IKH is a member of The Finnish Work Safety Association
IKH’s Patron brand has been awarded the Design from Finland label
Work gloves - get a firm hold of work
With the right work gloves, tasks become more efficient and safer. Quality is guaranteed by well-known brands such as Patron and JokaSafe. Our extensive selection offers gloves for a variety of work situations to protect your hands from mechanical and chemical hazards.
Come find your perfect pair from IKH!
Patron Perfect Fit 4-6
Perfect fit - confidence and precision in every situation.
Patron Great Grip 7-8
Firm grip, even on slippery surfaces.
Patron Oil Resistant 9
Strong protection for oily environments.
Patron Cut Resistant 10-11
Safety and precision for sharp situations.
Patron Max Comfort 12-15
Maximum comfort for demanding tasks.
Patron Water Resistant 16
Reliable protection for wet conditions.
Patron Cold Resistant 18-25
Warmth and protection for cold environments.
Size guide
17
Guide for hand measurements
Other brands
27 Weldas
28-30 JokaSafe
31 Showa
32 Semperguard
33 Cerva
About gloves
36-39 Glove materials, categories and standards
SH028W
Patron Warm Black
Extremely warm, reflective print, touchscreen compatible page 22
Patron RPET Stretchy Excellent grip, superior fit page 5
Patron Perfect Fit
Perfect fit – confidence and precision in every situation.
Sizes 6-12
SH50006S-SH50012S
• seamless recycled RPET polyester-elastane knit
• thin 15-gauge knit is highly flexible and comfortable to wear
• rough sandy latex coating on the palm
• excellent grip
• superior fit
• color heather light blue/navy
Conforms to EN ISO 21420:2020 CE-category 2 (against medium hazard)
EN 388:2016+A1:2018 test results:
• abrasion resistance 2
• cut resistance (Coupe) 1
• tear resistance 3
• puncture resistance 1
• cut resistance (TDM) X
EN 407:2020 test results:
• flammability resistance X
• contact heat resistance: 1 (the coated palm area withstands contact heat up to 100°C)
• protection against open flames X
• protection against radiant heat X
• protection against small splashes of molten metal X
• protection against large splashes of molten metal X
Work gloves nitrile coating
Sizes 7-11
SH01107T-SH01111T
• seamless nylon-polyester knit
• smooth nitrile coating on palm and fingers
• excellent grip and fingertip sensitivity
• snug fit
• nitrile protects against oils and solvents
• colour black
Conforms to EN ISO 21420:2020 CE-category 2 (against medium hazard)
EN 388:2016+A1:2018 test results:
• abrasion resistance 4
• cut resistance (Coupe) 1
• tear resistance 3
• puncture resistance 1
• cut resistance (TDM) X
Work gloves PU coating Touch Screen
Sizes 7-11
SH01207T-SH01211T
• ultra-thin, seamless nylon-polyester knit
• fine-structured PU coating on palm and fingers
• excellent grip and fingertip sensitivity
• touch screen functionality: works with mobile phones and other touch screen devices
• excellent ergonomic fit and user comfort
• excellent for tasks requiring finger dexterity and tactile sensitivity
• colour black
Conforms to EN ISO 21420:2020 CE-category 2 (against medium hazard)
EN 388:2016+A1:2018 test results:
• abrasion resistance 3
• cut resistance (Coupe) 1
• tear resistance 3
• puncture resistance 1
• cut resistance (TDM) X
Excellent grip, superior fit
Patron Perfect Fit work gloves
Applications
• wet environments
• handling slippery objects
• handling hot items, max. 100°C
• assembly
• installation work
• general purpose work
• construction and renovation
Excellent grip and fingertip sensitivity, snug fit
Applications
• installation work
• construction
• agriculture
• oily/greasy surfaces and areas
• logistics, machinery transport
Excellent grip and fingertip sensitivity, excellent fit and user comfort
• assembly and construction
• general purpose work
Applications
• precision installation work
• handling of small parts
• assembly and construction
• cashier work
• general purpose work and warehouse operations
Patron Perfect Fit work gloves
Work gloves nitrile coating Hi-Vis
Sizes 6-11
SH01306K-SH01311K
• seamless nylon knit
• nitrile coating on palm and fingers
• excellent grip and fingertip sensitivity
• great fit, comfortable to wear
• nitrile protects against oils and solvents
• colour hi-vis yellow/black
Conforms to EN ISO 21420:2020 CE-category 2 (against medium hazard)
EN 388:2016+A1:2018 test results:
• abrasion resistance 4
• cut resistance (Coupe) 1
• tear resistance 3
• puncture resistance 1
• cut resistance (TDM) X
Work gloves PU coating
Sizes 7-11
SH05407T-SH05411T
• seamless nylon-polyester knit
• PU coating on palm and finger grip surfaces
• excellent grip and fingertip sensitivity
• snug fit
• polyurethane offers reasonable resistance to oils and greases
• colour black/grey
Conforms to EN ISO 21420:2020 CE-category 2 (against medium hazard)
EN 388:2016+A1:2018 test results:
• abrasion resistance 4
• cut resistance (Coupe) 1
• tear resistance 3
• puncture resistance 1
• cut resistance (TDM) X
Work gloves PU coating
Sizes 7-11
SH005407T-SH005411T
• seamless nylon-polyester knit
• PU coating on palm and finger grip surfaces
• excellent grip and fingertip sensitivity
• snug fit
• polyurethane offers reasonable resistance to oils and greases
• colour black/grey
Conforms to EN ISO 21420:2020 CE-category 2 (against medium hazard)
EN 388:2016+A1:2018 test results:
• abrasion resistance 4
• cut resistance (Coupe) 1
• tear resistance 3
• puncture resistance 1
• cut resistance (TDM) X
Excellent grip and fingertip sensitivity, great fit, comfortable to wear
Applications
• installation work
• construction
• agriculture
• oily/greasy surfaces and areas
• logistics, machinery transport
Excellent grip and fingertip sensitivity, snug fit
and warehouse operations
• assembly and construction
• gardening
• general purpose work
Applications
• installation work
• construction
• surfaces/areas with light oil or grease contamination
• logistics
• assembly and construction
• general purpose work
Excellent grip and fingertip sensitivity, snug fit
Applications
• installation work
• construction
• surfaces/areas with light oil or grease contamination
• logistics
6 pairs package
• assembly and construction
• general purpose work
Patron Great Grip Firm grip, even on slippery surfaces.
Work gloves Britex Hi-vis
Sizes 8-13
SH04208K-SH04213K
Children’s sizes 5-7
SH04205K-SH04207K
• 55% polyurethane, 45% polyester
• adjustable velcro tightening on cuff
• Hi-Vis yellow
Conforms to EN 420 CE-category 1
Adjustable velcro cuff
Applications
• general use
• warehouse work
• loading work
• construction
Work gloves 3/4 latex coating Hi-vis
Sizes 7-11
SH09107K-SH09111K
• nylon liner with 3/4 coated crinkle latex
• knitted cutless glove provides comfort use and excellent fit
• black crinkle latex coating in palm and fingers up to knuckles
• uncoated back of the hand keeps hands cool and dry
Conforms to EN 420 CE-category 2 (against medium hazard)
EN 388:2016+A1:2018 test results:
• abrasion resistance 2
• cut resistance 1
• tear resistance 4
• puncture resistance 1
• cut resistance (TDM) X
Excellent comfort, keeps hands cool and dry Also children’s sizes!
