Page 1

2012

ARCHITECTURAL ELEMENTS www.panelplus.co


J pgs. 500-575

Countertop Support Brackets Add additional counter space to your existing counter or workstation with Countertop Support Standoffs. Manufactured of solid polished or matte finished carbon steel in straight and angled styles, the Countertop Support Standoffs are well suited for any type of décor, and can be easily installed for use with either solid or glass tops.

Decorative Cast Iron & Cast Aluminum Offered as intricately detailed brackets fashioned from Cast Iron and Aluminum, this series of Brackets can be used in either interior or exterior applications for decorative purposes. pgs. 566-567

pgs. 574-575

Architectural Elements

Appliques, Corbels, Brackets, Scrolls & More J-500

Design A Column System

Door Panels

This collection consists of fluted, plain, weave, rope and reeded solid North American Hard Maple or Cherry half-round columns. Columns are used in conjunction with half caps & bases, center spindles, and end block to create a mix and match system.

Intended for use as cabinet door panel overlays, the Door Panels Collection is handcrafted by master artisans in your choice of Maple, White Oak and Cherry.

pgs. 562-564

pg. 565

Embossed Wood Produced from laminated wood with decorative details that are embossed into a Maple veneered surface.

• 2-3/4” Corner Posts - pg. 559 • 3-3/4” Half & Full - pgs. 558-559 • 5” Half & Full - pgs. 560-561

• Appliques - pgs. 544-546 • Scrolls - pg. 546

Lattice Insert Panels Available in square or diagonal patterns (frame not included), the Solid Wood Panel Inserts, in Red Oak, Maple and Cherry can be used in a variety of residential or commercial applications, and are ideally suited for use as cabinet door inserts, wine cabinets, closet storage systems, entertainment centers and ceiling panels. pg. 565

Polymer Resin Ornaments This collection, which is produced in exclusive molds, yields ornate and sharply defined details, perfect dimensions, and extremely consistent quality that not only conveys a striking physical and visual texture, it is unaffected by moisture, insects, UV and most common solvents. • Bases - pg. 541 • Capitals - pg. 541 • Cartouches - pg. 542 • Centers - pg. 542 • Corbels - pg. 542

Island Legs Offered in traditional or contemporary Full and Half Round, Rope, Fluted or French design motifs, the Island Legs collection is available in solid North American Hard Maple, Red Oak, Cherry and Alder.

• Decos - pg. 543 • Festoons - pg. 543 • Rosettes - pg. 543 • Scrolls - pg. 543

Non-Textured Smooth Ornaments Manufactured of high density polyurethane, these plaster-like decorative ornaments are lightweight, primed and ready to be painted. • Walls & Ceiling Ornaments pgs. - 552-555

Non-Textured Smooth Corbels Lightweight, factory primed and ready to paint, Non-Textured Smooth collection of high density polyurethane Corbels can be used in a wide variety of non structural, decorative applications.

• Corbels - pgs. 556-557


Royal Wood Collection North American Hardwood Collection Comprising a vast selection of the finest quality architectural elements, the Royal Wood Collection is handcrafted by master artisan in your choice of solid North American Hard Maple, Red Oak, Cherry, and Alder.

• Appliques - pg. 507 • Capitals - pg. 505 • Capitals & Filler Mouldings - pg. 527 • Cartouches - pgs. 508-509 • Corbels & Brackets • Acanthus Leaf - pgs. 522-526 • Classic Plain - pgs. 518-519 • Florals - pg. 521 • Grapes - pgs. 520 • Mission Style - pg. 517 • Plain - pgs. 513-515 • Weave - pg. 518 • Custom Carvings Wood Program - pg. 528 • Decos - pg. 506 • Rosettes - pgs. 504-505, 527 • Scrolls - pgs. 510-512

Stainless Steel Brackets The U.S. manufactured, ISO 9002 certified solid steel countertop support bracket collection is not only aesthetically pleasing, it combines unsurpassed beauty, quality and industrial strength to present support brackets that can support countertops with a load rating of up to 1,000 pounds.

Textured/Woodgrain Ornaments

• Elevated Support Brackets - pgs. 571-572 • Floating Support Brackets - pg. 568 • Standard Single Level Countertop Support Brackets - pgs. 569 - 571

The Resin Artisan Collection Offered in a wide variety of architectural elements crafted from a select Hardwood Maple and Resin blend, The Resin Artisan collection, which can be tooled and finished in the same manner as wood, is not just durable, it captures a depth and definition of design that is unequaled in other mediums including plaster.

White Hardwood Similar in appearance to that of Bass wood, the White Hardwood collection is made from medium density light grained White Wood. • Appliques - pgs. 529-530 • Corbel - pg. 530

• Bases - pgs. 532 • Capitals - pgs. 532 • Cartouches - pgs. 533 • Ceiling Elements - pgs. 540 • Centers - pgs. 533 • Columns - pgs. 532 • Corbels - pgs. 534 • Corner Elements - pgs. 533 • Decos - pgs. 535 • Drops - pgs. 535 • Faces - pgs. 535 • Festoons - pgs. 535 • Finials - pgs. 535 • Friezes - pgs. 536

Are produced of a lightweight polyurethane polymer, not only exude crisp, deep relief, ornate detail, they are impervious to moisture and other undesirable elements. Ornaments come unfinished only. • Capitals - pg. 548 • Cartouches - pg. 547 • Centers - pg. 551 • Corbels - pg. 548 • Onlays - pgs. 549-550 • Panels - pg 550 • Rosettes - pg. 551 • Scrolls - pg. 548

• Keystones - pg. 539 • Medallions - pg. 536 • Mouldings - pg. 536 • Onlays - pg. 534 • Panels - pg. 539 • Plinth Blocks - pg. 538 • Pulls - pg. 538 • Rings - pg. 538 • Rosettes - pg. 540 • Sconces - pg. 540 • Scrolls - pg. 537 • Specialties - pg. 537 • Swags - pg. 537

Work Station Support Brackets This brackets series, which is available in a variety of sizes and Formica matched finishes, offers unmatched, robust support with its ability to support up to 1,000 pounds per Bracket for a wide range of uses. pg. 573

J-501


Decorative Appliques, Corbels & Scrolls

We have expanded our line of decorative appliques, scrolls & corbels. Available in a variety of materials, we have something to fit every design, size and budget. Whether you are putting a finishing touch on a custom cabinet or creating a dramatic focal point on your mantel, we are your source for decorative ornaments. NOTE: Due to hand carving, slight variations in size and design may occur.

ROYAL WOOD COLLECTION These ornaments are made of North American Hard Maple, Red Oak, Cherry and Alder. Installation:

WHITE HARDWOOD

These ornaments are made of Medium Density light grain White Wood. (Similar to Bass Wood).

* These items can be mounted with the pre-attached keyhole brackets. All other items apply a bead of standard construction adhesive to the back of ornament and secure to mounting surface using finish nails or standard screws. Predrill and countersink all nails/ screws. Fill any holes with wood putty, and sand with a fine grit sandpaper.

Finishing:

*All items noted are supplied with preattached keyhole hangers.

Can be painted or faux finished with any quality latex or oil based product. If painting, a prime coat is required. Can be stained with standard stains. Follow stain manufacturer’s instructions for top coating. Product varies in color from piece to piece and has a woodgrain texture. Available in maple and white hardwood. See product description for availability.

EMBOSSED VENEER

These ornaments are made of a laminated wood with a veneered surface. Detail is pressed in.

Installation:

Apply a bead of standard construction adhesive to the back of ornament and secure to mounting surface using finish nails or standard screws. Predrill and countersink all nails/screws. Fill any holes with wood putty, and sand with a fine grit sandpaper.

Finishing:

Can be painted or faux finished with any quality latex or oil based product. If painting, a prime coat is required. Can be stained with standard stains. Follow stain manufacturer’s instructions for top coating. See product description for availability.

ARTISAN RESIN COLLECTION

Offered in a wide variety of architectural elements crafted from a select Hardwood Maple and Resin blend, The Resin Artisan collection, can be tooled and finished in the same manner as wood. Installation:

Installation:

Apply a bead of standard construction adhesive to the back of ornament and secure to mounting surface by countersinking finish nails or temporarily secure with a clamp, tape, etc. until adhesive cures. Due to the fragile nature of these items, we recommend predrilling any nail holes. Fill any holes with wood putty, and sand with a fine grit sandpaper.

Finishing:

Can be painted or faux finished with any quality latex or oil based product. If painting, a prime coat is required. Can be stained with standard stains. Follow stain manufacturer’s instructions for top coating. Product varies in color from piece to piece and has a slight woodgrain texture. Available in Bombax Ceiba (similar to pine), maple and red oak veneer. See product description for availability.

Apply a bead of standard construction adhesive to the back of the ornament and secure it to its intended mounting surface using standard screws (galvanized for exterior applications). Predrill and countersink all screws. Fill any holes with exterior wood putty and sand with fine grit sandpaper.

Finishing:

Can either be painted or faux finished with any high quality latex or oil based product. Can also be stained with a gel or nonpenetrating stain. Fill any holes with exterior wood putty and sand with fine grit sandpaper.

Some ornaments have been finished for photographic purposes-ornaments come unfinished only.

J-502


POLYMER RESIN ORNAMENTS These ornaments are made of a polymer resin.

POLYURETHANE NON-TEXTURED CORBELS

These corbels are made of non-textured high density polyurethane. Lightweight, factory primed and ready to paint.

Installation:

Apply a bead of standard construction adhesive to the back of ornament, then secure to mounting surface using standard screws (galvanized for exterior applications). Predrill and countersink all screws. Fill any holes with exterior wood putty, and sand with a fine grit sandpaper.

Finishing:

Can be painted or faux finished with any quality latex or oil based product. Can also be stained with a gel/non-penetrating stain. Recommended to clean with mineral spirits before finishing. Follow stain manufacturer’s instructions for top coating. If painting, priming is not necessary, although two finish coats may be required for light colors. Product is tan in color and surface varies from smooth to woodgrain like texture.

POLYURETHANE TEXTURED ORNAMENTS These ornaments are made of a lightweight polymer.

Installation:

Apply a bead of standard construction adhesive to the back of the ornament and secure it to its intended mounting surface by countersinking fishing nails (galvanized for exterior applications) or temporarily secure it with a clamp, tape, or otherwise until the adhesive cures. Fill any holes with exterior wood putty and sand with fine grit sandpaper.

Finishing:

Can be painted or faux finished with any quality latex or oil based product. Can also be stained with a gel/non-penetrating stain. Follow stain manufacturer’s instructions for top coating.

POLYURETHANE NON-TEXTURED ORNAMENTS

These ornaments are made of non-textured high density polyurethane. Lightweight, factory primed and ready to paint.

Installation:

Apply a bead of standard construction adhesive to the back of ornament and secure to mounting surface by countersinking finish nails (galvanized for exterior applications) or temporarily secure with a clamp, tape, etc. until adhesive cures. Fill any holes with exterior wood putty, and sand with a fine grit sandpaper.

Finishing:

Can be painted or faux finished with any quality latex or oil based product. Can also be stained with a gel/non-penetrating stain. Follow stain manufacturer’s instructions for top coating. Product is yellowish/beige in color and surface has a simulated woodgrain texture.

Installation:

Apply a bead of standard construction adhesive to the back of the ornament and secure it to its intended mounting surface by countersinking fishing nails (galvanized for exterior applications) or temporarily secure it with a clamp, tape, or otherwise until the adhesive cures. Fill any holes with exterior wood putty and sand with fine grit sandpaper.

Finishing:

Can be painted or faux finished with any quality latex or oil based product. Can also be stained with a gel/non-penetrating stain. Follow stain manufacturer’s instructions for top coating.

Some ornaments have been finished for photographic purposes-ornaments come unfinished only.

J-503


ROYAL WOOD COLLECTION

ROSETTES

These ornaments are made of North American Hard Maple, Red Oak, Cherry & Alder.

RWC02-S (Hard Maple) RWC02-S-OAK (Red Oak) RWC02-S-CH (Cherry) RWC02-S-ALD (Alder) 2-7/8” Dia. x 1/2” Depth

RWC003-S (Hard Maple) RWC003-S-OAK (Red Oak) RWC003-S-CH (Cherry) 3-1/2” Dia. x 3/8” Depth

RWC02-M (Hard Maple) RWC02-M-OAK (Red Oak) RWC02-M-CH (Cherry) RWC02-M-ALD (Alder) 3-3/4” Dia. x 5/8” Depth

RWC003-M (Hard Maple) RWC003-M-OAK (Red Oak) RWC003-M-CH (Cherry) 4” Dia. x 1/2” Depth RWC003-L (Hard Maple) RWC003-L-OAK (Red Oak) RWC003-L-CH (Cherry) 5-1/2” Dia. x 5/8” Depth

RWC02-L (Hard Maple) RWC02-L-OAK (Red Oak) RWC02-L-CH (Cherry) RWC02-L-ALD (Alder) 4-7/8” Dia. x 3/4” Depth

RWC003-XL (Hard Maple) RWC003-XL-OAK (Red Oak) RWC003-XL-CH (Cherry) 7” Dia. x 7/8” Depth

RWC02-XL (Hard Maple) RWC02-XL-OAK (Red Oak) RWC02-XL-CH (Cherry) RWC02-XL-ALD (Alder) 6-1/2” Dia. x 1” Depth

RWC004-S (Hard Maple) RWC004-S-OAK (Red Oak) RWC004-S-CH (Cherry) RWC004-S-ALD (Alder) 4” Dia. x 3/8” Depth

N EW

!

RWC004-M (Hard Maple) RWC004-M-OAK (Red Oak) RWC004-M-CH (Cherry) RWC004-M-ALD (Alder) 5” Dia. x 1/2” Depth RWC004-L (Hard Maple) RWC004-L-OAK (Red Oak) RWC004-L-CH (Cherry) RWC004-L-ALD (Alder) 6” Dia. x 5/8” Depth

RWC004-XL (Hard Maple) RWC004-XL-OAK (Red Oak) RWC004-XL-CH (Cherry) RWC004-XL-ALD (Alder) 8” Dia. x 7/8” Depth

RWC011-S (Hard Maple) RWC011-S-OAK (Red Oak) RWC011-S-CH (Cherry) RWC011-S-ALD (Alder) 3-1/4”H x 3-1/4” W x 3/8” Depth RWC011-M (Hard Maple) RWC011-M-OAK (Red Oak) RWC011-M-CH (Cherry) RWC011-M-ALD (Alder) 4”H x 4” W x 1/2” Depth

RWC011-L (Hard Maple) RWC011-L-OAK (Red Oak) RWC011-L-CH (Cherry) RWC011-L-ALD (Alder) 4-7/8”H x 4-7/8” W x 5/8” Depth

(Measurements are approximate)

J-504

RWC04-S (Hard Maple) RWC04-S-OAK (Red Oak) RWC04-S-CH (Cherry) RWC04-S-ALD (Alder) 3” Dia. x 1-1/4” Depth

RWC04-M (Hard Maple) RWC04-M-OAK (Red Oak) RWC04-M-CH (Cherry) RWC04-M-ALD (Alder) 4” Dia. x 1-5/8” Depth RWC04-L (Hard Maple) RWC04-L-OAK (Red Oak) RWC04-L-CH (Cherry) RWC04-L-ALD (Alder) 5” Dia. x 2” Depth

RWC04-XL (Hard Maple) RWC04-XL-OAK (Red Oak) RWC04-XL-CH (Cherry) RWC04-XL-ALD (Alder) 7” Dia. x 2-13/16” Depth

RWC01-S (Hard Maple) RWC01-S-OAK (Red Oak) RWC01-S-CH (Cherry) RWC01-S-ALD (Alder) 2-1/2” Sq. x 1/2” Depth

RWC01-M (Hard Maple) RWC01-M-OAK (Red Oak) RWC01-M-CH (Cherry) RWC01-M-ALD (Alder) 3-1/4” Sq. x 3/4” Depth RWC01-L (Hard Maple) RWC01-L-OAK (Red Oak) RWC01-L-CH (Cherry) RWC01-L-ALD (Alder) 3-3/4” Sq. x 7/8” Depth


ROYAL WOOD COLLECTION

ROSETTES & CAPITALS

These ornaments are made of North American Hard Maple, Red Oak, Cherry & Alder. RWC104-XS (Hard Maple) RWC104-XS-OAK (Red Oak) RWC104-XS-CH (Cherry) 3” H x 3” W x 3/8” Depth RWC104-S (Hard Maple) RWC104-S-OAK (Red Oak) RWC104-S-CH (Cherry) 4” H x 4” W x 1/2” Depth

RWC008-S (Hard Maple) RWC008-S-OAK (Red Oak) RWC008-S-CH (Cherry) 3-1/4”H x 1-5/8”W x 3/8” Depth

RWC104-M (Hard Maple) RWC104-M-OAK (Red Oak) RWC104-M-CH (Cherry) 5” H x 5” W x 1/2” Depth

RWC008-M (Hard Maple) RWC008-M-OAK (Red Oak) RWC008-M-CH (Cherry) 3-7/8”H x 1-7/8”W x 1/2” Depth

RWC104-L (Hard Maple) RWC104-L-OAK (Red Oak) RWC104-L-CH (Cherry) 6” H x 6” W x 5/8” Depth

RWC008-L (Hard Maple) RWC008-L-OAK (Red Oak) RWC008-L-CH (Cherry) 5-3/8”H x 2-1/2”W x 1/2” Depth

RWC104-XL (Hard Maple) RWC104-XL-OAK (Red Oak) RWC104-XL-CH (Cherry) 8” H x 8” W x 7/8” Depth

RWC008-XL (Hard Maple) RWC008-XL-OAK (Red Oak) RWC008-XL-CH (Cherry) 5-7/8”H x 3-1/4”W x 5/8” Depth

RWC113-S (Hard Maple) RWC113-S-OAK (Red Oak) RWC113-S-CH (Cherry) RWC113-S-ALD (Alder) 5-1/2” H x 3-1/4” W x 1” Depth 2-3/4" Collar*

RWC009-S (Hard Maple) RWC009-S-OAK (Red Oak) RWC009-S-CH (Cherry) RWC009-S-ALD (Alder) 3-1/8” H x 3”W x 1/2” Depth

RWC009-L (Hard Maple) RWC009-L-OAK (Red Oak) RWC009-L-CH (Cherry) RWC009-L-ALD (Alder) 3-7/8”H x 3-3/4”W x 5/8” Depth

RWC113-L (Hard Maple) RWC113-L-OAK (Red Oak) RWC113-L-CH (Cherry) RWC113-L-ALD (Alder) 7-1/2” H x 4-1/2” W x 1-1/4” Depth 3-3/4" Collar*

RWC119-S (Hard Maple) RWC119-S-OAK (Red Oak) RWC119-S-CH (Cherry) RWC119-S-ALD (Alder) 4” H x 3-7/8” W x 1” Depth 2-3/4" Collar*

RWC116-S (Hard Maple) RWC116-S-OAK (Red Oak) RWC116-S-CH (Cherry) 3” H x 6-7/8” W x 1-5/8” Depth 2-3/4" Collar* RWC116-M (Hard Maple) RWC116-M-OAK (Red Oak) RWC116-M-CH (Cherry) 4” H x 9-1/4” W x 2” Depth 3-3/4" Collar*

RWC119-M (Hard Maple) RWC119-M-OAK (Red Oak) RWC119-M-CH (Cherry) RWC119-M-ALD (Alder) 5-3/8” H x 5-1/4” W x 1-1/8” Depth 3-3/4" Collar*

RWC116-L (Hard Maple) RWC116-L-OAK (Red Oak) RWC116-L-CH (Cherry) 4-5/8” H x 10-3/8” W x 2-3/8” Depth

RWC122-S (Hard Maple) RWC122-S-OAK (Red Oak) RWC122-S-CH (Cherry) 3-3/8” H x 4-1/8” W x 1-3/8” Depth 2-3/4" Collar* RWC122-L (Hard Maple) RWC122-L-OAK (Red Oak) RWC122-L-CH (Cherry) 4-3/4” H x 5-5/8” W x 1-3/4” Depth 3-3/4" Collar*

RWC119-L (Hard Maple) RWC119-L-OAK (Red Oak) RWC119-L-CH (Cherry) RWC119-L-ALD (Alder) 6-1/4” H x 6-1/8” W x 1-1/4” Depth RWC119-XL (Hard Maple) RWC119-XL-OAK (Red Oak) RWC119-XL-CH (Cherry) RWC119-XL-ALD (Alder) 8-1/8” H x 8-1/8” W x 1-5/8” Depth

*See coordinating filler mouldings on page 527.

(Measurements are approximate)

J-505


ROYAL WOOD COLLECTION

DECOS

These ornaments are made of North American Hard Maple, Red Oak, Cherry & Alder.

