Page 1

Karmsund Maritime Singapore Pte Ltd KaMOS® Products

KaMSING – time, cost and safety efficient


Karmsund Maritime Singapore Pte Ltd Karmsund Maritime Singapore Pte Ltd is our trade office in Singapore for sale, service and marketing of European Brand names, such as KaMOS® Products and other special products produced by Karmsund Maritime Vietnam Ltd. KaMSING® is focused and based on NS-EN ISO 9001:2015 and NS-EN ISO 14001:2015 for security, work and environment.

Sales office in Singapore.

Standard Gaskets

Other machined parts

KaMOS® RTJ Gasket

KaMOS® Kammprofil Gasket

Materials: •• Soft iron •• SS316 •• SS316L •• SS304 •• SS321 •• UNS NO8904 •• UNS N10276 •• Inconell 625 •• Incoloy 825 •• Duplex F51

•• Duplex 2205 •• Super duplex 2507 •• 6MO F44 (S31254) •• Low carbon steel •• Hasteloy •• Bronze •• Other special materials on request.

Kammprofiles: •• RF •• FF Ring Joints: •• R-oval •• R-octagonal •• RX-gaskets •• BX-gaskets •• Special gaskets

Soft cut materials: •• Graphite •• Vibrationsclamps •• Neoprene/nitrile •• Epdm-rubber •• Viton •• Silikon •• Cgf •• Pfte

Visiting and postal address: 100 Pasir Panjang Road #05-08, Singapore 118518 Tel: +65 6737 3096 • Fax: +65 6737 3097 E-mail: sales@kamsing.no • www.kamsing.no

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


Contents

Karmsund Maritime Offshore Supply AS......................................................................... 3 1 Leakage Testing.................................................................................................................. 7 1.1 Pressure Testing................................................................................................................. 7 1.2 Leakage Testing.................................................................................................................. 7 1.3 Criteria for Flange Integrity................................................................................................ 9 1.4 Seal Areas on Ring Gasket Types..................................................................................... 10 1.5 Ring Gasket Handling and Inspection before Assembly................................................ 11 2 KaMOS® – Leakagetest Method for Pipelines................................................................... 13 2.1 KaMOS® Patented RTJ Gasket – Description of KaMOS® Leaktest Method...................................................................... 15 2.1.1 KaMOS® Leaktest Solutions for RTJ Flanges................................................................... 18 2.2 Technical Information......................................................................................................... 19 2.2.1-7 KaMOS® Patented RTJ Gasket, – Model R........................................................................ 19 2.2.8 KaMOS® Patented RX Gasket............................................................................................. 26 2.2.9 KaMOS® Patented BX Gasket............................................................................................. 27 2.2.10 KaMOS® Gasket – Long Pipe Model.................................................................................. 28 2.2.11 KaMOS® Blind Gasket – with pressure gauge.................................................................. 28 2.2.12 KaMOS® Spectacle Blind Gasket / Plate........................................................................... 28 2.2.13 KaMOS® Special BX Gasket............................................................................................... 28 2.2.14 KaMOS® Skillet..................................................................................................................... 29 2.2.15 KaMOS® Dust Gasket.......................................................................................................... 29 2.2.16 KaMOS® Patented TestSealRing........................................................................................ 29 2.3 KaMOS® Patentented Intelligent Kammprofil Gasket...................................................... 31 2.3.1 KaMOS® Leaktest Solutions for Kammprofil Gaskets..................................................... 32 2.4 Technical Info – RF & FF Kammprofil Gasket.................................................................. 33 2.4.1 KaMOS® Kammprofil Gasket – Style RU........................................................................... 33 2.4.2 KaMOS® Kammprofil Gasket – Style RS........................................................................... 34 2.4.3 KaMOS® Kammprofil Gasket – Style FU........................................................................... 35 2.4.4 KaMOS® Kammprofil Gasket – Style FS............................................................................ 36 2.4.5 KaMOS® Graphite for Reusable KaMOS® Kammprofil Gasket........................................ 37 2.5 KaMOS® Test Equipment.................................................................................................... 38 2.5.1 KaMOS® Nitrogen Test Equipment, Type 200500............................................................. 38 2.5.2 KaMOS® Hydraulic Test Equipments................................................................................. 39 2.5.3 KaMOS® Test Plug / Indicator / Blind Plug Cap................................................................ 42 2.5.4 KaMOS® Pipe Support / Vibration Set............................................................................... 43 2.5.5 KaMOS® Hose Reel, Type 200700...................................................................................... 45 2.5.6 KaMOS® Test Hose for KaMOS® Test Equipment............................................................. 45 2.5.7 KaMOS® Unit for Pressure Reading / Recording............................................................. 46 2.5.8 KaMOS® Test / Refill Connectors....................................................................................... 46 2.6 KaMOS® Flanges and Caps................................................................................................ 47 2.6.1 KaMOS® Flange.................................................................................................................... 47 2.6.2 KaMOS® Distance Caps...................................................................................................... 47 2.6.3 KaMOS® Flange Caps.......................................................................................................... 47 2.7 KaMOS® Gasket Installation Tool....................................................................................... 47

Specifications and images are subject to change without notice. Karmsund Maritime Group as is not responsible for typgraphical errors. 2014 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply as. All rights reserved.


3 KaMOS® Tools...................................................................................................................... 49 3.1 KaMOS® Patented Portable Valve Actuator...................................................................... 49 3.1.1 KaMOS® Patented Portable Valve Actuator, Type 101000............................................... 50 3.1.2 KaMOS® Patented Drive Plate for KaMOS® Patented Portable Valve Actuator, Type 101000 ........................................................................................................................ 50 3.1.3 KaMOS® Patented Portable Valve Actuator, Type 102000............................................... 51 3.1.4 KaMOS® Patented Drive Plate for KaMOS® Patented Portable Valve Actuator, Type 102000......................................................................................................................... 51 3.1.5 Security Locker, Type 101121 for KaMOS® Patented Drive Plates................................. 52 3.1.6 Security Chain, Type 101010 for KaMOS® Patented Portable Actuators....................... 52 3.2 Extra Equipment for KaMOS® Patented Portable Valve Actuater.................................. 53 3.2.1 KaMOS® Speed Multiplier for KaMOS® Patented Portable Valve Actuator, Type 101000......................................................................................................................... 53 3.2.2 KaMOS® Torque Multiplier for KaMOS® Patented Portable Valve Actuator, Type 101000. 53 3.2.3 KaMOS® Adapter for Spindle Valves................................................................................. 54 3.2.4 KaMOS® Strengthener for KaMOS® Anglehead................................................................ 55 3.2.5 KaMOS® Valve Wheel, Type 105100.................................................................................. 55 3.2.6 KaMOS® Adapter Valve Drive Spline................................................................................. 55 3.2.7 IR Angleheads..................................................................................................................... 56 3.2.8 Adapters and Couplings for KaMOS® Equipment........................................................... 56 3.2.9 KaMOS® Wrench with IR Anglehead................................................................................. 57 3.2.10 Maintenance Kit for Air Engine......................................................................................... 57 3.2.11 KaMOS® Mounting Bracket................................................................................................ 58 3.2.12 KaMOS® Hand Sequrity for Gashandle............................................................................. 58 3.3 KaMOS® Protector Remover.............................................................................................. 59 3.3.1 KaMOS® Protector Remover Type 104000........................................................................ 59 3.3.2 KaMOS® Grip Plate.............................................................................................................. 59 3.4 KaMOS® Storage Products................................................................................................. 60 3.4.1 KaMOS® Storage Box, Type 103000.................................................................................. 60 3.4.2 KaMOS® Trolley for Storage Box, Type 103005............................................................... 61 3.4.3 KaMOS® Actuator Trolley LB Type 103006....................................................................... 61 3.4.4 KaMOS® Protection Box, Type 103200.............................................................................. 62 3.4.5 KaMOS® Air Hose Reel Type 103008................................................................................. 62 4 Conversion Tables and Factors........................................................................................ 65 4.1 Various Conversion Factors.............................................................................................. 65 4.2 Corrosion Resistant Chart................................................................................................. 66 4.3 Conversion Table................................................................................................................ 68 4.4 Hardness Conversion Table............................................................................................... 69 4.5 Steel Conversions............................................................................................................... 70 4.6 Technical Information RTJ Gasket – Model R.................................................................. 73 5 Karmsund Company References...................................................................................... 77 6 Company Profiles............................................................................................................... 81 7 Karmsund Maritime Group AS Contact details................................................................ 83 Notes.................................................................................................................................... 84

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.

5


Ring Joint is the designation for a type of seal where an oval or octagonal ring constitutes the seal element that will prevent leakage out between two flanges. – Karmsund Maritime Group

Specifications and images are subject to change without notice. Karmsund Maritime Group as is not responsible for typgraphical errors. 2014 - 1 // KaMOSÂŽ PRODUCTS - Karmsund Maritime Offshore Supply as. All rights reserved.


Leakage testing

1

1.1 Pressure Testing In case of changes or modifications made in the piping systems the systems must be pressure tested. This must be done, says the ANSI code, by blanking off a limited section of piping and pressure testing it with a given over-pressure above the design pressure. The test is usually done with water (hydrostatic) as the test medium.

intact. Pipe lengths (spools) are usually tested one at a time.

The aim of the pressure test is to verify that all welds and flanges are strong enough to withstand the strain they will suffer and also check that the system is

Leaks in flanges therefore cause an unnecessary prolongation of the pressure test period, which can be avoided by checking flange integrity before testing.

After the pressure test is done the pipe spools are installed on the process system and leak tests commence. In case of leaks, they must be repaired and another system pressure test must be made.

1.2 Leakage Testing If only individual components are replaced, they have been pressure tested by the manufacturer. Further pressure testing is not needed. However the system should be leak tested for leaks in the flanges. According to the specification this is done either with gas or water. The blanking off of the area to be leak tested can be done with shutoff valves, or blinds, if there are no valves suitably placed in the system. But where blind flanges are used, there will inevitably be at least two flanges that have not been leak tested. In practice, when replacing a valve, the leak test will often be bypassed, and instead the system pressure will be applied gradually at the same time as the flanges that were split are monitored. If a leak is discovered, the system is depressurized again and the leak repaired, so that the procedure can be repeated.

7 In many cases, this is a time consuming process that can result in production downtime and economic loss due to reduced production. Safety is enhanced and economic loss is reduced with minimized downtime if there can be some level of certainty of the tightness of the flange. The main difference between a ring joint and a tradition flat seal is that the ring joint sits in a prefabricated groove in the flange which is suited to the oval or octagonal geometry of the ring. A flat seal will face against two flat surfaces. The seal ring is always made of metal, whereas flat seals are usually made of an elastomeric material. Seal rings are used extensively in process systems on production platforms and are universal in the wellhead area.

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOSÂŽ PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


The pressure classes and geometries of the flanges and rings used are given in the standards API 6A and ANSI 16.5 A principal outline of a flange with seal ring joint is given in Figure 1. Standard API 6A describes two types of flanges for pipe connections where ring joints are used, flange type B and flange type BX. In ANSI 16.5 all flanges are more or less similar to the API B type. For a flange of type API BX there is virtually no gap between the flanges when correctly made up together. For flange type API B and ANSI 16.5, there will be a gap between the flanges which is virtually constant for pipeline dimensions between 2 and 23 inches (see Table 1).

8

The gap between the flanges varies with the type of ring used. For ANSI 16.5 flanges the gap between the flanges will be of the same approximate size as for API flanges type B. ANSI flanges on the other hand have a reduction of the flange that makes access to the ring easier. The seal rings used in this type of flange are divided into three main groups: R, RX and BX. Ring type R is found in both octagonal and oval versions. Both the octagonal and the oval ring can be used in the same flange with identical shaping of the groove. Ring types R and RX can therefore be used interchangeably in

Pipe diameter (inches)

API 6B flanges and ANSI 16.5, but ring type BX can only be used with API flange type 6BX. Both ring types RX and BX have penetrating holes for pressure equalization between the flange voids (annular space), but the rings cannot be exchanged. Table 1 is a summary of the typical flange gap for API type B flanges, and ANSI 16.5 flanges, when correctly tightened. As the table shows, the flange gap is essentially constant for a ring type regardless of the size of the ring. The largest difference is between ring types R and RX. The flange gap varies also with the pressure class of the flange. Flanges of type API 6A BX have no gap between the flanges after tightening and are therefore omitted from the table. KaMOSÂŽ BX Gaskets are modified to be 5 mm higher than a standard BX gasket. Standard Ring Joint

Approx. flange gap at seal ring (mm) API 6A R ring

API 6A RX ring

ANSI 16.5 R ring

2

5

12

4

4

5

12

4-6

6

5

12

4-6

8

4

12

4-6

10

4

12

4-6

16

5

12

4-6

20

5

15

5-10

24

-

-

6-11

Figure 1

Table 1: Flange gap for different piping diameters

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOSÂŽ PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


1.3 Criteria for Flange Integrity Seal rings of type R and RX have a height-to-width ratio of 1.3 or greater, and the groove that the seal ring sits in is conical. The width of the groove at the bottom is less than the width of the ring. When the flanges are compressed by bolts the ring will be compressed and pushed into the bottom of the groove forming a metallic contact between the side walls of the ring and the groove of the flange. This is a condition for achieving tightness of the seal. Thus there are two sealing faces in the seal, a primary side towards the process, and a secondary side towards the atmosphere. Ideally both the primary and secondary sides will be tight. This requires good metallic contact between the flange and seal ring. Correct pre-tension of the flanges in relation to the inside and outside forces is therefore critical for the seal performance of the ring. In addition both ring and groove must be free of damage or mechanical injury, and must meet specific requirements for surface roughness. In the great majority of cases flanges are tensioned so that local creep (“flow” of metal) occurs in the contact zone between the ring and flange groove. This is necessary to achieve desired material contact between the surfaces. The rest of the ring, together with bolts and flange, will form an elastic system that should be able to compensate for deformations caused by swings in external and internal forces resulting from temperature changes, process variations and physical loads (like weight of medium in pipe). To achieve satisfactory tightness the following criterias must be satisfied or accommodated:

1. Geometry in the seal ring and the groove in which

it sits must be adjusted so that material contact is achieved around the entire circumference, both on the primary and secondary sides of the ring. Neither the seal ring nor the groove must contain damage or scratches that can form leak paths past the ring.

2. The groove in the flange must be worked up to a

coarseness better than 63 RMS and also meet the geometry and tolerance as given in ANSI 16.5 and API 6A.

3. The bolt pre-tension must be sufficient to deform the seal ring plastically on the surface so that good material contact is achieved between seal and flange. On the other hand the ring must act elastically after pre-tension so as to take up movements in the flange. This means that the pre-tension is released after first being applied.

4. Torquing of the bolts must be done so that the

surface pressure is the same around the whole ring, without occasioning skew angles between the flanges. The maximum permitted non-alignment under API 6A is one degree. Also, the flange must be tensioned so that the gap between flanges meets the goals given in the standards (see typical flange gaps in Table 1, page 5). Due to the deformation that occurs in the seal ring, each bolt, under today’s procedure, must be tensioned in three or four steps, if the desired resulting pre-tension is to be achieved.

A difficulty with flanges in the ANSI 16.5 code is that the necessary pre-tension of the flanges is not specified. This means that practices for torquing flanges differ. The current practice is that bolts are pre-tensioned to 40-50 per cent of yield point strain of the bolts. This pre-tension is adjusted to the strength of the flange. Yet a given torquing moment does not result in a specific pre-tension, since there are major sources of error in the estimated thread friction and nut-flange friction. The sources of error here are so large that the margin of error may reach ± 30 percent. Pressure classes for ANSI 16.5 and API 6A flanges The ANSI 16.5 flanges are divided into pressure classes: 150 (8.0), 300 (20.5), 400 (27.5), 600 (41.5), 900 (62.0), 1500 (103.0), and 2500 (172.0). The codes refer to the design pressure in psi, with the corresponding pressure in bar in brackets. Corresponding codes for API 6A cover the pressure range from 2000 psi to 20,000 psi and the hydrostatic test pressure for the same flanges is 2.7 to 3.7 times the design pressure.

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.

9


1.4 Seal Areas on Ring Gasket Types

Type R oval ring gasket

Type R octagonal ring gasket

Type RX ring gasket

Type BX ring gasket

Type SRX ring gasket for subsea make-up Option A

Type SBX ring gasket for subsea make-up Option A

The arrows indicate the sealing areas of the different types of ring gaskets. In the case of subsea make up, any water trapped between a ring groove bottom and the sealing area of a SRX or SBX gasket can escape to the equipment i.d. bore.

10

Type SRX ring gasket for subsea make-up Option B

Type SBX ring gasket for subsea make-up Option B

Making up ring joint connections of any kind represents considerable effort and uses valuable time, having a connection leak after make-up represents an unnecessary and avoidable downtime

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOSÂŽ PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


1.5 Ring Gasket Handling and Inspection before Assembly API requires that manufacturers box or wrap ring gaskets, but this provides no real assurance that they will arrive at the point of use undamaged. All ring gaskets finally seal by coining and intimate contact mandating that the seal contact area not have damage that will prevent continuous intimate contact after make-up and coining. Any bruise, gouge, (dent, ding, etc.) or groove across the seal contact area may prevent uniform coining and continuous intimate contact, resulting in leakage in the area of damage. Any rough handling or impact contact against hard surfaces or objects may cause damage to a ring gasket that renders it unusable. Keep soft iron and carbon steel ring gaskets dry to prevent rust and pitting. Note: The plating on these ring gaskets will provide some rust protection for a short time but any extended storage in a damp atmosphere or wetness may destroy the usefulness of these gaskets. Stainless steel ring gaskets forgive wet conditions.

Keep all ring gaskets in a secure area where other objects do not contact or bang against them. Transport and handle them using care not to crush, bruise, or scar them in any way. Before installing any ring gasket (and preferably before transporting to the installation site) inspect it carefully. Make certain the ring gasket stamped marking agrees exactly with that called for as fitting the intended connection. Be sure no damage exists on, or across, the seal contact surfaces; See table 2 below. Note: Ring gaskets marked SRX or SBX have identical measurements to RX and BX ring gaskets with the same number designation, and they will fit the same corresponding connectors. The “S” indicates these gaskets have vent holes to allow reliable connector make-up underwater (subsea). API Spec 17D requires that manufacturers use only corrosion resistant alloy as the material for these gaskets.

RING GASKET MARKING ALL MARKING COLD STAMPED ON O.D. DATE OF MANUFACTURE1 MANUFACTURERS NAME OR LOGO RING GASKET TYPE AND NUMBER2 MATERIAL: Soft iron Low-carbon steel 304 Stainless steel 316 Stainless steel

MARK: D-4 S-4 S-304-4 S-316-4

Other materials on request. 1 2

Manufacturer may use a code number to indicate date of manufacture. No distinctive marking required on R ring gaskets to differentiate. Oval or Octagonal.

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.

11


Making up ring joint connections of any kind represents considerable effort and uses valuable time, having a connection leak after make-up represents an unnecessary and avoidable downtime. – Karmsund Maritime Group


2

KaMOS® – Leakagetest Method for Pipelines

Over the past few years there have been several cases of near-accidents due to leaks in flanges. Experience from offshore operation has shown that flanged connections in piping at high pressure in the presence of hydrocarbons constitute a large safety risk. Better methods of avoiding leaks from such flanges will provides a safety benefit, at the same time more effective methods of leak testing can reduce the down-time connected with testing, and thus reduce the loss in earnings as the result of downtime production. KaMOS® method of leak testing of flanges with ring joints measuring whether tightness has been achieved on all sealing surfaces of flange before the flange and pipe are subjected to internal pressure, as well as monitor the flange connections for future leakages.

The KaMOS® test method is based on pressurizing the annular space above and below the seal ring using test gas. If no pressure loss is recorded during this pressurization, the seal is deemed tight. The test medium that is applied to the annular space is applied by using KaMOS® Test Equipment (containing a reservoir, a manometer and hoses), a simple portable test equipment. KaMOS® Test Equipment is easy to handle and will make it possible to leaktest flanges on a one-off basis without pressurizing entire systems. The KaMOS® test system will also check the primary and secondary sides of the seal for tightness. Other leak testing methods that is used today cannot distinguish these two sides, only if it is tight or not.

13

The KaMOS® method permits flange integrity to be tested from the outside before system pressure is applied. In the safety equation this will offer great benefits. It will also in many cases reduce the test time for normal pressure and leak tests because certain repetitions of the tests in case of leaky flanges will be avoided.

KaMOS® Patented Ring Joint - equipment for sealing and surveillance of flanged connections

TYPE APPROVAL CERTIFICATE

Certificate No: TAP0000078

This is to certify: That the KaMOS® RTJ gaskets with type designation(s) Models R, RX and BX Issued to

Karmsund Maritime Offshore Supply AS KOPERVIK, Norway

is found to comply with DNVGL-OS-D101 – Marine and machinery systems and equipment, Edition July 2015 DNV GL rules for classification – Ships Pt.4 Ch.6 Piping systems DNVGL-OS-E201 – Oil and gas processing systems, Edition July 2015

Application : Metallic gasket with test and leak indicator, approved for use with ASME B16.5 bolted flanges. Product(s) approved by this certificate is/are accepted for installation on all vessels classed by DNV GL. Temperature range: Max. working press.: Design: Sizes:

Max 275 deg C 200 bar Metallic gasket ½” - 52”

This Certificate is valid until 2020-12-31. Issued at Høvik on 2015-12-18 DNV GL local station: Haugesund Approval Engineer: Pierre-Eric Moulia

for DNV GL Digitally Signed By: Hals, Inger-Helene Location: DNV GL Høvik, Norway Signing Date: 2015-12-18

Inger-Helene Hals Head of Section

This Certificate is subject to terms and conditions overleaf. Any significant change in design or construction may render this Certificate invalid. The validity date relates to the Type Approval Certificate and not to the approval of equipment/systems installed.