Applications
• handling slippery and wet surfaces
• cleaning • construction • timber industry
• gardening
• waste management
Patron Oil Resistant Strong protection for oily environments.
Work gloves nitrile coating
Sizes 9-11
SH05209T-SH05211T
• glove with heavy-duty nitrile coating up to the wrist
• thin cotton lining
• safety cuff
• exceptional grip
• nitrile provides excellent protection against most hydrocarbon solvents, acids and alkalis, as well as lubricants and oil-based products
• extremely durable
• color blue
Conforms to EN ISO 21420:2020 CE-category 2 (against medium hazard)
EN 388:2016+A1:2018 test results:
• abrasion resistance 4
• cut resistance (Coupe) 1
• tear resistance 2
• puncture resistance 1
• cut resistance (TDM) X
Safety cuff, excellent grip, wear-resistant
Applications
• machinery work
• timber industry
• agriculture
• waste management
• boating
Patron Cut Resistant Safety and precision for sharp situations.
Work gloves PU coating cut resistant
Sizes 6-12
SH33306T-SH33312T
• 30% polyurethane coating, 50% cut protection yarn, 12% nylon, 8% lycra
• knitted cutless glove provides comfort use
• cut resistant
• PU-coating in palm and finger tips
• for working conditions where dexterity and good contact are needed
• PU-coating protects well against greases and oil
Conforms to EN 420
CE-category 2 (against mechanical risks)
EN 388:2016+A1:2018 test results:
• abrasion resistance 4
• cut resistance (Coupe) 3
• tear resistance 4
• puncture resistance 2
• cut resistance (TDM) B
Patron’s cut resistant gloves have been tested in two different cut protection tests: you can find the results of both the Coupe and TDM tests.
Work gloves PU coating cut resistant
Sizes 7-12
SH33407T-SH33412T
• 40% polyurethane coating, 40% cut protection yarn, 12% nylon, 8% lycra
• knitted cutless glove provides comfort use
• cut resistant
• PU-coating in palm and finger tips
• for working conditions where dexterity and good contact are needed
• PU-coating protects well against greases and oil
Conforms to EN 420 CE-category 2 (against mechanical risks)
EN 388:2016+A1:2018 test results:
• abrasion resistance 4
• cut resistance (Coupe) 4
• tear resistance 4
• puncture resistance 3
• cut resistance (TDM) E
Work gloves PU coating cut resistant
Sizes 6-12
SH33606H-SH33612H
• seamless HPPE knit, 13 gauge
• high-performance polyethylene fibers provide cut resistance
• thin, smooth polyurethane coating on the palm
• contains 3% latex
• excellent comfort
• exceptional fit
• good grip and finger dexterity
• color white/black and gray
Conforms to EN ISO 21420:2020 CE-category 2 (against medium hazard)
EN 388:2016+A1:2018 test results:
• abrasion resistance 4
• cut resistance (Coupe) 4
• tear resistance 4
• puncture resistance 2
• cut resistance (TDM) B
Excellent comfort and great fit
Applications
• tasks requiring dexterity and tactile sensitivity
Excellent comfort and great fit
Applications
• tasks requiring dexterity and tactile sensitivity
Excellent comfort and fit, good grip and finger dexterity
Applications
• handling sharp objects
• installation work
• construction
• woodworking
•
Patron Max Comfort Maximum comfort for demanding tasks.
Work gloves open cuff
Sizes 8-12
SH00208M-SH00212M
• 40% polyurethane, 60% polyester
• rubberband tension in cuffs
Conforms to EN 420 CE-category 1 (against minor hazard)
Work gloves nonwoven open cuff
Sizes 8-12
SH06208T-SH06212T
Children’s sizes 5-7
SH06205T-SH06207T
• 50% PU/PA mixture, 50% polyamide
• elastic band wrist
• suitable for chrome allergic
Conforms to EN 420 CE-category 1 (against minor hazard)
Work gloves leather
Sizes 8-12
SH00708T-SH00712T
• goatskin leather with cotton twill back
• safety cuff made of cotton/rubber blend
• high wearing comfort
• colour black/natural undyed leather
Conforms to EN ISO 21420:2020 CE-category 2 (against medium hazard)
EN 388:2016+A1:2018 test results:
• abrasion resistance 2
• cut resistance (Coupe) 1
• tear resistance 2
• puncture resistance 2
• cut resistance (TDM) X
Elastic band wrist
Applications
• general use
• installation, assembly and warehouse work
• packing and loading work
Patron’s trusted glove that suits many uses – durable, breathable, and allergen-free
Applications
• tasks requiring dexterity and tactile sensitivity
Safety cuff, great comfort Also children’s sizes!
Applications
• heavy-duty assembly work • construction
logistics • machine transportation
• general purpose work
Work gloves leather RIB
Sizes 9-11
SH11709T-SH11711T
• goatskin leather with ribbed cotton jersey back
• cotton jersey backing enhances breathability
• safety cuff made of cotton/rubber blend
• high wearing comfort
• colour black/orange/natural light leather
Conforms to EN ISO 21420:2020 CE-category 2 (against medium hazard)
EN 388:2016+A1:2018 test results:
• abrasion resistance 2
• cut resistance (Coupe) 1
• tear resistance 2
• puncture resistance 2
• cut resistance (TDM) X
Safety cuff, great comfort
Applications
• heavy-duty assembly work
• construction
• logistics
• machine transportation
Work gloves leather Hi-vis
Sizes 8-12
SH11808K-SH11812K
• 60% goat skin, 40% cotton twill fabric
• hi-vis yellow on back of the hand
• pleasant to use
• soft fleece lining on the palm
• reflective tape on back of the hand
Conforms to EN 420
CE-category 2 (against medium hazard)
EN 388:2016+A1:2018 test results:
• abrasion resistance 2
• cut resistance 2
• tear resistance 3
• puncture resistance 2
• cut resistance (TDM) X
• general purpose work
Safety cuff, comfortable to wear, soft fleece lining
Applications
• heavy-duty assembly work
• construction
• logistics
• machine transportation
Work gloves leather spandex
Sizes 8-12
SH11108M-SH11112M
• palm goatskin, back of the hand elastic spandex and soft neoprene knucle guard
• excellent comfort and fit
• good abrasion resistance and suitable for a wide range of applications
Conforms to EN 420
CE-category 2 (against medium hazard)
EN 388:2016+A1:2018 test results:
• abrasion resistance 2
• cut resistance 1
• tear resistance 2
• puncture resistance 2
• cut resistance (TDM) X
• general purpose work
Excellent comfort and fit, good wear resistance
Applications
• construction
• logistics
• machine transportation
• general purpose work
Work gloves leather open cuff
Sizes 8-12
SH03608T-SH03612T
• 40% leather, 60% polyester
• leather palm and forefinger
• polyester britex on back of the hand
• keystone thumb
• elastic band on wrist
Conforms to EN 420
CE-category 2 (against medium hazard)
EN 388:2016+A1:2018 test results:
• abrasion resistance 2
• cut resistance 1
• tear resistance 2
• puncture resistance 2
Work gloves leather with velcro
Sizes 8-12
SH03708T-SH03712T
• 45% leather, 55% polyester
• palm and fingertips leather
• polyester spandex on back of the hand
• adjustable cuff made of soft neoprene
• good dry grip
Conforms to EN 420
CE-category 1 (against minor hazard)
Work gloves Foam PU
Sizes 8-12
SH08007K-SH08011K
Sizes 8-12
SH08107O-SH08111O
• 45% polyuretane, 55% polyester
• comfortable to wear
• paddings on palms and knuckles
• elastic band on wrist
Conforms to EN 420
CE-category 1 (against minor hazard)
Keystone thumb, elastic band wrist
Applications
• for installation work and general use
Leather craftsman glove stays securely in place thanks to the velcro wrist strap A well-fitting glove for cool
Applications
• for installation work and general use
• construction
• assembly, warehouse, packing and loading work
Applications
• general use • installation, assembly and warehouse work
• packing and loading work
Patron Water Resistant Reliable protection for wet conditions.
