainless steel (VA)

ETB

geprüft !

TYPE APPROVED

60

Panel thickness

Cat. no.

8 mm

K 10 200 1

10 mm

K 10 201 1

12 mm

K 10 202 1

8-12

Sicherungsstift

4

28

Test results (TÜV Rhineland safety standards authority) Panel thickness (Material)

vertical surface pressure

horizontal surface pressure

8, 10, 12 mm (zinc)

800 N

3.000 N

8, 10, 12 mm (VA)

1.300 N

3.000 N

34

Test results (according to ETB directives)

8 mm

K 10 200 5

10 mm

K 10 201 5

Fracture load zinc die cast

12 mm

K 10 202 5

Fracture load stainless steel (VA)

¯ 6

16

9,20 KN

Sicherungsstift Securing pin

18,40 KN

· Clamp fixture for circular tubes (40 mm)** · Panel thickness: 8, 10 and 12 mm

8-12

Zinc die cast

¯9

approval applied for! 6 *General16 construction¯supervisory

Catalogue number: Material

55

¯9

Technical data:

· can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA) and cover caps

55

· Securing pin available as accessory

BAUART GEPRÜFT TÜV Rheinland Product Safety

Stainless steel (VA)

Panel thickness

Cat. no.

8 mm

K 10 210 1

10 mm

K 10 211 1

12 mm

K 10 212 1

150.

vertical surface pressure

horizontal surface pressure

8, 10, 12 mm (zinc)¯ 9

800 N

3.000 N

8, 10, 12 mm (VA)

1.300 N

3.000 N

Panel thickness (Material) 55

10 mm

K 10 211 5

Fracture load zinc die cast

12 mm

K 10 212 5

Fracture load stainless steel (VA)

Code

34

Surface style

16

¯ 6 Sicherungsstift

9,20 KN

Securing pin

60

18,40 KN

Code

28

R 20

Test results (according to ETB directives)

K 10 210 5

To select the finish for the particular clamp that your require please select the Cat. no for the clamp and then select the finish code. Please note code 16, 55 & 65 are for stainless steel clamps only.

4

Test results (TÜV Rhineland safety standards authority)

8 mm

Available Finishes:

60

8-12

Zinc die cast

ETB

geprüft !

TYPE APPROVED

* General construction supervisory approval applied for! ** Other radii on request!

Catalogue number: Material

34

¯9

Surface style

00

untreated

35

brown powder coated (RAL 8019)

09

matt chrome plated

36

black powder coated (RAL 9005)

21

ground matt chrome plated (stainless-steel effect)

37

white powder coated (RAL 9016)

22

ground polished hard-chrome

63

matt nickel plated, brushed (stainless steel finish)

23

ground polished hard chrome bright gold plated

99

special colour (RAL powder coated)*

33

white powder coated (RAL 9010)

16

polished (Stainless Steel Only)

34

aluminium colour powder coated

55

ground (Stainless Steel Only)

65

mirrored (Stainless Steel Rail Bolt Only)

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie

R 20


Clamp fixtures (ESG) (tempered safety glass) Technical data:

· Clamp fixture for circular tubes (60 mm)** · Panel thickness: 8, 10 and 12 mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA) and cover caps

55

· Securing pin available as accessory

¯9

BAUART GEPRÜFT TÜV Rheinland Product Safety

60

4

* General construction supervisory approval applied for! ** Other radii on request!

28

4

R 30

34

R 30 8-12

¯ 6

16

Catalogue number:

Test results (TÜV Rhineland safety standards authority) 28

vertical surface pressure

Panel thickness (Material) 34

ETB

geprüft !

TYPE APPROVED

Sicherungsstift

8, 10, 12 mm (zinc)

800 N

3.000 N

8, 10, 12 mm (VA)

1.300 N

3.000 N

¯ 6

9,20 KN

16 Fracture load stainless steel (VA)

18,40 KN

Sicherungsstift

Technical data:

Material

Panel thickness

Zinc die cast

8 mm

K 10 225 1

10 mm

K 10 226 1

12 mm

K 10 227 1

Stainless steel (VA)

8 mm

K 10 225 5

10 mm

K 10 226 5

12 mm

K 10 227 5

Test results (according to ETB directives) Fracture load zinc die cast

Securing pin

horizontal surface pressure

8-12

60

Cat. no.

· Clamp fixture for circular tubes (48.3 mm)** · Panel thickness: 8, 10 and 12 mm · can be used on right and left sides

55

· incl. rubber inserts, self-locking bolts (VA) and cover caps

¯9

55

· Securing pin available as accessory

¯9

BAUART GEPRÜFT

60

4

4

TÜV Rheinland Product Safety

60

ETB

geprüft !

TYPE APPROVED

* General construction supervisory approval applied for! ** Other radii on request!

28 28

Test results (TÜV Rhineland safety standards authority)

R 24

R 24

16

16

¯ 6

¯ 6Sicherungsstift Securing pin Sicherungsstift

8-128-12

34

34

Panel thickness (Material)

vertical surface pressure

horizontal surface pressure

8, 10, 12 mm (zinc)

800 N

3.000 N

8, 10, 12 mm (VA)

1.300 N

3.000 N

To select the finish for the particular clamp that your require please select the Cat. no for the clamp and then select the finish code. Please note code 16, 55 & 65 are for stainless steel clamps only.

Code

Material

Panel thickness

Cat. no.

Zinc die cast

8 mm

K 10 230 1

10 mm

K 10 231 1

12 mm

K 10 232 1

Stainless steel (VA)

8 mm

K 10 230 5

10 mm

K 10 231 5

12 mm

K 10 232 5

Test results (according to ETB directives) Fracture load zinc die cast Fracture load stainless steel (VA)

Available Finishes:

Catalogue number:

Surface style

9,20 KN 18,40 KN

Code

Surface style

00

untreated

35

brown powder coated (RAL 8019)

09

matt chrome plated

36

black powder coated (RAL 9005)

21

ground matt chrome plated (stainless-steel effect)

37

white powder coated (RAL 9016)

22

ground polished hard-chrome

63

matt nickel plated, brushed (stainless steel finish)

23

ground polished hard chrome bright gold plated

99

special colour (RAL powder coated)*

33

white powder coated (RAL 9010)

16

polished (Stainless Steel Only)

34

aluminium colour powder coated

55

ground (Stainless Steel Only)

65

mirrored (Stainless Steel Rail Bolt Only)

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

151.


Clamp fixtures (ESG) (tempered safety glass) Technical data: ¯9

· Panel thickness: 8, 10, 12, 13, 15 and 16 mm

69

· Clamp fixtures for square tubes · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA) and cover caps

60

· Securing pin available as accessory Test results (TÜV Rhineland safety standards authority) vertical surface pressure

horizontal surface pressure

8, 10, 12, 13, 15, 16 mm

1.500 N

3.000 N

34

Panel thickness

Test results (according to ETB directives)

10 mm

K 10 241 5

12 mm

K 10 242 1

12 mm

K 10 242 5

Stainless steel (VA)

K 10 240 5

13 mm

K 10 243 1

13 mm

K 10 243 5

15 mm

K 10 244 1

15 mm

K 10 244 5

16 mm

K 10 245 1

16 mm

K 10 245 5

24¡-

45¡

· Corner clamp fixtures for rectangular tubes, right, with floor for slip guard, with rocker installed

24¡-

8 mm

K 10 241 1

45¡

K 10 240 1

¯6

8 mm 10 mm

34

45¡

9,20 KN

8-16

24¡-

Cat. no.

Sicherungsstift Securing pin

Zinc die cast

Panel thickness

4,60 KN

Fracture load stainless steel (VA)

4

Material

Fracture load zinc die cast

16

Catalogue number:

Technical data:

60 4

8-16

· Panel thickness: 8, 10, 12, 13, 15 and 16 mm 24¡-

45¡

· can be used for stair gradients with pitch angles of 24°- 45°

34

· incl. rubber inserts, self-locking bolts (VA) and cover caps Test results (TÜV Rhineland safety standards authority)

3.000 N

3.000 N 69

Test results (according to ETB directives)

8 mm

K 10 250 1

10 mm

K 10 251 1

12 mm

K 10 252 1

Fracture load zinc die cast

4,60 KN

Fracture load stainless steel (VA)

9,20 KN

16 8 mm

Stainless steel (VA)

10,5

K 10 250 5

10 mm

K 10 251 5

12 mm

K 10 252 5

13 mm

K 10 253 1

13 mm

K 10 253 5

15 mm

K 10 254 1

15 mm

K 10 254 5

16 mm

K 10 255 1

16 mm

K 10 255 5

To select the finish for the particular clamp that your require please select the Cat. no for the clamp and then select the finish code. Please note code 16, 55 & 65 are for stainless steel clamps only.

Code

Surface style

Code

Abrutschsicherung Wippe Slip guard 45¡

Cat. no.

24

24¡-

Panel thickness

Available Finishes:

Surface style

60 4

¯9

00

untreated

35

brown powder coated (RAL 8019)

09

matt chrome plated

36

black powder coated (RAL 9005)

21

ground matt chrome plated (stainless-steel effect)

37

white powder coated (RAL 9016)

22

ground polished hard-chrome

63

matt nickel plated, brushed (stainless steel finish)

23

ground polished hard chrome bright gold plated

99

special colour (RAL powder coated)*

33

white powder coated (RAL 9010)

16

polished (Stainless Steel Only)

34

aluminium colour powder coated

55

ground (Stainless Steel Only)

65

mirrored (Stainless Steel Rail Bolt Only)

BAUART GEPRÜFT TÜV Rheinland Product Safety

152.

¯9

45¡

8, 10, 12, 13, 15, 16 mm

16

24¡-

Zinc die cast

horizontal surface pressure

34

Catalogue number: Material

vertical surface 4 pressure

8-16

8-16

Panel 60 thickness

TYPE APPROVED

ETB

geprüft !

34

16

*General construction supervisory approval applied for!

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie

24 10,5

Abrutschsicherun


45¡ 24¡45¡

5¡ 24¡- 4

· Corner clamp fixtures for square tubes, left, with floor for slip guard, with rocker installed

Technical data: 60

4

· Panel thickness: ¯9 8, 10, 12, 13, 15 and 16 mm

8-16

24¡45¡

34

69

· incl. rubber inserts, 24 self-locking bolts (VA) and cover caps 10,5 Test results (TÜV Rhineland safety standards authority)

16

Wippe Abrutschsicherungvertical

Panel thickness

8-16

¯9

surface pressure

horizontal surface pressure

3.000 N

3.000 N

8, 10, 12, 13, 15, 16 mm

69 24

Test results (according to ETB directives)

10,5 Wippe Abrutschsicherung

Fracture load zinc die cast

4,60 KN

Fracture load stainless steel (VA)

9,20 KN

Stainless steel (VA) 24¡45¡

34

4

24

LL 11x9

10,5 Wippe Abrutschsicherung

34

Panel thickness 16

TÜV Rheinland Product Safety

TYPE APPROVED

12 mm

K 10 262 1

13 mm

K 10 263 5

13 mm

K 10 263 1

15 mm

K 10 264 5

15 mm

K 10 264 1

16 mm

K 10 265 5

16 mm

K 10 265 1

vertical surface ¯ 6pressure Sicherungsstift

Code

Zinc die cast

horizontal surface pressure

1.500 N

3.000 N

Fracture load zinc die cast

4,60 KN

Fracture load stainless steel (VA)

9,20 KN

Stainless steel (VA)

Sicherungsstift Securing pin

BAUART GEPRÜFT

K 10 262 5

Test results (according to ETB directives)

¯6

To select the finish for the particular clamp that your require please select the Cat. no for the clamp and then select the finish code. Please note code 16, 55 & 65 are for stainless steel clamps only.

K 10 261 1

12 mm

Test results (TÜV Rhineland safety standards authority)

34

Available Finishes:

10 mm

34

R 21 2

16

8 mm

K 10 261 5

· Securing pin as accessory

8, 10, 12, 13, 15, 16 mm

34

K 10 260 5

R 21 2

60

4

K 10 260 1

8 mm 10 mm

· incl. rubber inserts, self-locking bolts (VA) and cover caps

8-16

16

Cat. no.

· can be used on right and left sides

69

69

Panel thickness

· Panel thickness: 8, 10, 12, 13, 15 and 16 mm

¯9

8-16

4

Material

· Clamp fixture for circular tubes (42,4 mm)**

Technical data:

60

Catalogue number:

8-16

60

4

· can be used for stair gradients with pitch angles of 24°- 45°

5¡ 24¡- 4

0

Clamp fixtures (ESG) (tempered safety glass)

Catalogue number: Material

Panel thickness

Cat. no. K 10 270 1

8 mm

K 10 270 5

8 mm

10 mm

K 10 271 5

10 mm

K 10 271 1

12 mm

K 10 272 5

12 mm

K 10 272 1

13 mm

K 10 273 5

13 mm

K 10 273 1

15 mm

K 10 274 5

15 mm

K 10 274 1

16 mm

K 10 275 5

16 mm

K 10 275 1

Surface style

Code

Zinc die cast

Surface style

00

untreated

35

brown powder coated (RAL 8019)

09

matt chrome plated

36

black powder coated (RAL 9005)

21

ground matt chrome plated (stainless-steel effect)

37

white powder coated (RAL 9016)

22

ground polished hard-chrome

63

matt nickel plated, brushed (stainless steel finish)

23

ground polished hard chrome bright gold plated

99

special colour (RAL powder coated)*

33

white powder coated (RAL 9010)

16

polished (Stainless Steel Only)

34

aluminium colour powder coated

55

ground (Stainless Steel Only)

65

mirrored (Stainless Steel Rail Bolt Only)

ETB

geprüft !

*General construction supervisory approval applied for!

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

153.


45¡ 24¡-

24¡45¡

Clamp fixtures (ESG) (tempered safety glass) · Corner clamp fixture for circular tubes (42,4 mm)**, right, with floor as slip guard, with rocker installed

Technical data:

60

24¡-

· can be used for stair gradients with pitch angles of 24°- 45°

LL 11x9

4

8-16

45¡

· Panel thickness: 8, 10, 12, 13, 15 and 16 mm

Test results (TÜV Rhineland safety standards authority) Panel thickness

vertical60 surface pressure

horizontal 4 surface pressure

8, 10, 12, 13, 15, 16 mm

1.500 N

3.000 N

34

69

Test results (according to ETB directives)

24

Fracture load zinc die cast

10,5

4,60 KN

16

9,20 KN

Panel thickness

Cat. no.

8 mm

K 10 280 1

8 mm

10 mm

K 10 281 1

10 mm

K 10 281 5

12 mm

K 10 282 1

12 mm

K 10 282 5

13 mm

K 10 283 1

13 mm

K 10 283 5

15 mm

K 10 284 1

15 mm

K 10 284 5

16 mm

K 10 285 1

16 mm

K 10 285 5

24¡45¡

Stainless steel (VA)

Abrutschsicherung Wippe

K 10 280 5

· Panel thickness: 8, 10, 12, 13, 15 and 16 mm 34

· incl. rubber inserts, self-locking bolts (VA) and cover caps

R 21

Test results (TÜV Rhineland safety standards authority)

8, 10, 12, 13, 15, 16 mm

Fracture load zinc die cast Cat. no.

Fracture load stainless steel (VA)

69

Abrutschsicherung Wippe

8-16

LL 11x9

69

3.000 N

24

9,20 KN

K 10 290 1

8 mm

K 10 291 1

10 mm

K 10 291 5

12 mm

K 10 292 1

12 mm

K 10 292 5

13 mm

K 10 293 1

13 mm

K 10 293 5

15 mm

K 10 294 1

15 mm

K 10 294 5

16 mm

K 10 295 1

16 mm

K 10 295 5

K 10 290 5

Surface style

Code

untreated

09

matt chrome plated

45¡

00

Wippe Abrutschsicherung Rocker Slip guard

24¡-

Code

Stainless steel (VA)

10,5

164,60 KN

8 mm

Surface style

35

brown powder coated (RAL 8019) 60

4

36

21

ground matt chrome plated (stainless-steel effect)

22

ground polished hard-chrome

34

black powder coated (RAL 9005)

LL 11x9

37

white powder coated (RAL 9016) 69

R 21

63

24 matt nickel plated, brushed (stainless steel finish)

23

ground polished hard chrome bright gold plated

99

33

white powder coated (RAL 9010)

16

34

aluminium colour powder coated

55

ground (Stainless Steel Only)

65

mirrored (Stainless Steel Rail Bolt Only)

BAUART GEPRÜFT TÜV Rheinland Product Safety

154.

