Page 59

6 Quick start-up In the following section it is described step by step what you have to do to administrate the STD32 without long preparation.

6.1 General preparations You need an activated SIM card of a GSM network provider. The PIN of this card has to be set to “0000”(4 times zero). Alternatively you could use the PIN “2468”. To change the PIN you can use a common mobile phone. The instructions how to change the PIN are described in the manual of your mobile phone. If you use a SIM card with a PIN different from “0000” or “2468” in the STD32, the STD32 will use a “wrong” PIN. After the second attempt to power up the device your SIM card will be blocked. In this case you need to use the “Super-PIN” or “PUK” to assign a new PIN to your card. Please look into the user guide of your mobile phone. There you find how to use the PUK to de-block the SIM card. Should you wish to use a SIM card which does not require a PIN, this is also possible and the STD32 recognizes this and will behave accordingly. In the following we will refer to the “master mobile” as the mobile telephone which you want to use to switch the outputs and to configure the STD32 via calls. 59

Telic STD 32 Bedienungsanleitung  

Bedienungsanleitung des Telemetriemodules TELIC STD 32

Advertisement