Page 1

AUDIO FOR EVERYONE

www.brooke-products.com


Audio for everyone


INH

AUDIO FOR EVERYONE

INSTALL ‘N’ HIRE SPEAKERS AND SUBWOOFERS Install ‘N’ Hire speakers meet and exceed the needs for both professional Fixed Installations and Audio Equipment Hire. Whilst lightweight & robust enough for the Hire market, INH Plywood cabinets offer superb audio peformance and the wide range of fixing options to suit Installations especially well.

Flexibility & Strength

Installation speakers need to be flexible enough install to a wide range of surfaces, but at the same time strong enough to cope with these different fixing methods. Cabinets are fully compatible with industry standard Powerdrive™ wall or ceiling brackets, and can be easily “flown” with wires. The internal strength of the cabinets must be uncompromising both in these situations. The INH Plywood

range work equally well as frontof-stage monitors or in a ground mounted floor stack. Finally, each cabinet comes complete with a 35mm top-hat on the base for use with subwoofers or tripod stands.

Top Sound

No matter how well speakers are made, they must deliver superb sound. These INH speakers are made from high quality plywood, rather than cheaper chipboard

or MDF. Each driver is optimised for the best possible sound and efficiency then crossovers and cabinet volumes are fine-tuned to give breathtaking performance. This can all be achived without breaking the bank.

Professional Speaker Cabinets

Speakers have to look great, but remain unobtrusive. Most installations require speakers

INH-8 8” Speaker

INH-10 10” Speaker

INH-12 12” Speaker

INH-15 15” Speaker

Frequency

70Hz - 20KHz

65Hz - 20KHz

65Hz - 18KHz

55Hz - 18KHz

Impedance

Power RMS

200W

250W

300W

600W

Sensitivity

93dB

95dB

97dB

101dB

Max SPL

116dB One 8” Bass with One 1” Tweeter

120dB One 10” Bass with One 1” Tweeter

125dB One 12” Bass with One 1” Tweeter

130dB One 15” Bass with One 1” Tweeter

Driver(s) Inputs

2 x Neutrik Speakon®

Mounting

Floor, 35mm top-hat

Enclosure Dimensions mm

Easy to Connect

Neutrik Speakon® sockets on the rear of the units ensure compatibility with standard connections from external amplifiers.

High Density 18mm Black Ply 455 x 295 x 270

530 x 355 x 320

575 x 400 x 370

700 x 470 x 445

14.0kg

17.0kg

21.0kg

32.0kg

INH-15S 15” Subwoofer

INH-18S 18” Subwoofer

18” No Grille Subwoofer

Frequency

50Hz - 250Hz

45Hz - 250Hz

45Hz - 250Hz

Impedance

Power RMS

500W

600W

600W

Sensitivity

98dB

100dB

100dB

Max SPL

112dB

116dB

116dB

Driver(s)

15” Bass

18” Bass

18” Bass

Weight

that blend into the background using them to simply deliver high quality sound - not be the focus of attention. However, cabinets will still be visible to the public, so they must look the part.

SUBWOOFER SPECIFICATIONS

Inputs

INH-18SNG

2 x Neutrik Speakon®

Mounting

Floor, 35mm top-hat

Enclosure

High Density 18mm Black Ply

Dimensions (mm) Weight (kg)

445 x 670 x 570

530 x 600 x 780

530 x 600 x 780

23.0

43.0

43.0

www.brooke-products.com


TM

Audio for everyone


XPRO

2

AUDIO FOR EVERYONE

PASSIVE / ACTIVE SPEAKERS & SUB WOOFERS The Brooke X-Pro™ series of amplifiers and loudspeakers became our best selling range when we launched them in 2008. They are installed in hundreds of venues throughout the UK and are a firm favourite among installers and retailers nationwide. During this time we spoke to many of our customers and asked them for suggestions for a new range. We are now delighted to announce the brand new 2015 X-PRO2™ range, the latest version. All the key X-PRO™ values are preserved, clear crisp sound, high reliability and robust cabinets made from slow growing plywood – all at a super price. The 2015 range comprises of 10”, 12” 15” top boxes along with our 15”, 18” and 2x18” X-PRO2™ subs. They can be used

Frequency Directivity Angle

as a front of house PA, localised in-fill reinforcement and portable applications for bands, discos, entertainers etc.

amplifier modules, stock levels and inventory costs are kept low, whilst being able to offer your customers a range of passive and active options. Hire companies too can add or remove amplifiers as required, ensuring an extensive hire list with low stock costs.

The most exciting feature of X-PRO2™ is the upgrade path that takes a passive top box and converts it into an active speaker. This is a superb option for installers and retailers alike. By stocking the standard passive speakers and holding a few

Speakers can be ordered as active or passive and amplifier modules can be ordered separately for

those wishing to carry out the rapid upgrade as required. We call this exclusive feature “BROOKE ACTIVATE™” and will carry the “ACTIVATE THE POWER™” logo. Originall launched at BPM & PRO AUDIO show, a full selection of stock is now available. Please contact Impact products, exclusive UK distributor for Brooke Pro Audio on 01604 664571

X-PRO²-10 10” Speaker

X-PRO²-12 12” Speaker

X-PRO²-15 15” Speaker

X-PRO²-15S 15” Subwoofer

XPRO²-18S 18” Subwoofer

XPRO²- Twin 18S 18” Twin Subwoofer

58Hz - 18KHz

57Hz - 18KHz

45Hz - 18KHz

40Hz - 250Hz

35Hz - 250Hz

32Hz - 250Hz

H90° x V50°

H90° x V80°

H90° x V50°

-

-

-

Impedance

Power RMS

250W

350W

700W

700W

700W

1400W

Power Peak

500W

700W

1400W

1400W

1400W

1400W

Sensitivity

97dB

98dB

102dB

98dB

99dB

104dB

Max SPL

97dB One 10” Bass with One 1” Tweeter

99dB One 12” Bass with One 1” Tweeter

104dB One 15” Bass with One 2” Tweeter

123dB

125dB

132dB

1 x 15” Bass

1 x 18” Bass

2 x 18” Bass

Driver(s) Inputs

2 x Neutrik Speakon

Mounting

Floor, 35mm top-hat

®

Enclosure Dimensions (mm) Weight (kg)

