Page 1


company statement Vision: Intelligent Irrigation Solutions

mission: DIG is defined by our commitment to our customers. We strive to exceed customer expectations by embracing continuous improvement throughout our organization.

Values: DIG is dedicated to the research and development of quality, environmentally conscious irrigation products that support our customers’ needs. We are committed to our customers’ success and to helping them achieve their goals. We will proactively develop products of the highest quality in an effort to satisfy global customer needs. We will constantly strive to develop products that use the earth’s resources wisely. We will continue to engage in educational opportunities for our customers and employees. We place a high value on integrity and will communicate openly and honestly with our customers and employees.

new products LEIT XRC-ETF Ambient Powered Irrigation Controller with Flow and ET Sensing Capability The LEIT XRC-ETF is a new generation of ambient light irrigation controller. The LEIT XRC-ETF uses a new technology (patent pending) to send and receive information via existing solenoid wires. The LEIT XRC-ETF’s new and advanced features allow independent flow sensing capability for each valve including master valve, and soil sensor connections on any valve. The new controller also has wireless ET capability and a USB port to upload new software. a. The controller is able to learn and store the flow rate information for each valve. The user can set a minimum and maximum flow deviation per valve as a percentage of nominal flow, which can be used for system override. b. Flow velocity is measured, and this information together with pipe size allows flow volume (GPM/m3/h) to be provided by the controller for each valve. c. Flow rate, velocity and volume information can be reviewed in the controller’s Status Report. The current day, month, previous months and the entire year’s information are available in the History Report. d. The LEIT XRC-ETF can read moisture sensors at any valve location which does not have a rain sensor (SKIT). The LEIT XRC-ETF can read Irrometer sensors without a special interface kit and Decagon sensors with a dedicated interface kit. These sensors are powered by the LEIT XRC-ETF and do not require a separate powered controller.

LEIT-ET-WWS Wireless Weather Station DIG LEIT-WWS wireless weather station is designed to be used with the LEIT-2ET and the LEIT XRC-ETF ambient powered controllers. DIG LEIT-WWS is a wireless weather station that uses ambient light and can operate in all weather conditions. The LEIT-ET wireless weather station can be mounted on a column and after installation the weather station starts sending information to any LEIT-2 or LEIT XRC-ETF within a distance of up to 300’ (100 m) line of sight. The LEIT-2ET and the LEIT XRC-ETF can receive information from up to 5 LEIT-ET wireless weather stations using the same radio frequency. • The LEIT-ET wireless weather station can gauge rainfall amount, humidity level, temperature, wind speed and solar radiation. • History Report can provide a monthly and daily average of rainfall, temperature and humidity.

LEIT-2ET, ET Ambient Powered Controller The LEIT–2-ET can receive information from the wireless weather station. Utilizing the information received along with the user information inputted, the controller can adjust the irrigation program schedule for each valve to provide more precise amounts of irrigation based on current microclimate.

FSKIT 8800 Flow Sensor DIG’s FSKIT 8800 flow sensors can be used with the LEIT XRC-ETF system and are capable of measuring water flow rates without using external power. A simple connection to the existing solenoid wires is all that is required. The low power, paddle wheel sensors are available in ¾”, 1”, 11/2” and 2” with 1-120 GPM and calibrated to 5% FSD.

1

1.800.322.9146


taBle oF contents multiple outlet emitters

accessories cont.

12-outlet emitters and accessories ……………………… 4

Threaded fittings ………………………………………… 24

6-outlet emitters …………………………………………… 5

Stakes, semi rigid risers and stake assembly ……………… 25

4-outlet emitters …………………………………………… 6

Pop-up riser assembly …………………………………… 25

sinGle outlet drip emitters

Single outlet pressure compensating emitters …………… 6 Button, adjustable and flag emitters ……………………… 7 dripline

swiVel FittinGs

3/4-2” swivel fittings for manifold assembly ……………… 26 ac controllers and ValVes

Four and six station irrigation

Micro-line™ 1/4” non-PC dripline ………………………… 8

and propagation controllers …………………………… 27

Excel™ pressure compensating dripline…………………… 9

Valve assembly with swivel fittings ……………………… 27

Excel™ pressure compensating dripline with check valve ……………………………………… 10 micro sprinklers, FoGGers and spray Jets

Jet sprayers ……………………………………………… 11 A-Jet sprinklers …………………………………………… 11 Adjustable spray jet ……………………………………… 11 EXL series fogger ………………………………………… 12 Mist sprayers ……………………………………………… 12 8” and 12” pop-up micro sprayers ………………………… 13 Fan spray jet ……………………………………………… 13 drip system components

3/4-2” plastic in-line valves ………………………………… 28 Battery operated controllers & ValVes

Model 9001 hose end irrigation timer ……………………… 29 Two-wire single and four station battery operated controller …………………………… 30 Two-wire single station battery operated controller with in-line valve and actuator ………………………… 31 Single station with 3/4-2” in-line valve …………………… 34 Single station with actuator for 3/4” and 1” anti-siphon valve ………………………… 34 Single station propagation and irrigation controller with solenoid or in-line valve …………………………… 35

Air relief, flush and shut off valves ………………………… 14

Conversion adapters ……………………………………… 35

Drip zone assembly ……………………………………… 15

Four and six station battery

Adjustable pressure regulators …………………………… 16

operated controllers …………………………………… 36

Preset pressure regulators ………………………………… 16

DC solenoid with in-line valve ……………………………… 36

Filters

uniVersal dc solenoid and ValVes

3/4” and 1” plastic screen filters…………………………… 17

Two-wire universal DC valve and actuator ………………… 32

3/4” and 1” plastic disc filters ……………………………… 18

Two-wire S-305DC solenoid ……………………………… 33

1 1/2” and 2” plastic screen filters ………………………… 19 1 1/2” and 2” plastic disc filters …………………………… 20 poly and distriBution tuBinG

1/8”, 1/4”, 1/2”, 3/4” and 1” tubing ………………………… 21 FittinGs

Compression fittings ……………………………………… 22 Universal 1/2” nut lock fittings …………………………… 22 1/2” and 1/4” barb fittings ………………………………… 23 accessories

1/4” in-line shut off valve ………………………………… 24 Shrub adapter……………………………………………… 24 Punches …………………………………………………… 24 Hose end and goof plugs ………………………………… 24 PVC inserts ………………………………………………… 24

www.digcorp.com

leit controllers and accessories

LEIT-2 system ……………………………………………… 37 LEIT RC2 remote control handset ………………………… 38 LEIT 4000 four, six, and eight station standard series ………………………………………… 39 LEIT X 10-28 stations ……………………………………… 40 LEIT XRC controller ………………………………………… 41 LEIT Link two-way remote control handset ………………… 42 LEMA 160HE valves ……………………………………… 43 LEMA 1600HE solenoid …………………………………… 44 LEIT accessories ……………………………………… 45-46 charts and warranty

Headloss charts …………………………………………… 47 Charts and formulas ……………………………………… 48 DIG warranty ……………………………………………… 49

2


diG Family oF products leit controllers • • • • •

Ambient light powered irrigation controllers Operate day and night in all weather conditions Dependable, reliable, rugged Provide irrigation control solutions others can’t offer No power supply needed – Control up to 28 stations – Bilingual programming

drip irriGation • • • • • •

A wide range of drip and micro sprinkler products From single to multi-outlet pressure compensating drippers and drip heads High quality, high impact compression and barb fittings Adjustable, take-apart and button drippers in a variety of flow rates Wide range of micro sprayers, foggers, and micro sprinklers From low flow foggers to large diameter micro sprayers

Battery operated controllers & ValVes • • • • •

Affordable, easy to install and use Can be used with most brand name valves Available with 3/4 to 2” in-line globe valve Waterproof construction; can be used above or below grade Digital display with simple four button for easy programming

Filters • Complete line of quality screens and disc filters for most irrigation and industrial applications • Available from 3/4” to 2” • Interchangeable screen-disc feature for all your irrigation needs

tuBinG • • • • • • •

All sizes are available in a wide range of coil configurations 1/8” to 1/4” vinyl and polyethylene distribution tubing 1/2” to 1” polyethylene tubing Made of low-density polyethylene using Union Carbide / Dow 7510 Fingerprint™ Extruded in our facility to the highest manufacturing standards for quality you can count on Pressure compensating dripline in 16 and 17 mm with or without check valve 1/4” micro dripline in a variety of spacings and coil sizes

swiVel maniFold FittinGs • • • •

3

Quick and easy assembly and disassembly No tools required – easily tightened by hand O-ring to prevent leaks No cutting, measuring or gluing

1.800.322.9146


multiple outlet emitters The TOP concept is designed for first time installations or retrofitting an existing sprinkler riser into an efficient 12-outlet drip irrigation system. The TOP concept utilizes unique self-cleaning, pressure compensating emitters enabling long runs with even water distribution from all outlets. Features: • 12 individually pressure compensating, self flushing emitters allow easy passage of water and minimize clogging • Flow rates: .6, 1, 2.2 and 3.3 GPH (2.2, 4, 8.3 and 12.5 l/h) • Pressure compensating range: 8-80 PSI (.5-5.6 BAR) • Interchangeable emitters for variable flow rates in a single head • Color-coded emitters and barbs easily identify flow rate at each zone

speciFications:

• Flow Rates: .6-33 GPH (2.2-12.5 l/h) • Operating Pressure: 15-50 PSI (1-3 BAR) • Inlet Size: 1/2” FNPT • Use with 1/8” (.187 OD) or 1/4” (.150-.160 ID) Distribution Tubing • TOP Kits Contain 100’ of 1/8” Distribution Tubing, Accessories and Stakes ° 1/4” Converter Elbow and Barb Allow The Use of 1/4” Distribution Tubing • Filter Requirement: 120 Mesh PERFORMANcE TOTAl FlOw RATE PER DRIP hEAD Number of drip heads 1 5 10 15 20 25 30 35 40 45 50

FlOw RATE IN GPM 0.6 BLACK 1 RED 2.2 GREEn 3.3 PuRPLE 0.12 0.2 0.44 0.66 0.6 1 2.2 3.3 1.2 2 4.4 6.6 1.8 3 6.6 9.9 2.4 4 8.8 13.2 3 5 11 16.5 3.6 6 13.2 4.2 7 15.4 4.8 8 5.4 9 6 10

3 2.5 2 1.5

1 0.5 0 0

5

10

15

20

25

30

35

40

45

50

55

PRESSURE (PSI)

60

65

70

75

Materials: • Body and Cover: High Impact Plastic • Diaphragm: Silicon

• Backup mini-disk filter

• Install above grade or place below grade in a 6” emitter box

3.5

• Filter: Nylon

• Each emitter individually filtered (approximately 80 Mesh) • Rugged materials to withstand the most adverse conditions

Flow rate Vs. pressure 4

FLOW RATE (GPH)

top 12-outlet drip emitter

Dimensions:

Emitter Conditions During Self Flushing Mode

• Dimensions: 3” W x 2” H (7.6 cm W x 5 cm H)

• Inlet plugs provide closure options for up to eight emitters

0-3 PSI

3-8 PSI

8-80 PSI

The TOP concept consists of self-cleaning pressure compensating emitters. Their ability to compensate for pressure fluctuations between 8-80 PSI is achieved through the utilization of a silicone diaphragm and the water passage design. The self flushing function works between 0-8 PSI, and is achieved as follows: At 0-3 PSI the flow is relatively high and the emitter is in flushing mode while the diaphragm is completely open. As the pressure increases between 3-8 PSI, the diaphragm slowly begins to close. Flow is still high, but steadily decreasing. The diaphragm is closed between 8-80 PSI, and the flow is constant. Opening and closing the system will bring the TOP to a flushing mode.

www.digcorp.com

ORDERING INFORMATION Model TOP-000 TOP-005 TOP-010 TOP-020 TOP-030 TOP-100 TOP-300

Description Manifold only .6 GPH per zone 1 GPH per zone 2.2 GPH per zone 3.3 GPH per zone KIT with 1 GPH per zone KIT with 3.3 GPH per zone

Color

black red green purple red purple

4

80


multiple outlet emitters 6-outlet pc drip emitter/BuBBler

speciFications:

DIG’s 6-outlet high flow drip bubblers have individual flow-regulating emission devices, enabling long runs with even water flow throughout all the outlets at a wide range of water pressures. Available in two configurations and four flow rates.

• Flow Rates: 4.5, 5.5, 8.2, and 9.7 GPH (17, 20.8, 31 and 36.8 l/h) • Operating Pressure: 15-50 PSI (1-3.5 BAR) • Inlet Size: 1/2” FNPT • Outlet Size: 1/4” Barb and Barbed Elbow • Use with 1/4” (.150-.160” ID) Distribution Tubing • Filter Requirement: 120 Mesh PERFORMANcE TOTAl FlOw RATE PER DRIP hEAD

Features: • Pressure compensating range: 15-60 PSI (1.2-4.6 BAR) • Large water passages with rolling diaphragms allow for debris to pass through without clogging • Individual flow-regulated devices for each outlet • Rugged materials to withstand adverse conditions • Install above grade or place below grade in a 6” emitter box • Available with bottom mounted side outlets or barb outlets to hold 1/4” distribution tubing • Color coded body for easy identification

Number of Flow per outlet drip heads 4.5 GPH 0.7 GPM 1 27 0.45 5 135 2.25 10 270 4.50 15 405 6.75 20 540 9.00

Flow per outlet 5.5 GPH 0.9 GPM 33 0.55 165 2.75 330 5.50 495 8.25 660 11.0

Number of Flow per outlet drip heads 8.2 GPH 0.13 GPM 1 49.2 0.82 5 246 4.93 10 492 8.20 15 738 12.3 20 984 16.4

Flow per outlet 9.7 GPH 0.16 GPM 58.2 0.97 291 4.85 582 9.7 873 14.5 1164 19.4

Materials: • Body and Covers: High Impact Plastic

Flow rate Vs. pressure

• Flow Regulating Device: PBT

9

• Diaphragms: Silicon

8

• Barb Outlets: Acetal

FLOW RATE (GPH)

10

7

6-outlet adJustaBle drip emitter/BuBBler The 6-outlet adjustable drip emitter is a high flow emission device with 6 outlets that have adjustable flow between 0-20 GPH (0-75 l/h). It is available with barbed outlets that swivel so the flow dial tucks under the head after installation. This system is designed for retrofit installations above or below grade. Features: • Swivel barb outlets allow installation flexibility and protection of the flow control • Made of rugged materials to withstand adverse conditions • Can be installed above or below grade in a 6” (15 cm) emitter box

speciFications:

• Flow Rate is Adjustable Between 0-20 GPH (0-75 l/h) Per Each Outlet • Operating Pressure: Up to 50 PSI (3.5 BAR) • Used with 4 mm (.150 -.160 ID) Distribution Tubing • Inlet Side: 1/2” Female Thread • Filter Requirement: 80 Mesh

6

Dimensions:

5 4

• 2.25” W x 1.5” H (57 mm W x 38 mm H)

3 2 1 0 0

5

10

15

20

25

30

35

40

45

50

55

60

65

PRESSURE (PSI)

ORDERING INFORMATION Model 06-504 06-506 06-508 06-510

5

Description 4.5 GPH with side outlet 5.5 GPH with side outlet 8.2 GPH with side outlet 9.7 GPH with side outlet

ORDERING INFORMATION Color green black blue brown

Model 06-604 06-606 06-608 06-610

Description 4.5 GPH with barb outlet 5.5 GPH with barb outlet 8.2 GPH with barb outlet 9.7 GPH with barb outlet

Color green black blue brown

ORDERING INFORMATION Model 06-620

Description Adjustable flow with barb outlet and 0-20 GPH per outlet

1.800.322.9146


multiple and sinGle outlet drip emitters 4-outlet drip/ BuBBlers Convert a 1/2” sprinkler riser into an efficient 4-outlet bubbler system. Features • Pressure compensating range: 10-60 PSI (.7-4.2 BAR) • Color coded outlet barb may be removed and replaced to change flow rates • Used with 1/4” (.150-.160 ID) distribution tubing

pressure compensatinG emitters

speciFications

DIG drip emitters come in a wide variety, including single outlet pressure compensating emitters, flag and adjustable emitters. The 4-outlet pressure compensating emitter is available in 2, 6, 12 and 20 GPH. DIG drip emitters are available on barbs, stakes or 1/2” threaded bases.

• Flow Rates and Color Codes: ° 1 GPH (4 l/h) Color Code – Black ° 2 GPH (8 l/h) Color Code – Green ° 4 GPH (16 l/h) Color Code – Red • Operating Pressure: 10-45 PSI (.7-3.1 BAR) • Available with Barb or 1/2” FNPT • Filter Requirement: 155 Mesh

Materials • Body & Cover: Polypropylene • Diaphragm: Silicone

• Built in screen filter and large water passage to prevent clogging

Flow rate Vs. pressure FLOW RATE (GPH)

5 4 3 2 1 10

15

20

30

40

50

60

PRESSURE (PSI)

speciFications:

• Flow Rates: 2-20 GPH (7.6-76 l/h) • Operating Pressure: 10-50 PSI (.7-3.5 BAR) • 1/2” FNPT • Filter Requirement: 120 Mesh

Features • Pressure compensating range: 10-50 PSI (.7-3.5 BAR) • Uniform flow rate

Materials

• Color coded flow rates

• Body: ABS

• Large water passage to reduce clogging

• Diaphragm: EPDM

• Constructed of UV-resistant plastic material • Pressure compensation enables the use of longer laterals with smaller diameter distribution tubing

ORDERING INFORMATION Model 06-042 06-043 06-044 06-045

Description 2 GPH 1/2” FNPT emitter bubbler 6 GPH 1/2” FNPT emitter bubbler 12 GPH 1/2” FNPT emitter bubbler 20 GPH 1/2” FNPT emitter bubbler

www.digcorp.com

Color blue black red green

ORDERING INFORMATION Model 06-014 06-015 06-016

Description 1 GPH button dripper 2 GPH button dripper 4 GPH button dripper

Color black green red

6


sinGle outlet drip emitters Button drip emitters

adJustaBle drip emitters

FlaG drip emitters

Features

Features

Features

• Unique design with a minimum width passage of 0.043” provides a turbulent flow

• Can be taken apart for easy cleaning

• Self tapping barb inlet for easy installation

• Uniform flow rate • Constructed of high-quality material to ensure stability and long life

speciFications:

• Click adjustment from flow off to full flow – perfect as the plant grows and its need for water changes

• Twist open top with lock for secure operation under pressure, easy cleaning (with locking feature)

• UV stabilized material for long life

speciFications

• Durable high impact plastic

• Flow Rates and Color Codes: Adjustable from 0-10 GPH (0-38 l/h) Color Code – Black • Operating Pressure: 10-30 PSI (.7-2 BAR) • Available on 1/4” Barb or 5” (12.7 cm) Stake with Barb • Eight Streams for a 360° Coverage • Filter Requirement: 155 Mesh

• Flow Rates and Color Codes: ° .5 GPH (2 l/h) Color Code – Brown ° 1 GPH (4 l/h) Color Code – Black ° 2 GPH (8 l/h) Color Code – Green • Operating Pressure: 10-20 PSI (.7-1.4 BAR) • Available on 1/4” Barb • Filter Requirement: 155 Mesh

Materials

speciFications:

• Flow Rates and Color Codes: ° 1 GPH (4 l/h) Color Code – Black ° 2 GPH (8 l/h) Color Code – Green ° 4 GPH (12 l/h) Color Code – Red • Operating Pressure: 10-20 PSI (.7-1.4 BAR) • Filter Requirement: 155 Mesh

Flow rate Vs. pressure FLOW RATE (GPH)

• Body: Polypropylene

• Outlet barb for use with 1/4” (.150-.160 ID) distribution tubing

30

12 10

Flow rate Vs. pressure

20 15

8

4.5

6 4

4.0

2 2

4

6

8

10

12

14

16

3.5

PERFORMANcE Pressure Flow (PSI) (GPH) MAxIMuM REcOMMENDED 1/2” POlyEThylENE TubING lENGTh (FT) Emitter .5 GPH brown 1 GPH black 2 GPH green Spacing Pipe ID .600 Pipe ID .600 Pipe ID .600 12” 24” 36” 48”

197’ 329’ 439’ 525’

140’ 236’ 314’ 350’

Fully open (approx. 22 clicks)

15 20 30

8.7 10.3 13.0

Throw Dia. (ft) 1.2 1.9 3.0

FLOW RATE (GPH)

NUMBER OF CLICKS

7

Description .5 GPH 1 GPH 2 GPH

2.5 2.0 1.5 1.0 0.5

80’ 140’ 180’ 236’

15

20

PRESSURE (PSI)

ORDERING INFORMATION Model 06-019 06-020 06-021

3.0

25

ORDERING INFORMATION Color brown black green

ORDERING INFORMATION Model 06-011 06-012

Description 0-10 GPH on barb 0-10 GPH on stake

Color black black

Model 06-009 06-010 06-007

Description 1 GPH with 1/4” barb 2 GPH with 1/4” barb 4 GPH with 1/4” barb

Color black green red

1.800.322.9146


micro-line ™ micro-linetm 1/4” non-pc dripline The micro line dripline is extruded micro tubing with flow labyrinth in-line emitters molded into the inside wall of the micro tubing. The in-line dripper is built with a large filter along the cross section of the dripper to ensure that particles on the bottom of the micro tubing do not enter the labyrinth, ensuring troublefree operation and a long life.

