H2S & SCBA Mask Fit Test Consulting Our goal is to provide effective and sufficient training and advise to clients where H2S and other Toxic gasses are present. This service is all inclusive and will lead to a decrease in Illness and Injuries, penalties and notices as well as an increase in morale of workers , safety awareness and compliance with health and safety principles and procedures. Main expertise: H2S training and certification(TEEX) LEL and UEL ( Methane/H2S/Other) SCBA mask fit testing including Respirators. Confine space permit entry and rescue Worker Awareness Training Program (New OHSA 2015) Supervisor Awareness Training Program (New OHSA 2015) Other: Medical Emergency Response Plans Fitness To Work OSHA Classification (MTC, LTI,ETC...) Internal Auditing
Training, Testing and Audits Employer's Responsibilities -General
The employer should provide training so that all employees whose work is regulated by these section acquire the understanding, knowledge and skills necessary for the safe performance of their duties.( OHSA, ANSI,NIOSH ) This includes. Safety equipment. Correct usage and correct fitting as per standards. Testing and Checking of equipment. Drills and exercises to test response and rescue capabilities. Audit of equipment, training records and action traction points. Documentation of training, drills and audits. Employer's Responsibilities Concerning Toxic –Explosive Substances An employer has various duties relating to hazardous materials, including the duty: to identify hazardous materials in the prescribed manner and explain risk to workers. to inform and train employees with regards to Material Safety Data Sheets (MSDS), to provide information and prescribed instruction and training to workers who are expose to toxic / explosive gasses like Methane, H2S and others.
Target Groups Hydrogen sulfide is produced naturally from decaying organic matter. It can be released from sewerage sludge, liquid manure, and sulfur hot springs, and with natural gas. It is also used or is a by-product in many industrial processes such as: • • • • • • • • • • • • •
Petroleum production and refining, oil and gas people Sewer and wastewater treatment , municipality workers and farm workers Agricultural silos and pits, farm workers Textile manufacturing Pulp and paper processing Cement and related industries Food processing Hot asphalt paving Chemical Factories and producers. Mining Breweries Ambulance personnel Fire and Rescue personnel when responding to incidents.
On Site Training and Testing • • • • • •
H2S training & Certification, 4 -6 hours SCBA and Respiratory mask fitting test, 30 min. per client. Confine Space Entry permits and Rescue protocols 1 day Stretcher teams, Rescue training, and Emergency Response, 1 day Health and Safety awareness, workers and supervisors as per OHSA 2015 Internal Audits, 2 days.
Why onsite training: Personnel must be aware of risk and hazards in their specific work environment Use equipment that they are familiar with, including correct usage, tests and calibration On site training can be used as audit tool to highlight shortcomings. Lower cost, training can be done during working hours.
H2S Training (MSDS) The Hydrogen Sulfide training program should be considered as a core program which relates to many other integral aspects of safety in the Oil & Gas Industry, such as, Gas Testing, Respiratory Protection, Hazmat, Hazwoper and Confined Space Entry.
Course is intended for all workers in various industries who could be exposed to hydrogen sulphide (H2S). The primary focus is to provide generic H2S course content to help workers work safely in and around H2S environments. The course covers the physical properties and health hazards of H2S, how to protect oneself and basic rescue techniques. Included MSDS and associates toxic-flammable gasses. Course topics and activities include ( Course adjusted to work environment) H2S properties and MSDS Respiratory Protective Equipment, Respirators and SCBA Detection of H2S. Fixed and personal devices, Rig Rats, etc... Rescue Techniques Case Studies and table top exercises. Gas Detection and Respiratory Protective Equipment Overview Written examination
On completion of this course the candidate will be able to identify the properties, sources and hazards of H2S . Candidates will have the ability to respond according to the specific MSDS. This course is designed to meet the API-RP-49 & 55, OSHA and ANSI requirements. Certificate valid for one year.
