Page 1

john paulding Associates

Sept. 2011

Publicity Update Tel:01223 83 47 77 e-mail: info@johnpaulding.com

Call jppublicity FREE on


john paulding Associates Contact details Telephone: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +44 (0) 1223 834777 Fax:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +44 (0) 1223 835597 Mobile: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +44 (0) 7970 11 98 08 Skype: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . jppublicity e-mail: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . jp@johnpaulding.com e-mail (large files): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . sales@johnpaulding.com Website . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . www.johnpaulding.com Mail: John Paulding Associates 8A Hinxton Road, Duxford, Cambridgeshire CB22 4SD United Kingdom


AmD Tuning Unit 6, Cliffside Trade Park, Motherwell Way, West Thurrock, Essex RM20 3LE (Next to Ikea Lakeside) Telephone: 01708 861827 Fax: 01708 863031

AmD Tuning

Press Release For immediate release

www.amdtuning.com

Another chance to take advantage of the AmD/Milltek Special Offer AmD Tuning’s last Remap / Milltek Exhaust offer proved so popular that AmD are bringing it back! For a limited period when you buy a Milltek exhaust at AmD Tuning you can also have an engine remap at HALF PRICE!. Here are some examples of the savings you could make when you buy both items together... Porsche 996 Turbo . . . . . . . . . £2806 Ford Focus RS MkII . . . . . . . . . £939 Vauxhall Astra VXR . . . . . . . . . £670 BMW M3 E92 . . . . . . . . . . . . . £1239 Mini Cooper S Turbo . . . . . . . . . £785

Prices shown include VAT.

. SAVE £400 . SAVE £250 . SAVE £250 . SAVE £250 . SAVE £250

VW Golf MkIV GTi . . . . . . . . . . £537 VW Golf MkV GTi . . . . . . . . . . . £783 VW Scirocco 2.0T . . . . . . . . . . £734 Audi A5 3.0TDi . . . . . . . . . . . . . £994 Audi TT RS . . . . . . . . . . . . . . . £1301 Seat Leon Cupra . . . . . . . . . . . £676

. SAVE £150 . SAVE £250 . SAVE £250 . SAVE £250 . SAVE £350 . SAVE £250

Contact AmD Tuning for further details on 01708 861827 or visit www.amdtuning.com

Click for make specific lists: Audi, BMW, Ford, Vauxhall, VW

Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained by e-mail from info@johnpaulding.com


The World Leaders in Fastener Technology 1863 Eastman Avenue, Ventura, California. USA

www.arp-bolts.com

PRESS RELEASE for immediate release

Mitsubishi 2.0L (4G63) Turbo Flexplate Bolt Kits

ARP - The world leader in fastener technology has just released two new Pro Series flexplate bolt kits for Mitsubishi 2.0L (4G63) Turbo 4-cylinder applications.

All Pro Series flexplate bolt kits feature an exclusive flat 12 point head design and a larger than stock underhead radius for increased strength.

Each bolt is centerless ground to ensure the bearing surface is perpendicular to the threads creating equal load distribution and are nominally rated at 200,000 psi.

Optimum design, enhanced reliability and increased strength are the main attributes of ARP’s Pro Series flexplate bolt kits.

107-2901 Mitsubishi 2.0L (4G63) Turbo 4-cylinder (1992 & earlier) 6 pcs. 107-2902 Mitsubishi 2.0L (4G63) Turbo 4-cylinder (1993 & later) 7 pcs.

ARP products are widely available from appointed distributors throughout Europe. For further information visit www.arp-bolts.com Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained by e-mail from info@johnpaulding.com


The World Leaders in Fastener Technology 1863 Eastman Avenue, Ventura, California. USA

www.arp-bolts.com

PRESS RELEASE for immediate release

Mitsubishi 2.0L (4G63) Turbo Flywheel Bolt Kits

ARP - The world leader in fastener technology has just released two new Pro Series flywheel bolt kits for Mitsubishi 2.0L (4G63) Turbo 4-cylinder applications.

All Pro Series flywheel bolt kits feature an exclusive flat 12 point head design and a larger than stock underhead radius for increased strength.

Each bolt is centerless ground to ensure the bearing surface is perpendicular to the threads creating equal load distribution and are nominally rated at 200,000 psi.

Optimum design, enhanced reliability and increased strength are the main attributes of ARP’s Pro Series flywheel bolt kits. 107-2801 Mitsubishi 2.0L (4G63) Turbo 4-cylinder (1993 & later) 7 pcs. 107-2802 Mitsubishi 2.0L (4G63) Turbo 4-cylinder (1992 & earlier) 6 pcs.

ARP products are widely available from appointed distributors throughout Europe. For further information visit www.arp-bolts.com Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained by e-mail from info@johnpaulding.com


617 - 631 Eastern Avenue, Ilford, Essex IG2 6pn Telephone: 0208 554 2281 Fax: 0208 554 4828 e-mail: sales@burtonpower.com www.burtonpower.com

PRESS RELEASE for immediate release

Electric Cooling Fan Kits There are many advantages to fitting an electric cooling fan - less parasitic drag on the engine, quicker warm up, and it only cools the engine when necessary etc. etc.

Now Burtons are stocking the very reasonably priced range of CAB cooling fans and Revotec accessories that have been specifically designed to work with them.

CAB Fans are available from 167mm diameter up to 385mm, in High Power or Slimline low profile to enable them to fit most applications. They are also available as ‘suckers’ or ‘blowers’ depending on if they are to be mounted in front or behind the radiator.

Revotec offer thermostatic control units that come in various diameter sizes to fit into the top hose and automatically switch the fan on and off as required. Revotec also produce aluminium mounting brackets for CAB fans, or if you prefer you can use flexible ‘quickmount’ ties to fix the fan to the radiator fins.

