Page 1

Introduction

The contents enclosed in this catalogue define a policy of sound commercial practice, but also accept that legislation covering the performance of products is increasing. With the introduction of BS EN ISO 9000 there is a greater tendency for large purchasers to buy from suppliers who have registered quality systems. Therefore the increasing concern for quality must reflect in our company’s products themselves. The relevant back up documentation is an important application of the quality requirement and it is our company’s policy to provide this with all its products. A strict adherence to all aspects of our company’s policies and procedures involves the total workforce which has been educated to meet these demands. Standards and Services Directed by our BS EN ISO 9000 registration, Batch Testing and Practicability Procedures are incorporated into the Standard Davico practices, and the majority of the products contained in this catalogue are tested to meet most International Standard requirements internally or externally. What is Quality? Quality as expected by Davico employees is defined in the following eight points: • Knowing the customer’s needs and expectations • Faultless construction • Certified performance and safety • Clear instruction manuals • Punctual delivery • Efficient back-up services • Feedback of field experience • Value for money The Quality Manual The Davico Quality Manual is an effective way of promoting recognition of quality throughout the company. It demonstrates the company’s ability to operate an efficient quality assurance system which will result in preventing the supply of inferior goods and services. Certificates of Conformity are essential when complying with BS EN ISO 9000 requirements. Submission of these is again a major function of the Davico organisation and creates customer confidence in the products.

2


Introduction

Technical Support With the introduction of new and continuing changes to National Standards and Specifications on performance and characteristics of product, new methods and improved procedures are being evolved to achieve this end. This takes into consideration all safety parameters of the product application. Should you require any additional information regarding product specification or application please contact our office: expert technical advice is always available, either via telephone or an onsite visit from our sales engineers. The Case for Maintenance The most important means of measuring quality is at the hands of the customer. Many products are sold to distributors, agencies and manufacturing organisations and it is with this in mind that our company will contract to repair and service all equipment supplied. The company management has developed an efficient system of two way information. To ensure customer satisfaction under this system and together with the maintenance procedures it is essential that tool calibration is conducted in accordance with the directives of BS EN ISO 9000 and other International Standards. On this basis the necessary documented evidence is provided to ensure a meaningful relationship between our company and our customers. Service and Field Information As part of the maintenance system Davico implements the following five procedures: • Monitored policy on servicing • Methods of feedback of field information to all relevant company departments • Methods of supplying up-to-date information to company field staff and customers • Procedure for handling customer complaints and return of goods • Procedures for handling incoming supplies Tool Check and Calibration It is very important that tooling compression is monitored regularly. Checks are conducted together with go and no-go gauge tolerancing. These should be implemented at a minimum of one check per year, and possibly more dependant on the number of tools in service. Correct calibration is an important function of meeting National Standards for service and maintenance. Maintenance The maintenance procedures are implemented as detailed in the Davico Quality Manual. All hand and hydraulic tools can be serviced or repaired in accordance with the requirement. Service checks include for replacement of oil seals, reservoirs, stops etc. Service reports are available and on completion Certificates of Conformity of Service are issued.

CALL +44(0)121 522 3040/520 7101

3


LD Terminals • Hand Tools • Accessories No 1 TERMINALS (INSULATED)

Also available with twin grip copper sleeve support. When ordering add TG to Part No. i.e DVR 1-4TG.

For high temperature applications Davico can supply an insulated Makrolon terminal with a working temperature of –40°C to 125°C.

Davico Terminals are designed for easy entry application as indicated.

Conductor Sizes: 0.25–1.65mm2 22–16 AWG Single Strand: 0.57–1.44 Dia.

Ring

Fork

Blade

Red Vinyl

Red Vinyl

Red Vinyl

Part Number

Dimensions mm d D L

DVR 1-3 DVR 1-3L DVR 1-3.7 DVR 1-3.7L DVR 1-4 DVR 1-4L DVR 1-5 DVR 1-6 DVR 1-8 DVR 1-10 DVR 1-12

3.2 3.2 3.7 3.7 4.3 4.3 5.3 6.4 8.4 10.5 13.0

5.7 8.0 5.7 6.6 6.6 8.0 8.0 11.6 11.6 13.6 19.3

Stud Size mm

17.3 21.0 21.0 21.0 19.6 21.0 21.0 27.0 27.0 31.1 38.0

Suitable crimping tools: DHC 15, DHC 15Y, DHCR 1, DHCR 15, DBMT 1, 3 & 4.

3.0 3.0 3.5 3.5 4.0 4.0 5.0 6.0 8.0 10.0 12.0

Part Number

Dimensions mm d D L

DVF 1-3 DVF 1-3N DVF 1-3W DVF 1-4N DVF 1-4 DVF 1-4W DVF 1-5 DVF 1-6

3.2 3.7 3.7 4.3 4.3 4.3 5.3 6.4

5.7 6.4 7.2 6.4 7.2 8.1 9.5 12.0

Stud Size mm

Part Number

D

Dimensions mm W

L

3.0 3.5 3.5 4.0 4.0 4.0 5.0 6.0

DVB 1-10 DVB 1-18 DVB 1-11 DVB 1-14

10.4 18.4 11.1 14.5

2.3 2.3 3.0 3.0

19.4 27.5 20.1 23.5

21.2 21.2 21.2 21.2 21.2 21.2 21.2 27.7

Hooked Blade Red Flared Vinyl

Flanged Fork Red Vinyl Part Number

Dimensions mm d D L

DVF 1-3F DVF 1-4F DVF 1-5F

3.7 4.3 5.3

7.6 7.6 8.5

Stud Size mm

23.7 23.7 23.7

Suitable crimping tools: DHC 15, DHC 15Y, DHCR 1, DHCR 15, DBMT 1, 3 & 4.

3.5 4.0 5.0

Part Number

D

Dimensions mm W

L

DVB 1-13H DVB 1-17H

13.0 16.75

3.0 4.6

27.2 28.2

Suitable crimping tools: DHC 15, DHC 15Y, DHCR 1, DHCR 15, DBMT 1, 3 & 4.

Pin Red Vinyl Part Number

D

Dimensions mm W

L

DVP 1-9 DVP 1-12

1.9 1.9

9.0 12.0

18.5 21.2

Suitable crimping tools: DHC 15, DHC 15Y, DHCR 1, DHCR 15, DBMT 1, 3 & 4. 6


LD Terminals • Hand Tools • Accessories

No 1 TERMINALS (NON INSULATED) Conductor Sizes: 0.25–1.65mm2 22–16 AWG Single Strand: 0.57–1.44 Dia.

Ring

Blade

Fork

Part Number

Dimensions mm d D L

DR 1-3 DR 1-3L DR 1-3.7 DR 1-3.7L DR 1-4 DR 1-4L DR 1-5 DR 1-6 DR 1-8 DR 1-10 DR 1-12

3.2 3.2 3.7 3.7 4.3 4.3 5.3 6.4 8.4 10.5 13.0

5.7 8.0 5.7 6.6 6.6 8.0 8.0 11.6 11.6 13.6 19.3

12.6 15.8 12.6 15.8 14.4 15.8 15.8 21.8 21.8 25.5 31.0

Suitable crimping tools: DHC 15, DHCR 0516, DHCR 1510, DHCR 1516, DBMT 1, 3 & 4.

Stud Size mm

Part Number

Dimensions mm d D L

3.0 3.0 3.5 3.5 4.0 4.0 5.0 6.0 8.0 10.0 12.0

DF 1-3 DF 1-3N DF 1-3W DF 1-4N DF 1-4 DF 1-4W DF 1-5 DF 1-6

3.2 3.7 3.7 4.3 4.3 4.3 5.3 6.4

5.7 6.4 7.2 6.4 7.2 8.1 9.5 12.0

16.0 16.0 16.0 16.0 16.0 16.0 16.0 22.0

Stud Size mm

Part Number

3.0 3.5 3.5 4.0 4.0 4.0 5.0 6.0

DB 1-10 DB 1-18 DB 1-11 DB 1-14

D

Dimensions mm W

L

10.4 18.4 11.1 14.5

2.3 2.3 3.0 3.0

15.2 23.2 15.9 19.3

Hooked Blade Flanged Fork Part Number

Dimensions mm d D L

DF 1-3F DF 1-4F DF 1-5F

3.7 4.3 5.3

7.6 7.6 8.5

13.1 13.1 13.1

Stud Size mm 3.5 4.0 5.0

Part Number

D

Dimensions mm W

L

DB 1-13H

13.0

3.0

23.0

Suitable crimping tools: DHC 15, DHCR0516, DHCR 1510, DHCR 1516, DBMT 1, 3 & 4.

Suitable crimping tools: DHC 15, DHCR 0516, DHCR 1510, DHCR 1516, DBMT 1, 3 & 4.

Pin Part Number

D

Dimensions mm W

L

DP 1-9 DP 1-12

1.9 1.9

9.0 12.0

14.3 17.0

Suitable crimping tools: DHC 15, DHCR 0516, DHCR 1510, DHCR 1516, DBMT 1, 3 & 4.

CALL +44(0)121 522 3040/520 7101

7


LD Terminals • Hand Tools • Accessories No 2 TERMINALS (INSULATED)

Also available with twin grip copper sleeve support. When ordering add TG to Part No. i.e DVR 2-4TG.

For high temperature applications Davico can supply an insulated Makrolon terminal with a working temperature of –40°C to 125°C.

Davico Terminals are designed for easy entry application as indicated.

Conductor Sizes: 1.04–2.63mm2 16–14 AWG Single Strand: 1.14–1.82 Dia.

Ring

Fork

Blade

Blue Vinyl

Blue Vinyl

Blue Vinyl

Part Number

Dimensions mm d D L

DVR 2-3 DVR 2-3L DVR 2-3.7 DVR 2-3.7L DVR 2-4 DVR 2-4L DVR 2-5 DVR 2-5L DVR 2-6 DVR 2-8 DVR 2-10 DVR 2-12

3.2 3.2 3.7 3.7 4.3 4.3 5.3 5.3 6.4 8.4 10.5 13.0

6.6 8.5 6.6 6.6 6.6 8.5 8.5 9.5 12.0 12.0 13.6 19.0

Suitable crimping tools: DHC 15, DHC 15Y, DHCR 2, DHCR 15, DBMT 1, 3 & 4.

17.3 22.0 17.3 22.0 19.6 22.0 22.0 22.0 27.1 27.1 29.7 35.2

Stud Size mm 3.0 3.0 3.5 3.5 4.0 4.0 5.0 5.0 6.0 8.0 10.0 12.0

Part Number

Dimensions mm d D L

DVF 2-3 DVF 2-3N DVF 2-3W DVF 2-4N DVF 2-4 DVF 2-4W DVF 2-5 DVF 2-6

3.2 3.7 3.7 4.3 4.3 4.3 5.3 6.4

5.7 6.4 7.2 6.4 7.2 8.1 9.5 12.0

21.2 21.2 21.2 21.2 21.2 21.2 21.2 27.7

Stud Size mm

Part Number

D

Dimensions mm W

L

3.0 3.5 3.5 4.0 4.0 4.0 5.0 6.0

DVB 2-9 DVB 2-18

9.0 18.4

2.8 2.3

17.7 27.4

D

Dimensions mm W

L

13.0 16.75

3.0 4.6

27.2 27.2

Hooked Blade Blue Flared Vinyl Part Number DVB 2-13H DVB 2-17H

Flanged Fork Blue Vinyl Part Number

Dimensions mm d D L

DVF 2-3F DVF 2-4F DVF 2-5F

3.7 4.3 5.3

7.6 7.6 8.5

23.7 23.7 23.7

Stud Size mm 3.5 4.0 5.0

Suitable crimping tools: DHC 15, DHC 15Y, DHCR 2, DHCR 15, DBMT 1, 3 & 4.

