Issuu on Google+

International Materials & Equipment Exchange, Inc.


IM.x................................................................. International Materials & Equipment Exchange Inc. “Changing the world, one revolutionary product at a time”

Index : 1) Introduction to IM.x...……………………...…………..…………………...

3

2) Welcome to the IM.x Stark Vise Line™……...……..………………………

6

3) Introduction to the Stark Vise Line™……..………….....…………………..

7

4) Tech Sheets for Stark Vise : Sa, Sa1 & Sa2..……..….………....…….........

12

5) Photographs, Sa : Multi-Mode, 2-Axis Universal Standard Vise……..……

17

6) Photographs, Sa1 : Multi-Mode, 3-Axis Sine Vise………….…...….……... 19 a)

Sa1, 2 - Axis (Universal Standard Vise - USV) mode….......................

19

b) Sa1, 3 - Axis mode…...………….…………...................……………..

20

c)

21

Sa1, 2 - Axis (USV, Reversed Head Bar Clamp) mode..…..………….

7) Photograph, Sa2 : Multi-Mode, 4-Axis Compound Sine Vise…….……..… 22 a)

Sa2, 2 - Axis (Universal Standard Vise) mode…........………………..

22

b)

Sa2, 3 - Axis mode...……..................…………..……………………..

23

c) Sa2, 4 - Axis compound mode...….……...………...………………….

24

8) Welcome to the IM.x Torq Line Products™…………………..………………….

25

9) Introduction to the Torq Line Products™…….…………....……………….. 26 10) Tech Sheet for Torq-Itz™………………….….………..…………………...

30

11) Photograph of Torq-Itz™…………………..…………..…………………… 31 12) Welcome to IM.x Blu10™………………………………….………………. 32 13) Introduction to Blu10™..……………………...….………….……………...

33

10260 SW Greenburg Rd. Suite 400  Portland OR 97223  Ph: 800.605.0038  Fx: 503.406.2138  Em: Info@I-Mx.net


“Changing the world, one revolutionary product at a time�


Welcome to

3


“Changing the world, one revolutionary product at a time�


IM.x Product Lines

Introduction to IM.x International Materials & Equipment Exchange, Inc.

All About IM.x 1)

2)

3)

4)

5)

IM.x was created for the sole purpose of representing to market, unique, truly revolutionary, highdemand industrial products and materials. Each product, or series, represents an entirely new industrial class or improves upon an existing class to such a degree that it profoundly and permanently alters the status quo. IM.x will only manufacture and/or market products that it currently owns or controls. The company has numerous additional products in the 2014 and 2015 development pipeline. Although the company may represent or otherwise acquire other products in the future it has no inherent need to do so. The existing product roster presents IM.x with significant financial credentials, present and future. With individual industrial devises and materials IM.x is fervently dedicated to both the inventor and the inventions. These products are significant in industrial history. Inventions do not create themselves. All IM.x products are either individually patented with one or more patents or are “patent(s) pending” devices. All are USPTO and PCT verified, minimum.

Products & Marketing 6)

7)

8)

9)

10)

11)

IM.x devices are “stand alone” industrial products, individually or in series, and each yields enormous marketing power in its’ own right. Many of these devices are constructed of truly revolutionary and exclusive IM.x materials. These materials are not available in any competing product. Generally, the market for IM.x products is global though some products apply to the U.S. market initially. Some market tests occur regionally. IM.x products improve upon its’ entire class of industrial devices and materials and are signature inventions. They are ferocious competitors in the market place. IM.x products are the ultimate in quality and many are guaranteed for life. They are the best, the icon of their industrial class and will remain so over time. These products were specifically designed from the outset to rule their market. IM.x product lines contain inventions that create an entire new industrial class of equipment. These products, while incorporating the above with world wide demand, speak for themselves. In a word, they are amazing. All IM.x products are impeccable in design and engineering achievement. Each new product is capable of winning international recognition for engineering excellence in industrial design. Therefore, each year IM.x will submit a product for consideration in world competition for various industrial design awards. In 2014 that product will be the Stark Vise. 4


“Changing the world, one revolutionary product at a time�


IM.x Product Lines 12)

13)

Typical IM.x custome ers are machine manufaccturers (and their t distributtors) and industrial tool distributo ors worldwid de. All IM.x products p are represented d via direct distribution marketing m thro ough manufaccturers’ repre esentatives. Primary P saless are wholesaale through national, n regional and loccal distributiion networkss and trading g companies, all continents, in block amounts a on a monthly baasis. IM.x is not a retail saales outlet oth her than thro ough its own eCommerce e sites. With the exceptio on of trade sho ows, IM.x do oes not repre esent its prod ducts directlyy to the streett.

Current Products Stark Vise Line L ™ 14)

The Stark Vise Line in ntroduces revvolutionary new n technolo ogies in the history h of both the industtrial and er vise. Thesse are a multi-componentt line of high precision visses and attacchments, eacch of consume which in ncorporates and a utilizes th he new techn nologies.

Torq-Itz™ 15)

Torq Line introduces a revolution nary new tech hnology, and d attendant product p line, in the historyy of ucts create a new class off industrial eq quipment occcupied torque sensing devicces. As such, these produ solely byy itself.

IM.x Blu10 16)

With the e above new products IM M.x introduce es an exclusivve and revolu utionary ultraa high densityy ballistic alloy a steel. In all respectss Blu10 is me etallurgically superior to the t current benchmarks b o tool of steels. Blu10 B allows IM.x devicess to be utilize ed in corrosivve environments and also o in sterile environm ments such as a the manufaacture of medical equipm ment.

Future Pro oducts (20 014 - globaal sales) 17)

Stark Visse Line, advanced techno ology consum mer vise line – multiple prroducts. Entiirely new, “R Radial Magnetic Impulse Injjection” tech hnology, multtiple productts – hardware and softwaare. Entirely new, advanced technologyy, Bee habitaat (industriallyy produced) – multiple products p both h field and faactory. And num merous otherrs to be anno ounced….

n logo, product specificity and d domain names are the sole prop perty of IM.x and are not licensed for any other purrpose Note : The IM.x name, except under the jurisdictiion of the parent company.

hout notice All IM.x information is subject to change with 10260 SW W Greenburg Rd d. Suite 400 Po ortland, OR 9722 23  Ph: 800.605.0038  Fx: 503.406.2138  Em mail: Info@I-Mx..net

5


“Changing the world, one revolutionary product at a time�


Welcome to

Stark Vise Line

™

6


Stark Vise Line “The Revolution Vise” •

No Main Screw

No Thrust Bearing

No Seals

No Rings

No Springs

No More Repair Kits!


