Issuu on Google+

PORTMAN POCKET DOORS

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au

Pocket door systems Sliding door gear

Space making doorsets


PORTMAN POCKET DOORS

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au

w w w. p o r t m a n - p o c k e t d o o r s . c o . u k


PORTMAN POCKET DOORS

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au

PORTMAN pocket door systems In the UK there is an increasingly stark requirement for high quality housing, however, as population densities increase and average property sizes decrease, the need to develop innovative ways of utilising the finite space available is facilitating the development of new products and solutions. The Portman pocket door system is ideal where design flexibility and space saving are of prime importance. Being able to slide a kitchen, bedroom or bathroom door within a wall and out of the way saves about 6% of the overall floor area or 10 sq ft per door. Designed and produced in the UK, the Portman pocket door system comprises the latest sliding door technology, quality robust components and an exceptionally easy installation. With Portman, specifying pocket door options is easy. Any standard timber door blank or frameless glass panel can be used and there are no bottom rails mounted into the flooring creating a dust trap or trip hazard. Door leaves are held in place to prevent wobble or sway. High quality rollers and bearing surfaces will provide years of maintenance free service and consistent high performance. Typical Portman pocket door installations • A single door leaf (e.g. a kitchens or bathrooms) • Two doors converging/bi-parting (e.g. as lounge/dining room dividers). These can also be opened/closed simultaneously. • Large leaves can be used as screens to separate bedroom & living areas and facilitate flexible/open plan schemes whilst allowing users to maintain privacy when needed.

w w w. p o r t m a n - p o c k e t d o o r s . c o . u k 1


PORTMAN POCKET DOORS

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au

EASE of use & Accessibility Reducing barriers For most people, opening a manual door is a combination of gripping and depressing a lever handle, pulling/pushing whilst ‘side stepping’ the arc of the door and then moving forwards or backwards with the door. To carry out this exercise is much harder if the user has, for example, poor grip, reduced muscle power and balance. Getting close enough to, or reaching for, the handle can be difficult. Harder again, if one has to move ones body or mobility aid out of the path of the door as one is trying to open it, and indeed hold it open whilst trying to pass through. This is compounded, yet again if the hands are needed to hold a cane or crutches, move a wheelchair or frame. Other factors increasing the degree of difficulty include door closers, small lobbies, narrow corridors and small clear opening widths. Little wonder that, to many people – a door is a significant barrier. The Portman Pocket Door System reduces some of the typical swing door barriers presented to disabled people, thereby making buildings and dwellings more independently accessible or ‘inclusive’. These benefits are evident in several areas: Clear opening widths Portman door width options give access to the full range of wheelchair users as defined by the BS 8300. The ‘wide’ option is especially good for 90° turns for larger wheelchairs, assistant pushed and battery power chairs – important because a minimum statutory corridor width is 1200mm in

Standard door A minimum of 1.85m2 additional floor area is required for a standard indoor manual wheelchair. User must be able to operate the door and manoeuvre chair simultaneously.

buildings (900mm in dwellings) and a wheelchair/scooter can be 1520mm to 1600mm long. The ‘standard’ 626–926 width option can also be useful for ambulant disabled people with limited reach due to the comparatively small movement required to operate the door. Sliding leaf When opening/closing the door leaf slides into a pocket. It does not swing into the space adjacent to the door face, thereby allowing: The user to remain stationary whilst opening the door, avoiding having to move him/herself and his/her mobility aid beyond the leading edge of a swinging door leaf. Providing an alternative solution to the AD ‘M’ requirement for WC compartment doors, (and doors to wheelchair-accessible sanitary provision), to open outwards in an emergency. If a user collapses behind the door, it can simply be slid open. Avoiding door projection into adjacent corridor circulation or escape routes. User Operation For manual opening/closing of the door Portman recommend leaving a portion of the door leaf proud of the pocket (in the fully open position) and the use of projecting handles. This arrangement has the duel benefits of the easily opened pocket door and easily operated door furniture, for e.g. those with dexterity problems. For guidance on laying out for this type of door-set please contact the sales office.

Pocket door Wheelchair can remain stationary during door opening.

903

830

Must stretch, open door and move chair all at the same time.

1200

Can remain static and open manual door

903

2126 1200 3.46m² 1.614m² 1345

w w w. p o r t m a n - p o c k e t d o o r s . c o . u k 2


PORTMAN POCKET DOORS

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au


PORTMAN POCKET DOORS

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au

THE BENEFITS of installing a Portman pocket door system The Portman proposal is unique. A patented design uses the latest developments in materials engineering in a combination that maximises wall and cassette stability, provides for easy flexible installation and unrivalled aesthetic detailing. • The Portman cassette is constructed from specially designed ‘Z’ section profiles. As any architect or engineer knows, strength is best derived from a materials profile.