Suitable crimping tools: DHC 15, DHC 15Y, DHCR 2, DHCR 15, DBMT 1, 3 & 4.

Pin Blue Vinyl Part Number

D

Dimensions mm W

L

DVP 2-9 DVP 2-12

1.9 1.9

9.0 12.0

18.5 21.2

Suitable crimping tools: DHC 15, DHC 15Y, DHCR 2, DHCR 1, 3 & 4.

8


LD Terminals • Hand Tools • Accessories

No 2 TERMINALS (NON INSULATED) Conductor Sizes: 1.04–2.63mm2 16–14 AWG Single Strand: 1.14–1.82mm Dia

Ring

Blade

Fork

Part Number

Dimensions mm d D L

DR 2-3 DR 2-3L DR 2-3.7 DR 2-3.7L DR 2-4 DR 2-4L DR 2-5 DR 2-5L DR 2-6 DR 2-8 DR 2-10 DR 2-12

3.2 3.2 3.7 3.7 4.3 4.3 5.3 5.3 6.4 8.4 10.5 13.0

6.6 8.5 6.6 6.6 6.6 8.5 8.5 9.5 12.0 12.0 13.6 19.0

12.3 16.8 16.8 16.8 14.4 16.8 16.8 16.8 21.8 21.8 25.5 31.0

Suitable crimping tools: DHC 15, DHCR 0516, DHCR 1510, DHCR 1516, DBMT 1, 3 & 4.

Stud Size mm

Part Number

Dimensions mm d D L

3.0 3.0 3.5 3.5 4.0 4.0 5.0 5.0 6.0 8.0 10.0 12.0

DF 2-3 DF 2-3N DF 2-3W DF 2-4N DF 2-4 DF 2-4W DF 2-5 DF 2-6

3.2 3.7 3.7 4.3 4.3 4.3 5.3 6.4

5.7 6.4 7.2 6.4 7.2 8.1 9.5 12.0

14.5 15.4 16.0 15.4 16.0 16.8 16.8 22.0

Stud Size mm

Part Number

3.0 3.5 3.5 4.0 4.0 4.0 5.0 6.0

DB 2-9 DB 2-18

Flanged Fork Part Number

Dimensions mm d D L

DF 2-3F DF 2-4F DF 2-5F

3.7 4.3 5.3

7.6 7.6 8.5

14.0 14.0 14.0

Stud Size mm

D

Dimensions mm W

L

9.0 18.4

2.8 2.3

13.3 23.2

Hooked Blade Part Number

D

Dimensions mm W

L

DB 2-13H

13.0

3.0

23.0

Suitable crimping tools: DHC 15, DHCR0516, DHCR 1510, DHCR 1516, DBMT 1, 3 & 4.

3.5 4.0 5.0

Suitable crimping tools: DHC 15, DHCR 0516, DHCR 1510, DHCR 1516, DBMT 1, 3 & 4.

Pin Part Number

D

Dimensions mm W

L

DP 2-9 DP 2-12

9.0 12.0

1.9 1.9

14.3 17.0

Suitable crimping tools: DHC 15, DHCR 0516, DHCR 1510, DHCR 1516, DBMT 1, 3 & 4.

CALL +44(0)121 522 3040/520 7101

9


LD Terminals • Hand Tools • Accessories Davico Terminals are designed for easy entry application as indicated.

No 5 TERMINALS (INSULATED)

Also available with twin grip copper sleeve support. When ordering add TG to Part No. i.e DVR 5-4TG.

For high temperature applications Davico can supply an insulated Makrolon terminal with a working temperature of –40°C to 125°C.

Conductor Sizes: 2.63–6.64mm2 12–10 AWG Single Strand: 1.82–2.89 Dia.

Ring

Fork

Yellow Vinyl

Yellow Vinyl

Part Number

Dimensions mm d D L

DVR 5-3 DVR 5-3.7 DVR 5-4 DVR 5-4L DVR 5-5 DVR 5-5L DVR 5-6 DVR 5-6L DVR 5-8 DVR 5-8L DVR 5-10 DVR 5-12

3.2 3.7 4.3 4.3 5.3 5.3 6.4 6.4 8.4 8.4 10.5 13.0

7.2 7.2 7.2 9.5 9.5 12.0 12.0 15.0 12.0 15.0 15.0 19.2

Stud Size mm

20.9 20.9 20.9 25.0 25.0 31.0 31.0 33.2 33.2 33.2 33.2 37.6

3.0 3.5 4.0 4.0 5.0 5.0 6.0 6.0 8.0 8.0 10.0 12.0

Suitable crimping tools: DHC 15, DHC 15Y, DHCR 5, DHCR 15, DBMT 1, 3 & 4.

Part Number

Dimensions mm d D L

DVF 5-3 DVF 5-4 DVF 5-4W DVF 5-5 DVF 5-6

3.2 4.3 4.3 5.3 6.4

8.3 8.3 9.0 9.0 12.0

Stud Size mm

25.2 25.2 23.9 23.9 31.2

3.5 4.0 4.0 5.0 6.0

Suitable crimping tools: DHC 15, DHC 15Y, DHCR 5, DHCR 15, DBMT 1, 3 & 4

Blade Yellow Vinyl

Pin

Part Number

W

Dimensions mm D

L

DVB 5-10 DVB 5-14

2.8 4.5

10.0 14.0

20.4 26.0

Yellow Vinyl Part Number

W

Dimensions mm D

L

DVP 5-14

2.9

14.0

27.2

Suitable crimping tools: DHC 15, DHC 15Y, DHCR5, DHCR 15, DBMT 1, 3 & 4

10

Hooked Blade Yellow Flared Vinyl Part Number DVB 5-13H DVB 5-17H

D

Dimensions mm W

L

3.0 4.6

17.2 17.2

30.2 30.2


LD Terminals • Hand Tools • Accessories

No 5 TERMINALS (NON INSULATED) Conductor Sizes: 2.63–6.64mm2 12–10 AWG Single Strand: 1.82–2.89mm Dia.

Ring

Fork

Part Number

Dimensions mm d D L

DR 5-3 DR 5-3.7 DR 5-4 DR 5-4L DR 5-5 DR 5-5L DR 5-6 DR 5-6L DR 5-8 DR 5-8L DR -10

3.2 3.7 4.3 4.3 5.3 5.3 6.4 6.4 8.4 8.4 10.5

7.2 7.2 7.2 9.5 9.5 12.0 12.0 15.0 15.0 15.0 15.0

15.7 15.7 15.7 19.8 19.8 25.8 25.8 28.0 28.0 28.0 28.0

Stud Size mm

Part Number

Dimensions mm d D L

3.0 3.5 4.0 4.0 5.0 5.0 6.0 6.0 8.0 8.0 10.0

DF 5-3 DF 5-4 DF 5-4W DF 5-5 DF 5-6

3.2 4.3 4.3 5.3 6.4

8.3 8.3 9.0 9.0 12.0

Stud Size mm

19.5 19.5 18.2 18.2 25.5

3.5 4.0 4.0 5.0 6.0

Suitable crimping tools: DHC 15, DHCR 0516, DHCR 15N, DHCR 1510, DBMT 1, 3 & 4.

Blade Suitable crimping tools: DHC 15, DHCR 0516, DHCR 15N, DHCR 1510, DBMT 1, 3 & 4.

Part Number

W

Dimensions mm D

L

DB 5-10

2.8

10.0

16.2

Suitable crimping tools: DHC 15, DHCR 0516, DHCR 15N, DHCR 1510, DBMT 1, 3 & 4.

Pin Part Number

W

Dimensions mm D

L

DB 5-14

2.9

14.0

20.0

Suitable crimping tools: DHC 15, DHCR 0516, DHCR 15N, DHCR 1510, DBMT 1, 3 & 4.

CALL +44(0)121 522 3040/520 7101

11


LD Terminals • Hand Tools • Accessories CONNECTORS (INSULATED AND NON INSULATED)

Conductor Sizes: Red 0.25–1.65mm2 Blue 1.04–2.63mm2 Yellow 2.63–6.64mm2

Butt (Insulated)

Parallel (Insulated) Part Number DVPC1 DVPC2 DVPC5

Dimensions mm d D L 1.7 2.3 3.4

3.3 4.0 5.5

16.0 16.0 20.5

Vinyl Colour

Part Number

Red Blue Yellow

DVBC1 DVBC2 DVBC5

Dimensions mm d D L 1.7 2.3 3.4

3.3 4.0 5.5

Vinyl Colour

22.7 22.7 26.7

Red Blue Yellow

Suitable crimping tools: Red: DHC 15, DHC 1 5Y, DHCR 1, DHCR 15, DBMT 1, 3 & 4. Blue: DHC 15, DHC 15Y, DHCR 2, DHCR 15, DBMT 1, 3 & 4.

Parallel (Non Insulated) Part Number DPC1 DPC2 DPC5

Yellow: DHC 15, DHC 15Y, DHCR 5, DHCR 15, DBMT 1, 3 & 4.

d

Dimensions mm D

L

1.7 2.3 3.4

3.3 4.0 5.5

8.0 8.0 8.5

Closed End (Insulated) Part Number DN 1-CEC DN 2-CEC DN 5-CEC

Butt (Non Insulated) Part Number DBC1 DBC2 DBC5

12

Dimensions mm d D L 4.9 5.7 7.2

6.4 6.6 9.4

15.3 15.3 17.7

Conductor Size mm2 1.0–1.75 1.0–2.5 2.0–5.5

Suitable crimping tools:

d

Dimensions mm D

L

1.7 2.3 3.4

3.3 4.0 5.5

15.0 15.0 15.0

DHCR-HS, DHC 15, DHCR 15, DBMT 1, 3 and 4.