Introduction to Stark Vise Line™

Intro oducttion to o the Stark Vise Line

“Worlds Finest Production Vise”

A few words of caution about the t information contain ned herein : The follo owing inform mation regarding the “S Stark Vise Liine - Sa, Sa1 & Sa1B/Saa2 & Sa2B” and accessorry attachme ents, collectiively, is prop prietary and d therefore, with the exxception of _________________________ witth _______________________, (et al) and only as a it relates to our futurre business relationship p, cannot be e dispensed or otherwisse disseminated to anyyone for any reason r witho out prior exxpress writte en consent of o IM.x Corporation. These de evices are re evolutionaryy. Therefore e, it is in ourr collective interests i to guard with zeal their con nfidentiality prior to the e start of pro oduction.

Stark Vise V Line Overvie ew : 1) Description: The Stark Vises are a combinattion, multi-mode, ratchet vises in 2 & 3 axis mode es (Sa, Sa1& S Sa1B) and a 2 & 3 & 4 axis modess (Sa2 & Sa2B). a)

This is the “Revolution Vise” V (as in “ccombination””, “multi-mod de”, “reversib ble head”, “ratchet” visse) per rumo or in the industry, and :

No Main Sccrew. No Beearings. No Seals. S No Rin ings. No Spri rings. and N o M o r e R e p a i r K i t s ! Old styyle screw typ pe vises are now n outdated ed and inefficcient by comparison n. b)

These vises were designed from the outset to inccorporate as many as 16 precision engineered attachmentss. These attachments are multi-compo onent work holding h devicces in their own rig ght and are exclusive e to the t Stark Vise Line.

c)

Stark vises are a unique. Until U now, no o such comp parable vises exist. These are the finesst

production industrial visses available, anywhere. d)

The 16 diffe erent attachm ments are equ ually unique as compared d to existing work holding g devices. Ind deed, IM.x is currently preparing indivvidual patentt applicationss for seven of o these attach hments.

e)

These comb bination visess, in any operational mod de, are engineered to maintain workin ng th h calibrations to 100,000 inch, while remaining virtually harmo onic vibration free. With h or ndards. The erefore : high h precision, near-perfect n p product repeeatability is without stan

unmatched d by any otheer production n vise. f)

Internal harm monic vibration (all vises,, entire workking range, all modes) : NONE

Stark vises utilize u uniquee technologie ies to nullify cross–device c e internal harrmonic vibrattion. g)

All vises are true to squaare at .0002thh inch or less.


Stark Vise Line “The Revolution Vise” •

No Main Screw

No Thrust Bearing

No Seals

No Rings

No Springs

No More Repair Kits!


Introduction to Stark Vise Line™ h)

Clamping fo orce is infinite ely adjustable at 0 – 10,0 000 ft. lbs. (m min.) on the smaller vises and 0 – 18,000 ft. lbs. (min.) on the large e vises.

i)

Jaw Lift : At maaximum clamping forces, Stark Vise Line patented d ratchet technology provides a miniimum of 4,00 00 ft. lbs. of down-force d t the movab to ble jaw(s). Th herefore, the e movab ble jaws of any Stark Line e vise :

1)

(a)

Will not lift - und der any compression load d, and, (b) Haas no lateral deflection - at a anyy compressio on load.

No other production “Screw “ Typee” vise in indu ustrial historyy can reliablyy make this claim! c j)

Sa, Sa1 & Saa2 (“A” visess) provide inffinite adjustm ment to a maxximum jaw opening o of 14 4 inches. The “B” vises pro ovide infinite e adjustment to maximum m jaw openings of 16 and d 20 inches. 1)

Sa2 & Sa2B also in ncorporates compound c tiilt angles to 50/50 5 degree es (360 degrree rotatio on) for work in all angles.

2)

Time interval i for sh hift between universal staandard (2-axiis) vise to sine (3-axis) vise is 30 secconds.

Sa2 & Sa2 2B are true, combined, multi-mode, m 2 3, & 4 axis, industrial raatchet vises. These are th 2, he only visess of their type and each one o establish hes a new ind dustrial threshold of precision – near

perfect reepeatability! The “B” vises v (sister vises v to Sa, Saa1 and Sa2) include i all off the above while w increassing hold cap pacity to 20". k)

All Stark Line vises are adjusted a via patented p ratcchet technolo ogy. Ratchett adjustmentss, 0 – e in 3/4 inch h increments (or multipless) with infinitte adjustment 14” (0 – 20””, B vises) are between 3/4” idents.

l)

Time intervaal for adjustm ment, Sa, Sa1 & Sa2, 0 to 14” to 10,00 00 ft. lbs. (minn.) is 6 second ds.

m)

Time intervaal for adjustm ment, “B” vise es, 0 to 20” to t 18,000 ft. lbs. (min.) is 9 seconds.

n)

All Stark Line vises incorrporate a new w patented te echnology th hat allows the e mobile clamping he ead to be fullly reversible. 1)

Time interval i to reverse head iss 15 secondss.

2)

Reversse side of he ead is “V” chaamfered for pipe p or dowe el holding to o 1.7” diametter. Custom “V” chamfers are availlable.

3)

Jaw Faaces : All Stark Line vises feature interrchangeable jaw faces.


Stark Vise Line “The Revolution Vise” •

No Main Screw

No Thrust Bearing

No Seals

No Rings

No Springs

No More Repair Kits!


Introduction to Stark Vise Line™ o)

Constructio on – Premium m Blu10 Linnes : 1)

p)

q)

1)

2)

3)

4)

5)

Blu10 Line :

All vise compon nents and atttachments of the premium line are nstructed of IM.x Blu10 metal m alloy. This T is a new w ballistic allo oy con witth unparallele ed hardness and stability.. IM.x Blu10 0 provides ovver five e times the faatigue streng gth of D-2 me etal alloy, a current c ben nchmark of tool t steels. Blu10 B allows all vises of th he premium line to accommodaate both corro osive and no on-corrosive environment e ts. nce sterilized d, all Blu10 vises can be utilized u contin nuously in th he On maanufacture off medical equ uipment in stterile environ nments. All vise v com mponents an nd attachmen nts of the Blu u10 line are “air-hardened “ d” to an amazing 63 Rockwell.