Burtons can make up a kit to suit your specific vehicle using one or two CAB fans and the appropriate Revotec accessories. Fan prices start at just £47.95, thermostatic controller kits are £63.95, Quickmounts £5.95 and Alloy Brackets £12.20 per pair. All prices include VAT. for further details contact Burton Power on 0208 554 2281 www.burtonpower.com Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained by e-mail from info@johnpaulding.com


617 - 631 Eastern Avenue, Ilford, Essex IG2 6pn Telephone: 0208 554 2281 Fax: 0208 554 4828 e-mail: sales@burtonpower.com www.burtonpower.com

PRESS RELEASE for immediate release

Battery Protection Mat If you’ve ever had a battery leak you’ll know just how quickly it can ruin paintwork. If you don’t notice it, you’ll even end up with it eating right through the sheet metal.

Fortunately prevention is easy. Burtons are now stocking these American made Battery Protection Mats. Cut it to size, place it under your battery and it will absorb any acid leaks before it reaches the paintwork or metal. It will help absorb vibration too.

Battery Mats are made from absorbent and acid resistant polypropylene felt with a latex binder. They are easy to cut, safe to handle and can be installed in minutes.

Supplied in an 8” x 12” sheet. Order as part number RIC1000.50. Retail price £6.95 incl. VAT for further details contact Burton Power on 0208 554 2281 www.burtonpower.com Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained by e-mail from info@johnpaulding.com


617 - 631 Eastern Avenue, Ilford, Essex IG2 6pn Telephone: 0208 554 2281 Fax: 0208 554 4828 e-mail: sales@burtonpower.com www.burtonpower.com

PRESS RELEASE for immediate release

Ford Focus ‘500’ Badge Ford only built 500 examples of their stunning matt black 350ps Focus RS500.

If you missed out on owning one of these future-classics you can make a passable look-alike by having your RS covered in matt black foil and fitting one of these genuine Ford ‘500’ badges to your tailgate. Ford may have only made five hundred RS500 cars but they made considerably more badges. Burtons keep loads of them in stock. - and unlike the cars they retail at just £20.38 each. for further details contact Burton Power on 0208 554 2281 www.burtonpower.com

Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained by e-mail from info@johnpaulding.com


Cambridge Motorsport Parts Ltd. Unit 5 Lacre Way, Letchworth Garden City, Hertfordshire. SG6 1NR Telephone: 01462 684300 Email sales@cambridgemotorsport.com www.cambridgemotorsport.com

PRESS RELEASE for immediate release

Coaxial Hydraulic Clutch Release for Triumph TR2 - TR6 Cambridge Motorsports Parts are now offering a co-axial hydraulic clutch release kit or Triumph TR2 - TR6

The kit replaces the original slave cylinder, cross shaft and fork with a hydraulic cylinder located on the front of the gearbox, that is bled from outside the bell housing.

This offers a light and controllable pedal even with competition clutches.

The conversion is designed primarily for rally and race use.

The kit is available to fit all TR2-6 models. ÂŁ375 + vat = ÂŁ450 incl. VAT.

For more details telephone 01462 684300 or visit the Cambridge Motorsport Parts website... www.cambridgemotorsport.com

Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained by e-mail from sales@johnpaulding.com


The Octagon St James Mill Road Northampton NN5 5RA United Kingdom

www.cosworth.com

Telephone: +44 (0)1604 598300 Fax: +44 (0)1604 598301

PRESS RELEASE for immediate release Cosworth Duratec Crate Engines Cosworth now have around half a dozen different versions of the Cosworth Ford Duratec engine available as crate engines in various capacities and states of tune. The engines are suitable for kit cars, uprating a road car, track day specials and of course out and out race and rally cars.

Cosworth start with all the individual parts direct from Ford, plus their own tuning components such as Cosworth forged pistons and connecting rods, high-performance bearings and cams, modified cylinder heads, barrel throttles and air filters.

Engines are available as short or long blocks in 2.0 and 2.3 litre capacities and states of tune from 205bhp (standard was 145hp) to 280 and even 300hp on some specially built race engines.

In a Caterham type car this would propel you Click for more images from 0-60mph in between 3.7 and 3.1 seconds depending on the state of tune and if you keep your foot down you’ll easily reach 150mph!

There are a number of Cosworth options that can be included in your bespoke engine such as dry sump and roller barrel throttle bodies, and the engines come with the reassurance of Cosworth’s technical back up to ensure it achieves its intended purpose.

You can also be assured of the quality of the engines. They are assembled in the same build-shop as Cosworth’s F1 engines, Aston Martin engines and many other race, mainstream motor industry and military projects. Since Cosworth is an aerospace manufacturer everything they make conforms to the standards of that industry which is far more demanding than usual automotive requirements!

Cosworth Duratec crate engines start at £5499.00, but each one is built to order and price will be according to the agreed spec. Orders can be placed through your local Cosworth appointed dealer. Call +44 (0) 1604 598300 to find your local dealer. For further information visit www.cosworth.com or follow us on Facebook

Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained by e-mail from sales@johnpaulding.com


The Octagon St James Mill Road Northampton NN5 5RA United Kingdom

www.cosworth.com

Cosworth Stroker Kit for Mitsubishi 4G63

Telephone: +44 (0)1604 598300 Fax: +44 (0)1604 598301

PRESS RELEASE for immediate release

Increasing engine displacement by lengthening the piston stroke results in increased power and torque.

Cosworth’s 2.2L Mitsubishi 4G63 stroker assembly is one of the best way to add performance to your Evolution 4-9 engine. However stroking the 4G63 engine places enormous amounts of stress on various engine components including the crankshaft. That’s why Cosworth has engineered a special 94mm (2.2L) crankshaft that is 50%-80% stronger in critical areas than typical aftermarket parts.