LD Terminals • Hand Tools • Accessories

PUSH ON TERMINALS (INSULATED AND NON INSULATED)

Female

Female

Male

Vinyl insulated

Vinyl insulated

Vinyl insulated

Part Number

Part Number

Part Number

Conductor To Suit Colour Size mm2 width mm

DVPO1-2.8F5 DVPO1-2.8F8 DVPO1-4.8F5 DVPO1-4.8F8 DVPO1-6.3F DVPO2-4.8F5 DVPO2-4.8F8 DVPO2-6.3F DVPO2-8.0F DVPO5-6.3F DVPO5-9.5F

0.25–1.65 0.25–1.65 0.25–1.65 0.25–1.65 0.25–1.65 1.04–2.63 1.04–2.63 1.04–2.63 1.04–2.63 2.63–6.64 2.63–6.64

2.8 x 0.5 2.8 x 0.8 4.8 x 0.5 4.8 x 0.8 6.3 4.8 x 0.5 4.8 x 0.8 6.3 8.0 x 0.8 6.3 9.5

Red Red Red Red Red Blue Blue Blue Blue Yellow Yellow

*DNFP01-2.8F5 *DNFP01-2.8F8 DVFP01-4.8F5 DVFP01-4.8F8 DVFP01-6.3F DVFP02-4.8F5 DVFP02-4.8F8 DVFP02-6.3F DVFP05-6.3F DVFP05-9.5F

Conductor To Suit Colour Size mm2 width mm 0.25-1.65 0.25-1.65 0.25-1.65 0.25-1.65 0.25-1.65 1.04-2.63 1.04-2.63 1.04-2.63 2.63-6.64 2.63-6.64

2.8 x 0.5 Red 2.8 x 0.8 Red 4.8 x 0.5 Red 4.8 x 0.8 Red 6.3 Red 4.8 x 0.5 Blue 4.8 Blue 6.3 Blue 6.3 Yellow 6.3 Yellow

Dimensions mm Conductor Colour W T L Size mm2

DVPO 1-4.8M DVPO 1-6.3M DVPO 2-4.8M DVPO 2-6.3M DVPO 5 6.3M

4.75 6.35 4.75 6.35 6.35

0.8 0.8 0.8 0.8 0.8

9.5 9.5 9.5 9.5 9.5

0.25 x 1.65 Red 0.25 x 1.65 Red 1.04 x 2.63 Blue 1.04 x 2.63 Blue 2.63 x 6.64 Yellow

Suitable crimping tools: Red: DHC 15, DHC 15Y, DHCR 1, DHCR 15, DBMT 1, 3 & 4 Blue: DHC 15, DHC 15Y, DHCR 2, DHCR 15, DBMT 1, 3 & 4 Yellow: DHC 15, DHC 15Y, DHCR5, DHCR 15, DBMT 1, 3 & 4

*DNFPO Nylon Insulated Suitable crimping tools: Red: DHC 15, DHC 15Y, DHCR 1, DHCR 15, DBMT 1, 3 &4 Blue: DHC 15, DHC 15Y, DHCR 2, DHCR 15, DBMT 1, 3 & 4 Yellow: DHC 15, DHC 15Y, DHCR 5, DHCR 15, DBMT 1, 3 & 4

Female Part Number DP01-2.8F5 DP01-2.8F8 DP01-4.8F5 DP01-4.8F8 DP01-6.3F DP02-4.8F5 DP02-4.8F8 DP02-6.3F DP05-6.3F DP05-9.5F

Male Conductor Size mm2

To Suit width mm

0.25 1.65 0.25 1.65 0.25 1.65 0.25 1.65 0.25 1.65 1.04 2.63 1 04 2.63 1.04 2.63 2.63 6.64 2.63 6.64

2.8 x 0.5 2.8 x 0.8 4.8 x 0.5 4.8 x 0.8 6.3 4.8 x 0.5 4.8 x 0.8 6.3 6.3 9.5

Part Number

Dimensions mm d D L

DPO 1-4.8M 4.75 DPO 1-6.3M 6.35 DPO 2-6.3M 6.3

0.5 0.8 6.3

6.35 9.5 9.5

Conductor Size mm2 0.3–0.75 0.5–2.0 1.0–2.5

Suitable crimping tools: DHCF 15, DHCRF 15, DBMT 1, 3 and 4

Suitable crimping tools: DHCF 15, DHCRF 15, DBMT 1, 3 & 4.

CALL +44(0)121 522 3040/520 7101

13


LD Terminals • Hand Tools • Accessories PUSH ON TERMINALS (INSULATED AND NON INSULATED) For Insulated Disconnect Terminals without copper sleeve please add NTG to the end of part number i.e. DVPO 1 6.3F NTG These adaptors are to suit all 6.3mm (0.250”) Series push on terminals.

Male/Female Piggyback Adaptors

Interlocking Nylon Disconnectors (Non Twin Grip)

Vinyl insulated

Fully insulated

Part Number

Conductor Size mm2

Colour

DVPOA 1-6.3 0.25–1.65 Red DVPOA 2-6.3 1.04–2.63 Blue DVPOA 5-6.3 2.63–6.64 Yellow Suitable crimping tools: Red DHC 15, DHC 15Y, DHCR 1, DHCR 15, DBMT 1, 3 & 4. Blue DHC 15, DHC 15Y, DHCR 2, DHCR 15, DBMT 1, 3 & 4. Yellow DHC 15, DHC 15Y, DHCR 5, DHCR 15, DBMT 1, 3 & 4.

Part Number

To Suit Width mm2

Male/ Female

Part Number

6.3 6.3 6.3 6.3 6.3 6.3

Female Male Female Male Female Male

DVC 2.8 DVC 4.g DVC 6.3 1 DVC 6.3 2 DVC 9.5

DVFPO 1-6.3FIT DVFPO 1-6.3MIT DVFPO 2-6.3FIT DVFPO 2-6.3MIT DVFPO 5-6.3FIT DVFPO 5-6.3MIT

Suitable crimping tools: DHCR 15, DHCR HS.

Part Number

Conductor Size mm2

DPOA 1 6.3 DPOA 2 6.3 DPOA 5 6.3

0.25–1.65 1.04–2.63 2.63–6.64

Suitable crimping tools: DHCF 15, DHCRF 15, DBMT 1, 3 & 4.

Part Number

Conductor Size mm2

Colour

DNFPO 1-6.3 FLAG DNFPO 2-6.3 FLAG DNFPO 1-4.8 FIAG DNFPO 2-4.8 FLAG

0.25-1.65 1.04-2.63 0.25-1.65 1.04-2.63

Red Blue Red Blue

Suitable crimping tool: DHCR-FL

Non Crimp Adaptor Part Number DPOA 6.3 14

Dimensions mm A C 2.8 2.4 2.8 5.6 x 2.0 4.8

4.0 x 2.4 5.2 x 2.0 8.0 x 2.0 8.0 x 2.0 10.3 x 4.0

For use with: DVC 2.8

2.8 Push On (0.110")

DVC 6 3 1

6.3 Push On (0.250")

DVC 6 3 2

6.3 Push On (0.250")

DVC 9.5

9.5 Push On (0.375")

Flag Terminal Type PVC Insulating Covers

Female Nylon Flag Disconnectors

Non insulated

Push-on Terminal Type PVC Insulating Covers

Part Number DVC6.3 FLAG

Width mm

6.3

Female Flag Disconnector Part Number DPO1-6.3 FLAG

To suit Width mm 6.3


LD Terminals • Hand Tools • Accessories CORD END TERMINALS (INSULATED) In accordance with DIN Standard 46228 Part 4 suitable for tri-rated cables. * Denotes Standard Stock Items. CODE T (FRENCH)

CODE W (GERMAN)

Part Number DICE1125 DICE1134 DICE0505/M DICE0505 DICE0505/L

Colour

* Violet * Pink

Part Number PET1125 PET1134

* White

PET0505/M PET0505 PET0505/L

DICE7575/M

PET7575/M

DICE7575

* Blue

PET7575

DICE7575/L DICE7575/XL

PET7575/L PET1010/M

DICE1010

PET1010

* Red

DICE1010/XL DICE 1515/M

Black

Grey

L1 10.4

L2 6.0

0.8

0.15

2.0

0.25

10.4

6.0

* Orange

1.0

0.15 2.65

0.25

12.0 14.0 16.0

6.0 8.0 10.0

0.25

12.4 14.6 16.4 18.4

6.0 8.2 10.0 12.0 6.0 8.2 10.0 12.0

* White

*

Orange

*

0 15

30

Yellow

1.0

1.4

0.15

3.3

0.25

12.4 14.6 16.4 18.4

Red

1.5

1.7

0.15

3.5

0.25

14.6 16.4 24.4

8.2 10.0 18

15.2

8.2

19.0

12.0

25.0

18.0

16.5

9.0

16.5

12.0

25.5

18.0

20.0

12.0

26.0

18 0

21.5

12.0

27.5

18.0

22.2

12.0

28.2

18.0

29.0

16.0

35.0

22.0

Blue

2.5

2.2

0.15

4.0

0.25

*

PET4040/

Grey

PET6060

4.0

28

02

45

03

* Black

6.0

3.5

0.2

63

0.3

PET6060/L

*

PET0010 Brown

*

Ivory

10.0

4.5

0.2

7.6

0.4

PET0010/L PET0016

*

*

Ivory DICE0016/L

Green

16.0

5.8

0.2

8.8

0.4

PET0016/L

PET0025

* Black

16

12

*

Green

DICE0010/L

DICE0025/L

0.75

PET4040/XL

DICE6040/L

DICE0025

0.5

*

PET2525/L

PET4040

*

DICE4040/XL

DICE0016

S2 0.25

PET2525/XL

DICE4040/L

DICE0010

d3 2.0

PET 1515/L PET 1515/XL PET2525

*

DICE2525/XL

DICE6040

S1 0.15

PET1010/L PET 1515/M

*

DICE2525/L

DICE4040

d1 0.8

PET1010/XL

DICE 1515/L DICE 1515/XL DICE2525

Colour mm2 0.25 * Lt Blue * Turquoise 0.34

PET7575/XL

DICE1010/M DICE 1010/L

Size mm

* Brown

PET0025/L

25.0

7.3

0.2

11.2

0.4


CODE T (FRENCH)

Size mm

CODE W (GERMAN)

Part Number

Colour

DICE0035

Colour

Part Number PET0035

*

d1

S1

d3

S2

L1

Beige

35

8.3

0.3

12.7

0.4

28.4 25.0

PET0035/L

DICE0050

PET0050

*

20.0

* Olive

Blue DICE0050/L

L2 16.0

*

Red DICE0035/L

mm2

50

10.3

0.3

15.0

0.5

34.0

PET0050/L

25.0

DICE0070

* Yellow

70

13.5

0.3

16.0

0.5

35.0

20.0

DICE0095

* Red

95

14.5

0.7

16.0

0.5

42.0

25.0

CORD END TERMINALS

CORD END TERMINALS (INSULATED WITH PARALLEL SLEEVE)

(NON INSULATED)

Din Standard Colour Scheme, French & German can be supplied to order.

In accordance with DIN Standard 46228 Part 1. Suitable for Tri rated cables.

Code Part Number

Colour

Cable Size Part Number mm2

DICE2005 DICE2075 DICE2010 DICE2015 DICE2025 DICE2040 DICE2060 DICE2100 DICE2160

White 2 x 0.5 Grey 2 c 75 Red 2 x 1.0 Black 2 x 1.5 Blue 2 x 2.5 Lt Grey 2 x 4.0 Yellow 2 x 6.0 Red 2 x 10.0 Blue 2 x 16.0

mm

2

dl

S1

1.5 1.8 2.0 2.3 2.9 3.8 4.9 6.5 37

0.15 O 15 0.15 0.15 0.15 0.20 0.20 0.20 0.20

Suitable Crimping Tools DCER 510, DCER 1635, DCE 025, DCE 516.

