Page 1

C-Series Guaranteed protection for chilled products.

• An affordable quality solution range • New user-friendly In-cab Controller • Minimum maintenance cost • A model available for every truck size • Ultra Slim evaporators


The complete product range for chilled applications. The C-series from Thermo King has been developed to provide a complete product range for chilled applications. There is a model available for every truck size, but the same compact condenser is used. The units have been designed with a temperature preset.

The lowest maintenance cost

Suitable for chilled applications

24/7

In the factory, the units are preset at 3°C, but this may be changed to a value between 0°C and 22°C as suits the customer’s application. The system design is uncomplicated with a

24 hour assistance from the best worldwide dealer network

minimum of connections. This leads to a shorter installation time and lower maintenance costs. There is also the reassurance from the world-wide service network. The multi lingual

C-Series

Thermo Assistance service is available 24 hours-a-day, 7 days-a-week. Another good reason to choose Thermo King’s C-Series.

Value through technology Ultra Slim Ceiling mounted evaporators for increased loadspace

• •

2

Evaporator fan runs continuously to ensure product quality

Built and backed by the world leader in transport temperature control systems

A model available for every truck size

• •

Digital In-cab controller with simple on-off control and temperature preset

• •

Large range of approved kits for trouble-free compressor operation

Uncomplicated system with minimum of connections and installation time

3


789 (31.1)

Specifications

200 (7.9)

C-Series Range

500 (19.7)

Defrost

The C-Series Thermo King refrigeration units are cooling systems with vehicle engine driven compressors designed for fresh applications on small truck and vans.

• Evaporator fans run continuously during “compressor off” cycle

• Condenser • Evaporator ES 100C, ES 200C, ES 300C depending on the model • Engine driven compressor • Installation kit • In-cab control box

Refrigerant • HFC R-134a • Chlorine - Zero • Refrigerant charge C-100 0.62kg C-200 0.95kg C-300 1.4kg

C-Series 52 (2) 108 (4.3) 130 (5.2)

Evaporator fans performance Evaporator fans performance at 0mm (0in) water column external static pressure: Airflow volume: ES100C: 695 m3/h (410 cu. ft/min) ES200C: 1070 m3/h (630 cu. ft/min) ES300C: 1150 m3/h (675 cu. ft/min)

187 (7.4)

C-100

16A

8A

C-200

21A

10.5A

C-300

21A

10.5A

525 (20.7)

985 (38.8)

Weights (approximate)

• Number of cylinders: 6 • Maximum recommended speed: 3,000 rpm C-100 Displacement - 82 cm3 (5 cu. in.) C-200 Displacement - 131 cm3 (8 cu. in.) C-300 Displacement - 147 cm3 (9 cu. in.)

Condenser C-Series 23 kg (50 lb) ES 300C (Ultra Slim evaporator) 18 kg (40 lb) ES 200C (Ultra Slim evaporator) 13 kg (29 lb) ES 100C (Ultra Slim evaporator) 8.5 kg (19 lb)

ES100C

C-200

R-134a

ES200C

C-300

R-134a

ES300C

C-Series selection guide

985 (38.8)

ES200C Ultra Slim evaporator

Compressor (engine driven)

C-200

C-300

133 (5.2)

24Vdc

R-134a

ES100C Ultra Slim Evaporator

• dc voltage options: 12 Vdc and 24 Vdc • Total current consumption: 12Vdc

C-100

490 (19.3)

Electric motors

C-Series

Evaporator

608 (24)

550 (21.7)

Loadspace volume (m3)

System components

4

Condenser without electric stand-by

Description

C-100

26 24 22 20 18 16 14 12 10 8 6 4 2

30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 1

2

3

4

5

6

7

8

9

16 14 12 10 8 6 4 1 3

4

5

6

7

8

Chilled compartment (k=0.7 W/m2K) ambient: 30°C/86°F, compartment: 3°C/37°F

178 (7)

2

Example:

ambient: 100°F/38°C, compartment: 37°F/3°C

ES300C Ultra Slim evaporator

2

9

1

2

3

4

5

6

7

8

30°C (86°F) maximum ambient, chilled compartment, 5 door openings per hour: C-100 suits vehicles up to 10.5m3 (370 cu.ft.).

