Issuu on Google+

DryLin速 specialists

DryLin速 Specialists Telescopic guides Measuring systems Roller guides Square linear guide Slide disks

863


DryLin® specialists

DryLin® Specialists | Product Overwiew DryLin® NT – Telescopic rails Lubrication-free solid polymer/aluminum guide for continuous lengths up to 1,200 mm extension. page 865 DryLin® NT – Telescopic rails with locking mechanism The proven DryLin® N telescopic system is now available with a locking mechanism. page 866

NEW!*

There are two different versions: a) Detent in end and centre positions b) Precision detent with variable pitch (minimum pitch 10 mm) page 866 DryLin® WKM – Digital measuring systems The DryLin® WKM measuring systems are battery powered. The integrated battery has a life of at least two years. Magnetic tapes fitted as standard. The position value is displayed on a 5-digit LC display. page 867 DryLin® WKMEX – Measuring system Much less space is required for the latest DryLin® WKMEX measuring device. The sensor head is integrated in the carriage (total height 36 mm). There are three sensor types available, two are compatible with TTL Line Driver. We recommend igus® E-Chain® series E2 micro or Easy Chain® for guiding the signal cable. page 868

NEW!*

NEW!*

DryLin® WJRM – Hybrid bearing An additional DryLin® W solution is the combined rolling and sliding carriage. In the defined load direction the required drive force is reduced by the maintenance free roller bearing. page 870 DryLin® Q – Torque-resistant square guide DryLin® Q is the new torque resistant linear slide for the spacesaving handling of small parts. Four liners made of iglidur® J run on a hard anodized aluminum square tube. This unit is light weight, compact and 100 % lubrication-free. page 869

NEW!*

DryLin® round slide disk The DryLin® – Slide disks from stock (RSDJ – Round Slide disk) – made from the high performance material iglidur® J have many applications. Without additional lubricant, heavy loads can be moved over a variety of surfaces (steel, aluminum, stainless steel, etc.) with very low friction. The plates are fixed securely with a screw through the reinforced hole in the centre. page 872

NEW!*

* in this catalog

864

More information

www.igus.co.uk/drylinspecialists


DryLin® specialists

DryLin® Telescopic Rails | Product Range NT-35-“L” – Total extension

Solid polymer guide/aluminum guide Low weight Cost-effective Corrosion-resistant Continuous lengths up to 1,200 mm (total extension)

NT-35-“L” – Total extension

Order key

C5 = 20–49.5 mm

L

NT-35-300

L

60

C6

C6 = 20–49,5 mm

60

Retracted length L Rail width: 35 mm Telescopic-System

C5

NT-35-“L”-“L+20” – Over-extension

Order key

NT-35-300-320

L

20

L

Over extension (e.g. telescoped length 300 mm, extended length 620 mm; Over extension max. 20 mm) Retracted length L Rail width: 35 mm Telescopic-System

NT-35-“L”-“A” – Partial extension

Order key

NT-35-300-200

L A

L

Partial extension (e. g. telescoped length 300 mm, extended length 500 mm) Retracted length L Rail width: 35 mm Telescopic-System

19

35

M4

Recommendation:

F= = 75 N · (200 mm/L)

Fmax calculated using this formula allows an easy manual use. The unit can take higher forces than this, but the required driving force will be correspondingly higher.

Dimensions [mm] Part number NT-35-… mm

b

H

L min.

L max.

35

19

100

600

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 865


35 35

NEW in this catalog! ®

DryLin® specialists

DryLin Telescopic Rails | Product Range

With locking mechanism Order key

NT-LM-35-300 C5 = 20–49.5 mm

L mm C5 = 20–49.5 60 L 60

The proven DryLin® N telescopic system is now available with a locking mechanism. There are two different versions: a) Detent in end and centre positions b) Precision detent with variable pitch (minimum pitch 10 mm)

Retracted length L Rail width:L35 mm L 60 20–49.5 mm Mechanism C6 = Locking C5 = 20–49.5 mm C6 Telescopic-system 60 C5

Solid polymer/aluminum guide Low weight, quiet running 20 L Cost-effective 20 L Corrosion-resistant, 100 % lubrication-free Continuous lengths up to 1,200 mm (extended total length)

L

L

C5 = 20–49.5 mm C5 = 20–49.5Lmm

L L B B

L

L 60

C6 = 20–49.5 mm L

60

C5

60

C6 = 20–49.5 mm

60

C5

LL

19 19

L

L

20

L

M4

M4 35

20

35

L

Fmax = 75 N x (200 mm/L)

Fmax = 75 N x (200 mm/L)

L B

L

L

B

L

19 19 M4 M4

Fmax = 75 N x (200 mm/L) Fmax = 75 N x (200 mm/L)