Sizes mm d3 d2 5.6 62 6.0 7.2 8.5 9.2 10.5 13.0 19.3

3.6 36 4.0 4.2 5.0 5.7 6.8 8.0 10 5

S2

L1

L2

0.25 0 75 0.30 0.30 0.30 0.35 0.35 0.40 0.40

15.0 15 0 15.0 16.0 18.0 23.0 24.0 26.0 31.0

8.0 80 8.0 8.0 10.0 12 0 14.0 14.0 14 0

DUCE0505 DUCE7575 DUCE1010 DUCE1515 DUCE2525 DUCE4040 DUCE6040 DUCEOO10 DUCE0016 DUCE0025 DUCE0035 DUCE0050 DUCE0070 DUCE0095

0.5 0.75 1.00 1.50 2.50 4.00 6.00 10.00 16.00 25.00 35.00 50.00 70.00 95.00

L2

D1

S1

6.00 10.00 10.00 10.00 12.00 12.00 15.00 15.00 15.00 15.00 20.00 22.00 26.00 30.00

1.00 1.4 1.6 1.8 2.3 2.8 3.6 4.5 5.8 7.3 8.3 10.3 12.6 15.2

0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.30 0.30 0.30 0.40

CALL +44(0)121 522 3040/520 7101

17


LD Terminals • Hand Tools • Accessories AUTO BULLET AND SOCKET CONNECTORS Brass Bullet

Use indent ratchet tool DHCRBT

Double Female Socket Connector Part Number DAB

D

Dimensions mm L d

4.6

11.5

1.95

For use with Brass Bullet DAB

BLACK VINYL Part Number

Dimensions mm

DVSC2

d

L

4.5

30.0

For use with Brass Bullet DAB

Single Female Socket Connector AUTO BULLET

BLACK VINYL Part Number DVSC1

d

L

4.5

30.0

For use with Brass Bullet DAB

BRASS TABS

Male

Dimensions mm

VINYL INSULATED Part Number

Dimensions mm Conductor A B D Size mm2 Colour

DVAB1M DVAB2M DVAB2M4 DVAB5M

9.0 9.0 11 9.0

23.0 23.0 23.0 23.0

4.0 5.0 4.0 5.0

0.25–1.65 Red 1.04–2.63 Blue 1.04–2.63 Blue 2.63–6.64 Yellow

Female

FULLY VINYL INSULATED Part Dimensions mm Conductor Number A L Size mm2 Colour DVAB1F DVAB2F DVAB2F4 DVAB5F

18

9.0 9.0 14 9.0

26.0 26.0 26.0 26.0

0.25–1.65 Red 1.04–2.63 Blue 1.04–2.63 Blue 2.63–6.64 Yellow


LD Terminals • Hand Tools • Accessories PNEUMATIC CRIMPING EQUIPMENT

TYPE DBMT 3A

SPECIFICATIONS

A bench mounted air operated crimping tool suitable for crimping many types of terminal up to 6.0 sq mm.

Air Pressure

Will accept all jaw sets as detailed below. Reduces operator fatigue on volume output. The foot pedal control automatically adjusts jaw closing time longer or shorter so that each crimp is consistent regardless of operator. Jaws are sold separately (see below).

JAW PART NUMBER

80–115 PSi

Air Consumption 34L/min at 30 crimps per min Dimensions

190 (L) x 99 (H) x 92 (W) mm

Weight

2.5Kgs

CABLE RANGE

TERMINAL

DBMT3A-NI

0.5 TO 6.0 SQ MM

NON INSULATED

DBMT3A-PE1

0.5 TO 6.0 SQ MM

INSULATED

DBMT3A-UPO 6.3

0.5 TO 6.0 SQ MM

OPEN BARREL

DBMT3A-CE1

0.5 TO 4.0 SQ MM

CORD END

DBMT3A-CE3

6 TO 10 SQ MM

CORD END

COPPER WIRE

6 DIA

ALUMINIUM WIRE

7 DIA

DBMT3CT (CUTTER)

20

CRIMP SAMPLE


LD Terminals • Hand Tools • Accessories HAND CRIMPING TOOLS (WITH CONTROLLED CALIBRATING DEVICES)

The Davico range of hand crimping tools has been selected to comply with all variations to customer specification and have the added advantage of compressing other manufacturers terminals.

DHCR 10

Triple Jaw Ratchet Tool with controlled calibration suitable for crimping miniature insulated terminals 0.05 to 2.55 sq. mm.

DHCR 15

Triple Jaw Ratchet Indent Tool with controlled calibration suitable for crimping 0.25 to 6 sq. mm insulated terminals.

DHCR 1516

Four Jaw Ratchet Tool for with controlled calibration suitable for crimping 1.5 to 16 sq. mm Davico copper tube terminals.

DHCRF 15

Triple Jaw Ratchet Tool with controlled calibration suitable for crimping non insulated male/female disconnect terminals with ‘F’ crimp configuration.

DHCRF 025

Double Jaw Ratchet Tool with controlled calibration suitable for ‘F’ crimp type miniature terminals/pins 0.102 to 0.25 sq. mm.

DHCRF 05

Double Jaw Ratchet Tool with controlled calibration suitable for ‘F’ crimp type miniature terminals 0.12 to 0.5 sq. mm.

DCER 510

Six Jaw Ratchet Tool with controlled calibration suitable for crimping insulated and non insulated cord end terminals 0.5 to 10 sq. mm.

DCER 1635

Triple Jaw Ratchet Tool with controlled calibration suitable for crimping non insulated and insulated cord end terminals 16, 25 and 35 sq. mm.

DHCR – HS

Triple Jaw Ratchet Tool with controlled calibration suitable for crimping insulated heat shrink prior to application of heat gun. The compression ratio has no detrimental effect on the heatshrink insulation 0.25 to 6 sq. mm.

DHCR – FL

Double Jaw Ratchet Tool with controlled calibration suitable for crimping fully insulated nylon right angle flag terminals 0.25 to 2.5 sq. mm.

DHCR – CA

Ratchet Tool for co-axial cables with controlled calibration jaw sets RG58/RG59 but other sets are available.

THE ABOVE TOOLS CAN BE CALIBRATED MANUALLY AND PROVED IN ACCORDANCE WITH ALL INTERNATIONAL STANDARDS 24


Standard Industrial Terminals Ring

Part Number ERR3 ERR3.7 ERR4 ERR5 ERR6 ERR8 ERR10 ERR12

Ring

Stud Size 3mm 3.7mm 4mm 5mm 6mm 8mm 10mm 12mm

Spade

Part Number ERF3 ERF3N ERF4N ERF5 ERF6

Ring

Part Number

Stud Size 3mm 3.7mm 4mm 5mm 6mm 8mm 10mm 12mm

EBR3 EBR3.7 EBR4 EBR5 EBR6 EBR8 EBR10 EBR12

Spade

Stud Size 3.2mm 3.5mm 4mm 5mm 6mm

Part Number

EYR3 EYR4 EYR5 EYR6 EYR8 EYR10 EYR112

Stud Size 3mm 4mm 5mm 6mm 8mm 10mm 12mm

Spade

Stud Size 3.2mm 3.5mm 4mm 5mm 6mm

EBF3 EBF3N EBF4N EBF5 EBF6

Part Number

Part Number EYF3N EYF4N EYF5 EYF6

Stud Size 3.5mm 4mm 5mm 6mm

Butt Part Number ERB

Blade

Part Number ERBL10 ERBL18

Blade

Diameter x Length mm 2.3 x 10.4 2.3 x 18.4

Pin

Part Number ERP12

Part Number

Diameter x Length mm 2.8 x 9 2.3 x 18.4

EBBL9 EBBL18

Pin

Diameter x Length mm 1.9 x 12

EBP12

Part Number

EYBL10

Diameter x Length mm 2.8 x 10

Pin

Part Number

Durable low cost copper or brass connectors. Manufacturer as single piece connectors Electro tinned to protect from corrosion

26

Blade

Diameter x Length mm 1.9 x 12

Part Number

ERP14

Insulated with flared entry, colour coded vinyl sleeves All disconnect terminals supplied with anti-vibration copper sleeve.

Diameter x Length mm 2.9 x 14


Standard Industrial Terminals

Female Push-on

Female Push-on

Female Push-on

Part Number

Tab Size

Part Number

Tab Size

Part Number

Tab Size

ERPO 28 F5 ERPO 28 F8 ERPO 48 F5 ERPO 48 F8 ERPO 63 F

2.8 x 0.5 2.8 x 0.8 4.8 x 0.5 4.8 x 0.8 6.3 x 0.8

EBPO 48 F5 EBPO 48 F8 EBPO 63 F EBPO 85 F

4.8 x 0.5 4.8 x 0.8 6.3 x 0.8 8.5 x 0.8

EYPO 28 F5 EYPO 28 F8

6.3 x 0.8 9.5 x 1.1

Male Push-on

Male Push-on

Male Push-on

Part Number

Tab Size

Part Number

Tab Size

Part Number

Tab Size

ERPO 63M

6.3 x 0.8

EBPO 63M

6.3 x 0.8

EYPO 63M

6.3 x 0.8

Female Push-on Fully Insulated

Female Push-on Fully Insulated

Female Push-on Fully Insulated

Part Number

Tab Size

Part Number

Tab Size

Part Number

Tab Size

ERFPO 48 F5 ERFPO 48 F8 ERFPO 63 F

4.8 x 0.5 4.8 x 0.8 6.3 x 0.8

EBFPO 48 F5 EBFPO 48 F8 EBFPO 63 F

4.8 x 0.5 4.8 x 0.8 6.3 x 0.8

EYFPO 63F EYFPO 95F

6.3 x 0.8 9.5 x 1.1

Push-on Connector

Push-on Connector

Push-on Connector

Part Number

Tab Size

Part Number

Tab Size

Part Number

Tab Size

ERPOA 63

6.3 x 0.8

EBPOA 63

6.3 x 0.8

EYPOA 63

6.3 x 0.8

Female Bullet

Part Number

ERAB 4F

Female Bullet

Bullet Dia mm 4

Male Bullet

Part Number

ERAB 4M

Part Number

EBAB 4F EBAB 5F

Female Bullet

Bullet Dia mm 4 5

Male Bullet

Bullet Dia mm 4

Part Number

EBAB 4M EBAB 5M

Part Number

Bullet Dia mm

EYAB 5F

5

Male Bullet

Bullet Dia mm 4 5

Part Number

Bullet Dia mm

EYAB 5M

CALL +44(0)121 522 3040/520 7101

5 27


Copper Tube • HD Terminals • Tooling Copper Tube Terminals 1.5–240 Sq mm – Bell Entry

All Copper Tube Terminals have a radiused entry Cable Size sq mm

Stud Size mm dia ØA

Nominal Dimensions mm B

D

ØE

F

G

H

J

K

Part Number

10

4 5 6 8 10 12

4.5 4.5 4.5 4.5 4.5 4.5

12 12 12 12 12 12

8.7 8.7 12 12 19 19

4.2 5.2 6.2 8.4 10.5 13

1.42 1.42 1.3 1.03 1.8 1.8

4 4 5 6 10 12

5 5 6 9 10 12

24 24 26 30 35 39

3 3 3 3 3 3

DX 10-4 DX 10-5 DX 10-6 DX 10-8 DX 10-10 DX 10-12

16

5 6 8 10 12

5.5 5.5 5.5 5.5 5.5

15 15 15 15 15

11 11 11 19 19

5.2 6.5 8.4 10.3 13

1.4 1.4 1.31 1.8 1.8

4 5 6 10 12

9 9 9 10 12

32 33 34 39 43

4 4 4 4 4

DX 16-5 DX 16-6 DX 16-8 DX 16-10 DX 16-12

25

5 6 8 10 12

7 7 7 7 7

15 15 15 15 15

12.6 12.6 16 17.5 17.5

5.2 6.5 8.4 10.5 13

2 2 1.6 1.5 1.5

5 5 6 10 12

6 6 9 10 12

30 30 34 39 43

4 4 4 4 4

DX 25-5 DX 25-6 DX 25-8 DX 25-10 DX 25-12

35

6 8 10 12

8.6 8.6 8.6 8.6

18 18 18 18

15.7 15.7 16.2 18

6.4 8.4 10.5 13

2.2 2.2 2 1.8

8 8 9 9.2

8 8 11 10.8

39 39 43 43

5 5 5 5

DX 35-6 DX 35-8 DX 35-10 DX 35-12

50

6 8 10 12

9.6 9.6 9.6 9.6

23 23 23 23

17.4 17.4 17.4 17.2

6.4 8.4 10.5 13

2.4 2.4 2.4 2.4

8.5 8.5 10 12

8.5 8.5 10 13

46 46 49 54

6 6 6 6

DX 50-6 DX 50-8 DX 50-10 DX 50-12

SPECIFICATION REQUIREMENT a. b. c. d.