Standard Specifications • Door leaves up to 2700mm high as standard • Individual door leaf widths up to 1500mm • Individual door leaves of up to 80Kg • Timber/framed door leaves up to 44mm thick or frameless glass 8–12mm thick

The Portman sections slide within each other to provide not only a flexible width cassette but one which is also easily height adjustable. • The Portman track mounting unit is constructed from timber laminate which reduces noise and vibration as opposed to traditional metal profile sections which often result in a “tinny” tactile experience. • White aluminium track provides for a discreet aesthetic finish, further reducing the impact of the door-set. This is of particular use when installing full height doors fitted flush with the ceiling. • The unique track profile incorporates trolley stabilising ridges within the design. • Die cast roller bodies are light and strong. Delrin wheels incorporate a ball race for exceptionally fluid motion. Delrin covered wheels offer high tensile strength, impact resistance and exceptional fatigue endurance. Delrin resists moisture, solvents and potentially damaging atmospheric conditions, it also maintains its natural lubricity throughout its life. • Bespoke timber door lining profiles are moulded from Poplar, sourced from sustainable suppliers. Poplar is a highly stable and readily available hardwood with few imperfections. Poplar can be very accurately moulded in long lengths, ideal for tall elevations.

w w w. p o r t m a n - p o c k e t d o o r s . c o . u k 4


PORTMAN POCKET DOORS

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au

HOW TO choose the right kit 1) Decide what is your constraining factor. Either the door leaf size OR the wall aperture will constrain what should be specified. For example, to fit a door leaf of 826mm wide x 2040mm high requires a calculable wall opening (see dimensions on individual pages). Alternatively, a fixed wall opening can only accommodate a door of a certain size. 2) Choose the appropriate door kit from the selection. 3) If ancillary items such as flush door brackets or flush door furniture are required, please select from the appropriate pages.

Portman Options… Standard Hangers/Standard Kit Single & Double door leaves..................................................................pages 6–7

Flush Hangers/Standard Kit Single & Double door leaves (for example, if flush fitting track to ceiling).............................................pages 8–9

Architrave free, (with flush hangers) Single & Double door leaves..............................................................pages 10–11

Kits for curved door leaves, (1.5m Radius) Single & Double door leaves............................................................... page 12–13

Telescopic doorset (two doors in one cassette) two leaves – single set/four leaves – double set........................................ page 16 SP

Converging/simultaneous doorset (double doorset assemblies)................ Page 17 W

OP2 SP

OP1

54.0

MIN 21 MAX 30

H

W

125.0

FD30 (suitable for use with FD30 leaves) Single leaves only............................................................................... page 18–19

45.0

HP

15.0

FINISHED FLOOR LEVEL 11.0 8.0

Self Closing & Damper Unit options.......................................................... page 20

Fully Powered (for standard hanger kits) Push button open/close. Single leaves only.............................................. page 21

Frameless glass door leaf clamps (complete with bespoke timber framing)................................................... page 23

Flush fitting handles (flush pulls and privacy sets)............................... .page 24–25

iVEGA (statement sliding door gear) Brushed / Polished Stainless Steel.....................................................pages 26–29

w w w. p o r t m a n - p o c k e t d o o r s . c o . u k 5


PORTMAN POCKET DOORS

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au

PLASTERBOARD

H

45

MIN 21 MAX 30

H

FINISHED FLOOR LEVEL 8

7

OP

FINISHED FLOOR LEVEL 7

W

8

SP

45

MIN 21 MAX 30

HP

OH

H

HP

H

OH OP

54

JAMB TRACK PACKER HEAD JAMB

W

SP

PLASTERBOARD

125 TRACK PACKER STUDDING HEAD

54

25.0

W

125 STUDDING

125.0

25.0

125.0

PORTMAN Single timber door leaves

For doors over 2700mm high or 1500mm wide, please contact the sales office. If self-closing/damper units are required, please request at time of order. If ordering for frameless glass door leaves (individual leaf up to 1280mm wide only), please choose “0”-suffixed kit from the standard/intermediate kits below, glass clamps and timber jambs, page 23.