Weights : 1) Sa-614 4 & Sa1-614 2) Sa2- 614 6 Dimensions : 1) Sa-614 4 & Sa1-614 2) Sa2- 614 6

: 70 - 85 5 lbs. assemb bled, net. : 151 lb bs. assembled d, net : 7.5”/8 8.3” (w) x 15..8” (l) x 5.75”” (h), bed he eight is 2.2”/3 3.3” : 12.5” (w) x 15.8” (l) ( x 8.75” (h)), bed heightt is 6.3”

First an nd foremost,, Stark Line vises v are labo or saving devvices of incredible accuracy producing g near-perfect repeatability. Examplle : With Starrk sine vises, Sa1 and Sa2 2, angle bloccks are no lon nger required d. As a result, many milling machine e set-up funcctions for ang gle operation ns are reduce ed in labor tim me by as mu uch as two ho ours, each fu unction. Stark Line L vises and d accessory attachments are incompaarable in the market placce in cost recove ery and money earned ovver time. In shee er working dynamics, d we e believe the Stark Vise Liine vises are conceptuallyy and techno ologically witthout peer bo oth currentlyy and historiccally. As work holding de evices now available, a thiss is arguably one of the most m (if not th he most) i vise es and attend dant work ho olding device es - in indus strial historyy ! advancced lines of industrial

Old style screw type vises are now outdated and inefficient by comparison. 2) All research and development d t is complete e. a)

b)

All engineerring and design files are complete c for the Stark Visse, Sa, Sa1 & Sa2 (primarry devices, prim mary technologies). Final accuracy ce ertifications and a setup forr initial produ uction are in proce ess. All mass pro oduction castting dies are designed, en ngineered an nd manufactu ured by IM.x. Mass production dies fo or the primaryy technologyy devices are in productio on and nearin ng completion..


Stark Vise Line “The Revolution Vise” •

No Main Screw

No Thrust Bearing

No Seals

No Rings

No Springs

No More Repair Kits!


Introduction to Stark Vise Line™ 3)

Proto otypes : a)

4)

5)

We expect final f prototyp pes (IM.x Blu u10 metal, investment cast main components) by the third week in March 201 14. Following will be a final certification mini-run on or about the third week of o April 2014 4.

Produ uction : a)

First producction timetable is set for the third wee ek in May 2014.

b)

Total production is curre ently limited to approximately 1,750 assembled a un nits per month, after ramp-u up.

c)

We expect to t be at the Chicago tool show in Sep ptember.

Overvview of demand : a)

Stark Vise Line productss are exceptio onally useful when paired d with both small s and larg ge ( co ontrolled) typ pe milling maachines. Currrent sales of new CNC scale CNC (computer machines, world w wide, number n in the e - thousandss of units perr year.

b)

Virtually all CNC machin nes, new or otherwise, o re equire work holding h devicces. A signifiicant percentage of which wo ould be indusstrial vises. Certainly, co ombination, multi-mode (no ( need to interchange i vises), ratche et vises that provide neaar instantaneo ous adjustme ent at 100,00 00th inch accu uracy with viirtually no internal harm monic vibration. Result : near perfect ct repeatability ty. Truly revolutionary techn nology.

c)

Existing indu ustrial milling g machines operating o in the industry today t (world wide) numb ber in the millions of units.

It is certain that evvery machine e shop operaator, owner and/or a manu ufacturer (etcc.) is intereste ed in saving g two man-hours set-up time t for each h and every separate s angle process in nvolving a visse ! It is also a certain th hat every maachine shop operator, o ow wner and/or manufacturer m r (etc.) is intere ested in savin ng the constaant recurring costs of vise e repair partss required byy screw-type indusstrial vises. 6) Paten nts : a)

These are fu ully U.S. pate ented vises co onsisting of twelve t USPTO listed indivvidual components.

b)

USPTO umb brella patent number for the Sa1 (prim mary vise, primary techno ologies) is U.S. Patent # 7,8 854,072 B2.

c)

The applicattion for patents for the Saa2 (2nd primaary technolog gy) vise is complete.

d)

In addition, we are proceeding with preparationss to file PCT (Patent Coop peration


Stark Vise Line “The Revolution Vise” •

No Main Screw

No Thrust Bearing

No Seals

No Rings

No Springs

No More Repair Kits!


Treaty – 117 7 countries, all a continents) combined applicationss as well. Braazil, Mexico, and Canada are being filed separately. s W are also planning We p sepaarate patent applications for certain coun ntries of the Middle East. e)

Final engine eering docum mentation forr patent applications for numerous n of the accessory attachmentss are underw way.

Our inten nt is to contro ol, as best we w can, both the t patent an nd sale of the e products worldwide. w W We will proce eed to great length in purrsuit of this goal. g f)

Patent attorney is Mark S. Hubert

Note :

Regarding IM M.x products, s, you may co ontact Mr. Hubert H by app pointment ass arranged a thro rough our off ffices.

7) Price Guide, Blu10 Line : a) b) c) d)

Sa Multi-Mo ode 410 Sa Multi-Mo ode 614 Sa Multi-Mo ode 816 Sa Multi-Mo ode 820

( 2 axis @ 4” 4 x 10” ) ( 2 axis @ 6” 6 x 14” ) ( 2 axis @ 8” 8 x 16” ) ( 2 axis @ 8” 8 x 20” )

: : : :

$ 557.00 $ 795.00 $ 1.495.00 $ 2,495.00

e) f) g) h)

Sa1 Multi-M Mode 410 Sa1 Multi-M Mode 614 Sa1 Multi-M Mode 816 Sa1 Multi-M Mode 820

( 3 axis @ 4” 4 x 10” ) ( 3 axis @ 6” 6 x 14” ) ( 3 axis @ 8” 8 x 16” ) ( 3 axis @ 8” 8 x 20” )

: : : :

$ 2,306.00 $ 3,295.00 $ 4,382.00 $ 7,769.00

i) j) k)

Sa2 Multi-M Mode 614 Sa2 Multi-M Mode 816 Sa2 Multi-M Mode 820

( 4 axis @ 6” 6 x 14” ) ( 4 axis @ 8” 8 x 16” ) ( 4 axis @ 8” 8 x 20” )

: : :

$ 4,995.00 $ 6,645.00 $ 8,769.00

Note 1 :

The T above dimensions re epresent jaw width and maximum m ope ening.

Note 2 :

“B” (20”) vises at 10” and d 12” width are a custom units u manufactured and priced per order.

8) IM.x is i nearing larrge scale pro oduction of both b the Sa & Sa1 vise line es. Remainin ng vises will follow shortlly. Per the above, it is im mperative that everyone re eviewing the e Stark Vise Line L abide byy the anti-d disclosure and d anti-compe etition agreem ments includ ded herewith. 9) Unfortunately, we estern patentts have little meaning m in some s third world w countrie es. Therefore e, regarding the Starrk Vise Line, we will ask again a that you keep our communicati c ons discreet.. 10) These e inventions are real and amazing, inccredible actu ually. But the e central focu us is, and sho ould be, on the invento or. A true mechanical en ngineering ge enius. We ap ppreciate the e association and we ap ppreciate the e numerous opportunities o s this gentlem man has brou ught to our door. d Note : The Stark S Vise name, logo, product spe ecificity and domaain names are the e sole property off IM.x and are no ot licensed for anyy other purp pose except under the jurisdiction n of the parent co ompany.

mation is subjectt to change with hout notice. IM.x inform


Stark Vise Line “The Revolution Vise” •

No Main Screw

No Thrust Bearing

No Seals

No Rings

No Springs

No More Repair Kits!


