Page 1

SpectraÂŽ System Catalog


Table of Contents Page Implant Design & Surface

1

1037-21 Straight Abutment Includes: Fixation Screw, Transfer and Comfort Cap

Length: 1mm Platform: 3.7mm Diam

xxxxxxxxxxxx Platform 3.7 mm # 1037-21 Straight Abutment xxxxxxxxxxxx Platform 3.7 mm # 1037-21 Straight Abutment

2 Labeling

3 4-5

ScrewPlus®

Cover Screws, Healing Collars, Transfers & Analogs

19-21 22-24

Instruments, Surgical Drills & Drills Sequence

Prosthetic Techniques for ScrewIndirect® & GoDirectTM

16-17 18

Zirconia,Titanium, Gold & Plastic, Engaging & Non-Engaging Abutments

All-in-One Packaging

13 14-15

Selection Chart: Implants & Abutments

ScrewIndirect®

10-11 12

Procedures for Contoured Abutments

ScrewPlant®

6-7 8-9

GoDirectTM & GoDirectTMMini

Application-Specific Guide

Components for Screw-Receiving, Ball & LOCATOR® Abutments

25-27 28-29

Surgical Tray


Implant Design & Surface Mini-Threads with Double-lead Threads for Faster Insertion The body of all Spectra-System implants are tapered evenly down from the top to facilitate insertion in an undersized socket (stop at intermediate drill) for expansion in soft bone. This increases initial stability (G. Niznick: Clinical Oral Health 2000 “Achieving Success in Soft Bone”). The SBM textured surface extends over the entire endosseous portion of the Spectra-System implants. Mini-threads start 1mm below the crest of the bone and extend for 2-2.5mm before transitioning into double-lead threads to the apex of the implant. The mini-threads are half the depth and half the distance between adjacent peaks compared to the double-lead threads that extend to the apex of the implant. Mini-threads reduce stress in the critical crestal bone region while double-lead threads reduce the number of turns required to seat the implant. Vertical cutting grooves extend halfway up the implant from the apex for self-tapping insertion. Standard V-Thread

Buttress Thread Spectra-System implants (except GoDirectTM Mini) have V-Threads with an even 1.5o taper

GoDirectTM Mini combines buttress threads with an even 3.0o taper

1.2mm

Crest of the Ridge

0.5mm

1.0mm

0.4mm

0.3mm

0.7mm 1.4mm

1.2mm

0.6mm 1.5 Deg. ID Taper

3.0 Deg. ID Taper

1.5 Deg. OD Taper

3.0 Deg. OD Taper

SBM and HA Coated Surface Options SBM surface is created by using a Soluble Blast Media of Hydroxylapatite (HA) crystals to create a medium-rough texture. We use the same vendor for our SBM and HA coated surface treatments as was used by Paragon Implant Company from 1992-2000 when these studies were conducted. SEM Examination of Our Surfaces Mini-threads textured by blasting with SBM™: Blasted with Soluble HA Particles HA Coating: High Crystalline 40u layer SBM Surface 20X

SBM Surface 50X

Animal Studies Bone Response to SBM Surface

Brazilian Study* Shows SBM

% Provides Superior Bone Contact

80

80

Mean Percentage of Bone Contact

70 60 50

70 62.75

60 48.91

30

HA Surface 50X

41.70

10

10 TPS

Machined

52.7

30 20

HA

57.6

40

20

SBM

63.8

50

58.89

40

HA Surface 20X

LSU Study* Shows SBM

% Provides Superior Bone Contact

36

SBM

HA

TPS

Machined

1


System 2-Stage Implant ScrewPlant®

2

1-Stage Implant ScrewPlus®

1-Piece Implant ScrewIndirect®

1-Piece Implant GoDirectTM & GoDirectTM Mini


Labeling

3.7 mm 3.7 mm 3.7 mm 3.7 mm

ScrewPlant® Implant Vial and Cap Label 2 3 10 = ScrewPlant® SBM 37 = 3.7mmD body diameter 13 = 13mmL body length

4

103713

ScrewPlant Implant ®

13

xxxxxxxxxxxx Body ScrewPlant® # 103713 Platform xxxxxxxxxxxx Body ScrewPlant® # 103713 Platform

1

SBM™ 3.7mm Diam 13mm 3.7mm Diam

5 6

12

7

11

8

10

9

xxxxxxxxxxxx Platform 3.7 mm # 1037-21 Straight Abutment xxxxxxxxxxxx Platform 3.7 mm # 1037-21 Straight Abutment

ScrewPlant® Prosthetic Vial and Cap Label 1 2

1037-21

3 10 = ScrewPlant® prosthetics 37 = 3.7mmD platform diameter -21= pr code

4

Straight Abutment Includes: Fixation Screw, Transfer and Comfort Cap

Length: 1mm Platform: 3.7mm Diam

13

1037-21 1mmL

7 13

8 14

9

10

11

1) Our products carr requirements of the Medical Device Directive 93/42/EEC 2) Manufacturer Symbol 3) Product code or reference number 4) Product description 5) Use before expiration date (XXXX-XX) 6) Gamma sterilization symbol 7) Single-use only symbol 8) Caution: US law restricts the sale of these devices by or on the order of a dentist or physician 9) Tamper proof symbol 10) Refer to Instructions For Use (IFU) 11) Lot number (XXXXXXXXXX) 12) Implant diameter color reference on surgical tray 13) Implant prosthetic platform diameter (written and color-coded) 14) Non-sterile symbol

3


ScrewPlant® ScrewPlant® Two-Stage Implant System featuring:

All-in-One Packaging

• Internal connection with 2mm long hex & external bevel xture-mount usable as a transfer & • Color-c shortened for use as a straight abutment with snap-on comfort cap • 2mm extender retained by cover screw for use as a healing collar or for one-stage surgery • Surface options: SBM (Soluble Blast Media) or HA-coated • Tapered body allows insertion using Zimmer© Dental’s Tapered Screw-Vent® drills