Work gloves 2x latex coating
Sizes 7-11
SH09407S-SH09411S
• seamless polyester knit
• double latex coating: smooth latex coating on the entire glove, with an additional rough latex coating on the palm
• excellent grip and flexibility
• snug fit
• color blue/gray
Conforms to EN ISO 21420:2020 CE-category 2 (against medium hazard)
EN 388:2016+A1:2018 test results:
• abrasion resistance 3
• cut resistance (Coupe) 1
• tear resistance 4
• puncture resistance 1
• cut resistance (TDM) X
EN 511:2006 test results:
• convective cold X
• contact cold X
• water penetration 1
Excellent grip and flexibility
• outdoor work in wet conditions
• fish processing
• handling slippery objects
• forestry and agriculture
• construction, concrete work
Guide for hand measurements
Glove fits vary according to the intended use.
Glove sizes according to EN ISO 21420:2020
Patron Cold Resistant Warmth and protection for cold environments.
Work gloves 3/4 latex coating Hi-vis
Sizes 8-11
SH09208W-SH09211W
• knitted polyester, 3/4 crinkled latex coating
• acrylic lining
• seamless knitted glove gives ideal comfort to user
• black crinkled latex coating on palms and fingers up to knuckles
• uncoated back of the hand keeps hands cool and dry
Conforms to EN 420 CE-category 2 (against medium hazard)
EN 388:2016+A1:2018 test results:
• abrasion resistance 2
• cut resistance 1
• tear resistance 4
• puncture resistance 1
• cut resistance (TDM) X
EN 511:2006 test results:
• convective cold 1
• contact cold 2
• water penetration X
Work gloves 2x latex coating
Sizes 7-11
SH09507W-SH09511W
• seamless polyester knit
• acrylic fleece lining
• double latex coating: smooth latex coating on the entire glove, with an additional rough latex coating on the palm
• excellent grip and flexibility
• snug fit
• color blue/navy
Conforms to EN ISO 21420:2020 CE-category 2 (against medium hazard)
EN 388:2016+A1:2018 test results:
• abrasion resistance 2
• cut resistance (Coupe) 2
• tear resistance 3
• puncture resistance 2
• cut resistance (TDM) X
EN 511:2006 test results:
• convective cold X
• contact cold 3
• water penetration 1
EN 407:2020 test results:
• flammability resistance X
• contact heat resistance 2: (the coated palm area withstands contact heat up to 250°C)
• protection against open flames X / radiant heat X / small splashes of molten metal X / large splashes of molten metal X
Work gloves Sandy nitrile coating
Sizes 7-11
SH09607W-SH09611W
• seamless polyester knit
• warm acrylic fleece lining
• rough sandy nitrile coating on the palm
• contains 3% latex
• excellent grip and abrasion resistance
• snug fit
• color orange/black
Conforms to EN ISO 21420:2020 CE-category 2 (against medium hazard)
EN 388:2016+A1:2018 test results:
• abrasion resistance 4
• cut resistance (Coupe) 2
• tear resistance 2
• puncture resistance 1
• cut resistance (TDM) X
EN 511:2006 test results:
• convective cold X
• contact cold 3
• water penetration X
EN 407:2020 test results:
• flammability resistance X
• contact heat resistance 2: (the coated palm area withstands contact heat up to 250°C)
• protection against open flames X / radiant heat X / small splashes of molten metal X / large splashes of molten metal X
Patron Cold Resistant work gloves
Acrylic lining, excellent comfort, keeps hands cool and dry
Applications
• cool conditions
• handling slippery and wet surfaces
• cleaning
• construction
Lined latex glove keeps hands dry in cold and wet outdoor conditions
• timber industry
• gardening
• waste management
Applications
• outdoor work in cold and wet conditions
• handling slippery objects
• handling hot items, max. 250°C
• construction, concrete work
• fish processing
• forestry and agriculture
A slightly warmer glove for cold and damp conditions – highly abrasion-resistant nitrile coating up to the knuckles
Applications
• cool, damp outdoor work
• handling slippery objects
• handling hot items, max. 250°C
• general purpose work
• oily/greasy surfaces and areas
• construction
Work gloves RPET Sandy latex coating
Sizes 7-11
SH09707W-SH09711W
• seamless recycled RPET polyester-elastane knit
• very thin acrylic lining
• rough sandy latex coating on the palm
• excellent grip
• good fit
• color light brown heathered/black
Conforms to EN ISO 21420:2020
CE-category 2 (against medium hazard)
EN 388:2016+A1:2018 test results:
• abrasion resistance 2
• cut resistance (Coupe) 1
• tear resistance 3
• puncture resistance 1
• cut resistance (TDM) X
Work gloves leather
Sizes 9-12
SH00909TW-SH00912TW
• main material natural goat skin
• teddylining 80% cotton / 20%polyester
• palm 100% cotton twill
• safety cuff made of rubber compund and cotton twill
• warm, comfortable to use
EN ISO 21420:2020
CE-category 2 (against medium hazard)
EN 388:2016+A1:2018 test results:
• abrasion resistance 2
• cut resistance (Coupe) 1
• tear resistance 3
• puncture resistance 2
• cut resistance (TDM) X
EN 511:2006 test results:
• convective cold 2
• contact cold 2
• water penetration 0
Work mittens polyester, leather
Sizes 9-12
SH02409TW-SH02412TW
• goatskin grip surface
• back and extended cuff made of polyester softshell
• detachable finger lining made of acrylic faux fur
• wrist adjuster and attachment clip
• extremely warm mitten
• colour black/natural undyed leather
Conforms to EN 420
CE-category 1 (against minor hazard)
Brushed inner lining insulates from the cold, ideal for cool indoor or outdoor tasks where finger dexterity must be maintained
Applications
• cool and humid environments
• handling slippery objects
• construction and renovation
• assembly
Safety cuff, warm teddy lining, great comfort
• installation work
• general purpose work
Applications
•
•
•
Winter mittens with a removable warm lining, making it easy to dry if it gets wet
Applications
•
•
Work gloves polyester, leather
Sizes 9-12
SH02509TW-SH02512TW
• goatskin grip surface
• back and extended cuff made of polyester softshell
• waterproof PU membrane