speciFications:

• Large inlet filter along the length of the dripper prevents particles from entering the line • Two outlets per dripper ensure less chance of clogging • Resistant to chemicals and fertilizers commonly used in landscape applications

34’

PREssuRE vs. FlOw Pressure in PSI 12 13 14 15 16 17 18 19 20

Flow rate Vs. pressure

Flow in GPH 0.513 0.531 0.553 0.569 0.599 0.601 0.625 0.636 0.654

1.0

FLOW RATE (GPH)

• Small dripper size with large water passage labyrinth and turbulent flow helps reduce clogging

18’

1.2

Features: • Small diameter dripline can be used above or below grade or under mulch for a variety of applications such as containers and narrow plantings

MIcRO lINE 1/4” NON Pc DRIPlINE MAxIMuM lATERAl lENGTh ON FlAT TERRAIN (FEET) Dripper spacing 6” 12”

• Flow Rates and Dripper Color Code: ° .57 GPH (2.1 l/h) Color Code – Blue • Operating Pressure: 7-20 PSI (.5-1.4 BAR) • Dripline Color Code: Black or Brown • Dripline Spacing: 6” or 12” (15-30 cm) • Drip Tubing Size: 1/4” with .170 ID x .250 OD (4 mm) • Minimum Bending Radius: 2’ (60 cm) • Available in 100’, 1000’ and 3000’ Coils • Filter Requirement: 155 Mesh

0.8

Materials:

0.6

• Liner Low-Density Polyethylene

0.4 0.2 0

10

20

30

40

50

PRESSURE (PSI)

• Can be used with any 1/4” barb fittings • Flexible tubing for easy installation • Made of low-density, UV-resistant, 7510 polyethylene resins with Fingerprint® ORDERING INFORMATION

ORDERING INFORMATION Model Description ML-1006 1000’ (300 m), 6” (15 cm) spacing, .58 GPH (2 l/h), .170 ID x .250 OD ML-1009 1000’ (300 m), 9” (22.8 cm) spacing, .58 GPH (2 l/h), .170 ID x .250 OD ML-1012 1000’ (300 m), 12” (30 cm) spacing, .58 GPH (2 l/h), .170 ID x .250 OD ML-1006B 1000’ (300 m), 6” (15 cm) spacing, .58 GPH (2 l/h), .170 ID x .250 OD ML-1009B 1000’ (300 m), 9” (22.8 cm) spacing, .58 GPH (2 l/h), .170 ID x .250 OD ML-1012B 1000’ (300 m), 12” (30 cm) spacing, .58 GPH (2 l/h), .170 ID x .250 OD ML-3006 3000’ (900 m), 6” (15 cm) spacing, .58 GPH (2 l/h), .170 ID x .250 OD ML-3009 3000’ (900 m), 9” (22.8 cm) spacing, .58 GPH (2 l/h), .170 ID x .250 OD ML-3012 3000’ (900 m), 12” (30 cm) spacing, .58 GPH (2 l/h), .170 ID x .250 OD

www.digcorp.com

Color black black black brown brown brown black black black

Model ML-106 ML-109 ML-112 ML-106B ML-109B ML-112B ML-506 ML-509 ML-512 ML-506B ML-509B ML-512B

Description 100’ (30 m), 6” (15 cm) spacing, .58 GPH (2 l/h), .170 ID x .250 OD 100’ (30 m), 9” (22.8 cm) spacing, .58 GPH (2 l/h), .170 ID x .250 OD 100’ (30 m), 12” (30 cm) spacing, .58 GPH (2 l/h), .170 ID x .250 OD 100’ (30 m), 6” (15 cm) spacing, .58 GPH (2 l/h), .170 ID x .250 OD 100’ (30 m), 9” (22.8 cm) spacing, .58 GPH (2 l/h), .170 ID x .250 OD 100’ (30 m), 12” (30 cm) spacing, .58 GPH (2 l/h), .170 ID x .250 OD 500’ (150 m), 6” (15 cm) spacing, .58 GPH (2 l/h), .170 ID x .250 OD 500’ (150 m), 9” (22.8 cm) spacing, .58 GPH (2 l/h), .170 ID x .250 OD 500’ (150 m), 12” (30 cm) spacing, .58 GPH (2 l/h), .170 ID x .250 OD 500’ (150 m), 6” (15 cm) spacing, .58 GPH (2 l/h), .170 ID x .250 OD 500’ (150 m), 9” (22.8 cm) spacing, .58 GPH (2 l/h), .170 ID x .250 OD 500’ (150 m), 12” (30 cm) spacing, .58 GPH (2 l/h), .170 ID x .250 OD

Color

black

black

black

brown

brown

brown

black

black

black

brown

brown

brown

8


pc dripline speciFications:

excel™ pressure compensatinG (pc) driplines Excel™ series PC dripline is extruded linear low-density polyethylene dripline, containing cylindrical flow-regulated and self-flusing drip emitters inserted and welded into the wall of the polyethylene tubing in preset spacing. Both the tubing and the drip emitters are manufactured from the finest quality resins to ensure uniform emission from drip emitters year after year. Features: • Used for above or below grade installation • Two flow rates to provide maximum flexibility in a variety of applications • Flow-regulated; all drippers deliver equal flow in a wide range of operating pressures • Flow uniformity regardless of operating pressure and variation along the line • The dripper and the diaphragm are selfcontained units that are molded to the interior wall of the tubing • Turbulent flow through a large water passage to the labyrinth helps reduce clogging • Clogging resistance is due to the design of dripper’s filter intake area being continuously flushed by the water flow throughout the operation of the system • Two outlets per dripper ensures a reduced chance of clogging

PERFORMANcE 16 MM Pc DRIPlINE MAxIMuM lATERAl lENGTh (FEET) Dripper Flow rate .53 GPH Flow rate 1 GPH Spacing 12” 18” 24” 12” 18” 24” 15 PSI 106 25 PSI 228 35 PSI 285 45 PSI 335 * Flat terrain

135 334 426 498

165 462 565 655

98 188 218 245

122 265 320 365

138 345 411 463

PERFORMANcE 17 MM Pc DRIPlINE MAxIMuM lATERAl lENGTh (FEET) Dripper Flow rate .53 GPH Flow rate 1 GPH Spacing 15 PSI 25 PSI 35 PSI 45 PSI * Flat terrain

12” 132 295 358 395

18” 163 384 483 536

12” 114 216 257 298

18” 142 285 343 392

.53 GPH GPM GPH 0.88 53.0 0.58 35.3 0.44 26.5

ORDERING INFORMATION

• Made of low-density, UV-resistant, 7510 polyethylene resin with Finger Print™

ORDERING INFORMATION

Flow rate Vs. pressure 1.1 1.0

FLOW RATE (GPH)

.09 .08 .07 .06 .05 .04 .03 .02 .01 0

9

0

5

10

15

20

25

30

35

40

PRESSURE (PSI)

45

50

55

60

• Liner low-density polyethylene

1 GPH GPM GPH 1.66 100.0 1.11 66.6 0.83 50.0

• Flexible tubing for easy installation

1.2

Materials:

FlOw RATE PER 100 FEET Dripper flow rate Spacing 12” 18” 24”

• Resistant to chemicals and fertilizers commonly used in the landscape

• The dripline is marked with flow rate and size for easy identification

• Flow Rates: ° 53 GPH (2 l/h) Color Code-Orange ° 1 GPH (3.785 l/h) Color Code-Gray • Operating Pressure: 12-50 PSI (.8-3.5 Bar) • Drippers Colors: .53 GPH yellow and 1 GPH white • Dripline Color Code: Black and Brown • Dripline Spacing: 12”, 18”, 24” and 30” (30.5 cm, 45.7 cm, 60.9 cm and 76.2 cm) • Tubing Size: ° 1/2”, .550 ID x .640 OD (16 mm) ° 1/2”, .570 ID x .670 OD (17 mm) • Minimum Bending Radius: 5’ • Available in 100’, 500’ and 1000’ Coils (30m, 150m and 300 m) • Filter Requirement: 155 Mesh

Model A5-112P A5-118P A1-112P A1-118P A5-512P A5-518P A5-524P A1-512P A1-518P A1-524P A5-12P A5-18P A5-24P A1-12P A1-18P A1-24P

Description – 17 mm 100’, 12” spacing, .53 GPH, .670 OD 100’, 18” spacing, .53GPH, .670 OD 100’, 12” spacing, 1 GPH, .670 OD 100’, 18” spacing, 1 GPH, .670 OD 500’, 12” spacing, .53 GPH, .670 OD 500’, 18” spacing, .53 GPH, .670 OD 500’, 24” spacing, .53 GPH, .670 OD 500’, 12” spacing, 1 GPH, .670 OD 500’, 18” spacing, 1 GPH, .670 OD 500’, 24” spacing, 1GPH, .670 OD 1000’, 12” spacing, .53 GPH, .670 OD 1000’, 18” spacing, .53 GPH, .670 OD 1000’, 24” spacing, .53 GPH, .670 OD 1000’, 12” spacing, 1 GPH, .670 OD 1000’, 18” spacing, 1 GPH, .670 OD 1000’, 24” spacing, 1 GPH, .670 OD

Color brown brown brown brown brown brown brown brown brown brown brown brown brown brown brown brown

Model Description – 16 mm A5-112 100’, 12” spacing, .5 GPH, .640 OD A5-118 100’, 18” spacing, .5 GPH. .640 OD A5-124 100’, 24” spacing, .5 GPH, .640 OD A1-112 100’, 12” spacing, 1 GPH, .640 OD A1-118 100’, 18” spacing, 1 GPH. .640 OD A1-124 100’, 24” spacing, 1 GPH, .640 OD A5-512 500’, 12” spacing, 0.5 GPH, .640 OD A5-518 500’, 18” spacing, 0.5 GPH, .640 OD A5-524 500’, 24” spacing, 0.5 GPH, .640 OD A1-512 500’, 12” spacing, 1.0 GPH, .640 OD A1-518 500’, 18” spacing, 1.0 GPH, .640 OD A1-524 500’, 24” spacing, 1.0 GPH, .640 OD A5-12 1000’, 12” spacing, 0.5 GPH, .640 OD A5-18 1000’, 18” spacing, 0.5 GPH, .640 OD A5-24 1000’, 24” spacing, 0.5 GPH, .640 OD A1-12 1000’, 12” spacing, 1.0 GPH, .640 OD A1-18 1000’, 18” spacing, 1.0 GPH, .640 OD A1-24 1000’, 24” spacing, 1.0 GPH, .640 OD A1-30 1000’, 30” spacing, 1.0 GPH, .640 OD A1-36 1000’, 36” spacing, 1.0 GPH, .640 OD

Color black black black black black black black black black black black black black black black black black black black black

1.800.322.9146


pc dripline

Excel™ Series PC dripline is a new advance in PC dripline design. Excel Series PC dripline has self-flushing, flow-regulated inline emitters with a check valve molded into the inside wall of the tubing to help sustain an efficient irrigation system in a wide range of environments. Features: • Excel™ Series CV PC dripline can be installed above or below grade • Excel™ Series CV PC dripline is available with a check valve to prevent particles and debris from entering the dripper at the end of the irrigation cycle • Excel™ Series CV PC dripline inline emitters prevent drainage from the dripline when the water has been turned off • Available in two flow rates to provide maximum flexibility in a variety of applications

speciFication

Flow rate Vs. pressure 1.2 1.1 1.0 .09

FLOW RATE (GPH)

excel™ pressure compensatinG (pc) driplines with check ValVe (cV)

.08 .07 .06 .05 .04 .03 .02 .01 0

0

5

10

15

20

25

30

35

40

PRESSURE (PSI)

45

50

55

60

PERFORMANcE 17 MM Pc DRIPlINE MAxIMuM lATERAl lENGTh (FEET) Dripper Flow rate .53 GPH Flow rate 1 GPH Spacing 15 PSI 25 PSI 35 PSI 45 PSI

12” 132 295 358 395

18” 163 384 483 536

12” 114 216 257 298

18” 142 285 343 392

• Flow Rates and Dripper Color Codes ° .53 GPH (2 l/h) Color Code-Orange ° 1 GPH (3.785 l/h) Color Code-Gray • Operating Pressure: 12-50 PSI (.8-3.5 Bar) ° Check Valve Sealing Pressure: 1.5 PSI (.11 BAR) ° Check Valve Opening Pressure: 4.3 PSI (.3 BAR) • Dripline Color Code: Brown • Dripline Spacing: 12”, 18” and 24” (30.5 cm, 45.7 cm and 61 cm) • Tubing Size: 1/2”, .570 ID x .670 OD (17 mm) • Minimum Bending Radius: 5’ • Available in 100’, 500’ and 1000’ Coils (30m, 150m and 300 m) • Filter Requirement: 155 Mesh

FlOw RATE PER 100 FEET Dripper flow rate Spacing 12” 18” 24”

.53 GPH GPM GPH 0.88 53.0 0.58 35.3 0.44 26.5

1 GPH GPM GPH 1.66 100.0 1.11 66.6 0.83 50.0

Materials: • Liner Low-Density Polyethylene

• Flow-regulated; all drippers deliver equal flow at a wide range of operating pressures • Flow uniformity regardless of operating pressure and variation along the line • The dripper and the diaphragm are self contained units that are molded to the interior wall of the tubing • Turbulent flow through a large water passage in the labyrinth helps reduce clogging • Clogging resistance is due to the design of dripper’s filter intake area being continuously flushed by the water flow throughout the operation of the system • Two outlets per dripper ensures a reduced chance of clogging • Resistant to chemicals and fertilizers commonly used in the landscape • Flexible tubing for easy installation • The dripline is marked with flow rate and size for easy identification • Used with low-density, UV-resistant, 7510 polyethylene resin with a Finger Print™

www.digcorp.com

ORDERING INFORMATION Model Description – ALL .670 OD A5-112P-CV 100’, 12” spacing, .53 GPH A5-118P-CV 100’, 18” spacing, .53 GPH A1-112P-CV 100’, 12” spacing, 1 GPH A1-118P-CV 100’, 18” spacing, 1 GPH A5-512P-CV 500’, 12” spacing, .53 GPH A5-518P-CV 500’, 18” spacing, .53 GPH A5-524P-CV 500’, 24” spacing, .53 GPH A1-512P-CV 500’, 12” spacing, 1 GPH A1-518P-CV 500’, 18” spacing, 1 GPH A1-524P-CV 500’, 24” spacing, 1 GPH A5-12P-CV 1000’, 12” spacing, .53 GPH A5-18P-CV 1000’, 18” spacing, .53 GPH A5-24P-CV 1000’, 24” spacing, .53 GPH A1-12P-CV 1000’, 12” spacing, 1 GPH A1-18P-CV 1000’, 18” spacing, 1 GPH A1-24P-CV 1000’, 24” spacing, 1 GPH

Color brown brown brown brown brown brown brown brown brown brown brown brown brown brown brown brown

10


micro sprinklers, FoGGers and spray Jets Jet sprayers DIG’s micro sprayers can be used for a wide range of applications. Available in 90°, 180° and 360° coverage, with small to large diameter, for watering that requires small droplets with low precipitation rates. Features: • Color coded heads signify various spray patterns • Constructed of UV-resistant plastic material

speciFications:

• Flow Rates: 14 GPH (50 l/h) • Operating Pressure: 15-30 PSI (1-2 BAR) • Wetting Diameter: Up to 12’ (3.7 m) • Pattern: 360°, 180°, 90° • Nozzle Size: .031” • Available with Spike Assembly with 24” Distribution Tubing and Barb or 10/32 Thread • Filter Requirement: 120 Mesh

Pressure (PSI) 15 20 25 30

Pressure (baR) 1.0 1.4 1.8 2.0

360° (ft)

360° (m)

15 18 19 20

4.5 5.4 5.7 6.0

Flow Rate (GPH) 8.9 10.5 12.0 13.3

NOzzlE DIAMETER 180° 180° (ft) (m) 6.0 6.4 6.6 7.0

1.8 1.9 2.0 2.1

Features:

Features: • Adjustable full circle vortex spray jet with fine water droplets • Easy to install using attached barb with extra wide wings • Can be used with 1/4” distribution tubing (.150-.160 ID) • Adjustable flow, including shutoff • Removable cap for easy cleaning

speciFications:

• Flow Rate: 0-20 GPM (0-4.5 l/h) • Operating Pressure: 15-30 PSI (1-2 BAR) • Trajectory: 100° • Fully Open: Approximately 22 clicks • Filter Requirement: 120 Mesh

Flow Rate (GPH) 17.2 20.0 22.0 24.3

Diameter (ft) 9.0 11.0 12.2 13.3

Flow Rate (l/h) 33 39 45 50

90° (ft)

90° (m)

6.5 7.5 8.5 9.0

1.9 2.2 2.5 2.7

• Mini-valve can be adjusted to reduce flow and diameter • Available on 10/32 thread or completely assembled with spike and 12” PE riser with barb; no moving parts

speciFications:

• Adjustable Flow Rates: 0-31 GPH (0-117 l/h) • Operating Pressure: 10-30 PSI (.7-2.0 BAR) • Wetting Diameter: Up to 25’ (7.5 m) • Pattern: 360°, 180° and 90° • Trajectory Angle: Approximately 25° • Filter Requirement: 80 Mesh PERFORMANcE FlOw RATE vs. PREssuRE

PERFORMANcE FlOw RATE vs. PREssuRE Pressure (PSI) 15 20 25 30

PERFORMANcE FlOw RATE vs. PREssuRE

a-Jet

adJustaBle spray Jet

Press (PSI) 10 15 20 25 30

Flow (GPH) 0-16.7 0-21.0 0-24.5 0-28.0 0-31.0

Diameter (ft) 0-18.4 0-22.6 0-25.7 0-26.7 0-26.3

Radius (ft) 0-6.7 0-8.1 0-9.5 0-10.1 0-10.6

Radius (ft) 0-6.4 0-8.1 0-9.4 0-9.8 0-10.3

ORDERING INFORMATION

ORDERING INFORMATION Assembly Color 10/32 thread Spike assembly

11

90° black 07-001 07-025

180° blue 07-002 07-024

360° red 07-003 07-023

ORDERING INFORMATION Model 07-005

Description 360° on a 6” stake

Model 07-061 07-062 07-063 MA-136 MA-118 MA-109

Description 360° on 10/32 thread 180° on 10/32 thread 90° on 10/32 thread 360° on spike assembly 180° on spike assembly 90° on spike assembly

1.800.322.9146


micro sprinklers, FoGGers and spray Jets PERFORMANcE FlOw RATE vs. PREssuRE

exl series FoGGer The EXL fogger is ideal for misting and cooling. Small droplets create lower ambient temperature with low precipitation rate for better control of plants environment. Features: • Incorporates a vortex design, which spins the water droplets into a fine mist • Modular, lightweight and easy to install, maintain, and configure • Designed without a bridge, to prevent dripping • Three part construction with O-ring for a tight seal

mist sprayers Features: • Projects a fine mist

Nozzle colors Purple black Green brown Gray Nozzle size (inch) 0.010 0.013 0.020 0.025 0.035 Nom. flow rate .8 1 1.5 2 3 Diameter (ft) 2.5 2.5 3.5 3.5 4.0 Misting angle 70° 70° 70° 70° 80°

FlOw RATEs (GPh) 35 PSI 40 PSI 45 PSI 50 PSI 55 PSI 60 PSI 65 PSI

0.76 0.80 0.84 0.85 0.87 0.90 0.91

0.85 0.91 0.98 1.04 1.07 1.14 1.17

1.36 1.49 1.52 1.58 1.64 1.71 1.74

1.68 1.83 1.91 2.02 2.09 2.18 2.26

2.40 2.61 1.78 2.09 3.02 3.17 3.26

• Available on 1/2” FNPT, 1/4” barb or 10/32 thread

• Flat trajectory • Vortex mechanism allows for larger water passage to prevent clogging • Constructed of UV-resistant plastic material

speciFications:

• Flow Rates: 6.7-7.6 GPH (25.4-28.7 l/h) • Operating Pressure: 30-50 PSI (2.0-3.5 BAR) • Wetting Diameter: 5.4-7.2’ (1.7-2.2 m) • Pattern: 360° • Nozzle Size: 0.51” • Available with 10/32 Thread • Filter Requirement: 120 Mesh

speciFications:

• Flow Rates: .8-3 GPH (3 l/h-11.5 l/h) • Operating Pressure: 35-80 PSI (2.4-5.6 BAR) • Nominal Flow Rate at 50 PSI (3.5 BAR) • Wetting Diameter: Up to 4’ (1.2 m) • Nozzle Size: .10-.35” • Pattern: 360° • Trajectory Angle: 80-100° • Average Droplet Size: 60-100 Microns • Filter Requirement: 200 Mesh

PERFORMANcE FlOw RATE vs. PREssuRE

Pressure (PSI) (baR) 40 2.8 45 3.1 50 3.5

Flow Rate (GPH) (l/h) 6.7 25.0 7.1 26.8 7.4 28.0

Diameter (ft) (m) 5.4 1.55 5.4 1.55 7.2 2.06

Materials: • Body: Polyacetal • O-ring: Buna-N

ORDERING INFORMATION ORDERING INFORMATION Model 07-044 07-045 07-047 07-048 07-052 07-054

Description .8 GPH with barb 1 GPH with barb .8 GPH on 10/32 thread 1 GPH on 10/32 thread 2 GPH on 10/32 thread 3 GPH on 10/32 thread

www.digcorp.com

Color purple black purple black brown gray

Model 07-049 07-050 07-055 07-056 07-057 07-101 07-102 07-103

Description .8 GPH with 1/4” barbed elbow 1 GPH with 1/4” barbed elbow 1.5 GPH with 1/4” barbed elbow 2 GPH with 1/4” barbed elbow 3 GPH with 1/4” barbed elbow 1.5 GPH on 1/2” FNPT 2 GPH on 1/2” FNPT 3 GPH on 1/2” FNPT

Color purple black green brown gray green brown gray

ORDERING INFORMATION Model 07-006

Description Mist sprayer on 10/32 thread

12


micro sprinklers, FoGGers and spray Jets 8” & 12” pop-up micro sprayers

Materials:

Fan spray Jet

• Body and Piston: Semi-Rigid Polypropylene

The MP series pop-up micro sprayers are designed to provide solutions where low pressure and low flow-rate nozzles are required. Pop-ups are helpful where conventional sprinkler systems or drip irrigation would not be practical. The MP series utilizes double seals to ensure reliable operation and long-term performance.