Finish Electro tinned Copper Conductivity to 97% IACS Copper tube double annealed All terminals up to 240mm2 will have bell mouth cable entrance e. Working temperature up to 180°C (Standard) f. Working temperature with nickel plating up to 350°C (Special)

28


Copper Tube • HD Terminals • Tooling

Note 1 Blank terminal palms are available from 10 sq mm to 240 sq mm. Note 2 When usinq flexible fine strand or welding cable it may be necessary to select the next larger terminal size, i.e. 70 sq mm fine strand, select 95 sq mm terminal.

Cable Size sq mm

Stud Size mm dia ØA

Nominal Dimensions mm B

D

ØE

F

G

H

J

K

Part Number

70

6 8 10 12 14 16

11.2 11.2 11.2 11.2 11.2 11.2

23 23 23 23 23 23

21.5 21.5 21.5 21.5 25 25

6.5 8.4 10.5 13 15 17

3 3 3 3 3 3

11 11 11 11 12.5 12.5

1 11 11 11 12.5 12.5

52 52 52 52 55 55

7 7 7 7 7 7

DX 70-6 DX 70-8 DX 70-10 DX 70-12 DX 70-14 DX 70-16

95

8 10 12 14 16

13.5 13.5 13.5 13.5 13.5

30 30 30 30 30

21.5 25 25 28 28

8.4 10.5 13 4.7 17

3.9 3.9 3.9 3.9 3.9

12 12 12 14 16

12 12 12 14 16

63 63 63 67 71

9 9 9 9 9

DX 95-8 DX 95-10 DX 95-12 DX 95-14 DX 95-16

120

8 10 12 14 16 20

15 15 15 15 15 15

25 25 25 25 25 25

27.5 27.5 27.5 27.5 27.5 27.5

8.4 10.5 13 15 17 21

3.9 3.9 3.9 3.9 3.9 3.9

12 12 12 15 15 20

12 12 12 15 15 20

59 59 59 65 65 75

10 10 10 10 10 10

DX 120-8 DX 120-10 DX 120-12 DX 120-14 DX 120-16 DX 120-20

150

8 10 12 14 16 20

16.5 16.5 16.5 16.5 16.5 16.5

26 26 26 26 26 26

30.2 30.2 30.2 30.2 30.2 30.2

8.4 10.5 13 15 17 21

4.38 4.38 4.38 4.38 4.38 4.38

14 14 14 14 16 20

14 14 14 14 16 20

65 65 65 65 73 77

11 11 11 11 11 11

DX 150-8 DX 150-10 DX 150-12 DX 150-14 DX 150-16 DX 150-20

185

10 12 14 16 20

19 19 19 19 19

28 28 28 28 28

34 34 34 34 34

10.5 13 15 17 21

4 4 4 4 4

14 14 14 16 18

14 14 14 16 18

68 68 68 72 76

12 12 12 12 12

DX 185-10 DX 185-12 DX 185-14 DX 185-16 DX 185-20

240

10 12 14 16 20

21 21 21 21 21

33 33 33 33 33

37.6 37.6 37.6 37.6 37.6

10.5 13 15 17 21

5 5 5 5 5

15 15 15 19 19

15 15 15 19 19

77 77 77 85 85

14 14 14 14 14

DX 240-10 DX 240-12 DX 240-14 DX 240-16 DX 240-20

CALL +44(0)121 522 3040/520 7101

29


Copper Tube • HD Terminals • Tooling Copper Tube Terminals 1.5–1000 Sq mm – Straight Entry

All Copper Tube Terminals have a radiused entry

Cable Size sq mm

Stud Size mm dia ØA

B

D

ØE

F

G

H

J

K

Part Number

1.5

3 4 5

1.8 1.8 1.8

5 5 5

8 8 8

3.2 4.2 5.2

1 1 1

4 4 4

5 5 5

16 16 16

2 2 2

D 1.5-3 D 1.5-4 D 1.5-5

2.5

3 4 5 6

2.4 2.4 2.4 2.4

7 7 7 7

8 8 10 10

3.2 4.2 5.2 6.5

1 1 0.8 0.8

4 4 5 5

5 5 6 6

18 18 20 20

2 2 2 2

D 2.5-3 D 2.5-4 D 2.5-5 D 2.5-6

4–6

4 5 6 8 10

3.8 3.8 3.8 3.8 3.8

9 9 9 9 9

10 10 12 12 17

4.2 5.2 6.5 8.4 10.5

1.2 1.2 1 1 1.7

5 5 6 6 11

6 6 9 9 11

23 23 27 27 34

3 3 3 3 3

D 6-4 D 6-5 D 6-6 D 6-8 D 6-10

10

5 6 8 10 12

4.5 4.5 4.5 4.5 4.5

9 9 9 9 9

12 12 12 19 19

5.2 6.5 8.4 10.5 13

1.2 1.2 1.2 1.8 1.8

6 6 6 10 12

7 7 9 10 12

25 25 27 32 37

3 3 3 3 4

D 10-5 D 10-6 D 10-8 D 10-10 D 10-12

16

5 6 8 10 12

5.4 5.4 5.4 5.4 5.4

12 12 12 12 12

12 12 12 19 19

5.2 6.5 8.4 10.5 13

1.4 1.4 1.4 1.8 1.8

7 7 7 10 12

7 7 9 10 12

30 30 32 36 40

4 4 4 4 4

D 16-5 D 16-6 D 16-8 D 16-10 D 16-12

25

6 8 10 12

6.8 6.8 6.8 6.8

12 12 12 12

13 16 16 16

6.5 8.4 10.5 13

2 1.6 1.6 1.6

7 10 10 12

7 11 11 11

30 37 37 39

4 4 4 4

D 25-6 D 25-8 D 25-10 D 25-12

35

6 8 10 12

8.2 8.2 8.2 8.2

15 15 15 15

15.3 15.3 18 18

6.5 8.4 10.5 13

2.4 2.4 2 2

9 9 10 10

9 9 11 11

38 38 38 38

5 5 5 5

D 35-6 D 35-8 D 35-10 D 35-12

50

6 8 10 12

9.5 9.5 9.5 9.5

16 16 16 16

18 18 18 18

6.5 8.4 10.5 13

2.9 2.9 2.9 2.9

10 10 10 10

11 11 11 11

43 43 43 43

6 6 6 6

D 50-6 D 50-8 D 50-10 D 50-12

70

6 8 10 12 14 16

11.2 11.2 11.2 11.2 11.2 11.2

18 18 18 18 18 18

21 21 21 21 28 28

6.5 8.4 10.5 13 15 17

3.5 3.5 3.5 3.5 2.2 2.2

12 12 12 12 16 16

13 13 13 13 16 16

50 50 50 50 57 57

7 7 7 7 7 7

D 70-6 D 70-8 D 70-10 D 70-12 D 70-14 D 70-16

30

Nominal Dimensions mm


Copper Tube • HD Terminals • Tooling

Note 1 Blank terminal palms are available from 10 sq mm to 1000 sq mm. Note 2 When usinq flexible fine strand or welding cable it may be necessary to select the next larger terminal size, i.e. 70 sq mm fine strand, select 95 sq mm terminal. Cable Size sq mm

Stud Size mm dia ØA

Nominal Dimensions mm B

D

ØE

F

G

H

J

K

Part Number

95

8 10 12 14 16

13.5 13.5 13.5 13.5 13.5

20 20 20 20 20

25 25 25 28 28

8.4 10.5 13 15 17

3.9 3.9 3.9 3.2 3.2

13 13 13 16 16

13 13 13 16 16

55 55 55 61 61

9 9 9 9 9

D 95-8 D 95-10 D 95-12 D 95-14 D 95-16

120

8 10 12 14 16

15 15 15 15 15

22 22 22 22 22

28 28 28 28 28

8.4 10.5 13 15 17

4.4 4.4 4.4 4.4 4.4

14 14 14 16 16

14 14 14 16 16

60 60 60 64 64

10 10 10 10 10

D 120-8 D 120-10 D 120-12 D 120-14 D 120-16

150

8 10 12 14 16 20

16.5 16.5 16.5 16.5 16.5 16.5

26 26 26 26 26 26

30 30 30 30 30.6 30.6

8.4 10.5 13 15 17 21

4.7 4.7 4.7 4.7 4.7 4.2

16 16 16 16 16 19

16 16 16 16 16 23

69 69 69 69 69 79

11 11 11 11 11 11

D 150-8 D 150-10 D 150-12 D 150-14 D 150-16 D 150-20

185

10 12 14 16 20

18.5 18.5 18.5 18.5 18.5

32 32 32 32 32

34 34 34 34 34

10.5 13 15 17 21

5 5 5 5 5

17 17 17 17 17

17 17 17 17 17

78 78 78 78 78

12 12 12 12 12

D 185-10 D 185-12 D 185-14 D 185-16 D 185-20

240

10 12 14 16 20

21 21 21 21 21

38 38 38 38 38

38 38 38 38 38

10.5 13 15 17 21

5.5 5.5 5.5 5.5 5.5

20 20 20 20 20

20 20 20 20 20

92 92 92 92 92

14 14 14 14 14

D 240-10 D 240-12 D 240-14 D 240-16 D 240-20

300

12 14 16 20

23.5 23.5 23.5 23.5

42 42 42 42

43 43 43 43.4

13 15 17 21

6.5 6.5 6.5 6.5

22 22 22 22

22 22 22 22

101 101 101 101

15 15 15 15

D 300-12 D 300-14 D 300-16 D 300-20

400

16 20

26.8 26.8

44 44

50.1 50.1

17 21

8 8

26 26

26 26

114 114

18 18

D400-16 D 400-20

500

16 20

30 30

48 48

56 56

17 21

9 9

28 28

28 28

124 124

20 20

D 500-16 D 500-20

630

16 20

35 35

56 56

65 65

17 21

10 10

33 33

33 33

144 144

22 22

D 630-16 D 630-20

800

-

39

78

73

-

11.6

-

-

170

17

D 800-B

1000

-

43

90

80.8

-

13.2

-

-

200

20

D 1000-B

CALL +44(0)121 522 3040/520 7101

31


Copper Tube • HD Terminals • Tooling

Butt Connectors Cable Size Sq mm

Dimensions mm A

B

J

1.5 2.5 4 to 6 10 16 25 35 50 70

1.8 2.4 3.8 4.5 5.4 6.8 8.2 9.5 11.2

6 7.5 7.5 10 10 16 18 20 20

12 15 15 20 20 32 36 40 40

Part Number

DBC1 DBC2 DBC5 DB10 DB16 DB25 DB35 DB50 DB70

Cable Size Sq mm

Dimensions mm

Part Number

A

B

J

95 120 150 185 240 300 400 500 630

13.5 15 16.5 18.5 21 23.5 26.8 30 35

22.5 22.5 27.5 32.5 40 42.5 45 50 55

45 45 55 65 80 85 90 100 110

DB95 DB120 DB150 DB185 DB240 DB300 DB400 DB500 DB630

Larger sizes are available to order

Parallel Connectors Cable Size Sq mm

Dimensions mm A

1.5 2.5 4 to 6 10 16 25

1.8 2.4 3.8 4.5 5.4 6.8

B

Part Number

J DPC1 DPC2 DPC5 DP10 DP16 DP25

7 7 7 9 10 11

Cable Size Sq mm

Dimensions mm A

35 50 70 95 120

8.2 9.5 11.2 13.5 15

B

Part Number

J DP35 DP50 DP70 DP95 DP120

12 16 18 20 23

Larger sizes are available to order

Solid Pin Connectors Cable Size Sq mm A

B

C

D

10 16 25 35 50 70

13 17 17 17 21 23

23 30 37 37 41 48

6.2 7.1 9.0 10.6 12.4 14.7

10 13 20 20 20 25

E

Part Number

Cable Size Sq mm A

B

C

D

E

Part Number

3.8 3.8 7.5 7.5 7.5 11.5

DSP10 DSP16 DSP25 DSP35 DSP50 DSP70

95 120 150 185 240 300

26 28 32 38 44 48

51 53 64 70 76 80

17.5 19.4 21.5 24.0 27.3 30.6

11.5 11.5 15.6 15.6 15.6 15.6

DSP95 DSP120 DSP150 DSP185 DSP240 DSP300

25 25 32 32 32 32

Transformer Terminals (Four Bolt Fixing)