3.7mmD Platform

4.7mmD Platform

Carrier/Transfer

5.7mmD Platform

Snap-On Comfort Cap

3.7mmD Implant

4.7mmD Implant

5.7mmD Implant

Extender

Fixture-Mount Transfer: Shortened f abutment with Snap-On Comfort Cap and Transfer

step 1

4

Cover Screw

step 2

step 3

step 4


ScrewPlant®: Two-Piece Implant for Two-Stage Surgery ScrewPlant®

SBM and HA Surface Implants

Includes Cover Screw, Fixture-Mount, Extender & Comfort Cap

3.7mmD SBM Code 103708 103710 103711 103713 103716

HA Code 113708 113710 113711 113713 113716

Diameter 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD

HA Code 114708 114710 114711 114713 114716

Diameter 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD

HA Code 115708 115710 115711 115713 115716

Diameter 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

103708 113708

103710 113710

103711 113711

103713 113713

103716 113716

104708 114708

104710 114710

104711 114711

104713 114713

104716 114716

105708 115708

105710 115710

105711 115711

105713 115713

105716 115716

4.7mmD SBM Code 104708 104710 104711 104713 104716

5.7mmD SBM Code 105708 105710 105711 105713 105716

5


ScrewPlus® ScrewPlus® One-Stage Implant System featuring:

All-in-One Packaging

• Internal connection with 2mm long hex & external bevel • Color-c xture-mount usable as a transfer & shortened for use as a straight abutment with snap-on comfort cap • 2mm extender retained by cover screw for use as a healing collar • Surface implants: SBM (Soluble Blast Media) • Tapered body allows insertion using Zimmer© Dental’s Tapered Screw-Vent® drills

3.7mmD Platform

4.7mmD Platform

5.7mmD Platform

Carrier/Transfer

6.5mmD Platform

Snap-On Comfort Cap

3.7mmD Implant

3.7mmD Implant

4.7mmD Implant

5.7mmD Implant

Extender

Fixture-Mount Transfer: Shortened f abutment with Snap-on Comfort Cap and Transfer

step 1

6

Cover Screw

step 2

step 3

step 4


ScrewPlus®: Two-Piece Implant for One-Stage Surgery ScrewPlus®

SBM Surface Implants

Includes Cover Screw, Fixture-Mount, Extender & Comfort Cap

3.7mmD SBM Code 203008 203010 203011 203013 203016

Diameter 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD

Diameter 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD

Diameter 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

Diameter 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 6.5mmD 6.5mmD 6.5mmD 6.5mmD 6.5mmD

203008

203010

203011

203013

203016

203708

203710

203711

203713

203716

204708

204710

204711

204713

204716

3.7mmD SBM Code 203708 203710 203711 203713 203716

4.7mmD SBM Code 204708 204710 204711 204713 204716

5.7mmD SBM Code 205708 205710 205711 205713 205716

205708

205710

205711

205713

205716

7


ScrewIndirect® ScrewIndirect® One-Piece Implant System Featuring:

All-in-One Packaging

• Multi-Unit head with retentive groove & beveled shoulder 2.5mm above bone • Double-lead threads for faster insertion, with quadruple-lead mini-threads for reduced stress concentration near crest of bone • Color-c xture mount usable as a snap-on transfer • Snap-on plastic comfort cap • Common prosthetic platform across all four diameters of implants • Includes 2mm implant extender • Tapered body allows insertion using Zimmer© Dental’s Tapered Screw-Vent® drills

5.0mmD Platform

5.0mmD Platform

5.0mmD Platform

Carrier/Transfer

5.0mmD Platform

Snap-On Comfort Cap

Extender

3.0mmD Implant

3.7mmD Implant

4.7mmD Implant

5.7mmD Implant

Extender Transfer

Snap-On Comfort Cap and Transfer Seat retentive snap-on comfort caps

Seat retentive snap-on transfers

Clinical Applications Screw-Retained Bar Overdenture

8

Fixed-Detachable Restoration


ScrewIndirect®: One-Piece Implant for One-Stage Surgery ScrewIndirect®

SBM Surface Implants

Includes Carrier/Transfer (orange), Extender, Transfer & Comfort Cap [Requires 2.5mmD Hex Tool]

3.0mmD Code 403008 403010 403013 403016

Diameter 3.0mmD 3.0mmD 3.0mmD 3.0mmD

Length 8mmL 10mmL 13mmL 16mmL

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD

Diameter 3.7mmD 3.7mmD 3.7mmD 3.7mmD

Length 8mmL 10mmL 13mmL 16mmL

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD

Diameter 4.7mmD 4.7mmD 4.7mmD 4.7mmD

Length 8mmL 10mmL 13mmL 16mmL

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD

Diameter 5.7mmD 5.7mmD 5.7mmD 5.7mmD

Length 8mmL 10mmL 13mmL 16mmL

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD

403008

403010

403013

403016

403708

403710

403713

403716

404708

404710

404713

404716

405708

405710

405713

405716

3.7mmD Code 403708 403710 403713 403716 4.7mmD Code 404708 404710 404713 404716

5.7mmD Code 405708 405710 405713 405716

Components for use with 2mmL ScrewIndirect® Extender on page 24 Includes Fixation Screw [1000-01] ScrewIndirect® Implant Copings Gold Titanium Plastic Gold/Plastic Titanium Plastic

Code 4000-64 4000-65 4000-66 4000-67 4000-69 4000-09P 1000-01 1000-05

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD -

Description Gold Coping Titanium Coping Plastic Coping Gold & Plastic Coping Titanium Temporary Coping (includes 1000-05) ScrewIndirect Scan Adapter - New Replacement Fixation Screw - Pack of 2 Replacement Extender Fixation Screw - Pack of 2

4000-64 4000-65

4000-66

4000-67

4000-69 4000-09P

ScrewIndirect® Comfort Cap, Transfers & Analog

Code 4000-13 4000-02 4000-62 4000-63 4000-06 1000-10 1000-06

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD -

Description Plastic Comfort Cap - Pack of 2 Plastic Implant Transfer - Pack of 2 Open-Tray Transfer plus Fixation Screw Closed-Tray Transfer plus Fixation Screw Aluminum Implant Analog Replacement Open-Tray Fixation Screw - Pack of 2 Replacement Closed-Tray Fixation Screw - Pack of 2

4000-13

4000-02

4000-62

4000-63

4000-06

9


GoDirectTM GoDirectTM & GoDirectTM Mini One-Piece Implant System Featuring:

All-in-One Packaging Carrier/Transfer

4.0mmD Platform

• One-piece implant with Zest LOCATOR® compatible platform • Tapered, self-tapping body for increased stability in soft bone • Double-lead threads for faster insertion plus quadruple-lead mini-threads for reduced stress concentration near crest of bone • allows for conversion to multi-unit abutment or

433013-M 13mm Length

• All-in-One Packaging includes snap-on transfer & comfort cap

Snap-On Comfort Cap

3.0mmD Implant

3.0mmD Implant

3.7mmD Implant

4.7mmD Implant

Snap-On Comfort Cap and Transfer Use plastic carrier to carry implant

Attach comfort cap to implant

Clinical Applications Attach implant carrier as impression transfer

Attach housing for chairside pickup

GoDirectTM is made and sold under license from Zest IP Holdings, LLC and Zest Anchors, LLC. US Pat. 6,030,219 and 6,299,447