10,5

16

16

60

horizontal 4 surface pressure

10 mm

To select the finish for the particular clamp that your require please select the Cat. no for the clamp and then select the finish code. Please note code 16, 55 & 65 are for stainless steel clamps only.

69

24

8-16

Panel thickness

Available Finishes:

34

5¡ 24¡- 4

Zinc die cast

60

Test results (according to ETB directives)

Catalogue number: Material

34 N 1.500 R 21

LL 11x9

4

R21

· can be used for stair gradients with pitch angles of 24°- 45°

Panel thickness

4

45¡

8-16

Technical data:60

24¡-

· Corner clamp fixture for circular tubes (42,4 mm)**, left, with floor as slip guard, with rocker installed

vertical surface pressure

5¡ 24¡- 4

45¡

Zinc die cast

Abrutschsiche LL 11x9

R21

Fracture load stainless steel (VA)

10,5

16

24¡-

Material

24

8-16

8-16

Catalogue number:

34

R21

· incl. rubber inserts, self-locking bolts (VA) and cover caps

TYPE APPROVED

ETB

geprüft !

16

special colour (RAL powder coated)* polished (Stainless Steel Only) Wippe

10,5

Abrutschsicherung

*General construction supervisory approval applied for!

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie

W


Clamp fixtures (ESG) (tempered safety glass) Technical data:

· Clamp fixture for front place constructions · Panel thickness: 8, 10 and 12 mm · can be used on right and left sides · can be used horizontally and vertically · infinitely variable (0° - 360°)

8-12

· incl. rubber inserts, self-locking bolts (VA) and cover caps

7 4

¯ 60

12

¯ 8,5

Catalogue number: Test results (TÜV Rhineland safety standards authority) Panel thickness

vertical surface pressure

horizontal surface pressure

8, 10, 12 mm

800 N

3.000 N

5,8

28

Material

Panel thickness

Cat. no.

Zinc die cast

8 mm

K 10 500 1

10 mm

K 10 501 1

12 mm

K 10 502 1

Stainless steel (VA)

8 mm

K 10 500 5

10 mm

K 10 501 5

12 mm

K 10 502 5

Test results (according to ETB directives)

Technical data:

Fracture load zinc die cast

11,34 KN

Fracture load stainless steel (VA)

22,67 KN

· Clamp fixture for front place constructions · Panel thickness: 8, 10 and 12 mm · can be used on right and left sides · can be used horizontally and vertically · infinitely variable (0° - 360°) · incl. rubber inserts, self-locking bolts (VA) and cover caps

8-12 7 4

¯60

12

¯ 8, 5

Catalogue number:

5,8

Test results (TÜV Rhineland safety standards authority)

28

Panel thickness

vertical surface pressure

horizontal surface pressure

8, 10, 12 mm

800 N

3.000 N

Material

Panel thickness

Zinc die cast

8 mm

K 10 525 1

10 mm

K 10 526 1

12 mm

K 10 527 1

Stainless steel (VA)

8 mm

K 10 525 5

10 mm

K 10 526 5

12 mm

K 10 527 5

Test results (according to ETB directives)

Available Finishes: To select the finish for the particular clamp that your require please select the Cat. no for the clamp and then select the finish code. Please note code 16, 55 & 65 are for stainless steel clamps only.

BAUART GEPRÜFT TÜV Rheinland Product Safety

TYPE APPROVED

Code

Fracture load zinc die cast

22,24 KN

Fracture load stainless steel (VA)

44,45 KN

Surface style

Code

Cat. no.

Surface style

00

untreated

35

brown powder coated (RAL 8019)

09

matt chrome plated

36

black powder coated (RAL 9005)

21

ground matt chrome plated (stainless-steel effect)

37

white powder coated (RAL 9016)

22

ground polished hard-chrome

63

matt nickel plated, brushed (stainless steel finish)

23

ground polished hard chrome bright gold plated

99

special colour (RAL powder coated)*

33

white powder coated (RAL 9010)

16

polished (Stainless Steel Only)

34

aluminium colour powder coated

55

ground (Stainless Steel Only)

65

mirrored (Stainless Steel Rail Bolt Only)

ETB

geprüft !

*General construction supervisory approval applied for!

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

155.


Clamp fixtures (ESG) (tempered safety glass) · Bolt-on section for rectangular tubes or for circular tubes (42.4 mm / 60 mm)**, for clamp systems cat. no. 10 500 -10 527 ff

Technical data: 11 Cat. no. 10 550 ff

· can be used horizontally and vertically · infinitely variable (0° - 360°) 36 ¯ 8,5

42,4 30

11 BAUART GEPRÜFT TÜV Rheinland Product Safety

Catalogue number: Material

Installation surface

Cat. no.

ETB

geprüft !

TYPE APPROVED

* General construction supervisory approval applied for! ** Other radii on request!

K 10 550 1

30

11

straight K 10 560 1

Ø 42,4 mm

Ø 60 mm

36

K 10 550 5

straight Zinc die cast

Cat. no. 10 560 ff

¯ 8,5

Stainless steel (VA)

K 10 560 5 36 ¯ 8,5

Ø 42,4 mm

60

K 10 570 5

K 10 570 1

Ø 60 mm

Cat. no. 10 570 ff

· Clamp fixture for flat extension surfaces · Panel thickness: 6 - 16 mm · incl. plastic flat washers, plastic tubing section and 40 mm set screw (VA)

Technical data: 8,5

Mount for C-spanner Aufnahme für Hakenschlüssel

¯3 0 BAUART GEPRÜFT TÜV Rheinland Product Safety

TYPE APPROVED

ETB

M8

geprüft !

6-16

Catalogue number:

Test results (TÜV Rhineland safety standards authority)

Material

Panel thickness

Cat. no.

Zinc die cast

6 - 16 mm

K 10 580 1

Panel thickness

vertical surface pressure

horizontal surface pressure

6 - 16 mm

700 N

2.000 N

Glasbohrung Glass bore

Test results (according to ETB directives) Stainless steel (VA)

6 - 16 mm

Available Finishes: To select the finish for the particular clamp that your require please select the Cat. no for the clamp and then select the finish code. Please note code 16, 55 & 65 are for stainless steel clamps only.

156.

K 10 580 5

Code

Fracture load zinc die cast

3,90 KN

Fracture load stainless steel (VA)

7,80 KN

Surface style

Code

Surface style

00

untreated

35

brown powder coated (RAL 8019)

09

matt chrome plated

36

black powder coated (RAL 9005)

21

ground matt chrome plated (stainless-steel effect)

37

white powder coated (RAL 9016)

22

ground polished hard-chrome

63

matt nickel plated, brushed (stainless steel finish)

23

ground polished hard chrome bright gold plated

99

special colour (RAL powder coated)*

33

white powder coated (RAL 9010)

16

polished (Stainless Steel Only)

34

aluminium colour powder coated

55

ground (Stainless Steel Only)

65

mirrored (Stainless Steel Rail Bolt Only)

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie

30


Clamp fixtures (ESG) (tempered safety glass) Technical data:

· Panel thickness: 6 - 16 mm · incl. plastic flat washers, plastic tubing section and 40 mm set screw (VA)

8,5

Mount for C-spanner Aufnahme für Hakenschlüssel

· Clamp fixture for circular tubes (42,2 mm)*

M8 ¯30

1

R2

BAUART GEPRÜFT TÜV Rheinland Product Safety

8,5 6-16 Aufnahme für Hakenschlüssel

TYPE APPROVED

ETB

geprüft !

*Other radii on request!

Test results (TÜV Rhineland safety standards authority) ¯3 0 M8 Glasbohrung 6-16

vertical surface pressure

horizontal surface pressure

6 - 16 mm

700 N

2.000 N

Material

Panel thickness

Cat. no.

Zinc die cast

6 - 16 mm

K 10 581 1

Stainless steel (VA)

6 - 16 mm

K 10 581 5

Test results (according to ETB directives)

Glass bore

Technical data:

Fracture load zinc die cast

3,90 KN

Fracture load stainless steel (VA)

7,80 KN

· Clamp fixture for flat extension surfaces · Panel thickness: 6 - 16 mm · incl. plastic flat washers, plastic tubing section and 50 mm anchor screw (VA) for wood installation

8,5

Mount for C-spanner Aufnahme für Hakenschlüssel

Panel thickness

Catalogue number:

¯30

BAUART GEPRÜFT TÜV Rheinland Product Safety

¯8

TYPE APPROVED

ETB

geprüft !

6-16

Test results (TÜV Rhineland safety standards authority)

Glasbohrung Glass bore

Available Finishes: To select the finish for the particular clamp that your require please select the Cat. no for the clamp and then select the finish code. Please note code 16, 55 & 65 are for stainless steel clamps only.

Panel thickness

vertical surface pressure

horizontal surface pressure

6 - 16 mm

700 N

2.000 N

Catalogue number: Material

Panel thickness

Cat. no.

Zinc die cast

6 - 16 mm

K 10 585 1

Stainless steel (VA)

6 - 16 mm

K 10 585 5

Test results (according to ETB directives)

Code

Fracture load zinc die cast

3,90 KN

Fracture load stainless steel (VA)

7,80 KN

Surface style

Code

Surface style

00

untreated

35

brown powder coated (RAL 8019)

09

matt chrome plated

36

black powder coated (RAL 9005)

21

ground matt chrome plated (stainless-steel effect)

37

white powder coated (RAL 9016)

22

ground polished hard-chrome

63

matt nickel plated, brushed (stainless steel finish)

23

ground polished hard chrome bright gold plated

99

special colour (RAL powder coated)*

33

white powder coated (RAL 9010)

16

polished (Stainless Steel Only)

34

aluminium colour powder coated

55

ground (Stainless Steel Only)

65

mirrored (Stainless Steel Rail Bolt Only)

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

157.


Clamp fixtures (ESG) (tempered safety glass) · Angle clamp fixture 90°

Technical data:

· Panel thickness: 6, 8 and 10 mm 24

50 4

14

,5

geprüft !

610

4

TYPE APPROVED

24 50 4

50 24

ETB

14 ,

BAUART GEPRÜFT TÜV Rheinland Product Safety

5

610

4

50 24

· incl. rubber inserts, self-locking bolt (VA) and cap

Catalogue number: 6 mm

K 10 600 1

8 mm

K 10 601 1

10 mm

K 10 602 1

Test results (TÜV Rhineland safety standards authority) Panel thickness

vertical surface pressure

horizontal surface pressure

6, 8, 10 mm

600 N

2.000 N

K 10 600 5

Test results (according to ETB directives)

8 mm

K 10 601 5

Fracture load zinc die cast

13,45 KN

10 mm

K 10 602 5

Fracture load stainless steel (VA)

26,89 KN

6 mm

16

· Clamp fixture for circular tubes (48.3 mm) for front-placed constructions

64

Note: Hight of the clamp fixture is 45 mm! Caution: Gap width = 14.5 mm for all panel thicknesses (6/8/10)!

80

Technical data: 32

50 36 4

44

6-

· incl. rubber inserts, self-locking bolts (VA) and cover caps

27

· Securing pin (accessory category) and insertion angle 10 990 1 00 (p. 39) optional 1

¯6 LL 16x8 Sicherungsstift Securing pin

4,

TÜV Rheinland Product Safety

24

10

· can be used on right and left sides

BAUART GEPRÜFT

4

4

· Panel thickness : 8, 10, 12, 13, 15 and 16 mm

8-16

Stainless steel (VA)

Cat. no.

24

Zinc die cast

Panel thickness

50

Material

4

14

,5

5

ETB

geprüft !

TYPE APPROVED

48,3

* General construction supervisory approval applied for! Catalogue number:

Zinc die cast

Panel thickness

Cat. no.

8 mm

K 10 900 1

10 mm

K 10 901 1

12 mm

K 10 902 1

13 mm

K 10 903 1

Panel thickness

vertical surface pressure

horizontal surface pressure

8, 10, 12, 13, 15, 16 mm

1.300 N

3.000 N

15 mm

K 10 904 1

Test results (according to ETB directives)

16 mm

K 10 905 1

Fracture load zinc die cast

Available Finishes: To select the finish for the particular clamp that your require please select the Cat. no for the clamp and then select the finish code. Please note code 16, 55 & 65 are for stainless steel clamps only.

158.

Test results (TÜV Rhineland safety standards authority)

Code

Surface style

64

80

10,67 KN

Code

Surface style

00

untreated

35

brown powder 32 coated 4 (RAL 36 8019)

09

matt chrome plated

36

black powder coated (RAL 9005)

21

ground matt chrome plated (stainless-steel effect)

37

white powder coated (RAL 9016)

22

ground polished hard-chrome

63

matt nickel27plated, brushed (stainless steel finish)

23

ground polished hard chrome bright gold plated

99

special colour (RAL powder coated)*

33

white powder coated (RAL 9010)

16

polished (Stainless Steel Only)

34

aluminium colour powder coated

55

ground (Stainless Steel Only)

65

mirrored (Stainless Steel Rail Bolt Only)

44

8-16

Material

¯6 LL 16x8 Sicherungsstift

48,3

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


64

130

Clamp fixtures (ESG) (tempered safety glass) Technical data:

· Clamp fixture for circular tubes (48.3 mm) for front-placed constructions · Exterior angle 90˚

4

· Panel thickness: 8, 10, 12, 13, 15 and 16 mm · can be used on right and left sides

36

42

· incl. rubber inserts, self-locking bolts (VA) and caps LL 16x8

8-

27

· Securing pin (accessory category) and insertion angle optional

16

¯6 Sicherungsstift Securing pin

32 48,3

BAUART GEPRÜFT TÜV Rheinland Product Safety

ETB

geprüft !

TYPE APPROVED

* General construction supervisory approval applied for! Catalogue number: Test results (TÜV Rhineland safety standards authority)

64 64

Panel thickness 8, 10, 12, 13, 15, 16 mm

130 130

vertical surface pressure

horizontal surface pressure

1.300 N

3.000 N

Technical data:

16 8-

27

4

Securing pin ¯6 Sicherungsstift

Cat. no.

8 mm

K 10 910 1

10 mm

K 10 911 1

12 mm

K 10 912 1

13 mm

K 10 913 1

15 mm

K 10 914 1

16 mm

K 10 915 1

10,96 KN

· Clamp fixture for circular tubes (48.3 mm) for front-placed constructions · Interior angle 90˚ · can be used on right and left sides

76

4

LL 16x8

16

8-

27

32 48,3

· incl. rubber inserts, self-locking bolts (VA) and cover caps

36

¯6 Sicherungsstift LL 16x8

· Securing pin (accessory category) and insertion angle optional BAUART GEPRÜFT TÜV Rheinland Product Safety

ETB

geprüft !

TYPE APPROVED

* General construction supervisory approval applied for!

32 48,3

Catalogue number: Test results (TÜV Rhineland safety standards authority) Panel thickness

vertical surface pressure

horizontal surface pressure

8, 10, 12, 13, 15, 16 mm

1.300 N

3.000 N

64

130

Available Finishes:

Code

To select the finish for the particular clamp that your require please select the Cat. no for the clamp and then select the finish code. ¯6 Please note code 16, 55 & Sicherungsstift 65 are for stainless steel clamps only.

Zinc die cast

Panel thickness

Cat. no.

8 mm

K 10 920 1

10 mm

K 10 921 1

12 mm

K 10 922 1

13 mm

K 10 923 1

15 mm

K 10 924 1

Fracture load zinc die cast

16 mm

K 10 925 1

Surface style

10,96 KN

Code

Surface style

00

untreated

35

brown powder coated (RAL 8019)

09

matt chrome plated

36

black powder coated (RAL 9005)

21

ground matt chrome plated (stainless-steel effect)

37

white powder coated (RAL 9016)

ground polished hard-chrome

63

matt nickel plated, brushed (stainless steel finish)

23

ground polished hard chrome bright gold plated

99

special colour (RAL powder coated)*

33

white powder coated (RAL 9010)

16

polished (Stainless Steel Only)

346

aluminium colour powder coated

55

ground (Stainless Steel Only)

65

mirrored (Stainless Steel Rail Bolt Only)

22

4

Material

Test results (according to ETB directives)

3

27

16

Panel thickness

· Panel thickness: 8, 10, 12, 13, 15 and 16 mm

36

42

8-

Zinc die cast

Test results (according to ETB directives) Fracture load zinc die cast

76

Material

LL 16x8

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

159.


