Page 1

2018 PRODUCT CATALOG Supplies • Registers • Valves • Fire Protection Effective May 1, 2018


KELLER SUPPLY PLUMBING, KELLER-AIR & KELLER SUPPLY’S KITCHEN & BATH SHOWCASE BRANCH LOCATIONS: ALBANY

2550 SE Three Lakes Road Albany, OR 97322 Ph# 541-926-4700

BREMERTON *

LACEY *

BURLINGTON *

LYNNWOOD

ANCHORAGE *

3701 W. Loxie Eagans Blvd. Bremerton, WA 98312 Ph# (Plbg): 360-373-7700 Ph# (K&BS): 360-373-8868

AUBURN *

755 Bennett Road Burlington, WA 98233 Ph# (Plbg): 360-757-6100 Ph# (K&BS): 360-757-7909

8020 Schoon Street Anchorage, AK 99518 Ph# (Plbg): 907-349-0033 Ph# (K&BS): 907-349-0145 1428 15th St. N.W. Auburn, WA 98002 Ph# (Plbg): 253-939-9000 Ph# (K&BS): 253-872-8289

CHICO

BEAVERTON *

CLACKAMAS *

5580 S.W. 107th Ave. Beaverton, OR 97005 Ph# (Plbg): 503-646-3922 Ph# (K&BS)503-646-7658

BELLEVUE - KOHLER STORE 1018 116th Ave NE, Ste 170 Bellevue, WA 98004 Ph# 425-748-8090

2648 Hegan Lane Chico, CA 95928 Ph# 530-343-7100 9760 S.E. Lawnfield Rd. Clackamas, OR 97015 Ph# (Plbg): 503-653-1700 Ph# (K&BS): 503-653-7764

CLACKAMAS - AIR

BELLINGHAM *

13009 S.E. Jennifer St. Bldg. #1 Suite #105 Clackamas, OR 97015 Ph# 503-656-6000

BEND *

680 West Dalton Avenue Coeur d’Alene, ID 83815 Ph# 208-665-7070

1401 Stonegate Way Ferndale, WA 98248 Ph# (Plbg & K&BS): 360-392-8254

COEUR D’ALENE

200 SE Bridgeford, Bldg. #2 Bend, OR 97702 Ph# (Plbg): 541-385-9119 Ph# (K&BS): 541-385-0837

ELLENSBURG

BEND - AIR

EUGENE *

175 S.E. Logsden Street Bend, OR 97702 Ph# 541-323-1020

BILLINGS *

4211 1 st Ave. S. Billings, MT 59101 Ph# (Plbg): 406-245-3191 Ph# (K&BS): 406-256-2296

BOISE *

11857 W. Executive Drive Boise, 10 83713 Ph# (Plbg): 208-323-2200 Ph# (K&BS): 208-323-7904

BOISE - AIR

152 NW 13th Place Meridian, ID 83642 Ph# 208-323-9262

BOZEMAN *

75 Rawhide Ridge Bozeman, MT 59715 Ph# (Plbg): 406-587-4443 Ph# (K&BS): 406-582-7619

BOZEMAN - AIR

70 Timberline Drive Bozeman, MT 59718 Ph# 406-582-5784

2060 Vantage Hwy, Suite 26 Ellensburg, WA 98926 Ph# 509-925-2400 170 Garfield St. Eugene, OR 97402 Ph# (Plbg & K&BS): 541-342-7000

EVERETT *

2924 Chestnut St. Everett, WA 98201 Ph# (Plbg):425-259-0181 Ph# (K&BS): 425-303-1825

FAIRBANKS

3330 Lathrop Street Fairbanks, AK 99701 Ph# 907-452-8888

IDAHO FALLS

230 E. Stanley Street Idaho Falls, ID 83401 Ph# 208-523-8182

KALISPELL

1210 Carpenter Rd. Lacey, WA 98503 Ph# (Plbg):360-491-0550 Ph# (K&BS): 360-491-9767

SEATTLE *

3209 17th Avenue West Seattle, WA 98119 Ph# (Plbg): 206-285-3800 Ph# (K&BS): 206-270-4724

MANTECA

SEATTLE - AIR

MEDFORD

SEATTLE - COMMERCIAL

MISSOULA *

SEQUIM

2024 Crestwood Ave. Manteca, CA 95336 Ph# 209-239-5090 2087 Lars Way Medford, OR 97501 Ph# 541-773-4300 1151 Mount St. Missoula, MT 59801 Ph# (Plbg): 406-721-4411 Ph# (K&BS): 406-721-5208

MONROE

17331 Tye St. S.E., Suite B Monroe, WA 98272 Ph# 360-794-0125

PORTLAND-COMMERCIAL 2881 NE Argyle Street Portland, OR 97211 Ph# 503-232-2800

PORTLAND - KOHLER STORE 1100 NW Glisan Street Portland, OR 97209 Ph# 503-821-7239

PUYALLUP *

16106 - 57th Ave. E. Puyallup, WA 98373 Ph# (Plbg): 253-531-3200 Ph# (K&BS): 253-536-1033

REDDING *

2965 Innsbruck Drive Redding, CA 96003 Ph# (Plbg): 530-226-6100 Ph# (K&BS): 530-226-6071

REDDING - AIR

18315 N.E. 76th Redmond, WA 98052 Ph# 425-881-0668 737 S. Stacy St. Seattle, WA 98134 Ph# 206-340-0800

331 West Pine Street Sequim, WA 98382 Ph# 360-681-8900

SOLDOTNA

35437 K-B Drive Soldotna, AK 99669 Ph# 907-262-7752

SPOKANE *

N. 601 Freya Spokane, WA 99202 Ph# (Plbg & K&BS): 509-534-1541

SUMNER - AIR

2601 142nd Ave E., SUITE A Sumner, WA 98390 Ph# 253-863-9271

TACOMA *

3620 S. Cedar St. Tacoma, WA 98409 Ph# (Plbg): 253-473-1390 Ph# (K&BS): 253-473-1756

VANCOUVER *

5408-C N.E. 88th., Suite A Vancouver, WA 98665 Ph# (Plbg): 360-696-4377 Ph# (K&BS): 360-546-0358

WASILLA *

3055 Crossroads Drive Redding, CA 96003 Ph# 530-722-9688

2120 East Bogard Road Wasilla, AK 99654 Ph# (Plbg): 907-373-0033 Ph# (K&BS): 907-373-0064

REDMOND *

WENATCHEE

460 Ash Road Kalispell, MT 59901 Ph# 406-300-4635

KENNEWICK *

RENTON

* Kitchen & Bath Showcase locations

119 McGhee Road Sandpoint, ID 83864 Ph# 208-263-6750

18503 Highway 99, Unit A Lynnwood,WA 98036 Ph# 425-776-0181

18317 N.E. 76th St. Redmond, WA 98052 Ph# (Plbg): 425-885-9508 Ph# (K&BS) 425-885-4736

6509 W. Deschutes Ave. Kennewick, WA 99336 Ph# (Plbg): 509-736-1000 Ph# (K&BS): 509-735-3565

SANDPOINT

925 Houser Way N. Renton, WA 98057 Ph# 425-226-6881

SALEM

1590 Sunnyview Rd. N.E. Salem, OR 97301 Ph# 503-581-0465

2717 Euclid Ave. Wenatchee, WA 98801 Ph# 509-664-7000

WILLISTON

5056 141st Ave N.W. Williston, ND 58801 Ph# 701-774-1800

YAKIMA

1810 S. 13th St. Union Gap, WA 98901 Ph# 509-248-8800


2018 CAITLIN CATALOG

QUICK REFERENCE CONTENTS

1  1 Toilets and Seats.............................................................. 4-16  2 Lavatories...................................................................... 17-26  3 Kitchen, Lavatory, and Laundry Faucets....................... 28-45  4 Stainless Steel Sinks and Basket Strainers .................. 46-57

2 3 4

 5 Water Supply Connectors .................................................. 58

5

 6 Angle Stops, Ball valves, Stop Valves .......................... 59-74

6

 7 Hose bibs, Sillcocks and Water Hammer Arresters ...... 75-81  8 Grilles, Registers and Diffusers .................................... 82-86

7

 9 Access Doors, Access Panels and Cable Ties.............. 87-89

8

 10 Escutcheons - Flanges and Floor & Ceiling Plates .... 90-96

9

 11 Water Heater Pans and Water Heater Stand............... 97-98

10

 12 Brass and Plastic Tubular.......................................... 99-104  13 Fire Protection Products ........................................ 105-118

11 12 13

Exclusively from Keller Supply

2018 Caitlin Catalog | 1


2018 CAITLIN CATALOG TABLE OF CONTENTS

VITREOUS CHINA Toilets 1.28 Round, Elongated, Elongated ADA............................................................... 4 HET Valve Bowl.................................................................................................... 5 1.60 Round, Elongated, Elongated ADA............................................................... 6 Toilet Seats CTSW250WH - Deluxe Round Toilet Seat............................................................. 7 CTSW300WH - Deluxe Round Toilet Seat w/Soft Close........................................ 8 CTSW2500WH - Deluxe Elongated Toilet Seat........................................................ 9 CTSW3000WH - Deluxe Elongated Toilet Seat w/Soft Close................................... 10 CTSP70-000 - Round Plastic Seat....................................................................... 11 CTSP170-000 - Elongated Plastic Seat............................................................... 12 CTSP1210S00 - Round Plastic Slow Close Seat................................................... 13 CTSP1211S00 - Elongated Plastic Slow Close Seat............................................. 14 CTSP1955CT-000 - Commercial Elongated Plastic Seat...................................... 15 CTSP1955SSCT-000 - Commercial Heavy Duty Elongated Plastic Seat............... 16 Lavatory Oval Drop-In Lavatory....................................................................................... 17 Round Drop-In Lavatory.................................................................................... 18 Oval Undermount Lavatory............................................................................... 19 Rectangle Undermount Lavatory...................................................................... 20 Pedestal Lavatory......................................................................................... 21-22 Commercial 20”X18” Wall Hung Lavatory............................................................................. 23 19”X17” Wall Hung Lavatory............................................................................. 24 Urinal Siphon Jet Quarter Stall.......................................................................... 25 Urinal Washout Half Stall.................................................................................. 26 FAUCETS Kitchen Single Handle CBF150CH & CBF150BN................................................................................ 28-29 CBK100CP..................................................................................................... 30-31 CBK110CP..................................................................................................... 32-33 Kitchen Two Handle CBK220CP..................................................................................................... 34-35 CBK200CP..................................................................................................... 36-37 Lavatory Single Handle CBF100CH & CBF100BN................................................................................ 38-39 Lavatory Two Handle CBL200CP..................................................................................................... 40-41 CBL210CP..................................................................................................... 42-43 Laundry Two Handle CBF200CP..................................................................................................... 44-45 STAINLESS STEEL SINKS Double Bowl SS Sink CS3218UD ........................................................................................................ 46 CS3219UDLD..................................................................................................... 47 CS3221UDOSBL/BR........................................................................................... 48 CS3221UDOSAL/AR........................................................................................... 49 3H 941667 & 4H 941680.................................................................................. 50 STAINLESS STEEL SINKS Single Bowl SS Sink CS2318US.......................................................................................................... 51 CS1815US.......................................................................................................... 52 CS2318US.......................................................................................................... 53 CS2321US.......................................................................................................... 54 3H 942071 & 4H 942073................................................................................... 55 BASKET STRAINERS AS-2112C, AS-2100, AS-2112, AS-2112S................................................................ 56 AS-2004, AS-2102 S304, AS-2600, AS-2003CP....................................................... 57 WATER SUPPLY CONNECTORS Water Supply Connectors Stainless Steel................................................................ 58 BALL STOPS 1/4 Turn Angle Ball Stop (Lead Free)....................................................................... 59 Multi-Turn Angle Ball Stop (Lead Free)................................................................... 60 1/4 Turn Angle/Straight Ball Stop (Lead Free)......................................................... 61 BALL VALVES CPBV-IPS (Leaded).................................................................................................. 62

CPBV-SWT (Leaded)............................................................................................... 63 CPBVLF-IPS (Lead-Free).......................................................................................... 64 CPBVLF-SWT (Lead-Free)........................................................................................ 65 Brass Ball Valves................................................................................................ 66-67 Gas Ball Valves................................................................................................... 68-69 Gas Tee Handle....................................................................................................... 70 VALVES Straight Stop Valves IPS (Threaded End)................................................................. 71 Straight Stop Valves IPS (Sweat End)...................................................................... 72 Stop & Waste Valves (Threaded End)....................................................................... 73 Stop & Waste Valves (Sweat End)............................................................................ 74 SILLCOCKS 3/4” Hose Thread Outlet - Multi Turn....................................................................... 75 HOSE BIBS Standard................................................................................................................. 76 Bent Nose Garden Valves................................................................................... 77-78 Inverted Nose Garden Valve.................................................................................... 79 YARD HYDRANTS - ........................................................................................... 80 ARRESTERS Water Hammer Arrester.......................................................................................... 81 G.R.D.’s Stamped Steel Floor Diffuser.................................................................................. 82 Stamped Steel Toe Space Grille............................................................................... 83 Stamped Steel Two-Way Sidewall/ Ceiling Register................................................ 84 Stamped Steel Return Air Grille.............................................................................. 85 Stamped Steel Return Air Filter Grille..................................................................... 86 ACCESS DOOR/PANELS Universal Steel Access Door.................................................................................... 87 Plastic Access Panel................................................................................................ 88 CABLE TIES - ......................................................................................................... 89 FLANGES Box ........................................................................................................................ 90 Deep ..................................................................................................................... 91 FLOOR & CEILING PLATES Flexible - Chrome .................................................................................................. 92 Flexible - Plastic...................................................................................................... 93 Hinged - Chrome.................................................................................................... 94 Spring - Chrome..................................................................................................... 95 Shallow - Chrome................................................................................................... 96 WATER HEATER ACCESSORIES Pans & Fittings........................................................................................................ 97 Stands.................................................................................................................... 98 TUBULAR Brass Tubular P-Trap .............................................................................................. 99 Brass Flanged Tailpiece..........................................................................................100 Plastic Slip Joint Tubular P-Trap.............................................................................101 Plastic Flanged Tailpiece ......................................................................................102 Plastic Slip Joint Extension Tube............................................................................103 Plastic Branch Tailpiece..........................................................................................104 FIRE PROTECTION PRODUCTS Angle Hose Valve...................................................................................................105 Automatic Ball Drip...............................................................................................106 Cap & Chain...........................................................................................................107 Connection Breakable Caps...................................................................................108 Pendant Cup..........................................................................................................109 Reducers................................................................................................................110 Round Extension Piece..........................................................................................111 Round Identification Plate.....................................................................................112 Sight Glass.............................................................................................................113 Single Clapper 2-Way............................................................................................114 Spear Head Capcity Storage Cabinet......................................................................115 Standard Skirt Chrome..........................................................................................116 Three-Way Gauge Valve.........................................................................................117 Two Pieces Reccessed Canopy................................................................................118

Exclusively from Keller Supply

2018 Caitlin Catalog | 3


VITREOUS CHINA - TOILET 1.28GPF, HET WATER CLOSET

ROUND / ELONGATED / ADA

1

SPECIFICATIONS: * 0342 * 0343 * 0347 * 1342 * 1310 * 1314

Bowl Round Front - Wt. 19.7kg Bowl Elongated Front - Wt. 21.3kg Bowl ADA - Wt. 22.4kg Tank 12” Rough In - Wt. 14.5kg Tank 10” Rough In - Wt. 13kg Tank 14” Rough In - Wt. 16.2kg

FEATURES:

• • • • • • • •

2” Glazed Trapway 16-½” Comfortable Chair Height Bowls Meets ADA Requirements 1.28 GPF, One Flush Every Time Standard Seat Installations, (Sold Separately) HET, High Efficiency Toilet Meets EPA, Watersense Program FET3 Technology, 3” Flush Valve

COLOR SPECIFICATIONS:

* 01 White * 02 Bone * 03 Biscuit

0342

0343

0347

1342 12” 1342 12” 1342 12” _______________________________ A _______________________________ 28-7/8” 28-7/8” 29-1/2” B _______________________________ 17-1/2” 17-1/2” 17-1/2” C _______________________________ 16-1/2” 18-1/2” 18-1/2” D _______________________________ 8-3/8” 8-3/8” 8-3/8” E _______________________________ 16-1/2” 16-1/2” 17” F _______________________________ 28-1/4” 30-1/4” 30-1/4” R _____________________ 12” 12” 12”

0342

0343

0347

1310 10” 1310 10” 1310 10” _______________________________ D _______________________________ 6-3/4” 6-3/4” 6-3/4” F _______________________________ 26-1/4” 28-1/4” 28-1/4” R

10”

10”

10”

0342

0343

0347

1314 14” 1314 14” 1314 14” _______________________________ D _______________________________ 9-1/2” 9-1/2” 9-1/2” F _______________________________ 30-1/4” 32-1/4” 32-1/4” R 14” 14” 14”

Water Surface Seal Trapway

4 | 2018 Caitlin Catalog

Exclusively from Keller Supply

7-5/8” * 6-1/4” 2-1/4” 2”


VITREOUS CHINA - COMMERCIAL HET VALVE BOWL

ELONGATED / ADA LESS THEN 1.28GPF WATER CLOSET SPECIFICATIONS:

684554 * 7501 Elongated Front 684556 * 7502 ADA Bowl Elongated Front

FEATURES:

• • • • • • • • • •

2” Fully Glazed Trapway 1-½ “ Top Inlet Spud Included Elongated Bowl Meets ADA Requirements Het, High Efficiency Toilet 20% Less Water Usage Then 1.6 GPF Valve Bowls Less Then 4.8LPF / 1.28 GPF Standard Seat Installations (Sold Separately) Siphon Jet Technology Meets AMSE A112.19.2, CSA B45

COLOR SPECIFICATIONS:

*01 White

Recommended working pressure between 25 and 80 psi. Fixture only, carrier, flushometer & seat not included Meets the Americans Disabilities Act guidelines and ANSI A11.17.1 when installed to 17” height from finished floor.

Water Surface Seal Trapway

Exclusively from Keller Supply

12-1/4” * 11-1/4” 2-1/2” 2”

2018 Caitlin Catalog | 5

1


VITREOUS CHINA - TOILET

1.60GPF / 6.0LPF, LOW CONSUMPTION ROUND / ELONGATED ADA

1

SPECIFICATIONS:

673539 0612 Bowl Round Front - Wt. 18.25kg 673544 0613 Bowl Elongated Front - Wt. 19.50kg 673548 0614 Bowl ADA Elongated Front - Wt. 21.25kg

OPTIONS:

* 1210 Tank 10” Rough In - Wt. 13.25kg * 1212 Tank 12” Rough In - Wt. 13.75kg * 1214 Tank 14” Rough In - Wt. 14.00kg

FEATURES:

• • • • •

2” Fully Glazed Trapway Large Water Surface Area Pilot Valve Technology FET2 System 10” ,12” and 14” Rough In Tanks Available

COLOR SPECIFICATIONS:

0612

0613

0614

* 01 White * 02 Bone * 03 Biscuit

1212 12” 1212 12” 1212 12” _______________________________ A _______________________________ 29-3/4” 29-3/4” 29-3/4” B _______________________________ 15-3/4” 15-3/4” 15-3/4”

C _______________________________ 16-1/2” 18-1/2” 18-1/2” D _______________________________ 8-1/2” 8-1/2” 8-1/2” E _______________________________ 15” 15” 17” F _______________________________ 28-1/2” 29-3/8” 29-1/2” R _______________________________ 12” 12” 12” G _______________________________ 18-3/8” 18-3/8” 18-5/8” H _______________________________ 9-1/16” 9-1/16” 9”

1210 10” 1210 10” 1210 10”

D _______________________________ 6-1/8” 6-1/8” 6-1/4” F _______________________________ 26-1/2” 27-3/8” 27-5/8” R

10”

10”

10”

1214 14” 1214 14” 1214 14”

D _______________________________ 9-5/8” 9-5/8” 9-3/4” F _______________________________ 30-3/8” 31-3/8” 31-5/8” R

14”

14”

14” Water Surface Seal Trapway

6 | 2018 Caitlin Catalog

7/8” * 5/8” 2-1/4” 2”

Exclusively from Keller Supply


TOILET SEATS

ROUND

DELUXE WITH PLASTIC EZ CLEAN HINGES

1

CTSW250-WH 813319

COLOR: SIZE: MATERIAL: STYLE:

White BUMPERS: Round HINGES: Molded Wood FASTENERS: Closed Front with Cover

Exclusively from Keller Supply

Six Non-Corrosive Plastic EZ Clean Hinges Non-Corrosive Plastic Bolts, Plastic Wing Nuts and FPVC Shims

2018 Caitlin Catalog | 7


TOILET SEATS

ROUND

DELUXE WITH SOFT CLOSE HINGES

1

Non-Corrosive Plastic EZ Clean Hinges

CTSW300-WH 813321

COLOR: SIZE: MATERIAL: STYLE:

White BUMPERS: Round HINGES: Molded Wood FASTENERS: Closed Front with Cover

8 | 2018 Caitlin Catalog

Six Non-Corrosive Plastic EZ Clean Hinges Non-Corrosive Plastic Bolts, Plastic Wing Nuts and FPVC Shims

Exclusively from Keller Supply


TOILET SEATS

ELONGATED

DELUXE WITH PLASTIC EZ CLEAN HINGES

1

CTSW2500-WH 813328

COLOR: SIZE: MATERIAL: STYLE:

White BUMPERS: Elongated HINGES: Molded Wood FASTENERS: Closed Front with Cover

Six Non-Corrosive Plastic EZ Clean Hinges Non-Corrosive Plastic Bolts, Plastic Wing Nuts and FPVC Shims

Exclusively from Keller Supply

2018 Caitlin Catalog | 9


TOILET SEATS

ELONGATED

DELUXE WITH SOFT CLOSE HINGES

1

Non-Corrosive Plastic EZ Clean Hinges

CTSW3000-WH 813331

COLOR: SIZE: MATERIAL: STYLE:

White BUMPERS: Elongated HINGES: Molded Wood FASTENERS: Closed Front with Cover

10 | 2018 Caitlin Catalog

Six Non-Corrosive Plastic EZ Clean Hinges Non-Corrosive Plastic Bolts, Plastic Wing Nuts and FPVC Shims

Exclusively from Keller Supply


PLASTIC TOILET SEATS

ROUND

Toilet ToiletSeat Seat

GL100EWH

CTSP70-000

5-1/2” (1405-1/2” mm) (140 mm) 1-5/8” (42 mm)

Round Economy Wood Seat Plastic Seat bowls • Round Fits round front toilet Fits round front toilet bowls • •Economy design • Polypropylene front seat with cover • To p mounted hingeclosed with plastic cover Top mounted with plastic hardware • •Molded wood seathinge with cover Available white • •Available ininwhite

5-1/2” (140 mm)

5-1/2” (1405-1/2” mm) (140 mm)

16-2/3” (423.3 mm) 16-2/3” (423.3 mm)

16-1/15” (408.1 mm) 16-1/15” (408.1 mm)

16-1/2” (419 mm) 9-1/2” (241.3 mm) 9-1/2” (241.3 mm) 10” (253 mm)

8-5/8” (220 mm)

8-1/2” (215.9 mm) 8-1/2” (215.9 mm) 14-2/3” (372.5 mm) 14-2/3” (372.5 mm)

1-9/16” (40 mm)

1

13-1/15” (423.3 mm) 13-1/15” (423.3 mm)

14” (356 mm)

P.O. Box 70 . Fort Worth, Texas 76101 . 877-709-2227 . www.morsco.com

Exclusively from Keller Supply

2018 Caitlin Catalog | 11


PLASTIC TOILET SEATS

ELONGATED

1

Toilet ToiletSeat Seat

GL100EWH

Round Economy Wood Seat FitsElongated round front Plastic toilet bowls Seat Elongated Plastic Seat • Economy design • Fits elongated front toilet bowls • To p mounted hinge with plastic cover • Polypropylene closed front seat with cover • Molded woodmounted seat with cover • Top hinge with plastic hardware • Available in white • Available in white

CTSP170-000•

5-1/2” (140 mm)

1-3/4” (476.3 mm) 5-1/2” (1405-1/2” mm) (140 mm)

5-1/2” (1405-1/2” mm) (140 mm) 18-3/4” (466.3 mm)

16-2/3” (423.3 mm) 16-2/3” (423.3 mm)

16-1/15” (408.1 mm) 16-1/15” (408.1 mm)

11-1/3”9-1/2” mm) (287.8 (241.3 mm) 9-1/2” (241.3 mm)

8-3/4” (222.3 mm)

8-1/2” (215.9 mm) 8-1/2” (215.9 mm) 14-2/3” (372.5 mm) 14-2/3” (372.5 mm)

13-1/15” (423.3 mm) 13-1/15” (423.3 mm) 13-3/4” (349.3 mm)

1-1/2” (38.1 mm)

P.O. Box 70 . Fort Worth, Texas 76101 . 877-709-2227 . www.morsco.com

12 | 2018 Caitlin Catalog

Exclusively from Keller Supply


PLASTIC TOILET SEATS

ROUND

Toilet ToiletSeat Seat

GL100EWH

Round Economy Wood Seat Round Close Seat Round PlasticSlow Slow Close Seat round frontPlastic toilet bowls • Fits round front toilet bowls • Economy design • Polypropylene closed cover front seat with cover • To p mounted hinge with plastic • Slow close design • Molded wood seat with cover • Top mounted hinge with easy clean • Available in white hardware • Available in white

CTSP1210S00• Fits

5-1/2” (1405-1/2” mm) 2” (56 mm) (140 mm)

5-1/2” (140 mm)

16-1/2” (419.1 mm)

5-1/2” (1405-1/2” mm) (140 mm)

16-2/3” (423.3 mm) 16-2/3” (423.3 mm)

16-1/15” (408.1 mm) 16-1/15” (408.1 mm)

9-1/2” (241.3 mm) 9-1/2” (241.3 mm) 10-1/4” (260.4 mm)

8-1/4” (207 mm)

8-1/2” (215.9 mm) 8-1/2” (215.9 mm) 14-2/3” (372.5 mm) 14-2/3” (372.5 mm)

13-1/15” (423.3 mm) 13-1/15” (423.3 mm)

1-3/4” (45 mm)

14” (361 mm)

P.O. Box 70 . Fort Worth, Texas 76101 . 877-709-2227 . www.morsco.com

Exclusively from Keller Supply

2018 Caitlin Catalog | 13

1


PLASTIC TOILET SEATS

ELONGATED

1 Toilet

Seat Toilet Seat

GL100EWH

Round Economy Wood Seat Plastic Slow Close Seat Fits Elongated round front toilet bowls • Fits elongated front toilet bowls • Economy design • Polypropylene closed front seat with cover • To p mounted hinge with plastic cover • Slow close design • Molded wood seat with cover • Topin mounted • Available white hinge with easy clean hardware • Available in white

CTSP1211S00•

UJ PLQ≤ 8-3/4” (224 mm) EOOQ= ããF

2” O≤ (56 mm)ã F 5-1/2” ERS=ã (1405-1/2” mm) (140 mm)

5-1/2” RJ NLO≤ (140 =mm) ENQM ããF

5-1/2” (1405-1/2” mm) (140 mm)

16-2/3” (423.3 mm) 16-2/3” (423.3 mm)

16-1/15” (408.1 mm) 16-1/15” (408.1 mm)

9-1/2” (241.3 mm) 9-1/2” (241.3 mm)

18” (455 mm)

18-1/2” (472 mm)

8-1/4” UJ NLQ≤ (207T= mm) EOM ããF

12” (304.8 mm)

8-1/2” (215.9 mm) 8-1/2” (215.9 mm) 14-2/3” (372.5 mm) 14-2/3” (372.5 mm)

13-1/15” (423.3 mm) 13-1/15” (423.3 mm)

14” NQ≤ (361 mm) EPSN=ã ãF

NJ1-3/4” PLQ≤ (45 mm) EQR=ã ãF

P.O. Box 70 . Fort Worth, Texas 76101 . 877-709-2227 . www.morsco.com

14 | 2018 Caitlin Catalog

Exclusively from Keller Supply


PLASTIC TOILET SEATS

ELONGATED

CTSP1955CT-000

Commercial Seat CommercialElongated ElongatedPlastic Plastic Seat • Fits elongated front toilet bowls • Self-sustaining stainless steel hinge • Open front seat without cover • Available in white

1-1/8” (29.8 mm )

5-1/2” (140 mm)

3-1/4” (83 mm)

18-1/2” (467 mm ) 7-7/8” (200 mm)

3-1/2” (88.7 mm ) 1” (25.5 mm ) 14” (355.6 mm)

Exclusively from Keller Supply

2018 Caitlin Catalog | 15

1


PLASTIC TOILET SEATS

ELONGATED

1

Toilet Seat

CTSP1955SSCT-000 GL100EWH GL100EWH

2-1/2” (64.5 mm)

Commercial Heavy Duty Elongated Plastic Seat • Fits elongated front toilet bowls Round Economy Wood Seat • Self-sustaining stainless steel hinge Economy Woodtoilet Seat • Round Fits round front bowls • Open front seat without cover Fits round front toilet bowls • •Economy design • Heavy duty commercial design • pEconomy • To mounteddesign hinge with plastic cover • Available in white To p mounted hinge with plastic cover • •Molded wood seat with cover Molded wood seat with cover • •Available in white • Available in white

5-1/2” (140 mm)

5-1/2” (1405-1/2” mm) (140 mm)

5-1/2” (1405-1/2” mm) (140 mm)

3” (76 mm)

16-2/3” (423.3 mm) 16-2/3” (423.3 mm)

16-1/15” (408.1 mm) 16-1/15” (408.1 mm)

18-1.2” (467 mm)

9-1/2” (241.3 mm) 9-1/2” (241.3 mm)

8-1/2” (215.9 mm) 8-1/2” (215.9 mm) 14-2/3” 1-1/4” (372.5 mm) 14-2/3” (30.6 (372.5 mm) mm )

7-3/4” (197 mm)

3” (76 mm)

14” (355.6 mm )

.

.

16 | 2018 Caitlin Catalog

.

Exclusively from Keller Supply

13-1/15” (423.3 mm) 13-1/15” (423.3 mm)


VITREOUS CHINA - LAVATORY OVAL DROP-IN

20-1/4” X 17-1/4” FEATURES:

95938

Specifications

• Vitreous China • Wide Tapered Rim • Complies with ADA Requirements for Accessibility • Every Lavatory Inspected for Sure Fit Installation • Concealed Overflow • Available with Single Hole, 4” or 8” Faucet Centers • Available in White, Bone and Biscuit • AAA Grade Quality Glazed Finish • Five Year Product Warranty • Meets ASME A112.19.2-2003 & IAPMO/ANSI UPC 1-2003 • Meets CSA B45.0-02, B45.1-02 & B45S1-04

Model No. Description Approx Wt. Gross Cu. Ft. _____________________________________________________ L1290

Victor 20-1/4” x 17-1/4” 16.97 lbs. Oval Drop-In Lavatory

0.883 cu. ft.