Form code: TA 1411a Revision: 2015-05 © DNV GL 2014. DNV GL and the Horizon Graphic are trademarks of DNV GL AS.

www.dnvgl.com

Page 1 of 2

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


14

Statoil Kårstø Test Project 1997.

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


2.1 KaMOS® Patented RTJ Gasket – Description of KaMOS® Leaktest Method By using a unique patented technique KaMOS® has developed a sealing arrangement for pipe systems which incorporates surveillance of flange conventions for all sizes. The method will be able to provide a quick and effective control as to whether the flange connection is intact before the flange receives system pressure. This will offer large safety benefits. The risk of leaks after maintenance actions will be reduced. Experience shows this to have been a safety problem. It will also offer major economic savings since the leaktest method is significantly faster than traditional leak testing. Production can recommence faster after a main­tenance action. Also, there will be a decrease

in the volumes of nitrogen/helium used since the test equipment requires only tiny amounts of gas. The principal applied in the leak test is based on pressurizing the annual space above and below the seal ring. If no pressure loss is experienced in this pressurization, the seal is deemed tight. (The test pressure is applied to the annular space by drilling a hole through the flange into one of the annular spaces. Pressure can be equilibrated between the annular spaces by drilling a hole through the seal ring from the upper to the lower annual space.)

Advantages by Using KaMOS® Patented RTJ Gasket: ••The flange is tested for leaks before the process pressure is applied

••Flanges that would not otherwise be leak or

pressure tested (such as blind flanges to isolate spools) can be tested

••Certainty that the seal actually seals all contact surfaces (primary and secondary sides)

••Time of testing is significantly reduced, resulting in significantly less downtime due to leak testing

••KaMOS® Test Equipment is simple and easy to use ••Necessary volumes of nitrogen required for testing are minimal, which means that large quantities of test medium will be saved compared with conventional leak testing

••The method can also be used for continuous

monitoring of seals by equipping the annular space with an indicator of gas pressure

••The pressurization line can be used to feed in liquid sealant in case of emergency

••Future surveillance for leakages of flanged connections

••The test will offer a safety benefit and an economic benefit because at an early stage it will detect flange connections which are basically leaky

••The KaMOS® method is DNV approved and is

reported to have compared favour with conventional methods in test program run at the Statoil F&U laboratory and has over the past year been adapted for a number of projects by Total, Cameron, Norsk Hydro, Statoil and Shell UK

The modification needing to be done, involving drilling a hole in the sealing ring, are considered to have no practical consequences for the strength or deformation characteristics of the ring. Application of the test medium, which must be introduced into the annular space, is envisaged using a easy portable KaMOS® Test Equipment, consisting of a reservoir, valves, hoses, and manometers. The KaMOS® Test Equipment makes it possible to test single flanges without pressurizing the entire piping system. The KaMOS® method also has another advantage since it checks that all sealing faces in the seal are tight. The traditional leak test method only serves to confirm that seal surfaces are tight on the inside or outside. Leakage or “blow-outs” with serious consequences may be prevented

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.

15


KaMOS® Patented Ring Joint

Ringroom

16

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


KaMOS® Gaskets Used AT SITE

Tested by KaMOS® Nitrogen Test Equipment

SELECTED REFERENCES: •• ExxonMobil/Hyundai Heavy Industries Ltd., FPSO Kizomba A & B and Wellhead Platform, Angola •• Total E&P Angola, ROSA Project, Angola •• Petrobras, FPSO V Espadarte, Brazil •• Total E&P Borneo, Onshore Processing Plant Lumut, Brunei •• Husky Oil Operations Limited, White Rose Project, Canada •• ConocoPhillips, Platforms, UK, Norway •• AMEC Paragon, Kizomba A and B Satelites, Angola •• BP, Platforms, UK •• Shell, Platforms, UK •• Construction and Piling equip. Ltd. Pte., Angel Project, Australia •• PTTEP- Thailand, Bangkot Field, Thailand •• Hyundai Heavy Industries Co Ltd., Umm Shaif Prosject, UAE •• BG Tunisia, Hasurbal Project, Tunisia •• Total E&P UK, Platforms, UK

SUBSEA

Tested by KaMOS® Hydraulic Test Equipment

SELECTED REFERENCES: •• Saipem, Blacktip Gas (ENI Australia), Australia •• Woodside Energy Ltd, Angel Project, Australia •• Burullus Gas Company (Technip France) Simian, Sienna and Sapphire Development Slug catcher modification West Delta Deep Marine Concession, Scarab •• PT. Mitra PFP Utama, Tangguh GPF Project, Indonesia •• PT. Techip Indonesia, BBSD Project, Indonesia •• Rubicon Offshore, FPSO Rubicon, Batangas, Philippines •• Technip Offshore UK Ltd Baobab Field Development Project, UK Simian/Sienna and Sapphire Development, Egypt •• Technip Subsea 7 Asia Pacific Pty Ltd •• Tavan Gashta Int (TGI) •• Leigthon Contractors PVT Ltd, India •• Kaliraia Sari P.T, Chevron Indonesia Well Connection •• PT Petrosea TBK, Indonesia Kersi Field Dev Project KRA South Gas Development •• SES Gas Project, Sumatra, Malaysia •• Global Offshore Malaysia, T&G Offshore Facility Guntong •• Chevron, Erskine, UK •• Technip UK, Erskine, UK •• CAPE Group Ltd. Su Tu Den North East, Vietnam Su Tu Field development, Vietnam

UNDERGROUND

SELECTED REFERENCES: •• Total E&P Myanmar, DGMS. Upgrading Project, Myanmar

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.

17


2.1.1 KaMOS® Leaktest Solutions for RTJ Flanges

KaMOS® leakagetest is also available to be used with KaMOS® patented flanges, following solutions are offered:

R & RX ring standard

R & RX ring KaMOS® standard (Indicator/test connection in ring)

R & RX ring KaMOS® standard (Indicator/test connection fitted to the flange)

R & RX ring KaMOS® standard

BX ring standard

BX ring KaMOS® standard (Indicator/test connection in ring)

R & RX ring KaMOS® standard (Indicators/test connection in flange)

18

(Indicator/test connection horizontal fitted to the flange)

R & RX ring KaMOS® standard

(Indicators/test connection horizontal fitted to the flange)

Types R and RX gaskets shall be used on 6B flanges. Only BX gaskets shall be used with 6BX flanges. RX and BX gaskets provide a pressure-energized seal but are not interchangeable.

BX ring KaMOS® standard

(Indicator/test connection horizontale fitted to the flange)

BX ring KaMOS® standard (Indicator/test connection fitted to the flange)

Patented

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


2.2 Technical Information 2.2.1 KaMOS® Patented RTJ Gasket, – Model R ØDM

ANSI B 16.5 – MSS SP44 – API Std. (*) Nominal Pressure 150 # (PN 20)

b

B/H

Centerline

C

C - will flush if possible A

Nominal sizes ANSI

ISO

Pitch diameter of ring

Height of ring Width of ring

Oval

Octagonal

Approx distance between made up flanges

Approx weight

KAMOS® Oval

KAMOS® Octagonal

(inches)

Ring and grove no.

DN

Dm (mm)

A (mm)

B (mm)

H (mm)

b (mm)

(kg)

(kg)

1

15

25

47,63

7,95

14,22

12,70

4,00

0,22

0,12

1 1/4

17

-

57,15

7,95

14,22

12,70

4,00

0,16

0,23

1 1/2

19

40

65,10

7,95

14,22

12,70

4,00

0,26

0,18

2

22

50

82,55

7,95

14,22

12,70

4,00

0,30

0,21

2 1/2

25

65

101,60

7,95

14,22

12,70

4,00

0,35

0,42

3

29

80

114,30

7,95

14,22

12,70

4,00

0,30

0,41

3 1/2

33

-

131,78

7,95

14,22

12,70

4,00

0,43

0,40

4

36

100

149,23

7,95

14,22

12,70

4,00

0,34

0,35

5

40

125

171,45

7,95

14,22

12,70

4,00

0,52

0,74

6

43

150

193,68

7,95

14,22

12,70

4,00

1,00

0,50

8

48

200

247,65

7,95

14,22

12,70

4,00

0,71

0,60

10

52

250

304,80

7,95

14,22

12,70

4,00

0,85

0,80

12

56

300

381,00

7,95

14,22

12,70

4,00

1,04

1,10

14

59

350

396,88

7,95

14,22

12,70

3,20

1,10

1,30

16

64

400

454,03

7,95

14,22

12,70

3,20

1,22

1,32

18

68

450

517,53

7,95

14,22

12,70

3,20

1,38

1,28 1,35

20

72

500

558,80

7,95

14,22

12,70

3,20

1,48

22

80

550

615,95

7,95

-

12,70

3,20

1,62

1,69

24

76

600

673,10

7,95

14,22

12,70

3,20

1,76

1,63

Patented

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.

19


2.2.2 KaMOS® Patented RTJ Gasket, – Model R ØDM

ANSI B 16.5 – MSS SP44 – API Std. (*) Nominal Pressure 300 # (PN 50)

b

B/H

Centerline

C

C - will flush if possible A

ISO

Pitch diameter of ring

Width of ring

Oval

Octagonal

Approx distance between made up flanges

Nominal sizes

ANSI

20

Height of ring

Approx weight KaMOS® Oval

KaMOS® Octagonal

(Inches)

Ring and grove no.

DN

Dm (mm)

A (mm)

B (mm)

H (mm)

b (mm)

(kg)

(kg)

1/2

11

15

34,14

6,35

11,18

9,65

3,20

0,06

0,06

3/4

13

20

42,88

7,95

14,22

12,70

4,00

0,10

0,10

1

16

25

50,80

7,95

14,22

12,70

4,00

0,14

0,14

1 1/4

18

-

60,33

7,95

14,22

12,70

4,00

0,16

0,16

1 1/2

20*

40

68,28

7,95

14,22

12,70

4,00

0,18

0,18

2

23*

50

82,55

11,13

17,53

16,00

5,56

0,36

0,36

2 1/2

26*

65

101,60

11,13

17,53

16,00

5,56

0,44

0,44

3

31*

80

123,83

11,13

17,53

16,00

5,56

0,54

0,54

3 1/2

34

-

131,78

11,13

17,53

16,00

5,56

0,64

0,54

4

37*

100

149,23

11,13

17,53

16,00

5,56

0,64

0,64

5

41*

125

181,98

11,13

17,53

16,00

5,56

0,81

0,82

6

45*

150

211,15

11,13

17,53

16,00

5,56

0,92

0,88

8

49*

200

269,88

11,13

17,53

16,00

5,56

1,16

1,14

10

53*

250

323,85

11,13

17,53

16,00

5,56

1,40

1,36

12

57*

300

381,00

11,13

17,53

16,00

5,56

1,62

1,58

14

61

350

419,10

11,13

17,53

16,00

5,56

1,78

1,76

16

65*

400

469,90

11,13

17,53

16,00

5,56

2,02

1,98

18

69*

450

533,40

11,13

17,53

16,00

5,56

2,40

2,26

20

73*

500

584,20

12,70

19,05

17,53

5,56

3,08

2,98

22

81

550

635,00

14,30

-

19,05

-

4,10

4,10

24

77

600

692,15

15,88

22,35

20,57

6,35

5,10

5,04

26

93

650

749,30

19,05

-

23,88

-

7,27

8,00

28

94

700

800,10

19,05

-

23,90

-

8,06

8,10

30

95

750

857,25

19,05

-

23,88

-

9,40

8,72

32

96

800

914,40

22,23

-

26,92

-

-

10,70

34

97

850

965,20

22,23

-

26,92

-

-

12,86

36

98

900

1022,35

22,23

-

26,92

-

16,80

16,10

* For other sizes on request. Patented

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


2.2.3 KaMOS® Patented RTJ Gasket, – Model R ØDM

ANSI B 16.5 – MSS SP44 – API Std. (*) Nominal Pressure 400 #

b

B/H

Centerline

C

C - will flush if possible A

ANSI (Inches)

Ring and grove no.

1/2

11

Approx weight

ISO

Pitch diameter of ring

Width of ring

Oval

Octagonal

Approx distance between made up flanges

DN

Dm (mm)

A (mm)

B (mm)

H (mm)

b (mm)

(kg)

(kg)

15

34,14

6,35

11,18

9,65

3,20

0,06

0,06

Nominal sizes

Height of ring

KaMOS® Oval

KaMOS® Octagonal

3/4

13

20

42,88

7,95

14,22

12,70

4,00

0,10

0,10

1

16

25

50,80

7,95

14,22

12,70

4,00

0,14

0,14

1 1/4

18

-

60,33

7,95

14,22

12,70

4,00

0,16

0,16

1 1/2

20*

40

68,28

7,95

14,22

12,70

4,00

0,18

0,18

2

23*

50

82,55

11,13

17,53

16,00

5,56

0,36

0,36

2 1/2

26*

65

101,60

11,13

17,53

16,00

5,56

0,44

0,44

3

31*

80

123,83

11,13

17,53

16,00

5,56

0,54

0,54

4 1/2

34

-

131,78

11,13

17,53

16,00

5,56

0,64

0,54

4

37*

100

149,23

11,13

17,53

16,00

5,56

0,64

0,64

5

41*

125

180,98

11,13

17,53

16,00

5,56

0,81

0,82

6

45*

150

211,15

11,13

17,53

16,00

5,56

0,92

0,88

8

49*

200

269,88

11,13

17,53

16,00

5,56

1,16

1,14

10

53*

250

323,85

11,13

17,53

16,00

5,56

1,40

1,36

12

57*

300

381,00

11,13

17,53

16,00

5,56

1,62

1,58

14

61

350

419,10

11,13

17,53

16,00

5,56

1,78

1,76

16

65*

400

469,90

11,13

17,53

16,00

5,56

2,02

1,98

18

69*

450

533,40

11,13

17,53

16,00

5,56

2,40

2,26

20

73*

500

584,20

12,70

19,05

17,53

5,56

3,08

2,98

22

81

550

635,00

14,30

-

19,05

-

4,10

4,10

24

77

600

692,15

15,88

22,35

20,57

6,35

5,10

5,04

26

93

650

749,30

19,05

-

23,88

-

7,27

8,00

28

94

700

800,10

19,05

-

23,90

-

8,06

8,00

30

95

750

857,25

19,05

-

23,88

-

9,40

8,72

32

96

800

914,40

22,23

-

26,92

-

-

10,70

34

97

850

965,20

22,23

-

26,92

-

-

12,86

36

98

900

1022,35

22,23

-

26,92

-

16,80

16,10

* For other sizes on request. Patented

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.

21


2.2.4 KaMOS® Patented RTJ Gasket, – Model R ØDM

C

b

B/H

Centerline

ANSI B 16.5 – MSS SP44 – API Std. (*) Nominal Pressure 600 # (PN 100)

C - will flush if possible

A

Nominal sizes

ANSI (Inches)

22

Ring and grove no.

Height of ring

ISO

Pitch diameter of ring

Width of ring

Oval

DN

Dm (mm)

A (mm)

B (mm)

Octagonal

Approx distance between made up flanges

Approx weight KaMOS® Oval

KaMOS® Octagonal

H (mm)

b (mm)

(kg)

(kg)

1/2

11

15

34,14

6,35

11,18

9,65

3,20

0,06

0,06

3/4

13

20

42,88

7,95

14,22

12,70

4,00

0,10

0,10

1

16

25

50,80

7,95

14,22

12,70

4,00

0,14

0,14

1 1/4

18

-

60,33

7,95

14,22

12,70

4,00

0,16

0,16

1 1/2

20*

40

68,28

7,95

14,22

12,70

4,00

0,18

0,18

2

23*

50

82,55

11,13

17,53

16,00

5,56

0,36

0,36

2 1/2

26*

65

101,60

11,13

17,53

16,00

5,56

0,44

0,44

3

31*

80

123,83

11,13

17,53

16,00

5,56

0,54

0,54

3 1/2

34

-

131,78

11,13

17,53

16,00

5,56

0,64

0,54

4

37*

100

149,23

11,13

17,53

16,00

5,56

0,64

0,64

5

41*

125

180,98

11,13

17,53

16,00

5,56

0,81

0,82

6

45*

150

211,15

11,13

17,53

16,00

5,56

0,92

0,88

8

49*

200

269,88

11,13

17,53

16,00

5,56

1,16

1,14

10

53*

250

323,85

11,13

17,53

16,00

5,56

1,40

1,36

12

57*

300

381,00

11,13

17,53

16,00

5,56

1,62

1,58

14

61

350

419,10

11,13

17,53

16,00

5,56

1,78

1,76

16

65*

400

469,90

11,13

17,53

16,00

5,56

2,02

1,98

18

69*

450

533,40

11,13

17,53

16,00

5,56

2,40

2,26

20

73*

500

584,20

12,70

19,05

17,53

5,56

3,08

2,98

22

81

550

635,00

14,30

-

19,05

-

4,10

4,10

24

77

600

692,15

15,88

22,35

20,57

6,35

5,10

5,04

26

93

650

749,30

19,05

-

23,88

-

7,27

8,00

28

94

700

800,10

19,05

-

23,90

-

8,06

8,10

30

95

750

857,25

19,05

-

23,88

-

9,40

8,72

32

96

800

914,40

22,23

-

26,92

-

-

10,70

34

97

850

965,20

22,23

-

26,92

-

-

12,86

36

98

900

1022,35

22,23

-

26,92

-

16,80

16,10

* For other sizes on request. Patented

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


2.2.5 KaMOS® Patented RTJ Gasket, – Model R ØDM

C

* 1/2" - 2 1/2" see Nominal Pressure 1500#

(Inches)

Ring and grove no.

C - will flush if possible

A

Nominal sizes

ANSI

b

B/H

Centerline

ANSI B 16.5 – MSS SP44 – API Std. (*) Nominal Pressure 900 # (PN 150)

Height of ring

ISO

Pitch diameter of ring

Width of ring

Oval

DN

Dm (mm)

A (mm)

B (mm)

Octagonal

Approx distance between made up flanges

Approx weight KaMOS® Oval

KaMOS® Octagonal

H (mm)

b (mm)

(kg)

(kg)

3

31*

80

123,83

11,13

17,53

16,00

4,00

0,52

0,52

4

37*

100

149,23

11,13

17,53

16,00

4,00

0,64

0,58

5

41*

125

181,98

11,13

17,53

16,00

4,00

0,81

0,82

6

45*

150

211,15

11,13

17,53

16,00

4,00

0,92

0,88

8

49*

200

269,88

11,13

17,53

16,00

4,00

1,18

1,12

10

53*

250

323,85

11,13

17,53

16,00

4,00

1,40

1,34

12

57*

300

381,00

11,13

17,53

16,00

4,00

1,66

1,58

14

62

350

419,10

15,88

22,35

20,57

4,00

3,18

3,08

16

66*

400

469,90

15,88

22,35

20,57

4,00

3,64

3,44

18

70*

450

533,40

19,05

25,40

23,90

4,76

5,54

5,36

20

74*

500

584,20

19,05

25,40

23,90

4,76

5,98

5,86

24

78

600

692,15

25,40

33,27

31,75

5,56

11,68

12,40

26

100

650

749,30

28,58

-

34,90

-

17,50

17,30

28

101

700

800,10

31,75

-

38,10

-

20,40

20,00

30

102

750

857,25

31,75

-

38,10

-

23,90

23,62

32

103

800

914,40

31,75

-

38,10

-

25,50

25,32

34

104

850

965,20

34,93

-

41,30

-

32,50

32,20

36

105

900

1022,35

34,93

-

41,30

-

33,70

33,46

* For other sizes on request. Patented

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.

23


2.2.6 KaMOS® Patented RTJ Gasket, – Model R ØDM

ANSI B 16.5 – MSS SP44 – API Std. (*) Nominal Pressure 1500 # (PN 250)

b

B/H

Centerline

C

C - will flush if possible A

Nominal sizes

ANSI

24

(Inches)

Ring and grove no.

1/2

12

Height of ring

ISO

Pitch diameter of ring

Width of ring

Oval

Octagonal

Approx distance between made up flanges

Approx weight

DN

Dm (mm)

A (mm)

B (mm)

H (mm)

b (mm)

(kg)

(kg)

15

39,70

7,95

14,22

12,70

4,00

0,10

0,10

KaMOS® Oval

KaMOS® Octagonal

3/4

14

20

44,45

7,95

14,22

12,70

4,00

0,12

0,12

1

16

25

50,80

7,95

14,22

12,70

4,00

0,14

0,14

1 1/4

18

-

60,33

7,95

14,22

12,70

4,00

0,16

0,16

1 1/2

20*

40

68,28

7,95

14,22

12,70

4,00

0,18

0,18

2

24*

50

95,25

11,13

17,53

16,00

3,20

0,42

0,40

2 1/2

27*

65

107,95

11,13

17,53

16,00

3,20

0,46

0,46

3

35*

80

136,53

11,13

17,53

16,00

3,20

0,60

0,58

4

39*

100

161,93

11,13

17,53

16,00

3,20

0,70

0,68

5

44*

125

193,68

11,13

17,53

16,00

3,20

0,86

0,84

6

46*

150

211,15

12,70

19,05

17,53

3,20

1,12

1,10

8

50*

200

269,88

15,88

22,35

20,57

4,00

2,08

2,02

10

54*

250

323,85

15,88

22,35

20,57

4,00

2,48

2,42

12

58

300

381,00

22,23

28,70

26,92

4,76

5,14

5,10

14

63*

350

419,10

25,40

33,27

31,75

5,56

7,54

7,62

16

67

400

469,90

28,58

36,58

35,05

7,90

10,36

10,84

18

71

450

533,40

28,58

36,58

35,05

7,90

12,28

12,10

20

75

500

584,20

31,75

39,62

38,10

9,50

15,30

15,94

24

79

600

692,15

34,93

44,45

41,40

11,10

23,10

22,36

* For other sizes on request. Patented

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


2.2.7 KaMOS® Patented RTJ Gasket, – Model R ØDM

ANSI B 16.5 – MSS SP44 – API Std. (*)

C

b

B/H

Centerline

Nominal Pressure 2500 # (PN 420)

C - will flush if possible A

Nominal sizes

ANSI (Inches)

Ring and grove no.

