__MAIN_TEXT__

Page 1

Fire Eater College

The installation training course id: 190020

The main objective of the Fire Eater Installation Training Course is to provide technicians with the proper skills to enable them to install INERGEN-systems in accordance with Fire Eater guidelines. The target group of the training course

Skills obtained during the training course

Fitters, Service Technicians, Project Engineers and Product Managers.

After completing the training course, graduates should be able to install a Fire Eater INERGEN® system correctly.

The goal of the training course

This will typically include cylinder handling and installation of stand-alone and multi-zone systems, including correct handling of pressurised equipment, installation of valves, actuators, piping, pressure relief, etc.

The overall objective of any Fire Eater College training course is to provide anyone working with Fire Eater with a greater understanding of the most common guidelines when working with Fire Eater equipment.

The Installation training course A 2 day training course during which the student will gain overall knowledge of the various extinguishing agents on the market, with special focus on INERGEN®. The student will receive a thorough introduction to Fire Eater components, typically including Fire Eater’s Control Inert system (Ci-system), including stand-alone systems, selector valves and activation options. The introduction will also cover basic hardware theory within the Fire Eater product range and the rules and regulations which may have a influence on how the product should be installed and handled. Most of the Installation course will be hands-on training.

Conditions and limitations The student or the student’s employer must have ordered the special tools required to be able to perform service and maintenance. In order to provide the best possible training environment, the Installation training course is typically limited to 10-12 participants at a time.

G

raduates of Fire Eater College will take an exam in order to obtain a competency certificate with a validity of 3 years from the date of issue.

ff Installation of detection systems and control panels is not included in the standard training course.

ff Subjects not covered by the standard education needs to be ordered separately.

ff Using the right tools is a necessity for obtaining the competency certificate.

FEC_190020_Fire Eater College Installation.Rev.03


Fire Eater College

The installation training course id: 190020

Typical agenda

Part List - 530830 Toolkit: Ci SV 2015 Pos

Item No.

Description

Part of

1

305490

IV8 sep disc

530810

2

305491

IV8 Act plug

530810

3

305495

Ci Actuator Reset Tool

530810

4

530506

IS8B Electric Circ Tester

530810

5

530502

Manoswitch tester

530810

6

530520

Ci Force Act test

530810

7

530525

Ci Outlet Damper

530810

8

503404

Service kit box Ci IV8

530810

9

303432

Wrench 32mm

530810

10

303452

In-Hex Tee 2.5mm

530810

11

303470

End cutter 160 mm

530810

12

504204

Test lamp M12

530810

13

305149

SV22 Reset tool

530820

14

305148

APTB (Test port)

530820

15

305147

APTB Co2 adapter

530820

16

305188

SV22 Switch installation

530820

17

530530

Tool: NRV 1/4 Test Flow

530820

18

530531

Tool: NRV 1/4 Test No Flow

530820

19

530540

Tool: Pressure switch setter

530820

20

303403

Tool: Wrench kit 8-19

530840

21

303408

Wrench 8”

530840

22

303454

Tool: In-Hex Tee 4 mm

530840

23

303455

Tool: In-Hex Tee 5 mm

530840

FEC_190020_Fire Eater College Installation.Rev.03

Day 1 09:00 INERGEN and extinguishing agents 10:45 Introduction to Fire Eaters components and system 11:45 Lunch 12:15 Standards and regulations when working with Fire Eater systems 13:15 Hands-on and resetting of system 15:45 Rounding of day 1 Day 2 09:00 Introduction to Ci IV8 and SV22 components 11:45 Lunch 12:15 Hands-on and resetting of Ci IV8 and SV22 system 14:45 Test and exam 15:45 Evaluation 16:00 End of training

For more information on Fire Eater Contact Kristian Petersen phone: +45 4095 2769 e-mail: kp@fire-eater.com Fire Eater A/S Vølundsvej 17 | 3400 Hillerød | DK www.fire-eater.com

Profile for Fire Eater

Fire Eater College - Salessheet - Installation education  

FEC education

Fire Eater College - Salessheet - Installation education  

FEC education

Advertisement