Exclusively from Keller Supply

2018 Caitlin Catalog | 17

2


VITREOUS CHINA - LAVATORY ROUND DROP-IN

19” FEATURES:

2

99963

Specifications

• Vitreous China • Wide Tapered Rim • Complies with ADA Requirements for Accessibility • Concealed Overflow • Every Lavatory Inspected for Sure Fit Installation • Available with Single Hole, 4” or 8” Faucet Centers • Available in White, Bone and Biscuit • AAA Grade Quality Glazed Finish • Five Year Product Warranty • Meets ASME A112.19.2-2003 & IAPMO/ANSI UPC 1-2003 • Meets CSA B45.0-02, B45.1-02 & B45S1-04

Model No. Description Approx Wt. Gross Cu. Ft. _____________________________________________________ L1390

Reo 19” Round Drop-In Lavatory

18 | 2018 Caitlin Catalog

16.97 lbs.

1.060 cu. ft.

Exclusively from Keller Supply


VITREOUS CHINA - LAVATORY OVAL UNDERMOUNT

19.8” X 17.7”

FEATURES:

• Concealed Front Overflow • Includes Installation Clips • Available in White, Bone and Biscuit • AAA Grade Quality Glazed Finish • Five Year Product Warranty • Meets ASME A112.19.2-2003 & IAPMO/ANSI UPC 1-2003 • Meets CSA B45.0-02, B45.1-02 & B45S1-04 8969

Specifications Model No. Description Approx Wt. Gross Cu. Ft. _____________________________________________________ L1560

Bristol 19.8” Oval Undermount Lavatory

17.64 lbs.

1.624 cu. ft.

Exclusively from Keller Supply

2018 Caitlin Catalog | 19

2


VITREOUS CHINA - LAVATORY RECTANGULAR UNDERMOUNT

20-7/8” X 14-1/2” FEATURES:

2

427158

Specifications

• Concealed Front Overflow • Includes Installation Clips • Available in White, Bone and Biscuit • AAA Grade Quality Glazed Finish • Five Year Product Warranty • Compliant with UPC, National Plumbing Code of Canada, IPC & IRC • Compliant with ASME A112.19.2-2008/CSA B45.1 2008 Certification Standards • Certificate of Listing Filed with ICC Evaluation Service

Model No. Description Approx Wt. Gross Cu. Ft. __________________________________________________ L1506

Marsala 20-7/8” x 14-1/2” 19.80 lbs. Rectangle Undermount

1.534 cu. ft.

NOTE: Rough-in measurements may vary 1/4” (+ -)

20 | 2018 Caitlin Catalog

Exclusively from Keller Supply


VITREOUS CHINA - LAVATORY PEDESTAL

21-5/8” X 18-5/16” X 36-7/16” FEATURES:

• Full Luxury Comfort Height • Includes Mounting Kit • Concealed Overflow • Available with Single Hole, 4” or 8” Faucet Centers • Available in White, Bone and Biscuit • AAA Grade Quality Glazed Finish • Five Year Product Warranty • Compliant with UPC, National Plumbing Code of Canada, IPC & IRC • Compliant with ASME A112.19.2-2008/CSA B45.1-2008 Certification Standards • Certificate of Listing Filed with ICC Evaluation Service

Specifications Model No. Description Approx Wt. Gross Cu. Ft. __________________________________________________ Classic II 21-5/8”X18-5/16” 24.20 lbs. 2.099 cu. ft. 142182 L802 __________________________________________________ Pedestal Lavatory Top 143847 P802

Exclusively from Keller Supply

Classic II Pedestal Base

17.60 lbs.

0.954 cu. ft.

2018 Caitlin Catalog | 21

2


VITREOUS CHINA - LAVATORY

PEDESTAL

21-5/8” X 18-5/16” X 36-7/16”

2

22 | 2018 Caitlin Catalog

Exclusively from Keller Supply


VITREOUS CHINA - COMMERCIAL WALL HUNG LAVATORY

20” X 18” SPECIFICATIONS:

795227 L2016-4 Available in 4” Centers 795240 L2018-8 Available in 8” Centers

FEATURES:

• • • •

Available in 4 and 8” Faucet Centers Complies with ADA Requirements High Back Splash Concealed Arm Carrier Connection (Arm Carriers Not Included) • Includes Wall Hanger • Concealed Front Overflow • Wt. 15.85kg

COLOR SPECIFICATIONS:

* White

Exclusively from Keller Supply

2018 Caitlin Catalog | 23

2


VITREOUS CHINA - COMMERCIAL WALL HUNG LAVATORY

19” X 17” SPECIFICATIONS:

795243 L1917-4 Available in 4” Faucet Centers 795255 L1917-8 Available in 8” Faucet Centers

2

FEATURES:

• • • • •

Complies with ADA Requirements Anti Splash Rim Includes Wall Hanger Concealed Front Overflow Wt. 13.75kg

COLOR SPECIFICATIONS:

* White

24 | 2018 Caitlin Catalog

Exclusively from Keller Supply


VITREOUS CHINA - COMMERCIAL URINAL SIPHON JET QUARTER STALL

SPECIFICATIONS:

* 7100 * .01 White

2

FEATURES:

• • • • • • • • • •

Low Consumption HEU High Efficiency Meets ANSI A112.19.2 At .5-1.0 GPF Siphon Jet Flush Action Integral Flushing Rim Installed 3/4 Top Spud Includes 2” N.P.T Inside Thread Outlet Easy To Install Wall Hangers (2 Included) Fixture Only (Flush Valve Not Included) Elongated 14” Rim

Recommended working pressure between 25 and 80 psi. Meets the Americans Disabilities Act guidelines and ANSI A11.17.1 when installed to 17” height from finished floor.

Exclusively from Keller Supply

2018 Caitlin Catalog | 25


VITREOUS CHINA - COMMERCIAL URINAL WASHOUT HALF STALL

SPECIFICATIONS:

* 7102 * .01 White

2

FEATURES:

• • • • • • • • •

Meets ANSI A112.19.2 At .5-1.0 GPF Low Consumption Washout Flush Action Installed 3/4 Top Spud Extended Privacy Shields Includes 2” N.P.T Inside Thread Outlet Easy To Install Wall Hangers (2 Included) Fixture Only (Flush Valve Not Included) Elongated 14” Rim

Recommended working pressure between 25 and 80 psi. Meets the Americans Disabilities Act guidelines and ANSI A11.17.1 when installed to 17” height from finished floor.

Bardon™ 1/8th GPF

High Efficiency Urinal (HEU) K-4904-ET

). with WaterSense

14-1/8" (359 mm)

For complete listing of available colors, go to kohler.com.

Codes/Standards

ASME A112.19.2/CSA B45.1 ADA ICC/ANSI A117.1 EPA WaterSense® TAS

KOHLER ® One-Year Limited Warranty See website for detailed warranty information.

| 2018Specification Product 26 Caitlin Catalog

Urinal shall be 26-7/8" (683 mm) in height, 18" (457 mm) in width, and 14-1/8" (359 mm) in depth. Urinal shall be made of vitreous china. Urinal shall have washout flushing action. Urinal shall have 3/4" top spud and 14-1/8" (359 mm ) extended

Exclusively from Keller Supply


KITCHEN FAUCETS KITCHEN FAUCETS CBF150CH & CBF150BN

CBF150CH & CBF150BN

SINGLE-HANDLE PULL-OUT KITCHEN FAUCET SINGLE-HANDLE PULL-OUT KITCHEN FAUCET FEATURES: Product

3

• • • • • • • • • • •

Features

Ceramic Disc Cartridge Ceramic Disc Cartridge Solid Brass Waterways with Metal Housing Solid Brass Waterways With Metal Housing 1.8GPM Water Saving Aerator 1.8 GPM Water Efficient Aerator Max Flow Rate 1.8GPM (6.8LPM) at 60PSI Max at 60 PSI SwingFlow SpoutRate with 1.8GPM(6.8LPM) Pullout Spray and Hose Swing Spout with Pullout Spray and Hose Metal Lever Handle Metal Handle CopperLever Tube Connections Copper Tube ADA Compliant Connections ADA MeetsCompliant ASME/ANSI A112.18.1M Meets ASME NSF/ANSI Std.61A112.18.1 Compliant NSF/ANSI Std.61 CUPC/IAPMO Listed compliant CUPC/IAPMO listed

Model Numbers 918354 918358

Polished Chrome Finish Brushed Nickel Finish

NSF/ANSI 61

Exclusively from Keller Supply 28 | 2018 Caitlin Catalog 1 | 2015 Caitlin Catalog

Exclusively from Keller Supply

0315


KITCHEN FAUCETS

CBF150CH & CBF150BN

SINGLE-HANDLE PULL-OUT KITCHEN FAUCET OPERATION & MAINTENANCE

3

Exclusively from Keller Supply

2018 Caitlin Catalog | 29


KITCHEN FAUCETS

CBK100CP

SINGLE-HANDLE FEATURES:

3

571445

• • • • • • • • • •

Washerless Design Solid Brass Waterways with Metal Housing 1.75GPM Water Saving Aerator 8” Centerset Metal Handle Chrome Finish ADA and UFAS Compliant Meets ASME/ANSI A112.18.1M NSF/ANSI Std.61 Compliant CUPC/IAPMO Listed

SPECIFICATIONS:

30 | 2018 Caitlin Catalog

Exclusively from Keller Supply


KITCHEN FAUCETS CBK100CP

SINGLE-HANDLE OPERATION & MAINTENANCE

3

Exclusively from Keller Supply

2018 Caitlin Catalog | 31


KITCHEN FAUCETS CBK110CP

SINGLE-HANDLE WITH CHROME SIDE SPRAY FEATURES:

3

571448

• • • • • • • • • •

Washerless Design Solid Brass Waterways with Metal Housing 1.75GPM Water Saving Aerator Metal Handle Chrome Finish ADA and UFAS Compliant Meets ASME/ANSI A112.18.1M NSF/ANSI Std.61 Compliant CUPC/IAPMO Listed Chrome Side Spray

SPECIFICATIONS:

32 | 2018 Caitlin Catalog

Exclusively from Keller Supply


KITCHEN FAUCETS CBK110CP

SINGLE-HANDLE WITH CHROME SIDE SPRAY

OPERATION & MAINTENANCE

3

Exclusively from Keller Supply

2018 Caitlin Catalog | 33


KITCHEN FAUCETS CBK220CP

TWO-HANDLE WITH CHROME SIDE SPRAY FEATURES:

3

176407

• • • • • • • • • • •

Washerless Design Solid Brass Waterways with Metal Housing 1.75GPM Water Saving Aerator 8” Centerset Acrylic Handle Chrome Finish ADA and UFAS Compliant Meets ASME/ANSI A112.18.1M NSF/ANSI Std.61 Compliant CUPC/IAPMO Listed Chrome Side Spray

SPECIFICATIONS:

34 | 2018 Caitlin Catalog

Exclusively from Keller Supply


KITCHEN FAUCETS CBK220CP

TWO-HANDLE WITH CHROME SIDE SPRAY

OPERATION & MAINTENANCE

3

Exclusively from Keller Supply

2018 Caitlin Catalog | 35


KITCHEN FAUCETS

CBK200CP

TWO-HANDLE FEATURES:

• • • • • • • • •

3

Washerless Design Solid Brass Waterways with Metal Housing 1.75GPM Water Saving Aerator 8” Centerset Acrylic Handle Chrome Finish Meets ASME/ANSI A112.18.1M NSF/ANSI Std.61 Compliant CUPC/IAPMO Listed

177968

SPECIFICATIONS:

36 | 2018 Caitlin Catalog

Exclusively from Keller Supply


KITCHEN FAUCETS CBK200CP

TWO-HANDLE

OPERATION & MAINTENANCE

Exclusively from Keller Supply

2018 Caitlin Catalog | 37

3


LAVATORY FAUCETS LAVATORY FAUCETS

CBF100CH CBF100BN CBF100CH & & CBF100BN SINGLE-HANDLE LAVATORY FAUCET SINGLE-HANDLE FEATURES:

3

• • • • • • • • • •

Washerless Design Washerless Designwith Metal Housing Solid Brass Waterways Solid Brass With Metal Housing 1.2GPM WaterWaterways Efficient Aerator 1.2 GPM Water Efficient Aerator Max Flow Rate 1.2GPM (6.8LPM) at 60PSI Max Flow Rate 1.2GPM(6.8LPM) at 60 PSI Pop-up Metal Drain Assembly Pop-up Metal Drain Assembly Metal Lever Handle Metal Lever Handle ADA Compliant ADA Compliant Meets ASME A112.18.1 Meets ASME A112.18.1 NSF/ANSI Std.61 Compliant NSF/ANSI Std.61 compliant CUPC/IAPMO Listed CUPC/IAPMO listed

Model Numbers 918347 918350

Polished Chrome Finish Brushed Nickel Finish

NSF/ANSI 61

Exclusively from Keller Supply 0315

| 2015 138 | 2018Caitlin CaitlinCatalog Catalog

Exclusively from Keller Supply


LAVATORY FAUCETS

CBF100CH & CBF100BN

SINGLE-HANDLE

OPERATION & MAINTENANCE

3

Exclusively from Keller Supply

2018 Caitlin Catalog | 39


LAVATORY FAUCETS CBL200CP

TWO-HANDLE FEATURES:

3

571421

• • • • • • • • • •

Washerless Design Solid Brass Waterways with Metal Housing 1.5GPM Water Saving Aerator 4” Centerset Pop-Up Metal Drain Assembly Acrylic Handle Chrome Finish Meets ASME/ANSI A112.18.1M NSF/ANSI Std.61 Compliant CUPC/IAPMO Listed

SPECIFICATIONS:

40 | 2018 Caitlin Catalog

Exclusively from Keller Supply


LAVATORY FAUCETS CBL200CP

TWO-HANDLE

OPERATION & MAINTENANCE

3

Exclusively from Keller Supply

2018 Caitlin Catalog | 41


LAVATORY FAUCETS CBL210CP

TWO-HANDLE FEATURES:

3

571430

• • • • • • • • • •

1/4 -Turn Washerless Design Solid Brass Waterways with Metal Housing 1.5GPM Water Saving Aerator 4” Centerset Pop-Up Metal Drain Assembly Metal Handle Chrome Finish Meets ASME/ANSI A112.18.1M NSF/ANSI Std.61 Compliant CUPC/IAPMO Listed

SPECIFICATIONS:

42 | 2018 Caitlin Catalog

Exclusively from Keller Supply


LAVATORY FAUCETS CBL210CP

TWO-HANDLE

OPERATION & MAINTENANCE

3

Exclusively from Keller Supply

2018 Caitlin Catalog | 43


LAUNDRY TRAY FAUCET CBF200CP

TWO-HANDLE WITH 8” SPOUT FEATURES:

• • • • • • • • •

3

1/4 -Turn Washerless Design Solid Brass Waterways with Metal Housing 1.5GPM Water Saving Aerator 4” Centerset Metal Handle Chrome Finish Meets ASME/ANSI A112.18.1M NSF/ANSI Std.61 Compliant CUPC/IAPMO Listed

80663

SPECIFICATIONS:

44 | 2018 Caitlin Catalog

Exclusively from Keller Supply


LAUNDRY TRAY FAUCET CBF200CP

TWO-HANDLE WITH 8” SPOUT

OPERATION & MAINTENANCE

3

Exclusively from Keller Supply

2018 Caitlin Catalog | 45


STAINLESS STEEL SINKS UNDERMOUNT DOUBLE BOWL

CS3218UD DIMENSION: 32-3/8” X 18-1/8” X 9” THICKNESS: 16 GAUGE FINISH: SATIN

4

STRAINER NOT INCLUDED

560201

Scratch and stain resistant commercial-grade premium satin brush finish guarantees durability and lasting shine Sound deaden pad undercoated insulation prevents from condensation and reduces noise while sink is in use Clips, instruction manual and cut out template included Items required for assembly screwdriver and silicone