Introduction to Stark Vise Line™ Sa (2-Axis, only) Tech Sheet

Stark Vise Line™ “World’s Finest Production Vise”

S

S US Patent #7,854,072 B2 World Wide PCT Pending

1. 2.

3. 4. 5. 6. 7. 8.

The “Revolution Vise”, an all new class of industrial vises by Stark Vise Line™ from IM.x. Reversible Head, Ratchet Vises @ Jaw Openings : 0-14”, 0-16”, 0-20” a. Sa is a Universal Standard (2-axis, only) Multi-Mode, Ratchet Vise with reversible head. b. All Stark Vises include a Fully Reversible Mobile Clamping Head for holding round bar stock. Specialized Accessories and Work Holding Devices : 7 Each Composition : IM.x Blu10 Alloy @ 63 Rockwell IM.x Blu10 : Super dense, ballistic alloy steel @ 5 times the fatigue strength of D-2 ! Adjustment Mechanism : Ratchet @ 0 to 14” & 0 to 20” in 3/4” (or multiples) increments. a. Adjustability between 3/4” Increments : Infinite Maximum Clamping Force : “A” vises : 10,000 lbs. (min.), “B” vises : 18,000 ft. lbs. (min.) Jaw Lift : Stark Vise Line ratchet technology provides over 4,000 ft. lbs. down-force to the movable jaw.

The movable jaw(s) of any Stark Line vise have “0” lift and “0” deflection at any compression load. 9. 10. 11. 12.

13. 14. 15. 16. 17.

Jaw Faces : All Stark Line vises feature interchangeable jaw faces. Time interval for adjustment “A” vises, 0 ► 14” ► 10,000 ft. lbs. (min.) Clamping force : 6 seconds Time Interval for adjustment “B” vises, 0 ► 20” ► 18,000 ft. lbs. (min.) Clamping force : 9 seconds Mobile Clamping Head Reversibility : Fully Reversible (without disassembly). a. Time interval to reverse head : 15 seconds b. Reverse head is “V” chamfered for pipe or dowel holding to 1.7” d. Working Calibration Range : Precise to 100,000th inch. Near perfect repeatability ! Square : All vises are true to square @ .0002th inch or less. Internal Harmonic Vibration (all vises, entire working range, all modes) : NONE Dimensions, Sa-614 (2 – Axis Model) : 7.5”(w) x 15.5”(l) x 4.65”(h), Bed height : 2.2”. Weight : 70 lbs. net.

18. No Main Screw, No Bearings, No Seals, No Rings, No Springs : NO MORE REPAIR KITS !!

All IM.x information is subject to change without notice

12


Stark Vise Line “The Revolution Vise” •

No Main Screw

No Thrust Bearing

No Seals

No Rings

No Springs

No More Repair Kits!


Sa1 (2 & 3 Axes) Tech Sheet

Stark Vise Line™ “World’s Finest Production Vise” S

S

S

US Patent 7,854,072 B2 World Wide PCT Pending

1. 2.

3. 4. 5. 6. 7. 8.

9. 10. 11. 12. 13. 14.

15. 16. 17. 18. 19. 20.

The “Revolution Vise”, an all new class of industrial vises by Stark Vise Line™ from IM.x. Combination, Multi-Mode, Reversible Head, Ratchet Vises @ Jaw Openings : 0-14”, 0-16”, 0-20” a. All Stark Vises convert to a Universal Standard (2-Axis mode) Vise. b. Sa1 is a 0-50° (360°) angle (3-Axis) Multi-Mode, Ratchet Sine Vise with reversible head. c. All Stark Vises include a Fully Reversible Mobile Clamping Head for round bar stock. Specialized Accessories and Work Holding Devices, Exclusive to Sa1 & Sa1 “B” vises : 7 Each Composition : IM.x Blu10 Alloy @ 63 Rockwell. IM.x Blu10 : Super dense, ballistic alloy steel @ 5 times the fatigue strength of D-2 ! Adjustment Mechanism : Ratchet @ 0 to 14” & 0 to 20” in 3/4” (or multiples) increments. a. Adjustability between 3/4” Increments : Infinite Jaw Faces : All Stark Line vises feature interchangeable jaw faces. Maximum Clamping Force : “A” vises : 10,000 ft. lbs. (min.), “B” vises : 18,000 ft. lbs. (min.) Jaw Lift : Stark Vise ratchet technology provides over 4,000 ft. lbs. down-force to the movable jaw.

The movable jaw(s) of any Stark Line vise have “0” lift and “0” deflection at any compression load. Time interval for adjustment “A” vises, 0 ► 14” ► 10,000 ft. lbs. (min.) Clamping force : 6 seconds Time Interval for adjustment “B” vises, 0 ► 20” ► 18,000 ft. lbs. (min.) Clamping force : 9 seconds Time Interval for shift between Universal Standard Vise (2-Axis) & Sine vise (3-Axis) : 30 Seconds Maximum Angle of lift for Sine functions : 50° (Allows 360 degree rotation). Mobile Clamping Head Reversibility : Fully Reversible (without disassembly). a. Time interval to reverse head : 15 seconds b. Reverse head is “V” chamfered for pipe or dowel holding to 1.7” d. Working Calibration Range : Precise to 100,000 inc (with or without standards). a. Near perfect repeatability ! Square : All vises are true to square @ .0002 inch or less. Internal Harmonic Vibration (all vises, entire working range, all modes) : NONE Dimensions : Sa1 (2 - Axis mode) : 8.3”(w) x 15.5” (l) x 5.75” (h), Bed height : 3.3” Weight : Sa1 (without accessory devices) : 85 lbs. net. No Main Screw, No Bearings, No Seals, No Rings, No Springs : NO MORE REPAIR KITS !! th

th

All IM.x information is subject to change without notice.

13


Stark Vise Line “The Revolution Vise” •

No Main Screw

No Thrust Bearing

No Seals

No Rings

No Springs

No More Repair Kits!


Sa2 (2 & 3 & 4 Axes) Tech Sheet

Stark Vise Line™ “World’s Finest Production Vise”

S

S

US Patent # 7,854,072 B2 World Wide PCT Pending

1. 2.

