Issuu on Google+

ll ll l l l l ll l l l ll ll l l l ll ll ll ll l l

l ll ll l ll ll l l ll lll ll l lll lllllll

ll ll l ll l l l l l l l l l l l l lll llllllll

HEHEELEL WW

DDE EAAL L

ll ll ll ll ll ll l l ll ll ll ll ll ll lll l l l

• Air Tools • Tyre Valves • Valve Tools • Wheel Weights • OE • Tyre Repair • Patches • Chemicals • Repair Tools • Accessories • Tyre Mounting • Fitting Accessories • Bead Paste • Tyre Changers • Wheel Balancers • Wheel Balancer Packages • Hand Tools • Wheel Alignment Equipment • Compressors • Nitrogen Equipment • Two Post Lifts • Mid Rise Scissor • Special Offers

equipped to assist

Tech


Here is a guide to your 'Wheel Deal' tyre/garage equipment store. Each room is colour coded to help you find the right tool for the job! Go ahead and browse our store!

Tyre Valve Room • Tyre Valves • Valve Tools

Wheel Deal Room

Wheel Weight Room

• Special Offers Clearance Room

• Wheel Weights • OE • Drivemaster

Tyre Repair Room • Tyre Repair • Chemicals • Patches

Hand Tools Room • Hand Tools

ROOM CONTENTS

Tyre Valve Room Wheel Weight Room Tyre Repair Room Repair Tools Room Tyre Mounting Room Changer & Balancer Room Alignment Room Compressor Room Air Tools Room Lift Room Hand Tools Room Wheel Deal Room

Lift Room • Two Post Lifts • Mid Rise Scissor

Air Tools Room • Air Tools

pg.

3 4 pg. 5 pg. 6 pg. 7 pg. 8-9 pg. 10 pg. 11 pg. 12 pg. 13 pg. 14 pg. 15 pg.

Repair Tools Room • Repair Tools • Accessories

Tyre Mounting Room • Tyre Mounting • Fitting Accessories • Bead Paste

Compressor Room • Compressors • Nitrogen Equipment

Changer & Balancer Room Alignment Room

• Tyre Changers • Wheel Balancers • Wheel Balancer Packages

• Wheel Alignment Equipment

Make sure you keep an eye out for our 'Special Offers' in each room. Just look for the 'Wheel Deal' stamp...

Who says we can't re-invent the wheel!


Ty re Va lv e

Tubeless Valves (Snap-In)

Generally used for passenger car, trailers and light trucks. For use to 65 PSI / 4.5 Bar cold inflation pressure maximum. Recommended maximum rim thickness at rim hole is .156” / 4 mm.

Part No H412 H413 H414 H418 H412 H413

H414

H414, ONLY

£9.95

Description TR412 TUBELESS VALVE - MOTORCYCLE TR413 TUBELESS VALVE TR414 TUBELESS VALVE TR418 TUBELESS VALVE - LONG

Qty 100 100 100 100

Ro om

Price £15.95 £10.25 £9.95 £11.95

H418

Tubeless Valves (Snap-In) - for Motorcycles and Scooters Part No Description H52-0944 SNAP-IN VALVE TR412 BASE 90DEG BEND

Qty Price 1 £0.85

H52-0944

Snap-in Tubeless Valves for High Pressure Application Ideal for light trucks For use to 100 PSI / 6.9 Bar cold inflation pressure maximum Recommended maximum rim thickness at rim hole is .205” / 5.2 mm. Part No HE600R

Description Qty Price HIGH PRESSURE SNAP - IN LIGHT COMMERCIAL VALVE - (TRANSIT) 1 £0.75 HV2B

HE600R

Valve Extensions - Plastic/Double Check - Metal Part No HV2B

Description VALVE EXTENSION - DOUBLE CHECK - 19MM

Qty Price 100 £41.95

H660, ONLY

£1.25

Valve Caps/Rim Ferrule

H660

H52

Part No H660 H52

Description PLASTIC VALVE DUST CAP - BLACK LIGHT METAL DOME VALVE CAP

Qty Price 100 £1.25 100 £5.35

Valve Core

1 - Pin, 2 - Swivel Plug, 3 - Plug, 4 - Plug Gasket, 5 - Plunger Gasket, 6 - Plunger Cup, 7 - Spring, 7 - Spring Cup Part No H8500

H8500

Description STANDARD BORE VALVE CORE - SHORT

Qty Price 100 £8.95

Valve Tools Part No H2688 H993 H676A H992 H673B

Description PLASTIC HANDLED VALVE CORE SCREWDRIVER - STANDARD PLASTIC SCREW-ON VALVE MOUNTING TOOL - LEVER TYPE IDEAL FOR PREVENTING ALLOY WHEEL DAMAGE VALVE REPAIR TOOL 4-WAY METAL SCREW-ON VALVE MOUNTING TOOL - LEVER TYPE PLASTIC HANDLED VALVE CORE SCREWDRIVER - STANDARD & LARGE BORE

H993

) 0845 602 3436 8 www.ap-tech.co.uk

Qty Price 1 £0.99 1 £5.45 1 1 1

£0.95 £4.25 £1.75

H992

* aptech@andrewpage.com

H676A H673B

H2688

Pg.

3


m oo R ht eig W el e h W

Part No ST05 ST10 ST15 ST20 ST25 ST30 ST35 ST40 ST45 ST50

Trax OE Quality Steel Wheel Weights

Description ZINC UNIVERSAL "EURO" WEIGHT - 5GM ZINC UNIVERSAL "EURO" WEIGHT - 10GM ZINC UNIVERSAL "EURO" WEIGHT - 15GM ZINC UNIVERSAL "EURO" WEIGHT - 20GM ZINC UNIVERSAL "EURO" WEIGHT - 25GM ZINC UNIVERSAL "EURO" WEIGHT - 30GM ZINC UNIVERSAL "EURO" WEIGHT - 35GM ZINC UNIVERSAL "EURO" WEIGHT - 40GM ZINC UNIVERSAL "EURO" WEIGHT - 45GM ZINC UNIVERSAL "EURO" WEIGHT - 50GM

Drivemaster Steel Wheel Weights Part No HCCSW05 HCCSW10 HCCSW15 HCCSW20 HCCSW25 HCCSW30 HCCSW35 HCCSW40 HCCSW45 HCCSW50

