Page 1

Tri-Lobe System Catalog

RePlus®

ReActiveTM

RePlant®


Table of Contents Page # Implant Design

1- 2 3

Implant Details

4-9 10

Clinical Procedure: Temporary Abutment with Fixture-Mount

LOCATOR® Abutments, Components

26-27

28-31 RePlant®: Drills, Surgical Tray

SMARTbase CAD/CAM

22-24

25 Surgical and Prosthetic Instruments

Prosthetic Technique: Insertion of Abutments with Tri-Lobe Offset

20

21 SMART PACKS, Multi-Unit, Ball Abutments, Components

SMART PACKS, Snap-on Abutments, Components

17-18

19 Gold, Plastic, Titanium Abutments, Scan Adapters

Selection Chart: Implants, Abutments, Components

14

15-16 Titanium, Zirconia, Lab Abutments

All-in-One Packaging

11 12-13

Healing Collars, Transfers, Analogs, Alignment Tools

Labeling

32-36

RePlus®/ReActiveTM: Drills, Surgical Tray


Implant Design

Mini-Threads with Double-lead Threads for Faster Insertion The bodies of the RePlus® and ReActiveTM implants are tapered evenly from the top to facilitate insertion into an undersized socket in soft bone providing compression that increases initial stability (G. Niznick: Clinical Oral Health 2000 “Achieving Success in Soft Bone”). The RePlant® implant is designed with a straight/tapered profile matching that of the NobelReplace®* Implant (Nobel BiocareTM). Minithreads start 1.0mm below the crest of the bone and extend approximately 2.0­­mm before transitioning into double-lead threads to the apex of the implant. The mini-threads, half the depth and pitch of the double-lead body threads, reduce stress in the critical crestal bone region, while double-lead threads reduce the number of turns required to seat the implant. Vertical cutting grooves extend halfway up the implant from the apex for self-tapping insertion. All three implants are available with SBM textured surface over the entire implant and HA is an option for ReActiveTM. Standard V-Thread

Standard V-Thread

Quadruple Lead MiniThreads

Buttress Thread All three Implant Direct Tri-Lobe implants have Mini-threads for reduced stress near the crest of bone, and double-lead threads on the body for 2X faster insertion

0.3mm

The 1.5o taper to the OD of the RePlus® and ReActiveTM implants facilitate bone expansion for increased stability.

0.6mm

Double Lead Threads

0.85mm

1.5 Deg. OD Taper

1.5 Deg. OD Taper RePlant® duplicates the body design of NobelReplace

0.45mm

3.0 Deg. ID Taper­­

1.5 Deg. ID Taper

RePlus® features threads with the same 1.5o taper to the inside (ID) and outside (OD) thread diameters for optimum soft bone compression

1.5 Deg. OD Taper

ReActiveTM offers greater thread engagement by tapering the inside thread diameter (ID) at 3o while the outside thread diameter (OD) tapers at 1.5o

SBM and HA Coated Surface Options SBM surface is created by using a Soluble Blast Media of Hydroxylapatite (HA) crystals to create a medium-rough texture. We use the same vendor for its SBM and HA coated surface treatments as used by Paragon Implant Company from 1992-2000 when these studies were conducted. SEM Examination of Our Surfaces Mini-threads textured by blasting with SBM™: Blasted with Soluble HA Particles HA Coating: High Crystalline 40u layer ReActiveTM Implant has an HA option. SBM Surface 20X

SBM Surface 50X

HA Surface 20X

HA Surface 50X

Animal Studies Bone Response to SBM Surface

*Registered Trademark of Nobel Biocare™

1


Implant Design RePlus® and ReActiveTM Implants

3.5mmD Platform

4.3mmD Platform

5.0mmD Platform

0.3.0mm Supra-Crestal 1.0mm Unthreaded Collar 3.0mmL

4.0mmL

M1.8 Internal Thread

M2.0 Internal Thread

Implant Length (13.0mm)

SBM Surface Texture

4.7mmD RePlus®

4.2mmD RePlus®

3.7mmD RePlus®

5.7mmD RePlus®

4.1mmD Apex

3.6mmD Apex

3.1mmD Apex

5.1mmD Apex

RePlant® Implants

3.5mmD Platform

4.3mmD Platform

5.0mmD Platform

6.0mmD Platform

1.0mm Unthreaded Collar 3.0mmL M1.8 Internal Thread

Implant Length (13.0mm)

4.0mmL

5.8mmL

M2.0 Internal Thread

6.1mmL 6.5mmL

6.9mmL

SBM Surface Texture

3.5mmD RePlant® 2.6mmD Apex

2

*Registered Trademark of Nobel Biocare™

4.3mmD RePlant® 2.7mmD Apex

5.0mmD RePlant® 3.1mmD Apex

6.0mmD RePlant® 3.7mmD Apex


Labeling

Implants

604313 RePlant® Implant

4

SBM®

5

Size: 4.3mmD x 13mmL,

6

Qty: 1

4.3mmD Platform

Use by date XXXX-XX-XX Do not open Do not re-use if damaged Consult instructions for use

7 8 9

604313 RePlant® Implant XXXXX

3

2

16

604313 RePlant® Implant XXXXX

60 = RePlant® SBM 43 = 4.3mmD body diameter 13 = 13.0mmL body length

(XX)XXXXXXXXXXXXXX(XX)XXXXXX(XX)XXXXX

1

17

Made in USA

10 12

15

11

13

14

4

6043-21 RePlant® Straight Abutment

6

Size: Platform: 4.3mm

3 5

Includes: Dual-Grip Screw, Transfer & Comfort Cap

Qty: 1

Do not re-use

18 8 9

Do not open if damaged Consult instructions for use

10

12

16

6043-21 RePlant® Abutment XXXXX

2

6043-21 RePlant Abutment XXXXX

60 = RePlant® prosthetics 43 = 3.4mmD platform diameter -21= prosthetic specific code

®

1

(XX)XXXXXXXXXXXXXX(XX)XXXXXX(XX)XXXXX

Prosthetics

Made in USA

13

15

16 14

1) Our products carry the CE mark and fulfill the requirements of the Medical Device Directive 93/42/EEC 2) Manufacturer Symbol 3) Product code or reference number 4) Product Description 5) Item quantity 6) Product dimensions 7) Use by date (XXXX-XX) 8) Tamper proof symbol 9) Refer to Instructions For Use (IFU) 10) Do not re-use symbol 11) Sterilized using gamma irradiation symbol 12) Caution: US law restricts the sale of these devices by or on the order of a dentist or physician 13) Country of origin 14) Unique Device Identification (UDI) barcode and text 15) Lot number (XXXXXX) 16) Implant prosthetic platform diameter (written and color-coded) 17) Implant diameter color reference on surgical tray 18) Non-sterile symbol

3


RePlant®: Features & Benefits

All-in-One Packaging • Straight/Tapered body design and dimensions match NobelReplace®* Tapered Groovy implant allowing insertion with Nobel Biocare’s drills • Tri-Lobe color-coded platform is compatible with NobelReplace®* abutments • SBM (Soluble Blast Media) textured surface to top of implant • Color-coded Fixture-Mount usable as a transfer and shortened for use as a temporary abutment • Use of titanium alloy for an increase in strength compared to Nobel Biocare’s Tri-Lobe implants manufactured from CP titanium

3.5mmD Platform

4.3mmD Platform

5.0mmD Platform

Carrier/Transfer

6.0mmD Platform

Cover Screw

3.5mmD Implant

4

4.3mmD Implant

*Registered Trademark of Nobel Biocare™

5.0mmD Implant

6.0mmD Implant

Placing Carrier/Transfers & Making Impressions

Color-coded Titanium Fixture-Mount carrier

Align flat to labial for indexing of tri-lobe

Fixture-Mount is screw-retained

Use Fixture-Mount as closed tray transfer


RePlant®: Two-Piece Implant Use RePlant® surgical tray or Nobel Biocare’s Tapered Replace®* implant drills for insertion of RePlant® implant

SBM Surface Implants

Incl. Carrier/Transfer, Dual-Grip™ Fixation and Cover Screw

3.5mmD Code 603508 603510 603511 603513 603516

Diameter 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

Length 8.0mmL 10.0mmL 11.5mmL 13.0mmL 16.0mmL

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

Diameter 4.3mmD 4.3mmD 4.3mmD 4.3mmD 4.3mmD

Length 8.0mmL 10.0mmL 11.5mmL 13.0mmL 16.0mmL

Platform 4.3mmD 4.3mmD 4.3mmD 4.3mmD 4.3mmD

Diameter 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD

Length 8.0mmL 10.0mmL 11.5mmL 13.0mmL 16.0mmL

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD

Diameter 6.0mmD 6.0mmD 6.0mmD 6.0mmD 6.0mmD

Length 8.0mmL 10.0mmL 11.5mmL 13.0mmL 16.0mmL

Platform 6.0mmD 6.0mmD 6.0mmD 6.0mmD 6.0mmD

603508

603510

603511

603513

603516

604308

604310

604311

604313

604316

605008

605010

605011

605013

605016

606008

606010

606011

606013

606016

4.3mmD Code 604308 604310 604311 604313 604316

5.0mmD Code 605008 605010 605011 605013 605016

6.0mmD Code 606008 606010 606011 606013 606016 Cover Screws

Code 6035-01 6043-01 6050-01 6060-01 *Registered Trademark of Nobel Biocare™

Components include Dual-Grip™ feature for use with 1.25mmD Hex Tool or Nobel Unigrip Screwdriver­­­­­­

