Page 1

ANTELCO P U T T I N G

W A T E R

W H E R E

I T

速 C O U N T S !

2012 Irrigation Equipment Metric Catalogue www.antelco.com


Irrigation Equipment: Facts To Consider ®

• Contract a professional irrigation designer; insist on a system to suit your plants and your soil. • Install efficient micro-irrigation emitters wherever possible. • Install an irrigation controller with multiple programmes, seasonal adjustment, and a rain switch. Consider soil moisture devices. • Mulch around your plants to conserve water in the soil. • Irrigate to encourage deep roots - but don’t over-irrigate. • Monitor your water use – you may need expert advice. • Check and clean the various components of your system at the beginning and end of the irrigation season to make sure they are working properly.

FILTRATION It is easier to clean a single filter than many emitters. An effective filter which protects downstream components, is an important feature of all irrigation systems. Four types of filters are used to protect irrigation systems: Screen filters – typically used for relatively clean water (eg. city water) but not recommended where organics such as algae are present. They usually comprise a plastic or stainless steel screen and should be manually cleaned on a regular basis according to the degree of clogging that has occurred. Disc filters – these are made up of moulded plastic discs, stacked on top of one another in the filter housing. The discs are grooved according to the rating of the filter. The grooves become gradually blocked over time with the contaminants in the water. Manual cleaning involves loosening the disc cartridge and washing the discs individually. Sand media filters – these filters are pressurised tanks containing sand and are primarily used where organic matter content of the water is high. The dimensions of the sand grains are chosen according to the size of the emitter orifice they are intended to protect. Sand separators – strictly speaking, these are not filters, but are devices that cause the water to be rotated in the body of the equipment. Centrifugal action forces heavier particles within the water to move to the outside of the stream and then fall to the base of the separator where they are collected and can be removed. In summary, screen and disc filters are commonly used to protect drippers, jets, sprayers and mini-sprinklers irrigating residential gardens, and all four filter types are used in large-scale agricultural and commercial irrigation projects. When specifying filtration requirements, it is necessary to refer to the minimum cross section dimensions of drippers and the minimum nozzle size of jets, sprayers and mini sprinklers. The degree of filtration provided by a filter is described either in terms of the size of the holes in the screen in microns, or the number of holes per linear inch. The conversions given below are approximate. Drip Irrigation Although variable, the dimensions of the smallest pathways in drip emitters are unlikely to be less than 0.6mm. If organic matter is present in the water at high levels, such an emitter will require protection by a 75 micron / 200 mesh filter. If there is only inorganic matter present, a 175 micron / 80 mesh screen will be adequate. Jets and Sprayers Minimum orifice size is generally not less than 0.8mm, in which case a filter with a 100 micron / 140 mesh screen will cope with an organic load in the water. A 250 micron / 60 mesh screen will be adequate if only inorganic material is present. Mini Sprinklers With minimum orifice size around 1.5mm, filter screen size can vary from 175 micron / 80 mesh (organic matter present) to 500 micron / 35 mesh (only inorganic matter present). If you are uncertain about the quality of your water supply, or the minimum orifice size of your chosen emitter, seek professional advice.


C o n t e n t s ®

Micro Mate™ Tapered Emitters Micro Mate™ Tapered Fittings

4.0 4.1

Micro Fittings Take-Off Fittings DB Fittings Joiners, Elbows & Tees Directors, Clamps, End Plugs & Saddles Tap Fittings Filters Valves Stakes

5.0 5.1 5.2 5.4 5.5 5.6 5.7 5.8 6.0

Australian Conditions of Sale Export Conditions of Sale

7.0 7.1

© All photographs and drawings used in the Antelco catalogue are the property of Antelco Pty Ltd and are protected by Copyright. Reproduction in whole or in part, in any form or medium, without written approval from Antelco Pty Ltd is prohibited. ™ ® Trademarks and Registered Trademarks, where indicated, are owned by Antelco Pty Ltd.

APPENDIX

3.0 3.2 3.4 3.5

FITTINGS

Rotor Spray™ Mini Sprinklers Rotor Rain® Mini Sprinklers Rotor Max™ Midi Sprinklers GS1 Gear Drive Sprinkler

TAPERED

2.0 2.1 2.2 2.3 2.5 2.6 2.7 2.8

SPRINKLERS

Spectrum™ 360° Adjustable Flow Single Piece Jets CFd® Downspray Frame Jets™ Micro Spray Jets: Caps and Bases Micro Spray Jets: Winged Vari-Jets™ Micro Spray Assemblies

SPRAYS

1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8

DRIPPERS

Antelco is committed to product development and improvement so specifications may change without notice and without incurring liability. Revised product information is available on the website.

Shrubbler ® 360° & 180° Adjustable Flow Shrubbler® 360° Pressure Compensating Mini Bubbler 360° Adjustable Flow Pinch Drip™ Pressure Compensating DripPets® Asta® Drip Pressure Compensating Midi Drip™ Emitters CETA® Pressure Compensating Drippers Agri Drip™ Emitters

This brochure is produced on paper from sustainable forests and printed using environmentally friendly vegetable based inks.


Shrubbler® 360° & 180° Adjustable Flow Patented ®

The original patented Shrubbler® with flow adjustment. Flow and coverage can be altered by rotating the cap.

Features • • • • • •

Finger-tip flow control with shut-off option. Spike model to anchor Shrubbler® at the plant. In-Line Spike model suits 4 mm ID connection tube. Barb model for direct attachment to feeder and supply lines. Threaded model for installation into Rigid Risers and Asta® Stakes. 1/2” Threaded model for riser pipe installations.

Applications Pots, tubs, landscaped gardens and nurseries. Ideal for hanging baskets. In-Line Spike model suitable for planter boxes.

DRIPPERS

Performance 360°

180°

PRESSURE (kPa)

FLOW (lph)

DIAMETER (m)

RADIUS (m)

100 150 200

33 41 49

0.4 0.6 0.9

0.4 0.5 0.6

fully open (approx. 22 clicks)

Flow Rate 360° & 180°

Shrubbler® Barb 4 mm

Discharge (lph)

50

• 200 kPa • 150 kPa • 100 kPa

40 30 20 10 0

2

4

6

8

10

12

14

16

18

20

22

Number of clicks

Shrubbler® Thread 4 mm

Diameter (m)

Diameter of Throw 360°

Radius of Throw 180° • 200 kPa

0.8 0.6

• 150 kPa

0.4

• 100 kPa

0.2 0

10

12

14

16

18

20

0.4 0.2 0

22

• 200 kPa • 150 kPa • 100 kPa

0.6

Radius (m)

Shrubbler® Spike 4 mm

8

Number of clicks

10

12

14

16

18

Number of clicks

Shrubbler® 360° BASE TYPE

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

Barb 4 mm Thread 4 mm Thread 1/2” FNPT Spike In-Line Spike

31445 31415 31425 31495 30995

100 100 25 25 25

65 65 70 40 40

11.5 14.0 8.3 6.3 6.3

BASE TYPE

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

Barb 4 mm Thread 4 mm Thread 1/2” FNPT Spike

31245 31215 31225 31295

100 100 25 25

65 65 70 40

11.5 14.0 8.3 6.3

Shrubbler® 180° Shrubbler® Thread 1/2”

Shrubbler® In-Line Spike 4 mm

1.0

* For product specifications, see page 1.2

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

20

22


ShrubblerŽ 360° Pressure Compensating Ž

A Pressure Compensating, fixed diameter drip emitter. Gentle flow action with uniform coverage for all emitters on same supply tube.

Features • Patented design. • Pressure Compensating maintains diameter of throw over a wide range of inlet pressures. • Take-apart for easy inspection and cleaning. • Coloured cap for easy identification. • UV stabilised materials for long life.

Applications Pots, planter boxes, balcony, patio and landscape applications.

Performance PRESSURE (kPa)

FLOW (lph)

DIAMETER (m)

24 lph

100 150 200 250 300

24 29 33 36 38

0.3 0.4 0.4 0.4 0.4

ShrubblerŽ 360° PC Barb 4 mm

DRIPPERS

360° NORMAL FLOW

Flow Rate 360° +PZJOHYNLSWO

      











7YLZZ\YLR7H

ShrubblerŽ 360° PC Fixed Flow BASE TYPE

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

Barb 4 mm Spike

31685 31695

100 25

70 60

13.1 8.7

Specifications DIMENSIONS ASSEMBLED

BARB

SPIKE

HEIGHT WIDTH DIAMETER WEIGHT (approx)

25 mm 20 mm 15 mm 1.7 g

135 mm 16 mm 26 mm 5.4g

polypropylene polypropylene silicone

polypropylene polypropylene silicone

BARB 4 mm

BARB 4 mm

UV STABILISED MATERIAL

BASE CAP DIAPHRAGM

BASE/CONNECTION TYPE: Inlet ShrubblerŽ 360° PC Spike 4 mm

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

1.1


Mini Bubbler 360° Adjustable Flow ®

Gentle umbrella pattern. Flow and coverage can be altered by rotating the cap.

Features • • • • •

Finger-tip flow control with shut-off option. Spike model to anchor Mini Bubbler at the plant. Barb model for direct attachment to feeder and supply lines. Threaded model for installation into Rigid Risers and Asta® Stakes. 1/2” Threaded model for riser pipe installations.

Applications Street trees and shrubs. Flow rates allow for short watering times.

Performance

DRIPPERS

360° PRESSURE (kPa)

FLOW (lph)

DIAMETER (m)

100 150 200

100 119 130

0.2 0.3 0.5

fully open (approx. 22 clicks)

Discharge (lph)

Flow Rate 140 120 100 80 60 40 20 0

• 200 kPa • 150 kPa • 100 kPa

2

4

6

8

10

12

14

16

18

20

22

Number of clicks

Mini Bubbler Spike 4 mm

Diameter (m)

Diameter of Throw • 200 kPa

0.5 0.4 0.3

• 150 kPa

0.2

• 100 kPa

0.1 0

2

4

6

8

10

12

14

16

18

20

22

Number of clicks

Mini Bubbler 360°

Mini Bubbler Barb 4 mm

Mini Bubbler Thread 4 mm

BASE TYPE

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

Barb 4 mm Thread 4 mm Thread 1/2” FNPT Spike

31745 31715 31725 31795

100 100 25 25

65 65 70 40

11.0 13.8 8.2 6.3

Specifications: Shrubbler® and Mini Bubbler

Mini Bubbler Thread 1/2”

1.2

DIMENSIONS ASSEMBLED

BARB

THREAD

TAPER

THREAD 1/2”

SPIKE

HEIGHT WIDTH DEPTH WEIGHT (approx)

23 mm 20 mm 16 mm 1.6 g

23 mm 20 mm 16 mm 2.0 g

23 mm 20 mm 16 mm 2.1 g

34 mm 26 mm 26 mm 4.3 g

135 mm 42 mm 16 mm 5.4 g

polypropylene polypropylene

acetal polypropylene

acetal polypropylene

polypropylene polypropylene

polypropylene polypropylene

THREAD 1/2” FNPT

BARB 4 mm

UV STABILISED MATERIAL BASE/CONNECTION TYPE: Inlet

BASE CAP

BARB 4 mm

10-32 UNF TAPER # 6 THREAD 4 mm (Refer Page 4.0)

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com


Pinch Drip™ Pressure Compensating Ž

A PC dripper with a turbulent flow path, sealed to maintain pre-set discharge rates and uniformity. Ergonomically designed for easy finger/thumb installation.

Features • Registered design. • Three colour coded flow rates: 2 lph, 4 lph & 8 lph. • Turbulent flow path and self-flushing action with insect baffle to minimise blockages. • Inlet barb has built-in filter. • Outlet suitable for attaching 4 mm micro tube. • UV stabilised materials for long life.

Applications Pots, patios and landscape applications.

Performance PRESSURE (kPa)

2 lph

4 lph

8 lph

50 100 150 200 250 300 350

2.0 2.3 2.3 2.3 2.3 2.3 2.2

3.4 4.1 4.4 4.6 4.6 4.6 4.5

5.9 7.8 8.1 8.3 8.4 8.4 8.2

MINIMUM CROSS SECTION (mm)

0.7 x 0.6

0.8 x 0.8

1.2 x 0.9

DRIPPERS

Pinch DripTM PC 2 lph Barb 4 mm

DISCHARGE (lph)

* Cv for all Pinch DripTM emitters conforms to ISO 9261

Discharge Rate: Pinch DripTM PC +PZJOHYNLSWO



• 8 lph

  

• 4 lph



• 2 lph

 















7YLZZ\YLRWH

Pinch DripTM PC 4 lph Barb 4 mm

Pinch DripTM PC NOMINAL FLOW

BASE COLOUR

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

2 lph 4 lph 8 lph

Red Black Green

30705 30715 30725

100 100 100

85 85 85

10.1 10.1 10.1

Specifications DIMENSIONS ASSEMBLED HEIGHT WIDTH DEPTH WEIGHT (approx)

25 mm 28 mm 28 mm 1.1 g

UV STABILISED MATERIAL CAP polypropylene BASE polypropylene DIAPHRAGM silicone rubber

BASE/CONNECTION TYPE Inlet: BARB Outlet: SPOUT

4 mm 4 mm

Pinch DripTM PC 8 lph Barb 4 mm

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

1.3


DripPetsÂŽ ÂŽ

A Pressure Compensating dripper disguised as a fun and eye catching feature for your garden.

Features • Registered design. • 4 lph Pressure Compensating. • Turbulent flow path and self-flushing action with insect baffle to minimise blockages. • Inlet barb has built-in filter. • Outlet suitable for attaching 4 mm micro tube. • UV stabilised materials for long life. • Retail packaging for promotional counter sales.

Applications Pots, patios and landscape applications.

4 lph

DRIPPERS

Performance PRESSURE (kPa)

DISCHARGE (1ph)

50 100 150 200 250 300 350

3.4 4.1 4.4 4.6 4.6 4.6 4.5

DripPetsÂŽ Frog 4 lph PC

Discharge Rate: DripPetsÂŽ PC +PZJOHYNLSWO

      















7YLZZ\YLRWH

DripPetsÂŽ Ladybug 4 lph PC

DripPetsÂŽ 4 lph Pressure Compensating TYPE

PART NUMBER

DripPetsÂŽ Frog DripPetsÂŽ Ladybug

PACK PACKS PER QUANTITY CARTON

30815 30845

100 100

18 18

CARTON (kg) 8.5 7.4

Specifications DIMENSIONS ASSEMBLED FROG LADYBUG HEIGHT DIAMETER DEPTH WEIGHT (approx)

25 mm 30 mm 35 mm 3.6 g

25 mm 27 mm 37 mm 2.8 g

UV STABILISED MATERIAL CAP BASE DIAPHRAGM COVER - FROG COVER - LADYBUG

polypropylene polypropylene silicone rubber nylon acetal

BASE/CONNECTION TYPE Inlet: BARB Outlet: SPOUT

DripPetsÂŽ Retail Box

1.4

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

4 mm 4 mm


AstaÂŽ Drip Pressure Compensating ÂŽ

A PC spike dripper with turbulent flow path, sealed to maintain pre-set discharge rates and uniformity. A nursery and landscape spike dripper that delivers precise amounts of water direct to the plant root zone.

