Issuu on Google+


Derby 90’s Demolition

Product Photos from 1983 d at Todd and his da

Vintage Gennie Sh ifter

s r shifter Todd’s frist truck at u o f o t r 16 the hea Denver, Co. 197 8 F-2 50 Sti ll ow in ns it today E MAD

the derby

product assembly in denver, Co.


IE ENN fax G 7 7 1-87 65-4122 t e e r 38 nt St 219 30 a y r B 0 301 er, CO 8 v Den t innovative, Street Rod, been to provide the very finest and mos The goal of Gennie Shifter has always look for a solution to his lable. In the 80’s Tom Phipps began to Hot Rod, and Kustom Car products avai matic transmission. Several car floor shift to control a modern auto own need of an original looking, old sor of what is today’s y, were greatly refined to the predeces kfull than and ed, elop dev were es prototyp mon car builder’s needs, of innovating new solutions to the com Gennie Shifter. He began the process st spoon throttles, and throttle original cut-2-fit brake cables, the fine with e-brake solutions, including the a new owner, and in e of innovation Tom began to look for cables. While always on the leading edg er. Denver, Colorado, he found his answ of Street Rodder’s ted a big stir in the small community crea ver Den to e mov the and n isitio The acqu Todd and where did he come from? across the industry… Who is this guy munity (yes we had that grew up in a small mountain com The answer is pretty simple. I am a guy hanical. Growing up in this became passionate about all things mec electricity, and indoor plumbing) and g passion. 4 wheel drive, able to go anywhere were the overridin small mountain town, trucks that were fly became an absolute the horsepower required to make them plus , tires and els whe d size r kille lift kits, red. They were a highlight local demolition derby could not be igno must have. Of course the draw of the of my youth, and thankfully, survived. es us all in the performance cted with the hot rod affliction that driv The die was cast, and I was totally infe garages before dealerships, chains, and independent for ches wren ding ben t spen was e community. Tim own, as well as for . Having completed many builds of my shop rod hot and n ratio resto own my starting When the opportunity to Shifter and its great line of products. customers, led me to believe in Gennie f, purchase Gennie Shifter presented itsel e. I knew immediately it was the right mov

, to say The last few years have been difficult by’s of the least, but like the demolition der ived. my youth, they too have been surv

w this catalog It is with great pleasure I ask you to revie , and to of our current Made in America products of choice. consider Gennie Shifter as your vendor

Todd Gold

President, Gennie Shifter

Todd in the early days before a demolition derby.

www.GennieShifter.com

11


Table of contents Commander Series Series........................................................ page 6-7 Commander Shifters.............................................................................. page 8-12 Shifters Shifter Accessories Accessories...................................................... Page 13, 14 Shifter Hand Brakes Brakes.................................................................... page 7, 15, 16 Hand Cables................................................................................. page 17-19 Cables Dipsticks............................................................................ page 20 Dipsticks Pedals................................................................................. page 21, 22 Pedals Hood Props Props...................................................................... page 23 Hood Parts Department Department..........................................................Page 26-29 Parts Shift knobs knobs...................................................................... page 30-42 Shift Q& &A A.................................................................................... page 43-45 Q Terms and and Conditions Conditions................................................. page 46-47 Terms © 2010/2013 Copyright, All rights reserved. Gennie Shifter® Products All drawings, diagrams, photos and product shown here are property of and represent the intellectual assets of Gennie Shifter.® Any use of copyrighted drawings, diagrams and photos or reproduction and/or reverse engineering of said property or assets is prohibited. Unauthorized use will be subject to prosecution in a court of law. Prices & Policies that were current and in effect at the time of printing were used for catalog creation. These items are subject to change without notice. This catalog is produced by the Gennie Shifter® Marketing department. Gennie Shifter® is not responsible for typographical errors.

11


The latest in the Lo-Stik™ line blends high quality materials with dramatic and innovative looks to produce The Gennie Commander™. The Commander Series of products are made with aluminum and coupled with highly polished features. Gennie Shifter is expanding from the world of Hot Rods to muscle cars & performance. The Commander™ Series Shift Stik, Pedals & Hand Brake are a “Must Have” for any enthusiast. The Gennie Commander Stik has been featured on West Coast Customs™ in a car built for Rusty Wallace, and multiple other automotive publications. The look, the feel, the versatility - no other company competes with Gennie.

OWN THE ENTIRE SERIES! SHIFT STIK • Polished aluminum • Shift stik available in 6, 8, 10 & 12 inch height

THROTTLE ARM ASSEMBLY • Highly polished throttle arm • 3 positions for attaching pads

THROTTLE & BRAKE PADS • 3 styles of brake and throttle pads; spear, rounded & triangular

HAND BRAKE • The latest edition to the Commander™ Series • Perfect for hot rod, muscle & performance vehicles • Designed in a traditional style of hand brakes!

Be in command with the dramatic and “Original” Commander Series by Gennie Shifter! 6

Commander series

Toll free 877-7 GENNIE

2014 catalog


1-877-7-Gennie 303-623-5789 SHIFT STICK 12”

HAND BRAKE

10”

You requested it, and Gennie Shifter has delivered! The Commander Series transmission mount E-brake. Perfect for hot rod, muscle & performance vehicles. Designed in a traditional style of hand brakes!

8” 6”

This is a prototype picture actual length will be different Part No.

Description

1200

6” Polished Aluminum Shifter

1201

6” Polished Aluminum Shifter

1202

10” Polished Aluminum Shifter

Part No.

Description

1203

12” Polished Aluminum Shifter

2001

Gennie Hand Brake - 16

2002

Gennie Hand Brake - 11

1250

Commander Brake Handle 15”

2000

Gennie Shifter Hand Brake Bracket

1251

Commander Brake Handle 12”

1252

Commander Lo-Line Floor Mount

Knob Sold Separately Part # 7201 7301

Part # 7202 7302

Part # 7200 7300

*Boot Sold Separately

Part No.

Description

7200ARM

Throttle Arm Assembly

7200

Triangular, gripped aluminum throttle pedal

7201

Rounded, gripped aluminum throttle pedal

7202

Spear, gripped aluminum throttle pedal

7300

Triangular, gripped aluminum throttle pedal

7301

Rounded, gripped aluminum throttle pedal

7302

Spear, gripped aluminum throttle pedal

2014 catalog

Any Gennie Shifter Throttle Pad will fit on this Commander Throttle Arm! Check out our full pedal section on pages 19 & 20 to see all of your options.

gennieshifter.com

Back View of Brake Pad

Commander series

7


Lo-Stick™ Imagine yourself driving down the road with a sleek all steel S3 Gennie Shifter. Imagine now you are at a Car Show minutes later and want to replace your S3 shifter with the “Big Stick”. You do not have to imagine, Gennie makes this switch possible with the Gennie Lo-Stik™. With the Gennie Lo-Stik™ you have the freedom to choose! The Lo-Stik is built with Gennie’s large and unique line of shift knobs in mind. With Lo-Stik it is a breeze to switch between any Gennie Shifter shift knob!

NEW

LO-STIK™ SIZES AVAILABLE. 6”, 8” & 10”

Lo-Stik™ is available for Ford, GM and MOPAR 1) Choose a Bracket Kit for your transmission. 2) Choose the correct Lo-Stik™ assembly 3) Choose or build a shift handle 4) Choose a shift knob

With Lo-Stik Choose from many different Shift Stiks!

FEATURES: • Neutral safety switch • Delrin bushings • Hardened Posiloc™ shift gate • 303 Stainless, High Polished

• Precision machine fit

DON’T FORGET! You can build your own stick , and utilize our brackets and Lo-Stik assembly

8

Shifters

* Gennie Shifter does not recommend any stik over 28 inches in length.

Toll free 877-7 GENNIE

2014 catalog


1-877-7-Gennie 303-623-5789

The Perfect Shifter 28”

With the Lo-Stik Shift Assembly shown below you can choose from 8 unique options from the Lo-Stik Family! 8”

10”

acket Kit Lo-Stik ™ Mounting Br

23” Swan 16”

12”

6”

MOUNTING BRACKET KITS-GM STAINLESS STEEL SHIFTER

Part No.

Description

1023-5

Powerglide

1023-6

350r

1023-7

4L60, 4L80, 400, & 700 r

1023-8

4L60E

1023-9

200R4

Part No.

Description

1011L

6” SS Lo Shifter Stick (Straight Stick)

1012L

8” SS Lo Shifter Stick (Straight Stick)

1013L

10” SS Lo Shifter Stick

1015L

12” SS Lo Shifter™ Stick

1016L

16” SS Lo Shifter™ Stick

Part No.

Description

1017L

23” SS Lo Shifter™ Stick

1023-1

C4

1018L

SWAN SS Lo Shifter™ Stick

1023-2

C6

1019L

28” SS Lo Shifter™ Stick

1023-3

FMX

1023-4

AOD

1023-10

Mopar

MOUNTING BRACKETS KITS-MOPAR

REAR MOUNTING BRACKET KITS

LO-STIK SHIFT ASSEMBLY

Part No.