Description ZN UNIVERSAL STEEL WHEEL WEIGHT - COATED - 5G ZN UNIVERSAL STEEL WHEEL WEIGHT - COATED - 10G ZN UNIVERSAL STEEL WHEEL WEIGHT - COATED - 15G ZN UNIVERSAL STEEL WHEEL WEIGHT - COATED - 20G ZN UNIVERSAL STEEL WHEEL WEIGHT - COATED - 25G ZN UNIVERSAL STEEL WHEEL WEIGHT - COATED - 30G ZN UNIVERSAL STEEL WHEEL WEIGHT - COATED - 35G ZN UNIVERSAL STEEL WHEEL WEIGHT - COATED - 40G ZN UNIVERSAL STEEL WHEEL WEIGHT - COATED - 45G ZN UNIVERSAL STEEL WHEEL WEIGHT - COATED - 50G

Part No AU05 AU10 AU15 AU20 AU25 AU30 AU35 AU40 AU45 AU50

Qty 100 100 100 100 100 100 50 50 50 50

Price £4.95 £5.95 £9.95 £11.95 £13.95 £16.95 £9.95 £10.95 £12.95 £13.95

Price £9.25 £10.75 £13.25 £15.25 £16.99 £19.50 £11.25 £12.65 £14.25 £15.50

HCCSW05, ONLY

£4.95

Trax OE Quality Alloy Wheel Weights

Description ZINC ALLOY WHEEL WEIGHT 610 - 5GM ZINC ALLOY WHEEL WEIGHT 610 - 10GM ZINC ALLOY WHEEL WEIGHT 610 - 15GM ZINC ALLOY WHEEL WEIGHT 610 - 20GM ZINC ALLOY WHEEL WEIGHT 610 - 25GM ZINC ALLOY WHEEL WEIGHT 610 - 30GM ZINC ALLOY WHEEL WEIGHT 610 - 35GM ZINC ALLOY WHEEL WEIGHT 610 - 40GM ZINC ALLOY WHEEL WEIGHT 610 - 45GM ZINC ALLOY WHEEL WEIGHT 610 - 50GM

Drivemaster Alloy Wheel Weights Part No HCCAW05 HCCAW10 HCCAW15 HCCAW20 HCCAW25 HCCAW30 HCCAW35 HCCAW40 HCCAW45 HCCAW50 200-KIT 326C-KIT TINBLUE SSADH HSAW100

Qty 100 100 100 100 100 100 50 50 50 50

Description ZN UNIVERSAL ALLOY WHEEL WEIGHT - COATED - 5G ZN UNIVERSAL ALLOY WHEEL WEIGHT - COATED - 10G ZN UNIVERSAL ALLOY WHEEL WEIGHT - COATED - 15G ZN UNIVERSAL ALLOY WHEEL WEIGHT - COATED - 20G ZN UNIVERSAL ALLOY WHEEL WEIGHT - COATED - 25G ZN UNIVERSAL ALLOY WHEEL WEIGHT - COATED - 30G ZN UNIVERSAL ALLOY WHEEL WEIGHT - COATED - 35G ZN UNIVERSAL ALLOY WHEEL WEIGHT - COATED - 40G ZN UNIVERSAL ALLOY WHEEL WEIGHT - COATED - 45G ZN UNIVERSAL ALLOY WHEEL WEIGHT - COATED - 50G ZINC UNIVERSAL "EURO" WEIGHT - ASSORTMENT ZINC ALLOY COATED WEIGHT - 326C - ASSORTMENT TIN ADHESIVE STRIP 45G - TYPE 631 STEEL ADHESIVE STRIP 60G - COATED 3KG STEEL ADHESIVE STRIP 60G - COATED 6KG

Qty 100 100 100 100 100 100 50 50 50 50

Qty 100 100 100 100 100 100 50 50 50 50 1 1 100 50 100

Price £4.95 £5.95 £9.95 £11.95 £13.95 £16.95 £9.95 £10.95 £12.95 £13.95 £19.95 £26.75 £71.50 £11.95 £16.95

Price £11.95 £14.85 £16.25 £18.25 £19.95 £21.75 £11.95 £13.50 £15.25 £16.95

HCCAW10, ONLY

£5.95

Pg.

4

) 0845 602 3436 8 www.ap-tech.co.uk

* aptech@andrewpage.com


Ty re Re pa ir Ro om

Prema Combi Repairs

PREMA Combi Repairs can be used for crown injuries only. Prepare the injury using the appropriate PREMA Carbide Cutter. The PREMA Combi Repair comes with a guide wire, fills and seals the injury and repairs the innerliner all in one easy step. Install with PREMA Ultra Fast Dry Vulcanising Cement. NOTE: The Prema Combi may only be used when the angle of the injury is LESS THAN 25°. If the injury angle is GREATER THAN 25°, repair with the appropriate two-piece stem and repair unit. Part No HPUS-2 HPC-1 HPC-1.5 HPC-2J HVL-PC2 HEC2-40 HPC-3J HPC-4

HPUS-2, ONLY

Description UNIVERSAL SQUARE 2, APPROX. 43 MM X 43 MM COMBI 1, 3 MM STEM FOR UP TO 1.5 MM INJURY - DIPPED STEM COMBI 1, 3 MM STEM FOR 1,5-3 MM INJURY - DIPPED STEM COMBI 2, 6 MM STEM FOR 4-6 MM INJURY (JUMBO PACK) GUM ON STEM COMBI 2, 6 MM STEM FOR 4-6 MM INJURY (JUMBO PACK) DIPPED STEM ECO COMBI 2, 6 MM STEM FOR 4-6 MM INJURY (JUMBO PACK) GUM ON STEM COMBI 3, 8 MM STEM FOR 6-8 MM INJURY (JUMBO PACK) COMBI 4, 10 MM STEM FOR 10 MM INJURY

Qty 100 40 40 40 40 40 20 10

Price £16.95 £24.25 £26.50 £26.95 £24.25 £19.95 £20.25 £21.55

£16.95

ATV Kit Premium

Contents Include: One Each Split Eye Insert Tool, Reamer Tool, Rubber Cement (Tube), Microflate Inflator, Two Each CO2 Cartridges, and Eight Each PI-1 2” Round Inserts. All items come in a nylon zippered bag. Part No HPATVP