Platform 3.5mmD 4.3mmD 5.0mmD 6.0mmD

6035-01

6043-01

6050-01

6060-01

5


RePlus®: Features & Benefits

All-in-One Packaging • Tri-Lobe color-coded platform is compatible with NobelReplace®* abutments • Color-coded Fixture-Mount usable as a transfer and shortened for use as a straight final abutment with snap-on comfort cap • Surface options: SBM (Soluble Blast Media) • Platform-shifting with RePlant® and NobelReplace®* abutments

3.5mmD Platform

4.3mmD Platform

Carrier/Transfer

5.0mmD Platform

Snap-On Cover Screw Comfort Cap

3.7mmD & 4.2mmD Implant

4.7mmD Implant

5.7mmD Implant

Transfer: Shortened for final abutment with Snap-on Comfort Cap and Transfer

step 1

6

*Registered Trademark of Nobel Biocare™

step 2

step 3

step 4


RePlus®: Two-Piece Implant

SBM Surface Implants 3.7mmD

SBM Code 703708 703710 703711 703713 703716

Incl. Carrier/Transfer, Dual-Grip™ Fixation Screw, Cover Screw and Comfort Cap

Diameter

Length

Platform

3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD

8.0mmL 10.0mmL 11.5mmL 13.0mmL 16.0mmL

3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

Diameter 4.2mmD 4.2mmD 4.2mmD 4.2mmD 4.2mmD

Length 8.0mmL 10.0mmL 11.5mmL 13.0mmL 16.0mmL

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

Diameter 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD

Length 8.0mmL 10.0mmL 11.5mmL 13.0mmL 16.0mmL

Platform 4.3mmD 4.3mmD 4.3mmD 4.3mmD 4.3mmD

Diameter 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

Length 8.0mmL 10.0mmL 11.5mmL 13.0mmL 16.0mmL

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD

703708

703710

703711

703713

703716

704208

704210

704211

704213

704216

704708

704710

704711

704713

704716

705708

705710

705711

705713

705716

4 ­­ .2mmD SBM Code 704208 704210 704211 704213 704216

4.7mmD SBM Code 704708 704710 704711 704713 704716

5.7mmD SBM Code 705708 705710 705711 705713 705716

7


ReActiveTM: Features & Benefits

All-in-One Packaging • Tri-Lobe color-coded platform is compatible with NobelReplace®* abutments • Color-coded Fixture-Mount usable as a transfer and shortened for use as a platform-switching straight final abutment • Surface options: SBM (Soluble Blast Media) or HA-coated • Platform-switching with RePlant® and NobelReplace®* abutments • Buttress threads with increased thread depth providing greater surface area for bone attachment and primary implant stability

3.5mmD Platform

4.3mmD Platform

Carrier/Transfer

5.0mmD Platform Cover Screw

3.7mmD & 4.2mmD Implant

4.7mmD Implant

5.7mmD Implant

Placing Carrier/Transfers & Taking Impressions

Transfer: Shortened to fabricate final abutment

step 1

Color-coded titanium Align flat to labial for Fixture-Mount carrier indexing of tri-lobe

Fixture-Mount is screw retained

8

*Registered Trademark of Nobel Biocare™

Use Fixture-Mount as closed tray transfer

step 2


ReActiveTM: Two-Piece Implant

SBM and HA Surface Implants 3.7mmD

SBM Code 753708 753710 753711 753713 753716

Incl. Carrier/Transfer, Dual-Grip™ Fixation Screw and Cover Screw

HA­ Code 763708 763710 763711 763713 763716

Diameter 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD

Length 8.0mmL 10.0mmL 11.5mmL 13.0mmL 16.0mmL

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

HA­ Code 764208 764210 764211 764213 764216

Diameter 4.2mmD 4.2mmD 4.2mmD 4.2mmD 4.2mmD

Length 8.0mmL 10.0mmL 11.5mmL 13.0mmL 16.0mmL

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

HA­Code 764708 764710 764711 764713 764716

Diameter 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD

Length 8.0mmL 10.0mmL 11.5mmL 13.0mmL 16.0mmL

Platform 4.3mmD 4.3mmD 4.3mmD 4.3mmD 4.3mmD

HA­ Code 765708 765710 765711 765713 765716

Diameter 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

Length 8.0mmL 10.0mmL 11.5mmL 13.0mmL 16.0mmL

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD

753708 763708

753710 763710

753711 763711

753713 763713

753716 763716

754208 764208

754210 764210

754211 764211

754213 764213

754216 764216

754708 764708

754710 764710

754711 764711

754713 764713

754716 764716

755708 765708

755710 765710

755711 765711

755713 765713

755716 765716

4.2mmD SBM Code 754208 754210 754211 754213 754216

4.7mmD SBM Code 754708 754710 754711 754713 754716

5.7mmD SBM Code 755708 755710 755711 755713 755716

9


All-in-One Packaging The RePlant®, RePlus® and ReActiveTM implants are mounted on color-coded Fixture-Mounts, designed for use as implant level transfers or shortened to function as abutments. A cover screw is included in each vial. The RePlus® Fixture-Mount is provided with a snap-on comfort cap.

Prepare surgical site with double cutting step drill

All the implants come in a sterile vial

Each cap is color-coded by platform diameter of implant

Drop implant assembly out of vial onto a sterile surface

Remove implant assembly with a Fixture-Mount drill or ratchet

Insert implant into osteotomy

Index Fixture-Mount flat to labial

Remove Fixture-Mount

The flat of the Fixture-Mount aligned the lobe to the labial

Remove the holder containing the cover screw & comfort cap

Snap-on comfort cap is located in the top portion of holder

Attach Fixture-Mount to corresponding color-coded implant analog

Attach abutment using 30Ncm in hard bone & finger pressure in soft bone

10

Each label is color-coded with two tear-off labels

Check for occlusal clearance prior to attaching comfort cap

Remove colored section from Fixture-Mount through groove to create abutment

Test retention & rotate if necessary to increase retention

Suture soft tissue around comfort cap


Clinical Procedure: Temporary Abutment with Fixture-Mount

1. Unthread the healing collars from the implant using appropriate driver. The top of the implants are exposed.

2. Use the prepared implant Fixture-Mount as a temporary abutment (reshaping of tri-lobe at apex is essential) or select the Titanium Temporary Abutment matching the implant prosthetic platform.

3. Place the fixation screw through the abutment and tighten in place using the appropriate driver. The torque value of the fixation screw is determined by clinician. Standard torque value is 30Ncm.

4. Confirm there is less than 40 degrees of relative divergence between abutments to be splinted together.

5. Mark position of Titanium Temporary Abutments on under surface of denture with indelible marker.

6. Use acrylic trimmer to drill holes through denture corresponding to marked positions.

7. Seat denture over Titanium Temporary Abutment to confirm passive placement. Check occlusion with opposing arch. Occlude screw access hole with cotton pellet.

8. Use autopolymerizing acrylic or similar light cure material to attach prosthesis to Titanium Temporary Abutments. Allow to set prior to removal from mouth.

9. Remove prosthesis from the mouth, flip over to expose tissue side. Use additional autopolymerizing resin to fill in any voids around the processed abutments.

10. Optional step: Attach implant analogs to base of denture. Pour a soft tissue working cast to prevent engagement with undercuts. Articulate with opposing arch.

11. Remove denture and trim the prosthesis to allow access for patient cleaning. The prosthesis is now a fixed restoration, removable by clinician only.

12. Attach prosthesis to implants and tighten in place using the appropriate tooling. Occlude screw access holes with material of choice.