128

Clamp fixtures (ESG) (tempered safety glass) · Clamp fixture for circular tubes (48.3 mm)** for front-placed constructions

Technical data:

· Panel thickness: 8, 10, 12, 13, 15 and 16 mm

36

4

· can be used on right and left sides

44

27

8-16

· incl. rubber inserts, self-locking bolts (VA) and caps

6� LL 16x8 ¯Sicherungsstift Securing pin

· Securing pin (accessory category) and insertion angle optional BAUART GEPRÜFT TÜV Rheinland Product Safety

ETB

32 48,3

geprüft !

TYPE APPROVED

* General construction supervisory approval applied for! Catalogue number: Material

Zinc die cast

64

Test results (TÜV Rhineland safety standards authority)

Panel thickness

Cat. no.

8 mm

K 10 930 1

10 mm

K 10 931 1

12 mm

K 10 932 1

13 mm

K 10 933 1

15 mm

K 10 934 1

Test results (according to ETB directives)

16 mm

K 10 935 1

Fracture load zinc die cast

Panel thickness

vertical surface pressure

horizontal surface pressure

8, 10, 12, 13, 15, 16 mm

1.300 N

3.000 N

64 136

128

10,67 KN

· Clamp fixture for circular tubes (48.3 mm)** for front-placed constructions

Technical data:

· Exterior angle 135˚

4

· Panel thickness: 8, 10, 12, 13, 15 and 16 mm

36

36

4

42 44

LL 16x8 6� LL 16x8 ¯Sicherungsstift ¯ 6� Sicherungsstift Securing pin

27

27

8-16

· incl. rubber inserts, self-locking bolts (VA) and cover caps

8-16

· can be used on right and left sides

· Securing pin (accessory category) and insertion angle optional BAUART GEPRÜFT TÜV Rheinland Product Safety

Panel thickness 8 mm

K 10 940 1

10 mm

K 10 941 1

Test results (TÜV Rhineland safety standards authority) Panel thickness

vertical surface pressure

horizontal surface pressure

8, 10, 12, 13, 15, 16 mm

1.300 N

3.000 N

12 mm

K 10 942 1

13 mm

K 10 943 1

15 mm

K 10 944 1

Test results (according to ETB directives)

16 mm

K 10 945 1

Fracture load zinc die cast

Available Finishes: To select the finish for the particular clamp that your require please select the Cat. no for the clamp and then select the finish code. Please note code 16, 55 & 65 are for stainless steel clamps only.

Code

Surface style

64

136

10,96 KN

Code

Surface style

00

untreated

35

brown powder coated (RAL 8019)

09

matt chrome plated

36

black powder coated (RAL 9005)

21

ground matt chrome plated (stainless-steel effect)

37

white powder coated (RAL 9016)

22

ground polished hard-chrome

63

matt nickel plated, brushed (stainless steel finish)

23

ground polished hard chrome bright gold plated

99

special colour (RAL powder coated)*

33

white powder coated (RAL 9010)

16

polished (Stainless Steel Only)

34

aluminium colour powder coated

55

ground (Stainless Steel Only)

65

mirrored (Stainless Steel Rail Bolt Only)

4

36

8-16

160.

Cat. no.

42

LL 16x8

27

Zinc die cast

geprüft !

* General construction supervisory approval applied for!

Catalogue number: Material

32 48,3 32 48,3

ETB

TYPE APPROVED

32 48,3

¯ 6� Sicherungsstift

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


136

Clamp fixtures (ESG) (tempered safety glass) Technical data:

27

36

· Clamp fixture for circular tubes (48.3 mm)** for front-placed constructions · Interior angle 135˚ · Panel thickness: 8, 10, 12, 13, 15 and 16 mm

4

8-16

· can be used on right and left sides 56

¯6 Sicherungsstift

LL 16x8

· incl. rubber inserts, self-locking bolts (VA) and caps · Securing pin (accessory category) and inser tion angle optional

Securing pin

BAUART GEPRÜFT

32 48,3

TÜV Rheinland Product Safety

ETB

geprüft !

TYPE APPROVED

* General construction supervisory approval applied for! Test results (TÜV Rhineland safety standards authority) Panel thickness

64

8, 10, 12, 13, 15, 16 mm 136 7

Technical data:

1.300 N

horizontal surface pressure

Material

Panel thickness

Zinc die cast

3.000 N

Cat. no.

8 mm

K 10 950 1

10 mm

K 10 951 1

12 mm

K 10 952 1

13 mm

K 10 953 1

Test results (according to ETB directives)

15 mm

K 10 954 1

Fracture load zinc die cast

16 mm

K 10 955 1

10,96 KN

Insertion angle with bump stop as floor as slip guard for clamp fixtures cat. no. K10 900 1 ff to ~K10 955 1 ff can be used

· When appling the insertion angle, the distance from the panel glass to the tube is reduced by 3 mm.

3

36 30,25 4

27

·

vertical surface pressure

Catalogue number:

32,75 8-16

56 ¯6 Sicherungsstift

LL 16x8

32 48,3

7

Available 3 Finishes: To select the finish for the particular clamp that your require please select the 30,25 Cat. no for the clamp and then select the finish code. Please note code 16, 55 & 65 are for stainless steel clamps only.

Code

Catalogue number:

Surface style

Code

Cat. no.

Material

K 10 990 1 00

Zinc die cast

Surface style

00

untreated

35

brown powder coated (RAL 8019)

09

matt chrome plated

36

black powder coated (RAL 9005)

21

ground matt chrome plated (stainless-steel effect)

37

white powder coated (RAL 9016)

22

ground polished hard-chrome

63

matt nickel plated, brushed (stainless steel finish)

23

ground polished hard chrome bright gold plated

99

special colour (RAL powder coated)*

33

white powder coated (RAL 9010)

16

polished (Stainless Steel Only)

34

aluminium colour powder coated

55

ground (Stainless Steel Only)

65

mirrored (Stainless Steel Rail Bolt Only)

32,75

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

161.


System overview 27

Glasmitte Centre of glass

X = Longitudinal dimension of tube centre point to tube centre point Y = longitudinal dimension of the respective board filling

End clamp system End-Klemm-System Cat. no. K 10 900 1 Art.-Nr. 10 900 1

X

Innenwinkel 90° Art.-Nr. 10 920 1 Interior angle 90° Cat. no. K 10 920 1

X

X

Y

Y

Middle clamp system Mittel-Klemm-System Art.-Nr. 10 930 1 Cat. no. K 10 930 1

X

Y

Außenwinkel 90° Cat. no. K 10 910 1 Art.-Nr. 10 910 1 Exterior angle 90˚

Y

Exterior angle 135˚ Cat. no. K 10 940 1

Y

X

Außenwinkel 135° Art.-Nr. 10 940 1

Innenwinkel 135° Art.-Nr. 10 950 1

Interior angle 135° Cat. no. K 10 950 1

Ill. shows balcony front side X

Y

Regen-� rinne Rain gutter End-Klemm-System Art.-Nr. 10 900 1 27

162.

End clamp system Cat. no. K 10 900 1

Glasmitte Centre of glass

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Possible combinations / clamp fixtures (ESG) X = Y =

Longitudinal dimension of tube centre point to tube centre point longitudinal dimension of the respective board filling

The dimensions sated in the table refer to the distance from the respective tube centre point and only apply to the stated tube diameters.

Example: Y = X + – Tabular value Cat. no.

Illustration

Ø 33,7

Ø 40

Ø 42,4

Ø 48,3

Ø 50

Ø 60

K 10 900 K 10 900

-40

-40

-40

-40

-40

-40

K 10 900 K 10 910

-13

-9

-8

-5

-4

-2

K 10 900 K 10 930

-40

-40

-40

-40

-40

-40

K 10 900 K 10 920

-100

-103

-104

-106

-107

-110

K 10 900 K 10 940

-28

-26

-25

-24

-24

-22

K 10 900 K 10 950

-63

-64

-65

-66

-66

-69

K 10 910 K 10 910

+14

+22

+24

+30

+32

+36

K 10 910 K 10 930

-13

-9

-8

-5

-4

-2

K 10 910 K 10 920

-70

-70

-71

-71

-71

-73

K 10 910 K 10 940

-1

+5

+6

+11

+12

+16

K 10 910 K 10 950

-35

-33

-33

-31

-31

-30

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

163.


Possible combinations / clamp fixtures (ESG) X = Y =

Longitudinal dimension of tube centre point to tube centre point longitudinal dimension of the respective board filling

The dimensions sated in the table refer to the distance from the respective tube centre point and only apply to the stated tube diameters.

Example: Y = X + – Tabular value Cat. no.

Ø 33,7

Ø 40

Ø 42,4

Ø 48,3

Ø 50

Ø 60

K 10 930 K 10 930

-40

-40

-40

-40

-40

-40

K 10 930 K 10 920

-101

-103

-104

-106

-107

-110

K 10 930 K 10 940

-28

-26

-25

-24

-24

-22

K 10 930 K 10 950

-63

-64

-65

-66

-67

-69

K 10 920 K 10 920

-162

-166

-168

-172

-174

-180

K 10 920 K 10 940

-88

-89

-89

-90

-91

-91

K 10 920 K 10 950

-122

-127

-129

-132

-133

-137

K 10 940 K 10 940

-16

-12

-10

-8

-8

-4

K 10 940 K 10 950

-50

-50

-50

-50

-50

-50

-84

-88

-90

-92

-94

-96

K 10 950 K 10 950

164.

Illustration

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Clamp fixtures (VSG) (composite glass) · Clamp fixtures for square tubes · Glass thickness: 8.76, 9.52, 10.76, 11.52, 12.76 and 13.52 mm · can be used on right and left sides · incl. rubber inserts, bump stops, Self-locking bolts (VA), covering hood and securing pin

BAUART GEPRÜFT TÜV Rheinland Product Safety

60 34

8,76-13,52

4

ETB

geprüft !

TYPE APPROVED

¯9

34

69

*General construction supervisory approval applied for! ¯6 Sicherungsstift

16

34

60 34

8,76-13,52

604 34

4

8,76-13,52

Technical data:

¯9

34

69

16

16

¯9

69

¯6 ¯6 Sicherungsstift Sicherungsstift Securing pin

Test results (TÜV Rhineland safety standards authority)

Test results (according to ETB directives)

Glass thickness (mm)

vertical surface pressure

horizontal surface pressure

Fracture load Zinc die casting

4,60 KN

8.76, 9.52, 10.76, 11.52, 12.76, 13.52

4.000 N

3.000 N

Fracture load stainless steel (VA)

9,20 KN

Catalogue number: Material

Zinc die cast

Glass thickness

Code

Surface style

8,76 mm

K 15 001 1

00

untreated

9,52 mm

K 15 002 1

09

matt chrome plated

10,76 mm

K 15 003 1

21

ground matt chrome plated (stainless-steel effect)

11,52 mm

K 15 004 1

22

ground polished hard chrome

12,76 mm 13,52 mm

Stainless steel (VA)

Cat. no.

K 15 005 1

23

ground polished hard chrome bright gold plated

33

white powder coated (RAL 9010)

34

aluminium colour powder coated

8,76 mm

K 15 001 5

35

brown powder coated (RAL 8019)

9,52 mm

K 15 002 5

36

black powder coated (RAL 9005)

10,76 mm

K 15 003 5

37

white powder coated (RAL 9016)

11,52 mm

K 15 004 5

12,76 mm 13,52 mm

K 15 005 5

63

matt nickel plated, brushed (stainless steel finish)

99

Special colour (RAL powder coated)*

16

polished

55

ground

PU

4 each

4 each

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

165.


Clamp fixtures (VSG) (composite glass) · Corner clamp fixtures for rectangular tubes, right, with base for slip guard, with installed rocker · Glass thickness: 8.76, 9.52, 10.76, 11.52, 12.76 and 13.52 mm

24¡- 4 5¡

24¡- 4 5¡ 45¡

· incl. rubber inserts, self-locking bolts (VA) and cover caps

BAUART GEPRÜFT TÜV Rheinland Product Safety

24¡-

24¡-

45¡

· an be used for stair gradients with pitch angles of 24°- 45°

ETB

geprüft !

TYPE APPROVED

*General construction supervisory approval applied for!

4

¯9

34

16

16

¯9 69

34 24

24

10,5

10,5

69

24¡- 4 5¡

60

4

45¡

60

24¡-

8,76-13,52

8,76-13,52

Technical data:

Wippe Abrutschsicherung Abrutschsicherung Slip guard

Wippe Rocker

Test results (TÜV Rhineland safety standards authority)

Test results (according to ETB directives)

vertical surface pressure

horizontal surface pressure

8.76, 9.52, 10.76, 11.52, 12.76, 13.52

5.000 N

3.000 N 8,76-13,52

Glass thickness (mm)

Fracture load Zinc die casting

4,60 KN

Fracture load stainless steel (VA)

9,20 KN

60

4

¯9

Material

Glass thickness 8,76 mm

Zinc die cast

Code

10,5

Surface style

K 15 010 1

00

untreated

16

K 15 011 1

09

matt chrome plated

K 15 012 1

21

ground matt chrome plated (stainless-steel effect)

11,52 mm

K 15 013 1

22

ground polished hard chrome

K 15 014 1

23

ground polished hard chrome bright gold plated

33

white powder coated (RAL 9010)

34

aluminium colour powder coated

8,76 mm

K 15 010 5

35

brown powder coated (RAL 8019)

9,52 mm

K 15 011 5

36

black powder coated (RAL 9005)

10,76 mm

K 15 012 5

37

white powder coated (RAL 9016)

11,52 mm

K 15 013 5

12,76 mm 13,52 mm

166.

Cat. no.

9,52 mm

13,52 mm

Stainless steel (VA)

24

10,76 mm 12,76 mm

69

34

Catalogue number:

K 15 014 5

63

matt nickel plated, brushed (stainless steel finish)

99

Special colour (RAL powder coated)*

16

polished

55

ground

PU

Abrutschsicherung

4 each

4 each

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie

Wippe


Clamp fixtures (VSG) (composite glass) · Corner clamp fixtures for rectangular tubes, left, with base for slip guard, with installed rocker · Glass thickness: 8.76, 9.52, 10.76, 11.52, 12.76 and 13.52 mm

5¡ 24¡- 4

5¡ 24¡- 4

24¡-

24¡-

· an be used for stair gradients with pitch angles of 24°- 45° · incl. rubber inserts, self-locking bolts (VA) and cover caps

45¡

45¡

BAUART GEPRÜFT TÜV Rheinland Product Safety

ETB

geprüft !

TYPE APPROVED

*General construction supervisory approval applied for!

34

4

60

8,76-13,52

60

69

69

¯9

24 10,5

Abrutschsicherung Wippe Abrutschsicherung Slip guard

16

45¡

24 10,5

24¡-

34

16

¯9

5¡ 24¡- 4

4

8,76-13,52

Technical data:

Wippe Rocker

Test results (TÜV Rhineland safety standards authority)

Test results (according to ETB directives)

vertical surface pressure

horizontal surface pressure

Fracture load Zinc die casting

4,60 KN

8.76, 9.52, 10.76, 11.52, 12.76, 13.52

5.000 N

3.000 N

Fracture load stainless steel (VA)

9,20 KN

4

60

Catalogue number: Material

Zinc die cast

Glass thickness

Code

Surface style

PU

K 15 015 1

00

untreated

9,52 mm

K 15 016 1

09

matt chrome plated

10,76 mm

K 15 017 1

21

ground matt chrome plated (stainless-steel effect)

11,52 mm

K 15 018 1

22

ground polished hard chrome

23

ground polished hard chrome bright gold plated

13,52 mm

K 15 019 1

33

white powder coated (RAL 9010)

34

aluminium colour powder coated

8,76 mm

K 15 015 5

35

brown powder coated (RAL 8019)

K 15 016 5

36

black powder coated (RAL 9005)

10,76 mm

K 15 017 5

37

white powder coated (RAL 9016)

11,52 mm

K 15 018 5

13,52 mm

K 15 019 5

24 10,5

16

9,52 mm

12,76 mm

¯9 69

34

8,76 mm

12,76 mm

Stainless steel (VA)

Cat. no.

8,76-13,52

Glass thickness (mm)

63

matt nickel plated, brushed (stainless steel finish)

99

Special colour (RAL powder coated)*

16

polished

55

ground

Abrutschsicherung

Wippe

4 each

4 each

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

167.


min. Rmin. = 85 R =mm85 mm Clamp fixtures (VSG) (composite glass) bei Glasdicken von max. 10,76 10,76 mm mm bei Glasdicken von max.

· Clamp fixture for circular tubes (42,4 mm)** · Glass thickness: 8.76, 9.52, 10.76, 11.52, 12.76 and 13.52 mm · can be used on right and left sides · incl. rubber inserts, bump stops, self-locking bolts (VA), covering hood and securing pin 8¡

BAUART GEPRÜFT TÜV Rheinland Product Safety

ETB

geprüft !