• Seals: EPDM and Vinyl

Features:

180° – Spray Nozzle Color: Green, 0.060”

• 8” and 12” pop-up length • Unique design incorporates a pressure activated, low friction, upper stem seal and a second stage piston seal to ensure positive sealing • Can be installed on any size 1/2” polyethylene tubing • Can be used with 1/4” (.150-.160 ID) distribution tubing

• Base: High Impact Plastic • Spring: Stainless Steel 304 PERFORMANcE FlOw RATE vs. PREssuRE Pressure (PSI)

Flow Rate (GPM)

Features:

Radius (ft)

360° – Spray Nozzle Color: Red, 0.075” 15 20 25 30 15 20 25 30

0.45 0.52 0.57 0.63 0.31 0.36 0.41 0.45

3.5 4.0 4.5 5.0 3.5 4.0 4.5 5.0

90° – Spray Nozzle Color: Blue, 0.040” 15 20 25 30

0.15 0.18 0.21 0.23

The fan spray jets are of one piece construction and use a flat pattern and low flow for landscape and horticultural applications.

3.5 4.0 4.5 5.0

• Rugged materials can withstand adverse conditions • Install below grade

• Easy to install using the quick thread base and wide wing edges • Can be used with 1/4” (.150-.160 ID) distribution tubing • Color coded nozzles for easy identification

speciFications:

• Flow Rate: .15-.63 GPM (34-143 l//h) • Operating Pressure: 15-35 PSI (1-2.4 BAR) • Wetting Diameter: Up to 5’ (1.5 m) • Pattern and Color Codes: ° 90° Color Code - Blue ° 180° Color Code - Green ° 360° Color Code - Red • Nozzle Size: .40-.75” • Nominal Operating Pressure: 30 PSI (2.1 BAR) • Trajectory: Flat • Precipitation Rate: 2.0-2.8 inch/h • Filter Requirement: 120 Mesh

speciFications:

• Flow Rate: .15-.63 GPM (34-143 l/h) • Operating Pressure: 15-35 PSI (1-2.4 BAR) • Wetting Diameter: Up to 5’ (1.5 m) • Nominal Operating Pressure: 30 PSI (2.1 BAR) • Pop-Up Height: ° 8” (20.3 cm) or when up 13” (33 cm) ° 12” (30.5 cm) or when up 21” (53.34 cm) • Trajectory: Flat • Available with 1/2” NMPT Thread or 1/4” Barbed Side Outlet • Precipitation Rate: 2.0-2.8 inch/h • Filter Requirement: 120 Mesh ORDERING INFORMATION Model MP-801 MP-802 MP-803 MP-121 MP-122 MP-123 MP-804 MP-805 MP-806 MP-124 MP-125 MP-126

13

Description 1/2” MNPT inlet, 90° spray head with 8” pop-up 1/2” MNPT inlet, 180° spray head with 8” pop-up 1/2” MNPT inlet, 360° spray head with 8” pop-up 1/2” MNPT inlet, 90° spray head with 12” pop-up 1/2” MNPT inlet, 180° spray head with 12” pop-up 1/2” MNPT inlet, 360° spray head with 12” pop-up 1/4” barbed side inlet, 90° head with 8” pop-up 1/4” barbed side inlet, 180° head with 8” pop-up 1/4” barbed side inlet, 360° head with 8” pop-up 1/4” barbed side inlet, 90° head with 12” pop-up 1/4” barbed side inlet, 180° head with 12” pop-up 1/4” barbed side inlet, 360° head with 12” pop-up

ORDERING INFORMATION Model 07-080 07-081 07-082

Description 90° spray head 180° spray head 360° spray head

Color blue green red

1.800.322.9146


drip system components air relieF ValVe The air vacuum relief valve allows air to exit and enter the dripline laterals during initial system startup use, and prevents suction of debris into the drip emitters under vacuum conditions when the system is shut down. Features: • Large air passage • High resistance to chemicals • Smooth operation • Prevents vacuum and suction of dirt into the polyethylene tubing via the drippers

speciFications:

Flush ValVe DIG’s flush valves help to prevent accumulation of small particles at the end of the dripline or drip tubing during initial system pressure buildup by automatically opening and closing at the beginning and end of each irrigation cycle. Features: • Flushes small particles which have formed in the pipe at the starting and closing of the irrigation cycle • Reduces deposit build-up • Open and close at low pressure • Helps to prevent clogging of drippers

speciFications:

• Operating Pressure: Up to 140 PSI (9.8 BAR) • Temperature Range: Up to 130°F (54°C) • 1/2” MNPT

• Operating Pressure: 7-60 PSI (0.5-4.2 BAR) • Available with 3/4” FHT or FNPT • Opening Pressure: 2 or 4 PSI

Materials:

Materials:

• Plastic with Buna-N Seal

• Housing: High Impact Plastic

shut oFF ValVes Use DIG’s shut off valves for control of individual driplines and laterals. Features: • Inlet and outlet O-rings ensure watertight seals • Large handle for easy manual control • Rapid 1/4” turn on and off for tight, no drip, shut off

speciFications:

• Operating Pressure: Up to 60 PSI (4.2 BAR) • Temperature: Up to 130°F (54°C)

Materials: • Body: Polypropylene • O-ring: Buna-N

Dimensions: • 3.2” W x 1.8” H (8 cm W x 4.6 cm H)

• Springs: Stainless Steel 304 • O-ring: Natural Rubber BR

ORDERING INFORMATION Model 18-039 18-040

ORDERING INFORMATION Model 18-028

Description 1/2” air vacuum relief valve

www.digcorp.com

18-041 18-042

Description Automatic flush valve opened at 2 PSI, with 3/4” FHT swivel Automatic flush valve opened at 4 PSI, with 3/4” FHT swivel Automatic flush valve opened at 2 PSI, with 3/4” FNPT swivel Automatic flush valve opened at 4 PSI, with 3/4” FNPT swivel

ORDERING INFORMATION Model 28-004 28-006 28-007 28-018 28-012 28-013

Description 3/4” FNPT x 3/4” MNPT 3/4” FNPT x .600 barb (17 mm) .600 ID x .600 ID barb (17 mm) 3/4” FHT x MHT flush valve 3/4” FNPT x .520 barb (16 mm) .520 ID x .520 ID barb (16 mm)

14


drip system components drip Zone assemBly DIG’s 3/4” drip zone assemblies come with all the components necessary to start any drip or micro sprinkler installation. Each unit comes assembled with a 24 VAC valve, battery operated controller LEMA 1600 HE, DC or AC solenoid with filter and an adjustable or preset pressure regulator. Features: • Available with 24 VAC, 6-9 DC, battery operated or LEMA solenoid

speciFications:

• P39-075: ° 3/4” FNPT ° Downstream Pressure Range Adjusting from 12-35 PSI (.8-2.5 BAR) • P40-075, P50-075, P51-075 and P53-075: ° 3/4” FNPT x 3/4” MNPT ° Downstream Preset Pressure: 30 PSI (2 BAR) • Flow Rates: ° 3/4”: .1-12 GPM (.23-3.6 m3/h) • Operating Pressure: 10-125 PSI (.7-8.7 BAR) • Temperature Range: Up to 130°F (54°C) • Filtration Area: 11 Square Inches (71 cm2) • Weight: 1.5 Lbs. (.68 kg)

• Heavy duty glass reinforced nylon valve • Slow closing

Dimensions:

• Easy in-line maintenance

• 11.25” L x 9” H (28.5 cm L x 23 cm H)

• Large capacity filter • Completely assembled • Valve designed for compact enclosures • Single piece diaphragm • Valve with flow control and manual bleed • Available with adjustable or preset pressure regulator

ORDERING INFORMATION ORDERING INFORMATION Model P52-075

15

Description DC (LEIT) Assembly 3/4” FNPT x 3/4” MNPT

ORDERING INFORMATION Model P40-075 P53-075

Description 3/4” 24 VAC valve assembly preset DC (LEIT-2) 6-9 volt valve assembly

Model P39-075 P51-075

Description 3/4” 24 VAC valve assembly adjustable Battery operated valve assembly 3/4” FNPT x 3/4” MNPT

1.800.322.9146


drip system components adJustaBle pressure reGulators

preset pressure reGulators

Direct acting pressure regulators are specifically designed for use where accurate and reliable control of line pressure is required, regardless of fluctuations in upstream pressure and/or flow. The use of a rolling diaphragm completely separates the spring assembly from dirt or contaminants in the flow stream and provides long, trouble-free service while ensuring immediate response to flow and pressure variations.

Features: • Three preset pressures available • Flow rate from .1-15 GPM (6-900 GPH) • Reliable control regardless of fluctuation in upstream pressure or flow • Withstands severe water hammer • Can be installed above or below ground

Flow rate Vs. pressure

Features: • Adjustable with a single screw • Rolling diaphragm keeps the spring assembly free of debris

Inlet Pressure 20 Flow rate (GPM) 1 27 31 3 26 29 6 26 28 9 25 12 23

30 28 27 26 20 19

40 50 Outlet Pressure in PSI 32 28 32 29 33 31 27 31 27 31 31 26 31 27 31 26 20 26 20 26 26 20 26 20 26

60 29 27 27 20 20

speciFications:

• Reliable control regardless of fluctuations in upstream pressure or flow

speciFications:

• Flow Rates: .2-22 GPM (.045-5 m3/h) • Pressure Range: 12-60 PSI (.8-4 BAR) • Maximum Working Pressure: 125 PSI (8.6 BAR) • Weight: .75 lb (.34 kg) • 3/4” FNPT

PERFORMANcE FlOw RATE vs. PREssuRE

PERFORMANcE sPRING RATEs Downstream Operating Range Spring & Disc Color Min. PSI Max. PSI Model 18-007 Red 28 60 Model 18-008 White 12 35

• Flow Rates: .1-15 GPM (.22-3.4 m3/h) • Pressure Range: 20, 25 and 30 PSI (1.3, 1.7 and 2 BAR) • Maximum Recommended Flow: 10 GPM • Maximum Working Pressure: 80 PSI (5.5 BAR) • Weight: .20 lb (.09 kg) • 3/4” FNPT x 3/4” MNPT

Materials:

Materials:

• Body: Plastic

• Body: Plastic

• Spring: Stainless Steel 304

• Actuator: Plastic • Rolling Diaphragm: Nylon Reinforced Neoprene • Spring: Stainless Steel 304

Dimensions: • 4” H x 3.44” W (10 cm H x 19 cm W)

ORDERING INFORMATION ORDERING INFORMATION Model 18-008 18-007

www.digcorp.com

Description Adjustable pressure regulator 12-35 PSI Adjustable pressure regulator 28-60 PSI

Model 18-020 18-025 18-030

Description Preset pressure regulator 20 PSI Preset pressure regulator 25 PSI Preset pressure regulator 30 PSI

16

32 33 31 27 26


Filters ⁄4” and 1” plastic Filters with screen elements 3

Features: • Low friction loss

Size Inch 3/4 1

mm 20 25

• Interchangeable screen and disc elements with a wide range of filtration degrees

speciFications:

• Operating Pressure: Up to 120 PSI (8.4 BAR) • Temperature Range: Up to 130°F (54°C) • MNPT Inlet and Outlet or FHT x MHT

m3/h 3.4 4.0

in 1.5 1.5 1.5 1.5

mm 38 38 38 38

in 6 6 6 6

mm 152 152 152 152

H in 7 7 8 8

mm 177 177 203 203

Wt lb .457 .457 .489 .489

a

20

3/4" O-RING

16

bODY

1"

12

H

COVER SCREEN

8

L

O-RING CaP

4

D 0

• Color coded replacement screens

• Non-corrosive materials

GPM 13 18

in mm 4.71 120 4.74 120 4.71 120 4.74 120

O-RING

• Screens have excellent resistance to most common chemicals

• Easy maintenance: screen can be extracted from filter for easy cleaning

cm2 183 183

Inch 3/4 w/cap 1 w/cap 3/4 w/flush valve 1 w/flush valve

hEAD lOss IN PsI

• Wide range of polyester and stainless steel screens in 40-200 mesh

• Available with flush cap or flush valve

sq. inch 28.5 28.5

DIMENsIONs AND wEIGhT a D L

Size

24

HEAD LOSS (PSI)

Used for residential and commercial applications. P10 thru P19 filters have pressure ratings of up to 120 PSI. Simple and easy to operate, the filters provide reliable, lowmaintenance filtration for troublefree operation.

suRFAcE AREA AND FlOw RATE Filtration Max Recommended Size Surface area Flow Rates

Mesh

0

5

10

15 20 25 FLOW RATE (GPM)

30

40

FIlTRATION DEGREE AND MATERIAl Micron Material Color

80 120 155 200 40 80 120 155 200

180 130 100 80 400 180 130 100 80

stainless steel stainless steel stainless steel stainless steel polyester polyester polyester polyester polyester

blue brown green burgundy navy blue blue brown green burgundy

Filter Materials: • Housing: Polypropylene • O-ring: EPDM

Chemical Resistance: • Acids: ° Very good resistance depending on concentration and temperature. ° Excellent resistance to most mineral acids • Alkali: Limited resistance depending on concentration and temperature • Excellent resistance to low concentrated lyes. Not recommended for use in highly concentrated lyes

Screen Materials: • Cylinder: Polyester • Screen: Polyester or Stainless Steel 304 • O-ring: EPDM

ORDERING INFORMATION ORDERING INFORMATION

ORDERING INFORMATION Model P09-XXX P14-XXX P15-XXX

17

Description 3/4” FHT x MHT w/ polyester screen & flush cap 3/4” FHT x MHT w/ SS screen & flush cap 3/4” FHT x MHT w/ SS screen & flush valve

Model P10-XXX P11-XXX P12-XXX P13-XXX P16-XXX P17-XXX P19-XXX

Description 3/4” MNPT w/ polyester screen & flush cap 3/4” MNPT w/ SS screen & flush cap 3/4” MNPT w/ polyester screen & flush valve 3/4” MNPT w/ SS screen & flush valve 1” MNPT w/ polyester screen & flush cap 1” MNPT w/ SS screen & flush cap 1” MNPT w/ SS screen & flush valve

Model 17-401 17-402 17-403 17-404 17-405 17-412 17-413 17-414 17-415

Description Color 40 Mesh polyester screen navy blue 80 Mesh polyester screen blue 120 Mesh polyester screen brown 155 Mesh polyester screen green 200 Mesh polyester screen burgundy 80 Mesh stainless steel screen blue 120 Mesh stainless steel screen brown 155 Mesh stainless steel screen green 200 Mesh stainless steel screen burgundy

1.800.322.9146


Filters ⁄4” and 1” plastic Filters with disc elements 3

Features: • Sediments accumulate on the outer face of the stacked discs, allowing clean water to flow through the stacked discs and out the middle of the filter

Size

Size

Inch 3/4 1

mm 20 25

• Easy maintenance; the discs can be extracted for easy cleaning • Interchangeable disc and stainless steel screen elements provide a wide range of filtration degrees

speciFications:

• Operating Pressure: Up to 120 PSI (8.4 BAR) • Temperature Range: Up to 130°F (54°C) • 3/4” and 1” MNPT Inlet and Outlet

sq. inch 28 28

DIMENsIONs AND wEIGhT

Max Recommended Flow Rates

cm2 180 180

GPM 13 18

m3/h 3.4 4.0

Size Inch

a D L H Wt in mm in mm in mm in mm lb

3/4 1

4.71 120 1.5 38 4.74 120 1.5 38

6 6

152 7 177 .644 152 7 177 .638

a

hEAD lOss IN PsI SPIN O-RING 20

3/4"

bODY

16

COVER

SPRING CaP O-RING

D

4

5

10

15 20 25 30 FLOW RATE (GPM)

40

50

FIlTRATION DEGREE AND MATERIAl

Mesh

L

SLEEVE

8

0

H

DISK

1"

12

• Disc elements provide in-depth filtration to retain organic matter • Discs have excellent resistance to most common chemicals

Filtration Surface area

24

HEAD LOSS (PSI)

Designed to be used with disc elements for greater operation efficiency. Series P30 and P31 filters provide a reliable, low-maintenance solution for any low-volume irrigation application.

suRFAcE AREA AND FlOw RATE

Disc Materials: • Grooved Discs: Polypropylene

Micron

Material

Color

• Disc Cylinder Assembly: Polypropylene

180 130 100

polypropylene polypropylene polypropylene

blue red black

• Tightening Spring: Stainless Steel 304

80 120 150

Filter Materials: • Housing: Polypropylene • O-ring: EPDM

ORDERING INFORMATION ORDERING INFORMATION Model Description P30-XXXD 3/4” MNPT with disc elements and flush cap

www.digcorp.com

ORDERING INFORMATION Model Description P31-XXXD 1” MNPT with disc elements and flush cap

Model 17-432 17-433 17-434

Description 80 Mesh disc set 120 Mesh disc set 150 Mesh disc set

Color yellow red black

18


Filters Size

• Easy maintenance: screen can be extracted from filter for easy cleaning

cm2 552 670

GPM 50 80

m3/h 11.3 18.1

speciFications:

• Operating Pressure: Up to 120 PSI (8.4 BAR) • Temperature Range: Up to 130°F (54°C) • 1 1/2” and 2” MNPT Inlet and Outlet

a

Inch 1 1/2” long 2”

D

L

H

Wt

in mm in mm in mm in mm lb 10.1 257 3.1 80 8.6 220 9.4 240 2.3 10.1 257 3.1 80 10.4 265 10.6 270 2.6

a

bODY O-RING SPINE

7.22

H

RINGS

L

SPRING

5.88 4.35

O-RING CaP

2.88

D

Chemical Resistance: 1.44

• Acids: ° Very good resistance depending on concentration and temperature.

0.72

• Non-corrosive materials • 1 1/2” long and 2” filter screens are interchangeable with a disc cartridge

Size

O-RING

Rec

• Color coded replacement screens

sq. inch 85 103

14.4 13.0

HEAD LOSS (PSI)

• Screens have excellent resistance to most common chemicals

Size

Max Recommended Flow Rates

hEAD lOss IN PsI

Features: • Wide range of stainless steel screens in 80-200 mesh

Filtration Surface area

Inch mm 1 1/2” Long 38 2” 50

Used for residential, commercial and nursery applications. P75 and P80 screen filters provide a quick solution for a wide range of irrigation applications.

