Issuu on Google+

AUTOMOTIVE QUARTZ CRYSTALS & OSCILLATORS SELECTION TABLE Model

Package (mm)

Frequency Range Frequency Tolerance (Tightest*)

Frequency Stability (Tightest*)

Temperature Range (Widest*)

Load Capacitance (Standard)

Specifying Automotive Quartz Crystals & Oscillators

Page

250 Surface Mount Crystals

IQXC-180 AUTO

3.2 x 2.5

16 to 32MHz

±10ppm

±15ppm

–40 to 125°C

8pF

267

IQXC-201 AUTO

4 x 2.5

12 to 32MHz

±10ppm

±15ppm

–40 to 125°C

8pF

268

IQXC-104 AUTO

5 x 3.2

12 to 32MHz

±10ppm

±15ppm

–40 to 125°C

8pF

266

IQXC-228 AUTO

6 x 3.5

10 to 70MHz

±10ppm

±15ppm

-40 to 125°C

8pF

270

12SMX AUTO

7x5

6 to 80MHz

±10ppm

±15ppm

–40 to 125°C

8pF

254

85SMX AUTO

8 x 3.8

32.768kHz

±20ppm

–0.034/°C2

–40 to 85°C

12.5pF

256

IQXC-13 AUTO

8 x 4.5

6 to 80MHz

±10ppm

±15ppm

–40 to 125°C

8pF

264

11.3 x 4.7

3.01 to 100MHz

±10ppm

±15ppm

–40 to 125°C

16pF

262

HC49

1.8432 to 200MHz

±10ppm

±15ppm

–40 to 85°C

16pF

258

HC49/4H

3.01 to 100MHz

±10ppm

±15ppm

–40 to 125°C

16pF

260

Package (mm)

Frequency Range

Supply Voltage

Frequency Stability (Tightest*)

Temperature Range (Widest*)

Output

Page

IQXO-581 AUTO

5 x 3.2

1.5 to 160MHz

3.3V

±50ppm

–40 to 85°C

HCMOS

272

IQXO-580 AUTO

5 x 3.2

1.5 to 160MHz

5.0V

±50ppm

–40 to 85°C

HCMOS

272

HC49/4HSMX AUTO

Leaded Crystals HC49 AUTO HC49/4H AUTO

* Tighter tolerance, stability and wider temperautre ranges are available. Please contact our sales offices

249 www.iqdautomotive.com

AUTOMOTIVE

Surface Mount Oscillators Model


SPECIFYING AUTOMOTIVE QUARTZ CRYSTALs A range of products from our TS16949 approved automotive production site, all these parts are qualified to AEC-Q200 and are available with PPAP if required. A typical automotive quartz crystal specification reads like this: 10.0MHz HC49/4HSMX AUTO 50/50/–40 to 85C/20/ FUND TE The data in the example above is translated in the following order

▪▪ Frequency ▪▪ Model & Variant ▪▪ Frequency Tolerance @ 25°C ▪▪ Frequency Stability (over operating temperature range) ▪▪ Operating Temperature Range ▪▪ Load Capacitance ▪▪ Overtone ▪▪ Additional Text Code (for non-standard product)

AUTOMOTIVE

Frequency Frequency is normally specified in kilohertz (kHz) up to 999.999kHz and in megahertz (MHz) from 1.0MHz. All our computer-generated transaction documents follow this standard convention automatically. The frequency should be described to seven significant figures. If seven significant figures are not used, we assume that any figure that might follow those given may be taken as zero. Thus a frequency given as 16.6MHz will be taken as 16.60, not 16.66667. Some specifiers extend the use of kHz to all crystals operating in fundamental mode, reserving MHz for overtones. To minimise the possibility of misunderstanding it is best to use the standard method and specify fundamental or overtone mode separately. Please contact our sales offices for details of developed frequencies. Model Before manufacture of the crystal can start, the holder style must be defined. Each holder style covers a frequency range which is defined in the relevant specification. For leaded versions, the holder information should also cover any mechanical variant required such as a top wire or cropped leads. The following variants for example may be available, either singly or in some cases, in combination:

▪▪ 3 lead base ▪▪ Top wire ▪▪ Insulating sleeve ▪▪ Taped and reeled

▪▪ Fitted insulator ▪▪ Cropped leads ▪▪ Formed leads

Frequency Tolerance The cost of manufacture depends partly on the accuracy required at reference temperature (which in the case of the AT-cut crystal, is usually 25°C). Where high initial accuracy is important the additional manufacturing cost should be weighed against the cost of including a frequency trimming facility within the oscillator. www.iqdautomotive.com 250

Frequency Stability Frequency stability is normally specified as a frequency tolerance over a defined operating temperature range with respect to the frequency at reference temperature. The temperature ranges are defined for each crystal in the relevant data sheet. However the majority of crystals will continue to operate quite satisfactorily outside the temperature range for which they are specified, but with a possible degradation in the value of frequency stability. Under normal conditions this will not damage the crystal. A crystal designed for operation over a restricted operating temperature range, (such as from 0 to 50°C) generally has a better frequency stability over that range than one designed for operation over a wide operating temperature range. Therefore it is important not to over specify the temperature range, as doing so will result in inferior performance for the same or greater cost; or greater cost for the same or inferior performance. Generalised frequency vs temperature curves for the AT-cut crystal types are illustrated where appropriate. These indicate that, without compensation, a crystal specified for operation over a wide frequency range will probably have an inferior performance over a narrower range than one whose design was optimised for the narrower range. The angle of cut of the quartz blank from its quartz stone determines which curve will be followed; the chosen angle being subject to its own tolerance. Thus, since manufacturing cost is tolerance-dependent it is wise not to specify a wider operating temperature range than is actually needed unless some sacrifice of stability, or an increase in cost, can be accepted. Standard Frequency Tolerances and Stabilitie