10


GoDirectTM & GoDirectTM Mini: One-Piece Implant for One-Stage Surgery GoDirectTM

SBM Surface Implants 3.0mmD GoDirectTM Mini Code 423010-ML 423011-ML 423013-ML 423016-ML 433010-ML 433011-ML 433013-ML 433016-ML

Diameter 3.0mmD 3.0mmD 3.0mmD 3.0mmD 3.0mmD 3.0mmD 3.0mmD 3.0mmD

Length 10mmL 11.5mmL 13mmL 16mmL 10mmL 11.5mmL 13mmL 16mmL

Shoulder Height 1.5mmL 1.5mmL 1.5mmL 1.5mmL 3.0mmL 3.0mmL 3.0mmL 3.0mmL

423010-ML

423011-ML

423013-ML

423016-ML

433010-ML

433011-ML

433013-ML

433016-ML

3.0mmD GoDirectTM Code 423010L 423011L 423013L 433010L 433011L 433013L

Diameter 3.0mmD 3.0mmD 3.0mmD 3.0mmD 3.0mmD 3.0mmD

Length 10mmL 11.5mmL 13mmL 10mmL 11.5mmL 13mmL

Shoulder Height 1.5mmL 1.5mmL 1.5mmL 3.0mmL 3.0mmL 3.0mmL

423010L 423011L 423013L

433010L

433011L 433013L

423710L 423711L

433710L

433711L 433713L

3.7mmD GoDirectTM Code 423710L 423711L 423713L 433710L 433711L 433713L

Diameter 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD

Length 10mmL 11.5mmL 13mmL 10mmL 11.5mmL 13mmL

Shoulder Height 1.5mmL 1.5mmL 1.5mmL 3.0mmL 3.0mmL 3.0mmL

423713L

4.7mmD GoDirectTM Code 424708L 424710L 424713L

Diameter 4.7mmD 4.7mmD 4.7mmD

Length 8mmL 10mmL 13mmL

Shoulder Height 1.5mmL 1.5mmL 1.5mmL

Multi-Unit & Ball Abutment for GoDirect TM Implant

Code 4500-61 4500-71

Platform 5.0mmD 5.0mmD

424708L

424710L

424713L

Includes Transfer & Comfort Cap [Requires 1.25mmD Hex Tool]

Collar Heights 1mm 1mm

4500-61

4500-71

11


ScrewPlant® & ScrewPlus® All-in-One Packaging The implant is mounted on a color-c xture-mount designed for use as a transfer & shortened for use as a straight abutment. cover screw is included in each vial. The ScrewPlant® & ScrewPlus® also A snap-on comfort cap is provided f include a 2mm extender retained by the cover screw for use as a healing collar.

Prepare surgical site with double cutting drill

All of Implant Direct’s implants come in a sterile vial

Each label is color-coded with two tear-

Each cap is color-coded by platform diameter of implant

Drop implant assembly out of vial onto a sterile surface

Remove implant assembly with xture-mount drill or ratchet

Insert implant into osteotomy

I

Remove the holder containing the cover screw & comfort cap

Snap-on comfort cap is located in the top portion of holder

xture-moun

to labial

Flat of hex indexed to buccal

Remov

xture-mount

Alig to the buccal

xture-mount

Attach xture-mount to corresponding color-coded implant analog

Remove colored section fr

To attach abutment, use 30Ncm in hard bone. In soft bone, use ressure

Test retention & rotate if necessary to increase retention

12

Check for occlusal clearance prior to attaching comfort cap

xture-mount through groove creating a

Suture soft tissue around comfort cap


Clinical & Laboratory Procedures for Contoured Abutments Orienting the 15º Angled Abutment The flat side of the Fixture-Mount/Transfer [Fig. 1] & the angle of the 15° abutment [Fig. 2] are manufactured to align with the flat of the implant’s internal hexagon.

Fig. 2 The two-piece, 15º Angled Abutment consists of an angled body and a Fixation Screw

Fig. 1

Fixture-Mount/Transfer

To establish the optimum angle of the abutment, index the flat surface of the Fixture-Mount/Transfer either toward or away from the desired direction of abutment angle at the time of implant placement.

Option 1 : Attaching an Angled Abutment & chairside procedures for preparation Remove the healing collar with a 1.25mmD hex tool

Attach the abutment with the 1.25mmD hex tool

Mark the required modifications to achieve appropriate clearance

Detach the abutment with the 1.25mmD hex tool

Attach the abutment to the corresponding implant analog & reduce the abutment to achieve appropriate clearance

Option 2 : Stage-One transfer followed by laboratory procedures for abutment preparation & provisionalization

During implant placement, index the flat of the fixture-mount

Block out the top of the fixture-mount & make a transfer impression

Attach the cover screw & submerge implant

Attach the fixturemount to the implant analog & seat into the negative of the impression

Pour the working cast in dental stone with soft tissue replication material

Remove the fixturemount from the working cast with the 1.25mmD hex tool

Attach the angled abutment to the implant analog in the working cast with a 1.25mmD hex tool

Modify angle of abutment & refine margins as required

Fabricate the temporary crown

At stage-2 surgery, attach the prepared abutment & tighten to 30 Ncm with a torque wrench

Occlude screw access hole & confirm contour of restoration

Cement the provisional restoration

Common procedures for abutment placement, margin finessing, impressing & placement of restoration Tighten to 30 Ncm with a torque wrench

Finesse the margins with a high-speed bur & copious irrigation prior to final impressing

Make an impression following standard clinical procedures

Attach provisional restoration & cement onto the prepared abutment

Follow standard laboratory procedures to fabricate the final restoration & cement onto the prepared abutment

13


ScrewIndirectÂŽ Implant Prosthetic Technique

4000-69

1000-01 1000-05

1000-10

1. Use a forceps to remove the comfort caps exposing the tops of the implants.

2. Select the Titanium Temporary Coping matching the prosthetic platform. Titanium Coping [4000-69] screws [1000-01] and [1000-05]. An optional longer screw [1000-10] is also available.

3. Plac rew through the coping & tighten using the 1.25mmD Hex Tool. Standard torque value f rews is 30Ncm.

re is less than 40 degrees of 4. C relative divergence between copings to be splinted together.

5. Mark top of Titanium Temporary Copings with indelible marker. Place denture on top of copings to transfer their position to under surface of denture.

6. C kings on under surface of denture. Use acrylic trimmer to drill holes through denture corresponding to marked positions.