RWC007-S (Hard Maple) RWC007-S-OAK (Red Oak) RWC007-S-CH (Cherry) RWC007-S-ALD (Alder) 5-5/8”H x 3-1/4”W x 3/4” Depth RWC007-M (Hard Maple) RWC007-M-OAK (Red Oak) RWC007-M-CH (Cherry) RWC007-M-ALD (Alder) 7-5/8”H x 4-3/8”W x 1” Depth

RWC007-L (Hard Maple) RWC007-L-OAK (Red Oak) RWC007-L-CH (Cherry) RWC007-L-ALD (Alder) 9-1/8”H x 5-1/4”W x 1-1/8” Depth RWC007-XL (Hard Maple) RWC007-XL-OAK (Red Oak) RWC007-XL-CH (Cherry) RWC007-XL-ALD (Alder) 11-7/8”H x 7”W x 1-3/8” Depth

RWC05-M (Hard Maple) RWC05-M-OAK (Red Oak) RWC05-M-CH (Cherry) RWC05-M-ALD (Alder) 7-1/2” H x 3-1/8” W x 1” Depth

RWC05-L (Hard Maple) RWC05-L-Oak (Red Oak) RWC05-L-CH (Cherry) RWC05-L-ALD (Alder) 9-1/4” H x 3-7/8” W x 1-1/4” Depth

RWC101-S (Hard Maple) RWC101-S-OAK (Red Oak) RWC101-S-CH (Cherry) 5-5/8” H x 3-3/8” W x 3/4” Depth

RWC010-S (Hard Maple) RWC010-S-OAK (Red Oak) RWC010-S-CH (Cherry) 2-7/8”H x 1-1/8”W x 3/8” Depth

RWC101-L (Hard Maple) RWC101-L-OAK (Red Oak) RWC101-L-CH (Cherry) 9-1/8” H x 5-1/2” W x 1-1/8” Depth

RWC010-L (Hard Maple) RWC010-L-OAK (Red Oak) RWC010-L-CH (Cherry) 5”H x 1-7/8”W x 1/2” Depth

RWC101-M (Hard Maple) RWC101-M-OAK (Red Oak) RWC101-M-CH (Cherry) 7-1/2” H x 4-1/2” W x 1” Depth

RWC101-XL (Hard Maple) RWC101-XL-OAK (Red Oak) RWC101-XL-CH (Cherry) 12” H x 7” W x 1-3/8” Depth

RWC006-S (Hard Maple) RWC006-S-OAK (Red Oak) RWC006-S-CH (Cherry) 3-3/8”H x 2-7/8” W x 5/8” Depth RWC006-M (Hard Maple) RWC006-M-OAK (Red Oak) RWC006-M-CH (Cherry) 3-7/8”H x 3-3/8” W x 3/4” Depth RWC006-L (Hard Maple) RWC006-L-OAK (Red Oak) RWC006-L-CH (Cherry) 5-3/8”H x 4-1/2” W x 1” Depth

(Measurements are approximate)

J-506

RWC05-S (Hard Maple) RWC05-S-OAK (Red Oak) RWC05-S-CH (Cherry) RWC05-S-ALD (Alder) 5-7/8” H x 2-1/2” W x 7/8” Depth

RWC010-M (Hard Maple) RWC010-M-OAK (Red Oak) RWC010-M-CH (Cherry) 3-7/8”H x 1-1/2”W x 1/2” Depth

RWC005-S (Hard Maple) RWC005-S-OAK (Red Oak) RWC005-S-CH (Cherry) RWC005-S-ALD (Alder) 3-1/4”H x 2” W x 1/2” Depth

RWC005-M (Hard Maple) RWC005-M-OAK (Red Oak) RWC005-M-CH (Cherry) RWC005-M-ALD (Alder) 5”H x 3” W x 5/8” Depth

RWC005-L (Hard Maple) RWC005-L-OAK (Red Oak) RWC005-L-CH (Cherry) RWC005-L-ALD (Alder) 6-5/8”H x 3-7/8” W x 7/8” Depth


ROYAL WOOD COLLECTION

APPLIQUES

These ornaments are made of North American Hard Maple, Red Oak, Cherry & Alder. RWC131-S (Hard Maple) RWC131-S-OAK (Red Oak) RWC131-S-CH (Cherry) RWC131-S-ALD (Alder) 12” H x 1-1/2” W x 3/8” Depth RWC131-L (Hard Maple) RWC131-L-OAK (Red Oak) RWC131-L-CH (Cherry) RWC131-L-ALD (Alder) 17-1/4” H x 2” W x 3/8” Depth

*Supplied with pre-attached keyhole hangers.

RWC107-M (Hard Maple) RWC107-M-OAK (Red Oak) RWC107-M-CH (Cherry) RWC107-M-ALD (Alder) 9-7/8” H x 5-1/4” W x 5/8” Depth

Width Ranges: 8” 12” 16”

RWC22-S (Hard Maple) RWC22-S-OAK (Red Oak) RWC22-S-CH (Cherry) 2-1/4” H x 8-1/4” W x 3/8” Depth

RWC22-M (Hard Maple) RWC22-M-OAK (Red Oak) RWC22-M-CH (Cherry) 3” H x 11-1/2” W x 1/2” Depth

RWC22-L(Hard Maple) RWC22-L-OAK (Red Oak) RWC22-L-CH (Cherry) 3-7/8” H x 16” W x 5/8” Depth

Width Ranges: 12” 18” 24” RWC128-S (Hard Maple) RWC128-S-OAK (Red Oak) RWC128-S-CH (Cherry) 2-1/8” H x 12” W x 1/2” Depth

RWC110-S (Hard Maple) RWC110-S-OAK (Red Oak) RWC110-S-CH (Cherry) 2-3/4” H x 2-3/4” W x 5/8” Depth RWC110-M (Hard Maple) RWC110-M-OAK (Red Oak) RWC110-M-CH (Cherry) 3-3/4” H x 3-3/4” W x 3/4” Depth RWC110-L (Hard Maple) RWC110-L-OAK (Red Oak) RWC110-L-CH (Cherry) 4” H x 4” W x 1” Depth

RWC128-M (Hard Maple) RWC128-M-OAK (Red Oak) RWC128-M-CH (Cherry) 3-1/4” H x 18” W x 1/2” Depth

RWC128-L (Hard Maple) RWC128-L-OAK (Red Oak) RWC128-L-CH (Cherry) 4-1/4” H x 24” W x 5/8” Depth

(Measurements are approximate)

J-507


ROYAL WOOD COLLECTION

CARTOUCHES

These ornaments are made of North American Hard Maple, Red Oak, Cherry & Alder.

Width Ranges: 18” 24” 31” RWC17-S (Hard Maple) RWC17-S-OAK (Red Oak) RWC17-S-CH (Cherry) 3-3/8” H x 18-1/4” W x 1/2” Depth

RWC17-M (Hard Maple) RWC17-M-OAK (Red Oak) RWC17-M-CH (Cherry) 4-3/8” H x 23-7/8” W x 1/2” Depth

RWC17-L (Hard Maple) RWC17-L-OAK (Red Oak) RWC17-L-CH (Cherry) 5-3/4” H x 31” W x 5/8” Depth

RWC24-S (Hard Maple) RWC24-S-OAK (Red Oak) RWC24-S-CH (Cherry) RWC24-S-ALD (Alder) 2-1/2” H x 12” W x 3/8” Depth

Width Ranges: 12” 18” 28”

RWC24-M (Hard Maple) RWC24-M-OAK (Red Oak) RWC24-M-CH (Cherry) RWC24-M-ALD (Alder) 3-3/4” H x 18-3/8” W x 1/2” Depth RWC24-L (Hard Maple) RWC24-L-OAK (Red Oak) RWC24-L-CH (Cherry) RWC24-L-ALD (Alder) 5-5/8” H x 27-1/2” W x 5/8” Depth

Width Ranges: 12” 18” 24” 30” RWC19-S (Hard Maple) RWC19-S-OAK (Red Oak) RWC19-S-CH (Cherry) RWC19-S-ALD (Alder) 2-5/8”H X 12”W x 3/8” Depth

RWC19-M (Hard Maple) RWC19-M-OAK (Red Oak) RWC19-M-CH (Cherry) RWC19-M-ALD (Alder) 3-7/8”H X 18-1/4”W x 1/2” Depth

RWC19-L (Hard Maple) RWC19-L-OAK (Red Oak) RWC19-L-CH (Cherry) RWC19-L-ALD (Alder) 5-1/4”H X 24”W x 5/8” Depth

Width Ranges: 9” 12” 16” 20”

RWC18-S (Hard Maple) RWC18-S-OAK (Red Oak) RWC18-S-CH (Cherry) 2-1/2” H x 9” W x 3/8” Depth RWC18-L (Hard Maple) RWC18-L-OAK (Red Oak) RWC18-L-CH (Cherry) 4-1/2” H x 15-7/8” W x 1/2” Depth

Width Ranges: 6” 11” 16”

RWC18-M (Hard Maple) RWC18-M-OAK (Red Oak) RWC18-M-CH (Cherry) 3-1/2” H x 11-7/8” W x 1/2” Depth RWC18-XL (Hard Maple) RWC18-XL-OAK (Red Oak) RWC18-XL-CH (Cherry) 5-7/8” H x 20-1/8” W x 5/8” Depth

(Measurements are approximate)

J-508

RWC19-XL (Hard Maple) RWC19-XL-OAK (Red Oak) RWC19-XL-CH (Cherry) RWC19-XL-ALD (Alder) 6-1/2”H X 30”W x 3/4” Depth

RWC23-S (Hard Maple) RWC23-S-OAK (Red Oak) RWC23-S-CH (Cherry) RWC23-S-ALD (Alder) 2-3/4” H x 5-1/2” W x 3/8” Depth

RWC23-M (Hard Maple) RWC23-M-OAK (Red Oak) RWC23-M-CH (Cherry) RWC23-M-ALD (Alder) 5-1/2” H x 10-7/8” W x 1/2” Depth RWC23-L (Hard Maple) RWC23-L-OAK (Red Oak) RWC23-L-CH (Cherry) RWC23-L-ALD (Alder) 8-1/8” H x 15-7/8” W x 5/8” Depth


ROYAL WOOD COLLECTION

CARTOUCHES

These ornaments are made of North American Hard Maple, Red Oak, Cherry & Alder.

Width Ranges: 18” 24” 30”

RWC125-S (Hard Maple) RWC125-S-OAK (Red Oak) RWC125-S-CH (Cherry) 3-5/8” H x 18” W x 3/4” Depth

RWC125-M (Hard Maple) RWC125-M-OAK (Red Oak) RWC125-M-CH (Cherry) 4-3/4” H x 24” W x 7/8” Depth

RWC125-L (Hard Maple) RWC125-L-OAK (Red Oak) RWC125-L-CH (Cherry) 6” H x 30” W x 1” Depth

Width Ranges: 22” 31”

*RWC92-S (Hard Maple) *RWC92-S-OAK (Red Oak) *RWC92-S-CH (Cherry) 6-3/4” H x 21-1/2” W x 1-3/4” Depth *RWC92-L (Hard Maple) *RWC92-L-OAK (Red Oak) *RWC92-L-CH (Cherry) 9-7/8” H x 30-3/4” W x 2-1/2” Depth

*Supplied with pre-attached keyhole hangers.

shown painted Width Ranges: 12” 18” 24” 36”

RWC20-S (Hard Maple) RWC20-S-OAK (Red Oak) RWC20-S-CH (Cherry) 2-1/2” H x 12” W x 3/8” Depth

RWC20-M (Hard Maple) RWC20-M-OAK (Red Oak) RWC20-M-CH (Cherry) 3-3/4” H x 18-1/8” W x 1/2” Depth

RWC20-L (Hard Maple) RWC20-L-OAK (Red Oak) RWC20-L-CH (Cherry) 5” H x 24” W x 5/8” Depth

RWC20-XL (Hard Maple) RWC20-XL-OAK (Red Oak) RWC20-XL-CH (Cherry) 7-3/8” H x 36” W x 3/4” Depth

Width Ranges: 16” 24”

RWC25-S (Hard Maple) RWC25-S-OAK (Red Oak) RWC25-S-CH (Cherry) RWC25-S-ALD (Alder) 3-7/8” H x 16-1/8” W x 1/2” Depth

RWC25-L (Hard Maple) RWC25-L-OAK (Red Oak) RWC25-L-CH (Cherry) RWC25-L-ALD (Alder) 5-1/4”H x 24-3/8”W x 5/8” Depth

(Measurements are approximate)

J-509


SCROLLS

ROYAL WOOD COLLECTION These ornaments are made of North American Hard Maple, Red Oak, Cherry & Alder.

SOLD AS A LEFT & RIGHT PAIR (dimensions are for one side only)

RWC32-S (Hard Maple) RWC32-S-OAK (Red Oak) RWC32-S-CH (Cherry) RWC32-S-ALD (Alder) 4-3/4” H x 9” W x 3/8” Depth

RWC32-M (Hard Maple) RWC32-M-OAK (Red Oak) RWC32-M-CH (Cherry) RWC32-M-ALD (Alder) 5-7/8” H x 11-1/4” W x 1/2” Depth

RWC32-L (Hard Maple) RWC32-L-OAK (Red Oak) RWC32-L-CH (Cherry) RWC32-L-ALD (Alder) 7-1/4” H x 14” W x 5/8” Depth

RWC201-S (Hard Maple) RWC201-S-OAK (Red Oak) RWC201-S-CH (Cherry) RWC201-S-ALD (Alder) 5” H x 3-3/4” W x 1/2” Depth

RWC201-M (Hard Maple) RWC201-M-OAK (Red Oak) RWC201-M-CH (Cherry) RWC201-M-ALD (Alder) 9” H x 6-3/4” W x 1/2” Depth

RWC201-L (Hard Maple) RWC201-L-OAK (Red Oak) RWC201-L-CH (Cherry) RWC201-L-ALD (Alder) 12” H x 9-1/8” W x 5/8” Depth

RWC33-S (Hard Maple) RWC33-S-OAK (Red Oak) RWC33-S-CH (Cherry) 2” H x 5” W x 3/8” Depth

RWC33-M (Hard Maple) RWC33-M-OAK (Red Oak) RWC33-M-CH (Cherry) 2-3/4” H x 7” W x 1/2” Depth

RWC30-S (Hard Maple) RWC30-S-OAK (Red Oak) RWC30-S-CH (Cherry) 2-1/8” H x 6” W x 3/8” Depth

RWC33-L (Hard Maple) RWC33-L-OAK (Red Oak) RWC33-L-CH (Cherry) 4-3/4” H x 12” W x 1/2” Depth

RWC30-M (Hard Maple) RWC30-M-OAK (Red Oak) RWC30-M-CH (Cherry) 2-7/8” H x 7-7/8” W x 1/2” Depth

(Measurements are approximate)

J-510

RWC30-L (Hard Maple) RWC30-L-OAK (Red Oak) RWC30-L-CH (Cherry) 5” H x 13-3/4” W x 5/8” Depth


SCROLLS

ROYAL WOOD COLLECTION These ornaments are made of North American Hard Maple, Red Oak, Cherry & Alder.

SOLD AS A LEFT & RIGHT PAIR (dimensions are for one side only)

RWC27-S(Hard Maple) RWC27-S-OAK (Red Oak) RWC27-S-CH (Cherry) 2-3/4” H x 6” W x 3/8” Depth

RWC27-M (Hard Maple) RWC27-M-OAK (Red Oak) RWC27-M-CH (Cherry) 4-1/8” H x 9” W x 1/2” Depth

RWC27-L (Hard Maple) RWC27-L-OAK (Red Oak) RWC27-L-CH (Cherry) 5-5/8” H x 11-7/8” W x 5/8” Depth

RWC27-XL (Hard Maple) RWC27-XL-OAK (Red Oak) RWC27-XL-CH (Cherry) 7-1/8”H x 15”W x 3/4” Depth

*RWC28(Hard Maple) *RWC28-OAK (Red Oak) *RWC28-CH (Cherry) 7” H x 6-1/8” W x 1-1/8” Depth *Supplied with pre-attached keyhole hangers.

RWC29-S (Hard Maple) RWC29-S-OAK (Red Oak) RWC29-S-CH (Cherry) RWC29-S-ALD (Alder) 4” H x 3-5/8” W x 1/2” Depth

RWC29-M (Hard Maple) RWC29-M-OAK (Red Oak) RWC29-M-CH (Cherry) RWC29-M-ALD (Alder) 5-3/8” H x 4-7/8” W x 5/8” Depth

RWC29-L (Hard Maple) RWC29-L-OAK (Red Oak) RWC29-L-CH (Cherry) RWC29-L-ALD (Alder) 7-1/2”H x 6-7/8”W x 3/4”D

RWC29-XL (Hard Maple) RWC29-XL-OAK (Red Oak) RWC29-XL-CH (Cherry) RWC29-XL-ALD (Alder) 10-3/4”H x 9-5/8”W x 7/8”D

(Measurements are approximate)

J-511


SCROLLS

ROYAL WOOD COLLECTION These ornaments are made of North American Hard Maple, Red Oak, Cherry & Alder.

SOLD AS A LEFT & RIGHT PAIR (dimensions are for one side only)

RWC26-S (Hard Maple) RWC26-S-OAK (Red Oak) RWC26-S-CH (Cherry) 2-3/8” H x 6” W x 3/8” Depth

RWC26-L (Hard Maple) RWC26-L-OAK (Red Oak) RWC26-L-CH (Cherry) 4-3/4” H x 11-7/8” W x 5/8” Depth

RWC26-M (Hard Maple) RWC26-M-OAK (Red Oak) RWC26-M-CH (Cherry) 3-1/2” H x 9” W x 1/2” Depth

RWC26-XL (Hard Maple) RWC26-XL-OAK (Red Oak) RWC26-XL-CH (Cherry) 6-3/8” H x 15” W x 3/4” Depth

RWC91-S (Hard Maple) RWC91-S-OAK (Red Oak) RWC91-S-CH (Cherry) 11-3/8” H x 4-3/8” W x 1/2” Depth RWC91-M (Hard Maple) RWC91-M-OAK (Red Oak) RWC91-M-CH (Cherry) 15-5/8” H x 6” W x 5/8” Depth

RWC91-L (Hard Maple) RWC91-L-OAK (Red Oak) RWC91-L-CH (Cherry) 20-3/8” H x 7-7/8” W x 1” Depth

RWC204-S (Hard Maple) RWC204-S-OAK (Red Oak) RWC204-S-CH (Cherry) RWC204-S-ALD (Alder) 2-1/2” H x 5-1/2” W x 3/8” Depth

RWC204-M (Hard Maple) RWC204-M-OAK (Red Oak) RWC204-M-CH (Cherry) RWC204-M-ALD (Alder) 3-7/8” H x 9-1/8” W x 1/2” Depth

(Measurements are approximate)

J-512

RWC204-L (Hard Maple) RWC204-L-OAK (Red Oak) RWC204-L-CH (Cherry) RWC204-L-ALD (Alder) 5-1/4” H x 12” W x 1/2” Depth


ROYAL WOOD COLLECTION

PLAIN CORBELS & BRACKETS N EW

!

These ornaments are made of North American Hard Maple, Red Oak, Cherry, & Alder.

