Page 1

Lofts

Module 02 - Task 01

1.1

1.2

1.3

{150, 125, 150} {150, 75, 150}

{150, 75, 150}

Key

1.4 {150, 100, 150}

{150, 50, 150}

{150, 150, 150} {150, 50, 150}

{0,0,0} {150, 125, 150}

Attractor / Control Points (X,Y,Z) Attractor / Control Curves Grid Points

{0,150,150} {0, 100, 150} {0, 75, 150} {0, 0, 25}

{150, 100, 0} {50, 150, 0}

{150, 0, 0}

{0, 50, 150}

{0,150,0}

{150, 25, 0}

{0, 125, 0} {0, 25, 0}

{0, 100, 0}

{50, 0, 0} {25, 0, 0}

{0, 0, 0}

{25, 0, 0}

Isabel Solin - 910959

Paneling Grid & Attractor Point

{Index Selection}

{Index Selection}

{Index Selection}

{Index Selection}

2.1

2.2

2.3

2.4

{23, 160, 90} {117, -5, 106}

{79, 73, 71} {117, 55, 3} {-47, 50, 78}

{-28, 46, -1}

Paneling

{Attractor Point Location}

{Attractor Point Location}

{Attractor Point Location}

{Index Selection}

3.1

3.2

3.3

3.4

Design Matrix 1:5

A slim opening at the top of the structure controls the amount of direct light entering the internal space. In natural sunlight this would limit the hours in the day any direct sunlight could enter to mostly midday.

The openings at the top are pointed downwards which blocks direct light from entering the interior space. This would create a dim and soft lighting effect within internally.

Solid panels create a tactile quality to the external surface generating interest.

Openings the panel near the base create windows connecting the exterior and interior spaces. These are angled slightly upwards towards a point attractor.

Movement through structure controlled and limited by narrow internal space

Exploded Axonometric 1:1 0

20

60mm


Module 02 - Task 02

Key {0,0,0}

Attractor / Control Points (X,Y,Z) Attractor / Control Curves

{75, 75, 75}

Isabel Solin - 910959 Design Matrix 1:5

Complex cuts occur when two geometries with different axis and rotation angles intersect each other.

Vast openings at the top of the volume allow light to wash through internal space.

Use of rotating rectangular prisms create triangular cuts instead of quadrilateral shapes.

Slit openings control light and entry points.

Geometry that does intersect with other geometry creates openings when boolean cut is made.

Axonometric 1:1 Solid boolean using 3.4 rotation to attractor point. 0

20

60mm

Geometry with just partial sections included in the boolean solid create shelf cuts that appear almost decorative.

dd mod a1s  
dd mod a1s  
Advertisement