46 | 2018 Caitlin Catalog

Exclusively from Keller Supply


STAINLESS STEEL SINKS

UNDERMOUNT LOW LEVEL DOUBLE BOWL

CS3219UDLD MATERIAL: STAINLESS STEEL DIMENSION: 32-1/4” X 18-7/8” X 9” THICKNESS: 18 GAUGE FINISH: SATIN

4 STRAINER NOT INCLUDED

614349

Scratch and stain resistant commercial-grade premium satin brush finish guarantees durability and lasting shine Sound deaden pad undercoated insulation prevents from condensation and reduces noise while sink is in use Clips, instruction manual and cut out template included Items required for assembly screwdriver and silicone

Exclusively from Keller Supply

2018 Caitlin Catalog | 47


STAINLESS STEEL SINKS UNDERMOUNT DOUBLE BOWL

CS3221UDOSBL/BR 560204 - LEFT 560213 - RIGHT DIMENSION: 31-3/4” X 20-5/8” X 9” / 7” THICKNESS: 16 GAUGE FINISH: SATIN

4

560204

STRAINER NOT INCLUDED

Scratch and stain resistant commercial-grade premium satin brush finish guarantees durability and lasting shine Sound deaden pad undercoated insulation prevents from condensation and reduces noise while sink is in use Clips, instruction manual and cut out template included Items required for assembly screwdriver and silicone

560213

48 | 2018 Caitlin Catalog

Exclusively from Keller Supply


STAINLESS STEEL SINKS

UNDERMOUNT DOUBLE BOWL

CS3221UDOSAL/AR 581271 - LEFT 581272 - RIGHT MATERIAL: STAINLESS STEEL DIMENSION: 31-1/2” X 20-1/2” X 9” / 7” THICKNESS: 16 GAUGE FINISH: SATIN

STRAINER NOT INCLUDED

581271

Scratch and stain resistant commercial-grade premium satin brush finish guarantees durability and lasting shine Sound deaden pad undercoated insulation prevents from condensation and reduces noise while sink is in use Clips, instruction manual and cut out template included Items required for assembly screwdriver and silicone

581272

Exclusively from Keller Supply

2018 Caitlin Catalog | 49

4


STAINLESS STEEL SINK

Double Bowl Stainless Steel

TOPMOUNT DOUBLE BOWL

3H 941667 4H 941680

• •• • • • ••• • • •• •• • • • • • • • • • • • • • • • • • Topmount Double Bowl Material: Stainless Steel

DIMENSION: 33” X 22”•X••8”• • • ••• • • •• •• • • • • • • • • • • THICKNESS: 18 GAUGE Topmount 33” x 22”Double x 8” Bowl FINISH:Dimension: SATIN

4

Material: Stainless Steel

Drain Opening: 3-1/2”

Dimension: 33” x 22” x 8”

Thickness: 18 Gauge

STRAINER NOT INCLUDED **Strainer not included**

Drain Opening: 3-1/2”

Scratch and stain resistant commercial-grade premium satin brush finish SatinThickness: 18 Gauge guarantees durability and lastingFinish: shine **Strainer not included**

Finish: Sound deaden pad undercoated insulation prevents from condensation and Satin reduces noise while sink is in use Scratch and stain resistant comm

premium satin brush guara Scratch andfinish stain resistant and lasting shine premium satin brush finish

Clips, instruction manual and cut out template included Items required for assembly screwdriver and silicone 203mm (8.0”)

203mm (8.0”)

Sound deaden pad undercoated Sound deaden pad underc prevents from condensation and prevents from condensatio while sink iswhile in use sink is in use

838mm (32.99”)

838mm (32.99”)

101.6mm (4.0”)

φ38mm (φ1.5”)

356mm (14.02”)

559mm (22.01”)

559mm (22.01”)

φ91mm (φ3.5”)

356mm (14.02”)

50 | 2018 Caitlin Catalog

Items required for assembl silicone required for assembly screw

Items silicone 406mm (15.98”)

406mm (15.98”)

φ91mm (φ3.5”)

Clips, instruction manual Clips, instruction manual and cuta included included

101.6mm (4.0”)

φ38mm (φ1.5”)

and lasting shine

Model 941667 33"x22" 3H 8.0" 18 GA 2B 941680 33"x22" 4H 8.0" 18 GA 2B 356mm (14.02”)

Exclusively from Keller Supply 356mm (14.02”)

Model Numbers 941667 33"x22" 3H 8.0" 18 Numbers 941680 33"x22" 4H 8.0" 18


STAINLESS STEEL SINKS UNDERMOUNT SINGLE BOWL

CS2318US DIMENSION: 31-1/2” X 18-1/4” X 9” THICKNESS: 16 GAUGE FINISH: SATIN

4 STRAINER NOT INCLUDED

560234

Scratch and stain resistant commercial-grade premium satin brush finish guarantees durability and lasting shine Sound deaden pad undercoated insulation prevents from condensation and reduces noise while sink is in use Clips, instruction manual and cut out template included Items required for assembly screwdriver and silicone

Exclusively from Keller Supply

2018 Caitlin Catalog | 51


STAINLESS STEEL SINKSSingle Bowl UNDERMOUNT SINGLE BOWL

Stainless Steel Sink

CS1815US

CS1815US 630800 Undermount Single Bowl

4

Material: Stainless Steel Dimension: 18-1/2” x 15” x 7” Drain Opening: 3-1/2” **Strainer not included**

Thickness: 18 Gauge Finish: Satin Scratch and stain resistant commercial-grade premium satin brush finish guarantees durability and lasting shine Sound deaden pad undercoated insulation prevents from condensation and reduces noise while sink is in use Clips, instruction manual and cut out template included Items required for assembly screwdriver and silicone

52 | 2018 Caitlin Catalog

Exclusively from Keller Supply


STAINLESS STEEL SINKS UNDERMOUNT SINGLE BOWL

CS2318US

DIMENSION: 23-1/8” X 17-7/8” X 9” THICKNESS: 18 GAUGE FINISH: SATIN

4 STRAINER NOT INCLUDED

581273

Scratch and stain resistant commercial-grade premium satin brush finish guarantees durability and lasting shine Sound deaden pad undercoated insulation prevents from condensation and reduces noise while sink is in use Clips, instruction manual and cut out template included Items required for assembly screwdriver and silicone

Exclusively from Keller Supply

2018 Caitlin Catalog | 53


STAINLESS STEEL SINKS UNDERMOUNT SINGLE BOWL

CS2321US

DIMENSION: 23-5/8” X 21” X 9” THICKNESS: 16 GAUGE FINISH: SATIN

4 STRAINER NOT INCLUDED

467745

Scratch and stain resistant commercial-grade premium satin brush finish guarantees durability and lasting shine Sound deaden pad undercoated insulation prevents from condensation and reduces noise while sink is in use Clips, instruction manual and cut out template included Items required for assembly screwdriver and silicone

54 | 2018 Caitlin Catalog

Exclusively from Keller Supply


Single Bowl Stainless Steel Sink STAINLESS STEEL SINK

TOPMOUNT SINGLE BOWL

Single Bowl Stainless Steel Si CS25223 CS25224

942071 942073 Product Features Topmount Single Bowl

DIMENSION: 25” X 22” X 8”

Material: Stainless Steel THICKNESS: 18 GAUGE

FINISH: SATIN

Dimension: 25” x 22” x 8”

Product Features

4

Topmount Single Bowl

Drain Opening: 3-1/2”

Material: Stainless Steel

Thickness: 18 Gauge

STRAINER NOT INCLUDED **Strainer not included**

Dimension: 25” x 22” x 8”

Finish: Satin Scratch and stain resistant commercial-grade premium satin brushDrain finishOpening: 3-1/2” guarantees durability and lasting shine Thickness: 18 Gauge

**Strainer not included**

Scratch andfrom staincondensation resistant commercial-grade Sound deaden pad undercoated insulation prevents and premium satin brush finish guarantees durability Finish: Satin reduces noise while sink is in use and lasting shine

Clips, instruction manual and cut out template included 203mm (8.0”)

Scratch and stain resistant com Sound deaden pad undercoated insulation premium satin brush finish gua from and reduces noise Items required for assemblyprevents screwdriver andcondensation silicone and lasting shine while sink is in use 203mm (8.0”)

101.6mm (4.0”)

Items required for assembly sc silicone

φ91mm (φ3.5”)

Model Numbers 942071 25"x22" 3H 8.0" 18 GA 2B SS SINK 942073 25"x22"4H 8.0" 18 GA 2B SS SINK Model Numbers 559mm (22.0”)

559mm (22.0”)

φ91mm (φ3.5”)

394mm (15.5”)

φ38mm (φ1.5”)

Clips, instruction manual and c Items required for assembly screwdriver and included silicone 101.6mm (4.0”)

394mm (15.5”)

φ38mm (φ1.5”)

Sound deaden pad undercoate

Clips, instruction manual and cut out prevents fromtemplate condensation an included while sink is in use

942071 25"x22" 3H 8.0" 18 GA 942073 25"x22"4H 8.0" 18 GA

533mm (21.0”) 635mm (25.0”) 533mm (21.0”) 635mm (25.0”)

Exclusively from Keller Supply

2018 Caitlin Catalog | 55


BASKET STRAINERS

4

56 | 2018 Caitlin Catalog

Exclusively from Keller Supply


BASKET STRAINERS

4

Exclusively from Keller Supply

2018 Caitlin Catalog | 57


WATER SUPPLY CONNECTORS STAINLESS STEEL

FEATURES:

• 304 Stainless Steel Braided Flexible Connectors with Heavy-Duty Reinforced PVC Inner Hose • Operating Pressure : 200 PSI • Operating Temperature : 25-150°F • High Bursting Strength : 2000 PSI At 70°F • Designed for Long-Term Strength, Flexibility and Reliability • Exceeds All Requirement for Flexible Water Connector as Defined By ASME A112.18.6 ANS CSA B125.6 • NSF 61 and Low-Lead Regulation Certified

5

INSTALLATION INSTRUCTIONS:

• For use with water in accessible location only • Do not expose to corrosive chemicals • Hand tighten plus 1/4 turn, do not over-tighten

58 | 2018 Caitlin Catalog

Exclusively from Keller Supply


ANGLE BALL STOP

1/4 TURN ANGLE BALL STOP - LEAD FREE

CAITLIN ASQTPE19

Item No.

Size

A

B

CAITLIN ASQTPE19

1/2” NOM PEX INLET X 3/8” OD LF CP

2.31 in.

1.26 in. REF

839121

FEATURES:

• Positive 1/4 Turn Shut Off • Full-Flow Operation with No Waterway Obstructions • Corrosion-Resistant Handle is Plated in an Attractive Chrome Finish • Machined One-Piece Brass Body Provides Strength, Durability & Long-Lasting Performance • Easy-To-Remove Handle with Screw Attachment Helps Protect Against Accidental Operation During Rough-Ins • 100% Leak Tested • No Lead • Operating Pressure 125PSI Maximum • Operating Temperature 40°F-160°F

Exclusively from Keller Supply

2018 Caitlin Catalog | 59

6


ANGLE BALL STOP

MULTI-TURN ANGLE/STRAIGHT BALL STOP - LEAD FREE

CAITLIN AS19C

CAITLIN ASLK19

MULTI-TURN ANGLE VALVE _____________________________________________________________________ CAITLIN ASLK19 5/8” OD X 3/8” OD LOOSE KEY LF CP _____________________________________________________________________ CAITLIN ASMT19 1/2” PEX COLD CRIMP X 3/8” OD LF CP _____________________________________________________________________ CAITLIN AS19C 5/8” OD X 3/8” OD LF CP CAITLIN AS17C

1/2” FIP X 3/8” OD LF CP

6 CAITLIN ASMT14 MULTI-TURN STRAIGHT VALVE _____________________________________________________________________ CAITLIN ASMT14 1/2” PEX COLD CRIMP X 3/8” OD LF CP CAITLIN AS14C

5/8” OD X 3/8” OD LF CP

FEATURES:

• Corrosion-Resistant Handle is Plated in an Attractive Chrome Finish • Machined One-Piece Brass Body Provides Strength, Durability & Long-Lasting Performance • Easy-To-Remove Handle with Screw Attachment Helps Protect Against Accidental Operation During Rough-Ins • 100% Leak Tested • No Lead • Operating Pressure 125PSI Maximum • Operating Temperature 40°F-160°F

60 | 2018 Caitlin Catalog

Exclusively from Keller Supply


ANGLE BALL STOP

1/4 TURN ANGLE/STRAIGHT BALL STOP - LEAD FREE

CAITLIN ASQTBV17 1/4 TURN ANGLE VALVE _______________________________________________________________________________________ CAITLIN ASQTBV17 1/2” FIP X 3/8” OD LF CP _______________________________________________________________________________________ CAITLIN ASQTBV19 5/8” OD X 3/8” OD LF CP _______________________________________________________________________________________ CAITLIN ASQTLN19 5/8” OD X 3/8” OD LESS NUT&FERRULE ON 3/8 SIDE ONLY LF CP _______________________________________________________________________________________ CAITLIN ASCPVC19 1/2” NOM CPVC INLET X 3/8” OD LF CP _______________________________________________________________________________________ CAITLIN ASQTCPVC19 1/2” NOM CPVC INLET X 3/8” LESS NUT& FERRULE ON 3/8” SIDE ONLY LF CP CAITLIN ASQTPE19

1/2” NOM PEX INLET X 3/8” OD LF CP

6

CAITLIN ASQTBV12 1/4 TURN STRAIGHT VALVE _______________________________________________________________________________________ CAITLIN ASQTBV12 1/2” FIP X 3/8” OD COMP LF CP _______________________________________________________________________________________ CAITLIN ASQTBV14 5/8” OD X 3/8” OD COMP LF CP CAITLIN ASQTPE14C

1/2” NOM CRIMP BARB X 3/8” OD COMP LF CP

FEATURES:

• Positive 1/4 Turn Shut Off • Full-Flow Operation with No Waterway Obstructions • Corrosion-Resistant Handle is Plated in an Attractive Chrome Finish • Machined One-Piece Brass Body Provides Strength, Durability & Long-Lasting Performance • Easy-To-Remove Handle with Screw Attachment Helps Protect Against Accidental Operation During Rough-Ins • 100% Leak Tested • No Lead • Operating Pressure 125PSI Maximum • Operating Temperature 40°F-160°F

Exclusively from Keller Supply

2018 Caitlin Catalog | 61


BALL VALVES

PREMIUM BRASS LEADED

SERIES CPBV-IPS COMMERCIAL STYLE

WITH THREADED ENDS, FULL PORT SIZES 1/4” TO 4” • Pressure Rating 600 WOG - 150 WSP • Temperature to 366ºF • Blow Out Proof Stem, Chrome Plated Brass Ball • P.T.F.E. Seats, Seals, and Thrust Washer • Adjustable Stem Packing • 100% Electronically Tested in the Open and Closed Position at 80 PSI • Made in Italy

6 CONNECTION: ANSI B 1.20.1

The Buna O-Ring is fitted to the stem of the valve as the best possible protection against potential gas leakage under extreme duty, or low pressure applications. A secondary PTFE stem seal will also assure that the valve is suitable for use up to 366º F. # Pos