RWC900-S (Hard Maple) RWC900-S-OAK (Red Oak) RWC900-S-CH (Cherry) RWC900-S-ALD (Alder) 10” H x 1-7/8” W x 7” Depth

RWC905-S (Hard Maple) RWC905-S-OAK (Red Oak) RWC905-S-CH (Cherry) RWC905-S-ALD (Alder) 10” H x 1-7/8” W x 7” Depth

RWC900-M (Hard Maple) RWC900-M-OAK (Red Oak) RWC900-M-CH (Cherry) RWC900-M-ALD (Alder) 12” H x 2-1/2” W x 8” Depth

RWC905-M (Hard Maple) RWC905-M-OAK (Red Oak) RWC905-M-CH (Cherry) RWC905-M-ALD (Alder) 12” H x 2-1/2” W x 8” Depth

RWC900-L (Hard Maple) RWC900-L-OAK (Red Oak) RWC900-L-CH (Cherry) RWC900-L-ALD (Alder) 14” H x 3” W x 9” Depth

RWC905-L (Hard Maple) RWC905-L-OAK (Red Oak) RWC905-L-CH (Cherry) RWC905-L-ALD (Alder) 14” H x 3” W x 9” Depth

*Supplied with pre-attached keyhole hangers. RWC910-S (Hard Maple) RWC910-S-OAK (Red Oak) RWC910-S-CH (Cherry) RWC910-S-ALD (Alder) 10” H x 1-7/8” W x 7” Depth

RWC915-S (Hard Maple) RWC915-S-OAK (Red Oak) RWC915-S-CH (Cherry) RWC915-S-ALD (Alder) 10” H x 1-7/8” W x 7” Depth

RWC910-M (Hard Maple) RWC910-M-OAK (Red Oak) RWC910-M-CH (Cherry) RWC910-M-ALD (Alder) 12” H x 2-1/2” W x 8” Depth

RWC915-M (Hard Maple) RWC915-M-OAK(Red Oak) RWC915-M-CH (Cherry) RWC915-M-ALD (Alder) 12” H x 2-1/2” W x 8” Depth

RWC910-L (Hard Maple) RWC910-L-OAK (Red Oak) RWC910-L-CH (Cherry) RWC910-L-ALD (Alder) 14” H x 3” W x 9” Depth

RWC915-L (Hard Maple) RWC915-L-OAK (Red Oak) RWC915-L-CH (Cherry) RWC915-L-ALD (Alder) 14” H x 3” W x 9” Depth

RWC920-S (Hard Maple) RWC920-S-OAK (Red Oak) RWC920-S-CH (Cherry) RWC920-S-ALD (Alder) 10” H x 2-1/8” W x 7” Depth

RWC920-M (Hard Maple) RWC920-M-OAK (Red Oak) RWC920-M-CH (Cherry) RWC920-M-ALD (Alder) 12” H x 2-1/2” W x 8” Depth RWC920-L (Hard Maple) RWC920-L-OAK (Red Oak) RWC920-L-CH (Cherry) RWC920-L-ALD (Alder) 14” H x 3-1/4” W x 9” Depth

(Measurements are approximate)

J-513


ROYAL WOOD COLLECTION

PLAIN CORBELS & BRACKETS N EW

!

RWC925-S (Hard Maple) RWC925-S-OAK (Red Oak) RWC925-S-CH (Cherry) RWC925-S-ALD (Alder) 10” H x 2-1/2” W x 7” Depth

RWC925-M (Hard Maple) RWC925-M-OAK (Red Oak) RWC925-M-CH (Cherry) RWC925-M-ALD (Alder) 12” H x 3” W x 8” Depth RWC925-L (Hard Maple) RWC925-L-OAK (Red Oak) RWC925-L-CH (Cherry) RWC925-L-ALD (Alder) 14” H x 3-7/8” W x 9” Depth

These ornaments are made of North American Hard Maple, Red Oak, Cherry, & Alder.

RWC930-S (Hard Maple) RWC930-S-OAK (Red Oak) RWC930-S-CH (Cherry) RWC930-S-ALD (Alder) 10” H x 2-1/2” W x 7” Depth

RWC930-M (Hard Maple) RWC930-M-OAK (Red Oak) RWC930-M-CH (Cherry) RWC930-M-ALD (Alder) 12” H x 3” W x 8” Depth RWC930-L (Hard Maple) RWC930-L-OAK (Red Oak) RWC930-L-CH (Cherry) RWC930-L-ALD (Alder) 14” H x 3-5/8” W x 9” Depth

*Supplied with pre-attached keyhole hangers.

RWC935-S (Hard Maple) RWC935-S-OAK (Red Oak) RWC935-S-CH (Cherry) RWC935-S-ALD (Alder) 10” H x 2-3/8” W x 7” Depth

RWC935-M (Hard Maple) RWC935-M-OAK (Red Oak) RWC935-M-CH (Cherry) RWC935-M-ALD (Alder) 12” H x 2-5/8” W x 8” Depth RWC935-L (Hard Maple) RWC935-L-OAK (Red Oak) RWC935-L-CH (Cherry) RWC935-L-ALD (Alder) 14” H x 3-1/4” W x 9” Depth

RWC940-S (Hard Maple) RWC940-S-OAK (Red Oak) RWC940-S-CH (Cherry) RWC940-S-ALD (Alder) 10” H x 1-7/8” W x 7” Depth RWC940-M (Hard Maple) RWC940-M-OAK(Red Oak) RWC940-M-CH (Cherry) RWC940-M-ALD (Alder) 12” H x 2-1/2” W x 8” Depth

RWC940-L (Hard Maple) RWC940-L-OAK (Red Oak) RWC940-L-CH (Cherry) RWC940-L-ALD (Alder) 14” H x 3” W x 9” Depth

(Measurements are approximate)

J-514


ROYAL WOOD COLLECTION

PLAIN CORBELS & BRACKETS N EW

!

These ornaments are made of North American Hard Maple, Red Oak, Cherry, & Alder.

RWC945-S (Hard Maple) RWC945-S-OAK (Red Oak) RWC945-S-CH (Cherry) RWC945-S-ALD (Alder) 10” H x 2” W x 7” Depth

RWC945-M (Hard Maple) RWC945-M-OAK (Red Oak) RWC945-M-CH (Cherry) RWC945-M-ALD (Alder) 12” H x 2-1/2” W x 8” Depth RWC945-L (Hard Maple) RWC945-L-OAK (Red Oak) RWC945-L-CH (Cherry) RWC945-L-ALD (Alder) 14” H x 3” W x 9” Depth

*Supplied with pre-attached keyhole hangers. RWC950-S (Hard Maple) RWC950-S-OAK (Red Oak) RWC950-S-CH (Cherry) RWC950-S-ALD (Alder) 10” H x 2” W x 7” Depth

RWC950-M (Hard Maple) RWC950-M-OAK (Red Oak) RWC950-M-CH (Cherry) RWC950-M-ALD (Alder) 12” H x 2-1/2” W x 8” Depth RWC950-L (Hard Maple) RWC950-L-OAK (Red Oak) RWC950-L-CH (Cherry) RWC950-L-ALD (Alder) 14” H x 3” W x 9” Depth

RWC955-S (Hard Maple) RWC955-S-OAK (Red Oak) RWC955-S-CH (Cherry) RWC955-S-ALD (Alder) 10” H x 1-7/8” W x 7” Depth RWC955-M (Hard Maple) RWC955-M-OAK(Red Oak) RWC955-M-CH (Cherry) RWC955-M-ALD (Alder) 12” H x 2-1/2” W x 8” Depth

RWC955-L (Hard Maple) RWC955-L-OAK (Red Oak) RWC955-L-CH (Cherry) RWC955-L-ALD (Alder) 14” H x 3” W x 9” Depth

RWC960-S (Hard Maple) RWC960-S-OAK (Red Oak) RWC960-S-CH (Cherry) RWC960-S-ALD (Alder) 10” H x 2” W x 7” Depth

RWC960-M (Hard Maple) RWC960-M-OAK (Red Oak) RWC960-M-CH (Cherry) RWC960-M-ALD (Alder) 12” H x 2-1/2” W x 8” Depth RWC960-L (Hard Maple) RWC960-L-OAK (Red Oak) RWC960-L-CH (Cherry) RWC960-L-ALD (Alder) 14” H x 3-1/8” W x 9” Depth

(Measurements are approximate)

J-515


ROYAL WOOD COLLECTION

BRACKETS & CORBELS

These ornaments are made of North American Hard Maple, Red Oak, Cherry & Alder.

RWC90-S (Hard Maple) RWC90-S-OAK (Red Oak) RWC90-S-CH (Cherry) 8” H x 1-1/4” W x 4-3/4” Depth SAME DESIGN ON BOTH SIDES

*RWC58-S (Hard Maple) *RWC58-S-OAK (Red Oak) *RWC58-S-CH (Cherry) 7-1/2” H x 1-5/8” W x 4-5/8” Depth *RWC58-M (Hard Maple) *RWC58-M-OAK (Red Oak) *RWC58-M-CH (Cherry) 10-3/4” H x 2” W x 6-1/2” Depth

RWC90-M (Hard Maple) RWC90-M-OAK (Red Oak) RWC90-M-CH (Cherry) 10-7/8” H x 1-1/2” W x 6-3/8” Depth SAME DESIGN ON BOTH SIDES

*RWC58-L (Hard Maple) *RWC58-L-OAK (Red Oak) *RWC58-L-CH (Cherry) 12-3/8” H x 2-1/2” W x 7-1/2” Depth

RWC90-L (Hard Maple) RWC90-L-OAK (Red Oak) RWC90-L-CH (Cherry) 12-1/2” H x 1-7/8” W x 7-1/2” Depth SAME DESIGN ON BOTH SIDES

*Supplied with pre-attached keyhole hangers.

*RWC328-S (Hard Maple) *RWC328-S-OAK (Red Oak) *RWC328-S-CH (Cherry) *RWC328-S-ALD (Alder) 8” H x 3-5/8” W x 2-1/2” Depth

*RWC328-M (Hard Maple) *RWC328-M-OAK (Red Oak) *RWC328-M-CH (Cherry) *RWC328-M-ALD (Alder) 10-1/2” H x 5” W x 3-1/4” Depth *RWC328-L (Hard Maple) *RWC328-L-OAK (Red Oak) *RWC328-L-CH (Cherry) *RWC328-L-ALD (Alder) 13” H x 5-7/8” W x 3-1/4” Depth

*RWC52-S (Hard Maple) *RWC52-S-OAK (Red Oak) *RWC52-S-CH (Cherry) 6” H x 1-3/4” W x 4-1/2” Depth *RWC52-M (Hard Maple) *RWC52-M-OAK(Red Oak) *RWC52-M-CH (Cherry) 9” H x 2” W x 6-3/4” Depth

*RWC52-L (Hard Maple) *RWC52-L-OAK (Red Oak) *RWC52-L-CH (Cherry) 10-3/4” H x 2-1/2” W x 8-1/8” Depth

(Measurements are approximate)

J-516


ROYAL WOOD COLLECTION

CORBELS

These ornaments are made of North American Hard Maple, Red Oak, Cherry & Alder.

*RWC318-XS (Hard Maple) *RWC318-XS-OAK (Red Oak) *RWC318-XS-CH (Cherry) *RWC318-XS-ALD (Alder) 5” H x 2-7/8” W x 2-7/8” Depth

*RWC322-S (Hard Maple) *RWC322-S-OAK (Red Oak) *RWC322-S-CH (Cherry) *RWC322-S-ALD (Alder) 8” H x 2-1/2” W x 5-1/4” Depth

*RWC318-S (Hard Maple) *RWC318-S-OAK (Red Oak) *RWC318-S-CH (Cherry) *RWC318-S-ALD (Alder) 8” H x 3-7/8” W x 3-7/8” Depth

*RWC322-M (Hard Maple) *RWC322-M-OAK (Red Oak) *RWC322-M-CH (Cherry) *RWC322-M-ALD (Alder) 11” H x 3-1/2” W x 7-1/4” Depth

*RWC318-M (Hard Maple) *RWC318-M-OAK (Red Oak) *RWC318-M-CH (Cherry) *RWC318-M-ALD (Alder) 10-1/2” H x 4-7/8” W x 4-7/8” Depth

*RWC322-L (Hard Maple) *RWC322-L-OAK (Red Oak) *RWC322-L-CH (Cherry) *RWC322-L-ALD (Alder) 13” H x 4” W x 8-1/2” Depth

*RWC318-L (Hard Maple) *RWC318-L-OAK (Red Oak) *RWC318-L-CH (Cherry) *RWC318-L-ALD (Alder) 13” H x 5-1/4” W x 5-1/4” Depth

*Supplied with pre-attached keyhole hangers.

*RWC318-XL (Hard Maple) *RWC318-XL-OAK (Red Oak) *RWC318-XL-CH (Cherry) *RWC318-XL-ALD (Alder) 15” H x 6” W x 6” Depth

*RWC325-S (Hard Maple) *RWC325-S-OAK (Red Oak) *RWC325-S-CH (Cherry) 11” H x 3-1/2” W x 7-1/4” Depth

*RWC319-S (Hard Maple) *RWC319-S-OAK (Red Oak) *RWC319-S-CH (Cherry) *RWC319-S-ALD (Alder) 8” H x 3-5/8” W x 2-3/8” Depth

*RWC325-L (Hard Maple) *RWC325-L-OAK (Red Oak) *RWC325-L-CH (Cherry) 13” H x 4” W x 8-1/2” Depth

*RWC319-M (Hard Maple) *RWC319-M-OAK (Red Oak) *RWC319-M-CH (Cherry) *RWC319-M-ALD (Alder) 10-1/2” H x 5” W x 3-1/4” Depth *RWC319-L (Hard Maple) *RWC319-L-OAK (Red Oak) *RWC319-L-CH (Cherry) *RWC319-L-ALD (Alder) 13” H x 5-1/2” W x 3-3/4” Depth

N EW

!

*RWC320-S (Hard Maple) *RWC320-S-OAK (Red Oak) *RWC320-S-CH (Cherry) *RWC320-S-ALD (Alder) 8” H x 2-1/2” W x 5-1/4” Depth

*RWC320-M (Hard Maple) *RWC320-M-OAK (Red Oak) *RWC320-M-CH (Cherry) *RWC320-M-ALD (Alder) 11” H x 3-1/2” W x 7-1/4” Depth *RWC320-L (Hard Maple) *RWC320-L-OAK (Red Oak) *RWC320-L-CH (Cherry) *RWC320-L-ALD (Alder) 13” H x 4” W x 9” Depth

RWC346-S (Hard Maple) RWC346-S-OAK (Red Oak) RWC346-S-CH (Cherry) 13” H x 4-1/8” W x 3-3/4” Depth RWC346-M (Hard Maple) RWC346-M-OAK (Red Oak) RWC346-M-CH (Cherry) 20” H x 5-1/2” W x 5-7/8” Depth RWC346-L (Hard Maple) RWC346-L-OAK (Red Oak) RWC346-L-CH (Cherry) 26-1/2” H x 6-3/8” W x 7-3/4” Depth

(Measurements are approximate)

J-517


ROYAL WOOD COLLECTION

CORBELS

These ornaments are made of North American Hard Maple, Red Oak, Cherry & Alder.

*RWC39-S (Hard Maple) *RWC39-S-OAK (Red Oak) *RWC39-S-CH (Cherry) *RWC39-S-ALD (Alder) 8-1/4” H x 3-3/4” W x 2-5/8” Depth

*RWC39-M (Hard Maple) *RWC39-M-OAK (Red Oak) *RWC39-M-CH (Cherry) *RWC39-M-ALD (Alder) 10-1/2” H x 4-7/8” W x 3-1/2” Depth *RWC39-L (Hard Maple) *RWC39-L-OAK (Red Oak) *RWC39-L-CH (Cherry) *RWC39-L-ALD (Alder) 13” H x 5-3/8” W x 4-1/2” Depth

*Supplied with pre-attached keyhole hangers.

*RWC37-XS (Hard Maple) *RWC37-XS-OAK (Red Oak) *RWC37-XS-CH (Cherry) *RWC37-XS-ALD (Alder) 4-3/4” H x 2-7/8” W x 2-5/8” Depth *RWC37-S (Hard Maple) *RWC37-S-OAK (Red Oak) *RWC37-S-CH (Cherry) *RWC37-S-ALD (Alder) 7-1/8” H x 3-5/8” W x 3-5/8” Depth

*RWC37-M (Hard Maple) *RWC37-M-OAK (Red Oak) *RWC37-M-CH (Cherry) *RWC37-M-ALD (Alder) 10-1/2” H x 4-7/8” W x 5-1/4” Depth *RWC37-L (Hard Maple) *RWC37-L-OAK (Red Oak) *RWC37-L-CH (Cherry) *RWC37-L-ALD (Alder) 12-1/2” H x 5-3/8” W x 5-5/8” Depth RWC37-XL (Hard Maple) *RWC37-XL-OAK (Red Oak) *RWC37-XL-CH (Cherry) *RWC37-XL-ALD (Alder) 14-1/2” H x 5-3/4” W x 6-5/8” Depth *RWC37-XXL (Hard Maple) *RWC37-XXL-OAK (Red Oak) *RWC37-XXL-CH (Cherry) *RWC37-XXL-ALD (Alder) 26-1/2” H x 8-1/4” W x 8-3/4” Depth *RWC37-XXXL (Hard Maple) *RWC37-XXXL-OAK (Red Oak) *RWC37-XXXL-CH (Cherry) 36” H x 10” W x 11-3/8” Depth

N EW

!

*RWC37-BASE36 (Hard Maple) *RWC37-BASE36-OAK (Red Oak) *RWC37-BASE36-CH (Cherry) *RWC37-BASE36-ALD (Alder) 36” H x 7” W x 7-1/2” Depth *RWC37-BASE42 (Hard Maple) *RWC37-BASE42-OAK (Red Oak) *RWC37-BASE42-CH (Cherry) *RWC37-BASE42-ALD (Alder) 42” H x 7-1/2” W x 8” Depth

(Measurements are approximate)

J-518


ROYAL WOOD COLLECTION

CORBELS

These ornaments are made of North American Hard Maple, Red Oak, Cherry & Alder.

*RWC57-S (Hard Maple) *RWC57-S-OAK (Red Oak) *RWC57-S-CH (Cherry) *RWC57-S-ALD (Alder) 8” H x 2” W x 4-3/4” Depth

*RWC54-S (Hard Maple) *RWC54-S-OAK (Red Oak) *RWC54-S-CH (Cherry) *RWC54-S-ALD (Alder) 10-1/2” H x 3-3/8” W x 6-1/2” Depth

*RWC57-M (Hard Maple) *RWC57-M-OAK (Red Oak) *RWC57-M-CH (Cherry) *RWC57-M-ALD (Alder) 10-13/16” H x 2-1/8” W x 6-11/16” Depth

*RWC54-L (Hard Maple) *RWC54-L-OAK (Red Oak) *RWC54-L-CH (Cherry) *RWC54-L-ALD (Alder) 13-1/4” H x 3-7/8” x 8-1/4” Depth

*RWC57-L (Hard Maple) *RWC57-L-OAK (Red Oak) *RWC57-L-CH (Cherry) *RWC57-L-ALD (Alder) 12-3/8” H x 2-7/8” W x 7-3/8” Depth

*RWC307-XS (Hard Maple) *RWC307-XS-OAK (Red Oak) *RWC307-XS-CH (Cherry) 5” H x 2-3/4” W x 2-3/8” Depth

*RWC307-S (Hard Maple) *RWC307-S-OAK (Red Oak) *RWC307-S-CH (Cherry) 7-1/4” H x 3-1/2” W x 3-3/8” Depth

*RWC313-S (Hard Maple) *RWC313-S-OAK (Red Oak) *RWC313-S-CH (Cherry) 11” H x 3-1/2” W x 6-3/4” Depth

*RWC307-L (Hard Maple) *RWC307-L-OAK (Red Oak) *RWC307-L-CH (Cherry) 12-1/2” H x 5-1/4” W x 5-3/8” Depth

*RWC313-L (Hard Maple) *RWC313-L-OAK (Red Oak) *RWC313-L-CH (Cherry) 13-1/4” H x 4” W x 8-1/4” Depth

*RWC307-XL (Hard Maple) *RWC307-XL-OAK (Red Oak) *RWC307-XL-CH (Cherry) 14-1/2” H x 6” W x 6-1/8” Depth

*Supplied with pre-attached keyhole hangers.

*RWC316-M (Hard Maple) *RWC316-M-OAK (Red Oak) *RWC316-M-CH (Cherry) 11” H x 3-1/2” W x 6-3/4” Depth

*RWC310-M (Hard Maple) *RWC310-M-OAK (Red Oak) *RWC310-M-CH (Cherry) 10-1/2” H x 4-7/8” W x 3-1/4” Depth

*RWC316-L (Hard Maple) *RWC316-L-OAK (Red Oak) *RWC316-L-CH (Cherry) 13-1/4” H x 4” W x 8-1/4” Depth

(Measurements are approximate)

J-519


ROYAL WOOD COLLECTION

CORBELS

These ornaments are made of North American Hard Maple, Red Oak, Cherry & Alder.

*RWC40-XS (Hard Maple) *RWC40-XS-OAK(Red Oak) *RWC40-XS-CH (Cherry) 6-7/8” H x 3-1/8” W x 3-1/2” Depth

*RWC40-S (Hard Maple) *RWC40-S-OAK(Red Oak) *RWC40-S-CH (Cherry) 10-1/4” H x 5-1/8” W x 4-7/8” Depth

*RWC07-S (Hard Maple) *RWC07-S-OAK (Red Oak) *RWC07-S-CH (Cherry) 8 H x 3-7/8” W x 2-3/4” Depth

*RWC40-M (Hard Maple) *RWC40-M-OAK(Red Oak) *RWC40-M-CH (Cherry) 12-3/8” H x 5” W x 5-3/8” Depth

*RWC07-M (Hard Maple) *RWC07-M-OAK (Red Oak) *RWC07-M-CH (Cherry) 10-1/8” H x5” W x 3-1/2” Depth

*RWC40-L (Hard Maple) *RWC40-L-OAK(Red Oak) *RWC40-L-CH (Cherry) 14-1/4” H x 5-1/8” W x 5-1/2” Depth

*RWC40-XL (Hard Maple) *RWC40-XL-OAK(Red Oak) *RWC40-XL-CH (Cherry) 26-1/2” H x 7-3/8” W x 8-1/2” Depth

*Supplied with pre-attached keyhole hangers.