Dimensions (max door thickness 44mm) Single Door Wp = Door panel width Sp = Wp-9mm Hp = Door panel height Op = Wp-23mm W = (2Wp)+11mm Oh = Hp-7mm H = Hp+95mm

Single door kits Standard door leaves (up to 2100mm high)

Tall door leaves (up to 2700mm high)

Description Standard width door leaf 626–926mm wide Inclusive of timber door linings

P7000 SD P7001 SD

Description Tall door leaf 626–926mm wide Inclusive of timber door linings

Intermediate width door leaf 927–1300mm wide Inclusive of timber door linings

P7000 ID P7001 ID

Tall/Intermediate width door leaf 927–1300mm wide Inclusive of timber door linings

P7000 ITD P7001 ITD

Wide door leaf 1301–1500mm wide Inclusive of timber door linings

P7000 WD P7001 WD

Tall/Wide door leaf 1301–1500mm wide Inclusive of timber door linings

P7000 WTD P7001 WTD

Part No

w w w. p o r t m a n - p o c k e t d o o r s . c o . u k 6

Part No P7000 TD P7001 TD


PORTMAN POCKET DOORS

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au

PORTMAN Double timber door leaves

W

Dimensions (max door thickness 44mm) Double Doors Wp = Door panel width Sp = Wp-9mm Hp = Door panel height Op = (2Wp)-34mm W = (4Wp)-16mm Oh = Hp-7mm H = Hp+95mm

If simultaneous opening/closing is required, please state at time of order. Self-closing and simultaneous opening cannot be used together.

Double door kits Standard door leaves (up to 2100mm high)

Tall door leaves (up to 2700mm high)

Description Standard width door leaf 626–926mm wide Inclusive of timber door linings

P7000 DD P7001 DD

Description Tall door leaf 626–926mm wide Inclusive of timber door linings

Intermediate width door leaf 927–1300mm wide Inclusive of timber door linings

P7000 IDD P7001 IDD

Tall/Intermediate width door leaf 927–1300mm wide Inclusive of timber door linings

P7000 ITDD P7001 ITDD

Wide door leaf 1301–1500mm wide Inclusive of timber door linings

P7000 WDD P7001 WDD

Tall/Wide door leaf 1301–1500mm wide Inclusive of timber door linings

P7000 WTDD P7001 WTDD

Part No

w w w. p o r t m a n - p o c k e t d o o r s . c o . u k 7

Part No P7000 TDD P7001 TDD


PORTMAN POCKET DOORS

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au

PORTMAN Timber leaves with flush door bracket kits The use of a flush bracket enables the head of the door to be put in close proximity to the frame, effectively only leaving a shadow gap. 125 STUDDING

PLASTERBOARD TRACK PACKER

TRACK MOUNT 54

Min 3 Max 10

HP

H

7

8 FINISHED FLOOR LEVEL

W=1863

Dimensions (max door thickness 44mm) Single Door Wp = Door panel width Sp = Wp-9mm Hp = Door panel height Op = Wp-23mm W = (2Wp)+11mm Oh* = Hp-30mm H = Hp+72mm

*

Doors can be installed full height, excluding the head jamb (see above). In this instance Oh = Hp+14mm.

205

205

Single door kits Standard door leaves (up to 2100mm high)

Tall door leaves (up to 2700mm high)

Description Standard width door leaf 626–926mm wide Inclusive of timber door linings

P7100 SDF P7101 SDF

Description Tall door leaf 626–926mm wide Inclusive of timber door linings

Intermediate width door leaf 927–1300mm wide Inclusive of timber door linings

P7100 IDF P7101 IDF

Tall/Intermediate width door leaf 927–1300mm wide Inclusive of timber door linings

Wide door leaf 1301–1500mm wide Inclusive of timber door linings

P7100 WDF P7101 WDF

Tall/Wide door leaf 1301–1500mm wide Inclusive of timber door linings SP

H=2172

Part No

w w w. p o r t m a n - p o c k e t d o o r s . c o . u k 8

Part No P7100 TDF P7101 TDF

P7100 ITDF P7101 ITDF

P7100 WTDF P7101 WTDF OP

OH=2117


PORTMAN POCKET DOORS

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au

W

Dimensions (max door thickness 44mm) Double Doors Wp = Door panel width Sp = Wp-9mm Hp = Door panel height Op = (2Wp)-34mm W = (4Wp)-16mm Oh* = Hp-30mm H = Hp+72mm

Self-closing or simultaneous (for double door) options cannot be specified with flush brackets due to the close proximity of door head to framing. If concealing the bracket behind, (for example, a timber plug), this should be removable, to extract the bracket if needed.

*

Doors can be installed full height, excluding the head jamb (see above). In this instance Oh = Hp+14mm.

