Accessories MSF DIN 41 612 PC board lever
Lever set for PC board extraction and installation of coding elements
The lever has to be mounted on the PC board and helps to lift the board up to disengage it from the mating connector on the back panel and is also designed to accomodate the coding elements.
Part No. LPH-1 The PC board lever comes as an installation kit with all necessary piece parts for one board. Coding elements have to be ordered separately. See page 23 for application information.
Coding element
Hexagonal coding elements to be used with PC board lever
Hexagonal coding element to be used with hood DG48MSF-1 and DG48MSF-3.
Part No. KOE-1 1 set consists of 4 coding elements
One pair has to be installed in the pre-determined position of the hood and the other pair inside the PC board lever.
Adapter DTE-x L
L
See page 23 for application information.
Connector positioning adapter set for connector types E
R
Adapter set for E type connectors according to DIN 41 612 to be used in hood no. DG48MSF-1 or -3
Adapter set for E type connectors according to DIN 41 612 to be used in hood no. DG48MSF-1 or -3
R
Part No. DTE-1 1 set (left and right)
Part No. DTE-2 1 set (left and right)
See page 23 for application information.
Adapter DTF-x L
L
Connector positioning adapter set for connector types F+H
R
R
Adapter set for F+H type connectors according to DIN 41 612 to be used in hood no. DG48MSF-1 or -3
Adapter set for F+H type connectors according to DIN 41 612 to be used in hood no. DG48MSF-1 or -3
Part No. DTF-1 1 set (left and right)
Part No. DTF-2 1 set (left and right)
See page 23 for application information.
28
P R O F E S S I O N A L Q U A L I T Y F O R P R O F E S S I O N A L A P P L I C AT I O N S .