• Low friction loss

DIMENsIONs AND wEIGhT

suRFAcE AREA AND FlOw RATE

om Ranmend ge ed

11⁄2” and 2” plastic Filters with stainless steel screens

0.43

22

44 60 88 131 FLOW RATE (GPM)

263

FIlTRATION DEGREE AND MATERIAl

Mesh 80 120 155 200

Micron

Material

Color

180 130 100 80

stainless steel stainless steel stainless steel stainless steel

blue brown green burgundy

° Excellent resistance to most mineral acids • Alkali: Limited resistance depending on concentration and temperature • Excellent resistance to low concentrated lyes. Not recommended for use in highly concentrated lyes

Screen Materials: • Cylinder: Polyester • Screen: Polyester or Stainless Steel

Filter Materials:

• O-ring: EPDM

• Housing: Polypropylene • O-ring: EPDM • Pressure Testing Port: Polypropylene • Pressure Testing Seals: Natural Rubber BR

ORDERING INFORMATION

ORDERING INFORMATION Model Description P75-XXXI 1 1/2” MNPT long with SS screen and flush cap

19

ORDERING INFORMATION Model Description P80-XXXI 2” MNPT with SS screen and flush cap

Model 17-080L 17-120L 17-155L 17-200L 17-085 17-125 17-160 17-205

Description 80 Mesh stainless steel, 1 1/2” long 120 Mesh stainless steel, 1 1/2” long 155 Mesh stainless steel, 1 1/2” long 200 Mesh stainless steel, 1 1/2” long 80 Mesh stainless steel, 2” 120 Mesh stainless steel, 2” 155 Mesh stainless steel, 2” 200 Mesh stainless steel, 2”

Color Blue Brown Green Burgundy Blue Brown Green Burgundy

1.800.322.9146


Filters 11⁄2” and 2” plastic Filters with disc elements The P75 and P80 are compact and cost effective disc filters with outstanding performance in a wide variety of situations and irrigation conditions.

suRFAcE AREA AND FlOw RATE

Size

Filtration Surface area

Size

Inch mm 1 1/2” Long 38 2” 50

sq. inch cm2 60 385 79 520

GPM 40 60

hEAD lOss IN PsI 14.4 13.0

O-RING CaP

1.44

H

Wt

a

H L

FIlTRATION DEGREE AND cOlOR

Rec

40 80 120 150

.144 8

13

D

Mesh

• Discs have excellent resistance to most common chemicals

• Interchangeable disc and stainless steel screen elements provide a wide range of filtration degrees

L

O-RING

SPRING

• Hydraulic pressure during the filtering process causes fastening of the disc and allows for efficient filtering

• Easy maintenance; the discs can be extracted for easy cleaning

D

in mm in mm in mm in mm lb 10.1 257 3.1 80 8.6 220 9.4 240 2.3 10.1 257 3.1 80 10.4 265 10.6 270 2.6

RINGS

om Ranmend ge ed

• Disc elements provide in-depth filtration to retain organic matter

a

Inch 1 1/2” long 2”

O-RING SPINE

5.88

HEAD LOSS (PSI)

• Sediments accumulate on the outer face of the stacked discs allowing clean water to flow through the stacked discs and out the middle of the filter

m3/h 9.0 13.6

Size

bODY

7.22

Features:

DIMENsIONs AND wEIGhT

Max Recommended Flow Rates

22 30 44 60 88 FLOW RATE (GPM)

Micron

Material

Color

400 180 130 100

polypropylene polypropylene polypropylene polypropylene

blue yellow red black

Filter Materials: • Housing: Polypropylene • O-ring: EPDM • Pressure Testing Ports: Polypropylene • Pressure Testing Seals: Natural Rubber BR

speciFications:

• Operating Pressure: Up to 120 PSI (8.4 BAR) • Temperature Range: Up to 130°F (54.4°C) • MNPT Inlet and Outlet

Disc Materials: • Grooved Discs: Polypropylene • Disc Cylinder Assembly: PBT • Tightening Spring: Stainless Steel 304

ORDERING INFORMATION

ORDERING INFORMATION Model Description P75-XXXDLI 1 1/2” (long) MNPT disc filter

www.digcorp.com

ORDERING INFORMATION Model Description P80-XXXDI 2” MNPT disc filter

Model 17-040D 17-041D 17-042D 17-043D 17-044D 17-045D 17-046D 17-047D

Description 40 Mesh, 1 1/2” long disc set 80 Mesh, 1 1/2” long disc set 120 Mesh, 1 1/2” long disc set 150 Mesh, 1 1/2” long disc set 40 Mesh, 2” disc set 80 Mesh, 2” disc set 120 Mesh, 2” disc set 150 Mesh, 2” disc set

Color blue yellow red black blue yellow red black

20


poly and distriBution tuBinG ⁄8” and 1⁄4” Vinyl distriBution tuBinG 1

Features:

⁄8” and 1⁄4” polyethylene distriBution tuBinG 1

⁄2” thru 1” polyethylene tuBinG 1

Features:

• 1/8” used with TOP 12-outlet emitters

Features:

• UV-resistant • Made of high quality material

• 500’, 1000’ and 3000’ coils come on cardboard cores

• May be used above or below ground

• 500’, 1000’ and 3000’ coils come on cardboard cores

• Made of low-density 7510 Union Carbide UV-resistant poly resin material

• Minimum 2% carbon black added for maximum UV protection

speciFications:

• Operating Pressure: Up to 30 PSI (2.1 BAR) • Sizes: ° 1/8”: .118 ID x .187 OD ° 1/4”: .156 ID x .245 OD • Stiffness: 90 Shore

Material:

• Made of low-density 7510 Union Carbide UV-resistant poly resin material

• Available in a wide range of coil lengths

speciFications:

• Operating Pressure: Up to 30 PSI (2.1 BAR) • Sizes: ° 1/8”: .125 ID x .187 OD ° 1/4”: .170 ID x .250 OD

Material: • Fingerprint™ 7010 Polyethylene

speciFications:

• Operating Pressure: Up to 60 PSI (4.2 BAR) • Sizes: ° 1/2” Available in 3 Configurations: • .520 ID x .620 OD • .600 ID x .700 OD • .615 ID x .710 OD ° 3/4”: .820 ID x .940 OD ° 1”: 1.060 ID x 1.200 OD

• Vinyl

Material: • Fingerprint™ 7510 Polyethylene

ORDERING INFORMATION

ORDERING INFORMATION ORDERING INFORMATION Model 12-006 12-042 12-043 12-019 12-002 12-049 12-013 12-005 12-050 12-015

21

Description 100’ 1/8” black vinyl .118 ID x .187 OD 500’ 1/8” black vinyl .118 ID x .187 OD 1000’ 1/8” black vinyl .118 ID x .187 OD 3000’ 1/8” black vinyl .118 ID x .187 OD 100’ 1/4” brown vinyl .156 ID x .245 OD 500’ 1/4” brown vinyl .156 ID x .245 OD 100’ 1/4” black vinyl .156 ID x .245 OD 500’ 1/4” black vinyl .156 ID x .245 OD 1000’ 1/4” black vinyl .156 ID x .245 OD 3000’ 1/4” black vinyl .156 ID x .245 OD

Model 12-036 12-075 12-080 12-085 12-055 12-056 12-057 12-038 12-041 12-060 12-065

Description 100’ 1/8” black poly .125 ID x .187 OD 500’ 1/8” black poly .125 ID x .187 OD 1000’ 1/8” black poly .125 ID x .187 OD 3000’ 1/8” black poly .125 ID x .187 OD 100’ 1/4” black poly .160 ID x .220 OD 500’ 1/4” black poly .160 ID x .220 OD 1000’ 1/4” black poly .160 ID x .220 OD 100’ 1/4” black poly .170 ID x .250 OD 500’ 1/4” black poly .170 ID x .250 OD 1000’ 1/4” black poly .170 ID x .250 OD 3000’ 1/4” black poly .170 ID x .250 OD

Model Description 14-011 500’ 1” black poly 1.06 ID x 1.20 OD 14-002 500’ 3/4” black poly .820 ID x .940 OD 14-004 50’ 1/2” black poly .600 ID x .700 OD 14-005 100’ 1/2” black poly .600 ID x .700 OD 14-006 200’ 1/2” black poly .600 ID x .700 OD 14-007 500’ 1/2” black poly .600 ID x .700 OD 14-008 1000’ 1/2” black poly .600 ID x .700 OD 31-004 50’ 1/2” black poly .520 ID x .620 OD 31-005 100’ 1/2” black poly .520 ID x .620 OD 31-006 200’ 1/2” black poly .520 ID x .620 OD 31-007 500’ 1/2” black poly .520 ID x .620 OD 31-008 1000’ 1/2” black poly .520 ID x .620 OD 31-010 100’ 1/2” black poly .615 ID x .710 OD 31-011 200’ 1/2” black poly .615 ID x .710 OD 31-012 500’ 1/2” black poly .615 ID x .710 OD 31-013 1000’ 1/2” black poly .615 ID x .710 OD 14-011 250’ 1” black poly 1.060 ID x 1.200 OD 14-012 500’ 1” black poly 1.060 ID x 1.200 OD

1.800.322.9146


FittinGs uniVersal 1⁄2” nut lock FittinGs

series 450, 620, 700 and 710 compression FittinGs

Features:

Features:

• Fits .620, .700 and .710 tubing (16 mm and 17 mm)

• High impact plastic

• Three part construction

• Color coded • UV-resistant

• Threaded nut for easy assembly

• Secure and easy installation without glues or clamps

• Available in four different configurations

• UV-resistant

• Fits all DIG 16 and 17 mm dripline and 1/2” polyethylene tubing .450, .620, .700 and .710 OD)

speciFications:

• Operating Pressure: 60 PSI (4.2 BAR)

speciFications:

Materials:

• Operating Pressure: Up to 60 PSI (4.2 BAR)

• Body and Nut: Polypropylene

Materials: • Body: ABS • Inserts: Polycarbonate

ORDERING INFORMATION

Model 24-012 24-002 15-004 15-014 15-003 15-009 15-010 24-015 24-003 15-006 15-016 24-013 24-004 15-007 15-015 24-014

Description .450 OD coupling with red insert .620 OD coupling with green insert .700 OD coupling with black insert .710 OD coupling with blue insert .700 OD x .710 OD reducing coupling .700 OD x .620 OD reducing coupling .700 OD x .450 OD reducing coupling .450 OD tee with red insert .620 OD tee with green insert .700 OD tee with black insert .710 OD tee with blue insert .450 OD elbow with red insert .620 OD elbow with green insert .700 OD elbow with black insert .710 OD elbow with blue insert .700 OD x .700 OD x .450 OD reducing tee

www.digcorp.com

• Barb: Acetal ORDERING INFORMATION Model Description 24-016 .450 OD 3/4” FHT swivel adapter with screen 24-001 .620 OD 3/4” FHT swivel adapter with screen 15-005 .700 OD 3/4” FHT swivel adapter with screen 15-017 .710 OD 3/4” FHT swivel adapter with screen 24-017 .450 OD 3/4” FHT swivel adapter with washer 24-010 .620 OD 3/4” FHT swivel adapter with washer 15-020 .700 OD 3/4” FHT swivel adapter with washer 15-021 .710 OD 3/4” FHT swivel adapter with washer 24-028 .620 OD 3/4” FNPT swivel adapter with screen 24-029 .700 OD 3/4” FNPT swivel adapter with screen 24-030 .710 OD 3/4” FNPT swivel adapter with screen 24-006 .620 OD 3/4” FNPT swivel adapter with washer 15-024 .700 OD 3/4” FNPT swivel adapter with washer 15-023 .710 OD 3/4” FNPT swivel adapter with washer 24-018 .450 OD 3/4” FHT end cap with red insert 24-005 .620 OD 3/4” FHT end cap with green insert 15-012 .700 OD 3/4” FHT end cap with black insert 15-018 .710 OD 3/4” FHT end cap with blue insert 24-024 .450 OD 3/4” MPT adapter with red insert 24-025 .620 OD 3/4” MPT adapter with green insert 24-026 .700 OD 3/4” MPT adapter with black insert 24-027 .710 OD 3/4” MPT adapter with blue insert 24-020 .450 OD 3/4” MHT adapter with red insert 24-021 .620 OD 3/4” MHT adapter with green insert 24-022 .700 OD 3/4” MHT adapter with black insert 24-023 .710 OD 3/4” MHT adapter with blue insert 24-007 .620 OD 3/4” FHT swivel tee with screen 15-008 .700 OD 3/4” FHT swivel tee with screen 15-022 .710 OD 3/4” FHT swivel tee with screen 24-058 .620 OD 3/4” FHT swivel tee with washer 24-059 .700 OD 3/4” FHT swivel tee with washer 24-060 .710 OD 3/4” FHT swivel tee with washer 24-061 .620 OD 3/4” MHT tee with green insert 24-062 .700 OD 3/4” MHT tee with black insert 24-063 .710 OD 3/4” MHT tee with blue insert 24-064 .620 OD 3/4” FNPT swivel tee with washer 24-065 .700 OD 3/4” FNPT swivel tee with washer 24-066 .710 OD 3/4” FNPT swivel tee with washer 24-081 .450 OD 3/4” FHT flush valve, low pressure 24-082 .620 OD 3/4” FHT flush valve, low pressure 24-083 .700 OD 3/4” FHT flush valve, low pressure 24-084 .710 OD 3/4” FHT flush valve, low pressure 24-085 .450 OD 3/4” FHT flush valve, high pressure 24-086 .620 OD 3/4” FHT flush valve, high pressure 24-087 .700 OD 3/4” FHT flush valve, high pressure 24-088 .710 OD 3/4” FHT flush valve, high pressure

ORDERING INFORMATION Model 15-055 15-056 15-057 15-058

Description Universal coupling Universal elbow Universal tee Universal swivel tee with washer

22


FittinGs ⁄2” BarB FittinGs

1

⁄4” BarB FittinGs

1

Features:

Features:

• High impact plastic

• Secure and easy installation without glue or clamps

• UV-resistant • For secure and easy installation without glue or clamps

• Large inside diameter for maximum flow

• Fits all DIG dripline and polyethylene tubing with 16 and 17 ID (.550-.620 ID)

• UV-resistant

• One piece construction • Fits 1/4” (.145-.190 ID) distribution tubing

• Available with a combination of threads and barbs

speciFications:

• One piece construction

• Operating Pressure: Up to 30 PSI (2.1 BAR)

speciFications:

• Operating Pressure: Up to 30 PSI (2.1 BAR)

Material: • Acetal

Material: • Acetal

ORDERING INFORMATION

ORDERING INFORMATION Model 15-030 15-040 15-031 15-041 15-032 15-042

23

Description .520 ID (16 mm) insert Coupling .600 ID (17 mm) insert Coupling .520 ID (16 mm) insert Tee .600 ID (17 mm) insert Tee .520 ID (16 mm) insert Elbow .600 ID (17 mm) insert Elbow

Model 15-033 15-043 15-034 15-044 15-035 15-045 15-036 15-046 15-037 15-047 15-038 15-048 15-039 15-049

Description .520 ID (16 mm) 1/2” male adapter tee x barb .600 ID (17 mm) 1/2” male adapter tee x barb .520 ID (16 mm) 3/4” male adapter tee x barb .600 ID (17 mm) 3/4” male adapter tee x barb .520 ID (16 mm) 3/4” female adapter tee x barb .600 ID (17 mm) 3/4” female adapter tee x barb .520 ID (16 mm) 1/2” male adapter x barb .600 ID (17 mm) 1/2” male adapter x barb .520 ID (16 mm) 1/2” elbow male adapter x barb .600 ID (17 mm) 1/2” elbow male adapter x barb PVC single starter connector with O-ring .520 ID (16 mm) PVC single starter connector with O-ring .600 ID (17 mm) 3/4” male adapter x 16 mm .520 ID 3/4” male adapter x 17 mm .600 ID

ORDERING INFORMATION Model 25-001 25-002 25-003 25-004

Description 1/4” long barb 1/4” tee 1/4” elbow 1/4” short barb

1.800.322.9146


accessories ⁄4” in-line shut oFF ValVe 1

Features: • Adjusts flow from 0-25 GPH (0-95 l/h) • High impact plastic • UV-resistant • For secure and easy installation without glue or clamps • Fits all 1/4” distribution tubing

speciFications:

• Flow Rates: 25 GPH (95 l/h) • Operating Pressure: Up to 30 PSI (2.1 BAR) • Maximum Head Loss: 6 PSI (.4 BAR)

shruB adapter

punches

Features:

Features:

• For installing a dripper or spray jet on a 1/2” riser

• Used to puncture holes when installing drippers and micro sprinklers in polyethylene tubing • Easy grip handle constructed of durable plastic and non-corrosive materials • Pro punch and deluxe punch pins can be replaced • Deluxe punch cuts 1/2” polyethylene tubing and 1/4” distribution tubing with cutter in handle

• Available with 10/32 thread or barb • UV-resistant

speciFications:

• Operating Pressure: Up to 30 PSI (2.1 BAR) • 1/2” FNPT x 10/32 Thread • 1/2” FNPT x 1/4” barb

ORDERING INFORMATION Model Description 16-020 Small punch 16-035 Pro punch with 3 mm pin 16-045 Pro punch with 4 mm pin 16-065 Deluxe punch with cutter 16-066 Insertion tool for .250-.270 OD micro tubing

ORDERING INFORMATION ORDERING INFORMATION Model 16-007 16-028

Description In-line shut off valve with 1/4” barb In-line shut off valve with 10/32 thread

hose end & GooF pluGs

Model Description 16-034 Shrub adapter with 10/32 x 1/2” FNPT 16-054 Shrub adapter with press-fit tee 16-056 Shrub adapter with press-fit barb

pVc inserts

threaded FittinGs

Features:

Features:

Hose End Features:

• Glues into the slip side of any 1/2” PVC fitting

• Hose or pipe thread male and female

• Small and large hose ends for easy insertion

• UV-resistant

• UV-resistant • Made of polypropylene • Operating Pressure: up to 60 PSI

speciFications:

• Operating Pressure: Up to 80 PSI (5.5 BAR)

Goof Plug Features:

speciFications:

• Operating Pressure: Up to 80 PSI (5.6 BAR) • 3/4” MNPT or 3/4” MHT • 3/4” FNPT or 3/4” FHT

• Used to plug holes in mainline or to stop flow out of the end of 1/4” distribution tubing

ORDERING INFORMATION ORDERING INFORMATION Model 16-015 16-021 16-022

Description 3/4” hose end 1/2” hose end Goof plug, strip of 10

www.digcorp.com

Model 24-008 15-067 15-013 15-019 16-018

Description Insert for 1/2” .620 OD Insert for 1/2” .670 OD Insert for 1/2” .700 OD Insert for 1/2” .710 OD Insert for 3/4” .930 OD

Color green brown black blue black

ORDERING INFORMATION Model 16-003 16-010 16-013 16-014

Description Swivel adapter 3/4” FHT x MNPT with washer Nipple 3/4” MHT x MNPT Cap 3/4” FHT with washer Cap 3/4” FNPT with washer

24


accessories stakes Features:

semi riGid pe riser assemBly on stake

semi riGid pe riser assemBly

• High impact plastic

Features:

Features:

• UV-resistant

• Pre-assembled with rigid polyethylene (PE) riser (.160 ID x .300 OD)

• Pre-assembled with rigid polyethylene (PE) riser (.160 ID x .300 OD)

• For secure and easy installation of 1/2” polyethylene and 1/4” distribution tubing • Flow rate on stake is adjustable to off • Stake with flow adjustment available with 10/32 thread

• Flow rate on stake is adjustable to off • Constructed of UV-resistant plastic material

ORDERING INFORMATION Model 16-011 16-016 16-017 16-023 16-025 16-043

Description Stake for 1/2” polyethylene tubing “V” Stake 6” stake with barb for 1/8” polyethylene tubing 4” stake 13” clip spike Adjustable stake with 10/32 thread

• Constructed of UV-resistant plastic material

ORDERING INFORMATION Model 16-046 16-047 16-048 16-049 16-108 16-112

Description 8” PE riser with clip spike assembly 10” PE riser with clip spike assembly 12” PE riser with clip spike assembly 16” PE riser with clip spike assembly 8” PE riser with adjustable stake assembly 12” PE riser with adjustable stake assembly

ORDERING INFORMATION Model 16-030 16-036 16-038 16-044 16-208 16-212

Description 6” semi-rigid PE riser with barb 8” semi-rigid PE riser with barb 12” semi-rigid PE riser with barb 16” semi-rigid PE riser with barb 1/2” MNPT adapter assembly with 8” PE riser 1/2” MNPT adapter assembly with 12” PE riser

pop-up riser assemBly Features: • Available in 8” or 12” with 1/2” MNPT or with 1/4” barb • Unique design incorporates a pressure activated, low friction, upper stem seal and a second stage piston seal to insure positive sealing • 1/4” side outlet can be used with 1/4” (.150-.170 ID) distribution tubing and installed on any polyethylene tubing

speciFications:

• Operating Pressure: 15-35 PSI (1-2.5 BAR) • Overall Body and Stem Height: Long: 13” (33 cm) Short: 9” (22 cm) • Extension Height: ° 8” Pop-Up = 5” (12 cm) Total 13” (33 cm) ° 12” Pop-Up = 9” (22 cm) Total 21” (53.34 cm) • Filter Requirement: 120 Mesh

25

ORDERING INFORMATION Model 16-508 16-509 16-510 16-511

Description 8” Pop-up riser with 1/4” barb 12” Pop-up riser with 1/4” barb 8” Pop-up with 1/2” MNPT 12” Pop-up with 1/2” MNPT

1.800.322.9146


swiVel FittinGs ⁄4” thru 2” swiVel FittinGs For maniFold assemBly 3

DIG high-pressure polypropylene swivel fittings are designed for ease of assembly, repair and addition of valves without glue, pipe tape, teflon tape or special tools.

speciFications:

• Operating Pressure: Up to 120 PSI (8.4 BAR) • Temperature Range: Up to 150°F (65°C) • Available Sizes: ° 1”, 1 1/2” and 2” Swivel FNPT ° 3/4”, 1”, 1 1/2” and 2” MNPT

Materials: • Body and Swivel: Polypropylene UV • O-ring: Nitril Rubber

Features: • Quick assembly of valve manifolds • Easy disassembly for valve repair

ORDERING INFORMATION Model 23-302 23-303 23-304

• No tools or glue required • Various configurations for different manifold designs

Description 2 outlet 1” swivel manifold 3 outlet 1” swivel manifold 4 outlet 1” swivel manifold

• Encapsulated Nitril rubber O-ring prevents leaks on the swivel adapter • Large caps can be easily tightened by hand

ORDERING INFORMATION

ORDERING INFORMATION Model 23-012 23-014 23-015 23-150 23-200

Description Nipple, 1” M x 1” M Nipple, 1” M x 1” M with one O-ring Nipple, 1” M x 3/4” M with one O-ring on 3/4” side Nipple with O-ring, 1-1/2” M x 1-1/2” M Nipple with O-ring, 2” M x 2” M

www.digcorp.com

Model 23-001 23-002 23-003 23-004 23-005 23-006 23-007 23-008 23-009 23-010 23-011

Description Swivel end cap with O-ring, 1” F Swivel coupling, 1” F x 1” F Swivel adapter, 1” F x 1” M Swivel adapter, 1” F x 3/4” M Swivel tee, 1” F x 1” F x 1” M Swivel elbow, 1” F x 1” F Swivel street elbow, 1” F x 1” M Swivel street elbow, 1” F x 3/4” M Swivel cross, 1” F x 1” F x 1” F x 1” F Swivel cross, 1” F x 1” F x 1” F x 1” M Swivel cross, 1” F x 1” F x 1” F x 3/4” M

ORDERING INFORMATION Model 23-152 23-153 23-150 23-202 23-203

Description Swivel adapter, 1-1/2” F x 1-1/2” M Swivel end cap with O-ring, 1-1/2” F Nipple with O-ring, 1-1/2” M x 1-1/2” M Swivel adapter, 2” F x 2” M Swivel end cap, with O-ring, 2” F

26


ac controllers and ValVes Four and six station irriGation and propaGation controllers Designed for residential, light commercial and propagation use, DIG 5000 series indoor controllers feature independent programming for each valve, four start times per day per valve, cycles up to 30 days, watering durations as short as 1 minute and up to 12 hours. Each offers a wide range of flexible programs and down time protection. 5000 series controllers are truly unique in their class. Features: • Watering durations from 1 minute to 12 hours in 1 second increments

electrical speciFications: • Input Required: 120 VAC, 60Hz • Output: 24 VAC, 0.27A • Maximum Output: 0.83A • Capacity: Two 24 VAC Solenoid Per Station • One Terminal for Sensor Connection • Sensor Override: Allows Sensor Bypass Regardless of Sensor Status

Watering schedules can be set according to four different programs: 1) Standard watering cycle: weekly 2) Cyclical watering cycle: From once per 1 day up to once every 30 days 3) Repeat watering cycle: From once per 1 hour to once per 23 hours 4) Repeat watering cycles within scheduled hourly cycles, placed with a window to start and end at any time of the day.