*RWC07-L (Hard Maple) *RWC07-L-OAK (Red Oak) *RWC07-L-CH (Cherry) 12-5/8” H x 6-3/8” W x 4-1/2” Depth

*RWC56-S (Hard Maple) *RWC56-S-OAK (Red Oak) *RWC56-S-CH (Cherry) 10-1/2” H x 3-1/4” W x 6-3/4” Depth *RWC56-L (Hard Maple) *RWC56-L-OAK (Red Oak) *RWC56-L-CH (Cherry) 13-1/4” H x 3-3/4” W x 8-3/8” Depth

*RWC55-S (Hard Maple) *RWC55-S-OAK(Red Oak) *RWC55-S-CH (Cherry) 7-1/2” H x 1-3/4” W x 4-1/2” Depth

*RWC55-M (Hard Maple) *RWC55-M-OAK(Red Oak) *RWC55-M-CH (Cherry) 10-5/8” H x 2-1/8” W x 6-3/4” Depth

*RWC55-L (Hard Maple) *RWC55-L-OAK (Red Oak) *RWC55-L-CH (Cherry) 12-3/8” H x 2-1/2” W x 7-5/8” Depth

J-520

(Measurements are approximate)


ROYAL WOOD COLLECTION

CORBELS

These ornaments are made of North American Hard Maple, Red Oak, Cherry & Alder.

*RWC53-S (Hard Maple) *RWC53-S-OAK (Red Oak) *RWC53-S-CH (Cherry) 10-5/8” H x 3-3/4” W x 6-1/2” Depth

*RWC47-XS (Hard Maple) *RWC47-XS-OAK (Red Oak) *RWC47-XS-CH (Cherry) 8” H x 3-7/8” W x 4” Depth

*RWC53-L (Hard Maple) *RWC53-L-OAK (Red Oak) *RWC53-L-CH (Cherry) 13-1/8” H x 4” W x 8-1/4” Depth

*RWC47-S (Hard Maple) *RWC47-S-OAK (Red Oak) *RWC47-S-CH (Cherry) 10-1/2” H x 5-1/8” W x 5-1/4” Depth *RWC47-M (Hard Maple) *RWC47-M-OAK (Red Oak) *RWC47-M-CH (Cherry) 12” H x 5” W x 5-3/4” Depth

*RWC47-L (Hard Maple) *RWC47-L-OAK (Red Oak) *RWC47-L-CH (Cherry) 14-1/4” H x 5-1/2” W x 7” Depth

RWC53-S (see above) *RWC47-XL (Hard Maple) *RWC47-XL-OAK (Red Oak) *RWC47-XL-CH (Cherry) 26-1/2” H x 7-3/8” W x 8-3/8” Depth

C1147 (see page 541)

RWC02-S (see page 504)

*RWC51-XS (Hard Maple) *RWC51-XS-OAK (Red Oak) *RWC51-XS-CH (Cherry) 3-1/2” H x 1-7/8” W x 1-7/8” Depth

*Supplied with pre-attached keyhole hangers.

*RWC51-M (Hard Maple) *RWC51-M-OAK (Red Oak) *RWC51-M-CH (Cherry) 7-1/2” H x 4-1/2” W x 4-1/4” Depth

*RWC51-XL (Hard Maple) *RWC51-XL-OAK (Red Oak) *RWC51-XL-CH (Cherry) 10-7/8” H x 6-1/2” W x 6-3/8” Depth

*RWC51-S (Hard Maple) *RWC51-S-OAK (Red Oak) *RWC51-S-CH (Cherry) 5-7/8” H x 3-1/2” W x 3-5/8” Depth *RWC51-L (Hard Maple) *RWC51-L-OAK (Red Oak) *RWC51-L-CH (Cherry) 9-5/8” H x 5-3/4” W x 5-3/8” Depth

(Measurements are approximate)

J-521


ROYAL WOOD COLLECTION

CORBELS

These ornaments are made of North American Hard Maple, Red Oak, Cherry & Alder.

RWC364-S (Hard Maple) RWC364-S-OAK (Red Oak) RWC364-S-CH (Cherry) RWC364-S-ALD (Alder) 2-7/8” H x 2” W x 1” Depth

*RWC34-S (Hard Maple) *RWC34-S-OAK (Red Oak) *RWC34-S-CH (Cherry) 7-5/8” H x 3-7/8” W x 3-3/4” Depth *RWC34-L (Hard Maple) *RWC34-L-OAK (Red Oak) *RWC34-L-CH (Cherry) 9-5/8” H x 6-3/4” W x 6-1/4” Depth

RWC364-L (Hard Maple) RWC364-L-OAK (Red Oak) RWC364-L-CH (Cherry) RWC364-L-ALD (Alder) 4-1/8” H x 2” W x 1-3/8” Depth

*RWC46-S (Hard Maple) *RWC46-S-OAK (Red Oak) *RWC46-S-CH (Cherry) 5” H x 3-1/2” W x 1-3/4” Depth

*RWC46-M (Hard Maple) *RWC46-M-OAK (Red Oak) *RWC46-M-CH (Cherry) 6-3/8” H x 4-5/8” W x 2-3/8” Depth

*RWC43-S (Hard Maple) *RWC43-S-OAK (Red Oak) *RWC43-S-CH (Cherry) 4-3/8” H x 3-1/2” W x 1-3/4” Depth

*RWC46-L (Hard Maple) *RWC46-L-OAK (Red Oak) *RWC46-L-CH (Cherry) 7-3/4” H x 5-1/2” W x 2-7/8” Depth

*RWC43-M (Hard Maple) *RWC43-M-OAK (Red Oak) *RWC43-M-CH (Cherry) 5-1/2” H x 4-1/2” W x 2-1/4” Depth *RWC43-L(Hard Maple) *RWC43-L-OAK(Red Oak) *RWC43-L-CH (Cherry) 6-3/4” H x 5-1/2” W x 2-3/4” Depth

*RWC50-S (Hard Maple) *RWC50-S-OAK (Red Oak) *RWC50-S-CH (Cherry) 4” H x 2-3/4” W x 2-1/4” Depth *RWC50-L (Hard Maple) *RWC50-L-OAK (Red Oak) *RWC50-L-CH (Cherry) 8” H x 5-1/2” W x 4-3/8” Depth *RWC50-M (Hard Maple) *RWC50-M-OAK (Red Oak) *RWC50-M-CH (Cherry) 6-1/4” H x 4-1/4” W x 3-3/8” Depth *RWC50-XL (Hard Maple) *RWC50-XL-OAK (Red Oak) *RWC50-XL-CH (Cherry) 10-7/8” H x 7” W x 6-1/4” Depth

(Measurements are approximate)

J-522

*Supplied with pre-attached keyhole hangers.

*RWC06-S (Hard Maple) *RWC06-S-OAK (Red Oak) *RWC06-S-CH (Cherry) 4” H x 2-7/8” W x 1-1/2” Depth *RWC06-M (Hard Maple) *RWC06-M-OAK (Red Oak) *RWC06-M-CH (Cherry) 5-3/8” H x 3-3/4” W x 2” Depth

*RWC06-L (Hard Maple) *RWC06-L-OAK (Red Oak) *RWC06-L-CH (Cherry) 6-5/8” H x 4-5/8” W x 2-1/2” Depth


ROYAL WOOD COLLECTION

CORBELS

These ornaments are made of North American Hard Maple, Red Oak, Cherry & Alder.

*RWC349-XS (Hard Maple) *RWC349-XS-OAK (Red Oak) *RWC349-XS-CH (Cherry) *RWC349-XS-ALD (Alder) 8” H x 3-3/4” W x 2-1/2” Depth

*RWC349-S (Hard Maple) *RWC349-S-OAK (Red Oak) *RWC349-S-CH (Cherry) *RWC349-S-ALD (Alder) 10” H x 4-1/2” W x 3-1/4” Depth

*RWC349-L (Hard Maple) *RWC349-L-OAK (Red Oak) *RWC349-L-CH (Cherry) *RWC349-L-ALD (Alder) 12-1/4” H x 5-3/8” W x 3-7/8” Depth *RWC349-XL (Hard Maple) *RWC349-XL-OAK (Red Oak) *RWC349-XL-CH (Cherry) *RWC349-XL-ALD (Alder) 14-5/8” H x 6-3/8” W x 4-5/8” Depth

RWC358-S (Hard Maple) RWC358-S-OAK (Red Oak) RWC358-S-CH (Cherry) 4-7/8” H x 2-1/2” W x 1-3/8” Depth RWC358-L (Hard Maple) RWC358-L-OAK (Red Oak) RWC358-L-CH (Cherry) 6-3/4” H x 3-5/8” W x 2” Depth

*Supplied with pre-attached keyhole hangers.

*RWC349-XXL (Hard Maple) *RWC349-XXL-OAK (Red Oak) *RWC349-XXL-CH (Cherry) *RWC349-XXL-ALD (Alder) 18” H x 7-1/2” W x 5-1/2” Depth

*RWC361-S (Hard Maple) *RWC361-S-OAK (Red Oak) *RWC361-S-CH (Cherry) *RWC361-S-ALD (Alder) 6-1/8” H x 3-1/8” W x 1-7/8” Depth

*RWC361-L (Hard Maple) *RWC361-L-OAK (Red Oak) *RWC361-L-CH (Cherry) *RWC361-L-ALD (Alder) 9-1/8” H x 4-5/8” W x 2-3/4” Depth

*RWC352-S (Hard Maple) *RWC352-S-OAK (Red Oak) *RWC352-S-CH (Cherry) 8” H x 3-3/8” W x 2-1/2” Depth

*RWC352-M (Hard Maple) *RWC352-M-OAK (Red Oak) *RWC352-M-CH (Cherry) 10-1/2” H x 4-7/8” W x 3-1/4” Depth *RWC352-L (Hard Maple) *RWC352-L-OAK (Red Oak) *RWC352-L-CH (Cherry) 13” H x 5-1/2” W x 4” Depth

*RWC337-S (Hard Maple) *RWC337-S-OAK (Red Oak) *RWC337-S-CH (Cherry) 8” H x 4” W x 8” Depth

*RWC337-M (Hard Maple) *RWC337-M-OAK (Red Oak) *RWC337-M-CH (Cherry) 10” H x 5” W x 10” Depth

(Measurements are approximate)

J-523


ROYAL WOOD COLLECTION

CORBELS

These ornaments are made of North American Hard Maple, Red Oak, Cherry & Alder.

*RWC304-S (Hard Maple) *RWC304-S-OAK (Red Oak) *RWC304-S-CH (Cherry) *RWC304-S-ALD (Alder) 8” H x 2-1/2” W x 5” Depth

*RWC301-S (Hard Maple) *RWC301-S-OAK (Red Oak) *RWC301-S-CH (Cherry) 8” H x 2-1/2” W x 5” Depth

*RWC301-M (Hard Maple) *RWC301-M-OAK (Red Oak) *RWC301-M-CH (Cherry) 11” H x 3-1/2” W x 7-1/8” Depth

*RWC304-M (Hard Maple) *RWC304-M-OAK (Red Oak) *RWC304-M-CH (Cherry) *RWC304-M-ALD (Alder) 11” H x 3-1/2” W x 7-1/8” Depth

*RWC301-L (Hard Maple) *RWC301-L-OAK (Red Oak) *RWC301-L-CH (Cherry) 13” H x 4-3/4” W x 8-1/2” Depth

*RWC304-L (Hard Maple) *RWC304-L-OAK (Red Oak) *RWC304-L-CH (Cherry) *RWC304-L-ALD (Alder) 13” H x 4” W x 8-1/2” Depth

Acanthus Leaf RWC367-S (Hard Maple) RWC367-S-OAK (Red Oak) RWC367-S-CH (Cherry) 6-1/4” H x 2-7/8” W x 5” Projection

RWC367-M (Hard Maple) RWC367-M-OAK (Red Oak) RWC367-M-CH (Cherry) 8-3/8” H x 3-3/4” W x 6-5/8” Projection

*Supplied with pre-attached keyhole hangers.

RWC367-L (Hard Maple) RWC367-L-OAK (Red Oak) RWC367-L-CH (Cherry) 10” H x 4-1/2” W x 7-7/8” Projection

Surface

Projection

Height

NOTE: PLEASE af style le ew To vi 5, see 35 C of #RW 7. #RWC36

W” D”

Width

Acanthus Leaf w/Bracket *RWC355-S (Hard Maple) *RWC355-S-OAK (Red Oak) *RWC355-S-CH (Cherry) 8-1/4” H x 5” W x 6-3/4” Depth

*RWC355-M (Hard Maple) *RWC355-M-OAK (Red Oak) *RWC355-M-CH (Cherry) 10-3/4” H x 6-1/4” W x 8-5/8” Depth *RWC355-L (Hard Maple) *RWC355-L-OAK (Red Oak) *RWC355-L-CH (Cherry) 12-1/2” H x 7” W x 10” Depth

Corner Brackets *RWC36-S (Hard Maple) *RWC36-S-OAK (Red Oak) *RWC36-S-CH (Cherry) 8-1/4” H x 5-1/4” W x 5-1/2” Depth

*RWC36-L (Hard Maple) *RWC36-L-OAK (Red Oak) *RWC36-L-CH (Cherry) 11-3/4” H x 10-1/2” W x 7-1/2” Depth

(Measurements are approximate)

J-524


ROYAL WOOD COLLECTION

CORBELS

These ornaments are made of North American Hard Maple, Red Oak, Cherry & Alder.

*RWC41-XS (Hard Maple) *RWC41-XS-OAK (Red Oak) *RWC41-XS-CH (Cherry) *RWC41-XS-ALD (Alder) 6-3/4” H x 3-3/8” W x 3-3/4” Depth *RWC41-S (Hard Maple) *RWC41-S-OAK (Red Oak) *RWC41-S-CH (Cherry) *RWC41-S-ALD (Alder) 10” H x 4-3/4” W x 5-3/8” Depth

*RWC41-M (Hard Maple) *RWC41-M-OAK (Red Oak) *RWC41-M-CH (Cherry) *RWC41-M-ALD (Alder) 12-1/2” H x 5-1/8” W x 5-3/8” Depth *RWC41-L (Hard Maple) *RWC41-L-OAK (Red Oak) *RWC41-L-CH (Cherry) *RWC41-L-ALD (Alder) 14-3/8” H x 5-3/4” W x 5-5/8” Depth *RWC41-XL (Hard Maple) *RWC41-XL-OAK (Red Oak) *RWC41-XL-CH (Cherry) *RWC41-XL-ALD (Alder) 26-1/2” H x 7-3/8” W x 8-1/2” Depth *RWC41-XXL (Hard Maple) *RWC41-XXL-OAK (Red Oak) *RWC41-XXL-CH (Cherry) 36” H x 10” W x 11-1/4” Depth

*Supplied with pre-attached keyhole hangers.

N EW

*RWC42-XS (Hard Maple) *RWC42-XS-OAK (Red Oak) *RWC42-XS-CH (Cherry) 8” H x 3-7/8” W x 3-7/8” Depth

*RWC42-S (Hard Maple) *RWC42-S-OAK (Red Oak) *RWC42-S-CH (Cherry) 10-1/2” H x 5-1/8” W x 5-1/4” Depth *RWC42-M (Hard Maple) *RWC42-M-OAK (Red Oak) *RWC42-M-CH (Cherry) 12-3/8” H x 5-1/8” W x 5-1/4” Depth *RWC42-L (Hard Maple) *RWC42-L-OAK (Red Oak) *RWC42-L-CH (Cherry) 14-1/4” H x 5-1/2” W x 6-5/8” Depth

!

*RWC41-BASE36 (Hard Maple) *RWC41-BASE36-OAK (Red Oak) *RWC41-BASE36-CH (Cherry) *RWC41-BASE36-ALD (Alder) 36” H x 7” W x 7-1/2” Depth *RWC41-BASE42 (Hard Maple) *RWC41-BASE42-OAK (Red Oak) *RWC41-BASE42-CH (Cherry) *RWC41-BASE42-ALD (Alder) 42” H x 7-1/2” W x 8” Depth

(Measurements are approximate)

J-525


ROYAL WOOD COLLECTION

CORBELS

These ornaments are made of North American Hard Maple, Red Oak, Cherry & Alder.

*RWC48-XS (Hard Maple) *RWC48-XS-OAK (Red Oak) *RWC48-XS-CH (Cherry) *RWC48-XS-ALD (Alder) 7-1/8” H x 2-3/8” W x 1-3/8” Depth

*RWC48-S (Hard Maple) *RWC48-S-OAK (Red Oak) *RWC48-S-CH (Cherry) *RWC48-S-ALD (Alder) 11-1/4” H x 4-3/8” W x 2-1/4” Depth

*RWC48-M (Hard Maple) *RWC48-M-OAK (Red Oak) *RWC48-M-CH (Cherry) *RWC48-M-ALD (Alder) 15-3/8” H x 5-7/8” W x 2-5/8” Depth

*RWC03-S (Hard Maple) *RWC03-S-OAK (Red Oak) *RWC03-S-CH (Cherry) 8” H x 4-1/4” W x 3-3/8” Depth

*RWC03-M (Hard Maple) *RWC03-M-OAK (Red Oak) *RWC03-M-CH (Cherry) 10” H x 5-3/8” W x 4-3/8” Depth

*RWC03-L (Hard Maple) *RWC03-L-OAK (Red Oak) *RWC03-L-CH (Cherry) 12-1/2” H x 6-3/4” W x 5-1/8” Depth *RWC03-XL (Hard Maple) *RWC03-XL-OAK (Red Oak) *RWC03-XL-CH (Cherry) 14-3/4” H x 7-7/8” W x 6-1/8” Depth

FOR THIS DESIGN IN RESIN, SEE PAGE 542.

*RWC48-L (Hard Maple) *RWC48-L-OAK(Red Oak) *RWC48-L-CH (Cherry) *RWC48-L-ALD (Alder) 24” H x 6-7/8” W x 3-1/2” Depth

*Supplied with pre-attached keyhole hangers.

*RWC48-XL (Hard Maple) *RWC48-XL-OAK(Red Oak) *RWC48-XL-CH (Cherry) *RWC48-XL-ALD (Alder) 35-7/8” H x 8-1/2” W x 4-1/2” Depth

*RWC331-S (Hard Maple) *RWC331-S-OAK (Red Oak) *RWC331-S-CH (Cherry) *RWC331-S-ALD (Alder) 10-1/8” H x 3-1/8” W x 2-5/8” Depth *RWC331-XL (Hard Maple) *RWC331-XL-OAK (Red Oak) *RWC331-XL-CH (Cherry) *RWC331-XL-ALD (Alder) 24” H x 7-1/8” W x 6” Depth

*RWC331-XXL (Hard Maple) *RWC331-XXL-OAK (Red Oak) *RWC331-XXL-CH (Cherry) *RWC331-XXL-ALD (Alder) 36” H x 10-3/4” W x 9” Depth

(Measurements are approximate)

J-526

*RWC331-M (Hard Maple) *RWC331-M-OAK (Red Oak) *RWC331-M-CH (Cherry) *RWC331-M-ALD (Alder) 12” H x 3-5/8” W x 3-1/4” Depth *RWC331-L (Hard Maple) *RWC331-L-OAK (Red Oak) *RWC331-L-CH (Cherry) *RWC331-L-ALD (Cherry) 14” H x 4-3/8” W x 3-3/4” Depth


ROYAL WOOD COLLECTION

CAPITALS

These ornaments are made of North American Hard Maple, Red Oak, Cherry & Alder. RWC119-S (Hard Maple) RWC119-S-OAK (Red Oak) RWC119-S-CH (Cherry) RWC119-S-ALD (Alder) 4” H x 3-7/8” W x 1” Depth 2-3/4" Collar

RWC116-S (Hard Maple) RWC116-S-OAK (Red Oak) RWC116-S-CH (Cherry) 3” H x 6-7/8” W x 1-5/8” Depth 2-3/4" Collar

RWC119-M (Hard Maple) RWC119-M-OAK (Red Oak) RWC119-M-CH (Cherry) RWC119-M-ALD (Alder) 5-3/8” H x 5-1/4” W x 1-1/8” Depth 3-3/4" Collar

(Hard Maple) * RWC119-L (Red Oak) * RWC119-L-OAK (Cherry) * RWC119-L-CH (Alder) * RWC119-L-ALD 6-1/4” H x 6-1/8” W x 1-1/4” Depth (Hard Maple) * RWC119-XL (Red Oak) * RWC119-XL-OAK (Cherry) * RWC119-XL-CH (Alder) * RWC119-XL-ALD 8-1/8” H x 8-1/8” W x 1-5/8” Depth

(Measurements are approximate)

* * *

RWC116-M (Hard Maple) RWC116-M-OAK (Red Oak) RWC116-M-CH (Cherry) 4” H x 9-1/4” W x 2” Depth 3-3/4" Collar wRWC116-L (Hard Maple) RWC116-L-OAK (Red Oak) RWC116-L-CH (Cherry 4-5/8” H x 10-3/8” W x 2-3/8” Depth

RWC113-S (Hard Maple) RWC113-S-OAK (Red Oak) RWC113-S-CH (Cherry) RWC113-S-ALD (Alder) 5-1/2” H x 3-1/4” W x 1” Depth 2-3/4" Collar

RWC113-L (Hard Maple) RWC113-L-OAK (Red Oak) RWC113-L-CH (Cherry) RWC113-L-ALD (Alder) 7-1/2” H x 4-1/2” W x 1-1/4” Depth 3-3/4" Collar RWC122-S (Hard Maple) RWC122-S-OAK (Red Oak) RWC122-S-CH (Cherry) 3-3/8” H x 4-1/8” W x 1-3/8” Depth 2-3/4" Collar RWC122-L (Hard Maple) RWC122-L-OAK (Red Oak) RWC122-L-CH (Cherry) 4-3/4” H x 5-5/8” W x 1-3/4” Depth 3-3/4" Collar

ROSETTES

7/8” x 3-1/2” x 3-1/2” ADM850-PG

7/8” x 4-1/2” x 4-1/2” ADM803-PG

ADM801-RO

ADM850-RO

ADM803-RO

ADM801-MP

ADM850-MP

ADM803-MP

(fluted)

applique with

accommodate filler mouldings.