By enlarging the rod journal diameter and increasing rod-to-main journal overlap, high stress areas have been strengthened and crankshaft flex has been reduced, resulting in a component that is dependable for all forms of racing.

The crankshaft features the same oiling scheme as Cosworth’s four cylinder race engines that have won all forms of racing including WRC, BTCC, and Formula Atlantic. Additional features include journal radiuses and various machined areas that are optimised for maximum strength. These features, when combined with Cosworth matched, motorsport grade engine components, will yield potentially big gains in torque while allowing the engine to rotate and produce power in the higher rpm range.

Each Cosworth crankshaft is machined in-house from a solid billet of EN40B steel and includes a 50 hour heat-treat and quench process in a nitrogen atmosphere and bath. (Most aftermarket crankshaft manufactures only use an 8 hour process). Cosworth crankshafts are also Isotropically Superfinished for superior friction reduction and lubrication properties.

The Cosworth 4G63 2.2L Stroker Kit (PN 20023845) contains the Crankshaft plus Cosworth Forged Pistons, Forged H-Beam Connecting Rods and Cosworth Steel Backed Multi-layer Bearings. All parts are motorsport grade and matched for maximum reliability and performance. Retail price £3618.00 plus VAT. To find your local Cosworth appointed dealer call +44 (0) 1604 598300

Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained by e-mail from sales@johnpaulding.com


European Distributors:Nimbus Motorsport 30 Main St.,Wetwang, Driffield East Yorkshire YO25 9XJ United Kingdom

Design Engineering Inc. 604 Moore Road, Cleveland, Ohio 44012. USA

Telephone:- +1 800 264 9472

Telephone:-+44 (0)1377-236170

Fax:-+1 440 930 7967 www.designengineering.com

Fax:-+44 (0) 1377-236175 www.nimbusmotorsport.com

PRESS RELEASE Reflect-A-Gold - now in more sizes than ever

The Original Aerospace Heat Barrier with Self Adhesive Backing

Design Engineering, Inc, the world leader in thermal tuning products, and the originator of Reflect-A-GOLD now offers the widest range of sizes and one of the thinest reflective gold heat barrier materials on the market. A True Aerospace Material Reflect-A-GOLD was developed for the aerospace industry to cope with the extreme temperature-shifts that exist in that environment. From there the transition to the performance automotive and race market was a natural progression. Ultra Efficient Heat Barrier Reflect-A-GOLD is a state-of-the-art, fire resistant, polymer laminated glass cloth that is extremely light weight and capable of handling continual operating temperatures up to 455º C (850º F), reflecting 80% of all radiant heat while offering a weight savings advantage over other types of reflective materials. It is fire resistant Ultra Thin! Reflect-A-GOLD is ultra thin and requires very minimal clearance, Reflect-A-GOLD is a highly conformable material that has a pressure sensitive adhesive backing that is easy to apply and remove. Common uses include wrapping wire bundles, fuel lines, engine covers, seat bottoms, bulk heads, fuel cells, engine compartment…the possibilities are endless. It is also highly attractive and makes a distinctive and easily cleaned coating for engine bays and firewalls. Reflect-A-GOLD is available in several standard configurations including: 1½" (38mm) and 2” (50.8mm) wide by 15 ft (4.572 metre) and 30 ft (9.144 metre) rolls, and cut sheet sizes of 12” x 12” (30.5 x 30.5cm), 12” x 24” (30.5 x 61cm) , 24” x 24” (61 x 61cm). More sizes! It is now also available in 24” x 150ft (61cm x 45.72 metre) rolls and can even be supplied as custom cut lengths - to special order. Prices start at £18.68 + VAT for a 12”x12” (30.5 x 30.5cm) sheet NB: Metric sizes are approximate

Order directly on-line from www.nimbusmotorsport.com Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained by e-mail from info@johnpaulding.com


PRESS RELEASE

AUTO Inparts Ltd. Unit L2, Cherrycourt Way, Stanbridge Road, Leighton Buzzard, Beds., LU7 4UH United Kingdom

Telephone 01525 382713

for immediate release

Fax 01525 382718 e-mail sales@autoinparts.com

E-TECH Alloy Wheel Paint

E-TECH has just introduced a new satin finish alloy wheel paint that has been developed to refurbish and restore the appearance of your alloy wheels or give them a totally new look and lease of life. These paints are inexpensive, simple to use and provide a durable coating which is resistant to brake dust, cleaning chemicals and road salt. They dry to a hard, chip resistant, long lasting finish which is resistant to cracking and flaking.

Available in:Motorsport Black 400ml A deep rich finish for the ultimate aggressive motorsport look

Competition White 400ml A lustrous brilliant white finish creating the perfect classic competition look

Technik Grey 400ml A subtle but precise metallic anthracite colour creating a modern hi-tec finish

Drift Gold 400ml A uniquely blended colour that gives a distinctive deep golden metallic finish

E-TECH Alloy Wheel Paint: SRP is ÂŁ8.99 incl vat per 400ml can.

Silver Alloy Wheel Paint 400ml A medium metallic silver with great reflective qualities and depth

Clear Alloy Wheel Lacquer 400ml Transforms the satin finish into a high gloss wet-look. Scratch resistant and resistant to fuel, chemicals, UV rays and weathering. Easy to apply and quick drying.