3. 4. 5. 6. 7. 8. 9. 10 11. 12. 13. 14.

15. 16. 17. 18. 19. 20.

The “Revolution Vise”, an all new class of industrial vises by Stark Vise Line™ from IM.x. Combination, Multi-Mode, Reversible Head, Ratchet Vises @ Jaw Openings : 0-14”, 0-16”, 0-20” a. All Stark Vises convert to a Universal Standard (2-Axis mode) Vise. b. Sa2 is a 0-50°/0-50° (360°) Compound Angle (4-Axis) Multi-Mode, Ratchet Sine Vise. c. All Stark Vises include a Fully Reversible Mobile Clamping Head for round bar stock. Specialized Accessories and Work Holding Devices, Exclusive to Sa2 & Sa2 “B” vises : 7 Each Composition : IM.x Blu10 Alloy @ 63 Rockwell. IM.x Blu10 : Super dense, ballistic alloy steel @ 5 times the fatigue strength of D-2 ! Adjustment Mechanism : Ratchet @ 0 to 14” & 0 to 20” in 3/4” (or multiples) increments. a. Adjustability between 3/4” increments : Infinite Jaw Faces : All Stark Line vises feature interchangeable jaw faces. Maximum Clamping Force : “A” vises : 10,000 ft. lbs. (min.), “B” vises : 18,000 ft. lbs. (min.). Jaw Lift : Stark Vise ratchet technology provides over 4,000 ft. lbs. of down-force to the movable jaw.

The movable jaw(s) of any Stark Line vise have “0” lift and “0” deflection at any compression load. Time interval for adjustment “A” vises, 0 ► 14” ► 10,000 ft. lbs. (min.) Clamping force : 6 seconds Time Interval for adjustment “B” vises, 0 ► 20” ► 18,000 ft. lbs. (min.) Clamping force : 9 seconds Time Interval for shift between Universal Standard Vise (2-Axis) & Sine vise (3-Axis) : 30 Seconds Maximum Angle of lift : 50°/50° (360 degree rotation) for work in all angles. Mobile Clamping Head Reversibility : Fully Reversible (without disassembly). a. Time interval to reverse head : 15 seconds b. Reverse head is “V” chamfered for pipe or dowel holding to 1.7” d. Working Calibration Range : Precise to 100,000th inch (with or without standards). a. Near perfect repeatability ! Square : All vises are true to square @ .0002th inch or less. Internal Harmonic Vibration (all vises, entire working range, all modes) : NONE Dimensions : Sa2 (2 - Axis mode) : 12.5” (w) x 15.5” (l) x 8.75”(h) Bed height : 6.3”. Weight : Sa2 (without accessory devices) : 151 lbs. net. No Main Screw, No Bearings, No Seals, No Rings, No Springs : NO MORE REPAIR KITS !! All IM.x information is subject to change without notice.

14


Stark Vise Line “The Revolution Vise” •

No Main Screw

No Thrust Bearing

No Seals

No Rings

No Springs

No More Repair Kits!


Introduction to Stark Vise Line™ Part Numbers : Sa1

Item # Part # 14 13 12 11 10 9 8 7 6 5 4 3 2 1

1010 1020 1029 1030 1040 1050 1060 1070 1080 1090 1100 1120 1120 1130 3140 3150 3160

Identification Assembled View Main Body (machined product) Main Body (cast product) Base Plate Jaw (revolving head) Jaw Shaft Jaw Lock (ratchet lock) Hinge Roll Bearing Roll Sine Bar Pin Sine Bar Caps Right Side Bar (cam arm) Left Side Bar (cam arm) Washers (one lot bundle) Vise Locator (common, included with each Sa, Sa1 or Sa2 pkg.) Vise Side Bar (common, included with each Sa, Sa1 or Sa2 pkg.) Vise “V” Blocks (common, included with each Sa, Sa1 or Sa2 pkg.)

10260 SW Greenburg Rd. Suite 400  Portland, OR 97223  Ph: 800.605.0038  Fx: 503.406.2138  Email: Info@I-Mx.net

15


Stark Vise Line “The Revolution Vise” •

No Main Screw

No Thrust Bearing

No Seals

No Rings

No Springs

No More Repair Kits!


IM.x Stark Vise Line™ Sa1-614 Dimensions

Note: all dimensions are in inches

S

IM.x information is subject to change without notice. 10260 SW Greenburg Rd. Suite 400 • Portland, OR 97223 • Ph: 800.605.0038 • Fx: 503.406.2138 • Em: Info@I-Mx.net

16


Stark Vise Line “The Revolution Vise” •

No Main Screw

No Thrust Bearing

No Seals

No Rings

No Springs

No More Repair Kits!


I n t r o d u c t i o n t o Stark Vise Line ™

Photograph of the Sa, 2-Axis Stark Vise Sa (2-Axis, Universal Standard Vise - USV)

S Patent: US 7,854,072 B2 World Wide PCT Pending

All IM.x information is subject to change without notice. 10260 SW Greenburg Rd., Suite 400 • Portland OR 97223 • Ph: 800.605.0038 • Fx: 503.406.2138 • Em: Info@I-Mx.net 17


Stark Vise Line “The Revolution Vise” •

No Main Screw

No Thrust Bearing

No Seals

No Rings

No Springs

No More Repair Kits!


I n t r o d u c t i o n t o Stark Vise Line ™

Photograph of the Sa, 2-Axis Stark Vise Sa (Reversed Head Bar Clamp)

S Patent: US 7,854,072 B2 World Wide PCT Pending

All IM.x information is subject to change without notice. 10260 SW Greenburg Rd., Suite 400 • Portland OR 97223 • Ph: 800.605.0038 • Fx: 503.406.2138 • Em: Info@I-Mx.net 18


Stark Vise Line “The Revolution Vise” •

No Main Screw

No Thrust Bearing

No Seals

No Rings

No Springs

No More Repair Kits!


I n t r o d u c t i o n t o Stark Vise Line ™

Photograph of the Sa1, 3-Axis Stark Sine Vise Sa1 (2-Axis, Universal Sandard Vise Mode)

S Patent: US 7,854,072 B2 World Wide PCT Pending

All IM.x information is subject to change without notice. 10260 SW Greenburg Rd., Suite 400 • Portland OR 97223 • Ph: 800.605.0038 • Fx: 503.406.2138 • Em: Info@I-Mx.net 19


Stark Vise Line “The Revolution Vise” •

No Main Screw

No Thrust Bearing

No Seals

No Rings

No Springs

No More Repair Kits!