1/2

13

Height of ring

ISO

Pitch diameter of ring

Width of ring

Oval

Octagonal

Approx distance between made up flanges

Approx weight

DN

Dm (mm)

A (mm)

B (mm)

H (mm)

b (mm)

(kg)

(kg)

15

42,88

7,95

14,22

12,70

4,00

0,10

0,10

KaMOS® Oval

KaMOS® Octagonal

3/4

16

20

50,80

7,95

14,22

12,70

4,00

0,14

0,14

1

18

25

60,33

7,95

14,22

12,70

4,00

0,16

0,16

1 1/4

21

-

72,24

11,13

17,53

16,00

3,20

0,27

0,20

1 1/2

23*

40

82,55

11,13

17,53

16,00

3,20

0,36

0,36

2

26*

50

101,60

11,13

17,53

16,00

3,20

0,44

0,44

2 1/2

28

65

111,13

12,70

19,05

17,53

3,20

0,70

0,74

3

32

80

127,00

12,70

19,05

17,53

3,20

0,68

0,66

4

38

100

157,18

15,88

22,35

20,57

4,00

1,20

1,16

5

42

125

190,50

19,05

25,40

23,88

4,00

2,00

1,96

6

47*

150

228,60

19,05

25,40

23,88

4,00

2,36

2,30

8

51

200

279,40

22,23

28,70

26,92

4,76

3,84

3,74

10

55

250

342,90

28,58

36,58

35,05

6,35

7,78

7,50

12

60

300

406,40

31,75

39,62

38,10

7,90

10,74

11,10

* For other sizes on request. Patented

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.

25


2.2.8 KaMOS® Patented RX Gasket

ØDM

C

Centerline

b

B/H

According to API spec 6A/ISO 10423 and ASME B16.20 Types R and RX Gaskets shall be used on 6B flanges. Only BX gaskets shall be used with 6BX flanges. RX and BX gaskets is providing a pressure-energized seal but are not interchangeable.

A

Pressure class rating MPa (psi) Ring no.

13,8

20,7

34,5

(2000)

(3000)

(5000)

Pitch dia. of ring

Outside dia. of ring

Width of ring

Height of ring

Approx Weight

DM

OD

A

H

Kg

19,05 19,05 25,40 25,40 19,05 25,40 25,40 25,40 25,40 25,40 25,40 25,40 25,40 25,40 28,58 41,28 25,40 31,75 25,40 31,75 25,40 50,80 25,40 31,75 25,40 41,28 31,75 41,28 25,40 25,40 25,40 28,58 28,58 31,75 31,75 44,45 45,24 25,40 11,30 11,10 19,05 25,40 25,40

0,56 0,62 0,65 0,70 0,75 0,92 1,06 1,27 1,36 1,70 2,90 2,08 3,75 2,45 5,33 3,52 8,74 5,50 8,74 -

Nominal pipe size (inches)

26

RX20 RX20* RX23 RX24 RX25* RX26 RX27 RX31 RX35 RX37 RX39 RX41 RX44 RX45 RX46 RX47 RX49 RX50 RX53 RX54 RX57 RX63 RX65 RX66 RX69 RX70 RX73 RX74 RX82 RX84 RX85 RX86 RX87 RX88 RX89 RX90 RX91 RX99 RX201* RX205* RX210* RX215 RX215*

1 1/2 2 2 1/2 3 4 6 8 10 12 16 18 20 8 (2) -

1 1/2 2 2 1/2 3 4 6 8 10 12 16 18 20 -

1 1/2 2 3 1/8 2 1/2 3 4 6 8 (2) 8 10 14 8 (2) 1 3/8 1 13/16 2 9/16 4 1/16 4 1/16

C - will flush if possible

Dimensions in millimeters

68,26 68,26 82,55 95,25 101,60 101,60 107,95 123,83 136,53 149,23 161,93 180,98 193,68 211,14 211,14 228,60 269,88 269,88 323,85 323,85 381,00 419,10 469,90 469,90 533,40 533,40 584,20 584,20 57,15 63,50 79,38 90,49 100,01 123,83 114,30 155,58 260,35 234,95 46,04 57,15 88,90 130,18 130,18

76,20 76,20 93,27 105,97 109,54 111,92 118,26 134,54 147,24 159,94 172,64 191,69 204,39 221,84 222,25 245,26 280,59 283,36 334,57 337,34 391,72 441,73 480,62 483,38 544,12 550,07 596,11 600,86 67,87 74,22 90,09 103,58 113,11 139,29 129,77 174,63 286,94 245,67 51,46 62,31 97,64 140,89 140,89

8,74 8,74 11,91 11,91 8,74 11,91 11,91 11,91 11,91 11,91 11,91 11,91 11,91 11,91 13,49 19,84 11,91 16,66 11,91 16,66 11,91 27,00 11,91 16,66 11,91 19,84 13,49 19,84 11,91 11,91 13,49 15,09 15,09 17,48 18,26 19,84 30,18 11,91 5,74 5,56 9,53 11,91 11,91

* Detonates API Ring Type Joints for segmented flanges for dual completions to API Standard 6A. (2) Crossover flange connection Patented Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


2.2.9 KaMOS® Patented BX Gasket

OD

C

B

H

Type 6BX flanges are of the ring joint type and are designed with a raised face. Depending on tolerances, the connection make-up bolting force may react to the raised face of the flange when the gasket has been properly seated. This support prevents damage to the flange or gasket from excessive bolt torque. Therefore one of the flanges in a 6BX connection shall have a raised face. The type 6BX flange shall be on the through-bolted or studded design.

Centerline

According to API spec 6A/ISO 10423 and ASME B16.20.

D

C = approx 50 mm

A

KaMOS® BX Gaskets height is modified to fulfill requirements of distance between flanges for pressure pipe KaMOS® BX Gasket: H = 5 mm higher than standard Pressure class rating MPa (psi) Ring no.

34,5 (5000)

69

103,5

138

(10 000)

(15 000)

(20 000)

Outside dia. KaMOS® height of ring of ring OD

Nominal pipe size (inches)

H

Width of ring

Hole size

Approx Weight

A

D

Kg

Dimensions in millimeters

BX150

-

1 11/16

1 11/16

-

72,19

14,30

9,30

1,59

0,20

BX151

-

1

13/16

1 13/16

1 13/16

76,40

14,63

9,63

1,59

0,24

BX152

-

2

1/16

2

1/16

2

1/16

84,68

15,24

10,24

1,59

0,28

BX153

-

2

9/16

2

9/16

2

9/16

100,94

16,38

11,38

1,59

0,42

BX154

-

3

1/16

3

1/16

3

1/16

116,84

17,40

12,40

1,59

0,56

BX155

-

4

1/16

4

1/16

4

1/16

147,96

19,22

14,22

1,59

-

BX156

-

7

1/16

7

1/16

7

1/16

237,92

23,62

18,62

3,18

2,38

BX157

-

294,46

25,98

20,98

3,18

3,68

BX158

-

11

11

11

352,04

28,14

23,14

3,18

5,26

BX159

-

13 5/8

13 5/8

13 5/8

426,72

30,70

25,70

3,18

7,78

BX160

13 5/8

-

-

-

402,59

28,83

13,74

3,18

3,74

BX161

16 3/4

-

-

-

491,41

33,07

16,21

3,18

6,25

BX162

16

3/4

3/4

-

475,49

19,22

14,22

1,59

3,12

BX163

18

3/4

-

-

-

556,16

35,10

17,37

3,18

6,75

BX164

-

18 3/4

18 3/4

-

570,56

35,10

24,59

3,18

11,60

BX165

21 1/4

-

-

-

624,71

37,03

18,49

3,18

-

BX166

-

21 1/4

-

-

640,03

37,03

26,14

3,18

14,70

BX167*

-

-

-

-

759,36

40,86

13,11

1,59

9,55

BX168*

-

-

-

-

765,25

40,86

16,05

1,59

11,90

BX169

-

5 1/8

-

-

173,51

20,85

12,93

1,59

1,14

BX170

-

6 5/8

6 5/8

-

218,03

19,22

14,22

1,59

1,40

BX171

-

8 9/16

8 9/16

-

267,44

19,22

14,22

1,59

1,70

BX172

-

11 5/32

11 5/32

-

333,07

19,22

14,22

1,59

2,15

BX303*

-

-

-

-

852,75

42,95

16,97

1,59

14,70

9

16

9

3/4

16

9

* BX 167 (26 3/4" - 2000) * BX168 (26” 3000) * BX 303 (30" 2000-3000)

NOTE: Face to face contact is not necessary for the proper functioning of the type 6BX flanges Patented Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.

27


2.2.10 KaMOS® Gasket – Long Pipe Model

Type

Description

KaMOS Product no. + L

Long pipe

KaMOS Product no. + C

Custom requested pipe length

® ®

Centerline

If flangespace is limited, all KaMOS® Gaskets can on request be offered with longer pipes.

2.2.11 KaMOS® Blind Gasket – with pressure gauge

KaMOS® Blind Gasket: •• Gasket •• Measure pressure •• Leakage / installation test •• Blind a flange (Non Pressure retaining)

Centerline

KaMOS® Blind Gasket may be used when the space is the limit.

28

2.2.12 KaMOS® Spectacle Blind Gasket / Plate

KaMOS® Spectacle Blind Gasket/Plate: •• Gasket / Plate •• Leakage / installation test •• Blind a flange (Pressure retaining) •• Comes with lifting ears on request

Centerline

KaMOS® has invented according to ASME B16.48 - Spectacle Blinds and can deliver an integrated spectacle blind gasket/plate that replaces the need of gaskets, blindplate and leakage/installation test that it is correct installed before work on the pipe will start.

2.2.13 KaMOS® Special BX Gasket A special BX gasket with face to face contact. Custom made, and delivered in all requested materials. KaMOS® Special BX Gasket gives face to face contact when required Patented Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


2.2.14 KaMOS® Skillet KaMOS® Skillet is designed to be time, cost and safety efficient when installing KaMOS® Gaskets in pipelines onshore and subsea. KaMOS® Skillet keeps the KaMOS® Gasket centered during installation. KaMOS® Skillet are custom made after customers request of size and materials. All dimensions from 2" to 48" Item

Description

Material

520212000xxxx 520212000xxxx 520212000xxxx 520212000xxxx 520212000xxxx

KaMOS® Skillet KaMOS® Skillet KaMOS® Skillet KaMOS® Skillet KaMOS® Skillet

SS316 SS316L Inc 825 Inc 625 Aluminium 5052

2.2.15 KaMOS® Dust Gasket KaMOS® Dust Gasket is used for closing pipe provisionally. In order for an easy removal and insertion, the KaMOS® Dust Gasket is equipped with a handle. KaMOS® Dust Gasket can be delivered in 3 types - Style R - Style RX - Style BX

29

KaMOS Dust Gasket is available in a wide range of materials. ®

2.2.16 KaMOS® Patented TestSealRing KaMOS® method of leak testing of Clamp Connector with KaMOS® TestSealRing measuring whether tightness has been achieved on all sealing surfaces of Hubs before the Clamp Connector and pipe are subjected to internal pressure, as well as monitor the Clamp Connector connections for future leakages. The KaMOS® method permits Hubs integrity to be tested from the outside before system pressure is applied. In the safety equation this will offer great benefits. It will also in many cases reduce the test time for normal pressure and leak tests because certain repetitions of the tests in case of leaky hubs will be avoided. The KaMOS® test method is based on pressurizing the annular space between the Seal Ring Rib and Seal Ring Lip using test gas. If no pressure loss is recorded during this pressurization, the seal is deemed tight. The test medium that is applied to the annular space is applied by using KaMOS® Test Equipment (containing a reservoir, a manometer and hoses), a simple portable test equipment. KaMOS® Test Equipment is easy to handle and will make it possible to leak test Clamp Connector on a one-off basis without pressurizing entire systems. The KaMOS® test system will also check the Seal Ring Rib and Seal Ring Lip for tightness. Other leak testing methods that is used today cannot distinguish these two sides, only if it is tight or not. Patented Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


Specifications and images are subject to change without notice. Karmsund Maritime Group as is not responsible for typgraphical errors. 2014 - 1 // KaMOSÂŽ PRODUCTS - Karmsund Maritime Offshore Supply as. All rights reserved.


2.3 KaMOS® Patented Intelligent Kammprofil Gasket

Karmsund Maritime Offshore Supply AS (KaMOS®) are now introducing a new leak test method for flanges with raised face and flat face that determine whether tightness has been achived on all sealing surfaces before the flange and pipe are subjected to internal pressure, as well as monitoring the flange connections for future leakages. The KaMOS® method is based on pressurizing the annular space between primary and secondary sealing using test medium. If no pressure loss is recorded the seal is deemed tight.

The test gas is applied using a small portable equipment containing: pressure bottle, manometer and hoses. This test equipment is designed to enable flanges to be tested on a one- off basis with out pressurizing entire system. Some KaMOS® gaskets are sliced on one edge due to effectiveness in production. The KaMOS® gasket may be used several times in installations by getting new sealing material on the metallic core.

31

KaMOS® PATENTED INTELLIGENT KAMMPROFIL GASKET FOR ANSI B16.5 RF FLANGES MEET REQUIREMENTS GIVEN IN ASME B16.20 / B16.47 Series A or B KaMOS® Patented Intelligent gasket gives the opportunity to leak test the flanged connection directly after the flanges are mounted, and also monitor eventual leakages while pipe system is running

Metallic core

Facing materials

Stainless steel grade Carbon steel, Zinc electroplating with yellow chroming

Graphite PTFE

* KaMOS® can deliver other materials on request Primary sealing

Secondary Sealing Metallic core Grove for pressurising

KaMOS Patented Kammprofil gasket materials should always be selected with regard to chemical compatibility and temperature / pressure conditions ®

Tubing for pressurising and monitor leakages

Kammprofil

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


2.3.1 KaMOS® Leaktest Solutions for Kammprofil Gaskets The advantages by using KaMOS® RF & FF Gasket:

••The flange is tested for leaks before the process pressure is applied.

••Flanges that would not otherwise be leak or

pressure tested (such as blind flanges to isolate spools) can be tested.

••Time of testing is significantly reduced, resulting in less downtime due to leak testing.

••KaMOS® Test Equipment is easy to use. ••Volumes of nitrogen required for testing are

Style FS 150 – 2500 lb – 7,5 mm thk

Style FS 150 – 2500 lb – 7,5 mm thk

Style FU 150 – 2500 lb – 7,5 mm thk

Style FU 150 – 2500 lb – 7,5 mm thk

minimal, so large quantities of nitrogen and helium will be saved compared to conventional leak testing.

••The KaMOS® test method can also be used for

continuous monitoring of seals by equipping the annular space with an indicator of gas pressure.

32

••The pressurization line can be used to feed in liquid sealant in case of emergency.

Style RS 150 – 300 lb – 6,5 mm thk

Style RS 400 – 2500 lb – 4,5 mm thk

Style RU 150 – 300 lb – 6,5 mm thk

Style RU 400 – 2500 lb – 4,5 mm thk

RS - Raised face with guide ring RU - Raiced Face without guide ring

Style RS 150 – 2500 lb – 6,5 mm thk

Style RU 400 – 2500 lb – 4,5 mm thk

FS - Flat face with guide ring FU - Flat face without guide ring

Patented

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


2.4 Technical Info – RF & FF Kammprofil Gasket 2.4.1 KaMOS® Kammprofil Gasket – Style RU ØD3 ØD2

KaMOS® Gasket: Style RU - Raised face without guide ring

ØD1

E

B

A

E - will flush if possible

Nominal sizes

Nominal pressure lbs

ANSI

ISO

150

300

400

600

900

1500

2500

inches

DN

D1

D2

D3

D3

D3

D3

D3

D3

D3

1

25

33,3

50,8

63,5

63,5

63,5

63,5

63,5

63,5

63,5

-

42,1

63,5

68,5

68,5

68,5

68,5

68,5

68,5

68,5

40

48,5

73,0

82,8

82,8

82,8

82,8

82,8

82,8

82,8

1

1/4

1 1/2 2

50

60,5

92,1

101,6

101,6

101,6

101,6

101,6

101,6

101,6

2 1/2

65

71,9

104,8

120,9

120,9

120,9

120,9

120,9

120,9

120,9

3

80

88,9

127,0

133,6

133,6

133,6

133,6

133,6

133,6

133,6

3 1/2

-

101,6

139,7

144,7

144,7

144,7

144,7

-

-

-

4

100

114,3

157,2

171,7

171,7

171,7

171,7

171,7

171,7

171,7

5

125

141,2

185,7

193,7

193,7

193,7

193,7

193,7

193,7

193,7

6

150

168,1

215,9

222,0

222,0

222,0

222,0

222,0

222,0

222,0

8

200

218,9

269,9

276,4

276,4

276,4

276,4

276,4

276,4

276,4

10

250

273,0

323,8

336,8

336,8

336,8

336,8

336,8

336,8

336,8

12

300

323,8

381,0

390,0

390,0

390,0

390,0

390,0

390,0

390,0

14

350

355,6

412,7

421,7

421,7

421,7

421,7

421,7

421,7

-

16

400

406,4

469,9

478,9

478,9

478,9

478,9

478,9

478,9

-

18

450

457,2

533,4

542,4

542,4

542,4

542,4

542,4

542,4

-

20

500

508,0

584,2

593,2

593,2

593,2

593,2

593,2

593,2

-

24

600

610,0

692,1

701,1

701,1

701,1

701,1

701,1

701,1

-

Other sizes on request Dimensions in mm

A= 6,5mm B= 7,3mm

A= 4,5mm B= 8,0mm

For 150 lb & 300 lb, RF and RU KaMOS® Kammprofil Gaskets, the entire KaMOS® Indicator/Blind Plug is mounted on the outside of the flange

Patented

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.

33


2.4.2 KaMOS® Kammprofil Gasket – Style RS ØD3 ØD2 ØD1

KaMOS® Gasket: Style RS - Raised face with guide ring

E

B

A

E - will flush if possible

Nominal sizes

34

ANSI

ISO

inches

DN

Nominal pressure lbs

D1

D2

150

300

400

600

900

1500

2500

D3

D3

D3

D3

D3

D3

D3

1

25

33,3

50,8

66,0

66,0

69,8

69,8

76,2

76,2

82,5

1 1/4

-

42,1

63,5

72,9

79,4

79,4

79,4

85,7

85,7

101,6

1 1/2

40

48,5

73,0

82,5

92,1

92,1

92,1

95,2

95,2

114,3

2

50

60,5

92,1

104,0

108,0

108,0

108,0

139,7

139,7

142,8

2 1/2

65

71,9

104,8

120,6

127,0

127,0

127,0

161,9

161,9

165,1

3

80

88,9

127,0

136,0

146,1

146,1

146,1

165,1

171,5

193,7

-

101,6

139,7

158,8

161,9

158,7

158,7

-

-

-

4

100

114,3

157,2

171,5

177,8

174,6

190,5

203,2

206,4

231,7

5

125

141,2

185,7

193,7

212,7

209,5

238,1

244,5

250,8

276,2

6

150

168,1

215,9

222,0

247,7

244,5

263,5

285,8

279,4

314,3

8

200

218,9

269,9

279,0

304,8

301,6

317,5

355,6

349,3

384,1

10

250

273,0

323,8

339,0

358,6

355,6

396,9

431,8

431,8

473,0

12

300

323,8

381,0

406,4

419,1

419,9

454,0

495,3

517,5

546,1

14

350

355,6

412,7

447,7

482,6

479,4

488,9

517,5

574,7

-

16

400

406,4

469,9

511,2

536,6

533,4

561,9

571,5

638,1

-

18

450

457,2

533,4

546,1

593,7

590,5

609,6

635,0

701,7

-

20

500

508,0

584,2

603,0

650,9

644,5

679,5

695,3

752,4

-

24

600

610,0

692,1

714,4

771,5

765,2

787,4

835,0

898,5

-

3

1/2

Other sizes on request Dimensions in mm

A= 6,5mm B= 7,3mm

A= 4,5mm B= 8,0mm

For 150 lb & 300 lb, RF and RU KaMOS® Kammprofil Gaskets, the entire KaMOS® Indicator/Blind Plug is mounted on the outside of the flange

Patented

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


2.4.3 KaMOS® Kammprofil Gasket – Style FU ØD3 ØD2 ØD1

KaMOS Gasket: Style FU - Flat face without guide ring ®

E

B

A

E = approx 50 mm

Nominal sizes

Nominal pressure lbs

ANSI

ISO

150

300

400

600

900

1500

2500

inches

DN

D1

D2

D3

D3

D3

D3

D3

D3

D3

1

25

33,3

50,8

55,8

55,8

55,8

55,8

55,8

55,8

55,8

1 1/4

-

42,1

63,5

68,5

68,5

68,5

68,5

68,5

68,5

68,5

1 1/2

40

48,5

73,0

78,0

78,0

78,0

78,0

78,0

78,0

78,0

2

50

60,5

92,1

97,1

97,1

97,1

97,1

97,1

97,1

97,1

2 1/2

65

71,9

104,8

109,8

109,8

109,8

109,8

109,8

109,8

109,8

3

80

88,9

127,0

132,0

132,0

132,0

132,0

132,0

132,0

132,0

-

101,6

139,7

144,7

144,7

144,7

144,7

144,7

144,7

144,7

4

100

114,3

157,2

162,2

162,2

162,2

162,2

162,2

162,2

162,2

5

125

141,2

185,7

190,7

190,7

190,7

190,7

190,7

190,7

190,7

6

150

168,1

215,9

220,9

220,9

220,9

220,9

220,9

220,9

220,9

3

1/2

8

200

218,9

269,9

274,9

274,9

274,9

274,9

274,9

274,9

274,9

10

250

273,0

323,8

328,8

328,8

328,8

328,8

328,8

328,8

328,8

12

300

323,8

381,0

386,0

386,0

386,0

386,0

386,0

386,0

386,0

14

350

355,6

412,7

417,7

417,7

417,7

417,7

417,7

417,7

417,7

16

400

406,4

469,9

474,9

474,9

474,9

474,9

474,9

474,9

474,9

18

450

457,2

533,4

538,4

538,4

538,4

538,4

538,4

538,4

538,4

20

500

508,0

584,2

589,2

589,2

589,2

589,2

589,2

589,2

589,2

24

600

610,0

692,1

697,1

697,1

697,1

697,1

697,1

697,1

697,1

Other sizes on request Dimensions in mm

A= 7,5 mm B= 6,5 mm

For FU & FS KaMOS® Kammprofil Gaskets the entire KaMOS® Indicator/Blind Plug is mounted on the outside of the flange

Patented

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.