Features • Registered design. • Three colour coded flow rates: 2 lph, 4 lph & 8 lph. • Turbulent flow path and self-flushing action with insect baffle to minimise blockages. • Inlet barb has built-in filter. • Outlet suitable for attaching 4 mm micro tube. • UV stabilised materials for long life.

Applications Nurseries, shade houses, tree lots and landscape applications.

Performance

DISCHARGE (lph) 2 lph

4 lph

8 lph

50 100 150 200 250 300 350

2.0 2.3 2.3 2.3 2.3 2.3 2.2

3.6 4.3 4.4 4.6 4.7 4.7 4.6

5.8 7.8 8.0 8.2 8.3 8.2 8.0

MINIMUM CROSS SECTION (mm)

0.7 x 0.6

0.8 x 0.8

1.2 x 0.9

AstaÂŽ Drip PC 2 lph Spike 4 mm

DRIPPERS

PRESSURE (kPa)

* Cv for all Asta DripÂŽ emitters conforms to ISO 9261

Discharge Rate: AstaÂŽ Drip PC AstaÂŽ Drip PC 4 lph Spike 4 mm

+PZJOHYNLSWO

 

• 8 lph

 

• 4 lph



• 2 lph

 















7YLZZ\YLRWH

AstaÂŽ Drip PC NOMINAL FLOW

BASE COLOUR

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

2 lph 4 lph 8 lph

Red Black Green

30735 30745 30755

25 25 25

50 50 50

7.2 7.2 7.2

Specifications DIMENSIONS ASSEMBLED AstaÂŽ Drip PC 8 lph Spike 4 mm

HEIGHT WIDTH DEPTH WEIGHT (approx)

144 mm 33 mm 17 mm 4.5 g

UV STABILISED MATERIAL SPIKE BASE DIAPHRAGM

polypropylene polypropylene silicone rubber

BASE/CONNECTION TYPE Inlet: BARB Outlet: SPOUT

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

4 mm 4 mm

1.5


Midi Drip™ Emitters ®

4 lph dripper with barb and spike options. For efficient delivery of water to individual plants in pots and gardens.

Features • Take apart for easy inspection and cleaning. • Barb model for direct insertion into tubing. • Spike model to anchor Midi Drip™ at the plant.

Applications Shrubs and flowers, fruit trees, vines and tomatoes in a wide range of situations from home gardens to large scale nurseries.

4 lph

DRIPPERS

Performance PRESSURE (kPa)

DISCHARGE (lph)

50 75 100 125 150

2.8 3.5 4.0 4.5 4.9

MINIMUM CROSS SECTION (mm)

0.5 x 0.6

* Cv for all Midi DripTM emitters conforms to ISO 9261

Discharge Rate Discharge (lph)

8.0

Midi Drip™ Spike 4 mm

• 4 lph 6.0 4.0 2.0

0

50

100

150

200

250

300

Pressure (kPa)

Midi Drip™ Emitters 4 lph

Midi Drip™ Barb 4 mm

1.6

BASE TYPE

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

Barb Spike

30145 30195

100 25

80 50

12.7 6.4

Specifications DIMENSIONS ASSEMBLED

BARB

SPIKE

UV STABILISED MATERIAL

BASE/CONNECTION TYPE

HEIGHT LENGTH WIDTH WEIGHT (approx)

17 mm 35 mm 9 mm 1.5 g

123 mm 49 mm 9 mm 4.6 g

BODY polypropylene KEY polypropylene SPIKE polypropylene

Inlet: BARB 4 mm

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com


CETA® Pressure Compensating Drippers ®

A turbulent flow, Pressure Compensating dripper available in 3 flows.

Features • • • • • •

Take-Apart for easy inspection and cleaning. Self-flushing action with insect baffle to minimise blockages. PC barbed dripper range: 2 lph, 4 lph and 8 lph with 4 mm spout. Also available with 3 mm and 4 mm barb outlets. Coloured bases to identify flow rates. 4 lph PC Spike and In-Line Spike models to anchor CETA® at the plant.

Applications Pots, planter boxes, balcony patio and landscape applications.

Performance

DISCHARGE (lph) 2 lph

4 lph

50 100 150 200 250 300 350

1.9 2.0 2.2 2.3 2.3 2.3 2.2

3.3 3.8 4.2 4.4 4.4 4.4 4.3

MINIMUM CROSS SECTION (mm)

0.7 x 0.6

0.8 x 0.8

8 lph

DRIPPERS

PRESSURE (kPa)

6.2 7.9 7.9 8.1 8.1 8.0 7.8 1.2 x 0.9

* Cv for all CETA® PC emitters conforms to ISO 9261

CETA® PC NOMINAL FLOW

BASE COLOUR

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

2 lph 4 lph 8 lph

Red Black Green

30425 30445 30485

100 100 100

70 70 70

13.3 13.3 13.3

CETA® PC with 3 mm Barb Outlet CETA® PC 4 lph Spike 4 mm CETA® PC 4 lph In-Line Spike 4 mm

CETA® PC 2 lph Barb 4 mm

CETA® PC 4 lph Barb 4 mm

CETA® PC 8 lph Barb 4 mm

NOMINAL FLOW

BASE COLOUR

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

2 lph 4 lph 8 lph

Red Black Green

30515 30525 30535

100 100 100

60 60 60

13.5 13.5 13.5

CETA® PC with 4 mm Barb Outlet NOMINAL FLOW

BASE COLOUR

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

2 lph 4 lph 8 lph

Red Black Green

30545 30555 30565

100 100 100

60 60 60

13.5 13.5 13.5

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

60 50

9.0 7.7

CETA® PC 4 Iph Spike BASE TYPE

ORDER CODE

Spike In-Line Spike

30625 30655

25 25

Specifications

CETA® PC 2 lph Barb 4 mm 3 mm or 4mm Outlet

CETA® PC 4 lph Barb 4 mm 3 mm or 4mm Outlet

CETA® PC 8 lph Barb 4 mm 3 mm or 4mm Outlet

DIMENSIONS ASSEMBLED

CETA® PC

HEIGHT WIDTH DEPTH WEIGHT (approx)

25 mm 20 mm 16 mm 1.7 g

UV STABILISED MATERIAL

BASE/SPIKE CAP DIAPHRAGM ADAPTOR

CONNECTION TYPE: Inlet Outlet

polypropylene polypropylene silicone rubber BARB 4 mm SPOUT 4 mm

CETA® PC with 3 mm or 4 mm barb outlet

CETA® PC Spike/In-Line Spike

35 mm 20 mm 16 mm 2.0 g

135 mm 36 mm / 42 mm 16 mm 5.0 g

polypropylene polypropylene silicone rubber acetal BARB 4 mm BARB 3 mm or 4 mm

polypropylene polypropylene silicone rubber BARB 4 mm SPOUT 4 mm

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

1.7


Agri Drip™ Emitters Ž

A turbulent flow path dripper in standard and Pressure Compensating models, sealed to maintain pre-set discharge rates and uniformity.

Features • • • • •

Standard range: 2 lph, 4 lph and 8 lph. Pressure Compensating range: 2 lph, 4 lph and 8 lph. Positive barb connection to suit 4 mm ID tube. UV stabilised materials for long life. Resistant to common agricultural chemicals and fertilisers.

Applications Horticultural tree and row crops, vineyards and landscape applications.

DRIPPERS

Performance

STANDARD DISCHARGE (lph)

COMPENSATING DISCHARGE (lph)

PRESSURE (kPa)

2 lph

4 lph

8 lph

PRESSURE (kPa)

2 lph

4 lph

8 lph

50 75 100 125 150

1.4 1.7 2.0 2.2 2.4

3.0 3.6 4.1 4.6 5.0

6.0 7.4 8.4 9.3 10.2

100 150 200 250 300

2.0 2.1 2.1 2.1 2.1

3.9 4.1 4.3 4.4 4.5

8.1 8.4 8.6 8.6 8.3

MINIMUM CROSS SECTION (mm)

0.9 x 0.7 1.3 x 0.8

1.8 x 1.1

0.7 x 0.6 0.8 x 0.8 0.7x1.0

* Cv for all Agri DripTM emitters conforms to ISO 9261

Agri Drip™ Standard Emitter

Discharge (lph)

Discharge Rate: Standard Drip Emitters 16.0 14.0 12.0 10.0 8.0 6.0 4.0 2.0

• 8 lph

• 4 lph • 2 lph 50

0

100

150

200

250

300

Pressure (kPa)

Discharge Rate: Pressure Compensating Drip Emitters +PZJOHYNLSWO

 

• 8 lph

 

• 4 lph



• 2 lph

 















7YLZZ\YLRWH

Agri Drip™ Standard Drip Emitters

Agri Drip™ Pressure Compensating Emitter

NOMINAL FLOW

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

2 lph 4 lph 8 lph

30225 30245 30285

100 100 100

85 85 85

10.4 10.4 10.4

Agri Drip™ Pressure Compensating Drip Emitters NOMINAL FLOW

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

2 lph 4 lph 8 lph

30325 30345 30365

100 100 100

75 75 75

10.6 10.6 10.6

Specifications This product has been independently tested at 100 kPa by the Australian Irrigation Technology Centre, report No A9013 and A9015 (A904.9.1 for 4 and 8 lph).

1.8

DIMENSIONS ASSEMBLED HEIGHT DIAMETER WEIGHT (approx)

23 mm 20 mm 1.3 g

UV STABILISED MATERIAL BASE CAP DIAPHRAGM

polypropylene polypropylene silicone rubber

BASE/CONNECTION TYPE Inlet: BARB Outlet: SPOUT

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

4 mm 4 mm


Spectrum™ 360° Adjustable Flow ®

An adjustable flow, full circle vortex sprayer with fine water droplets. Flow and coverage can be altered by rotating the cap.

Features • • • • •

Finger-tip flow control with shut-off option. Spike model to anchor Spectrum™ at the plant. Barb model for direct attachment to feeder and supply lines. Threaded model for installation into Rigid Risers and Asta® Stakes. 1/2” Threaded model for riser pipe installations.

Applications Pots, tubs, ground cover, landscaped gardens and nurseries. Waters large garden areas when used with Asta® Stakes and risers.

Performance 360° FLOW (lph)

Diameter (m)

100 150 200

64 78 90

2.8 3.6 4.0

fully open (approx. 22 clicks)

SPRAYS

PRESSURE (kPa)

Discharge (lph)

Flow Rate • 200 kPa • 150 kPa • 100 kPa

80 60 40 20 0

Spectrum™ Spike 4mm

2

4

6

8

10

12

14

16

18

20

22

Number of clicks

Diameter of Throw • 200 kPa • 150 kPa • 100 kPa

Diameter (m)

4.0 3.0 2.0 1.0 0.0

0

2

4

6

8

10

12

14

16

18

20

22

Number of clicks

Spectrum™ 360°

Spectrum™ Barb 4 mm

Spectrum™ Thread 4 mm

BASE TYPE

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

Barb 4 mm Thread 4 mm Thread 1/2” FNPT Spike

32045 32015 32025 32095

50 50 25 25

100 100 65 40

11.8 13.8 9.1 6.5

Specifications

Spectrum™ Thread 1/2”

DIMENSIONS ASSEMBLED

BARB

THREAD

TAPER

THREAD 1/2”

SPIKE

HEIGHT WIDTH DEPTH WEIGHT (approx)

26 mm 20 mm 16 mm 1.7 g

26 mm 20 mm 16 mm 2.1 g

26 mm 20 mm 16 mm 2.7 g

37 mm 26 mm 26 mm 4.9 g

137 mm 42 mm 16 mm 5.5 g

polypropylene polypropylene acetal

acetal polypropylene acetal

acetal polypropylene acetal

polypropylene polypropylene acetal

polypropylene polypropylene acetal

BARB 4 mm

10-32 UNF TAPER # 6 THREAD 4 mm (Refer Page 4.0)

THREAD 1/2” FNPT

BARB 4 mm

UV STABILISED MATERIAL

BASE CAP DEFLECTOR

BASE/CONNECTION TYPE: Inlet

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

2.0


Single Piece Jets ®

Economical fan spray jet for effective watering.

Features • • • •

Winged base with ‘Quick’ thread for rapid and easy installation. No tools required. Choice of three spray patterns – 360°, 180°, 90°. Four colour coded flow rates.

Applications Home and landscaped gardens and horticultural applications.

Performance

SPRAYS

360° COLOUR AND ORIFICE SIZE

PRESSURE (kPa)

FLOW (lph)

DIAMETER (m)

180°

90° RADIUS (m)

Blue 1.0 mm

50 100 150

25 35 43

1.6 2.0 2.4

0.8 1.0 1.2

1.1 1.4 1.7

Green 1.5 mm

50 100 150

48 70 88

2.0 2.4 2.8

1.0 1.2 1.5

1.3 1.6 1.9

Black 1.7 mm

50 100 150

62 90 113

2.4 2.8 3.2

1.2 1.5 1.8

1.6 1.9 2.2

Red 1.9 mm

50 100 150

77 110 134

2.5 3.0 3.4

1.4 1.7 2.0

1.8 2.1 2.4

Flow Rate • Blue

Pressure (kPa)

150

• Green

• Black

• Red

125 100 75 50

10

20

30

40

50

60

70

80

90

100

110

120

130

140

Discharge (lph)

Single Piece Jet SPRAY PATTERN

Single Piece Jets 360°

Single Piece Jets 180°

Single Piece Jets 90°

COLOUR

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

360˚ 180˚ 90˚

Blue Blue Blue

15445 15425 15415

100 100 100

250 250 250

16.6 16.6 16.6

360˚ 180˚ 90˚

Green Green Green

15545 15525 15515

100 100 100

250 250 250

16.6 16.6 16.6

360˚ 180˚ 90˚

Black Black Black

15645 15625 15615

100 100 100

250 250 250

16.6 16.6 16.6

360˚ 180˚

Red Red

15745 15725

100 100

250 250

16.6 16.6

90˚

Red

15715

100

250

16.6

Specifications DIMENSIONS HEIGHT 22 mm WIDTH across wings 12 mm WEIGHT (approx) 0.6 g

2.1

ORDER CODE

UV STABILISED MATERIALS

BASE/CONNECTION TYPE

acetal

Inlet: ‘QUICK’ THREAD 4 mm

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com


CFd® Downspray

Patented ®

The C-Frame Downspray is a 360° spray jet that distributes water evenly across the wetted surface area. Stake assembly options provide savings in labour and installation time.

Features • • • • • • •

45° downspray reduces the effect of wind. Gentle spray minimises damage to delicate plant foliage. Galvanised wire stake assembly incorporates shut-off clip to stop flow. Asta® Stake assembly incorporates a hole punch for easy installation. Three colour coded frames to identify flow rates. Quick insertion thread with leak-proof design. UV stabilised for long life.

Applications Nurseries, tree lots, pot plants, home and landscaped gardens.