7. Seat denture over Titanium Temporary ve placement. Copings to c Mark copings to indicate required vertical reduction prior to luting to denture base.

8. Occlude screw access hole with cotton pellet. Use autopolymerizing acrylic or similar light cure material to attach prosthesis to Titanium Temporary Copings. Allow to set prior to removal from mouth.

9. Remove prosthesis fr over to expose tissue side. Use additional ny voids autopolymerizing resin t around the processed copings.

10a & b. Attach implant replicas to copings and tighten using 1.25mmD Hex Tool. Pour a working cast using a soft tissue replication material if required due to anatomical undercuts.

11. Remove prosthesis from working cast and trim to allow access for patient cleaning. The prosthesis is no xed restoration, removable by clinician only.

12. Attach prosthesis to implants & tighten in place using the appropriate tooling. Occlude screw access holes with material of choice.

14


GoDirectTM Implant LOCATOR® Attachment Prosthetic Technique

Tissue height Tissue height Bone height

Bone height

1. Use the black plastic component to carry the GoDirectTM implant to site. Initiate self-tapping of implant into osteotomy by rotating black carrier. Remove black plastic carrier once implant is stabilized.

2. Use either the [GDIT] insertion tool or [GDID] insertion drill to rotate the GoDirectTM implant into the osteotomy. Stabilize the assembly with

3. The gold colored section of the implant should extend a minimum of 1.5mm above the soft tissue.

4. Attach the Parallel Posts [1000-97] to the implants to determine the divergence If the relative divergence.

5a. Chairside Process: Place the LOCATOR® Block-Out Spacer over the head of the implant. Attach the metal cap with Black Processing Male from the LOCATOR® Male Processing Package [1000-98S-L, 1000-98SI-L].

5b. Chairside Process: Mark location of components on under surface of prosthesis. Relieve the areas within the prosthesis so it can be fully seated over the metal cap without interference. Process the cap into denture following standard procedures.

6a. Transfer Process: Place the Impression Coping [4500-02] onto the implant. Inject impression material around the coping & record a full-arch impression.

6b. Laboratory Procedure: Insert the Implant Analogs [4500-06] into the Impression Copings [4500-02]. The laboratory fabricates the working cast.

7. Place the white Block-Out Spacer over the head of the Implant Analog. Attach the metal cap with Black Processing Male. Process the denture following standard procedures.

8. Pull on the Black Processing Male at an angle & remove it from the metal cap. If needed, wedge a tool against the bottom inside of the black plastic to aid in removal.

9. Replacement Male of choice into the empty metal cap located within the denture.

10. patient on standard cleaning instructions.

15


Selection Chart: Implants & Abutments 3.7mmD Platform

4.7mmD

Fixture-Mount ScrewPlant速

Cover Screws, Healing Collars, Implant Transfers & Analogs

1037-01

1037-13 1037-13N

Straight Abutments, Comfort Caps, Transfers & Analogs

Engaging & Non-Engaging Abutments

1037-15 1037-15N

1037-05 1037-05N

1037-08 1037-08N

1037-06

Fixture-Mount ScrewPlant速

1047-01

1047-13 1047-13N

1047-15 1047-15N

1037-31 1037-32

1037-21

1037-40

1037-51 1037-52

1037-23

1037-51-15C 1037-51-08C 1037-30L 1037-52-15C 1037-52-08C

1037-46

1037-71

1037-22

3037

3037-02

1037-31C 1037-32C

1047-05 1047-05N

3047-26

3037-26

1037-21N 1037-22N

Straight & Angled Contoured & Laboratory Abutments

Fixture-Mount ScrewPlus速

1037-72

1037-47

1037-73

1037-49

1037-74

1047-21N 2047-20 1047-22N

1047-31 1047-32

3047-02

1047-31C 1047-32C

1047-40

3047

1047-51-15C 1047-52-15C

1047-51 1047-52

1047-46

1047-71

1047-72

1047-61

1047-62

Ball, Multi-Unit & LOCATOR速 Abutments 1037-61

1037-91-L

16

1037-92-L

1037-62

1037-93-L

1037-64

1037-94-L

1037-95-L

1047-91-L

1047-92-L

1047-93-L


Platform

5.7mmD Platform

Fixture-Mount ScrewPlus速

1047-08 1047-08N

1047-06

6.5mmD Platform

Fixture-Mount ScrewPlant速

1057-01

Fixture-Mount ScrewPlus速

1057-13

1057-15

1057-05

1057-08

1057-06

Fixture-Mount ScrewPlus速

2065-01

2065-13

3057-26

1047-21

1047-22

1047-23

1047-30L

1057-21

2057-20

1047-47

1047-49

1047-73

1047-74

1047-64

1047-94-L

1057-31

1057-71

1057-61

1047-95-L

1057-92-L

1057-22

1057-23

2065-08

2065-06

2065-20 3065-02

3057

1057-32

1057-40

2065-05

3065-26

3057-02

1047-51-08C 1047-52-08C

2065-15

1057-51

1057-46

1057-52

1057-47

1057-72

1057-73

1057-62

1057-93-L

1057-94-L

3065

1057-30L

1057-49

2065-40

2065-46

2065-47

2065-49

1057-74

1057-64

1057-95-L

17


Cover Screws, Healing Collars, Transfers & Analogs Replacement Surgical Cover Screws

Code 1037-01 1047-01 1057-01 2065-01

Requires 1.25mmD Hex Tool

Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD

Healing Collars

Code 1037-13N 1037-13 1037-15N 1037-15 1047-13N 1047-13 1047-15N 1047-15 1057-13 1057-15 2065-13 2065-15

1047-01

1037-13N

1047-13N

1037-13

1047-13

1037-15N

1047-15N

1037-15

1047-15

1057-01

2065-01

1057-13

2065-13

1057-15

2065-15

Requires 1.25mmD Hex Tool

Platform 3.7mmD 3.7mmD 3.7mmD 3.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 5.7mmD 5.7mmD 6.5mmD 6.5mmD

Width 3.8mmD 4.8mmD 3.8mmD 4.8mmD 4.8mmD 5.8mmD 4.8mmD 5.8mmD 6.6mmD 6.6mmD 7.4mmD 7.4mmD