▪▪ ±10ppm ▪▪ ±20ppm ▪▪ ±50ppm

▪▪ ±15ppm ▪▪ ±30ppm ▪▪ ±100ppm

Operating Temperature Ranges The standard operating temperature ranges for a crystal are:

▪▪ –40 to 85°C

▪▪ –55 to 125°C

Circuit condition The characters ‘SR’ are used to denote calibration of the crystal at series resonance. If it is to be calibrated at load resonance the characters represent the circuit load capacitance in pF. Additional Text Code If the product is non-standard, the letter ‘T’ and/or ‘E’ will appear at the end of the product specification. This refers to additional text on the quotation/sales order to identify the special requirements. Packaging Codes Tray packaging is available as an option for some products outlined in the individual data sheets. Unless individual data sheets state packaging, surface mount products will be Tape and Reel packed, and leaded products will be Bulk packed. Please note: only complete reels are sold.

▪▪ Bulk = Bulk packed

▪▪ Reel = Tape and Reel packed


Outline Drawings Dimensions on the crystal outline drawings are shown only as a guide. Precise dimensions of crystal holders are available from our Factory upon request. All dimensions are shown in mm and are nominal unless otherwise stated. Marking Where possible the frequency of operation will be marked in full on the crystal. On the smaller types the full frequency may not fit in the available space and will therefore be truncated. Please refer to the despatch packaging for the relevant crystal to see the frequency in full. Ordering Information

AUTOMOTIVE

â–Şâ–Ş See individual data sheets

251 www.iqdautomotive.com


SPECIFYING AUTOMOTIVE clock oscillators A typical surface mount automotive clock oscillator specification reads like this: 10.0MHz IQXO-580 HCMOS ±50ppm –40 to 85C 3.3V The data in the example above is translated in the following order

▪▪ Frequency ▪▪ Model ▪▪ Output ▪▪ Frequency Stability ▪▪ Operating Temperature Range ▪▪ Supply Voltage Frequency

AUTOMOTIVE

Frequency is normally specified in kilohertz (kHz) up to 999.999kHz and in megahertz (MHz) from 1.0MHz. All our computer-generated transaction documents follow this standard convention automatically. The clock oscillator frequency should be specified to seven significant figures. If seven significant figures are not used, we assume that any figure that might follow those given may be taken as zero. Thus a frequency given as 16.6MHz will be taken as 16.60, not 16.6666. Please contact our sales offices for details of developed frequencies. Model Number The model number incorporates information which describes output compatibility and holder style. Frequency Stability The frequency stability of a surface mount oscillator includes the initial adjustment tolerance at room temperature, the tolerance over operating temperature range and the effect of supply voltage variation. This value is specified as ‘parts per million’ (ppm) and is available in various ranges as shown below.

▪▪ ±50ppm ▪▪ ±100ppm Operating Temperature Range

▪▪ –40 to 85°C

Although in general clock oscillators will continue to operate outside their normal temperature range with a degradation in frequency stability, damage can result if the temperatures reached are excessive. Packaging Code Tape and Reel packaging is available as an option on many of the products outlined in this chapter. Unless individual data sheets state Tape and Reel packaging, items will be Bulk packed. Please note: only complete reels are sold.

▪▪ Bulk = Bulk packed ▪▪ Reel = Tape and Reel packed www.iqdautomotive.com 252

Additional Text Code If the product is non-standard, the letter ‘T’ and/or ‘E’ will appear at the end of the product specification. This refers to additional text on the quotation/sales order to identify the non-standard requirements. Outline Drawings Dimensions on the clock oscillators drawings are shown only as a guide. Precise dimensions of the clock oscillators holders are available upon request. All dimensions are shown in mm and are nominal unless otherwise stated. Marking Where space is limited some or all of the information will be omitted/truncated at IQD’s discretion. Full product description will be found on the individual batch packaging. Ordering Information

▪▪ See individual data sheets


AUTOMOTIVE

nOTES

253 www.iqdautomotive.com


12SMX AUTO Description

▪▪ Ceramic package with a hermetically seam sealed metal lid

Outline (mm) 12SMX AUTO - A

7.0±0.2

5.0±0.2

ISSUE 2; 1 November 2010 - RoHS 2002/95/EC

suitable for automotive applications. Qualified to AEC-Q200 and available with TS16949 release.

General Specifications

▪▪ Load Capacitance (CL): 8pF standard ▪▪ Drive Level: 50μW standard ▪▪ Ageing: ±5ppm max per year at 25°C ▪▪ Shunt Capacitance (C0): 7pF max ▪▪ ±10ppm to ±50ppm

4.5

▪▪ ±15ppm to ±100ppm ▪▪ –40 to 85°C ▪▪ –40 to 125°C

6.3

2.0

Standard Frequency Stabilities Operating Temperature Ranges

Solder Pad Layout

1.25

2.4

Standard Frequency Tolerances

1.2

2.2

Underside View Outline (mm) 12SMX AUTO- B

▪▪ –40 to 150°C

7.0±0.2

▪▪ Qualified to AEC-Q200

Packaging

▪▪ Loose in bulk pack, 100pcs per bag ▪▪ Tape and reel in accordance with EIA-481-D, 1kpcs per reel

1.2 max

(please see pages 372 & 373)

Example

▪▪ 10.00MHz 12SMX AUTO - B

50/100/–40 to 125C/8 FUND

www.iqdautomotive.com 254

Solder Pad Layout 5.8

2

4

3

1.2 Underside View

1.4

1

2.54

4.6

2.54

Ordering Information (*minimum required)

