__MAIN_TEXT__

Page 1

Fire Eater College

Service Technician Education id: 190030

The main objective of the Fire Eater Service Training Course is to provide service technicians with the proper skills to enable them to carry out service and maintenance in accordance with Fire Eater guidelines. The target group of the training course

Conditions and limitations

Service Technicians

The goal of the training course

The student or the student’s employer must have ordered the special tools required to be able to perform service and maintenance.

The overall objective of any Fire Eater College training course is however, for the student to gain a greater understanding of the most common guidelines when working with Fire Eater equipment.

In order to provide the best possible training environment, the Service technician training course is typically limited to 10-12 participants at a time.

The Service Technician training course A 2 day training course during which the student will gain overall knowledge of the various extinguishing agents on the market, with special focus on INERGEN®. The student will receive a thorough introduction to Fire Eater components, typically including Fire Eater’s Control Inert system (Ci-system), including stand-alone systems, selector valves and activation options. The introduction will also cover basic hardware theory within the Fire Eater product range and the rules and regulations which may have a influence on how the product should be handled.

The training is conducted in English, so participants should be reasonably competent in understanding written and spoken English.

G

raduates of Fire Eater College will take an exam in order to obtain a competency certificate with a validity of 3 years from the date of issue.

ff Service of detection systems and control panels is not included in the standard training course.

Most of the Service Technician course will be hands-on training.

Skills obtained during the training course After completing the training course, graduates should be able to service a Fire Eater INERGEN® system ccorrectly. This will typically include service and handling of cylinders in stand-alone and multi-zone systems, including correct handling and service of pressurised equipment, valves, actuators, piping, pressure relief, etc.

FEC_190030_Fire Eater College_Service UK Rev.04

ff Subjects not covered by the standard education needs to be ordered separately.

ff Using the right tools is a necessity for obtaining the competency certificate.


Fire Eater College

Service Technician Education id: 190030

Part List - 530830 Toolkit: Ci SV 2015 Pos

Item No.

Description

Part of

1

305490

IV8 sep disc

530810

302155

Tool: IV4 Resetting

2

305491

IV8 Act plug

530810

212043

Service Kit IV7 Box

3

305495

Ci Actuator Reset Tool

530810

212044

Service Kit IV4 Box

4

530506

IS8B Electric Circ Tester

530810

5

530502

Manoswitch tester

530810

6

530520

Ci Force Act test

530810

7

530525

Ci Outlet Damper

530810

8

503404

Service kit box Ci IV8

530810

9

303432

Wrench 32 mm

530810

10

303452

In-Hex Tee 2.5 mm

530810

11

303470

End cutter 160 mm

530810

12

504204

Test lamp M12

530810

13

305149

SV22 Reset tool

530820

14

305148

APTB (Test port)

530820

15

305147

APTB Co2 adapter

530820

16

305188

SV22 Switch installation

530820

17

530530

Tool: NRV 1/4 Test Flow

530820

18

530531

Tool: NRV 1/4 Test No Flow

530820

For more information about Fire Eater

19

530540

Tool: Pressure switch setter

530820

www.fire-eater.com

20

303403

Tool: Wrench kit 8-19

530840

21

303408

Wrench 8”

530840

22

303454

Tool: In-Hex Tee 4 mm

530840

23

303455

Tool: In-Hex Tee 5 mm

530840

FEC_190030_Fire Eater College_Service UK Rev.04

The following items are included in the training course but not it

The typical agenda Day 1: 09:00 - INERGEN and extinguishing agents 10:45 - Rules and regulations when working with Fire Eater systems 11:45 - Lunch 12:15 - Introduction to Fire Eaters components and system 13:30 - Hands-on and resetting of system (IV4 and IV7) 15:45 - Evaluation Day 2 09:00 - Introduction to service checklists 10:30 - Introduction to Fire Eaters Ci IV8 and SV22 Test port components 11:45 - Lunch 12:15 - Hands-on and resetting of system (Ci IV8 and SV22 Test port) 14:30 - Test and exam 15:30 - Evaluation

Contact Kristian Petersen phone: +45 4095 2769 e-mail: kp@fire-eater.com Fire Eater A/S Vølundsvej 17 | 3400 Hillerød | DK www.fire-eater.com

Profile for Fire Eater

Fire Eater College- Salessheet - Service Education  

Fire Eater College- Salessheet - Service Education  

Advertisement