For further details contact sales@autoinparts.com or visit the website: www.autoinparts.com Press Release prepared by John Paulding Associates. Photographs and other details for publication available by email: info@johnpaulding.com


www.essexracingclassics.com

PRESS RELEASE for immediate release

Essex Racing House. 29 Brook Road, Brook Road Industrial Estate, Rayleigh, Essex SS6 7XL Telephone: 01268 740631

“Show” Quality Resprays from Essex Racing Classics If you have a classic car or any sort of ‘interesting’ vehicle that’s in need of paint work you would do well to resist the temptation to go to the local crash repair shop and look for a more specialised refinisher. Essex Racing Classics are just that sort of company. They now have a fully equipped paint shop that can offer paint and bodywork that can justifiably be described as ‘show quality’. Take this 1973 Cortina for example. This is no ordinary Cortina GLX. It has a genuine Cosworth V6 residing under the bonnet that looks as if it was original fitment. Naturally this is the sort of car that deserves a proper show quality paint job as opposed to a ‘quick blow over’ which is why the owner took the car to Essex Racing Classics. Prices are obviously determined by the amount of work required but as a guide, a show quality re-paint on a car of this size which required no bodywork repairs would start at around £3500 including VAT.

For more details and a quotation call Essex Racing Classics on 01268 740631 or visit http://www.essexracingclassics.com We’re close to the M25 Dartford Crossing just of the A127 Southend Arterial Road TRADE ENQUIRIES WELCOME Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained by e-mail from info@johnpaulding.com


e: enquiries@gazshocks.com t: +44 (0)1268 724585 f: +44 (0)1268 724536

PRESS RELEASE For immediate release

Follow us on FACEBOOK

Gaz Shocks Ltd Rayridge House Swinborne Road Burnt Mills Industrial Estate Basildon, Essex, SS13 1EH United Kingdom

GAZ ‘GHA’ Suspension for BMW 1 Series

Leading suspension specialists GAZ are now offering their GAZ GHA coilover suspension for BMW 1 Series 118d and 120d models.

The kit is especially suitable for cars that have been subject to extensive power upgrades.

GAZ GHA coilover inserts are provided for the front with adjustable coilover struts provided for the rear. The front struts are adjustable from the top for bump and rebound and the rears have an adjuster knob on the damper body. Both are adjustable while on the vehicle. Ride height is adjustable from -25mm to -55mm. The adjusters have a coarse acme form thread for ease of adjustment and the units are zinc plated to ensure they remain in good order even after considerable service. All the units are individually tested before leaving the factory and covered by a 2 year warranty. The GAZ GHA Coilover Kit for BMW 118d and 120d models retails at £536.41 plus. VAT. For further details visit the GAZ website: www.gazshocks.com

Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained from by e-mail from info@johnpaulding.com


e: enquiries@gazshocks.com t: +44 (0)1268 724585 f: +44 (0)1268 724536

PRESS RELEASE For immediate release

Follow us on FACEBOOK

Gaz Shocks Ltd Rayridge House Swinborne Road Burnt Mills Industrial Estate Basildon, Essex, SS13 1EH United Kingdom

GAZ Adjustable Telescopic Dampers for classic Land Rover

There’s good news for anyone renovating or uprating a classic Land Rover. Leading suspension specialists GAZ can now offer uprated, adjustable dampers that will fit the 107” and 109” wheelbase Series 1 (1953 - 1958), 109”/119” wheelbase Series II, IIA, IIB and III (1958 1985) and 86”/88” wheelbase Series I, II, IIA, IIB and III (1954 - 1985).

The front dampers for all the above retail at £57.58 each (plus VAT) and most rear dampers are also £57.58 each (plus VAT). The 109”/119” wheelbase rear dampers are slightly more expensive at £68.79 each (plus VAT).

The dampers are bump and rebound adjustable and can be quickly adjusted by means of an easily accessible single knob on the side of the damper. The dampers are suitable for road and off road use. The dampers feature a zinc plated body and a tough, flexible protector sleave to ensure they are adequately protected against sand, grit, water and mud. All units are individually tested before leaving the factory and covered by a 2 year warranty. For further details visit the GAZ website: www.gazshocks.com

Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained from by e-mail from info@johnpaulding.com


e: enquiries@gazshocks.com t: +44 (0)1268 724585 f: +44 (0)1268 724536

PRESS RELEASE For immediate release

Gaz Shocks Ltd Rayridge House Swinborne Road Burnt Mills Industrial Estate Basildon, Essex, SS13 1EH United Kingdom

Follow us on FACEBOOK

GAZ GP Coilovers for classic Lotus Europa

If you own one of the the increasingly rare classic Lotus Europas you’ll ne doubt be pleased to hear that GAZ can supply height and damping adjustable coilover units to suit the car’s unique suspension system.

The coilovers are suitable for road or race use and are available for the Type 74 Twin Cam (1971 75) and the older Type 47 race car and the Renault powered Series 1 / S1 (Type 46).

The units are easily adjustable on the car and feature a gas cell in the outer reservoir to prevent cavitation (foaming). The coilover units retail at £77.42 each (plus VAT).

GAZ can also supply springs for these units to the appropriate specification for their intended use. All the units are individually tested before leaving the factory and are covered by a 2 year warranty. For further details visit the GAZ website: www.gazshocks.com Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained from by e-mail from info@johnpaulding.com


AUTO Inparts Ltd. Unit L2, Cherrycourt Way, Stanbridge Road, Leighton Buzzard, Beds., LU7 4UH United Kingdom

Telephone 01525 382713

PRESS RELEASE

Green Cotton Air Filter for Ford Escort RS Turbo

Fax 01525 382718 e-mail sales@autoinparts.com

www.greenfilters.co.uk

Green High Performance Air Filters are now offering a direct replacement air filter for the Ford Escort RS Turbo 1984 - 90.

More Power - More Protection - Longer Life This performance air filter will improve air flow and filtration when compared to the original paper element air filter, providing more power, more engine protection ...and a longer service life.... The filter can be reused. Simply clean and reoil it - using the Green Service Kit - and refit it. The element is so durable, it can be washed and reused over and over again. This really is the last air filter you’ll ever need to buy for your car!