Performance 360°

CFd® Downspray Black

CFd® Downspray Brown

CFd® Downspray Blue

PRESSURE (kPa)

FLOW (lph)

DIAMETER (m)

Black 0.8 mm

50 100 150

16 22 27

0.6 0.6 0.5

Brown 0.9 mm

50 100 150

20 29 35

0.6 0.5 0.5

Blue 1.0 mm

50 100 150

24 34 41

0.6 0.5 0.5

SPRAYS

COLOUR AND ORIFICE SIZE

CFd® Downspray COLOUR Black Brown Blue

ORIFICE SIZE

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

0.8 mm 0.9 mm 1.0 mm

19005 19025 19015

100 100 100

90 90 90

14.4 14.4 14.4

CFd® Downspray Galvanised Wire Stake Assembly with Shut-Off Clip COLOUR Black Brown Blue

TUBE LENGTH

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

914 mm 914 mm 914 mm

43705 43725 43715

25 25 25

12 12 12

9.6 9.6 9.6

Asta® Stake CFd® Downspray Assembly COLOUR Blue Blue

TUBE LENGTH

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

300 mm 914 mm

17515 17615

25 25

16 10

11.1 8.5

Specifications DIMENSIONS ASSEMBLED

CFd® DOWNSPRAY

CFd® DOWNSPRAY

ASTA® STAKE CFd®

WIRE STAKE ASSEMBLY DOWNSPRAY ASSEMBLY

HEIGHT WIDTH DEPTH WEIGHT (approx) UV STABILISED MATERIALS

CFd® Downspray Wire Stake Assembly

Asta® Stake CFd® Downspray Assembly

FRAME STAKE ADAPTOR OFF-TAKE TUBE BARB ADAPTOR STAKE

BASE/CONNECTION TYPE: Inlet

34 mm 25 mm 8 mm 1.4 g

950 mm 25 mm 15 mm 27.8 g

acetal

acetal polypropylene polyethylene acetal galvanised steel

acetal acetal PVC acetal polypropylene

QUICK THREAD WITH SEALING BARB 4 mm

BARB 4 mm

BARB 4 mm

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

330 mm 30 mm 13 mm 24.4 g

2.2


Frame Jets™ ®

Low maintenance open spray jets which excel in performance and reliability. Deflector snaps on to frame to temporarily restrict spray diameter for young trees.

Features • • • • •

Open frame and spray plate. No moving parts. Wide range of spray patterns and trajectories. Colour coded nozzles for flow rate identification. ‘Quick’ thread for easy insertion into tubing.

Applications Specifically designed for orchards, vineyards and horticultural crops.

SPRAYS

Frame Jets™ and Deflector PACKAGING

ORDER CODE

MINIMUM ORDER

FRAME JETS™

Refer to page 2.4

1000

6000

12.7

12998

100

6000

12.5

DEFLECTOR

STANDARD CARTON

CARTON (kg)

Specifications DIMENSIONS ASSEMBLED

Frame Jet™ 210° x 8 Pattern

HEIGHT WIDTH LENGTH WEIGHT (approx)

32 mm 13 mm 27 mm 1.8 g

UV STABILISED MATERIAL FRAME acetal BASE acetal DEFLECTOR acetal

BASE/CONNECTION TYPE Inlet: ‘QUICK’ THREAD 4 mm

Due to the comprehensive range of Frame Jets™ all are made to order. Allow two weeks for assembly and despatch. Urgent orders by arrangement.

Deflector for Frame Jet™

Deflector attached to Frame Jet™ Butterfly Pattern

2.3

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com


Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

Red 1.55 mm

Green 1.3 mm

Grey 1.23 mm

Purple 1.1 mm

Blue 1.0 mm

Brown 0.9 mm

Orange 0.85 mm

16 23 29 33 37

18 26 32 37 42

21 30 37 43 48

26 37 46 54 60

31 45 55 65 73

37 53 65 76 85

42 61 75 87 98

57 84 103 120 136

50 100 150 200 250

50 100 150 200 250

50 100 150 200 250

50 100 150 200 250

50 100 150 200 250

50 100 150 200 250

50 100 150 200 250

50 100 150 200 250

12158

12138

12148

12168

12118

12128

12178

12108

Order Code

5.5 7.8 9.6 11.4 12.4

4.9 6.5 7.4 8.2 9.0

5.2 7.3 8.6 9.4 10.3

4.4 6.5 7.3 8.0 8.6

4.0 5.4 5.7 7.9 7.4

3.2 4.6 5.6 6.1 7.0

3.6 4.7 5.6 5.9 6.9

3.0 3.8 4.5 5.2 5.9

4.3 6.0 6.9 8.2 9.3

3.8 5.3 6.4 7.0 7.8

4.1 5.9 6.8 7.7 8.5

3.4 4.7 5.4 6.1 6.8

3.0 4.7 4.7 6.7 6.3

2.6 3.6 4.4 5.0 6.0

2.8 3.9 4.5 5.0 5.5

2.3 3.0 3.8 4.3 4.6

Diameter (m) High Low

26° High 12.5° Low

Flow (lph)

Press (kPa)

Trajectory

Black 0.8 mm

Base Colour

A 360° x 12

Pattern 22°

12258

12238

12248

12268

12218

12228

12278

12208

Order Code

B Butterfly

6.4 8.6 10.0 11.2 12.3

5.4 7.1 8.6 9.5 10.8

5.5 7.6 8.6 9.5 10.1

5.3 7.1 7.9 9.2 9.9

4.4 6.0 6.7 8.3 8.6

4.2 6.1 6.8 7.4 8.1

4.1 5.4 6.0 6.8 7.6

3.6 5.0 6.0 6.5 7.2

Diameter (m)

22°

12358

12338

12348

12368

12318

12328

12378

12308

Order Code

C 210° x 8

5.6 7.8 8.9 9.8 11.0

5.2 7.2 8.2 9.1 10.2

5.4 7.4 8.3 9.4 10.4

4.7 6.5 7.5 8.6 9.0

4.3 6.0 6.8 7.5 7.9

3.6 4.9 5.6 6.1 6.7

3.9 5.3 5.9 6.5 7.0

3.7 5.2 6.1 6.4 6.7

Diameter (m)

12558

12538

12548

12568

12518

12528

12578

12508

Order Code

12.5°

4.3 5.7 6.6 7.6 8.2

3.8 5.0 5.9 6.6 7.3

3.7 5.1 5.6 6.4 6.8

3.5 4.4 5.0 5.7 6.3

3.1 3.8 4.4 5.0 5.5

2.6 3.5 3.8 4.2 4.6

2.6 3.4 3.8 4.3 4.7

2.3 3.0 3.2 3.4 3.8

Diameter (m)

E 360° x 22

12658

12638

12648

12668

12618

12628

12678

12608

12708

12778

12728

12718

12768

12748

12738

12758

2.9 3.7 4.2 4.8 5.0 3.2 4.3 5.0 5.5 6.0 3.0 3.9 4.4 4.9 5.3 3.8 4.8 5.7 6.1 6.5 3.9 5.4 6.5 6.9 7.4 4.8 6.4 7.4 8.2 8.9 4.5 6.1 7.0 7.6 8.1 5.0 7.2 8.7 9.5 10.0

4.2 6.1 7.1 8.1 9.1

3.9 5.0 6.1 6.7 7.4

4.2 5.6 6.5 7.3 7.7

3.4 4.7 5.5 6.4 6.9

3.5 4.8 5.5 6.3 6.8

3.2 4.2 4.9 6.0 6.3

3.1 4.3 5.1 5.5 5.9

2.8 3.9 4.4 5.1 5.8

3.7 4.9 5.9 6.5 7.2

3.1 4.1 4.8 5.3 5.7

2.5 3.7 4.2 4.7 5.0

2.2 2.7 3.5 3.8 4.3

2.3 2.8 3.2 3.5 3.8

1.8 2.4 2.7 2.9 3.1

2.0 2.6 3.0 3.4 3.7

1.4 1.5 1.7 2.0 2.0

Diameter (m) High Low

12.5° Order Code

Diameter (m)

22° Order Code

R Rectangular

J 360° x 12

SPRAYS

PERFORMANCE

22°

12858

12838

12848

12868

12818

12828

12878

12808

Order Code

6.0 8.2 9.7 10.9 12.0

5.2 7.2 8.5 9.3 10.3

5.0 6.8 8.4 9.1 10.0

4.8 6.4 7.4 8.4 9.1

3.9 5.5 6.1 6.8 7.5

3.6 4.6 5.4 6.1 6.6

3.4 4.5 5.4 6.1 6.5

3.2 4.4 5.1 5.5 6.1

Diameter (m)

V 300° x 10

Performance and Order Codes ®

2.4


Micro Spray Jets: Caps and Bases ®

A large combination of flow rates and spray patterns is achievable when the range of caps and bases is assembled into two piece jets.

Features • • • •

Caps available in eight spray patterns. Eight colour coded bases to identify flow rate. Jet assemblies made to order. Caps and bases can be ordered separately.

Applications Assemblies suit garden bed watering and landscaped areas.

Spray Caps

SPRAYS

SPRAY PATTERN

360° 18 hole

360° 15 hole

360° 12 hole

300° 10 hole

360˚ x 18 hole 360˚ x 15 hole 360˚ x 12 hole 300˚ x 10 hole 270˚ (3 x 90˚) 180˚ fan 90˚ fan Strip (2 x 20˚)

CAP COLOUR

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

Black Black Black Black Black Black Black Black

10845 10855 10865 10875 10835 10825 10815 10885

100 100 100 100 100 100 100 100

500 500 500 500 500 500 500 500

15.1 15.1 15.1 15.1 15.1 15.1 15.1 15.1

Jet Bases 270° (3 x 90°)

180° fan

90° fan

Strip (2 x 20°)

Winged Jet Base with ‘Quick’ Thread

0.8 mm

0.9 mm

COLOUR

BASE ORIFICE SIZE

Black Brown Blue Green Red

0.8 0.9 1.0 1.3 1.5

mm mm mm mm mm

Orange Grey White

1.8 mm 2.0 mm 2.3 mm

TYPE

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

Winged Winged Winged Winged Winged

10705 10725 10715 10735 10755

100 100 100 100 100

310 310 310 310 310

17.2 17.2 17.2 17.2 17.2

Hexagon Hexagon Hexagon

10975 10945 10985

100 100 100

350 350 350

17.1 17.1 17.1

1.0 mm

Specifications: Caps and Bases DIMENSIONS

CAP

BASE WINGED

BASE HEXAGON

HEIGHT WIDTH WEIGHT (approx)

9 mm 8 mm 0.2 g

20 mm across wings 12.5 mm 0.5 g

20 mm across flats 8 mm 0.5 g

UV STABILISED MATERIALS

acetal

BASE/CONNECTION TYPE: Inlet 1.3 mm

1.5 mm

acetal

acetal

‘QUICK’ THREAD 4 mm

10-32 UNF THREAD 4 mm

Dimensions vary slightly depending on cap selected

Hexagon Jet Base 10-32 UNF Thread

Specifications: Micro Spray Jets: Winged & Tapered DIMENSIONS ASSEMBLED HEIGHT WIDTH WEIGHT (approx) UV STABILISED MATERIALS 1.8 mm

2.0 mm

2.3 mm BASE/CONNECTION TYPE: Inlet

BASE CAP

(Refer to page 2.6 & 4.0)

BASE WINGED

BASE TAPER

23 mm across wings 12.5 mm 0.7 g

21 mm across flats 8 mm 0.8 g

acetal acetal

acetal acetal

‘QUICK’ THREAD 4 mm

TAPER # 6

Dimensions vary slightly depending on selected base and cap assembly

2.5

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com


Micro Spray Jets: Winged ®

Two piece jets with precise watering patterns. Winged base for easy hand installation. Effective performance at low pressure (100 kPa).

Features • • • •

Nine optional spray patterns. Colour coded bases for flow identification. Caps feature a snap ring which firmly engages the base. UV stabilised materials for long life.

Applications Landscape areas, home gardens, nurseries and horticultural applications. Mist Jet ideal for greenhouse misting and hanging baskets. Strip Spray ideal for narrow garden beds. Use stakes and risers to elevate spray jets.

360˚ X 18 360˚ X 15 360˚ X 12 300˚ X 10

*Minimum opening size BASE COLOUR & ORIFICE SIZE

Black 0.8 mm

360° x 18 hole

180° fan

Brown 0.9 mm

Blue 1.0 mm

Green 1.3 mm

90° fan

Strip Spray (2 x 20°)

Red 1.5 mm

Orange 1.8 mm

Grey 2.0 mm

Mist Jet

360° x 18 hole

White 2.3 mm

Yellow 0.36 mm

PRESS. (kPa)

50 100 150 200 250 50 100 150 200 250 50 100 150 200 250 50 100 150 200 250 50 100 150 200 250 50 100 150 200 250 50 100 150 200 250 50 100 150 200 250 50 100 150 200 250

0.5 mm

0.6 mm

FLOW (lph)

15 22 27 32 36 20 28 34 39 44 22 33 42 49 56 36 54 68 80 91 52 75 92 107 120 64 93 115 135 152 80 115 140 165 185 113 163 200 235 265 13 18 22 25 28

0.7 mm

0.7 mm

270˚ (3 x 90˚)

Strip (2 x 20˚)

90˚

180˚

1.3 mm

1.4 mm

1.5 mm

1.5 mm

DIAMETER (m)

2.6 4.1 4.6 5.0 5.3 2.9 4.0 4.8 5.6 6.0 3.6 4.9 5.8 6.2 6.4 4.7 6.4 7.0 7.2 7.6 4.9 6.8 8.2 8.2 7.2 5.0 6.8 8.2 8.0 7.3 5.3 7.5 8.1 7.8 6.7 5.2 7.1 7.3 7.0 6.7

2.2 3.2 3.6 4.2 4.8 2.8 3.8 4.4 5.0 5.8 2.6 3.8 4.8 6.2 7.0 4.2 5.8 6.2 7.8 8.8 4.4 6.0 7.4 8.8 10.0 4.6 6.8 8.8 10.0 11.4 4.8 7.6 9.6 11.0 12.4 4.4 8.0 10.4 11.4 12.4

2.6 3.2 4.0 4.6 5.0 2.8 3.4 4.2 5.2 6.2 2.8 4.4 5.2 6.8 8.4 3.2 5.0 6.0 7.0 8.4 4.0 6.2 8.4 10.0 11.4 4.6 7.6 9.4 10.8 11.6 5.0 8.2 10.2 12.0 13.0 6.0 9.2 11.6 13.0 14.2

1.2 3.2 4.8 6.0 7.0 2.2 4.0 5.4 6.6 7.4 2.4 4.8 7.0 8.6 9.0 3.0 5.6 7.2 8.0 8.4 4.4 5.4 8.8 10.4 11.2 4.2 7.4 8.8 10.0 10.6 4.6 7.4 9.2 10.6 11.8 4.0 6.8 9.6 10.6 11.6

RADIUS (m)

2.4 3.6 2.8 2.7 2.7 2.6 3.4 2.9 2.8 3.3 3.2 4.2 3.2 3.2 3.4 3.5 3.5 3.7 3.7 3.8 3.0 3.8 4.4 4.8 5.1 3.6 4.2 4.6 4.9 5.3 3.4 4.6 5.1 5.6 6.2 3.6 5.4 6.6 7.8 8.3

2.4 4.2 5.4 6.0 6.4 2.6 4.6 6.0 6.8 7.2 2.6 4.8 5.6 5.8 5.8 3.8 5.8 7.2 8.4 9.6 4.9 6.5 8.9 10.8 11.2 5.0 8.1 9.4 10.8 11.5 5.4 9.4 12.0 13.2 13.8 5.4 9.0 11.0 12.0 12.8

1.1 1.7 2.1 2.3 2.6 1.2 1.8 2.4 2.6 2.8 1.2 2.0 2.4 2.8 2.8 1.4 2.2 2.6 2.0 3.1 1.5 2.4 2.9 3.1 3.3 1.7 2.4 2.8 3.1 3.3 1.7 2.6 3.1 3.3 3.5 1.9 3.0 3.6 3.8 4.1

MIST 1.2 mm DIAMETER (m)

1.2 1.5 1.7 1.7 1.8 1.3 1.6 1.8 1.9 2.1 1.5 1.8 2.0 2.1 2.3 1.5 2.0 2.3 2.5 2.7 1.9 2.4 3.0 3.2 3.4 1.7 2.4 2.7 3.1 3.3 1.7 2.5 3.1 3.3 3.6 2.0 2.8 3.4 4.0 4.2

SPRAYS

Performance

1.0 0.8 0.9 0.8 0.8

* Minimum opening size for Base and Cap given to assist filtration selection. Ghosted figures indicate a change of performance from spray to mist.