• 3M Thinsulate™/MC insulation and fleece lining
• acrylic faux fur lining in the cuff
• extremely warm glove
• reinforced thumb crotch
• colour black/natural undyed leather
Conforms to EN 420 CE-category 1 (against minor hazard)
Work gloves Warm Short Hi-vis
Sizes 8-12
SH02608W-SH02612W
Children’s sizes 5-7
SH02605W-SH02607W
• goatskin palm, Softshell back
• waterproof PU membrane
• very warm fleece/cotton lining
• touchscreen surface on thumb and index fingers
• pre-shaped fingers
• short cuff
• reflective print
• colour Hi-Vis yellow
Conforms to EN ISO 21420:2020 CE-category 1 (against minor hazard)
Work gloves Warm Long Hi-vis
Sizes 8-12
SH02708W-SH02712W
Children’s sizes 5-7
SH02705W-SH02707W
• goatskin palm, Softshell back
• waterproof PU membrane
• very warm fleece/cotton lining
• touchscreen surface on thumb and index fingers
• pre-shaped fingers
• short cuff
• reflective print
• colour Hi-Vis orange
Conforms to EN ISO 21420:2020 CE-category 1 (against minor hazard)
Waterproof and warm, excellent value for money
Applications
• cold and damp conditions
• for heavy-duty installation work
• winter outdoor work
• general use
• for winter sports and outdoor activities
Extremely warm winter glove, fleece + padding lining, preshaped fingers, good fit, waterproof membrane
Applications
• cold and damp conditions
• winter outdoor work
• for work where the glove must be visible
• general use
Extremely warm winter glove, fleece + padding lining, preshaped fingers, good fit, waterproof membrane
Applications
• cold and damp conditions
• winter outdoor work
• for work where the glove must be visible
• general use
Work gloves Warm Black
Sizes 8-12
SH02808W-SH02812W
Children’s sizes 5-7
SH02805W-SH02807W
• goat skin palm, softshell back
• waterproof PU membrane
• extra warm fleece/cotton lining
• touchscreen surface at the tips of the thumb and index finger
• shaped fingers
• short cuff
• reflective print
• colour black
Conforms to EN ISO 21420:2020 CE-category 1 (against minor hazard)
Extremely warm winter glove, fleece + padding lining, preshaped fingers, good fit, waterproof membrane
Applications
• cold and damp conditions
• winter outdoor work
• general use
Work gloves leather open cuff
Sizes 8-12
SH03608TW-SH03612TW
• 40% leather, 60% polyester
• lining 100% polyester (fleece)
• leather palm and forefinger
• polyester britex on back of the hand
• keystone thumb
• elastic band on wrist
Conforms to EN 420 CE-category 2 (against medium hazard)
EN 388:2016+A1:2018 test results:
• abrasion resistance 2
• cut resistance 1
• tear resistance 2
• puncture resistance 3
Work gloves leather with velcro
Sizes 7-11
SH03708TW-SH03712TW
• 45% leather, 55% polyester
• palm and fingertips leather
• polyester spandex on back of the hand
• adjustable cuff made of soft neoprene
• good dry grip
Conforms to EN 420 CE-category 1 (against minor hazard)
Also children’s sizes!
Fleece lining, elastic band wrist Leather craftsman glove with fleece lining, stays securely in place thanks to the velcro wrist strap
Applications
• for installation work and general use in cold working conditions
Applications
• for installation work and general use in cold working conditions
• construction
• assembly, warehouse, packing and loading work
Work gloves leather
Sizes 8-12
SH03808TW-SH03812TW
• sheepskin palm, spandex back
• waterproof PU membrane
• thin fleece liner
• reasonably good finger dexterity
• short open cuff
• colour black/blue
Conforms to EN ISO 21420:2020 CE-category 1 (against minor hazard)
Patron
Ideal for cold and wet weather installation work, waterproof membrane
Applications
• cold and damp conditions
• ideal spring/fall glove for wet outdoor work
• installation work
• construction
Work mittens PU coating
Sizes 9-11
SH02309W-SH02311W
• 54% polyester, 46% polyurethane
• lining 100% polyester
• water repellent
• structured PU palm ensures a good grip
• forefinger-thumb grip: own compartment for index finger
• adjustable velcro tightening on cuff
• reflectors
Conforms to EN 420 CE-category 1 (against minor hazard)
• general purpose work
Ergonomic grip: separate compartment for the index finger, good grip, water-repellent, extremely warm
Applications
• very warm mitten for cold conditions
• general use
Work gloves Spandex
Sizes 8-12
SH04308W-SH04312W
Children’s sizes 5-7
SH04305W-SH04307W
• 65% polyurethane, 35% polyester
• lining 100% polyester
• adjustable velcro tightening on cuff
Conforms to EN 420
CE-category 1 (against minor hazard)
Thin fleece lining, diamond-patterned polyurethane on the palm for a secure grip, velcro wrist strap
Applications
Also children’s sizes!
• for general use in cold working conditions, construction industry, loading, warehouses etc.
Work gloves Spandex
Sizes 8-12
SH04408W-SH04412W
Children’s sizes 5-7
SH04405W-SH04407W
• 60% polyuretane, 40% polyester
• lining 100% polyester
• structured PU palm - good grip
Conforms to EN 420 CE-category 1 (against minor hazard)
Work gloves safety cuff
Sizes 8-12
SH05908TW-SH05912TW
• 47% polyester, 32% polyurethane, 15% other fibers, 5% cotton, 1% elasthane
• lining 100% polyester
• safety cuff and reflecting piping on the wrist
• palm and fingertips durable polyurethane, good grip
Conforms to EN 420 CE-category 1 (against minor hazard)
Work gloves safety cuff
Sizes 7-12
SH06507W-SH06512W
• PU (polyurethane) palm, polyester spandex back
• thin, brushed fleece lining
• reflective piping
• diamond-patterned PU palm
• excellent grip
• good fit
• safety cuff
• color black/gray/orange
Conforms to EN ISO 21420:2020 CE-category 1 (against minor hazard)
Thin fleece lining, diamond-patterned polyurethane on the palm for a secure grip Polyester lining, good grip, reflective
Applications
• for general use in cold working conditions
• construction industry, loading work warehouses etc.
Also children’s sizes!
Applications
• for general use, construction industry, loading, warehouses etc.