Door openings per hour

Dimensions in millimetres (inches)

Standard Features • Constant air circulation • Automatic evaporator defrost by fan • In-cab controls with on/off switch and digital LED thermometer • Electronic thermostat with fixed setpoint

C-Series Refrigeration capacity Warranty summary

R-134a

Terms of the Thermo King Warranty are available on request. The unit and its components are warranted to be free from defects in material and workmanship

System net cooling capacity under ATP Certificates 657, M604 and M648, conditions +30ºC ambiente

from date in service according to the terms (in months)

C-100 (HFC R-134a Refrigerant) with ES 100C evap.

as specified in the Thermo King Warranty. Manufacturer

Air Return/On the road

Watts

BTU/Hr

is not responsible and will not be held liable in contract

0ºC (32ºF)

1530

5225

or tort (including strict liability and negligence) for any special, indirect or consequential damages including but not limited to injury or damage caused

Note: Specifications are subject to change without notice.

30°C ambient, European Standard

C-200 (HFC R-134a Refrigerant) with ES 200C evap. Air Return/On the road

Watts

BTU/Hr

0ºC (32ºF)

2250

7685

C-300 (HFC R-134a Refrigerant) with ES 300C evap.

to vehicles, contents or persons, by reason of

Air Return/On the road

Watts

BTU/Hr

the installation or use of any Thermo King product

0ºC (32ºF)

2800

9560

or its mechanical failure.

Digital In-cab controller with simple on-off control and temperature preset

Feature: • User friendly • Microprocessor based for higher reliability and accurate control • Set point adjustment with keypad 0°C to +22°C • Selection of the temperature scale: °C/°F • Individual relays for independent control of the loads

9

5


Features & Options

Features and Options

ThermoKare Service Solutions

C-100

C-200

C-300

LIFE COST MANAGEMENT 1

ThermoKare service contracts

DATA CAPTURE AND COMMUNICATIONS 2

TKDL data capture

CUSTOMIZATION 3

Hose Cover

4

Kit Muffler

5

Snow Cover (Also called kit deflector Small)

ThermoKare is a complete selection of service contract solutions, designed for fleets operating nationally or internationally. The contracts are designed to optimise the efficiency of your fleets, minimise operating costs and maximise the resale value of your equipment. Our tailored service contract solutions help to remove the noncore tasks from your daily business operations such as maintenance planning, scheduling, invoice interpretation and general fleet administration. The ThermoKare service contract solutions offer you everything from “administration only” to the complete “peace of mind” contract at an agreed, fixed cost. For more information about ThermoKare, please contact your Thermo King representative.

△ Option: Factory Installed   ▲ Option: Dealer Supplied

Thermo Assistance Thermo Assistance is a multilingual 24-hour telephone breakdown assistance service available throughout

00800 80 85 85 85

Europe that puts you in direct contact with an authorised Service Dealer whenever you require one.

6

7 1

2

ThermoKare ThermoKare offers a complete selection of service

Thermo King Muffler eliminates the vibration and noise in the interior cab of small vehicles. The muffler is

hence total life cost of a unit.

attached to the refrigeration system thus eliminating

standards

enhancing user comfort and ease of use.

5

Snow Covers Thermo King Snow Covers are designed to protect your Aerodynamically design snow cover prevents the

• Over 300 authorised service points

Full protection of hoses and cables on the road and full

lead to downtime and further maintenance costs

resistance under all climate adversities. Designed with

resulting in longer running times for your unit.

for Chassis Installations. No Vans)

• Blanket coverage across Europe • Open & available 24/7

buildup of snow and ice on the units fans which can

exceptional durability. User friendly installation (Only

Anywhere in Europe

unit against extreme climate conditions. The

Hose Covers

best aesthetics to promote brand image and with an

Thermo King Dealer Service Network

the vibration transfer from the unit to the driver cab

TKDL data capture • User-friendly temperature recorders • Delivery and journey printouts at the touch • Approved to EN 12830, CE Mark and IP-65

Kit Muffler

contract solutions to manage maintenance costs and

of a button

3

4

• 1300 certified technicians


Thermo King Corporation, a business of Ingersoll Rand - the world leader in creating and sustaining safe, comfortable and energy efficient environments - was founded in 1938 and manufactures transport temperature control systems for a variety of mobile applications, including trailers, truck bodies, buses, shipboard containers and railway cars. The company operates 10 manufacturing facilities and 17 parts distribution centers worldwide. Sales and service is provided by a global dealer network of 865 independently owned companies in 75 countries.

europe.thermoking.com

thermoking.com

ingersollrand.com

For further information please contact:

Ingersoll Rand Alma Court Building - Lenneke Marelaan 6, B-1932 Sint-Stevens-Woluwe, Belgium.

Š 2011 Ingersoll-Rand Company Limited TK51530-2-PL (06-2011)-EN

C-serien  

C-serien

Read more
Read more
Similar to
Popular now
Just for you