TYPE APPROVED

min. R = 85 mm bei Glasdicken vonconstruction max. 10,76 mm General supervisory approval applied for!

* ** Other radii on request!

8,76-13,52

60 60 4 34 34

4

8,76-13,52

Technical data:

LL 11x9 LL 11x9

34 34 R 21 R 21

69

16

16

69

min. R = 85 mm bei Glasdicken von max. 10,76 mm min. R = 85 mm for glass thickness of max. 10.76 mm

¯6 ¯6 Sicherungsstift Sicherungsstift Securing pin

Test results (TÜV Rhineland safety standards authority) vertical surface pressure

horizontal surface pressure

Fracture load Zinc die casting

4,60 KN

8.76, 9.52, 10.76, 11.52, 12.76, 13.52

4.000 N

3.000 N

Fracture load stainless steel (VA)

9,20 KN

60 34

Catalogue number:

Zinc die cast

Glass thickness

34

R 21 Code

69

Surface style

PU

8,76 mm

K 15 020 1

00

9,52 mm

K 15 021 1

10,76 mm

K 15 022 1

¯6 09 16 matt chrome plated Sicherungsstift 21 ground matt chrome plated (stainless-steel effect)

11,52 mm

K 15 023 1

22

ground polished hard chrome

23

ground polished hard chrome bright gold plated

12,76 mm 13,52 mm

Stainless steel (VA)

Cat. no.

LL 11x9

K 15 024 1

untreated

33

white powder coated (RAL 9010)

34

aluminium colour powder coated

4 each

8,76 mm

K 15 020 5

35

brown powder coated (RAL 8019)

9,52 mm

K 15 021 5

36

black powder coated (RAL 9005)

10,76 mm

K 15 022 5

37

white powder coated (RAL 9016) 4

11,52 mm

K 15 023 5

63

matt nickel plated, brushed (stainless steel finish)

99

Special colour (RAL 34 powder coated)*

16

polished

55

ground

12,76 mm 13,52 mm

K 15 024 5

60 34

8,76-13,52

Material

8,76-13,52

Glass thickness (mm)

4

168.

Test results (according to ETB directives)

69

R 21

16

LL 11x9

¯6 Sicherungsstift

4 each

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Clamp fixtures (VSG) (composite glass) = 85 mm min. R min. = 85Rmm bei circular Glasdicken von max. mm 10,76 mm mm)**, bei Glasdicken von max. 10,76 · Corner clamp fixture for tubes (42.4 right, with base for slip guard, with rocker installed

· Glass thickness: 8.76, 9.52, 10.76, 11.52, 12.76 and 13.52 mm · an be used for stair gradients with pitch angles of 24°- 45° · incl. rubber inserts, self-locking bolts (VA) and cover caps 45¡ 24¡-

45¡

45¡

24¡-

BAUART GEPRÜFT

ETB

24¡-

45¡ 24¡-

TÜV Rheinland Product Safety

min. R = 85 mm bei Glasdicken von max. 10,76 mm

geprüft !

TYPE APPROVED

* General construction supervisory approval applied for! ** Other radii on request! Technical data:

60 4

LL 11x9LL 11x9

16

69

69 24

24

10,5

10,5

45¡

34 34 R 21 R 21

24¡-

45¡

4

24¡-

60

8,76-13,52

min. R = 85 mm bei Glasdicken von max. 10,76 mm

Abrutschsicherung Wippe Wippe Abrutschsicherung Slip guard Rocker

16

Test results (TÜV Rhineland safety standards authority)

Test results (according to ETB directives)

Glass thickness (mm)

vertical surface pressure

horizontal surface pressure

Fracture load Zinc die casting

4,60 KN

8.76, 9.52, 10.76, 11.52, 12.76, 13.52

5.000 N

3.000 N

Fracture load stainless steel (VA)

9,20 KN

8,76 mm

K 15 025 1

00

untreated

K 15 026 1

09

16 plated matt chrome

24

24¡-

Surface style

34

10,5

PU

Abrutschsicherung Wippe

10,76 mm

K 15 027 1

21

ground matt chrome plated (stainless-steel effect)

11,52 mm

K 15 028 1

22

ground polished hard chrome

12,76 mm

K 15 029 1

23

ground polished hard chrome bright gold plated

33

white powder coated (RAL 9010)

34

aluminium colour powder coated

8,76 mm

K 15 025 5

35

brown powder coated (RAL 8019)

9,52 mm

K 15 026 5

36

black powder coated (RAL 9005)

10,76 mm

K 15 027 5

37

white powder coated (RAL 9016)

11,52 mm

K 15 028 5

12,76 mm 13,52 mm

K 15 029 5

69

24¡-

Code

9,52 mm

13,52 mm

Stainless steel (VA)

Cat. no.

R 21

8,76-13,52

Zinc die cast

Glass thickness

LL 11x9

4

45¡

8,76-13,52

Catalogue number: Material

60

45¡

8,76-13,52

min. R = 85 mm for glass thickness of max. 10.76 mm

4 each

60

LL 11x9

4

63

matt nickel plated, brushed (stainless steel finish)

99

Special colour (RAL powder coated)*

16

polished

55

ground

R 21

34

24 10,5

16

4 each

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

Abrutschsicherung Wippe

169.


min. Rmin. = 85R mm = 85 mm bei Glasdicken von max. mm mm bei Glasdicken von 10,76 max. 10,76

Clamp fixtures (VSG) (composite glass) · Corner clamp fixture for circular tubes (42.4 mm)**, left, with floor for slip guard, with rocker installed · Glass thickness: 8.76, 9.52, 10.76, 11.52, 12.76 and 13.52 mm · an be used for stair gradients with pitch angles of 24°- 45° 5¡ 24¡- 4 24¡- 4 5¡ 24¡45¡

5¡ 24¡- 4

· incl. rubber8¡ inserts, self-locking bolts (VA) and cover caps

min. R = 85 mm bei Glasdicken von max. 10,76 mm TÜV Rheinland Product Safety

BAUART GEPRÜFT

ETB

geprüft !

TYPE APPROVED

* General construction supervisory approval applied for! ** Other radii on request!

LL 11x9 LL 11x9 69

R 34 21 R 21

69 24

24

24¡-

10,5 10,5

16

45¡

16

Abrutschsicherung WippeWippe Abrutschsicherung Slip guard Rocker

Test results (TÜV Rhineland safety standards authority) horizontal surface pressure

Fracture load Zinc die casting

4,60 KN

5.000 N

3.000 N

Fracture load stainless steel (VA)

9,20 KN

4

Catalogue number: Glass thickness

34

R 21

Surface style

PU

69

00

untreated

K 15 031 1

09

matt chrome plated

10,76 mm

K 15 032 1

21

ground matt chrome plated (stainless-steel effect) 16

11,52 mm

K 15 033 1

22

ground polished hard chrome

23

ground polished hard chrome bright gold plated

K 15 034 1

24

Abrutschsicherung Wippe

33

white powder coated (RAL 9010)

34

aluminium colour powder coated

8,76 mm

K 15 030 5

35

brown powder coated (RAL 8019)

9,52 mm

K 15 031 5

36

black powder coated (RAL 9005)

4 each

10,76 mm

K 15 032 5

37

white powder coated (RAL 9016)

11,52 mm

K 15 033 5

63

matt nickel plated, brushed (stainless steel finish)

99

Special colour (RAL powder coated)*

16

polished

55

ground

12,76 mm 13,52 mm

K 15 034 5

34

10,5

45¡

K 15 030 1

24¡-

8,76 mm

13,52 mm

170.

Code

LL 11x9

9,52 mm

12,76 mm

Stainless steel (VA)

Cat. no.

60

5¡ 24¡- 4

Zinc die cast

Test results (according to ETB directives)

vertical surface pressure

8.76, 9.52, 10.76, 11.52, 12.76, 13.52

Material

min. R = 85 mm bei Glasdicken von max. 10,76 mm

8,76-13,52

Glass thickness (mm)

5¡ 24¡- 4

34

60

R 21

4

60

8,76-13,52

4

min. R = 85 mm for glass thickness of max. 10.76 mm

8,76-13,52

60 4

8,76-13,52

Technical data:

4 each

16 www.glassparts.ie From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web:

69

Abrutschsicherung W


Hinged saddle (VSG) (composite glass) · Hinged saddle as insert for clamp fixtures Cat. no. 15 020 5 ff to 15 034 5 ff can be used

Technical data:

min. R = 85 mm for glass thickness of max. 10.76 mm

Catalogue number: Cat. no.

Material

Surface style

PU

K 15 100 5 00

Stainless steel (VA)

untreated

4 each

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

171.


Clamp fixtures (VSG) (composite glass) · Clamp fixtures for square tubes · Glass thickness 12.76, 13.52, 14.76, 15.52, 16.76 mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA) and cover caps · Insertion angle 15 590 5 55 optional (p. 12)

ETB

geprüft !

*General construction supervisory approval applied for!

Technical data:

Test results (according to ETB directives) Fracture load stainless steel (VA)

12,27 KN

Catalogue number: Material

Stainless steel (VA)

172.

Glass thickness

Cat. no.

Code

Surface style

12,76 mm

K 15 500 5

16

polished

13,52 mm

K 15 501 5

55

ground

14,76 mm

K 15 502 5

15,52 mm

K 15 503 5

16,76 mm

K 15 504 5

PU 4 each

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Clamp fixtures (VSG) (composite glass) · Clamp fixtures for square tubes · Glass thickness 17.52, 18.76, 19.52, 20.76, 21.52 mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA) and cover caps · Insertion angle 15 590 5 55 optional (p. 12)

ETB

geprüft !

*General construction supervisory approval applied for!

Technical data:

Rocker

Insertion angle

Test results (according to ETB directives) Fracture load stainless steel (VA)

12,27 KN

Catalogue number: Material

Stainless steel (VA)

Glass thickness

Cat. no.

Code

Surface style

17,52 mm

K 15 510 5

16

polished

18,76 mm

K 15 511 5

55

ground

19,52 mm

K 15 512 5

20,76 mm

K 15 513 5

21,52 mm

K 15 514 5

PU 4 each

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

173.


Clamp fixtures (VSG) (composite glass) · Clamp fixture for circular tubes (42,4 mm)** · Glass thickness 12.76, 13.52, 14.76, 15.52, 16.76 mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA) and cover caps · Insertion angle 15 590 5 55 optional (p. 12)

ETB

geprüft !

* General construction supervisory approval applied for! ** Other radii on request!

Technical data:

Rocker

Insertion angle

Test results (according to ETB directives) Fracture load stainless steel (VA)

12,27 KN

Catalogue number: Material

Stainless steel (VA)

174.

Glass thickness

Cat. no.

Code

Surface style

12,76 mm

K 15 520 5

16

polished

13,52 mm

K 15 521 5

55

ground

14,76 mm

K 15 522 5

15,52 mm

K 15 523 5

16,76 mm

K 15 524 5

PU 4 each

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Clamp fixtures (VSG) (composite glass) · Clamp fixture for circular tubes (42,4 mm)** · Glass thickness: 17.52, 18.76, 19.52, 20.76, 21.52 mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA) and cover caps · Insertion angle 15 595 5 55 optional (p. 12)

ETB

geprüft !

* General construction supervisory approval applied for! ** Other radii on request!

Technical data:

Rocker

Insertion angle

Test results (according to ETB directives) Fracture load stainless steel (VA)

12,27 KN

Catalogue number: Material

Stainless steel (VA)

Glass thickness

Cat. no.

Code

Surface style

17,52 mm

K 15 530 5

16

polished

18,76 mm

K 15 531 5

55

ground

19,52 mm

K 15 532 5

20,76 mm

K 15 533 5

21,52 mm

K 15 534 5

PU 4 each

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

175.


Insertion angles (VSG) (composite glass) Technical data: 23 23 23

35,6 35,6 35,6

17x9 17x9 17x9

49,5 49,5 49,5

28 28 28 26,5 26,5 26,5

· Insertion angles with bump stop as base for slip guards for the retention system cat. no. 15 510 5 55 ff and 15 530 5 55 ff can be used · can be used for stair gradients with pitch angles of 24°- 45°

22,8 22,8 22,8

· When appling the insertion angle, the distance from the panel glass to the tube is reduced by 3 mm. Catalogue number: Cat. no.

Material

Surface style

PU

K 15 590 5 55

Stainless steel (VA)

ground

2 each

Insertion angles (VSG) (composite glass) Technical data: 23

35,6

2323

35,6 35,6

49,5

17x9

49,5 49,5

17x9 17x9

28 2828 26,5

· Insertion angles with bump stop as base for slip guards for the retention system cat. no. 15 510 5 55 ff and 15 530 5 55 ff can be used

26,5 26,5

· can be used for stair gradients with pitch angles of 24°- 45°

26,4

· When appling the insertion angle, the distance from the panel glass to the tube is reduced by 3 mm.

26,4 26,4

Catalogue number:

176.

Cat. no.

Material

Surface style

PU

K 15 595 5 55

Stainless steel (VA)

ground

2 each

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Clamp fixtures (VSG) (tempered safety glass) · Clamp fixtures for square tubes · Glass thickness: 8,76, 10,76 and 12,76 mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA) and cover caps · Securing pin available as accessory

ETB

geprüft !

Technical data:

4

24 55 Test results (according to ETB directives)

55

Ø9

34

Fracture load zinc die cast 8,76-12,76

8,76-12,76

Ø9

Ø6

16

Fracture load stainless steel (VA)

Sicherungsstift Securing pin

55

9,20 KN 18,40 KN

55

Catalogue number: Material

Glass thickness

Zinc die cast

8,76 mm

K 15 600 1

00

untreated

10,76 mm

K 15 601 1

09

matt chrome plated

12,76 mm

K 15 602 1

21

ground matt chrome plated (stainless-steel effect)

22

ground polished hard-chrome

23

ground polished hard chrome bright gold plated

Stainless steel (VA)

8,76 mm

Cat. no.

K 15 600 5

Code

Surface style

10,76 mm

K 15 601 5

33

white powder coated (RAL 9010)

12,76 mm

K 15 602 5

34

aluminium colour powder coated

35

brown powder coated (RAL 8019)

36

black powder coated (RAL 9005)

37

white powder coated (RAL 9016)

63

matt nickel plated, brushed (stainless steel finish)

99

special colour (RAL powder coated)*

16

polished

55

ground

PU

4 each

4 each

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

177.


Clamp fixtures (VSG) (tempered safety glass) · Clamp fixture for circular tubes (48.3 mm)* · Glass thickness: 8,76, 10,76 and 12,76 mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA) and cover caps · Securing pin available as accessory

55

ETB

Ø9

geprüft !

*Other radii on request! 55

Technical data:

4

24

Test results (according to ETB directives)

55

34

Fracture load zinc die cast

R 24

16

Ø6 Sicherungsstift Securing pin

55

8,76-12,76

Ø9

Fracture load stainless steel (VA)

9,20 KN 18,40 KN

Catalogue number: Glass thickness 4

Zinc die cast 34

R 24

Stainless steel (VA)

178.

24

Cat. no.

Code

Surface style

8,76 mm

K 15 610 1

00

untreated

10,76 mm

K 15 611 1

09

matt chrome plated

12,76 mm

K 15 612 1

21

ground matt chrome plated (stainless-steel effect)

22

ground polished hard-chrome

K 15 610 5

23

ground polished hard chrome bright gold plated

Ø6 K 15 611 5 1610,76 mm Sicherungsstift 12,76 mm K 15 612 5

33

white powder coated (RAL 9010)

34

aluminium colour powder coated

8,76 mm

8,76-12,76

Material

35

brown powder coated (RAL 8019)

36

black powder coated (RAL 9005)

37

white powder coated (RAL 9016)

63

matt nickel plated, brushed (stainless steel finish)

99

special colour (RAL powder coated)*

16

polished

55

ground

PU

4 each

4 each

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Clamp fixtures (VSG) (tempered safety glass) · Clamp fixtures for square tubes · Glass thickness: 8,76 and 10,76 mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA) and cover caps · Securing pin available as accessory

ETB

geprüft !

Technical data: 45 16

28

Ø9

Test results (according to ETB directives) Ø9

Fracture load zinc die cast

28

45

4

3,99 KN

63

Ø 6 Sicherungsstift Securing pin

8,76-10,76

63

7,98 KN

8,76-10,76

Fracture load stainless steel (VA)

Catalogue number: Material

Glass thickness

Zinc die cast

8,76 mm

K 15 620 1

00

untreated

10,76 mm

K 15 621 1

09

matt chrome plated

21

ground matt chrome plated (stainless-steel effect)

Stainless steel (VA)

Cat. no.