I n t r o d u c t i o n t o Stark Vise Line ™

Photograph of the Sa1, 3-Axis Stark Sine Vise Sa1 (3-Axis, Sine Vise Mode)

S

Patent: US 7,854,072 B2 World Wide PCT Pending

All IM.x information is subject to change without notice. 10260 SW Greenburg Rd., Suite 400 • Portland OR 97223 • Ph: 800.605.0038 • Fx: 503.406.2138 • Em: Info@I-Mx.net

20


Stark Vise Line “The Revolution Vise” •

No Main Screw

No Thrust Bearing

No Seals

No Rings

No Springs

No More Repair Kits!


I n t r o d u c t i o n t o Stark Vise Line ™

Photograph of the Sa1, 3-Axis Stark Sine Vise Sa1 (2-Axis, Reversed Head Bar Clamp Mode)

S Patent: US 7,854,072 B2 World Wide PCT Pending

All IM.x information is subject to change without notice. 10260 SW Greenburg Rd., Suite 400 • Portland OR 97223 • Ph: 800.605.0038 • Fx: 503.406.2138 • Em: Info@I-Mx.net 21


Stark Vise Line “The Revolution Vise” •

No Main Screw

No Thrust Bearing

No Seals

No Rings

No Springs

No More Repair Kits!


I n t r o d u c t i o n t o Stark Vise Line ™

Photograph of the Sa2, 4-Axis Stark Compound - Sine Vise Sa2 (2-Axis Mode)

S

Patent: US 7,854,072 B2 World Wide PCT Pending

All IM.x information is subject to change without notice. 10260 SW Greenburg Rd., Suite 400 • Portland OR 97223 • Ph: 800.605.0038 • Fx: 503.406.2138 • Em: Info@I-Mx.net 22


Stark Vise Line “The Revolution Vise” •

No Main Screw

No Thrust Bearing

No Seals

No Rings

No Springs

No More Repair Kits!


I n t r o d u c t i o n t o Stark Vise Line ™

Photograph of the Sa2, 4-Axis Stark Compound - Sine Vise Sa2 (3-Axis Mode)

Patent: US 7,854,072 B2 World Wide PCT Pending

All IM.x information is subject to change without notice. 10260 SW Greenburg Rd., Suite 400 • Portland OR 97223 • Ph: 800.605.0038 • Fx: 503.406.2138 • Em: Info@I-Mx.net 23


Stark Vise Line “The Revolution Vise” •

No Main Screw

No Thrust Bearing

No Seals

No Rings

No Springs

No More Repair Kits!


I n t r o d u c t i o n t o Stark Vise Line ™

Photograph of the Sa2, 4-Axis Stark Compound - Sine Vise Sa2 (4-Axis Mode)

Patent: US 7,854,072 B2 World Wide PCT Pending

All IM.x information is subject to change without notice. 10260 SW Greenburg Rd., Suite 400 • Portland OR 97223 • Ph: 800.605.0038 • Fx: 503.406.2138 • Em: Info@I-Mx.net 24


Stark Vise Line “The Revolution Vise” •

No Main Screw

No Thrust Bearing

No Seals

No Rings

No Springs

No More Repair Kits!


Welcome to

Torq Line Products

25


Torq-Itz Line • Torq-Itz 1

1/2" drive

• Torq-Itz 2

3/8" drive

• Torq-Itz 3

1/4" drive

• Torq-Itz 4

3/4" drive

• Torq-Itz 5

7/8" drive

• Torq-Itz Customs

Torq-Itz™ is alone in industrial history and solely occupies its own design category.


Introduction to Torq-Itz™ Paatent Pending

Intro oducction to t To orq-Itzz

The follo owing inform mation regarding Torq-IItz™ collecttively, is pro oprietary and therefore,, with the exception of o _______________with h __________________ (et ( al) and only o as it relates to our fu uture busine ess relationship, cannott be dispenssed or otherrwise dissem minated to anyone for f any reasson without the expresss written co onsent of IM M.x Corporattion. These de evices are re evolutionaryy. Therefore e, it is in our collective interests to o guard with h zeal their confidentiiality prior to o the start of o productio on.

Torq-Line Products Ove erview : Torq-Itz™ is a revolutionary new in ndustrial inve ention. Torq-Itz™ does no ot replace orr improve anything now existing g in the markket place. Torrq-Itz™ is unique. Torq-Itzz™ creates an entirely ne ew ndustrial torq que sensing equipment e occupied onlyy by itself. class of in

Torq-Itz™ is alone in i industriall history and d solely occu cupies its ow wn design caategory. Torq Line e, Torq-Itz pro oducts are to orque sensing g lineal drive e devices dessigned to be utilized with power tools and pow wer sources of virtually anyy type. Torq q Line torque e sensing products are pre ecise, over-torque is imposssible. 1)

Torrq-Itz 1, “The Boss” : Torrq-Itz 1 is a ½ in. drive, friiction-less, no on lubricated d, compound d lineal drive unit. Internaal asse embly is constructed entiirely of harde ened IM.x Blu10 ballistic metal alloy. Outer casess, inclluding pound d indicator raatchet (inside e etched) is constructed c o ballistic nyylon. The devvice of is virtually indesstructible. It is non-lubricaated and is 100% mainte enance free. Torrque range is in 2½ ft. lb. increments from f 40-140 ft. lbs. Torq--Itz 1 can eassily be held in n one e hand all the e way up to 140 1 ft. lbs off torque, the other hand holding h the power p supplyy.

Theere is no tran nsfer of torqu ue to the nylo on jackets. 2)

Torrq-Itz 2, “Min ni Boss” : Torrq-Itz 2 is a 3//8 in. drive version v of the e “The Boss” unit and is rated r from 15 5-80 ft. lbs.

3)

Torrq-Itz 3, “Min ni-Mini”: Torrq-Itz 3 is a 1//4 in. drive version, v and is i rated in incch lbs to 20 ft. f lbs.

4)

Torrq-Itz 4, “Big Boss”: To orq-Itz 4 is a 3/4 in. drive e version and d is rated to 200 2 ft. lbs. Torq-Itz T 4 is a one man un nit.

5)

Torrq-Itz 5, “The Gorilla”: Torrq-Itz 5 is a 7//8 in. drive version v of the e above and is rated to 350 ft. lbs. To orq-Itz 5 is a two o – man unit only.

26


Torq-Itz Line • Torq-Itz 1

1/2" drive

• Torq-Itz 2

3/8" drive

• Torq-Itz 3

1/4" drive

• Torq-Itz 4

3/4" drive

• Torq-Itz 5

7/8" drive

• Torq-Itz Customs

Torq-Itz™ is alone in industrial history and solely occupies its own design category.