3/4” x 2-3/4” x 2-3/4” ADM801-PG

ACCOMODATES 2-3/4” COLLARS

RWC119

* These items do not

RWC119

applique with

ADM150

filler moulding (fluted side shown)

FILLER MOULDINGS (beaded)

13/16” x 2-1/4”, no design repeat (two sided - one fluted, one beaded) ADM149-POP ADM149-RO ADM149-MP

- 8 Ft. Lengths

ADM149

filler moulding (beaded side shown)

(fluted)

ACCOMODATES 3-3/4” COLLARS.

(beaded)

13/16” x 3-1/4”, no design repeat (two sided - one fluted, one beaded) ADM150-POP ADM150-RO ADM150-MP

J-527


ROYAL WOOD COLLECTION CUSTOM CARVED WOOD PROGRAM Take Advantage of our AFFORDABLE CUSTOM CARVED WOOD PROGRAM BUY DIRECT & SAVE

Custom Designs available in Solid North American Hardwood Hard Maple, Red Oak, Cherry and Alder Send us a sample or a drawing Tooling charges will range - please inquire

How Does The Custom Carved Wood Program Work? Part 1

Part 2

Option A Customer must submit a true to size and detailed 1:1 scale drawing with front & side elevations. (All dimensions needed Length x Width x Depth).

Part 3

A quote will be provided within approximately 48 hours once all necessary information has been submitted to our Artisans.

Once the quote has been approved by the customer, production of the prototype will begin. Additional shipping options and charges Option B may apply. Please inquire. An actual sample is submitted and used as a reference. *Note: There will be a slight variation from the original sample sent to the carver due to the pieces being individually hand carved and the Part 4 artisan’s interpretation. Once the prototype has been approved by the customer, final production will begin. Once again, lead times will vary according to Also include species of wood (Hard Maple, Red Oak, Cherry or Alder) quantity, size and detail. and approximate quantity needed.

Please contact our sales department with any questions concerning information needed for quotation purposes.

J-528


DECORATIVE WHITE HARDWOOD

APPLIQUES WHC60 8” H x 5-1/2” W 1” Depth

These ornaments are made of Medium Density Light Grain White Wood. (Similar to Basswood)

WHC66 4-1/2” H x 12” W 1-1/4” Depth

WHC65 6” H x 16” W 1-3/8” Depth WHC62 6-5/16” H x 14-3/8” W 1-3/16” Depth WHC85 10-1/2” H x 8” W 3/4” Depth WHC85-XS 8-1/4”H x 4-1/4”W 1/2” Depth WHC85-S 8-3/8”H x 5-1/4”W 5/8” Depth

WHC58 10” H x 9-3/8” W 1” Depth

WHC85-L 15”H x 9-1/2”W 3/4” Depth

WHC59 14-1/4” H x 6-5/8” W 1” Depth

WHC67 5-3/4” H x 11” W 1” Depth WHC83-M 4-1/2” H x 12” W 1” Depth

WHC83-L 6” H x 16” W 1” Depth

WHC63 5” H x 12” W 3/4” Depth

WHC72 6-1/2” H x 3-3/8” W 3/4” Depth

(Measurements are approximate)

J-529


DECORATIVE WHITE HARDWOOD

APPLIQUES

These ornaments are made of Medium Density Light Grain White Wood. (Similar to Basswood)

WHC80 9-7/8” H x 8” W 4” Depth WHC64 7-3/4” H x 7-1/2” W 3/4” Depth

WHC61 8” H x 7-3/8” W 1” Depth

WHC80-S 6-1/4” H x 5” W 3-1/2” Depth

WHC80-L 12” H x 10” W 6” Depth

CORBELS WHC79

WHC87-M

(White Hardwood)

(White Hardwood)

8-1/2” H x 5-1/8” W 3-5/8” Depth

WHC77

(White Hardwood)

9” H x 6” W 4” Depth

9” H x 6-1/2” W 5” Depth

WHC71

WHC71-M

(White Hardwood)

(White Hardwood)

WHC71-S

WHC71-L

6-1/8” H x 5-5/8” W 3-3/4” Depth

14” H x 11-3/4” W 8-1/2” Depth

12” H x 10-1/8” W 7-3/4” Depth

(White Hardwood)

J-530

9” H x 8-1/4” W 5-3/4” Depth

(White Hardwood)

WHC73

(White Hardwood)

12-1/2” H x 6-1/2” W 6-1/4” Depth WHC73-S

(White Hardwood)

7” H x 4-1/8” W 3-3/4” Depth

WHC73-L

(White Hardwood)

17-1/2” H x 10” W 8” Depth

(Measurements are approximate)

WHC87-XL

(White Hardwood)

13” H x 3-1/2” W 3-1/2” Depth


C

OL

N

 T HE

N  SA

N ART I S I RE

LECTIO

The Resin Artisan Collection is an exquisite line of ornamentation products born of a hybrid technology. Hardwood Maples & Resins are combined to achieve the most intricate & crisp detailing available. These products are as easy to work with as wood while having several advantages over wood alone. The hybrid technology allows for consistent density without knots, warping or cupping. All standard woodworking tools & glues can be used just as with wood. The non porous resin absorbs stains evenly, resulting in a beautifully uniform finish & color. Experience the exquisite detailing & easy to work with material of The Resin Artisan Collection. • Hybrid Technology • Unparalleled Detailing

• Consistency of Material & Finish • Over 1300 Castings/Designs

• Ease of Use • Endless Applications

J-531


THE RESIN ARTISAN COLLECTION S IN ART I

C

OL

N

Capitals

RE

 T HE

!

49 more styles available. Please Inquire

N  SA

N EW

LECTIO

A B

C

D

6-141A-CAP 4-1/4” W x 7-3/4” H x 2-3/4” D Collar: 3-1/2” W x 1-1/4” D

6-146A-CAP 5-3/4” W x 7” H x 2-1/2” D Collar: 3-1/2” W x 1-1/4” D

F

G

RE

S IN ART I

 T HE

Columns

89 more styles available. Please Inquire

N  SA

E

C

OL

N

6-130AA-CAP Height: 4-3/4” Top: 3-3/4” W x 1-1/4” D Bottom: 2-1/2” W x 1” D

LECTIO

H I

J

BASES

A. 51-156C-MLD B. 51-213D-MLD C. 6-144A-CAP D. 6-134A-CAP E. 18-106A-70-COLM F. 54-421BL-5-OL G. 18-130B-5-COLM H. 3-106A-BASE I. 3-116A-BASE J. 3-117A-BASE K. 3-200B-BASE L. 21-311C-CB

175 more styles available. Please Inquire

RE

S IN ART I

C

OL

3-116A-BASE Height: 15-1/4” Top: 3-1/4” dia. Bottom: 4-1/4” dia.

J-532

18-115B-8-COLM 4-1/2” W x 8’ H x 1” D 18-115C-5-COLM 5-1/2” W x 5’ H x 1-1/2” D

3-119B-BASE Width: 4-1/2” Height: 16” Thickness: 2”

N  SA

K

18-112A-7-COLM 3-1/4” W x 7’ H x 1” D

N

18-111A-7-COLM 3-1/4” W x 7’ H x 1” D

 T HE

L

LECTIO

3-123B-BASE Top collar: 4-3/4” W x 1-1/4” D Bottom: 7-1/2” W x 2-1/2” D Height: 13-1/4”


THE RESIN ARTISAN COLLECTION S IN ART I

C

OL

9-185B-CT 28-3/4” W x 6-3/4” H x 1-1/4” D

LECTIO

9-196B-CT 6-1/2” W x 3” H x 1/2” D

S IN ART I N  SA

C

OL

C

N

71 more styles available. Please Inquire

Centers

RE

 T HE

9-185A-CT 24” W x 5-1/4” H x 1” D

N

Cartouches

RE

 T HE

!

88 more styles available. Please Inquire

N  SA

N EW

LECTIO

B D

E A

G

CORNER ELEMENTS

56 more styles available. Please Inquire

RE

S IN ART I

OL

N  SA

D. 24-135-CE E. 3-106AT-BASE

15-130A-CP 6-1/2” W x 8” H x 1” D

C

A. 54-165A-OL B. 18-112B-5-COLM C. 51-250F-MLD

E. 51-250F-MLD F. 51-320-MLD G. 51-125B-MLD

N

A. 3-112A-BASE B. 15-160-CP C. 6-145A-CAP D. 18-108A-4-COLM

15-141-CP 3-1/4” W x 3-1/2” H x 1/2” D

 T HE

F

LECTIO

A C B D

24-131E-CE 22” W x 22” H x 1-1/4” D E

24-136-CE 3-3/4” W x 3-3/4” H x 1/2” D

J-533


THE RESIN ARTISAN COLLECTION S IN ART I

C

OL

A B

N

CORBELS

RE

 T HE

!

118 more styles available. Please Inquire

N  SA

N EW

LECTIO

C

D E F

21-103A-CB 2-1/4” W x 3-1/2” H x 1-1/2” D

H J

K

21-312-CB 5-1/2” W x 14-1/2” H x 2” D

I

21-218A-CB 3” W x 6” H x 1-1/2” D 21-218B-CB 4” W x 7-1/4” H x 2-1/4” D

G. 54-330B-OL H. 15-147A-CP I. 21-305B-BASE J. 45-5-3-KS K. 51-185F-MLD L. 54-153-OL

RE

S IN ART I

OL

C

ONLAYS

225 more styles available. Please Inquire

N  SA

A. 51-156C-MLD B. 42-120B-FRZ C. 6-130C-CAP D. 51-110-MLD E. 18-117C-5-COLM F. 15-106B-CP

N

L

 T HE

G

LECTIO

B

A

54-110-OL 7-3/4” W x 11-1/2” H x 1/2” D A. 51-101-OL

54-138A-OL 2-3/4” W x 8-1/4” H x 3/4” D

B. 554-140D-OL

54-403-OL 4-1/2” W X 2-1/4” H X 3/4” D

J-534

54-169A-OL 3/4” W x 14-3/4” H x 3/8” D 54-169B-OL 1” W x 15-1/4” H x 3/8” D


THE RESIN ARTISAN COLLECTION 15 more styles available. Please Inquire

C

OL

S IN ART I

C

OL

C. 21-331AT-CB D. 18-115B-8-COLM E. 9-105AD-CT

A. 51-156TDA-MLD with 51-103A-MLD Insert B. 84-4-AT-PB

N

RE

N  SA

FESTOONS

8 more styles available. Please Inquire

LECTIO

39-110-FIN 2-1/4” dia. x 3-3/4” H

39-102-FIN 4-3/4” W x 6” H x 4-3/4” D

33-120D-FACE 4-1/2” W x 5-3/4” H x 1-3/4” D

S IN ART I

OL

LECTIO

 T HE

33-113-FACE 3-1/2” W x 4” H x 1-1/4” D

FINIALS

RE

N

 T HE C

OL

8 more styles available. Please Inquire

N  SA

S IN ART I

30-200AA-DP 1-1/4” W x 10-1/2” H x 1/2” D

C

18 more styles available. Please Inquire

RE

30-104-DP 1” W x 7-1/2” H x 1/2” D

N

27-160-DC 1-1/2” W x 1-1/2” H x 1/2” D

N  SA

FACES

LECTIO

 T HE

C

OL

27-100-DC 2-1/4” W x 4-1/2” H x 1/2” D

LECTIO

N

 T HE

15 more styles available. Please Inquire

S IN ART I N  SA

DECOS

RE

N

DROPS

 T HE

!

S IN ART I N  SA

N EW

RE

LECTIO

A

E

B

36-101A-FEST 5-1/4” W x 2-1/2” H x 1/2” D 36-101B-FEST 8-1/4” W x 1-1/2” H x 1/2” D

C

D

36-103-FEST 15-1/2” W x 3-1/4” H x 1/2” D

J-535


THE RESIN ARTISAN COLLECTION S IN ART I

OL

N

FRIEZES

RE

 T HE

215 more styles available. Please Inquire

C

!

All Mouldings Are Flexible Resin

N  SA

N EW

LECTIO

A

F

B C

42-103-FRZ 2-1/2” W x 1/2” D x 8’ L x 3” repeat

E

G D E. 42-200B-FRZ F. 6-134C-CAP G. 18-106C-67-COLM

A

N

 T HE OL

LECTIO

51-108-MLD 1-3/4” W x 1/2” D x 10’ L x 2-7/8” repeat

51-174-MLD 1-3/4” W x 1” D x 10’ L RE

C

OL

A. 48-106CTR-A-MD with 48-106CTR-B-MD

A

48-100-MD 12-1/2” dia x 5” D

S IN ART I

48-105-MD 15-1/4” dia x 2-1/2” D

N  SA

MEdallions

6 more styles available. Please Inquire

N

A. 51-151FF-MLD

J-536

S IN ART I N  SA

363 more styles available. Please Inquire

MOULDINGS

RE

C

All Mouldings Are Flexible Resin

42-186-FRZ 5-1/2” W x 1/2” D x 8’ L x 9-1/2” repeat

 T HE

A. 6-144A-CAP B. 54-421BL-S-OL C. 18-130B-5-COLM D. 3-106B-BASE

LECTIO


THE RESIN ARTISAN COLLECTION S IN ART I

C

OL

N

SWAGS

RE

 T HE

LECTIO

78-125A-SW 2” W x 5” H x 3/4” D each side 78-125B-SW 3” W x 10” H x 3/4” D each side 78-125C-SW 5” W x 18” H x 1-1/4” D each side S IN ART I N  SA

RE

OL

C

SCROLLS

3 more styles available. Please Inquire

 T HE

78-106-SW 5-1/2” W x 10-3/4” H x 3/4” D each side

N

!

36 more styles available. Please Inquire

N  SA

N EW

LECTIO

A B

C

RE

S IN ART I

C

OL

N

SPECIALTIES

69 more styles available. Please Inquire

N  SA

D

99-200L-SCR 11-1/2” W x 17” H x 1” D 99-200R-SCR 11-1/2” W x 17” H x 1” D

 T HE

99-110-SCR 5” W x 11-1/2” H x 1/2” D each side

LECTIO

E

A. 45-102A-XT-KS B. 51-182F-MLD C. 18-107B-4-COLM

75-101AA-SPC 2-1/2” W x 1-1/4” H x 5/8” D works with 2-1/4” columns

D. 3-120A-BASE E. 42-200A-FRZ

75-100A-SPC 3” W x 4-1/2” H x 1-3/4” D

J-537


THE RESIN ARTISAN COLLECTION S IN ART I

C

OL

N

Plinth BlOCKS

RE

 T HE

!

24 more styles available. Please Inquire

N  SA

N EW

LECTIO

B A

C E D

31 more styles available. Please Inquire

RE

S IN ART I N  SA

PULLS

60-293-PB 5” W x 5” H x 1-1/4” D

C

OL

N

D. 18-115B-8-COLM E. 54-210-OL

 T HE

A. 42-155C-8-FRZ B. 42-153C-8-FRZ C. 60-293-PB

60-3-2-PB 3-1/4” W x 3-1/4” H x 1-3/4” D

LECTIO

A

63-109-PULL 4” W x 2-3/4” H x 1-5/8” D

63-111B-PULL 6-1/2” W x 3” H x 1-1/4” D

A. 63-109-PULL

J-538

66-123B-RING 8-7/8” O.D. 5” I.D. 1” thick

N

 T HE OL

A

66-100-RING 5-1/2” O.D. 3-1/4” I.D. 3/4” thick

S IN ART I N  SA

6 more styles available. Please Inquire

C

A. 66-123B-RING

RINGS

RE

LECTIO


THE RESIN ARTISAN COLLECTION C

OL

N

136 more styles available. Please Inquire

PANELS

S IN ART I

 T HE

!

RE

N  SA

N EW

LECTIO

B

A

57-103A-PANEL 8” W x 17-1/4” H x 1” D 57-103B-PANEL 12-3/4” W x 22-3/4” H x 1-1/4” D

57-116B-PANEL 11-3/4” W x 11-3/4” H x 1” D

C

57-129-PANEL 29-1/4” L x 2-3/4” H x 1-3/4” D S IN ART I N  SA

OL

N

KEYSTONES

D. 51-204B-MLD E. 3-118C-BASE

RE

C

A. 51-185F-MLD (Flex) B. 45-107C-KS C. 51-185-MLD (Wood)

47 more styles available. Please Inquire

 T HE

A. 57-103B-PANEL B. 21-221F-CB C. 18-115D-5-COLM

LECTIO

B

A

45-102A-XT-KS 12” W x 6-3/4” H x 2-1/2” D

C

45-104A-KS 9-1/4” W x 7-1/4” H x 3-1/4” D

D

E

45-107A-KS 21-3/4” x 6-3/4” x 2-3/4”

J-539


THE RESIN ARTISAN COLLECTION S IN ART I

C

OL

N

ROSETTES

RE

 T HE

!

127 more styles available. Please Inquire

N  SA

N EW

LECTIO

A

B

69-123-ROST 1-1/2” dia. x 1/2” D

69-166-ROST 2-1/2” dia. x 1-1/4” D

A. 69-357C-ROST B. 6-130B-CAP

69-351A-ROST 4” dia. x 3/4”

SCONCES

A

6 more styles available. Please Inquire

RE

S IN ART I

C

OL

A. 12-122-CEIL

A

12-120-CEIL 16-1/2” W x 16-1/2” H x 6-1/2” D

J-540

12-130-CEIL 27” W x 27” H x 6” D

N

CEILING ELEMENTS

72-102-SCON 8” W x 10” H x 4” D

N  SA

A. 72-102-SCON

72-101-SCON 10-1/4” W x 14-1/2” H x 7” D

 T HE

72-100-SCON 12” W x 9” H x 7” D

LECTIO


DECORATIVE RESIN

CAPITALS

These ornaments are made of a Polymer Resin material. This is the true base finish shown “swatch”. Due to photographic imaging, products can vary in color.

2-3/4”

Shown : C3505-A

C3614 5” H x 4-1/4” W 1-1/4” Depth

3-3/4”

C3505-A 5-7/8” H x 4-1/8” W 1-3/4” Depth

* C1001 5-3/4” H x 3-1/4” W 7/8” Depth

C1044 3” H x 3-1/8” W 1-1/4” Depth

3-5/8”

C3615 6-3/4” H x 4” W 1” Depth

* Supplied with pre-attached keyhole hangers *C1561 4-1/2” H x 10-1/2” W 2-3/4” Depth

*C1122 6” H x 7-1/8” W 3-5/8” Depth 3-1/2”

3-3/4” 7-7/8”

C1147 3” H x 4-1/8” W 1” Depth

Shown : A3501

BASES

4”

A4201 29”H x 3-3/8”W 4-1/2” Depth

A3501 32-1/2”H x 4-1/8”W 1-3/4” Depth A1121 19” H x 4” W 7-7/8” Depth (Measurements are approximate)

J-541


DECORATIVE RESIN

CORBELS

These ornaments are made of a Polymer Resin material. This is the true base finish shown “swatch”. Due to photographic imaging, products can vary in color.