Double door kits Standard door leaves (up to 2100mm high)

Tall door leaves (up to 2700mm high)

Description Standard width door leaf 626–926mm wide Inclusive of timber door linings

P7100 DDF P7101 DDF

Description Tall door leaf 626–926mm wide Inclusive of timber door linings

Intermediate width door leaf 927–1300mm wide Inclusive of timber door linings

P7100 IDDF P7101 IDDF

Tall/Intermediate width door leaf 927–1300mm wide Inclusive of timber door linings

P7100 ITDDF P7101 ITDDF

Wide door leaf 1301–1500mm wide Inclusive of timber door linings

P7100 WDDF P7101 WDDF

Tall/Wide door leaf 1301–1500mm wide Inclusive of timber door linings

P7100 WTDDF P7101 WTDDF

Part No

w w w. p o r t m a n - p o c k e t d o o r s . c o . u k 9

Part No P7100 TDDF P7101 TDDF


PORTMAN POCKET DOORS

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au

ARCHITRAVE free For installations where a minimal aesthetic is required and where the door opening needs to be frameless (i.e. without architrave), Portman offers a range of heavy duty custom door frame beading sections. These sections enable the skim coat to be painted/finished to blend in with the door frame for a minimalist aesthetic.

STU

W

TRACK PA

As standard, kits accommodate maximum 44mm thick door leaves. Kits are also are supplied with flush bracket sets (see flush bracket kit for details).

OH

*Can accommodate frameless glass leaves of up to 1280mm wide. Please add part suffix “G” to either standard OR intermediate width options below, for further information and glass panel dimensions please see P1280 on page 23. For glass doors, the leading edge jamb is a “flat” rather than a rebated section. When using P1280 clamps with P7300 kits the door leaf to wall aperture dimensions differ from those stated below, please refer to dimensions in appropriate boxes.

H

N.B. Self closing and simultaneous opening (for double doors) cannot be specified with Architrave free/flush bracket sets.

FINI

OP

Dimensions Single Door Wp = Door panel width Sp = Wp+24mm Hp = Door panel height Op = Wp-28mm W = (2Wp)+12mm Oh = Hp+14mm H = Hp+70mm Dimensions (using P1280 glass clamps) Single Door Wp = Door panel width Sp = Wp+11mm Hp = Door panel height Op = Wp-25mm W = (2Wp)-12mm Oh = Hp+64mm H = Hp+119mm

205

205

Single door kits Standard door leaves (up to 2100mm high)

Tall door leaves (up to 2700mm high)

Description Standard width door leaf 626–926mm wide

P7300 SDE*

Description Tall door leaf 626–926mm wide

Intermediate width door leaf 927–1300mm wide

P7300 IDE*

Tall/Intermediate width door leaf 927–1300mm wide

P7300 ITDE*

Wide door leaf 1301–1500mm wide

P7300 WDE

Tall/Wide door leaf 1301–1500mm wide

P7300 WTDE

Part No

w w w. p o r t m a n - p o c k e t d o o r s . c o . u k 10

Part No P7300 TDE*


PORTMAN POCKET DOORS

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au

126 STUDDING

PLASTERBOARD

8.0

HP

H

Min 3 Max 10

TRACK PACKER

FINISHED FLOOR LEVEL

Dimensions Double Doors Wp = Door panel width Sp = Wp+24mm Hp = Door panel height Op = (2Wp)-32mm W = (4Wp)+18mm Oh = Hp+14mm H = Hp+70mm Dimensions (using P1280 glass clamps) Double Doors Wp = Door panel width Sp = Wp+11mm Hp = Door panel height Op = (2Wp)-50mm W = (4Wp)-26mm Oh = Hp+64mm H = Hp+119mm

Double door kits Standard door leaves (up to 2100mm high)

Tall door leaves (up to 2700mm high)

Description Standard width door leaf 626–926mm wide

P7300 DDE*

Description Tall door leaf 626–926mm wide

Intermediate width door leaf 927–1300mm wide

P7300 IDDE*

Tall/Intermediate width door leaf 927–1300mm wide

P7300 ITDDE*

Wide door leaf 1301–1500mm wide

P7300 WDDE

Tall/Wide door leaf 1301–1500mm wide

P7300 WTDDE

Part No

w w w. p o r t m a n - p o c k e t d o o r s . c o . u k 11

Part No P7300 TDDE*


PORTMAN POCKET DOORS

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au

CURVED pockets for curved door leaves Having a curved pocket door kit to accommodate a curved door provides the designer with a unique opportunity to create something really special.

H

OH

The Portman curved kits accommodate leaves with a 1.5m radius (centreline of door leaf) as standard and the door frame detailing is as per the standard kit with surface mounted hangers and a curved head section to them.