11


Selection Charts: Implants, Abutments and Components 4.3mmD Platform

3.5mmD Platform Carrier/Transfer

Cover Screws, Healing Collars,Transfers and Implant Analogs

6035-01

6035-13 6035-15

6035-05

6035-13N 6035-15N

6035-21

Temporary and Customizable Abutments

6035-06D

6043-01

6043-13 6043-15

6035-31 6035-32

6035-31C 30/60/90° 6035-32C 6035-32-30 6035-32-60 6035-32-90

6035-30L

6035-40 6035-41

3037-02

6035-23

6035-22

6035-46

Ball, Multi-Unit and LOCATOR® Abutments

6035-47

6035-49

6035-90-L

6035-62

6035-91-L

6043-21

6035-80 6035-82

6035-80NE

6035-82NE

6043-31 6043-32

6043-30L

6035-64

6035-92-L

6035-64-15

6035-93-L

6035-94-L

6043-22

6043-31C 6043-32C

6043-40 6043-41

6043-23

30/60/90° 6043-32-30 6043-32-60 6043-32-90

6043-51 6043-52

6043-47

6043-46

6035-74

6035-72

6035-61

3037

6035-51 6035-51-15C 6035-51-08C 30/60/90° 6035-52 6035-52-15C 6035-52-08C 6035-52-30 6035-52-60 6035-52-90

6043-72

6035-64-30

6035-95-L

6043-61

6043-62

6043-64

6043-90-L 6043-91-L 6043-92-L 6043-93-L 6043-94-L †

12

6043-05

6043-13N 6043-15N

3037-26

Straight Abutments, Comfort Caps, Transfers and Abutment Analogs

Straight and Angled Contoured Abutments

6035-08

non-engaging


6.0mmD Platform

5.0mmD Platform Carrier/Transfer

Carrier/Transfer

6043-06D

6043-08

6050-13N 6050-15N

6050-13 6050-15

6050-01

6050-05

3047

6043-51-15C 6043-51-08C 30/60/90° 6043-52-15C 6043-52-08C 6043-52-30 6043-52-60 6043-52-90

6043-80 6043-82

6043-80NE 6043-82NE

6050-21

6050-31 6050-32

6050-22

6050-31C 6050-32C

6050-30L

6043-64-30

6043-95-L

6050-40 6050-41

30/60/90° 6050-32-30 6050-32-60 6050-32-90

6050-46

6043-74

6043-64-15

6060-01

6060-05

6060-13N 6060-15N

6060-13 6060-15

6050-51 6050-52

6050-47

3057

3057-02

6050-23

6050-51-15C 6050-52-15C

6050-49

6050-51-08C 6050-52-08C

6050-80 6050-82

6060-22

6060-21

6050-80NE 6050-82NE

6060-30L

6060-46

30/60/90° 6060-32-30 6060-32-60 6060-32-90

6060-47

6060-49

6060-72

6050-61

6050-62

6050-64

6050-64-15

6050-64-30

6050-91-L

6050-92-L

6050-93-L

6050-94-L

6050-95-L

6060-61

3065

3065-02

6060-23

6060-31 6060-32

30/60/90° 6050-52-30 6050-52-60 6050-52-90

6050-74

6050-72

6060-06D

6060-08

3065-26

3057-26

3047-02

6043-49

6050-06D

6050-08

3047-26

Carrier/Transfer

6060-51 6060-52

6060-80 6060-82

† †

6060-80NE 6060-82NE

6060-74

6060-62

6060-64

13


Healing Collars, Transfers, Analogs and Alignment Tools Healing Collars

Code 6035-13 6035-15 6043-13 6043-15 6050-13 6050-15 6060-13 6060-15

Components include Dual-Grip™ feature for use with 1.25mmD Hex Tool or Nobel Unigrip Screwdriver­­­­­­

Width 4.6mmD 4.6mmD 5.6mmD 5.6mmD 6.1mmD­­ 6.1mmD 6.6mmD 6.6mmD

Length 3.0mmL 5.0mmL 3.0mmL 5.0mmL 3.0mmL 5.0mmL 3.0mmL 5.0mmL

Narrow Healing Collars

Code 6035-13N 6035-15N 6043-13N 6043-15N 6050-13N 6050-15N 6060-13N 6060-15N

Width 3.5mmD 3.5mmD 4.3mmD 4.3mmD 5.0mmD­­ 5.0mmD 6.0mmD 6.0mmD

Length 3.0mmL 5.0mmL 3.0mmL 5.0mmL 3.0mmL 5.0mmL 3.0mmL 5.0mmL

Platform 3.5mmD 4.3mmD 5.0mmD 6.0mmD

Platform 3.5mmD 3.5mmD 4.3mmD 4.3mmD 5.0mmD 5.0mmD 6.0mmD 6.0mmD

Replacement Screw 1000-28 1000-27 1000-27 1000-27

6050-13

6060-13

6035-15

6043-15

6050-15

6060-15

6035-13N

6043-13N

6050-13N

6060-13N

6035-15N

6043-15N

6050-15N

6060-15N

1000-28

1000-27

6035-05

6043-05

6050-05

6060-05

1000-12

1000-11

6035-08

6043-08

6050-08

6060-08

6035-06D

6043-06D

6050-06D

6060-06D

6035-07

6043-07

6050-07

6060-07

Incl. Long Fixation Screw [Requires 1.25mmD Hex Tool]

Platform 3.5mmD 4.3mmD 5.0mmD 6.0mmD

Titanium Implant Analogs

6043-13

Incl. Dual-Grip™ Fixation Screw

Open-Tray Implant Transfers

Code 6035-08 6043-08 6050-08 6060-08

6035-13

Components include Dual-Grip™ feature for use with 1.25mmD Hex Tool or Nobel Unigrip Screwdriver­­­­­­

Closed-Tray Implant Transfers

Code 6035-05 6043-05 6050-05 6060-05

Platform 3.5mmD 3.5mmD 4.3mmD 4.3mmD 5.0mmD 5.0mmD 6.0mmD 6.0mmD

Replacement Screw 1000-12 1000-11 1000-11 1000-11 New

Code 6035-06D 6043-06D 6050-06D 6060-06D

Platform 3.5mmD 4.3mmD 5.0mmD 6.0mmD

Lab Abutment Alignment Tools

Code 6035-07 6043-07 6050-07 6060-07

14

Platform 3.5mmD 4.3mmD 5.0mmD 6.0mmD


SMART PACKS and Snap-on Abutments simplycrown&bridge SMART PACKS

Incl. Straight Abutment, Transfer, Analog, Castable Coping, Comfort Cap & Fixation Screw with Dual-Grip™

Code 6035-21K 6035-22K 6035-23K 6043-21K 6043-22K 6043-23K 6050-21K 6050-22K 6050-23K 6060-21K 6060-22K 6060-23K

Platform 3.5mmD 3.5mmD 3.5mmD 4.3mmD 4.3mmD 4.3mmD 5.0mmD 5.0mmD 5.0mmD­­­­ 6.0mmD 6.0mmD 6.0mmD

Collar Heights 1.0mm 2.0mm 3.0mm 1.0mm 2.0mm 3.0mm 1.0mm 2.0mm 3.0mm 1.0mm 2.0mm 3.0mm

Straight Snap-on Abutments

Code 6035-21 6035-22 6035-23 6043-21 6043-22 6043-23 6050-21 6050-22 6050-23 6060-21 6060-22 6060-23

Platform 3.5mmD 3.5mmD 3.5mmD 4.3mmD 4.3mmD 4.3mmD 5.0mmD 5.0mmD 5.0mmD­­­­ 6.0mmD 6.0mmD 6.0mmD

Replacement Screw 1000-23 1000-23 1000-23 1000-22 1000-22 1000-22 1000-22 1000-22 1000-22 1000-22 1000-22 1000-22

Choose the convenience of a SMART PACK or select individual components

Incl. Transfer, Comfort Cap & Dual-Grip™ Fixation Screw

Collar Heights 1.0mm 2.0mm 3.0mm 1.0mm 2.0mm 3.0mm 1.0mm 2.0mm 3.0mm 1.0mm 2.0mm 3.0mm

Use Analog 3037 3037 3037 3047 3047 3047 3057 3057 3057 3065 3065 3065

Replacement Screw 1000-23 1000-23 1000-23 1000-22 1000-22 1000-22 1000-22 1000-22 1000-22 1000-22 1000-22 1000-22

6035-21

6043-21

6050-21

6060-21

6035-22

6043-22

6050-22

6060-22

6035-23

6043-23

6050-23

6060-23

15


Components for Snap-on Abutments Transfers for Straight Snap-on Abutments

Code 3037-02 3047-02 3057-02 3065-02

Abutment Width 3.7mmD 4.7mmD 5.7mmD 6.5mmD

Pack of 2 Pack of 2 Pack of 2 Pack of 2

3037-02

3047-02

3057-02

3065-02

Comfort Caps for Straight Snap-on Abutments

Code 3037-26 3047-26 3057-26 3065-26

Abutment Width 3.7mmD 4.7mmD 5.7mmD 6.5mmD

Analogs for Straight Snap-on Abutments

Code 3037 3047 3057 3065

Pack of 2 Pack of 2 Pack of 2 Pack of 2

3037-26

3047-26

3057-26

3065-26

3037

3047

3057

3065

3037-28

3047-28

3057-28

3065-28

Incl. Castable Coping

Abutment Width 3.7mmD 4.7mmD 5.7mmD 6.5mmD

Castable Copings for Straight Snap-on Abutments

Code 3037-28 3047-28 3057-28 3065-28

16

Abutment Width 3.7mmD 4.7mmD 5.7mmD 6.5mmD

Pack of 2 Pack of 2 Pack of 2 Pack of 2


Contoured Titanium and Zirconia Abutments Straight Titanium Contoured Abutments

Code 6035-31 6035-32 6043-31 6043-32 6050-31 6050-32 6060-31 6060-32

Platform 3.5mmD 3.5mmD 4.3mmD 4.3mmD 5.0mmD 5.0mmD 6.0mmD 6.0mmD

Collar Heights 1.0mm 2.0mm 1.0mm 2.0mm 1.0mm 2.0mm 1.0mm 2.0mm

Angled Titanium Contoured Abutments

Code 6035-51 6035-52 6043-51 6043-52 6050-51 6050-52 6060-51 6060-52

Platform 3.5mmD 3.5mmD 4.3mmD 4.3mmD 5.0mmD 5.0mmD 6.0mmD 6.0mmD

Angulation 15° 15° 15° 15° 15° 15° 15° 15°

Angled Zirconia Contoured Abutments

Incl. Dual-Grip™ Fixation Screw

Replacement Screw 1000-23 1000-23 1000-22 1000-22 1000-22 1000-22 1000-22 1000-22

