Post Processing of Plastic Injection Products
Plastic parts can not be directly put into use after molding and demoulding, and some treatment is needed. Because this treatment is carried out after molding and demoulding, it is called post-processing. It is described as follows:
After demoulding, the plastic parts always have some excess materials, such as gate flying edge, which bring disadvantage to the appearance and use of the plastic parts, so it needs to be removed. This kind of removal is relatively simple, and can be removed by manual operation of some simple tools.
2. Heat treatment
1) the purpose of heat treatment
Because of the different cooling speed of physiology in the uneven plasticizing fire cavity in the barrel, the internal stress often occurs in the plastic parts. The existence of this internal stress brings great harm to the
quality of the plastic parts. The common way to eliminate this internal stress is to heat-treat the plastic parts.
2) the mechanism of heat treatment to eliminate internal stress.
The mechanism of heat treatment can eliminate internal stress.
(1) By heating, the forced frozen macromolecular bonds are relaxed and the solidified macromolecular bonds turn to random positions, thus eliminating this part of the internal stress.
(2) Increasing the crystallinity and stabilizing the crystalline structure, so as to improve the physical properties and reduce the internal stress of crystalline plastic products.
(3)heat treatment methods
The plastic parts are placed in a certain temperature liquid medium (water, mineral oil, glycerin, ethylene glycol, etc.) or hot air circulation oven, after a period of heating, then take out slowly cooling to room temperature.
Heat treatment temperature
Generally, the heat treatment temperature should be controlled at 10-20 C higher than the service temperature of the plastic parts or 10-20 C lower than the hot deformation temperature of the plastic parts. Too high temperature will cause warpage or deformation of the plastic parts. The temperature is too low and the internal stress can not be eliminated.
Heat treatment time
The heat treatment time depends on the plastic variety, the shape of the plastic parts and the molding process conditions. Generally, the greater the rigidity of the molecular bond, the thicker the wall is, the longer the heat treatment time is. In order to eliminate the internal stress of plastic parts.
3. Humidity control
1) The purpose of moisture control treatment is to insulate the plastic parts from air, prevent oxidation, speed up moisture absorption balance and make the size stable.
2) the humidity control time depends on the shape, thickness and crystallinity of the plastic parts, usually in a few hours.
3) the temperature of humidity control. Moisture control treatment is to just demoulded plastic parts into hot water treatment, hot water temperature is generally 80-100 degrees Celsius, hot deformation temperature is high value, low value.
In the humidity control process, when the required temperature and time are reached, it must be slowly cooled to room temperature, if the speed is too fast it will produce new internal stress.
4. surface printing, electroplating, ultrasonic welding and so on.
Ultrasonic plastic welding is a very frequently used process for postprocessing of plastic products.
JasonMould Industrial Company Limited, established in 2010, is a leading injection moulding manufacturer in China. JasonMould specializes in plastic mould production for household appliances, medical equipments, electronic equipments, safety equipments as well as monitoring system.
The company has over 15000 square metres factory. With plastic injection tooling divisions possessing different machinery and expertise, JasonMould offers tools from small and precise mobile phone parts to as big as automotive parts. Our tools are mainly exported to U.S.A., Europe, Japan and UK. JasonMould’s diversification strategy and full service has won compliment from customers all over the world. Our mission is to provide our customers high quality moulding products and services. We aim to exceed our customers’ expectations of pricing, quality and on-time delivery. To achieve our mission, JasonMould: Commits to continually improve employee skills and efficiency, Provides our employees a clean and safe working environment, Upgrades machine technology and support equipment through a strict maintenance program, and Maintains customers’ tooling to its highest peak of performance For more about custom manufacturer of plastic molding products,please visit https://www.jasonmolding.com/ Inquiry Contact: Contact person: James Yuan
Company name: JasonMould Industrial Company Limited Address: LongGang Village,LongXi Town,BoLuo County,HuiZhou City,GuangDong Province, China Telephone: 86-752-6682869 Email: firstname.lastname@example.org Website: https://www.jasonmolding.com