Code

Surface style

8,76 mm

K 15 620 5

22

ground polished hard-chrome

10,76 mm

K 15 621 5

23

ground polished hard chrome bright gold plated

33

white powder coated (RAL 9010)

34

aluminium colour powder coated

35

brown powder coated (RAL 8019)

36

black powder coated (RAL 9005)

37

white powder coated (RAL 9016)

63

matt nickel plated, brushed (stainless steel finish)

99

special colour (RAL powder coated)*

16

polished

55

ground

PU

4 each

4 each

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

179.


Clamp fixtures (VSG) (tempered safety glass) · Clamp fixture for circular tubes (48.3 mm)* · Glass thickness: 8,76 and 10,76 mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA) and cover caps · Securing pin available as accessory

ETB

geprüft !

*Other radii on request!

Technical data:

9

16

28

Test results (according to ETB directives) Ø9

16

R 24

Ø 6 Sicherungsstift 28 pinR 24 Securing

63

4

28

3,99 KN

Fracture load stainless steel (VA)

7,98 KN

Ø 6 Sicherungsstift

8,76-10,76

28

63

Fracture load zinc die cast

8,76-10,76

45

4

Catalogue number: Material

Glass thickness

Zinc die cast

8,76 mm

K 15 630 1

00

untreated

10,76 mm

K 15 631 1

09

matt chrome plated

21

ground matt chrome plated (stainless-steel effect)

Stainless steel (VA)

180.

Cat. no.

Code

Surface style

8,76 mm

K 15 630 5

22

ground polished hard-chrome

10,76 mm

K 15 631 5

23

ground polished hard chrome bright gold plated

33

white powder coated (RAL 9010)

34

aluminium colour powder coated

35

brown powder coated (RAL 8019)

36

black powder coated (RAL 9005)

37

white powder coated (RAL 9016)

63

matt nickel plated, brushed (stainless steel finish)

99

special colour (RAL powder coated)*

16

polished

55

ground

PU

4 each

4 each

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Clamp fixtures (VSG) (tempered safety glass) · Clamp fixture for circular tubes (42,4 mm)* · Glass thickness: 8,76 and 10,76 mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA) and cover caps · Securing pin available as accessory

ETB

geprüft !

*Other radii on request! 45

Ø9

Technical data: 63

4

16

Test results (according to ETB directives) 28

R 21

Ø 6 Sicherungsstift Securing pin

63

16

Catalogue number:

28

Material

Glass thickness

Zinc die cast

8,76 mm

K 15 640 1

10,76 mm

K 15 641 1

Stainless steel (VA)

8,76-10,76

Ø9

Cat. no.

4

Fracture load zinc die cast

3,99 KN

Fracture load stainless steel (VA)

7,98 KN

28

R 21

Code

Surface style

untreated Ø00 6 Sicherungsstift

8,76-10,76

45

28

09

matt chrome plated

21

ground matt chrome plated (stainless-steel effect)

8,76 mm

K 15 640 5

22

ground polished hard-chrome

10,76 mm

K 15 641 5

23

ground polished hard chrome bright gold plated

33

white powder coated (RAL 9010)

34

aluminium colour powder coated

35

brown powder coated (RAL 8019)

36

black powder coated (RAL 9005)

37

white powder coated (RAL 9016)

63

matt nickel plated, brushed (stainless steel finish)

99

special colour (RAL powder coated)*

16

polished

55

ground

PU

4 each

4 each

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

181.


Clamp fixtures (VSG) (tempered safety glass) · Clamp fixtures for square tubes · Glass thickness: 8,76, 10,76 and 12,76 mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA) and cover caps · Securing pin available as accessory

ETB

geprüft !

Technical data: 4

55

Ø9

Test results (according to ETB directives) 34

Ø9

Fracture load zinc die cast

Ø 6

16

Sicherungsstift Securing pin

60

8,76-12,76

55

28

9,20 KN 60KN 18,40

Fracture load stainless steel (VA)

Catalogue number: Material

Glass thickness

Zinc die cast

8,76 mm

K 15 650 1

00

untreated

10,76 mm

K 15 651 1

09

matt chrome plated

12,76 mm

K 15 652 1

21

ground matt chrome plated (stainless-steel effect)

22

ground polished hard-chrome

23

ground polished hard chrome bright gold plated

Stainless steel (VA)

182.

8,76 mm

Cat. no.

K 15 650 5

Code

Surface style

10,76 mm

K 15 651 5

33

white powder coated (RAL 9010)

12,76 mm

K 15 652 5

34

aluminium colour powder coated

35

brown powder coated (RAL 8019)

36

black powder coated (RAL 9005)

37

white powder coated (RAL 9016)

63

matt nickel plated, brushed (stainless steel finish)

99

special colour (RAL powder coated)*

16

polished

55

ground

PU

4 each

4 each

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Clamp fixtures (VSG) (tempered safety glass) · Clamp fixture for circular tubes (40 mm)* · Glass thickness: 8,76, 10,76 and 12,76 mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA) and cover caps · Securing pin available as accessory

ETB

geprüft !

*Other radii on request!

Technical data: 4 4

34

Ø9 Ø9

34

Test results (according to ETB directives)

R 20 R 20

16 16

Ø 6 Ø 6Sicherungsstift

8,76-12,76 8,76-12,76

55 55

28 28

Fracture load zinc die cast

9,20 KN

Fracture load stainless steel (VA)

18,40 KN

Sicherungsstift Securing pin

60 60

Catalogue number: Material

Glass thickness

Zinc die cast

8,76 mm

K 15 660 1

00

untreated

10,76 mm

K 15 661 1

09

matt chrome plated

12,76 mm

K 15 662 1

21

ground matt chrome plated (stainless-steel effect)

22

ground polished hard-chrome

23

ground polished hard chrome bright gold plated

Stainless steel (VA)

8,76 mm

Cat. no.

K 15 660 5

Code

Surface style

10,76 mm

K 15 661 5

33

white powder coated (RAL 9010)

12,76 mm

K 15 662 5

34

aluminium colour powder coated

35

brown powder coated (RAL 8019)

36

black powder coated (RAL 9005)

37

white powder coated (RAL 9016)

63

matt nickel plated, brushed (stainless steel finish)

99

special colour (RAL powder coated)*

16

polished

55

ground

PU

4 each

4 each

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

183.


Clamp fixtures (VSG) (tempered safety glass) · Clamp fixture for circular tubes (60 mm)* · Glass thickness: 8,76, 10,76 and 12,76 mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA) and cover caps · Securing pin available as accessory

ETB

55

geprüft !

Ø9

*Other radii on request!

60

Technical data:

4

Test results (according to ETB directives) 34

Fracture load zinc die cast

R 30

Ø 6

16

4

Material

Glass thickness

Zinc die cast

10,76 mm

184.

18,40 KN

8,76 mm 34

Cat. no.

28

Code

Surface style

K 15 670 1

00

untreated

R 671 30 1 K 15

09

matt chrome plated

K 15 672 1

21

ground matt chrome plated (stainless-steel effect)

22 Stainless steel (VA)

Fracture load stainless steel (VA)

Securing pin

Catalogue number:

8,76 mm

9,20 KN

Sicherungsstift

60

12,76 mm

8,76-12,76

Ø9

K 15 670 5

16

23

Ø 6

PU

8,76-12,76

55

28

ground polished hard-chrome ground polished hard chrome bright gold plated

Sicherungsstift

10,76 mm

K 15 671 5

33

12,76 mm

K 15 672 5

34

white powder coated (RAL 9010) aluminium colour powder coated

35

brown powder coated (RAL 8019)

36

black powder coated (RAL 9005)

37

white powder coated (RAL 9016)

63

matt nickel plated, brushed (stainless steel finish)

99

special colour (RAL powder coated)*

16

polished

55

ground

4 each

4 each

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Clamp fixtures (VSG) (tempered safety glass) · Clamp fixture for circular tubes (48.3 mm)* · Glass thickness: 8,76, 10,76 and 12,76 mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA) and cover caps · Securing pin available as accessory

ETB

geprüft !

55

*Other radii on request!

Ø9

60

Technical data:

4

55

28

Test results (according to ETB directives) Ø9

34

Fracture load zinc die cast

R 24

9,20 KN

16 60

4

Ø 6 Sicherungsstift Securing pin

18,40 KN

8,76-12,76

Fracture load stainless steel (VA)

28

Catalogue number:

34

R 24

Glass thickness

Zinc die cast 16

Stainless steel (VA)

Cat. no.

Code

Surface style

8,76 mm

K 15 680 1

00

untreated

10,76 mm

K 15 681 1

09

matt chrome plated

12,76 mm

K 15 682 1

21

ground matt chrome plated (stainless-steel effect)

22

ground polished hard-chrome

23

ground polished hard chrome bright gold plated

Ø 6

8,76-12,76

Material

8,76Sicherungsstift mm K 15 680 5 10,76 mm

K 15 681 5

33

white powder coated (RAL 9010)

12,76 mm

K 15 682 5

34

aluminium colour powder coated

35

brown powder coated (RAL 8019)

36

black powder coated (RAL 9005)

37

white powder coated (RAL 9016)

63

matt nickel plated, brushed (stainless steel finish)

99

special colour (RAL powder coated)*

16

polished

55

ground

PU

4 each

4 each

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

185.


Clamp fixtures (VSG) (composite glass) · Clamp fixture for circular tubes (48,3 mm)** for front placed constructions · Glass thickness: 8.76, 9.52, 10.76, 11.52, 12.76 and 13.52 mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA), cover caps and securing pin · Insertion angle cat. no. 15 990 1 00 (p. 19) optional

64 BAUART GEPRÜFT TÜV Rheinland Product Safety

ETB

geprüft !

TYPE APPROVED

* General construction supervisory approval applied for! ** Other radii and millings for flat extension surfaces available on request!

80

Technical data:

32

4

Test results (TÜV Rhineland safety standards authority)

36

44

Glass thickness (mm)

vertical surface pressure

horizontal surface pressure

8.76, 9.52, 10.76, 11.52, 12.76, 13.52

1.500 N

3.000 N

LL 16x8

¯6 Sicherungsstift Securing pin

8,76-13,52

64

27

Test results (according to ETB directives) 48,3

80

Catalogue number:

Zinc die cast

186.

Glass thickness

32

Cat. no.

Code 44

4

Surface style

PU

8,76 mm

K 15 900 1

9,52 mm

K 15 901 1

10,76 mm

K 15 902 1

33

white powder¯6coated (RAL 9010)

11,52 mm

K 15 903 1

34

aluminium colour powder coated matt nickel plated, brushed (stainless steel finish)

27

10,67 KN

36

00

untreated

21

ground LL 16x8matt chrome plated (stainless-steel effect) Sicherungsstift

8,76-13,52

Material

Fracture load Zinc die casting

12,76 mm

K 15 904 1

63

13,52 mm

K 15 905 1

99 48,3 Special colour (RAL powder coated)*

2 each

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Clamp fixtures (VSG) (composite glass) · Clamp fixture for circular tubes (48,3 mm)** for front placed constructions · Exterior angle 90˚ · Glass thickness: 8.76, 9.52, 10.76, 11.52, 12.76 and 13.52 mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA), cover caps and securing pin · Insertion angle cat. no. 15 990 1 00 (p. 19) optional

64 BAUART GEPRÜFT TÜV Rheinland Product Safety

ETB

geprüft !

TYPE APPROVED

approval applied for! * General construction supervisory 130 ** Other radii and millings for flat extension surfaces available on request!

Technical data:

4

Test results (TÜV Rhineland safety standards authority) 36

42

64

LL 16x8

27

,52

13

6-

8,7

32 48,3

¯6 Sicherungsstift Securing pin

Glass thickness (mm)

vertical surface pressure

horizontal surface pressure

8.76, 9.52, 10.76, 11.52, 12.76, 13.52

1.500 N

3.000 N

Test results (according to ETB directives) 130

Fracture load Zinc die casting

10,96 KN

Catalogue number: Cat. no.

8,76 mm

K 15 910 1

9,52 mm

Code

Surface style

PU

00

untreated

K 15 911 1

21

ground matt chrome plated (stainless-steel effect)

10,76 mm

K 15 912 1

11,52 mm

K 15 913 1

33 white powder coated (RAL 9010) LL 16x8 aluminium colour powder coated 34

12,76 mm

K 15 914 1

27 63

13,52 mm

K 15 915 1

99

42

PUPreis (Stck.)

36

Zinc die cast

Glass thickness

4

Material

15,80 e 22,70 e 2 each 2 each

¯6

19,30 e 19,30 e

8,7

24,80 e

Special colour (RAL powder coated)*

19,30 e

,5 13 6-

matt nickel plated, brushed (stainless steel finish) Sicherungsstift 32 48,3

2

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

187.


Clamp fixtures (VSG) (composite glass) · Clamp fixture for circular tubes (48,3 mm)** for front placed constructions · Interior angle 90˚ · Glass thickness: 8.76, 9.52, 10.76, 11.52, 12.76 and 13.52 mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA), cover caps and securing pin · Insertion angle cat. no. 15 990 1 00 (p. 19) optional

64

BAUART GEPRÜFT TÜV Rheinland Product Safety

ETB

geprüft !

TYPE APPROVED

* General construction supervisory approval applied for! ** Other radii and millings for flat extension surfaces available on request!

130

Technical data:

,52 13 68,7

27

Securing pin ¯6 Sicherungsstift

Test results (TÜV Rhineland safety standards authority)

36 4

76

LL 16x8

64

Glass thickness (mm)

vertical surface pressure

horizontal surface pressure

8.76, 9.52, 10.76, 11.52, 12.76, 13.52

1.500 N

3.000 N

Test results (according to ETB directives)

32 48,3

Fracture load Zinc die casting

130

10,96 KN

Catalogue number:

Zinc die cast

Code

13

,52

Cat. no. K 15 920 1

00

6-

8,76 mm

8,7

Glass thickness

Surface ¯style 6 Sicherungsstift

27

Material

9,52 mm

K 15 921 1

21

ground matt chrome plated (stainless-steel effect)

10,76 mm

K 15 922 1

33

white powder coated6(RAL 9010)

11,52 mm

K 15 923 1

34

aluminium colour 4powder coated

63

matt nickel plated, brushed (stainless steel finish)

99

Special colour (RAL powder coated)*

12,76 mm

K 15 924 1

13,52 mm

K 15 925 1

76

PU

untreated

3

2 each

LL 16x8

32 48,3

188.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Clamp fixtures (VSG) (composite glass) · Clamp fixture for circular tubes (48,3 mm)** for front placed constructions · Glass thickness: 8.76, 9.52, 10.76, 11.52, 12.76 and 13.52 mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA), cover caps and securing pin · Insertion angle cat. no. 15 990 1 00 (p. 19) optional

BAUART GEPRÜFT TÜV Rheinland Product Safety

64ETB geprüft !

TYPE APPROVED

* General construction supervisory approval applied for! ** Other radii and millings for flat extension surfaces available on request! 128

Technical data:

8,76-13,52

36

Test results (TÜV Rhineland safety standards authority)

4

44

27

Glass thickness (mm)

vertical surface pressure

horizontal surface pressure

8.76, 9.52, 10.76, 11.52, 12.76, 13.52

1.500 N

3.000 N

64 ¯6 � Sicherungsstift Securing pin

LL 16x8

32 48,3

Test results (according to ETB directives)

128

Fracture load Zinc die casting

10,67 KN

Catalogue number:

Zinc die cast

Glass thickness

4 Code 36 Surface style

Cat. no.

8,76 mm

K 15 930 1

00

9,52 mm

K 15 931 1

27 21

8,76-13,52

Material

PU

untreated

44

ground matt chrome plated (stainless-steel effect)

33

white powder coated (RAL 9010)

34

Sicherungsstift aluminium colour powder coated

K 15 934 1

63

matt nickel plated, brushed (stainless steel finish)

K 15 935 1

99

Special colour (RAL powder coated)*

10,76 mm

K 15 932 1

11,52 mm

K 15 933 1

12,76 mm 13,52 mm

LL 16x8

¯6 �

2 each

32 48,3

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

189.


Clamp fixtures (VSG) (composite glass) · Clamp fixture for circular tubes (48,3 mm)** for front placed constructions · Exterior angle 135˚ · Glass thickness: 8.76, 9.52, 10.76, 11.52, 12.76 and 13.52 mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA), cover caps and securing pin · Insertion angle cat. no. 15 990 1 00 (p. 19) optional 64

BAUART GEPRÜFT

136

TÜV Rheinland Product Safety

ETB

geprüft !