6035-31

6043-31

6050-31

6060-31

6035-32

6043-32

6050-32

6060-32

6035-51

6043-51

6050-51

6060-51

6035-52

6043-52

6050-52

6060-52

6035-31C

6035-51-08C

6035-51-15C

Incl. Dual-Grip™ Fixation Screw

Collar Heights 0.75mm 2.0mm 0.75mm 2.0mm 0.75mm 2.0mm 0.75mm 2.0mm

Replacement Screw 1000-23 1000-23 1000-22 1000-22 1000-22 1000-22 1000-22 1000-22

Incl. Dual-Grip™ Fixation Screw

Code 6035-31C 6035-32C 6035-51-08C 6035-52-08C 6035-51-15C 6035-52-15C 6035-30CB

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

Angulation 0° 0° 8° 8° 15° 15° -

Collar Heights Replacement Screw 1.0mm 1000-23 2.0mm 1000-23 1.0mm 1000-23 2.0mm 1000-23 1.0mm 1000-23 2.0mm 1000-23 0.5mm 1000-23

Code 6043-31C 6043-32C 6043-51-08C 6043-52-08C 6043-51-15C 6043-52-15C 6043-30CB

Platform 4.3mmD 4.3mmD 4.3mmD 4.3mmD 4.3mmD 4.3mmD 4.3mmD

Angulation 0° 0° 8° 8° 15° 15° -

Collar Heights Replacement Screw 1000-22 1.0mm 1000-22 2.0mm 1000-22 1.0mm 1000-22 2.0mm 1000-22 1.0mm 1000-22 2.0mm 1000-22 0.5mm

Code 6050-31C 6050-32C 6050-51-08C 6050-52-08C 6050-51-15C 6050-52-15C 6050-30CB

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD

Angulation 0° 0° 8° 8° 15° 15° -

Collar Heights Replacement Screw 1.0mm 1000-22 2.0mm 1000-22 1.0mm 1000-22 2.0mm 1000-22 1.0mm 1000-22 2.0mm 1000-22 0.5mm 1000-22

6035-30CB

6035-32C

6035-52-08C

6035-52-15C

6043-31C

6043-51-08C

6043-51-15C

6043-30CB 6043-32C

6043-52-08C

6043-52-15C

6050-31C

6050-51-08C

6050-51-15C

6050-30CB

6050-32C

6050-52-08C

6050-52-15C

17


Titanium and Lab Abutments Straight Contoured Abutments with 30, 60 & 90­­Degree offset Tri-Lobe

Code 6035-32-30 6035-32-60 6035-32-90 6043-32-30 6043-32-60 6043-32-90 6050-32-30 6050-32-60 6050-32-90 6060-32-30 6060-32-60 6060-32-90

Collar Heights 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm

Incl. Dual-Grip™ Fixation Screw

Platform 3.5mmD 3.5mmD 3.5mmD 4.3mmD 4.3mmD 4.3mmD 5.0mmD 5.0mmD 5.0mmD 6.0mmD 6.0mmD 6.0mmD

Replacement Screw 1000-23 1000-23 1000-23 1000-22 1000-22 1000-22 1000-22 1000-22 1000-22 1000-22 1000-22 1000-22

Angled Contoured Abutments with 30, 60 & 90­­Degree offset Tri-Lobe

Code 6035-52-30 6035-52-60 6035-52-90 6043-52-30 6043-52-60 6043-52-90 6050-52-30 6050-52-60 6050-52-90

Collar Heights 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm

Fixation Screws

Code 1000-23 1000-28 1000-12 1000-22 1000-22L 1000-27 1000-11

18

Collar Heights -

6035-32-30

6043-32-30

6050-32-30

6060-32-30

6035-32-60

6043-32-60

6050-32-60

6060-32-60

6035-32-90

6043-32-90

6050-32-90

6060-32-90

Incl. Dual-Grip™ Fixation Screw

Angulation 15° 15° 15° 15° 15° 15° 15° 15° 15°

Platform 3.5mmD 3.5mmD 3.5mmD 4.3mmD 4.3mmD 4.3mmD 5.0mmD 5.0mmD 5.0mmD

Straight Full Contour Abutments

Code 6035-30L 6043-30L 6050-30L 6060-30L

Tri-Lobe 30° 60° 90° 30° 60° 90° 30° 60° 90° 30° 60° 90°

Replacement Screw 1000-23 1000-23 1000-23 1000-22 1000-22 1000-22 1000-22 1000-22 1000-22

Tri-Lobe 30° 60° 90° 30° 60° 90° 30° 60° 90°

6035-52-30

6043-52-30

6050-52-30

6035-52-60

6043-52-60

6050-52-60

6035-52-90

6043-52-90

6050-52-90

Incl. Dual-Grip™ Fixation Screw

Platform 3.5mmD 4.3mmD 5.0mmD 6.0mmD

Replacement Screw 1000-23 1000-22 1000-22 1000-22

6035-30L

6043-30L

6050-30L

6060-30L

Components include Dual-Grip™ feature for use with 1.25mmD Hex Tool or Nobel Unigrip Screwdriver

Platform 3.5mmD, Short – Pack of 2 3.5mmD, Long – Pack of 2 3.5mmD – Pack of 2 4.3, 5.0 and 6.0mmD, Short – Pack of 2 4.3, 5.0 and 6.0mmD – Pack of 4 4.3, 5.0 and 6.0mmD, Long – Pack of 2 4.3, 5.0 and 6.0mmD – Pack of 2

1000-23 1000-28 1000-12

1000-22 1000-22L 1000-27 1000-11


Prosthetic Technique: Insertion of Abutments with Tri-Lobe Offset

Implant with tri-lobe aligned to labial. Rotate transfer and seat mating tri-lobes.

0 degrees offset

1. Tri-Lobe aligned perpendicular to labial. (0 degrees offset)

2. Dimple of Alignment Tool is perpendicular to labial: 0 degree offset of implant tri-lobe.

3. Use 0 degree tri-lobe offset Contoured Abutment when tool is inserted as above.

Make transfer impression using vinyl polysiloxane material.

30 degrees offset

Attach transfer to matching colored implant analog. Insert transfer and pour impression.

60 degrees offset

Evaluate rotational position of tri-lobe for selection of straight and Angled contoured abutments

90 degrees offset

1. Tri-Lobe aligned 30 degrees counter-clockwise to line perpendicular to labial.

1. Tri-Lobe aligned 60 degrees counter-clockwise to line perpendicular to labial.

1. Tri-Lobe aligned 90 degrees counter-clockwise to line perpendicular to labial.

2. Dimple on the tool is 1 facet (30 degrees) counter-clockwise to line perpendicular to labial.

2. Dimple on the tool is 2 facets (60 degrees) counter-clockwise to line perpendicular to labial.

2. Dimple on the tool is 3 facets (90 degrees) counter-clockwise to line perpendicular to labial.

3. Use 30 degree tri-lobe offset Contoured Abutment when tool is inserted as above.

3. Use 60 degree tri-lobe offset Contoured Abutment when tool is inserted as above.

3. Use 90 degree tri-lobe offset Contoured Abutment when tool is inserted as above.

19


Gold, Plastic, Titanium Abutments and Scan Adapters Gold Engaging Cast-to Abutments

Code 6035-40 6043-40 6050-40

Collar Heights 1.0mm 1.0mm 1.0mm

Incl. Dual-Grip™ Fixation Screw

Platform 3.5mmD 4.3mmD 5.0mmD

Gold Non-Engaging Cast-to Abutments

Code 6035-41 6043-41 6050-41

Collar Heights 1.0mm 1.0mm 1.0mm

Collar Heights -

Platform 3.5mmD 4.3mmD 5.0mmD

Platform 3.5mmD 4.3mmD 5.0mmD 6.0mmD

Plastic Engaging Temporary Abutments

Code 6035-47 6043-47 6050-47 6060-47

Collar Heights -

6035-40

6043-40

6050-40

Incl. Dual-Grip™ Fixation Screw

Plastic Non-Engaging Castable Abutments

Code 6035-46 6043-46 6050-46 6060-46

Replacement Screw 1000-23 1000-22 1000-22

Platform 3.5mmD 4.3mmD 5.0mmD 6.0mmD

Replacement Screw 1000-23 1000-22 1000-22

6035-41

6043-41

6050-41

Incl. Dual-Grip™ Fixation Screw

Replacement Screw 1000-23 1000-22 1000-22 1000-22

6035-46

6043-46

6050-46

6060-46

6035-47

6043-47

6050-47

6060-47

6043-09P

6050-09P

6060-09P

Incl. Dual-Grip™ Fixation Screw

Replacement Screw 1000-28 1000-27 1000-27 1000-27

PEEK Scan Adapters, Single-Use Incl. Dual-Grip™ Fixation Screw. {For use with Implant Direct Design Library}

Code 6035-09P 6043-09P 6050-09P 6060-09P

Collar Heights -

Platform 3.5mmD 4.3mmD 5.0mmD 6.0mmD

Replacement Screw 1000-23 1000-22 1000-22 1000-22

6035-09P

PEEK/Titanium Scan Adapters, Single-Use* Coming soon - please ask for availability Incl. Tri-Grip™ Fixation Screw. {For use with Implant Direct Design Library}

Code 6035-09PT 6043-09PT 6050-09PT 6060-09PT

Collar Heights -

Platform 3.5mmD 4.3mmD 5.0mmD 6.0mmD

Replacement Screw 1000-23B 1000-22B 1000-22B 1000-22B

6035-09PT

6043-09PT

6050-09PT

6035-49

6043-49

6050-49

6060-09PT

* Multi-Use acceptable when used in laboratory only.