Introduction to Torq-Itz™ Paatent Pending

6)

Torrq-Itz Custom ms : g units - incre edibly robustt at 1 in. drive e and larger, custom desiigned a) Torq-Itz Cusstoms are big for specific super-heavy industrial pu urposes. dividually dessigned for de esignated envvironments of o single or gang b) Torq-Itz Cusstoms are ind systems. s speciffic. c) Custom unitts are drive source d) Custom unitts are explossion shielded and robotically operated d in both elecctric or hydraaulic drive source e. e) Torque ratin ngs begin at 400 4 ft. lbs.

7)

Torrq-Itz, Generaal Data : a)

b) c) d)

Any of the above unit types t can be successivelyy integrated into multipless or gangs off multiples. Any unit, or o multiples th hereof, can be b operated remotely as in computer navigated. Once the appropriate a b breakaway-to orque has been dialed in, the specificaation will nott change ove er time, i.e., no n further ad djustments. Any Torq Line L product can be desig gned for speccific, single to orque setting g environmen nts. Example : wheel w lugs, oil o drain plugs, etc.

8)

Torrq Line produ ucts are labor saving deviices with literally thousan nds of applicaations in thousands of diffferent enviro onments.

9)

The e Torq-Itz 1 device d is the primary tech hnology base e for all Torq-Itz designs : a) Research an nd developm ment for Torq--Itz 1 is comp plete. b) Limited prod duction runs will facilitate e final certificcations and set s up for larg ge scale production.

10)

Pro ototypes : a) IM.x has fullly developed d proof-of-con ncept protottypes of the Torq-Itz T ™ de evice. Componentts are as delin neated above.

11) Pro oduction : a) First producction timetable is set for September S 1,, 2014.

12)

Ovverview of demand d : a) The Torq-Itzz™ devices are a extremelyy productive in virtually all a mechanicaal or manufacturiing assemblyy environmen nts where pro oduct or servvice liability exists e regarding specified torque….

27


Torq-Itz Line • Torq-Itz 1

1/2" drive

• Torq-Itz 2

3/8" drive

• Torq-Itz 3

1/4" drive

• Torq-Itz 4

3/4" drive

• Torq-Itz 5

7/8" drive

• Torq-Itz Customs

Torq-Itz™ is alone in industrial history and solely occupies its own design category.


Introduction to Torq-Itz™ Paatent Pending

1) Machine e shops of all types, world wide, such h as: automob bile, tractor, truck, boat, airplane e, various deffense departm ments, garag ges, warehouses, field assembly lines, automobile dealersh hips, etc. 2) Every tirre shop on th he planet (wh heel lugs, of course). And d a multitude e of other torrque requirem ments pursuaant to potenttial shop liabiility where sp pecified torque must be precise, potentially certified, c and/or may be a requiremen nt of law. Eve ery oil-change e on on the plaanet (drain pllug torque, etc.). e operatio 3) Perhapss the greatestt demand of all – individu ual mechaniccs’ tool boxes. 4) This devvice also has the authorityy to become e the new mu ust-have for mechanic m typ pes – birthdayys, Christmass and the like e…. everywhe ere. b) Torq-Itz Cusstoms : These units are specificaally engineere ed for individ dual applications involving extreme drive d extreme torrque and und der extreme circumstance es. Heavy in ndustrial sources and manufacturiing systems – ships, aircraaft, railroad, tractor, etc. Heavy item robotic asse embly systems. Un nder water re epair. Etc…

13) Pattents : a) This is a multi-patent devvice. All finaal patent applications are on file with the t US Paten nt e (USPTO). However, the patent seaarch is complete and we have h the initiial Trade Office response fro om the USPT TO : “no such h previous paatent(s) existts”. We expe ect final pate ents for Torq-Itz in July 2014.. b) In addition, we are proceeding with preparationss to file a PCT T (Patent Cooperation Trreaty bined applicaations as well. Brazil, Me exico, and – 117 counttries, all conttinents) comb Canada will be filed separately. We are also plan nning separate patent applications forr ntries of the Middle East. certain coun

Our inten nt is to contro rol both the patent p and th he sale of thee products world w wide. We W will proce ceed to great lengths le in pu ursuit of this goal. g

14) Pattent attorneyy is Mark S.. Hubert as indicated below : a) You may co ontact Mr. Hu ubert through appointme ent as arrange ed through our o office. Mark S. Hub bert Intellectual Property Law w

28


Torq-Itz Line • Torq-Itz 1

1/2" drive

• Torq-Itz 2

3/8" drive

• Torq-Itz 3

1/4" drive

• Torq-Itz 4

3/4" drive

• Torq-Itz 5

7/8" drive

• Torq-Itz Customs

Torq-Itz™ is alone in industrial history and solely occupies its own design category.


Introduction to Torq-Itz™ Paatent Pending

15) Pricces : Torq-Itz 1 Torq-Itz 2 Torq-Itz 3 Torq-Itz 4 Torq-Itz 5

$289.00 $219.00 $189.00 $389.00 $789.00

1/2 2” 3/8 8" 1/4 4" 3/4 4" 7/8 8"

Drive Unit Drive Unit Drive Unit Drive Unit Drive Unit

Torq-Itz Cusstoms start att $2,795.00 each e for off-tthe-shelf units. Custom engineering e a and prototype faabrication co osts are addittional and billed accordin ngly.

End of Syynopsis IM.x is nearing large e scale prod duction of Torq-Itz 1, “T The Boss”. Per the abo ove, it is imperativve that everryone review wing Torq-Ittz abide by the anti-disclosure and d anticompetittion agreem ments includ ded herewith h. Western patents havve little meaaning in som me third wo orld countrie es. Thereforre, regarding Torq-Itz, we ask agaain that you keep our communicattion discreett. This inve ention is botth real and amazing, a incredible acttually. But the t central focus f is, and d should be, b on the in nventor. A true t mechan nical engine eering geniu us. We appreciate our association with him m and we ap ppreciate th he numerous opportuniities this gen ntleman hass brought to our doorr.

Note : The Torq-Itz T name, log go, product speciificity and domain n names are the sole s property of IM M.x and are not licensed for any other o purp pose except under the jurisdiction n of the parent co ompany.

ormation is subject to change without notice All IM.x info

29


Torq-Itz Line • Torq-Itz 1

1/2" drive

• Torq-Itz 2

3/8" drive

• Torq-Itz 3

1/4" drive

• Torq-Itz 4

3/4" drive

• Torq-Itz 5

7/8" drive

• Torq-Itz Customs

Torq-Itz™ is alone in industrial history and solely occupies its own design category.


Introduction to Torq-Itz™ Paatent Pending

Torq - Itz™ Te ech Shee et

T q-Itzz Torq

™ Patent Pending P World Wide PCT Pending P

1.