Description ATV KIT PREMIUM WITH CO2 CARTRIDGE

Qty Price 1 £20.95

Part No HPFC-8

Description ULTRA FAST DRY VULCANISING CEMENT 237 ML

Qty Price 1 £3.95

Part No Description HPBSO-32 BEAD SEALER 946ML - FOR SEALING BEAD LEAKS ON IMPERFECT RIMS

Qty Price 1 £6.95

Pre-Buff Cleaner

PREMA Pre-Buff Cleaner is formulated to remove contaminants and silicone from the innerliner of the tyre prior to buffing. Contains no ozone depleting chemicals. Part No HRC1 HRCA

Description PRE BUFF CLEANER 1000 ML - FOR USE PRIOR TO BUFFING OF REPAIR AREA PRE BUFF CLEANER AEROSOL 500 ML - FOR USE PRIOR TO BUFFING OF REPAIR AREA

Black Vulc

£3.00

Use dusting chalk when repairing or changing tube type tyres. Helps prevent tubes from sticking, chaffing and pinching. Qty Price 1 £8.99

Part No HWHITE HMCH HFCH

Inserts and Penetration Fillers Part No H12BOOTLACE HBOOTLACE HVL-362

1

Dusting Chalk and Marking Crayons

PREMA Black Vulc Cement is designed for use in HEAT CURE applications with Rope Rubber and Cushion Gum. Contains no ozone depleting chemicals. Part No Description HLINER INNERLINER OVERBUFF SEALANT 500 ML

Qty Price 1 £3.50

Description NARROW BLACK STRING 12 ", 50 STRINGS NARROW BLACK STRING 7", 150 STRINGS STRING TRUCK 200 MM, 30 STRINGS

Description TYRE MARKING CRAYON - WHITE TYRE MARKING CRAYON - YELLOW DUSTING CHALK FOR TUBE REPAIRS

Qty 1 1 1

Qty 1 1 1

Price £6.95 £6.95 £2.35

Price £19.95 £25.95 £9.95

Pg.

) 0845 602 3436 8 www.ap-tech.co.uk

* aptech@andrewpage.com

5


r ai p Re

m oo R s ol o T

Carbide Cutters Part No HCC3 HCC6 HCC8

Description CARBIDE CUTTER 3MM - FOR THE PREPARATION OF INJURY CHANNEL PRIOR TO REPAIR WITH COMBI CARBIDE CUTTER 6MM - FOR THE PREPARATION OF INJURY CHANNEL PRIOR TO REPAIR WITH COMBI CARBIDE CUTTER 8MM - FOR THE PREPARATION OF INJURY CHANNEL PRIOR TO REPAIR WITH COMBI

Qty Price 1 £14.25 1

£17.95

1

£27.95

Buffing Tools Part No HGOLF HBCONE HFLAP

Description GOLF BALL SHAPED MUSSEL STONE FOR PREPARATION OF INNERLINER PRIOR TO REPAIR CONTOUR WHEEL (BRONZE) FOR PREPARATION OF INNERLINER PRIOR TO REPAIR FLAP WHEEL 60*30MM 80GRIT - 6MM SHAFT

Qty Price 1 £5.50 1

£6.55

1

£2.65

HGOLF

HBCONE

HFLAP

Hand Tools for Tyre Repair

HSCRAPER HPROBE HSTITCH HSPID

Part No HPROBE HSCRAPER HSTITCH HSPID

Description TYRE PRODDER/ PROBE FOR ASSESSING INJURIES RUBBER SCRAPER - HOE TYPE FOR THE PREPARATION OF REPAIR AREA PATCH ROLLER/ STITCHER - ECONOMY TYPE SCRATCH BRUSH CURVED IDEAL FOR BRAKE AND WHEEL CLEANING

Qty Price 1 £2.45 1 £3.95 1 1

£3.75 £2.95

PISTOL GRIPS

Inserting Tools Part No HCORDAPP HPG112 HPG113

Description CLOSED EYE NEEDLE 3" LONG SCREWDRIVER HANDLE OPEN EYE NEEDLE 3" LONG PISTOL GRIP HANDLE OPEN EYE NEEDLE 6" LONG PISTOL GRIP HANDLE

Qty Price 1 £3.75 1 £3.95 1 £7.25

Tyre Baths

For identifying the location of punctures or bead leaks in car tyres or inner tubes. Part No HBATH

HBATH, ONLY

£51.95

Description Qty Price £51.95 TYRE TESTING BATH - DIAMETER 820MM - DEPTH 650MM 1

Tyre Spreaders

Tyre Spreaders for the inspection and repair of car and light truck tyres. Part No HTTS2

Description BENCH MOUNT TYRE SPREADER/ TUBE CLAMP

Qty Price 1 £37.95

Pg.

6

) 0845 602 3436 8 www.ap-tech.co.uk

* aptech@andrewpage.com


Ty re Mo un tin g

Tyre Mounting Lubricants Euro Paste

PREMA Euro Paste is the ultimate Tyre-mounting compound. Helps eliminate rim slippage, reduces bead damage, and yields approximately 400 tyre changes per 7.7 lbs (3.5 kg) pail. Does not freeze or harden.

HPASTE HPASTE, ONLY

£4.95

Ro om

HPABR

Part No HPASTE HPABR

Description UNIVERSAL MOUNTING PASTE WHITE - 5KG ECONOMY PLASTIC HANDLED MOUNTING LUBRICANT BRUSH

Qty Price 1 £4.95 1 £1.95

Bead Sealer

PREMA Bead Sealer provides a seal between the bead area of the tyre and rim, assisting in the prevention of leaks caused by minor surface imperfections. Part No HGLL5 HRIMTITE

HRIMTITE

Description GREEN DILUTABLE LIQUID BEAD LUBRICANT - 5LTR WHEEL SEAL FOR POROUS ALLOY WHEELS AND CORRODED STEEL RIMS - 5KG

Qty Price 1 £4.95 1 £19.95

Tyre Levers

Superior Levers and Alloy Wheel Protection Part No HCHROME20 HCHROME24 HAWPRO HSLEEVE

Description TYRE LEVER - LENGTH 20" - FLAT - CHROME VANDIUM (FOR USE WITH TYRE CHANGING MACHINE) TYRE LEVER - LENGTH 24" - FLAT - CHROME VANDIUM (FOR USE WITH TYRE CHANGING MACHINE) ALLOY WHEEL PROTECTOR (9999008) PLASTIC SLEEVE TO FIT CHROME LEVERS PROTECTS ALLOY WHEELS FROM DAMAGE

Qty Price 1 £19.95 1

£24.95

1 1

£6.95 £4.50

HCHROME20, ONLY

£19.95 HCHROME20 HCHROME24

HSLEEVE

HAWPRO

Plastic Alloy Wheel Protection

Plastic alloy wheel protection is available for most makes and models of tyre changers. Please contact AP-Tech on 0845 602 3436 with your machine make and model number. Pg.

