Page 1

Fire Eater College

Project Engineer Training id: 190010

The main objective with the Fire Eater Project Engineer education is to provide project engineers with the proper skills to enable them to work with the IMT-software (INERGEN® -Management Tool). The target group of the education

Skills obtained during the training course

Project Engineers, Product Managers and those employed within Technical Sales.

After completing the training course, graduates should be able to design a Fire Eater INERGEN® system.

The goal of the training course The overall objective of any Fire Eater College training course is to provide anyone working with Fire Eater with a greater understanding of the most common guidelines when working with Fire Eater equipment.

This will typically include working with different design concentrations, pipe design, being able to calculate pressure relief, flow and pipe dimensions, for stand-alone and multi-zone systems and generating part lists for the preparation of quotations.

The Project Engineer training course

Conditions and limitations

A 3 day training course during which the student will gain advanced knowledge of the various extinguishing agents on the market, with special focus on INERGEN®.

The Project Engineer training course is largely hands-on and students are required to bring a laptop computer. The laptop will need to have administrator access in order to install the IMT-software.

The student will receive a through introduction to Fire Eater components, typically including Fire Eater’s Control Inert system (Ci-system), including stand-alone systems, selector valves and activation options. The introduction will also cover basic hardware theory within the Fire Eater product range and the rules and regulations which may have a influence on how the product should be designed and handled. Most of the Project Engineer training course will focus on the Inergen Management Tool (IMT-software). The Project Engineer training course begins with a basic introduction to the IMT-software and ends up with a more advanced understanding of the design principles when designing, engineering and working with Fire Eater systems.

FEC_190010-Fire Eater College_IMT_rev. 0 2014

In order to provide the best possible training environment, the Project Engineer training course is typically limited to 4-6 students at a time. The training is conducted in English, so participants should be reasonably competent in understanding written and spoken English.


raduates of Fire Eater College will take an exam in order to obtain a competency certificate with a validity of 3 years from the date of issue.

Fire Eater College

Project Engineer Training id: 190010

Typical agenda Day 1: 09:00 - 11:45 - INERGEN and extinguishing agents 11:45 - 12:15 - Lunch 12:15 - 16:00 - Basic introduction to Fire Eater´s system 12:15 - 16:00 - Advanced Introduction to Fire Eater´s Ci & SV system Day 2 09:00 - 11:00 - Introduction and installation of the IMT-software 11:00 - 11:45 - Standards and regulations when designing Fire Eater systems 11:45 - 12:15 - Lunch 12:15 - 16:00 - Basic calculation of stand alone systems Day 3 09:00 - 11:45 - Working with selector valve systems 11:45 - 12:15 - Lunch 12:15 - 12:45 - Project Engineering test and examination 15:15 - 16:15 - Working with the IMT

Duration Fire Eater College provides two standard training courses with regards to the IMT-software. The courses are usually based on a standard setup but can be tailored to the specific audience. Duration of the standard educations:  Basic IMT introduction 1-4 hours  The Project Engineer training course 3-4 days

For more information about Fire Eater www.fire-eater.com

Inquiries concerning Fire Eater College http://www.fire-eater.com/en/fire-eater-college-en/ tilmeld-seminar-uk Contact Kristian Petersen phone: +45 4095 2769 e-mail: kp@fire-eater.com Fire Eater A/S Vølundsvej 17 | 3400 Hillerød | DK www.fire-eater.com

Sherloch FEC_190010-Fire nummer Eater College- IMT rev. 0 2014

Profile for Fire Eater

Fire Eater College - salessheet - Project Engineering  

FEC Education

Fire Eater College - salessheet - Project Engineering  

FEC Education