Micro Spray Jet: Winged

180° fan

90° fan

SPRAY PATTERN

BASE COLOUR

CAP COLOUR

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

360° x 18 hole 180° fan 90° fan Strip Spray (2 x 20°) Mist Jet 360° x 18 hole 180° fan 90° fan

Blue Blue Blue Blue Yellow Green Green Green

Red Blue Black Black Black Black Black Black

14945 14925 14115 14815 14995 14435 14235 14135

100 100 100 100 100 100 100 100

220 220 220 220 220 220 220 220

17.8 17.8 17.8 17.8 18.6 17.8 17.8 17.8

The above Spray Jet Assemblies are standard stock items. For non-standard spray jet assemblies select BASE colour and CAP colour with spray pattern. Allow two weeks for assembly and despatch. Urgent orders by arrangement. Minimum order – 1,000 Assemblies.

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

2.6


Vari-Jets™ ®

Valve adjusts flow and coverage.

Features • Choice of spray patterns. • Threaded for installation on Rigid Risers. • UV stabilised materials for long life.

Applications Home and landscaped gardens. Vari-Mist™ is ideal for adjusting overhead watering of plants in hanging baskets.

Cap Colour Options

BLACK RED

BLACK

360° x 18

Mist

BLACK BLUE

BLACK

SPRAYS

Performance *Minimum Opening Size BASE COLOUR PRESSURE FLOW OPTIONS & (kPa) (lph) ORIFICE SIZE

Vari-Jet™ 180° fan 10-32 UNF Thread

Yellow or Black max 1.5 mm

50 100 150 200 250

0 0 0 0 0

-

53 78 98 115 130

Yellow or Black max 0.36 mm

50 100 150 200 250

0 0 0 0 0

-

12 18 23 27 31

180°

0.5 mm 1.2 mm DIAMETER (m)

1.5 mm

0 0 0 0 0

0 0 0 0 0

-

4.9 6.8 8.2 8.2 7.2 0 0 0 0 0

-

-

90° 1.5 mm RADIUS (m)

1.9 2.4 3.0 3.2 3.4

0 0 0 0 0

-

1.5 2.4 2.9 3.1 3.3

1.0 0.8 0.9 0.8 0.8

* Minimum opening size for Base and Cap given to assist filtration selection. Ghosted figures indicate a change of performance from spray to mist.

Vari-Jet™ SPRAY PATTERN

BASE COLOUR TYPE

360° x 18 hole 180° fan 90° fan Mist

Yellow Yellow Yellow Yellow

360° x 18 hole 180° fan 90° fan Mist

Black Black Black Black

10-32 10-32 10-32 10-32

10-32 10-32 10-32 10-32

UNF UNF UNF UNF

UNF UNF UNF UNF

CAP COLOUR

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

Red Blue Black Black

13245 13225 13215 13295

50 50 50 50

80 80 80 80

11.3 11.3 11.3 11.7

Black Black Black Black

13145 13125 13115 13195

50 50 50 50

80 80 80 80

11.3 11.3 11.3 11.7

Specifications Vari-Jet™ 180° fan 10-32 UNF Thread

DIMENSIONS ASSEMBLED HEIGHT 32 mm WIDTH 22 mm WEIGHT (approx) 2.3 g

UV STABILISED MATERIAL CAP acetal BASE acetal KNOB HDPE

BASE/CONNECTION TYPE Inlet: 10-32 UNF THREAD 4 mm Inlet: TAPER # 6 (Refer to Page 4.0)

Dimensions vary slightly depending on selected base and cap assembly

2.7

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com


Micro Spray Assemblies ®

Pre-assembled to save on installation time. Vari-Jet™ models have flow control to adjust radius of throw and reduce flow. Effective performance at low pressure (100 kPa).

Features • Choice of four spray patterns. • Built-in hole punch. • Vari-Jet™ Spike assembled with 290 mm off-take tube and 150 mm Rigid Riser. • Asta® Stake assembly with 290 mm off-take tube on 300 mm stake. • UV stabilised materials for long life.

Applications Home and landscaped gardens.

Performance 360° x 18 PRESSURE (kPa)

Vari-Jet™ Spike Red max 1.5 mm

50 100 150 200 250

FLOW (lph) 0 0 0 0 0

180°

DIAMETER (m)

- 52 - 75 - 92 - 107 - 120

0 0 0 0 0

-

90° RADIUS (m)

4.9 6.8 8.2 8.2 7.2

0 0 0 0 0

-

1.9 2.4 3.0 3.2 3.4

0 0 0 0 0

-

1.5 2.4 2.9 3.1 3.3

SPRAYS

COLOUR AND ORIFICE SIZE

Ghosted figures indicate a change of performance from spray to mist.

Vari-Jet™ Spike SPRAY PATTERN 360° x 18 hole 180° fan 90° fan

BASE COLOUR

CAP COLOUR

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

Red Red Red

Red Blue Black

13345 13325 13315

10 10 10

14 14 14

4.8 4.8 4.8

Asta® Stake Winged™ Micro Spray Assembly Vari-Jet™ Spike 180˚ fan

SPRAY PATTERN 360° x 18 hole 180° fan 90° fan Strip spray (2 x 20°)

BASE COLOUR

CAP COLOUR

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

Blue Blue Blue Blue

Red Blue Black Black

17425 17435 17445 17455

25 25 25 25

19 19 19 19

12.4 12.4 12.4 12.4

Asta® Stake Vari-Jet™ Assembly SPRAY PATTERN 360° x 18 hole 180° fan 90° fan

(Refer page 2.6 for performance data)

(Refer page 2.7 for performance data)

BASE COLOUR

CAP COLOUR

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

Black Black Black

Black Black Black

17185 17195 17205

25 25 25

16 16 16

11.2 11.2 11.2

Specifications DIMENSIONS ASSEMBLED HEIGHT WIDTH WEIGHT (approx) UV STABILISED MATERIALS Asta® Stake Winged™ Asta® Stake Vari-Jet™ Assembly Micro Spray Assembly

SPIKE/STAKE ADAPTOR RISER KNOB OFF-TAKE TUBE BASE/CAP

BASE/CONNECTION TYPE: Inlet

VARI-JET™ SPIKE

ASTA® STAKE WINGED™ ASTA® STAKE MICRO SPRAY ASSEMBLY VARI-JET™ ASSEMBLY

355 mm 55 mm 32 g

345 mm 24 mm 26 g

polypropylene polypropylene HDPE – PVC acetal

polypropylene acetal – – PVC acetal

polypropylene acetal – HDPE PVC acetal

BARB 4 mm

BARB 4 mm

BARB 4 mm

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

360 mm 24 mm 28 g

2.8


Rotor Spray™ Mini Sprinklers ®

Durable and reliable with excellent distribution uniformity. Vari-Rotor Spray™ can be adjusted to alter flow and coverage.

Features • ‘C’ Frame design for strength and high distribution uniformity. • Full flow flipper suspended between two bearings for reliable performance. • Inverted model incorporates special khaki coloured flipper with dust cover to protect bearing. • Colour coded nozzles to identify flow rates. • Threaded for installing into Rigid Risers and 1/2” micro threaded adaptors. • UV stabilised materials for long life.

Applications Landscape areas, home gardens, nurseries and horticultural applications. Inverted Rotor Spray™ ideal for over-head greenhouse and nursery watering.

SPRINKLERS

Flow Rate • Brown • Blue

Pressure (kPa)

200

• Green

• Red • Orange

• Grey

180 160 140 120 100

0

20

40

60

80

100

120

140

160

180

200

Discharge (lph)

Rotor Spray™ COLOUR Rotor Spray™ 10-32 UNF Thread

Brown Blue Green Red Orange Grey

BASE ORIFICE SIZE 0.9 1.0 1.3 1.5 1.8 2.0

mm mm mm mm mm mm

BASE TYPE

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

10-32 10-32 10-32 10-32 10-32 10-32

20025 20015 20035 20055 20075 20045

50 50 50 50 50 50

110 110 110 110 110 110

12.5 12.5 12.5 12.5 12.5 12.5

UNF UNF UNF UNF UNF UNF

Asta® Stake Rotor Spray™ Assembly with 300 mm tube and barb adaptor COLOUR Green

BASE ORIFICE SIZE

BASE TYPE

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

1.3 mm

10-32 UNF

17245

25

16

14.5

BASE TYPE

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

10-32 10-32 10-32 10-32

UNF UNF UNF UNF

20125 20115 20135 20155

50 50 50 50

110 110 110 110

12.5 12.5 12.5 12.5

BASE ORIFICE SIZE

BASE TYPE

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

1.5 mm 1.5 mm

10-32 UNF 10-32 UNF

20295 20205

25 25

88 88

9.6 9.6

Inverted Rotor Spray™ COLOUR Inverted Rotor Spray™ 10-32 UNF Thread

Brown Blue Green Red

BASE ORIFICE SIZE 0.9 1.0 1.3 1.5

mm mm mm mm

Vari-Rotor Spray™ COLOUR Yellow Black

Asta® Stake Vari-Rotor Spray™ Assembly with 300 mm tube and barb adaptor COLOUR Black

Vari-Rotor Spray™ 10-32 UNF Thread

3.0

BASE ORIFICE SIZE

BASE TYPE

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

1.5 mm

10-32 UNF

17295

25

13

10.0

This product has been independently tested by the Australian Irrigation Technology Centre, report No A9107.9.2

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com


Performance and Specifications ® ROTOR SPRAY™

VARI-ROTOR SPRAY™

Tested 0.2 m above ground

Tested 0.2 m above ground

INVERTED ROTOR SPRAY™

Performance

BASE COLOUR & ORIFICE SIZE

PRESS. (kPa)

FLOW (lph)

DIAMETER (m)

STREAM HEIGHT (m)

DIAMETER (m)

Tested 0.8 m above ground

Tested 2.0 m above ground

DIAMETER (m)

DIAMETER (m)

STREAM HEIGHT (m)

100 125 150

31 35 38

5.2 5.6 5.6

0.2 0.3 0.4

4.0 4.2 4.2

5.4 5.8 6.0

Blue 1.0 mm

100 125 150

38 42 46

5.2 5.4 5.4

0.3 0.4 0.5

4.2 4.4 4.6

5.6 5.8 6.0

Green 1.3 mm

100 150 200

61 76 88

6.0 6.9 7.2

0.4 0.5 0.5

4.2 4.6 5.0

5.8 6.2 6.6

Red 1.5 mm

100 150 200

85 105 120

6.5 7.5 8.1

0.4 0.4 0.4

4.4 4.8 5.0

6.2 6.4 7.2

Orange 1.8 mm

100 150 200

95 117 135

6.7 7.5 8.4

0.3 0.4 0.5

Grey 2.0 mm

100 150 200

120 150 175

6.8 7.8 8.0

0.4 0.4 0.5

Yellow max 1.5 mm

100 150 200

0 - 82 0 - 105 0 - 123

0 - 6.5 0 - 7.5 0 - 8.1

0 - 0.4 0 - 0.4 0 - 0.4

Black max 1.5 mm

100 150 200

0 - 82 0 - 105 0 - 123

0 - 6.5 0 - 7.5 0 - 8.1

0 - 0.4 0 - 0.4 0 - 0.4

SPRINKLERS

Brown 0.9 mm

Specifications

Asta® Stake Rotor Spray™ Assembly

DIMENSIONS ASSEMBLED Asta® Stake Vari-Rotor Spray™ Assembly

HEIGHT WIDTH WEIGHT (approx) UV STABILISED MATERIALS

BASE/CONNECTION TYPE: Inlet

ROTOR SPRAY™ and INVERTED ROTOR SPRAY™ 35 mm 27 mm 2g

FRAME BASE FLIPPER KNOB

ROTOR SPRAY™ and INVERTED ROTOR SPRAY™

VARI-ROTOR SPRAY™

34 mm 27 mm 2.2 g

45 mm 27 mm 3.5 g

acetal acetal nylon –

acetal acetal nylon –

acetal acetal nylon HDPE

10-32 UNF THREAD 4 mm

TAPER # 6 (Refer to Page 4.0)

10-32 UNF THREAD 4 mm

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

3.1


Rotor Rain® Mini Sprinklers ®

Low trajectory, large droplet mini sprinkler.

Features • ‘C’ Frame design for strength and high distribution uniformity. • Full flow flipper suspended between two bearings for reliable performance. • Colour coded nozzles to identify flow rates. • Break-off spray deflector for close-in watering of immature trees.

Applications Vines, bananas and tree crops such as citrus and apples.

le

e

rp

ng O

Pu

ra

d Re

e

liv

Y

y

el • low O

re G

250

Pressure (kPa)

G

Bl

re

ue

en

SPRINKLERS

Flow Rate

200 150 100

0

50

100

150

200

250

300

350

400

450

Discharge (lph)

Rotor Rain® 3/8” BSPM Rotor Rain® 3/8” Thread

COLOUR Green Blue Grey Yellow Olive Red Orange Purple

BASE ORIFICE SIZE 1.5 1.7 1.9 2.0 2.1 2.4 2.6 2.8

mm mm mm mm mm mm mm mm

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

20335 20315 20345 20395 20385 20355 20375 20365

50 50 50 50 50 50 50 50

28 28 28 28 28 28 28 28

11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

20535 20515 20545 20595 20585 20555 20575 20565

50 50 50 50 50 50 50 50

20 20 20 20 20 20 20 20

11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

20435 20415 20445 20495 20485 20455 20475 20465

50 50 50 50 50 50 50 50

28 28 28 28 28 28 28 28

11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8

Rotor Rain® 1/2” MNPT COLOUR Green Blue Grey Yellow Olive Red Orange Purple

BASE ORIFICE SIZE 1.5 1.7 1.9 2.0 2.1 2.4 2.6 2.8

mm mm mm mm mm mm mm mm

Rotor Rain® 3/8” MNPT Rotor Rain® 1/2” Thread

COLOUR Green Blue Grey Yellow Olive Red Orange Purple

This product has been independently tested by the Australian Irrigation Technology Centre, report No A9010.