) 0845 602 3436 8 www.ap-tech.co.uk

* aptech@andrewpage.com

7


& er g an h C

m oo R r ce n la Fully Automatic Ba

Fully Automatic Tyre Changer with Assist Arm

Tyre Changer

• Capacity 0 - 20” wheels clamped on the outside 12” - 23” clamped on the inside • Standard fitting includes air filter / regulator / oiler and tyre inflator with pressure gauge • Includes tyre lever, alloy wheel protection kit & soap bucket • Operating pressure 8-10 bar (116-145 psi) • Tilt column action SEE PAGE 15 FOR assist arm available

The addition of the assist arm to the automatic tyre changer allows the independent & MOT workshop to make easy work of changing low profile tyres. • Operating pressure 8-10 bar (116-145 psi)

PACKAGE DEALS

Part No: WC5201AA

Part No: WC5201

LEASE FROM £6.57 PER WEEK

LEASE FROM £9.93 PER WEEK

LEASE FROM £15.53 PER WEEK

Part No: ECOMOUNT22R

Part No: ECOMOUNT11R

ECOMOUNT 22R

ECOMOUNT 11R

LEASE FROM £13.39 PER WEEK

LEASE FROM £11.78 PER WEEK

£1850

SPECIAL OFFERS

PAGE 15

• Heavy duty tyre changer • Space saving design • Clamps up to 24” rims • Run-Flat capable • Complete alloy protection system Part No: MOUNT301/12VR

£2195

SPECIAL OFFER

SPECIAL OFFER

LEASE FROM £17.68 PER WEEK

LEASE FROM £26.80 PER WEEK

LEASE FROM £27.20 PER WEEK

AUTOMATIC RACING WITH LEVER

AUTO EVOLUTION LEVERLESS

AUTO EVOLUTION LEVERLESS QUICK RELEASE HEAD

£3295 £4995 £5125

• Precision pneumatic locking of operating arm • Tilting column allowing easier access • Supplied with free alloy rim protection kit • Supplied with Technoroller & helper arm • Suitable for wider wheels

LEASE FROM £17.04 PER WEEK

LEASE FROM £14.46 PER WEEK

£2695

• The UK’s best selling high performance tyre changer • Extra heavy duty tyre changer • Features revolutionary QuadraClamp turntable • Clamps up to 26” rims • Demo DVD available • Run-Flat capable

NO LEVER REQUIRED !

SPECIAL OFFERS

PAGE 15

Part No: MOUNT701XL SPECIAL OFFER

£4995

LEASE FROM £26.80 PER WEEK

Low Profile Tyre Changer with Technoroller & Helper Arm & Automatic Lever System • Technoroller and helper arm attachments • Performance automatic tyre changer • Suitable for run flat and ultra high performance tyres • Automatic demounting system • No need to even use bead lever Part No: NA524TH/RACING/ALS

SPECIAL OFFER LEASE FROM £9.93 PER WEEK

LEASE FROM £18.02 PER WEEK

Megamount 701XL

Without helper arm & Technoroller Part No: AL 518

£3175 £1850

SPECIAL OFFER

12 VOLT VERSION

Part No: Part No: MOUNT502E-LL MOUNT502E-LLQR

SPECIAL OFFER

Part No: MOUNT301R

SPECIAL OFFER

£3395

SEE PAGE 15 FOR PACKAGE DEALS

• Lever-less, super automatic tyre changer • Automatic ‘finger’ fits and removes the tyre • Also available in traditional lever-style • Includes ‘megafit 2’ arm for run-flat capability • 10” to 24” rim clamping • Includes storage for tools, valves etc • On-site demonstration available

Automatic Tyre Changer

£2895

Megamount 301 Racing

Megamount 502 Racing/Evolution

SPECIAL OFFER

Part No: WC5201RM SPECIAL OFFER

• Fully-automatic tyre changer • 10” to 24” Rim clamping • Run-flat capable • ‘Eco’ range ideal for garages. MOT stations and lower volume users • Swing arm ‘space saver’ version also available (ecomount 11R, as below)

Part No: AL 518/TH

SEE PAGE 15 FOR PACKAGE DEALS

SPECIAL OFFER

Ecomount 22 Racing

Part No: MOUNT502R

• Racing automatic tyre machine up to 24” alloy wheels • Double assist arm and roller • Two position bead breaker • 10” - 24” Wheels clamped on outside of rim • 12” - 26” Wheels clamped on inside of rim • Plastic inserts in foot to help protect alloy rims • 3 phase

SPECIAL OFFER

£1225

£2495

Tyre Changers Racing Auto Tyre Changer

SEE PAGE 15 FOR PACKAGE DEALS

SPECIAL OFFER

£5195

LEASE FROM £27.87 PER WEEK

Pg.