▪▪ Frequency* ▪▪ Model* ▪▪ Variant* ▪▪ Frequency Tolerance (@25°C)* ▪▪ Frequency Stability (over operating temperature range)* ▪▪ Operating Temperature Range* ▪▪ Load Capacitance* ▪▪ Overtone

Pad Connections 1. Crystal 2. GND 3. Crystal 4. GND

5.0±0.2

Environmental

1.0

AUTOMOTIVE

Storage Temperature Range

1.6


Electrical Specification - maximum limiting values Frequency Range

Frequency Tolerance @25°C ±2°C

Operating Temperature Range

6.0 to 8.0MHz

±10ppm to ±30ppm

–40 to 85°C

±20ppm to ±50ppm >8.0 to 9.0MHz

±10ppm to ±30ppm ±20ppm to ±50ppm

>9.0 to 11.0MHz

>11.0 to 40.0MHz

26.0 to 80.0MHz

Frequency Stability Available Over Operating Temperature Range Minimum

Maximum

±15ppm

±50ppm

–40 to 125°C

±50ppm

±100ppm

–40 to 85°C

±15ppm

±50ppm

–40 to 125°C

±50ppm

±100ppm

±10ppm to ±30ppm

–40 to 85°C

±15ppm

±50ppm

±20ppm to ±50ppm

–40 to 125°C

±50ppm

±100ppm

±10ppm to ±30ppm

–40 to 85°C

±15ppm

±50ppm

±20ppm to ±50ppm

–40 to 125°C

±50ppm

±100ppm

±10ppm to ±30ppm

–40 to 85°C

±15ppm

±50ppm

±20ppm to ±50ppm

–40 to 125°C

±50ppm

±100ppm

ESR Max

Vibration Mode

150Ω

Fundamental AT cut

100Ω

60Ω

40Ω

100Ω

3rd Overtone AT cut

AUTOMOTIVE

Note. For any other frequencies / specifications please contact our sales offices

255 www.iqdautomotive.com


85SMX AUTO ISSUE 2; 1 November 2010 - RoHS 2002/95/EC

Outline (mm) 85SMX AUTO

Description

▪▪ Plastic encapsulated surface mount crystal suitable for

4

3

General Specifications

1

2

Pad Connections 1. Crystal 2. N/C 3. N/C 4. Crystal

3.8 max

non safety-critical automotive applications. Qualified to AEC-Q200 and available with TS16949 release.

▪▪ ▪▪ Drive Level: 0.2μW max ▪▪ Ageing: ±5ppm max per year at 25°C ▪▪ Shunt Capacitance (C0): 2.5pF max

Load Capacitance (CL): 12.5pF standard

2.5 max

8.0 max 5.5

0.5

0.5

Standard Frequency Tolerance

0.9 Solder Pad Layout

▪▪ ±20ppm

Frequency Stability Coefficient

▪▪ –0.034ppm/°C2

(±0.006ppm/°C2)

1.3

Operable Temperature Range

▪▪ –40 to 85°C

1.3

Typical Frequency Stability Characteristics

Storage Temperature Range

Δf/fO (ppm)

▪▪ –40 to 105°C

Environmental

▪▪ Qualified to AEC-Q200

–50ppm

Packaging

▪▪ Loose in bulk pack, 100pcs per bag ▪▪ Tape and reel in accordance with EIA-481-D, 1kpcs per reel (please see pages 372 & 373)

Stability

AUTOMOTIVE

4.2

1.9 1.3 1.9

–100ppm Δf/fO = –0.034(T – TO)2 –150ppm

Ordering Information (*minimum required)

▪▪ Frequency* ▪▪ Model* ▪▪ Frequency Tolerance (@25°C)* ▪▪ Frequency Stability (over operating temperature range)* ▪▪ Operating Temperature Range* ▪▪ Load Capacitance*

–200ppm –50°C

–25°C

0°C

+25°C +50°C Temperature

+75°C –100°C

Example

▪▪ 32.768kHz 85SMX AUTO 20/-/-/12.5

Electrical Specification - maximum limiting values Frequency Range

Frequency Tolerance @25°C

Operating Temperature Range

Typical Frequency Stability Coefficient

ESR Max

Vibration Mode

32.768kHz

±20ppm

–40 to 85°C

-0.034ppm/°C2

50kΩ

Fundamental

www.iqdautomotive.com 256


AUTOMOTIVE

Notes

257 www.iqdautomotive.com


HC49 AUTO Outline (mm) Standard 2-Lead Device HC49 AUTO

iSSUE 2; 1 November 2010 - RoHS 2002/95/EC Description

▪▪ Resistance welded, hermetically sealed metal package

10.16 max 13.21 max

sealed in an inert atmosphere with glass to metal seals securing the lead wires and suitable for automotive applications. Qualified to AEC-Q200 and available with TS16949 release.

▪▪ Holders suffixed ‘-3L’ have a centre third wire which grounds General Specifications

13.2±0.5

the case.