Fleece lining, excellent grip, reflective
Applications
• cool and humid environments
• handling slippery objects
• heavy-duty work
• construction
• transport
• general purpose work
Work gloves nonwoven open cuff
Sizes 8-12
SH06208TW-SH06212TW
• 50% PU/PA-mixture, 50% polyamideia
• lining 100% polyester
• elastic on wrist
• suitable for chrome allergic persons
Conforms to EN 420 CE-category 1 (against minor hazard)
Patron’s trusted glove that suits many uses – durable, breathable, and allergen-free
Applications
• tasks requiring dexterity and tactile sensitivity
Get a firm hold of work
Work gloves for any task
Welder’s work gloves leather Welder’s work gloves leather
Sizes M-XXL
SH045M-SH045XXL
• oil and abrasion resistant grain leather (reversed)
• suitable for TIG welding because of excellent fit
• Kevlar stitchings
• reinforced seams on inner wrist and around thumb
EN 12477 type A/B test results:
• burning behaviour 4
• contact heat 1
• convective heat 3
• radiant heat X
• small splashes of molten metal 4
• large splashes of molten metal X
EN 388:2016+A1:2018 test results:
• abrasion resistance 3
• cut resistance 1
• tear resistance 2
• puncture resistance 1
Welder’s work gloves leather
Sizes M-XXL
SH048L-SH048XXL
• 100% goatskin
• douple leather in the palm
• very soft and excellent feeling
• very flexible, suitable for TIG welding
• cuff made of grey flame retardant fabric
EN 12477 type B test results:
• burning behaviour 4
• contact heat 1
• convective heat 2
• radiant heat X
• small splashes of molten metal 4
• large splashes of molten metal X
EN 388:2016+A1:2018 test results:
• abrasion resistance 2
• cut resistance 1
• tear resistance 1
• puncture resistance 1
Sizes L-XL SH046L-SH046XL
• durable split leather
• suitable for general welding tasks
• Kevlar stitchings
• cotton lining
EN 12477 type A/B test results:
• burning behaviour 4
• contact heat 1
• convective heat 3
• radiant heat X
• small splashes of molten metal 4
• large splashes of molten metal X
EN 388:2016+A1:2018 test results:
• abrasion resistance 3
• cut resistance 1
• tear resistance 3
• puncture resistance 4
Welder’s work gloves leather Arc Knight
Sizes M-XXL
SH2050M-SH2050XXL
• palm made of durable grain cowhide
• back of the glove made of split cowhide
• COMFOflex® lining at the back of the glove
• suitable for all welding applications, especially MIG/MAG welding
• flame retardant fabric 540 g/m² for the cuff
• KEVLAR® 3 ply
• shaped thumb, reinforcements on thumb seams
Conforms to EN 420
CE-category 2
EN 12477 type A
EN 407 test results:
• burning behaviour 4
• contact heat 1
• convective heat 2
• radiant heat X
• small splashes of molten metal 4
• large splashes of molten metal X
EN 388:2016+A1:2018 test results:
• abrasion resistance 2
• cut resistance (Coupe) 1
• tear resistance 3
• puncture resistance 1
• cut resistance (TDM) X
Welder’s work gloves leather
Sizes L-XXL
SH047L-SH047XXL
• oil and abrasion resistant grain leather (palm split leather)
• suitable for heavy welding tasks
• Kevlar stitchings
• reinforced seams on inner wrist and around thumb
• COMFOflex lining on back (air cushioned, sweat absorbent)
EN 12477 type A/B test results:
• burning behaviour 4
• contact heat 2
• convective heat 3
• radiant heat X
• small splashes of molten metal 4
• large splashes of molten metal X
EN 388:2016+A1:2018 test results:
• abrasion resistance 4
• cut resistance 1
• tear resistance 4
• puncture resistance 3
Work gloves leather
Sizes L-XL
SH2064L-SH2064XL
• 100% leather
• durable split cow leather
• oil and abrasion resistant surface
EN 388:2016+A1:2018 test results:
• abrasion resistance 3
• cut resistance 1
• tear resistance 3
• puncture resistance 1
Welder’s arm protectors leather
SH124
• thick split leather
Jokasafe gloves, manufactured in Evijärvi, Southern Ostrobothnia since 1960, are designed for demanding applications.
NEW! Now available with fossil-free BIOVYN™ vinyl.
The main raw material, BIOVYN™ vinyl, is made from pine oil, a byproduct of the forest industry. BIOVYN™ vinyl is a 100% renewable raw material, and its use reduces the carbon footprint by up to 74% compared to similar fossil-based raw materials.
Work mittens PVC JokaOiler
Sizes 8-10
SHJOILER-08R-SHJOILER-10R
• double-layer PVC (vinyl) coating, cotton lining
• protection against most chemicals
CE-category 3 (0403)
EN 388:2016+A1:2018 test results:
• abrasion resistance 4
• cut resistance 1
• tear resistance 2
• puncture resistance 1
EN374-1 (test chemicals):
• hydrochloric acid 37% 6
• nitric acid 10% 6
• sodium hydroxide 50% 6-K
• sulphuric acid 50% 6-L
• diesel oil, Shell winter grade 4
• phenol 92% 3
• mineral turpentine 3
• AIV 2 (formic acid 80%) 2
• heptane 2J
• acetic acid 100% 1
• methyl tert-butyl ether 1
• solution of ammonia, min 25% 1
• methanol 99,9% HPCL 1
Work gloves PVC JokaOiler
Sizes 8-11
SHJOIL35-08R-SHJOIL35-11R
• double-layer PVC (vinyl) coating, cotton lining
• flexible finger glove with long sleeve and thin cotton lining
• protection against most chemicals
CE-category 3 (0403)
EN 388:2016+A1:2018 test results:
• abrasion resistance 4
• cut resistance 1
• tear resistance 2
• puncture resistance 1
EN374-1 (test chemicals):
• hydrochloric acid 37% 6
• nitric acid 10% 6
• sodium hydroxide 50% 6-K
• sulphuric acid 50% 6-L
• diesel oil, Shell winter grade 4
• phenol 92% 3
• mineral turpentine 3
• AIV 2 (formic acid 80%) 2
• heptane 2J
• acetic acid 100% 1
• methyl tert-butyl ether 1
• solution of ammonia, min 25% 1
• methanol 99,9% HPCL 1
Work mittens PVC JokaTop
Sizes 9-10
SHJTOP-09R-SHJTOP-10R
• double-layer PVC (vinyl) coating, cotton lining
• rough surface provides non-slip grip and good wear resistance
• protection against most chemicals
CE-category 3
EN 511 (cold protection) test results:
• convective cold 1
• cold contact 2
• water penetration 1
EN 388:2016+A1:2018 test results:
• abrasion resistance 4
• cut resistance 3
• tear resistance 2
• puncture resistance 1
EN374-1 (test chemicals):
• hydrochloric acid 37% 6
• nitric acid 10% 6
• natrium hydroxide 50% 6-K
• sulphuric acid 50% 6-L
• diesel oil, Shell winter grade 4
• phenol 92% 2
• AIV 2 (formic acid 80%) 2
• acetic acid 1
• solution of ammonia, min 25% 1
BIOVYN™, protection against most chemicals
Applications
• handling and transporting of industrial oils and chemicals
• works at oil depots and service stations
• garbage disposal, water works and sewerage systems
• handling of pesticides and fertilizers
• construction and maintenance works
BIOVYN™, protection against most chemicals
Applications