35


2.4.4 KaMOS® Kammprofil Gasket – Style FS ØD3 ØD2

KaMOS® Gasket: Style FS - Flat face with guide ring

ØD1

E

B

A

E = approx 50 mm

Nominal sizes

36

ANSI

ISO

inches

DN

Nominal pressure lbs D1

D2

150

300

400

600

900

1500

2500

D3

D3

D3

D3

D3

D3

D3

1

25

33,3

50,8

66,0

66,0

69,8

69,8

76,2

76,2

82,5

1 1/4

-

42,1

63,5

72,9

79,4

79,4

79,4

85,7

85,7

101,6

1 1/2

40

48,5

73,0

82,5

92,1

92,1

92,1

95,2

95,2

114,3

2

50

60,5

92,1

104,0

108,0

108,0

108,0

139,7

139,7

142,8

2 1/2

65

71,9

104,8

120,6

127,0

127,0

127,0

161,9

161,9

165,1

3

80

88,9

127,0

136,0

146,1

146,1

146,1

165,1

171,5

193,7

-

101,6

139,7

158,8

161,9

158,7

158,7

-

-

-

4

100

114,3

157,2

171,5

177,8

174,6

190,5

203,2

206,4

231,7

5

125

141,2

185,7

193,7

212,7

209,5

238,1

244,5

250,8

276,2

6

150

168,1

215,9

222,0

247,7

244,5

263,5

285,8

279,4

314,3

8

200

218,9

269,9

279,0

304,8

301,6

317,5

355,6

349,3

384,1

10

250

273,0

323,8

339,0

358,6

355,6

396,9

431,8

431,8

473,0

12

300

323,8

381,0

406,4

419,1

419,9

454,0

495,3

517,5

546,1

14

350

355,6

412,7

447,7

482,6

479,4

488,9

517,5

574,7

-

16

400

406,4

469,9

511,2

536,6

533,4

561,9

571,5

638,1

-

18

450

457,2

533,4

546,1

593,7

590,5

609,6

635,0

701,7

-

20

500

508,0

584,2

603,0

650,9

644,5

679,5

695,3

752,4

-

24

600

610,0

692,1

714,4

702,0

765,2

787,4

835,0

898,5

-

3

1/2

Other sizes on request Dimensions in mm

A= 7,5 mm B= 6,5 mm

For FU & FS KaMOS® Kammprofil Gaskets the entire KaMOS® Indicator/Blind Plug is mounted on the outside of the flange

Patented

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


2.4.5 KaMOS® Graphite for Reusable KaMOS® Kammprofil Gasket

The KaMOS® Kammprofil Gasket may be used several times in installations by changing to new sealing material on the metallic core. Graphite is without doubt the premier sheet gasket material available in the market today. This totally non-toxic, high purity carbon material, containing no respirable fibres, binders, lubricating agents or other unsurpassable by any other available sealing material.

ensure long service life, even in the presence of highly corrosive and toxic media. Low leachable and total chloride content aid in the avoidance of intergranular corrosion of austenitic stainless steel piping systems.

Based on the same material utilized in spiral wound gasket production, Graphite sheet gaskets provide conformable, low sealing stress seals, ideal for use on both rough and smooth flanges.

Physical Properties The following physical properties are based on a standard purify 98% carbon foil, 0,35 mm thickness at a density of 1,0g/cm3

The self lubricating homogeneous structure exceptional chemical and temperature resistance Description

Technical Data

Type

Description

Sublimination point

3650°C (6602°F)

30000000-01,00

Grafitt set (2off) 1" KaMOS Kammprofil

Tensile strength

5.5 MN/m2

30000000-01,50

Grafitt set (2off) 1 1/2" KaMOS® Kammprofil

Ash Content

2%

30000000-02,00

Grafitt set (2off) 2" KaMOS® Kammprofil

Leachable chloride ion content

50 p.p.m.(Certifiable on request)

30000000-02,50

Grafitt set (2off) 2 1/2" KaMOS® Kammprofil

Leachable fluoride ion content

50 p.p.m.(Certifiable on request)

30000000-03,00

Grafitt set (2off) 3" KaMOS® Kammprofil

30000000-04,00

Grafitt set (2off) 4" KaMOS® Kammprofil

30000000-06,00

Grafitt set (2off) 6" KaMOS® Kammprofil

Temperature range:

37 ®

Inert or reducing atmospheres

-200°C to 3000°C (328-5432°F)

30000000-08,00

Grafitt set (2off) 8" KaMOS® Kammprofil

Oxidizing atmospheres

-200°C to 500°C (328-932°F)

30000000-10,00

Grafitt set (2off) 10" KaMOS® Kammprofil

Gas permeability

<10cm-3/S

30000000-12,00

Grafitt set (2off) 12" KaMOS® Kammprofil

30000000-14,00

Grafitt set (2off) 14" KaMOS® Kammprofil

30000000-16,00

Grafitt set (2off) 16" KaMOS® Kammprofil

Specific Electrical resistance: Parallel to surface

10Ω mm2/m

30000000-18,00

Grafitt set (2off) 18" KaMOS® Kammprofil

Perpendicular to surface

600Ω mm2/m

30000000-20,00

Grafitt set (2off) 20" KaMOS® Kammprofil

30000000-24,00

Grafitt set (2off) 24" KaMOS® Kammprofil

30000000-28,00

Grafitt set (2off) 28" KaMOS® Kammprofil

Thermal conductivity: Parallel to surface

200 W/mk

30000000-30,00

Grafitt set (2off) 30" KaMOS® Kammprofil

Perpendicular to surface

7 W/mk

30000000-36,00

Grafitt set (2off) 36" KaMOS® Kammprofil

Approvals BAM Tgb No. 8560/86-4-2855

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


2.5 KaMOS® Test Equipment

KaMOS® Test Equipment is designed as light portable equipment, consisting of a reservoir, manometers and hose. The equipment is easy to handle and will make it possible to leak test flanges on a one- off basis without pressurizing the entire pipe system.

2.5.1 KaMOS® Nitrogen Test Equipment, Type 200500 – for testing of KaMOS® Gaskets at site, 0-200 bar KaMOS® Nitrogen Test Equipment has a test range at 0-200 bar, and is to be used at site. KaMOS® Nitrogen Test Equipment comes in a case where all the parts fit in, for easy transportation. Various lengths of KaMOS® Test Hose can be ordered on request. (see chapter 2.5.6).

All KaMOS® Test Equipments incl. a KaMOS® Test Plug, Type 200100 and Pelican Case 1600

38 Pos Type 1

200500-01

Pressure bottle, 5l Nitrogen, NS4055 connection*

2

200500-02

Pressure regulator R21, 0-200 bar

3

200500-03

Adapter

4

200500-04

T-coupling/valve

5

200500-05

Quick release male coupling, TEMA

6

200500-06

Quick release female coupling, TEMA

7

200500-07

Test hose, 630 bar, 2,5 m length

8

200500-08

Pelican Case 1600

9

200100

KaMOS® Test Plug, AISI 303

Dimension 620 x 500 x 220 mm (in Pelican Case) Weight

2

Desctiption

3

6 5 4 9

1

7

Test Equipment

6

Approx 17 kg incl. Pelican Case.

* See chapter 2.5.8 for refill connection to other standards.

8

Patented

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


2.5.2 KaMOS® Hydraulic Test Equipments

Type

Description

200800

KaMOS® Hydraulic Test Equipment 0-400 bar

Manual manometer

200810

KaMOS Hydraulic Test Equipment 0-700 bar

Manual manometer

®

39

All KaMOS® Test Equipments incl. a KaMOS® Test Plug, Type 200100 and storage box for KaMOS® Hydraulic Test Equipment

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


KaMOS® Hydraulic Test Equipment, Type 200800 – manual

Pos Type

Desctiption

1

200800-01

Hydraulic pump, 10.000 psi

2

200800-15

Protection frame, Aluminium 700 mm

3

200800-11

Manometers, 0-400 bar

4

200800-10

Valve, 400 bar

5

200500-05

Quick release male coupling *

6

200500-06

Quick release female coupling *

7

200500-07

Test hose, 630 bar, 2,5 m length *

8

200100

KaMOS® Test Plug, AISI 303

Dimensions 800 x 290 x 300 mm Weight Approx 16 kg (incl. hose and storage box) * Same as used with KaMOS® Test Equipment type 200500. Weight incl. storage box is 16 kg

40 – for testing of KaMOS® Gaskets, 0-400 bar

KaMOS® Hydraulic Test Equipment, Type 200800 has a test range 0-400 bar, and can be used both subsea or at site. Incl. Hf 95 Y Enerpac Hydraulic oil.

1

2

3

4

5

6

7 8

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


KaMOS® Hydraulic Test Equipment 10K, Type 200810 - manual

Pos Type

Desctiption

1

200800-01

Hydraulic pump, 10.000 psi *

2

200800-15

Protection frame, Aluminium 700 mm *

3

200810-07

Manometers, 0-1000 bar

4

200810-04

Valve, 10K

5

200810-09

Quick release male coupling 10K

6

200810-10

Quick release female coupling 10K

7

200810-13

Test hose, 700 bar, 3 m length

8

200100-010

KaMOS® Test Plug, AISI 303

Dimensions 800 x 290 x 300 mm Weight Approx 18 kg (incl. hose and storage box) * Same as used with KaMOS® Test Equipment type 200800. Weight incl. storage box is 18 kg

41 – for testing of KaMOS® Gaskets, 0-700 bar

KaMOS® Hydraulic Test Equipment 10K, Type 200810 has a test range 0-700 bar, and can be used both subsea or at site. Incl. Hf 95 Y Enerpac Hydraulic oil.

1

2

3

4

5

6

7

8

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


2.5.3 KaMOS® Test Plug / Indicator / Blind Plug Cap

KaMOS® Test Plug is to be used for the pressure test when KaMOS® Gaskets are installed, and will be replaced by either a KaMOS® Indicator for future leakage surveillance or KaMOS® Blind Plug Cap.

KaMOS® Test Plug

KaMOS® Indicator

KaMOS® Blind Plug

Test and surveillance units

42

Description/Materials

Length

AISI303

SS316

KaMOS® Test Plug * (1) KaMOS® Test Plug * KaMOS® Test Plug 10K * KaMOS® Test Plug custom made

74 mm+ 125 mm 74 mm

200100 200170 200100-010

200101 200102 200103 200104 0,078 200171 200172 200173 200174 0,100 200101-010 200102-010 200103-010 200104-010 0,160

on request

200100-C

200101-C

200102-C

200103-C

200104-C

-

KaMOS® Indicator (1)

50 mm

200200

200201

200202

200203

200204

0,027

on request

200200-C

200201-C

200202-C

200203-C

200204-C

-

50 mm

200300

200301

200302

200303

200304

0,030

KaMOS Blind Plug

30 mm

200310

200311

200312

200313

200314

0,020

KaMOS® Blind Plug KaMOS® Blind Plug custom made

95 mm

200350

200351

200352

200353

200354

0,050

on request

200300-C

200301-C

200302-C

200303-C

200304-C

-

KaMOS® Indicator custom made KaMOS® Blind Plug (1) ®

SS316L

Inc 825

Inc 625

Approx Weight

(1) Standard * To be connected to KaMOS® Test Hose with the incl. TEMA quick release male 1/8" BSP, Steel SS1914-04 +Quick connection

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


2.5.4 KaMOS® Pipe Support / Vibration Set

KaMOS® offers all sizes Pipe Support/Vibration set for the KaMOS® Gasket test pipe. Produced in PVC.

Vibration Set for KaMOS® RTJ Type

Description

300R00600-01,5

Vibration clamp set 1 1/2” KaMOS RTJ # 600

R-20

300R00600-02

Vibration clamp set 2” KaMOS RTJ # 600

R-23

300R00600-04

Vibration clamp set 4” KaMOS RTJ # 600

R-37

300R00600-06

Vibration clamp set 6” KaMOS RTJ # 600

R-45

300R00600-08

Vibration clamp set 8” KaMOS RTJ # 600

R-49

300R00600-10

Vibration clamp set 10” KaMOS RTJ # 600

R-53

300R00900-01,5

Vibration clamp set 1 1/2” KaMOS RTJ # 900

R-20

300R00900-02

Vibration clamp set 2” KaMOS RTJ # 900

R-24

300R00900-04

Vibration clamp set 4” KaMOS RTJ # 900

R-37

300R00900-06

Vibration clamp set 6” KaMOS RTJ # 900

R-45

300R00900-08

Vibration clamp set 8” KaMOS RTJ # 900

R-49

300R00900-10

Vibration clamp set 10” KaMOS RTJ # 900

R-53

300R01500-01,5

Vibration clamp set 1 1/2” KaMOS RTJ # 1500

R-20

300R01500-02

Vibration clamp set 2” KaMOS RTJ # 1500

R-24

300R01500-04

Vibration clamp set 4” KaMOS RTJ # 1500

R-39

300R01500-06

Vibration clamp set 6” KaMOS RTJ # 1500

R-46

300R01500-08

Vibration clamp set 8” KaMOS RTJ # 1500

R-50

300R01500-10

Vibration clamp set 10” KaMOS RTJ # 1500

R-54

KaMOS® Vibration Clamp for RTJ

43

Design protected

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


Vibration Set for KaMOS® Kammprofil

44

Type

Description

300RS0150-01

Vibration clamp set 1" KaMOS Kammprofil RS # 150

300RS0150-02

Vibration clamp set 2" KaMOS Kammprofil RS # 150

300RS0150-03

Vibration clamp set 3" KaMOS Kammprofil RS # 150

300RS0150-04

Vibration clamp set 4" KaMOS Kammprofil RS # 150

300RS0150-06

Vibration clamp set 6" KaMOS Kammprofil RS # 150

300RS0150-10

Vibration clamp set 10" KaMOS Kammprofil RS # 150

300RS0150-12

Vibration clamp set 12" KaMOS Kammprofil RS # 150

300RS0150-14

Vibration clamp set 14" KaMOS Kammprofil RS # 150

300RS0150-16

Vibration clamp set 16" KaMOS Kammprofil RS # 150

300RS0150-18

Vibration clamp set 18" KaMOS Kammprofil RS # 150

300RS0150-24

Vibration clamp set 24" KaMOS Kammprofil RS # 150

300RS0150-36

Vibration clamp set 36" KaMOS Kammprofil RS # 150

300RS0300-01

Vibration clamp set 1" KaMOS Kammprofil RS # 300

300RS0300-04

Vibration clamp set 4" KaMOS Kammprofil RS # 300

300RS0300-08

Vibration clamp set 8" KaMOS Kammprofil RS # 300

300RS0300-14

Vibration clamp set 14" KaMOS Kammprofil RS # 300

300RS0600-01

Vibration clamp set 1" KaMOS Kammprofil RS # 600

300RS0600-01,5

Vibration clamp set 1 1/2" KaMOS Kammprofil RS # 600

300RS0600-02

Vibration clamp set 2" KaMOS Kammprofil RS # 600

300RS0600-02,5

Vibration clamp set 2 1/2" KaMOS Kammprofil RS # 600

300RS0600-03

Vibration clamp set 3" KaMOS Kammprofil RS # 600

300RS0600-04

Vibration clamp set 4" KaMOS Kammprofil RS # 600

300RS0600-06

Vibration clamp set 6" KaMOS Kammprofil RS # 600

300RS0600-08

Vibration clamp set 8" KaMOS Kammprofil RS # 600

300RS0600-10

Vibration clamp set 10" KaMOS Kammprofil RS # 600

300RS0600-12

Vibration clamp set 12" KaMOS Kammprofil RS # 600

300RS0600-14

Vibration clamp set 14" KaMOS Kammprofil RS # 600

300RS0600-16

Vibration clamp set 16" KaMOS Kammprofil RS # 600

300RS0600-18 Design protected

Vibration clamp set 18" KaMOS Kammprofil RS # 600

300RS0600-20

Vibration clamp set 20" KaMOS Kammprofil RS # 600

300RS0600-24

Vibration clamp set 24" KaMOS Kammprofil RS # 600

300RS0600-28

Vibration clamp set 28" KaMOS Kammprofil RS # 600

300RS0600-30

Vibration clamp set 30" KaMOS Kammprofil RS # 600

300RS0600-36

Vibration clamp set 36" KaMOS Kammprofil RS # 600

300RS0900-10

Vibration clamp set 10" KaMOS Kammprofil RS # 900

300FS0600-06

Vibration clamp set 6" KaMOS Kammprofil FS # 600

300FS0600-08

Vibration clamp set 8" KaMOS Kammprofil FS # 600

KaMOS® Vibration Clamp for RS

Product number for other dimensions on request. Produced in all sizes

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


2.5.5 KaMOS® Hose Reel, Type 200700

KaMOS® offers standard hose reels for the KaMOS® Test Hose. The Hose Reel is recommended and makes the handling of test hose easier when in use, and ideal for handling and storing. Custom made hosereels are offered on request if out of standard. Hose to be ordered separately (chapter 2.5.6)

Type

Description

200700

KaMOS Hose Reel, SS316 frame, Aluminium reel Store up to 500 meter hose.

200710

KaMOS® Hose Reel 10K, SS316 frame, Aluminium reel Store up to 150 meter hose.

200700-C

KaMOS® Hose Reel Custom requested

KaMOS® Hose Reel 200700

®

KaMOS® Hose Reel 10K 200710

2.5.6 KaMOS® Test Hose for KaMOS® Test Equipment All KaMOS® Test Hoses comes with female quick connection(1)/(2), on both ends. KaMOS® Test Hoses is tested and certified up to 400 bar.Various lengths can be ordered on request.

Type

Description

200500-07

KaMOS® Test hose, 2,5 m standard (1)

200501

KaMOS® Test Hose, length on request (1)

200500-12

KaMOS® Test Hose, 20 m (1)

200500-13

KaMOS® Test Hose, 30 m (1)

200500-15

KaMOS® Test Hose, 50 m (1)

200810-13

KaMOS® Test hose 10K, 3 m standard (2)

200810-18

KaMOS® Test Hose 10K, length on request (2)

KaMOS® Test hose, 2,5 m standard (1)

200500-06 Quick release female coupling. Electrozinkplated and yellow passivated. Max 630 bar.

(1)

200810-10 Quick release female coupling 10K. Electrozinkplated and yellow passivated.

(2)

KaMOS® Test hose 10K, 3 m standard (2)

Connections to go with standard hose connections (chapter 2.5.8).

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.

45


2.5.7 KaMOS® Unit for Pressure Reading / Recording If pressure reading/recording is required KaMOS® offers a unit that most common reading/recording equipment will fit. Type

200900

Size

400 x 400 x 210 mm

Weight

Approx 7 kg

Connections

Male quick connections, TEMA 120, 1/8" BSP outside threads

Manometer

Std. 0-250 bar (dia. 160 mm) incl. calibration certificate

Material

Aluminium frame, SS316 parts

2.5.8 KaMOS® Test / Refill Connectors 46

In case of problems with refill of Nitrogen bottle, KaMOS® stock the most common connectors Type

Description

200500-05

TEMA quick release male 1/8" BSP, Steel SS1914-04, cut threads. TEMA Quick release female coupling, cut threads. Electrozinkplated and yellow passivated. Max 630 bar

200500-06 200810-09

TEMA quick release male 10K, cut threads.

200810-10

TEMA Quick release female coupling 10K, cut threads. Electrozinkplated and yellow passivated.

200906-01

Connector 3/8" NPT male to 1/2" NPT male ss 10.000 PSI

200906-02

Connector 1/4" NPT male to 3/8" NPT male SS 10.000 PSI

Type

Description

200901

NO - US (Norwegian bottle - US regulator), Brass alloy RA359S

200902

UK - NO (UK bottle - Norwegian regulator), Brass alloy RA359S

200903

NO - UK (Norwegian bottle - UK regulator), Brass alloy RA359S

200904

US - NO (US bottle - Norwegian regulator), Brass alloy RA359S

KaMOS® can also deliver other combinations of standards and other materials on request

TEMA Quick release female 200500-06

TEMA Quick release male 200500-05

TEMA Quick release female 10K 200810-10

TEMA Quick release male 10K 200810-09

NO-US 200901

UK-NO 200902

NO-UK 200903

US-NO 200904

Patented

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


2.6 KaMOS® Flanges and Caps

2.6.1 KaMOS® Flange When space is limited we recommend KaMOS® Flange with space for test pipes.

2.6.2 KaMOS® Distance Caps ••KaMOS® distance caps keep the torque in the bolts more steady. ••The bolt will be prevented and get longer lifetime. ••The distance in accordance to standards will be more accurant. ••It will be easier to get the correct torque.