Part Name

# PCS

Material

1 Body Brass CW617N UNI EN 12165 1 ________________________________________________________ 2 End Connection Brass CW617N UNI EN 12165 1 ________________________________________________________ 3 Ball Brass CW617N UNI EN 12165 1 ________________________________________________________ 4 Ball Seat P.T.F.E. 2 ________________________________________________________ 5 Thrust Washer/Stem Seat P.T.F.E. 2 ________________________________________________________ 6 O-Ring NBR 1 ________________________________________________________ 7 Packing Gland Brass CW614N UNI EN 12164 1 ________________________________________________________ 8 Nut Steel 6S 2 ________________________________________________________ 9 Stem Brass CW614N UNI EN 12164 1 ________________________________________________________ Handle Fe DD11 UNI EN 10111 1 10

Size OP I

L OH CH R H CV PSI LBS

634200 CPBV12T 1/2” .059 0.53 2.44 1.25 0.98 3.86 1.81 19.00 600 0.48 ____________________________________________________________________________ 634125 CPBV34T 3/4” .079 0.55 2.71 1.53 1.22 4.80 2.28 34.00 600 0.79 ____________________________________________________________________________ 634203 CPBV1T 1” 0.98 0.66 3.07 1.92 1.49 4.80 2.44 50.10 600 1.22 ____________________________________________________________________________ 634204 CPBV114T 1-1/4” 1.26 0.68 3.42 2.32 1.88 6.02 3.00 103.70 600 2.14 ____________________________________________________________________________ 634205 CPBV112T 1-1/2” 1.57 0.68 3.89 2.87 2.12 6.02 3.23 268.40 600 3.20 ____________________________________________________________________________ 634206 CPBV2T 2” 1.95 0.69 4.33 3.38 2.63 6.38 3.74 309.20 600 4.08 _______________

62 | 2018 Caitlin Catalog

Exclusively from Keller Supply


BALL VALVES

PREMIUM BRASS LEADED

SERIES CPBV-SWT COMMERCIAL STYLE

WITH SOLDER ENDS, FULL PORT SIZES 1/2” TO 4” • Pressure Rating 600 WOG - 150 WSP • Temperature to 366ºF • Blow Out Proof Stem, Chrome Plated Brass Ball • P.T.F.E. Seats, Seals, and Thrust Washer • Adjustable Stem Packing • 100% Electronically Tested in the Open and Closed Position at 80 PSI • Made in Italy

6 CONNECTION: ANSI B 16, 18

The Buna O-Ring is fitted to the stem of the valve as the best possible protection against potential gas leakage under extreme duty, or low pressure applications. A secondary PTFE stem seal will also assure that the valve is suitable for use up to 366º F. # Pos

Part Name

# PCS

Material

1 Body Brass CW617N UNI EN 12165 1 ________________________________________________________ 2 End Connection Brass CW617N UNI EN 12165 1 ________________________________________________________ 3 Ball Brass CW617N UNI EN 12165 1 ________________________________________________________ 4 Ball Seat P.T.F.E. 2 ________________________________________________________ 5 Thrust Washer/Stem Seat P.T.F.E. 2 ________________________________________________________ 6 O-Ring NBR 1 ________________________________________________________ 7 Packing Gland Brass CW614N UNI EN 12164 1 ________________________________________________________ 8 Nut Steel 6S 2 ________________________________________________________ 9 Stem Brass CW614N UNI EN 12164 1 ________________________________________________________ Handle Fe DD11 UNI EN 10111 1 10

Size OP L

I H R OD OH CH CV PSI LBS

634207 CPBV12S 1/2” .059 2.58 0.50 1.81 3.86 0.63 1.30 0.98 18.90 600 0.50 __________________________________________________________________________________ 634208 CPBV34S 3/4” .079 3.00 0.75 2.28 4.80 0.88 1.53 1.22 34.22 600 0.77 __________________________________________________________________________________ 634210 CPBV1S 1” 0.98 3.56 0.91 2.44 4.80 1.13 1.93 1.50 49.88 600 1.19 __________________________________________________________________________________ 634211 CPBV114S 1-1/4” 1.26 4.09 0.96 3.00 6.02 1.38 2.32 1.90 103.00 600 2.20 __________________________________________________________________________________ 634214 CPBV112S 1-1/2” 1.57 4.56 1.10 3.23 6.02 1.63 2.87 2.12 266.19 600 3.24 __________________________________________________________________________________ 634215 CPBV2S 2” 1.95 5.45 1.34 3.74 6.38 2.13 3.38 2.64 307.00 600 4.21

Exclusively from Keller Supply

2018 Caitlin Catalog | 63


BALL VALVES

PREMIUM BRASS LEAD-FREE

SERIES CPBVLF-IPS COMMERCIAL STYLE

FEMALE/FEMALE, FULL PORT SIZES 1/2” TO 2” STEEL HANDLES GREEN GRIP • FNPT for Female IP Threads • Pressure Rating 600 WOG - 150 WSP • Temperature to 366ºF • Blow Out Proof Stem, Chrome Plated Brass Ball • P.T.F.E. Seats, Seals, and Thrust Washer • Adjustable Stem Packing • 100% Electronically Tested in the Open & Closed Position at 80 PSI • We Recommend the Tested in the Open or Closed, Not in Mid Position, and to Maneuver the Valve at Least Twice a Year • Made in Italy

6 CONNECTION: ANSI B 1.20.1

The Buna O-Ring is fitted to the stem of the valve as the best possible protection against potential gas leakage under extreme duty, or low pressure applications. A secondary PTFE stem seal will also assure that the valve is suitable for use up to 366º F. # Pos

Part Name

# PCS

Material

1 Body Low Lead Brass * 1 ____________________________________________________ 2 End Connection Low Lead Brass * 1 ____________________________________________________ 3 Ball Low Lead Brass * Tea Coated 1 ____________________________________________________ 4 Stem Low Lead Brass * 2 ____________________________________________________ 5 Packing Gland Brass CW614N UNI EN 12164 2 ____________________________________________________ 6 Handle Steel DD11 1 ____________________________________________________ 7 Ball Seat P.T.F.E. 1 ____________________________________________________ 8 Thrust Washer/Stem Seat P.T.F.E. 2 ____________________________________________________ 9 O-Ring NBR 1 ____________________________________________________ Nut Steel CL04 1 10

Size OP I

L OH R H CV PSI LBS

791225 CPBV12T 1/2” .059 0.54 2.34 1.30 3.78 1.81 18.84 600 0.46 _______________________________________________________________________ 791230 CPBV34T 3/4” .079 0.55 2.57 1.54 4.76 2.28 34.10 600 0.77 _______________________________________________________________________ 791231 CPBV1T 1” 0.98 0.66 3.07 1.93 4.76 2.44 49.71 600 1.19 _______________________________________________________________________ 791232 CPBV114T 1-1/4” 1.26 0.68 3.43 2.32 5.94 2.99 102.88 600 2.12 _______________________________________________________________________ 791233 CPBV112T 1-1/2” 1.57 0.68 3.90 2.87 5.94 3.23 265.88 600 3.20 _______________________________________________________________________ 791236 CPBV2T 2” 1.95 0.70 4.37 3.43 6.30 3.74 306.34 600 4.08 ________________________________________

*

lead free refers to the wetted surface of pipe, fittings and fixtures in potable water systems that have a weighted average lead content= 0,25%.Source: California health & Safety code (116875). Vermont Act 193

64 | 2018 Caitlin Catalog

Exclusively from Keller Supply


BALL VALVES

PREMIUM BRASS LEAD-FREE

SERIES CPBVLF-SWT COMMERCIAL STYLE

FEMALE/FEMALE, FULL PORT SIZES 1/2” TO 2” STEEL HANDLES GREEN GRIP • Female Sweat Ends • Pressure Rating 600 WOG - 150 WSP • Temperature to 366ºF • Blow-Out Proof Stem, Chrome Plated Brass Ball • P.T.F.E. Seats, Seals, and Thrust Washer • Adjustable Stem Packing • 100% Electronically Tested in the Open & Closed Position at 80 PSI • Made in Italy

6 CONNECTION: ANSI B 16. 18

The Buna O-Ring is fitted to the stem of the valve as the best possible protection against potential gas leakage under extreme duty, or low pressure applications. A secondary PTFE stem seal will also assure that the valve is suitable for use up to 366º F. # Pos

Part Name

# PCS

Material

1 Body Brass CW 510L * 1 ____________________________________________________ 2 End Connection Brass CW 510L * 1 ____________________________________________________ 3 Ball Brass CW 510L * Tea Coated 1 ____________________________________________________ 4 Stem Brass CW 510L * 2 ____________________________________________________ 5 Packing Gland Brass CW614N UNI EN 12164 2 ____________________________________________________ 6 Handle Steel DD11 1 ____________________________________________________ 7 Ball Seat P.T.F.E. 1 ____________________________________________________ 8 Thrust Washer/Stem Seat P.T.F.E. 2 ____________________________________________________ 9 O-Ring NBR 1 ____________________________________________________ Nut Steel CL04 1 10

Size OP L

I H R OD OH CH CV PSI LBS

791282 CPBV12S 1/2” .059 2.58 0.50 1.84 3.87 0.63 1.30 0.98 18.90 600 0.22 __________________________________________________________________________________ 791283 CPBV34S 3/4” .079 3.01 0.75 2.32 4.76 0.88 1.54 1.22 34.22 600 0.36 __________________________________________________________________________________ 791284 CPBV1S 1” 0.98 3.56 0.91 2.48 4.76 1.13 1.93 1.50 49.88 600 0.53 __________________________________________________________________________________ 791286 CPBV114S 1-1/4” 1.26 4.09 0.96 2.99 5.94 1.38 2.32 1.89 103.00 600 0.97 __________________________________________________________________________________ 791287 CPBV112S 1-1/2” 1.57 4.57 1.10 3.25 5.94 1.63 2.87 2.13 307.00 600 1.45 __________________________________________________________________________________ 791288 CPBV2S 2” 1.95 5.47 1.34 3.78 6.30 2.13 3.43 2.64 307.00 600 1.93

*

lead free refers to the wetted surface of pipe, fittings and fixtures in potable water systems that have a weighted average lead content= 0,25%.Source: California health & Safety code (116875). Vermont Act 193

Exclusively from Keller Supply

2018 Caitlin Catalog | 65


BALL VALVES

BRASS LEAD-FREE

THREADED NPT ENDS Products #

Eclipse #

Size

Wt. (Lbs)

CBV12T-LF 687028 1/2” 0.40 ___________________________________________________ CBV34T-LF 687029 3/4” 0.79 ___________________________________________________ CBV1T-LF 687031 1” 1.19 ___________________________________________________ CBV114T-LF 687032 1-1/4” 1.92 ___________________________________________________

CBV112T-LF 687034 1-1/2” 2.60 ___________________________________________________ CBV2T-LF 687037 2” 4.37

Threaded NPT Ends Per ANSI B 1.20.1

FEATURES:

• 600 WOG • 150 WSP • Full Port • NSF 61 Annex G Approved • Meets MSS SP-110 Standards • Blow-Out Proof Stem • Adjustable Packing • Made in China

6

SWEAT ENDS Products #

Eclipse #

Size

Wt. (Lbs)

CBV12S-LF 687482 1/2” 0.33 ___________________________________________________ CBV34S-LF 687484 3/4” 0.73 ___________________________________________________ CBV1S-LF 687486 1” 1.08 ___________________________________________________ CBV114S-LF 687488 1-1/4” 1.92 ___________________________________________________

CBV112S-LF 687489 1-1/2” 2.43 ___________________________________________________ CBV2T-SF 687490 2” 4.17

Sweat Ends Per ANSI B 16.18

66 | 2018 Caitlin Catalog

Exclusively from Keller Supply


BALL VALVES

BRASS LEAD-FREE

SPECIFICATIONS # Pos

Part Name

Material

Qty

1 Body Low Lead Brass * 1 ____________________________________________________ 2 Ball Low Lead Brass * 1 ____________________________________________________ 3 End Cap Low Lead Brass * 1 ____________________________________________________ 4 Seat P.T.F.E. 2 ____________________________________________________ 6 Stem ASTM B16 1 ____________________________________________________ 7 Stem P.T.F.E. 1 Set ____________________________________________________ 8 Handle ASTM A283-D 1 ____________________________________________________ 9 Sleeve Plastic/Vinyl 1 ____________________________________________________ 9 Packing ASTM B16 1 ____________________________________________________ Handle Nut AISI 1010 1 10

6

* Chemical Content by Percentage is: Cu

Bi

Pb

Sn

Ni

Fe

AL

Zn

58-61 <2.0 <0.2 <0.5 <0.5 <0.2 <0.2 Reminder

DIMENSIONS IN INCHES Size

OD

E

L H 687028-687037

687482-687490

L1

1/2” 0.5 2.95 1.5 2.13 1.93 0.5 ___________________________________________________ 3/4” 0.75 3.94 1.85 2.48 2.72 0.75 ___________________________________________________

1” 0.98 3.94 2.05 2.99 3.31 0.91 ___________________________________________________ 1-1/4” 1.26 4.92 2.36 3.35 3.78 0.97 ___________________________________________________ 1-1/2” 1.5 4.92 2.56 3.62 4.29 1.09 ___________________________________________________ 2” 1.97 7.87 3.11 4.25 5.35 1.34

Exclusively from Keller Supply

2018 Caitlin Catalog | 67


BALL VALVES

SPBV-T-LF AND SPBV-S-LF Brass Ball Valve, Female/Female, Full Port Sizes 1/4” To 4”

OPTIONS SPBVL-T-LF = LOCKING LEVER HANDLE 1/4” TO 4” SPBVL-S-LF

6

FEATURES: • Pressure Rating 600 WOG - 150 WSP • Temperature to 366ºF • Blow-Out Proof Stem, Chrome Plated Brass Ball • P.T.F.E. Seats, Seals, and Thrust Washer • 100% Electronically Tested in the Open and Closed Position at 80 PSI • Double O-Ring Stem Seals

SPECIFICATIONS

A 2-piece adapter loaded style, full port lead free brass ball valve. The valve shall have a hot forged brass body and adapter for high tensile strength, a blowout proof bottom loaded stem, a 600WOG body rating and 150WSP rating for all sizes, 1/4” to 4”. All wetted components of the valve shall be made from brass alloy CW510L/ASTM C28500 containing no bismuth, thus preventing stress cracking. The ball shall be T.E.A. coated for guaranteed wear, corrosion, and porosity resistance. The valve must have less than .20% lead content, and be approved to NSF-61 ANNEX F and G. The valve must incorporate virgin P.T.F.E. seats and seals for the tightest sealing, and two O-ring’s around the stem for maximum leakage protection. The threaded valve must conform to ANSI B1.20.1 and solder version (SPBV-S-LF) to ANSI B16.18. The SPBV shall conform and approved to the following standards: AGAZ21.15, AGA 3-88, ASME 16.33, ASME 16.38, CAN/CGA-3.16, MSS SP-110, U.L. YSDT, U.L. YRPV, U.L. VQGU, and FM-FMRC Class 1140, and shall be a RB series SPBV-T-LF (threaded) or SPBV-S-LF (solder) CRN numbers available.

68 | 2018 Caitlin Catalog

Exclusively from Keller Supply


BALL VALVES

6

Pressure-Temperature Chart for SPBV-T-LF/SPBV-S-LF Series

ECLIPSE# 846530 846555 846562 846567 846578 846581 846547 846557 846565 846577 846580 846583

KELLER PART# SPBV12T-LF SPBV34T-LF SPBV1T-LF SPBV114T-LF SPBV112T-LF SPBV2T-LF SPBV12S-LF SPBV34S-LF SPBV1S-LF SPBV114S-LF SPBV112S-LF SPBV2S-LF

DESCRIPTION 161N LF 1/2” 161N LF 3/4” 161N LF 1” 161N LF 1-1/4” 161N LF 1-1/2” 161N LF 2” 1615 LF 1/2” 1615 LF 3/4” 1615 LF 1” 1615 LF 1-1/4” 1615 LF 1-1/2” 1615 LF 2”

Exclusively from Keller Supply

2018 Caitlin Catalog | 69


BALL VALVES

GAS TEE HANDLE

FEATURES:

• 400 PSI CWP Rated • 1/2 IP for Indoor Appliance Connections Per ANSI Z21.15 and CGA 9.1A • 5 PSI for Indoor Shutoff Per CGA 91-002 and ASME B16.44

WARRANTY

This product carries a limited warranty for one year. UL; CSA; ANSI Z21.15; CGA 9.1A; CGA 91-002; ASME B16.44

685810

SPECIFICATIONS

6

No.