3.2

BASE ORIFICE SIZE 1.5 1.7 1.9 2.0 2.1 2.4 2.6 2.8

mm mm mm mm mm mm mm mm

Rotor Rain® 3/8” BSPM and 1/2” MNPT are standard items with green, blue, grey or red bases. All others assembled to order. Allow two weeks for assembly and despatch. Urgent orders by arrangement.

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com


Performance and Specifications ®

Performance Tested 0.2m above ground NOZZLE COLOUR AND ORIFICE SIZE

Rotor Rain® 3/8” Thread

FLOW (lph)

DIAMETER (m)

STREAM HEIGHT (m)

Green 1.5 mm

100 150 200 250

77 94 110 120

7.8 8.7 9.1 8.5

0.5 0.5 0.6 0.7

Blue 1.7 mm

100 150 200 250

100 125 145 163

8.6 9.3 9.6 9.3

0.7 0.7 0.8 0.9

Grey 1.9 mm

100 150 200 250

125 153 178 200

8.9 10.2 9.8 10.0

0.7 0.8 0.8 0.9

Yellow 2.0 mm

100 150 200 250

147 183 215 240

10.0 11.0 11.2 11.0

0.6 0.8 0.9 1.0

Olive 2.1 mm

100 150 200 250

168 205 235 265

10.7 11.6 11.8 11.4

0.7 0.8 0.9 0.9

Red 2.4 mm

100 150 200 250

195 240 280 315

11.0 12.5 12.5 12.1

0.6 0.9 1.0 1.0

Orange 2.6 mm

100 150 200 250

245 300 350 395

10.9 11.9 12.1 12.0

0.7 0.8 0.9 1.0

Purple 2.8 mm

100 150 200 250

265 330 385 430

11.2 12.8 13.0 12.4

0.8 0.9 1.0 1.1

DEFLECTOR DIAMETER (m) 2.8

2.8

2.8

3.0

3.0

3.2

SPRINKLERS

PRESSURE (kPa)

3.2

4.0

Rotor Rain® 1/2” Thread

Specifications DIMENSIONS ASSEMBLED HEIGHT WIDTH WEIGHT (approx)

Rotor Rain® 3/8”

Rotor Rain® 1/2”

49 mm 46 mm 8g

49 mm 46 mm 10.5 g

UV STABILISED MATERIAL FRAME FLIPPER NOZZLE

acetal nylon acetal

BASE/CONNECTION TYPE Inlet: THREAD 3/8” BSPM Inlet: THREAD 1/2” MNPT Inlet: THREAD 3/8” MNPT

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

3.3


Rotor Max™ Midi Sprinklers ®

Robust and reliable “spinner” sprinkler for use above and below plant foliage and with two trajectory options. Excellent sprinkler distribution patterns and performance.

Features • • • • • •

Dual outlet spinner enhances performance. Standard model has a 25° trajectory, black coloured spinner. Inverted model has a 0° flat trajectory, khaki coloured spinner. Suitable for recycled water applications subject to adequate filtration. Easily taken apart for servicing. UV stabilised materials for long life.

Applications Greenhouses, vegetable row crops and under tree watering. Inverted Rotor Max™ is ideal for over-head watering in glasshouse, nursery and shade house applications. The 0° trajectory sprinkler is also suited to standard upright operation, excellent for under foliage or wind affected locations.

Inverted Rotor Max™ tested 2m above ground

SPRINKLERS

Performance NOZZLE COLOUR

PRESSURE (kPa) 100 200 250 300 100 200 250 300 100 200 250 300

Red 2.8 mm

Black 3.2 mm

Purple 3.8 mm

FLOW (lph) 300 400 460 500 375 540 600 660 550 775 875 975

Rotor Max™ tested 0.2m above ground DIAMETER (m) 11.0 13.0 13.0 13.0 11.0 13.0 13.0 14.0 11.9 13.8 14.0 13.4

STREAM HEIGHT (m) 0.9 1.2 1.2 1.4 0.9 1.2 1.2 1.3 0.7 1.0 1.1 1.2

* Stream height is applicable only to the Rotor Max™

Rotor Max™

Pressure (kPa)

Flow Rate • Red

300

• Black

• Purple

250 200 150 100 200

300

400

500

600

700

800

900

1000

Discharge (lph)

Rotor Max™ 3/8” BSPM NOZZLE COLOUR ORIFICE SIZE Red 2.8 mm Black 3.2 mm Purple 3.8 mm

ORDER CODE 21155 21105 21165

PACK QUANTITY 20 20 20

PACKS PER CARTON 10 10 10

CARTON (kg) 8.0 8.0 8.0

ORDER CODE 21055 21005 21065

PACK QUANTITY 20 20 20

PACKS PER CARTON 10 10 10

CARTON (kg) 6.4 6.4 6.4

PACK QUANTITY 20 20 20

PACKS PER CARTON 10 10 10

CARTON (kg) 6.4 6.4 6.4

Rotor Max™ 1/2” BSPM NOZZLE COLOUR ORIFICE SIZE Red 2.8 mm Black 3.2 mm Purple 3.8 mm

Inverted Rotor Max™

Inverted Rotor Max™ 1/2” BSPM NOZZLE COLOUR ORIFICE SIZE Red 2.8 mm Black 3.2 mm Purple 3.8 mm

ORDER CODE 21555 21505 21565

Specifications DIMENSIONS ASSEMBLED This product has been independently tested by the Australian Irrigation Technology Centre, report No A95033.

3.4

HEIGHT WIDTH WEIGHT (approx)

96 mm 90 mm 38 g

UV STABILISED MATERIAL FRAME polypropylene SPINNER acetal NOZZLE acetal

BASE/CONNECTION TYPE Inlet: THREAD 3/8” BSPM Inlet: THREAD 1/2” BSPM

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com


GS1 Gear Drive Sprinkler

Registered Design ®

The GS1 is a fully adjustable lawn and garden sprinkler.

Features • • • • • • • •

Full or part circle adjustable spray pattern 15° to 360°. Radius adjustable from 7.5 m to 11 m. Blue watering arc indicator. Built-in filter protects working parts and nozzle. Slides easily to relocate. Whisper quiet operation. Snap-On base connection. Supplied in bar-coded retail carton.

Applications Home and landscaped gardens, and medium to large lawns.

FLOW (lph)

RADIUS (m)

STREAM HEIGHT (m)

100 150 200 250 300 350 400

520 620 730 810 880 960 1020

7.5 9.0 9.7 10.0 10.5 11.0 11.2

1.2 1.6 1.9 2.1 2.2 2.2 2.3

Flow Rate Discharge (lph)

GS1 Gear Drive Sprinkler

PRESSURE (kPa)

SPRINKLERS

Performance

1200 1000 800 600 400 200 100

150

200

250

300

350

400

300

350

400

Pressure (kPa)

Radius of Throw Radius (m)

12 10 8 6 4 2 100

150

200

250

Pressure (kPa)

GS1 Gear Drive Sprinkler TYPE GS1 GEAR DRIVE SPRINKLER

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

17015

5

1

4.4

Specifications DIMENSIONS ASSEMBLED LENGTH HEIGHT WIDTH WEIGHT (approx)

270 104 240 480

mm mm mm g

BASE/CONNECTION TYPE Inlet: SNAP-ON

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

3.5


Micro Mate™ Tapered Emitters ®

Tapered “push-in” base for easy installation and maintenance. Compatible with the range of Antelco tapered fittings. Effective performance at low pressure (100 kPa).

Features • Press fit taper connection for fast, easy installation. • Vari-Jet™ and Vari-Rotor Spray™ can be adjusted to change flows and coverage. • Asta® Micro Mate™ Stake assemblies for fast and efficient installation. • Suitable for Antelco’s range of tapered fittings. • UV stabilised materials for long life.

Applications Commercial, horticultural, landscaped gardens, nursery, and greenhouse low pressure (100 kPa) irrigation systems.

Micro Mate™ Drippers Taper #6

TAPERED

TYPE

Shrubbler® Taper # 6

SHRUBBLER® 360° SHRUBBLER® 180° MINI BUBBLER 360°

ORDER CODE 31435 31235 31735

PACK PACKS PER QUANTITY CARTON 100 100 100

15.3 15.3 14.8

Micro Mate™ Sprays Taper #6 Mini Bubbler Taper # 6

Spectrum™ Taper #6

Asta® Micro Mate™ Stake Assembly

Micro Spray Jet Taper # 6

TYPE SPECTRUM™ 360° Taper # 6 MICRO SPRAY JET 360° x 18 Red Cap/Blue Base MICRO SPRAY JET 180° fan Blue Cap/Blue Base MICRO SPRAY JET 90° fan Black Cap/Blue Base MICRO SPRAY JET Strip Spray 2 x 20° Black Cap/Blue Base MICRO SPRAY JET 360° x 18 Black Cap/Green Base MICRO SPRAY JET 180° fan Black Cap/Green Base MICRO SPRAY JET 90° fan Black Cap/Green Base VARI-JET™ 360° x 18 Black Cap/Black Base VARI-JET™ 180° Black Cap/Black Base VARI-JET™ 90° Black Cap/Black Base

ROTOR SPRAY™ 1.0 mm Blue Base ROTOR SPRAY™ 1.3 mm Green Base INVERTED ROTOR SPRAY™ 1.0 mm Blue Base INVERTED ROTOR SPRAY™ 1.3 mm Green Base VARI-ROTOR SPRAY™ 1.5 mm Black Base

Vari-Rotor Spray™ Taper # 6

ORDER CODE 32035 18945 18925 18115 18815 18435 18235 18135 13175 13165 13155

PACK PACKS PER QUANTITY CARTON 50 100 100 100 100 100 100 100 50 50 50

100 220 220 220 220 220 220 220 80 80 80

CARTON (kg) 14.6 19.3 19.3 19.3 19.3 19.3 19.3 19.3 12.2 12.2 12.2

Micro Mate™ Sprinklers Taper #6 TYPE

ORDER CODE 20715 20735 20815 20835 20215

PACK PACKS PER QUANTITY CARTON 50 50 50 50 25

110 110 110 110 88

CARTON (kg) 13.1 13.1 13.1 13.1 10.1

Asta® Micro Mate™ Stake Assemblies Taper #6 TYPE JET ASSEMBLY 360° Red Cap/Blue Base JET ASSEMBLY 180° Blue Cap/Blue Base JET ASSEMBLY 90° Black Cap/Blue Base VARI-JET™ ASSEMBLY 360° Black Cap/Black Base VARI-JET™ ASSEMBLY 180° Black Cap/Black Base VARI-JET™ ASSEMBLY 90° Black Cap/Black Base ASTA® MICRO MATE™ Stake Assembly (F) x Vertical Entry

ORDER CODE 14065 14055 14045 14025 14015 14005 43675

PACK PACKS PER QUANTITY CARTON 25 25 25 25 25 25 25

Rotor Spray™ Taper # 6 Asta Micro Mate™ Stake Assembly (no emitter) ®

4.0

65 65 65

CARTON (kg)

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

19 19 19 16 16 16 19

CARTON (kg) 13.7 13.7 13.7 12.5 12.5 12.5 13.2


Micro Mate™ Tapered Fittings ®

Micro Mate™ tapered fittings for easy installation and servicing. Offer a simple way to alter the system to meet changing plant requirements.

Features • Press fit taper connection for fast, easy installation. • Suitable for Antelco’s range of tapered emitters. • UV stabilised materials for long life.

Applications Commercial, horticultural, landscape, nursery, home gardens and greenhouse low pressure (100 kPa) irrigation systems.

Micro Mate™ Fittings TYPE

Joiner Taper

Tee Taper (F)

Elbow Taper (F) x Taper (M)

JOINER 4.5 mm barb (taper series) JOINER Taper # 6 (M) TEE Taper # 6 (F) ELBOW Taper # 6 (F) x Taper # 6 (M) PLUG Taper # 6 (M) ADAPTOR 1/2” NPTF Thread x Taper # 6 (F) ADAPTOR 3/8” BSWM Thread x Taper # 6 (F) ADAPTOR 4.5 mm barb x Taper # 6 (M) ADAPTOR 4.5 mm barb x Taper # 6 (F) STAKE ADAPTOR Taper # 6 (F) x Horizontal Entry STAKE ADAPTOR Taper # 6 (F) x Vertical Entry TUBE ASSEMBLY 300 mm off-take tube Taper # 6 (M) TUBE ASSEMBLY 600 mm off-take tube Taper # 6 (M) ASTA® MICRO MATE™ STAKE

40175 40185 40365 40265 42335 41045 41055 40975 40985 41405 41415 43655 43665 43625

PACK PACKS PER QUANTITY CARTON 100 100 50 50 100 25 100 100 100 50 50 25 25 25

280 240 135 240 350 75 130 240 120 120 130 55 26 38

CARTON (kg) 13.9 15.1 15.6 17.1 17.1 12.6 13.8 13.2 14.2 15.4 16.3 10.5 8.9 15.3

TAPERED

Joiner Barb

ORDER CODE

Plug Taper Adapter 1/2” NPTF Thread x Taper (F) Asta® Micro Mate™ Stake

Adaptor Barb x Taper (F)

Stake Adaptor™ Horizontal Entry

Tube Assembly with Joiner & Adaptor

Adaptor Barb x Taper (M)

Stake Adaptor™ Vertical Entry

Adaptor 3/8” BSWM Thread x Taper (F)

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

4.1


Micro Fittings ®

Essential components in low pressure micro irrigation systems. Used in conjunction with standard low pressure tubing.

Features • Micro fittings with single barb or ‘Quick’ thread connection. • Key Punch™ makes 3 mm hole in tubing. Hexagonal base to install and remove spray jets and interchange their caps. • Pocket Punch makes 3 mm hole in 13 mm PE tubing, installs and removes emitters. • Punch ‘n’ Cut makes 3 mm or 4.5 mm hole into a range of PE tubing sizes, installs and removes emitters, and cuts PE tubing.

Applications Home gardens, landscaping, glasshouses and hanging baskets.

FITTINGS

Adaptors and Joiners

Adaptor 4 mm (F) x 1/2” FNPT thread

Adaptor barb x thread

Adaptor 4 mm (F) x 1/2” MNPT

TYPE

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

ADAPTOR 4.0 mm (F) x 1/2” FNPT thread ADAPTOR 4.0 mm (F) x 1/2” MNPT thread ADAPTOR 4.0 mm (F) x 3/8” BSWM thread

41015 41075 41025

25 25 100

80 TBA 130

7.6 TBA 10.6

ADAPTOR 4.0 mm ‘Quick’ thread x thread ADAPTOR 4.0 mm barb x thread ADAPTOR 4.5 mm barb x thread

40925 40945 40995

100 100 100

260 280 250

14.4 15.6 15.3

JOINER JOINER JOINER

40145 40195 40935

100 100 100

245 240 245

14.0 17.0 14.0

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

ELBOW 4.0 mm barb ELBOW 4.5 mm barb

40245 40295

50 50

490 420

14.0 13.5

TEE TEE

4.0 mm barb 4.5 mm barb

40345 40395

50 50

315 300

11.8 13.0

CROSS 4.0 mm barb CROSS 4.5 mm barb

40445 40495

50 50

240 220

11.1 12.1

TYPE

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

GOOF PLUGS (rack of 10)

42325

10

250

7.2

PART NUMBER

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

42315 50048 51098

25 TBA TBA

50 TBA TBA

12.1 TBA TBA

4.0 mm barb 4.5 mm barb 4.0 mm barb x barb hypodermic

CARTON (kg)

Adaptor 4 mm (F) x 3/8” BSWM thread

Elbows, Tees & Crosses Adaptor ‘Quick’ thread

TYPE Joiner barb x barb hypodermic

Joiner

CARTON (kg)

Tee

Goof Plugs Cross

Elbow

Punches Goof Plugs (rack of 10)

Key Punch™

TYPE KEY PUNCH™ POCKET PUNCH PUNCH ‘n’ Cut

Pocket Punch

Punch ‘n’ Cut

5.0

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com


Take-Off Fittings ®

Antelco Take-Off Fittings are an improved method of connecting low pressure irrigation tubes and driplines to polyethylene tubes and PVC mainlines.

