Page 402

COUPLINGS, ADAPTERS AND ATTACHMENT KITS

Couplings, Adapters and Attachment Kits

BASE/LOAD CELL ADAPTORS

GRIP ADAPTERS

Catalog Number

Description

Catalog Number

Description

2501-113

Crosshead/base adapter, rated capacity: 100 kN 6 × M10 on 10OPC to 1/2 in accessory clevis-end fitting

2501-194

Piggyback Adapter, rated capacity: 100 kN, converts pneumatic wedge grips 2716-110, 2716-120 to M30×2 LH with 6 x M10 on 100 PCD)

2501-148

Crosshead/base adapter, rated capacity: 100 kN 6 × M10 on 10OPC to M48x2 LH accessory threaded-end fitting

2501-208

2501-086

Crosshead/base adapter, rated capacity: 100 kN 6 × M10 on 10OPC to M30x2 LH accessory threaded-end fitting

Piggyback Load Cell Adapter for use with Type D load cell clevis. Allows the high capacity cell to remain bolted to the crosshead while a more sensitive, low capacity cell is installed. Bolts to load cell and provides a Type D f (1/2” clevis) attachment. For mounting 2580 Series load cells. Compatible with 500 N, 1kN, 1kN & 5kN capacities only.

2501-119

Adapter, rated capacity: 100 N, 1/2 in to 3/16 in accessory clevis-end fitting

2501-209

Piggyback Load Cell Adapter for use with Type D load cell clevis. Allows the high capacity cell to remain bolted to the crosshead while a more sensitive, low capacity cell is installed. Bolts to load cell and provides a Type D f (1/2” clevis) attachment. For mounting 2580 Series load cells. Compatible with 10kN, 30kN & 50kN capacities only.

2501-346

Adapter, rated capacity: 10 kN, 1/2 in to 6 mm accessory clevis-end fitting

2501-159

Adapter, rated capacity: 10 kN, 16 mm to 6 mm accessory clevis-end fitting

2501-210

Piggyback Load Cell Adapter for use with Type D load cell clevis. Allows the high capacity cell to remain bolted to the crosshead while a more sensitive, low capacity cell is installed. Bolts to load cell and provides a Type D f (1/2” clevis) attachment. For mounting 2530 Series load cells. Compatible with 5 N, 10 N, 50 N, 100 N, 500 N, 1kN, 2kN & 5kN capacities only.

2501-338

Adapter, rated capacity: 100 kN, 1/2 in to 16 mm accessory clevis-end fitting 2501-235

Adapter for mounting 2530, 2525 or 2518 load cells on 338X floor model systems. The lower capacity load cell can be either connected to the 338X load cell or the 338X load cell can be removed and the lower capacity load cell can then be connected directly to the crosshead.

8000-025

6.2

399

M30LHm to 1/2” clevis pin (Type Df)

Profile for Instron

Instron - Accessories for Materials Testing - Seventh Edition  

Recommendations could not be loaded

Recommendations could not be loaded

Recommendations could not be loaded

Recommendations could not be loaded