° Independent programming of start time, run time and day of the week for each valve • Automatic, semi-automatic and manual modes for each program • Rain delay up to 30 days with auto restart

Features: • 1” swivel inlet and outlet for quick installation • Operating pressure: 10-150 PSI (.7-10 BAR) • Slow closing internal manual bleed • High flow with low pressure loss • Easy in-line maintenance • Heavy duty glass reinforced nylon valve • Heavy duty polypropylene swivel fittings • Easy to expand when adding additional valves

electrical speciFications:

• Standard Voltage: 24 VAC (50-60 Cycles) • Current: 0.32A (7.7VA) Inrush, 0.16A (3.84VA) Holding • Power Consumption (watts): 1.7/2.2

speciFications:

• Four start times per program per valve • 7 day programming schedule or one to 30 days

ValVe assemBly with swiVel FittinGs

Materials: • Body and Core: ABS

Controller Dimensions: • 4” W x 1.5” D x 6.25” H (10 cm W x 3.8 cm D x 16 cm H)

• 4 buttons with large integrated liquid crystal display (LCD)

• Flow Rates: .2-35 GPM for Each Valve (.045-8 me/h) • Operating Pressure: 10-150 PSI (.7-10.5 BAR) • Water Temperature: Up to 150°F (65°C) • 1” FNPT Swivel Inlets and Outlets • 24 VAC (50-60 Cycles)

Valve Dimensions: • Three Valve Assembly: 10.125” W x 4” H x 10.5” L (25.7 cm W x 10 cm H x 26.5 cm L)

• Easy to read AM/PM clock • One 9-volt backup battery

• Four Valve Assembly: 13.5” W x 4” H x 10.5” L (34.3 cm W x 10 cm H x 26.5 cm L)

• Automatic short circuit detection isolates the shorted valve, continues irrigation cycle and gives visible alarm • Start time stacking prevents hydraulic overload • Can operate two valves at a time • Master valve remote pump start program: after prolonged power interruption, each station will operate for 10 minutes • Rain or moisture sensor terminal hook up

ORDERING INFORMATION Model 5004-I 5006-I 5006-IP

27

Description 4-station indoor AC controller 6-station indoor AC controller 6-station indoor AC propagation controller

ORDERING INFORMATION Model P39-203 P39-204

Description 3 valve assembly 4 valve assembly

1.800.322.9146


ac controllers and ValVes ⁄4”, 1”, 11⁄2” and 2” plastic in-line ValVes 3

Designed for commercial and residential use, series 33-xxx plastic in-line globe valves range in size from 3/4” to 2”. Made of reinforced nylon and non-corrosive material, the 33-xxx series designed for reliability in a variety of demanding applications. Valve Features: • Constructed of glass reinforced nylon with a stainless steel spring; non-corrosive materials • High flow with low pressure loss • Normally closed • Electric or manual operation

speciFications:

• Flow Rates: ° 3/4”: .1-28 GPM (.23-6.4 m3/h) ° 1”: 2-35 GPM (.45-8 m3/h) ° 1 1/2”: 20-140 GPM (4.5-36 m3/h) ° 2”: 30-170 GPM (6.8-38 m3/h) • Operating Pressure: 10-150 PSI (.7-10.5 BAR) • Temperature Range: Up to 170°F (76.7°C) • Body Styles: Globe Valve • 3/4”, 1”, 1 1/2” and 2” FNPT Inlet and Outlet

PERFORMANcE PREssuRE lOss (PsI) Flow Rate (GPM) 5 9 13 18 22 26

31

35

Size 3/4” Size 1”

• 7

• 8.5

3 3

3.5 4.2 6 3 4 4.5

Flow Rate

35

45

Size 1 1/2” Size 2”

2.8 3.2 4.2 5.0 6.6 8.5 • 2.7 3.1 4.3 5.3 6 8.5

65

7.2 8.5 5 5.5

90 120 132 154 160

PREssuRE lOss (bAR)

Flow Rate (m3/h)1 Size 3/4” Size 1”

2

3

4

5

6

7

Flow Rate

55

Size 1 1/2” Size 2”

0.20 0.22 0.30 0.35 0.46 0.60 • • 0.19 0.22 0.30 0.37 0.42 0.60 0.64

• 3/4”: 4.5” H x 4.25” L x 3.125” W (11.5 cm H x 11 cm L x 8 cm W)

• Not recommended

• 1 1/2”: 7.125” H x 6.125” L x 5.75” W (18 cm H x 16 cm L x 14.5 cm W)

Solenoid Features:

• 2”: 8.5” H x 6.125” L x 5.75” W (18 cm H x 16 cm L x 14.5 cm W)

10

15

20

27

30

35

• Replaceable plunger tip • Heavy duty construction

electrical speciFications:

• Rugged reinforced and supported self-cleaning diaphragm provides reliable operation even with dirty water

• Solenoid: 24 VAC (50-60 Cycles) • Current: .032A (7.7 VA) • Holding Current: 0.16A (3.84 VA) • Power Consumption: 1.7/2.2 watts • Solenoid Thread: 3⁄4”-20 UNES-2A

• Flow control handle for water flow adjustment and manual shutoff • Manual internal bleed override for opening valve in case of power failure without external water spill • High performance solenoid with low electrical power consumption

ORDERING INFORMATION

www.digcorp.com

ORDERING INFORMATION Model 33-016 33-017

Description 1 1/2” w/ solenoid and flow control 2” w/ solenoid and flow control

36

• Low sensitivity to dirt and voltage fluctuations • Silicone O-ring

• Smooth valve opening and closing prevents pressure surge hazards

Description 3/4” w/ solenoid, no flow control 1” w/ solenoid, no flow control 3/4” w/ solenoid and flow control 1” w/ solenoid and flow control

8

0.21 0.25 0.30 0.42 0.51 0.60 • • 0.20 0.23 0.28 0.33 0.35 0.39 0.51 0.60

Valve Dimensions:

• Easy in-line maintenance

Model 33-001 33-002 33-014 33-015

• 9.1

ORDERING INFORMATION Model 33-005

Description 3⁄4”-20 24 vac thread solenoid

28


Battery operated controllers and ValVes model 9001dc Battery powered hose end irriGation timer with lcd display DIG’s 3/4” hose end timer has a wide range of features offering a reliable, cost effective solution for residential uses.

Features: • 3/4” FHT inlet and MHT outlet • 6 buttons with large integrated liquid crystal display • Easy to read AM/PM clock and program • Watering durations from 1 minute to 11 hours and 59 minutes, in 1 minute increments • 7 day calendar schedule • Once per day up to 30 days in weekly or cyclical mode • Four start times per day • Emergency backup program of 5 minutes every 24 hours if no buttons are pressed after battery installation

speciFications:

• Flow Rate: Up to 5.2 GPM at 30 PSI (19.7 l/h at 2 BAR) • Temperature Range: 38-130°F (3.33-54.45°C) • Operating Pressure: 10-140 PSI (.7-9.8 BAR) • Solenoid Mechanism: Durable Electric Motor • Power Source: 9-Volt DC (1, 9-Volt Alkaline Battery) Not Included ° Battery Life: Up to 1 year

Materials: • Body: ABS • Inner Parts: Acetal

• Weather resistant • Manual irrigation cycle via the controller

Dimensions:

• Powered by one 9-volt alkaline battery

• 6” W x 4” D x 6.5” H (15.24 cm D x 16.5 cm H)

• Irrigation suspension override (rain mode) • Low battery indicator • Battery life up to 1 year • Use for drip or sprinkler systems • 3 year limited warranty

model 9001eZ-c Battery powered hose end irriGation timer DIG’s 3/4” hose end timer has a wide range of features and offers a reliable, cost effective solution for residential uses.

Features: • 3/4” FHT inlet and MHT outlet • 2 selectors and 1 button for easy programming • Powered by one 9-volt alkaline battery • Watering durations from once every 3 hours to once every 14 days • Ten preset durations from 2 minutes to 9 hours ° Duration can be changed after programming by setting the selector to a different setting • Up to eight start times per day • Program start time may be delayed in advance by any number of hours • Weather resistant • Automatic and manual operation via the controller using the start button • Battery life up to 1 year • Use for drip or sprinkler systems • 3 year limited warranty

ORDERING INFORMATION Model 9001DC

Description Hose thread timer

speciFications:

• Flow Rate: Up to 5.2 GPM at 30 PSI (19.7 l/h at 2 BAR) • Temperature Range: 38-130°F (3.33-54.45°C) • Operating Pressure: 10-140 PSI (.7-9.8 BAR) • Solenoid Mechanism: Durable Electric Motor • Power Source: 9-Volt DC (1, 9-Volt Alkaline Battery) Not Included ° Battery Life: Up to 1 year

Materials: • Body: ABS • Inner Parts: Acetal

Dimensions: • 6” W x 4” D x 6 1/2” H (15.24 cm D x 16.5 cm H)

ORDERING INFORMATION Model 9001EZC

29

Description Hose thread timer

1.800.322.9146


Battery operated controllers and ValVes 2-wire sinGle and Four station Battery operated controllers

speciFications

• Temperature Range: 38-130°F (3-54°C) • Power Source: 9-Volt DC (1, 9-Volt Alkaline Battery) Not Included • Battery Life: Up to 1 Year

With contemporary design for residential and light commercial use, the 700 series battery operated controllers offer a wide range of features that include advanced, 2-wire solenoid, smaller size profile, one 9-volt battery and a host of programming features that are easy to use.

electrical speciFications:

• Two-way Magnetic Latching, Normally Closed, Bi-Directional Pulse • Coil Operating Data: Coil Resistance 5 +/- 0.03 W, Minimum Pulse 10 mS Duration at 6-9 Volts ° Red + and White – To Latch Open ° Red – and White + To Latch Closed

Controller Features: • Operates up to four stations and master valve (four station) • 4 button keypad with an integrated large liquid crystal display (LCD)

Programming Features:

Materials:

• Watering durations in 1 minute increments from 1 minute to 12 hours

• Controller: ABS

• Four start times per day

• Valve Body and Cover: Glass Reinforced Nylon

• Easy to read AM/PM clock

• 7 day programming schedule or 1-30 day intervals

• Diaphragm: Nylon Fabric Reinforced Polyisoprene (NR)

• Can operate two valves simultaneously (four station)

• Water budget from 5-95% in 5% increments

• Metal Parts and Screws: Stainless Steel 304

• Operates drip or sprinkler systems

• Digital icon indicates station in operation (four station) • Automatic, semi-automatic and manual operation

• Rain delay up to 30 days • Waiting mode for the third valve in operation (four station) • Digital display blinking low battery indicator

• Programming shut-off override • Independent programming for each valve (four station) • Irrigation suspension override (rain mode) • Rain sensor connections • Master valve wires included with the four station model • Color coded wires for easy verification • Withstands harsh climatic conditions (completely sealed and waterproof) • Can be mounted directly on most brand name valves or to the wall inside an irrigation box using one of six available adapters • Powered by one 9-volt alkaline battery featuring low power consumption • Program stored for up to 20 seconds during battery change • Compatible with a two-wire S-305 latching solenoid • Single station includes the solenoid • 3 year warranty ORDERING INFORMATION Model 710-000

www.digcorp.com

Description Single station controller with solenoid

ORDERING INFORMATION Model 740-000

Description 4-station controller with solenoid

30


Battery operated controllers and ValVes PERFORMANcE PREssuRE lOss (PsI)

2-wire sinGle station Battery operated controller with in-line ValVe and actuator Used for a wide range of applications the 710-xxx series battery operated controller offers a flexible and simple solution for drip or sprinkler systems, areas without power and as a costeffective repair for existing systems. The controller includes a 3/4” to 2” in-line valve or actuator to fit a 3/4” or 1” manual anti-siphon valve. Controllers Features: • Stand alone unit includes in-line valve or actuator • Four button keypad with integrated large liquid crystal display (LCD) • Operates drip or sprinkler system • Easy to read AM/PM clock

Flow Rate (GPM) 5 Size 3/4” Size 1”

Size 1 1/2” 2.5 2.8 3.2 3.2 4.2 5.0 6.6 8.5 • Size 2” 2.7 2.8 3.1 4.3 5.3 6 8.5 9.1

PREssuRE lOss (bAR) Flow Rate (m3/h) 1

2

3

4

5

6

7

8

Size 3/4” .21 .25 .30 .42 .51 .60 • • Size 1” .20 .23 .28 .33 .35 .39 .51 .60

Programming Features: • Watering durations in 1 minute increments from 1 minute to 12 hours • Four start times per day • 7 day programming schedule or 1-30 day intervals • Water budget from 5-95% in 5% increments • Rain delay up to 30 days • Digital display blinking low battery indicator

Valve Features:

• Programming shut-off override

• Normally closed

• Internal manual bleed for manual on

• Slow opening and closing

• Irrigation suspension override (rain mode)

• One piece diaphragm with reinforced plastic housing for reliable, leak free valve closing

• Withstands harsh climatic conditions (completely sealed and waterproof)

• 8.5

Flow Rate (GPM) 20 35 45 55 65 90 120 132 154 160

• Automatic, semi-automatic and manual operation

• Rain sensor connections

9 13 18 22 26 31 35

3 3.5 4.2 6 7.2 8.5 • 3 3 4 4.5 5 5.5 7

Flow Rate (m3/h) 5

8 10 13 15 20 27 30

35

36

Size 1 1/2” .19 .20 .22 .23 .30 .35 .46 .60 • • Size 2” .18 .19 .20 .22 .30 .37 .42 .60 .64

• Not recommended

Dimensions: • Controller only: 4.214” H x 5” L x 3.6” W • Controller plus 3/4” and 1” valves: 8” H x 5” L x 3.6” W (20 cm H x 12.7 cm L x 15 cm W) • Controller plus 1 1/2” and 2” valves: 10.5” H x 8.5” L x 5” W (27 cm H x 22 cm L x 12.7 cm W)

• Easy in-line maintenance • High flow with low pressure loss

• Available valves from 3/4” to 2”

• Non corrosive materials

• Powered by one 9-volt alkaline battery featuring low power consumption

• Max inlet pressure 710.011 - 80 PSI

• Program stored for up to 20 seconds during battery change • Latching solenoid with encapsulated plunger and spring for reliable operation • 3 year warranty

speciFications:

• Flow Rates: ° 3/4”: .1-28 GPM (.23-6.4 m3/h) ° 1”: 2-35 GPM (.45-8 m3/h) • Operating Pressure: 10-150 PSI (.7-10.5 BAR) • Temperature Range: Up to 170°F (76.7°C) • Body Style: Globe • 3/4” and 1” FNPT Inlet and Outlet

ORDERING INFORMATION

ORDERING INFORMATION Model 710-011

31

Description Single station controller with actuator

Model 710-000 710-075 710-100 710-150 710-200

Description Single station controller with solenoid Single station controller with 3/4” in-line valve Single station controller with 1” in-line valve Single station controller with 1 1/2” in-line valve Single station controller with 2” in-line valve

1.800.322.9146


uniVersal dc solenoid and ValVes speciFications:

uniVersal dc ValVes and actuators DIG 305DC series in-line valves and actuators are used with the LEIT-2 and the 700 series battery operated controllers. Designed to perform in a wide range of field conditions, the 305DC series provides a reliable solution in alternative power system. These valves feature heavy-duty construction with internal manual bleed, encapsulated solenoid plunger and a supportive diaphragm, ensuring dependable operation. Features: • Adaptable to many brand name valves using DIG valve adapters • Sealed plastic over molding technique for waterproof construction • Encapsulated plunger and spring for reliable operation • Internal bleed, manual override for manual ON/ OFF • Constructed of glass reinforced nylon with a stainless steel spring • High flow with low pressure loss

• Flow Rate: ° 3/4”: .1-28 GPM (.23-6.4 m3/h) ° 1”: .2-35 GPM (0.45-8 m3/h) ° 1 1/2”: 20-132 GPM (4.5-30 m3/h) ° 2”: 30-160 GPM (6.8-36 m3/h) • Operating Pressure: 10-150 PSI, (.7-10.5 BAR) • Max Inlet Pressure: 305DC - 013 - 80 PSI • Temperature Range: Up to 170°F (76.2°C) • Body Style: Globe • 3/4”, 1”, 1 1/2” and 2” FNPT Inlet and Outlet

electrical speciFications

• 3/4” and 1”: 4.5” H x 4.25” L x 3.12” W, (11.5 cm H x 11 cm L x 8 cm W) • 1 1/2”: 7.12” H x 6.12” L x 5.75” W, (18 cm H x 16 cm L x 14.5 cm W) • 2”: 8.5” H x 6.12” L x 5.75” W, (21 cm H x 16 cm L x 14.5 cm W)

Materials: • Valve Body and Cover: Glass Reinforced Nylon • Diaphragm: Nylon Fabric Reinforced Polyisoprene (NR) • Metal Parts and Screws: Stainless Steel 303

• Normally closed

• Solenoid Housing Over Mold: Nylon

• Easy in-line maintenance

• Solenoid Housing Base: Nylon

• Smooth valve opening and closing prevents pressure surge hazards

• Inside Housing Stainless Steel Part: 430F

• Rugged, reinforced self-cleaning diaphragm provides reliable operation even with contaminated water • Flow control handle for water flow adjustment and manual shutoff • Manual internal bleed override beneath the LEMA solenoid for opening the valve without external water spill

• Plunger Rubber Cap: EPDM • O-ring: Buna-N • Plunger Cup: EPDM

Flow Rate

5

PERFORMANcE FlOw RATE (GPM) 9 13 18 22 26

Size 3/4” 3 3.5 4.2 Size 1” 3 3 4 Flow Rate 35 45 65 Size 1 1/2” 2.8 3.2 4.2 Size 2” 2.7 3.1

MAXIMUM WIRE RUNS PSI 170 160 150

6 4.5 90 5.0 4.3

7.2 5 120 6.6 5.3

31

35

8.5 • • 5.5 7 8.5 132 154 160 8.5 • • 6 8.5 9.1

Pressure Loss (PSI)

140 130

Flow Rate

120 14 AWG

110

12 AWG

100 90 80 70 60 0

Dimensions:

• Two-way Magnetic Latching, Normally Closed, Bi-Directional Pulse • Coil Operating Data: ° Coil Resistance 5 +/- 0.03 W, Minimum Pulse 10 mS Duration at 6-9 Volts ° Red + and White – To Latch Open ° Red – and White + To Latch Closed

0

2000 2500

3000

200 5000 5500 6000 3500 4000 4500

FEET

www.digcorp.com

6500

7000

300 7500

Size 3/4” Size 1” Flow Rate Size 1 1/2” Size 2”

1 0.21 0.20 55 0.20

FlOw RATE M3/h 2 3 4 5 0.25 0.23 10 0.22 0.19

Pressure Loss (bar) • Not recommended

0.30 0.28 15 0.30 0.22

0.42 0.33 20 0.35 0.30

0.51 0.35 27 0.46 0.37

6

7

8

0.60 • • 0.39 0.51 0.60 30 35 36 0.60 • • 0.42 0.60 0.64

ORDERING INFORMATION Model Description 305DC-070 DC solenoid on 3/4” in-line valve 305DC-075 DC solenoid on 3/4” in-line valve 305DC-100 DC solenoid on 1” in-line valve 305DC-105 DC solenoid on 1” in-line valve 305DC-150 DC solenoid on 1 1/2” in-line valve 305DC-200 DC solenoid on 2” in-line valve 305DC-013 DC solenoiD with 3/4” and 1” actuator

32


uniVersal dc solenoid and ValVes s-305dc solenoid DIG’s Unimax solenoid is a twoway magnetic latching solenoid designed for use with the LEIT-2 and 710 battery operated controllers on various brand name valves using DIG’s assortment of threaded adapters. The S-305 can also operate with various 2-wire DC controllers available on the market to a distance of up to 200 ft using 14 AWG wire. The S-305 uses a sealed plastic over-molding to prevent water or contaminants from entering the solenoid housing. The normal actuation of the S-305 is via a bi-directional pulse. Features: • Adaptable to a wide range of valves using our valve adapters • Sealed plastic over molding technique for waterproof construction • Encapsulated plunger and spring for reliable operation • Internal bleed and manual override for manual ON/OFF

speciFications

• Weight Without Adapter and Handle: 4.0 oz (113 g) • Total Weight: 4.23 Oz (120 g) • Solenoid Thread: 11/16”-12 UN • Operating Pressure: 10-150 PSI (.7-10.5 BAR) • Control Orifice: 0.62” +/- 0.001 (1.6 mm) • Temperature Range: 32-170°F (0-77°C)

MAXIMUM WIRE RUNS

ValVe adapters

PSI 170

Features:

160 150 140

• Available to fit on a wide range of plastic or brass valves

130 120 14 AWG

110

12 AWG

• Made of durable plastic

100 90

Materials:

80 70

• Adapter: Nylon

60 0

0

2000 2500

3000

200 5000 5500 6000 3500 4000 4500

6500

7000

300 7500

FEET

Materials:

• O-ring: Buna N • Sleeve: Poly

• Solenoid Housing Over Mold: Nylon • Solenoid Housing Base: Nylon • Inside Housing Stainless Steel Part: 430F • Plunger Rubber Cap: EPDM • O-ring: Buna-N

Dimensions: • Diameter: 1.206” (max) (3.6 cm) • Overall length: 2.330” (6 cm) without adapter, 2.735 (7 cm) with adapter

electrical speciFications

• Two-way Magnetic Latching, Normally Closed, Bi-Directional Pulse • Coil Operating Data: ° Coil Resistance 5 +/- 0.03 W, Minimum Pulse 10 mS Duration at 6-9 Volts ° Red + and White – To Latch Open ° Red – and White + To Latch Closed • Leads: 18” (45 cm) Red/White.

ORDERING INFORMATION Model 30-920

ORDERING INFORMATION Model S-305DC

33

Description DC Solenoid with internal bleed and manual override 6-9 volt DC

Description Solenoid plastic adapter for BERMAD 200 series, HIT 500 series, DOROT series 80 30-921 Solenoid plastic adapter for RAIN BIRD DV, DVF, PGA, PEB, GB, EFB-CP, BPE, PESB, ASVF 30-922 Solenoid plastic adapter for HUNTER ASV, HPV, ICV, PGV, SRV, IBV, ASVF 30-923 Solenoid plastic adapter for WEATHERMATIC 12000, 21000 series 30-924 Solenoid plastic adapter for IRRITROL 100, 200B, 205, 217B, 700 series, 2400, 2500, 2600 series, TORO 220, P220 series, GRISWOLD 2000, DW 30-925 Solenoid plastic adapter for SUPERIOR 950, HUNTER HBV, TORO 252 (1.5” and larger), BUCKNER VB series

1.800.322.9146


Battery operated controllers and ValVes sinGle station with actuator For 3⁄4” and 1” anti-siphon ValVe and 3/4” to 2” inline ValVe The 510 series battery operated controllers convert 3/4” and 1” brass or plastic manual anti-siphon valves to automatic operation. Also available with a 3/4” to 2” in-line, normally closed valves and flow control. The 510 series is completely waterproof and is intended for outdoor installation. Features: • Watering durations in 1 minute increments from 1 minute to 12 hours • Four start times per day • 7 day programming schedule or 1-30 day intervals • Water budget from 5-95% in 5% increments • Automatic, semi-automatic and manual operation • Manual shut-off ° Flow control can adjust to off ° Internal manual bleed • Rain delay up to 30 days • Irrigation suspension override (rain mode) • Withstands harsh climatic conditions ° Completely waterproof • Four button keypad with an integrated liquid crystal display (LCD) • Easy to read AM/PM clock • Powered by two 9-volt alkaline batteries ° Digital display blinking low battery indicator ° Program saves up to 20 seconds during battery change • Slow opening/slow closing for smooth operation • 24” solenoid wire with waterproof connection to the controller • Contains all adapters required for conversion of most 3/4” and 1” brass or plastic manual antisiphon valves

speciFications:

• Flow Rates: ° 3/4”: .1-28 GPM (.23-6.4 m3/h) ° 1”: 2-35 GPM (.45-8 m3/h) ° 1 1/2”: 20-132 GPM (4.5-30 m3/h) ° 2”: 30-160 GPM (6.8-36 m3/h) • Operating Pressure: 10-150 PSI (.7-10.5 BAR) • Temperature Range: Up to 170°F (82°C) • Body Style: Globe • 3/4”-2” FNPT Inlet and Outlet

Materials: • Controller Body and Cover: ABS • Controller Inner Parts: Acetal • Actuator Body: Glass Reinforced Nylon • Diaphragm and Rubber Seal: EPDM • Metal Parts and Screws: Stainless Steel 304 • Solenoid Inner Metal Parts: Stainless Steel 304 • Valve Body and Cover: Glass Reinforced Nylon • Diaphragm: Nylon Fabric Reinforced Polyisoprene (NR)

Dimensions: • Controller plus 3/4” and 1” valves: 8” H x 7.5” L x 3.875” W (20 cm H x 19 cm L x 9.6 cm W) • Controller plus 1 1/2” and 2” valves: 9.5” H x 10” L x 3.875” W (24 cm H x 25 cm L x 9.6 cm W)

electrical speciFications:

• Dry Latching Solenoid with Manual Override • Temperature Range: 38-130°F (3-54°C). • Power Source: 18 Volt DC (2, 9-Volt Alkaline Batteries) Not Included ° Power Draw: .2 Amps Per Cycle ° Battery Life: Up to 2 years

www.digcorp.com

PERFORMANcE PREssuRE lOss (PsI) Flow Rate (GPM) 5 Size 3/4” Size 1”

9 13 18 22 26 31 35

3 3.5 4.2 6 7.2 8.5 • 3 3 4 4.5 5 5.5 7

• 8.5

Flow Rate (GPM) 20 35 45 55 65 90 120 132 154 160 Size 1 1/2” 2.5 2.8 3.2 3.2 4.2 5.0 6.6 8.5 • Size 2” 2.7 2.8 3.1 4.3 5.3 6 8.5 9.1

PREssuRE lOss (bAR) Flow Rate (m3/h) 1

2

3

4

5

6

7

8

Size 3/4” .21 .25 .30 .42 .51 .60 • • Size 1” .20 .23 .28 .33 .35 .39 .51 .60

Flow Rate (m3/h) 5

8 10 13 15 20 27 30

35

Description Controller with 3/4” in-line valve Same as 510.075 with sensor connector Controller with 1” in-line valve Same as 510.100 with sensor connector Controller with 1 1/2” in-line valve Controller with 2” in-line valve

36

Size 1 1/2” .19 .20 .22 .23 .30 .35 .46 .60 • • Size 2” .18 .19 .20 .22 .30 .37 .42 .60 .64

• Not recommended

ORDERING INFORMATION Model 510.075 510.075S 510.100 510.100S 510.150 510.200

ORDERING INFORMATION Model 510.011

Description Controller with actuator

34


Battery operated controllers and ValVes sinGle station propaGation and irriGation controller with 3 ⁄4”-20 solenoid or with in-line ValVe Features: • Watering durations from 1 second up to 12 hours in 1 second increments (510.xxxP) • Watering windows can be programmed to last from 1 minute to 24 hours (510.000P) • Manual irrigation via the controller for semiautomatic operation and system testing • Manual shut off ° Internal manual bleed • Rain delay up to 30 days • Irrigation suspension override (rain mode) • Withstands harsh climatic conditions ° Completely waterproof • Powered by two 9-volt alkaline batteries ° Digital display, blinking low battery indicator

Watering schedules can be set according to four different programs: 1) Standard watering cycle: Seven day calendar with four start times per day (510.000 and 510.xxxP) 2) Cyclical watering cycle: From every day up to once every 30 days (510.000 and 510.xxxP) 3) Repeat watering cycle: From 1 hour to 23 hours (510.000 and 510.xxxP) 4) Repeat watering cycle in one minute intervals with window to start at am or pm, and window to close at am or pm (510.xxxP)

electrical speciFications:

ORDERING INFORMATION Model Description 510.075P Propagation controller on 3/4” valve 510.100P Propagation controller on 1” valve

• Dry Latching Solenoid • Solenoid Adaptor Thread: 3⁄4”-20 UNES-2A • Temperature Range: 38-130°F (3-54°C). • Power Source: 18 Volt DC (2, 9-Volt Alkaline Batteries) Not Included ° Power Draw: .2 Amps Per Cycle ° Battery Life: Up to 1 Year

° Program stored up to 20 seconds during battery change • Comes with a 3/4”-20 solenoid or mounted on a 3/4” or 1” valve • Can be used for irrigation (510.000) or propagation (510.xxxP) • Propagation controllers (510.xxxP) can be used for misting and humidity control

conVersion adapters Conversion and extension adapters for use in conjunction with battery operated controllers. • P00-997 adapts to RAIN BIRD series GB, PEB, ASVF and EFB valves

ORDERING INFORMATION Model Description 510.000 with 3⁄4”-20 solenoid 510.000S with 3⁄4”-20 solenoid and rain sensor connector

35

ORDERING INFORMATION Model Description 510.000P Propagation controller 3/4”-20 solenoid

ORDERING INFORMATION Model P00-997

Description Adapts to GB, EF, PEB,ASVF and EFB

1.800.322.9146


Battery operated controllers and ValVes Four and six station Battery operated controllers Designed for multi-valve installations, series 540 and 560 battery operated controllers can power four to six valves utilizing 337.xxx DC solenoid vales and actuators. Independent programming for each valve offers maximum flexibility for a full range of watering requirements. Controller Features: • Operates up to six valves plus master valve (four and six station) • Four button keypad with an integrated large liquid crystal display (LCD) • Operates drip or sprinkler systems • Easy to read AM/PM clock • Can operate two valves simultaneously (four and six station) • Digital icon indicates station in operation (four and six station) • Automatic, semi-automatic and manual operation • Independent programming for each valve (four and six station) • Rain sensor connections included with model 510.000S and 540.000WS • Withstands harsh climatic conditions (completely sealed and waterproof) • Powered by two 9-volt alkaline batteries

dc solenoid and in-line ValVe actuators Designed to operate with four and six station battery operated controllers, series 337.xxx solenoid, actuator and in-line valves are designed for both commercial and residential use. With high flow and low friction loss, they are made of very durable plastic for reliable performance and long life. Features: • Constructed of glass reinforced nylon with a stainless steel spring • High flow with low pressure loss • Normally closed • Easy in-line maintenance • Smooth valve opening and closing prevents pressure surge hazards • Rugged, reinforced self-cleaning diaphragm provides reliable operation even with dirty water • Flow control handle for water flow adjustment and manual shutoff • Manual internal bleed override for opening valve without external water spill

speciFications:

• Flow Rates: ° 3/4”: .1-28 GPM (.23-6.4 m3/h) ° 1”: 2-35 GPM (.45-8 m3/h) ° 1 1/2”: 20-132 GPM (4.5-30 m3/h) ° 2”: 30-160 GPM (6.8-36 m3/h) • Operating Pressure: 10-150 PSI (.7-10.5 BAR) • Dry Latching Solenoid • Temperature Range: Up to 170°F (76.7°C) • Body Style: Globe • Source: 18-Volt DC • 3/4”, 1”, 1 1/2” and 2” FNPT Inlet and Outlet • Solenoid Thread: 3/4”-20 UNES-2A

ORDERING INFORMATION Model 540.000W 560.000W 540.000WS 560.000WS

Description 4 station controller 6 station controller 4 station with rain sensor connection 6 station with rain sensor connection

www.digcorp.com

Valve Dimensions: • 3/4” and 1”: 4.5” H x 4.25” L x 3.125” W (11.5 cm H x 11 cm L x 8 cm W) • 1 1/2”: 7.125” H x 6.125” L x 5.75” W (18 cm H x 16 cm L x 14.5 cm W) • 2”: 8.5” H x 6.125” L x 5.75” W (18 cm H x 16 cm L x 14.5 cm W) PERFORMANcE PREssuRE lOss (PsI) Flow Rate (GPM)5 9 13 18 22 26

31

35

Size 3/4” Size 1”

• 7

• 8.5

3 3

3.5 4.2 6 3 4 4.5

Flow Rate

35

45

Size 1 1/2” Size 2”

2.8 3.2 4.2 5.0 6.6 8.5 • 2.7 3.1 4.3 5.3 6 8.5

65

7.2 8.5 5 5.5

90 120 132 154 160

PREssuRE lOss (bAR)

Flow Rate (m3/h)1 Size 3/4” Size 1”

2

3

4

5

6

7

Description 3/4” valve with flow control 1” valve with flow control 1 1/2” valve with flow control 2” valve with flow control

8

0.21 0.25 0.30 0.42 0.51 0.60 • • 0.20 0.23 0.28 0.33 0.35 0.39 0.51 0.60

Flow Rate

55

Size 1 1/2” Size 2”

0.20 0.22 0.30 0.35 0.46 0.60 • • 0.19 0.22 0.30 0.37 0.42 0.60 0.64

10

15

20

27

30

35

36

• Not recommended

dc solenoid and actuator Two-way DC solenoid with 24” threewire cable and 3⁄4”-20 thread and actuator Features: • Three color-coded 24” wires for easy reference • Manual override • Built in flow control • Contains all parts required for conversion on most 3/4” and 1” brass or plastic manual anti-siphon valves • Slow opening/slow closing for smooth operation

ORDERING INFORMATION Model 337.075 337.100 337.150 337.200

• 9.1

ORDERING INFORMATION Model 337.000 336.013

Description 3⁄4”-20 thread DC solenoid 3/4 or 1” DC actuator

36


leit controllers and accessories leit-2 system For residential and commercial applications. The LEIT-2 system combines the LEIT-2 wireless irrigation controller powered by ambient light with the LEIT RC2 remote control handset. The LEIT-2 can operate up to two valves and a rain sensor using a highly efficient photovoltaic module fueled by ambient light. After installation, no further visits to the controller are required under normal conditions.

Controller Features:

Dimensions:

• Operates up to two stations with a sensor without AC power hookup, batteries, or conventional solar panels

3” W x 5 1/2” L including the antenna

• The LEIT-2 controller uses up to two Unimax S-305DC solenoids mounted on most brand name valves using one of six valve adapters

Controller Accessories: The LEIT-2 has three mounting configurations to fit any application

• Client ID enables the user to have a unique identity code for his controllers and handset security feature which locks out unauthorized users

• Valve box mounting with three different colors: green, tan and purple

• Non-volatile memory retains program and controller integrity forever (excluding time)

• Column mounting allows the controller to be above the ground using 25” or 50” galvanized mounting column

• Functions day and night in any weather and most outdoor locations • All power is provided by an internal, highly efficient photovoltaic module and microelectronic energy management system fueled by ambient light • No direct sunlight required

• Valve clip mounting can attach the controller into the top of the S305DC solenoid

speciFications:

• Controller Input: 0-100,000+ Lux. Normal Operation Requires Average of 3000 Lux • Controller Output: 9-Volt Pulse

• Electrical protection for up to 50 volts; resistant to damage from lightning and currents from power lines • The controller sends a stored alert to the handset if a charging problem occurs, which then can be reviewed by the user • Environmentally friendly; certified lead free; uses light as a source of energy • The controller operates in conjunction with the RC2 two-way radio handset • Radio frequency is in the ISM band 920 MHz (868 international). CE and FCC certified • Controller defaults to a program of 5 minutes per day with a start time of 9 am if not programmed • Program stacking feature prevents hydraulic overload • Available with 18” color-coded 18 gauge wires for each valve • Dedicated 18” color-coded rain sensor connection promotes better water efficiency • Built from tough, rugged material - resistant to harsh environmental conditions; complies with IP68 requirements

ORDERING INFORMATION Model 30-831 30-830

ORDERING INFORMATION Model LEIT-2

37

Description 2 station controller only

Description LEIT-2 controller plastic column attachment LEIT-2 controller valve box dome attachment with 8 screws, green 30-832 LEIT-2 controller valve clip attachment 30-835 LEIT-2 controller valve box dome attachment with 8 screws, tan 30-836 LEIT-2 controller valve box dome attachment with 8 screws, purple MCOL2S LEIT-2 controller 25” (63cm) mounting column MCOL2L LEIT-2 controller 50” (128cm) mounting column

1.800.322.9146


leit controllers and accessories leit rc2 remote control handset The LEIT RC2 remote control handset communicates with up to 99 LEIT-2 controllers, or 198 valves, from a distance of 350 feet (100 m) line of sight. The RC2 remote has a large LCD display with sophisticated and intuitive icon-based software used to communicate with LEIT-2 controllers. All of the controller’s operations are controlled via the RC2 remote handset.

Programming Features: • Watering durations from 1 minute and up to 5:59 hours in 1 minute increments • Two programs with four start times per program • Custom programming with 7 day calendar or intervals of 1-30 days in odd/even or every day rotation • 365 day calendar with leap year • Reconnect via the Find screen with up to the last ten saved addresses • Status Report provides various function information on the controller and controller programming • History Report for each valve provides operating time for past and current month

Handset Features:

• Rain delay up to 99 days with auto-restart

• The LEIT RC2 has an operating range of up to 350 ft (100 meters), line of sight.