Closed-Tray Implant Transfers

Code 1037-05N 1037-05 1047-05N 1047-05 1057-05 2065-05

Platform 3.7mmD 3.7mmD 4.7mmD 4.7mmD 5.7mmD 6.5mmD

Length 3mmL 3mmL 5mmL 5mmL 3mmL 3mmL 5mmL 5mmL 3mmL 5mmL 3mmL 5mmL

Includes Fixation Screw

Replacement Screw 1000-06 1000-06 1000-06 1000-06 1000-06 1000-06

Open-Tray Implant Transfers

Code 1037-08N 1037-08 1047-08N 1047-08 1057-08 2065-08

1037-01

1037-05N

1037-05

1057-05

1047-05N

1047-05

2065-05

1037-08N

1037-08

1057-08

1047-08N

1047-08

2065-08

1057-06

2065-06

1000-06

Includes Fixation Screw

Platform 3.7mmD 3.7mmD 4.7mmD 4.7mmD 5.7mmD 6.5mmD

Replacement Screw 1000-10 1000-10 1000-10 1000-10 1000-10 1000-10

1000-10

Implant Analogs

Code 1037-06 1047-06 1057-06 2065-06

18

Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD

1037-06

1047-06


Straight Abutments, Snap-on Transfers and Lab Analogs Straight Abutments

Code 1037-21N 1037-22N 1037-21 1037-22 1037-23 2047-20 1047-21N 1047-22N 1047-21 1047-22 1047-23 2057-20 1057-21 1057-22 1057-23 2065-20

Includes Transfer, Comfort Cap & Fixation Screw [1000-01]

Platform 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD 6.5mmD

Collar Heights 1mm 2mm 1mm 2mm 3mm 0mm 1mm 2mm 1mm 2mm 3mm 0mm 1mm 2mm 3mm 0mm

Abutment Width 3.7mmD 4.7mmD 5.7mmD 6.5mmD

1047-21N

1037-22N

1047-22N

1037-21

1047-21

1057-21

2047-20

1037-22

1047-22

1057-22

2057-20

1037-23

1047-23

1057-23

2065-20

Code 3037-26 3047-26 3057-26 3065-26

Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD

Straight Abutment Analogs

Code 3037 3047 3057 3065

3037-02

3047-02

3057-02

3065-02

Includes two pieces

Straight Abutment Comfort Caps

3037-26

3047-26

3057-26

3065-26

3037

3047

3057

3065

3037-28

3047-28

3057-28

3065-28

Includes Castable Coping

Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD

Straight Abutment Castable Copings

Code 3037-28 3047-28 3057-28 3065-28

1037-21N

Includes two pieces

Straight Abutment Transfers

Code 3037-02 3047-02 3057-02 3065-02

Use Analog 3037 3037 3047 3047 3047 3047 3047 3047 3057 3057 3057 3057 3065 3065 3065 3065

Includes two pieces

Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD

19


Straight & Angled Contoured, Titanium & Zirconia Abutments Straight Titanium Contoured Abutments

Code 1037-31 1037-32 1047-31 1047-32 1057-31 1057-32

Platform 3.7mmD 3.7mmD 4.7mmD 4.7mmD 5.7mmD 5.7mmD

Includes Fixation Screw [1000-01]

Collar Heights 1mm 2mm 1mm 2mm 1mm 2mm

Straight Zirconia Contoured Abutments

Code 1037-30CB 1037-31C 1037-32C 1047-30CB 1047-31C 1047-32C

Platform 3.7mmD 3.7mmD 3.7mmD 4.7mmD 4.7mmD 4.7mmD

Platform 3.7mmD 3.7mmD 4.7mmD 4.7mmD 5.7mmD 5.7mmD

Collar Heights 0.5mm 1.5mm 2.5mm 0.5mm 1.5mm 2.5mm

Angulation 15° 15° 15° 15° 15° 15°

8° & 15° Zirconia Contoured Abutments

Code 1037-51-08C 1037-51-15C 1037-52-08C 1037-52-15C 1047-51-08C 1047-51-15C 1047-52-08C 1047-52-15C

Platform 3.7mmD 3.7mmD 3.7mmD 3.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD

1047-31

1057-31

1037-32

1047-32

1057-32

1037-30CB

1037-31C

1037-32C

1047-30CB

1047-31C

1047-32C

1037-51

1047-51

1057-51

1037-52

1047-52

1057-52

Includes Fixation Screw [1000-01]

15° Angled Titanium Contoured Abutments

Code 1037-51 1037-52 1047-51 1047-52 1057-51 1057-52

1037-31

Angulation 8° 15° 8° 15° 8° 15° 8° 15°

Includes Fixation Screw [1000-01]

Collar Heights 1mm 2mm 1mm 2mm 1mm 2mm

Includes Fixation Screw [1000-01]

Collar Heights 1.5mm 1.5mm 2.5mm 2.5mm 1.5mm 1.5mm 2.5mm 2.5mm

1037-51-08C

1037-51-15C

1037-52-08C

1037-52-15C

1047-51-08C

1047-51-15C

1047-52-08C

1047-52-15C

Replacement Fixation Screws

Code 1000-01 1000-06 1000-10

Description Short Fixation Screw Fixation Screw Long Fixation Screw

Closed-Tray Transfer & Temporary Abutment Abutments

1000-01

20

Open-Tray Transfer & Waxing Screw

1000-06

1000-10


Lab, Engaging & Non-Engaging Abutments Straight Full Contour Abutments

Code 1037-30L 1047-30L 1057-30L

Includes Fixation Screw [1000-01]

Platform 3.7mmD 4.7mmD 5.7mmD

Collar Heights 1mm 1mm 1mm

Gold Engaging Cast-to Abutments

Code 1037-40 1047-40 1057-40 2065-40

1047-30L

Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD

Collar Heights 1mm 1mm 1mm 1mm

1037-40

1047-40

Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD GoDirectTM Implant only

Collar Heights -

Plastic Engaging Temporary Abutments

Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD

Scan Adapters

Code 1037-09P 1047-09P 1057-09P 2065-09P

Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD

2065-40

1037-46

1047-46

1057-46

4500-46

Includes Fixation Screw [1000-06]

Collar Heights -

Titanium Non-Engaging Temporary Abutments

Code 1037-49 1047-49 1057-49 2065-49

1057-40

Includes Fixation Screw [1000-01]

2065-46

Code 1037-47 1047-47 1057-47 2065-47

1057-30L

Includes Fixation Screw [1000-01]

Plastic Non-Engaging Castable Abutments

Code 1037-46 1047-46 1057-46 2065-46 4500-46

1037-30L

1037-47

1047-47

1057-47

2065-47

1037-49

1047-49

1057-49

2065-49

1037-09P

1047-09P

1057-09P

2065-09P

Includes Fixation Screw [1000-01]