TYPE APPROVED

* General construction supervisory approval applied for! ** Other radii and millings for flat extension surfaces available on request! Technical data: 4

Test results (TÜV Rhineland safety standards authority) 36

42

vertical surface pressure

horizontal surface pressure

8.76, 9.52, 10.76, 11.52, 12.76, 13.52

1.500 N

3.000 N

64

52

32 48,3

¯6 � Sicherungsstift Securing pin

27

LL 16x8

-13,

8,76

Glass thickness (mm)

Test results (according to ETB directives) 136

Fracture load Zinc die casting

10,96 KN

Catalogue number: Cat. no.

Code

Surface style

PU

8,76 mm

K 15 940 1

00

untreated

9,52 mm

K 15 941 1

21

ground matt chrome plated (stainless-steel effect)

10,76 mm

K 15 942 1

33

white powder coated (RAL 9010)

11,52 mm

K 15 943 1

34

aluminium colour powder coated

12,76 mm

K 15 944 1

63

matt nickel plated, brushed (stainless steel finish)

13,52 mm

K 15 945 1

5 -13, 8,76

Zinc die cast

Glass thickness

4

36

42

2 each

LL 16x8

99

Special colour (RAL powder coated)*

2

¯6 � Sicherungsstift

27

Material

32 48,3

190.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Clamp fixtures (VSG) (composite glass) · Clamp fixture for circular tubes (48,3 mm)** for front placed constructions · Interior angle 135˚ · Glass thickness: 8.76, 9.52, 10.76, 11.52, 12.76 and 13.52 mm · can be used on right and left sides · incl. rubber inserts, self-locking bolts (VA), cover caps and securing pin 64

· Insertion angle cat. no. 15 990 1 00 (p. 19) optional

136 BAUART GEPRÜFT TÜV Rheinland Product Safety

ETB

geprüft !

TYPE APPROVED

* General construction supervisory approval applied for! ** Other radii and millings for flat extension surfaces available on request! Technical data:

27

36

4

Test results (TÜV Rhineland safety standards authority)

LL 16x8

52

-13,

8,76

¯6 Sicherungsstift

56

Glass thickness (mm)

vertical surface pressure

horizontal surface pressure

8.76, 9.52, 10.76, 11.52, 12.76, 13.52

1.500 N

3.000 N

64

Securing pin

Test results (according to ETB directives) 136

32 48,3

Fracture load Zinc die casting

10,96 KN

Catalogue number:

Zinc die cast

Glass thickness

Cat. no.

Code

Surface style

PU

8,76 mm

K 15 950 1

00

untreated

9,52 mm

K 15 951 1

21

ground matt chrome plated (stainless-steel effect)

10,76 mm

K 15 952 1

33

white powder coated (RAL 9010) 4

11,52 mm

K 15 953 1

34

aluminium colour powder coated

12,76 mm

K 15 954 1

63

matt nickel plated, brushed (stainless steel finish)

13,52 mm

K 15 955 1

99

56 Special colour (RAL powder coated)*

27

Material

36

2 each

52 -13, 8,76

¯6 Sicherungsstift

LL 16x8

32 48,3

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

191.


Insertion angles (VSG) (composite glass) · Insertion angle with bump stop as floor as slip guard for clamp fixtures Cat. no. 15 900 1 ff to 15 954 1 ff can be used · When appling the insertion angle, the distance from the panel glass to the tube is reduced by 3 mm.

7

Technical data:

3

30,25

32,75 7

3

Catalogue number:

192.

Cat. no.

Material

K 15 990 1 00

Zinc die cast

30,25

Surface style

PU

untreated

2 each

32,75

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


System overview 27

Glasmitte Centre of glass

X = longitudinal dimension of tube centre point to tube centre point Y = longitudinal dimension of the respective board filling

End clamp system Cat. no. K 15 900 1

End-Halte-System Art.-Nr. 15 900 1

X

Innenwinkel 90° Art.-Nr. 15 920 1

X

X

Y

Y

Y

Interior angle 90° Cat. no. K 15 920 1 Middle clamp system Cat. no. K 15 930 1

X

Mittel-Halte-System Art.-Nr. 15 930 1

Exterior angle 90˚ Außenwinkel 90° Cat. no. K 15 910 1 Art.-Nr. 15 910 1

Y

Exterior angle 135˚ Cat. no. K 15 940 1

Y

X

Außenwinkel 135° Art.-Nr. 15 940 1

Innenwinkel 135° Art.-Nr. 15 950 1

Interior angle 135° Cat. no. K 15 950 1

Ill. shows balcony front side X

Y

Regen-� rinne Rain gutter End-Halte-System Art.-Nr. 15 900 1 27

End clamp system Cat. no. K 15 900 1

Glasmitte Centre of glass

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

193.


Possible combinations / clamp fixtures (VSG) X = Y =

longitudinal dimension of tube centre point to tube centre point longitudinal dimension of the respective board filling

The dimensions stated in the table refer to the distance from the respective tube centre point and only apply to the stated tube diameters.

Example:Y = X + – Tabular value Cat. no.

194.

Illustration

Ø 33,7

Ø 40

Ø 42,4

Ø 48,3

Ø 50

Ø 60

K 15 900 - K 15 900

-40

-40

-40

-40

-40

-40

K 15 900 - K 15 910

-13

-9

-8

-5

-4

-2

K 15 900 - K 15 930

-40

-40

-40

-40

-40

-40

K 15 900 - K 15 920

-100

-103

-104

-106

-107

-110

K 15 900 - K 15 940

-28

-26

-25

-24

-24

-22

K 15 900 -K 15 950

-63

-64

-65

-66

-66

-69

K 15 910 - K 15 910

+14

+22

+24

+30

+32

+36

K 15 910 - K 15 930

-13

-9

-8

-5

-4

-2

K 15 910 - K 15 920

-70

-70

-71

-71

-71

-73

K 15 910 - K 15 940

-1

+5

+6

+11

+12

+16

K 15 910 - K 15 950

-35

-33

-33

-31

-31

-30

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Possible combinations / clamp fixtures (VSG) X = Y =

Longitudinal dimension of tube centre point to tube centre point longitudinal dimension of the respective board filling

The dimensions stated in the table refer to the distance from the respective tube centre point and only apply to the stated tube diameters.

Example:Y = X + – Tabular value Cat. no.

Ø 33,7

Ø 40

Ø 42,4

Ø 48,3

Ø 50

Ø 60

K 15 930 - K 15 930

-40

-40

-40

-40

-40

-40

K 15 930 - K 15 920

-101

-103

-104

-106

-107

-110

K 15 930 - K 15 940

-28

-26

-25

-24

-24

-22

K 15 930 - K 15 950

-63

-64

-65

-66

-67

-69

K 15 920 - K 15 920

-162

-166

-168

-172

-174

-180

K 15 920 - K 15 940

-88

-89

-89

-90

-91

-91

K 15 920 - K 15 950

-122

-127

-129

-132

-133

-137

K 15 940 - K 15 940

-16

-12

-10

-8

-8

-4

K 15 940 - K 15 950

-50

-50

-50

-50

-50

-50

-84

-88

-90

-92

-94

-96

K 15 950 - K 15 950

Illustration

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

195.


Notes

196.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


POINT FIXTURES


SF-PT12

Point Fixtures

SF-PT12

Technical data:

SF-PZ

SF-PZ

SF-PT14 16

SF-PT12

SF-PZ

Catalogue number: Cat. no.

Description

Material

Surface style

KSP013

M14 Countersunk Bolt

Stainless Steel

Satin

Point Fixtures Technical data:

SF-PZ

SF-PT14 16

Catalogue number: Cat. no.

Description

Material

Surface style

KSP014

M14 Flat Bolt

Stainless Steel

Satin

SF-PT14 16

Point Fixtures

Technical data:

Catalogue number:

198.

Cat. no.

Description

Material

Surface style

KSP015

Countersunk

Stainless Steel

Satin

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Point fixtures Catalogue number:

Technical data:

Cat. no.

44 mm

Bore

see hole patterns

SW 10

89 - 95

Ø40 +0,1 -0 Ø40 +0,1 -0

70 mm

Thread length**

Hole pattern VSG:

10 - 21,52 mm

Diameter

11°

middle of pane

Glass thickness

11°

flexible

Force initiation

Thread length 44

VA mirrored

Retaining pin

M 14x1,5

Version

10 - 21,52

9

Ø70

*Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

Hole pattern ESG:

K 17 001 5 65

e - power

**Other thread lengths available on request!

Technical data:

Cat. no.

Ø70

middle of pane

Glass thickness

10 - 21,52 mm

Diameter

70 mm

Thread length**

75 mm

Bore

see hole patterns

Hole pattern VSG:

flexible

Force initiation

SW 10

130 - 136,5

Ø40 +0,1 -0

11°

VA mirrored

Retaining pin

11°

Version

M 14x1,5

*Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

Thread length 75

10 - 21,52

Hole pattern ESG:

9

K 17 002 5 65

Ø40 +0,1 -0

Catalogue number:

e - power

**Other thread lengths available on request!

Catalogue number:

Technical data:

Cat. no. K 17 005 5 65

35 mm

Bore

see hole patterns

Ø35 +0,5 -0

35

Ø35 +0,5 -0

80 mm

Thread length***

Hole pattern VSG:

Diameter

11°

10 - xx mm

11°

in front of the pane-middle

Glass thickness**

35

flexible

Force initiation

M 12x1,75

VA mirrored

Retaining pin

Ø30

Version

10-xx 4

8 3

Hole pattern ESG:

Ø80

*General construction supervisory approval granted!! Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

** Please state the glass thickness when placing orders! ***Other thread lengths/sizes available on request!

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

199.


Point fixtures Technical data:

Catalogue number: Cat. no. K 17 006 5 65 Ø35 +0,5 -0

3

Hole pattern ESG:

8

4 35

10-xx

Ø68

*General construction supervisory approval granted!! Scope of delivery: incl. 2 VA nuts + 2 VA flat washers Version

11°

M 12x1,75

11°

Ø35 +0,5 -0

Hole pattern VSG:

Ø30

35

VA mirrored

Retaining pin

flexible

Force initiation

in front of the pane-middle

Glass thickness**

10 - xx mm

Diameter

68 mm

Thread length***

35 mm

Bore

see hole patterns

** Please state the glass thickness when placing orders! ***Other thread lengths/sizes available on request!

Technical data:

Catalogue number: Cat. no.

90°

Ø40 +0,1 -0

Ø48 +0,1 -0 outside

Ø48 +0,1 -0

90°

Hole pattern VSG:

11°

M 14x1,5 11°

Ø40 +0,1 -0

Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

Thread length 44

SW 10

9

Ø48 Ø70 84 - 86 17,52 - 21,52

Hole pattern ESG:

outside

K 17 025 5 65

Version

VA mirrored

Retaining pin

flexible

Force initiation

middle of pane

Glass thickness

17,52 - 21,52 mm

Diameter

70 mm

Thread length*

44 mm

Bore

see hole patterns

*Other thread lengths available on request!

Technical data:

Catalogue number: Cat. no.

outside

Ø48 +0,1 -0

90°

Hole pattern ESG:

9 Thread length 75

11°

M 14x1,5 11°

Ø48 +0,1 -0

90°

Ø40 +0,1 -0

outside

Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

Hole pattern VSG:

SW 10

17,52 - 21,52

Ø48 Ø70 122 - 124,5

Ø40 +0,1 -0

K 17 026 5 65

Version

VA mirrored

Retaining pin

flexible

Force initiation

middle of pane

Glass thickness

17,52 - 21,52 mm

Diameter

70 mm

Thread length*

75 mm

Bore

see hole patterns

*Other thread lengths available on request!

200.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Point fixtures Catalogue number:

Technical data:

Cat. no.

Catalogue number:

90°

Ø39 +0,5 -0

Hole pattern ESG:

Ø44+0,5 -0

35

outside

see hole patterns

** Please state the glass thickness when placing orders! ***Other thread lengths/sizes available on request!

Ø48 +0,5 -0

35 mm

Bore

90°

80 mm

Thread length***

Hole pattern VSG:

12 - xx mm

Diameter

11°

Glass thickness**

11°

in front of the pane-middle 35

flexible

Force initiation

M 12x1,75

VA mirrored

Retaining pin

Ø30

Version

4

12-xx

Ø42 Ø80

*General construction supervisory approval granted!! Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

Ø48 +0,5 -0

outside

K 17 030 5 65

Technical data:

Cat. no.

Ø39 +0,5 -0

Ø48 +0,5 -0

Hole pattern ESG:

Ø44+0,5 -0

35

outside

see hole patterns

Ø48 +0,5 -0

35 mm

Bore

90°

68 mm

Thread length***

Hole pattern VSG:

12 - xx mm

Diameter

11°

Glass thickness**

11°

in front of the pane-middle

35

flexible

Force initiation

M 12x1,75

VA mirrored

Retaining pin

Ø30

Version

4

12-xx

Ø42 Ø68

*General construction supervisory approval granted!! Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

90°

outside

K 17 031 5 65

** Please state the glass thickness when placing orders! ***Other thread lengths/sizes available on request!

Catalogue number:

Technical data:

Cat. no.

10 - 21,52 mm

Diameter

70 mm

Thread length*

50 mm

Bore

see hole patterns

SW 10

10 - 21,52

Ø40 +0,1 -0 Ø40 +0,1 -0

middle of pane

Glass thickness

Hole pattern VSG:

fixed

Force initiation

Thread length 50

VA mirrored

Retaining pin

M 14x1,5

Version

91,5 - 96,5

9

Ø70

Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

Hole pattern ESG:

K 17 050 5 65

*Other thread lengths available on request!

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

201.


Point fixtures Technical data:

Catalogue number: Cat. no.

Ø19 +0,1 -0

Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

Ø19 +0,1 -0

Hole pattern VSG:

Ø3,5

Set screw M 10

12

10,76 - 21,52

12

Ø73 93 - 98

Hole pattern ESG:

K 17 051 5 65

Version

VA mirrored

Retaining pin

fixed

Force initiation

middle of pane

Glass thickness

10,76 - 21,52 mm

Diameter

73 mm

Thread length*

continuous

Bore

see hole patterns

*Other thread lengths available on request!

Technical data:

Catalogue number: Cat. no.

4

3

8

Hole pattern ESG:

Ø68 17

*General construction supervisory approval granted!! Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

Ø25 +0,5 -0

Hole pattern VSG:

35

Ø25

6-xx

Ø25 +0,5 -0

K 17 055 5 65

Version

VA mirrored

Retaining pin

fixed

Force initiation

middle of pane

Glass thickness**

6 - xx mm

Diameter

68 mm

Thread length***

35 mm

Bore

see hole patterns

M 12x1,75

** Please state the glass thickness when placing orders! ***Other thread lengths/sizes available on request!

Technical data:

Catalogue number: Cat. no.

Ø40 +0,1 -0

Ø48 +0,1 -0 Ø48 +0,1 -0

90°

Ø40 +0,1 -0

outside

Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

Hole pattern VSG:

SW 10

Thread length 50

9

Hole pattern ESG:

Ø48 Ø70 84,5 13,52 - 21,52

90°

outside

K 17 075 5 65

Version

VA mirrored

Retaining pin

fixed

Force initiation

middle of pane

Glass thickness

13,52 - 21,52 mm

Diameter

70 mm

Thread length*

50 mm

Bore

see hole patterns

M 14x1,5

*Other thread lengths available on request!

202.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Point fixtures Catalogue number:

Technical data:

Cat. no.

Catalogue number:

8-xx

90°

Ø39 +0,5 -0

Ø48 +0,5 -0 Ø44+0,5 -0

outside

Ø48 +0,5 -0

see hole patterns

** Please state the glass thickness when placing orders! ***Other thread lengths/sizes available on request!

90°

35 mm

Bore

Hole pattern VSG:

68 mm

Thread length***

4

8 - xx mm

Diameter

17

middle of pane

Glass thickness**

35

fixed

Force initiation

M 12x1,75

VA mirrored

Retaining pin

Ø25

Version

Ø42 Ø68

*General construction supervisory approval granted!! Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

Hole pattern ESG:

outside

K 17 080 5 65

Technical data:

Cat. no. K 17 100 5 65

54 mm

Thread length*

44 mm

Bore

see hole patterns

Ø19 +0,1 -0 Ø19 +0,1 -0

6 - 12 mm

Diameter

Hole pattern VSG:

Glass thickness

11°

in front of the pane-middle

11°

flexible

Force initiation

Hole pattern ESG:

SW 10 Thread length 44

VA mirrored

Retaining pin

M 12x1,5

Version

95 - 103,5

6 - 12

7

Ø54

Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

*Other thread lengths available on request!