• washing, cleaning and sorting
• handling of pesticides and fertilizers
• hot galvanizing
• production of titan dioxide and other chemicals
• painting
BIOVYN™, non-slip grip, wear-resistant, protection against most chemicals
Applications
• for sawmill industry, carpentry, metal- and machine workshop, agriculture and forestry, fishing and fish handling
Work gloves PVC JokaHold
Sizes 8-12
SHJHOLD-08R-SHJHOLD-012R
• double-layer PVC (vinyl) coating, cotton lining
• rough surface provides non-slip grip and good wear resistance
• protection against most chemicals
CE-category 3 (0403)
EN 511 (cold protection) test results:
• convective cold 1
• cold contact 2
• water penetration 1
EN 388:2016+A1:2018 test results:
• abrasion resistance 4
• cut resistance 3
• tear resistance 2
• puncture resistance 1
EN374-1 (test chemicals):
• hydrochloric acid 37% 6
• nitric acid 10% 6
• sodium hydroxide 50% 6-K
• sulphuric acid 50% 6-L
• diesel oil, Shell winter grade 4
• phenol 92% 2
BIOVYN™, non-slip grip, wear-resistant, protection against most chemicals
Applications
• AIV 2 (formic acid 80%) 2
• acetic acid 100% 1
• solution of ammonia, min 25% 1
Work mittens PVC JokaArctic
Sizes 9-10
SHJARC-09R-SHJARC-10R
• double-layer PVC (vinyl) coating, cotton lining
• removable lining
• protection against most chemicals
CE-category 3
EN 388:2016+A1:2018 test results:
• abrasion resistance 4
• cut resistance 1
• tear resistance 2
• puncture resistance 1
EN374-1 (test chemicals):
• hydrochloric acid 37% 6
• nitric acid 10% 6
• sodium hydroxide 50% 6-K
• sulphuric acid 50% 6-L
• diesel oil, Shell winter grade 4
• phenol 92% 3
• mineral turpentine 3
• AIV 2 (formic acid 80%) 2
• heptane 2J
• acetic acid 100% 1
• methyl tert-butyl ether 1
• solution of ammonia, min 25% 1
• methanol 99,9% HPCL 1
Work mittens PVC JokaTherm
Sizes 9-10
SHJTHERM-09R-SHJTHERM-10R
• double-layer PVC (vinyl) coating, cotton lining
• removable lining
• rough surface provides non-slip grip and good wear resistance
• protection against most chemicals
CE-category 3 (0403)
EN 511 (cold protection) test results:
• convective cold 1
• cold contact 2
• water penetration 1
EN 388:2016+A1:2018 test results:
• abrasion resistance 4
• cut resistance 3
• tear resistance 2
• puncture resistance 1
EN374-1 (test chemicals):
• hydrochloric acid 37% 6
• nitric acid 10% 6
• natrium hydroxide 50% 6-K
• sulphuric acid 50% 6-L
• diesel oil, Shell winter grade 4
• phenol 92% 2
• AIV 2 (formic acid 80%) 2
• acetic acid 1
• solution of ammonia, min 25% 1
• wood processing industry
• construction works and metal industry
• agriculture and forestry
• maintenance
BIOVYN™, protection against most chemicals
Applications
• handling and transporting of industrial oils and chemicals
• works at oil depots and service stations
• garbage disposal, water works and sewerage systems
• handling of pesticides and fertilizers
• construction and maintenance works
BIOVYN™, non-slip grip, wear-resistant, protection against most chemicals
Applications
• for maintenance and other outdoor work, unheated storehouse and harbour, oil- and gas industry, agricultural and forestry, fur industry, fishing and fish handling, winter activities
Work gloves PVC Jokapolar
Sizes 10-11
SHJPOLAR-10R-SHJPOLAR-11R
• double-layer PVC (vinyl) coating, cotton lining
• removable lining
• protection against most chemicals
CE-category 3
EN 511 (cold protection) test results:
• convective cold 1
• cold contact 2
• water penetration 1
EN 388:2016+A1:2018 test results:
• abrasion resistance 4
• cut resistance 3
• tear resistance 2
• puncture resistance 1
EN374-1 (test chemicals):
• hydrochloric acid 37% 6
• nitric acid 10% 6
• sodium hydroxide 50% 6-K
• sulphuric acid 50% 6-L
• diesel oil, Shell winter grade 4
• phenol 92% 2
Work gloves TopGrip
Sizes 7-10
SHJ5540-07-SHJ5540-10
• AIV 2 (formic acid 80%) 2
• acetic acid 100% 1
• solution of ammonia, min 25% 1
BIOVYN™, protection against most chemicals
Applications
• wood processing industry
• construction works and metal industry
• agriculture and forestry
• maintenance
Lined, water repellent, excellent grip
• water repellent neoprene, synthetic leather on palm side with granulated TopGrip® sewn to it
• Lined glove with extended cuff for professional and hobby use
• granulated TopGrip® fabric in palm and fingertips enables excellent and sturdy grip
• extended cuff protects from snow, dirt and spatter
Conforms to EN 420 CE-category 1 (against minor hazard)
Size 10
SHJTEDDYM-10
Gloves
Sizes 10-11
SHJTEDDYG-10-SHJTEDDYG-11
• this product can be used as a spare lining for JokaSafe gloves/mittens or with other gloves
• material acryl
• cleaning wash +40 °C
Applications
• outdoor and warehouse work
• when good grip is required
• transportation & logistics
• maintenance
• free time activities
• can be used in winter temperatures
Work gloves nitrile 2x
Sizes 6-10
SH377-06-SH377-10
• seamless
• warm and comfort
• nitrile coating up to the wristband
• palm side coated with foamed nitrile
• excellent grip
• length 250 - 280 mm
Conforms to EN 420: 2003+A1:2009
CE-category 2
EN 388:2016 test results:
• abrasion resistance 4
• cut resistant (Coupe) 1
• tear resistance 2
• puncture resistance 1
• cut resistant (TDM) X
Warm and comfortable, excellent grip
Applications
• construction
• installation and assembly
• maintenance
• mining
Work gloves nitrile 2x terry lining
Sizes 8-10
SH477-08W-SH477-10W
• 100% polyester / nylon / acrylic
• 2-fold nitrile coating
• 2-fold terry lining
• anatomical design
• fully seamless glove
• warm, flexible and waterproof
• the lining remains in place when the glove is removed from the hand
Conforms to EN 420:2003+A1:2009
CE-category 2
EN 388:2003 test results:
• abrasion resistance 4
• cut resistant 2
• tear resistance 3
• puncture resistance 1
EN 511:2006 test results:
• convective cold 0
• contact cold 1
• water penetration 1
Work gloves PVC
Sizes 9/11
SH660-09-SH660-11
• oil resistant PVC glove with seamless cotton lining
• ideal for handling work when oils, chemical substances or hydrocarbons are present
• recommended for use by those allergic to natural latex
CE-category 3
EN 388:2003 test results:
• abrasion resistance 4
• cut resistant 1
• tear resistance 2
• puncture resistance 1
EN 374-2 (AQL2) and -3:2003 test results:
• J n-Heptane 3
• K sodium hidroxide 40% 6
• L sulphuric acid 96% 3
• handling oil and gas
• warehousing and loading
• airports, ports
Warm, flexible, and waterproof
Applications
• suitable for e.g. agriculture, construction work, fishing, forestry, oil handling, cold storages etc.