8

) 0845 602 3436 8 www.ap-tech.co.uk

* aptech@andrewpage.com


Tyre Balancers Electronic Wheel Balancer

Ecospin 150

Part No: WC5521

Part No: ECOSPIN150

• Delivery, installation & basic training included • Computerised wheel balancer is a motorised machine designed for the budget tyre shop and service workshop • Rim width measuring calliper • Wheel weight pliers / hammer • 4 x Standard cones

Ch an ge r&

• Motorised wheel balancer • Behind spoke balancing mode • 100% Made in Italy • Eco-drive technology eliminates need for guard (note: hood optional) • 3 year PCB warranty

SPECIAL OFFER

SPECIAL OFFER

£1495

SPECIAL OFFERS

PAGE 15

LEASE FROM £8.02 PER WEEK

Megaspin 200-2

£1495

SEE PAGE 15 FOR PACKAGE DEALS

LEASE FROM £8.02 PER WEEK

• Motorised wheel balancer • Space-saving design • 2D Semi-auto data entry • Weight placement arm for accurate weight location • Behind spoke balancing program • Eco-drive technology

Megaspin 400

• Super-automatic motorised wheel balancer • Automatic, touch-free data entry • Incorporates ‘Weight Wizard’ intelligent software for reducing weight consumption saving ££££’s • Behind spoke balancing program • Space saver wheel guard

Megaspin 100

Part No: SPIN200-2

Part No: SPIN400-2

Part No: SPIN100

SPECIAL OFFER

£1995

LEASE FROM £10.70 PER WEEK

SEE PAGE 15 FOR PACKAGE DEALS

£3195

LEASE FROM £16.96 PER WEEK

SPECIAL OFFER

SPECIAL OFFERS

PAGE 15

£1695

LEASE FROM £9.00 PER WEEK

SEE PAGE 15 FOR PACKAGE DEALS

Semi Automatic Wheel Balancer

• Automatic measurement of wheel data • 7 Balancing programmes • Pax wheel programmes • Split (hidden) weight programmes • Optimisation programme • Large double digital display

• Double LED • Space saving wheel cover • 5 Alloy programmes • PAX programmes • Suitable for steel & alloy wheels

Part No: SBM 150

Part No: SBM 55

SPECIAL OFFER LEASE FROM £10.86 PER WEEK

• Manual Data input • 5 Alu modes • PAX program included • LED Display • 1.5 - 20" Rim width • 10 - 26" Rim diameter • 12 or 230 Volt operation

SPECIAL OFFER

Automatic Wheel Balancer

£2045

Ba lan ce rR oo m

SPECIAL OFFER

SEE PAGE 15 FOR PACKAGE DEALS

£1595

LEASE FROM £8.56 PER WEEK

SPECIAL OFFERS

PAGE 15

Pg.

) 0845 602 3436 8 www.ap-tech.co.uk

* aptech@andrewpage.com

9


m oo Optical R t 2 Wheel en nm Alignment System g i Al • Steel and cast

Laser 2 Wheel Alignment System

Laser 2 Wheel Alignment System

aluminium construction • Measures toe-in and toe-out by contact with wheel rims and optical sight alignment markers • Works on practically all cars & light commercial vehicles with rim diameters between 200 & 600mm • Some assembly required prior to use

• Steel construction gauge measures toe-in and toe-out by contact with wheel rims and laser beam alignment • Works on practically all cars and light commercial vehicles with rim diameters between 200 & 600mm • Operating instructions included • Powered by two AA batteries(supplied) • Some assembly required prior to use

• Updated version of optical system uses low radiation laser beam to indicate toe-in or toe-out • Single leg configuration and reversible contact probes allow on-ramp use • Works on practically all cars and light commercials with rim diameters from 200 to 600mm • Powered by 2 x AA cells and includes operating instructions

Part No: GA40

Part No: GA48

Part No: GA50

SPECIAL OFFER

SPECIAL OFFER

SPECIAL OFFER

£549.95

£369.95

Heavy Duty 4 Wheel Laser Alignment Suitable For LGV

£399.95

Camber Caster Gauge For TR400 Digital Camber Caster and KPI Gauge

• Heavy duty 4 wheel laser alignment • Comes with on-site training • Suitable for LGV’s • Allows measurement of the thrust line of vehicles with offset rear wheels

Part No: GTR400CTD

Part No: GTR400HD SPECIAL OFFER

£2595

SPECIAL OFFER

£385

LEASE FROM £13.77 PER WEEK

Wheel Aligner

• 4 Wheel laser alignment • Low ground clearance avoids front spoilers • Includes onsite training • Wheels from 12-23” • Rapid operation with ‘hang on’ heads • 1 Year warranty

Part No: GTR400W SPECIAL OFFER

Megalign System 4

• Laser 4 wheel alignment system • Available in portable trolley or wall mounted versions • Cable free • Includes comprehensive training • Handles rims up to 23” diameter • Supplied with all necessary adaptors for lowered vehicles, 4x4’s etc. • 2 Year warranty

£1895

SPECIAL OFFER

LEASE FROM £10.17 PER WEEK

Part No: GTR400T SPECIAL OFFER

£2195

Trolley mounted version available

Pg.

10

LEASE FROM £11.65 PER WEEK

4 Wheel Laser Alignment Trolley Mounted

) 0845 602 3436 8 www.ap-tech.co.uk

Part No: ALIGN4TM TROLLEY MOUNTED

£2295

LEASE FROM £12.31 PER WEEK

Part No: ALIGN4WM

SPECIAL OFFER

£1995

LEASE FROM £10.70 PER WEEK

SPECIAL OFFER

* aptech@andrewpage.com


Lubricated Direct Drive Portable Air Compressor Montecarlo D4

• Powerful 3hp lubricated pump unit • Cast iron cylinder • 5 Mtr hose included • Stable feet • Large wheels • Ergonomic extended handle with rubber grip • Proven high quality design • Suitable for a wide variety of uses • Tough, reliable and safe • Completely portable for ease of use • A wide selection of tools available (See compressor choice) • Comprehensive specification • Economical and efficient • Manufactured in compliance with CE directive 10.6cfm (300 l/min) 2850rpm 10 Bar (145psi) 37kg 2.2kw (3hp) W 820mm 230v, 50Hz D 355mm 50 ltr Receiver H 685mm

Part No: A-4116017305 SPECIAL OFFER

£225

B3914/150S

• Workshop compressor Ro • Ideal for most applications • High output om • Superior valve & cylinder head design • Precision engineered for efficiency and reliability • High quality electric motor • Stationary, robust design • Easy to use • Quiet, reliable and durable • Low speed pump • Comprehensive specification • Economical and efficient • Cast iron cylinder providing long life and efficient operation • Fitted with genuine high quality ABAC compressor pump unit • Manufactured in compliance with CE directive 15cfm (430 l/min) 1420rpm CAP/FAD 10.1cfm (280 l/min) 105kg 10 Bar (145psi) W 1260mm 2.2kw (3hp) D 400mm 230v, 50Hz H 940mm 150 ltr Receiver Also available as three phase: 400V, 50Hz B3914/150T Part No: A-4116018797 SPECIAL OFFER