Part Name

Material

Spec

Qty1

1 Screw AISI-1010 1 ____________________________________________________ 2 Handle B86 ASTM 1 ____________________________________________________ 3 Stem B16-C36000 ASTM 1 ____________________________________________________ 4 Stem Gland Screw B16-C36000 ASTM 1 ____________________________________________________ 5 Grand Packing PTFE Teflon 1 ____________________________________________________ 6 Name Plate B209-1100 ASTM 1 ____________________________________________________ 7 Body B124-C37700 ASTM 1 ____________________________________________________ 8 Ball Disc Teflon PTFE Teflon 2 ____________________________________________________ 9 Ball Disc B16-36000 ASTM 1 ____________________________________________________ 10 End Plug B124-C37700 ASTM 1

MODELS Product # Size

L

H D H1 LT** L2

685809 1/2” 2.17” 1.30” .39” N/A 1.77” N/A ___________________________________________________ 685810 3/4” 2.44” 1.42” .59” N/A 1.77” N/A ___________________________________________________ 685812

1”

2.87” 1.71” .79” N/A 2.76” N/A

** NOTE: L1 dimension on this series handle is from end to end.

70 | 2018 Caitlin Catalog

Exclusively from Keller Supply


VALVES

STRAIGHT STOP IPS THREADED END

FEATURES:

• Bronze Construction • Threaded Ends • 125 PSI • Operating Temperature: 40-160°F • Maximum Temperature: 180 °F

WARRANTY

This product carries a limited warranty for one year.

685799

SPECIFICATIONS

No.

6

Part Name

Material

Qty.

1 Wheel Nut V8 1 _______________________________________________ 2 Name Plate 1050H418 1 _______________________________________________ 3 Hand Wheel FC20 1 _______________________________________________ 4 Stem B584-C857 1 _______________________________________________ 5 Packing Nut B16-C36000 1 _______________________________________________ 6 Packing NBR 1 _______________________________________________ 7 Bonnet B584-C857 1 _______________________________________________ 8 Washer Nylon 1 _______________________________________________ 9 Seat Packing NBR 1 _______________________________________________ 10 Packing Screw C26000W 1 _______________________________________________ 11 Body ________________

P roduct# Description Inlet Connection Outlet Connection

B584-C857 1

A (Open) in mm

A (Close) in mm

B in

mm

685798 1/2 BRS IPS STRT ST VLV 1/2 FIP NPT THREADED END 1/2 FEM NPT THREADED END 3.512 89.2 3.205 81.4 2.13 54.1 ______________________________________________________________________________________________________________________ 685799 3/4 BRS IPS STRT ST VLV 3/4 FIP NPT THREADED END 3/4 FEM NPT THREADED END 3.662 93 3.352 85.1 2.2 55.8 ______________

Exclusively from Keller Supply

2018 Caitlin Catalog | 71


VALVES

STRAIGHT STOP IPS SWEAT END

FEATURES:

• Bronze Construction • Sweat Ends • 125 PSI • Operating Temperature: 40-160°F • Maximum Temperature: 180 °F

WARRANTY

This product carries a limited warranty for one year.

685802

SPECIFICATIONS

6

No.

Part Name

Material

Qty.

1 Wheel Nut V8 1 _______________________________________________ 2 Name Plate 1050H418 1 _______________________________________________ 3 Hand Wheel FC20 1 _______________________________________________ 4 Stem B584-C857 1 _______________________________________________ 5 Packing Nut B16-C36000 1 _______________________________________________ 6 Packing NBR 1 _______________________________________________ 7 Bonnet B584-C857 1 _______________________________________________ 8 Washer Nylon 1 _______________________________________________ 9 Seat Packing NBR 1 _______________________________________________ 10 Packing Screw C26000W 1 _______________________________________________ 11 Body

P roduct# Description Inlet Connection Outlet Connection

B584-C857 1

A (Open) in mm

A (Close) in mm

B in

mm

685800 1/2 BRS IPS STRT ST VLV 1/2 FIP NPT SWEAT END 1/2 FEM NPT SWEAT END 3.512 89.2 3.205 81.4 2.13 54.1 ______________________________________________________________________________________________________________________ 685799 3/4 BRS IPS STRT ST VLV 3/4 FIP NPT SWEAT END 3/4 FEM NPT SWEAT END 3.662 93 3.352 85.1 2.2 55.8 ______________

72 | 2018 Caitlin Catalog

Exclusively from Keller Supply


VALVES

STOP & WASTE THREADED END

FEATURES:

• Bronze Construction • Threaded Ends • 1/2” (685803) or 3/4” (685804) • 125 PSI

WARRANTY

This product carries a limited warranty for one year.

685804

SPECIFICATIONS No.

Part Name

6

Material

1 Wheel Nut V8 ______________________________________ 2 Name Plate 1050H18 ______________________________________ 3 Hand Wheel FC20 ______________________________________ 4 Stem Bronze ______________________________________ 5 Packing Nut Bronze ______________________________________ 6 Packing NBR ______________________________________ 7 Bonnet Bronze ______________________________________ 8 Washer Nylon ______________________________________ 9 Seat Packing NBR ______________________________________ 10 Packing Screw C26000W ______________________________________ 11 Body Bronze ______________________________________ 12 Screw B16-C36000 ______________________________________ 13 Packing

NBR

TOLERANCES Unless Otherwise Specified 0.02 - 0.5 30.005 ______________________________________ 0.5 - 2.0 30.010 ______________________________________ 2.0 - 5.0 30.015 ______________________________________ 5.0 12.0 30.020 ______________________________________ 12.0 - 40.0 30.025 ______________________________________ Angular 31/2” ______________________________________

Exclusively from Keller Supply

2018 Caitlin Catalog | 73


VALVES

STOP & WASTE VALVES (SWEAT END)

FEATURES:

• Bronze Construction • Sweat Ends • 1/2” (685805) or 3/4” (685806) • 125 PSI

WARRANTY

This product carries a limited warranty for one year.

685805

SPECIFICATIONS

6

No.

Part Name

Material

1 Wheel Nut V8 ______________________________________ 2 Name Plate 1050H18 ______________________________________ 3 Hand Wheel FC20 ______________________________________ 4 Stem Bronze ______________________________________ 5 Packing Nut Bronze ______________________________________ 6 Packing NBR ______________________________________ 7 Bonnet Bronze ______________________________________ 8 Washer Nylon ______________________________________ 9 Seat Packing NBR ______________________________________ 10 Packing Screw C26000W ______________________________________ 11 Body Bronze ______________________________________ 12 Screw B16-C36000 ______________________________________ 13 Packing

NBR

TOLERANCES Unless Otherwise Specified 0.02 - 0.5 30.005 ______________________________________ 0.5 - 2.0 30.010 ______________________________________ 2.0 - 5.0 30.015 ______________________________________ 5.0 12.0 30.020 ______________________________________ 12.0 - 40.0 30.025 ______________________________________ Angular 3-1/2” ______________________________________

74 | 2018 Caitlin Catalog

Exclusively from Keller Supply


ANTI-SIPHONE FROST FREE SILLCOCKS 3/4” HOSE THREAD OUTLET - MULTI TURN

Anti-Siphone Frost Free Sillcocks 3/4" Hose Thread Outlet - Multi Turn 1/2" MIP X 1/2" SOLDER 897248 897250 897251 897252 897253 897254

INLET 3/4" MIP X 1/2" FIP 897256 897257 897258 897259 897260 897261

1/2" PEX 897262 897263 897264 897265 897266 897267

DIMENSION(inches) SIZE A B 4" 4 3.11 6" 6 3.11 8" 8 3.11 10" 10 3.11 12" 12 3.11 14" 14 3.11

FEATURES: Features:

••Working & Maximum Water Pressure: 125 PSI125 psi Working & maximum water pressure: • Working Water Temperature: 32 F~140 F (0 C~60 C) • Working water temperature: 32 F~140 F (0 C~60 C) • Maximum Water Temperature: 180 F (82 C) • Maximum water temperature: 180 F (82 C) • Finish: Chrome Plated

• Finish: Chrome Plated

7

1/2" MIP X 1/2" SOLDER

3/4" MIP X 1/2" FIP

1/2" PEX

NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Exclusively from Keller Supply

PART SCREW LABEL HANDLE BODY ASSEMBLY STEM HOLDER WASHER WASHER PACKING STEM SET SCREW CARTRIDGE O-RING VB COVER VB BODY VB FLOT SEAT O-RING ADAPTER TUBE PACKING STEM WASHER WASHER SCREW

MATERIAL BRASS ALUMINUM ALUMINUM BRASS C.P. BRASS SS 304 SS 304 NBR BRASS SS 304 BRASS VITON ABS C.P. POM POM NBR NBR BRASS BRASS NBR BRASS NBR BRASS

2018 Caitlin Catalog | 75


HOSE BIBS

STANDARD HOSE BIBS

FEATURES:

• Bronze Body • 125 PSI • Operating Temperature: 40-160°F • 3/4” Male Hose Thread Outlet

WARRANTY

This product carries a limited warranty for one year.

Product # Description

685666 1/2” Male Hose Bibb ______________________________ 634109 3/4” Male Hose Bibb _____________________

7

SPECIFICATIONS No.

Part Name

Material

Qty.

1 Screw Stainless 1 _______________________________________________ 2 Handle Zinc 1 _______________________________________________ 3 Nut Brass 1 _______________________________________________ 4 Packing NBR 1 _______________________________________________ 5 Bonnet Brass 1 _______________________________________________ 6 Washer Vulcanized 1 _______________________________________________ 7 Stem Brass 1 _______________________________________________ 8 Seat NBR 1 _______________________________________________ 9 Screw Stainless 1 _______________________________________________ 10 Body Bronze 1 ________________

76 | 2018 Caitlin Catalog

Exclusively from Keller Supply


HOSE BIBS

BENT NOSE GARDEN VALVES

FEATURES:

• Bronze Body • 125 PSI • Operating Temperature: 40-160°F • 3/4” Male Hose Thread Outlet

WARRANTY

This product carries a limited warranty for one year.

Product # Description

685792 1/2” FIP Bent Nose Garden Valve ____________________________________ 685793 3/4” FIP Bent Nose Garden Valve

7

SPECIFICATIONS

No.

Part Name

Material

Qty.

1 Screw Stainless 1 _______________________________________________ 2 Handle Zinc 1 _______________________________________________ 3 Nut Brass 1 _______________________________________________ 4 Packing NBR 1 _______________________________________________ 5 Garden Valve Bronze 1 _______________________________________________ 6 Stem Brass 1 _______________________________________________ 7 Washer NBR 1 _______________________________________________ 8 Screw Stainless 1 _______________________________________________ 9 Washer Vulcanized 1 _______________________________________________ 10 Nut Brass 1 ________________

Exclusively from Keller Supply

2018 Caitlin Catalog | 77


HOSE BIBS

BENT NOSE GARDEN VALVES

FEATURES:

• Bronze Body • 125 PSI • Operating Temperature: 40-160°F • 3/4” Male Hose Thread Outlet • Bent Nose

WARRANTY

This product carries a limited warranty for one year.

Product # Description

685795

7

1” FIP Bent Nose

SPECIFICATIONS

No.

Part Name

Material

Qty.

1 Screw Stainless 1 _______________________________________________ 2 Handle Zinc 1 _______________________________________________ 3 Nut Brass 1 _______________________________________________ 4 Packing NBR 1 _______________________________________________ 5 Garden Valve Bronze 1 _______________________________________________ 6 Stem Brass 1 _______________________________________________ 7 Washer NBR 1 _______________________________________________ 8 Screw Stainless 1 _______________________________________________ 9 Washer Vulcanized 1 _______________________________________________ 10 Nut Brass 1 ________________

78 | 2018 Caitlin Catalog

Exclusively from Keller Supply


HOSE BIBS

INVERTED NOSE GARDEN VALVE

FEATURES:

• Bronze Body • 125 PSI • Operating Temperature: 40-160°F • 3/4” Male Hose Thread Outlet

WARRANTY

This product carries a limited warranty for one year.

Product # Description

685797

3/4” FIP INV Bent Nose Garden Valve

SPECIFICATIONS

No.

Part Name

7 Material

Qty.

1 Screw Stainless 1 _______________________________________________ 2 Handle Zinc 1 _______________________________________________ 3 Nut Brass 1 _______________________________________________ 4 Packing NBR 1 _______________________________________________ 5 Garden Valve Bronze 1 _______________________________________________ 6 Stem Brass 1 _______________________________________________ 7 Washer NBR 1 _______________________________________________ 8 Screw Stainless 1 _______________________________________________ 9 Washer Vulcanized 1 _______________________________________________ 10 Nut Brass 1 ________________

Exclusively from Keller Supply

2018 Caitlin Catalog | 79


YARD HYDRANTS

Yard Hydrants

FEATURES: Design Features:

• The Caitlin Yard Hydrant Provides Running Water for Lawn, Garden and Irrigation All Year, Even in Sub-Zero • The Caitlin yard hydrant providesTemperatures running water for lawn, garden and irrigation all year, even in sub-zero temperatures. • 3/4” FPT Inlet. 1” Standard Pre-Galvanized Pipe. 3/4” Male Hose Thread Outlet • 3/4” FPT inlet. 1” standard pre-galvanized pipe. 3/4” maleand hoseHandle thread with outlet. • All Caitlin Yard Hydrants Have Heavy Duty Cast Iron Head CaitlinBlue yardPolyester hydrants have heavy duty cast iron head and handle Long• All Lasting Powder Coating Finish with long polyester A powder coating finish. • Handle Can be lasting Lockedblue By Inserting Padlock into the Holes in the Head • Handle can be locked by inserting a padlock into the holes in the head and Handle To Prevent Unauthorized Use and handle to prevent unauthorized use. • Maximum Water Pressure 80 PSI • Maximum water pressure 80 PSI. • The •Caitlin Yard Hydrant Works onon Existing Fresh The Caitlin yard hydrant works existing freshWater waterSystem, system, Municipal Watermunicipal and Private Wells water and private wells.

7

CAITLIN CYH1-B

1ft Yard Hydrant

CAITLIN CYH2-B

2ft Yard Hydrant

CAITLIN CYH3-B

3ft Yard Hydrant

CAITLIN CYH4-B

4ft Yard Hydrant

CAITLIN CYH5-B

5ft Yard Hydrant

CAITLIN CYH6-B

6ft Yard Hydrant

CAITLIN CYH8-B

8ft Yard Hydrant

3/4” HOSE CONNECTION

24” GROUND LEVEL

1” GALVANIZED PIPE

BURY DEPTH

3/4” WATER

80 | 2018 Caitlin Catalog

LINE

Exclusively from Keller Supply


WATER HAMMER ARRESTER

FEATURES:

• For Single Fixture Residential Use • Helps To Eliminate Shock Waves Generated in Piping Systems By Sudden On/Off Changes in Flow • Plastic Piston • Low Lead

Product # Description

685664 1/2” Male Sweat ___________________________________________________ 685665 3/4” Male Hose Thread x 3/4” Female Hose Thread

SPECIFICATIONS

Temperature Range: 33°F to 180°F Maximum Pressure: 600 PSI ASSE 1010-2004 IAMPO Listed (cUPC)

Exclusively from Keller Supply

2018 Caitlin Catalog | 81

7


G.R.D.