Description

1024-1

C4

1024-2

C6

1024-3

FMXr

1024-4

AOD

1024-5

PG, 4L60E

1024-6

350

Part No.

Description

1024-7

4L60, 4L80

1021

GM

1024-8

400

1022

Ford/Mopar

1024-9

700

1024-10

Mopar

2014 catalog

gennieshifter.com

shifters

9


5-SPEED SHIFTER ADAPTER - LO-SHIFT Add a Gennie Shift Stik to your S-10 or 2 bolt style 5 speed transmissions These two adapters fit S-10 5 speed transmissions and 2 bolt style 5 speed transmissions. Made with 303 Stainless Steel which means anti corrosion and durability. The S-10 style adapter simply screws onto the stud of your transmission. The two-bolt style adapter attaches to your transmission with two simple bolts and three different positions giving you the freedom to choose the angle of installing your shift stick. Once the adapter is attached to your 5 speed transmission, you can add a “one of a kind” Gennie Shifter Commander Stick with its head turning design or the Lo-Stik™ shift sticks!

1071

1070 1070

Part No.

Description

1070

Lo-Shift {5 Speed Adapter} Fits Two Bolt Style 5 Speed shifters

1071

Lo-Shift (S-10 5 Speed Adapter) Fits S-10 Style 5 Speeds Treads onto Stud

UPDATE YOUR OLD SHIFTER TO ANY GENNIE SHIFT Own a Gennie Shifter® brand Shifter & want a new NEW S3 303 Stainless Steel Swan… just ask for the Retro Kit. Your dealer can help you make the transition with a Retro kit S3

Part No.

Description

KITS1020RETF1

S3 Retro Kit C-4

KITS1020RETF2

S3 Retro Kit C-6

KITS1020RETF3

S3 Retro Kit FMXr

KITS1020RETF4

S3 Retro Kit AOD

Kits include:

KITS1020RETG1

S3 Retro Kit P.G.

KITS1020RETG2

S3 Retro Kit 350TH

• S3 Shift Stick

KITS1020RETG3

S3 Retro Kit 4L-60

• V8 Series Knob

KITS1020RETG4

S3 Retro Kit 4L-60E

• PosiLoc™ Shift Gate

KITS1020RETG5

S3 Retro Kit 4L-80

• All necessary hardware

KITS1020RETG6

S3 Retro Kit 400TH

KITS1020RETG7

S3 Retro Kit 700-R4

• Polished 303 Stainless Steel

KITS1020RETM1

S3 Retro Kit 727

• Zinc coated CNC milled triangle brackets with delrin bushings

KITS1020RETM2

S3 Retro Kit 904

FEATURES

10 Shifters

Brackets and Shifter Assembly not included

Toll free 877-7 GENNIE

2014 catalog


1-877-7-Gennie 303-623-5789

Upper Shifter Components

This diiagram is provided for your better understanding of the Gennie Shifter® product.

Gennie Shifter® takes great pride in it’s quality parts. Gennie uses heavy duty steel & precision machined components, made in America. Competitors may resort to using less durable cast pieces or plastic, but quality is not a compromise at Gennie Shifter.®

Please Reference to order replacement parts if needed.

Gennie Shifter’s parts offer the value of longevity and most are interchangeable. Gennie understands the need to provide replacement parts and we’re happy to help customers order the correct replacement parts to revamp their shifter for another 20 years of silky smooth driving. Would you like to go from a 16” to a Swan or from a 350 to a 700R4? Talk with one of Gennie’s expert customer service staff to find & order conversion parts for your shifter. Gennie’s unique shifter designs allow for simple adaptation in most cases.

© Copyright Warning All drawings and diagrams shown here are property of and represent the intellectual assets of Gennie Shifter.® Any use of copyrighted drawings or reproduction and/or reverse engineering of said property or assets will be subject to prosecution in a court of law

2014 catalog

Part No.

Description

1

Lo-Stick Adapter

1014

2

T-Tube

TBNG10001

3

Roll Pin Retainer Clip

RETA10001

4

Roll Pin

PINS30001

5

Shifter Arm

Call*

6

Triangle Bracket #1

BRKT20032

7

Detrin Bushing

KITS1021

8

Triangle Bracket #2

BRKT20033

9

Stainless USS Washer

WASHNFC6

10

Detent Spring

SPRG10005

11

Set Screw

SCRW10014

12

Jam Nuts

NUTS10037

13

Nerutral Safety Switch Shim

WASHNFC5

14

Neutral Safety Switch

SWCH20001

15

Shifter Spacer Tube

SPAC10001

16

Gear Selector Plate

Call*

17

Socket Head Screw

BOLT100011

18

Heim Joint

JONT100001

gennieshifter.com

Shifters

11


Why is gennie shifter so special? Side Detent! The Gennie Shifter,® like most OEM Manufacturers, uses Side Detent. The world’s finest automobiles have shifter for automatics that use lateral action or Side Detent, to more precisely define gear selection. This lateral action, with it’s positive stops, virtually eliminates shifting errors that can occur with straight line button-style shifter (once the button is depressed, straight line shifter can be pushed into any gear). Side Detent also allows for silky smooth manual shifting during spirited driving. ULTRA SHIFTER BY GENNIE SHIFTER™

R 1 2

1995 LEXUS LS 400™

P

P

N D

N 3 D 2 1

R

1995 MERCEDES BENZ S-CLASS™

P D

N

1995 JAGUAR XJS™

P R N D 3 2

R

3 D-2

Not only is Gennie Shifter® home to “The Big Stick”… We’re also the King of Shifters!

Park

Reverse Neutral Drive

Gennie Shifter has superior features, such as our Neutral Safety Switch, a Gated Lock Out System and a truly safe, no-button shifter. With a Gennie Shifter,® you are never limited in your choice of knobs. And the really great thing is with Gennie Shifter’s solid steel shift stiks there are fewer moving parts with no rattle!

2nd Low

12 Shifters

Toll free 877-7 GENNIE

2014 catalog


1-877-7-Gennie 303-623-5789

Column Dress up Kit

Stuck on column shifter? You want to dress up the inside of your ride? Gennie Shifter has a dress up kit for your column. Every kit includes tilt, turn indicator, and hazard pieces. The arms are made of stainless steel and topped off with a beautifully machined aluminum mushroom knob. If you’ve changed up your shift knob and pedals, don’t stop there. Finish your rod with a Column dress up kit!

Column Dress Up Kit Part No.

Description

8053

Column Dress-Up Kit

8050

Column Shift Knob - Aluminum, Plain

Not good enough? Then add this CNC mushroom column shift knob to top it off (#8050).

Column Shift Knob

2014 catalog

gennieshifter.com

Shifter Accesories

13


Shifter Boot Kits

The Gennie Shifter Boot Kits are available in Black, Red, White, Tan, Maroon or Gray. Gennie Shifter Boot Kits are designed to be easy to install. Every Gennie Shifter Boot Kit comes with a fully polished stainless steel mounting ring, and four stainless steel machined screws for a perfect finish.

1005*

1006*

LEATHER & VINYL BOOTS Leather, durable, long lasting and top of the line. Gennie Shifter is stepping up our boots, to leather! The Gennie leather boots are a tight fit and the perfect compliment to your custom shift knob.

YOU’VE GOT OPTIONS WITH VINYL Gennie Shifter offers a variety of color options… including black, white, maroon, grey, red & tan.

FEATURES • 304 Stainless Steel Boot Ring • Stainless Steel Screws • Hand stitched Vinyl • Color Options Part No.

Description

2004*

Boot Kit - Gennie Hand Brake

2005*

Boot Kit - Lo Line

1005*

Boot Kit (Mid-Mount Shifter)*

1006*

Boot Kit (Rear Mount Shifter)*

*Contact Gennie Shifter for material color and availability.

14 Shifter Accessories

B: Black | R: Red | W: White | T: Tan | M: Maroon | G: Grey

Toll free 877-7 GENNIE

2014 catalog


1-877-7-Gennie 303-623-5789 HAND BRAKE 16 HAND BRAKE

11 HAND BRAKE

Built tough for either a truck or a hot rod. With DOM Tubing, This sleek hand brake not only looks sweet, it is high performance as well.

The 11 inch Gennie Hand Brake is perfect for the 16 or 23 inch shifter in your hot rod or classic truck. All Gennie hand brakes have hardened gear selectors made to last.

16

11

You requested it, and Gennie Shifter has delivered! The Commander Series transmission mount Ebrake. Perfect for hot rod, muscle & performance vehicles. Designed in a traditional style of hand brakes!

This is a prototype picture - actual length will be different.

Part No.