OP W Centre line of kit

0

50

R1

Dimensions Single Door (along centre line) Wp = Door panel width Sp = Wp-9mm Hp = Door panel height Oh = Hp-7mm W = (2Wp)+12mm Op examples: H = Hp+95mm WP OP 726mm 668mm 826mm 760mm 926mm 852mm

Single door kits Standard door leaves (up to 2100mm high)

Tall door leaves (up to 2700mm high)

Description Standard width door leaf 626–926mm wide inclusive of timber door linings

P7700 SDC P7701 SDC

Description Tall door leaf 626–926mm wide inclusive of timber door linings

P7700 IDC P7701 IDC

Tall/Intermediate width door leaf 927–1300mm wide inclusive of timber door linings

Intermediate width door leaf 927–1300mm wide inclusive of timber door linings

Part No

w w w. p o r t m a n - p o c k e t d o o r s . c o . u k 12

Part No P7700 TDC P7701 TDC

P7700 ITDC P7701 ITDC


PORTMAN POCKET DOORS

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au

Dimensions Double Doors (along centre line) Wp = Door panel width H = Hp+95mm Hp = Door panel height Sp = Wp-9mm W = (4Wp)-11mm Oh = Hp-7mm

Double door kits Standard door leaves (up to 2100mm high)

Tall door leaves (up to 2700mm high)

Description Standard width door leaf 626–926mm wide inclusive of timber door linings

P7700 DDC P7701 DDC

Description Tall door leaf 626–926mm wide inclusive of timber door linings

P7700 IDDC P7701 IDDC

Tall/Intermediate width door leaf 927–1300mm wide inclusive of timber door linings

Intermediate width door leaf 927–1300mm wide inclusive of timber door linings

Part No

w w w. p o r t m a n - p o c k e t d o o r s . c o . u k 13

Part No P7700 TDDC P7701 TDDC

P7700 ITDDC P7701 ITDDC


PORTMAN POCKET DOORS

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au


PORTMAN POCKET DOORS

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au


PORTMAN POCKET DOORS

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au

TELESCOPIC doorset The Portman telescopic doorset effectively allows two door leaves to be concealed in one wall (on the same side) and enable almost a double span to be traversed. The door leaves are linked via a toothed belt and pulley system so as the user extracts the first door leaf the second is gently brought along with it, and conversely the opposite happens when the doors are opened, back within the wall.

44.0

The doorset is non-handed and timber framing is supplied offset as only one leaf makes 35.0contact with the closing jamb.

OH

W

H

HP

177.0

44.0

OP

35.0

177.0

W

OH

H

HP

Dimensions Double Doors Wp = Door panel width Sp = Wp+22mm Hp = Door panel height Op = (2Wp)-58mm W = (3Wp)+7mm Oh = Hp-7mm H = Hp+95mm

Single door kits OP Standard door leaves (up to 2100mm high)

Tall door leaves (up to 2700mm high)

Description Standard width door leaf 626–926mm wide inclusive of timber door linings

P7400 SD P7401 SD

Description Tall door leaf 626–926mm wide inclusive of timber door linings

P7400 ID P7401 ID

Tall/Intermediate width door leaf 927–1300mm wide inclusive of timber door linings

Intermediate width door leaf 927–1300mm wide inclusive of timber door linings

Part No

w w w. p o r t m a n - p o c k e t d o o r s . c o . u k 16

Part No P7400 TD P7401 TD

P7400 ITD P7401 ITD


PORTMAN POCKET DOORS

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au

CONVERGING/simultaneous doorset

SP

W

SP

OP2

OP1

With two doors operating into (or out of a corner depending W on what side you are standing) offers a further extension of the space saving theme. The doors can operate independently or be linked and move simultaneously. Ideal sites/installations OP2 include a corner kitchen or a home office off an open plan lounge or even a bedroom where flexible living is desired which may need to be accessible for much of the day and hidden from sight when not in use.

MIN 21 MAX 30

H

MIN 21 MAX 30

125.0

45.0

HP

SP 15.0

FINISHED FLOOR LEVEL 11.0 8.0

OP1 W

125.0

54.0

H

54.0

45.0

HP SP

54.0

125.0

W 15.0

MIN 21 MAX 30

OP2 FINISHED FLOOR LEVEL

45.0

SP

11.0 8.0

OP1

Dimensions Double Doors Wp = Door panel width Hp = Door panel height W = (Wp)+65mm H = Hp+95mm

W

125.0

54.0

Sp = Wp-9mm Op1 = Wp-16mm Op2 = Wp+28mm MIN 21 Oh = Hp-7mm

H

HP

45.0

MAX 30

Double door kits only

15.