Titanium Non-Engaging Temporary Abutments

Code 6035-49 6043-49 6050-49 6060-49

20

Collar Heights -

Platform 3.5mmD 4.3mmD 5.0mmD 6.0mmD

Incl. Dual-Grip™ Fixation Screw

Replacement Screw 1000-23 1000-22 1000-22 1000-22

6060-49


SMARTbase CAD/CAM

New

Engaging Dual Hue Titanium Base

Code 6035-80 6035-82 6043-80 6043-82 6050-80 6050-82 6060-80 6060-82

Platform 3.5mmD 3.5mmD 4.3mmD 4.3mmD 5.0mmD 5.0mmD 6.0mmD 6.0mmD

Collar Heights 0.0mm 2.0mm 0.0mm 2.0mm 0.0mm 2.0mm 0.0mm 2.0mm

incl. Fixation Screw and Coping

Width 3.8mmD 3.8mmD 4.8mmD 4.8mmD 5.7mmD 5.7mmD 6.3mmD 6.3mmD

Non-Engaging Dual Hue Titanium Base

Code 6035-80NE 6035-82NE 6043-80NE 6043-82NE 6050-80NE 6050-82NE 6060-80NE 6060-82NE

Platform 3.5mmD 3.5mmD 4.3mmD 4.3mmD 5.0mmD 5.0mmD 6.0mmD 6.0mmD

Collar Heights 0.0mm 2.0mm 0.0mm 2.0mm 0.0mm 2.0mm 0.0mm 2.0mm

Replacement Screw 1000-23B 1000-23B 1000-22B 1000-22B 1000-22B 1000-22B 1000-22B 1000-22B

Digital & Conventional Use

6035-80

6043-80

6050-80

6060-80

6035-82

6043-82

6050-82

6060-82

incl. Fixation Screw and Coping

Width 3.8mmD 3.8mmD 4.8mmD 4.8mmD 5.7mmD 5.7mmD 6.3mmD 6.3mmD

Replacement Screw 1000-23B 1000-23B 1000-22B 1000-22B 1000-22B 1000-22B 1000-22B 1000-22B

Digital & Conventional Use

6035-80NE 6043-80NE 6050-80NE 6060-80NE

6035-82NE 6043-82NE 6050-82NE 6060-82NE

Tri-Gripâ„¢ Fixation Screws

Code 1000-23B 1000-22B

Platform 3.5mmD 4.3, 5.0, 6.0mmD

Length 7.6mm 9.0mm

1000-23B

1000-22B

Plastic Sleeve Burn-Out Copings

Code 1000-38-28B 1000-48-28B 1000-57-28B 1000-63-28B

Width 3.8mmD 4.8mmD 5.7mmD 6.3mmD

Length 9.0mm 9.0mm 9.0mm 9.0mm

Pack of 2 Pack of 2 Pack of 2 Pack of 2

1000-38-28B

1000-48-28B

1000-57-28B

1000-63-28B

21


Selection Chart: Overdenture and Screw-Retained Restorations 3.5mmD Platform

4.3mmD Platform

6.0mmD Platform

5.0mmD Platform

Multi-Unit Abutments (*Incl. Transfer and Comfort Cap)

6035-61 6035-62 6035-64

6043-61 6043-62 6043-64

6035-64-30 6035-64-15

6050-61 6050-62 6050-64

6043-64-30 6043-64-15

6060-61 6060-62 6060-64

6050-64-30 6050-64-15

Components for Multi-Unit Abutments

*4000-13 Comfort Cap

1000-64 Gold Coping

1000-06D 3D Analog

*1000-68 Transfer

1000-65 Titanium Coping

1000-66 Plastic Coping

1000-62 Open-Tray Transfer

1000-67 Gold/Plastic Coping

1000-69BP SMARTbase Cylinder

1000-63 Closed-Tray Transfer

1000-69BG SMARTbase Cylinder

1000-09P PEEK Scan Adapter

Ball Abutments (**Incl. Transfer and Comfort Cap)

6035-72 6035-74

6043-72 6043-74

6050-72 6050-74

6060-72 6060-74

Components for Ball Abutments

**1000-87 Comfort Cap

**1000-84 Transfer

1000-85 Analog

1000-81 Ball Abutment Housing

1000-82 Nylon Liner

1000-88­­­­ Ball Abutment Housing & Nylon Liner

1000-83 Nylon Liner Transfer

1000-86 Tools

LOCATOR® Abutments 6043-90-L 6043-91-L 6043-92-L 6043-93-L 6043-94-L 6043-95-L

6035-90-L 6035-91-L 6035-92-L 6035-93-L 6035-94-L 6035-95-L

6050-91-L 6050-92-L 6050-93-L 6050-94-L 6050-95-L

Components for LOCATOR® Abutments

1000-97-L4

4500-26

22

1000-100-L4 1000-92C-L4 1000-92G-L4 1000-92R-L4 1000-92E-L4 1000-100-L20 1000-92C-L20 1000-92G-L20 1000-92R-L20 1000-92E-L20

1000-95-L4 1000-94-L4 1000-95-L20 1000-94-L20

1000-98S-L2 1000-98SI-L1 1000-91-L4 1000-92P-L4 1000-92B-L4 1000-92Z-L4 1000-93-L4 1000-98S-L10 1000-98SI-L2 1000-91-L10 1000-96-L 1000-98SI-L10 1000-92P-L20 1000-92B-L20 1000-92Z-L20 1000-93-L20

Abutments are compatible with Zimmer Biomet-Dental (Tapered Screw-Vent), BioHorizons® (internal) and MIS Implants with 3.5mmD, 4.5mmD and 5.7mmD prosthetic platforms


SMART PACKS, Multi-Unit and Ball Abutments simplyfixed SMART PACKS

Incl. Multi-Unit Abutment, Abutment Analog, Transfer, Titanium Temporary Abutment, Comfort Cap, Fixation Screw

Code 6035-62K 6035-64K 6035-64-15K 6035-64-30K 6043-62K 6043-64K 6043-64-15K 6043-64-30K 6050-61K 6050-62K 6050-64-15K 6050-64-30K

Collar Heights 2.0mm 4.0mm 4.0mm 4.0mm 2.0mm 4.0mm 4.0mm 4.0mm 1.0mm 2.0mm 4.0mm 4.0mm

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 4.3mmD 4.3mmD 4.3mmD 4.3mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD

Multi-Unit Abutments

Platform 3.5mmD 4.3mmD 5.0mmD 6.0mmD

Multi-Unit Angled Abutments

Angle 15° 15° 15° 30° 30° 30°

Ball Abutments

Code 6035-72 6035-74 6043-72 6043-74 6050-72 6050-74 6060-72 6060-74

2.0mmL 6035-62 6043-62 6050-62 6060-62

4.0mmL 6035-64 6043-64 6050-64 6060-64

6035-61 6035-62 6035-64

6043-61 6043-62 6043-64

6050-61 6050-62 6050-64

6060-61 6060-62 6060-64

Incl. Dual-Grip™ Abutment Screw, Transfer & Comfort Cap [Screw Top requires 2.5mmD Hex Tool]

Platform 3.5mmD 4.3mmD 5.0mmD 3.5mmD 4.3mmD 5.0mmD

6035-64-15

6043-64-15

6050-64-15

6035-64-30

6043-64-30

6050-64-30

Incl. Transfer & Comfort Cap [Requires 1.25mmD Hex Tool]

Collar Heights 2.0mm 4.0mm 2.0mm 4.0mm 2.0mm 4.0mm 2.0mm 4.0mm

Replacement Top for Angled Abutments

Code 1000-60 1000-70

Choose the convenience of a SMART PACK or select individual components

Incl. Transfer & Comfort Cap [Requires 1.25mmD Hex Tool]

1.0mmL 6035-61 6043-61 6050-61 6060-61

Code 6035-64-15 6043-64-15 6050-64-15 6035-64-30 6043-64-30 6050-64-30

Angulation 0° 0° 15° 30° 0° 0° 15° 30° 0° 0° 15° 30°

Platform 3.5mmD 3.5mmD 4.3mmD 4.3mmD 5.0mmD 5.0mmD 6.0mmD 6.0mmD

6035-72

6043-72

6050-72

6060-72

6035-74

6043-74

6050-74

6060-74

Incl. Transfer & Comfort Cap

Description Replacement Screw Top for Angled Base [Requires 2.5mmD Hex Tool] Replacement Ball Top for Angled Base [Requires 1.25mmD Hex Tool]