Ø0.45±0.05

▪▪ Load Capacitance (CL): 16pF standard ▪▪ Drive Level: 50μW standard ▪▪ Ageing: ±5ppm max per year at 25°C ▪▪ Shunt Capacitance (C0): 7pF max

4.88±0.2 4.7 max 11.05 max

Standard Frequency Tolerances

▪▪ ±10ppm to ±30ppm

Standard Frequency Stabilities

Outline (mm) 3-Lead Device HC49 AUTO - 3L

▪▪ ±15ppm to ±50ppm

10.16 max 13.21 max

▪▪ –40 to 85°C

Storage Temperature Range

▪▪ –40 to 150°C

Environmental

▪▪ Qualified to AEC-Q200

Ø0.45±0.05

Packaging

4.88±0.2 = = 1 2 3

▪▪ Loose in bulk pack, 100pcs per bag ▪▪ Tape and reel to EIA-468-C, 1kpcs per reel (please see

4.7 max

pages 372 & 373)

11.05 max

Ordering Information (*minimum required)

▪▪ Frequency* ▪▪ Model* ▪▪ Variant* ▪▪ Frequency Tolerance (@25°C)* ▪▪ Frequency Stability (over operating temperature range)* ▪▪ Operating Temperature Range* ▪▪ Load Capacitance* ▪▪ Overtone*

Example

▪▪ 10.00MHz HC49 AUTO

10/50/–40 to 85C/16 FUND

www.iqdautomotive.com

Pin Connections 1. Crystal 2. Case & GND 3. Crystal

13.2±0.5

AUTOMOTIVE

Operating Temperature Range

258


Electrical Specification - maximum limiting values Frequency Range

Frequency Tolerance @25°C ±2°C

Operating Temperature Range

1.8432 to 3.0MHz

±10ppm to ±30ppm

–40 to 85°C

Frequency Stability Available Over Operating Temperature Range Minimum

Maximum

±15ppm

±50ppm

ESR Max

Vibration Mode

550Ω

Fundamental AT cut

>3.0 to 4.0MHz

150Ω

>4.0 to 6.0MHz

80Ω

>6.0 to 11.0MHz

50Ω

>11.0 to 50.0MHz

35Ω

20.0 to 100.0MHz

40Ω

3rd Overtone AT cut

60.0 to 120.0MHz

100Ω

5th Overtone AT cut

120.0 to 200.0MHz

150Ω

7th Overtone AT cut

AUTOMOTIVE

Note. For any other frequencies / specifications please contact our sales offices

259 www.iqdautomotive.com


HC49/4H AUTO iSSUE 2; 1 November 2010 - RoHS 2002/95/EC

Outline (mm) Standard 2-Lead Device HC49/4H AUTO

Description

10.16 max

▪▪ Resistance welded, hermetically sealed metal package

sealed in an inert atmosphere with glass to metal seals securing the lead wires and suitable for automotive applications. Qualified to AEC-Q200 and available with TS16949 release.

General Specifications

Ø0.45±0.05 4.88±0.2

▪▪ Load Capacitance (CL): 16pF standard ▪▪ Drive Level: 50μW standard ▪▪ Ageing: ±5ppm max per year at 25°C ▪▪ Shunt Capacitance (C0): 7pF max

Package Height HC49/4H = 4.0mm max HC49/3H = 3.0mm max

13.2±0.5

▪▪ Variant ‘-3L’ have a centre third wire which grounds the case. ▪▪ Variant ‘Gull-Wing’ have a metal jacket for surface mounting.

Height

4.7 max 11.05 max

Standard Frequency Tolerances

▪▪ ±10ppm to ±50ppm

Outline (mm) 3-Lead Device HC49/4H AUTO - 3L

10.16 max

▪▪ –40 to 85°C ▪▪ –40 to 125°C

4.88±0.2

▪▪ Qualified to AEC-Q200

1 2 3

Packaging

4.7 max

▪▪ Loose in bulk pack, 100pcs per bag ▪▪ Tape and reel in accordance with EIA-468-C, 1kpcs per reel

11.05 max Pin Connections 1. Crystal 2. Case & GND 3. Crystal

(please see pages 372 & 373)

Ordering Information (*minimum required)

Outline (mm) Gull-Wing Device HC49/4H AUTO - Gull-Wing

Solder Pad Layout 10.8 7.55

11.05 max 4.88±0.2 0.7±0.2

▪▪ Frequency* ▪▪ Model* ▪▪ Variant* ▪▪ Frequency Tolerance (@25°C)* ▪▪ Frequency Stability (over operating temperature range)* ▪▪ Operating Temperature Range* ▪▪ Load Capacitance* ▪▪ Overtone*

==

Example

2.52±0.3

www.iqdautomotive.com 260

5.08 max

0.2

▪▪

3.3

10.00MHz HC49/4H AUTO 50/100/–40 to 125C/16 FUND

9.8 max

1.5±0.2

4.0

Environmental

Package Height HC49/4H-3L = 4.0mm max HC49/3H-3L = 3.0mm max

13.2±0.5

▪▪ –40 to 150°C

Ø 0.45±0.05

3.0±0.1 10.0±0.2

Storage Temperature Range

Height

5.3 max 3.0±0.2

AUTOMOTIVE

Operating Temperature Ranges

2.4

▪▪ ±15ppm to ±100ppm

4.88

Standard Frequency Stabilities

3.2


Electrical Specification - maximum limiting values Frequency Range

Frequency Tolerance @25°C ±2°C

Operating Temperature Range

3.01 to 4.0MHz

±10ppm to ±30ppm

–40 to 85°C

±20ppm to ±50ppm >4.0 to 5.5MHz

±10ppm to ±30ppm ±20ppm to ±50ppm

>5.5 to 8.0MHz

>8.0 to 40.0MHz

26.0 to 100.0MHz

Frequency Stability Available Over Operating Temperature Range Minimum

Maximum

±15ppm

±50ppm

–40 to 125°C

±50ppm

±100ppm

–40 to 85°C

±15ppm

±50ppm

–40 to 125°C

±50ppm

±100ppm

±10ppm to ±30ppm

–40 to 85°C

±15ppm

±50ppm

±20ppm to ±50ppm

–40 to 125°C

±50ppm

±100ppm

±10ppm to ±30ppm

–40 to 85°C

±15ppm

±50ppm

±20ppm to ±50ppm

–40 to 125°C

±50ppm

±100ppm

±10ppm to ±30ppm

–40 to 85°C

±15ppm

±50ppm

±20ppm to ±50ppm

–40 to 125°C

±50ppm

±100ppm

ESR Max

Vibration Mode

300Ω

Fundamental AT cut

130Ω

80Ω

50Ω

100Ω

3rd Overtone AT cut

AUTOMOTIVE

Note. For any other frequencies / specifications please contact our sales offices

