Step 01: Cut out the piece’s sides with the robotic hot wire cutter
The Vault’s Surfacing Detail
Step 02: Slice the piece in half with the robotic hot wire cutter
Step 03: Score the CNC router’s spoilboard with a .02 Z-depth
Step 02 Robotic Fabrication // Photo: Scott Chriss
Step 04: Using double-sided tape, attach pieces to the spoilboard
Step 05: Mill out the surface using a 3/8” ball end bit with a .125 stepover
Step 06: Attach pieces back together using white latex paint
The Vault on Display in the Courtyard