2.6.3 KaMOS® Flange Caps 47

KaMOS® has invented and recommend new released flange caps for monitoring and prevent flanges in rough environments.

2.7 KaMOS® Gasket Installation Tool KaMOS® has developed a new method for a safer and faster way to install gaskets within the flange assembly. The KaMOS® Gasket Installation Tool • to be used in all flange connections including compact flanges, and are not limited to any weight. • self-aligns the gasket in the ring groove, is removable and can be reused. • protect the diver and other users in a safe way, by using KaMOS® DistIN Tool there is no need for use of hands or other tools between the flanges. Simply remove the bolt where the KaMOS® Installation Tool is to be used, place the KaMOS® Gasket Installation tool and reinstall the bolt, apply the KaMOS® DistIN Tool to place the gasket into the right position. The KaMOS® DistIN Tool is labelled with a distance mark to easily check that the gasket is in the right position before the bolt tension/torque start. Start to tension/torque the bolt next to the KaMOS® Installation Tool, when the gasket have started to enter the groove, remove the KaMOS® Gasket Installation Tool and complete the tension/torque. Installation of the tool is very easy, other installations on the gasket is not required - only thing needed is KaMOS® Gasket Installation Tools and one KaMOS® DistIN Tool.

Patented

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


48

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOSÂŽ PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


3

KaMOS® Tools

3.1 KaMOS® Patented Portable Valve Actuator KaMOS® Patented Portable Valve Actuator increases the effiency when opening and closing manually operated heavy duty valves, head valves and gas transport valves for on- and offshore industry. KaMOS® Patented Portable Valve Actuator was designed in co-operation with supervisor and operators who daily operate these units. KaMOS® Patented Portable Valve Actuator is cost effective and releases workers for other jobs. For valves taking up to 4 man-hours to open and close, KaMOS® Patented Portable Valve Actuator will perform the same work in 5 minutes with only one person to operate. KaMOS® Patented Portable Valve Actuator is patented and was released in 1989. The instrument is now being used in most industries that have manual valves. Because it is air driven, the KaMOS® Patented Portable Valve Actuator has no explosive danger for operating explosive fluids.

Type 101000

49

KaMOS® produces the actuator in 2 sizes. An original sized KaMOS® Patented Portable Valve Actuator has a stronger force suitable for manual, heavy duty valves. And a mini KaMOS® Patented Portable Valve Actuator of smaller dimensions for use on manual light duty valves. Both KaMOS® Patented Portable Valve Actuator’s has an adjustable air- in twisting handle/valve. It is also reversible. KaMOS® Patented Drive Plates for the KaMOS® Patented Portable Valve Actuator’s are special designed for the tool and will be delivered with all parts needed for installation at the valve wheel. KaMOS® Storage Box incl. air filter, lubrication device, automatic hose reel and reduction valve to adjust the speed and torque to the desired level is available to ensure proper care and maintenance of the equipment. It is to be stored stationary by the air outlet, but can also be delivered on a trolley.

Type 102000

Type 101000

Type 102000

KaMOS® offers special training and Maintenance Courses for operators at KaMOS®. Training-centre or on/offshore at customers’ site

Patented

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


3.1.1 KaMOS® Patented Portable Valve Actuator, Type 101000

The KaMOS® Patented Portable Valve Actuator Type 101000 is designed to be used on manual heavy duty valves. The tool is time, cost and safety efficient and valves that take several hours to operate manually will, by using the KaMOS® Patented Portable Valve Actuator take only 10% of the time. Extra equipment is offered to get higher torque, speed and flexibility. The KaMOS® Patented Portable Valve Actuator Type 101000, when combined with the KaMOS® Actuator Trolley LB (see 3.4.3), will not only save valuable time, but will help prevent possible worker injuries.

Type

101000

Length

1182 mm

Opening through angle head

Ø 54 mm

Width across flats of angle head

NV 60 mm

Air inlet thread size

1/2"

Weight

11,4 kg (25,1 lbs)

Air need

1860 L/min

Speed without load* range

75 O/min

Safe operating pressure

4-7 Bar

Recom. pressure

6,2 Bar (90 psi)

Torque at recommended

480 Nm (340 ft lbs)

Materials

Ingersoll Rand/SS

Operating Area

Heavy Duty: 6" and above

* 6,2 bar (90 psi)

50

3.1.2 KaMOS® Patented Drive Plate for KaMOS® Patented Portable Valve Actuator, Type 101000 The KaMOS® Patented Drive Plate is to be installed stationary at the valve wheel and comes with an installation set. Diameter plate ∅ 250 mm. Diameter through connector approx ∅ 48 mm. Material: Drive Plates: Cast Iron, EN-GJS-500-7, Standard NS-EN 1563 Zinc electroplating with yellow chroming. Installation sets: (AISI1035) DIN C35 EN 10250-2:1999, Number: 1.0501. FZB cromated. Hexagon nuts: DIN EN ISO 4032

Type 101100

Type 101110

Type 101115

Connector

Approx weight

Type

Description

101100

KaMOS® Patented Drive Plate std. 50 mm

4,4 kg

101110

KaMOS® Patented Drive Plate

100 mm

5,0 kg

101115

KaMOS® Patented Drive Plate

150 mm

5,5 kg

101120

KaMOS® Patented Drive Plate

200 mm

5,9 kg

101100-05 KaMOS® Patented Installation Set of 3

0,6 kg

Patented

* KaMOS® Installation Set is incl. with all the KaMOS® Patented Drive Plates

Type 101120

Installation set 101100-05

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


3.1.3 KaMOS® Patented Portable Valve Actuator, Type 102000 The KaMOS® Patented Portable Valve Actuator Type 102000 is designed to be used on manual light duty valves and manifolds. The tool is time, cost and safety efficient and valves that take several hours to operate manually will, by using the KaMOS® Patented Portable Valve Actuator take only 10% of the time. Extra equipment is offered to use the tool at manually operated winches and other areas.

Type

102000

Length

480 mm

Dia. through angle head

27 mm

Width across flats of angle head

NV 32

Air inlet thread size

1/4"

Weight

4 kg (8,8 lbs)

Air need

780 L/min (27 cfm)

Speed without load* range

136 O/min

Safe operating pressure

4-7 Bar

Recom. pressure

6,2 Bar (90 psi)

Torque at recommended

120 Nm (85 ft lbs)

Materials

Ingersoll Rand/SS

Operating Area

Heavy Duty: 6" and below

* 6,2 bar (90 psi)

51

3.1.4 KaMOS® Patented Drive Plate for KaMOS® Patented Portable Valve Actuator, Type 102000 The KaMOS® Patented Drive Plate is to be installed stationary at the valve wheel and comes with an installation set. Diameter plate ∅ 175 mm. Diameter through connector approx ∅ 27 mm. Material: Drive Plates: Cast Iron, EN-GJS-500-7, Standard NS-EN 1563 Zinc electroplating with yellow chroming.

Description

102100

KaMOS® Patented Drive Plate std. 30 mm

1,3 kg

102110

KaMOS Patented Drive Plate

100 mm

1,6 kg

102115

KaMOS Patented Drive Plate

150 mm

1,8 kg

102120

KaMOS® Patented Drive Plate

200 mm

2,0 kg

® ®

Connector

Approx weight

Type

102100-05 KaMOS® Installation Set of 3

0,20 kg

* KaMOS® Installation Set is incl. with all the KaMOS® Patented Drive Plates

Installation sets: (AISI1035) DIN C35 EN 10250-2:1999, Number: 1.0501. FZB cromated. Hexagon nuts: DIN EN ISO 4032.

Type 102100

Type 102110

Type 102115

Type 102120

Installation set 102100-05

Patented

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


3.1.5 Security Locker, Type 101121 for KaMOS® Patented Drive Plates KaMOS® offers modification for KaMOS® Patented Drive Plates Type 101120 to incl. a Security Locker function. The Security locker function gives the operator a better HSE control when operating KaMOS® Patented Portable Valve Actuator connected to the KaMOS® Patented Drive Plate and give better stability when operating valves in difficult areas.

52

Type

Description

101121

Modification incl. springsteel clamp and Driveplate 101120

3.1.6 Security Chain, Type 101010 for KaMOS® Patented Portable Actuators KaMOS® offers HSE designed Security Chain to give the operator a ergometric support when handling the KaMOS® Patented Portable Valve Actuator. Type

Description

101010

Security Chain for KaMOS® Patented Portable Valve Actuator 101000

102010

Security Chain for KaMOS® Patented Portable Valve Actuator 102000

101010 - Security Chain for KaMOS® Patented Portable Valve Actuator 101000

102010 - Security Chain for KaMOS® Patented Portable Valve Actuator 102000

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


3.2 Extra Equipment for KaMOS® Patented Portable Valve Actuator

KaMOS® offers extra equipment for KaMOS® Patented Portable Valve Actuator suitable for different usage and situations.

KaMOS® Patented Portable Valve Actuator may be used for all types of operations where rotating operations are needed.

3.2.1 KaMOS® Speed Multiplier for KaMOS® Patented Portable Valve Actuator, Type 101000 When using the KaMOS® Speed Multiplier together with the KaMOS® Patented Portable Valve Actuator, Type 101000 the speed will be multiplied by 4.

Type

Description

103110

Multi- Gear Drive (x4) 3/4” - speed

Extra items needed for use: 101200

KaMOS® Adapter for gear x4 torque, 1”

103102

Socket Wrench for KaMOS® Patented Drive Plate Type 101100, 60mm, 3/4”

103103

Adapter/Multi- Gear Drive connection 3/4”

3.2.2 KaMOS® Torque Multiplier for KaMOS® Patented Portable Valve Actuator, Type 101000 When using the KaMOS® Torque Multiplier together with the KaMOS® Patented Portable Valve Actuator, Type 101000 the torque will be multiplied by 4.

Type

Description

103110

Multi- Gear Drive (x4) 3/4” - torque

Extra items needed for use: 103101

KaMOS® Adapter for gear x4 torque

103104

Socket Wrench for KaMOS® Patented Drive Plate Type 101100, 60mm, 1”

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.

53


3.2.3 KaMOS® Adapter for Spindle Valves

KaMOS® is designing products for the customers' requirements. In situations where the valve spindle does not fit with the KaMOS® Patented Drive Plates special customised design can be offered. These solutions are made on request and designed to fit requested measurement.

54

Type

Description

105000 105001 105002 105003 105004 105005 105006 105010 105011 105012 105013 105014 105015 105016 105017 105018 105019 105020 105021 105022 105023 105024 105025 105026 105027 105028 105029

KaMOS® Actuator with IR head KaMOS® Adaptor for Drive Plate, Type 102100 installed at deep valve wheels, 200 mm KaMOS® Adapter for manuell IKM winch KaMOS® Adapter for Actuator, Type 102000 for use at Kamos ® Patented Driveplate Type 101100 KaMOS® Adapter for gearbox KaMOS® Adapter for Actuator, Type 101000 for use at Driveplate Type 102100 KaMOS® Adapter for KaMOS® Patented Portable Valve Actuator - 5 armet KaMOS® Adapter for spindle valves 500 mm, alum 6061 KaMOS® Adapter for spindle valves 600 mm, alum 6061 KaMOS® Adapter for spindle valves 700 mm, alum 6061 KaMOS® Adapter for spindle valves 800 mm, alum 6061 KaMOS® Adapter for spindle valves 900 mm, alum 6061 KaMOS® Adapter for spindle valves 1000 mm, alum 6061 KaMOS® Adapter for spindle valves 1100 mm, alum 6061 KaMOS® Adapter for spindle valves 1200 mm, alum 6061 KaMOS® Adapter for spindle valves 1300 mm, alum 6061 KaMOS® Adapter for spindle valves CUSTOM LENGTH, alum 6061 KaMOS® Adapter for spindle valves 500 mm, SS316 KaMOS® Adapter for spindle valves 600 mm, SS316 KaMOS® Adapter for spindle valves 700 mm, SS316 KaMOS® Adapter for spindle valves 800 mm, SS316 A KaMOS® Adapter for spindle valves 900 mm, SS316 KaMOS® Adapter for spindle valves 1000 mm, SS316 KaMOS® Adapter for spindle valves 1100 mm, SS316 KaMOS® Adapter for spindle valves 1200 mm, SS316 KaMOS® Adapter for spindle valves 1300 mm, SS316 KaMOS® Adapter for spindle valves CUSTOM LENGTH, SS316 A

105003

105001

A

105005

A

A

A t 3

® Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 //AKaMOS PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved. t 3

A


3.2.4 KaMOS® Strengthener for KaMOS® Anglehead

Type

Description

101001-30

Strengthener for KaMOS® Anglehead, Type 101001 Material: SS316

3.2.5 KaMOS® Valve Wheel, Type 105100 The KaMOS® Valve Wheel is designed to fit all types of valves. The KaMOS® Valve Wheel is universal and connector to fit the KaMOS® Patented Portable Valve Actuator is integrated in the wheel. The KaMOS® Valve Wheel will be made on request and design is required.

Keyway

55 Hexagon

KaMOS offers drive adaptors to suit all types of valve input shaft/gearboxes. ®

For connection direct to stem, see chapter 3.2.8. Double «D»

Patented

3.2.6 KaMOS® Adapter Valve Drive Spline Type 105101 105102 105103 105104 105004-01 105004-02 105004-03

Description KaMOS® Adapter Valve Drive Spline for Type 101000, Carbon steel KaMOS® Adapter Valve Drive Spline for Type 101000, Carbon steel, Keyway KaMOS® Adapter Valve Drive Spline for Type 101000, Carbon steel, Hexagon KaMOS® Adapter Valve Drive Spline for Type 101000, Carbon steel, Double “D” KaMOS® Adapter for gearbox, SS316, Keyway KaMOS® Adapter for gearbox, SS316, Hexagon KaMOS® Adapter for gearbox, Double “D”

105101

105004

Other materials on request.

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


3.2.7 IR Angleheads Standard Ingersoll Rand (IR) Angleheads are available for the KaMOS® Patented Portable Valve Actuator.

Type

Description

101006

Standard 9RSQ Anglehead

102006

Standard 7RLN Anglehead

Standard 9RSQ Angelhead

Standard 7RLN Angelhead

3.2.8 Adapters and Couplings for KaMOS® Equipment KaMOS® provides all types of adapters and couplings needed for the KaMOS® Tools and Equipment.

56

Type

Description

106000-04

Jaw Clutch, offshore coupling w/hosepipe

106000-05

Jaw Clutch, offshore coupling w/1/2" male threads

101003-08

Quick release coupling, male 1/2" for KaMOS® Patented Portable Valve Actuator, Type 101000 Quick release coupling, female 1/2" for KaMOS® Patented Portable Valve Actuator, Type 101000 and 102000

101003-09 103003*-12 106000-01 106000-02 106000-03

106000-04

106000-05

101003-08

101003-09

103003*-12

106000-03

Hose Clip, 15-24 mm, Size-08 Quick Release Coupling, male 1/2" for KaMOS® Patented Portable Valve Actuator, Type 101000 Quick Release Coupling, female 1/2" for KaMOS® Patented Portable Valve Actuator, Type 101000 & 102000 Quick release coupling, male 1/4" for KaMOS® Patented Portable Valve Actuator, Type 102000

106000-06

Hose claw 15-24 mm

106000-07

Offshore Coupling with external thread 1/4"

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


3.2.9 KaMOS® Wrench with IR Anglehead

Type

105000

Length

1182 mm

Air inlet thread size

1/2"

Weight

7,4 kg

Air need

1860 L/min

Speed without load* range

300 O/min

Safe operating pressure

4-7 Bar

Recom. pressure

6,2 Bar (90 psi)

Torque at recommended

120 Nm (85 ft lbs)

Materials

Ingersoll Rand/Stainless steel

Operating Area

Heavy Duty: 6" and below

The KaMOS® Wrench with IR Anglehead, Type 105000 is designed to be used as a wrench and also on manually operated heavy duty valves. The tool is time, cost and safety efficient and valves that take several hours to operate manually will, by using the KaMOS® Patented Portable Valve Actuator take only 10% of the time.

* 6,2 bar (90 psi)

57

Extra items needed for use: 103102 Socket wrench for Drive Plate 101100, 60mm, 3/4" inside 103105

Adapter Connection 3/4" outside. - 1/2" inside

105000

To be used with KaMOS® Patented Drive Plate, Type 101100, 101110, 101115 and 101120. (Chapter 3.1.2)

3.2.10 Maintenance Kit for Air Engine Type

Description

106100

Grease Gun

106101

Bearing Grease

KaMOS® recommended regular maintenance of the air engine, and offer lubricator kit for the maintenance.

106101

106100

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


3.2.11 KaMOS® Mounting Bracket Extra equipment for KaMOS® Patented Portable Valve Actuator to assist and release when using tool in heights. SMALL

BIG

Type

104000 (7RLN) 104050 (9RSQ)

Mounting Bracket

104000-02

104050-02

Type 104050-02

3.2.12 KaMOS® Hand Sequrity for Gashandle 58

Extra equipment for KaMOS® Patented Portable Valve Actuator to to increase safety for operator. SMALL

BIG

Type

104000 (7RLN) 104050 (9RSQ)

Hand Sequrity

104000-03

104050-03 Type 104050-03

Safety First!

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


3.3 KaMOS® Protector Remover 3.3.1 KaMOS® Protector Remover Type 104000

The KaMOS® Protector Remover is designed for all types of protectors.  We do recommend when ordering  to order one protector remover (grip plate) for each dimension. The KaMOS® Grip Plate is made of carbon steel and the weight of the complete tool  is less than  8 kg. The tool is a hand held air driven actuator with speed control and direction control. Necessary safety protection is incorporated on the tool. The KaMOS® Protector remover is designed for all types of protectors and will save physical effort and time/cost savings. SMALL

BIG

Type

104000 (7RLN) 104050 (9RSQ)

Anglehead

102001

101001

Weight

6,5 kg

12 kg

Air need

780 l/min

1860 l/min

Operation pressure

4-7 bar

4-7 bar

Torque

120 Nm

480 Nm

Speed without load

136 o/min

75 o/min

59

Type 104000

Type 104050

3.3.2 KaMOS® Grip Plate The KaMOS® Grip plates are made on request for the specific dimension needed. Type 104100

104200

104300

Type 104200

Description KaMOS® Grip Plate with wheels are designed to grip around or inside the protector cap with it’s wheels. When speed is increasing the grip gets harder. KaMOS® Grip Plate with track and inner centre ring is designed to go on several dimensions. The grips are placed in the track of the protector cap. KaMOS® Grip Plate with track and centre ring at the outside is designed for the specific protector cap the tool is used on.

Type 104100

Type 104300

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


3.4 KaMOS® Storage Products 3.4.1 KaMOS® Storage Box, Type 103000

The KaMOS® Storage Box, Type 103000 is designed to store the KaMOS® Patented Portable Valve Actuators and also supply the tool with air hose and adjust the air for the tool. KaMOS® Storage Box contains 20 m Air hose on reel, filter lubricator and reduction valve. The 20 m Air hose will serve a good area of valves. KaMOS® recommends to use the KaMOS® Storage Box together with the KaMOS® Patented Portable Valve Actuators to lengthen the lifetime of the tools. Extra safety valve will be installed in the KaMOS® Storage Box on request.

60

Type

103000

Length

1170 mm

Width

500 mm

Height

710 mm

Weight (approx)

69 kg

Material

Aluminium 4 mm

Max. temperature

50 C°

Max. pressure

12 bar

Storing: (1) 103003*-13

Nederman Series 884 Hose Storage Incl. 20 m 1/2” Air hose

(2) 103016

Rexroth Series C15i

(3) 103002*-03

Claw coupling Air inlet 1/2”

1

2 The KaMOS Storage Box is designed to be stationary, but can also be provided on a trolley. (Chapter 3.4.2) ®

3

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


3.4.2 KaMOS® Trolley for Storage Box, Type 103005 The KaMOS® Storage Box can be delivered on a trolley, for easy transportation between the valves.

Type

103005

Platform dim.

700 x 1200 mm

Height of platform

260 mm

Total Height

1010 mm

Wheel dim.

200 x 50 mm

Weight

30 kg

Benefits by using KaMOS® Trolley for Storage Box:

•• Improves Safety •• Increase Efficiency •• Reduce Manpower

3.4.3 KaMOS® Actuator Trolley LB Type 103006 The KaMOS® Actuator Trolley LB is specially designed to store and transport the KaMOS® Patented Portable Valve Actuator, Type 101000 along with support equipment. Type

103006

Material

Carbon Steel, Stainless Steel and Aluminium

Height

112 cm

Width

42 cm

Depth

50 cm

Weight

30 kg

Wheels

10" x 3" pneumatic rubber

Storing: (1) 103003*-13

Nederman Series 884 Hose Storage Incl. 20 m 1/2” Air hose

(2) 103016

Rexroth Series C15i

(3) 103002*-03

Claw coupling Air inlet 1/2”

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.