£475

Belt Drive Air Compressors 230V Single Phase B312/60/P

• Ideal for use on site • Highly portable and robust unit • Easy to use • Quiet, reliable and durable • Low speed pump • Filter / regulator with two outlet ports • Large wheels and full handle for stability and convenience • Comprehensive specification • Economical and efficient • Fitted with genuine high quality ABAC compressor pump unit • Manufactured in compliance with CE directive 12cfm (330 l/min) 1420rpm CAP/FAD 7.9cfm (230 l/min) 64kg 10 Bar (145psi) W 960mm 2.2kw (3hp) D 390mm 230v, 50Hz H 770mm 60 ltr Receiver

Part No: A-4116017907 SPECIAL OFFER

£375

Co mp re ss or

Belt Drive Air Compressors PUMP warranty 400V Three Phase *On belt dr * ive model s B5924/200 providing you have a service at 12 months & B630/270

2 year

• High output • Ideal for most applications • High quality electric motor SPECIAL • Workshop compressor OFFER • Superior valve and cylinder head design • Precision engineered for efficiency and reliability • Cast iron cylinder providing long life and efficient operation • Pre-wired direct online starter/pressure switch with overload protection • Robust design • Low speed pump • Reliable and durable • Comprehensive specification • Economical and efficient • Fitted with genuine high quality ABAC compressor pump unit • Manufactured in compliance with CE directive B5924/200 24cfm (690 l/min) 1420rpm CAP/FAD 17.7cfm (500 l/min) 133kg 10 Bar (145psi) W 1400mm 4kw (5.5hp) D 495mm 400v, 50Hz H 1010mm 200 ltr Receiver B630/270 30cfm (840 l/min) 270 ltr Receiver CAP/FAD 23cfm (650 l/min) 1400rpm 11 Bar (160psi) 190kg 5.5 kw (7.5hp) W 1500mm 400v, 50Hz D 520mm H 1060mm

Part No: A-4116019759

SPECIAL OFFER

£695 SPECIAL OFFER

Part No: A-4116020193 SPECIAL OFFER

£925

Pg.

) 0845 602 3436 8 www.ap-tech.co.uk

* aptech@andrewpage.com

11


ir A

m oo 1/2” Impact Wrench R s l o • Fully insulated handle/housing To • Non slip, warm comfortable grip • Progressive throttle

• Maximum torque 313Nm • Pin clutch hammer mechanism • Forward and reverse mode • Rear exhaust through handle Specifications: Material: Die cast alloy, Size: 1/2”, Max Torque: 313Nm, Mechanism: Pin clutch hammer,  Free Speed: 7,000RPM, Weight: 2.3kgs, Min Hose Size: 3/8” / 10mm, Ave Air Consumption: 4.2cfm Part No: APL001

1/2”

Prestige Impact Wrench (Composite)

• Ergonomic design for comfort • Lightweight • Reduced vibration • Twin hammer impact mechanism • Mega Power Torque of 928Nm Specifications: Material: Composite, Size: 1/2”, Max Torque: 682ft-lb / 928Nm, Vibration: 4.5m/s², Sound: 100dBA, Mechanism: Twin hammer, Free Speed: 8,500RPM, Std. Bolt Size: 5/8” / 16mm, Length: 7.5” / 191mm, Weight: 4.27lbs / 1.94kgs, Min Hose Size: 3/8” / 10mm, Ave Air Consumption: 4.7cfm / 133 l/min Part No: APP203

SPECIAL OFFER

SPECIAL OFFER SPECIAL OFFER

£29.95

£99.95 SPECIAL OFFER

Professional 3/8” Workshop Air Hose • Abrasion, oil, fuel and kink resistant • Very hard wearing but still flexible • 310psi working pressure • Nitrile rubber/ PVC construction • 1/4” BSP brass male end fittings • High visibility yellow Length: 10m Part No: 07881

Length: 15m Part No: 07882

SPECIAL OFFER

SPECIAL OFFER

£12.75 Forecourt Airline Gauge

• 21" General Model 0.53m (21") Twin clip-on 0-138lbf/in² & 0-9.6bar • New valve design increasing inflation and deflation rates • Individual testing and certification • Bar, psi and kPa versions and large range of options and accessories • Proven linear spring gauge • Cast aluminium body • Proven linear gauge display Part No: ALG3H03 SPECIAL

OFFER

SPECIAL OFFER

£44.95

£18.45

Tyre Shop Model with 1.8m (6ft) Hose with Euro Style Connector

Robust but lightweight, the EC-approved AirForce has been developed with ruggedised engineering plastics to withstand high volume, intensive applications, thereby lengthening its operating life. Its excellent performance means extended tyre life, increased fuel economy and improved safety for tyre users. Part No: AFG1H08 SPECIAL OFFER

£29.95

10mm Reversible Air Drill

Die Grinder

Part No: APT401R

Part No: APT702

• Rear exhaust through handle • 3/8” / 10mm chuck • Side mounted forward/reverse shift • Triple planetary gear system • Jacobs keyless chuck • Powerful air motor • Positive trigger action • Ideal for drilling, reaming and honing

SPECIAL OFFER

£34.95

• Medium motor size • 6mm collet (3 piece design) • Rear exhaust through handle • Excellent for tyre buffing, polishing and grinding • Very versatile, excellent in confined workspace • 22,000RPM for maximum performance • High velocity, low vibration • Positive throttle action • Safety throttle lever

SPECIAL OFFER

£19.95

SPECIAL OFFER

Nitrogen Inflator

PCL’s N2 Inflator - combining the latest in high performance nitrogen generation with leading inflation technology. PCL Introduces a range of products designed for the inflation of tyres with nitrogen. This makes available for the first time, cost effective N2 delivery with market leading tyre inflation technology. To the tyre service company, the biggest benefit is that the PCL unit provides an excellent revenue opportunity while removing the need to buy, store and handle bottles. The chief benefits for the tyre customer are that, due to nitrogen’s properties compared to air, it can offer enhanced handling, improved fuel efficiency, extended tyre life and most importantly, increased safety, which is why it is used in Formula One. The PCL N2 Inflator incorporates the ability to preset the tyre pressure allowing the operator to automatically inflate a car tyre to the level required. It is so reliable and accurate that it enables the operator to securely continue with alternative work whilst the unit is inflating up to 4 tyres with N2, saving time and money. Using proprietary software with bespoke purging and flat tyre detection, the inflator can also cost effectively convert a car from air to nitrogen to give consistent provision of the 95% plus purity in the tyre. Key Product Benefits: • Revenue generation for tyre service providers • Both N2 fill and air to N2 conversion service for up to 4 tyres • Cost effective to use • Low life time costs with high grade filtration and high performance components • Guaranteed accuracy and robustness with ceramic pressure sensor • Simple to set up

Pg.