The Best Cotton Filter on the Market! Not only do Green Filters have distinct advantages over standard filters they are also superior to other cotton aftermarket filters...

WOVEN Cotton Element Unlike multi-layer gauze filters which can fray and release fibre particles into your engine, Green Filters are woven using two layers of tightly-interwoven cotton fabric. This woven element is thinner, holds oil better, and is stronger. Since its thinner, it allows better air flow without sacrificing filtration - it can trap dirt as small as 5 microns. The cross woven cotton holds the oil more evenly, and it is also much stronger. Unlike gauze, you cannot wear a hole in woven cotton by rubbing it, and there is no way small particles of cotton can detach since each is interlocked with another piece.

Reinforced with STAINLESS STEEL Green Filters are covered with a stainless steel mesh for extra strength and durability, and are therefore much more resistant to damage or collapse.

Larger Filtration Area for Better Airflow Other filters use a simple pressure moulded injection process to bond the perimeter rubber to the interior components. That method saves manufacturing time, but in the process, a considerable amount of rubber can seep onto the filtering surface. This can restrict airflow as much as 25%. Green Filters use a more precise 4 step production process which virtually eliminates seepage and maintains maximum airflow through the filter.

The Green Cotton Air Filter for the Ford Escort RS Turbo has a SRP of ÂŁ43.76 incl. VAT and is available from Auto Inparts Ltd. and other authorised Green Filter dealers. Part number P606839

For further details contact sales@autoinparts.com or visit the website: www.greenfilters.co.uk

Press Release prepared by John Paulding Associates. Photographs and other details for publication available by email: info@johnpaulding.com


Mini Spares Centre Ltd. Cranbourne Industrial Estate, Cranbourne Rd, Potters Bar, Herts EN6 3JN. United Kingdom

Telephone:- +44 1707 607700 Fax:-+44 1707 656786 e-mail:- sales@minispares.com www.minispares.com

PRESS RELEASE

Indicator/Sidelight Lens and Gaskets for classic Mini Clubman Mini Spares can now offer new indicator/ sidelight lenses for the Mini Clubman. The lenses can be ordered as BAU1796 at £22.79 inc vat (£18.99 exc vat). Gaskets to fit these lenses are also available. The gasket to fit between lens and lamp unit on the Clubman front lamp can be ordered as 37H4190 and retails at £3.00 inc vat (£2.50 exc vat).

The foam gasket that goes between the indicator/side lamp unit and front panel can be ordered as 37H4189 at £3.30 inc vat (£2.75 exc vat) and is suitable for all Clubman models. For more details contact Mini Spares on +44 1707 607700 or visit their website: www.minispares.com

Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained by e-mail from info@johnpaulding.com


Mini Spares Centre Ltd. Cranbourne Industrial Estate, Cranbourne Rd, Potters Bar, Herts EN6 3JN. United Kingdom

Telephone:- +44 1707 607700 Fax:-+44 1707 656786 e-mail:- sales@minispares.com www.minispares.com

PRESS RELEASE

Reconditioned ‘A plus’ Gearboxes for classic Minis

Need a new gearbox for your classic MIni?

Minispares now offer their own reconditioned helical tranny, ‘A plus’ gearboxes that have all new ball bearings throughout - except under 2/3rd gear which are usually reuseable and very expensive to replace.

The gearboxes come with a performance layshaft, special oil pick up pipe, diff pin etc. Any faulty gears will have been replaced. No suspect parts are re-used.

Three different ratios are available... 2.9 - (998cc Economy versions and late cars) - part number MSG30 3.1 - (Many 998cc Mini and 1275cc Carb) - part number MSG31 3.2 - (SPI 1275cc injected except MPI) - part number MSG32

The gearboxes are sold on an exchange basis and retail at £408.00 (incl. VAT) plus a £200 surcharge subject to the return of the old gearbox in a suitable condition to be rebuilt. Mini Spares Reconditioned Gearboxes are guaranteed for 6 months (parts only)

Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained by e-mail from info@johnpaulding.com


Mini Spares Centre Ltd. Cranbourne Industrial Estate, Cranbourne Rd, Potters Bar, Herts EN6 3JN. United Kingdom

Telephone:- +44 1707 607700 Fax:-+44 1707 656786 e-mail:- sales@minispares.com www.minispares.com

PRESS RELEASE

Authentic Red Oil Filler Cap for ‘A’ Series engines. Mini Spares are now stocking these plastic oil filler caps in the correct red colour as was originally fitted by Rover to top range ‘A’ series engines such as the MG and Turbo range. The Mini Spares red filler cap will also fit almost every other ‘A’ Series rocker cover including the Mini Spares FP26 range and Minispares alloy rocker covers. This improved cap has a large grip and an improved lock system to ensure a tight fit. Order as GFE6007. Price £8.16 including VAT (£6.80 exc vat for customers outside the EU).

Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained by e-mail from info@johnpaulding.com


Mini Spares Centre Ltd. Cranbourne Industrial Estate, Cranbourne Rd, Potters Bar, Herts EN6 3JN. United Kingdom

Telephone:- +44 1707 607700 Fax:-+44 1707 656786 e-mail:- sales@minispares.com www.minispares.com

PRESS RELEASE

Screw Sets for classic Mini distributors After many years of being adjusted countless times, the screws on many classic car distributors can become worn and damaged. Frequently the are lost and replaced with non standard screws. Now Mini Spares can offer replacement screw sets for Mini distributors that include all the correct fixings for the particular distributor type. For 23/25D Distributors order as 17H5106, The kit contains the screws needed to fix the condenser, points and base plate to 23/25D distributors For 45D Distributors order as 57H5135. The kit contains the screws needed to fix the condenser, points, base plate and vacuum to 45D distributors. Both kits retail at ÂŁ1.80 incl. VAT (ÂŁ1.50 exc vat for customers outside the EU).