Torrq-Itz Industriial Class (Excclusive) : 1/4 4" – 2", Precission Lineal, Remote R Powe ered, Auttomatic Torque Sensing Device. D

2. 3.

4. 5. 6.

7. 8. 9. 10.

11. 12. 13. 14.

15.

a. This is a new w industrial class c occupie ed solely by TorqT Itz™ prroducts. b. Applicationss : Universal App purtenant Sp pecialized De evices, Exclussive to Torq-Itz : Yes. Pate ent a. These itemss are under development and are eng gineered and patented separately. Com mposition : a. Main Drive Shaft : IM.x Blu10 @ 63 Rockwell. R b. Bearings, races, spacers & washers : IM.x Blu10 c. IM.x Blu10 : Super dense, ballistic allloy steel @ 5 times the faatigue strengtth of D-2 ! Com mposition : a. Jackets : Balllistic Nylon with w color laser reverse etching. e Adjustment Mechanism : Fu ully adjustable e with “Perm manent Ratch het Lock”. Maximum Torque Dial : 2" drive : 40 - 140 lb bs. Adju usted in 2 ½ ft. lbs. increments a. Torq-Itz 1 1/2 b. Torq-Itz 2 3/8 8" drive : 15 – 80 lb bs. Adju usted in 1 ½ ft. lbs. increments. c. Torq-Itz 3 1/4 4" drive : 1 – 20 lbss. Adju usted in inch h lbs. d. Torq-Itz 4 3/4 4" drive : 80 – 200 lbs. Adju usted in 4 ft. lbs. increme ents. e. Torq-Itz 5 7/8 8" drive : 190 – 350 lbs Adju usted in 5 ft. lbs. increme ents : 350 - 2,50 f. Torq-Itz Cusstoms 00 lbs Anyy designed in ncrement Tim me Interval to o (any) Torque Setting : 60 0 seconds. Tim me Interval To o Indicated Torque T : Instantaneous (d depending on n drive sourcce). Maximum Torque Transfer To T Jacket : None Servviceability : a. Lubrication : None b. Nylon Jacke et Replaceme ent : Yes. Facctory return required. r c. Field Service eable : By IM M.x certified technician t on nly. Maximum Overr-Torque : None. Over-to orque is impo ossible with any a Torq - Itzz product. Main Shaft Shee er Strength : Double the maximum design load. Any A unit - miinimum. Vib bration (entire e working ran nge) : Minim mum, depend ding on drive e source. Dim mensions : To orq-Itz 1 (½" drive unit) : 5½" x 2 3/4"" (cylinder). We eight : Torq-Ittz 1 (½" drive e unit) : 3.44 lbs. Net. All IM.x informaation is subje ect to change e without nottice.

10260 W Greenburg Rd., R Suite 400 • Portland OR 97223 9 • Ph: 800 0.605.0038 • Fx: F 503.406.213 38 • Info@I-Mx.net 30


Torq-Itz Line • Torq-Itz 1

1/2" drive

• Torq-Itz 2

3/8" drive

• Torq-Itz 3

1/4" drive

• Torq-Itz 4

3/4" drive

• Torq-Itz 5

7/8" drive

• Torq-Itz Customs

Torq-Itz™ is alone in industrial history and solely occupies its own design category.


Introduction to Torq-Itz™ Paten nt Pending

Phottograph of Torq-Itzz ™, “The Bo oss”

P Patent Pending World Wide PCT Pending

IM.x in nformation is subjecct to change withoutt notice. 10260 W Grreenburg Rd., Suite 400 • Portland OR 97223 • Ph: 800.605.0038 • Fx: 503.4 406.2138 • Info@I-M Mx.net

31


IM.x Blu10 “Super High Density Steels”


Welcome to

IM.x Blu10

™

32


IM.x Blu10 “Super High Density Steels”


Introduction to IM.x Blu10™

Introduction to Blu10 IM.x Blu10 is a remarkable new specialized alloy and represents a breakthrough in super-dense tool steels. In fact, no other tool steel in the marketplace today is comparable. Blu10 is absolutely exclusive to the products available through IM.x. Blu10 is not available in any other competing products.

IM.x Blu10 – simply the best. As in : 1) Abrasion Resistance. Wear Resistance. Temper Resistance. Compressive Strength. Fatigue Strength. 2) Superior in all aspects to Ni-Resist Densite (D-2), current benchmark of tool steels. In fact, more than 5 times the fatigue strength of D-2 ! 3) The ease of machining of this unique high density alloy allows for impressive minimum tolerances in the manufacturing process. In fact, near laboratory “Plus-Or-Minus” tolerance achievement in all products of Blue10 Manufacture. 4) Unparalleled “True-To-Original-Specifications” over time. 5) Non-Corrosive : Blu10 products can be utilized in corrosive environments. 6) Sterile : Once sterilized, Blu10 products can be utilized in sterile environments continually over time – such as the manufacture of medical equipment, i.e., no rust. IM.x Blu10 : A remarkable achievement in metallurgy.

Note : The Blu10 name, logo, product specificity and domain names are the sole property of IM.x and are not licensed for any other purpose except under the jurisdiction of the parent company.

IM.x information is subject to change without notice.

10260 SW Greenburg Rd. Suite 400 • Portland, OR 97223 • Ph: 800.605.0038 • Fx: 503.406.2138 • Info@I-Mx.net

33


IM.x Blu10 “Super High Density Steels”


Introduction to IM.x Blu10™

Blu10 Tech Sheet Temper Resistance IM.x Blu10 Hardened at 1030C 1886F

D-2 Hardened at 1030C 1886 F

S7 57RC 392F

572F

752F

932F

968F

1004F

A2 60RC

D2 61RC

Blu10

M2 62RC

PMLV62RC

PMM3 62RC

A1160RC

1040F

Tempering temp. (°C x 1hr x 2)

Primary Carbides

IM.x Blu10

Highly specialized manufacturing processes in - ladle refinement, vacuum degassing and forging methodologies result in exceptional carbide uniformity. Primary carbides in IM.x Blu10 are relatively small with highly uniform distribution as compared to other tool steel grades such as D-2. Note : This is an actual microscopic photograph demonstrating the superior density of Blu10.

D-2

D2 (61HRC) Blu10

10260 SW Greenburg Rd. Suite 400 • Portland, OR 97223 • Ph: 800.605.0038 Fx: 503.406.2138 • Info@I-Mx.net 34


IM.x Blu10 “Super High Density Steels”


7.23.12


International Materials & Equipment Exchange, Inc.


Welcome to International Material & Equipment Exchange, Inc.