Catalogue number:

Technical data:

Cat. no. K 17 101 5 65

12 - 17,52 mm

Diameter

54 mm

Thread length*

44 mm

Bore

see hole patterns

Hole pattern ESG:

Ø19 +0,1 -0 Ø19 +0,1 -0

Glass thickness

11°

in front of the pane-middle

11°

flexible

Force initiation

Hole pattern VSG:

SW 10 Thread length 44

12 - 17,52

VA mirrored

Retaining pin

M 12x1,5

Version

101 - 107

7

Ø54

Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

*Other thread lengths available on request!

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

203.


Point fixtures Technical data:

Catalogue number: Cat. no. K 17 102 5 65 Ø19 +0,1 -0

Hole pattern ESG:

SW 10

M 12x1,5

11°

11°

Hole pattern VSG:

Thread length 44

Version

Ø19 +0,1 -0

17,52 - 21,52

106 - 111

7

Ø54

Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

VA mirrored

Retaining pin

flexible

Force initiation

in front of the pane-middle

Glass thickness

17,52 - 21,52 mm

Diameter

54 mm

Thread length*

44 mm

Bore

see hole patterns

*Other thread lengths available on request!

Technical data:

Catalogue number: Cat. no.

Ø52 4

Ø25 +0,5 -0

*General construction supervisory approval granted!! Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

35

10-xx

3

8

Hole pattern ESG:

K 17 105 5 65

Version

11°

M 12x1,75 11°

Ø25 +0,5 -0

Hole pattern VSG:

Ø30

35

VA mirrored

Retaining pin

flexible

Force initiation

in front of the pane-middle

Glass thickness**

10 - xx mm

Diameter

52 mm

Thread length***

35 mm

Bore

see hole patterns

** Please state the glass thickness when placing orders! ***Other thread lengths/sizes available on request!

Technical data:

Catalogue number:

Thread length 44

90°

7 SW 10

90°

Ø27 +0,1 -0

11°

11°

Ø19 +0,1 -0

Version Ø19 +0,1 -0

outside

Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

Hole pattern VSG:

8 - 10

Hole pattern ESG:

Ø54 Ø27 90,5 - 92,5

K 17 125 5 65

Ø27 +0,1 -0

outside

Cat. no.

VA mirrored

Retaining pin

flexible

Force initiation

in front of the pane-middle

Glass thickness

8 - 10 mm

Diameter

54 mm

Thread length*

44 mm

Bore

see hole patterns

M 12x1,5

*Other thread lengths available on request!

204.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Point fixtures Catalogue number:

Technical data:

Cat. no.

Catalogue number:

90°

Ø19 +0,1 -0 Ø19 +0,1 -0

7

10 - 13,52

SW 10

outside

see hole patterns

*Other thread lengths available on request!

Ø27 +0,1 -0

44 mm

Bore

90°

54 mm

Thread length*

Hole pattern VSG:

10 - 13,52 mm

Diameter

11°

Glass thickness

11°

in front of the pane-middle

Thread length 44

flexible

Force initiation

92 - 96

VA mirrored

Retaining pin

M 12x1,5

Version

Hole pattern ESG:

Ø54 Ø27

Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

Ø27 +0,1 -0

outside

K 17 126 5 65

Technical data:

Cat. no.

90°

Ø19 +0,1 -0 Ø19 +0,1 -0

7

13,52 - 17,52

SW 10

outside

see hole patterns

Ø27 +0,1 -0

44 mm

Bore

90°

54 mm

Thread length*

Hole pattern VSG:

13,52 - 17,52 mm

Diameter

11°

Glass thickness

11°

in front of the pane-middle

Thread length 44

flexible

Force initiation

M 12x1,5

VA mirrored

Retaining pin

96 - 100

Ø27

Version

Hole pattern ESG:

Ø54

Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

Ø27 +0,1 -0

outside

K 17 127 5 65

*Other thread lengths available on request!

Catalogue number:

Technical data:

Cat. no.

Ø19 +0,1 -0 Ø19 +0,1 -0

Hole pattern ESG:

7 SW 10

outside

see hole patterns

Ø27 +0,1 -0

44 mm

Bore

Ø27 +0,1 -0

54 mm

Thread length*

90°

17,52 - 21,52 mm

Diameter

Hole pattern VSG:

Glass thickness

11°

in front of the pane-middle

11°

flexible

Force initiation

Thread length 44

VA mirrored

Retaining pin

M 12x1,5

Version

100 - 104 17,52 - 21,52

Ø27 Ø54

Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

90°

outside

K 17 128 5 65

*Other thread lengths available on request!

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

205.


Point fixtures Technical data:

Catalogue number: Cat. no.

outside

Ø52

90°

Ø32 +0,5 -0

Hole pattern ESG:

12-xx

Ø26

*General construction supervisory approval granted!! Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

35

4

Ø23 +0,5 -0

K 17 130 5 65

11°

Ø32 +0,5 -0

M 12x1,75

11°

90°

Hole pattern VSG:

outside

Ø30

35

Ø28 +0,5 -0

Version

VA mirrored

Retaining pin

flexible

Force initiation

in front of the pane-middle

Glass thickness**

12 - xx mm

Diameter

52 mm

Thread length***

35 mm

Bore

see hole patterns

** Please state the glass thickness when placing orders! ***Other thread lengths/sizes available on request!

Technical data:

Catalogue number: Cat. no.

SW 10 Thread length 44

Ø19 +0,1 -0

Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

Hole pattern VSG:

Version Ø19 +0,1 -0

8 - 12,76

7

Ø54 100 - 102,5

Hole pattern ESG:

K 17 150 5 65

VA mirrored

Retaining pin

fixed

Force initiation

in front of the pane-middle

Glass thickness

8 - 12,76 mm

Diameter

54 mm

Thread length*

44 mm

Bore

see hole patterns

M 12x1,5

*Other thread lengths available on request!

Technical data:

Catalogue number: Cat. no. K 17 151 5 65

Ø19 +0,1 -0

Hole pattern ESG:

SW 10

Ø19 +0,1 -0

Hole pattern VSG:

Version Thread length 44

12,76 - 17,52

98 - 105,5

7

Ø54 M 12x1,5

206.

Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

VA mirrored

Retaining pin

fixed

Force initiation

in front of the pane-middle

Glass thickness

12,76 - 17,52 mm

Diameter

54 mm

Thread length*

44 mm

Bore

see hole patterns

*Other thread lengths available on request!

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Point fixtures Catalogue number:

Technical data:

Cat. no. K 17 152 5 65

Glass thickness

17,52 - 21,52 mm

Diameter

54 mm

Thread length*

44 mm

Bore

see hole patterns

Ø19 +0,1 -0

Hole pattern ESG:

SW 10

Ø19 +0,1 -0

in front of the pane-middle

Hole pattern VSG:

fixed

Force initiation

Thread length 44

VA mirrored

Retaining pin

M 12x1,5

Version

105,5 - 109,5 17,52 - 21,52

7

Ø54

Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

*Other thread lengths available on request!

Catalogue number:

Technical data:

Cat. no.

middle of pane

Glass thickness

10,76 - 21,52 mm

Diameter

54 mm

Thread length*

continuous

Bore

see hole patterns

Ø19 +0,1 -0

12 Ø3,5

Ø19 +0,1 -0

fixed

Force initiation

Hole pattern VSG:

VA mirrored

Retaining pin

Set screw M 10

Version

93 - 98 10,76 - 21,52

12

Ø54

Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

Hole pattern ESG:

K 17 153 5 65

*Other thread lengths available on request!

Catalogue number:

Technical data:

Cat. no.

52 mm

Thread length***

35 mm

Bore

see hole patterns

8 17

Hole pattern ESG:

3

4

Ø25 +0,5 -0

6 - xx mm

Diameter

Hole pattern VSG:

middle of pane

Glass thickness**

35

fixed

Force initiation

M 12x1,75

VA mirrored

Retaining pin

Ø25

Version

6-xx

Ø52

*General construction supervisory approval granted!! Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

Ø25 +0,5 -0

K 17 155 5 65

** Please state the glass thickness when placing orders! ***Other thread lengths/sizes available on request!

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

207.


Point fixtures Technical data:

Catalogue number: Cat. no.

7 SW 10

90°

Ø19 +0,1 -0

Ø27 +0,1 -0

Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

Ø19 +0,1 -0

Ø27 +0,1 -0

Hole pattern VSG:

outside

Thread length 44

Version

90°

8 - 10

Ø27 Ø54 89 - 91

Hole pattern ESG:

outside

K 17 175 5 65

VA mirrored

Retaining pin

fixed

Force initiation

in front of the pane-middle

Glass thickness

8 - 10 mm

Diameter

54 mm

Thread length*

44 mm

Bore

see hole patterns

M 12x1,5

*Other thread lengths available on request!

Technical data:

Catalogue number:

SW 10

7

90°

Ø19 +0,1 -0

Ø27

outside

Ø27 +0,1 -0

90°

Version Ø19 +0,1 -0

Thread length 44

Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

Hole pattern VSG:

10 - 13,52

Hole pattern ESG:

Ø54 90,5 - 94,5

K 17 176 5 65

Ø27 +0,1 -0

outside

Cat. no.

VA mirrored

Retaining pin

fixed

Force initiation

in front of the pane-middle

Glass thickness

10 - 13,52 mm

Diameter

54 mm

Thread length*

44 mm

Bore

see hole patterns

M 12x1,5

*Other thread lengths available on request!

Technical data:

Catalogue number: Cat. no.

Ø19 +0,1 -0

Ø27 +0,1 -0

90°

SW 10

7

Ø27 Ø54

Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

Ø27 +0,1 -0

90°

Ø19 +0,1 -0

outside

Version

Hole pattern VSG:

Thread length 44

98,5 - 102,5 13,52 - 21,52

Hole pattern ESG:

outside

K 17 177 5 65

VA mirrored

Retaining pin

fixed

Force initiation

in front of the pane-middle

Glass thickness

13,52 - 21,52 mm

Diameter

54 mm

Thread length*

44 mm

Bore

see hole patterns

M 12x1,5

*Other thread lengths available on request!

208.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Point fixtures Catalogue number:

Technical data:

Cat. no.

35

17

4 8-xx

Ø25

M 12x1,75

Ø26

Ø52

K 17 180 5 65

*General construction supervisory approval granted!! Scope of delivery: incl. 2 VA nuts + 2 VA flat washers Version

VA mirrored

Retaining pin

fixed

Force initiation

middle of pane

Glass thickness**

8 - xx mm

Diameter

52 mm

Thread length***

35 mm

Bore

see hole patterns

Hole pattern VSG:

Hole pattern ESG:

90°

90°

Ø32 +0,5 -0

Ø32 +0,5 -0

outside

outside

Ø23 +0,5 -0

Ø28 +0,5 -0

** Please state the glass thickness when placing orders! ***Other thread lengths/sizes available on request!

Catalogue number:

Technical data: 35

Cat. no.

17

4 8-xx

Ø45

Ø25

M 12x1,75

Ø26

K 17 181 5 65

*General construction supervisory approval granted!! Scope of delivery: incl. 2 VA nuts + 2 VA flat washers Version

VA mirrored

Retaining pin

fixed

Force initiation

middle of pane

Glass thickness**

8 - xx mm

Diameter

45 mm

Thread length***

35 mm

Bore

see hole patterns

Hole pattern VSG:

Hole pattern ESG:

90°

90°

Ø32 +0,5 -0

Ø32 +0,5 -0

outside

outside

Ø23 +0,5 -0

Ø28 +0,5 -0

** Please state the glass thickness when placing orders! ***Other thread lengths/sizes available on request!

Catalogue number:

Technical data:

Cat. no. K 17 185 5 65 35

35

10-xx 4

3 8

Ø45

11°

Version

Ø30

*General construction supervisory approval granted!! Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

M 12x1,75

11°

VA mirrored

Retaining pin

flexible

Force initiation

in front of the pane-middle

Glass thickness**

10 - xx mm

Diameter

45 mm

Thread length***

35 mm

Bore

see hole patterns

Hole pattern VSG:

Ø25 +0,5 -0

Hole pattern ESG:

Ø25 +0,5 -0

** Please state the glass thickness when placing orders! ***Other thread lengths/sizes available on request!

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

209.


Point fixtures Technical data:

Catalogue number:

35

35

Cat. no.

12-xx

4

Ø26

11°

Ø30

M 12x1,75

11°

Ø45

K 17 190 5 65

*General construction supervisory approval granted!! Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

Hole pattern VSG:

Version

Hole pattern ESG:

90°

90°

Ø32 +0,5 -0

Ø32 +0,5 -0

outside

outside

Ø23 +0,5 -0

Ø28 +0,5 -0

VA mirrored

Retaining pin

flexible

Force initiation

in front of the pane-middle

Glass thickness**

12 - xx mm

Diameter

45 mm

Thread length***

35 mm

Bore

see hole patterns

** Please state the glass thickness when placing orders! ***Other thread lengths/sizes available on request!

Technical data:

Catalogue number: Cat. no.

Ø70 Ø26 +0,1 -0

Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

Thread length 75

11°

11°

Ø26 +0,1 -0

Version

Hole pattern VSG:

SW 10

148,5 - 158,5

11,52 - 21,52

Hole pattern ESG:

12

K 17 200 5 65

VA mirrored

Retaining pin

flexible

Force initiation

in front of the pane-middle

Glass thickness

11,52 - 21,52 mm

Diameter

70 mm

Thread length*

75 mm

Bore

see hole patterns

*Other thread lengths available on request!

M 14x1,5

Technical data:

Catalogue number: Cat. no. K 17 225 5 65

Ø70 Ø26 +0,1 -0

Ø34 +0,1 -0 Ø34 +0,1 -0

90°

Ø26 +0,1 -0

Hole pattern VSG:

outside

Version

11°

11°

M 14x1,5

210.

90°

Thread length 75

SW 10

143 - 147

17,52 - 21,52

Hole pattern ESG:

outside

Ø34

Scope of delivery: incl. 2 VA nuts + 2 VA flat washers

VA mirrored

Retaining pin

flexible

Force initiation

in front of the pane-middle

Glass thickness

17,52 - 21,52 mm

Diameter

70 mm

Thread length*

75 mm

Bore

see hole patterns

*Other thread lengths available on request!

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Point fixtures Catalogue number:

Technical data:

Cat. no. K 17 255 5 65

46 146

Ø52 46

57

Force initiation

middle of pane

Glass thickness*

6 - xx mm

Diameter

52 mm

Bore

see hole patterns

146 Hole pattern VSG:

fixed

+0,5 Ø25 -0

Retaining pin

8 3 6-xx 3 15 Ø12 Hole pattern ESG:

VA mirrored

+0,5 Ø25 -0

Version

*Please state the glass thickness when placing orders!

Catalogue number:

Technical data:

Cat. no. K 17 256 5 65

46 146

Ø26 Ø52 46

57

90°

Hole pattern VSG:

Catalogue number:

outside

see hole patterns

*Please state the glass thickness when placing orders!

+0,5 Ø32 -0

52 mm

Bore

+0,5 Ø28 -0

8 - xx mm

Diameter

Hole pattern ESG:

middle of pane

Glass thickness*

90°

Force initiation

146

8-xx 3 15 Ø12

outside

fixed +0,5 Ø32 -0

VA mirrored

Retaining pin

+0,5 Ø23 -0

Version

Technical data:

Cat. no. K 17 265 5 65

Ø52

85,5

32,5

32,5

8 3 6-xx 3 10 Ø20

middle of pane

Glass thickness*

6 - xx mm

Diameter

52 mm

Bore

see hole patterns

+0,5 Ø25 -0

fixed

Force initiation

85,5

Hole pattern VSG:

Retaining pin

Hole pattern ESG:

VA mirrored

+0,5 Ø25 -0

Version

*Please state the glass thickness when placing orders!

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

211.


Point fixtures Technical data:

Catalogue number: Cat. no. K 17 266 5 65

85,5

32,5 Ø52

Ø26 32,5

8-xx 3 10 Ø20

85,5

90°

outside

outside

+0,5 Ø28 -0

Hole pattern VSG:

+0,5 Ø32 -0

90°

Hole pattern ESG:

+0,5 Ø32 -0 +0,5 Ø23 -0

Version

VA mirrored

Retaining pin

fixed

Force initiation

middle of pane

Glass thickness*

8 - xx mm

Diameter

52 mm

Bore

see hole patterns

*Please state the glass thickness when placing orders!

Technical data:

Catalogue number:

8 6-xx 3 10 Ø20

Cat. no.