Description

2001

Gennie Hand Brake - 16

2002

Gennie Hand Brake - 11

1250

Commander Brake Handle 15”

2000

Gennie Shifter Hand Brake Bracket

1251

Commander Brake Handle 12”

1252

Commander Lo-Line Floor Mount

FEATURES

• 1020 DOM Tubing • Mounts to any Gennie Shifter bracket in upright position • Chrome • Hardened Gear Selector

2000

2014 catalog

*Boot Sold Separately

gennieshifter.com

Hand Brakes

15


The Number #1 selling Gennie Shifter Product in the country for the last 5 Years. Originally designed in the 80’s, patterned on proven industry designs. The Lo-line brake handle has remained on of Gennie Shifter’s top movers for very simple reasons, IT FITS, IT WORKS, and IT LOOKS GREAT in any style of vehicle.

DON’T FORGET! WHEN USING A LO-LINE E-BRAKE, BE SURE TO REMEMBER THESE PARTS:

Always looking to improve our products, we had to work long and hard to improve this industry benchmark. The answer was to rethink our manufacturing process and materials to provide even higher quality control and impart a “heftier tactile feel of quality”.

*SHIFT BOOT/RING #2005 * *CABLES (UN-2) #2008*

At Gennie Shifter safety is never an afterthought. We provide an indicator switch already installed on each Lo-line brake handle. This switch is a $30.00 option on our nearest competitors copy.

FEATURES

2000

• 304 Stainless Steel Construction • Delrin bushed button • Microswitch for E-brake indicator • Floor Mounted • Hardened selector

16 Hand Brakes

Part No.

Description

2003

Lo-Line™ Hand Brake

2000

Gennie Shifter Hand Brake Bracket

Toll free 877-7 GENNIE

2014 catalog


1-877-7-Gennie 303-623-5789

Brake Cables Kits

Some applications require a clevis to properly attach the cables to different types of brakes. Gennie Shifter® offers a selection of Brake Clevis Kits for you to choose from.

CLEVIS KITS

2015 2014

2012

2013

Part No.

Description

2011

Cable Clamp Kit

2012

Clevis Kit 1/4” Pin

2013

Clevis Kit 5/16 Pin

2014

Corvette Clevis Kit

2015

Explorer Clevis

Gennie Shifter® provides a variety of Emergency/ Parking brake cable kits that can be used to connect our E-Brake in almost any application. Kits are also recommended by Wilwood Engineering™ for use in installing some of their rear parking brakes.

GS stands for Gennie Shifter • UN stands for Universal • FF stands for Fat Fendered

GS - 1:

This kit provides the hardware required to attach the Gennie Hand Brake (11” or 16”) to a single cable that is compatible with Jag rear ends (9 feet of cable x 1).*

GS - 2:

This kit provides the hardware required to attach the Gennie Hand Brake (11” or 16”) to two cables that are compatible with most rear drum brakes (9 feet of cable x 2).*

UN - 2:

This kit provides the hardware required to attach most parking brake handles (including the Lo-Line Hand Brake ) to two cables that are compatible with most rear drum brakes. (9 feet of cable x 2)*

Coming Soon! 2014 catalog

UN - 1:

FF - 1:

This kit provides the hardware to link most parking brake handles including the Lo-Line Hand Brake ) to a single cable that is compatible with Jag rear ends (9 feet of cable x 1).* This kit provides a single cable and the hardware needed to connect an old style, under dash parking brake to a UN2 cable kit. (9 feet of cable x 1)

**Please contact your dealer for lengths longer than 9 feet.

Part No.

Description

2006

GS2 - For Drum Brakes - Fits Gennie Hard Brake

2007

GS1 - For Jag Rears - Fits Gennie Hand Brake

2008

UN2 - For Drum Brakes - Fits Universal Design

2009

UN1 - For Jag Rears - Universal Design

2010

FF1 Fat Fendered Single Cable to UN2

SWAN SHIFTER STICK •

gennieshifter.com

Cables

17


Throttle Cables Here at Gennie Shifter® we know that when building a custom vehicle, choice is very important. That’s why we offer you extensive choices. All of our throttle cables are available in two styles. If it’s that “All Go, No Show” look your after, Gennie Shifter’s All Black Standard Throttle Cable Kit will fit your needs. When building a modern themed vehicle with a highly detailed engine compartment, Gennie Shifter’s show stopping Braided Stainless Steel Throttle Cable Kit is your best choice. Both versions come with precision machined ends and fittings. Zinc plated. We offer these styles in a number of kits to best suit your application. * Custom cable lengths available, minimum order of 25 units.

3001 Standard - Black - 24in.

3003 Ultra - SS Braided - 36in.

3001-6 Standard - Black - 72in.

3002 SS Braided - 24in.

3003-6B 3003-6 Ultra - SS Braided - 72in. Ultra - Black - 72in.

3004 3004B Stealth - SS Braided - 36in Stealth - Black - 36in.

3005 Stealth 400 w/elec. 400 kd - SS Braided - 36in

3010

3008

3009

T.P.I. Machined Aluminum Black

Ultra T.P.I. -SS Braided 36in

3013 Ultra Stealth LT-1 - SS Braided - 36in.

3014 #2 Carb Bracket, Dual Throttle - Spring S.S.

18 cables

Ultra Stealth T.P.I. - SS Braided - 36in.

Toll free 877-7 GENNIE

3002-6 SS Braided - 72in.

3003B Ultra - Black - 36in. .

3006 T.PI. - Black - 46in.

3012 Ultra LT-1 - SS Braided -36in.

2014 catalog


1-877-7-Gennie 303-623-5789

Kick Down Cables Gennie Shifter® not only manufactures the parts—we use them! We know that you want a continuing theme with related parts to match. When running an automatic tranny, a kick down cable, also referred to as a detent cable, is just as important as having tires. All of Gennie Shifter’s Kick Down Cable Kits are built to complement all of our Throttle Cable Kits. Since your Kick Down Cable will be used in conjunction with the Throttle Cable Kit you have chosen, Gennie Shifter offers a combination of kits. Choose between a black outer housing or a braided stainless steel housing, for just the right look. Gennie Shifter builds in quality, precision CNC machining, and factory specs with an O-ring snug fit. Zinc plated. Gennie Shifter—always the right choice!. * Custom cable lengths available, minimum order of 25 units.

3015 Standard (350 only) - 36in.

3016

3017F2 Ultra - C-6/PG- 36in.

Ultra C-4 Black -36in.

3017F4 30172B Ultra AOD/FMX Ultra C-6/PG - Black 36in. SS Braided - 36in.

3017F4B Ultra AOD/FMX Black - 36in.

3017G2 3017G2B Ultra 350 - SS Braided -36in. Ultra 350 - 36in.

3017M1B

3017M1

3017F1B

3017F1

SS Braided (350 only) - 36in. Ultra C-4 - SS Braided 36in

Ultra 727/904 -SS Braided - 36in.Ultra 727/904 - Black -36in

3017G6 Ultra 700 R4 SS Braided - 36in.

3017G6B Ultra 700 R4 - Black - 36in.

3018 Ultra T.P.I./LT-1 - 44in.

3019 Kick-Down Ultra T.P.I./LT-1 70 44in.

3020 Electric 400

2014 catalog

gennieshifter.com

Cables

19


Leak Free Dipsticks ENGINE DIPSTICKS

FEATURES • Anodized aluminum components and fittings • All Stainless steel braided hose construction

4005

Integrating factory specs and in-house machining provides our customers the best made in America aftermarket products. Teflon lined braided stainless steel housing, anodized aluminum fittings and the use of OEM recommended compression fittings assure a quality fit and finish. Gennie Shifter uses a stainless steel dipstick in all applications, not the floppy plastic found in overseas look-a- likes. Don’t be fooled ...buy American made products.

TRANSMISSION DIPSTICKS

Part No.

Description

4003

Early Chevy Small Block

4004

Left Side - Early Chevy Sm. Block

4005

Late Chevy Sm. Block w/flex tube

4006

Chevy Block w/flex tube

4007

Big Block Chevy

4008

Big Block Chevy 502

4009

Chevy LS1

4010

Chevy Ramjet

4011

Ford 302

4012

Ford 351

4013

Early Ford 289/302

4014

Big Block Ford

4015

Ford FE

4016

SB Ford 302

4017

MOPAR 383

4001M1 - Transmission Mount

FEATURES • Gennie Makes transmission dipsticks for all the Ford, GM & MOPAR transmissions listed • All Stainless steel braided hose construction • Comes with a new & improved, leak free, convenient no-mess fill tube.

4002M1 - Firewall Mount Gennie Shifter® has been a leader in American made products for more than a quarter century. Our transmission dipsticks are no exception. Using Teflon lined braided stainless steel housing, anodized aluminum fittings and OEM recommended compression fittings assure a quality fit and finish. Gennie’s use of a double O-ring at the transmission OEM compression fitting and a convenient no mess fill tube assure’s you it’s the best aftermarket dipstick available.

20 Dipsticks

Part No.

Description

4001*

Flexible Trans. Tube w/machined Aluminum Dipstick - Trans Mount

4002*

Flexible Trans. Tube w/ machined Aluminum Dipsitck - Firewall Mount

Toll free 877-7 GENNIE

2014 catalog


1-877-7-Gennie 303-623-5789

PEDALS

Part No.