32

Cable Size Sq mm

Stud Size

Dimensions mm D

L

M

J

N

P

Part Number

300 400 500 630

4 4 4 4

51 52 56 65

25.4 25.4 25.4 25.4

34.9 34.9 34.9 34.9

109 114 124 144

52 52 56 66

13.3 13.3 15.3 20.3

T300 T400 T500 T630

x x x x

8 8 8 8


Copper Tube • HD Terminals • Tooling

Insulation Black Nylon. Other colours can be manufactured to quantity orders. MANUFACTURED TO ORDER.

Nylon Insulated Copper Tube Terminals Cable Size Sq mm

Dimensions mm

Part Number

ØA

A1

B1

D

ØE

G

J

J1

10

4.5 4.5 4.5

8 8 8

11 11 11

12 12 18

6.5 8.4 10.5

6 6 9

38 40 44

22 22 22

DN 10-6 DN 10-8 DN 10-10

16

5.4 15.4 15.4

9 9 9

13 13 13

12 12 18

6.5 8.4 10.5

7 7 9

45 47 50

27 27 27

DN 16-6 DN 16-8 DN 16-10

25

6.8 6.8 6.8

11 11 11

13 13 13

13 16 16

6.5 8.4 10.5

7 10 10

46 53 53

28 28 28

DN 25-6 DN 25-8 DN 25-10

35

8.2 8.2 8.2

14 14 14

14 14 14

15.3 18 18

8.4 10.5 13

9 10 10

53 56 60

30 30 30

DN 35-8 DN 35-10 DN 35-12

50

9.5 9.5 9.5

16 16 16

16 16 16

16 16 16

8.4 10.5 13

10 10 10

63 63 67

36 36 36

DN 50-8 DN 50-10 DN 50-12

70

11.2 11.2 11.2

18 18 18

18 18 18

18 18 18

8.4 10.5 13

12 12 12

72 72 72

40 40 40

DN 70-8 DN 70-10 DN 70-12

95

13.5 13.5 13.5

20 20 20

20 20 20

20 20 20

8.4 10.5 13

13 13 13

79 79 79

44 44 44

DN 95-8 DN 95-10 DN 95-12

HD Nylon Insulated Pins Cable Size Sq mm

Dimensions mm

Part Number

A

A1

B1

D

E

G

J

J1

10 16 25 35 50

4.3 9 11 14 16

8 5.8 7.5 9 10.5

13 15 14 16 19

4.3 5.5 7 8 9

2.4 2.6 4 4 4

12 13 16 20 20

35 41 45 53 61

21 25 25 28 35

DNP10-12 DNP16-14 DNP25-16 DNP35-20 DNP50-20

HD Non Insulated Pins Cable Size Sq mm

Dimensions mm

Part Number

A

A1

B1

D

E

G

J

10 16 25 35 50 70

4.3 5.8 7.5 9 10.5 11

8 10 11 12 16 18

6.7 8.2 11.1 12.6 14.1 16

4.3 5.5 7 8 9 10

2.4 2.6 4 4 4 4.5

12 13 16 20 20 20

22 26 31 37 42 45

DP10-12 DP16-14 DP25-16 DP35-20 DP50-20 DP70-20

CALL +44(0)121 522 3040/520 7101

33


Copper Tube • HD Terminals • Tooling Manual Hand Compression Tooling DHC95

DHCR1516 DHC50H DHC120H DHC150H

DHCR1510 or DHCR0516

DHCRN2570

DHCR1516

DHCRN2570

Four jaw ratchet tool with controlled calibration suitable for crimping 1.5 to 16 sq mm Davico copper tube terminals.

Hand ratchet crimping tool for crimping un insulated or insulated Nylon / Vinyl tube oF sheet terminals.

DHCR1510 Ratchet controlled tool, designed to indent crimp sheet and tube terminals up to 10 sq mm. Range 1.5 to 10 sq mm.

DHCR0516 Ratchet controlled tool with four jaw apertures suitable for indent crimping from 0.5 to 16 sq mm on copper tube terminals. When using Davico U.K. terminals this tool will crimp 25 sq mm.

DHC95 Heavy duty indent crimping tool for tube and sheet terminals 10 to 95 sq mm with non ratchet screw adjustment.

36

Range Tube: Sheet: Tube: Sheet: Length: Weight:

Insulated 25 to 70 sq mm Insulated AWG6 to AWG1/0 Un-insulated 25 to 95 sq mm Un-insulated AWG4 to AWG2/0 409mm. 2.12Kg.

DHC50H,DH120H and DHC150H DHC50H for tubular cable lugs of 6 up to 50 sq mm. Length: 390mm, Weight: 1.1OKg DHC 120H for tubular cable lugs of 6 up to 120 sq mm. Length: 650mm, Weight: 2.90Kg DHC 150H for tubular cable lugs of 25 up to 150 sq mm.


Copper Tube • HD Terminals • Tooling

Hydraulic Compression Tooling

DHYCC400

DHY150

DHHCC400

DHHCH630

DHY240

DHY150

DHYCC400

Hydraulic compression tool with crimping force of 50Kn. The compact design incorporates hexagonal, indent and 'M' and 'W' indent crimping from 10 to 150 sq mm with two applications. Adjustable die ram.

Twin stage hydraulic hand compressor to crimp connectors up to 400 sq mm (hexagonal).

The tool is supplied complete with a steel carrying case.

The press head is rotatable by 180° to permit easy operation even in difficult conditions.

DHY240

The DHYCC400 is supplied in a stout steel case provided with a compartment to house 12 sets of dies.

As the DHY150 but with die sets to incorporate the compression crimping up to 240 sq mm.

This tool features a double speed action to save operator time and effort.

DHHCH630

Hexagon and indent form dies are available.

Hydraulic press head, complete with 3/8" NPT female quick coupler to crimp connectors up to 630 sq mm.

DHHCC400

To operate, this head must be fitted to a hydraulic pump, developing a pressure of 10,000 Ib/in2 (7OObar), such as the DHPN10. Hexagon and indent form dies are available.

Hydraulic press head, complete with 3/8" NPT female quick coupler to crimp connectors up to 400 sq mm (hexagonal). The DHHCC400 uses the same dies as the DHYCC400. To operate, this head must be fitted to a hydraulic pump, developing a pressure of 10,000 Ib/in2 1700bar), such as the DHPN10. CALL +44(0)121 522 3040/520 7101

37


Copper Tube • HD Terminals • Tooling HD Pump Units

DHFPC 2 DHPN 10

DHEPC 1

DHEPC 2

DHFPC 2

DHEPC 1

Two stage hydraulic foot pump developing a pressure of 10,000 Ib/in2 (7OO bar).

Electrically controlled pump unit with basic unit power supply of 220/240V complete with motor protection cut off for regulating working pressure Includes integral foot pedal and 2.5 metre hose. Pressure is adjustable from 450 to 700 bars. Power 0.9 Kw.

This pump is provided with 3 metres of high pressure flexible hose featuring a 3/8" NPT male quick coupler. Pressure release is effected by means of an easy action small pedal, situated on the back part of the pump. The DHFPC 2 is supplied in a stout steel case.

The unit can also be connected to a remote foot pedal if required.

DHPN 10

Also available at 11OV and 380V supplies.

Hydro pneumatic foot operated power source for use with Davico hydrautic crimpinq heads. Develops a pressure of 10,000 Ib/in2 (7OObar).

DHEPC 2

Hoses are available as additions.

Electrically controlled pump unit with 220/240V supply complete with motor protection, they are designed for intermittent duty and will start under full load conditions. All models have 3 metre remote control foot feature and a 2 gallon thermoplastic reservoir.

38


Cable Ties and Accessories

Miniature Range

Standard Range

LENGTH mm

LENGTH mm

80 100 120 160 200

WIDTH mm 2.5 2.5 2.5 25 2.5

MAX. DIA. MIN. STRENGTH PART NUMBER mm kg Natural Black 14 20 24 36 50

8.1 8.1 8.1 8.1 8.1

NT14M NT20M NT24M NT36M NT50M

NTB14M NTB20M NTB24M NTB36M NTB50M

Intermediate Range LENGTH mm 140 200 295 370

WIDTH mm 3.6 3.6 3.6 3.6

120 160 180 200 250 295 370 430

WIDTH mm 4.8 4.8 48 4.8 4.8 4.8 4.8 4.8

MAX. DIA. MIN. STRENGTH PART NUMBER mm kg Natural Black 24 36 40 50 70 75 100 115

22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2

NT24S NT36S NT40S NT50S NT70S NT75S NT100S NT115S

NTB24S NTB36S NTB40S NTB50S NTB70S NTB75S NTB100S NTB115S

MAX. DIA. MIN. STRENGTH PART NUMBER mm kg Natural Black 30 50 75 100

18.2 18.2 18.2 18.2

NT30I NT50I NT75I NT100I

NTB30I NTB50I NTB75I NTB100I

*In cases where page width does not allow ties to be shown to scale the dimension indicated should be added to give correct proportion.