SCBA & Respirators Mask Fitting Test
â€˘ 1910.134(a)(1) In the control of those occupational diseases caused by breathing air contaminated with harmful dusts, fogs, fumes, mists, gases, smokes, sprays, or vapors, the primary objective shall be to prevent atmospheric contamination. When effective engineering controls are not feasible, appropriate respirators shall be used pursuant to this section. Person wearing respirators/SCBA will have to undergo mask fit test for each specific make and model that will be valid for 1 year, a card will be issued with the make and model number that the person was tested with. â€˘ 1910.134(a)(2) A respirator shall be provided to each employee when such equipment is necessary to protect the health of such employee. The employer shall provide the respirators which are applicable and suitable for the purpose intended. The employer shall be responsible for the establishment and maintenance of a respiratory protection program.
Confine Space Training The objective of this training is to comply with standards as set below and will include:
• • • • •
Practical completion of confine space entry permits. Practical sessions with gas measurements (Handheld), and air ventilation. Practical sessions with self-contained breathing apparatus (SCBA) if on worksite. Practical sessions with Rescue Procedures and updated medical treatment. Drills and exercises as part of MERP/LERP.
H2S training and certification as per ANSI (ANSI/ASSE Z390.1-2006) and OHSA.(OSHA 29 CFR 1910.1200 (Haz-Com), 1910.134 (respiratory protection) and 1910.120(Haz-WOPER) standards. NIOSH, Occupational Health Guidelines for H2S. SCBA/ Respirator face piece fit testing is required by NFPA, ANSI, OSHA and other safety standards.(OHSA Revised Respiratory Protection Standard, 29 CFR 1910.134) Confine space entry permit and training as per NIOSH ( A guide to safety in confine spaces and criteria for a recommend standard: working in confine spaces) - OHSA 1910.146 and ANSI Z117.1-2009. Lockout/Tag out of Energy - 29 CFR 1910.147 and ANSI Z244.1-1982 Pre-requisites Emergency response training contains physically demanding and potentially stressful elements. All personnel who participate in such training must be medically fit and capable of participating fully. Any candidates with special needs must make this training company aware at the earliest opportunity.
Trainer Qualification and Experiences I worked with several companies including Shell(SRAK project in Saudi-Arabia), Schlumberger, Statoil(Norway) Parson &Brinkerhoff (Iraq),Saipem(KSA) and VikingAfren(Kurdistan). Experience on and offshore installation as well as seismic. This included Training, Auditing, MER drills and exercises with feedback to enhance effective response in harsh environments including high levels of H2S. H2S training, Training with rescue teams, confine space permit and rescue exercises.
SAQA NEBOSH TEEX OHSAcadamy ANSI
Instructor - Education and Training: BAdmin Degree with Administration and Industrial Psychology as majors. ( UNISA 1996) N.DIP Electrical Engineering-Light Current (Electronics) N.DIP EMC (ALS Paramedic), including 12 Rescue modules, Rescue Instructor (Disaster Management, Fire, Hazmat, Confine Space) Nebosh IGC, IOSH Technician. H2S Instructor(TEEX) Safety Specialist certification Train the trainer certification Various short courses: Command and Control, Health and Safety, Diving, H2S and offshore survival. Paramedic ALS short courses: FMA, ITLS and ACLS, etc... Internal Auditor: ISO 9001 and 14001, OHSAS 18001 Pending: OHST - BCSP(Board of Certified Safety Professionals) Related Experience: Paramedic( ALS) Rescue Instructor (CPUT HSE Emergency Control Centre HSE/Health Advisor/ ERC H2S Internal Auditing
20 plus years 20 plus years. 15 plus years 15 plus years 10 plus years 10 plus years 10 plus years
H2S & SCBA Mask Fit Test Consulting Contact details:
www. merandftw.com email@example.com Skype: montyjh2000 Facebook: montyjh2000 LinkedIn: Josias Montgomery
ANSI American National Standards Institute
ASSE American Society of Safety Engineers
ISO International Organization for Standardization
OHSA Occupational Health and Safety Administration
NIOSH H2S information: www.cdc.gov/niosh/topics/HydrogenSulfide/
Oil and gas drilling H2S safety: www.osha.gov/SLTC/etools/oilandgas/general_safety/h2s_precautions.html Hydrogen Sulfide: Developing Effective Training www.asse.org
Medical Emergency Response Plans and Fitness To Work www.merandftw.com
Published on Jun 18, 2014
H2S training and certification SCBA and Respirators Mask Fit Test Confine Space Entry Permit and Rescue Medical Emergency Response Plans Fit...