• Monthly Off feature allows any month of the year to be inactive

• Radio frequency is in the ISM band 920 MHz (868 international). CE and FCC certified

• Permanent Events Off feature allows any three days of the year to be inactive and will override any programs that enter that time frame

• LEIT RC2 handset can perform many functions, such as review status, check history reports, adjust budgeting, program rain delays and perform manual runs • Large liquid crystal display with user friendly icons for easy programming • Multilingual software in English, Spanish, Italian, French, German and Portuguese • When programs are changed the user can review the changes identifying the handset that made the changes

• Individual monthly water budgeting from 10- 200% in 10% increments • Manual test of individual valves and manual program • Global Stop command will turn off all valves within radio range

electrical speciFications:

• Handset Input: 12-Volt DC • Handset Power: 3.6V Ni/MH Rechargeable Cells Battery Pack • Wall Charger: 120VAC/60 h2, 12-Volt DC @ 250 mA

Dimensions: 2 1/4” W x 5 1/2” L including the antenna

• Provides controller status on connection • Client ID enables the user to have a unique identity code for his or her handset and controllers, a security feature which locks out unauthorized users • Diagnostic setting alerts the user when there is a problem such as a short or open valve • Lets the user know the controller’s power level and alerts the user if it is not fully charged after one day. • Environmentally friendly; certified lead free

ORDERING INFORMATION Model 30-850 30-851 30-852

www.digcorp.com

Description LEIT, Radio RC2 handset power supply 120 VAC/60 h2, 12 VDC @ 150 mA LEIT, Radio RC2 handset car charger, 4 ft. cable LEIT, Radio RC2 handset holder

ORDERING INFORMATION Model LEIT RC2

Description Handset

38


leit controllers and accessories leit 4000 Four, six and eiGht station standard series The LEIT® 4000 is an advanced ambient light powered, watermanagement irrigation controller. It is easy to use with a fast menu base and straightforward programming. Features include independent programs for each valve, monthly budgeting, rain delays and status reports for past and current months. The time-tested photovoltaic module harnesses the energy of ambient light to power the controller in any kind of weather, anywhere in the world. Features: • Operates four, six, or eight stations and a master valve or pump start without AC power hookup, batteries or conventional solar panels (master valve or pump start replaces station 8 when required) • Non-volatile memory holds programs indefinitely without batteries • Liquid crystal display is easy to read under almost any daylight conditions • Programming is easy using a self-guiding menu and four durable sealed buttons • Bilingual software (English and Spanish) • Functions day or night in any weather and most outdoor locations ° All power is provided by an internal, ultrahigh efficiency photovoltaic module and microelectronic energy management system fueled by ambient light ° No direct sunlight required • Controller functions and operations are 100% tested • Controller waterproofing is 100% tested • Lightning protection; the controller is fully isolated from electrical ground, offering virtual immunity to ground currents from overhead power-lines and/or close proximity lightning strikes

Programming Features: • Watering durations from 1 minute to 5 hours and 59 minutes • Four programs with three start times per program allow for mixed irrigation applications • Custom programming with 7-day calendar or intervals of 1-39 days in odd/even or every day rotation • Operates drip or sprinkler systems • Status Report for each valve verifies operating time for past and current month • Rain delay up to 99 days with auto-restart • Individual monthly water budgeting from 10-200% in 10% increments

electrical speciFications:

• Controller Input: 0-100,000+ Lux. Normal Operation Requires Average of 3,000 Lux • Controller Output: 5-Volt Pulse • Remote Handset Input: 12-Volts Using 3.6-Volt Nim/MH

speciFications:

• Unit Mounts Securely to a Rugged Galvanized Steel Mounting Column Using Stainless Steel Lock Bolts • Vandal Resistant, Waterproof Enclosure Fashioned From Super Tough Material Endures Extreme Hot, Cold, Wet or Dry Weather • Super-Tough Lexan© Lens Protects The Photovoltaic Module From Moisture, Dust, Chemicals a nd Impact Damage • Weight: 2.6 lbs (1.2 kg) • Operational Temperature: 14-140°F (–10-60°C) • Temperature Range: –40-200°F (–38-93°C)

Security: • Programming password eliminates potential user error • Password can be changed at any time during program setup activation • Standard stainless steel lock secures weather resistant exterior panel

Dimensions: • 9.4” H x 5.7” W x 3.2” D (23.9 cm H x 14.5 cm W x 8 cm D)

• Simple to install, easy-access wire connector accommodates standard irrigation wire up to 12 gauge • Environmentally friendly; uses clean power • Manual watering by station or program • Assign rain, moisture or freeze sensors to an individual valve or to the entire system using SKIT 8821-4 connector

39

ORDERING INFORMATION Model 4004 4006 4008

Description 4 station plus MV/P 6 station plus MV/P 8 station includes MV/P

1.800.322.9146


leit controllers and accessories leit x, ten throuGh twenty-eiGht stations LEIT is an ambient light powered water-management irrigation controller. The LEIT X has a new improved menu base that allows for a wide range of irrigation programs, such as valve grouping, independent programs and more. The photovoltaic module harnesses the energy of ambient light to power the unit both day and night. Designed for sprinkler or drip systems, the LEIT X is a commercial water management controller for any type of environment and for a wide range of applications. Features: • Environmentally friendly – uses clean power • Operates 10, 12, 16, 20, 24 and 28 stations plus a master valve or pump start without AC power hookup, batteries or conventional solar panels ° Terminal strip can handle 28 hot wire stations, two MV/P wires and two common wires • Non-volatile memory holds programs indefinitely without batteries • Liquid crystal display is easy to read under almost any daylight conditions • Programming is easy, using a self-guiding menu and four durable sealed buttons • Bilingual software in English and Spanish • Functions day or night in most weather conditions and outdoor locations ° All power is provided by an internal, ultrahigh efficiency photovoltaic module and microelectronic energy management system fueled by ambient light

• Assign rain, moisture or freeze sensors to an individual valve or to the entire system using the SKIT 8821-4 adapter • Can replace any LEIT 8000 or Solatrol controller with 1500S or 1500E actuator • Compatible with most brands, styles and sizes of valves (refer to LEMA 1500S series actuator specification sheet)

Programming Features: • Watering durations from 1 minute to 5 hours and 59 minutes available • Four programs with three start times per program allowing for mixed irrigation applications • Custom programming with 7-day calendar or intervals of 1-39 days in odd/even or every day rotation • Operates drip or sprinkler systems • Status Report provides information on active programs or valves, month deactivations, rain stop, remote or local mode, and station short circuit if used with LEMA 1600HE only • History Report allows the user to review the controller operating history for a total watering time of each valve with overall total and manual run times. This information is available for the current month and the previous 11 months. The user can also review the current year versus previous year. • Monthly Off option allows shut-off of irrigation for any month of the year. All the months are active by default. • Internal electrical diagnostics can detect open wires or short circuits. Selectable by user (deactivated by default).

electrical speciFications:

• Controller Input: 0-100,000+ Lux. Normal Operation Requires Average of 8,000 Lux • Controller Output: 5-Volt Alternating Pulse

speciFications:

• Unit Mounts Securely to a Rugged Galvanized Steel Mounting Column Using Stainless Steel Lock Bolts • Vandal Resistant, Waterproof Enclosure Fashioned From Super Tough Material Endures Extreme Hot, Cold, Wet or Dry Weather • Super-Tough Lexan© Lens Protects the Photovoltaic Module From Moisture, Dust, Chemicals and Impact Damage • Weight: 4.9 lbs (2.2 kg) • Operational Temperature: 14-140°F (–10-60°C)

Dimensions: • 12” H x 7.5” W x 4.5” D (30.4 cm H x 19 cm W x 11.4 cm D)

Security: • Programming password eliminates potential error by another user • Password can be changed at any time during program setup • Standard stainless steel lock secures weather resistant exterior panel

• Rain delay up to 99 days with auto-restart • Individual monthly water budgeting from 10-200% in 10% increments • Station custom grouping allows the controller to operate more than one group and any number of stations per group together (if hydraulic limitations are not exceeded).

° No direct sunlight is required • Controller functions and operations are 100% tested • Controller waterproofing is 100% tested • Lightning protection: the controller is fully isolated from electrical ground, offering virtual immunity to ground currents from overhead power lines and/or close proximity lightning strikes • Simple to install; easy access wire connector accommodates standard irrigation wire up to 12 guage • Manual watering or semi-automatic cycle by station with quick override

www.digcorp.com

ORDERING INFORMATION Model X10 X12 X16 X20 X24 X28

Description 10 station plus MV/P 12 station plus MV/P 16 station plus MV/P 20 station plus MV/P 24 station plus MV/P 28 station plus MV/P

40


leit controllers and accessories leit xrc controller The LEIT XRC controller can be used as an individual controller or as a key component of the LEIT Link® irrigation management system. The LEIT XRC series utilizes two-way radio communication to correspond with a LEIT Link remote control handset. The XRC incorporates all the features of the earlier models of LEIT and many new features, allowing the user a wide range of flexibility using two-way communication without the requirement for AC power. Features: • Operates drip or sprinkler systems • Remote programming and management capability from LEIT Link remote control handset ° Remote control protocol allows LEIT XRC to communicate with more than one LEIT Link remote control handset ° LEIT XRC radio frequency module operates in the ISM band 900-928 MHz (US and Australia) (866 MHz Europe) • Operates 4, 6, 8, 10, 12, 16, 20, 24 and 28 stations plus a master valve or pump start, without AC power hookup, batteries or conventional solar panels ° Terminal strip can handle 28 hot wire stations, two MV/P wires and two common wires • Non-volatile memory holds programs indefinitely without batteries • Liquid crystal display is easy to read under almost any daylight conditions • Programming is easy, using a self-guided menu and four durable, sealed buttons • Bilingual software (English and Spanish) • Functions day or night in any weather and most outdoor locations ° All power is provided by an internal, photovoltaic module and micro-electronic energy management system fueled by ambient light ° No direct sunlight required • Controller functions and operations are 100% tested • Controller waterproofing is 100% tested • Lightning protection: the controller is fully isolated from electrical ground, offering virtual immunity to ground currents from overhead power lines and/or close proximity lightning strikes

41

• Simple to install, easy access wire connector accommodates standard irrigation wire up to 12 gauge • Environmentally friendly; uses clean power • Assign rain, moisture or freeze sensors to an individual valve or to the entire system using the SKIT 8821-4 adapter

Programming Features: • Watering durations from 1 minute to 5 hours and 59 minutes • Four programs with three start times per program allow for mixed irrigation applications • Custom programming with 7-day calendar or intervals of 1-39 days in odd/even or every day rotation • Status Report provides information on active programs or valves, month deactivations, rain stop, remote or local mode, and station short circuit if used with LEMA 1600HE only • Rain delay up to 99 days with auto-restart • Individual monthly water budgeting from 10-200% in 10% increments • Custom grouping of stations allows the controller to operate more than one group and any number of stations per group together (if hydraulic limitations are not exceeded)

electrical speciFications:

• Controller Input: 0-100,000+ Lux. Normal Operation Requires Average of 8,000 Lux • Controller Output: 5-Volt Alternating Pulse

• Manual Run allows for repeat testing of individual valves, semi-automatic cycle by station with quick override via manual setup, skip to the next valve or run any of the programs • History Report allows the user to review the controller operating history for a total watering time of each valve with overall total and manual run times. This information is available for the current month and the previous 11 months. The user can also review the current year versus previous year. • Monthly Off option allows shut-off of irrigation for any month of the year. All the months are active by default. • Internal electrical diagnostics can detect open wires or short circuits. Selectable by user, (deactivated by default).

ORDERING INFORMATION Model XRC04 XRC06 XRC08 XRC10 XRC12 XRC16 XRC20 XRC24 XRC28

Description 4 station plus MV/P 6 station plus MV/P 8 station plus MV/P 10 station plus MV/P 12 station plus MV/P 16 station plus MV/P 20 station plus MV/P 24 station plus MV/P 28 station plus MV/P

1.800.322.9146


leit controllers and accessories leit link® two-way remote control handset The LEIT Link remote control handset is a user-friendly, hand-held, twoway radio communication device that offers all the programming capabilities and features of a LEIT controller in the palm of your hand. The LEIT handset can perform manual runs, test valves, change programs, adjust budgets, review controller status, and activate programs from up to 800 ft. line of sight. This facilitates a safer working environment, while simplifying maintenance duties and walkthroughs in high traffic areas and hard to reach sites.

Features: • The MULTI-PRO™ can communicate with up to 99 controllers • The MASTER™ can communicate with up to 99 groups of controllers, each group with up to 99 controllers • The handset’s wireless communication range is up to 800’ line of sight • Bilingual software (English and Spanish) • The remote control handset radio frequency module operates in the ISM band 900-928 MHz (US and Australia) (868/869 MHz Europe) • Remote control protocol allows two-way communication with secure identity code • Menu based programming and user friendly commands have the look, feel and functionality of programming the LEIT XRC

Programming Features: The Handset Read and Modify: • Rain Stop • Budget • PM/V Location

• Built from tough, rugged material, making it resistant to harsh environmental conditions

• Time / Date

• Rechargeable battery will last for up to four hours of continuous operation

• Sensor

• FCC approval (part 15 of FCC rules for spread spectrum, intentional radiators, and part 15 sub C specification)

• Month Stop

electrical speciFications:

• Handset Input: 12-Volts • Handset Power: 3.6-Volt Ni/MH Rechargeable Cells Battery Pack • Wall Charger: 120VAC/60 h2, 12-Volt DC @ 250 mA (included)

Dimensions: • 8.6” H x 4.0” L (21 cm H x 10.1 cm L) including the antenna

• Active Programs • Watering Schedule • Wire Integrity • LEIT Link handset can review status reports, modify settings and temporarily interrupt a running program to do a manual run, test a valve or skip to next valve mode. • The currently running program and current valve open information is provided on first contact. • In Status Report mode the handset can review time, date, revised budgets, sensor activation (if rain stop is active), and solenoid integrity for open or short circuit. • The History Report reviews hourly usage of each valve for a period of up to twelve months.

ORDERING INFORMATION Model Description LEIT Link MULTI-PRO™ Up to 99 controllers LEIT Link MASTER™ 99 controllers with 99 groups

www.digcorp.com

42


leit controllers and accessories lema 160he ValVes

speciFications:

The 160HE is a high performance, high flow in-line valve with a solenoid actuator that is used with the LEIT 4000, X and XRC controllers for all types of commercial applications. Features: • Adaptable to many brand name valves using DIG valve adapters • Waterproof construction: sealed plastic over molding • Encapsulated plunger and spring for reliable operation • Internal bleed, manual override for manual ON/ OFF • Constructed of glass reinforced nylon with a stainless steel spring • High flow with low pressure loss • Normally closed • Easy in-line maintenance • Smooth valve opening and closing prevents pressure surge hazards • Rugged, reinforced self-cleaning diaphragm provides reliable operation even with contaminated water • Flow control handle for water flow adjustment and manual shutoff • Manual internal bleed override beneath the LEMA solenoid for opening the valve without external water spill

Flow Rate

5

PERFORMANcE FlOw RATE (GPM) 9 13 18 22 26

Size 3/4” 3 3.5 4.2 Size 1” 3 3 4 Flow Rate 35 45 65 Size 1 1/2” 2.8 3.2 4.2 Size 2” 2.7 3.1

6 4.5 90 5.0 4.3

7.2 5 120 6.6 5.3

31

• Flow Rate: ° 3/4”: .1-28 GPM (.23-6.4 m3/h) ° 1”: .2-35 GPM (0.45-8 m3/h) ° 1 1/2”: 20-132 GPM (4.5-30 m3/h) ° 2”: 30-160 GPM (6.8-36 m3/h) • Operating Pressure: 10-150 PSI, (.7-10.5 BAR) • Temperature Range: Up to 170°F (76.2°C) • Body Style: Globe • 3/4”, 1”, 1 1/2” and 2” FNPT Inlet and Outlet • Valve Thread: .75”-20 UNES-2A • Solenoid Thread: 11⁄16”-12 UN

Materials: • Valve Body and Cover: Glass Reinforced Nylon • Diaphragm: Nylon Fabric Reinforced Polyisoprene (NR)

MAXIMUM WIRE RUNS PSI

• Metal Parts and Screws: Stainless Steel 303

170

• Solenoid Housing: Nylon

150

• Solenoid Stainless Steel Parts: 430F • Plunger Cup: EPDM

160

140 130 120 14 AWG

110

12 AWG

100

Valve Dimensions: • 3/4” and 1”: 4.5” H x 4.25” L x 3.12” W, (11.5 cm H x 11 cm L x 8 cm W) • 1 1/2”: 7.12” H x 6.12” L x 5.75” W, (18 cm H x 16 cm L x 14.5 cm W)

90 80 70 60 0

0

2000 2500

3000

3500 4000 4500 5000 5500 6000

6500

7000

7500

FEET

• 2”: 8.5” H x 6.12” L x 5.75” W, (21 cm H x 16 cm L x 14.5 cm W)

35

8.5 • • 5.5 7 8.5 132 154 160 8.5 • • 6 8.5 9.1

Pressure Loss (PSI) Flow Rate Size 3/4” Size 1” Flow Rate Size 1 1/2” Size 2”

1 0.21 0.20 55 0.20

FlOw RATE M3/h 2 3 4 5 0.25 0.23 10 0.22 0.19

0.30 0.28 15 0.30 0.22

0.42 0.33 20 0.35 0.30

0.51 0.35 27 0.46 0.37

6

7

8

0.60 • • 0.39 0.51 0.60 30 35 36 0.60 • • 0.42 0.60 0.64

Pressure Loss (bar) • Not recommended

ORDERING INFORMATION Model 160HE-075 160HE-100

43

Description Standard actuator on 3/4” in-line valve Standard actuator on 1” in-line valve

ORDERING INFORMATION Model 160HE-150 160HE-200

Description Standard actuator on 1 1/2” in-line valve Standard actuator on 2” in-line valve

1.800.322.9146


leit controllers and accessories lema 1600he solenoid DIG LEMA 1600HE is an encapsulated, zero maintenance, high efficiency, watertight, twoway magnetic solenoid actuator that requires minimal power, for use with the LEIT X and 4000 series controllers. The LEMA 1600HE can replace conventional solenoids on most valves, enabling the LEIT irrigation controllers to operate most brand name valves using DC power at a long distance of up to 4500 ft using 14 AWG wire.

speciFications:

• Solenoid Actuator Thread: 11 ⁄16”-12 UN • Pressure Range: 10-150 PSI (.7-10.5 BAR) • Control Orifice: 0.62” ± 0.001 (1.6 mm) • Pilot Flow: Minimum .075 GPM at 80 PSI (2.83 l/h at 5.6 BAR) • Temperature: 32-170°F (0-77°C) • Weight (Without Adapter, Handle and Electronics): 4.0 oz. (113 g) • Total Weight: .4 lbs • Leads: 18” (45 cm) AWM 1015 18 AWG VW- Red and White Wires

ValVe adapters

Materials: • PC Board Housing: ABS

Features: • Designed to work with LEIT 4000 and LEIT X or XRC controllers only • Adaptable to a wide range of valves using DIG valve adapters • Waterproof construction: sealed plastic over molding

• Solenoid Housing Over Mold: Nylon • Solenoid Housing Base: Nylon

• Available for a wide range of plastic or brass valves • Made of durable plastic

• Inside Housing Stainless Steel Part: 430F

Materials:

• Plunger Rubber Cap: EPDM

• Adapter: Nylon

• O-ring: Buna-N

• O-ring: Buna-N • Sleeve: Poly

• Encapsulated plunger and spring for reliable operation

Dimensions:

• Internal bleed, manual override for manual ON/ OFF

• Length: 2.33” (6 cm) (without adapter, handle and electronics)

• Surge protected with built in self diagnostic capability for short wire or open wire failure

• Diameter: 1.206” (3.6 cm)

• Uses 18 gauge two color-coded 18” wires MAXIMUM WIRE RUNS PSI 170 160 150 140 130 120 14 AWG

110

12 AWG

100 90 80 70

ORDERING INFORMATION

60 0

0

2000 2500

3000

3500 4000 4500 5000 5500 6000

6500

7000

Model 30-920

7500

FEET

30-921

Description Solenoid plastic adapter for BERMAD 200 series, HIT 500 series, DOROT series 80 Solenoid plastic adapter for RAIN BIRD DV, DVF, PGA, PEB, GB, EFB-CP, BPE, PESB, ASVF

30-922

ORDERING INFORMATION Model LEMA 1600 HE

www.digcorp.com

Description Solenoid with internal bleed manual override

Solenoid plastic adapter for HUNTER ASV, HPV, ICV, PGV, SRV, IBV, ASVF 30-923 Solenoid plastic adapter for WEATHERMATIC 12000, 21000 series 30-924 Solenoid plastic adapter for IRRITROL 100, 200B, 205, 217B, 700 series, 2400, 2500, 2600 series, TORO 220, P220 series, GRISWOLD 2000, DW 30-925 Solenoid plastic adapter for SUPERIOR 950, HUNTER HBV, TORO 252 (1.5” and larger), BUCKNER VB series

44


leit controllers and accessories stainless steel enclosure Though LEIT irrigation controllers are manufactured with a vandal resistant case, some customers may desire additional protection. DIG’s stainless steel enclosures come in two sizes to fit either the LEIT 4000 or the LEIT X series controllers. Each enclosure is made out of the highest quality stainless steel and offers top of the line weather and vandal resistance. Enclosure Features: • Manufactured using the highest quality stainless steel material • Weatherproof, rustproof and extremely durable • Grid design on top ensures light access to photovoltaic valves • Easy to install with a standard 3/8” socket wrench • Installation of the enclosure does not require the controller to be removed or modified in any way

speciFications

• 14 AWG 304 Stainless Steel Case • Dimensions: ° 4000 Series: 10.8” H x 7.5” W x 3.8” D (27.4 cm H x 19 cm W x 9.6 cm D) ° X Series: 14” H x 8.7” W x 6” D (35 cm H x 22 cm W x 15 cm D) • Weight: ° 4000 Series: 6.2 lbs (2.8 kg) ° X Series: 10.9 lbs (5 kg)

Security: • Heavy-duty stainless steel provides maximum strength • Internal hinge eliminates forceful removal of the door • Stainless steel mounting clamp is only accessible from inside the enclosure, so no unauthorized removal of the enclosure is possible • Each enclosure comes with a high security stainless steel disc-lock to ensure only authorized access to the controller

leit key Features: • The LEIT key is powered by a 9-volt battery and prevents unauthorized access to the controller’s schedule and programs • Easy installation of one 9-volt battery (not included with the unit)

• Airflow holes on top and bottom of each enclosure control the temperature inside

ORDERING INFORMATION ORDERING INFORMATION Model ENCL4000

45

Description LEIT 4000 series stainless steel enclosure

Model ENCL X

Description LEIT X and XRC series stainless steel enclosure

ORDERING INFORMATION Model Description LEIT KEY Programming tool to enter LEIT controller

1.800.322.9146


leit controllers and accessories mountinG column Mounting column designed with a curved bottom to allow easy access to the actuator wires. Available in two sizes, for LEIT 4000 and LEIT X. Features: • Mounting columns are available with two different OD: small OD for the 4000 series and larger OD for the LEIT X series • Includes mounting kit

speciFications:

4000 Series: • Column Weight: ° Short: Approx. 9 lbs (4.1 kg) ° Long: Approx. 13.5 lbs (6.1 kg) X Series: • Column Weight ° Short: Approx. 11 lbs (5 kg) ° Long: Approx. 14 lbs (6.3 kg)

Material: • Galvanized Steel

switch type sensor adapter The weatherproof SKIT switch-type sensor adapter provides a quick, reliable way to connect compatible rain, freeze, moisture and other normally closed switch-type sensors either directly to the LEIT series of irrigation controllers or directly to one of the series of micro-power actuators. Features: • Waterproof construction • Easy to install • Adapts to a wide range of sensors

relay interFace kit The RKIT relay interface provides a simple, reliable, waterproof way to switch a relay of an AC or DC circuit. The LEIT series controllers can be used to turn a pump on and off. To enable the LEIT controller to use the RKIT to turn on a pump, the RKIT must be connected to the station connector strip unit labeled MV/P. If any other AC or DC equipment is needed for relay switching, it can be connected to any other available station connector strip. Features: • Waterproof construction

Sensor Recommendation:

• Easy to install

• Recommended rain sensors are the HUNTER Mini-Clik II, Model 502 and the RAIN BIRD RSD.

