All You Should Know About A Pipe Laser A pipe laser is used by construction workers to lay down pipes. You may want to consider utilizing one of these handy devices if you are in the construction business as they enable you to lay your piping straight and even with the ground. To enable you to align the pipes, the laser provides a solid, straight line along the ground. Shining it above or through the pipes is how this device is used. There are other uses for this laser on a construction site beyond its use for aligning pipes; it can also be used to measure other surfaces. Because of its versatility, this laser device is a musthave in the construction industry. One of the numerous benefits of the laser is that it is reasonably small in size. Fitting into places in which people couldn't fit into normally is made possible. If you are working in a sewer, you could use the laser by lowering it into the space and measuring the area that you need to lay pipelines. The laser will save you lots of time and money because you would not have to invest time digging up the area manually to measure by hand. Using a laser is also a more accurate way of laying pipe than the old way of using strings and batter boards. It uses an intense, concentrated beam of light which is ideal for both short and long distances. The laser is plainly visible so various elements such as rain or wind will not disrupt it. To use the pipe laser, you have to know how to set it up to be the most effective in your project. You can do this a couple of different ways. Placing it in the pipe and aligning it so that it's in a centered position is one of the ways to set up the laser. Or, in the manhole you are working in, you can set the laser on a tripod or trivet plate. Before you make use of the laser, you'll want to check and be sure the calibration is adjusted to the correct settings. If you would like, you can get a professional technician to do this. You are ready to calculate the grade once you have set up your laser and made certain it is calibrated correctly. First, figure out the difference in elevation between the two manholes you are working on and then find the distance between the two. Divide the first number you find by the distance. You may need to multiply the rise by one hundred to get a percentage for the slope if your laser reads the slope in percent. Then set your laser to the grade you need depending on your construction project once you've completed the instructions for calculating laser grades. When you are using a laser, it is crucial that you follow a few safety measures to prevent any harm to yourself or co-workers. It is critical that you do not stare into the laser beam. You should also never look at the beam directly with any kind of optical instrument. Both of these actions could damage your eyesight. Losing your sight, or even some of it, is the last thing you want to do and could possibly end your career. Use the latest technology, a laser pipe, for your construction projects. This device can help you align pipes as well as other things you may need even with the ground. This easy-to-use device is worth the investment. When you want the most effective precision, check out Tri County Transit to get an AGL pipe laser kit made from the most suitable components. For further info on Tri County Transit, visit them at their site, http://www.tricountytransit.com/.
Tri County Transit & Laser
All You Should Know About A Pipe Laser
Document Tags: agl pipe laser, pipe laser level, pipe laser http://www.tricountytransit.com/
Tri County Transit & Laser