Page 208

SECTI ON T13 : STREETSTOCK SPECI FI CATI ONS AND RACI NG RULES

2009/10 New Zealand Streetstock Champion – Geoff Loan T13

STREETSTOCK SPECIFICATIONS

T13-1 Specifications T13-1-1 General (a) Only modifications specifically mentioned in this chapter are approved - no other modifications are allowed. (b) In any vehicles that require OEM parts, their components must retain their original identification marks. (c) All Streetstocks are to have a weight limit when ready to race and this weight must not be exceeded at any time before, during or after competition. (i) For cars with an original kerb weight of up to 1000kg a weight increase of 20% above kerb weight is permitted. (ii) For cars with an original kerb weight from 1000kg to 1500kg the weight increase may be up to 10% but no Streetstock ready to race is permitted to exceed 1550kg. (d) All glass (except rear vision mirrors), headlights, upholstery, and potentially inflammable material, must be removed. Instruments with glass are allowed, subject to inspection. Only blue, white or green instrument and warning lights are allowed. Towbars also to be removed. T13-1-2 Body (a) Only approved Saloon, Station-wagon, Coupe or Van bodies are allowed. (b) Body shape is not to be altered, except for the following: Up to 75mm may be cut away from wheel openings of front and rear guards. Guards to retain original shape. (c) Centre door pillar must remain OEM between upper and lower side window openings. (d) Front body panel(s) shape, to top line of front bumper, must be as original. Original front panels and nose cone may be reproduced to original shape, 1.2mm maximum thickness.

2010 ELECTRONIC RULEBOOK

208

2010 NZ Speedway Rule Book  

2010 NZ Speedway Rule Book