261 www.iqdautomotive.com


HC49/4HSMX AUTO iSSUE 2; 1 November 2010 - RoHS 2002/95/EC

Outline (mm)

Description

▪▪ Resistance welded, hermetically sealed metal package

sealed in an inert atmosphere with glass to metal seals securing the lead wires. The lead wires are formed into a gull wing and mounted on a plastic former and is suitable for automotive applications. Qualified to AEC-Q200 and available with TS16949 release.

General Specifications

▪▪ Load Capacitance (CL): 16pF standard ▪▪ Drive Level: 50μW standard ▪▪ Ageing: ±5ppm max per year at 25°C ▪▪ Shunt Capacitance (C0): 7pF max

Standard Frequency Tolerances

▪▪ ±10ppm to ±50ppm

Standard Frequency Stabilities

▪▪ ±15ppm to ±100ppm

AUTOMOTIVE

Operating Temperature Ranges

▪▪ –40 to 85°C ▪▪ –40 to 125°C

Storage Temperature Range

▪▪ –40 to 150°C

Environmental

▪▪ Qualified to AEC-Q200

Packaging

▪▪ Loose in bulk pack, 100pcs per bag ▪▪ Tape and reel in accordance with EIA-481-D, 1kpcs per reel (please see pages 372 & 373)

Ordering Information (*minimum required)

▪▪ Frequency* ▪▪ Model* ▪▪ Frequency Tolerance (@25°C)* ▪▪ Frequency Stability (over operating temperature range)* ▪▪ Operating Temperature Range* ▪▪ Load Capacitance* ▪▪ Overtone*

Example

▪▪ 10.00MHz HC49/4HSMX AUTO 50/100/–40 to 125C/16 FUND

www.iqdautomotive.com 262

11.3±0.2 3.81 max

10.16 max 4.1 max

0.6±0.1 13.1 max 4.5±0.5 0.8±0.2

Solder Pad Layout 15.0 4.7 max

Underside View

4.0

2.0


Electrical Specification - maximum limiting values Frequency Range

Frequency Tolerance @25°C ±2°C

Operating Temperature Range

3.01 to 4.0MHz

±10ppm to ±30ppm

–40 to 85°C

±20ppm to ±50ppm >4.0 to 5.5MHz

±10ppm to ±30ppm ±20ppm to ±50ppm

>5.5 to 8.0MHz

>8.0 to 40.0MHz

26.0 to 100.0MHz

Frequency Stability Available Over Operating Temperature Range Minimum

Maximum

±15ppm

±50ppm

–40 to 125°C

±50ppm

±100ppm

–40 to 85°C

±15ppm

±50ppm

–40 to 125°C

±50ppm

±100ppm

±10ppm to ±30ppm

–40 to 85°C

±15ppm

±50ppm

±20ppm to ±50ppm

–40 to 125°C

±50ppm

±100ppm

±10ppm to ±30ppm

–40 to 85°C

±15ppm

±50ppm

±20ppm to ±50ppm

–40 to 125°C

±50ppm

±100ppm

±10ppm to ±30ppm

–40 to 85°C

±15ppm

±50ppm

±20ppm to ±50ppm

–40 to 125°C

±50ppm

±100ppm

ESR Max

Vibration Mode

300Ω

Fundamental AT cut

130Ω

80Ω

60Ω

100Ω

3rd Overtone AT cut

AUTOMOTIVE

Note. For any other frequencies / specifications please contact our sales offices

263 www.iqdautomotive.com


IQXC-13 AUTO Outline (mm) IQXC-13 AUTO - A

Description

8.0±0.15

4.5±0.15

▪▪ Ceramic package with a hermetically seam sealed metal lid

suitable for automotive applications. Qualified to AEC-Q200 and available with TS16949 release.

General Specifications

▪▪ Load Capacitance (CL): 8pF standard ▪▪ Drive Level: 50μW standard ▪▪ Ageing: ±5ppm max per year at 25°C ▪▪ Shunt Capacitance (C0): 7pF max

1.5 max

Standard Frequency Tolerances

5.0

▪▪ ±10ppm to ±50ppm

Operating Temperature Ranges

▪▪ –40 to 85°C ▪▪ –40 to 125°C

AUTOMOTIVE

Storage Temperature Range

▪▪ –40 to 150°C

Environmental

▪▪ Qualified to AEC-Q200

Packaging

▪▪ Loose in bulk pack, 100pcs per bag ▪▪ Tape and reel in accordance with EIA-481-D, 1kpcs per reel (please see pages 372 & 373)

Ordering Information (*minimum required)

▪▪ Frequency* ▪▪ Model* ▪▪ Frequency Tolerance (@25°C)* ▪▪ Frequency Stability (over operating temperature range)* ▪▪ Operating Temperature Range* ▪▪ Load Capacitance* ▪▪ Overtone*

