Issuu on Google+

MATERIAL DATASHEET 26 KE-no.: Construction: Final treatment:

026400 Polyester weave coated with thermoplastic coating Coloured, dirt-repelling finish on the surface and protected with an antimicrobial product in order to give it a long-term protection against a wide range of bacterial and fungal attacks. This will help prevent surface growth, musty odour, permanent staining, embrittlement, and premature product failure. g/m²: 300 (%) -10/+10 mm: 0,42 (%) -10/+10 N/50 mm: 210 / 160 (%) -10/+10 %: 55 / 120 N: 25 / 30 (%) -10/+10 m³/m²/h: 0 at 120 Pa (%) -0/+0 : %: -

Weight Thickness Tensile strength warp/weft Elongation (at first break) Resistance to tearing warp/weft Permeability Retention grade Shrinkage in wash

Fire resistance Melting point Spontaneous ignition temperature Water absorption (in standard climate) Electrostatic resistance Operating temperature max./min. (peak)

: °C: °C: %: Ohm/cm: °C:

Resistance to aging Resistance to vibrations, motion Resistance to solvents Resistance to acids Resistance to bases Resistance to oxidants, light, etc.

: : : : : :

Flame retardant 170 11 1,7 x 10 +40/-0 (peak: 50) Medium Good Not Recommended Medium Medium Medium

Ps [Pa] 210 180 150 120 90 60 30 0

Quality grades: Comments:

0

10

20

30

40

50

60

70

80

100 90 qp [m³/m²/h]

Excellent • Good • Medium • Less good • Not recommended (*) Recomm. KE-measurement • (**) Washed and dried acc. to KE Fibertec instruction

This document and all information thereon is the property of KE Fibertec AS. It must not be copied, imparted to a third party or used for any other purpose without the written consent of KE Fibertec AS. Data are subject to alterations.

ĞĐ͘ϮϬϭϮ


Datasheet 2012 GB - 026400