FLOOR DIFFUSER

STAMPED STEEL FEATURES:

• All Steel Welded Construction • Heavy Gauge Steel Construction for Floor Use • Multi-Angled Fin Setting • Foot-Operated, Opposed Blade Damper

SPECIFICATIONS

8

82 | 2018 Caitlin Catalog

Exclusively from Keller Supply


G.R.D.

TOE SPACE GRILLE

STAMPED STEEL FEATURES:

• All Steel Construction • Heavy Gauge Steel Construction for Floor Use • Multi-Angled Fin Setting

SPECIFICATIONS

8

Exclusively from Keller Supply

2018 Caitlin Catalog | 83


G.R.D.

TWO-WAY SIDEWALL/CEILING REGISTER

STAMPED STEEL FEATURES:

• All Steel Welded Construction • For Both Sidewall and Ceiling Applications • Ideal for Shallow Duct Installation • Integral Multi-Shutter Damper • Screws Included

SPECIFICATIONS • 1/2 spaced fins at 40 degrees

8

• 1/3 spaced fins at 20 degrees

84 | 2018 Caitlin Catalog

Exclusively from Keller Supply


G.R.D.

RETURN AIR GRILLE

STAMPED STEEL FEATURES:

• All Steel Construction • 1/2” Spaced Fins at 40 Degrees • Screws Included

SPECIFICATIONS

8

Exclusively from Keller Supply

2018 Caitlin Catalog | 85


G.R.D.

RETURN AIR FILTER GRILLE

STAMPED STEEL FEATURES:

• All Steel Welded • 1/2” Spaced Fins at 40 Degrees • Removable Face with Concealed Latches & Hinges for Easy Installation and Cleaning

SPECIFICATIONS

8

86 | 2018 Caitlin Catalog

Exclusively from Keller Supply


ACCESS DOOR

STEEL UNIVERSAL ACCESS DOOR

FEATURES:

• 16 Gauge Stainless Steel or Prime Coat Finished Steel • One Piece Construction • Concealed Hinge • Not Approved for Fire Rated Applications

684930

SPECIFICATIONS

9

This product carries a 1-year limited warranty.

Exclusively from Keller Supply

2018 Caitlin Catalog | 87


ACCESS PANEL

PLASTIC ACCESS PANEL

FEATURES:

• Plastic Construction (ABS Material) • 1-1/2” Frame Around Door • Removable Door • Frame is Easily Pressed Into Place • Door & Frame Can Be Painted or Wallpapered

MODEL NUMBER:

688734 8”x8” White 688735 14”x14” White

SPECIFICATIONS

9

This product carries a 1-year limited warranty.

88 | 2018 Caitlin Catalog

Exclusively from Keller Supply


CABLE TIES

Cable Ties FEATURES:

Design Features:

• Non-Metallic Material •• Non-Metallic Min Operating Temperature: material -40°F •• Min Max Operating Temperature: 185°F -40°F. operating temperature •• Max Min Installing Temperature: 14°F operating temperature 185°F. •• Min UL181B Listed on 36” Cable Ties for HVAC Industry installating temperature 14°F. • UL181B

listed on 36” cable ties for HVAC industry.

Part No.

Size

Natural CN-36-175-9-L C6263CX

36"

C7-711-B

75pcs 7"+75pcs 11"

CN-36-175-0-L CN-7-50-9-C

36" 7"

11"

Color

Length Width Tensile Packaging (inch) (inch) Strength

Natural 50pcs/bag Natural 100pcs/bag Black

150pcs/bag

Black 50pcs/bag Natural 100pcs/bag

36 11 7 11 36 7

0.35 0.19 0.19 0.19 0.35 0.19

Bundle Range

Min Max (inch) (inch) 175LBS 0.35 11.00 50LBS 0.12 2.94 50LBS 0.12 1.69 50LBS 0.12 2.94 175LBS 0.35 11.00 50LBS 0.12 1.69

UV Light Resistance No No Yes Yes Yes No

Width

9

Length

POSITIONING DEVICE

33AS

E258930

Exclusively from Keller Supply

181B-C MH60770

2018 Caitlin Catalog | 89


DEEP FLANGES

Deep Flanges FEATURES: Product Features

• •Fits Ironiron Pipe and Copper Fits pipe andTube copper tube • •Chrome Plated Steel Chrome plated steel

Product Code

Description

IPS

CTS

Tubular

Material

Finish

897546

3/8" IPS Deep Flanges

3/8"

Steel

Chrome Plated

897547

1/2" IPS Deep Flanges

1/2"

Steel

Chrome Plated

897548

3/4'' IPS Deep Flanges

3/4"

Steel

Chrome Plated

897549

1" IPS Deep Flanges

1"

Steel

Chrome Plated

897550

1 1/4" IPS Deep Flanges

1 1/4"

Steel

Chrome Plated

897551

1 1/2" IPS Deep Flanges

1 1/2"

Steel

Chrome Plated

897552

1/4" CTS Deep Flanges

1/4"

Steel

Chrome Plated

897553

3/8" CTS Deep Flanges

3/8"

Steel

Chrome Plated

897554

1/2" CTS Deep Flanges

1/2"

Steel

Chrome Plated

897555

1 1/4" Tubular Deep Flanges

1 1/4"

Steel

Chrome Plated

897556

1 3/8" Tubular Deep Flanges

1 3/8"

Steel

Chrome Plated

897557

1 1/2" Tubular Deep Flanges

1 1/2"

Steel

Chrome Plated

10

90 | 2018 Caitlin Catalog

Exclusively from Keller Supply


BOX FLANGES

Box Flanges FEATURES: Product Features

••Fits Ironiron Pipepipe and Tubular Fits and tubular • Chrome Plated Steel

• Chrome plated steel

Product Code

Description

IPS

Tubular

Material

Finish

897541

1 1/4" IPS Boxs Flange

1 1/4"

Steel

Chrome Plated

897542

1 1/2" IPS Box Flanges

1 1/2"

Steel

Chrome Plated

897543

1 1/4" Tubular Box Flange s

1 1/4"

Steel

Chrome Plated

897544

1 1/2" Tubular Box Flanges

1 1/2"

Steel

Chrome Plated

897545

2" Tubular Box Flanges

2"

Steel

Chrome Plated

10

Exclusively from Keller Supply

2018 Caitlin Catalog | 91


FLEXIBLE FLOOR & CEILING PLATES

Flexible Floor & Celling Plates FEATURES: Product Features

••Fits Ironiron Pipe and Copper Fits pipe andTube copper tube • Chrome Plated Plastic

• Chrome plated plastic

Product Code

Description

IPS

CTS

Material

Finish

897558

3/8" IPS(1/2" CTS) Flexible Floor & Celling Plates

3/8"

1/2"

Plastic

Chrome Plated

897559

1/2" IPS(3/4" CTS)Flexible Floor & Celling Plates

1/2"

3/4"

Plastic

Chrome Plated

897560

3/4" IPS Flexible Floor & Celling Plates

3/4"

Plastic

Chrome Plated

897561

1" IPS Flexible Floor & Celling Plates

1"

Plastic

Chrome Plated

897562

1 1/4" IPS(1 1/2" CTS) Flexible Floor & Celling Plates

1 1/4"

Plastic

Chrome Plated

897563

1 1/2" IPS Flexible Floor & Celling Plates

1 1/2"

Plastic

Chrome Plated

897564

2" IPS Flexible Floor & Celling Plates

897565

2 1/2" IPS Flexible Floor & Celling Plates

897566

1 1/2"

2"

Plastic

Chrome Plated

2 1/2"

Plastic

Chrome Plated

3" IPS Flexible Floor & Celling Plates

3"

Plastic

Chrome Plated

897567

4" IPS Flexible Floor & Celling Plates

4"

Plastic

Chrome Plated

897568

1" CTS Flexible Floor & Celling Plates

897569

1 1/4" CTS Flexible Floor & Celling Plates

897570

1"

Plastic

Chrome Plated

1 1/4

Plastic

Chrome Plated

2" CTS Flexible Floor & Celling Plates

2"

Plastic

Chrome Plated

897571

3" CTS Flexible Floor & Celling Plates

3"

Plastic

Chrome Plated

897572

3 1/2" CTS Flexible Floor & Celling Plates

3 1/2"

Plastic

Chrome Plated

10

92 | 2018 Caitlin Catalog

Exclusively from Keller Supply


FLEXIBLE FLOOR & CEILING PLATES

Flexible Floor & Celling Plates FEATURES: Product Features

• Fits Iron Pipe Copper Tube • Fits ironand pipe and copper tube • White Plastic

• White plastic

Product Code

IPS

CTS

Material

Finish

897573

3/8" IPS(1/2" CTS) Flexible Floor & Celling Plates

Description

3/8"

1/2"

Plastic

White

897574

1/2" IPS(3/4" CTS)Flexible Floor & Celling Plates

1/2"

3/4"

Plastic

White

897575

3/4" IPS Flexible Floor & Celling Plates

Plastic

White

Plastic

White

Plastic

White

3/4"

897576

1" IPS Flexible Floor & Celling Plates

897577

1 1/4" IPS(1 1/2" CTS) Flexible Floor & Celling Plates

1 1/4"

1"

897578

1 1/2" IPS Flexible Floor & Celling Plates

1 1/2"

Plastic

White

897579

2" IPS Flexible Floor & Celling Plates

2"

Plastic

White

897580

2 1/2" IPS Flexible Floor & Celling Plates

2 1/2"

Plastic

White

897581

3" IPS Flexible Floor & Celling Plates

3"

Plastic

White

897582

4" IPS Flexible Floor & Celling Plates

4"

Plastic

White

897583

1" CTS Flexible Floor & Celling Plates

Plastic

White

1 1/2"

1"

897584

1 1/4" CTS Flexible Floor & Celling Plates

1 1/4

Plastic

White

897585

2" CTS Flexible Floor & Celling Plates

2"

Plastic

White

897586

3" CTS Flexible Floor & Celling Plates

3"

Plastic

White

897587

3 1/2" CTS Flexible Floor & Celling Plates

3 1/2"

Plastic

White

10

Exclusively from Keller Supply

2018 Caitlin Catalog | 93


FLOOR & CEILING PLATES HINGED

Floor & Celling Plates Hinged FEATURES: Product

Features

• Fits Iron Pipe and Copper Tube • Fits iron pipe and copper tube • Chrome Plated Steel

• Chrome plated steel

Product Code

Description

IPS

CTS

Material

Finish

897283

3/8" IPS Floor & Celling Plates Hinged

3/8"

Steel

Chrome Plated

897284

1/2" IPS Floor & Celling Plates Hinged

1/2"

Steel

Chrome Plated

3/4"

Steel

Chrome Plated

1"

Steel

Chrome Plated

1 1/4"

Steel

Chrome Plated

897285 897286 897287

3/4'' IPS Floor & Celling Plates Hinged 1" IPS Floor & Celling Plates Hinged 1 1/ 4" IPS Floor & Celling Plates Hinged

897517

1 1/2" IPS Floor & Celling Plates Hinged

1 1/2"

Steel

Chrome Plated

897518

2" IPS Floor & Celling Plates Hinged

2"

Steel

Chrome Plated

897519

3/ 8" CTS Floor & Celling Plates Hinged

3/8"

Steel

Chrome Plated

897520

1/2" CTS Floor & Celling Plates Hinged

1/2"

Steel

Chrome Plated

897521

3/4" CTS Floor & Celling Plates Hinged -

3/4"

Steel

Chrome Plated

897522

1" CTS Floor & Celling Plates Hinged

1"

Steel

Chrome Plated

897523

1 1/4" CTS Floor & Celling Plates Hinged

1 1/4"

Steel

Chrome Plated

897524

1 1/2" CTS Floor & Celling Plates Hinged

1 1/2"

Steel

Chrome Plated

10

94 | 2018 Caitlin Catalog

Exclusively from Keller Supply


FLOOR & CEILING PLATES WITH SPRING

Floor & Celling Plates With Spring FEATURES: Product Features

• Fits Iron Pipe and Copper Tube

• Fits iron pipe andSteel copper tube • Chrome Plated • Chrome plated steel

Product Code

Description

IPS

Material

Finish

897270

1/2" IPS Floor & Celling Plates With Spring

1/2"

Steel

Chrome Plated

897271

3/4" IPS Floor & Celling Plates With Spring

3/4"

Steel

Chrome Plated

897272

1" IPS Floor & Celling Plates With Spring

1"

Steel

Chrome Plated

897273

1 1/4" IPS Floor & Celling Plates With Spring

1 1/4"

Steel

Chrome Plated

897274

1 1/2" IPS Floor & Celling Plates With Spring

1 1/2"

Steel

Chrome Plated

897275

2" IPS Floor & Celling Plates With Spring

2"

Steel

Chrome Plated

897276

2-1/2" IPS Floor & Celling Plates With Spring

2 1/2"

Steel

Chrome Plated

897277

3" IPS Floor & Celling Plates With Spring

3"

Steel

Chrome Plated

897278

4" IPS Floor & Celling Plates With Spring

4"

Steel

Chrome Plated

897279

5" IPS Floor & Celling Plates With Spring

5"

Steel

Chrome Plated

897280

6" IPS Floor & Celling Plates With Spring

6"

Steel

Chrome Plated

897281

8" IPS Floor & Celling Plates With Spring

8"

Steel

Chrome Plated

897282

10" IPS Floor & Celling Plates With Spring

10"

Steel

Chrome Plated

Exclusively from Keller Supply

2018 Caitlin Catalog | 95

10


SHALLOW FLANGES

Shallow Flanges Product Features

FEATURES: • Fits iron pipe and copper tube

• Fits Iron Pipe and Copper Tube Chrome steel ••Chrome Platedplated Steel

Product Code

10

Description

IPS

CTS

Material

Finish

897525

3/8" IPS Shallow Flanges

3/8"

Steel

Chrome Plated

897526

1/2" IPS Shallow Flanges

1/2"

Steel

Chrome Plated

897527

3/4'' IPS Shallow Flanges

3/4"

Steel

Chrome Plated

897528

1" IPS Shallow Flanges

1"

Steel

Chrome Plated

897529

1 1/4" IPS Shallow Flanges

1 1/4"

Steel

Chrome Plated

897530

1 1/2" IPS Shallow Flanges

1 1/2"

Steel

Chrome Plated

897531

2" IPS Shallow Flanges

2"

Steel

Chrome Plated

897532

3/ 8" CTS Shallow Flanges

3/8"

Steel

Chrome Plated

897533

1/2" CTS Shallow Flanges

1/2"

Steel

Chrome Plated

897534

3/4" CTS Shallow Flanges

3/4"

Steel

Chrome Plated

897535

1" CTS Shallow Flanges

1"

Steel

Chrome Plated

897536

1 1/4" CTS Shallow Flanges

1 1/4"

Steel

Chrome Plated

897537

1 1/2" CTS Shallow Flanges

1 1/2"

Steel

Chrome Plated

897538

1 1/4" Tubular Shallow Flanges

1 1/4"

Steel

Chrome Plated

897539

1 1/2" Tubular Shallow Flanges

1 1/2"

Steel

Chrome Plated

897540

2" Tubular Shallow Flanges

2"

Steel

Chrome Plated

96 | 2018 Caitlin Catalog

Exclusively from Keller Supply


WATER HEATER PANS

Water Heater Pans Engineering Specification: Aluminum water heater pans can be installed under electric or gas water heaters to protect from water damage. Plastic water heater pans can be installed under electric water heaters to protect from water damage. All water heater pans come with 1" x 1½" PVC or 1" CPVC drain fittings to allow for connection to indirect drain.