Description

7200ARM

Throttle Arm Assembly

7200

Triangular, gripped aluminum throttle pedal

7201

Rounded, gripped aluminum throttle pedal

7202

Spear, gripped aluminum throttle pedal

7300

Triangular, gripped aluminum brake pedal

7301

Rounded, gripped aluminum brake pedal

7302

Spear, gripped aluminum brake pedal

Throttle/Brake pad

Own the entire series

Throttle/Brake pad

Part #-7200 & 7302

Throttle/Brake pad

Part # 7201 & 7301

Back View of Brake Pad

Part # 7202 & 7300

Back View of Brake Pad

Back View of Brake Pad

Stealth Pedals Another way to quickly add some personality to your stock interior is to add a set of Gennie’s super cool Stealth Pedals. The Stealth Pedal is designed to mount on a 45˚ angle. This clever design eliminates the necessity of drilling the firewall to connect the throttle cable (Use our 44” cable, see page 17).

FEATURES • CNC machined billet aluminum • Designed to match your vehicle’s interior • Anodized colors are Clear, Red, Black, & Blue • Made in USA e

tyl lth S

Stea

Stealth Boot For use under the floor to protect your throttle cable from the elements.

Part No.

Description

Part No.

Description

7005

Stealth Throttle Pedal

7006

Stealth Boot

2014 catalog

gennieshifter.com

Pedals

21


Gennie’s PEDAL Arms are built to fit every Gennie Throttle Pad!

Spoon Pedals SEXY, SLEEK, they must be Gennie’s SPOON Pedals. Gennie’s spoon pedals can be clocked in any desired position for driver comfort and clearance. Bolts directly to firewall and pivots on delrin bushings for quiet, efficient operation and long lasting durability. These are made in U.S.A., not imitations fabricated overseas.

7200ARM

7003ARM

FEATURES • 1018 Chrome Plated Steel • Delrin bushings • Highly Adjustable • Available in Chrome or Stainless • Made in USA Part No.

Description

7001

Chrome Spoon Throttle Pedal

7002

303 S/S Spoon Throttle Pedal

7004ARM

Throttle Arm Assemblies Part No.

Description

7004ARM

SS Throttle Arm

7003ARM

Chrome Throttle Arm

7200ARM

Throttle Arm Assembly

Back View of 7100. Universa l Mount. Highly Adjustable .

Traditional Billet Pad THROTTLE ARM SOLD SEPARATELY

FEATURES

• Billet aluminum pedal • Made in USA

Back View Brake Pa d

Back View of 7101. Universal Moun t

Back View Throttle Pa d

Part No.

Description

7006RI

Aluminum Throttle Pad w/ rubber insert

7007RI

Aluminum Brake Pad w/ rubber insert

7003BG-3

Aluminum Ball Milled Throttle Pad

Part No.

Description

7024-3

Aluminum Ball Milled Brake Pad

7100

Throttle Pad - Polished Aluminum

7101

Brake Pad - Polished Aluminum

Gripped Pad

Brake Pedal Part No.

Description

7007

304 Stainless Steel w/Rubber Insert

22 Pedals

Mounting Material

Toll free 877-7 GENNIE

All 303 Stainless Steel construction with black rubber insert for positive grip and classic looks

2014 catalog


1-877-7-Gennie 303-623-5789

Dimmer Switch Covers Gennie’s Dimmer Switch Covers are round and come in either Stainless Steel or billet aluminum. Part No.

Description

7009

Dimmer Switch Cover - SS - Ford

7010

Dimmer Switch Cover - Alum - Ford

7011

Dimmer Switch Cover - SS - GM

7012

Dimmer Switch Cover - Alum - GM

7012

7011

HOOD PROPS 6008

Conduits

6007B / 6006B

6006 Gennie Shifter’s Hood Props for ‘28 - ‘34 Ford and Chevy models are available in hand polished stainless steel. Made in the USA. Don’t be fooled by cheap look-a-likes. The Ford versions are also available in a black rubberized coated steel Part No.

Description

6006

Hood Prop - ‘28 - ‘36 Fords

6006B

Hood Prop - ‘28 - ‘36 Fords - Black

6007

Hood Prop - ‘33 - ‘34 Fords

6007B

Hood Prop - ‘33 - ‘34 Fords - Black

6008

Hood Prop - early GM Vehicles

2014 catalog

gennieshifter.com

6012

Gennie Shifter is proud to offer another American Made hot rod product. The Headlight Conduit is made of polished 304 Stainless Steel ends, Teflon lined stainless steel braided hose, that is 14.5 inches in length overall and contains 21 inches of 18 gauge automotive wire. Part No.

Description

6012

Headlight Conduit (set of 2)

Hood Props

23


Clevis Kit

Delrin Bushings

2015 2014

A Package of three delrin bushings will help you tune up your Gennie Shifter.

2013

Part No.

Description

KITS1021

Delrin Bushing Pack

Neutral Safety Switch

Part No.

Description

2011

Cable Clamp Kit

2012

Clevis Kit ¼” Pin

2013

Clevis Kit 5/16”Pin

2014

Corvette Clevis Kit

2015

Explorer Clevis Kit

2012

This ball actuator switch has been used on Gennie Shifters for over 20 years. Part No.

Description

SWCH20001

Neutral Safety Switch

1010

Backup Switch Kit

Shim Kit Having trouble getting your Neutral Safety Switch working right? Use our shims to obtain correct travel on the switch.

Part No.

Description

KITS1010

N/S Switch Shim Kit

26 parts department

Toll free 877-7 GENNIE

2014 catalog


1-877-7-Gennie 303-623-5789

304 Stainless Boot Rings

Oval Sheet Metal Screws

I.D. 4 inches, O.D. 5 inches, and Bolt Circle 4.4 inches. These boot rings are sculpted for counter sunk screws. Part No.

Description

RING10001

Shift Boot Ring S/S - Polished

Shift Gates

Package of six phillips counter sink screws. Part No.

Description

KITS1022

48 x 1 Phillips S/S Oval Sheet Metal Screw

Microswitch

All of Gennie Shifter’s Shift Gates are heat treated (hardened) for use with stainless steel sticks.

Gennie Shifter uses this switch on its LoLine E-Brake Handle for indication, but this switch can be used for numerous applications with its pin plunger type operation. 10-15 amp rating.

1.4 Part No.

Description

PLAT10011

Plate - Selector 350-400 PosiLoc™

PLAT10012

Plate - Selector 350 RM PosiLoc™

PLAT10014

Plate - Selector C4 PosiLoc™

Part No.

Description

PLAT10015

Plate - Selector C6 700 PosiLoc™

SWCH10001

Microswitch

PLAT10016

Plate - Selector PG PosiLoc™

PLAT10017

Plate - Selector 700R4 RM PosiLoc™

PLAT10018

Plate - Selector Mopar PosiLoc™

2014 catalog

Headlight Bar Pads

Part No.

Description

6003

Headlight Bar Rubber Pads

gennieshifter.com

parts department

27


Roll Pin Retainer

Roll Pins

Part No.

Description

Part No.

Description

RETA10001

ROLL PIN RETAINER

PINS30001

Roll Pin ¼ x 7/8

Transmission Filler Tube Plastic Cap This delrin button eliminates vibration in the T-Tube. For use on all Gennie Shifters

No More mess Gennie Shifter’s Transmission Fill Tube allows for anomess fill for narrow dipstick tubes. Part No.

Description

4000

Transmission Filler Tube

Part No.

Description

CAPS20001

Small Plastic Black Button Cap

Proportioning Valves Adjustable Proportioning Valves allow you to correctly time the pressure of braking front to rear. It’s a must with disc /drum or disc / disc applications.

28 Parts Department

Part No.

Description

2016

Proportioning Valve

Toll free 877-7 GENNIE

2014 catalog


1-877-7-Gennie 303-623-5789

Knob Adapters

Springs

Gennie’s knob adapters allow most knobs to be used on any automatic or manual transmission shift stick.

If you decide you would like a stiffer spring for more spirited driving, upgrade with these springs! Part No.

Description

Part No.

Description

SPRG10005

Internal Spring 16” & 23” (heavier) 114lbs/in

KNOBIN2002

INSERTS 1/4-28, 5/16-18, 5/16-24

SPRG10006

Internal Spring 12” (lighter) 75lbs/in

KNOBIN2003

INSERTS 3/8-16, 3/8-24

KNOBIN2004

INSERTS 7/16-14, 7/16-20

KNOBIN2005

INSERTS 1/2-13, 1/2-20

KNOBIN2006

INSERTS 7MM-1.00, 8MM-1.25

KNOBIN2007

INSERTS 10MM-1.25, 10MM-1.50

KNOBIN2008

INSERTS 12MM-1.25, 12MM-1.50, 12MM-1.75

KNOBINR2001

½ - 20 Reducer

KNOBINR2002

10mm 1.50 Reducer

KNOBINR2003

12mm 1.75 Reducer

KNOBINR2004

3/8 - 16 Reducer

KNOBINR2005

3/8 - 24 Reducer

Part No.