High Density 18mm Black Ply 489 x 300 x 261

580 x 375 x 325

675 x 435 x 390

690 x 460 x 465

690 x 560 x 571

1066 x 560 x 750

16.0

22.0

31.0

34.0

44.0

71.0

AMPLIFIER SPECIFICATIONS X-PRO 10 AMP Fits 10” Speaker Output Power THD @ 1KHz & 1dB below clipping Hum & Noise

300W @ 8Ω 0.50%

X-PRO 12/15 AMP Fits 12” & 15” Speaker 600W @ 8Ω 800W @ 4Ω 0.70%

90dB

92dB

35V / uS

35V / uS

Damping Factor

200

200

Input Connector

XLR Combo

XLR Combo

XLR Male

XLR Male

Slew Rate

Loop Thru Connector Limit & Clip Indictator

Red LED

Red LED

Power ON indictator

Green LED

Green LED

Treble / Bass EQ

YES

YES

Mic / Line Switch

YES

YES

240V / 50Hz

240V / 50Hz

YES

YES

235 x 120m

320 x 150

0.95

2.05

Operating Voltage Soft Start Dimensions (mm) Weight (kg)

www.brooke-products.com


Audio for everyone


B-MAX

AUDIO FOR EVERYONE

VERSION 2 ANALOG PROFESSIONAL AMPLIFIERS The Brooke X-Pro™ series of amplifiers and loudspeakers became our best selling range when we launched them back in 2008. They are installed in hundreds of venues throughout the UK and are a firm favourite among installers and retailers nationwide. Brooke Xpro amplifier models are all 480mm deep and are available in the two popular versions: the XPRO 1800 delivering up to 1800 watts and the XPRO 3000 delivering up to 3000 watts, both housed in a 3U high rackmount case and feature: recessed variable gain twin front panel controls; 8 LED status indicators; selectable

High Power Amplifiers

input sensitivity; XLR balanced line inputs and line outputs; terminal post and locking connectors for loudspeaker connection; stereo, mono and bridge mode operation; switchable audio filters; ergonomic handles and metal case with rackmount ears.

generating this massive energy the instant it is needed would require unfeasibly large supplies of mains power. So our engineers have taken a tried and trusted method of holding massive quantities of energy without the need for industrial sized mains supplies.

Many venues demand earthquake-like bass, delivered cleanly and repeatedly, hour after hour, night after night. Many of today’s large sub-bass loudspeakers are capable of this performance, but only if they are driven by an amplifier with massive instantaneous power delivery. But

B-MAX 1060 2 x 530W Amplifier

B-MAX 1680 2 x 840W Amplifier

B-MAX 2300 2 x 1150W Amplifier

B-MAX 4000 2 x 2000W Amplifier

8Ω, 1KHz, RMs, Stereo

2 x 350W

2 x 550W

2 x 750W

2 x 1200W

4Ω, 1KHz, RMs, Stereo

Output Power 2 x 530W

2 x 840W

2 x 1150W

2 x 2000W

Bridged mono 8Ω

1060W

1680W

2800W

4000W

Parallel 2Ω

1060W

1680W

2800W

4000W

Output Connections

2 Speakon for Stereo Bridge Output

Input Impedance

20kΩ / Balanced, 10kΩ / Un-balanced

Input sensitivity

>20kΩ

0.77V

Crosstalk

62dB

<-80dB

THD

<0.03%

>0.1% / 450W

SN Ratio Crosstalk @ Rated Output 8Ω/1KHz

>98dB

>100dB 62dB

Slew Rate Damping Factor Frequency Response

15V / uS

>60V / uS

>230

>300

20Hz-20kHz, ±1dB

20Hz-30kHz

Cooling System

TWO steps speed fan

Power Supply

AC : 220V / 240V 50Hz / 60Hz

Dimension (mm) Net Weight (kg)

(2U) 482 x 460.5 x 88 13.7

16

(3U) 484 x 555 x 132 18.3

38

www.brooke-products.com


AUDIO FOR EVERYONE

Reliable, Desirable, Affordable Brooke™ has gained an enviable reputation for performance, quality and reliability in its amplifier and loudspeaker systems. The UK design team have achieved a striking balance between rugged products and competitive prices. From our entry level ABS speakers right up to our stadium line array, Brooke™ offers a unique range for almost any venue. Best of all, Brooke™ also matches your budget at a time where value for money is everything. Our range includes updated drivers in many models, offering improved response and better overall performance. The lightweight amplifier range is extended to offer more new models and our active loudspeakers are proving a great success with our demanding customers. The legendary Brooke™ INH range, developed specifically for the Install and Hire market is packed with features, making INH our best selling range. Whatever your requirement, whatever your venue, you can rely on Brooke for the answer - at a price you and your clients can afford.

Distributed by:

www.brooke-products.com www.facebook.com/BrookeProducts ©2015 Brooke Products (Europe) Ltd. We have a policy of continual product development and the information contained herein may not reflect the latest version available for sale. This information and specification should be used as an indication only and it is the buyer’s sole responsibility to ensure any product offered for sale will properly meet the buyer’s requirements before making a purchase. E&OE.

28/08/15

Brooke Brochure  
Brooke Brochure  
Advertisement