● Manufactured from 22GA Aluminum sheet ● Come with pre-drilled hole ● 2½" Pan depth

Description

20" Aluminum water heater pan, 20GA thickness

CWHPPA20 20" 20"Aluminum Aluminumwater waterheater heater pan, 20GA thickness pan with 1" x 1½" PVC drain fittings, 22GA thickness CWHPPA22 22" 20" 20"Aluminum Aluminum Aluminumwater water water heater heater pan, pan, 20GA 22GA thickness thickness heater pan with 1" x 1½" PVC drain fittings, 22GA thickness 20" 20"Aluminum Aluminum Aluminumwater water water heater heater pan, pan, 20GA 22GA thickness thickness heater pan with 1" x 1½" PVC drain fittings, 22GA thickness CWHPPA24 24"

20"Aluminum Aluminum water heater thickness water heater panpan, with 22GA 1" x 1½" PVC drain fittings, 22GA thickness CWHPPA30 30" 20" waterheater heaterpan, pan,20GA 22GAthickness thickness 20" Aluminum Aluminum water 20"Aluminum Aluminumwater waterheater heater pan, 20GA thickness pan with 1" CPVC drain fittings, 22GA thickness CWHPCA20 20" 20" 20"Aluminum Aluminum Aluminumwater water water heater heater pan, pan, 20GA 22GA thickness thickness heater pan with 1" CPVC drain fittings, 22GA thickness CWHPCA22 22" 20"Aluminum Aluminumwater water heater pan, 20GA thickness 20" Aluminum water heater pan, 22GA thickness heater pan with 1" CPVC drain fittings, 22GA thickness CWHPCA24 24" 20"Aluminum Aluminum water heater thickness water heater panpan, with 22GA 1" CPVC drain fittings, 22GA thickness CWHPCA30 30"

Inside Diameter Inside

Outside Diameter Outside

20” 22”

21.75” 23.75” 25.75”

24” 30”

31.75”

20” 22” 24” 30”

21.75” 23.75” 25.75” 31.75”

Inside Diameter

Outside Diameter

23.5”

26”

23.5”

26”

20" Aluminum water heater pan, 22GA thickness

● Manufactured from 0.05" plastic sheet ● Come with pre-drilled hole ● 2½" Pan depth

Part No.

Description 20" Aluminum water heater pan, 20GA thickness

CWHPPP24 24" Plastic water heater pan with 1" x 1½" PVC drain fittings

20" waterheater heaterpan, pan,20GA 22GAthickness thickness 20" Aluminum Aluminum water

CWHPCP24 24" Plastic water heater pan with 1" CPVC drain fittings

20" Aluminum water heater pan, 22GA thickness

Part No. CPA112 CCA1

11

Description 20" Aluminum water heater pan, 20GA thickness 1" x 1½" PVC drain fittings

20" waterheater heaterpan, pan,20GA 22GAthickness thickness 20" Aluminum Aluminum water 24" Plastic water heater pan with 1" x 1½" PVC drain fittings 1" CPVC drain fittings 20" Aluminum water heater pan, 22GA thickness

Exclusively from Keller Supply

2018 Caitlin Catalog | 97


Water WATER HEATER STANDS

Heater Stands

MATERIAL:

18 HEAVY GAUGE GALVANIZED STEEL

HEIGHT:

18”

PL ATFORM DIMENSIONS:

21” x 21”

CAUTIONS:

Do not place tanks over 50 gallon capacity on water heater stand. Read Cautions and Installation Instruction carefully before using this product. KEEP OUT OF REACH OF CHILDREN. 650

APPLICATIONS:

Caitlin Water Heater Stand includes Seismic Clips for the State of California. Caitlin Water Heater Stand allows water heater tank 18” to place above floor level. Caitlin Water Heater Stand has two bracket to strengthen the stability of the stand.

11

ITEM NO. CWHS21

DESCRIPTION 21” Square x 18” High, w/Seismic Clips

98 | 2018 Caitlin Catalog

Exclusively from Keller Supply

LOAD RATING 650 lbs


BRASS TUBULAR P-TRAP

12

Exclusively from Keller Supply

2018 Caitlin Catalog | 99


BRASS FLANGED TAILPIECE

12

100 | 2018 Caitlin Catalog

Exclusively from Keller Supply


PLASTIC SLIP JOINT TUBULAR P-TRAP Plastic Slip Joint Tubular P Trap Product Features •Material: Poly Propylene and PVC/ABS •All Necessary Parts Included •IAPMO Listed

Adapter Part No.

Caitlin Model#

Dimensions in Inch

Description Style

Material

A

B

C

D

Color

Washer

901806

CA9704B

1-1/2 x 1-1/4 Plastic P Trap

Marvel

ABS

12-1/4"

4-5/8"

3-1/2"

8-3/4"

Black

LDPE

901810

CP9704BG

1-1/2 x 1-1/4 Plastic P Trap

Marvel

PVC

12-1/4"

4-5/8"

3-1/2"

8-3/4"

White

LDPE

901803

CP9704AB

1-1/2 x 1-1/4 Plastic P Trap

Marvel

ABS

12-1/4"

4-5/8"

3-1/2"

8-3/4"

White

LDPE

901934

CP9703WBG

1-1/2 x 1-1/4 Plastic P Trap w/Reversible J Bend

Marvel

PVC

12-1/4"

4-5/8"

3-1/2"

8-3/4"

White

Blue TPE

902223

CA9703WBG

1-1/2 x 1-1/4 Plastic P Trap w/Reversible J Bend

Marvel

ABS

12-1/4"

4-5/8"

3-1/2"

8-3/4"

Black

Blue TPE

902266

CA9701BG

1-1/4 Plastic P Trap

N/A

N/A

11-1/4"

4-5/8"

3-1/2"

7-3/4"

Black

LDPE

902491

CP9701BG

1-1/4 Plastic P Trap

N/A

N/A

11-1/4"

4-5/8"

3-1/2"

7-3/4"

Black

LDPE

12

Exclusively from Keller Supply

2018 Caitlin Catalog | 101


PLASTIC FLANGED TAILPIECE

Plastic Flanged Tailpiece Product Features •Material: Poly Propylene and PVC/ABS •Single and Double Ended Available •IAPMO Listed

Dimensions in Inch Part No.

Caitlin Model#

Description

Color A

B

C

902634

CA9800

1-1/2 x 6 Plastic Flanged Tailpiece

6"

1-1/2"

1-3/4"

Black

902240

CP9801

1-1/2 x 8 Plastic Flanged Tailpiece

8"

1-1/2"

1-3/4"

White

901940

CA9803E

1-1/2 x 16 Plastic Flanged Both End Tailpiece

16“

1-1/2"

1-3/4"

Black

901813

CP9803E

1-1/2 x 16 Plastic Flanged Both End Tailpiece

16“

1-1/2"

1-3/4"

White

12

102 | 2018 Caitlin Catalog

Exclusively from Keller Supply


PLASTIC SLIP JOINT EXTENSION TUBE Plastic Slip Joint Extension Tube Product Features •Material: Poly Propylene and PVC/ABS •All Necessary Parts Included •Single and Double Ended Available •IAPMO Listed

Dimensions in Inch Part No.

Caitlin Model#

Description

Color A

902509

CA9792A

1-1/2 x 8 Plastic Slip Joint Extension Tube

8-1/4"

Black

902478

CP9792A

1-1/2 x 8 Plastic Slip Joint Extension Tube

8-1/4"

White

902493

CP9793A

1-1/2 x 12 Plastic Slip Joint Extension Tube

12-1/4"

White

901938

CA9793E

1-1/2 x 16 Plastic Double Ended Slip Joint Extension Tube

16-1/2"

Black

901811

CP9793E

1-1/2 x 16 Plastic Double Ended Slip Joint Extension Tube

16-1/2"

White

902215

CP9791E

1-1/4 x 16 Plastic Double Ended Slip Joint Extension Tube

16-1/2"

White

12

Exclusively from Keller Supply

2018 Caitlin Catalog | 103


PLASTIC BRANCH TAILPIECE

Plastic Branch Tailpiece Product Features •Material: Poly Propylene and PVC/ABS •All Necessary Parts Included •Slip Joint and Hi-Line Connections Available •1/2” (5/8” OD) and 3/4” (7/8” OD) Branches Available •IAPMO Listed

Dimensions in Inch Part No.

Caitlin Model#

Description

Color A

B

C

902467

CAP9816

1-1/2 x 8 Plastic Branch Tailpiece, Slip Joint Top with 1/2 Branch

8"

1-1/2"

1-3/4"

Black

902485

CPP9816

1-1/2 x 8 Plastic Branch Tailpiece, Slip Joint Top with 1/2 Branch

8"

1-1/3"

1-3/4"

White

901964

CAP9817

1-1/2 x 8 Plastic Branch Tailpiece, Slip Joint Top with 3/4 Branch

8"

1-1/4"

1-3/4"

Black

901951

CPP9817

1-1/2 x 8 Plastic Branch Tailpiece, Slip Joint Top with 3/4 Branch

8"

1-1/5"

1-3/4"

White

902253

CAP9818

1-1/2 x 8 Plastic Branch Tailpiece, Hi-Line with 1/2 Branch

8"

1-1/6"

1-3/4"

Black

902241

CPP9818

1-1/2 x 8 Plastic Branch Tailpiece, Hi-Line with 1/2 Branch

8"

1-1/7"

1-3/4"

White

902246

CAP9819

1-1/2 x 8 Plastic Branch Tailpiece, Hi-Line with 3/4 Branch

8"

1-1/8"

1-3/4"

Black

901957

CPP9819

1-1/2 x 8 Plastic Branch Tailpiece, Hi-Line with 3/4 Branch

8"

1-1/9"

1-3/4"

White

12

104 | 2018 Caitlin Catalog

Exclusively from Keller Supply


ANGLE HOSE VALVE

Product Features Material:Product Body:Cast Brass

Features

Material: Finish: Body:Cast Brass Rough Brass Finish: Threads: Rough Brass

1-1/2" FNST x 1-1/2" MNST 2-1/2" FNST x 2-1/2" MNST

Threads:

1-1/2" FNST x 1-1/2" MNST 2-1/2" FNST x 2-1/2" MNST

Model Numbers

Description:

981309 1-1/2" FNST x 1-1/2" MNST Angle Hose Valve 981315 2-1/2" FNST x 2-1/2" MNST Angle Hose Valve

Model Numbers

981309 1-1/2" FNST x 1-1/2" MNST Angle Hose Valve 981315 2-1/2" FNST x 2-1/2" MNST Angle Hose Valve

Angle hose valves feature all brass construction with forged or cast bodies forDescription: rigidity and light weight. Typical uses are hose in rack assemblies Angle valves feature all brass or any other application which construction with forged or cast requires abodies listed fire valve. for hose rigidity and light weight. Available Typical in roughuses brass with a red are in rack assemblies hand wheel. UL Listed, FM or any other application which Approved. Rated 300psi requires a listed fire hose valve.

Available in rough brass with a red hand wheel. UL Listed, FM Approved. Rated 300psi

*Contains lead. Not for use in water systems intended for human consumption.

*Contains lead. Not for use in water intended for human consumption.

*Contains lead. Not for use in water intended for human consumption.

13

Exclusively from Keller Supply

2018 Caitlin Catalog | 105


AUTOMATIC BALL DRIP

*Contains lead. Not for use in water systems intended for human consumption.

13 106 | 2018 Caitlin Catalog

Exclusively from Keller Supply


CAP & CHAIN

Features ProductProduct Features Material: Material: Cast Brass Cast Brass Finish: Finish: Rough Brass Rough Brass Threads:

Threads:

1 -1/2” NST T Threads 1 -1/2” NST T Threads 2 -1/2” NST T Threads 2 -1/2” NST T Threads

Model Numbers Model Numbers

981330 1-1/2" NST Thread Cap & Chain 981330 1-1/2" NST Thread Cap & Chain 981331 2-1/2" NST Thread Cap & Chain 981331 2-1/2" NST Thread Cap & Chain

Description: Description:

Brass caps feature all cast brass Brass caps feature all cast brass alloy and is complete with a gasket. alloy and is complete with a gasket. Each cap is accurately machined and Each cap is accurately machined and will provide years of service. Each will provide years of service. Each cap is shipped complete with a cap is shipped complete with a brass chain and S type hook for brass chain and S type hook for attachment to hydrant or hose type attachment to hydrant or hose type valve equipped for this use. Protects valve equipped for this use. Protects male threads and discourages the male threads and discourages the introduction of debris into the introduction of debris into the hydrant or valve. Suitable for fire hydrant or valve. Suitable for fire protection or industrial use. protection or industrial use.

13

Exclusively from Keller Supply

2018 Caitlin Catalog | 107


CONNECTION BREAKABLE CAPS

13 108 | 2018 Caitlin Catalog

Exclusively from Keller Supply


PENDANT CUP

Product Features Product Features Material: Material:Steel Steel Finish: Finish: Chrome Plated Chrome Plated White White Sizes: 1/2"

Model Numbers Model Numbers 979657 1/2" Pendant Cup, Chrome

979657 1/2"982274 Pendant Cup, Chrome 1/2" Pendant Cup, White 982274 1/2" Pendant Cup, White

Sizes: 1/2"

Description: Description: The Pendant Cup has been designed to The Pendant Cup has designed to provide anbeen aesthetically pleasing provide an concealment aesthetically of pleasing the sprinkler piping concealment of the sprinkler pipingsprinkler head. servicing the individual servicing the individual head. The Pendant sprinkler Cup has a full 2â&#x20AC;? of field The Pendant Cup has a making full 2â&#x20AC;? ofitfield adjustment, possible to adjustment,accommodate making it possible minorto irregularities in accommodate minor irregularities ceiling to sprinkler headinlocation. This ceiling to sprinkler head location. This assures complete concealment of the assures complete of the only the ceiling concealment penetration allowing ceiling penetration only the sprinklerallowing to be exposed. sprinkler to be exposed.

13

Exclusively from Keller Supply

2018 Caitlin Catalog | 109


REDUCERS

*Contains lead. Not for use in water systems intended for human consumption.

13 110 | 2018 Caitlin Catalog

Exclusively from Keller Supply


ROUND EXTENSION PIECE

*Contains lead. Not for use in water systems intended for human consumption.

13

Exclusively from Keller Supply

2018 Caitlin Catalog | 111


ROUND IDENTIFICATION PLATE

13 112 | 2018 Caitlin Catalog

Exclusively from Keller Supply


SIGHT GLASS

*Contains lead. Not for use in water systems intended for human consumption.

13

Exclusively from Keller Supply

2018 Caitlin Catalog | 113


SINGLE CLAPPER 2-WAY

13 114 | 2018 Caitlin Catalog

Exclusively from Keller Supply


SPEAR HEAD CAPCITY STORAGE CABINET

13

Exclusively from Keller Supply

2018 Caitlin Catalog | 115


STANDARD SKIRT CHROME

13 116 | 2018 Caitlin Catalog

Exclusively from Keller Supply


THREE-WAY GAUGE VALVE

13

Exclusively from Keller Supply

2018 Caitlin Catalog | 117


TWO PIECES RECESSED CANOPY

13 118 | 2018 Caitlin Catalog

Exclusively from Keller Supply


Exclusively from Keller Supply

3209 17th Avenue West. • Seattle, WA 98119 • 800-285-3302

Profile for Keller Supply Company

Caitlin 2018 Product Catalog  

Supplies, Registers, Valves, Fire Protection Effective May 1, 2018

Caitlin 2018 Product Catalog  

Supplies, Registers, Valves, Fire Protection Effective May 1, 2018