Description

KNOBINR2006

5/16 - 18 Reducer

KITS1019

Shift Stick Hardware Kit

KNOBINR2007

5/16 - 24 Reducer

KNOBINR2008

½ - 13 Reducer

KNOBINR2009

10mm Reducer

KNOBINR2010

12mm Reducer

KNOBINR2011

7/16-14 Reducer

KNOBINR2012

7/16-20 Reducer

KNOBINR2013

1/4-28 Reducer

KNOBINR2014

7MM - 1.00 Reducer

KNOBINR2015

8MM - 1.25 Reducer

KNOBINR2016

12MM - 1.50 Reducer

2014 catalog

Shift Stick Hardware Kit This kit is a must when changing sticks. The Shift Stick Hardware Kit provides the springs,roll pin, roll pin retainer, and the delrin cup for the stick.

gennieshifter.com

parts department

29


Gennie Shifters 8 ball shift knobs are a sure shot! 2 ¼ in diameter. Get behind the 8 ball with Gennie’s newest pool shark inspired shift knobs. Available in standard billiard colors. Don’t forget your brodie application for your steering wheel! *Check your local laws for brodie knobs.

Bottom View

Shift Knob Number, Part Number

1-KNOBEP1301, 2-KNOBEP1302, 3-KNOBEP1303, 4-KNOBEP1304, 5-KNOBEP1305, 6-KNOBEP1306, 7-KNOBEP1307, 8-KNOBEP1300, 9-KNOBEP1309, 10-KNOBEP1310, 11-KNOBEP1311, 12-KNOBEP1312, 13-KNOBEP1313, 14-KNOBEP1314, 15-KNOBEP1315, Cue Ball-KNOBEP1308 These “snooker” knobs make great shift knobs. 2 inches in diameter, these knobs are great for a simple, minimilist look. KNOPEP1320 - White Snooker Knob with red triangle. KNOBEP1321 - White Snooker Knob with black circle.

Gennie Shifter Billiard Rack Now bring Gennie Shifter into your pool room! Own your very own Gennie Shifter Pool Rack! Made of 6061 polished aluminum. The Gennie Shifter Pool Rack is made with the same high quality materials and craftsmanship as all of ourproducts, so Rack Em’ with Gennie Shifter.

15 Ball Pool Rack - Part #- POPrack15 9 Ball Pool Rack-Part # - POPrack9

POP Rack 15

POP Rack 9

Corner Pocket Shift Knob Display POP8 Shift Knobs sold separately

30 shift knobs

• Polished aluminum shift knob display • Push rod ejection system to easily sell and replace shift knobs from display • Available in 15 shift knob & 9 shift knob configurations. See sizes above

Award Winning

Dealers call 1-866-623-1963 to order your high quality knob display today!

Toll free 877-7 GENNIE

2014 catalog


1-877-7-Gennie 303-623-5789

Choose from these 6 Manual Speed Patterns These Engraved shift knobs are sure to give you a nostalgic factory-fresh look to your vehicle, and are constructed of thermoset resin. Red, yellow & ivory knobs are 2.25 inch in diameter. The ivory knobs are also available in 2 inch knob for a more minimiliast look! Black shift knobs are available in only 2 inch.

Choose a shift pattern and color to match your vehicle and shift into gear today!

2

new bold colors

R 1 3

1 3 5

1 3

R 2 4

1 3

2 4

2 4 R

2 4 R

1 3 5

R 2 4

KNOBEP1601

KNOBEP1602

KNOBEP1603

KNOBEP1604

KNOBEP1605

KNOBEP1606

KNOBEP1620

KNOBEP1621

KNOBEP1622

KNOBEP1623

KNOBEP1624

KNOBEP1625

1 3 5 2 4 6 R

21/4

21/4

KNOBEP1630

2

2

KNOBEP1631

KNOBEP1632

KNOBEP1633

KNOBEP1634

KNOBEP1635

R 1 3

1 3 5

1 3

R 24

2 4

2 4 R

2 4 R

1 3 5

R 2 4

KNOBEP1650-2”

KNOBEP1651-2”

KNOBEP1652-2”

KNOBEP1653-2”

KNOBEP1654-2”

KNOBEP1655-2”

KNOBEP1640-2.25”

KNOBEP1641-2.25”

KNOBEP1642-2.25”

KNOBEP1643-2.25”

KNOBEP1644-2.25”

KNOBEP1645-2.25”

13

15 3

1/4

2014 catalog

gennieshifter.com

2 4 6R

shift Knobs

31


Vehicle Shifter Thread Adapters Find the thread size and get the adapter you need to add the Original Gennie Shifter shift knob to your vehicle! If you do not find your vehicle’s application on this list please call us at 1-866-623-1963.

U.S. Automobiles Vehicle

GearBox Threads

Camaro 1983-96

Manual

16mm X 1.50

Camaro 1967-2002

Manual

16mm X 1.50

Chevy Camaro,RS,Z-28 1986-2002

Manual

6mm X 1.50

Chevy & GMC Truck 1936-1946

Manual

3/8 X 24

Chevy Truck 1967-1972

Manual

3/8 X 24

Chevy Older Models “1950s”

Manual

3/8 X 24

Corvette 1984-2004

Manual

9/16 X 18

Corvette C4 1995-96

Manual

9/16 X 18

ZF 6-speed + C5

Manual

9/16 X 18

Corvette 1968 to 1982

Manual

9/16 X 18

Dodge Magnum 2005-06

Manual

8mm X 1.25

Newer R/Ts

Manual

8mm X 1.25

Chrysler 300s

Manual

8mm X 1.25

Chrysler SRT 8’s

Manual

8mm X 1.25

Dodge Viper

Manual

1/2 X 20

Mustang 1964-69 (Most Models)

Manual

1/2 X 20

Mustang 1979-2004 (Most Models)

Manual

12mm X 1.75

Ford Mustang 1994-2004

BorgWarnerT5

12mm X 1.75

Ford Cobra & Mustang 1999

Manual

12mm X 1.75

Ford SVT Contour

Manual

1/2 X 20

Ford Ranger XLT

Manual

5/8 Splined

Ford F-150 1993 and 2000

Manual

5/8 Splined

Ford Probe

Manual

10 X 1.25

Ford Escort LX

Manual

10 X 1.25

Ford Older Models 1950s

Manual

5/16 X 24

The brand names on this chart are not endorsed by Gennie Shifter, and Gennie Shifter makes no claims to the respective trademarks. They may not otherwise be copied, reproduced, distributed, published, downloaded, displayed or transmitted by any means without the prior written permission of the copyright or trademark owner.

32 SHIFT knobs

Vehicle

GearBox

Jeep Wrangler 1987 - 2004

Manual

Jeep Wrangler TJ & Unlimited ‘97-’06

Manual

10mm X 1.50

Jeep ‘55 - ‘86 CJ5/CJ6/CJ7/ CJ8 Scrambler

Manual

3/8 X 24

55-83 Jeep CJ-5

Manual

3/8 X 24

55-75 Jeep CJ-6

Manual

3/8 X 24

76-86 Jeep CJ-7

Manual

3/8 X 24

81-85 Jeep CJ-8

Manual

3/8 X 24

76-83 Jeep CJ-5

Manual

3/8 X 24

76-86 Jeep CJ-7

Manual

3/8 X 16

81-85 Jeep CJ-8

Manual

3/8 X 16

87-95 Jeep Wrangler (YJ)

Manual

3/8 X 16

97-06 Jeep Wrangler (TJ)

Manual

10mm X 1.50

04-06 Jeep Wrangler

Manual

10mm X 1.50

Unlimited (TJ)

Manual

10mm X 1.50

Jaguar XJ6 1995-97

Manual

8mm X 1.25

Jaguar X-Type/XJ8/XK8

Manual

8mm X 1.25

Jag XJ-S 4.0L (from mid-1996, vin221855-on)

Manual

8mm X 1.25

Jag XJ-S 6.0L (from mid 1993, vin188700-on)

Manual

8mm X 1.25

Pontiac Firebird 1983 - 96

Manual

16mm X 1.50

Pontiac Fiero

Manual

16mm X 1.50

PT Cruiser

Kustom Kruzr Adapter

Manual w/

3/8 X 16 threads

Harley Davidson & Indian Motorcycle

Toll free 877-7 GENNIE

Threads 3/8 X 16 10mm X 1.50

3/8 X 24

2014 catalog


1-877-7-Gennie 303-623-5789 gennie shifter’s master thread systems allows you to use your gennie shifter knob on any stick shifter Import Auto with Original Manual Gearbox Vehicle

GearBox Threads

Vehicle

GearBox

Threads

Acura

Manual

10mm X 1.50

Datsun 280ZX

Manual

8mm X 1.25

BMW-325

Manual

15mm X 1

Datsun Older Hatchback

Manual

8mm X 1.25

Honda Models

Manual

10mm X 1.50

Hundai Excel GL

Manual

10mm X 1.25

Datsun (2000’s & 67 1/2 -70 1600’s)

Manual

8mm X 1.25

Hundai Accent

Manual

10mm X 1.25

(SPL311-11001 up)