Collar Heights -

Includes Fixation Screw {For use with Implant Direct design library}

Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD

Collar Heights -

Replacement Screws 1000-20 1000-01 1000-01 1000-01

21


Selection Chart: Overdenture & Screw-Retained Restorations 3.7mmD Platform

4.7mmD Platform

5.7mmD Platform

6.5mmD Platform

Multi-Unit Abutments (*Includes Transfer and Comfort Cap) 1037-61 1037-62 1037-64

1047-61 1047-62 1047-64

1057-61 1057-62 1057-64

Multi-Unit Abutment Transfers, Analog & Comfort Cap Open-Tray Transfer

1000-61

*1000-68

*4000-13

Closed-Tray Transfer

1000-62

1000-63

Multi-Unit Copings 1000-64

Gold

1000-65

Titanium

1000-66

Plastic

1000-67

Gold/Plastic

1000-69

Titanium

1000-09P

PEEK Scan Adapter

Ball Abutments (**Includes Transfer and Comfort Cap) 1037-71 1037-72 1037-73 1037-74

1047-71 1047-72 1047-73 1047-74

1057-71 1057-72 1057-73 1057-74

Ball Attachments

**1000-87

**1000-84

1000-85

1000-81

LOCATOR®Abutments 1037-91 - L 1037-92 - L 1037-93 - L 1037-94 - L 1037-95 - L

1000-82

1000-88

1000-83

1000-86

(***Includes Transfer, Abutment Housing Kit and Comfort Cap)

1047-91 - L 1047-92 - L 1047-93 - L 1047-94 - L 1047-95 - L

1057-92 - L 1057-93 - L 1057-94 - L 1057-95 - L

LOCATOR® Attachments

1000-100-L4 1000-92C-L4 1000-92G-L4 1000-92R-L4 1000-92E-L4 1000-100-L20 1000-92C-L20 1000-92G-L20 1000-92R-L20 1000-92E-L20

4500-26 1000-95-L4 1000-95-L20

22

1000-94-L4 1000-94-L20

1000-92P-L4 1000-92B-L4 1000-92Z-L4 1000-93-L4 1000-92P-L20 1000-92B-L20 1000-92Z-L20 1000-93-L20

1000-98S-L2 1000-98SI-L1 1000-91-L4 1000-98S-L10 1000-98SI-L2 1000-91-L10 1000-96-L 1000-98SI-L10

Abutments are compatible with “ZimmerBiomet” (Tapered Screw-Vent), BioHorizons® (internal) and MIS Implants with 3.5mm, 4.5mmD and 5.7mmD prosthetic platforms


Multi-Unit, Ball & LOCATOR® Abutments Multi-Unit Overdenture Abutments

Code 1037-61 1037-62 1037-64 1047-61 1047-62 1047-64 1057-61 1057-62 1057-64

Platform 3.7mmD 3.7mmD 3.7mmD 4.7mmD 4.7mmD 4.7mmD 5.7mmD 5.7mmD 5.7mmD

Includes Transfer & Comfort Cap [Requires 1.25mmD Hex Tool]

Collar Heights 1mm 2mm 4mm 1mm 2mm 4mm 1mm 2mm 4mm

Ball Abutments

Code 1037-71 1037-72 1037-73 1037-74 1047-71 1047-72 1047-73 1047-74 1057-71 1057-72 1057-73 1057-74

1037-62

1037-64

1047-61

1047-62

1047-64

1057-61

1057-62

1057-64

Includes Transfer & Comfort Cap [Requires 1.25mmD Hex Tool]

Platform 3.7mmD 3.7mmD 3.7mmD 3.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

LOCATOR® Abutments

Code 1037-91-L 1037-92-L 1037-93-L 1037-94-L 1037-95-L 1047-91-L 1047-92-L 1047-93-L 1047-94-L 1047-95-L 1057-92-L 1057-93-L 1057-94-L 1057-95-L

1037-61

Collar Heights 1mm 2mm 3mm 4mm 1mm 2mm 3mm 4mm 1mm 2mm 3mm 4mm

1037-71

1037-72

1037-73

1037-74

1047-71

1047-72

1047-73

1047-74

1057-71

1057-72

1057-73

1057-74

Requires LOCATOR® insertion tool

Platform 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

Collar Heights1 1mm 2mm 3mm 4mm 5mm 1mm 2mm 3mm 4mm 5mm 2mm 3mm 4mm 5mm

1037-91-L 1037-92-L 1037-93-L 1037-94-L 1037-95-L

1047-91-L 1047-92-L 1047-93-L 1047-94-L 1047-95-L

1057-92-L 1057-93-L 1057-94-L 1057-95-L

Collar heights do not include the 1.5mm to be placed supragingival.

1

23


Ancillary Components for Overdenture & Screw-Retained Restorations Multi-Unit Abutment Comfort Cap, Transfers & Analog

Code 1000-61 1000-62 1000-63 1000-68 4000-13 1000-14 1000-15

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD -

Description Aluminum Analog Open-Tray Transfer plus Fixation Screw Closed-Tray Transfer plus Fixation Screw Plastic Abutment Transfer - Pack of 2 Plastic Comfort Cap - Pack of 2 Replacement Open-Tray Fixation Screw - Pack of 2 Replacement Closed-Tray Fixation Screw - Pack of 2

Multi-Unit Abutment Components

Code 1000-64 1000-65 1000-66 1000-67 1000-69 1000-05 1000-09P

Screws require 1.25mmD Hex Tool

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD -

1000-61

1000-62

1000-63

1000-68

4000-13

Includes Fixation Screw [1000-05]

Description Gold Coping Titanium Coping Plastic Coping Gold & Plastic Coping Titanium Temporary Coping Coping Fixation Screw - Pack of 2 Multi-Unit Scan Adapter - New

1000-05 1000-64 1000-65 1000-66 1000-67 1000-69 1000-09P

Ball Abutment Components

Code 1000-81 1000-82 1000-83 1000-84 1000-85 1000-86 1000-87 1000-88

Description Ball Abutment Housing - Pack of 2 Nylon Liner - Pack of 2 Nylon Liner Transfer - Pack of 2 Ball Abutment Transfer - Pack of 2 Ball Abutment Analog Ball Abutment Tools Ball Abutment Comfort Cap - Pack of 2 Ball Abutment Housing & Nylon Liner

1000-81

1000-82

1000-83

1000-84

1000-85

1000-87

1000-86

1000-88

LOCATOR® Abutment Transfer, Analogs and Alignment Tools

Code 1000-94-L4 1000-94-L20 1000-95-L4 1000-95-L20 1000-97-L4 4500-26 1000-99-L

Description Impression Coping - Pack of 4 Impression Coping - Pack of 20 Abutment Analog 4mmD - Pack of 4 Abutment Analog 4mmD - Pack of 20 Abutment Parallel Post - Pack of 4 Comfort Cap - Pack of 2 Angle Measure Guide