Standard door leaves (up to 2100mm high)

Tall door leaves (up to 2700mm high)

H HP Description Standard width door leaf 626–926mm wide inclusive of timber door linings

P7800 DD P7801 DD

Description Part No FINISHED FLOOR LEVEL Tall door leaf 11.0 TDD 626–926mm wide P7800 inclusive of timber door linings P7801 TDD

15.0 P7800 IDD P7801 IDD

Tall/Intermediate width door leaf 927–1300mm wide inclusive of timber door linings

Part No

Intermediate width door leaf 927–1300mm wide inclusive of timber door linings FINISHED FLOOR LEVEL 11.0

8.0

w w w. p o r t m a n - p o c k e t d o o r s . c o . u k 17

P7800 ITDD P7801 ITDD

8.0


PORTMAN POCKET DOORS

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au

SELF-closer and Damper kits Portman self closing and self closing/damper assemblies are unique. Doors can be held back within the cassette and when gently nudged by the user will self close. The damper options or “soft-close” units catch the door in the last few centimetres and gently pull it into the fully closed position thus avoiding slamming which alleviates stress on the surrounding doorframe and helps prevent finger traps. Closer/damper kits are suitable for timber/framed door leaves of up to 40kg or 80kg and 1450mm wide.

PC1 1x self-closer (1.5lb) with damper; complete with non‑handed fixing bracket and 1x magnetic hold open/release. For doors up to 40kg and up to 1450mm wide. PC2 1x self-closer (2lb) with 2no dampers; complete with non‑handed fixing bracket and 1x magnetic hold open/release. For doors 40–80kg and up to 1450mm wide. PC3 1x soft close damper; complete with non‑handed fixing bracket) for doors up to 40kg.

PC4 2x soft close dampers; complete with non‑handed fixing bracket for doors 40–80kg. PC5 1x self-closer (1.5lb) with damper, complete with non‑handed fixing bracket and electromagnet hold open/release. For doors up to 40kg and up to 1450mm wide. PC6 1x self-closer (2lb) and 2x dampers, complete with non‑handed fixing bracket and electromagnet hold open/release. For doors 40-80kg and up to 1450mm wide.

w w w. p o r t m a n - p o c k e t d o o r s . c o . u k 20


PORTMAN POCKET DOORS

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au

POWERED Opening/Closing and locking Being able to have the door slide open and closed (and lock if necessary) at the push of a button is exceptionally user friendly and offers huge potential benefits, especially when considering, for example, accessible WCs and inclusive design in general. The Portman powered unit is concealed at the head of the door, is low voltage and has been tested to over 200,000 cycles. • Fully automated system for use with single leaf Portman kits (not flush bracketed options) • Maximum leaf weight 80kg • 1/3rd speed on final opening/closing approaches • PSU/Programmer can be located remotely in a convenient position • Motor can be easily removed for maintenance Notes: If the outside button is pushed whilst the door is open, the door closes but remains unlocked. If the door encounters soft obstruction during closing, it stops and auto reverses to the fully open position.

Fixing Grub Screw

Spring x1 Stop x1

An external key/break glass emergency access can be accommodated.

1 x Track

If there’s a power cut the system is disabled and the door can be pulled open manually.

1 x Motor Mounting Block Belt Clamp Plate x 2 220mm

220mm Idler Blockx 1 2 x Belt Clamp Block

Typical logic for system Outside: Push button, door opens. Inside: Push button, door closes and locks on electromagnetic lock (if specified) and outside button is disabled.

Motor and Pulley x 1

Pulley Guard x1

Inside: Push button door unlocks and opens. After 10mins of inactivity, door closes. Kit includes • Motor • Drive belt • Door mounted clamps • Combined PSU/programmer

220mm

220mm

• Door position sensors • Belt return assembly

Single door kits (only) PWSS100:

Kit for single leaves up to 926mm

PWSW100:

Kit for single leaves up to 1500mm

P7520:

Electromagnetic lock and door mounted armature plate

P7601 BK:

38mm switch ONLY. Lights red when closed or locked (user determined)

P7601 BK BS: 38mm switch mounted on flat 88mm square backplate (BSS). Lights red when closed or locked (user determined)

w w w. p o r t m a n - p o c k e t d o o r s . c o . u k 21


PORTMAN POCKET DOORS

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au

w w w. p o r t m a n - p o c k e t d o o r s . c o . u k 22


PORTMAN POCKET DOORS

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au

PORTMAN frameless glass door clamps Within the Portman an additional glass door kit can be supplied to accommodate frameless glass door leaves. These kits use specialist glass door clamps containing a safety pin and, for the P880/1280, a clamp covering profile.