Example

▪▪ 10.00MHz IQXC-13 AUTO - A 50/50/–40 to 125C/8 FUND

www.iqdautomotive.com 264

2.0

▪▪ ±15ppm to ±100ppm

6.5

1.4

Standard Frequency Stabilities

Solder Pad Layout

1.5

Underside View

2.4

ISSUE 2; 1 November 2010 - RoHS 2002/95/EC

1.8


Electrical Specification - maximum limiting values Frequency Range

Frequency Tolerance @25°C ±2°C

Operating Temperature Range

6.0 to 11.0MHz

±10ppm to ±30ppm

–40 to 85°C

±20ppm to ±50ppm >11.0 to 14.0MHz

±10ppm to ±30ppm ±20ppm to ±50ppm

>14.0 to 20.0MHz

>20.0 to 48.0MHz

30.0 to 80.0MHz

Frequency Stability Available Over Operating Temperature Range Minimum

Maximum

±15ppm

±50ppm

–40 to 125°C

±50ppm

±100ppm

–40 to 85°C

±15ppm

±50ppm

–40 to 125°C

±50ppm

±100ppm

±10ppm to ±30ppm

–40 to 85°C

±15ppm

±50ppm

±20ppm to ±50ppm

–40 to 125°C

±50ppm

±100ppm

±10ppm to ±30ppm

–40 to 85°C

±15ppm

±50ppm

±20ppm to ±50ppm

–40 to 125°C

±50ppm

±100ppm

±10ppm to ±30ppm

–40 to 85°C

±15ppm

±50ppm

±20ppm to ±50ppm

–40 to 125°C

±50ppm

±100ppm

ESR Max

Vibration Mode

300Ω

Fundamental AT cut

100Ω

70Ω

50Ω

150Ω

3rd Overtone AT cut

AUTOMOTIVE

Note. For any other frequencies / specifications please contact our sales offices

265 www.iqdautomotive.com


IQXC-104 AUTO iSSUE 3; 1 November 2010 - RoHS 2002/95/EC Description

▪▪ Hermetically sealed ceramic package with a seam sealed

Outline (mm) IQXC-104 AUTO - A

5.0±0.15 3.2±0.15

metal lid suitable for automotive applications. Qualified to AEC-Q200 and available with TS16949 release.

General Specifications

1.0 max

▪▪ Load Capacitance (CL): 8pF standard ▪▪ Drive Level: 50μW standard ▪▪ Ageing: ±5ppm max per year at 25°C ▪▪ Shunt Capacitance (C0): 7pF max

Standard Frequency Tolerances

2.0

▪▪ ±10ppm to ±50ppm

Solder Pad Layout 3.5

1.5

▪▪ ±15ppm to ±100ppm

Operating Temperature Ranges

1.9

Underside View

▪▪ –40 to 85°C ▪▪ –40 to 125°C

Outline (mm) IQXC-104 AUTO - B

5.0±0.15

Storage Temperature Range

3.2±0.15

▪▪ –40 to 150°C

Pad Connections 1. Crystal 2. GND & Lid 3. Crystal 4. GND & Lid

Environmental

▪▪ Qualified to AEC-Q200

1.0 max

Packaging

▪▪ Loose in bulk pack, 100pcs per bag ▪▪ Tape and reel in accordance with EIA-481-D, 1kpcs per reel (please see pages 372 & 373)

Solder Pad Layout 3.3

1

2

4

3

2.0

▪▪ Frequency* ▪▪ Model* ▪▪ Variant* ▪▪ Frequency Tolerance (@25°C)* ▪▪ Frequency Stability (over operating temperature range)* ▪▪ Operating Temperature Range* ▪▪ Load Capacitance* ▪▪ Overtone

1.3

2.4

1.3

Ordering Information (*minimum required)

1.4

AUTOMOTIVE

2.4

2.0

Standard Frequency Stabilities

1.6

Underside View

Example

▪▪ 20.00MHz IQXC-104 AUTO - B 50/50/–40 to 125C/8 FUND

Electrical Specification - maximum limiting values Frequency Range

Frequency Tolerance @25°C ±2°C

Operating Temperature Range

Frequency Stability Available Over Operating Temperature Range

12.0 to <20.0MHz

±10ppm to ±30ppm

–40 to 85°C

±15ppm

±50ppm

±20ppm to ±50ppm

–40 to 125°C

±50ppm

±100ppm

Minimum

20.0 to 32.0MHz

±10ppm to ±30ppm

–40 to 85°C

±15ppm

±50ppm

–40 to 125°C

±50ppm

±100ppm

www.iqdautomotive.com 266

Vibration Mode

150Ω

Fundamental AT cut

Maximum

±20ppm to ±50ppm

Note. For any other frequencies / specifications please contact our sales offices

ESR Max

100Ω


IQXC-180 AUTO iSSUE 2; 1 November 2010 - RoHS 2002/95/EC

Outline (mm) IQXC-180 AUTO - B

Description

3.4 max

▪▪ Ceramic package with a hermetically seam sealed metal lid

Pad Connections 1. Crystal 2. GND 3. Crystal 4. GND

2.7 max

suitable for automotive applications. Qualified to AEC-Q200 and available with TS16949 release.