61


3.4.4 KaMOS® Protection Box, Type 103200

To get a flexible and product saving use of the KaMOS® Patented Portable Valve Actuator in the field, KaMOS® are offering a protection box incl. lubricator & reduction valve type Rexroth Series C15, max. pressure 10 bar, max. temperature 50°C The KaMOS® Protection Box is equipped with lubricator & reductions valve, and are easy to mount in between two air hoses before the air is entering the tool. The box is also able to reduce the out-pressure to the tool and therefore also the torque. Type

103200

Size

L x W x H (115 x 270 x 320 mm)

Weight

4 kg

Material

Aluminium 4 mm

Storing

Rexroth filter/lubricator

Connector

106000-05, Jaw Clutch, offshore coupling w/1/2" male threads

62

3.4.5 KaMOS® Air Hose Reel Type 103008 To use the KaMOS® Patented Portable Valve Actuators an Air Hose is needed. KaMOS® is offering an effective Air Hose Reel incl. 20 m Air Hose to install stationary in the area where the tools are used. The Air Hose Reel has an automatic function to get the air hose back to the reel after use.

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


KaMOS has available stock at all times; ensuring deliveries can be made in the shortest possible time, to customers with time constraints. ®

– Karmsund Maritime Group

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.

63


64

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOSÂŽ PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


4

Conversion Tables and Factors 4.1 Various Conversion Factors Convert from

To

Multiply By

Inverse

PRESSURE

Convert from

To

pound-mass/

kilogram/meter (kg m )

1.601 846

E+01

6.242797

E-02

foot3

pound-mass/gallon

1.336805

E-01

7.480520

E-00

pound-mass/barrel

5614.583

E+00

1.781 076

E-01

Multiply By 3

-3

Inverse

atmosphere

pascal (Pa)

1.013 25

E+05

9.869 23

E-06

(normal-760

mm Hg (0°C)

7.600 000*

E+02

1.315 789

E-03

feet water (4°C)

3.389 95

E+01

2.949 90

E-02

pound-mass/

kilogram/meter3 (kg m-3)

1.198264

E+02

8.345406

E-03

psi

1.469 60

E+01

6.804 60

E-02

gallon

pound-mass/barrel

4.200000

E+01

2.380 952

E-02

bar

1.013 25

E+00

9.869 23

E-01

FORCE

pascal (Pa)

1.000 000*

E+05

newton (N)

1.000000*

E-05

1.000000*

E+05

pound-force

2.248089

E-06

4.448222

E+05

psi

1.450 377

E+01

6.894 757

E-02

kilogram-

newton (N)

9.806650*

E+00

1.019716

E-01

centimeter of

pascal (Pa)

1.332 22

E+03

7.500 64

E-04

force

pound-force

2.204622

E+00

4.535924

E-01

Hg (0°C)

psi

1.933 67

E-01

5.171 51

E+00

pound-force

newton (N)

4.448222

E+00

2.248089

E-01

mm Hg)

bar

dyne/

1.000 000*

1.000

E-05

dyne

LENGTH

pascal (Pa)

1.000 000*

E-01

angstrom

meter (m)

1.000000*

E-10

1.000000*

E+10

psi

1.450 377

E-05

6.894 757

E+04

centimeter

meter (m)

1.000000*

E-02

1.000000*

E+02

feet of water

pascal (Pa)

2.988 98

E+3

3.345 62

E-04

foot

meter (m)

3.048000*

E-01

3.280840

E+00

(4°C)

bar

4.355 15

E-01

2.306 73

E+00

centimeter

3.048000*

E+01

3.280840

E-02

meter (m)

2.540000*

E-02

3.937008

E+01

centimeter

2.540000*

E+00

3.937008

E-01

meter (m)

1.000000*

E-06

1.000000*

E+06

meter (m)

1.609344*

E+03

6.213712

E-04

foot

5.280000*

E+03

1.893939

E-04

centimeter2

000*

E+01

inch

psi kilogram-

pascal (Pa)

9.806 650*

E+04

1.019 716

E-05

force/

bar

9.806 650*

E-01

1.019 716

E+00

psi

1.422 334

E+01

7.030 695

E-02

psi

pascal (Pa)

6.894 757

E+03

1.450 377

E-04

mile (U.S.

ksi

pascal (Pa)

6.984 8

E+06

1.450

E-07

statue)

meter2 (m2)

4.046856

E+03

2.471 054

E-04

gram-mass

kilogram (kg)

1.000000*

E-03

1.000000*

E-03

foot

4.356000*

E+04

2.295684

E-05

ounce-mass

kilogram (kg)

2.834952

E-02

3.527397

E+01

(av)

gram

2.834952

E+01

3.527397

E-02

kilogram (kg)

4.5350237*

E-01

2.204623

E+00

ounce-mass

1.600000*

E+01

6.250000*

E-02

kilogram (kg)

1.459390

E+01

6.852178

E-02

centimeter2

MASS

AREA acre darcy

meter (m )

9.86923

E-13

1.01325

E+12

centimeter2 (cm2)

9.86923

E-09

1.01325

E+08

micrometer (µm)

9.869.23

E-01

1.01325

E+00

1.000000*

E+03

1.000000*

E-03

2

2

millidarcy cm • cp • sec • atm

1.000000*

E+00

1.000000*

E+00

meter2 (m2)

9.290304*

E-02

1.076391

E+01

centimeter

9.290304*

E+02

1.076391

E-03

inch

1.440000*

E+02

6.944444

E-03

meter2 (m2)

1.000000*

E+04

1.000000*

E-04

acre

2.471 054

E+00

4.046856

E-01

meter (m )

2.589988

E+06

3.861 022

E-07

acre

6.400000*

E+02

1.562500*

E-03

gram/

kilogram/meter3 (kg m-3)

1.000000*

E+03

1.000000*

E-03

centimeter3

pound-mass/foot3

6.242797

E+01

1.601 846

E-02

pound-mass/gallon

8.345405

E+00

1.198264

E-01

pound-mass/barrel

3.505070

E+02

2.853010

E-03

2

foot2

hectare mile

2

micron

-1

2

-1

2

pound-mass

slug

pound-mass

3.217405

E+01

3.108095

E-02

ton (U.S.

kilogram (kg)

9.071 847

E+02

1.102311

E-03

short)

pound-mass

2.000000*

E+03

5.000000*

E-04

ton (U.S.

kilogram (kg)

1.016047

E+03

9.842064

E-04

long)

pound-mass

2.240000*

E+03

4.464.286

E-04

ton (metric)

kilogram (kg)

1.000000*

E+03

1.000000*

E-03

tonne

kilogram (kg)

1.000000*

E+03

1.000000*

E-03

DENSITY

Temperature Scale Conversions * To convert degree Fahrenheit

To kelvin

Solve TK = (TF + 459.67)/1.8

degree Rankine

kelvin

TK = TR/1.8

degree Fahrenheit

degree Rankine

TR = TF + 459.67

degree Fahrenheit

degree Celsius

TC = (TF - 32)/1.8

degree Celsius

kelvin

TK = TC + 273.15

* The SI standard, the kelvin (K), is defined so the triple point of water is 273.16K exactly. The SI temperature symbol is written K without a degree symbol. The cgs (and common) temperature unit is the degree Celsius, °C: the common oilfield unit is the degree Fahrenheit, °F.

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.

65


4.2 Corrosion Resistant Chart

Corrosion Resistance:

1 - Good

Fluid

66

2 - Be Careful

3 - Not Useable

Metal Carbon Steel

Cast Iron

SS 302, SS 304

SS 316

Bronze

Durimet

Monel

Hasteloy B

Hasteloy C

Titanium

Cobalt base alloy 6

Acetaldehyde

1

1

1

1

1

1

1

na

1

na

na

1

Acetic acid, air free

3

3

2

2

2

1

2

1

1

1

1

3

SS 416

Acetic acid, aerated

3

3

1

1

1

1

1

1

1

1

1

3

Acetic acid, vapors

3

3

1

1

2

2

2

na

1

1

1

3

1

1

Acetone

1

1

1

1

Acetylene

1

1

1

1

Alcohols

1

1

1

1

1

1

1

1

1

1

1

1

1

1

na

1

1

1

1

1

1

1

1

1

Aluminum Sulfate

3

3

1

1

2

1

2

1

1

1

na

3

Ammonia

1

1

1

1

3

1

3

1

1

1

1

1

Ammonium chloride

3

3

2

2

2

1

2

1

1

1

2

3

Ammonium Nitrate

1

3

1

1

3

1

3

1

1

1

1

3

Ammonium Phosphate

4

3

1

1

2

2

2

1

1

1

1

2

Ammonium Sulfate

3

3

2

1

2

1

1

1

1

1

1

3

Ammonium Sulfite

3

3

1

1

3

1

3

na

1

1

1

2

Aniline

3

3

1

1

3

1

2

1

1

1

1

3

Asphalt

1

1

1

1

1

1

1

1

1

na

1

1

Beer

2

2

1

1

2

1

1

1

1

1

1

2

1

1

1 2

Benzene (benzol)

1

1

1

1

1

1

1

Benzoic acid

3

3

1

1

1

1

1

Boric acid

3

3

1

1

1

1

1

1

1

1

1

1

1

1

1 1

1

1

na

3 3

Butane

1

1

1

1

1

1

1

1

1

Calcium Chloride (alkaline)

2

2

3

2

3

1

1

1

1

1

Calcium hypochlorite

3

3

2

2

2

1

2

3

1

1

na

Carbolic acid

2

2

1

1

1

1

1

1

1

1

1

Carbon dioxide, dry

1

1

1

1

1

1

1

1

1

1

1

1

Carbon dioxide, wet

3

3

1

1

2

1

1

1

1

1

1

1

Carbon disulfide

1

1

1

1

3

1

2

1

1

1

1

2

Carbon tetrachloride

2

2

2

2

1

1

1

2

1

1

na

3

Carbonic acid

3

3

2

2

2

1

1

1

1

Chlorine gas

1

1

2

2

2

1

1

1

1

3

2

3

Chlorine gas, wet

3

3

3

3

3

3

3

3

2

1

2

3

1

Chlorine, liquid

3

3

3

3

2

2

3

3

1

3

2

3

Chromic acid

3

3

3

2

3

3

1

3

1

1

2

3 1

Citric acid Coke oven gas

1

3

2

1

1

1

2

1

1

1

1

1

1

2

1

2

1

1

1

1

2

Copper sulfate

3

3

2

2

2

1

3

na

1

1

na

1

Cottonseed oil

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Creosote

1

1

1

1

3

1

1

1

1

Ethane

1

1

1

1

1

1

1

1

1

Ether

2

2

1

1

1

1

1

1

1

1

1

1

Ethyl chloride

3

3

1

1

1

1

1

1

1

1

1

2 1

Ethylene

1

1

1

1

1

1

1

1

1

1

1

Ethylene glycol

1

1

1

1

1

1

1

na

na

na

1

1

Ferric chloride

3

3

3

3

3

3

3

3

2

1

2

3

Formaldehyde

2

Formic acid

2

1

1

1

1

1

1

1

1

1

1

3

2

2

1

1

1

1

1

3

2

3

Freon wet

2

2

2

1

1

1

1

1

1

1

1

na

Freon dry

2

2

1

1

1

1

1

1

1

1

1

na

Furfural

1

1

1

1

1

1

1

1

1

1

1

2

Gasoline

1

1

1

1

1

1

1

1

1

1

1

1

Glucose

1

1

1

1

1

1

1

1

1

1

1

1

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOSÂŽ PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


Corrosion Resistance: Fluid

1 - Good

2 - Be Careful

3 - Not Useable

Metal Carbon Steel

Cast Iron

SS 302, SS 304

SS 316

Bronze

Durimet

Monel

Hasteloy B

Hasteloy C

Titanium

Cobalt base alloy 6

SS 416

Hydrochloric acid, aerated

3

3

3

3

3

3

3

1

2

1/2

2

3

Hydrochloric acid, air free

3

3

3

3

3

3

3

1

2

1/2

2

3

Hydrofluoric acid, aerated

2

3

3

2

3

2

3

1

1

3

2

3

Hydrofluoric acid, air free

1

3

3

2

3

2

1

1

1

3

na

3

Hydrogen

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

3

1

3

2

2

1

na

2

Hydrogen peroxide Hydrogen sulfide, liquid

3

3

1

1

3

2

3

1

1

1

1

3

Magnesium Hydroxide

1

1

1

1

2

1

1

1

1

1

1

1

Mercury

1

1

1

1

3

1

2

1

1

1

1

1

Methanol

1

1

1

1

1

1

1

1

1

1

1

1

Methyl ethyl ketone

1

1

1

1

1

1

1

1

1

1

1

Milk

3

3

1

1

1

1

1

1

1

1

1

3

Natural gas

1

1

1

1

1

1

1

1

1

1

1

1

Nitric acid

3

3

1

2

3

1

3

3

2

1

3

3

Oleic acid

3

3

1

1

2

1

1

1

1

1

1

1

Oxalic acid

3

3

2

2

2

1

2

1

1

2

2

2

Oxygen

1

1

1

1

1

1

1

1

1

1

1

1

Petroleum oils

1

1

1

1

1

1

1

1

1

1

1

1

Phosphoric acid, aerated

3

3

1

1

3

1

3

1

1

2

1

3

Phosphoric acid, air free

3

3

1

1

3

1

2

1

1

2

1

3

Phosphoric acid vapors

3

3

2

2

3

1

3

1

2

3

3

Picric acid

3

3

1

1

3

1

3

1

1

na

na

2

Potassium chloride

2

2

1

1

2

1

2

1

1

1

na

3

Potassium hydroxide

2

2

1

1

2

1

1

1

1

1

na

2

Propane

1

1

1

1

1

1

1

1

1

1

1

1

Rosin

2

2

1

1

1

1

1

1

1

1

1

Silver Nitrate

3

3

1

1

3

1

3

1

1

1

2

2

Sodium acetate

1

1

2

1

1

1

1

1

1

1

1

1

Sodium carbonate

1

1

1

1

1

1

1

1

1

1

1

2

Sodium chloride

3

3

2

2

1

1

1

1

1

1

1

2

Sodium chromate

1

1

1

1

1

1

1

1

1

1

1

1

Sodium hydroxide

1

1

1

1

3

1

1

1

1

1

1

2

Sodium hypochloride

3

3

3

3

3

2

3

3

1

1

na

3

Sodium thiosulfate

3

3

1

1

3

1

3

1

1

1

na

2

Stannous chloride

2

2

3

1

3

1

2

1

1

1

na

3

Stearic acid

1

3

1

1

2

1

2

1

1

1

2

2

Sulfate liquor

1

1

1

1

3

1

1

1

1

1

1

Sulfur

1

1

1

1

3

1

1

1

1

1

1

1

Sulfur dioxide, dry

1

1

1

1

1

1

1

2

1

1

1

2

Sulfur trioxide, dry

1

1

1

1

1

1

1

2

1

1

1

2

Sulfuric acid, aerated

3

3

3

3

3

1

3

1

1

2

2

3

Sulfuric acid, air free

3

3

3

3

2

1

2

1

1

2

2

3

Sulfurous acid

3

3

2

2

2

1

3

1

1

1

2

3

Tar

1

1

1

1

1

1

1

1

1

1

1

1

Trichloroethylene

2

2

2

1

1

1

1

1

1

1

1

2

Turpentine

2

2

1

1

1

1

2

1

1

1

1

1

Vinegar

3

3

1

1

2

1

1

1

1

na

1

3

Water, steam boiler feeding system

2

3

1

1

3

1

1

1

1

1

1

2

Water, distilled

1

1

1

1

1

1

1

1

1

1

1

2

Water, sea

2

2

2

2

1

1

1

1

1

1

1

3

Whiskey

3

3

1

1

1

1

2

1

1

1

1

3

Wine

3

3

1

1

1

1

2

1

1

1

1

3

Zinc chloride

3

3

3

3

3

1

3

1

1

1

2

3

Zinc sulfate

3

3

1

1

2

1

1

1

1

1

1

2

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOSÂŽ PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.

67


4.3 Conversion Table

Nom. dia.

68

API 6A 3/600# PN50-100

900# PN150

1500# PN250

2500# PN420

-

R-11

R-12

R-12

R-13

-

R-13

R-14

R-14

R-16

ANSI

ISO

150# PN20

1/2"

15

3/4"

20

1"

25

R-15

R-16

R-16

R-16

R-18

1 1/4"

32

R-17

R-18

R-18

R-18

R-21

1 1/2"

40

R-19

R-20

R-20

R-20

R-23

2"

50

R-22

R-23

R-24

R-24

R-26

2 1/2"

65

R-25

R-26

R-27

R-27

R-28

3"

80

R-29

R-31

R-31

R-35

R-32

3 1/2"

100

R-33

R-34

R-34

-

-

4"

125

R-36

R-37

R-37

R-39

R-38

5"

150

R-40

R-41

R-41

R-44

R-42

6"

150

R-43

R-45

R-45

R-46

R-47

8"

200

R-48

R-49

R-49

R-50

R-51

10"

250

R-52

R-53

R-53

R-54

R-55

12"

300

R-56

R-57

R-57

R-58

R-60

14"

350

R-59

R-61

R-62

R-63

16"

400

R-64

R-65

R-66

R-67

18"

450

R-68

R-69

R-70

R-71

20"

500

R-72

R-73

R-74

R-75

22"

550

R-80

R-81

-

-

24"

600

R-76

R-77

R-78

R-79

26"

650

R-93

R-100

28"

700

R-94

R-101

30"

750

R-95

R-102

32"

800

R-96

R-103

34"

850

R-97

R-104

36"

900

R-98

R-105

Segmented Flanges for dual completion

Type 6B Flanges

Nom. Dia 2000#

3000#

5000#

5000#

1 3/8"

RX-201 RX-205

1 13/16" 2 1/16"

RX / R-23

RX / R-24

RX / R-24

RX-20

2 9/16"

RX / R-26

RX / R-27

RX / R-27

RX-210

3 1/8"

RX / R-31

RX / R-31

RX / R-35

RX-25

4 1/16"

RX / R-37

RX / R-37

RX / R-39

RX-215

5 1/8"

RX / R-41

RX / R-41

RX / R-44

7 1/16"

RX / R-45

RX / R-45

RX / R-46

9"

RX / R-49

RX / R-49

RX / R-50

11"

RX / R-53

RX / R-53

RX / R-54

13 5/8"

RX / R-57

RX / R-57

16 3/4"

RX / R-65

RX / R-66

21 1/4"

RX / R-73

RX / R-74

4 1/16" x 4 1/4"

RX-215

API 6A BX Nom. dia.

10000# 15000#

20000#

13/16"

BX-151

BX-151

BX-151

2 1/16"

BX-152

BX-152

BX-152

2 9/16"

BX-153

BX-153

BX-153

3 1/16"

BX-154

BX-154

BX-154

4 1/16"

BX-155

BX-155

BX-155

5 1/8"

BX-169

7 1/16"

BX-156

BX-156

BX-156

9"

BX-157

BX-157

BX-157

11"

BX-158

BX-158

BX-158

BX-159

BX-159

1

ASME B16.20/16.47A

2000#

3000#

5000#

13 5/8"

BX-160

BX-159

16 3/4"

BX-162

BX-162

18 3/4"

BX-163

BX-164

21 1/4"

BX-165

BX-166

26 3/4"

BX-167 BX-168

30"

BX-303 BX-303

BX-164

Maximum hardness Material

Wekstoff Number

Brinell* [BHN]

Rockwell B+[HRB]

Soft Iron

90

56

Vickers [HV]

Identifcation

Low Carbon Steel

120

68

S

4-6% Chrome 1/2% Moly

130

72

F5

D

Type 304 Stainless Steel

1.4301

160

83

S304

Type 316 Stainless Steel

1.4401

160

83

S316

Type 316L Stainless Steel

S316L

Type 347 Stainless Steel

1.4550

160

83

S347

Type 410 Stainless Steel

1.4006

170

86

S410

Type 825 Inconell

160

Type 625 Inconell

190

*Measured with 3000 kg load except soft iron which is measured with 500 kg load +Measured with 100 kg load and 1/16 inch diameter ball

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


4.4 Hardness Conversion Table

Applies for plain and low-alloy steels and cast steel and to a limited extent for high-alloy and/or work hardened steel. Tensite Strength

Brinell

Vickers

Rockwell B+

Rockwell

[N/mm2]

[BHN]

[HV]

[HRB]

[HRC]

285

86

90

320

95

100

56.2

350

105

110

62.3

385

114

120

66.7

415

124

130

71.2

450

133

140

75.0

480

143

150

78.7

510

152

160

81.7

545

162

170

85.0

575

171

180

87.1

610

181

190

89.5

640

190

200

91.5

675

199

210

93.5

705

209

220

95.0

740

219

230

96.7

770

228

240

98.1

800

238

250

99.5

820

242

255

23.1

850

252

265

24.8

880

261

275

26.4

900

266

280

27.1

930

276

290

28.5

950

280

295

29.2

995

295

310

31.0

1030

304

320

32.2

1060

314

330

33.3

1095

323

340

34.4

1125

333

350

35.5

1155

342

360

36.6

1190

352

370

37.7

1220

361

380

38.8

1255

371

390

39.8

1290

380

400

40.8

1320

390

410

41.8

1350

399

420

42.7

1385

409

430

43.6

1420

418

440

44.5

1455

428

450

45.3

1485

437

460

46.1

1520

447

470

46.9

1555

456

480

47.7

1595

466

490

48.4

1630

475

500

49.1

1665

485

510

49.8

1700

494

520

50.5

1740

504

530

51.1

1775

513

540

51.7

1810

523

550

52.3

1845

532

560

53.0

1880

542

570

53.6

1920

551

580

54.1

1955

561

590

54.7

1995

570

600

55.2

2030

580

610

55.7

2070

589

620

56.3

2105

599

630

56.8

2145

608

640

57.3

2180

618

650

57.8

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOSÂŽ PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.

