Interlock® Tile Spec Manual

Page 1

Interlock® Tile Specification Manual

Lifetime Roofing Systems ®


Interlock® Tile Interlock Tile is an aluminum tile hidden fastener roofing system. It is specially designed to match the appearance of conventional tile roofing. The tile panels are coated with Alunar® for ultimate durability and protection. All trims are color matched to the specific Interlock color. Interlock Tile provides outstanding advantages when compared to other roofing materials.

Durability

Design Flexibility

Unique design provides incredible strength and protects against severe weather.

The look of tile is provided without the heavy cost of structural modifications. Interlock Tile can be adapted to almost any roof line and over most existing roofs.

Lightweight Interlock Tile is very lightweight, having a dry or wet weight of 70 lbs. per 100 sq. ft. This is about 96% lighter than concrete or clay tile. Huge savings are realized in structural costs for new homes and developments, as truss systems can be designed for less stress and weight loads.

Environmentally Friendly Sustainable, recyclable and helps stop roofing material going to the landfill.

Lifetime Limited Warranty Non-prorated, and one-time transferable.

Low Maintenance Tail Height .472" 9"

Panel Fasteners are concealed to preserve authentic tile appearance & provides for panel expansion & contraction

Tail Length 1.18"

Tile Step 15" Profile Height 1.2"

Step Height .709" Gauge of material 0.028” Aluminum base coated with:

Eave Height .709" 18" Coverage

1

Tile Panel Detail

Eave Length .118"


Roof Slope Minimum 3:12 when installed with an ice & water underlayment or 4:12 minimum with synthetic underlayment.

Underlayment The entire roof area is to be covered (prior to Tile application) with synthetic roofing underlayment.

Sheathing Sheathing for the roof should not be less than 1/2”. Optional - spaced over existing roof with strapping min. 1” x 4” spaced 15” on center.

Trusses For new developments, enormous cost savings can be realized as Interlock® Tile weighs less than 4% the weight of concrete clay and tile, and much less than other roofing systems.

Interlock Tile 15”

4”

4” Roofing Underlayment Step 1/2”

2 1/2”

Sheathing Exterior Grade Truss

Starter Flashing

1/2”

It is the responsibility of architects, builders, and roof installers to ensure that all construction bylaws and building codes are met and adhered to.

2

Tile Components


All Tile components are secured with non-corrosive stainless steel or aluminum fasteners. All component trims are coated with the Alunar® Coating System and are based on standard 10 foot lengths except ridge, hip, and gable capping. Screw fasteners are color matched to roof trims and components.

Tile Ridge Cap Designed to complement any installation requirement, fitting any ridge or hip roof angle. Manufactured in standard 48” lengths secured to C-Channel.

14.625"

44” Coverage 1/2"

30°

6.5"

10.12"

Tile Gable Cap A specially designed component that lends beauty and structural superiority to the roofing system, while providing outstanding protection for gable ends. Manufactured in standard 49” lengths secured to C-Channel. 2” 45” Coverage 14” ½”

49 ½ ” 6 ½”

3

Tile Components

2 ¾”


Starter Flashing Carefully manufactured to give a greater degree of strength to the starter strip. The protruding edge is an effective drip cap which further reduces the possibility of capillary seepage. Manufactured in 10’ lengths. 4” 2 ½”

½”

End Wall Trim Provides a weathertight seal around chimneys, end walls, skylights, etc. Manufactured in 10’ lengths.

4” 6” ½”

Side Wall Trim Provides a weather-tight seal around chimneys, end walls, skylights, etc. Manufactured in 10’ lengths.

4”

6” ½”

4

Tile Components


Valley Trim Provides a smooth, obstruction-free path for precipitation - no projections to catch debris or snow. Panels are installed to form a solid weather-proof unit. This specially designed trim is manufactured in 10’ lengths.

½”

70° 10 ½” 1”

C-Channel Technically designed to provide a secure base for Tile Ridge Caps and Gable Caps. 3” /8”

3

2” 6 ½”

½”

Plumbing Vent A special flashing for plumbing stack pipes.

5

Tile Components


I

D

J

G A

F

H E

C B

A B C D E F G H I J

6

Interlock Tile Starter Gable 1/2” (min) Sheathing C-Channel Tile Gable Cap Endwall Trim Side Wall Flashing Underlayment Tile Ridge Cap Valley Trim

Components

D

Testing Reports ICC Evaluation Report 1790 CCMC Evaluation Report 10475-R Florida Report FL 7263 Texas Department of Insurance - Hail Impact UL2218 Class IV


Color Guide Interlock Roofing Ltd. offers a highly durable aluminum roofing product available in a range of different colors, opening up an extensive palette for homeowners and designers. Interlock® roofs are exclusively protected for a lifetime by the Alunar® Coating System.

Solid Copper

Copper Penny

Hunter Green

Black

Deep Charcoal

Musket Grey

Tile Red

Colonial Brown

Tudor Brown

Actual product color may differ to that represented on manual. Product design and installation technique may vary from represented shown on manual. Installation methods may vary by structure, region, climate, and local building codes. Certain variables and factors specific to your home may inhibit the product’s ability to shed snow. Roofing products and components may change without notice. Please see our website for more information.

Interlock Roofing Ltd.

Interlock Roofing Ltd. 1-866-766-3388 www.InterlockRoofing.com 9969 River Way 1-866-766-3388 www.InterlockRoofing.com © 2015 The Interlock Group. Interlock®, Interlock Lifetime Roofing Systems®, Alunar® are registered trademarks of I.E.L. Manufacturing Ltd. and are used under license. Delta, V4G 1M8 TEFLON®BC is a registered Trademark of E.I. du Pont de Nemours and Company used under license. 9969 River Way, Delta, BC V4G 1M8

When installed properly, this product will help reduce energy costs. Actual savings will vary based on geographic location and individual building characteristics. SP20150417

© 2022 The Interlock Group. Interlock®, Interlock Lifetime Roofing Systems®, Alunar®, Never Re-Roof Again.®, and Arrow sign are registered trademarks of I.E.L. Manufacturing Ltd. and are used under license. SP20211206