*C1029 5” H x 2-5/8” W 1-3/8” Depth

*C1516 9” H x 5-1/4” W 4-3/4” Depth

*C1014 8-3/4” H x 3-3/4” W 3-3/4” Depth

*C1002 4-3/8” H x 3” W 1-1/4” Depth

*C4044 14-3/4” H x 5” W 5” Depth *C1539 23” H x 7-3/4” W 7-1/4” Depth

*C1573 11-3/4”H x 4-3/4”W 5-1/2” Depth

*C1540 11-7/8” H x 6-7/8” W 6-1/8” Depth

FOR THIS DESIGN IN MORE SIZES, SEE PAGE 526.

* Supplied with pre-attached keyhole hangers

CENTERS

CARTOUCHES

A1217 12-3/4” H x 8-1/8” W 3/4” Depth

*D1387 14-3/4” H x 44” W 1-1/4” Depth

*A1218 11” H x 14-7/8” W 1-3/8” Depth

J-542

(Measurements are approximate)


DECORATIVE RESIN These ornaments are made of a Polymer Resin material. This is the true base finish shown “swatch”.

DECOS

Due to photographic imaging, products can vary in color. A1008 7-1/2” H x 4-1/4” W 1” Depth

A1006 5-3/8” H x 9-1/2” W 1” Depth

D9006 17” Dia. 3/4” Depth

A2355 22-1/2” H x 6” W 1-1/2” Depth

FESTOONS

A1564 (3 Piece Set) 6-1/2” H x 18-3/8” W 1/2” Depth

1

3

2

A1567

(Bow)

8-1/2” H x 5” W 3/4” Depth

SCROLLS

1

A1565 (Swag) 17-1/2” Long 3/4” Depth

ROSETTES A3412 5” H x 5” W 1-1/4” Depth

A1566 (2 Piece Set) 17-1/2” Long x 23” Wide x 3/4” Depth

2

*A3203 6-1/4” H x 6-1/4” W 1-1/2” Depth

*A3202 6-1/4” H x 6-1/4” W 1-1/2” Depth

SOLD AS A LEFT & RIGHT PAIR (dimensions are for one side only)

A1315 Pair of Leaf Overlays 10-1/2” H x 24-3/4” W x 1-1/2” Depth (Measurements are approximate)

J-543


EMBOSSED WOOD ORNAMENTS

APPLIQUES RWA20-M 1-3/16” Dia. 3/16” Depth

RWA21-M 1-9/16” Dia. 3/16” Depth

RWA27-M 2-3/8” Dia. 3/16” Depth

CC601 3-3/4” Dia. 1/4” Depth

RWA26-M 2-3/4” H x 1-3/8” W 3/16” Depth

J-544

RWA24-M 3-1/2” Dia. 3/16” Depth

RWA22-M 2-1/2” Dia. 3/16” Depth

CC634 1-1/2” Dia. 1/4” Depth

CC632 1-3/8” Dia. 1/4” Depth

CC635 1-3/4” Dia. 1/4” Depth

These ornaments are made of a Laminated Wood with a Maple Veneered Surface. Detail is pressed in.

RWA25-M 2” Dia. 3/16” Depth

RWA28-M 2-9/16” Dia. 1/4” Depth

CC677 3” Dia. 1/4” Depth

RWA57-M 4-3/8” H x 5” W 3/16” Depth

CC609 5-1/8” Dia. 1/4” Depth

RWA29-M 3-11/16” H x 1-7/8” W 3/16” Depth

RWA51-M 3” H x 5-3/4” W 1/4” Depth

RWA47-M 2-3/16” H x 3” W 3/16” Depth

(Measurements are approximate)

RWA46-M 2-13/16” H x 1-1/2” W 1/4” Depth


EMBOSSED WOOD ORNAMENTS

APPLIQUES RWA48-M 3-5/16” H x 3-5/16” W 1/4” Depth

CC687 5-3/4” H x 4” W 1/4” Depth

These ornaments are made of a Laminated Wood with a Maple Veneered Surface. Detail is pressed in.

RWA50-M 5” H x 5” W 3/16” Depth CC607 4” H x 3-3/4” W 1/4” Depth

RWA52-M 3-11/16” H x 2-11/16” W 3/16” Depth

CC693 4-1/2” H x 4-1/2” W 1/4” Depth

CC604 4” H x 3-3/8” W 1/4” Depth CC606 2-1/2” H x 3-3/8” W 1/4” Depth

CC640 2-3/4” H x 1” W 1/4” Depth

RWA45-M 4-3/8” H x 6” W 3/16” Depth RWA42-M 2-1/2” H x 5-3/4” W 3/16” Depth

CC676 2-1/4”H x 1-7/8”W 1/4” Depth RWA41-M 2-1/2” H x 3” W 3/16” Depth

RWA34-M 4-1/2” H x 9” W x 1/4” Depth

RWS36-M 1-5/8” H x 8-3/8” W x 3/16” Depth

RWS38-M 2-5/8” H x 9-1/4” W x 1/4” Depth

(Measurements are approximate)

J-545


EMBOSSED WOOD ORNAMENTS

APPLIQUES

These ornaments are made of a Laminated Wood with a Maple Veneered Surface. Detail is pressed in. RWS50-M 4-3/8” H x 19-3/16” W x 1/4” Depth

RWS47-M 3-1/2” H x 17-3/16” W x 1/4” Depth

RWS45-M 3-5/8” H x 10-13/16” W x 3/16” Depth RWS37-M 4-1/4” H x 10-1/8” W x 3/16” Depth CC789 3-3/4” H x 16-1/4” W x 1/4” Depth

CC727 5-5/8” H x 36-7/8” W x 1/4” Depth

CC729 7” H x 41” W x 1/4” Depth

SCROLLS

SOLD AS A LEFT & RIGHT PAIR (dimensions are for one side only)

These ornaments are made of a Laminated Wood with a Maple Veneered Surface. Detail is pressed in. RWS28-M 9-11/16” H x 3-3/8” W 1/4” Depth

RWS29-M 10-5/8” H x 2-3/4” W 1/4” Depth

RWS26-M 6” H x 3-3/8” W 3/16” Depth

RWS22-M 5-3/8” H x 2-3/8” W 3/16” Depth

CC605 1-3/8” H x 3-1/8” W x 1/4” Depth

J-546

CC665 5-3/4” H x 11-1/4” W x 1/4” Depth

(Measurements are approximate)

CC776 2-3/8” H x 14-1/2” W x 1/4” Depth


POLYURETHANE TEXTURED ORNAMENTS

CARTOUCHES

These DECORATIVE Textured Woodgrain ornaments are made of a Lightweight Polymer.

Some ornaments have been finished for photographic purposes-ornaments come unfinished only.

APP-59 3-5/16” H x 7-1/2” W 9/16” Depth

APP-50 4-3/4” H x 14-13/16” W 3/8” Depth

APP-55 4-1/16” H x 14-5/16” W 1/2” Depth

APP-85 5-13/16” H x 15-1/2” W 9/16” Depth

APP-70 9-1/16” H x 17-1/8” W 1-3/16” Depth

APP-73 7-1/4” H x 15-3/4” W 1-1/16” Depth

APP-74 4-1/2” H x 19-11/16” W 9/16” Depth

APP-72 6-7/8” H x 15-3/4” W 5/8” Depth

APP-80 3” H x 20-1/4” W 9/16” Depth

APP-69 8-13/16” H x 22-7/16” W 1-3/16” Depth

APP-78 4-3/4” H x 24-3/16” W 9/16” Depth (Measurements are approximate) USE GEL STAIN OR PAINT TO FINISH PRODUCT

J-547


POLYURETHANE TEXTURED ORNAMENTS

SCROLLS

These DECORATIVE Textured Woodgrain ornaments are made of a Lightweight Polymer.

Some ornaments have been finished for photographic purposes-ornaments come unfinished only.

APP-18 6-11/16” H x 2” W 9/16” Depth each side

APP-10 3-3/8” H x 7-3/4” W 9/16” Depth each side

APP-12 4-7/16” H x 4-13/16” W 1/2” Depth each side

APP-11 3-5/16” H x 7-13/16” W 9/16” Depth each side

CORBELS

APP-33 3-1/2” H x 2-3/8” W 1-9/16” Depth

J-548

APP-19 11-5/8” H x 5-5/16” W 5/8” Depth each side

APP-15 4-7/8” H x 3-3/4” W 1/2” Depth each side

APP-14 4-15/16” H x 3-1/8” W 1/2” Depth each side

CAPITALS

BKT4X8S Woodgrain/Stainable Oak Texture 7-5/8” H x 3-1/4” W 3-7/8” Depth

APP-32 9-1/16” H x 4-3/4” W 2-3/4” Depth

(Measurements are approximate) USE GEL STAIN OR PAINT TO FINISH PRODUCT

6-1/2”

APP-131 5-5/16” H x 8-7/8” W 2-3/16” Depth


POLYURETHANE TEXTURED ORNAMENTS

ONLAYS

These DECORATIVE Textured Woodgrain ornaments are made of a Lightweight Polymer.

Some ornaments have been finished for photographic purposes-ornaments come unfinished only.

APP-112 2-3/4” H x 13/16” W 3/8” Depth

APP-111 3-1/4” H x 1-1/16” W 3/8” Depth

APP-63 3-1/4” H x 6-1/2” W 9/16” Depth

APP-52 6-5/16” H x 9-3/4” W 1/2” Depth

APP-98 3-1/8” H x 2” W 9/16” Depth

APP-66 2” H x 3-1/2” W 3/8” Depth

APP-67 2-1/4” H x 4-5/16” W 1/2” Depth

APP-110 4-1/8” H x 1-5/8” W 1/2” Depth APP-68 3-15/16” H x 9-7/16” W 1/2” Depth

APP-64 2” H x 8” W 1/2” Depth

APP-61 3-9/16” H x 7-5/8” W 9/16” Depth

APP-89 2-1/2” H x 12” W 1/2” Depth

APP-86 4-5/16” H x 11-13/16” W 9/16” Depth

APP-114 14-3/8” H x 14-3/16” W 9/16” Depth

APP-71 7-1/16” H x 15-9/16” W 9/16” Depth APP-81 3-5/8” H x 15-7/16” W 9/16” Depth

APP-113 10-5/16” OD x 6-7/16” ID 9/16” Depth APP-76 7-11/16” H x 17-15/16” W 9/16” Depth

(Measurements are approximate) USE GEL STAIN OR PAINT TO FINISH PRODUCT

J-549


POLYURETHANE TEXTURED ORNAMENTS

ONLAYS

These DECORATIVE Textured Woodgrain ornaments are made of a Lightweight Polymer.

Some ornaments have been finished for photographic purposes-ornaments come unfinished only.

APP-84 1-3/8” H x 9-5/16” W 3/4” Depth

APP-62 1-3/4” H x 10-5/16” W 1/2” Depth

APP-88 1-3/4” H x 14” W 3/4” Depth

APP-79 2” H x 19-11/16” W 3/4” Depth

APP-118 1-9/16” H x 19-11/16” W 3/4” Depth

APP-77 4-5/16” H x 24” W 9/16” Depth

PANELS

APP-40 7-1/2” H x 22-1/16” W 3/4” Depth

J-550

APP-41 10” H x 19-1/4” W 3/4” Depth

(Measurements are approximate) USE GEL STAIN OR PAINT TO FINISH PRODUCT


POLYURETHANE TEXTURED ORNAMENTS

ROSETTES

These DECORATIVE Textured Woodgrain ornaments are made of a Lightweight Polymer.

Some ornaments have been finished for photographic purposes-ornaments come unfinished only.

APP-92 3-3/8” H x 3-3/8” W 9/16” Depth

APP-91 3-15/16” Dia. 1/2” Depth

APP-95 2-7/16” H x 4-3/8” W 5/8” Depth

CENTERS APP-120 6-5/16” H x 4-1/4” W 3/4” Depth

APP-90 3-1/8” H x 5-1/16” W 1/2” Depth

APP-116 9-5/8” H x 5-1/8” W 11/16” Depth

APP-53 4-15/16” H x 12-3/16” W 9/16” Depth

APP-93 3-15/16” H x 3-15/16” W 1/2” Depth

APP-96 4-1/8” H x 4-1/8” W 5/8” Depth

APP-99 2-9/16” H x 5-1/8” W 5/8” Depth

APP-100 4-1/8” H x 6-5/8” W 3/4” Depth APP-119 11-3/4” H x 5-7/8” W 11/16” Depth

APP-117 9-7/16” H x 7-7/8” W 9/16” Depth

APP-56 3-1/4” H x 9-9/16” W 9/16” Depth

APP-94 4-11/16” H x 4-11/16” W 5/8” Depth

APP-115 19-7/8” H x 9-7/16” W 1-1/16” Depth

(Measurements are approximate) USE GEL STAIN OR PAINT TO FINISH PRODUCT

J-551


POLYURETHANE NON-TEXTURED ORNAMENTS CEILING & WALL SMOOTH APPLIQUES

N EW

Manufactured of high density polyurethane, these plaster-like decorative ornaments are lightweight, primed and ready to paint. DSA-103

3-3/8” Dia. 3/4” Depth

DSA-109

5” Dia. 3/4” Depth

DSA-105

3-1/2” Dia. 1/2” Depth

DSA-107

4” Dia. 3/4” Depth

DSA-123

4-3/4” H x 3-1/4” W 1/2” Depth

DSA-125

3-1/2” H x 5” W 3/4” Depth

DSA-132

6-1/2” H x 6-1/2” W 7/8” Depth

DSA-152

6” H x 12-1/4” W 3/4” Depth

DSA-130

6-1/2” H x 5” W 1-1/4” Depth

DSA-134

6-3/4” H x 5-1/2” W 5/8” Depth

DSA-143

9-1/8” H x 6-1/2” W 1” Depth

DSA-425

DSA-150

10-3/4” H x 12” W 1-1/4” Depth

DSA-154

6-1/2” H x 19” W 1-1/4” Depth

12-1/4” H x 9” W 1-1/4” Depth

DSA-157

13” H x 5-1/4” W 1” Depth

DSA-159

13” H x 8-1/2” W 1-1/4” Depth

J-552

!


POLYURETHANE NON-TEXTURED ORNAMENTS CEILING & WALL SMOOTH APPLIQUES & SCROLLS Manufactured of high density polyurethane, these plaster-like decorative ornaments are lightweight, primed and ready to paint.

N EW

!

Appliques

DSA-140

3-1/8” H x 8-5/8” W 1” Depth

DSA-146

5-1/4” H x 10-1/2” W 1-1/2” Depth

DSA-410

6-1/4” H x 11-3/4” W 1-1/2” Depth

DSA-420

8-3/4” H x 16-1/2” W 1-3/4” Depth

DSA-433

15-1/8” H x 28-3/4” W 2-7/8” Depth

DSA-167

6-5/8” H x 16-3/4” W 7/8” Depth

Scrolls DSA-210-L/R

5-1/4” H x 2-1/2” W 1” Depth

DSA-230-L/R

11-1/4” H x 5-1/2” W 1-1/8” Depth

DSA-225-L/R

7-1/4” H x 5” W 1” Depth

DSA-220-L/R

8-1/2” H x 4” W 1” Depth

DSA-240-L/R

12-1/2” H x 7” W 1-7/8” Depth

DSA-235-L/R

18” H x 7-1/4” W 1-1/2” Depth

J-553


POLYURETHANE NON-TEXTURED ORNAMENTS

CEILING & WALL SMOOTH MASSIVE APPLIQUES - Wallscape Series

N EW

Manufactured of high density polyurethane, these plaster-like decorative ornaments are lightweight, primed and ready to paint.

!

DSA-435

12-1/4” H x 32” W 2” Depth

DSA-430

9-3/4” H x 28-1/2” W 2-3/4” Depth

DSA-437

14” H x 32” W 2-1/2” Depth

DSA-428

28” H x 25” W 2-1/2” Depth

DSA-161

13” H x 10-1/4” W 2-1/4” Depth

DSA-439

5-3/4” H x 34-3/4” W 1-1/2” Depth

DSA-445

DSA-448

9-1/2” H x 46-1/2” W 1-1/4” Depth

7-1/4” H x 43-1/2” W 1-1/2” Depth

DSA-450

6-1/2” H x 48” W 2-1/4” Depth

J-554


POLYURETHANE NON-TEXTURED ORNAMENTS SMOOTH CEILING ORNAMENTS

Manufactured of high density polyurethane, these plaster-like decorative ornaments are lightweight, primed and ready to paint. DSA-109

N EW

!

SHOWN: DSA-165, DSA-167

5” Dia. 3/4” Depth

DSA-167

6-5/8” H x 16-3/4” W 7/8” Depth

DSA-154

12-1/4” H x 9” W 1-1/4” Depth

DSA-165

10” H x 16” W 5/8” Depth

DSA-159

13” H x 8-1/2” W 1-1/4” Depth SHOWN: DSA-154, DSA-159, DSA-109

Ceiling Corner DSA-170

18-1/4” H x 18-1/4” W 2-1/4” Depth

J-555


POLYURETHANE NON-TEXTURED CORBELS

CORBELS A

N EW

These DECORATIVE high density smooth corbels are lightweight, primed and ready to paint.

N EW

B

!

E

D

C

!

N EW

N EW

!

!

G

F

I H

A B C D E F G H I J

J-556

PART # DCOR-05-XS DCOR-07-XS DCOR-12-XS DCOR-15-XS DCOR-20-XS DCOR-23-XS DCOR-25-XS DCOR-30-XS DCOR-35-S DCOR-38-S

HEIGHT 3-13/16” 4-1/2” 5-1/2” 5-3/4” 5-3/4” 6-1/2” 6-3/8” 7-7/8” 7-3/4” 8-1/4”

WIDTH 2-9/16” 3” 4” 4-1/8” 3-7/16” 4-5/16” 4-3/8” 3-1/4” 4-7/8” 5-3/16

DEPTH KEYHOLE 1-1/2” No 1-3/4” No 2” No 2-1/4” No 2-3/4” No 2-1/4” No 2-11/16” Yes 2-1/2” No 2-3/8” Yes 3-1/4 Yes

D

W

N EW

!

H

J


POLYURETHANE NON-TEXTURED CORBELS

CORBELS

These DECORATIVE high density smooth corbels are lightweight, primed and ready to paint.

L

N EW

M

!

N

O

N EW

N EW

!

!

K

N EW

D

!

S

W

P

H

Q R

K L M N O P Q R S

PART # DCOR-40-S DCOR-45-S DCOR-55-S DCOR-61-M DCOR-65-M DCOR-80-L DCOR-86-L DCOR-91-XL DCOR-95-XL

HEIGHT WIDTH 8-1/8” 4-7/8” 9-3/8” 6-3/16” 9-1/2” 4-13/16” 11” 7-13/16” 12-1/8” 5-1/8” 14-5/8” 8-1/4” 17-3/8” 5-13/16” 26-7/8” 5” 41-1/2” 8-1/8”

DEPTH 3-7/16” 4-5/8” 2-1/2” 3-3/4” 5-5/16” 4-11/16” 4-1/8” 5” 7-1/4”

KEYHOLE Yes Yes Yes Yes Yes Yes No No No

DCOR-95-XL

J-557


KITCHEN ISLAND LEGS

3-3/4”

SOLID NORTH AMERICAN HARDWOOD

6-1/8” 6-3/8”

23”

• North American Hard Maple, Red Oak, Cherry or Hardwood (Paint Grade). • No Sanding - Ready To Finish. • Stain or Paint.

35-1/4” 10-1/2”

3-3/4”

35-1/4”

6” 22-7/8”

9-5/8”

23-1/4” 20” 6-1/8”

9-5/8”

13”

35-1/4”

17-5/8” 35-1/4”

6”

35-1/4”

3-1/2”

35-1/4”

35-1/4”

3-3/4”

17-5/8”

Rope

(right twist only)

Grape

ISL-35-M

ISL-65-M

ISL-35-OAK ISL-35-CH

22-1/4”

4-3/4”

8” 3-3/4”

Fluted ISL-40-M ISL-40-OAK ISL-40-CH ISL-40-HW

8”

ISL-65-CH 3-3/4”

3-3/4” 2”

French ISL-45-M ISL-45-OAK ISL-45-CH

J-558

ISL-65-OAK

6”

3-3/4”

Full Round ISL-50-M

Half Round

(flush mount) 1-3/4” projection

ISL-H-55-M

ISL-50-OAK

ISL-H-55-OAK

ISL-50-CH

ISL-H-55-CH

ISL-50-HW

ISL-H-55-HW

Acanthus Leaf ISL-60-M ISL-60-OAK ISL-60-CH ISL-60-HW


KITCHEN ISLAND LEGS & CORNER POSTS

SOLID NORTH AMERICAN HARDWOOD North American Hard Maple, Red Oak, Cherry or Hardwood (Paint Grade).