General Specifications

0.8 max

▪▪ Load Capacitance (CL): 8pF standard ▪▪ Drive Level: 50µW standard ▪▪ Ageing: ±5ppm max per year @ 25°C ▪▪ Shunt Capacitance (C0): 7pF max

Solder Pad Layout 1.0 0.9 0.7 0.9

1 2

Standard Frequency Stabilities

▪▪ ±15ppm to ±100ppm

4

Operating Temperature Ranges

1.4

3

1.15

▪▪ ±10ppm to ±50ppm

1.2

1.6

1.0

Standard Frequency Tolerances

2.2

Underside View

▪▪ –40 to 85°C ▪▪ –40 to 125°C

Storage Temperature Range AUTOMOTIVE

▪▪ –40 to 150°C

Environmental

▪▪ Qualified to AEC-Q200

Packaging

▪▪ Loose in bulk pack, 100pcs per bag ▪▪ Tape and reel in accordance with EIA-481-D, 1kpcs per reel (please see pages 372 & 373)

Ordering Information (*minimum required)

▪▪ Frequency* ▪▪ Model* ▪▪ Frequency Tolerance (@25°C)* ▪▪ Frequency Stability (over operating temperature range)* ▪▪ Operating Temperature Range* ▪▪ Load Capacitance* ▪▪ Overtone

Example

▪▪ 20.00MHz IQXC-180 AUTO - B 50/50/–40 to 125C/8 FUND

Electrical Specifications – maximum limiting values Frequency Range

Frequency Tolerance @25°C ±2°C

Operating Temperature Range

Frequency Stability Available Over Operating Temperature Range

16.0 to 26.0MHz

±10ppm to ±30ppm

–40 to 85°C

±15ppm

±50ppm

±20ppm to ±50ppm

–40 to 125°C

±50ppm

±100ppm

Minimum

>26.0 to 32.0MHz

ESR Max

Vibration Mode

100Ω

Fundamental AT Cut

Maximum

±10ppm to ±30ppm

–40 to 85°C

±15ppm

±50ppm

±20ppm to ±50ppm

–40 to 125°C

±50ppm

±100ppm

50Ω

Note. For any other frequencies / specification combinations, please contact our sales offices

267 www.iqdautomotive.com


IQXC-201 AUTO Outline (mm) IQXC-201 AUTO - B

iSSUE 2; 1 November 2010 - RoHS 2002/95/EC Description

4.0±0.1

▪▪ Ceramic package with a hermetically seam sealed metal lid

2.5±0.1

suitable for automotive aplications. Qualified to AEC-Q200 and available with TS16949 release.

General Specifications

1.0 max

▪▪ Load Capacitance (CL): 8pF standard ▪▪ Drive Level: 50µW standard ▪▪ Ageing: ±5ppm max per year at 25°C ▪▪ Shunt Capacitance (C0): 5pF max

Pad Connections 1. Crystal 2. GND 3. Crystal 4. GND

Solder Pad Layout

2

4

3

1.6

▪▪ ±15ppm to ±100ppm

1

1.15

Standard Frequency Stabilities

3.0

1.0

2.0

▪▪ ±10ppm to ±50ppm

0.7

Standard Frequency Tolerances

1.4

Underside View

Operating Temperature Ranges

▪▪ –40 to 85°C ▪▪ –40 to 125°C

AUTOMOTIVE

Storage Temperature Range

▪▪ –40 to 150°C

Environmental

▪▪ Qualified to AEC-Q200

Packaging

▪▪ Loose in bulk pack, 100pcs per bag ▪▪ Tape and reel in accordance with EIA-481-D, 1kpcs per reel (please see pages 372 & 373)

Ordering Information (*minimum required)

▪▪ Frequency* ▪▪ Model* ▪▪ Frequency Tolerance (@25°C)* ▪▪ Frequency Stability (over operating temperature range)* ▪▪ Operating Temperature Range* ▪▪ Load Capacitance* ▪▪ Overtone

Example

▪▪ 20.00MHz IQXC-201 AUTO - B 50/50/–40 to 125C/8 FUND

Electrical Specifications – maximum limiting values Frequency Range

Frequency Tolerance @25°C ±2°C

Operating Temperature Range

Frequency Stability Available Over Operating Temperature Range

12.0 to 20.0MHz

±10ppm to ±30ppm

–40 to 85°C

±15ppm

±50ppm

±20ppm to ±50ppm

–40 to 125°C

±50ppm

±100ppm

Minimum

>20.0 to 32.0MHz

±10ppm to ±30ppm

–40 to 85°C

±15ppm

±50ppm

–40 to 125°C

±50ppm

±100ppm

www.iqdautomotive.com

268

Vibration Mode

80Ω

Fundamental AT Cut

Maximum

±20ppm to ±50ppm

Note. For any other frequencies / specification combinations, please contact our sales offices

ESR Max

50Ω


AUTOMOTIVE

notes

269 www.iqdautomotive.com


IQXC-228 AUTO Outline (mm) IQXC-228 AUTO - A

Description

6.0±0.15

▪▪ Ceramic package with a hermetically seam sealed metal lid

3.5±0.15

suitable for automotive applications. Qualified to AEC-Q200 and available with TS16949 release.

General Specifications

1.2 max

▪▪ Load Capacitance (CL): 8pF standard ▪▪ Drive Level: 50μW standard ▪▪ Ageing: ±5ppm max per year at 25°C ▪▪ Shunt Capacitance (C0): 7pF max

Standard Frequency Tolerances

▪▪ ±15ppm to ±100ppm

1.8

Underside View

Operating Temperature Ranges

Outline (mm) IQXC-228 AUTO - B

6.0±0.1

Storage Temperature Range

Pad Connections 1. Crystal 2. GND 3. Crystal 4. GND

3.5±0.1

▪▪ –40 to 150°C

Environmental

1.2 max

▪▪ Qualified to AEC-Q200

Packaging

▪▪ Loose in bulk pack, 100pcs per bag ▪▪ Tape and reel in accordance with EIA-481-D, 1kpcs per reel (please see pages 372 & 373)