1000-60

1000-70

23


Components for Overdenture and Screw-Retained Restorations

Components for Multi-Unit Abutments

Code 1000-06D 1000-62 1000-63 1000-68 4000-13 1000-14 1000-15

Code 1000-64 1000-65 1000-66 1000-67 1000-09P 1000-69BP 1000-69BG 1000-05 1000-25 1000-25B

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD -

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD -

Screws require 1.25mmD Hex Tool­­­

Description New 3D Analog Open-Tray Transfer incl. Fixation Screw Closed-Tray Transfer incl. Fixation Screw Plastic Abutment Transfer – Pack of 2 Plastic Comfort Cap – Pack of 2 Open-Tray Fixation Screw, Long – Pack of 2 Closed-Tray Fixation Screw, Short – Pack of 2

Description Gold Coping Titanium Coping Plastic Coping Gold & Plastic Coping PEEK Scan Adapter SMARTbase Cylinder Pink SMARTbase Cylinder Gold Coping Fixation Screw – Pack of 2 Dual-Grip™ Fixation Screw – Pack of 2 Tri-Grip™ Fixation Screw for SMARTbase Cylinder

1000-06D

1000-62

1000-63

1000-68

Incl. Fixation Screw [1000-05], optional D ­­­ ual-Grip™ Fixation Screw [1000-25]

4000-13

[1000-25B]

1000-05

New New

1000-25

New 1000-64 1000-65 1000-66 1000-67 1000-09P 1000-69BP1000-69BG

New

Components for Ball Abutments

Code 1000-81 1000-82 1000-83 1000-84 1000-85 1000-86 1000-87 1000-88

Description Housing – Pack of 2 Nylon Liner – Pack of 2 Nylon Liner Transfer – Pack of 2 Transfer – Pack of 2 Analog Tools Comfort Cap – Pack of 2 Housing & Nylon Liner

1000-81

1000-82

1000-83

1000-84

1000-85

1000-86

1000-87

1000-88

Components for LOCATOR® Abutments

Code 1000-94-L4 1000-94-L20 1000-95-L4 1000-95-L20 1000-97-L4 4500-26 1000-96-L 1000-99-L

24

Description Impression Coping - Pack of 4 Impression Coping - Pack of 20 Abutment Analog 4.0mmD - Pack of 4 Abutment Analog 4.0mmD - Pack of 20 Abutment Parallel Post - Pack of 4 Comfort Cap - Pack of 2 LOCATOR® Core Tool Angle Measure Guide

1000-94-L4 1000-94-L20

1000-96-L

1000-95-L4 1000-95-L20

1000-97-L4

4500-26

1000-99-L


LOCATOR® Abutments and Components

LOCATOR® Abutments

Code 6035-90-L 6035-91-L 6035-92-L 6035-93-L 6035-94-L 6035-95-L 6043-90-L 6043-91-L 6043-92-L 6043-93-L 6043-94-L 6043-95-L 6050-91-L 6050-92-L 6050-93-L 6050-94-L 6050-95-L

Require LOCATOR® Core Tool

Collar Heights 0.0mm 1.0mm 2.0mm 3.0mm 4.0mm 5.0mm 0.0mm 1.0mm 2.0mm 3.0mm 4.0mm 5.0mm 1.0mm 2.0mm 3.0mm 4.0mm 5.0mm

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 4.3mmD 4.3mmD 4.3mmD 4.3mmD 4.3mmD 4.3mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD

6035-90-L

6035-91-L

6035-92-L

6035-93-L

6035-94-L

6035-95-L

6043-90-L

6043-91-L

6043-92-L

6043-93-L

6043-94-L 6043-95-L

6050-91-L

6050-92-L

6050-93-L

6050-94-L

6050-95-L

Components for LOCATOR® Abutments

Retention 0.68 kg 1.36 kg 2.27 kg 0.00 kg 0.23-0.68 kg 0.91 kg 1.36-1.82 kg -

Description Male Blue (up to 20°) Male Pink (up to 20°) Male Clear (up to 20°) Male Gray (up to 40°) Male Red (up to 40°) Male Orange (up to 40°) Male Green (up to 40°) Processing Male Black

Pack of 4 1000-92B-L4 1000-92P-L4 1000-92C-L4 1000-92Z-L4 1000-92R-L4 1000-92E-L4 1000-92G-L4 1000-93-L4

Pack of 20 1000-92B-L20 1000-92P-L20 1000-92C-L20 1000-92Z-L20 1000-92R-L20 1000-92E-L20 1000-92G-L20 1000-93-L20

Retention -

Description Processing Spacer

Pack of 4 1000-100-L4

Pack of 20 1000-100-L20

Retention -

Description Metal Cap + Processing Male Black

Pack of 4 1000-91-L4

Pack of 10 1000-91-L10

Retention Assorted Assorted

Description Male Processing Package (up to 20°) Male Processing Package (up to 40°)

Pack of 10 Pack of 2 Pack of 1 1000-98SI-L1 1000-98SI-L2 1000-98SI-L10 1000-98S-L2 1000-98S-L10

1000-92B-L4 1000-92B-L20

1000-92R-L4 1000-92R-L20

1000-92P-L4 1000-92P-L20

1000-92E-L4 1000-92E-L20

1000-92C-L4 1000-92C-L20

1000-92G-L4 1000-92G-L20

1000-92Z-L4 1000-92Z-L20

1000-91-L4 1000-91-L10

1000-98SI-L1 1000-98SI-L2 1000-98SI-L10

1000-93-L4 1000-93-L20

1000-100-L4 1000-100-L20

1000-98S-L2 1000-98S-L10

25


Surgical and Prosthetic Instruments Tapered Hex Tools

Manual

Code THT1.25 THT1.25S

Description 1.25mmD Tapered Hex Tool 1.25mmD Tapered Hex Tool, Short

Straight Hex and Insertion Tools

Code HT1.25L HT1.25 HT1.25S HT1.3LB HT1.3B HT1.3SB HT2.0 HT2.0S HT2.0LG HT2.0SG HT2.5 HT2.5S HT2.5LG HT2.5SG HT3.0 HT3.0S HT3.0LG HT3.0SG

Description 1.25mmD Straight Hex Tool, Long 1.25mmD Straight Hex Tool 1.25mmD Straight Hex Tool, Short 1.3mmD Off-Axis Hex Tool, Long 1.3mmD Off-Axis Hex Tool 1.3mmD Off-Axis Hex Tool, Short 2.0mmD Hex Insertion Tool (Retentive 0-Ring) 2.0mmD Hex Insertion Tool, Short (Retentive 0-Ring) 2.0mmD Hex Insertion Tool, Long (Retentive Metal 0-Ring) 2.0mmD Hex Insertion Tool, Short (Retentive Metal 0-Ring) 2.5mmD Hex Insertion Tool (Retentive 0-Ring) 2.5mmD Hex Insertion Tool, Short (Retentive 0-Ring) 2.5mmD Hex Insertion Tool, Long (Retentive Metal 0-Ring) 2.5mmD Hex Insertion Tool, Short (Retentive Metal 0-Ring) 3.0mmD Hex Insertion Tool (Retentive 0-Ring) 3.0mmD Hex Insertion Tool, Short (Retentive 0-Ring) 3.0mmD Hex Insertion Tool, Long (Retentive Metal 0-Ring) 3.0mmD Hex Insertion Tool, Short (Retentive Metal 0-Ring)

Hex and Insertion Tools

Code HD1.25 HD1.3B HD2.0 HD2.0SG HD2.5 HD2.5SG HD3.0 HD3.0SG

26

Description 1.25mmD Hex Tool 1.3mmD Off-Axis Hex Tool 2.0mmD Hex Insertion Tool (Retentive 0-Ring) 2.0mmD Hex Insertion Tool, Short (Retentive Metal 0-Ring) 2.5mmD Hex Insertion Tool (Retentive 0-Ring) 2.5mmD Hex Insertion Tool, Short (Retentive Metal 0-Ring) 3.0mmD Hex Insertion Tool (Retentive 0-Ring) 3.0mmD Hex Insertion Tool, Short (Retentive Metal 0-Ring)