2-3/4” CORNER POSTS

3-3/4” ISLAND LEGS

All corner posts dimensions: 34-1/2” High, 2-3/4” Deep, 2-3/4” Wide.

6”

Column

35-1/4”

HERRINGBONE COLLECTION

10-1/2”

Grape CCP-10-M

ISL-75-M

ISL-70-M

CCP-10-OAK

ISL-75-OAK

ISL-70-OAK

CCP-10-CH

ISL-75-CH ISL-75-HW

ISL-70-CH

35-1/4”

23-1/4” 20” 4-1/4”

6” 4-3/4” 3-3/4”

35-1/4”

3-3/4”

24”

4-1/4”

MISSION WEAVE

10-1/2”

Acanthus Leaf

ISL-80-M ISL-80-OAK ISL-80-CH

35-1/4”

CCP-20-M

35-1/4”

CCP-20-OAK CCP-20-CH

24”

CCP-20-HW

7”

20”

3-3/4”

OPEN WEAVE ISL-90-M ISL-90-OAK

4-3/4”

ISL-90-CH 3-3/4”

Weave

MISSION PLAIN

CCP-30-OAK

ISL-85-M

CCP-30-CH

ISL-85-OAK ISL-85-CH

CCP-30-M

7”

ISL-85-HW 3-3/4”

J-559


KITCHEN ISLAND LEGS

SOLID NORTH AMERICAN HARDWOOD North American Hard Maple, Red Oak, Cherry or Hardwood (Paint Grade).

LARGE 5” DIAMETER

4-1/4”

6-1/8”

23”

35-1/4”

4-1/4”

24”

35-1/4”

10-1/2” 35-1/4”

5”

24”

35-1/4” 9-5/8” 13”

7”

20”

6-1/8”

17-5/8” 5”

35-1/4” 35-1/4”

Rope ISL-35-M-5 ISL-35-OAK-5 ISL-35-CH-5

5”

7”

ISL-85-M-5 4-3/4”

5” 5”

Fluted

MISSION WEAVE

22-1/4” 8”

ISL-80-M-5 ISL-80-OAK-5

ISL-40-M-5 ISL-40-OAK-5 ISL-40-CH-5

2-1/2”

ISL-40-HW-5

French ISL-45-M-5 ISL-45-OAK-5 ISL-45-CH-5

J-560

MISSION PLAIN

5”

Full Round ISL-50-M-5 ISL-50-OAK-5 ISL-50-CH-5 ISL-50-HW-5

ISL-80-CH-5

ISL-85-OAK-5 ISL-85-CH-5 ISL-85-HW-5


KITCHEN ISLAND LEGS

SOLID NORTH AMERICAN HARDWOOD North American Hard Maple, Red Oak, Cherry or Hardwood (Paint Grade).

LARGE 5” DIAMETER 6”

9-5/8”

17-5/8”

6”

23-1/4”

35-1/4”

35-1/4”

10-1/2”

17-5/8” 35-1/4” 35-1/4” 23-1/4”

8”

10-1/2”

6-3/8”

6”

5”

5” 35-1/4”

Half Round

6”

20”

5”

5”

ISL-H-55-M-5

ISL-H-55-CH-5

Acanthus Leaf

ISL-H-55-HW-5

ISL-60-M-5

ISL-H-55-OAK-5

OPEN WEAVE 6”

5”

ISL-60-HW-5

Grape ISL-65-M-5 ISL-65-OAK-5 ISL-65-CH-5

ISL-75-M-5 ISL-75-OAK-5 ISL-75-CH-5 ISL-75-HW-5

ISL-90-M-5

4-3/4”

ISL-60-OAK-5 ISL-60-CH-5

Column

4-3/4”

22-7/8”

(Flush Mount) 2-3/8” projection

35-1/4”

ISL-90-OAK-5 5”

HERRINGBONE COLLECTION ISL-70-M-5 ISL-70-OAK-5

ISL-90-CH-5

For more Legs, see pages 220-227.

ISL-70-CH-5

J-561


DESIGN A COLUMN SYSTEMS

SOLID NORTH AMERICAN HARDWOOD HALF ROUNDS, CAPS & BASES

DESIGN A COLUMN is a cost effective way to create mix and match components to your own designs. Easily pair one of our half rounds with a cap or base of your choice to enhance the perfect look on all your projects. The possibilities are endless!

1½”

Half Round Column Styles REEDED DESIGN

ROPE Half Round Columns PART # JB-150-RM JB-150-RCH JB-250-RM JB-250-RCH

PLAIN DESIGN

FINISH SIZE Maple 3/4” TH x 1-1/2” W x 8’ L Cherry 3/4” TH x 1-1/2” W x 4’ L Maple 1-1/8” TH x 2-1/2” W x 8’ L Cherry 1-1/8” TH x 2-1/2” W x 4’ L

FLUTED Half Round Columns PART # JB-150-FM JB-150-FCH JB-250-FM JB-250-FCH

WEAVE DESIGN

CHERRY - 4 ft. lengths MAPLE - 8 ft. lengths

FINISH SIZE Maple 3/4” TH x 1-1/2” W x 8’ L Cherry 3/4” TH x 1-1/2” W x 4’ L Maple 1-1/8” TH x 2-1/2” W x 8’ L Cherry 1-1/8” TH x 2-1/2” W x 4’ L

PLAIN Half Round Columns

FLUTED DESIGN

PART # JB-150-PM JB-150-PCH JB-250-PM JB-250-PCH

ROPE DESIGN

• Material: North American Hard Maple or Cherry Woods. • No Sanding - Ready To Finish. • Stain or Paint. • Applications: Cabinetry, Islands, Furniture, etc...

FINISH SIZE Maple 3/4” TH x 1-1/2” W x 8’ L Cherry 3/4” TH x 1-1/2” W x 4’ L Maple 1-1/8” TH x 2-1/2” W x 8’ L Cherry 1-1/8” TH x 2-1/2” W x 4’ L

WEAVE Half Round Columns PART # JB-150-WM JB-150-WCH JB-250-WM JB-250-WCH

FINISH SIZE Maple 3/4” TH x 1-1/2” W x 8’ L Cherry 3/4” TH x 1-1/2” W x 4’ L Maple 1-1/8” TH x 2-1/2” W x 8’ L Cherry 1-1/8” TH x 2-1/2” W x 4’ L

REEDED Half Round Columns PART # JB-150-REM JB-150-RECH JB-250-REM JB-250-RECH

2½”

FINISH SIZE Maple 3/4” TH x 1-1/2” W x 8’ L Cherry 3/4” TH x 1-1/2” W x 4’ L Maple 1-1/8” TH x 2-1/2” W x 8’ L Cherry 1-1/8” TH x 2-1/2” W x 4’ L

Half Round Column Styles

REEDED DESIGN WEAVE DESIGN PLAIN DESIGN FLUTED DESIGN ROPE DESIGN

J-562

Photo compliments of Rev-A-Shelf


DESIGN A COLUMN SYSTEMS

CHERRY - 4 ft. lengths MAPLE - 8 ft. lengths

SOLID NORTH AMERICAN HARDWOOD HALF ROUNDS, CAPS & BASES

universal caps or bases

PLAIN ROUND UNIVERSAL CAP OR BASE

UNIVERSAL WEAVED ROUND CAP OR BASE

A

B

For 1-1/2” Half Round 2-7/8” H x 2-1/2” W x 1-1/4” Depth For 2-1/2” Half Round 4-3/8” H x 3-7/8” W x 1-7/8” Depth PART #

JB-WRCB150-M

B

For 1-1/2” Half Round 2-7/8” H x 2-1/2 W x 1-1/4” Depth For 2-1/2” Half Round 4-3/8” H x 3-7/8” W x 1-7/8” Depth PART #

FINISH

Maple

A

JB-WRCB150-CH

Cherry

B

JB-WRCB250-CH

Cherry

JB-WRCB250-M

A

A

Maple

B

JB-PRCB150-M

B

JB-PRCB250-CH

Cherry

A B

B

PART #

FINISH

JB-WCB150-M

JB-WCB150-CH

Cherry

Maple

B

JB-WCB250-CH

Cherry

JB-RECB250-CH

Cherry

FINISH

A

JB-CB150-CH

Cherry

B

JB-CB250-CH

Cherry

JB-WCB250-M

A

B

Maple

A

Cherry

PART #

JB-CB150-M JB-CB250-M

Maple Maple

PLAIN UNIVERSAL CAP OR BASE

For 1-1/2” Half Round 3-1/2” H x 2-5/8” W x 1-1/4” Depth For 2-1/2” Half Round 5-3/8” H x 4” W x 2” Depth

Maple

JB-RECB150-CH JB-RECB250-M

A

FINISH

JB-RECB150-M

Maple

For 1-1/2” Half Round, 1-1/4” H x 2-7/8” W x 1-3/8” Depth For 2-1/2” Half Round, 2-1/8” H x 4-1/8” W x 2” Depth

WEAVED UNIVERSAL CAP OR BASE

For 1-1/2” Half Round 3-1/2” H x 2-5/8” W x 1-1/4” Depth For 2-1/2” Half Round 5-3/8” H x 4” W x 2” Depth PART #

B

Maple

Cherry

JB-PRCB250-M

A

FINISH

JB-PRCB150-CH

REEDED UNIVERSAL CAP OR BASE

A

UNIVERSAL CAP OR BASE

A

Maple

B

For 1-1/2” Half Round 3-1/2” H x 2-5/8” W x 1-1/4” Depth For 2-1/2” Half Round 5-3/8” H x 4” W x 2” Depth PART #

FINISH

JB-PCB150-CH

Cherry

JB-PCB250-CH

Cherry

JB-PCB150-M JB-PCB250-M

Maple Maple

CAPS DECORATIVE CAP

A B

For 1-1/2” Half Round 3-5/8” H x 3-3/8” W x 1-1/2” Depth For 2-1/2” Half Round 5-1/8” H x 5-1/8” W x 2-1/8” Depth PART #

A B

JB-DC150-M JB-DC150-CH JB-DC250-M JB-DC250-CH

CARVED CAP

A B

PART #

FINISH

Maple Cherry Maple Cherry

For 1-1/2” Half Round, 1-1/4” H x 2-7/8” W x 1-3/8” Depth For 2-1/2” Half Round, 2-1/8” H x 4-1/8” W x 2” Depth

A B

JB-CC150-M JB-CC150-CH JB-CC250-M

JB-CC250-CH

FINISH Maple Cherry Maple Cherry

J-563


DESIGN A COLUMN SYSTEMS

SOLID NORTH AMERICAN HARDWOOD HALF ROUNDS, CAPS & BASES

CHERRY - 4 ft. lengths MAPLE - 8 ft. lengths

CENTER SPINDLES WEAVE CENTER SPINDLE

A B

For 1-1/2” Half Round 2-3/4” H x 2-1/4” W x 1-1/8” Depth For 2-1/2” Half Round 4-1/4” H x 3-1/2” W x 1-5/8” Depth PART #

A B

JB-WCS150-M

A B

For 1-1/2” Half Round 2-3/4” H x 2-1/4” W x 1-1/8” Depth For 2-1/2” Half Round 4-1/4” H x 3-1/2” W x 1-5/8” Depth

FINISH

PART #

Maple

A

JB-WCS150-CH Cherry JB-WCS250-M

Maple

B

JB-WCS250-CH Cherry

JB-RECS150-M

B

PART #

A B

A

B

PART #

FINISH

Maple

A

JB-RECS250-M

Maple

B

JB-RECS250-CH Cherry

JB-PCS150-M

Maple Maple

JB-DCS250-CH Cherry

PART #

FINISH

A

JB-CS150-CH

Cherry

B

JB-CS250-CH

Cherry

JB-CS150-M JB-CS250-M

FINISH

Maple

JB-PCS150-CH Cherry JB-PCS250-M

Maple

JB-PCS250-CH Cherry

CARVED CENTER SPINDLE

For 1-1/2” Half Round, 1-1/2” H x 2-1/2” W x 1-1/4” Depth For 2-1/2” Half Round, 2-1/4” H x 4-1/8” W x 2” Depth

FINISH

JB-DCS150-CH Cherry JB-DCS250-M

B

BACK VIEW OF COLUMN AND SPINDLE

For 1-1/2” Half Round 2-3/4” H x 2-1/4” W x 1-1/8” Depth For 2-1/2” Half Round 4-1/4” H x 3-1/2” W x 2” Depth

CENTER SPINDLE

For 1-1/2” Half Round 1-3/4” H x 2” W x 1” Depth For 2-1/2” Half Round 2-3/4” H x 3-1/8” W x 1-1/2” Depth JB-DCS150-M

A

JB-RECS150-CH Cherry

DECORATIVE CENTER SPINDLE

A

PLAIN CENTER SPINDLE

REEDED CENTER SPINDLE

A

B

For 1-1/2” Half Round, 1-1/2” H x 2-1/2” W x 1-1/4” Depth For 2-1/2” Half Round, 2-1/4” H x 4-1/8 ” W x 2” Depth PART #

Maple

A

Maple

B

JB-CCS150-M

FINISH

Photo compliments of Rev-A-Shelf

Maple

JB-CCS150-CH Cherry JB-CCS250-M

Maple

JB-CCS250-CH Cherry

ENDS REEDED END BLOCK

A

B

For 1-1/2” Half Round 6-5/8” H x 2-5/8” W x 1-1/4” Depth For 2-1/2” Half Round 9-7/8” H x 4” W x 2” Depth PART #

A B

J-564

PLAIN END BLOCK

A

B

For 1-1/2” Half Round, 6-5/8” H x 2-5/8” W x 1-1/4” Depth For 2-1/2” Half Round, 9-7/8” H x 4” W x 2” Depth

FINISH

JB-REB150-M Maple

JB-REB150-CH Cherry JB-REB250-M Maple JB-REB250-CH Cherry

PART #

A B

CARVED END BASE

FINISH

JB-EB150-M Maple

JB-EB150-CH Cherry JB-EB250-M Maple JB-EB250-CH Cherry

A

B

For 1-1/2” Half Round, 3-5/8” H x 2-1/4” W x 1-1/8” Depth For 2-1/2” Half Round, 5” H x 3-1/8” W x 1-1/2” Depth PART # FINISH

JB-ECB150-M

Maple

JB-ECB250-M

Maple

A

JB-ECB150-CH Cherry

B

JB-ECB250-CH Cherry


LATTICE INSERT PANELS SOLID NORTH AMERICAN HARDWOOD LATTICE INSERT PANELS Standard

Red Oak, Maple or Cherry Available in square or diagonal patterns, these inserts are ideal for cabinet door inserts, residential and commercial casework, wine cabinets, closet storage systems, entertainment centers & ceiling inserts. Sanded & ready to finish. Panel size: 35-3/4” x 24” x 3/8” thick. Cell size: 1” x 1” size, Slat size: 3/8”

Side Profile

Side Profile

Side Profile

Mini

Red Oak, Maple, Cherry, or Alder Available in a diagonal pattern, this insert makes a unique accent door in kitchen cabinets, dining room or bedroom furniture. It can also be used as a ceiling insert panel for an unusual wood grid look. Sanded & ready to finish. Panel size: 47-1/4” x 23-5/8” x 1/8” strip thickness. Cell size: 1/2” x 1/2”, Slat size: 1/2”

SWLS3524-

SWLD3524-

(Furniture Grade Quality)

(Furniture Grade Quality)

PART # FINISH PATTERN SWLD3524-RO Red Oak Diagonal SWLD3524-MP Maple Diagonal SWLD3524-CH Cherry Diagonal SWLS3524-RO Red Oak Square SWLS3524-MP Maple Square SWLS3524-CH Cherry Square

PART # FINISH PATTERN SWLM4723-RO Red Oak Diagonal SWLM4723-MP Maple Diagonal SWLM4723-CH Cherry Diagonal SWLM4723-AL Alder Diagonal

HAND CARVED HARDWOOD

DOOR PANELS

DP-001-*

13-1/2”W x 1-1/16”D x 21-1/4”H DP-001-MP (MAPLE) DP-001-WHO (WHITE OAK) DP-001-CH (CHERRY)

DP-002-*

12-7/8”W x 3/4”D x 18-7/8”H DP-002-MP (MAPLE) DP-002-WHO (WHITE OAK) DP-002-CH (CHERRY)

Available in Maple, White Oak and Cherry.

DP-006-*

12-7/8”W x 3/4”D x 18-7/8”H DP-006-MP (MAPLE) DP-006-WHO (WHITE OAK) DP-006-CH (CHERRY)

DP-007-*

12-7/8”W x 3/4”D x 18-7/8”H DP-007-MP (MAPLE) DP-007-WHO (WHITE OAK) DP-007-CH (CHERRY)

J-565


CAST IRON & CAST ALUMINUM BRACKETS

Add the perfect finishing touch of charm, romance and elegance with our cast iron and aluminum brackets. These intricately detailed architectural elements lend visual interest and appeal to your interior or exterior setting.

N EW

!

CAST IRON

CI-BKT-05

5-3/8” W x 7” H

CI-BKT-10

5-1/2” W x 7” H

CI-BKT-15

9” W x 9-1/4” H

ALL BRACKETS HAVE A 5/8” THICKNESS UNLESS NOTED ALL MEASUREMENTS ARE APPROXIMATE

CI-BKT-20 12” W x 8” H

CI-BKT-25

12-1/2” W x 7-1/4” H

CI-BKT-30

15” W x 15” H

CI-BKT-35

15-3/4” W x 15-3/4” H

CI-BKT-40

16-1/4” W x 16-1/4” H

CI-BKT-45

16-1/4” W x 17” H

CI-BKT-50 17” W x 9” H

Cast iron can be drilled using a 3/16” HSS (High Speed Steel) drill bit to start, then switching to a larger bit that coordinates with the intended hole size. Brackets do not have pre-drilled mounting holes.

J-566

CI-BKT-55

17-1/4” W x 16-3/4” H

Brackets are unfinished. Clean, prime and paint with a metal clad paint. For exterior applications, use clear coat after painting.


CAST IRON & CAST ALUMINUM BRACKETS CAST IRON

N EW

!

CI-BKT-60

17-3/4” W x 14-1/4” H

CI-BKT-65

18-1/4” W x 18-1/4” H

For photographic purposes product has been painted. ALL BRACKETS HAVE A 5/8” THICKNESS UNLESS NOTED ALL MEASUREMENTS ARE APPROXIMATE

1/2”

THICKNESS

CI-BKT-80

23” W x 8-3/16” H

CI-BKT-85

28-5/8” W x 9-5/8” H

CI-BKT-70

20-3/4” W x 20-3/4” H

CI-BKT-75

21” W x 21” H

CI-BKT-90

29” W x 10-3/4” H Cast iron can be drilled using a 3/16” HSS (High Speed Steel) drill bit to start, then switching to a larger bit that coordinates with the intended hole size. Brackets do not have pre-drilled mounting holes.

CAST ALUMINUM

CAL-BKT-5 15” W x 15” H

CAL-BKT-10

15-3/8” W x 15-3/8” H

Brackets are unfinished. Clean, prime and paint with a metal clad paint. For exterior applications, use clear coat after painting.

CAL-BKT-15

15-3/4” W x 15-3/4” H

CAL-BKT-20

22” W x 12-1/4” H

Cast aluminum brackets have weld tabs.

J-567


Steel Countertop Support Brackets When purchasing supports for countertops the discerning customer wants a high quality piece, beautifully designed with outstanding strength. This presents all these characteristics in our line of countertop brackets and corbels. We incorporate metal design expertise with ISO 9001:2008 certified manufacturing procedures to create unique supports made out of quality materials.

N EW

!