NT/NTB 14M

NT/NTB 20M

NT/NTB 24M

NT/NTB 36M

NT/NTB 50M

Add 100mm*

NT/NTB 30I

NT/NTB 50I

NT/NTB 75I

Add 100mm*

NT/NTB 24S

42

NT/NTB 36S

NT/NTB 40S

NT/NTB 50S

NT/NTB 70S

NT/NTB 75S


Cable Ties and Accessories

Eurolok Cable Ties are produced on multi impression tools which mould complete one piece ties with no metal parts. They are manufactured from tough durable Nylon 6/6 which has been tested to underwriters laboratory UL94V2. The material is zero halogenated and also has a low smoke and fume capability when compared with materials such as PVC, PP, PE, ABS, POM, ECT. The classified oxygen index at max 28% dry is considered excellent in halogen free and L.S.F. situations, with the test method conducted in accordance with data sheet DAV1826 and the test status as indicated below in table A. The health and safety directives are substantiated on data sheet DAV1825 both of which are available upon application. In the case of Underwriters Laboratory specification requirements, the full implications of UL1565 have been applied as indicated against file No.E155866 and E157276. (Copies are available on application). These specifications include for the performance testing requirements with regard to Flammability, Tensile Strength, Vibration, Corrosion, etc., and in most cases exceed the recommendations. The ties can be tensioned by hand or by the use of applied tensioning tools. When using tensioning tools it is advisable to pre set the tooling to the proposed setting as detailed in Table 'B' Page 55. The colour shade of the standard ties is naturai nylon or black, but other colours are available to special order. Black cable ties are recommended for general outdoor use and have a highly durable resistance to Ultra Violet Light. Due to the variation in requirement for this type of application the cable ties can be manufactured from a higher performance Nylon 6/6 with intensive weather resistant qualities. All general specification details are incorporated as indicated in Table 'A' and for any additional information please contact our offices. Table A Test Method

Loop Tensile Strength (Kgs)

Material

Nylon 66

Miniature

8.1 Kgs

Working Temperature Range

-40°C to 85°C

Intermediate

18.2 Kgs

UL Flammability Rating

UI94

Standard

22.2 Kgs

Oxygen Index

25%–28%

Light Heavy

54.5 Kgs

Smoke Density

Flaming 35 Non Flaming 13

Heavy

79.4 Kgs

Extra Heavy

113.5 Kgs

Water Absorbtion (24 hours)

V2

1.3%

NT/NTB 100I

NT/NTB 100S

NT/NTB 115S

CALL +44(0)121 522 3040/520 7101

43


Cable Ties and Accessories

Light Heavy Range LENGTH mm 150 200 290 370

WIDTH mm

MAX. DIA. mm

MIN. STRENGTH kg

7.6 7.6 7.6 7.6

36 50 80 105

54.5 54.5 54.5 54.5

WIDTH mm

MAX. DIA. mm

MIN. STRENGTH kg

8.0 8.0 9.0 9.0

115 140 190 230

62 62 79.4 79.4

PART NUMBER Natural Black NT36LH NT50LH NT80LH NT105LH

NTB36LH NTB50LH NTB80LH NTB105LH

Heavy Range LENGTH mm 450 550 762 812

PART NUMBER Natural Black NT115H NT140H NT19OH NT230H

NTB115H NTB140H NTB19OH NTB230H

Add 50mm*

NT/NTB 36LH Add 200mm*

Add 500mm*

Add 300mm*

*In cases where page width does not allow ties to be shown to scale the dimension indicated should be added to give correct proportion.

44

NT/NTB 100XH Add 500mm*

NT/NTB 50LH


Cable Ties and Accessories

Extra Heavy Range LENGTH mm 230 280 380 450 550 762 880 1000

WIDTH mm

MAX. DIA. mm

MIN. STRENGTH kg

12.7 12.7 12.7 12.8 12.8 12.8 12.7 12.7

50 70 100 125 150 200 250 300

113.5 113.5 113.5 113.5 113.5 113.5 113.5 113.5

PART NUMBER Natural Black NT50XH NT70XH NT100XH NT115XH NT140XH NT190XH NT250XH NT300XH

NTB50XH NTB70XH NTB100XH NTB115XH NTB140XH NTB190XH NTB250XH NTB300XH

Extra Wide Ties The Eurolok range of heavy duty cable ties are designed for applications that require combined high strength fixing and a positive locking capability. They are particularly suitable in difficult situations frequently found in Petro Chemical or Marine Industries. They are available in two colours natural or black. See Table A (page 43) for full specification of nylon material.

NT/NTB 80LH

NT/NTB 105LH

NT/NTB 115H

NT/NTB 190H

NT/NTB 140H

NT/NTB 230H

NT/NTB 50XH

NT/NTB 115XH

NT/NTB 70XH

NT/NTB 140XH

NT/NTB 190XH

NT/NTB 250XH

NT/NTB 300XH

CALL +44(0)121 522 3040/520 7101

45


Cable Ties and Accessories

Releasable Range LENGTH mm 200 300 370

WIDTH mm

MAX. DIA. mm

MIN. STRENGTH kg

4.8 4.8 4.8

50 75 100

22.2 22.2 22.2

PART NUMBER Natural Black NT5ORE NT75RE NT100RE

NTB5ORE NTB75RE NTB1OORE

Standard Mounting Head Range LENGTH mm 205 370

WIDTH mm

MAX. DIA. mm

MIN. STRENGTH kg

4.2 4.8

50 100

22.2 22.2

PART NUMBER Natural Black NT50SFH NT1OOSFH

NTB50SFH NTB1OOSFH

Add 50mm*

Hole Size 6mm Dia.

Hole Size 6mm Dia. Add 100mm*

NT/NTB 50RE

NT/NTB 50SFH

NT/NTB 120LHFH

*In cases where page width does not allow ties to be shown to scale the dimension indicated should be added to give correct proportion. 46


Cable Ties and Accessories

Light Heavy Mounting Head Range LENGTH mm 400

WIDTH mm

MAX. DIA. mm

MIN. STRENGTH kg

7.9

120

58

WIDTH mm

MAX. DIA. mm

MIN. STRENGTH kg

3.5

40

18

PART NUMBER Natural Black NT12OLHFH

NTB12OLHFH

Push Mount Tie LENGTH mm 155

PART NUMBER Natural Black NT30IPM

NTB30IPM

Releasable cable ties, designed to facilitate routing changes and repairs. Press tab for easy removal. Mountable head cable ties used to secure bundled harnesses to panels. They may also be pre mounted to existing installations before final assembly. See ‘Table A’ for full specification of nylon material. See page 56 for explanation of Part Numbering System.

NT/NTB 75RE

NT/NTB 100RE

NT/NTB 100SFH

Pre drilled hole 3.5 dia

NT/NTB 30IPM

CALL +44(0)121 522 3040/520 7101

47


Cable Ties and Accessories

Miniature Marker Range LENGTH mm 100

WIDTH mm

MAX. DIA. mm

MIN. STRENGTH kg

PART NUMBER Natural

2.5

18

8.1

NT18MMT

Standard Marker Range LENGTH mm 200 270

WIDTH mm

MAX. DIA. mm

MIN. STRENGTH kg

PART NUMBER Natural

4.6 4.8

50 68

22 22

NT40SMT NT70SMT

NT 18MMT

*In cases where page width does not allow ties to be shown to scale the dimension indicated should be added to give correct proportion.

Add 50mm*

NTB 40LT

48


Cable Ties and Accessories

Nylon Lashing Tie Range LENGTH mm

WIDTH mm

MAX. DIA. mm

MIN. STRENGTH kg

PART NUMBER Natural

9 9 9 9 9

40 70 100 140 220

40 40 40 40 40

NTB40LT NTB70LT NTB100LT NTB140LT NTB220LT

180 265 360 500 750

Nylon 6.6. Data Working Temperature -40째C to +85째C Water Absorbtion

1.3%

Flammability Rating

UL 94 V2

NT 40SMT

NTB 70LT

NT 70SMT

NTB 100LT

NTB 140LT

NTB 220LT

CALL +44(0)121 522 3040/520 7101

49


Cable Ties and Accessories

1-Way Adhesive Bases DIMENSIONS mm A

B

C

F

H

MAX. CABLE TIE WIDTH mm

19 25

19 25

4.3 4.3

4 5

5 7

3.6 4.8

PART NUMBER Natural Black

NB1 NB2

NBB1 NBB2

2-Way Adhesive Bases DIMENSIONS mm A

B

C

F

H

MAX. CABLE TIE WIDTH mm

19 25

19 25

4.3 4.3

4 5

5 7

3.6 4.8

1-Way

50

2-Way

PART NUMBER Natural Black

NB12 NB22

NBB12 NBB22


Cable Ties and Accessories

Eurolok accessories are designed to incorporate the majority of features applicable to the positioning of cable ties. Self adhesive bases, cradles, eyelets, and clamps, are supplied and manufactured from A.B.S. or Nylon 6/6 material. In case of self adhesive components the adhesive pads themselves have a base synthetic rubber foundation which when applied gives a high permanent bond to most surfaces. On all applications a dual option of bolt fixings is designed into the base as a preference if required.

Cradles • They maintain the ties firmly in position increasing their resistance. • They are supplied with holes for fixing screws. MAX. CABLE TIE WIDTH mm

A

9

15

B

DIMENSIONS mm C

PART NUMBER Natural Black F

H

23

4.9

9

9

CTM2

CTMB2

Eyelets • The eyelet enables the cable tie to be secured from either direction. MAX. CABLE TIE WIDTH mm 4.8

Cradles

A

B

DIMENSIONS mm C

9.5

19.1

4.3

PART NUMBER Natural Black F

H

5

5

CTM 1

CTMB1

Eyelets

CALL +44(0)121 522 3040/520 7101

51


Cable Ties and Accessories

Cable Mounts • Designed for heavy duty harnessing applications. • Self adhesive. • Provides fast, strong mounting system for securing cables.

A

B

16 25 25

9.5 12.5 16

DIMENSIONS mm C 4.5 7.5 14.5

PART NUMBER Natural Black

D 4.5 11 18

NCC5 NCC11 NCC18

NCCB5 NCCB11 NCCB18

‘P’ CLIPS • For economical fixing of cables • Material: Nylon • Colour: Natural or Black

A 5.7x4.6 6.7x4.6 6.7x4.6 6.7x4.6 6.7x4.6 6.7x4.6

52

B 10.5 12.0 12.5 15.2 18.0 22.0

DIMENSIONS mm C D 9.5 10.0 12.0 12.0 12.0 12.0

4.8 6.0 9.0 12.0 19.1 25.4

E

F

19.8 22.0 24.0 31.0 35.0 43.0

1.3 1.0 1.0 1.0 1.0 1.0

PART NUMBER Natural Black PC19 PC22 PC24 PC31 PC35 PC43

PC19B PC22B PC24B PC31B PC35B PC43B


Cable Ties and Accessories

NYLON CABLE MARKINGS If cable identification is required the natural coloured nylon markers can be fitted to any 4.8 wide tie in a horizontal or vertical position.

A

DIMENSIONS mm B

C

40

20

1.3

A

PART NUMBER

NCM1

C

B

MASONRY MOUNT The MM9 masonry mount is used to secure cabie ties to a wall. Manufactured from Nylon, the maximum width of cable tie that can be used with the masonry mount is 9mm. Fix by drilling a 7mm diameter hole for use in soft materials wood, chipboard, plasterboard etc) and an 8mm diameter hole in hard materials (brick etc). Part No MM9

54

Max Tie Size

Length mm

9.5mm

42.6 mm


Cable Ties and Accessories

TENSIONING TOOLS DTG1 Standard Adjustable nylon tensioning tool for cable tie widths from 2.2 to 4.8mm.

DTGM1 Standard Adjustable metal tensioning tool for cable tie widths from 2.2 to 4.8mm.

DTGM1/HD Standard metal tensioning tool for cable tie widths from 4.8 to 13mm.