P1280 • Maximum individual door leaf weight 80Kg • Suitable for glass panels between 8–12mm thick • For door leaves up to 1280mm wide • Glass panel to be supplied by specialist manufacturer Includes: • Glass door clamps • Full width glass door valence • Valence end caps • Door bottom guide, to suit frameless glass leaves

P1280 for door leaves up to 1280mm wide

Door drilling positions 8.5 35

Dimensions (when using jamb sets below) Double Doors Lp = Door panel width Sp = Wp-9mm Hp = Door panel height Op = (2Wp)-34mm W = (4Wp)-16mm Oh = Hp+24mm H = Hp+119mm

150.0 minimum

150.0 minimum

14.5

20.5

Dimensions (when using jamb sets below) Single Door Wp = Door panel width Sp = Wp-9mm Hp = Door panel height Op = Wp-25mm W = (2Wp)+11mm Oh = Hp+24mm H = Hp+119mm

HP

H

69

125

2 ∅10.0 Holes for safety pin.

Frameless glass – timber jambs The below timber jamb sets are to be used in addition to the Standard pocket door kits (suffixed “0”) on pages 4 and 5, and P1280 glass door clamps above. Jamb sets are supplied complete with brush seals. 44.0

Single door kits Description Standard single door kit

Part No PGTKS 125

Intermediate/wide single door kit

PGTKSW 125

Tall standard single door kit

PGTKST 125

Tall intermediate/wide single door kit

PGTKSWT 125

3.0 26.0

26.0 44.0

32.0

18.0

Double door kits Standard double door kit

PGTKDS

Tall double door kit

PGTKDT

53.5 45.0

25.0

125.0

For intermediate/wide double jamb sets please contact the sales office. w w w. p o r t m a n - p o c k e t d o o r s . c o . u k 23


PORTMAN POCKET DOORS

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au

POCKET and sliding door furniture Flush pull & bathroom sets for timber doors ART: flush pull sets are unique, comprised of the latest laser-cut stainless steel faceplates with a unique self gripping carrier. Round, square, oval and rectangle profiles are available, with and without the sprung loaded return plate. Handles are supplied in pairs, complete with a leading-edge door pull.

Circular 75mm dia x 17mm deep flush pull excluding push return plate

P7502 CU

As above, complete with push return plate

P7502 CF

19

75

Part No ∅

Description

4

∅5

2

5 19

Square 70x70mm x 17mm deep flush pull excluding push return plate

P7503 SU

As above, complete with push return plate

P7503 SF 5

50 70

2

As above, complete with push return plate

P7501 RF

R1 25 45 39

Finish: Satin Stainless Steel

w w w. p o r t m a n - p o c k e t d o o r s . c o . u k 24

25 45

149

P7501 RU

105 155

Rectangular 155x45mm x 17mm deep flush pull excluding push return plate

108

P7500 OF

155

As above, complete with push return plate

°

P7500 OU

3.5

17

Oval 155x45mm x 17mm deep flush pull excluding push return plate

7 19

2


PORTMAN POCKET DOORS

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au

Bathroom sets Standard sets 15.8

70.0

22.0 12.6

12.

7510 Series (Bathroom sets)

100.0

90.0

∅60.0

160.0

P7510 furniture sets are suitable for door leaves 38–54mm thick and comprise a morticed lock-case complete with hookbolt and strike, flush fitted thumbturn and emergency release. Sets also include a leading edge finger pull which allows the door to be pulled where the installation has the leaf fully recessed into the pocket.

∅25.5

∅48.0

∅29.5 18.0

59.0

Finishes: P7510 SN Satin Nickel P7510 PN Polished Nickel

50.5

P7510 PB Polished Brass

Flush pull sets for glass (suitable for glass 8–12mm thick) 65mm diameter infilled glass pull (requires 49mm diameter hole in glass)

P7950 SS

65mm diameter infilled glass pull (requires 49mm diameter hole in glass)

P7951 SS

64.5

28.0

64.5

25.0

29.0

P7952 SS 46.0

64.5

65mm diameter infilled glass pull (requires 49mm diameter hole in glass)

11.0

P7953 SS

65mm diameter unfilled glass pull (requires 49mm diameter hole in glass)

P7954 SS

64.5

28.0

64.5 46.0

65mm diameter unfilled glass pull (requires 49mm diameter hole in glass)