1000-99-L

1000-94-L4 1000-94-L20

1000-97-L4

4500-26

1000-95-L4 1000-95-L20

LOCATOR® Abutment Components

Description Retention 0.68 kg Male Blue (up to 20°) 1.36 kg Male Pink (up to 20°) 2.27 kg Male Clear (up to 20°) 0.00 kg Male Gray (up to 40°) 0.23-0.68 kg Male Red (up to 40°) 0.91 kg Male Orange (up to 40°) 1.36-1.82 kg Male Green (up to 40°) Processing MaleBlack Description Retention Block-Out Spacer 0.4mm Description Retention Metal Cap + Processing Male Black Retention Description Assorted Male Processing Package (up to 20°) Assorted Male Processing Package (up to 40°)

24

Pack of 20 Pack of 4 1000-92B-L20 1000-92B-L4 1000-92P-L20 1000-92P-L4 1000-92C-L20 1000-92C-L4 1000-92Z-L20 1000-92Z-L4 1000-92R-L20 1000-92R-L4 1000-92E-L20 1000-92E-L4 1000-92G-L20 1000-92G-L4 1000-93-L20 1000-93-L4 Pack of 20 Pack of 4 1000-100-L20 1000-100-L4 Pack of 10 Pack of 4 1000-91-L10 1000-91-L4 Pack of 10 Pack of 2 Pack of 1 1000-98SI-L1 1000-98SI-L2 1000-98SI-L10 1000-98S-L2 1000-98S-L10

1000-91-L4 1000-91-L10

1000-92R-L4 1000-92R-L20

1000-92B-L4 1000-92B-L20

1000-92E-L4 1000-92E-L20

1000-92P-L4 1000-92P-L20

1000-92G-L4 1000-92G-L20

1000-92C-L4 1000-92C-L20

1000-93-L4 1000-93-L20

1000-92Z-L4 1000-92Z-L20

1000-100-L4 1000-100-L20

1000-98SI-L1 1000-98SI-L2 1000-98SI-L10

1000-98S-L2 1000-98S-L10


Surgical & Prosthetic Instruments Tapered Hex Tools

Code THT1.25 THT1.25S

Description 1.25mmD Tapered Hex Tool-Long 1.25mmD Tapered Hex Tool-Short THT1.25

Straightt Hex He Tools

Code HT1.25L HT1.25 HT1.25S HT2.0 HT2.0S HT2.5 HT2.5S HT3.0 GDIT HT3.0S HT2.0LG HT2.0SG HT2.5LG HT2.5SG HT3.0LG HT3.0SG

Square connection for use with Ratchet or Torque Wrench

Description 1.25mmD Straight Hex Tool-Extra Long (For use with Torque Wrench) 1.25mmD Straight Hex Tool-Long (For use with Torque Wrench) 1.25mmD Straight Hex Tool-Short (For use with Torque Wrench) 2.0mmD Straight Hex Tool-Long 2.0mmD Straight Hex Tool-Short 2.5mmD Straight Hex Tool-Long (with retentive O-ring) 2.5mmD Straight Hex Tool-Short (with retentive O-ring) 3.0mmD Straight Hex Tool-Long GoDirectTM Implant Tool (Square connection for use with Ratchet or Torque Wrench) 3.0mmD Straight Hex Tool-Short 2.0mm Hex Tool-Long - New 2.0mm Hex Tool-Short - New 2.5mm Hex Tool-Long - New 2.5mm Hex Tool-Short - New 3.0mm Hex Tool-Long - New 3.0mm Hex Tool-Short - New

Hex Driver

Code HD1.25 HD2.0 HD2.5 HD3.0 GDID HD2.0SG HD2.5SG HD3.0SG

THT1.25S

HT1.25L

HT1.25

HT2.0

HT2.5

HT3.0

GDIT

HT1.25S

HT2.0S

HT2.5S

HT3.0S

HT2.0LG HT2.0SG

HT2.5LG HT2.5SG

HT3.0LG HT3.0SG

Latch head connection for use with Surgical Motor

Description 1.25mmD Hex Driver 2.0mmD Hex Driver 2.5mmD Hex Driver (with retentive O-ring) 3.0mmD Hex Driver GoDirectTM Implant Driver - (Latch connection for use with Surgical Motor) 2.0mm Hex Driver -Short - New 2.5mm Hex Driver -Short - New 3.0mm Hex Driver -Short - New

HD1.25 HD2.0 HD2.5 HD3.0 GDID HD2.0SG HD2.5SG HD3.0SG

Ancillary Instruments

Code R TW30 TW35 SSH2.5 FMD PAR LDRILL DE TWM ABH LDD LDDS LDT LDTS 1000-96-L

Description Ratchet 30Ncm Torque Wrench 35Ncm Torque Wrench 2.5mmD Stainless Steel Handle (with retentive O-ring) Fixture-Mount Drill (with retentive O-ring) Paralleling Tool 2.8/2.3 Locator Drill (2.3mmD) Drill Extender Multi-Setting Torque Wrench (15, 20, 25, 30, 35, 40, 45, 50 & 60Ncm) Analog Holder LOCATOR® Driver 29mm Handpiece LOCATOR® Driver 23mm Handpiece LOCATOR® Square Driver 21mm Wrench LOCATOR® Square Driver 15mm Wrench LOCATOR® Core Tool

R

TW30

TW35

SSH2.5

TWM

FMD

PAR

LDRILL

DE

ABH

LDD - LDDS

LDT - LDTS

1000-96-L

Surgical Trays

Code ST BST CST

Description Empty Surgical Tray for Spectra System Implants Basic Surgical Tray for Spectra System Implants Complete Surgical Tray for Spectra System Implants

ST

BST

CST

25


Surgical Drills 3.0mmD Implants

Code SD2.3 SD2.3S SD2.8 SD2.8S CBD3.2

SD2.3

26

CBD3.7

SD3.8

SD3.8S

CBD4.2

SD4.4

SD4.4S

CBD4.7

SD4.8

SD4.8S

CBD5.2

D5.1S

SD5.4

SD5.4S

Description 4.8/4.4mmD Step Drill with 6-16 markings 4.8/4.4mmD Step Drill with 6-10 markings Cortical Bone Drill for 5.2mmD Implants

5.7mmD Implants

Code D5.1 D5.1S SD5.4 SD5.4S CBD5.7

SD3.4S

Description 4.4/3.8mmD Step Drill with 6-16 markings 4.4/3.8mmD Step Drill with 6-10 markings Cortical Bone Drill for 4.7mmD Implants