69


4.5 Steel Conversions

ASME(ASTM) Section Forgings Carbon steel for piping components

Seamless carbon steel pipe for hightemperature service

Spec. SA-105

SA-106

DIN

Symbol

D3710

SF 50

G 3201

SF 50

D3710

SF 50

G 3201

SF 50PV

D3710

SF 45

G 3201

SF 45

SF 30C

G 40511

SF 30C

D3752

SF 25C

G 4051

SF 25C

D 3564

SPPH 38

G 3455

STS38

DIN 1629 St 35.4

D 3570

SPHT 38-S

G 3456

STPT 38-S

DIN 17175 St 35.8

D 3564

SPPH 42

G 3455

STS 42

DIN 1629 St 45.4

D 3570

SPHT 42-S

G 3456

STPT 42-S

DIN 17175 St 45.8

D 3564

SPPH 49

G 3455

STS 49

DIN 1629 St 52.4 SEW 610-17Mn4 SEW 610-19Mn5

D 3570

SPHT 49-S

G 3456

STPT 49-S

DIN 17175 St 45.8 SEW 610-17Mn4 SEW 610-19Mn5

F1

D 4110

SFHV 12B

G 3213

SFHV 12B

SEW 550 22Mo4

F2

D 4110

SFHV 13B

G 3213

SFHV 13S

SEW 620 12CrMo44 SEW 620 13CrMo44

F5

D 4110

SFHV 25

G 3213

SFHV 25

VaTUVWb1.1207-12CrMo19

F9

D 4110

STS 26B

G 3213

SFHV 26B

Wat-Nr1.7388-12CrMo91

F 11

D 4110

STS 23B

G 3213

SFHV 23B

SEW 810-12CrMo44

F 12

D 4110

STS 22B

G 3213

SFHV 22B

F 22

D 4110

STS 24B

G 3213

SFHV 24B

SEW 810-10CrMo910

F 304

D 3214

STS 304

G 3214

SUSF 804

SEW 880-5CrMo1810 SEW 17440-2CrMo1812

Gr. A Gr. B

SA-182

JIS ST'D Number

Symbol

D3752

Gr. C

Forged or rolled steel pipe flanges, Forged fittings, and valves and parts for hightemperature service.

KS ST'D Number

Grade

SEW 620 15Mo3

70

SEW 810-13CrMo44 SEW 810-12CrMo44 SEW 810-13CrMo44

F 304H

D 3214

STS 304H

G3214

SUSF 804H

F 304L

D 3214

STS 304L

G 3214

SUSF 804L

F 310

D 3214

STS 301

G 3214

SUSF 810

F 316

D 3214

STS 316

G 3214

SUSF 816

DIN 17440-2CrNi189 DIN 17440-5CrNiMo1810 DIN 17440-5CrNiMo1812

F 316H

D 3214

STS 2316H

G 3214

SUSF 816H

F 316L

D 3214

STS 316L

G 3214

SUSF 816L

F 321

D 3214

STS 321

G 3214

SUSF 821

F 321H

D 3214

STS 321H

G 3214

SUSF 821H

F 347H

D 3214

STS 347

G 3214

SUSF 847

F 347H

D 3214

STS 347H

G 3214

SUSF 847H SEW 870-8CrNiMo1518

DIN 17440-2CrNiMo1810 DIN 17440-2CrNiMo1812 DIN 17440-10CrNiMo189 SEW 680-10CrNiMo1810 DIN 17740-10CrNiMo189 SEW 680-10CrNiMo1810

Alloy-steel and stainless steel bolting materials for hightemperature service

SA-193

Carbon and alloy steel nuts for high pressure and high temperature

SA-194

Gr. B5

D 3755

SNB 5

G 4107

SNB 5

Gr. B7

D 3755

SNB 7

G 4107

SNB 7

DIN 17240-24CrMo5

Gr. B16

D 3755

SNB 16

G 4107

SNB 16

DIN 17240-21CrMoV55

Gr. 2H

D 3752

SM 45C

G 4051

S 45C

DIN 17100 St 50-2

Gr. 3

D 3755

SNB 5

G 4107

SNB 5

-

Gr. 4

-

-

-

-

DIN 17240-24 CrMo5

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


ASME(ASTM) Section Carbon steel castings suitable for fusion welding for hightemperature service

Spec.

Grade

SA-216

Gr. WCA

KS ST'D Number

JIS Symbol

ST'D Number

DIN

Symbol

D 4101

SC 42

G 5101

SC 42

D 4106

SCW 42

G 5102

SCW 42

DIN 1681 GS-38 DIN 1681 GS-38.5

D 4107

SCPH 1

G 5151

SCPH 1

DIN 1681 GS-38 DIN 1681 GS-45 DIN 17245 GS-C25

Gr. WCB

D 4101

SC 49

G 5101

SC 42

DIN 1681 GS-52

D 4106

SCW 49

G 5102

SCW 49

DIN 1681 GS-45.3

D 4107

SCPH 2

G 5151

SCPH 2

DIN 1681 GS-52 DIN 17245 GS-C25

Gr. WCC

D 4106

SCW 49

G 5102

SCW 49

DIN 1681 GS-45.3

D 4107

SCPH 2

G 5151

SCPH 2

DIN 1681 GS-52

D 4107

SCPH 11

G 5151

SCPH 11

DIN 17245 GS-22Mo4

DIN 17245 GS-C25 Martensitic stainless steel and alloy steel casting for pressure containing parts suitable for hightemperature service

SA-217

Gr. WC1 Gr. WC6

D 4107

SCPH 21

G 5151

SCPH 21

DIN 17245 GS-17CrMo55

Gr. WC9

D 4107

SCPH 32

G 5151

SCPH 32

SEW 595 GS-12CrMo910

Gr. C5

D 4107

SCPH 61

G 5151

SCPH 61

SEW 595 GS-12CrMo195 SEW 595 GS-12CrMo101

Gr. C12

D 4107

SCPH 61

G 5151

SCPH 61

SEW 595 GS-12CrMo195 SEW 595 GS-12CrMo101

Chromium and chromium-nickel stainless steel plate, sheet, and strip for fusion-welded unfired pressure vessels.

SA-240

Type 302

D 3705

STS 302

G 4304

SUS 302

Type 304

D 3705

STS 304

G 4304

SUS 304

SEW 680 5CrNi 1810

Type 304L

D 3705

STS 304L

G 4304

SUS 304L

DIN 17440 2CrNi 189

Type 309S

D 3705

STS 309S

G 4304

SUS 309S

Type 310S

D 3705

STS 310S

G 4304

SUS 310S

Type 316

D 3705

STS 316

G 4304

SUS 316

DIN 17440 5CrNi 189

DIN 17440 5CrNiMo1812 DIN 17440 5CrNiMo1810

Type 316L

D 3705

STS 316L

G 4304

SUS 316L

Type 321

D 3705

STS 321

G 4304

SUS 321

DIN 17440 7CrNiMo1812 DIN 17440 7CrNiMo1810 DIN 17440 10CrNiTi1810 SEW 880 10CrNiTi1810

Low and intermediatetensile strength carbon steel plates of structural

SA-283

Low and intermediatetensile strength carbon steel plates for pressure vessels

SA-285

Cow carbon steel externally and internally threaded standard fasteners

SA-307

Type 347

D 3705

STS 347

G 4304

SUS 347

DIN 17440 10CrNiTi189

Type 405

D 3705

STS 405

G 4304

SUS 405

DIN 17440 7CrAl 13

Type 410

D 3705

STS 410

G 4304

SUS 410

DIN 17440 10Cr 13

Type 429

D 3705

STS 429

G 4304

SUS 429

-

Type 430

D 3705

STS 430

G 4304

SUS 430

DIN 17440 8Cr 17

Gr. C

D 3503

SB 41

G 3101

SS 41

DIN 17100 USt 37-1

Gr. D

D 3503

SB 41

G 3101

SS 41

DIN 17100 USt 42-1

Gr. B

D 3560

SBB 35

G 3103

SB 35

Gr. C

D 3560

SBB 42

G 3103

SB 42

DIN 17155 H11

Gr. B

D 3503

SM 42

G 3101

SS 41

(B) DIN 267 B1. 3-4. 6

D 3752

SM 25C

G 4051

S 25C

(B) DIN 267 B1. 35-6

(N) DIN 257 B1. 4-5 DIN 17240 C 35, CK35 (N) DIN 267 B1. 45 DIN 17100 St 50-2

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.

71


ASME(ASTM) Section Seamless and welded austenitic stainless steel pipe

Spec. SA-312

KS ST'D Number

Grade Gr. TP 304

D 3576

JIS ST'D Number

Symbol STS 304TP

G 3459

DIN

Symbol SUS 304TP

DIN 2462 5CrNi 18 9 SEW 680 5CrNi 18 10

Gr. TP 304H

D 3576

STS 304HTP

G 3459

Gr. TP 304L

D 3576

STS 304LTP

G 3459

SUS 304HTP SUS 304LTP

Gr. TP 309

D 3576

STS 309TP

G 3459

SUS 309TP

DIN 2463 2CrNi 18 9

Gr. TP 310

D 3576

STS 310STP

G 3459

SUS 310STP

Gr. TP 316

D 3576

STS 310STP

G 3459

SUS 316TP

Gr. TP 316H

D 3576

STS 316TP

G 3459

SUS 316HTP

Gr. TP 316L

D 3576

STS 316HTP

G 3459

SUS 316LTP

DIN 2462 2CrNiMo 18 10

Gr. TP 321

D 3576

STS 321TP

G 3459

SUS 321TP

SEW 680 10CrNiTi 18 10

Gr. TP 321H

D 3576

STS 321HTP

G 3459

SUS 321HTP

Gr. TP 347

D 3576

STS 347TP

G 3459

SUS 347TP

Gr. TP 347H

D 3576

STS 347HTP

G 3459

SUS 347HTP DIN 2462 10CrNiNb 13 9

DIN 2462 5CrNiMo 18 10 DIN 2462 5CrNiMo 18 12

DIN 2462 2 CrNiMo 18 12 DIN 2462 10CrNiTi 18 9 DIN 2462 10CrNiNb 13 10 SEW 680 10CrNiNb 18 9 SEW 670 3CrNiNb 16 13 Alloy steel bolting materials for lowtemperature service

SA-320

72 High-strength bolts for structural steel joints, incl. suitable nuts and plain hardened washers

SA-325

Austenitic steel castings for high-temperature service

SA-351

Gr. B8

D 3706

STS 304B

G 4303

DIN 267 A2 SEW 650 5CrNi 18 10

SUS 304B

Gr. B8C

D 3706

STS 347B

G 4303

SUS 347B

SEW 680 10CrNiNb 18 10

Gr. B8M

D 3706

STS 316B

G 4303

SUS 316B

DIN 267 A4

Gr. B8T

D 3706

STS 321B

G 4303

SUS 321B

SEW 680 10CrNiTi 18 10

Type 1

D 3752

SM 35C

G 4051

S 35C

(B) DIN 267 Bi 35.6 DIN 17240 C45 DIN 17240 CK 45 (N) DIN 17100 St

Gr. CF3

D 4103

SSC 19,-CF

G 5121

SCS 19,-CF

DIN 1591 GG-15

Gr. CF3M

D 4103

SSC 15,-CF

G 5121

SCS 15,-CF

Gr. CF8

D 4103

SSC 13,-CF

G 5121

SCS 13,-CF

SEW 595-70G 8CrNi 18 10

Gr. CF8C

D 4103

SSC 21,-CF

G 5121

SCS 21,-CF

SEW 595-70G 8CrNiMo 18 10

Gr. 12Cl. 2

-

-

G 4109

SCMV2NT

DIN 17155 13CrMo44

DIN 17445G 6CrMo 18 9 DIN 17445G 6CrMoNi 18 18

carbon steel plates for pressure vessels for intermediate and highertemperature service

SA-515

phosphor bronze plate, sheet, strip, and rolled bar

SB-103

Gr. 12Cl.1

-

-

G 4109

SCMV5A

VdTUVWb1.1207-12CrMo19 5

Gr. 21Cl. 2

-

-

G 4109

SCMV5NT

VdTUVWb1.1207-12CrMo19 5

Gr. 22Cl. 1

-

-

G 4109

SCMV4A

VdTUVWb1130-12CrMo9 10

Gr. 22Cl. 2

-

-

G 4109

SCMV4NT

VdTUVWb1.110-12CrMo9 10

Gr. 55

D 3560

SBB 35

G 3103

SBB 35

DIN 17155 H11

Gr. 60

D 3560

SBB 42

G 3103

SBB 42

DIN 17155 H11

Gr. 65

D 3560

SBB 46

G 3103

SBB 46

DIN 17155 H111, 17Mn4

Gr. 70

D 3560

SBB 49

G 3103

SBB 49

DIN 17155 19Mn5,

C 51000

D 5506

PBS1/PBT1

H 3110

C 5101P

-

D 5506

PBS1/PBT1

H 3110

C 5101R

-

C 52100

D 5506

PBS3/PBT3

H 3110

C 5212P

DIN 17662-CuSn8

D 5506

PBS3/PBT3

H 3110

C 5212R

DIN 17662-CuSn8

VdTUVWb 1.373 WB23

DIN 17670-CuSn8 DIN 17670-CuSn8

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


4.6 Technical Information RTJ Gasket – Model R ASME B16.20 Specification Dimensional Data GENERAL NOTES: a) All dimensions are in millimeters. P A B, H 23 deg

b) Tolerances:

= = = =

average pitch diameter of ring, ±0.18 width of ring, ±0.20 height of ring, + 1.3, -0.5 angle, ±0 deg 30 min

NOTES: End flanges to API 6D and API 600 use ring joints for equivalent pipe size under ASME/ANSI B16.5 or ASME B16.47 series A.

Table for Standard RTJ Gaskets Pressure Class Ratings Ring no.

ASME/ANSI B16.5 150

300/600

900

1500

ASME B16.47 Series A

API 6A 2500

2000

3000

5000

150

300/600 900

Pitch dia. Width of of ring ring P

Nominal Pipe sizes (inches) R11 R12 R13 R14 R15 R16 R17 R18 R19 R20 R21 R22 R23 R24 R25 R26 R27 R28 R29 R30 R31 R32 R33 R34 R35 R36 R37 R38 R39 R40 R41 R42 R43

1/2 1/2

1/2

3/4

3/4

1

1

3/4

1 1 1/4 1 1/2 2 2 1/2

3

3 1/2 4

5 6

1

1/2

1 1/4 1 1/4 1 1/4 1 1/2 1 1/2 1 1/2 2 2 1/2

3 3

2 2

1/2

2

1 1/4 1 1/2 2 2 1/2

3

2 1/16 2 1/16 2 1/16

4

5

2

2 9/16 2 9/16 2 9/16 2 9/16

3 1/8

3 1/8

3

4 5

1

1/2

3

3 1/2 4

2

3/4

3 1/8 4

5

4 1/16 4 1/16 4 1/16

34.13 39.69 42.86 44.45 47.63 50.80 57.15 60.33 65.09 68.28 72.23 82.55 82.55 95.25 101.60 101.60 107.95 111.13 114.30 117.48 123.83 127.00 131.76 131.76 136.53 149.23 149.23 157.16 161.93 171.45 180.98 190.50 193.68

A

Height of Ring Oval

Oct.

Approx distance between made up flanges

B

H

b

Dimensions in millimeters 6.35 11.20 9.70 7.95 14.20 12.70 7.95 14.20 12.70 7.95 14.20 12.70 7.95 14.20 12.70 7.95 14.20 12.70 7.95 14.20 12.70 7.95 14.20 12.70 7.95 14.20 12.70 7.95 14.20 12.70 11.13 17.50 16.00 7.95 14.20 12.70 11.13 17.50 16.00 11.13 17.50 16.00 7.95 14.20 12.70 11.13 17.50 16.00 11.13 17.50 16.00 12.70 19.10 17.50 7.95 14.20 12.70 11.13 17.50 16.00 11.13 17.50 16.00 12.70 19.10 17.50 7.95 14.20 12.70 11.13 17.50 16.00 11.13 17.50 16.00 7.95 14.20 12.70 11.13 17.50 16.00 15.88 22.40 20.60 11.13 17.50 16.00 7.95 14.20 12.70 11.13 17.50 16.00 19.05 25.40 23.90 7.95 14.20 12.70

4.1 4.8 4.8 4.8 4.8

4.8

4.8 4.8 4.8 4.8

Approx weight Kg

Oval 0.06 0.10 0.10 0.12 0.22 0.14 0.16 0.16 0.26 0.18 0.27 0.30 0.86 0.42 0.35 0.44 0.46 0.70 0.30 0.40 0.52 0.68 0.33 0.56 0.60 0.34 0.64 1.16 0.70 0.43 0.81 0.81 1.00

Oct. 0.06 0.10 0.10 0.12 0.12 0.14 0.25 0.16 0.18 0.18 0.20 0.21 0.36 0.40 0.42 0.44 0.46 0.74 0.30 0.42 0.54 0.64 0.30 0.54 0.58 0.38 0.64 1.16 0.68 0.74 0.84 1.91 0.50

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.

73


Pressure Class Ratings Ring no.

74

R44 R45 R46 R47 R48 R49 R50 R51 R52 R53 R54 R55 R56 R57 R58 R59 R60 R61 R62 R63 R64 R65 R66 R67 R68 R69 R70 R71 R72 R73 R74 R75 R76 R77 R78 R79 R80 R81 R82 R84 R85 R86 R87 R88 R89 R90 R91 R92 R93 R94 R95 R96 R97 R98 R99 R100 R101 R102 R103 R104 R105

ASME/ANSI B16.5 150

8

10

12

300/600

900

6

6

8

8

10

12

10

12

14 14 16

18

20

24

16

18

20

24

1500

ASME B16.47 Series A

API 6A 2500

2000

3000

5000

150

300/600 900

Nominal Pipe sizes (inches) 5 7 1/16 7 1/16 6 7 1/16 6 8

10

9

9

11

11

8

10

9

11

13 5/8 13 5/8

12 12

14

16

18

20

24

14 16 3/4 16

16

18

18 21 3/4 20

20 3/4

24 22 22

26 28 30 32 34 36 26 28 30 32 34 36

Pitch dia. Width of of ring ring P

A

Height of Ring Oval

Oct.

Approx distance between made up flanges

B

H

b

Dimensions in millimeters 193.68 11.13 17.50 16.00 211.15 11.13 17.50 16.00 211.15 12.70 19.10 17.50 228.60 19.05 25.40 23.90 247.65 7.95 14.20 12.70 269.88 11.13 17.50 16.00 269.88 15.88 22.40 20.60 279.40 22.23 28.70 26.90 304.80 7.95 14.20 12.70 323.85 11.13 17.50 16.00 323.85 15.88 22.40 20.60 342.90 28.58 36.60 35.10 381,00 7,95 14,20 12,70 381,00 11,13 17,50 16.00 381,00 22,23 28,70 26,90 396,88 7,95 14,20 12,70 406,40 31,75 39,60 38,10 419,10 11,13 17,50 16.00 419,10 15,88 22,40 20,60 419,10 25,40 33,30 31,80 454,03 7,95 14,20 12,70 469,90 11,13 17,50 16.00 469,90 15,88 22,40 20,60 469,90 28,58 36,60 35,10 517,53 7,95 14,20 12,70 533,40 11,13 17,50 16.00 533,40 19,05 25,40 23,90 533,40 28,58 36,60 35,10 558,80 7,95 14,20 12,70 584,20 12,70 19,10 17,50 584,20 19,05 25,40 23,90 584,20 31,76 39,60 38,10 673,10 7,95 14,20 12,70 692,15 15,88 22,40 20,60 692,15 25,40 33,30 31,80 692,15 34,93 44,50 41,40 615,95 7,95 12,70 635,00 14,29 19,10 57,14 11,13 16.00 63,50 11,13 16.00 79,38 12,70 17,50 90,50 15,88 20,60 100,03 15,88 20,60 122,83 19,05 23,90 114,30 19,05 23,90 155,58 22,23 26,90 260,25 31,75 38,10 228,60 11,13 17,50 16.00 749,30 19,05 23,09 800,10 19,05 23,09 857,25 19,05 23,09 914,40 22,23 26,90 965,20 22,23 26,90 1019,18 22,23 26,90 234,95 11,13 16.00 749,30 28,58 35,10 800,10 31,75 38,10 857,25 31,75 38,10 914,40 31,75 38,10 965,20 34,93 41,40 1022,35 34,93 41,40

4.8 4.8 4.8 4.1 4.8 4.1 4.8 4.1 4,8

5,6 4,8 4,1 4,8 4,8 3,3 4,8

4,8 4,8 3,3 4,1 4,1 4,8 4,8 4,8 4,1

4,8

Approx weight Kg

Oval 0.86 0.92 1.12 2.36 1.40 1.18 2.08 3.84 0.85 1.40 2.48 7.50 1.04 1.66 5.14 0.99 10.74 1.78 3.18 7.54 1.22 2.04 3.64 10.36 1.30 2.30 5.54 12.10 1.40 4.03 5.98 15.30 1.72 5.28 11.68 23.10 4.10 1.20

7.63 8.10 10.30 12.16 13.10 16.80 17.00 20.97 23.00 24.00 31.24 33.10

Oct. 0.84 0.88 1.10 2.32 0.60 1.14 2.02 3.78 0.80 1.36 2.42 7.86 1.10 1.58 5.10 1.30 12.44 1.76 3.62 7.62 1.32 1.98 3.44 10.84 1.19 3.20 5.64 15.92 1.35 2.98 5.90 16.22 1.63 5.12 12.60 27.40 1.69 4.10 0.23 0.26 0.44 0.66 0.72 1.24 1.15 2.06 6.83 0.92 8.00 8.10 8.72 12.29 12.86 16.10 0.95 17.02 22.129 23.62 25.32 32.05 36.00

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOSÂŽ PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


We now serve 639 faithful customers in 71 countries in a time, cost and safety efficient way. â&#x20AC;&#x201C; Karmsund Maritime Group

Specifications and images are subject to change without notice. Karmsund Maritime Group as is not responsible for typgraphical errors. 2014 - 1 // KaMOSÂŽ PRODUCTS - Karmsund Maritime Offshore Supply as. All rights reserved.