For more details contact Mini Spares on +44 1707 607700 or visit their website: www.minispares.com

Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained by e-mail from info@johnpaulding.com


NIMBUS motorsport

Tel:-+44 (0)1377-236170

Nimbus Motorsport, 30 Main St.,Wetwang, Driffield, East Yorkshire YO25 9XJ. United Kingdom Fax:-+44 (0) 1377-236175 www.nimbusmotorsport.com

PRESS RELEASE for immediate release

Ringers Heavy Duty Glove

Specialist glove manufacturers, Ringers, have released a new, improved version of their popular Heavy Duty Glove which aims to protect wearers against the damaging effects of Impact and vibration e.g. whilst using power tools, wheel guns etc

The new glove has been designed to offer a higher degree of protection against impact with increased provision of shock absorbing material on the back of the hand, the knuckles and all fingers.

Additionally the palm of the glove incorporates a number of gel pads which are specifically designed and located to protect the user whilst not compromising either grip or flexibility.

There are further improvements to the design and fit with a new enhanced grip finger tip design and the addition of the Ringers Super Cuff design for greater comfort and flexibility. Finally the glove is now finished in a Hi Vis material for added visibility and safety in working environments.

Despite these many valuable improvements the new glove retails at the same price as the old version making it even better value for money. The price is ÂŁ29.95 + VAT (for all sizes) Available in sizes S/M/L/XL/XXL

Distributed in the UK and Europe by Nimbus Motorsport - www.nimbusmotorsport.com Telephone +44 (0)1377 236170 Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained by e-mail from info@johnpaulding.com


PRESS RELEASE for immediate release

PIPER CAMS AND EXHAUSTS Units 5 & 6 Bowles Well Gardens. Folkestone. Kent CT19 6PQ United Kingdom Telephone:- +44 1 303 245300 Fax:- +44 1 303 240666 e-mail sales@pipercams.co.uk

Piper Tuning Components for Ford Pinto SOHC Engine Just when you thought you had seen it all, Piper have just come up with an even wider range of cam profiles and components for the good ol’ SOHC Pinto 1.6/1.8 and 2.0 engines. The choice of profiles covers Mild Road, Fast Road (Carb.) and special Fast Road Injection and Ultimate Road cams for engines that have been converted to EFi and throttle bodies using a MegaSquirt or similar conversion. There are also competition profiles covering Race, Rally, Grasstrack, Hot Rod, Super Stock etc. etc. In addition Piper offer a range of components for the Pinto including uprated cam belts, valve springs and caps (VSSOHC and VDSOHCR), rockers, ball studs, oil seals, spray bars Adjustable Vernier Pulleys, Alloy Auxillary Drive Pulleys and Cometic Head Gaskets. Cam prices start at £147.00 plus VAT for a cam ground from a new chill cast blank Complete cam kits start at £252.00 plus VAT with the cam ground from a new chill cast blank. Enquiries are welcome from trade and individual engine builders. For further details contact Piper on +44 1 303 245300 or visit www.pipercams.co.uk

Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained from by e-mail from info@johnpaulding.com


PRESS RELEASE Richard Grant Mouldings Ltd Units K4/K5 Cherrycourt Way, Stanbridge Road, Leighton Buzzard, Bedfordshire, LU7 4UH United Kingdom

Telephone +44 (0) 1525 853888 Fax +44 (0)1525 383229 e-mail sales@rgmouldings.com

www.rearguards.co.uk

for BMW 5 Series F11 Touring

Most modern vehicles have painted rear bumpers that are vulnerable to damage and expensive to repaint and repair.

RGM Rearguards solve that problem. They are made from tough ABS plastic in black or silver finish. They are selfadhesive and take about ten minutes to fit. Now RGM have introduced a Rearguard for the BMW 5 Series F11 Touring 5.2010 >. This item will fit both the SE and M Sport Models.

RGM Rearguards look like a factory installed option and protect the loading area from scratches from shopping, dogs, DIY materials, sports equipment, push chairs or whatever else you choose to load into your vehicle.

RGM Rearguards will also cover existing scratches saving a fortune in repair costs.

The RGM Rearguard for the BMW 5 Series F11 Touring retails at just ÂŁ52.13 incl. VAT (Black) or ÂŁ63.34 incl. VAT (Silver) (prices exc. carriage). Available from leading car accessory retailers or directly on-line from RGM at www.rearguards.co.uk This is just one of over 300 applications currently available. For further details contact sales@rgmouldings.com or visit the website:

www.rearguards.co.uk

Press Release prepared by John Paulding Associates. Photographs and other details for publication available by email: info@johnpaulding.com


PRESS RELEASE Richard Grant Mouldings Ltd Units K4/K5 Cherrycourt Way, Stanbridge Road, Leighton Buzzard, Bedfordshire, LU7 4UH United Kingdom

Telephone +44 (0) 1525 853888 Fax +44 (0)1525 383229 e-mail sales@rgmouldings.com

www.rearguards.co.uk

for Mercedes E Class W212T Estate/Touring

Most modern vehicles have painted rear bumpers that are vulnerable to damage and expensive to repaint and repair.

RGM Rearguards solve that problem. They are made from tough ABS plastic in black or silver finish. They are selfadhesive and take about ten minutes to fit.

Now RGM have introduced a Rearguard for the Mercedes E Class W212T Estate/Touring 11.2009 >

RGM Rearguards look like a factory installed option and protect the loading area from scratches from shopping, dogs, DIY materials, sports equipment, push chairs or whatever else you choose to load into your vehicle.