Choosing the Correct RKIT Model:

• Recommended moisture sensors are the IRROMETER RA and TGA series.

• The RKIT 8810S is used for installation with a LEIT 4000, LEIT X, and XRC

• Recommended freeze sensor is the HUNTER Freeze Click.

speciFications:

• Compatible with Normally Closed Switch Type Sensors Only • Comes with 12” 12 Gauge Wire • Length: Approx. 1.25” (3.1 cm) • Diameter: Approx. 0.75” (1.9 cm) • Weight: Approx. 2 oz (56 g)

electrical speciFications:

• High Power V2 Pulse Input • Rated Load 10A, 250 AC or 30V DC • Max Voltage 380 VAC 125 VDC

speciFications:

• Length: Approx. 1.9” (4.7 cm) • Diameter: Approx. 1.1” (2.7 cm) • Weight: Approx. 8 oz (220 g)

ORDERING INFORMATION Model Description MCOL 4000 Mounting column 32” (81 cm) short MCOL 4000L Mounting column 48” (124 cm) long MCOLXS Mounting column 35” (89 cm) short MCOLXL Mounting column 51” (129 cm) long

www.digcorp.com

ORDERING INFORMATION Model Description SKIT 8821-4 4 sensor adapter

ORDERING INFORMATION Model Description RKIT 8810S Relay interface for standard stations

46


head loss charts FRIcTION lOss chARTs Polyethylene (PE) Tubing Size ID OD Wall Thick GPM

1/2” 0.520 0.620 0.050 Vel. P.S.I F.P.S. Loss

1/2” 0.600 0.700 0.050 Vel. P.S.I. F.P.S. Loss

1/2” 0.620 0.710 0.045 Vel. P.S.I. F.P.S. Loss

5/8” 0.720 0.830 0.055 Vel. P.S.I. F.P.S. Loss

Distribution Tubing 3/4” 0.830 0.940 0.055 Vel. P.S.I. F.P.S. Loss

1” 1.060 1.200 0.070 Vel. P.S.I. F.P.S. Loss

0.25 0.38 0.09 0.28 0.04 0.27 0.04 0.20 0.02 0.15 0.01 0.09 0.00 0.50 0.75 0.32 0.57 0.16 0.53 0.14 0.39 0.07 0.30 0.02 0.18 0.01 0.75 1.13 0.68 0.85 0.34 0.80 0.29 0.59 0.14 0.44 0.07 0.27 0.02 1.00 1.51 1.17 1.13 0.58 1.06 0.50 0.79 0.24 0.59 0.12 0.36 0.04 1.25 1.89 1.76 1.42 0.88 1.33 0.75 0.98 0.36 0.74 0.18 0.45 0.06 1.50 2.26 2.47 1.70 1.23 1.59 1.05 1.18 0.51 0.89 0.25 0.54 0.08 1.75 2.64 3.29 1.98 1.64 1.86 1.40 1.38 0.67 1.04 0.34 0.64 0.10 2.00 3.02 4.21 2.27 2.10 2.12 1.79 1.57 0.86 1.18 0.43 0.73 0.13 2.25 3.39 5.23 2.55 2.61 2.39 2.22 1.77 1.07 1.33 0.54 0.82 0.16 2.50 3.77 6.36 2.83 3.17 2.65 2.70 1.97 1.31 1.48 0.65 0.91 0.20 2.75 4.15 7.59 3.12 3.78 2.92 3.22 2.16 1.56 1.63 0.78 1.00 0.24 3.00 4.53 8.91 3.40 4.44 3.18 3.79 2.36 1.83 1.78 0.92 1.09 0.28 3.25 4.90 10.34 3.68 5.15 3.45 4.39 2.56 2.12 1.92 1.06 1.18 0.32 3.50 5.28 11.86 3.97 5.91 3.71 5.04 2.75 2.43 2.07 1.22 1.27 0.37 3.75 5.66 13.48 4.25 6.72 3.98 5.73 2.95 2.77 2.22 1.38 1.36 0.42 4.00 6.04 15.19 4.53 7.57 4.25 6.45 3.15 3.12 2.37 1.56 1.45 0.47 4.50 6.79 18.89 5.10 9.41 4.78 8.03 3.54 3.88 2.67 1.94 1.63 0.59 5.00 7.54 22.96 5.67 11.44 5.31 9.76 3.94 4.71 2.96 2.36 1.82 0.72 5.50 8.30 27.39 6.23 13.65 5.84 11.64 4.33 5.62 3.26 2.91 2.00 0.86 6.00 9.05 32.18 6.80 16.04 6.37 13.67 4.72 6.61 3.55 3.31 2.18 1.01 6.50 9.81 37.32 7.37 18.60 6.90 15.86 5.12 7.66 3.85 3.84 2.36 1.17 7.00 10.56 42.82 7.93 21.34 7.43 18.19 5.51 8.79 4.15 4.40 2.54 1.34 7.50 11.32 48.65 8.50 24.25 7.96 20.67 5.90 9.99 4.44 5.00 2.72 1.52 8.00 12.07 54.83 9.07 27.33 8.49 23.30 6.30 11.25 4.74 5.63 2.90 1.71 8.50 12.83 61.34 9.63 30.57 9.02 26.06 6.69 12.59 5.03 6.30 3.09 1.92 9.00 13.58 68.19 10.20 33.99 9.55 28.98 7.08 14.00 5.55 7.01 3.27 2.13 9.50 14.33 75.37 10.77 37.57 10.08 32.03 7.48 15.47 5.63 7.75 3.45 2.36 10.0 15.09 82.88 11.33 41.31 10.61 35.22 7.87 17.01 5.92 8.52 3.63 2.59 11.0 16.60 98.89 12.47 49.29 11.68 42.02 8.66 20.30 6.51 10.16 3.99 3.09 12.0 18.11 116.2 13.60 57.90 12.74 49.36 9.44 23.85 7.11 11.94 4.36 3.63 13.0 19.62 134.7 14.73 67.16 13.80 57.25 10.23 27.66 7.70 13.85 4.72 4.21 14.0 15.87 77.04 14.86 65.67 11.02 31.72 8.29 15.88 5.08 4.83 15.0 17.00 87.54 15.92 74.63 11.81 36.05 8.88 18.05 5.45 5.49 16.0 18.13 98.65 16.98 84.10 12.59 40.63 9.48 20.34 5.81 6.19 18.0 19.11 104.6 14.17 50.53 10.66 25.30 6.54 7.69 20.0 15.74 61.42 11.84 30.75 7.26 9.35 22.0 17.31 73.27 13.03 36.68 7.99 11.16 24.0 18.89 86.08 14.21 43.10 8.71 13.11 26.0 15.40 49.99 9.44 15.20 28.0 16.58 57.34 10.17 17.44 30.0 17.77 65.15 10.89 19.82 32.0 18.95 73.43 11.62 22.33 34.0 12.35 24.99 36.0 13.07 27.78 38.0 13.80 30.70 40.0 14.52 33.76 42.0 15.25 36.95 44.0 15.98 40.28 46.0 16.70 43.74 48.0 17.43 47.32 50.0 18.16 51.04 55.0 19.97 60.89 60.0 65.0 70.0 Note: Shaded areas of chart indicate where velocities exceed 5 ft. per second. Use with caution. Head Loss Per 100 feet of polyethylene tubing (PSI/100 ft.)

47

Size ID OD Wall Thick GPM

GPH

1/8” Vinyl 0.125 0.187 0.031 Vol PSI F.P.S. Loss

0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.70 0.80

3.0 6.0 9.0 12.0 15.0 18.0 21.0 24.0 30.0 36.0 42.0 48.0

1.3 2.6 3.9 5.2 6.5 7.8 9.1 10.4 13.1 15.6 18.2 20.8

4.77 17.20 36.45 62.06 93.77

1/4” Vinyl 0.156 0.245 0.045 Vol PSI F.P.S. Loss

1/4” Poly 0.170 0.250 0.040 Vol PSI F.P.S. Loss

0.8 1.6 2.5 3.3 4.1 5.0 5.8 6.7 8.3 10.0 11.7 13.4

0.7 1.4 2.1 2.8 3.5 4.2 4.9 5.6 7.0 8.4 9.8 11.2

1.62 5.86 12.4 21.12 31.91 44.71 59.47 76.13 115.04 161.18 214.37 274.44

1.07 3.86 8.16 13.90 21.01 29.43 39.14 50.11 75.72 106.1 141.11 180.58

Head Loss Per 50 feet of distribution tubing (PSI/50 ft.) 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.70 0.80

3.0 6.0 9.0 12.0 15.0 18.0 21.0 24.0 30.0 36.0 42.0 48.0

1.3 9.54 2.6 34.4 3.9 72.89 5.2 124.11 6.5 187.53 7.8 9.1 10.4 13.1 15.6 18.2 20.8

0.8 1.6 2.5 3.3 4.1 5.0 5.8 6.7 8.3 10.0 11.7 13.4

3.24 11.71 24.80 42.23 63.82 89.42 118.93 152.25 230.07 322.36 428.74 548.89

0.7 1.4 2.1 2.8 3.5 4.2 4.9 5.6 7.0 8.4 9.8 11.2

2.13 7.71 16.32 27.8 42.01 58.86 78.28 100.22 151.44 212.20 282.22 361.16

Head Loss Per 100 feet of distribution tubing (PSI/100 ft.)

1.800.322.9146


charts and Formulas cAlculATING DRIPlINE DEsIGN FORMulAs Dripline application rate calculation: 231.1 x emitter flow rate (GPH) Dripline spacing (in.) x drip spacing (in.) Calculating flow rate per zone or line: number of emitters x flow rate per emitter (GPH) 60 Calculate number of drippers per zone: Total dripline length (feet) x 12 Drip emitter spacing (inch)

cataloGs and speciFication sheets Specification sheets and catalogs are available to assist in the design and planning process. These documents are also available on our website in PDF format at www.digcorp.com. 9 10 1

11

2 3 4 5 6

TO CONVERT

A

cONvERsION chARTs MULTIPLY BY TO CONVERT

FlOw RATE U.S. GPH liter/hour U.S. GPM liter/hour U.S. GPM cu. feet/second U.S. GPM m3/hour liter/second U.S. GPM liter/second U.S. GPH liter/second m3/hour liter/hour U.S. GPH liter/hour U.S. GPM m3/h U.S. GPM cu. feet/second m3/h m3/h cu. feet/second cubic feet gallons

3.785 227.1 0.002228 .2273 15.85 951.002 3.6 0.26417 0.004403 4.40288 101.9 0.00981 7.4805

P.S.I. P.S.I. P.S.I. feet feet feet meter meter atm atm atm atm bar bar bar bar bar

PREssuRE/hEAD bar meter feet atm P.S.I. bar P.S.I. atm bar meter bar P.S.I. P.S.I. atm bar P.S.I. feet

0.07031 0.7031 2.307 0.02919 0.4335 0.03048 1.422 0.0967 1.0336 10.336 1.01365 14.7 14.504 0.9865 1.0197 14.223 32.81

ounce lbs kg

wEIGhT gram ounce lbs

28.36 16 2.20464

foot candle

ENERGy Lux

10.764

Celsius Fahrenheit

TEMPERATuRE Fahrenehit Celsius

7 8

T.O.P. 12 ZOnE DRIP HEAD-B

INTO

LEIT 4000 and 4000E Controllers Typical Installation Drawing File No.: LEIT 4000.exe

LEIT X and XR Controllers Typical Installation Drawing File No.: LEIT X.exe T.O.P. 12-Outlet Drip Head Typical Installation Drawing File No.: TOP.exe

150S- 150, 200, 1-1/2” and 2” REMOTE CONTROL VALVE ASSEMBLY

3/4” REMOTE CONTROL VALVE ASSEMBLY

T.O.P. 12-ZONE DRIP HEAD USING 1/8” DISTRIBUTION TUBING

RAIN SENSOR ASSEMBLY COLUMN MOUNTED

T.O.P. 12-ZONE DRIP HEAD USING 1/4” DISTRIBUTION TUBING

T.O.P. 12-ZONE DRIP HEAD USING 1/4” DISTRIBUTION TUBING

ORDERING INFORMATION Model 41-004 41-014 26-405 26-406 26-407 26-408

Description Take One Literature Specification Drawings CD Specifications, LEIT 4000 Specifications, LEIT X and XR Specifications, TOP LEIT-2 Specifications

www.digcorp.com

(1.8)+32 (F-32):1.8

AREA EquIvAlENTs 1 acre = 43,560 ft squared = 4840 yd 2 = 0.4047 hectares = 160 rods squared = 4047 m 2 = 0.0016 sq. mile 1 acre-inch = 102.8 m 3 = 27,154 gal = 3630 ft 3 1 hectare (ha) = 10,000 m 2 = 100 are = 2.471 acres = 107,639 ft squared 1 cubic foot (ft 3) = 1728 in 3 = 0.037 yd 3 = 0.02832 m 3 = 28,320 cm 3 1 square foot (ft 2) = 144 in 2 = 929.03 cm 2 = 0.9290 m 2 1 square yard (yd 2) = 9 ft 2 = 0.836 m 2 1 cubic yard (yd 3) = 27 ft 3 = 0.765 m 3 FlOw EquIvAlENTs 1 gpm = 0.134 ft 3/minute 1 ft (cubed) /min (cfm) = 449 gal/hr (gph) = 7.481 gal/min

inch feet feet yard mile mile inch mm meter cm cm cm cm cm square inch square inch square feet square feet square feet square yard square yard square yard square mile square mile acre acre square cm square meter square meter square km acre acre-feet acre-feet acre-feet acre U.S. gallon U.S. gallon U.S. gallon U.S. gallon U.S. GPM cubic inch cubic inch cubic feet cubic feet cubic meter HP/U.S. HP/metric HP/U.S.

uNITs sq. In sq. Ft. sq. yd. sq. cm sq. m

sq. In. 1 144 1296 0.155 1550

INTO

MULTIPLY BY

lENGTh feet cm yard meter meter yard cm inch inch inch yard feet meter milimeter

0.08333 30.48 0.3333 0.9144 1609.344 1760 2.54 0.03937 39.3701 0.3937 0.1094 0.03281 0.01 10

AREA square feet square cm square cm square meter square inch square meter square inch square feet square km acre square feet square yard square inch square feet square yard square mile hectare square feet cubic feet meter (cubed) square meter

0.00694 6.4516 929.03 0.0929 144 0.836 1296 9 2.59 640 43560 4840 0.155 10.7639 1.196 0.3861 0.404686 325,851 43560 1233.5 4047

vOluME cubic inch cubic feet liter cubic meter m3/h cubic cm U.S. gallon cubic inch liter U.S. gallon

231 0.13368 3.7854 0.0037854 0.22715 16.3871 0.004329 1728 28.32 264.172

HP/metric HP/U.S. kilowatt

sq. Ft. 0.006944 1 9 0.001076 10.76

sq. yd. 0.0007716 0.1111 1 0.0001196 1.196

1.014 0.986 0.7457

sq. cm 6.452 929 8361 1 10,000

sq. m 0.000645 0.0929 0.8361 0.0001 1

48


warranty DIG Corporation warrants to its customers who have purchased DIG professional irrigation products from an authorized DIG distributor. We guarantee the products are free from original defects in material and workmanship under normal uses from the date of original manufacture for: LEIT controllers: 3 years Lema solenoids and accessories: 3 years LEIT-2 system and accessories: 3 years Battery operated controllers: 3 years Filters, drip irrigation and accessories: 3 years ¼” (4 mm) Dripline: 3 years ½” (16-17 mm) Dripline: 4 years Drip tubing: 5 years If any apparent defect arises under normal use and service in the DIG product within the warranty period, DIG at its sole discretion, shall have the option to repair or replace part or all of the original product, free of charge after return of such product at user expense, authorized in writing by DIG Corporation. If a product is replaced, the nreplacement product will be covered for the remainder of the warranty period dating from the original purchase. This warranty

applies only to the DIG Corporation professional irrigation products, which are installed as specified and used for irrigation purposes. This warranty applies only to products, which have not been altered, modified, damaged, misused nor misapplied. This warranty does not coverproducts adversely affected by thesystem into which the products are incorporated, including improperly designed, installed, operated, or maintained systems. This warranty does not apply to blockage of solenoids, valves, drip line, drippers and micro sprinklers due to use of water containing corrosive chemicals, electrolytes, sand, dirt, silt, rust, scale, algae, bacterial slime or other organic contaminants. Tampering with a product (including, but not limited to attempting to disassemble a LEIT controller) will void any warranty the product might otherwise be eligible for. In no event shall DIG’s liability exceed the selling price of the product. DIG is not liable for consequential, incidental, indirect or special damages, including but not limited to the labor to inspect, remove or replace products, vegetation loss, loss of energy or water, cost of substitute equipment or services, property damage, loss of use or loss of profits; nor is DIG liable for economic losses, consequential damages or damage to property

arising out of installer’s negligence or based on strict liability in tort. The user and/or trade customer agrees to the limitations and exclusions of liability of this warranty by purchase or use of DIG products. No representative, agent, distributor or other person has the authority to waive, alter, or add to the printed provisions of this warranty, or to make any representation of warranty not contained here. Some states do not permit the exclusion or limitation of incidental or consequential damages or of implied warranties. Therefore, some of the above exclusions or limitations may not apply to you. This warranty on DIG professional irrigation products is given expressly and in place of all other expressed or implied warranties of merchantability and fitness for a particular purpose, and this warranty is the only warranty on the professional irrigation products made by DIG Corporation. For more information please see your DIG Corporation distributor or write to DIG Corporation, 1210 Activity Drive, Vista, CA 92081 USA. Copyright 2003-2007 DIG Corporation. All rights reserved. LEIT, LEIT Link name and logo are registered trademarks and LEIT X, LEIT XR, LEIT XRC and DIG logo are tradenames of DIG Corporation.

Copyright 2003-2009 DIG Corporation. All rights reserved. LEIT, LEIT Link name and logo are registered trademarks and LEIT X, LEIT XR, LEIT XRC and DIG logo are tradenames of DIG corporation.

49

1.800.322.9146


customer satisFaction • Professional Sales Team • Knowledgeable Customer Service Staff • Personal Technical Assistance • Extensive Web Support

Customer Satisfaction is the cornerstone of DIG’s philosophy. Your success with our products determines the future of our company. We are prepared to help answer your questions through each step of implementing your irrigation projects. We have people available to give advice when designing your systems, ordering products, and implementing projects.

Sales Team DIG’s professional, experienced sales team is ready to assist you with all of your irrigation needs, from design questions to on site training. Our knowledgeable salespeople are available to answer questions and make recommendations using DIG products through all stages of your project.

Customer Service DIG’s courteous, knowledgeable customer support department is on hand to provide a personal touch to the order and delivery process. Our goal is to know our customers and fulfill the customer’s needs and requirements. From data entry to the moment the product arrives at your door DIG’s customer support is at your service.

Technical Assistance Technical assistance is just a phone call away. DIG’s tech support department is versed not only in the DIG product line but experienced in most irrigation product lines. Our department is managed by experienced landscape and irrigation contractors who understand the need for a quick response and accurate information. We are ready to assist you at 800-322-9146 or e-mail tech@digcorp.com

On-Line Technical Information a wealth of information regarding DIG products is available on-line at www.digcorp.com This valuable reference contains on-line catalogs, CaD details, specifications, programming instructions, instruction manuals, installation guides, and parts lists, all in an easy to access format.

www.digcorp.com

50


Comm_Catalog_10_22  

DIG is dedicated to the research and development of quality, environmentally conscious irrigation products that support our customers’ needs...

Advertisement
Read more
Read more
Similar to
Popular now
Just for you