12

) 0845 602 3436 8 www.ap-tech.co.uk

SPECIAL OFFER

Nitrogen generator Part No: N2902 SPECIAL OFFER

£995

LEASE FROM £5.28 PER WEEK

SPECIAL OFFER

Nitrogen generator with multi tyre inflation Part No: N2102/2 SPECIAL OFFER

£1295

LEASE FROM £6.87 PER WEEK

* aptech@andrewpage.com


Sentinel 3.2T Two Post Lift with Baseframe

• Low lifting pad height 100mm • Rapid lifting time 60secs • Asymmetric lifting arms for longer wheelbase vehicles • Electrically operated mechanical latching system • 1Ph option available

Part No: TWINTEC/1232/1

SINGLE PHASE

SPECIAL OFFER

£2445

LEASE FROM £13.12 PER WEEK

Part No: TWINTEC/1232 SPECIAL OFFER

SPECIAL OFFER

£2295

LEASE FROM £12.31 PER WEEK

SPECIAL OFFER

Two Post Hydraulic Lift

With Baseplate Electro Mechanical • Budget cost 3.2 tonne • Minimum column height • Hydraulic lift • Complete with pad height adaptors • Available in single or three phase • CE approved

Part No: CL3200

3 Tonne Two Post Mechanical Lift

• Low profile arms • Foot protection device fitted to lifting arms • Automatic arm locking • Easy vehicle access • Diagnostic control panel • Suitable for most passenger cars and car derived vans • Heavy duty columns for maximum rigidity • Integral automatic lubrication system • Lift can be mechanically wound down in the event of disruption to power supply Part No: SF9010 SPECIAL OFFER

£2495

LEASE FROM £13.39 PER WEEK

Sprinter Mid Rise Scissor

Technical data Sprinter Express Mobil II • 2500kg lifting capacity • 982mm lifting height • Lifting time - approx. 11 seconds • Lowering time - approx. 12 seconds • 102mm drive-on height • 450mm Platform width • 1400-1932mm Platform length • 1,5kw Motor • 240V/Hz Power supply Part No: SPRINTER

SPECIAL OFFER

SPECIAL OFFER

LEASE FROM £9.63 PER WEEK

LEASE FROM £13.00 PER WEEK

£1795

Li ft Ro om

£2450

Four Post Wheel Alignment Lift with Rear Slip Plates • Lifting time 45 seconds • 12 safety locking positions • 4000kg lifting capacity • 4166mm platform length • Fitted with rear slip plates • 3 phase

Part No: HD-9A SPECIAL OFFER

£4095

LEASE FROM £21.97 PER WEEK

Pg.

) 0845 602 3436 8 www.ap-tech.co.uk

* aptech@andrewpage.com

13


d an H

om o R ls o To

Digital Tyre Pressure & Tread Depth Gauge Product Options

Tyre Tread Depth Gauge

PCL's "Made in Sheffield" Tyre Tread Depth Gauge is manufactured to stringent quality standards and is VOSA approved for MOT testing. Easy to read, it provides accurate measurement of tread 1-26mm and has a handy pocket clip. Features a 1.6mm illegal tyre tread depth mark.

This 3-in-1 Digital Tyre Pressure and Tread Depth Gauge with light is self-calibrating and features a 90 second auto power off. Easy to use, it displays an illegal tyre tread depth warning. The stylish blue light is ideal for working in the dark.

Part No: TDG16C01

Part No: DTPG7 SPECIAL OFFER

SPECIAL OFFER

£16.95

£2.75

Pocket Tyre Pressure Gauge

Tyre Pressure Gauge with in-line head

Part No: TPG1H01

Part No: TPG20H01

TPG20 Tyre Pressure Gauge with an in-line head, used for where direct access to the tyre valve is required. Both incorporate a self-adjusting friction device which enables the pressure to be read when the tyre pressure gauge is removed from the tyre valve, and a positive sealing washer to ensure reliability. Features integral pocket clip and removable protective cap.

The TPG1 is a pocket tyre pressure gauge with an angled head designed to fit onto the tyre valve at 90 degrees.

SPECIAL OFFER

SPECIAL OFFER

£3.95

£3.95

3 Piece Impact Socket Sets

With plastic sleeve for alloy rims. 3 x Impact sockets 1/2”: 17 - 19 - 21 mm

Wheel Hub Grinder Kit

Standard size for saloon / estate cars • Hub Grinder tool supplied with 1 x grinding disc • Inner diameter 58mm outer diameter 160mm • Max grinding speed 1500 rpm

Corrosion Removal Kit

Ideal for use on hubs / wheel studs brake drums / discs etc. Includes adapters for drills, impact wrenches and low speed buffing tools.

SPECIAL OFFER

Part No: 515.1005 SPECIAL OFFER

Part No: 66192000

SPECIAL OFFER

Part No: 3919

SPECIAL OFFER

£17.95

£39.95

SPECIAL OFFER

SPECIAL OFFER

SPECIAL OFFER

£29.95

Pg.