Manual

Geo Tracker

Manual

12mm X 1.25

Isuzu Impulse

Manual

10mm X 1.25

Geo Storm

Manual

10mm X 1.25

Subaru Models (Susuki-

12mm X 1.25

Manual

10mm X 1.25

Impreza

Manual

Mazda Miata All Years Mazda RX-8 RX-7

Manual

10mm X 1.25

Susuki Samurai

Manual

12mm X 1.25

Mazda Models

Manual

10mm X 1.25

Toyota Supra 1993 -98 (JZ)*

Manual

12mm X 1.25

Mitsubishi lancer/ evolution/eclipse

Manual

10mm X 1.25

Toyota MR2 1991-95 (SW20)* Manual

12mm X 1.25

Toyota Corolla

Manual

12mm X 1.25

Mitsubishi Jeep SUV

Manual

10mm X 1.25

Toyota Celica-Tercel

Manual

12mm X 1.25

Miata

Manual

10mm X 1.50

Toyota Camry

Manual

12mm X 1.25

Nissan Skyline (R34)*

Manual

12mm X 1.25

Toyota Trucks

Manual

12mm X 1.25

Nissan Frontier

Manual

10mm X 1.25

Toyota (Most Models)

Manual

12mm X 1.25

Nissan Sentra

Manual

10mm X 1.25

Ferrari 206,246,308,328,348

Manual

10mm X 1.25

Nissan Maxima

Manual

10mm X 1.25

Ferrari Testarossa

Manual

10mm X 1.25

Nissan 350Z

Manual

10mm X 1.25

Scion xA xB and tC

Manual

12mm X 1.25

Nissan (Most Models)

Manual

10mm X 1.25

Scion tC and xB 2008 only

Automatic

8mm X 1.25

Datsun 300ZX (Nissan)

Manual

10mm X 1.25

The brand names on this chart are not endorsed by Gennie Shifter, and Gennie Shifter makes no claims to the respective trademarks. They may not otherwise be copied, reproduced, distributed, published, downloaded, displayed or transmitted by any means without the prior written permission of the copyright or trademark owner.

2014 catalog

gennieshifter.com

shift knobs

33


Aftermarket Shifter

Import Auto with Original Manual Gearbox

Threads

Gennie Commander

7/16 X 20

VOLKSWAGEN

GearBox Threads

Gennie Shifter Lo-Dapt

3/8 X 16

Beetle 1952 - 61

Manual

10mm X 1.50

Gennie Shifter Lo-Dapt II

16mm X 1.50

Beetle 1962 - 67

Manual

7mm X 1.0

Gennie Shifter Lo-Dapt III

(threadless)

Beetle 1968 - 79

Manual

12mm X 1.50

Brodie Knob Adapter

16mm X 1.50

Ghia 1956 - 61

Manual

10mm X 1.50

B&M Shifter

1/2 X 20

Ghia 1962 - 67

Manual

7mm X 1.0

EMPI Shifter

3/8 X 24

Ghia 1968 - 74

Manual

12mm X 1.50

SCAT Shifter

3/8 X 16

Bus 1952 - 67

Manual

10mm X 1.50

3/8 X 16,

Bus 1968 - 79

Manual

12mm X 1.50

3/8 X 24,

Thing 1973 - 74

Manual

12mm X 1.50

Type 3 1962 - 74

Manual

12mm X 1.50

7/16 X 20,

VW Rabbit

Manual

12mm X 1.50

16mm X 1.50

VW Jetta

Manual

12mm X 1.50

VW Golf

Manual

12mm X 1.50

Volkswagen 1980 - Up (Most Models)

Manual

12mm X 1.50

Volkswagen Vanagon 1984 to 1991

Manual

14mm X 1.50

EMPI & Hurst Trigger Shifters

Manual

3/8 X 24

SCAT Shifter

Manual

3/8 X 16

HURST Shifter*

1/2 X 13,

Lokar Shifter Knob Adapter

3/8 X 16, 3/8 X 24

*Nearly all chrome-plated Steel sticks used on aftermarket Hurst shifters are 3/8 X 16. Aluminum, Black Aluminum, or Black Steel Sticks (Late Model Mustang and Quarter sticks) are 7/16 X 20. Older Hurst OEM shifter is 3/8x 24.One exception to this is the T-56 six-speed shifter. While the chrome stick version is 3/8 X 16, the black stick version is 16mm X 1.50. The brand names on this chart are not endorsed by Gennie Shifter, and Gennie Shifter makes no claims to the respective trademarks. They may not otherwise be copied, reproduced, distributed, published, downloaded, displayed or transmitted by any means without the prior written permission of the copyright or trademark owner.

34 SHIFT knobs

Toll free 877-7 GENNIE

2014 catalog


1-877-7-Gennie 303-623-5789 Hurst Shifter Thread Size VEHICLE

THREADS

Chrome replacement sticks thread size

3/8 X 16

Aluminum stick thread size

7/16 X 20

Auto/stick 1 & 3 stick thread size

3/8 X 16

Billet/Plus w/chrome stick

3/8 X 16

Comp/Plus (early)

3/8 X 16

Comp/Plus (late), & OEM

3/8 X 16

Dual/Gate 2 thread size

3/8 X 16

Indy 3 speed thread size

3/8 X 24

Indy Matic 1 thread size

3/8 X 24

Indy Pick Up Truck

3/8 X 24

Indy Qualifier thread size

3/8 X 16

Indy SSA thread size

3/8 X 24

Pro-Matic, before 1987

½ X 13

Pro-Matic 2, since 1987

3/8 X 16

Quarter/Stick & Q/Stick 2

7/16 X 20

Super Shifter3 thread size

3/8 X 16

Vertical Gate, before1987

1/2 X 13

V-Gate 2, since 1987

3/8 X 16

V-Matic, before 1987

½ X 13

V-Matic 2, since 1987

3/8 x 16

Your Vehicle Needs a Gennie Shift Knob! WE MAKE IT EASY TO PUT A GENNIE SHIFTER KNOB IN YOUR VEHICLE! Gennie Shifter’s knob selection all feature a master thread system. So whether you’re fitting a knob to the Gennie Shifter stick’s 5/16-18” thread pattern or replacing a knob on your current stick/shifter, Gennie Shifter Knobs will fit your application. Metric & standard sizes are available. Don’t know what size you need? See page 30 -33 for a list of sizes or ask your authorized dealer. Gennie Shifter knobs are pre-drilled to fit threaded inserts.

The brand names on this chart are not endorsed by Gennie Shifter, and Gennie Shifter makes no claims to the respective trademarks. They may not otherwise be copied, reproduced, distributed, published, downloaded, displayed or transmitted by any means without the prior written permission of the copyright or trademark owner.

INSERT KITS

Complete threaded adapter inserts kits. Internal adapter sizes available are:

External Size 16mm x 1.5

INTERNAL ADAPTER SIZES KNOBIN2000

FULL KNOB INSERT KIT-SAE, Standard. 5/16 -18, 5/16 -24, 3/8 -16, 3/8 -24, 7/16 -14, 7/16--20, 1/2 -13, 1/2 -20, 1/4 -28

KNOBIN2001

FULL KNOB INSERT KIT-METRIC 7mm-1.00, 8mm-1.25mm, 8mm-1.50, 10mm-1.25, 10mm-1.50, 12mm-1.25, 12mm-1.50, 12mm-1.75

2014 catalog

gennieshifter.com

shift knobs

35


Lo-Dapt™ Tired of the same old push button shift knob? Want to have the ability to quickly and easily switch out that old shift knob with one of the many Gennie Shifter shift knobs? Gennie Shifter’s Lo-Dapt™ Shift Knob Adapter is your answer! As with all it’s products, Gennie Shifter’s Lo-Dapt™ Shift Knob Adapter is built with the customer in mind. This means Gennie’s Lo-Dapt™ Shift Knob Adapter is simple to install because it uses the same 3/8-16” threads used by most aftermarket shift knobs. And, as always, Gennie Shifter doesn’t just speak about quality, we build it! By using hidden jam nuts, brass tipped black oxide set screws (not plastic) and Gennie’s polished 303 Stainless Steel, the Lo-Dapt™ Shift Knob Adapter gives you the quality, durability and professional look that you have the right to expect.

Go Lo-Dapt Go & ADAPT YOUR Lo-Dapt BUTTON SHIFTER FOR ANY YOUR SHIFT & ADAPT KNOB! BUTTON SHIFTER FOR ANY SHIFT KNOB!

Reclaim the freedom to express yourself with Gennie Shifter’s Lo-Dapt™ Shift Knob Adapter. As a shifter manufacturer, Gennie Shifter wants to give you the customer many choices so that you can choose the best option for your car. That’s why Gennie offers such an extensive selection of shift knobs. Gennie Shifter’s 303 stainless steel design allows for the most choice for your vehicle’s shift knob.

Just about anything can be mounted as a shift knob!

LO-DAPT II

LO-DAPT

LO-DAPT III

Part No.