Solder Pad Layout

Example

▪▪ 10.00MHz IQXC-228 AUTO - B 50/100/–40 to 125C/8 FUND

www.iqdautomotive.com 270

4.4

2

4

3

Underside View

2.4

1

1.3

▪▪ Frequency* ▪▪ Model* ▪▪ Variant* ���▪ Frequency Tolerance (@25°C)* ▪▪ Frequency Stability (over operating temperature range)* ▪▪ Operating Temperature Range* ▪▪ Load Capacitance* ▪▪ Overtone

1.4

3.0

1.5

Ordering Information (*minimum required)

0.9

AUTOMOTIVE

4.4 2.0

Standard Frequency Stabilities

▪▪ –40 to 85°C ▪▪ –40 to 125°C

Solder Pad Layout

1.4

3.0

▪▪ ±10ppm to ±50ppm

2.4

iSSUE 2; 1 November 2010 - RoHS 2002/95/EC

1.8


Electrical Specification - maximum limiting values Frequency Range

Frequency Tolerance @25°C ±2°C

Operating Temperature Range

10.0 to 11.0MHz

±10ppm to ±30ppm

–40 to 85°C

±20ppm to ±50ppm >11.0 to 12.0MHz

±10ppm to ±30ppm ±20ppm to ±50ppm

>12.0 to 40.0MHz

40.0 to 70.0MHz

Frequency Stability Available Over Operating Temperature Range Minimum

Maximum

±15ppm

±50ppm

–40 to 125°C

±50ppm

±100ppm

–40 to 85°C

±15ppm

±50ppm

–40 to 125°C

±50ppm

±100ppm

±10ppm to ±30ppm

–40 to 85°C

±15ppm

±50ppm

±20ppm to ±50ppm

–40 to 125°C

±50ppm

±100ppm

±10ppm to ±30ppm

–40 to 85°C

±15ppm

±50ppm

±20ppm to ±50ppm

–40 to 125°C

±50ppm

±100ppm

ESR Max

Vibration Mode

80Ω

Fundamental AT cut

50Ω

40Ω

70Ω

3rd Overtone AT cut

AUTOMOTIVE

Note. For any other frequencies / specifications please contact our sales offices

271 www.iqdautomotive.com


IQXO-580, -581 AUTO ISSUE 0.2; 1 November 2010 - RoHS 2002/95/EC

Outline (mm) IQXO-580, -581 AUTO

Description

5.0±0.2 4

3

1

2

Pad Connections 1. Tri-State 2. GND 3. Output 4. +VS

3.2±0.2

3.3V or 5V surface mount oscillators in a ceramic package, with a hermetically sealed metal lid suitable for automotive applications. Qualified to AEC-Q200 and available with TS16949 release. Package Outline

1.05±0.15

▪▪ 5 x 3.2mm

Frequency Range

▪▪ 1.5 to 160MHz

Solder Pad Layout

Output Compatibility & Load

2.54

2.54

50pF max

>50.0MHz to 80.0MHz

30pF max

>80.0MHz to 160.0MHz

15pF max

2.2

4 3

1.4

Maximum Compatibility Load 1.5 to 50.0MHz

1 2

1.2±0.1

▪▪ Tri-state HCMOS ▪▪ Drive Capability

1.2±0.1

1.6

Underside View

Output Waveform

AUTOMOTIVE

Supply Voltages

▪▪ 5.0V IQXO-580 AUTO ▪▪ 3.3V IQXO-581 AUTO

Frequency Stabilities

▪▪ ±50ppm, ±100ppm (inclusive of supply voltage and output load variations over the operating temperature range)

Operating Temperature Range

▪▪ –40 to 85°C

Storage Temperature Range

tf 90%VS 50%VS

10%VS

▪▪ –55 to 125°C

Tri-state Operation

▪▪ Logic ‘1’ to pad 1 enables oscillator output ▪▪ Logic ‘0’ to pad 1 disables oscillator output; when disabled the oscillator output goes to the high impedance state

▪▪ No connection to pad 1 enables oscillator output Ageing

▪▪ ±5ppm max per year

Environmental

▪▪ Qualified to AEC-Q200

Packaging

▪▪ Loose in bulk pack, 100pcs per bag ▪▪ Tape and reel in accordance with EIA-481-D, 1kpcs per reel (please see pages 372 & 373)

www.iqdautomotive.com 272

tr

t Duty cycle = t x 100(%) T

T

Ordering Information (*minimum required)

▪▪ Frequency* ▪▪ Model* ▪▪ Output Compatability ▪▪ Frequency Stability (over operating temperature range)* ▪▪ Operating Temperature Range* ▪▪ Supply Voltage

Example

▪▪ 10.00MHz IQXO-580 AUTO

HCMOS ±100ppm –40 to 85C 5.0V


Electrical Specification - maximum limiting values Frequency Range 1.5 to 70.0MHz

Frequency Stability Supply Voltage Supply Current Rise Time (tr) (10-90%) ±50ppm ±100ppm

>70.0MHz to 160.0MHz

5.0V±10%

30mA

3.3V±10% 5.0V±10%

12ns

Fall Time (tf) (90-10%)

Duty Cycle

Model Number

12ns

40/60%

IQXO-580 AUTO IQXO-581 AUTO

50mA

3.3V±10%

IQXO-580 AUTO IQXO-581 AUTO

Note. For any other frequencies / specifications please contact our sales offices Test Circuit

Frequency Counter

+VS

Oscillator 3 4 2 1

Power Supply V

0.1µF

Oscilloscope 15pF*

* Inclusive of jigging and equipment capacitance

273 www.iqdautomotive.com

AUTOMOTIVE

+VS

A


AUTOMOTIVE

NOTES

www.iqdautomotive.com 274


IQD Frequency Products Ltd