Table B TIE WIDTH RECOMMENDED GUN SETTINGS mm DTG 1 DTGM 1 DTGM 1/HD 2.5 3.6 4.8 7.6 90

2.5kg 6.0kg 14.0kg -

NO.0 NO.1 NO.3 -

To suit To suit

CALL +44(0)121 522 3040/520 7101

55


Cable Ties and Accessories

EXPLANATION OF EUROLOK PART NUMBERING SYSTEM Example: NT 50M NT

50

M

Nylon Tie

Maximum Bundle Diameter

Miniature

Example: NTB 50M NT

B

50

M

Nylon Tie

Black

Maximum Bundle Diameter

Miniature

FULL CODE LIST

M

Miniature

WIDTH 2.5

I

Intermediate

3.6 or 3.2

S

Standard

4.8, 4.6 or 4.2

LH

Light Heavy Duty

7.6

H

Heavy Duty

9.0

MPM

Miniature Push Mount Tie

2.5

XH

Extra Heavy Duty

12.7

RE

Releasable

4.8 and 12.7

FH

Fixing Head

4.8 and 7.6

LT

Lashing Tie

9

MMT

Miniature Marker Tie

2.5

SMT

Standard Marker Tie

4.8

Every Part Number should include one of the above codes to denote its width.

56


Electrical Accessories

STAINLESS STEEL ROLLER BALL CABLE TIE

TIE DIAGRAM SHOWN IS THAT OF A COATED STAINLESS STEEL ROLLER BALL CABLE TIE Minimum loop tensile strength 4.6 mm wide = 44 Kgs Minimum loop tensile strength 7.9 mm wide = 110 Kgs S = Standard LH = Light Heavy All dimensions are in mm

Dimension A Nominal Dimension B + -0.4mm Dimension C + -0.04mm

Dimension D Nominal Dimension E Nominal

Part Number Natural

Coated

A

B

C

D

E

Max. Dia.

SRBT20S SRBT24S SRBT30S SRBT50S SRBT1OOS SRBT115S SRBT175S SRBT225S SRBT300S SRBT350S SRBT400S SRBT50LH SRBT1OOLH SRBT115LH SRBT175LH SRBT225LH SRBT300LH SRBT350LH SRBT400LH

SRBTC20S SRBTC24S SRBTC30S SRBTC50S SRBTC1OOS SRBTC115S SRBTC175S SRBTC225S SRBTC300S SRBTC350S SRBTC400S SRBTC50LH SRBTC1OOLH SRBTC115LH SRBTC175LH SRBTC225LH SRBTC300LH SRBTC350LH SRBTC400LH

100 125 150 200 360 520 680 840 1000 1200 1400 200 360 520 680 840 1000 1200 1400

4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9

0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25

6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 10.3 1 0.3 10.3 1 0.3 10.3 1 0.3 10.3 10.3

4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4

20 24 35 50 100 150 200 250 300 370 430 50 100 150 200 250 300 370 430

CALL +44(0)121 522 3040/520 7101

65


Electrical Accessories STAINLESS STEEL LADDER CABLE TIES

Minimum loop tensile strength 7.0 mm wide = 32 Kgs Minimum loop tensile strength 12.0 mm wide = 50 Kgs S = Standard LH = Light Heavy XH = Extra Heavy

Dimension A Nominal Dimension B + -0.4mm Dimension C + -0.04mm

Dimension D Nominal Dimension E Nominal All dimensions are in mm

Part Number Natural

Coated

A

B

C

D

E

Max. Dia.

SLT36LH SLT50LH SLT60LH SLT70LH SLT80LH SLT105LH SLT115LH SLT140LH SLT150LH SLT200LH SLT300LH SLT36XH SLT50XH SLT60XH SLT70XH SLT105XH SLT115XH SLT140XH SLT150XH SLT200XH SLT30OXH

SLTC36LH SLTC50LH SLTC60LH SLTC70LH SLTC80LH SLTC105LH SLTC115LH SLTC 140LH SLTC150LH SLTC200LH SLTC300LH SLTC36XH SLTC50XH SLTC60XH SLTC70XH SLTC105XH SLTC115XH SLTC140XH SLTC150XH SLTC200XH SLTC300XH

150 200 225 250 300 360 450 600 610 750 1000 150 200 225 250 360 450 600 610 750 1000

7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 12.0 120 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0

0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.35 035 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35

8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0

3.2 3.2 3.2 32 32 3.2 3.2 3.2 3.2 32 32 3.8 3.8 38 38 3.8 3.8 3.8 38 38 3.8

45 60 70 75 95 110 140 190 190 235 315 45 60 70 75 110 140 190 190 235 315

66


Electrical Accessories

STAINLESS STEEL RELEASABLE CABLE TIE

S = STANDARD LH = LIGHT HEAW ALL DIMENSIONS ARE IN mm Part Number Coated SRTC36S SRTC60S SRTC75S SRTC115S SRTC36LH SRTC60LH SRTC75LH SRTC115LH

DIMENSION A NOMINAL DIMENSION B + - 0.4mm DIMENSION C + - 0.04mm

DIMENSION D NOMINAL DIMENSION E NOMINAL DIMENSION F NOMINAL

A

B

C

D

E

F

G

Max. Dia.

145 225 325 445 150 230 330 450

5.0 5.0 5.0 5.0 10.0 10.0 10.0 10.0

0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50

12.5 12.5 12.5 12.5 23.0 23.0 23.0 23.0

3.5 3.5 3.5 3.5 5.0 5.0 5.0 5.0

7.5 7.5 7.5 7.5 8.0 8.0 8.0 8.0

13.0 13.0 13.0 13.0 29.0 29.0 29.0 29.0

36 60 95 130 36 60 95 130

Technical Information A range of high tensile cable ties with exceptional resistance to both weathering and ageing. The ties have a high resistance to corrosion and chemical attack, with special durability against salt water and spray. The A.I.S.I. 316 stainless material can achieve very high working temperatures and these are as indicated in Table 1. In order to achieve even higher degrees of protection some of the ties can be coated with a matt heat resisting polysetser powder. From Table 1 you will notice that the coating does restrict the working temperature, but enhances durability, for specification and test of the coating see Table 2. The ties are supplied in three designs: 1. Roller Ball Type 2. Ladder Type 3. Releasable Stainless Steel cable ties can be used in many varied applications of extreme mechanical, chemical, radiation and temperature environments such as aircraft, power plants, mines, tunnels, oil and gas platforms.

TABLE 1 (TEMPERATURE RATING) TYPE DESCRIPTION COATED SRBT ROLLER BALL (NATURAL)

WORKING TEMPERATURE UNCOATED (NATURAL)

-

-80 DEG C to 540 DEG C

SLT LADDER (NATURAL)

-

-80 DEG C to 540 DEG C

SLTC LADDER (COATED)

-80 DEG C to 150 DEG C

SRTC RELEASEABLE (COATED

-80 DEG C to 150 DEG C

TABLE 2 (COATING) PROPERTIES MATERIAL THICKNESS

HT POLYESTER POWDER COAT 50 MICRONS

CHEMICAL AND DURABILITY TESTS Salt Spray ASIM B1117 AT 35 Deg C

Pass at 250 HRS. No Corrosion or Creep

Cyclic Humidity

Pass at 100 HRS. No Blistering or loss of gloss

Exterior durability

Excellent. Non chalking, slight loss of gloss after continous exposure but no breakdown or reduction in productive properties

Colour stability at elevated elevated temperature

Excellent for continuous temperatures up to 150 Deg C

Chemical resistance

Generally good to acids, alkalines and oils at normal temperature

CALL +44(0)121 522 3040/520 7101

67


Electrical Accessories DSTG1 – STAINLESS STEEL CABLE TIE GUN Specification Length: Weight: Stainless Steel Tie:

178 x 140 x 29 (mm) 560g Thickness up to 0.3mm Width up to 7.9mm

TENSION SETTING

TENSION APPLIED (Min) Kgs

1 31.5 2 47.0 3 58.7 4 65.0 FASTEN AND AUTOMATIC CUT MECHANISM Suitability For use on natural or coated stainless steel roller ball or ladder type cable ties. DSTG2 – Stainless Steel Cable Tie Gun

DSTG2 – STAINLESS STEEL CABLE TIE GUN Suitability For use on natural or coated stainless steel roller ball or ladder type cable ties. Application Method For Product DSTG2 A. Place the tie around the object to be secured. B. Insert the tail through the slot and into the ratchet jaw and tension by repeatedly pressing the tool handles together. C. After tensioning, move the tool with an up and down action and twist the tool in a clockwise direction. This will shear off the tail adjacent to the cable tie head.

68


Electrical Accessories CABLE MARKING SYSTEMS The Mark-On cable marking system is a real time and money saver. It consists of a handy dispenser with tear off mechanism filled with 10 rolls of self adhesive vinyl cloth tape. (one roll each 0–9). Rolls are 5mm wide and 2.4 metres long with approximately 500 markings. Temperature Range: 29°C to +93°C. Tape Colour: White Yellow available on request. Refills supplied in bags of 10 rolls. Range of products allows you to choose the exact combination of markers for your problem. Numbers: O–9

CABLE JOINTING KITS AND ACCESSORIES • • • • •

Snaplock Shell

Strong Transparent Shells are larger than normal to allow plenty of room for jointing. Easy Mix Twin Pack Quality Polyurethane Resin has a minimum two year shelf life. Have sufficient quantity of resin in the kits so extra bags to top up are not required. Kits are complete with earth continuity, safety gloves, step by step instructions. Mechanical connectors can be supplied for any combination of cable in kits so that the kit is complete and ready for customer to utilise. Technical staff are available at all times to answer your queries quickly and efficiently.

Larger Shell

70


Heatshrink Tubing and Accessories Mini Reel Packs Commercial Grade Polyolefin can be supplied on mini reels. It can be used to provide insulation for electrical connections, components and wiring. This tubing has a minimum shrink temperature of 120°C. Higher temperatures may be used without damaging the tubing, if rapid shrinking is required.

Type HST • • • •

Shrink Ratio 2:1 Operating Temperature Range -55°C to 135°C Shrink Temperature 100°C Suitable for general use on high quality equipment requiring military / UL approval

Display Stands

Single Packs

Ordering Data Type HST PART No.

HST 1.2 HST 1.6 HST 2.4 HST 3.2* HST 4.8* HST 6.4* HST 9.5* HST 12.7* HST 19.1* HST 25.4*

ORDERING SIZE

MINIMUM EXPANSION

MAXIMUM RECOVERED

NOMINAL RECOVERED WALL

ins

mm

ins

mm

ins

mm

ins

mm

3/64 1/16 3/32 1/8 3/16 1/4 3/8 1/2 3/4 1

1.2 1.6 2.4 3.2 4.8 6.4 9.5 12.7 19.1 25.4

0.046 0.063 0.093 0.125 0.187 0.250 0.375 0.500 0.750 1.000

1.2 1.6 2.4 3.2 4.8 6.4 9.5 12.7 19.0 25.4

0.023 0.031 0.046 0.062 0.093 0.125 0.187 0.250 0.375 0.500

0.6 0.8 1.2 1.6 2.4 3.2 4.8 6.4 9.5 12.7

0.018 0.018 0.019 0.019 0.019 0.026 0.026 0.026 0.029 0.035

0.45 0.45 0.50 0.50 0.50 0.65 0.65 0.65 0.75 0.90

Colour: Black, Red, Yellow, Blue, White, Green / Yellow, Grey, Brown Note: Green / Yellow only available in sizes marked*

TECHNICAL FEATURES Continuous Operating Temperature Range: Shrink Ratio: Flammability: Base Material: Shrink Temperature:

-55 to 135 °C 2:1 Self Extinguishing Polyolefin >120°C

TO COMPLIMENT THE HEATSHRINK TUBE PRODUCTS, DAVICO CAN SUPPLY A COMPLETE RANGE OF HEATSHRINK COMPRESSION TERMINALS AND TOOLING.

96


Davico catalogue lowsize  
Advertisement
Read more
Read more
Similar to
Popular now
Just for you