THT1.25

THT1.25S

Ratchet or Torque Wrench

HT1.25S

HT1.25L

HT1.25

HT1.3LB

HT1.3B

New New New

New

HT1.3SB

New

New New

HT2.0LG

HT2.0SG

HT2.0

HT2.0S

HT2.5

HT2.5S

HT2.5LG

HT2.5SG

HT3.0

HT3.0S

HT3.0LG

HT3.0SG

New New

Handpiece/Surgical Motor

New New

HD1.25

HD1.3B

HD2.0

HD2.0SG

HD2.5

HD2.5SG

HD3.0

HD3.0SG

New New


Surgical and Prosthetic Instruments Ancillary Instruments

Code R TW30 TW35 SSHM FMD RB-06 PAR LDRILL DE TWM TW ABH LDD LDDS LDT LDTS 1000-96-L DAP

Description Surgical Ratchet 30Ncm Torque Wrench 35Ncm Torque Wrench Universal Stainless Steel Handle (with 4.0mm square connection) Fixture-Mount Drill Round Burr 0.6mmD Paralleling Tool 2.3/2.8mmD LOCATOR® Drill Drill Extender Multi-Setting Torque Wrench (15, 20, 25, 30, 35, 40, 45, 50 & 60Ncm) Spring Steel Torque Wrench (Torque range 0 - 90 N/cm) Analog Holder LOCATOR® Driver 29.0mm, Handpiece LOCATOR® Driver 23.0mm, Handpiece LOCATOR® Square Driver 21.0mm, Wrench LOCATOR® Square Driver 15.0mm, Wrench LOCATOR® Core Tool Off-Axis Driver Access Plug

New

TW30

R

TW35

SSHM

TWM

TW

New

New FMD

PAR

RB-06

LDRILL

DE

ABH

New

LDD -LDDS

LDT- LDTS

1000-96-L

DAP

Surgical Trays

Code ST BST CST RST RBST RCST Grommets

Code SKG- S SKG- M SKG- L

Description Empty Surgical Tray for RePlus® & ReActiveTM System Implants Basic Surgical Tray for RePlus® & ReActiveTM System Implants Surgical Tray for RePlus® & ReActiveTM System Implants Empty Surgical Tray for RePlant® System Implants Basic Surgical Tray for RePlant® System Implants Surgical Tray for RePlant® System Implants

ST

BST

CST

RST

RBST

RCST

SKG-S

SKG-M

SKG-L

Grommets to insert tools in surgical trays.

Description Replacement Grommet, Small Replacement Grommet, Medium Grommet for New Hex Insertion Tools, Large

New New New

27


RePlus速 / ReActiveTM: Surgical Drills Pilot Drills

Code SD2.3 SD2.3S SD2.8 SD2.8S

SD2.3

28

CBD3.7

SD3.8

SD3.8S

CBD4.2

SD4.4

SD4.4S

CBD4.7

SD4.8

S足足足 D4.8S

D5.1S

SD5.4

Description 4.4/4.8mmD Step Drill with 6-16 Markings 4.4/4.8mmD Step Drill with 6-10 Markings

5.7mmD Implants

Code D5.1 D5.1S SD5.4 SD5.4S CBD5.7

SD3.4S

Description 3.8/4.4mmD Step Drill with 6-16 Markings 3.8/4.4mmD Step Drill with 6-10 Markings Cortical Bone Drill for 4.7mmD Implants

Optional Drills

Code SD4.8 SD4.8S

SD3.4

Description 3.4/3.8mmD Step Drill with 6-16 Markings 3.4/3.8mmD Step Drill with 6-10 Markings Cortical Bone Drill for 4.2mmD Implants

4.7mmD Implants

Code SD4.4 SD4.4S CBD4.7

SD2.8S

Description 2.8/3.4mmD Step Drill with 6-16 Markings 2.8/3.4mmD Step Drill with 6-10 Markings Cortical Bone Drill for 3.7mmD Implants

4.2mmD Implants

Code SD3.8 SD3.8S CBD4.2

SD2.8

Description 2.0/2.3mmD Step Drill with 6-16 Markings 2.0/2.3mmD Step Drill with 6-10 Markings 2.3/2.8mmD Step Drill with 6-16 Markings 2.3/2.8mmD Step Drill with 6-10 Markings

3.7mmD Implants

Code SD3.4 SD3.4S CBD3.7

SD2.3S

D5.1

Description 5.1mmD Straight Drill with 6-16 Markings 5.1mmD Straight Drill with 6-10 Markings 4.8/5.4mmD Step Drill with 6-16 Markings 4.8/5.4mmD Step Drill with 6-10 Markings Cortical Bone Drill for 5.7mmD Implants

SD5.4S

CBD5.7


RePlus® / ReActiveTM: Drill Sequence 3.7mmD RePlus® & ReActiveTM Tapered Implant Soft Bone Final

SD2.8

SD2.3

2.3/2.8mmD

2.0/2.3mmD

Dense Bone Final

Optional Cortical Bone Drill

SD3.4

CBD3.7

Dense Bone Final

Optional Cortical Bone Drill

2.8/3.4mmD

4.2mmD RePlus® & ReActiveTM Tapered Implant Optional

SD2.3

2.0/2.3mmD

Soft Bone Final

3.4/3.8mmD

SD3.8

CBD4.2

2.8/3.4mmD

Soft Bone Final

Dense Bone Final

Optional Cortical Bone Drill

SD4.4

CBD4.7

Dense Bone Final

Optional Cortical Bone Drill

SD5.4

CBD5.7

SD3.4

SD2.8

2.3/2.8mmD

4.7mmD RePlus® & ReActiveTM Tapered Implant Optional

SD2.3

2.0/2.3mmD

SD2.8

2.3/2.8mmD

SD3.4

SD3.8

2.8/3.4mmD

3.4/3.8mmD

3.8/4.4mmD

5.7mmD RePlus® & ReActiveTM Tapered Implant Optional

SD2.3

2.0/2.3mmD

SD2.8

2.3/2.8mmD

Optional

SD3.4

2.8/3.4mmD

SD3.8

3.4/3.8mmD

Optional

SD4.4

3.8/4.4mmD

SD4.8

4.4/4.8mmD

Soft Bone Final

D5.1

5.1mmD

4.8/5.4mmD

29


RePlus® / ReActive™: Surgical Tray

SD2.8

SD2.8S

CBD3.2

SD3.4

SD3.4S

CBD3.7

SD3.8

SD3.8S

CBD4.2

SD4.4

SD4.4S

CBD4.7

SD4.8

SD4.8S

CBD5.2

D5.1

D5.1S

SD5.4

SD5.4S

SD2.3 SD2.3S

Optional place for InterActive tools (not included)

THT1.25

HT1.25

HT2.0

HT2.5

HT3.0

THT1.25S

HT1.25S

HT2.0S

HT2.5S

HT3.0S

CBD5.7

lower level of surgical tray

LDRILL

DE

R

FMD

30

HD1.25

HD2.0

HD2.5

HD3.0

SSHM

PAR (4)


ReActiveTM/RePlus®: Surgical Tray

Lid

Code ST SD2.3 SD2.3S SD2.8 SD2.8S CBD3.2 SD3.4 SD3.4S CBD3.7 SD3.8 SD3.8S CBD4.2 SD4.4 SD4.4S CBD4.7 SD4.8 SD4.8S CBD5.2 D5.1 D5.1S SD5.4 SD5.4S CBD5.7 THT1.25 THT1.25S HT1.25 HT1.25S HT2.0 HT2.0S HT2.5 HT2.5S HT3.0 HT3.0S HD1.25 HD2.0 HD2.5 HD3.0 FMD LDRILL DE R PAR (x4) SSHM

Empty Tray

Inside

Surgical Tray Contents Description Empty Surgical Tray 2.0/2.3mmD Step Drill, 6-16 Markings 2.0/2.3mmD Step Drill, 6-10 Markings 2.3/2.8mmD Step Drill, 6-16 Markings 2.3/2.8mmD Step Drill, 6-10 Markings Cortical Bone Drill for 3.0 and 3.2mmD Implants 2.8/3.4mmD Step Drill, 6-16 Markings 2.8/3.4mmD Step Drill, 6-10 Markings Cortical Bone Drill for 3.7mmD Implants 3.4/3.8mmD Step Drill, 6-16 Markings 3.4/3.8mmD Step Drill, 6-10 Markings Cortical Bone Drill for 4.2mmD Implants 3.8/4.4mmD Step Drill, 6-16 Markings 3.8/4.4mmD Step Drill, 6-10 Markings Cortical Bone Drill for 4.7mmD Implants 4.4/4.8mmD Step Drill, 6-16 Markings 4.4/4.8mmD Step Drill, 6-10 Markings Cortical Bone Drill for 5.2mmD Implants 5.1mmD Straight Drill, 6-16 Markings 5.1mmD Straight Drill, 6-10 Markings 4.8/5.4mmD Step Drill, 6-16 Markings 4.8/5.4mmD Step Drill, 6-10 Markings Cortical Bone Drill for 5.7mmD Implants Hex and Insertion Tools 1.25mmD Tapered Hex Tool, Manual 1.25mmD Tapered Hex Tool Short, Manual 1.25mmD Straight Hex Tool, Ratchet 1.25mmD Straight Hex Tool Short, Ratchet 2.0mmD Hex Insertion Tool, Ratchet 2.0mmD Hex Insertion Tool Short, Ratchet 2.5mmD Hex Insertion Tool, Ratchet 2.5mmD Hex Insertion Tool Short, Ratchet 3.0mmD Hex Insertion Tool, Ratchet 3.0mmD Hex Insertion Tool Short, Ratchet 1.25mmD Hex Tool, Handpiece 2.0mmD Hex Insertion Tool, Handpiece 2.5mmD Hex Insertion Tool, Handpiece 3.0mmD Hex Insertion Tool, Handpiece Ancillary Instrumentation Fixture-Mount Drill LOCATOR® Drill Drill Extender Surgical Ratchet Paralleling Tool 2.3/2.8mmD Universal Stainless Steel Handle