Ideal for handling work when oils, chemical substances or hydrocarbons are present
Applications
• automotive, metallurgy and maritime sector
Showa
Disposable gloves nitrile
Sizes S-XL
SH01408N-SH01411N
• 100% nitrile
• thicker than normal nitrile gloves
• powder free
• silicone free
• natural latex free
• good resistance against chemicals
• suitable for food industry
• color blue
• fits both hands
• rolled wrist
• length 240 mm
• thickness 0,13 mm
CE 2777 category 3
EN 420
EN 374-2 class 2 (AQL 1,5)
EN 374-3 test results:
• sodium hydroxide 40% class 6
• ethanol 20% class 6
• ethidium brommide 1% class 6
• formaldehyde 1% class 6
• phosphoric acid 10% class 6
Disposable gloves nitrile
Sizes S-XL
SH01507M-SH01510M
• 100% nitrile
• powder free
• natural latex free
• suitable for food industry
• color black
• fits both hands
• rolled wrist
• length 240 mm
• thickness 0,08 mm
CE-category 1 (medical product)
CE 2777 category 3
EN 455 (protective gloves for hospital use)
EN 374-2 class 2 (AQL 1.5)
EN 374-3 test results:
• sodium hydroxide 40% class 6
• ethidium brommide 1% class 6
• ethanol 20% class 1
• hydrochloric acid 10% class 6
Disposable gloves vinyl
Sizes S-XL
SH01507V-SH01510V
• material 100% vinyl
• transparent
• powder-free
• fits both hands
• rolled wrist
• length 240 mm
• thickness 0,075 mm
• suitable for persons sensitized to natural rubber
• does not contain DOP softeners
• suitable for food industry, fat-free food
CE-category 1 (protection agains minor hazards)
EN 455 (protective gloves for hospital use) AQL 1,5
EN 374-3 test results:
• acetic acid 10% class 6
• chlorhexidine frm class 6
• glutardehyde 5% class 4
• hydrochloric acid 37% class 2
• nitric acid 50% class 6
• K - sodium hydroxide 40% class 6
Good resistance against chemicals, suitable for food industry
Applications
• food processing
• agriculture
• cleaning
• health care
• catering
Suitable for food industry suitable for food industry, fat-free food
• laboratories
Applications
• hairdressers, tattoo parlours, garages, cleaning, other personal protection
Applications
• food processing, agriculture, cleaning, health care, barbers
Work gloves cotton
Sizes 7-13
SH00107T-SH00113T
• 50% polyester, 50% cotton
• white knitted cotton tricot
Conforms to EN 420
CE-category 1 (against minor hazard)
Applications
• suitable for assembly, collecting and warehouses
12 pairs package
Work gloves latex-neoprene
Sizes 8-10
SHCASPIA-08-SHCASPIA-10
• latex protective gloves with neoprene coating
• for handling goods in dry and wet conditions
• against mechanical and chemical risks
• these gloves are not tested against viruses
• length 30 cm
EN 420:2003+A1:2009
EN ISO 374-5:2016
CE-category 3
EN 388:2016:
• abrasion resistance 2
• cut resistance 1
• tear resistance 1
• puncture resistance 0
• cut resistance (TDM) X
EN ISO 374-1:2016 / Type A:
• methanol (A) cl 2
• sodium hydroxide 40% (K) cl 6
• sulphuric acid 96% (L) cl 3
• nitric acid 65% (M) cl 5
• acetic acid 99% (N) cl 2
Work gloves nitrile
Sizes 8-11
SHGREBE-08-SHGREBE-10
• 100% nitrile, velour lining
• ammonium hydroxide 25% (O) cl 1
• hydrogen peroxide 30% (P) cl 6
• hydrofluoric acid 40% (S) cl 6
• formaldehyde 37% (T) cl 6
• penetration resistance cl 2 AQL<1.5
• degradation methanol 4,9%
• 40% sodium hydroxide 13,3%
• 96% sulphuric acid 26,4%
• 65% nitric acid 21,9%
• 99% acetic acid 22,7%
• 25% ammonium hydroxide 12,3%
• 30% hydrogen peroxide 6,5%
• 40% hydrofluoric acid not tested
• 37% formaldehyde 1,6%
• for handling goods in dry and wet conditions
• against mechanical and chemical risks as well as micro-organism
• these gloves are not tested against viruses
• length 33 cm
EN 420:2003+A1:2009
EN ISO 374-5:2016
CE-category 3
EN 388:2016:
• abrasion resistance 4
• cut resistance 1
• tear resistance 0
• puncture resistance 1
• cut resistance (TDM) X
EN ISO 374-1:2016 / Type A:
• methanol (A) cl 2
• sodium hydroxide 40% (K) cl 6
• n-Heptane (J) cl 6
• sulphuric acid 96% (L) cl 4
• ammonium hydroxide (O) cl 5
• formaldehyde (T) cl 5
• penetration resistance cl 2 AQL<1.5
• degradation methanol 48,4% (slight swelling)
• n-heptane 18,7% (slight swelling)
• 40% sodium hydroxide 9,1% (no change)
• 96% sulphuric acid 72,7% (severe swelling and colour change)
• 25% ammonium hydroxide 3,1% (slight swelling)
• 37% formaldehyde 35,4% (modeate swelling)
Brushed, against mechanical and chemical risks
Applications
• suitable for example chemical industry, machinery industry, warehouses, agriculture
Brushed, against mechanical and chemical risks as well as micro-organism
Applications
• suitable for example chemical industry, machinery industry, warehouses, agriculture, and food industry
Knitted cotton tricot
Cerwa work gloves
Come find your perfect pair from IKH!
Information about glove materials
Synthetic materials
Polyvinyl chloride, PVC, offers excellent resistance to oils, water-soluble chemicals, and abrasion. It provides only limited protection against organic solvents. This flexible material retains its softness even in cold conditions.
Polyurethane, PU, is a breathable, high-grip material that provides protection against vegetable and animal fats as well as oils. It offers excellent abrasion resistance and remains flexible even at low temperatures.
Nitrile is a blend of butadiene and acrylonitrile, offering exceptional abrasion resistance. It provides excellent protection against oil-based chemicals such as gasoline, oil, lubricants, and many solvents. When dry, nitrile gloves offer a superior grip.
Neoprene is not as durable as nitrile but maintains its elasticity well, even in cold conditions. It provides protection against oils, fats, organic hydrocarbons, and acids.
Latex
Natural rubber, also known as latex, is highly flexible, elastic, and abrasion-resistant. It provides excellent protection against alcohols and water-soluble chemicals.
Leather
Pigskin leather is porous due to small holes left by the bristles, allowing it to breathe well, but it does not repel moisture. It softens with use.
Cowhide leather is durable and suitable for heavy wear. It provides a firm grip and offers good protection against moisture.
Split cowhide leather is used in welding gloves due to its excellent thermal insulation properties.
Goatskin leather is extremely durable, moisture-repellent, and soft due to the lanolin it contains. Sheepskin leather is ideal not only for heavy-duty use but also for tasks requiring precision, such as gloves that demand good fingertip sensitivity.
Butyl rubber does not stretch and can feel somewhat stiff in use. It withstands cold conditions well and provides excellent protection against ketones (e.g., acetone), esters, strong acids, aldehydes, amides, amines, and alcohols.
Amara fiber is a blend of polyamide and polyurethane, making it suitable for gloves used by individuals with chromium allergies. It offers good abrasion resistance in dry conditions.
Polyester, PES, is widely used as a glove material due to its excellent color retention, easy maintenance, and abrasion resistance. Polyester does not shrink or stretch.
Polyamide (nylon) is an extremely durable and lightweight material with excellent abrasion resistance.
Cotton
Cotton is a highly breathable material that does not generate static electricity. It is comfortable against the skin and is most commonly used in liner gloves and as a lining material.
Top-grain leather is the smooth outer surface of the leather. It is a soft, durable, high-grip, and moisture-resistant glove material with excellent heat resistance.
Split leather is the inner layer of leather obtained by splitting the hide lengthwise. The surface becomes uneven and fuzzy, providing a good grip. Split leather is porous and allows moisture to pass through more easily than top-grain leather. However, it remains a durable glove material with better heat resistance than top-grain leather.
Categories of protective gloves
Protective gloves are divided into three categories based on the type of hazards and risks they protect the wearer from.
Category 1: Protection against minimal hazards only
The CE mark indicates that the product is compliant with the Regulation (EU) 2016/425 on personal protective equipment. Gloves that are suitable for, for example, gardening or other light tasks with a minimal risk of injury.
Category 2: Protection against intermediate hazards – all gloves not in category 1 or 3. Protection against mechanical hazards. Intended for more complex use.
In addition to the CE mark, the product is marked with a pictogram indicating the protection properties. These gloves are usually tested according to the standard EN 388. Category-2 gloves are intended to protect the wearer from injuries that are not classified as minimal nor very high.
