Page 1

International Journal of Engineering and Techniques – Volume5 Issue6 December2019

IOT BASED INTELLIGENT BABY CARE SYSTEM WITH A WEB APPLICATION FOR BABY MONITORING. (Dr.P.P.Halkarnikar1,Rutik Bankar2 ,Vishal Salve3,Tejas Gavali4) 1(Computer Department, DYPIEMR, Akurdi, Pune Email: pp.halkarnikar@dypiemr.ac.in ) 2 (Computer Department, DYPIEMR, Akurdi, Pune Email: rutikbankar1@gmail.com ) 3 (Computer Department, DYPIEMR, Akurdi, Pune Email: salvevishal15@gmail.com ) 4 (Computer Department, DYPIEMR, Akurdi, Pune Email: gavalitejas100@gmail.com )

Abstract: This paper presents an idea to design a Smart Cradle System using IOT which will help the Parents to monitor their child even if they are away from home & detect every activity of the Baby from any distant corner of the world. It is an innovative, smart & protective Cradle System to nurture an infant in an efficient way. This system considers all the minute details required for the care & protection of the Baby in the cradle. Keywords — Intelligent Baby Care System, Internet Of Things, Deep Learning.

I.

INTRODUCTION

Today’s lifestyle is fast paced. Most of the working parents find a bit difficult to manage work along with babysitting. They cannot keep an eye on their child all the time and is hard after long working hours. To sooth the baby by manually swinging the cradle might not be possible in such case. If they have taken help of babysitter for it then also baby’s safety related thoughts keep going in their minds. Hence there is need of product which bridges this gap between parents and baby. This cradle system is proposed to help these parents, so that they can take good care of their baby. This cradle system consists of following points.

1. Automatic swinging of cradle starts on the detection of baby cry sound. 2. Sounds an alarm and sends an alert on the web page when baby does not stop crying after specific time. 3. Sends an alert if mattress is wet. The bed wet alarm is useful to keep healthy environment near baby and the second alarm is useful to give attention whenever baby needs. This information can be transmitted to web page through cloud server with the help of an App. The benefit of

such alert is that the parent can get to know baby status anywhere, anytime because of internet.

1


International Journal of Engineering and Techniques – Volume5 Issue6 December2019 As we are very well familiar with the hurdles

IV.

BLOCK DIAGRAM

faced by Parents to nurture their infant and especially in case if both the Parents are working. To give 24 hours of time in such cases is next to impossible. Thus, we need to develop something unique that can help Parents to have a continuous

surveillance/watch

on

the

Baby/Infant and can notify about the same. Thus, we have come up with an idea to design a Smart Cradle System using IOT which will help the Parents to monitor their child even if they are away from home & detect every activity of the Baby from any distant corner of the world.

II.

EXISTING SYSTEM

In this existing system Multiple sensor are used to know the condition of baby but that will restrict in particular space where if any problem the parents have to be in that space and they will

MONITORING SYSTEM

check the condition of baby manually.

III.

PROPOSED METHOD

In this newly proposed system, both the sensors and forecasting cloud is used, so that resulting data will have high accuracy about the baby’s condition, also we are using surveillance of the baby using camera from a Wide Area Network

V. BLOCK DIAGRAM DESCRIPTION

(WAN) which can be viewed in the Web Application of parents phone and also can control the situation from a remote

area

In this project MCP3008 is used, so to connect 3.3v pin from the raspberry pi to all sensors

anywhere from the world. 

Similarly MCP3008 and all sensor’s and ground pins should be grounded 2


International Journal of Engineering and Techniques – Volume5 Issue6 December2019 

Now connect the sensor’s output pins to each

VII. CONCLUSION

channels of MCP3008 (ex: LM-35 to channel 0,

According to the IOT based system it analyses

HUMIDITY to channel 1 and the SOUND

the baby’s Activities with Video Enhancement

sensor to channel 2 of MCP3008)

and Instant WEB Application Notification for

Connect USB web camera with raspberry pi

Better Monitoring of Baby. Atomization of

Connect the power supply for Raspberry pi

System with Real-Time Database system in the

Plug the HDMI cable in Raspberry pi from the

cloud

monitor system using VGA to HDMI converter

monitoring of the baby easy.

server,

accurate

sensors

make

the

cable 

Connect USB Mouse and the USB keyboard to the Raspberry pi system.

VIII

ACKNOWLEDGMENTS

We are grateful to our Department of Computer Science & Technology for their support and for

VI. HARDWARE REQUIREMENTS

providing us an opportunity to review such an

Raspberry Pi

interesting topic. While reading and searching

Temperature (LM 35)

Humidity Sensor

Sound Sensor

MCP3008(ADC IC)

USB Camera

[1] “IoT Based Smart Cradle System with an

SD card

Android App for Baby Monitoring”, 2017

Monitor

concerning this subject we tend to learn concerning varied vital and interesting facts

REFERENCES

International

Conference

Communication,

Control

on

Computing,

and

Automation

(ICCUBEA).

SOFTWARE REQUIREMENTS

[2] “Video-based IoT baby monitor for SIDS

Raspbian Jessie

HTML and PHP

Technology Conference (GHTC)

MQTT Protocol

[3] "Sudden Unexpected Infant Death and

Language – Linux

Sudden Infant Death Syndrome", Centers for

Python

Disease Control and Prevention. Centers for

prevention” in 2017 IEEE Global Humanitarian

Disease Control and Prevention 17 Apr. 2017, May 2017 [4] Marie R. Harper, La Mirada, Maxine R. Blea:, “Automatically rocking baby crdle", US3769641, Date of Patent: Nov. 6, 1973. 3


International Journal of Engineering and Techniques – Volume5 Issue6 December2019 [5] Gim Wong:, “Automatic bay crib rocker",

Metabolic Algorithm", School of Information

US3952343, Date of Patent: Apr. 27, 1976.

Science

and

Engineering,

Central

South

University, China. [6] Chau-Kai-Hsieh, Chiung Lin, Taiwan:, “Baby cry recognizer", US5668780, Date of

[9]

Patent Sep. 1997.

“Automatic cradle movement for infant care",

[7]

Steven

Bang;

Richard

Lam;

Natalia

LoCicero;“Rock Me Baby: The automatic baby

Anritha

Undergraduate

Ebenezer,

Academic

Anupreethi

S;

Research Journal

(UARJ), ISSN: 2278-1129, vol-1, Issue-1, 2012.

rocker" Project for, San Jose State University,

[10] Misha Goyal and Dilip Kumar; “Automatic

Department of Mechanical and Aerospace

E-Baby Cradle swing based on Baby Cry ",

Engineering, May 17,2011.

IJCA, June2013.

[8] Yang Hu, Weihua Gui; “Adaptive sway control for baby bassinet based on Artificial

4

IOT BASED INTELLIGENT BABY CARE SYSTEM WITH A WEB APPLICATION FOR BABY MONITORING.  

Dr.P.P.Halkarnikar,Rutik Bankar,Vishal Salve,Tejas Gavali

IOT BASED INTELLIGENT BABY CARE SYSTEM WITH A WEB APPLICATION FOR BABY MONITORING.  

Dr.P.P.Halkarnikar,Rutik Bankar,Vishal Salve,Tejas Gavali

Advertisement