Complete Tray

Basic Tray

X X X X X X X X X X X X X X X X X X X X X X X

X X

X X X X X X X X X X X X X X

X

X X X X X X

X X X X X X X

X X X X X X

X X X X

31


RePlant®: Surgical Drills

SD2.3

Pilot Drills for All Implants

Code SD2.3 SD2.3S

Description 2.0/2.3mmD Step Drill with 6-16 Markings 2.0/2.3mmD Step Drill with 6-10 Markings

Soft Bone Drills

Code RSB3 RSB3S RSB4 RSB4S RSB5 RSB5S RSB6 RSB6S

Description 2.3/2.8mmD Step Drill for 3.5mmD Implant 2.3/2.8mmD Short Step Drill for 3.5mmD Implant 2.8/3.4mmD Step Drill for 4.3mmD Implant 2.8/3.4mmD Short Step Drill for 4.3mmD Implant 4.2/3.3mmD Step Drill for 5.0mmD Implant 4.2/3.3mmD Short Step Drill for 5.0mmD Implant 5.1/4.2mmD Step Drill for 6.0mmD Implant 5.1/4.2mmD Short Step Drill for 6.0mmD Implant

Dense Bone Drills

Code RDB3 RDB4 RDB5 RDB6

32

SD2.3S

Description 3.2mmD Dense Bone Drill for 3.5mmD Implant 4.0mmD Dense Bone Drill for 4.3mmD Implant 4.7mmD Dense Bone Drill for 5.0mmD Implant 5.7mmD Dense Bone Drill for 6.0mmD Implant

RSB3

RSB3S

RSB4

RSB4S

RSB5

RSB5S

RSB6

RSB6S

RDB3

RDB4

RDB5

RDB6


RePlant®: Surgical Drills

RePlant® Insertion Tools

Code RTT3 RTT3SG RTT3LG RTT4 RTT4SG RTT4LG RTT5 RTT5SG RTT5LG RTT6 RTT6SG RTT6LG

RePlant® Insertion Tools

Code RTD3 RTD3SG RTD4 RTD4SG RTD5 RTD5SG RTD6 RTD6SG

Ratchet or Torque Wrench

Description Tri-Lobe Insertion Tool for 3.5mmD Implant Tri-Lobe Insertion Tool for 3.5mmD Implant, Short Tri-Lobe Insertion Tool for 3.5mmD Implant, Long Tri-Lobe Insertion Tool for 4.3mmD Implant Tri-Lobe Insertion Tool for 4.3mmD Implant, Short Tri-Lobe Insertion Tool for 4.3mmD Implant, Long Tri-Lobe Insertion Tool for 5.0mmD Implant Tri-Lobe Insertion Tool for 5.0mmD Implant, Short Tri-Lobe Insertion Tool for 5.0mmD Implant, Long Tri-Lobe Insertion Tool for 6.0mmD Implant Tri-Lobe Insertion Tool for 6.0mmD Implant, Short Tri-Lobe Insertion Tool for 6.0mmD Implant, Long

RTT3SG

RTT3LG

RTT4

RTT4SG

RTT4LG

RTT5

RTT5SG

RTT5LG

RTT6

RTT6SG

RTT6LG

New New New New New New New New

Handpiece/Surgical Motor

Description Tri-Lobe Insertion Toll for 3.5mmD Implant Tri-Lobe Insertion Toll for 3.5mmD Implant, Short Tri-Lobe Insertion Toll for 4.3mmD Implant Tri-Lobe Insertion Toll for 4.3mmD Implant, Short Tri-Lobe Insertion Toll for 5.0mmD Implant Tri-Lobe Insertion Toll for 5.0mmD Implant, Short Tri-Lobe Insertion Toll for 6.0mmD Implant Tri-Lobe Insertion Toll for 6.0mmD Implant, Short

RTT3

RTD3

RTD3SG

RTD4

RTD4SG

RTD5

RTD5SG

RTD6

RTD6SG

New New New New

33


RePlant®: Drill Sequence 3.5mmD RePlant® Straight / Tapered Implant Soft Bone Final

RSB3

SD2.3

2.0/2.3mmD

Dense Bone Final

RDB3

2.3/2.8mmD

3.2mmD

Soft Bone Final

Dense Bone Final

4.3mmD Straight / Tapered Implant Optional

SD2.3

2.0/2.3mmD

RSB4

RSB3

RDB4

2.3/2.8mmD

2.8/3.4mmD

4.0mmD

Optional

Soft Bone Final

Dense Bone Final

5.0mmD Straight / Tapered Implant

SD2.3

2.0/2.3mmD

RSB3

2.3/2.8mmD

RSB5

RSB4

2.8/3.4mmD

RDB5

4.2/3.3mmD

4.7mmD

Soft Bone Final

Dense Bone Final

6.0mmD Straight / Tapered Implant Optional

SD2.3

2.0/2.3mmD

34

RSB3

2.3/2.8mmD

RSB4

2.8/3.4mmD

RSB5

4.2/3.3mmD

RSB6

5.1/4.2mmD

RDB6

5.7mmD


RePlant®: Surgical Tray

SD2.3 SD2.3S

THT1.25

RSB3

RSB3S

RDB3

RSB4

RSB4S RDB4

RSB5

RSB5S RDB5

RSB6

RSB6S RDB6

HT1.25

THT1.25S HT1.25S LDRILL

FMD

HD1.25

DE

PAR (4)

HT2.5

lower level of surgical tray HT2.5S

RTT3

RTT4

RTT5

RTT6

R

HD2.5

RTD3

RTD4

RTD5

RTD6 SSHM

35


RePlant®: Surgical Tray

Lid Surgical Tray Contents

36

Empty Tray

Inside Complete Tray

Basic Tray

Code

Description

RST

Empty Surgical Tray

X

X

SD­­­2.3

2.0/2.3mmD Step Drill-Long

X

X

SD2.3S

2.0/2.3mmD Step Drill-Short

X

RSB3

2.3/2.8mmD Step Drill for 3.5mmD Implant

X

RSB3S

2.3/2.8mmD Short Step Drill for 3.5mmD Implant

X

RSB4

2.8/3.4mmD Step Drill for 4.3mmD Implant

X

RSB4S

2.8/3.4mmD Short Step Drill for 4.3mmD Implant

X

RSB5

4.2/3.3mmD Step Drill for 5.0mmD Implant

X

RSB5S

4.2/3.3mmD Short Step Drill for 5.0mmD Implant

X

RSB6

5.1/4.2mmD Step Drill for 6.0mmD Implant

X

RSB6S

5.1/4.2mmD Short Step Drill for 6.0mmD Implant

X

RDB3

3.2mmD Dense Bone Drill for 3.5mmD Implant

X

X

RDB4

4.0mmD Dense Bone Drill for 4.3mmD Implant

X

X

RDB5

4.7mmD Dense Bone Drill for 5.0mmD Implant

X

X

RDB6

5.7mmD Dense Bone Drill for 6.0mmD Implant

X

X

THT1.25

1.25mmD Tapered Hex Tool, Manual

X

X

THT1.25S

1.25mmD Tapered Hex Tool Short, Manual

X

HT1.25

1.25mmD Straight Hex Tool, Ratchet

X

HT1.25S

1.25mmD Straight Hex Tool Short, Ratchet

X

HT2.5 HT2.5S

2.5mmD Hex Insertion Tool, Ratchet 2.5mmD Hex Insertion Tool Short, Ratchet

X X

X

HD1.25

1.25mmD Hex Tool, Handpiece

X

X

HD2.5

2.5mmD Hex Insertion Tool, Handpiece

X

RTT3

Tri-Lobe Insertion Tool for 3.5mmD Implant

X

X

RTT4

Tri-Lobe Insertion Tool for 4.3mmD Implant

X

X

RTT5

Tri-Lobe Insertion Tool for 5.0mmD Implant

X

X

RTT6

Tri-Lobe Insertion Tool for 6.0mmD Implant

X

X

RTD3

Tri-Lobe Insertion Tool for 3.5mmD Implant

X

RTD4

Tri-Lobe Insertion Tool for 4.3mmD Implant

X

RTD5

Tri-Lobe Insertion Tool for 5.0mmD Implant

X

RTD6 FMD

Tri-Lobe Insertion Tool for 6.0mmD Implant Fixture-Mount Drill

X X

LDRILL

LOCATOR® Drill

X

DE

Drill Extender

X

X

R

Surgical Ratchet

X

X

PAR (x4)

Paralleling Tool 2.3/2.8mmD

X

SSHM

Universal Stainless Steel Handle

X

X X X X

X

X


Notes

37


Implant Direct Europe AG Hardturmstrasse 161 CH-8005 Zürich Tollfree Infoline 00800 4030 4030 www.implantdirect.eu

CAT-TRILOBE-EN, Rev. 09-2017

Tri lobe System Catalog- EU (English)  

Tri lobe System Catalog- EU (English)

Tri lobe System Catalog- EU (English)  

Tri lobe System Catalog- EU (English)