Standards for protective gloves
EN ISO 21420 / EN 420 Protective gloves. General
• The gloves themselves must not present a risk or hazard.
• The pH level of the gloves must be neutral; the pH level of leather gloves should be between 3.5 and 9.5.
• The highest permissible level of chromium content is 3 mg/ kg (hexavalent chromium).
Category 3: Protection against very serious hazards
Gloves designed to protect the wearer from serious risks and hazards are used when there is a risk of a serious or permanent injury, for example, when handling aggressive chemicals. The number following the CE mark is the identifier of the accredited institute monitoring the product’s conformity with the relevant standards.
• The manufacturer must indicate if substances known to cause allergies have been used in the glove material.
A Abrasion resistance
The material is sanded under steady pressure. The performance level falls between one and four, depending on how many cycles the glove can handle without breaking. The higher the performance level, the better the abrasion resistance – see the table.
B Circular blade cut resistance (Coupe)
The smallest number of cycles (circular blade) to break the glove material is determined. The performance level falls between one and five with five being the best result.
C Tear resistance
First, the glove is cut. Then, the force (N) required to tear the cut is measured. The property of tear resistance indicates the glove’s mechanical strength. In general, the higher the performance level value, the better. However, a lower performance level is ideal in situations where the glove might get stuck in the working parts of a machine, for example. The performance level is between one and four.
D Puncture resistance
It is determined how much force (N) is required to puncture the glove material
with a pin (resembling a nail, not a thin needle). Puncture resistance does not indicate the gloves’ resistance to injection needles. The performance level is between one and four.
E Straight blade cut resistance (TDM)
It is determined how much force is required to cut the glove material with a straight, falling blade. Performance level scale A–F / 2–30 newtons (10 newtons = 1 kg).
F Impact resistance
Impact resistance is tested with an impact force of 5 joules. The test is only conducted on gloves that are resistant against impact and only around the protected area (knuckles). This is a pass/fail test. If the glove passes the test, a ’P’ will be shown on the glove marking.
If a test result is ’0’, the glove falls below the minimum performance level. If any of the test results have an ’X’ next to them, it means that the property in question has not been tested.
Protective gloves against thermal risks
1 Flammability
The glove material is stretched and lit by using a gas flame. The material must be in contact with the open flame for, at least, 15 seconds. Then, it is measured how long it will take for the material to stop burning or glowing. If there is a risk of the gloves being in contact with open flame, the material must meet the requirements of performance level 3.
2 Contact heat resistance
The glove material is exposed to a heat source between 100 and 500°C. The test measures how long it will take for the glove’s core temperature to rise 10°C higher than the material’s initial temperature (around 25°C). The material must be exposed to heat for, at least, 15 seconds. Level-2 glove material is an exception
to these requirements. Level-2 material must endure, at least, 250°C for, at least, 15 seconds until the material’s temperature reaches +35°C.
3 Convective heat resistance
This test determines how long it will take for the temperature of the inner surface of the glove material to rise to 24°C when the material is warmed up with a gas flame (80 Kw/m2).
4 Radiant heat resistance
The glove material is stretched in front of a heat source of 20–40 kW/m2. The average time of thermal transfer of 2.5 kW/ m2 is measured. The highest performance level is 4, which means that the glove protects the wearer from radiant heat for, at least, 150 seconds.
5 Small splashes of molten metal
The test is based on the measurement of the number of droplets of molten metal. The test determines the number of molten metal droplets needed to raise the temperature between the material and skin to 40°C. The highest performance level is 4, which is equivalent to, at least, 35 droplets.
6 Large splashes of molten metal
An artificial PVC hood is attached to the inner side of the glove material. Molten iron is then poured on top of the glove material. The test measures how many grammes of molten iron are needed to damage the PVC layer.
Protective gloves for welders
• The requirements of EN 12477 are a combination of the requirements of standards EN 388 and ISO 23407 / EN 407.
• The gloves protect the wearer against splashes of molten metal, short-term exposure to open flames, convective and radiant heat, and mechanical risks, for example.
• The gloves are divided into two categories based on their structure and end use – type A and type B.
511
Protective gloves against cold
• Type-A gloves provide better heat protection but are not very flexible.
• Type-B gloves have a lower heat resistance but are more flexible and provide better dexterity. EN 511
The test determines the material’s capacity to conduct cold as well as its isolation capacity (in contact). Three numbers are given next to a pictogram. The first number indicates the material’s resistance to penetrating cold. The second number indicates the material’s resistance to cold when in contact with cold objects. The higher the performance level, the better the material’s isolation capacity. The final number shows whether water can penetrate the material in 30 minutes (0 = yes, 1 = no).
• A Convective cold (performance level 0–4)
• B Contact cold (0–4)
• C Water penetration (performance level 0 or 1)
12477
Protective gloves against dangerous chemicals and micro-organisms
Approximately 15,000 different chemicals are used in industry and households in Finland. Tested and approved protective gloves against chemicals are necessary to protect the wearer from injury. The right choice of gloves depends on the chemical type and how long the chemical will be handled.
It is recommended to ”quick test” the gloves before use: if the gloves harden or swell upon contact with the chemical being used, the material is incorrect.
Degradation refers to the destructive effect a chemical has on the material.
Penetration refers to the flow of chemicals and microorganisms that pass through porous materials, seams, small holes, or minor defects in the material.
Permeation refers to the process in which a chemical passes through the protective material at the molecular level. Additionally, if the outer surface of the material is porous, it can act like a sponge, absorbing the chemicals. For this reason, it is crucial to measure the permeation time.
Protective gloves against chemicals are divided into three types based on their permeation resistance level: type A, type B and type C.
ISO 374-1/Type A
U V W X Y Z
Type A: the chemical permeation resistance level must be at least 2 for at least six test chemicals specified in the table below.
ISO 374-1/Type B
U V W
Type B: the chemical permeation resistance level must be at least 2 for at least three test chemicals specified in the table below.
ISO 374-1/Type C
Type C: the chemical permeation resistance level must be at least 1 for at least one test chemicals specified in the table below.
ISO 374-5
Protective gloves against chemicals can also protect the wearer from micro-organisms, i.e. bacteria, viruses or microscopic fungi.
Gloves protecting from viruses, bacteria and fungi are tested by conducting a virus penetration test and/or a bacteria
A Methanol 67-56-1 primary
dichloride
chlorinated hydrocarbon
E Carbon disulphide 75-15-0 organic compound containing sulphur
F Toluene 108-88-3 aromatic hydrocarbon
G Diethylamine 109-89-7 amine
H Tetrahydrofuran 109-99-9 heterocyclic ether compound
I Ethyl acetate 141-78-6 ester
J n-Heptane 142-85-5 saturated hydrocarbon
K Sodium hydroxide 40% 1310-73-2 mineral alkali
L Sulphuric acid 96% 7664-93-9 inorganic mineral acid
M Nitric acid 65% 7697-37-2 inorganic mineral acid
N Acetic acid 99% 64-19-7 organic acid
O Ammonium hydroxide 25% 1336-21-6 organic base
P Hydrogen peroxide 30% 7722-84-1 peroxide
S Hydrofluoric acid 40% 7664-39-3 inorganic mineral acid
T Formaldehyde 37% 50-00-0 aldehyde
or fungi penetration test.
AQL (Acceptable Quality Level): a glove must not leak air and/or water and it must meet specific production quality requirements. AQL is the share of broken or leaking gloves in a production batch.
4.0