Features • Easy to install, reducing both time and cost of installation. • Innovative Xpando® (Registered Design) Take-Off Adaptor with collapsible barb prevents pull-out and reduces grommet damage during the installation process. • Capo® Top Hat Grommet with internal step combines with Xpando® interference barb to hold off-take firmly in place. • UV stabilised materials for long life.

Applications Agricultural, horticultural, vineyard and landscape applications.

Xpando® Take-Off Adaptors TYPE 13 13 13 16 16 19 19 19

mm mm mm mm mm mm mm mm

inlet inlet inlet inlet inlet inlet inlet inlet

x x x x x x x x

13 14 15 16 18 19 21 25

mm mm mm mm mm mm mm mm

take-off take-off take-off take-off take-off take-off take-off take-off

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

45605 45595 45615 45635 45585 45665 45675 45685

25 25 25 25 25 25 25 25

60 60 48 35 32 26 24 18

8.7 9.5 8.2 8.8 8.3 9.4 8.3 8.0

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

45735 45745 45755

100 100 100

40 24 18

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

46405 46415 46425

25 25 25

120 90 100

11.4 12.1 12.4

FITTINGS

Xpando® Take-Off Adaptor

XPANDO ® XPANDO® XPANDO® XPANDO® XPANDO® XPANDO® XPANDO® XPANDO®

ORDER CODE

Capo® Rubber Grommets TYPE

Capo® Rubber Grommet

CAPO ® RUBBER GROMMET 13 mm CAPO® RUBBER GROMMET 16 mm CAPO® RUBBER GROMMET 19 mm

CARTON (kg) 10.6 9.6 10.4

Take-Off Fittings TYPE TAKE-OFF JOINER 10 mm x 13 mm TAKE-OFF ELBOW 10 mm x 13 mm TAKE-OFF ELBOW 8 mm x 13 mm Take-Off Joiner

Installation Instructions - Xpando® Take-Off Fittings TYPE

Take-Off Elbow 10 mm x 13 mm

XPANDO® XPANDO® XPANDO® XPANDO® XPANDO® XPANDO® XPANDO® XPANDO®

13 13 13 16 16 19 19 19

mm mm mm mm mm mm mm mm

inlet inlet inlet inlet inlet inlet inlet inlet

x x x x x x x x

13 14 15 16 18 19 21 25

GROMMET SIZE mm mm mm mm mm mm mm mm

take-off take-off take-off take-off take-off take-off take-off take-off

13 13 13 16 16 19 19 19

mm mm mm mm mm mm mm mm

HOLE SAW SIZE 16 16 16 19 19 22 22 22

mm mm mm mm mm mm mm mm

MINIMUM POLYETHYLENE PVC ID SIZE TUBE ID SIZE 40 40 40 50 50 50 50 50

mm mm mm mm mm mm mm mm

13 14 15 16 18 19 21 25

mm mm mm mm mm mm mm mm

Take-Off Elbow 8 mm x 13 mm

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

5.1


DB Fittings ®

The DB range of purpose designed quality acetal fittings provide high retention in low pressure poly tubing for long-term reliability of connections.

Features • • • • •

Double barb for increased retention. Sharp-edged barbs create leak-proof seal. Increased strength and superior quality. Heat, chemical and wear resistant. UV stabilised materials for long life.

Applications Low pressure micro irrigation systems.

DB Joiners

FITTINGS

TYPE

DB Joiner

DB DB DB DB DB DB DB DB

JOINER JOINER JOINER JOINER JOINER JOINER JOINER JOINER

13 14 15 16 18 19 21 25

mm mm mm mm mm mm mm mm

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

47005 47015 46975 47025 47035 46985 47045 46995

25 25 25 25 25 25 25 25

90 72 64 56 50 40 34 20

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

47075 47085 47055 47125 47155 47065 47105 47135 47145 47175 47195 46965

25 25 25 25 25 25 25 25 25 25 25 25

60 56 TBA 50 40 32 32 28 28 26 26 24

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

47205 47215 47375 47225 47235 47265 47245 47255

25 25 25 25 25 25 25 25

75 54 50 42 36 32 24 12

10.9 9.8 9.6 8.9 9.2 8.7 7.9 6.7

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

47275 47305 47325

25 25 25

48 40 34

9.5 9.4 8.9

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

48035 48015 48025 48045

25 25 25 25

TBA 56 50 TBA

TBA 11.5 10.6 TBA

11.0 10.2 10.2 9.5 9.8 8.8 8.6 7.2

DB Reducing Joiners TYPE

DB Reducing Joiner

DB DB DB DB DB DB DB DB DB DB DB DB

REDUCING REDUCING REDUCING REDUCING REDUCING REDUCING REDUCING REDUCING REDUCING REDUCING REDUCING REDUCING

JOINER JOINER JOINER JOINER JOINER JOINER JOINER JOINER JOINER JOINER JOINER JOINER

16 18 19 19 19 25 25 25 25 25 25 25

mm mm mm mm mm mm mm mm mm mm mm mm

x x x x x x x x x x x x

14 14 13 15 18 13 14 15 16 18 19 21

mm mm mm mm mm mm mm mm mm mm mm mm

CARTON (kg) 9.7 10.2 TBA 9.9 8.5 8.7 8.6 8.0 8.1 7.8 7.9 7.7

DB Elbows TYPE DB Elbow

DB DB DB DB DB DB DB DB

ELBOW ELBOW ELBOW ELBOW ELBOW ELBOW ELBOW ELBOW

13 14 15 16 18 19 21 25

mm mm mm mm mm mm mm mm

CARTON (kg)

DB Reducing Elbows TYPE

DB Reducing Elbow

DB REDUCING ELBOW 16 mm x 14 mm DB REDUCING ELBOW 19 mm x 15 mm DB REDUCING ELBOW 19 mm x 18 mm

DB Director 1/2” MNPT TYPE

DB Director 1/2” MNPT

5.2

DB DB DB DB

DIRECTOR DIRECTOR DIRECTOR DIRECTOR

13 14 15 16

mm mm mm mm

X X X X

1/2” 1/2” 1/2” 1/2”

MNPT MNPT MNPT MNPT

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com


DB Fittings ®

The DB range can be confidently installed without clamps when matched to quality low pressure poly tubing with corresponding dimensions (refer to the tubing manufacturer for confirmation of suitability or test under field conditions). Operating pressures should not exceed 300 kPa.

Size Options: 13 14 15 16 18 19 21 25

mm mm mm mm mm mm mm mm

-

Suits Suits Suits Suits Suits Suits Suits Suits

nominal nominal nominal nominal nominal nominal nominal nominal

13 14 15 16 18 19 21 25

mm mm mm mm mm mm mm mm

I.D. I.D. I.D. I.D. I.D. I.D. I.D. I.D.

tube and 16 and 17 and 18 and 20 tube and 23 tube

mm mm mm mm

O.D. O.D. O.D. O.D.

tube tube tube tube

mm O.D. tube

DB Tees TYPE TEE TEE TEE TEE TEE TEE TEE TEE

13 14 15 16 18 19 21 25

mm mm mm mm mm mm mm mm

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

47405 47415 47395 47425 47435 47605 47445 47455

25 25 25 25 25 25 25 25

48 30 28 24 22 18 16 10

10.3 8.1 7.9 7.5 8.1 7.1 7.7 6.8

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

47475 47485 47505 47525

25 25 25 25

26 26 26 26

7.6 8.2 8.6 7.6

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

47765 47465 47535 47755 47585 47695

25 25 25 25 25 25

TBA 48 TBA TBA TBA TBA

TBA 9.4 TBA TBA TBA TBA

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

47615 47625 47635 47665 47645

25 25 25 25 25

100 72 60 56 40

11.7 10.2 9.9 10.3 8.4

DB Tee

FITTINGS

DB DB DB DB DB DB DB DB

ORDER CODE

DB Increasing Tees TYPE DB INCREASING TEE 14 mm line x 16 mm branch DB INCREASING TEE 14 mm line x 19 mm branch DB INCREASING TEE 15 mm line x 19 mm branch DB INCREASING TEE 18 mm line x 19 mm branch

DB Reducing Tees TYPE

DB Increasing Tee

DB REDUCING TEE 13 mm line x 4 mm branch DB REDUCING TEE 14 mm line x 4 mm branch DB REDUCING TEE 19 mm line x 13 mm branch DB REDUCING TEE 19 mm line x 14 mm branch DB REDUCING TEE 25 mm line x 13 mm branch DB REDUCING TEE 25 mm line x 14 mm branch

DB End Plugs TYPE

DB Reducing Tee

DB DB DB DB DB

END PLUG 14 mm END PLUG 16 mm END PLUG 18 mm END PLUG 19 mm END PLUG 21 mm

Product Code Selection Guide TUBE SIZE

DB End Plug

13 14 15 16 18 19 21 25

mm mm mm mm mm mm mm mm

I.D. I.D. I.D. I.D. I.D. I.D. I.D. I.D.

tube tube tube tube tube tube tube tube

JOINER

ELBOW

TEE

END PLUG

RATCHET CLAMP

GREEN BACK VALVE

47005 47015 46975 47025 47035 46985 47045 46995

47205 47215 47375 47225 47235 47265 47245 47255

47405 47415 47395 47425 47435 47605 47445 47455

47615 47625 47635 47665 47645 -

44305 44345 44345 44335 44295 44315 44285 44325

45505 45575 45555 45515 45565 45525 45535 45545

* Refer to tubing manufacturer for conformation of suitability or test under field conditions * Refer to page 5.5 & 5.8 for Ratchet Clamp & Green Back® Valve info

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

5.3


Joiners, Elbows & Tees ®

A range of polypropylene fittings designed to control, disperse, slow and divert water through a low pressure irrigation system. Used in conjunction with low pressure poly tubing.

Features • Tapered entry on all barbed fittings for ease of installation. • Range includes common Australian and International tube sizes. • UV stabilised materials for long life.

Applications Home gardens, landscaping and professionally installed irrigation systems.

Joiners

FITTINGS

TYPE

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

44705 46005 46015 44715 46025 44735

25 25 25 25 25 25

90 60 50 40 36 20

6.9 6.6 7.1 6.1 5.9 6.3

46055 44805 46065 46075 46085 44765 44775

25 25 25 25 25 25 25

60 50 50 44 40 32 26

7.2 6.2 6.6 6.3 5.9 6.8 5.9

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

ELBOW 13 mm ELBOW 19 mm ELBOW 25 mm

44835 44865 44875

25 25 25

75 36 14

6.6 5.6 5.8

THREADED ELBOW 13 x 1/2” BSPF THREADED ELBOW 19 x 1/2” BSPF THREADED ELBOW 25 x 1/2” BSPF

44955 44965 44975

25 25 25

28 24 16

8.5 7.7 6.7

THREADED THREADED THREADED THREADED THREADED

44885 44905 44915 44925 44935

25 25 25 25 25

34 36 25 17 14

6.4 5.8 5.6 6.2 6.2

THREADED CORNER ELBOW 19 mm x 1/2” BSPM

45005

25

16

8.7

REDUCING REDUCING REDUCING REDUCING

46155 46165 46175 46185

25 25 25 25

50 36 35 30

7.3 6.0 6.3 5.9

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

45035 45065 45075

25 25 25

48 22 8

6.3 5.3 4.9

45105 46255 45115 45125

25 25 25 25

24 18 11 10

5.2 5.4 5.3 5.3

THREADED TEE 13 mm line x 1/2” BSPF branch THREADED TEE 19 mm line x 1/2” BSPF branch THREADED TEE 25 mm line x 1/2” BSPF branch

45155 45165 45175

25 25 25

18 15 10

6.9 6.3 5.8

THREADED THREADED THREADED THREADED THREADED

45185 45205 45215 45225 45235

25 25 25 25 25

25 22 16 10 9

6.5 5.2 4.6 5.4 5.4

46305 46315 46325

25 25 25

27 24 20

7.1 5.8 5.5

JOINER JOINER JOINER JOINER JOINER JOINER

Joiner

Reducing Joiner

13 15 18 19 21 25

mm mm mm mm mm mm

REDUCING REDUCING REDUCING REDUCING REDUCING REDUCING REDUCING

JOINER JOINER JOINER JOINER JOINER JOINER JOINER

16 19 19 19 21 25 25

mm mm mm mm mm mm mm

x x x x x x x

15 13 15 18 19 13 19

mm mm mm mm mm mm mm

CARTON (kg)

Elbows TYPE

Elbow

Threaded Elbow Male

ELBOW ELBOW ELBOW ELBOW ELBOW ELBOW ELBOW ELBOW ELBOW

13 19 19 25 25 16 19 19 21

x x x x x x x x x

1/2” 1/2” 3/4” 1/2” 3/4” 15 15 18 19

BSPM BSPM BSPM BSPM BSPM

mm mm mm mm

CARTON (kg)

Tees TYPE TEE 13 mm TEE 19 mm TEE 25 mm REDUCING REDUCING REDUCING REDUCING

Tee

Threaded Tee Male

5.4

TEE TEE TEE TEE

TEE TEE TEE TEE TEE

19 21 25 25

13 19 19 25 25

mm mm mm mm

mm mm mm mm mm

line line line line

line line line line line

x x x x

x x x x x

13 19 13 19

mm mm mm mm

1/2” 1/2” 3/4” 1/2” 3/4”

branch branch branch branch

BSPM BSPM BSPM BSPM BSPM

branch branch branch branch branch

INCREASING TEE 15 mm line x 16 mm branch INCREASING TEE 15 mm line x 19 mm branch INCREASING TEE 18 mm line x 19 mm branch

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

CARTON (kg)


Directors, Clamps, End Plugs & Saddles ®

Used with polyethylene tubing in low pressure irrigation systems.

Features • • • • •

Directors adapt tubes to valves and female fittings. Ratchet Clamps with smooth edge require no tools for installation. Compatible with Australian and International tube sizes. Operating pressure range up to 300 kPa. UV stabilised materials for long life.

Applications Ratchet Clamps secure polyethylene tube to a wide range of fittings. End Plugs terminate irrigation supply. Saddles and Clips secure irrigation tubes.