76

The Karmsund products have been in the market since 1989 - and are now used worldwide.

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOSÂŽ PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


Karmsund Maritime Group References - a Selection

5

77

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOSÂŽ PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


A SELECTION: * ** ***

78

KaMOS Portable Valve Actuator KaMOS RTJ gasket KaMOS Kammprofil gasket Used subsea

ANGOLA * ExxonMobil / Hyundai Heavy Industries Ltd. ** Total E&P Angola ARGENTINA * Ackron S.A * Total Austral S.A AUSTRALIA A.J. Lucas Testing Pty. Ltd IMEX parts & Equipment Pty Ltd * Keamy Engineering Astraulia Tty. Ltd. * Novus Sealing Pty Ltd * Tamboritha Consultants Pte Ltd *** Technip Subsea 7 Asia Pacific Pty Ltd TRINKOR Pty Ltd *** Saipem **/*** Woodside Energy Ltd Woodside Offshore Petroleum AZERBAIJAN Azerbaijan Int. Operating Co. Bakond TTM BP Group * BJ Services Company Middle East MST Ltd BRAZIL Petrobras BRUNEI ** Swiber Offshore Construction Pte * Total E&P Borneo BURMA Premium Petroleum Myanmar Ltd. CANADA AMEC Black & McDonald Ltd. Canadian Petro int. * CFF */** CNR International */** Hydraulic Systems Ltd Petro Canada * Piping Component Specialities */** Husky Oil Operations Limited Suncor Energy Vetco Gray Canada Inc. CONGO * Friedlander Groupe Ortec */** Total E&P Congo CROATIA */** Saipem S.p.A DENMARK /* ** AP Møller Dril- Quip (Europe) Ltd. Hess Denmark AS Hytor as Mærsk Olie og Gas AS Score Danmark Semco Maritime A/S Statoil AS, Danmark Valtor Offshore AS EGYPT /* Belayim Petroleum Company */**/*** Burullus Gas Company (Technip France) ** Enppi - Eng. for the petroleum and process ind. ** GUPCO - Gulf of suez petroleum company * Micoperi S.r.l /* Pharaonic Petroleum Company S.A.E * Saipem MISR */** Saipem UK (Sonsub Division) FRANCE * 2L Distribution /* Acergy West Africa Berhelot SAS Doris Engineering ERFI France Flow Control Technologies

* Friedlander Groupe Ortec Logitrade SAS */** Ponticelli Frères Shell France */ *** Technip France GERMANY Deutsche BP Miro Wilhelm Feldmann, Druckluft Hydaulik GmbH&Co. HONG KONG * Offtech International Limited INDIA Enron Oil & Gas Ltd. */*** Leighton Contractorss PVT Ltd Terra Consultant IRAN * E.N.I. SAIPEM/Hyundai Eng. & Constr. Co., Ltd. */** Pars Mosamam Middle East Eng. Co. Ltd * Petrofac Pars */*** Tavan Gashta Int’l (TGI) TOTAL IRELAND Aughinish Alumina Ltd. INDONESIA */** BP Indonesia */** CAPE Resources Indonesia, P.T. */*** J Ray McDermott **/*** Kaliraia Sari P.T ** P.T Distributor Komponen Utama * PT. Gunanusa * PT Miltra Galperti */*** PT. Mitra PFP Utama * PT Nippon Steel Construction Indonesia * PT Offshore Services Indonesia */*** PT. Techip Indonesia */*** PT. Petrosea TBK * Secular Engineering & Construction Pte Ltd * Timas Suplindo, P.T */** Total E&P Indonesia ITALY * Breda Energia S.p.A Cam Engineered Valves Voghera Cam Flow Control - Voghera Dresser Italia S.r.l G.P.A. SPA * Micoperi S.r.l PERAR A.p.A/ T.R.P. S.r.l. Petrol Valves Srl. Piemme Broker Rotork Gears s.r.l */** Saipem S.p.A Valvitalia S.p.A ** Viar Piping Srl KAZAKHSTAN * Karachaganak Petroleum Operating B.V. KOREA */** Hyundai Heavy Ind. Ltd. LG Engineering & Construction Dong- A * Samsung Heavy Industries Co Ltd. KUWAIT Hyundai Engineering & Construction Co., Ltd * Hyundai Heavy Industries, Ltd MALAYSIA *** Agenda Suria SDN BHD *** Binary Trading SDN BHD */*** Construction And Piling Equipment Sdn Bhd */*** Crosscom Sdn Bhd * Cape Group Pte Ltd * Custom Industrial Suppliers Sdn Bhd * Dexcel SDN BHD * Global Offshore Malaysia Sdn Bhd */*** J Ray McDermott * Swiber Offshore Marine MEXICO Diamond Offshore Co. * Tallares Navales del Golfo, S.A. De C.V. MYANMAR Total E&P Myanmar NIGERIA Felpet Nigeria Ltd

Hermes Oil and Gas Ltd Total Upstream Nigeria Limited NORWAY ABB Service * Acergy Norway AS /* Advanced Production and Loading AS Aibel Haugesund Aker Maritime Aker Stord AS, Melkøya AS Maskin Bjørge Offshore /*/** BP Norge AS * Cam Surface SYS - Bergen * Cameron Norge AS * Cecon ASA /*/** ConocoPhillips Petroleum Company UK ConocoPhillips Skandinavia AS /*/** ConocoPhillips UK Limited ED Trading AS Elf Petroleum Norge AS EnerMech AS Esso Norge AS ExxonMobil Exploration and Production * FMC Kongsberg Subsea AS Golar- Nor Offshore Halliburton (Norway) Inc. Hydro Agri Porsgrunn Hydro Polymers AS, Rafnes Hymaco Mask. Service Ineos Norge AS, Rafnes /* Industrikonsult AS John Dahle AS * Kongsberg Offshore AS ** Krentak A/S Kværner Installasjon Linde Engineering Maskinconsult Maskinforetningen THV. Christensen AS Maskin K. Lund, Oslo Mento AS Mærsk Contractors Norge AS Mærsk Drilling Norge AS National Oilwell Varco Naturkraft AS NLI Asker Subsea Norsk Hydro Produksjon Noretyl AS Oddfjell Offshore * Oceaneering AS PGS Phillips Petroleum Co. */ *** Plugging Specialists int. AS Procon Drilling Service Progress AS Rogaland Jernvare AS Saipem S.P.A. Saga Petroleum ASA */** Score AS * Score Norway AS Seawell Norge AS (Seadrill Offshore AS) */** SFF A/S * Skude Industri Smedvig Offshore AS /* Statoil Petroleum AS Stavanger Maskin & Verktøylager * Subsea 7 Talisman Energy Tess Møre AS /* Tess Vest AS Tools AS Maskin Versanor AS Vestec AS, Randaberg VM- Alliansen II DA (Sørco) OMAN Oman LNG LLC, Sultanata of Oman PHILLIPPINES * Cape Group Pte Ltd * GALOC Production Company *** Rubicon Offshore Shell Phillippines PORTUGAL Saipem (Portugal)

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


QATAR

Comercio Maritimo LDA

Doha Motors & Tranding Co. Dolphin Energy Ltd National Oil Distr. Co. * Qatar Engg.& Constr. Co. WLL (QCON) Qatar Liquified Gas Co. Ltd RasGas Company Limited Salam Petroleum Services ROMANIA Grup Servicii SA RUSSIA Sakhalin Energy Investment Company LTD. SAUDI ARABIA Al Abdulkarim Holding Company Al- Gubil Petro Chemical Co. Saudi Arabia * MMG SINGAPORE * Beta South East Asia Pte Ltd */**/*** CAPE Group Pte Ltd */** Construction and Piling equip. Ltd. Pte. Econosto Singapore Pte Ltd * */** Franklin Offshore International Pte. FWP (Forster Wheeler/WorleyParson JV) */*** Global Industries Asia Pacific Pte Ltd Goltens Trading & eng. PTE Ltd. JW Macs pte ltd * Nippon Steel Engineering Co.,Ltd */*** Prosafe * PT Mitra Galperti Rubicon Offshore International Pte., Ltd * Sembawang Marine & Offshore Eng. ** Total SOUTH AFRICA Zy-Tech Valvestock Africa (PTY) Ltd SPAIN Saipem S.P.A Sucursal en Espana * SWEDEN Preem AB SWITZERLAND * Allseas Engineering BV * Allseas Marine Contractors SA Protrack Shipping Ltd Single Buoy Moorings Ind. TAIWAN Triplex Engineering & Trade Co.Ltd THAILAND Amerada Hess Limited /*/** Cape Industrial Co., Ltd. Chevron Thailand Exploration and Production * Chevron Offshore Thailand Clough Thailand * * Construction and Piling Equip. Ltd /*/** CUEL Limited * CUEL SWIBER Pearl Oil Thailand Ltd. * PTTEP- Thailand * S. A. Petrotech Co Ltd * */*** Saipem ** Thai Nippon Steel Engineering & Constr. Corp. UNOCAL Thailand Ltd. * THE NETHERLANDS Bluestream Subsea Services B.V. CK Agencies B.V. Colido BV * Eriks Frames Energy Systems B.V. ** IPS- Trade * Iv-Oil & Gas ** Netherland Art Olie ROSEN Europe B.V. Rotork Gears B.V * Stork Industry services Noordwest ** Stork Industry services tav SSC TRINIDAD AND TOBAGO The National Gas Comp. * of Trinidad and Tobago Ltd TUNISIA BG Tunisia */** Saipem S.A. Tunisie /* *

UAE */ **

* * */** * * * USA *

* * /* */** * *

* UK *

ABB Lummus Global B.V. Abu Dhabi Industrial Supply Bhatia Brothers CAPE Group, Abu Dhabi Hyundai Eng. & Contriction Co. Ltd. Hyundai Heavy Industries Co Ltd. J. Ray McDermott Middle East Inc. Pan Europe Industrial Equipments LLC RAMPCO International (R.I.T.S) Total Fina Elf Wadi Masila Trading LLC Beta International Inc. BW Offshore Conoco, INC DRC International Inc. ESSO Exploration Angola (Block 15) Ltd. Global Marine Int’l Drilling Corp. Helix Energy Solutions JPC International Kellogg Brown & Root INC Magnet, INC PM International Supplies, LLC Pneumatic and Hydraulic Public Service Co. Of New Mexico Suternational Inc. Transcoastal Marine Services TransEast Co Veritas DGC Wilson Supply

A&B Welding Aberdeen Tool Rental Ltd Acergy UK Limited * Adanac Valve Specialities Ltd. Air Tools Northern AKD Engineering ** */** Alba Gaskets Limited Alba Hydraflow Ltd. AMEC Capital Projects Ltd. AMEC Group Ltd AMEC Process & Energy * AMEC Services Ltd. Amerada Hess Ltd. Amoco (UK) Expl. Co. Ltd. Banbury Export Services Ltd. * Barrier (Offshore) Engineering Ltd BEL Valves * BG Storage (EAS) * BG Tunisia BHP Biliton Petroleum Ltd. Bibby Offshore Limites /*/** * BJ Process & Pipeline Services BPAmoco */** BP Exploration BP Exploration Oper. Comp. Ltd. /*/** Bridge Ind. Supplies Ltd. Bush & Hickman Ltd. */** Cansco Greig Engineering Ltd */ ** Centrica Easington */** Centrica Storage Ltd *** Chevron Compass Oilfield * Supply Company Ltd. * Conoco (UK) Ltd. ** ConocoPhillips UK */** Conoco Phillips Ltd (GB) /* Craig International Supplies Ltd. Crosby Valve & Eng. Div. Denholm Valvecare Ltd. Donline Ltd. ** Dron & Dickson Ltd Econosto UK Ltd Express Welding Supplies Expro North Sea Ltd. ExxonMobil Chemical Ltd. ExxonMobil Chemical Olefins Inc. */** Equipment Supply Euremica Limited */** Flexilife */** Flexitallic Ltd., Scotland Foster Wheeler Energy Ltd., Glasgow * Global Pipe Components (GPC House)

Global Marine Int’l Drilling Corp. GOT Ltd GPC House Gtcgroup Halliburton * Halliburton KBR ** HSP (Aberdeen) Ltd. Hyundai Engineering & Construction Co. Ltd., UK IKM Testing Ltd. * John Bell Pipeline * * J. Ray McDermott KCA Drilling Ltd. Klinger Ltd. */** Klinger Ltd Aberdeen */** Klinger Ltd Bradford ** Kværner Oil & Gas Ltd. London Fittings and Flange * */** Loughborough University/ BP Exploration Lloyd & Jones Engineers Ltd. ** Marathon Oil * Marine Logistics Limited MB Air Systems Mentor Subsea Tech. * Mobil North Sea LLC. Mobil North Sea Ltd. Motherwell Bridge Air System Ltd. National Oilwell Ltd UK National Oilwell Varco UK Ltd Norse Limited * /* Norson Power Ltd. */** Norson Services Ltd. Nova Oilfield Services * Novus Sealing Limited */** ODE Operations Divisjon Offshore Products International Limited O.I.L Engineering Ltd ** On Line Design & Engineering Ltd * */** Perenco UK * Peterson SBS Ltd Petrofac * * Petrology Ltd. PGS Atlantic Power Ltd. */** Pipefit Supplies Ltd. Phillips Petroleum Company (UK) Ltd. Procurement Services Ltd. /*/** PSL Energy Services Ltd Qserv R & M Electrical group * Richard Irvin & Sons Ltd. ** Richard Irvin Supplies & Distribtution */** Saipem UK (Sonsub Division) * Schlumberger Oilfiold UK Plc /* Score (Europe) Ltd. * Sealex Limited Severn Unival Ltd. */** Shell UK Ltd /*/** Shell (UK) Expl. & Prod. */** Stats Group, Stats House * Stolt Offshore, Aberdeen /* Subsea 7 /*/** Talisman Energy * Tecflo Energy Services Ltd. */*** Technip UK Ltd */**/*** Technip Offshore UK Ltd. Tekmar (UK) Ltd Texaco North Sea (UK), Ltd. Tool & Engineering Services Ltd Total E&P UK Plc */** /*/** Total E&P UK Ltd Total Fina Elf Exploration UK Plc * Total Oil Marine Plc. Tyco Fire & Intergrated Solutions Ltd Wesco Sourcing and Procurement Service Wood Group Eng. (North Sea) /*/** SINCOR VIETNAM */*** Cape Group Ltd. Hoan Vu Joint Operating Company Southern Petroleum Const’n J.S Co * * SWG Offshore International Pte Ltd YEMEN Canadian Occiental Petroleum Yemen Yemen LNG Company Ltd /** *

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.

79


6 Karmsund Maritime Vietnam Co., Ltd KaMVIET® is our owned daughter company established 2009 and situated with new production facilities in Nha Trang, Vietnam. With our experience from Norwegian technology, manufacturing and design we offer products of high quality and according to International quality standards. KaMVIET® is certified according to NS-EN ISO 9001:2015 and NS-EN ISO 14001:2015 for security, work and environment. PRODUCTS AND SERVICE In new modern mechanical facilities KaMVIET® specializes in high quality production in assembly and test of parts and complete mechanical equipment.

Milling, grinding, honing and lapping, in addition to assembly and testing for serial production are offered as well as state of art work. The design team offer service in developing, technical design together with a cost effective high quality production. KaMVIET® is certified according to NS-EN ISO 9001:2015 and NS-EN ISO 14001:2015 for security, work and environment. SUPPLIES KaMVIET® has available certified standard and exotic materials, according to international standards at stock at all time.

KaMVIET® production facilities at Nha Tran, Vietnam.

KaMVIET® main office.

Lot E11, Suoi Dau Industrial Zone, Cam Lam district, Khanh Hoa province, Vietnam Tel: +84 58 37 44 207 • Fax: +84 58 37 44 209 • E-mail: sales@kamviet.no • www.kamviet.no

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015- 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


Karmsund Maritime Offshore Supply AS THE COMPANY Karmsund Maritime Offshore Supply AS is a Norwegian technology company situated at Haugalandet, the west coast of Norway. KaMOS® specializes in developing and producing time, cost and safety efficient solutions and products, serving both onshore and offshore industries worldwide. Our business is to continue our efforts to improve issues relating to health, environment and safety at the workplace and in connection with the goods and services that we deliver. PRODUCTS KaMOS® products are the result of research and development done in conjunction with input from offshore industry players with more than 20 years of experience. KaMOS® products have been in the market since early 1990 and are patented worldwide. KaMOS® is focused and certified for NS-EN ISO 9001:2015 and NS-EN ISO 14001:2015 for security, work and environment. SUPPLIES KaMOS® has available stock at all times; ensuring deliveries can be made in the shortest possible time, to customers with time constraints. Achilles JQS

Qualified

Karmsund Maritime Offshore Supply AS, Kopervik

Specifications and images are subject to change without notice. Karmsund Maritime Group as is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply as. All rights reserved.


Karmsund Maritime Offshore Production AS KaMOP® stock, design and manufacture steel gaskets and packing material for the oil and gas industry worldwide. We have special materials for production in stock at all time; this gives the possibility for short delivery time to customers when time limits occur. KaMOP® is focused and based on NS-EN ISO 9001:2015 and NS-EN ISO 14001:2015 for security, work and environment.

Production facilities at Kvitsøy.

Materials: ••Soft iron ••SS316 ••SS316L ••SS304 ••SS321 ••UNS NO8904 ••UNS N10276 ••Inconell 625 ••Incoloy 825 ••Duplex F51

Kammprofiles: ••RF ••FF

••Duplex 2205 ••Super duplex 2507 ••6MO F44 (S31254) ••Low carbon steel ••Hasteloy ••Bronze ••Other special materials on request.

Ring Joints: ••R-oval ••R-octagonal ••RX-gaskets ••BX-gaskets ••Special gaskets

Sales office in Stavanger.

Soft cut materials: ••Graphite ••Vibrationsclamps ••Neoprene/nitrile ••Epdm-rubber ••Viton ••Silikon ••Cgf ••Pfte

Achilles JQS

Qualified

Visiting address: Vollsøytoppen 4, N-4180 Kvitsøy, Norway • Postal address: P.O.Box 233, N-4066 Stavanger, Norway Sales office: +47 47 46 78 42 • sales@kamop.no • Tel workshop: +47 51 73 64 00 Fax workshop: +47 51 73 64 01 • E-mail: production@kamop.no • www.kamop.no

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


7

Karmsund Maritime Group AS Contact details

NORWAY Karmsund Maritime Offshore Supply AS Post address: P.O.Box 484, N-4291 Kopervik NORWAY Sales office Visit/delivery address: Austre Karmøyveg 76, N-4250 Kopervik NORWAY Tel: +47 52 84 43 40 • Fax: +47 52 84 43 41 offshore@kamos.no • www.kamos.no Karmsund Maritime Offshore Production AS Post address: P.O.Box 233, N-4066 Stavanger NORWAY Workshop Visit / Delivery address: Vollsøytoppen 4, N-4180 Kvitsøy NORWAY Tel: +47 51 73 64 00 • Fax: +47 51 73 64 01 production@kamop.no www.kamop.no ASIA - SINGAPORE Karmsund Maritime Singapore PTE LTD Visit/delivery address: 100 Pasir Panjang Road #05-08, Singapore 118518 Tel: +65 6737 3096 • Fax: +65 6737 3097 sales@kamsing.no • www.kamsing.no

THAILAND Paps Thailand / Bangkok office Pipeline & Piling Services Co Ltd 26 Soi Chaloem Phrakiat Rama 9 Soi 2 Sukhumvit 103 Road Nongbon, Pravet, Bangkok 10250 THAILAND Tel: +(66) 02-745-9348 to 51 Tel: +(66) 02-745-9397 to 8 Fax: +(66) 02-399-0908 Paps Thailand / Head office Pipeline & Piling Services Co Ltd (Eastern Seaboard) 267/235 Muangmai Mabtapud T. Mabtapud, Muang, Rayong 21150 THAILAND Tel: +(66) 038-608370 to 1 Fax: +(66) 038-608372 www.paps-thailand.com NEW FOUNDLAND/LABRADOR PM International Suppliers, LLC 51 Saganoa Avenue, Unit 5 Mt. Pearl, Newfoundland A1N 4P9 CANADA Tel: +1 709 747-7705 • Fax: +1 709 747-5505 Sales office: 601 Mid-Florida Drive Lakeland, Florida 33813 Tel: +1 863 644 6300 Tollfree: +1 877 717 6300 Fax: +1 863 644 0023 info@pmfirst.com • www.pmfirst.com

VIETNAM Karmsund Maritime VIETNAM Co.,Ltd Visit/delivery address: Lot E11, Suoi Dau Industrial Zone Cam Lam district, Khanh Hoa province, VIETNAM sales@kamviet.no • www.kamviet.no

For the latest information and updates on KaMOS® Products and solutions visit our web site at:

www.karmsund.no

Specifications and images are subject to change without notice. Karmsund Maritime Group AS is not responsible for typgraphical errors. 2015 - 1 // KaMOS® PRODUCTS - Karmsund Maritime Offshore Supply AS. All rights reserved.


2 – KaMSING® Products  

2018 KaMOS Products

2 – KaMSING® Products  

2018 KaMOS Products