Ø25 +0,5 -0

~10

Ø25 +0,5 -0

33

Ø52

Hole pattern VSG:

M12

80

235

80

M12

Hole pattern ESG:

Ø52

33

K 17 275 5 65

Version

VA mirrored

Retaining pin

fixed

Force initiation

middle of pane

Glass thickness*

6 - xx mm

Diameter

52 mm

Bore

see hole patterns

*Please state the glass thickness when placing orders!

8 6-xx 3 10 Ø20

Technical data:

Catalogue number: Cat. no.

8-xx 3 10 Ø20 90°

Ø23 +0,5 -0 Ø28 +0,5 -0

outside

Ø32 +0,5 -0

90°

Hole pattern VSG:

Ø26 Ø52

M12 33

8-xx 3 10 Ø20

212.

Ø32 +0,5 -0

Hole pattern ESG:

~10 80

235

80

M12

Ø26 Ø52

33

outside

K 17 276 5 65

Version

VA mirrored

Retaining pin

fixed

Force initiation

middle of pane

Glass thickness*

8 - xx mm

Diameter

52 mm

Bore

see hole patterns

*Please state the glass thickness when placing orders!

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Point fixtures Catalogue number:

Technical data:

Cat. no. K 17 285 5 65 53 41

dependent on glass thickness

±2 ,5 10 0

Ø52 ±2 ,5

3 8 6-xx

middle of pane

Glass thickness*

6 - xx mm

Diameter

52 mm

Bore

see hole patterns

Hole pattern VSG:

fixed

Force initiation

41 53

+0,5 Ø25 -0

Retaining pin

3

Hole pattern ESG:

VA mirrored

+0,5 Ø25 -0

Version

*Please state the glass thickness when placing orders!

Catalogue number:

53 41

K 17 286 5 65

dependent on glass thickness

Cat. no.

Technical data:

+2 ,5

-

1 00

Ø26 Ø52

+2 ,5

-

8-xx

90°

Hole pattern VSG:

outside

see hole patterns

*Please state the glass thickness when placing orders!

+0,5 Ø32 -0

52 mm

Bore

+0,5 Ø28 -0

8 - xx mm

Diameter

90°

middle of pane

Glass thickness*

41 53

Hole pattern ESG:

fixed

Force initiation

outside

Retaining pin

+0,5 Ø32 -0

VA mirrored

+0,5 Ø23 -0

Version

3

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

213.


Sheds light on the darkness.

NEW

With

punctum ® lux , the companies

INSTA

and

SWS have Using

managed to turn a vision into a reality together . the point-fixture integrated

LED

technology, complete

glass façades are illuminated in any conceivable colours .

Setting

lighting accents

punctum ® lux gives builders and architects a completely new deployment of the style element of light.

Via

illuminated fa-

çades , buildings are transformed into luminous elements and stand apart in the nightly urban silhouette , set accents and attract attention .

Alternating

light scenarios facilitate

staging moods .

214.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Sophisticated and intelligently innovative. The

punctum ® lux point fixture is a technical masterpiece .

Connecting

the hol-

ding function with the façade illumination , possible for the rst time only after extensive development, stands in the centre of attention and convinces with many details .

Low-volt technology The illuminated, entire

glass façades were a great challenge even

from thesafety aspects .

Thanks to punctum® lux low-volt technology, – as compared with conventional systems – have now been considerably reduced. Additional advances are the high maintenance and energy efficiencies . planning and installation

16,7 million colours In connection with the instalight ® LEDTRIX module, the colours of light in the RGB spectrum (16,7 million colours ) can be freely selected. On top of that, by linking to the building engineering via a BUS system, comfortable control including programming impressive light scenarios is now also feasible . Corporate architecture Imprinting the glass makes the LED-light radiated into the glass surface by punctum ® lux visible . This print can be designed so that light patterns arise , which , for example , let a corporate logo appear in the Corporate Design colours – additional room for creativity emerges for architects and designers .

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

215.


216.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


K

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

217.


K

218.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


K K

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

219.


K K

220.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


K

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

221.


K

222.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


K

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

223.


Notes

224.

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


SPIDERS


Spider 15mm

Technical data:

17

30 50

48mm 28

Catalogue number: Cat. no.

Description

Material

Surface style

KSP001

Four Way

Stainless Steel

Satin

250mm

48

Spider Technical data:

50 15

30 28

48

17

Catalogue number: Cat. no.

Description

Material

Surface style

KSP002

3 Way

Stainless Steel

Satin

Spider Technical data:

50 15

30 28 17

Catalogue number:

226.

Cat. no.

Description

Material

Surface style

KSP003

90 Degree

Stainless Steel

Satin

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie

48


Spider

176.8mm

Technical data:

Catalogue number: Cat. no.

Description

Material

Surface style

KSP004

One Way

Stainless Steel

Satin

Spider Technical data:

50 30

15

28

48

17

Catalogue number: Cat. no.

Description

Material

Surface style

KSP005

Two Way

Stainless Steel

Satin

Spider Technical data:

Catalogue number: Cat. no.

Description

Material

Surface style

KSP006

One Way

Stainless Steel

Satin

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

227.


Spider Technical data:

Size (mm) l

H

A

B

C

E

F

G

250

95

40

12

65

80

15

65

Catalogue number: Cat. no.

Description

Material

Surface style

KSP007

Two Way

Stainless Steel

Satin

Spider Technical data:

Size (mm) l

H

A

B

C

E

F

G

250

95

40

12

65

80

15

65

Catalogue number: Cat. no.

Description

Material

Surface style

KSP008

One Way

Stainless Steel

Satin

Spider Technical data:

Catalogue number:

228.

Cat. no.

Description

Material

Surface style

KSP009

One Way Left

Stainless Steel

Satin

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Spider Technical data:

Catalogue number: Cat. no.

Description

Material

Surface style

KSP010

One Way Right

Stainless Steel

Satin

Spider Technical data:

Catalogue number: Cat. no.

Description

Material

Surface style

KSP011

Two Way

Stainless Steel

Satin

Spider Technical data:

Catalogue number: Cat. no.

Description

Material

Surface style

KSP012

One Way 180 Degree

Stainless Steel

Satin

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

229.


SF-PT12

Spider

SF-PT12

Technical data:

SF-PZ

SF-PZ

SF-PT14 16

SF-PT12

SF-PZ

Catalogue number: Cat. no.

Description

Material

Surface style

KSP013

M14 Countersunk Bolt

Stainless Steel

Satin

Spider Technical data:

SF-PZ

SF-PT14 16

Catalogue number: Cat. no.

Description

Material

Surface style

KSP014

M14 Flat Bolt

Stainless Steel

Satin

SF-PT14 16

Spider

Technical data:

Catalogue number:

230.

Cat. no.

Description

Material

Surface style

KSP015

Countersunk

Stainless Steel

Satin

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Spider Technical data:

Catalogue number: Cat. no.

Description

Material

Surface style

KSP016

Fin Bolt

Stainless Steel

Satin

Spider Technical data:

5

Ø50

30

Mount for bearing

8 100

Ø1

100 Ø60

Catalogue number:

Support for cylinder head bolt DIN 6912 M 20

40

Cat. no.

Designation

Material

K 17 300 5 65

single-armed spider 45°

Stainless Steel (VA) Set screw (VA)

Surface style mirrored

Spider Technical data: Mount for bearing Ø60 Ø18

Ø50

30

100

Catalogue number: Cat. no.

Designation

Material

K 17 301 5 65

single-armed spider 90°

Stainless Steel (VA) Set screw (VA)

5

40

Support for cylinder head bolt DIN 6912 M 20

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

Surface style mirrored

231.


Spider Technical data: 40 30

100

5

200

Ø60

Mount for bearing

100

8

Ø1

Support for cylinder head bolt DIN 6912 M 20

Ø50

Catalogue number: Cat. no.

Designation

Material

Surface style

PU

K 17 302 5 65

double-armed spider 90°

Stainless Steel (VA) Set screw (VA)

mirrored

1 each

Spider Technical data:

Mount for bearing Ø60 Ø18

Ø50

100

100

40 30

5

Support for cylinder head bolt DIN 6912 M 20

Catalogue number:

232.

Cat. no.

Designation

Material

Surface style

PU

K 17 303 5 65

double-armed spider 180°

Stainless Steel (VA) Set screw (VA)

mirrored

1 each

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Spider Technical data: 40 30

200 100

5

Mount for bearing 8

200

100

Ø1

Support for cylinder head bolt DIN 6912 M 20

Ø60

Mount for bearing Ø50

Catalogue number: Cat. no.

Designation

Material

Surface style

PU

17 304 5 65K

three-armed spider

Stainless Steel (VA) Set screw (VA)

mirrored

1 each

Spider Technical data: 200

40 30

100

5

Mount for bearing

8

200

100

Ø1

100

200

Support for cylinder head bolt DIN 6912 M 20 Ø60

Mount for bearing 100

Ø50 200

Catalogue number: Cat. no.

Designation

Material

Surface style

PU

K 17 305 5 65

four-armed spider

Stainless Steel (VA) Set screw (VA)

mirrored

1 each

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

233.


Fixed bearing Technical data: Ø15

Catalogue number: Cat. no.

Designation

Material

Surface style

PU

K 17 310 5 65

fixed bearing

Stainless Steel (VA)

mirrored

1 each

Movable bearing Technical data: Ø20

Catalogue number: Cat. no.

Designation

Material

Surface style

PU

K 17 311 5 65

movable bearing

Stainless Steel (VA)

mirrored

1 each

Vertical bearing Technical data:

15

LL 26

Catalogue number:

234.

Cat. no.

Designation

Material

Surface style

PU

K 17 312 5 65

vertical bearing

Stainless Steel (VA)

mirrored

1 each

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Set collar / Sliding pane Technical data: Sliding pane

Ø49 Ø15

M6

Ø50

M

14

x1

,5

Set collar

10

t = 1,5

PU

Catalogue number: Cat. no.

Designation

Material

Surface style

K 17 350 5 65

Set collar

Stainless Steel (VA)

mirrored

K 17 355 6 25

Sliding pane

Plastic (PTFE)

white

1 each

Functionality / Storage engineering width

width 80-120

80-120

80-120

80-120

80-120

80-120

hight

hight

80-120

80-120

width 80-120 80-120

80-120

Fixed position in direction of X or Y-axis

Fixed bearing

Vertical bearing hight

-x

x

Degrees of freedom in direction of X-axis

x

Degrees of freedom in direction of X or Y-axis

y Movable bearing 80-120

-x -y

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

235.


Vacuum Glass Lifters P11104DCO - 320 KG The P1104DCO vacuum lifter also features Powr-Grip's Dual Vacuum System & 180° manual rotation The Dual Vacuum System features two vacuum line circuits, allowing the vacuum lifter to maintain the vacuum level for one circuit even if an unexpected vacuum loss occurs in the other one. In addition, it features audible and visible alarms that warn the operator whenever the vacuum level is not sufficient for lifting the maximum load weight. Complies with CE Standard EN 13155. Load Movement: Manual rotation, 180° edgewise, with automatic locking in three positions. Assisted manual tilt, 90° between upright and flat Standard Features: Low vacuum warning light, On-board battery and charger, Battery energy gauge, Vacuum gauge, Vacuum reserve tank.

Code

B0071

7211 DS2 - 600 KG The battery-powered Kombi 7211-DS2 allows you to move loads of up to 600 kg. The load can be turned through +/- 90 and or pivoted through 90 degrees. Turning and tilting are carried out manually. There are locking points every 15 degrees throughout the tilting range. The Dual Vacuum System features two vacuum line circuits, allowing the vacuum lifter to maintain the vacuum level for one circuit even if an unexpected vacuum loss occurs in the other one. In addition, it features audible and visible alarms that warn the operator whenever the vacuum level is not sufficient for lifting the maximum load weight. Complies with CE Standard EN 13155. Standard Features: Low vacuum warning light, On-board battery and charger, Battery energy gauge, Vacuum gauge, Vacuum reserve tank.

Code

B0068

7211 DS3 - 1000 KG The battery-powered Kombi 7211-DS3 allows you to move loads of up to 1000 kg. The load can be turned through +/- 360 and or pivoted through 90 degrees. Turning and tilting are carried out manually. There are locking points every 3 degrees throughout the tilting range. An optional electric or manual hydraulic drive is available for the tilting movement. The unit has six extensions ensuring that its size can be very flexibly adjusted to match the size of the transported material. The Dual Vacuum System features two vacuum line circuits, allowing the vacuum lifter to maintain the vacuum level for one circuit even if an unexpected vacuum loss occurs in the other one. In addition, it features audible and visible alarms that warn the operator whenever the vacuum level is not sufficient for lifting the maximum load weight. Complies with CE Standard EN 13155. Standard Features: Low vacuum warning light, On-board battery and charger, Battery energy gauge, Vacuum gauge, Vacuum reserve tank.

Code 236.

B0069

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


RAIL BRACKETS


Glass To Handrail Bracket

Technical data:

Catalogue number: Cat. no. KH1101

Glass To Handrail Bracket

Technical data:

Material/ Version

Stainless Steel SUS 304

Glass thickness

15-19 mm

Diameter

40 mm

Bore

16mm

Catalogue number: Cat. no. KH1113

Wall To Handrail Bracket

Technical data:

Material/ Version

Stainless Steel SUS 304

Glass thickness

15-19 mm

Diameter

40 mm

Bore

16mm

Catalogue number: Cat. no. KH1101W

Wall To Handrail Bracket

Technical data:

Material/ Version

Stainless Steel SUS 304

Diameter

62 mm

Catalogue number: Cat. no. KH1113W

238.

Material/ Version

Stainless Steel SUS 304

Diameter

62 mm

From R.O.I. Ph: 0505 45125 • Free Fax: 1800 200 147 • Web: www.glassparts.ie


Catalogue number:

Technical data: 55

Cat. no.

35 5

Ø16 Ø8,5

17,5 15

K 17 400 5 65

120 - 130

35

10,76 - 21,52

Ø54

12

Material/ Version

Stainless Steel (VA) mirrored

10,76 - 21,52 mm

Diameter

54 mm

Bore

see hole pattern

Catalogue number:

Hole pattern VSG:

Glass thickness

+0,1 Ø19 -0

Stud/ Installation position

ETB

TRaV konform

ETB

TRaV konform

ETB

TRaV konform

geprüft !

Technical data: 55

Cat. no.

R 21,2

K 17 401 5 65

30 15

Ø16 Ø8,5 9

5 120 - 130

35

10,76 - 21,52

Ø54

12

Material/ Version

Stainless Steel (VA) mirrored

R = 21,2 mm*

Glass thickness

10,76 - 21,52 mm

Diameter

54 mm

Bore

see hole pattern

Catalogue number:

Hole pattern VSG:

Radius

+0,1 Ø19 -0

Stud/ Installation position

geprüft !

Technical data:

Cat. no. K 17 402 5 65 35

10,76 - 21,52 5 Ø8

,5

Ø16

25

30

290 - 310

15

55

Ø54

12

Stainless Steel (VA) mirrored

Glass thickness

10,76 - 21,52 mm

Diameter

54 mm

Bore

see hole pattern

+0,1 Ø19 -0

Stud/ Installation position

Hole pattern VSG:

Material/ Version

geprüft !

INTL. Ph: +353 505 45125 • Fax: +353 505 45345 • Web: www.glassparts.co.uk

239.


Technical data:

Catalogue number:

55

15 5

25

Cat. no.

30

K 17 403 5 65 Ø16

,5 Ø8 145 - 155

35

10,76 - 21,52

Ø54

12

Material/ Version Hole pattern VSG:

+0,1 Ø19 -0

ETB

geprüft !

Stainless Steel (VA) mirrored

Stud/ Installation position

TRaV konform Technical data:

Glass thickness

10,76 - 21,52 mm

Diameter

54 mm

Bore

see hole pattern

Catalogue number: Cat. no. K 17 404 5 65

35

10,76 - 21,52

55

R21

290 - 310

9

,2

5

Ø16

,5

30

Ø8

25

Ø54

Material/ Version

12

geprüft !

Hole pattern VSG:

+0,1 Ø19 -0

ETB

Stainless Steel (VA) mirrored

Stud/ Installation position

TRaV konform Technical data:

Radius

R = 21,2 mm*

Glass thickness

10,76 - 21,52 mm

Diameter

54 mm

Bore

see hole pattern

Catalogue number:

55 25

9

5

Cat. no.

30

Ø8

K 17 405 5 65

R2 1,2

145 - 155

35

Ø16

,5

10,76 - 21,52

Ø54

12

Material/ Version

geprüft !

240.

TRaV konform

Hole pattern VSG:

+0,1 Ø19 -0

ETB

Stainless Steel (VA) mirrored

Stud/