Page 1

Lofts

Module 02 - Task 01

1.1

1.2

1.3

{6,-21,150} {-46,-23,150}

{150,0,150}

{-38,-62,150}

{-18,16,0}

{-36,-95,0}

{0,50,150}

{150,-50,0}

{-16,16,0}

{0,0,0}

John Hunter- 911742

Paneling Grid & Attractor Point

2.1

Attractor / Control Curves

{150,20,0}

{150,0,0}

{99,-161,0} {46,-152,0}

Attractor / Control Points (X,Y,Z)

{0,-60,150} {0,0,150}

{150,150,150}

{118,-77,150}

{60,-131,150}

{0,0,0}

Grid Points

{123,-118,150} {19,0,0}

{80,-193,0.}

{150,-80,150} {150,-10,150}

{0,150,150}

{-49,-17,150}

{106,-149,150}

Key

1.4

{0,-70,0}

{0,50,0}

{0,0,0}

{108,-100,0}

2.2

2.3

2.4

{6,-21,150}

{118,-77,150} {150,150,150} {0,50,150}

{-18,16,0}

{80,-193,0.}

{62,40,78}

{99,-161,0} {0,0,0}

{0,50,0}

{Attractor Curve Location}

{Attractor Curve Location}

{Attractor Point Location}

3.1

3.2

3.3

3.4

Paneling

{Attractor Point Location, }

Design Matrix 1:5

Varying openings gives the opportunity for different amounts of light to enter. Additionally, this gives a choice for how much privacy is desired.

The triangular points creates an enclosed area, both to the side and from above, while the perforation in contrast opens up the space.

Perforations increase in size at panels that come out further on the surface.

Open space for further possible structure.

Exploded Axonometric 1:1 0

20

60mm


Grid Manipulation

Module 02 - Task 02

1.1

1.2

1.3

Key

1.4

{0,0,0}

Attractor / Control Curves Grid Points {168.016,-113.159,0} {150,0,0}

{150,0,0}

{150,150,0}

{0,0,0}

Scaling

John Hunter-911742

{Point Attractor}

{Curve Attractor, Random Attractor}

{Point Attractor}

{-21.534,-48.785,0}

{Curve Attractor}

2.1

2.2

2.3

2.4

{Attractor Point Location}

{Attractor Point Location}

{Attractor Point Location}

{Index Selection}

3.1

3.2

3.3

3.4

Design Matrix 1:5

Most of the cube has been booleaned out with spheres, creating a large space covered by what is left of the cube at the top. A single support provides more space at ground level while keeping a large overhang for shelter.

Areas where the solids are above and below create openings that could define the privacy of a threshold.

The solids that remain create possible areas for use when looking at the negative space.

The circular shape of the structure, creates a sense of enclosure and privacy.

Axonometric 1:1 Solid boolean using 3.2 morph itteration. 0

Attractor / Control Points (X,Y,Z)

20

60mm

M2 Matrix  
M2 Matrix  
Advertisement