Available In: 1008 Cold Rolled Steel / Raw (treated for customer’s own painting or finishing) or 304 Stainless Steel Thickness: 1/4” (Except Where Noted) Flange Width: 2”- 3” Hole Size: Fits standard 1/4” screws/bolts The brackets have a load rating of over 1000 pounds per pair 20”

Finishes available: 304 Stainless Steel (Brushed #4) – SS 1008 Cold Rolled Steel (Raw) – CRS

GRANITE COUNTER 4” CABINET 16” BRACKET * It is suggested that no more than 4” of countertop overhangs unsupported. * * See Example *

Floating Countertop Support Brackets

Our New Jersey, New York & Maine brackets create a

floating countertop appearance with the solid strength of metal support. They give the maximum leg room, liberating you from the annoying knee knocking in cramped spaces. New Jersey brackets are best installed on the support studs in a knee wall. New York & Maine brackets are best installed on the top plate of a knee wall. NEW JERSEY PART #

CSB8-NJ-CRS CSB10-NJ-CRS CSB12-NJ-CRS * CSB14-NJ-CRS * CSB16-NJ-CRS ** CSB18-NJ-CRS ** CSB20-NJ-CRS * 3/8” Thick

Made In USA

J-568

FINISH

Siz

e

ll era Ov eight H PART #

NEW YORK

CSB8-NY-CRS CSB10-NY-CRS CSB12-NY-CRS * CSB14-NY-CRS * CSB16-NY-CRS * CSB18-NY-CRS ** CSB20-NY-CRS * 3/8” Thick

FINISH SIZE

CRS CRS CRS CRS CRS CRS CRS

OVERALL HEIGHT

8” 12” 10” 14” 12” 16” 14” 18” 16” 20” 18” 22” 20” 24” ** 1/2” Thick

SIZE

CRS 8x8 CRS 10x10 CRS 12x12 CRS 14x14 CRS 16x16 CRS 18x18 CRS 20x20 ** 1/2” Thick

All our countertop brackets are designed and produced in the United States of America. We manufacture the best supports on the market and are honored to service your countertop requirements. When you order from us you can know that your corbels will be produced with quality in mind and your satisfaction as the highest priority.

ll Overa ght ei H

Siz

MAINE e

PART #

CSB6-ME-CRS CSB6-ME-SS CSB8-ME-CRS CSB8-ME-SS CSB10-ME-CRS CSB10-ME-SS CSB12-ME-CRS CSB12-ME-SS CSB16-ME-CRS CSB16-ME-SS CSB20-ME-CRS CSB20-ME-SS

FINISH SIZE

CRS SS CRS SS CRS SS CRS SS CRS SS CRS SS

OVERALL HEIGHT

6”

10”

8”

12”

10”

14”

12”

16”

16”

20”

20”

24”


Steel Countertop Support Brackets Available In: 1008 Cold Rolled Steel / Raw (treated for customer’s own painting or finishing) or 304 Stainless Steel Thickness: 1/4” (Except Where Noted) Flange Width: 2”- 3” Hole Size: Fits standard 1/4” screws/bolts Finishes available: 304 Stainless Steel (Brushed #4) – SS 1008 Cold Rolled Steel (Raw) – CRS

The brackets have a load rating of over 1000 pounds per pair

N EW

!

IDAHO

A popular design, the decorative, curved gusset on the bracket makes for a very attractive support while giving good leg room. The gusset extends through the flanges of the brace to allow for welding on the backside of the support, giving no visible weld on the face. With a strong support capacity and an elegant appearance, these are great for all kitchen, bath and other decorative applications. PART #

ALABAMA

Distinctively beautiful. The cutout gusset gives a light appearance while the countertop provides strong support to your granite. It’s built with pride and excellent quality detail. A great hardware addition to any kitchen, bath or even office! PART #

CSB8-AL-CRS CSB8-AL-SS CSB10-AL-CRS CSB10-AL-SS CSB12-AL-CRS CSB12-AL-SS CSB14-AL-CRS CSB14-AL-SS CSB16-AL-CRS CSB16-AL-SS CSB18-AL-CRS CSB18-AL-SS CSB20-AL-CRS CSB20-AL-SS CSB24-AL-CRS CSB24-AL-SS

FINISH

CRS SS CRS SS CRS SS CRS SS CRS SS CRS SS CRS SS CRS SS

Size

8x8 10x10 12x12

CSB8-ID-CRS CSB8-ID-SS CSB10-ID-CRS CSB10-ID-SS CSB12-ID-CRS CSB12-ID-SS CSB14-ID-CRS CSB14-ID-SS CSB16-ID-CRS CSB16-ID-SS CSB18-ID-CRS CSB18-ID-SS CSB20-ID-CRS CSB20-ID-SS CSB24-ID-CRS CSB24-ID-SS

Finish

CRS SS CRS SS CRS SS CRS SS CRS SS CRS SS CRS SS CRS SS

Size

8x8 10x10 12x12 14x14 16x16 18x18 20x20 24x24

14x14 16x16 18x18 20x20 24x24

GEORGIA

NEW HAMPSHIRE

A unique style–from the rounded foot to the straight gusset with holes reminiscent of Orion’s belt. These brackets are the perfect fit for computer rooms, stylish restaurants, offices or just about anywhere you’d want, it will always look great. PART #

CSB8-NH-CRS CSB8-NH-SS CSB10-NH-CRS CSB10-NH-SS CSB12-NH-CRS CSB12-NH-SS

FINISH

CRS SS CRS SS CRS SS

Size

8x8 10x10 12x12

The perfect blend of elegant design and solid strength. The wavy gusset gives the illusion of movement even while easily supporting your countertop application. This corbel is a perfect complement to a beach front home, however it looks and works great under a countertop, bar or window ledge in any geographical location PART #

CSB8-GA-CRS CSB8-GA-SS CSB10-GA-CRS CSB10-GA-SS CSB12-GA-CRS CSB12-GA-SS CSB14-GA-CRS CSB14-GA-SS CSB16-GA-CRS CSB16-GA-SS

FINISH

CRS SS CRS SS CRS SS CRS SS CRS SS

Size

8x8 10x10 12x12 14x14 16x16

J-569


Steel Countertop Support Brackets Available In: 1008 Cold Rolled Steel / Raw (treated for customer’s own painting or finishing) or 304 Stainless Steel Thickness: 1/4” (Except Where Noted) Flange Width: 2”- 3” Hole Size: Fits standard 1/4” screws/bolts Finishes available: 304 Stainless Steel (Brushed #4) – SS 1008 Cold Rolled Steel (Raw) – CRS

The brackets have a load rating of over 1000 pounds per pair

N EW

CALIFORNIA PART #

A strong, solid support with an attractive touch. This support is unique in that is has a solid gusset for that extra support and an arrow shaped foot. This support is stylish fit in any kitchen or other application at your business or home.

CSB8-CA-CRS CSB8-CA-SS CSB10-CA-CRS CSB10-CA-SS CSB12-CA-CRS CSB12-CA-SS CSB14-CA-CRS CSB14-CA-SS CSB16-CA-CRS CSB16-CA-SS CSB18-CA-CRS CSB18-CA-SS CSB20-CA-CRS CSB20-CA-SS CSB24-CA-CRS CSB24-CA-SS

FINISH

CRS SS CRS SS CRS SS CRS SS CRS SS CRS SS CRS SS CRS SS

Size

8x8 10x10 12x12 14x14 16x16 18x18 20x20 24x24

VIRGINIA

The Virginia design presents strong supports with a classic appeal. They are designed with a straight gusset that acts as a stiffener against deflection under heavy load applications. PART #

CSB8-VI-CRS CSB8-VI-SS CSB10-VI-CRS CSB10-VI-SS CSB12-VI-CRS CSB12-VI-SS

FINISH

CRS SS CRS SS CRS SS

Size

8.5x6 10x8 12x10

These corbels are made of 1/4” steel for heavy duty support of your countertops. This corbel design has a curve shape that is formed PART # FINISH Size with no weldment CSB8-NC-CRS CRS and while giving 8x8 CSB8-NC-SS SS an attractive CSB10-NC-CRS CRS appearance also 10x10 CSB10-NC-SS SS allows for great CSB12-NC-CRS CRS space under the 12x12 CSB12-NC-SS SS bracket. These CSB14-NC-CRS CRS high quality, 14x14 wonderfully CSB14-NC-SS SS finished metal CSB16-NC-CRS CRS 16x16 corbels really CSB16-NC-SS SS hold up. CSB18-NC-CRS CRS

J-570

SS CRS SS

RHODE ISLAND

The Rhode Island design is a modern approach to a straight gusseted countertop brace. We have turned the stiffener welded between the two flanges of the bracket to that the width of the gusset is aligned with that of the flanges. These supports have a wonderful modern appeal while providing the heavy duty support strength.

PART #

CSB8-RI-CRS CSB8-RI-SS CSB10-RI-CRS CSB10-RI-SS CSB12-RI-CRS CSB12-RI-SS CSB14-RI-CRS CSB14-RI-SS CSB16-RI-CRS CSB16-RI-SS CSB18-RI-CRS CSB18-RI-SS CSB20-RI-CRS CSB20-RI-SS CSB24-RI-CRS CSB24-RI-SS

SOUTH CAROLINA

NORTH CAROLINA

CSB18-NC-SS CSB20-NC-CRS CSB20-NC-SS

!

18x18 20x20

FINISH

CRS SS CRS SS CRS SS CRS SS CRS SS CRS SS CRS SS CRS SS

If you are looking for a low profile with a high capacity support, you have come to the right place. These are designed using a solid gusset to provide additional resistance against deflection. PART #

CSB8-SC-CRS CSB8-SC-SS CSB10-SC-CRS CSB10-SC-SS CSB12-SC-CRS CSB12-SC-SS CSB14-SC-CRS CSB14-SC-SS CSB16-SC-CRS CSB16-SC-SS CSB18-SC-CRS CSB18-SC-SS CSB20-SC-CRS CSB20-SC-SS CSB24-SC-CRS CSB24-SC-SS

FINISH

CRS SS CRS SS CRS SS CRS SS CRS SS CRS SS CRS SS CRS SS

Size

8x8 10x10 12x12 14x14 16x16 18x18 20x20 24x24

Size

8x8 10x10 12x12 14x14 16x16 18x18 20x20 24x24


Steel Countertop Support Brackets Available In: 1008 Cold Rolled Steel / Raw (treated for customer’s own painting or finishing) or 304 Stainless Steel Thickness: 1/4” (Except Where Noted) Flange Width: 2”- 3” Hole Size: Fits standard 1/4” screws/bolts The brackets have a load rating of over 1000 pounds per pair

N EW

WYOMING

The Wyoming has a solid rod gusset that is curved to meet each flange of the support with a graceful elegance that is pleasing to the eye. The rod is inserted into each flange of the bracket so the weld occurs on the back of the bracket and is not visible on the counter support face. PART # FINISH CSB8-WY-CRS CRS CSB8-WY-SS SS CSB10-WY-CRS CRS CSB10-WY-SS SS CSB12-WY-CRS CRS CSB12-WY-SS SS CSB14-WY-CRS CRS CSB14-WY-SS SS CSB16-WY-CRS CRS CSB16-WY-SS SS

Size 8x8 10x10 12x12 14x14 16x16

WISCONSIN The Wisconsin design provides twice the inspirational curved rod gusset and beautifully arranged design to give your countertop an attractive enhancement. PART # CSB10-WI-CRS CSB10-WI-SS CSB12-WI-CRS CSB12-WI-SS CSB14-WI-CRS CSB14-WI-SS CSB16-WI-CRS CSB16-WI-SS

PART # FINISH CSB8-CO-CRS CRS CSB8-CO-SS SS CSB10-CO-CRS CRS CSB10-CO-SS SS CSB12-CO-CRS CRS CSB12-CO-SS SS CSB14-CO-CRS CRS CSB14-CO-SS SS CSB18-CO-CRS CRS CSB18-CO-SS SS

COLORADO The Colorado is a countertop support with a little bit of flair in a gusset design that is sleek and curvy on both the outside and the inside. The gusset attaches to each flange of this support, which are rounded off at the ends, accenting the style of the gusset. Available in sizes to support countertop overhangs ranging from 10” to 22”.

!

Finishes available: 304 Stainless Steel (Brushed #4) – SS 1008 Cold Rolled Steel (Raw) – CRS

FINISH CRS SS CRS SS CRS SS CRS SS

Size 10x10 12x12 14x14 16x16

Size 8x8 10x10 12x12 14x14 18x18

* Elevated Countertop Mounted Support Brackets NEVADA

LOUISIANA

The Louisiana, featuring a teardrop foot plate and a stylish gusset, bolts directly to the top of your counter or surface to elevate a top counter. Together these aspects create a durable support, capable of holding heavy stone or glass counters up to 18” wide. Available in 6”, 8” and 10” elevations. PART #

CSB6-LA-CRS CSB6-LA-SS CSB8-LA-CRS CSB8-LA-SS CSB10-LA-CRS CSB10-LA-SS

Size TOP FINISH Elevates Plate

CRS SS CRS SS CRS SS

6”

10X2

8”

10X2

10”

10X2

The Nevada an elevated support that mounts directly to the top of your counter. With a rounded - diamond shaped foot plate and a decorative, concave - style gusset that flares at the top, it solidly supports a dramatic heavy stone or glass floating countertop up to 18” wide. Available in 6”, 8” and 10” elevations. PART #

Size TOP FINISH Elevates Plate

CSB6-NV-CRS CRS CSB6-NV-SS SS CSB8-NV-CRS CRS CSB8-NV-SS SS CSB10-NV-CRS CRS CSB10-NV-SS SS

6”

10X2

8”

10X2

10”

10X2

* Please specify if using elevated brackets to support a glass counter top.*

J-571


Steel Countertop Support Brackets Available In: 1008 Cold Rolled Steel / Raw (treated for customer’s own painting or finishing) or 304 Stainless Steel Thickness: 1/4” (Except Where Noted) Flange Width: 2”- 3” Hole Size: Fits standard 1/4” screws/bolts The brackets have a load rating of over 1000 pounds per pair

* Elevated Support Brackets

N EW

Finishes available: 304 Stainless Steel (Brushed #4) – SS 1008 Cold Rolled Steel (Raw) – CRS

!

TEXAS

This premium mount has a weighty appearance and customized shape, which is sure to make an impression of quality. PART #

CSB20-TX-CRS CSB20-TX-SS

FINISH

Size

CRS SS

20x12

NEW MEXICO The New Mexico design is shaped to provide the appearance of a floating countertop offset with the counter. Multiple plates on the ends of the solid bar gusset provide for fixture on the stud wall or reinforced cabinetry. PART #

CSB8-NM-CRS CSB8-NM-SS CSB12-NM-CRS CSB12-NM-SS

FINISH

CRS SS CRS SS

Size

8.1x11.4 11x11

ARIZONA

These brackets are designed for the elevated application and enhance the finest of kitchens. The Arizona support’s smooth contours and serpentine profile gives this support a character all of its own. PART #

CSB10-AZ-CRS CSB10-AZ-SS CSB12-AZ-CRS CSB12-AZ-SS

FINISH

Size

CRS SS CRS SS

10x10 12x20

MASSACHUSETTS

MONTANA

An elevated countertop support bracket, the Montana Design, mounted to a cabinet or wall, is shaped to support a heavy stone or glass bar up to 12” wide. The stainless steel version matches the look and feel any other stainless steel features in your room, such as appliances or railing. PART #

CSB11-MT-CRS CSB11-MT-SS

FINISH

CRS SS

Size

11X11

This is a very versatile corbel. It has an aesthetically pleasing appearance built forsupporting elevated countertops, but looks great when attached to a standard countertop as a stylish end-piece support. Truly a masterpiece in metal. PART #

CSB8-MA-CRS CSB8-MA-SS CSB10-MA-CRS CSB10-MA-SS CSB12-MA-CRS CSB12-MA-SS

FINISH

CRS SS CRS SS CRS SS

Size

8x8 10x10 12x12

* Please specify if using elevated brackets to support a glass counter top.*

J-572


BRACKETS / SUPPORTS Work Station Brackets 1000 lbs. Per Bracket (On All Sizes) AVAILABLE IN 4 FORMICA MATCHED FINISHES OR PRIMED AND READY TO PAINT: • BLACK (-BK) FORMICA #909-58, • WHITE (-WH) FORMICA #933-58, • GRAY (-GY) FORMICA #961-58, • ALMOND (-AL) FORMICA #920-58

Width & Height of the bracket are reversible. Brackets come with pre-drilled screw holes on both sides.

• High quality 1/8” steel • 1-1/2” Forms with multiple 1/4” mounting holes per side • Larger sizes have a 3” x 3” x 45° notch to allow for wall cleat and wire clearance. • Screws not included. PART # WSB-58WSB-812WSB-1218WSB-1521WSB-1824WSB-2424WSB-2429-

SIZE CTN QTY 5” x 8” 5 pairs 8” x 12” 5 pairs 12” x 18” 3 pairs 15” x 21” 3 pairs 18” x 24” 3 pairs 24” x 24” 6 pairs 24” x 29” 2 pairs

SHELF CENTER SUPPORTS CONTEMPORARY DESIGN BACK PLATE TO CONCEAL SCREWS

FOLDING SHELF BRACKETS white enamel Epoxy painted finish.

• For drop down shelves from 8” to 24” in width. • Automatic safety locking device. • Quick release folding mechanism. • Solid rivet construction.

PART # SIZE SH-80-WH 8" x 8" SH-120-WH 12" x 12" SH-160-WH 16” x 16”

SHELF BRACKETS GrAy or white enamel porcelain painted finish.

(White)

• Six screw holes in each bracket for greater stability. • One piece construction. • Heavy gauge .0354. • Smooth edge steel. • Center rib design for greater strength. • Staggered screw mounts. • Countersunk screw holes. • Screws not included. WEIGHT

Chocolate Pearwood

• ABS plastic

• Use with 12”, 14” and 16” deep shelves

• Designed to support 150 lbs. when back plate is installed directly into a stud - REQUIRED • Unique back plate conceals all screws

• Recommended spacing of every 36” to 48”, as long as mounted to a stud Contemporary Design PART #

COLOR

VG-700-634C-WH White VG-700-634C-CP Chocolate Pearwood

CARTON QTY.

20 pieces

For Our Full Line Of Vanguard Products, See Pages 341-343

PART # SHB-34-GY SHB-34-WH SHB-45-GY SHB-45-WH SHB-56-GY SHB-56-WH SHB-68-GY SHB-68-WH SHB-810-GY SHB-810-WH SHB-1012-GY SHB-1012-WH SHB-1214-GY SHB-1214-WH

SIZE CAPACITY 3” x 4” 40 lbs. 3” x 4” 40 lbs. 4” x 5” 40 lbs. 4” x 5” 40 lbs. 5” x 6” 45 lbs. 5” x 6” 45 lbs. 6” x 8” 55 lbs. 6” x 8” 55 lbs. 8” x 10” 55 lbs. 8” x 10” 55 lbs. 10” x 12” 65 lbs. 10” x 12” 65 lbs. 12” x 14” 75 lbs. 12” x 14” 75 lbs.

J-573


“DYNAMO” COUNTERTOP SUPPORTS

Create Space

and

Storage

with

MATERIAL = SOLID CARBON STEEL Polished Chrome (PC) and Matte Chrome (MC) 2 STYLES! Straight or Angled

Style! STRAIGHT Shown in Matte Chrome

PRODUCT FEATURES:

• Variety of mounting options • Ideal for wood or glass shelves

Finishes

go

with any decor

* *Requires ultraviolet adhesive and gun

J-574

ANGLED

Shown in Polished Chrome


“DYNAMO” COUNTERTOP SUPPORTS

1

Choose a Style 1-7/8”

ANGLED 1/8”

TOP PLATE

TOP PLATE

2-3/8”

1/8”

5/16”

2-3/8”

TOP PLATE

TOP PLATE

6”

1-3/8”

BARREL

BASE PLATE

CSTD-A Shown in Polished Chrome

1-7/8”

STRAIGHT

5/16”

6”

1-3/8”

BARREL

1/8”

2-3/8”

1/8” 2-3/8”

1-3/8”

BARREL

BASE PLATE

BASE PLATE

BASE PLATE

1/8”

6”

1-3/8”

BARREL

1/8”

2-3/8”

CSTD-S Shown in Matte Chrome

15 LB. LOAD CAPACITY EACH

6”

2-3/8”

30 LB. LOAD CAPACITY EACH

TOP PLATE & BASE PLATE ARE DETACHABLE FROM THE BARREL. ALL RELEVANT MOUNTING PLATES & SCREWS ARE INCLUDED.

2

Choose a Top Mount/Top Plate

3

Choose a Base Mount Style

Ultraviolet Top Mount

*

Code = U

* Requires ultraviolet adhesive & gun

Screw Mount Base

Concealed Mount Base

Code = 88

Code = 44

4

Choose a Finish

Polished Chrome

Matte Chrome

Code = PC

Under Mount Top Plate Code = S

Code = MC

Screw On Top Mount Code = T

ORDERING EXAMPLE: Angled: CSTD-A-(2)(3)(4) Straight: CSTD-S-(2)(3)(4) 1 PART # / (STYLE)

CSTD-A-* (Angled) CSTD-S-* (Straight)

2 * TOP MOUNT

U = Ultraviolet T = Screw On S = Under Mount

3

4

* UNDER MOUNT BASE

* FINISH

44= Concealed 88 = Surface

PC = Polished Chrome MC = Matte Chrome

J-575

Architecural Elements  

architecural elements