Optional Drills

Code SD4.8 SD4.8S CBD5.2

SD3.4

CBD3.2

Description 3.8/3.4mmD Step Drill with 6-16 markings 3.8/3.4mmD Step Drill with 6-10 markings Cortical Bone Drill for 4.2mmD Implants

4.7mmD Implants

Code SD4.4 SD4.4S CBD4.7

SD2.8S

Description 3.4/2.8mmD Step Drill with 6-16 markings 3.4/2.8mmD Step Drill with 6-10 markings Cortical Bone Drill for 3.7mmD Implants

Optional Drills

Code SD3.8 SD3.8S CBD4.2

SD2.8

Description 2.3/2.0mmD Step Drill with 6-16 markings 2.3/2.0mmD Step Drill with 6-10 markings 2.8/2.3mmD Step Drill with 6-16 markings 2.8/2.3mmD Step Drill with 6-10 markings Cortical Bone Drill for 3.0 and 3.2mmD Implants

3.7mmD Implants

Code SD3.4 SD3.4S CBD3.7

SD2.3S

D5.1

Description 5.1mmD Straight Drill with 6-16 markings 5.1mmD Straight Drill with 6-10 markings 5.4/4.8mmD Step Drill with 6-16 markings 5.4/4.8mmD Step Drill with 6-10 markings Cortical Bone Drill for 5.7mmD Implants

CBD5.7


Spectra System Drill Seque nce 3.0mmD Tapered Implant Body Soft Bone Final

SD2.3

Dense Bone Final

Optional Bone Contour

SD2.8

CBD3.2

2.3/2.0mmD

2.8/2.3mmD

Soft Bone Final

Dense Bone Final

Optional Bone Contour

SD3.4

CBD3.7

3.7mmD Tapered Implant Body

SD2.3

SD2.8

2.3/2.0mmD

2.8/2.3mmD

3.4/2.8mmD

Soft Bone Final

Dense Bone Final

Optional Bone Contour

SD4.4

CBD4.7

4.7mmD Tapered Implant Body Optional

SD2.3 2.3/2.0mmD

SD2.8

SD3.4

2.8/2.3mmD

3.4/2.8mmD

SD3.8 3.8/3.4mmD

4.4/3.8mmD

Soft Bone Final

Dense Bone Final

Optional Bone Contour

SD5.4

CBD5.7

5.7mmD Tapered Implant Body Optional

SD2.3 2.3/2.0mmD

Optional

Optional

SD2.8

SD3.4

2.8/2.3mmD

3.4/2.8mmD

SD3.8 3.8/3.4mmD

SD4.4

SD4.8

4.4/3.8mmD

4.8/4.4mmD

D5.1 5.1mmD

5.4/4.8mmD

27


Complete Surgical Tray Contents

SD2.8

SD2.8S

CBD3.2

SD3.4

SD3.4S

CBD3.7

SD3.8

SD3.8S

CBD4.2

SD4.4

SD4.4S

CBD4.7

SD4.8

SD4.8S

CBD5.2

D5.1

D5.1S

SD5.4

SD5.4S

SD2.3 SD2.3S

Optional place for InterActiveTM tools (not included)

THT1.25

HT1.25

HT2.0

HT2.5

CBD5.7

HT3.0

lower level of surgical tray THT1.25S

HT1.25S

HT2.0S

HT2.5S

LDRILL

HT3.0S

R

FMD

28

HD1.25

HD2.0

HD2.5

HD3.0

PAR (4) SSH2.5

DE


Surgical Tray

Lid

Code ST SD2.3 SD2.3S SD2.8 SD2.8S CBD3.2 SD3.4 SD3.4S CBD3.7 SD3.8 SD3.8S CBD4.2 SD4.4 SD4.4S CBD4.7 SD4.8 SD4.8S CBD5.2 D5.1 D5.1S SD5.4 SD5.4S CBD5.7 THT1.25 THT1.25S HT1.25 HT1.25S HT2.0 HT2.0S HT2.5 HT2.5S HT3.0 HT3.0S HD1.25 HD2.0 HD2.5 HD3.0 FMD LDRILL DE R PAR (x4) SSH2.5

Surgical Tray Contents Description Empty Surgical Tray 2.3/2.0mmD Step Drill-Long 2.3/2.0mmD Step Drill-Short 2.8/2.3mmD Step Drill-Long 2.8/2.3mmD Step Drill-Short 3.2mmD Cortical Drill 3.4/2.8mmD Step Drill-Long 3.4/2.8mmD Step Drill-Short 3.7mmD Cortical Drill 3.8/3.4mmD Step Drill-Long 3.8/3.4mmD Step Drill-Short 4.2mmD Cortical Drill 4.4/3.8mmD Step Drill-Long 4.4/3.8mmD Step Drill-Short 4.7mmD Cortical Drill 4.8/4.4mmD Step Drill-Long 4.8/4.4mmD Step Drill-Short 5.2mmD Cortical Drill 5.1mmD Straight Drill-Long 5.1mmD Straight Drill-Short 5.4/4.8mmD Step Drill-Long 5.4/4.8mmD Step Drill-Short 5.7mmD Cortical Drill Hex Tools 1.25mmD Tapered Hex Tool-Long 1.25mmD Tapered Hex Tool-Short 1.25mmD Straight Hex Tool-Long 1.25mmD Straight Hex Tool-Short 2.0mmD Straight Hex Tool-Long 2.0mmD Straight Hex Tool-Short 2.5mmD Straight Hex Tool-Long 2.5mmD Straight Hex Tool-Short 3.0mmD Straight Hex Tool-Long 3.0mmD Straight Hex Tool-Short 1.25mmD Hex Drill 2.0mmD Hex Drill 2.5mmD Hex Drill 3.0mmD Hex Drill Ancillary Instrumentation Fixture-Mount Drill Locator Drill Drill Extender Ratchet Paralleling Tool 2.8/2.3 2.5mmD Stainless Steel Handle

Empty Tray

Inside

Complete Tray

Basic Tray

X X X X X X X X X X X X X X X X X X X X X X X

X X

X X X X X X X X X X X X X X

X

X X X X X X

X X X X X X X

X X X X X X

X X X X

29


Implant Direct Europe AG Hardturmstrasse 161 CH-8005 Zürich Tollfree Infoline 00800 4030 4030 www.implantdirect.eu

CAT-SPECTRA-EN, printed 02-2017

Spectra® System Catalog - EU Version  

Spectra® System Catalog - EU Version

Read more
Read more
Similar to
Popular now
Just for you