Description

1050

Lo-Dapt for use with Lokar® and American™ Shifter Thread Size at 3/8-16”

1051

Lo-Dapt II for use with automatic JK Jeep™ Thread Size at 16mm X 1.50. *For manual JK Jeep™ use Lo-Dapt III.

1060

Lo-Dapt III 5/16” Thread Size at 16mm X 1.50

1061

Lo-Dapt III 3/8” Thread Size at 16mm X 1.50

1062

Lo-Dapt III 1/2” Thread Size at 16mm X 1.50

1063

Lo-Dapt III 5/8” Thread Size at 16mm X 1.50

NOTE: Shifter and knob not included with any Lo-Dapt Shift Knob adapter model. Gennie Shifter is in no way associated with any of the above companies. Thread sizes may vary from make and model of vehicle.

36 SHIFT knobs

Toll free 877-7 GENNIE

2014 catalog


1-877-7-Gennie 303-623-5789

Gennie Shifter Exclusive Knob Series Each shift knob character is a Gennie Shifter Exclusive. Choose from 13 original collector knob designs. Built with Gennie Shifter craftsmanship and originality. Gennie Shifter encourages enthusiasts to collect them all or by them in a series. Only 500 of each model will be produced, so supplies are limited. These new knobs are acrylic coated for longer wear and are predrilled with inserts for adapters to fit any shifter.

Limited Edition Only 500 of Each Manufactured. Limited Availability

Bulletnose

Bulletnose

Bomber

Bomber

KNOBGK9007

KNOBGK9006

KNOBGK9004

KNOBGK9003

Black Jack

King Bling

Hot Head

Chopper

Lost Wages

KNOBGK9009

KNOBGK9010

KNOBGK9008

KNOBGK9012

KNOBGK9011

Chuck

Knobber

Huffer

Huffer

KNOBGK9000

KNOBGK9005

KNOBGK9002

KNOBGK9001

2014 catalog

gennieshifter.com

SHIFT KNOBS

37


The gennie

BRODRC1001

Not intended for highway use. Check local laws.

Match Your Shift Knob & Brodie Knob

The Gennie Brodie Knob™ is the first ever completely customizable brodie knob clamp which will allow car enthusiasts the ability to now change out their brodie knob with ease and the ability to match the brodie knob with their shifter knob. This design originated with Gennie Shifter™, and it’s quality cannot be matched anywhere else in the industry. This innovative product will allow you to further customize your hot rod and add that personal touch you have been looking for.

Completely Customizable

Brodie Knob Clamp That Allows You To Use Any Knob You Choose!

BRODRC1008

Gennie Skulls

Some of the popular Gennie Shifter Shift knobs the Skull Series. Resin molded, hand painted for the most realistic looking Skull Shift Knobs. Most of these knobs are pre-drilled to accept Gennie Shifter threaded inserts.

KNOB SK1001 SKULL

38 SHIFT knobs

The Gennie Brodie Knob clamp increases the bold spectrum of brodie knob/ shifter knob combinations to over 40,000! This means every Gennie knob will work on our Brodie Knob!

KNOB SK1002 EYEBALL

KNOB SK1003 REDEYES

Toll free 877-7 GENNIE

2014 catalog


1-877-7-Gennie 303-623-5789

Series

Bring your hot rod back to it’s factoryfresh look with an Original Series Knob. CNC machined & designed to match your vehicle. 1-5/8” in height. Anodized and laser etched for increased scratch resistance. Special colors and/or promotional engraving for your special event (available at additional cost - call dealer for info). Available in raw & blasted finishes. Colors are Clear, Red, Black & Blue. Standard engraving includes 2-speed, 3-speed, 4 speed, and V8 Logos.

1 5/8

KNOB AL1003GS44SPD GS CLEAR KNOB AL1001Original V8 AL Black

KNOBAL1002GS4 - Original 4spd GS Blue KNOBAL1001GS4 - Original 4spd GS Black KNOBAL1004GS4 - Original 4spd GS Red

KNOBAL1002 - Original V8 Blue

KNOBAL1002GS3 - Original 3spd GS Blue

KNOBAL1003 - Original V8 Clear

KNOBAL1001GS3 - Original 3spd GS Black

KNOBAL1004 - Original V8 Red

KNOBAL1004GS3 - Original 3spd GS Red KNOBAL1003GS3 - Original 3spd GS Clear KNOBAL1002GS2 - Original 2spd GS Blue KNOBAL1001GS2 - Original 2spd GS Black KNOBAL1004GS2 - Original 2spd GS Red KNOBAL1003GS2 - Original 2spd GS Clear

KNOB 20010 - Original Blk Plastic Plain KNOB 20011 - Original Blk Plastic 3spd KNOB 20012 - Original Blk Plastic 4spd KNOB 20013 - Original Blk Plastic Powerglide

KNOBAL1002GS2 - Original 2spd GS Blue

Give your shifter an explosive effect with our Atomic Series knobs. CNC machined & designed to match your vehicle. Anodized and laser etched for increased scratch resistance. Colors are Clear, Red, Black & Blue.

2014 catalog

KNOBAL1041

KNOBAL1044G KNOBAL1041G - Atomic AL Black Grooved

KNOBAL1041 - Atomic AL Black

KNOBAL1042G - Atomic AL Blue Grooved

KNOBAL1042 - Atomic AL Blue

KNOBAL1043G - Atomic AL clear Grooved

KNOBAL1043 - Atomic AL clear

KNOBAL1044G - Atomic AL Red Grooved

KNOBAL1044 - Atomic AL Red

gennieshifter.com

SHIFT KNOBS

39


Gennie Gems

CNC machined & designed to match your rod, car or truck.

Anodized for increased scratch resistance. Available in Ramped, Grooved, Swirl or Diamond patterns Colors are Clear, Red, Black & Blue. 2-1/2” in height.

Ramped

Diamond

KNOBAL1081R - GG Black KNOBAL1084R - GG Red KNOBAL1082R - GG Blue KNOBAL1083R - GG Clear

KNOBAL1081D - GG Black KNOBAL1084D - GG Red KNOBAL1082D - GG Blue KNOBAL1083D - GG Clear

Swirl

Grooved

KNOBAL1081S - GG Black KNOBAL1084S - GG Red KNOBAL1082S - GG Blue KNOBAL1083S - GG Clear

KNOBAL1081 - GG Black KNOBAL1084 - GG Red KNOBAL1082 - GG Blue KNOBAL1083 - GG Clear KNOBAL1083BG - GG Clear Blasted

Series

2

Crisp edges. Smooth Lines. Precision designed for your hot rod. CNC machined & designed to match your vehicle. Anodized for increased scratch resistance. Colors are Clear, Red, Black & Blue. 2-3/16” in height

3/16

KNOBAL1061 - Industrial AL Black

KNOBAL1063 - Industrial AL Clear KNOBAL1064 - Industrial AL Red

40 SHIFT knobs

KNOBAL1062 Industrial AL Blue

Toll free 877-7 GENNIE

Bottom view with insert

Top View

2014 catalog


1-877-7-Gennie 303-623-5789

G E N N I E

Our Gennie Lanes knobs are exactly what you need to make your hot rod a perfect 10! Super cool, CNC machined & designed to match your vehicle. Anodized for increased scratch resistance. Colors available are Clear, Red, Black & Blue. Standard engraving includes 2-speed, 3-speed and 4-speed.

2"

Bottom view with insert

KNOBAL1051 - Bowling Pin Clear Finish only.

4 Speed

3 Speed

KNOBAL10214 - Ball Black 4spd KNOBAL10224 - Ball Blue 4spd KNOBAL10234 - Ball Clear 4spd KNOBAL10244 - Ball Red 4spd

KNOBAL10213 - Ball Black 3spd KNOBAL10223 - Ball Blue 3spd KNOBAL10233 - Ball Clear 3spd KNOBAL10243 - Ball Red 3spd

2 Speed

Plain KNOBAL1021 - Ball Black KNOBAL1022 - Ball Blue KNOBAL1023 - Ball Clear KNOBAL1024 - Ball Red

KNOBAL10212 - Ball Black 2spd KNOBAL10222 - Ball Blue 2spd KNOBAL10232 - Ball Clear 2spd KNOBAL10242 - Ball Red 2spd

Orbit Series

2014 catalog

gennieshifter.com

SHIFT KNOBS

41


Our Prohibition Series keg-shaped knobs come with the “Classic Domer” on top. Anodized for increased scratch resistance.

While supplies last!

2

KNOBAL1031

Available Now

KNOBAL1071

Available Now

KNOB20006 - Aluminum. Plain KNOB20007 - Aluminum. 3 Speed KNOB20008 - Aluminum. 4 Speed KNOB20009 - Aluminum. 2 Speed

2"

42 SHIFT knobs

Toll free 877-7 GENNIE

2014 catalog


1-877-7-Gennie 303-623-5789

Questions & Answers Dipsticks

Q: How do I secure my Transmissions Dipstick?

