Page 1

PowerSmart Technical specifications

The PowerSmart 2480 has been designed to provide 24 / 48 VDC or 110 / 220 VAC power to external amplifiers / BUCs, and includes features to support Monitor and Control (M&C) functions for several products. Most DC / AC powered BUCs, SSPAs and TWTAs can be integrated with the PowerSmart 2480, for an efficient and convenient hardware solution to provide POWER plus M&C control to an outdoor transmitter unit.

Features

• 19 inch 1U rack mount unit • Amplifier functions such as TX Enable / Disable and operational status can be monitored and controlled from a convenient operator control panel. (1)

• The amplifier manufacturer’s software can typically be operated from a PC platform through the configurable port, over RS232, RS485 or SNMP interface as required.

• Enabling the Transmit function, monitoring BUC faults and the

presence of 10 MHz reference on the IFL, verifying output power level and other common functions along with the rack mount format make the PowerSmart 2480 a value-added solution to higher-powered VSAT applications.

• Configuration parameters, onboard statistics and fault 

information can be accessed via the amplifier’s control interface (if available) through a convenient data port on the panel.

• Optional support for Bias-T, DC Blocker, MUX-T with 10 MHz clock, all in one convenient rack mount enclosure.

• Standard 2-Year Warranty

Note: (1) Listed features are BUC dependent. Some front panel features related to M&C control may not be supported by some BUC manufacturers. Please inquire for further clarifications.

Application Versatility

The iNetVu® PowerSmart 2480 is ideal for applications where a VSAT transmitter / amplifier requires more power than a satellite modem can provide over the TX output. This is typical for larger Block Up Converters (BUC) or Power Amplifiers (SSPA, TWTA etc.) that supply over 8 Watts RF output power.

www.intellisystem.it

Via Augusto Murri N°1 - 96100 Siracusa (ITALY) info@intellisystem.it +39 (0)931-1756256 +39 335 1880035

Integrated Satellite Solutions Specifications are subject to change

May 2016


PowerSmart Technical specifications

Environmental

Operational Temperature Storage Temperature Humidity

-20º C to +60º C (-4º F to 140º F) -40º C to +85º C (-40º F to 185º F) 10 - 95% RH

Front Panel Switches

Power BUC Control (1)

ON / OFF Enable / Disable transmitter

Compatibility

Physical

Dimensions Weight

W: 48.3 cm (19”) D: 36.2 cm (14”) H: 4.5 cm (2”) 6.3 kg (14 lbs)

Supports most AC / DC Powered BUC in the market

PC Interface

DB9 on front panel used to access BUC Software via PC

Bias-T Thruplexer (Optional)

C-COM standard C-COM Mux-T

L-Band and 10 MHz pass (not generated) Provides 10 MHz Reference Generation Capability L-Band pass clock, plus DC / DC Block

Output

Model Voltage Rated Current Rated Power

PS-2480A 48VDC 10 Amp 480 W

PS-2480B 24VDC 20 Amp 480 W

PS-2480C 110 / 220VAC 6.5A / 115VAC 3.5A / 230VAC

PC Interface

RS-232 RS-485 SNMP

BUC / AMP dependent - PS-2480 Adaptable / configurable BUC / AMP dependent - PS-2480 Adaptable / configurable BUC / AMP dependent - PS-2480 Adaptable / configurable

* RS-232 / RS-485 interfaces are physically interchangeable and don’t require seperate power source Certifications

FCC, CE, QPS

Input

Voltage Range Frequency Range AC Current

85 - 264VAC 47 - 63 Hz 6.5A / 115VAC 3.5A / 230VAC

www.intellisystem.it

Via Augusto Murri N°1 - 96100 Siracusa (ITALY) info@intellisystem.it +39 (0)931-1756256 +39 335 1880035

Integrated Satellite Solutions Specifications are subject to change

May 2016

IT-ISS POWERSMART - Accessories & Controller  

The PowerSmart 2480 has been designed to provide 24 / 48 VDC or 110 / 220 VAC power to external amplifers / BUCs, and includes features to s...

IT-ISS POWERSMART - Accessories & Controller  

The PowerSmart 2480 has been designed to provide 24 / 48 VDC or 110 / 220 VAC power to external amplifers / BUCs, and includes features to s...

Advertisement