10.0

Finish: Satin Stainless Steel

w w w. p o r t m a n - p o c k e t d o o r s . c o . u k 25

25.0

∅38.0


PORTMAN POCKET DOORS

iVEGA WOOD

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au

w w w. p o r t m a n - p o c k e t d o o r s . c o . u k 26


PORTMAN POCKET DOORS

iVEGA

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au

PORTMAN Sliding door gear Manufactured in grade 304 stainless steel, iVEGA from Portman is a new range of designer sliding door gear. A simple and elegant aesthetic as well as precision manufacture, result in a high quality look, feel and tactile experience. Roller wheels used with shielded ball-bearings allow the door leaf to glide effortlessly along the track. A concealed floor mounted guide is centrally located to eliminate any swinging effect and allow a uniform movement during sliding. Components can be supplied finished in either satin brushed or mirror polished finishes, when ordering please add SS (for satin) or PS (polished) suffixes to the part numbers on the following pages.

GLASS

w w w. p o r t m a n - p o c k e t d o o r s . c o . u k 27


PORTMAN POCKET DOORS

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au

PORTMAN Sliding door gear WOOD: iVEGA timber door leaves Door Hangers

24

Ø55

98

P7910 Single wheel hanger 150kg c/w stainless steel anti jump pin. Grade 304 stainless steel, shielded ball race bearing. 50 70

25

113

24

4.5

P7911 Double wheel hanger 300kg c/w stainless steel anti jump pin. Grade 304 stainless steel, shielded ball race bearings.

5

115.5

Ø55

50 75

Door Stops/Guides

10 51.5

46

P7921 Double clamped rail mounted end stop to suit timber door hangers.

Ø12

96 Ø20

56

P7923 Rail up-stand stop complete with concealed grub screw rail fixing.

Ø30

T-shaped floor mounted guide. Grade 304 stainless steel.

13.0

P7930

4.0

8.0

19.8

51.0

GLASS:

iVEGA

door leaves

Door Hangers

24

P7912 Single wheel glass door hanger 150kg c/w acrylic anti-jump pin. Grade 304 stainless steel, shielded ball-race bearing.

30

7.5

50

25

210

Ø55

16

Door Stops/Guides

36

61

P7922 Rail mounted end stop.

w w w. p o r t m a n - p o c k e t d o o r s . c o . u k 28

32

Adjustable U-shaped floor mounted guide for glass 8–12mm.

34

21.5

15.5

P7931

44.5


PORTMAN POCKET DOORS

iVEGA

1300 533 500 sales@keelerhardware.com.au www.keelerhardware.com.au

TRACKS and accessories Tracks iVEGA tracks are available in 2, 3 and 4 metre lengths as standard, pre-drilled on one side only, for concealed side mounted fixing. Standard drilling/fixing positions are illustrated below. For non-standard track lengths and drilling placements please contact the sales office.

P7902 (2m)

35.00

2000mm Track, 25.4mm dia. x 2.5mm stainless steel, complete with 5no M8 fixing holes.

482.5

35.0 482.5

482.5

482.5

488.33

488.33

2000.0

P7903 (3m) 3000mm Track, 25.4mm dia. x 2.5mm stainless steel, complete with 7no M8 fixing holes.

P7904 (4m) 4000mm Track, 25.4mm dia. x 2.5mm stainless steel, complete with 9no M8 fixing holes.

488.33

488.33

488.33

491.25

488.33 35.00

35.00

491.25

491.25

491.25

491.25

491.25

491.25

35.00

35.00

Track accessories P7920 25.4mm track end plug.

P7940

Ø20

5 4

Block/brickwork track mount inclusive of internal rail block and fixing sub-plate.

P7942

Ø45 55 Ø42

Track end fixing suitable for 25.4mm dia track.

P7496 85.0

P7999

103.5

36.0

Ceiling mounting bracket.

491.25

Adjustable pig-nose fixing tool (required for glass door clamps only).

Example specification (timber leaf, brushed stainless) Track assembly P7902 SS: 1no 2000mm Rail. 25mm dia. x 2mm thick stainless steel, complete with 5 no M8 fixing holes P7920 SS: 2no 25mm diameter rail end cap P7940 SS: 5no Standard blockwork/plasterboard wall fixing. Complete with internal rail block and sub-plate Hangers P7910 SS: 2no Single wheel, wooden door hanger, 150kg, complete with stainless anti-jump guide Stops & Guides P7921 SS: 2no Double clamp projection rail-end stops to suit timber door hangers P7930 SS: 1no T-shaped timber door bottom guide w w w. p o r t m a n - p o c k e t d o o r s . c o . u k 29


KEELER HARDWARE RT PORTMAN POCKET DOORS