RGM Rearguards will also cover existing scratches saving a fortune in repair costs.

The RGM Rearguard for the Mercedes E Class W212T Estate/Touring 11.2009 > retails at just ÂŁ49.31 incl. VAT (Black) or ÂŁ58.12 incl. VAT (Silver) (prices exc. carriage). Available from leading car accessory retailers or directly on-line from RGM at www.rearguards.co.uk

This is just one of over 300 applications currently available. For further details contact sales@rgmouldings.com or visit the website:

www.rearguards.co.uk

Press Release prepared by John Paulding Associates. Photographs and other details for publication available by email: info@johnpaulding.com


PRESS RELEASE Richard Grant Mouldings Ltd Units K4/K5 Cherrycourt Way, Stanbridge Road, Leighton Buzzard, Bedfordshire, LU7 4UH United Kingdom

Telephone +44 (0) 1525 853888 Fax +44 (0)1525 383229 e-mail sales@rgmouldings.com

www.rearguards.co.uk

for new Mini Countryman

Most modern vehicles have painted rear bumpers that are vulnerable to damage and expensive to repaint and repair.

RGM Rearguards solve that problem. They are made from tough ABS plastic in black or silver finish. They are selfadhesive and take about ten minutes to fit.

Now RGM have introduced a Rearguard for the New Mini Countryman 9.2010 >.

RGM Rearguards look like a factory installed option and protect the loading area from scratches from shopping, dogs, DIY materials, sports equipment, push chairs or whatever else you choose to load into your vehicle. RGM Rearguards will also cover existing scratches saving a fortune in repair costs.

The RGM Rearguard for the New Mini Countryman 9.2010 > retails at just ÂŁ44.09 incl. VAT (Black) or ÂŁ52.86 incl. VAT (Silver) (prices exc. carriage).

Available from leading car accessory retailers or directly on-line from RGM at www.rearguards.co.uk

This is just one of over 300 applications currently available. For further details contact sales@rgmouldings.com or visit the website:

www.rearguards.co.uk

Press Release prepared by John Paulding Associates. Photographs and other details for publication available by email: info@johnpaulding.com


PRESS RELEASE for immediate release

Titan Motorsports, 11370 Boggy Creek Rd. Orlando, Florida 32824 United States of America Close to Orlando Tel: +1 407 277-8423 International Airport Fax: +1 407 277-8525 Info@titanmotorsports.com

Haltech Engine Management Systems

Titan Motorsports, in Orlando Florida, knows a thing or two about engine management, and has been an international distributor of Australia’s Haltech engine management systems for the past 2 years.

Haltech makes a variety of engine management and data logging products that are used on cars, motor cycles, off-road vehicles, boats, jet skis, outboards, snowmobiles, karts, motor homes, and even aircraft.

Haltech’s Platinum Sport 1000 series is an ECU that is capable of controlling sequential fuel and ignition on 4 cylinder conventional engines and 2 rotor Wankel applications (semi-sequential on 6 and 8 cylinders).With 8 Channels capable of controlling injection and ignition duties, the Platinum Sport 1000 supports modern engines with multi-coil ignition systems, as well as conventional distributor systems.

For larger engines up to 8 cylinders and rotary engines with 2 & 3 rotors the Haltech 14 Channel Platinum Sport 2000 is also available. In addition, Titan and Haltech offer a variety of Pro Series Platinum ECU’s that are a direct plug in for many popular applications.

With prices that start at just $1600.00 (US), it looks like that other Australian engine management system has some serious competition.

Titan Motorsports are European export experts and the distance poses no problem... Order directly on-line at..... www.titanmotorsports.com Check out our website or give us a call on 00 1 407 277 8423 (Eastern Time - GMT+5hrs)

Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained by e-mail from info@johnpaulding.com


Unit 9 Rodenhurst Business Park, Roden - Shrewsbury, SY4 4QU www.viper-performance.co.uk

Viper Alloy Tee Pieces

PRESS RELEASE

0845 0953 423

for immediate release

If you ever need to add a sensor, sender, breather pipe or dump valve to an existing hose run, Viper-Performance now have a great range of alloy tee pieces to enable you to do the job in minutes.

These alloy Tee Pieces are made from 6063 T6 aerospace grade aluminium that can be welded easily if required. The main pipe is 100 mm long (4”) and has a wall thickness of 5mm. The Tee piece is CNC machined and TIG welded in place. Then the whole assembly is polished to a mirror finish. The pipes feature bevelled ends for secure hose clamping. Various diameters from 38mm up to 76mm are available for the main pipe and 16mm to 25mm for the take off. Prices range from £19.99 to £28.99 including VAT.

Viper Tee Pieces make a great partner for their silicone hose range and Viper can also supply stainless steel hose clamps at highly competitve prices.

Order online at www.viper-performance.co.uk or telephone 0845 0953 423.

Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained from by e-mail from info@johnpaulding.com


Unit 9 Rodenhurst Business Park, Roden - Shrewsbury, SY4 4QU www.viper-performance.co.uk

Viper Weld On Alloy Bosses

PRESS RELEASE

0845 0953 423

for immediate release

If you have the ability to weld, Viper Performance are now offering a range of weld on alloy bosses to enable you to add breathers, air take offs and nipples to an existing aluminum pipe. The alloy take offs are available in a number of outer diameters.

They are CNC machined with fish tail design flanges to reliably secure any type of hose on to the take off.

Viper take off bosses are supplied with a mirror finish.

A selection of sizes are available to fit hoses with an internal diameter from 10mm up to 22mm.

Prices start at ÂŁ6.98 and range up to ÂŁ9.98. Prices include VAT. Order online at www.viper-performance.co.uk or telephone 0845 0953 423.

Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained from by e-mail from info@johnpaulding.com


Unit 9 Rodenhurst Business Park, Roden - Shrewsbury, SY4 4QU www.viper-performance.co.uk

Viper End Fitting for Braided Hoses

PRESS RELEASE

0845 0953 423

for immediate release

To go with their recently released stainless steel braided hose, Viper Performance now have a range of end fittings.

The fittings are also suitable for Viper’s nylon braided hoses and other manufacturer's 200 type hoses.

The fittings are re-usable, and made from high quality alloy, precision CNC and finished in quality anodised traditional Blue and Red colours.

The fittings are sold in AN-(dash) sizes from -06 to -12 sizes and are available as Straight swivel, 45°, 90° and 120° Angle Hose Fittings. Prices range from £8.50 up to £29.99. Prices include VAT.

Order online at www.viper-performance.co.uk or telephone 0845 0953 423.

Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained from by e-mail from info@johnpaulding.com


WEBCON UK LTD Dolphin Road Sunbury, Middlesex TW16 7HE. United Kingdom Telephone: +44 (0) 1932 787100 Fax: +44 (0) 1932 782725 Global leaders in Engine Fuelling and Ignition Systems, Solutions and Spare Parts. Email for Sales enquiries sales@webcon.co.uk For Alpha technical enquiries alpha@webcon.co.uk For technical enquiries technical@webcon.co.uk

PRESS RELEASE For immediate release

Performance Air Filter

for Weber ICH and ICT Caburettors

With so many ‘performance’ air filters on the market, how do you chose the most suitable for your carburettor?

Now Webcon have produced their very own performance Air Filter, specifically designed and produced for use with Weber ICH and ICT carburettors.

The filter element follows the proven formula of cotton gauze with metal reinforcement for maximum flow with minimal restriction.The body is manufactured from a resiliant rubber ensuring that it will not rust or cause damage if it comes into contact with underbonnet metalwork.

The filter area is 40mm height and 130mm diameter and the neck diameter is 52mm. The filter comes complete with mounting clamp and can be ordered as part number AFB395. Retail price is £32.96 + VAT.

Available directly from Webcon and from appointed Webcon dealers around the world. For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained by e-mail from info@johnpaulding.com


WEBCON UK LTD Dolphin Road Sunbury, Middlesex TW16 7HE. United Kingdom Telephone: +44 (0) 1932 787100 Fax: +44 (0) 1932 782725 Global leaders in Engine Fuelling and Ignition Systems, Solutions and Spare Parts. Email for Sales enquiries sales@webcon.co.uk For Alpha technical enquiries alpha@webcon.co.uk For technical enquiries technical@webcon.co.uk

PRESS RELEASE For immediate release

Webcon 20mm Mounting Block

Webcon have just released a 20mm high mounting block / insulator to suit Weber DGV/DGAV/DGEV and DCD carburettors.

The block is supplied with 2 gaskets.

Order as part number 9900512000. Retail price ÂŁ10.95 plus vat

Available directly from Webcon and from appointed Webcon dealers around the world.

For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained by e-mail from info@johnpaulding.com


WEBCON UK LTD Dolphin Road Sunbury, Middlesex TW16 7HE. United Kingdom Telephone: +44 (0) 1932 787100 Fax: +44 (0) 1932 782725 Global leaders in Engine Fuelling and Ignition Systems, Solutions and Spare Parts. Email for Sales enquiries sales@webcon.co.uk For Alpha technical enquiries alpha@webcon.co.uk For technical enquiries technical@webcon.co.uk

PRESS RELEASE For immediate release

Triple Weber DCNF Carburettor Manifold for Ford V6 Cologne

Webcon can now offer a new manifold to enable triple Weber 40DCNF carburettors to the popular Ford V6 2.3 and 2.8 Cologne engines.

Order as part number MM4476. Retail price ÂŁ595 plus vat.

Available directly from Webcon and from appointed Webcon dealers around the world.

For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk

Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained by e-mail from info@johnpaulding.com


WEBCON UK LTD Dolphin Road Sunbury, Middlesex TW16 7HE. United Kingdom Telephone: +44 (0) 1932 787100 Fax: +44 (0) 1932 782725 Global leaders in Engine Fuelling and Ignition Systems, Solutions and Spare Parts. Email for Sales enquiries sales@webcon.co.uk For Alpha technical enquiries alpha@webcon.co.uk For technical enquiries technical@webcon.co.uk

PRESS RELEASE For immediate release

Weber Tuning Manual

At one time every motor engineer learnt carburettor tuning as part of their apprenticeship, but now in a world of laptops, EFi and re-maps this has become a lost art.

Well many of the tuners may have retired but the knowledge hasn’t gone forever - Webcon have just released the latest edition of the Weber Tuning Manual.

The definitive Weber publication covering much of the theory behind carburettor operation. It’s also backed up with fully calibrated parts lists and exploded diagrams to help you order and install the correct parts.

Want to know how to do a fuel level hydraulic check on a 48 IDA carburettor? How to set up throttle linkages for multiple carbs.? How to select the right emulsion tube for a particular intended use? It’s all right there in easy to understand text and clear diagrams.

The Weber Tuning Manual can be ordered as part number 9500005400. ...and all this knowledge comes to you at just £14.95 (zero rate vat)

Available directly from Webcon and from appointed Webcon dealers around the world.

For further details contact Webcon UK on +44 (0)1932 787100 or visit www.webcon.co.uk Press Release prepared by John Paulding Associates. Photographs and other details for publication may be obtained by e-mail from info@johnpaulding.com

Update September 2011  
Update September 2011  

The latest products form the tuning and classic car market - Sept. 2011

Advertisement