14

) 0845 602 3436 8 www.ap-tech.co.uk

* aptech@andrewpage.com


Tyre Changer/ Balancer Package

W he el

Tyre Changer/ Balancer Package

Part No: WC5201/ WC5521

Tyre Changer/ Balancer Package

Part No: WC5201AA/ WC5521

SAVE

Part No: WC5201RM/ WC5521

SAVE

SAVE

£621

£796

£731

SPECIAL OFFER

SPECIAL OFFER

SPECIAL OFFER

LEASE FROM £11.26 PER WEEK

LEASE FROM £13.68 PER WEEK

LEASE FROM £19.63 PER WEEK

£2099

£2549

SPECIAL OFFER

£3659

Tyre Changer/ Balancer Package

Part No: SBM150/AL518

De al Ro om

SPECIAL OFFER

Part No: SBM150/AL518/TH

Tyre Changer/ Balancer Package

Part No: SBM55/AL518

Part No: SBM55/AL518/TH

SPECIAL OFFER

SPECIAL OFFER

SPECIAL OFFER

SPECIAL OFFER

LEASE FROM £20.14 PER WEEK

LEASE FROM £27.33 PER WEEK

LEASE FROM £18.02 PER WEEK

LEASE FROM £24.92 PER WEEK

£3795

£3395

£5150

£4695

Package pricing available while stocks last.

TCE 4460 & TCE 320

TCE 4420 & TCE 300

TCE 4460: • Alloy rim protection for bead breaker • Automatic tilt back tyre changer with raising pole • Clamps up to 30” rims • For up to 15” width • Pneumatic locking TCE 320: • Pneumatic operated helper device • Enables changing of run flat and ultra high performance tyres

SPECIAL OFFER

SPECIAL OFFER

£4050

LEASE FROM £24.57 PER WEEK

WBE 4140

TCE 4420: • Automatic tilt back tyre changer • Clamps up to 23” rims • Pneumatic locking • Alloy rim protection for bead breaker and mounting jaws TCE 300: • Pneumatic operated helper device • Enables changing of run flat and ultra high performance tyres SPECIAL OFFER

£3095

• Wheel balancer • Weight sticking system with automatic measurement of rim diameter and distance** • Rim measurement of diameter and distance • Split weight and multi operator programmes • Large TFT monitor • Weight sticking system • 11 Balancing programmes Screen shot of balancing software

SPECIAL OFFER

SPECIAL OFFER

£2350

LEASE FROM £16.61 PER WEEK

TCE 4220

• Special mechanical lock for vertical adjustment • Horizontal distancing adjustment • Side swinging column • Self-centring device

SPECIAL OFFER

SPECIAL OFFER

£1395 LEASE FROM £7.48 PER WEEK

LEASE FROM £12.61 PER WEEK

TCE 4420

• Sliding arm with unique air blocking device • Two speed (only on three phase option) • Pneumatic tilt back column • Self-centring device • TCE 4425 comes with integrated tyre inflation system in the clamping jaws • Available with TCE 300 and additional helper arm, to change RFT (Run Flat Tyres) and UHP (Ultra High Performance tyres)

SPECIAL OFFER

SPECIAL OFFER

WBE 4100

• Wheel balancer for passenger cars, light commercial vehicles and motorcycle wheels* • Nine passenger car and two motorcycle programmes • Calibration and self diagnosis programmes • Separation of weights including matching and splitting • TFT monitor with WBE 4140 • Compact design

SPECIAL OFFER

SPECIAL OFFER

£1795

LEASE FROM £9.63 PER WEEK

*Optional Accessories. **Only WBE 4140.

) 0845 602 3436 8 www.ap-tech.co.uk

* aptech@andrewpage.com

SPECIAL OFFER

£1395 LEASE FROM £7.48 PER WEEK

Pg.

15


l

ll

lllllll lll

lllllllll ll

ll

l lll ll lllllll

ll

DEAL

ll

ll

ll

WHEEL

lll ll llllllll

l

ORDER ONLINE & RECEIVE FREE DELIVERY WHEN YOU SPEND £100 (exc. VAT) OR MORE!

BRANCH DIRECTORY Beverley

tel: 01482 887766 BIRMINGHAM

tel: 0121 328 7611 Blackburn

tel: 01254 278078 Bolton

tel: 01204 396105 Boston

tel: 01205 358 350 Bradford

tel: 01274 723156 Bramley

tel: 0113 2362122

Bury

tel: 0161 7631515 Cambridge

tel: 01223 425481 Castleford

tel: 01977 511000 COVENTRY

tel: 02476 637181 Darlington

tel: 01325 488777 Derby

tel: 01332 343999 Doncaster

tel: 01302 886611

Durham

tel: 0191 3757577 Grimsby

tel: 01472 346777 Halifax

tel: 01422 355366 Harrogate

tel: 01423 568181 Heeley

tel: 0114 2554405 HuddersFIeld

tel: 01484 420077 Hull

tel: 01482 586155

Keighley

MansFIeld

Oldham

tel: 01535 610999

tel: 01623 648555

tel: 0161 6336331

King’s lynn

Middlesbrough

Peterborough

tel: 01553 782 950 Leeds

tel: 0113 200 1000 Leicester

tel: 0116 285 4371 Lincoln

tel: 01522 539444 Malton

tel: 01653 690990 Manchester

tel: 0161 8487557

tel: 01642 243333 Morley

tel: 0113 2526600 Newburn

tel: 0191 2678999 Newcastle

tel: 0191 2242345 Nottingham

tel: 0115 9700444 OldBURY

tel: 0121 5527555

tel: 01733 340177 Preston

tel: 01772 258326 Rawdon

tel: 0113 2506644 Scarborough

tel: 01723 341122 Selby

tel: 01757 290290 ShefFIeld

tel: 0114 2446999

Stockport

tel: 0161 4806914 Sunderland

tel: 0191 5484484 Thirsk

tel: 01845 526688 WakeFIeld

tel: 01924 365727 Warrington

tel: 01925 632264 Wigan

tel: 01942 231231 York

tel: 01904 414466

To place an order for any of the items in this brochure you can visit www.ap-tech.co.uk and buy online. Or call 0845 602 3436 to speak to one of our experienced sales advisors. • A £5.92 (exc. VAT) delivery charge will be applied to all orders under £100 (exc. VAT) • Orders over £100 (exc. VAT) will receive free delivery • All offers subject to availability and applicable to UK mainland only • All prices exclude VAT • Offers available until 31st March 2011 unless otherwise stated • E & OE • Prices and specifications subject to change without notice.


The Wheel Deal small