A: When installing Gennie Shifter’s Dipsticks use automotive silicon around the O-ring at the base of the Dipstick Tube for a more secure seal.

E-BRAKES

Q: Which E-brake Cable Kit do I need?

A: For Standard Rear Ends the UN2 and GS2 Brake Cables provide everything you need from the Brake Handle to the Brakes. UN1 and GS1 Cable Kits work for Jag Rear Ends. The FF-1 Cable Kit connects the under the dash pull-style Brake Handles to our two Cable Kits. GS1 and GS2 Kits work with the Gennie Shifter upright brakes while the UN1 and UN2 Kits are a universal application. Q: I am using Disc Brakes. Which Clevis Kit do I need?

A: Gennie Shifter offers several Clevis Kits that can accommodate most disc brake applications. For Lincoln Rear Ends we have the 5/16” inch Clevis Kit, for Wilwood Caliper-style Emergency Brakes the ¼” inch clevis is used, for the Wilwood External Drum Brakes use Gennie Shifter’s EXP Clevis. For Corvette Rear Ends use the Corvette Clevis Kit.

LO-STIK™

Q: Do I have to use a Gennie Shifter stick with Lo-Stik™?

A: No, Gennie’s Lo-Stik™ offers safety and reliablility with its side detent gate system and built in neutral safety switch, even when you build your own stick or modify an existing one. Q: How do I attach my shifter handle to the Lo-Stik?

A: The Lo-Stik™ is made of 303 Stainless Steel, therefore you can weld yours or drill and set screw it to the machined surface. The Lo-Stik™ must be removed from the T-Tube prior to any welding, see exploded view. WARNING: Gennie Shifter is not responsible for product once it has been modified. Buy a Gennie stick! 2014 catalog

gennieshifter.com

Q&A

43


SHIFTERS

Q: Does the Gennie Shifter use a button?

A: No - the Gennie Shifter® has a safety lock-out system that uses a gated-shift pattern and strong spring tension to keep drivers in the proper gear. Our shift pattern locks drivers into park and locks them out of reverse and low gears. This allows Gennie Shifter® to use solid steel in our shift sticks and lets our customers use any shift knob they want to customize their ride. With fewer moving parts in the stick, there is no rattle or vibration through the solid steel shifter. Q: How do I adjust my Gennie Shifter® so that the Shift Stick doesn’t hit the dash or the seat?

A: Each shifter is mounted to the brackets using two slotted holes beneath the gear selector plate. To adjust the shifter, simply loosen the two bracketmounting bolts slightly, tilt the shifter forward or back, then retighten. In some cases it is recommended that a different length shift handle be used in order to avoid these problems where there is limited room. Q: I’d like a shorter (or longer) Shift Stick for my car – do I need a new Shifter? A: No - Gennie Shifter’s design allows for a simple replacement of our sticks. Each Gennie Shifter® Stick can be easily removed and exchanged with different lengths available from your Gennie Shifter dealer. Q: Do you offer a Neutral Safety Switch?

A: Every Gennie Shifter® includes a Neutral Safety Switch. Q: My car starts in Drive, how do I adjust the Neutral Safety Switch?

A: The Neutral Safety Switch is threaded into the base of each shifter. To adjust the switch, either thread it closer to the bottom of the shift stick or space it out slightly, so that the vehicle starts only in neutral and park.

44 Q & A

Toll free 877-7 GENNIE

2014 catalog


1-877-7-Gennie 303-623-5789 Q: I’m pulling the Transmission out of the car. Is it necessary to remove the Shifter?

A: No. Gennie Shifter® sticks are easily removable, by simply removing Roll Pin Retainer, Roll Pin and Detent Spring, the Shifter will come out of the T-tube. See diagram on page 16. Q: What do I do if my AOD Shift Lever will not reach the provided arm?

A: Various AOD’s use a downward shift arm that needs to be removed and repositioned 180 degrees in order to work with the Gennie Shifter.

PEDALS/CABLES

Q: Will the Gennie Shifter Throttle Pedal or Cable work with aftermarket products?

A: Yes, Gennie works with many aftermarket products because Gennie was used as a model for many other manufacturers. Q: Will Gennie Shifter’s Brake Pedals mount to a stock clutch or brake arm?

A: Yes, Gennie uses a 1/2 - 20” stud that is compatible with most aftermarket pedal arms. LO-DAPT™ Q: Can I use a Gennie Shifter knob on an aftermarket push button style shifter?

A: Yes, Gennie offers a stainless steel adapter for your Lokar™ shifter and some OEM Push Button style shifters. Please Inquire..

Q: Does Gennie’s Lo-Dapt™ use any plastic?

A: No, as with all Gennie products, we use the highest quality pieces available or we manufacture them. The Lo-Dapt™ uses brass tipped black oxide set screws and is 304 Stainless Steel.

2014 catalog

gennieshifter.com

Q&A

45


A Way of Doing Business Errors In Packaging If an incorrect item is received due to errors by Gennie Shifter,® that item (if unused and like new) will be exchanged for the proper item. The incorrect item must have been ordered direct from Gennie Shifter® and returned pre-paid within 14 days of the original shipment’s receipt. Shortages reported within 14 days of receipt will be filled by Gennie Shifter.® No claims for incorrect parts or shortages will be addressed after two weeks of the original shipment’s receipt.

Damage Claims Claims for damage, open or concealed, will be inspected by Gennie Shifter; the item must be returned in original package, with invoice and our RMA#, provided by Gennie Shifter (see Wholesale Returns). After a product inspection, Gennie Shifter will advise you of the claim status.

Retail Returns Gennie Shifter® does not sell retail, therefore claims must be directed back to the dealer where item was originally purchased.

Wholesale Returns All returned products must be accompanied by a copy of the original purchase invoice and an RMA#. Shipping charges are non-refundable. All returned products must be in the same condition they were in at the time of sale, as damaged or altered merchandise will not be accepted. All returns are subject to a 20% restocking fee. Products can only be returned within 30 days of the original invoice. No C.O.D. returns.

Back Ordered Items If at the time of an order, a normally stocked item is temporarily out of stock, the item will be placed on back order. The back ordered item will be shipped as soon as possible. Customers will not be charged for back ordered items until the item ships. If you would like to cancel a pending back order, please contact Gennie Shifter® immediately.

Pricing Prices are subject to change without notice. If a price has changed from the listed price, you will be notified at the time of ordering. For the latest prices, please contact your Gennie Shifter® authorized dealer. Confidential pricing is provided separately to dealers.

46 Terms & Conditions

Toll free 877-7 GENNIE

2014 catalog


1-877-7-Gennie 303-623-5789 Express Delivery If you would like your shipment to be shipped Next Day, Second Day, or 3-Day Express, please make this request at the time you place your order. Express Shipping options are available at an additional charge. Your Gennie Shifter sales representative will give you a customized quote to let you know what the total shipping will be for your order. This service is available only for in stock merchandise ordered before 12:00 noon. Express Delivery must be pre-paid.

Payment Accepted methods of payment are as follows: • Money Order • Company Check • Cashier’s Check • Credit Card such as Visa, MasterCard, Discover, and American Express. Please note: An additional charge of $8.50 will be added for C.O.D. orders.

Hours of Operation Monday through Friday • 8:00 AM to 5:00 PM • Rocky Mountain Time. Sorry, we are closed weekends and on legal United States Holidays. Our website, www.GennieShifter.com, is updated daily.

Limited Time Warranty Gennie Shifter® applies a Limited Lifetime Warranty on it’s products. Defects in materials or workmanship under normal use will be handled by Gennie Shifter® directly. To make a warranty claim, you must provide proof of purchase (i.e. original invoice) and an RMA# (call for RMA#). Gennie Shifter® reserves the right to repair or replace the product as it deems necessary. Gennie Shifter® will determine whether the product meets the terms and conditions of the Gennie Shifter® Warranty. Products that have been changed, altered, modified or misused in any way will not be warrantied. Gennie Shifter® reserves the right to refuse warranty coverage according to it’s terms. Product must be returned along with an explanation of the warranty claim to Gennie Shifter,® at the customer’s expense.

Drop Shipments All drop shipments must be paid in full, in advance. There is a $8.50 drop shipment fee.

Dealers Place Orders Online! Visit www.GennieShifter.com and order the Gennie Shifter products you need 24/7.

2014 catalog

gennieshifter.com

Terms & Conditions

47


Since 1982, Gennie Shifter has been manufacturing the highest quality street rod parts. Gennie Shifter prides itself on products that are durable, adjustable, & easy to install. Gennie Shifter is excited to be a part of your project. The Gennie Shifter staff is always happy to answer technical questions about installation, specific applications, & modifications. Please feel free to stop by your authorized dealer to see all of the latest & greatest Gennie Shifter products for your ride. As always, Gennie’s commitment to quality & the best customer service in the industry is part of our efforts in 2014 and beyond. Enjoy looking through the catalog and thank you for choosing the“Original” All-American Gennie Shifter.

301 Bryant Street Denver, CO 80219

www.gennieshifter.com www.gennieknobs.com


Gennieshifter 2014