Directors ORDER CODE

PACK QUANTITY

PACKS PER CARTON

1/2” BSPM 3/4” BSPM 1” BSPM 1/2” BSPM 3/4” BSPM 1” BSPM 3/4” BSPM 1” BSPM

45255 45265 45275 45285 45295 45305 45325 45315

25 25 25 25 25 25 25 25

45 35 20 40 30 18 23 15

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

44305 44345 44335 44295 44315 44285 44325

100 100 100 100 100 100 100

50 45 45 40 35 32 16

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

END PLUG 13 mm END PLUG 19 mm END PLUG 25 mm

44555 44565 44575

25 25 25

110 50 24

7.2 7.0 7.0

END SLEEVE 13 mm

44605

25

40

5.4

CROSS 13 mm

44635

25

26

4.2

TYPE

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

4 mm with nail 13 mm with nail

45355 45365

100 100

170 56

18.2 18.7

45395 45405 45415

100 100 100

90 45 26

9.3 7.2 6.6

DIRECTOR DIRECTOR DIRECTOR DIRECTOR DIRECTOR DIRECTOR DIRECTOR DIRECTOR

13 13 13 19 19 19 25 25

mm mm mm mm mm mm mm mm

x x x x x x x x

CARTON (kg) 6.5 6.9 6.9 6.8 6.7 6.7 7.0 6.2

FITTINGS

Director

TYPE

Ratchet Clamp

Ratchet Clamps TYPE

End Plug

RATCHET RATCHET RATCHET RATCHET RATCHET RATCHET RATCHET

CLAMP CLAMP CLAMP CLAMP CLAMP CLAMP CLAMP

#15 #17 #18 #20 #22 #23 #28

(tube (tube (tube (tube (tube (tube (tube

OD OD OD OD OD OD OD

15 16 17 19 21 22 27

mm mm mm mm mm mm mm

-

16 18 19 21 23 24 30

mm) mm) mm) mm) mm) mm) mm)

CARTON (kg) 12.4 11.2 11.2 11.1 10.6 10.6 10.0

End Sleeve

End Plugs, End Sleeve & Cross TYPE

Cross 13 mm

CARTON (kg)

Saddle Clips & Saddle Clamps

Saddle Clip

SADDLE CLIP SADDLE CLIP

SADDLE CLAMP 4 mm SADDLE CLAMP 13 mm SADDLE CLAMP 19 mm

Saddle Clamp

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

5.5


Tap Fittings ®

A range of quick connect fittings specifically to adapt polyethylene irrigation tubes to snap-on fittings. Connect to tap adaptors, tap timers, manifold and multi outlet distributors.

Features • • • •

Simple to use ergonomic design. UV35+ ‘O’-Ring™ silicone to resist ultra violet degradation. Tap Adaptor suits snap-on connections. UV stabilised materials for long life.

Applications Home gardens and landscaping applications.

Snap-On Tap Adaptors

FITTINGS

TYPE

Tap Adaptor Reducing Bush

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

SNAP-ON TAP ADAPTOR 3/4” BSPF SNAP-ON TAP ADAPTOR 1” BSPF

45775 45785

25 25

38 30

10.0 9.8

TAP ADAPTOR Reducing Bush 1” BSPM x 3/4” BSPF

45815

25

44

9.3

TYPE

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

x x x x

45465 45475 45485 44455

25 25 25 25

35 32 28 25

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

45455

25

100

8.9

TYPE

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

WASHER suits 3/4” Nut & Tail, Snap-On Tap Adaptor WASHER suits 1” Nut & Tail, Snap-On Tap Adaptor

44075 44085

100 100

115 70

9.5 8.7

UV35+ ‘O’-Ring™

45865

100

300

10.7

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

44005 44065 44055 44015 44025 44035 44045

25 25 25 25 25 25 25

32 32 34 30 27 23 18

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

44505 44515

25 25

50 36

Snap-On Connectors

SNAP-ON SNAP-ON SNAP-ON SNAP-ON Snap-On Tap Adaptor

CONNECTOR CONNECTOR CONNECTOR CONNECTOR

13 mm barb 16 mm barb 19 mm barb 3/4” BSPF

12.2 12.0 10.9 12.9

Snap-On Joiner TYPE SNAP-ON JOINER x 13 mm barb

Washers & UV35+ ‘O’-Ring™

Snap-On Connector Barb

Snap-On Connector Thread 3/4”

Nuts and Tails TYPE

Snap-On Joiner

UV35+ ‘O’-Ring™

NUT NUT NUT NUT NUT NUT NUT

AND AND AND AND AND AND AND

TAIL TAIL TAIL TAIL TAIL TAIL TAIL

with with with with with with with

Washer Washer Washer Washer Washer Washer Washer

3/4” BSPF x 13 mm 3/4” BSPF x 14 mm 3/4” BSPF x 16 mm 3/4” BSPF x 19 mm 1” BSPF x 13 mm 1” BSPF x 19 mm 1” BSPF x 25 mm

CARTON (kg) 9.5 9.5 10.9 9.4 10.3 9.6 9.0

Washer

Blank Nuts TYPE BLANK NUT 3/4” BSPF with washer BLANK NUT 1” BSPF with washer

Nut and Tail

5.6

Blank Nut Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

CARTON (kg) 10.6 10.3


Filters ®

Filtration device designed to trap foreign particles in the water and reduce clogging of emitters.

Features • • • • •

In-Line model with single barb inlet and outlet. Snap-On model for direct connection to standard tap adaptors. 80 mesh screen filter. Easily taken apart for cleaning. Effective compact filter with minimal flow loss.

Applications For low pressure (up to 300 kPa) micro irrigation systems.

In-Line Filters: 80 Mesh Screen TYPE FILTER FILTER FILTER FILTER

13 14 16 19

mm mm mm mm

PACK QUANTITY

PACKS PER CARTON

44355 44395 44365 44375

25 25 25 25

14 14 12 6

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

44405 44435 44415 44425

25 25 25 25

10 10 8 6

barb barb barb barb

CARTON (kg) 10.9 10.2 9.9 7.4

Snap-On Filters: 80 Mesh Screen TYPE SNAP-ON SNAP-ON SNAP-ON SNAP-ON

FILTER FILTER FILTER FILTER

13 14 16 19

mm mm mm mm

barb barb barb barb

CARTON (kg)

FITTINGS

IN-LINE IN-LINE IN-LINE IN-LINE

ORDER CODE

9.5 9.5 9.7 8.5

In-Line Filter

Snap-On Filter

Pressure Loss (kPa)

Pressure Loss: 13 mm and 16 mm Filter 40 30 20

• 13 mm

10

• 16 mm 0

200

400

600

800

1000

Flow Rate (lph)

Pressure Loss (kPa)

Pressure Loss: 19 mm Filter 40 30 20

• 19 mm

10 0

600

1200

1800

2400

3000

Flow Rate (lph)

Specifications: In-Line Filter DIMENSIONS ASSEMBLED

In-Line Filter screen detail

LENGTH WIDTH WEIGHT (approx)

13,14, 16 mm

19 mm

132 mm 175 mm 33 mm 40 mm 28 g 43 g

MATERIAL TAIL Inlet: BODY Filter & NUT: WASHER: SCREEN:

BASE/CONNECTION TYPE

acetal polyprop. rubber HDPE

Inlet: BARB 13, 14, 16 or 19 mm Outlet: BARB 13, 14, 16 or 19 mm

Specifications: Snap-On Filter DIMENSIONS ASSEMBLED

This product has been independently tested by the Australian Irrigation Technology Centre, report No A98052 and A00007.

LENGTH WIDTH WEIGHT (approx)

13,14, 16 mm

19 mm

MATERIAL

134 mm 175 mm BODY Snap-On Inlet: 33 mm 40 mm BODY Filter & SLEEVE Snap-On: 35 g 51 g WASHER: SCREEN:

BASE/CONNECTION TYPE acetal polyprop. Inlet: SNAP-ON CONNECTOR rubber Outlet: BARB 13, 14, 16 or 19 mm HDPE

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

5.7


Valves ®

On-off device to control the water flow in low pressure irrigation systems.

Features • • • • •

Simple on-off operation and straight through flow. Operating pressure range up to 300 kPa. Green Back® cap for standard irrigation applications. Purple Back® cap for recycled water applications. UV stabilised materials for long life.

Applications Secondary zone water diversion and flow control. Always install as an in-line valve with tubes connected to both inlet and outlet.

Vari-Flow™ Valve

FITTINGS

TYPE VARI-FLOW™ VALVE barb x barb 4.5 mm VARI-FLOW™ VALVE thread x thread 4.0 mm VARI-FLOW™ VALVE thread x thread 4.0 mm

COLOUR

ORDER CODE

Black Black Green/Yellow

42155 42115 42125

PACK PACKS PER QUANTITY CARTON 50 50 50

CARTON (kg)

90 90 90

11.5 11.5 11.5

Green Back® Valve Vari-Flow™ thread x thread

TYPE GREEN GREEN GREEN GREEN GREEN GREEN GREEN GREEN

BACK® VALVE BACK® VALVE BACK® VALVE BACK® VALVE BACK® VALVE BACK® VALVE BACK® VALVE BACK® VALVE

13 14 15 16 18 19 20 25

mm mm mm mm mm mm mm mm

(Shank (Shank (Shank (Shank (Shank (Shank (Shank (Shank

OD OD OD OD OD OD OD OD

12.6 14.0 14.6 15.7 17.6 19.0 20.5 25.0

mm) mm) mm) mm) mm) mm) mm) mm)

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

45505 45575 45555 45515 45565 45525 45535 45545

20 20 20 20 20 20 20 20

25 25 25 24 10 10 10 4

9.4 9.6 9.5 9.9 8.9 8.7 9.3 7.1

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

46505 46575 46555 46515 46565 46525 46535 46545

20 20 20 20 20 20 20 20

25 25 25 24 10 10 10 4

9.4 9.6 9.5 9.9 8.9 8.7 9.3 7.1

Purple Back® Valve TYPE Vari-Flow™ barb x barb

PURPLE PURPLE PURPLE PURPLE PURPLE PURPLE PURPLE PURPLE

BACK® VALVE BACK® VALVE BACK® VALVE BACK® VALVE BACK® VALVE BACK® VALVE BACK® VALVE BACK® VALVE

13 14 15 16 18 19 20 25

mm mm mm mm mm mm mm mm

(Shank (Shank (Shank (Shank (Shank (Shank (Shank (Shank

OD OD OD OD OD OD OD OD

12.6 14.0 14.6 15.7 17.6 19.0 20.5 25.0

mm) mm) mm) mm) mm) mm) mm) mm)

Specifications: Vari-Flow™ Valve

Green Back® Valve

DIMENSIONS ASSEMBLED

4.5 mm

4.0 mm

HEIGHT LENGTH WIDTH WEIGHT (approx)

21 mm 40 mm 15 mm 2.5 g

21 mm 40 mm 15 mm 2.5 g

UV STABILISED MATERIALS BASE/CONNECTION TYPE

BODY acetal KNOB HDPE

BODY acetal KNOB HDPE

BARB 4.5 mm

10-32 UNF THREAD 4 mm

Specifications: Green Back® Valve and Purple Back® Valve DIMENSIONS ASSEMBLED HEIGHT LENGTH WIDTH WEIGHT (approx) Purple Back® Valve

UV STABILISED MATERIALS

BASE/CONNECTION TYPE

5.8

13 mm, 14 mm 15 mm, 16 mm 40 81 28 18

mm mm mm g

18 mm, 19 mm 20 mm

25 mm

54 mm 100 mm 40 mm 41 g

71 mm 124 mm 53 mm 81 g

BODY acetal STEM HDPE COVER acetal

BODY acetal STEM HDPE COVER acetal

BARB

BARB

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

BODY acetal STEM polypropylene COVER acetal BARB


Valves ®

Threaded flow control valves for low pressure irrigation.

Features • • • • • •

3/4” BSP Male threaded inlet or 1/2” MNPT threaded inlet. Simple on-off operation and straight through flow. Operating pressure range up to 300 kPa. Green Back® cap for standard irrigation applications. Purple Back® cap for recycled water applications. UV stabilised materials for long life.

Applications Irrigation from rain tanks, non-pressurised containers or where 1/2” MNPT or 3/4” BSPM threaded connection is required.

Threaded Green Back Valve 1/2” MNPT ®

TYPE BACK® VALVE BACK® VALVE BACK® VALVE BACK® VALVE

13 14 15 16

mm mm mm mm

barb barb barb barb

x x x x

1/2” 1/2” 1/2” 1/2”

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

49005 49015 49025 49035

20 20 20 20

22 22 22 22

9.8 9.9 9.8 10.3

PART NUMBER

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

49105 49115 49125 49135

20 20 20 20

22 22 22 22

9.8 9.9 9.8 10.3

MNPT MNPT MNPT MNPT

Threaded Green Back® Valve 1/2” MNPT

Threaded Purple Back Valve 1/2” MNPT ®

TYPE PURPLE PURPLE PURPLE PURPLE

Threaded Purple Back® Valve 1/2” MNPT

BACK® VALVE BACK® VALVE BACK® VALVE BACK® VALVE

13 14 15 16

mm mm mm mm

barb barb barb barb

x x x x

1/2” 1/2” 1/2” 1/2”

MNPT MNPT MNPT MNPT

FITTINGS

GREEN GREEN GREEN GREEN

PART NUMBER

Threaded Green Back® Valve 3/4” BSPM TYPE GREEN GREEN GREEN GREEN

BACK ® BACK® BACK® BACK®

VALVE VALVE VALVE VALVE

13 14 15 16

mm mm mm mm

barb barb barb barb

x x x x

3/4” 3/4” 3/4” 3/4”

BSPM BSPM BSPM BSPM

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

46605 46675 46655 46615

20 20 20 20

22 22 22 21

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

46705 46775 46755 46715

20 20 20 20

22 22 22 21

CARTON (kg) 10.4 10.6 10.5 10.9

Threaded Purple Back® Valve 3/4” BSPM TYPE Threaded Green Back Valve 3/4” BSPM

®

PURPLE PURPLE PURPLE PURPLE

BACK ® BACK® BACK® BACK®

VALVE VALVE VALVE VALVE

13 14 15 16

mm mm mm mm

barb barb barb barb

x x x x

3/4” 3/4” 3/4” 3/4”

BSPM BSPM BSPM BSPM

CARTON (kg) 10.4 10.6 10.5 10.9

Specifications: Threaded Valves 1/2” MNPT & 3/4” BSPM DIMENSIONS ASSEMBLED

1/2” MNPT

HEIGHT LENGTH WIDTH WEIGHT (APPROX)

41 81 28 21

UV STABILISED MATERIALS

BODY STEM COVER

BASE/CONNECTION TYPE

1/2” MNPT Thread x Barb

Threaded Purple Back® Valve 3/4” BSPM

3/4” BSPM

mm mm mm g

acetal HDPE acetal

44 81 28 22 BODY STEM COVER

mm mm mm g

acetal HDPE acetal

3/4” BSPM Thread x Barb

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

5.9


Stakes ®

Threaded & Barbed Stakes & Adaptors Quality fittings for accurate, secure sprinkler placement.

Features • Three inlet connection adaptors available for use with Jumbo Stake™ and Collar Pipe Stake™. • Collar Pipe Stake™ for use with 26.7 mm OD PVC pipe. • Rod Stake for use with 5 mm OD steel rod. • Stake Adaptor available with 5 mm, 10 mm and 13 mm connections. • UV stabilised materials for long life.

