IRRIGATION SYSTEMS AND PIVOTS
LINEAL AND CIRCULAR
The pivot single, or simple pivot, is a panel for simple but effective management of lineal or circular pivots. In both cases the supply is three-phase at 400V and a consumption of up to 25A has been foreseen.
CHARACTERISTICS Safety voltage of 110V Advance and reverse limit switch, normally open Voltage of cart motors: 400 Vac Function order to last tower in 110V with adjustable advance/rest cycle Panel supply: 3 phases WITHOUT neutral: 400 Vac Barrel valve output at 110V, with limit switches for irrigation interruption in the limits of the trajectory AUTO-REVERSE function Movement selector with water or in dry Stopping times in start position, start irrigation and end of irrigation trajectory are all configurable Slippage safety input
OPTIONAL: • Manoeuvre input at 12Vcc from battery to diesel generator and starter from the same by potential-free contact. CONSULT In the case of the lineal pivot as well as the rotation inverter there is an output for the movement of the cart. The auto-reverse function should be order as an option in the lineal pivot.
CODE PIVOT S-L/C _ PIVOT SINGLE PANEL: LINEAL AND CIRCULAR REFERENCE
PIVOT S - L
230 / 400 V
PIVOT S - C
LINEAL AND CIRCULAR
With the same function philosophy as the PIVOT-S on the previous page, the PIVOTPRM incorporates new functions like 2 outputs for cantilever valves, safety system cancelling with a timer, programming of end of trajectory and irrigation in cantilevers via the positioning of an analogue potentiometer and the possibility of remote control and remote alarms via mobile telephone.
CHARACTERISTICS Safety voltage of 110V Advance and reverse limit switch, normally open and unique Voltage of cart motors: 400 Vac Function order to last tower in 110V with adjustable advance/rest cycle Panel supply: 3 phases WITHOUT neutral: 400 Vac Barrel valve output at 110V, and another 2 valves for cantilevers for irrigation interruption in programmed areas according to the position of the pivot AUTO-REVERSE function. (only circular) Movement in a programmable angle between 0 and 360 degrees, Possibility of programming a minimum and maximum angle Option Movement selector with water or in dry Slippage safety input
• Manoeuvre input at 12Vcc from battery to diesel generator and starter from the same by potential-free contact. CONSULT
In the case of ordering the remote control option (GSM), the PIN number can be modified from the display, to be able to change the card when you want and the telephone number to which the alarm notifications are sent. Therefore the panel can be in stock without it having to know which customer it is for and which card is going to be used.
• Notification via SMS of water pressure fault • Control via SMS of: . Start-up . Percentage of cycle advance/rest . Activation/deactivation of the auto-reverse function . Change of advance in dry to watering and vice-versa
CODE PIVOT PRM-L/C _ PIVOT PREMIUM PANEL: LINEAL AND CIRCULAR REFERENCE
PIVOT PRM - L
PIVOT PRM - C
PIVOT PRM - C - GSM
230 / 400 V
PIVOT PRM - L - GSM
TECHNOLOGY AND SAVING ON YOUR IRRIGATION SYSTEM CARACTERÍSTICAS
.ADVANCE PIVOT CONTROL BOTH IN LINEAL AND IN CIRCULAR . EASY OPERATION . REMOTE CONTROL SYSTEMS AND ALARMS VIA GSM . PERSONALISATION AND ADAPTATION TO MEASURE . ANGSER ELECTRIC GUARANTEE . SECTORAL MONITORING . ADJUSTABLE SECTORAL BARREL
ANGSER ELECTRIC PIVOTS CHARACTERISTICS
After many hours in the field, in direct collaboration with our customers and with the final users, at ANGSER ELECTRIC we are pleased to present our models for the management of irrigation pivots. We wanted to make a simple model which we have named SINGLE that although simple has functions like: 1 output for barrel valve, auto-reverse function (in the circular models), regulation of advance speed, or possibility of advance in dry. On the other hand, there is an advanced model, which we have named PREMIUM, that adds outputs for 2 cantilever valves, that can be programmed, the same as the limits of the trajectory depending on the position of the pivot (measured in degrees) with an analogue potentiometer. On the other hand, in case of misalignment, or another safety fault, a timer will cancel it a few seconds by request via a switch. Therefore we can align the pivot without needing to be pressing the safety switch constantly. Finally, a remote control system can be added to order the start-up, change the advance percentage, activate or deactivate the auto-reverse function from any mobile telephone; and receive message with detected anomalies (absence of pressure, safety...) Both models are manufactured in lineal and circular versions. At ANGSER ELECTRIC we bet that because of the closeness to our customers and despite that these 2 models have been created with regards to the needs of the majority of users, we can adapt to the particular requests of each installer , since the control is done with software that we develop ourselves, As with the rest of ANGSER ELECTRIC products, the panels can be personalised with the logo and contact information of the customer; we take care in the finish and presentation of our products as if they were decorative products.