Applications Jumbo Stake™, Collar Pipe Stake™, Stake Adaptors and Rod Stake Adaptor assemblies are all compatible with Rotor Rain® 3/8” based sprinklers; Micro Stake and Jet Stake are suited to Micro Spray and Rotor Spray™ installations.

Jumbo Stake™ Assembly with Adaptor to suit 3/8” BSPM Products

FITTINGS

TYPE JUMBO STAKE™ 5 mm Adaptor JUMBO STAKE™ 10 mm Adaptor JUMBO STAKE™ 13 mm Adaptor

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

40555 40515 40535

170 170 170

1 1 1

6.7 6.7 6.8

Collar Pipe Stake™ Assembly

Collar Pipe Stake™ Assembly with Adaptor to suit 3/8” BSPM Products TYPE COLLAR PIPE STAKE™ 5 mm Adaptor COLLAR PIPE STAKE™ 10 mm Adaptor COLLAR PIPE STAKE™ 13 mm Adaptor

Stake Adaptor

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

40655 40615 40635

50 50 50

10 10 10

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

40755 40715 40735

50 50 50

40 34 34

CARTON (kg) 5.5 6.0 6.2

Stake Adaptor to suit 3/8” BSPM Products TYPE

Rod Stake Adaptor™

Jumbo Stake™ Assembly 320 mm

STAKE ADAPTOR 5 mm x 3/8” BSPF STAKE ADAPTOR 10 mm x 3/8” BSPF STAKE ADAPTOR 13 mm x 3/8” BSPF

CARTON (kg) 6.8 6.7 7.0

Rod Stake Adaptor™ to suit 3/8” BSPM Products Micro Stake 320 mm

Jet Stake 320 mm

TYPE

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

ROD STAKE ADAPTOR™ 5 mm x 3/8” BSPF ROD STAKE ADAPTOR™ 10 mm x 3/8” BSPF

40815 40855

50 50

35 24

CARTON (kg) 7.1 5.7

Jet Stake TYPE

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

40845

200

1

TYPE

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

MICRO STAKE 4 mm entry MICRO STAKE with 400 mm off-take tube MICRO STAKE with 500 mm off-take tube

40825 40835 40784

200 100 25

1 1 4

5.9 4.0 5.4

JET STAKE – accepts Rigid Riser

CARTON (kg) 7.2

Micro Stakes

Micro Stake with 4 mm off-take tube

6.0

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com


Stakes ®

Asta® Stake Registered Design The Asta® Stake range provides a variety of solutions for stabilising the components of micro irrigation systems.

Features • • • •

Asta® Stakes available in 4 height options. Asta® Stakes suitable for plasticised PVC and polyethylene tubing (6.9 mm OD). Asta® Stake Hold-Down locates and secures polyethylene tubing (up to 22 mm OD). Asta® Stake Assemblies suitable for most micro spray and micro sprinkler installations with 4 mm inlets. • UV stabilised materials for long life.

Applications Asta® Stakes for rigid riser stability; Asta® Stake Hold-Down for securing drip and micro irrigation systems; Asta® Stake Assemblies for home gardens and landscape applications. Asta® Stake Hold-Down

Asta® Stakes TYPE STAKE STAKE STAKE STAKE

200 310 420 530

mm mm mm mm

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

40885 40875 40895 40905

25 25 25 25

28 20 12 10

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

43595

25

100

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

43615

25

25

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

41005

100

120

12.4

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

CARTON (kg)

43685 43695

25 25

19 14

ORDER CODE

PACK QUANTITY

PACKS PER CARTON

43125 43135 43145

100 100 100

26 18 11

9.9 10.8 9.1 9.5

FITTINGS

ASTA® ASTA® ASTA® ASTA®

ORDER CODE

Asta® Clip Stake TYPE ASTA® CLIP STAKE

CARTON (kg) 11.5

Asta® Stake Hold-Down

Asta® Clip Stake

TYPE Rigid Riser with ‘Quick’ thread adaptor

Asta® Stake Assemblies

ASTA® STAKE HOLD-DOWN

CARTON (kg) 10.0

Asta® Stake Adaptor

Asta® Stake 530 mm

TYPE

Asta® Stake 420 mm

ASTA® STAKE ADAPTOR 4 mm (F) x 4.5 mm barb

CARTON (kg)

Asta® Stake Assemblies

Asta® Stake 310 mm

TYPE

Asta® Stake 200 mm Asta® Stake Adaptor

ASTA® STAKE ASSEMBLY w/300 mm off-take tube ASTA® STAKE ASSEMBLY w/600 mm off-take tube

9.6 11.0

Rigid Risers TYPE 200 mm with ‘Quick’ thread adaptor fitted 300 mm with ‘Quick’ thread adaptor fitted 450 mm with ‘Quick’ thread adaptor fitted

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

CARTON (kg) 12.6 13.8 12.8

6.1


Australian Conditions of Sale: Antelco Pty Ltd

ABN 50 008 062 708

®

Prices and GST

Returns

Prices set out in the Antelco Australian Bulk Price List are list prices excluding GST. Prices may change without notice and customers may confirm prices at the time of ordering. Antelco tax invoices show GST for each line item, total GST and a final total including GST.

Goods will be accepted for return only if prior approval has been obtained from Antelco Pty Ltd. The goods must be undamaged, unsoiled and in a saleable condition. All returned goods must include a copy of the original invoice and packing slip. Goods that are approved for return after thirty (30) days from the date of delivery are subject to a 15% restocking charge. Freight cost and risk will remain the responsibility of the customer.

Payment and Trading Terms Payment can be made by cash, cheque, VISA or MasterCard, or by bank transfer (contact Antelco Pty Ltd for bank details). Credit customers must pay within thirty (30) days of the end of the month appearing on the invoice, or otherwise as agreed in writing.

Orders

APPENDIX

Orders should be faxed or e-mailed to Antelco Head Office, Murray Bridge, South Australia. Customers may contact the Antelco Sales Department with special orders. They will be advised whether their order can be satisfied, together with pricing and anticipated delivery time. A minimum order handling fee of $20.00 (GST inclusive) will apply to orders with a total value of goods of less than $120.00 (GST inclusive).

Urgent (Air Cargo) Orders Orders for shipment by air must be received before 10.00 am to be despatched the same day, and charges will apply. Airbags are best restricted to three or five kilograms.

Freight and Insurance All prices are ex works Murray Bridge South Australia. Delivery from Antelco Murray Bridge is at the customer’s expense. Goods are despatched uninsured and at customers risk. Customers acknowledge that delivery insurance is their responsibility.

Receipt of Goods Ordered goods should be opened promptly on receipt and checked against the enclosed packing slip. If correct, the consignment note should be signed. If any item is missing and not marked as being “back ordered”, immediately advise Antelco.

Back Orders Back orders are treated as new orders. Back orders are invoiced when they are despatched. Customers should advise Antelco if they do not want any items back ordered or if they want back orders cancelled. Antelco will cancel a back order if it has not been despatched.

Shortages or Damaged Goods Claims for shortages or errors on orders despatched will not be recognized after seven (7) days from the date of delivery. If goods are received damaged or the delivery is incomplete as per the packing slip, record details on the delivery note and advise the carrier and Antelco Pty Ltd immediately.

Force Majeure If by reason of any fact, circumstance, matter or thing beyond its reasonable control, Antelco Pty Ltd is unable to perform in whole or in part any obligation under these Conditions of Sale then Antelco Pty Ltd is relieved of that obligation to the extent and for the period that it is so unable to perform and is not liable to the customer in respect of such inability.

Product Design Antelco Pty Ltd reserves the right to re-design its products and thereby cause changes to the specifications, without notice and without incurring any liability.

Compatibility Antelco Pty Ltd is a manufacturer of irrigation products which are designed for use in low pressure systems where the operating pressure at the product does not exceed 300 kPa. Decisions on the use of Antelco products in any other situation remain the responsibility of the customer. If there is uncertainty as to the particular use of the product, the customer or end-user should test its suitability for that application.

Risk and Title Risk of loss or damage to the goods, passes to the customer at the time of despatch from the Antelco Pty Ltd warehouse. Notwithstanding that the risk of the goods may pass to the customer, Antelco Pty Ltd retains all legal and equitable rights of ownership of the goods until payment has been made in full (including interest and any other charges associated with the supply of the goods). The customer shall store and protect the goods separately to identify them as the property of Antelco Pty Ltd until paid in full. The customer may sell the goods in the ordinary course of business, but any monies received for the sale of the goods must be held for the benefit of Antelco Pty Ltd. If the customer fails to pay the debt, Antelco Pty Ltd reserves the right to enter the premises where the goods are located, seize the goods in which ownership has not passed, and sell them to recover the amount of debt owed, without being liable for damages.

Limit of Liability In the event of a breach of these Conditions of Sale or of any implied warranties, whether statutory or otherwise, or arising out of or in relation to the sale of Antelco products, Antelco’s liability is limited to the repair or replacement of defective goods. In no event will such a breach give rise to any liability for punitive damages, loss of profits or expected future business, damage to reputation or goodwill, loss of any order or contract or any consequential or indirect loss or damage arising from any cause whatsoever.

Warranty In addition to any statutory warranty and subject to these Conditions of Sale, Antelco Pty Ltd warrants that its products are of merchantable quality, free from defects or faults, and are fit for the purpose for which they were manufactured or supplied. At its option and in its sole discretion, Antelco Pty Ltd will repair or replace goods found to be defective in workmanship or materials within twelve (12) months of the date of purchase. The customer will be responsible for delivering products to be repaired to Antelco Pty Ltd.

Applicable Law All matters for determination between Antelco Pty Ltd and the customer shall be determined by a court of competent jurisdiction in the State of South Australia according to the laws of South Australia.

7.0

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com


Export Conditions of Sale: Antelco Pty Ltd

ABN 50 008 062 708

®

Prices

Product Design

All prices set out in the Antelco Export Price List are in Australian dollars and are ex works, Murray Bridge, South Australia, Australia. Prices may change without notice and customers may confirm prices at the time of ordering.

Antelco Pty Ltd reserves the right to re-design its products and thereby cause changes to the specifications, without notice and without incurring any liability.

Payment Payment is required prior to despatch and may be made by VISA or MasterCard or by electronic funds transfer (contact Antelco Pty Ltd for bank details). Any fees and charges associated with the payment method are to be borne by the customer.

Orders Orders should be faxed or e-mailed to Antelco Head Office, Murray Bridge, South Australia.

Compatibility Antelco Pty Ltd is a manufacturer of irrigation products which are designed for use in low pressure systems where the operating pressure at the product does not exceed 300 kPa. Decisions on the use of Antelco products in any other situation remain the responsibility of the customer. If there is uncertainty as to the particular use of the product, the customer or end-user should test its suitability for that application.

Risk and Title

Packaging

Limit of Liability

All goods are packaged in export cartons in accordance with Antelco standard practice.

Claims for shortages or errors on orders despatched will not be recognized after seven (7) days from the date of delivery. If goods are received damaged or the delivery is incomplete as per the packing slip, record details on the delivery note and advise the carrier and Antelco Pty Ltd immediately.

In the event of a breach of these Conditions of Sale or of any implied warranties, whether statutory or otherwise, or arising out of or in relation to the sale of Antelco products, Antelco’s liability is limited to the repair or replacement of defective goods. In no event will such a breach give rise to any liability for punitive damages, loss of profits or expected future business, damage to reputation or goodwill, loss of any order or contract or any consequential or indirect loss or damage arising from any cause whatsoever.

Force Majeure

Warranty

If by reason of any fact, circumstance, matter or thing beyond its reasonable control, Antelco Pty Ltd is unable to perform in whole or in part any obligation under these Conditions of Sale then Antelco Pty Ltd is relieved of that obligation to the extent and for the period that it is so unable to perform and is not liable to the customer in respect of such inability.

In addition to any statutory warranty and subject to these Conditions of Sale, Antelco Pty Ltd warrants that its products are of merchantable quality, free from defects or faults, and are fit for the purpose for which they were manufactured or supplied. At its option and in its sole discretion, Antelco Pty Ltd will repair or replace goods found to be defective in workmanship or materials within twelve (12) months of the date of purchase. The customer will be responsible for delivering products to be repaired to Antelco Pty Ltd.

Freight and Insurance In addition to sea or air freight costs, customers will be charged for transport and any associated costs for delivery to an international departure point.

Shortages or Damaged Goods

Returns Goods will be accepted for return only if prior approval has been obtained from Antelco Pty Ltd. The goods must be undamaged, unsoiled and in a saleable condition. All returned goods must include a copy of the original invoice and packing slip. Goods that are approved for return after thirty (30) days from the date of delivery are subject to a 15% restocking charge. Freight cost and risk will remain the responsibility of the customer.

APPENDIX

Goods are despatched uninsured and at the risk of customers who acknowledge that delivery insurance is their responsibility. Antelco can obtain insurance for customers on request.

Risk of loss or damage to the goods passes to the customer and/or the carrier at the time of despatch from Antelco Pty Ltd warehouse at Murray Bridge. Antelco Pty Ltd accepts no liability for goods lost or damaged in transit, and any carrier shall be deemed to be the agent of the customer. Goods held or stored for the customer shall be at the risk and expense of the customer, from the time at which the goods otherwise have been available for collection or despatch. Notwithstanding that the risk of the goods may pass to the customer, Antelco Pty Ltd retains all legal and equitable rights of ownership of the goods until payment has been made in full (including interest and any other charges associated with the supply of the goods).

Orders will be accepted and invoiced at the prices in effect at the date of shipment. Antelco Pty Ltd reserves the right to change prices without notice.

Applicable Law All matters for determination between Antelco Pty Ltd and the customer shall be determined by a court of competent jurisdiction in the State of South Australia according to the laws of South Australia.

Antelco irrigation equipment metric catalogue • 2012 • www.antelco.com

7.1


®

ANTELCO P U T T I N G

W A T E R

W H E R E

Head Office and Warehouse Antelco Pty Ltd ABN 50 008 062 708 PO Box 246 Murray Bridge SA 5253 Australia Tel +61 8 8532 3388 Fax +61 8 8532 4365 Email murraybridge@antelco.com.au Sales, Marketing, Research and Development Antelco Pty Ltd ABN 50 008 062 708 14–18 Rosslyn Street Mile End SA 5031 Australia Tel +61 8 8416 9000 Fax +61 8 8416 9099 Email adelaide@antelco.com.au Sales, Marketing Orders and Warehouse (UK) Antelco UK Ltd 17a Chartmoor Road Leighton Buzzard Bedfordshire LU7 4WG UK Tel +44 152 585 9990 Fax +44 152 521 7985 Email buzz@antelco.co.uk Sales, Marketing and Warehouse (USA) Antelco Corporation 886 Waterway Place Longwood Florida 32750 USA Tel +1 407 331 0699 Fax +1 407 331 0169 Email info@antelco.com Tollfree 1 800 869 7597

www.antelco.com

I T

® C O U N T S !

®

2012 Antelco Metric Catalogue  

Irrigation Equipment Metric Catalogue www.antelco.com P U T T I N G W AT E R W H E R E I T C O U N T S ! ® ® FILTRATION ®

Read more
Read more
Similar to
Popular now
Just for you