DryLin® NT-LM in adjustment of Perspex guard

DryLin® NT-LM in guard door adjustment in machine tool

DryLin® – Detent in end and centre position at full extension – Dimensions [mm] Part number NT-LM-35-...mm

B

H

Lmin

Lmax

35

19

140

600

individual precision detent on request

delivery 3–8 days time

prices price list online www.igus.co.uk/drylinspecialists

866 Lifetime calculation, CAD files and much more support

order part number example NT-LM-35-…

www.igus.co.uk/drylinspecialists


DryLin® specialists

DryLin® Measuring Systems | Product Range

The DryLin® WKM measuring systems are battery powered. The integrated battery guarantees two year operating time. This means a virtually absolute distance measurement is possible. Magnetic tapes fitted as standard. The position value is displayed on a 5-digit LC display. Measuring principle: magnetic with magnetic tape (10 · 1.4 mm) Resolution: 0.1 mm Accuracy: ±(0.1 + 0.01 · measured length [m]) mm Service life: over 5 years at 100 % switch-on time Application temperature: +0 to +60 °C Display: LCD Repeat accuracy:±1 Digit

Absolute and incremental measuring method Flexible and mobile use Variable zero point Carriage can be clamped Display optionally right (R) or left (L) of guide carriage Max. rail length 4,000 mm (Effective measurement max. 3,757 mm)

Type series WKM-10 and -20

H

E

For the series 10 and 20 the rails are fixed and the measuring carriage moves.

Part number WKM-10-80-15-01-L

DryLin® linear guide WK-10-80-15-01*

WKM-10-80-15-01-R WKM-20-80-15-01-L WKM-20-80-15-01-R

WK-10-80-15-01* WK-20-80-15-01* WK-20-80-15-01*

* Dimensions rail/slide

H

E

36

93

36

93

40 40

93 93

H

E

Dimensions [mm]

DryLin® W chapter, page 763

Type series WKM-11

For the series 11, the carriage is fixed with 4 screws. The rail moves, the end of the rail is the fixing point.

Dimensions [mm] Part number

L

C4

C5

a1

C2

A2

K1

C

A

H

S

Cm

Hm

kz

40

20

18

120

80

8.6

133

73

24

8

100

54

82

max.

WKM-11-40

2,000

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 867


DryLin® specialists

NEW in this catalog! ®

DryLin Measuring Systems | Product Range

Measuring-system with external signal output

Order key WKMEX-10-80-10-2.5-00-01-1500 01 11 Much less space is required for the latest DryLin® WKMEX measuring device. The sensor head is integrated in the carriage (total height 36 mm). There are three sensor types available, two are compatible with TTL Line Driver. We recommend igus® E-Chain® series E2 micro or Easy Chain® for guiding the signal cable. Ready-to-fit measuring device for external signal output With 4 edge trigger mode (setting parameters of the display or control, for example, IW4) and +20 °C ambient temperature: Resolution: ±(0.025 + 0.02 · L) L = measuring length in metres; Repeatability: ±0.025 mm With 1 edge trigger mode (setting parameters of the display or control, for example, IW1) and +20 °C ambient temperature: Resolution: ±(0.1 + 0.02 · L) L = measuring length in metres; Repeatability: ±0.025 mm

Rail length Number of complete carriages Sensor version in Table Length of signal cable (m)

Energychain 045.10.028.0 not included in product

Signal cable

A

A2

K2

Small sensor with integrated evaluation unit C2

H2

C

Dimensions [mm] Part number WKMEX-10-80

H2

C

C2

A

A2

K2

Resolution

36

100

87

107

70

M6

0.1

Versions Sensor type 00 01 11

delivery available time from stock

Nominal voltage

Output power

Max. length of signal cable

10–30 V

10–30 V

30 m

10–30 V 5V

TTL Line Driver TTL Line Driver

50 m 10 m

prices price list online www.igus.co.uk/drylinspecialists

868 Lifetime calculation, CAD files and much more support

order part number example WKMEX-10-80

www.igus.co.uk/drylinspecialists


NEW in this catalog! ®

DryLin® specialists

DryLin Q Square Guide | Product Range Torque-resistant square guide

Order key

QJRMT-05-20 Dimension across flats Pillow block, short Tandem (optional) Metric Form of Housing, closed iglidur® J bearings Square design

Square section tube made of hard-anodized aluminum Closed anodized aluminum housing Torque resistant without 2nd guidance Tolerates moments up to 10 Nm Space saving and low weight Cable guidance possible in tube Unsupported installation Lubrication-free

Dimensions [mm] Part number

Weight

DryLin Q rail profile

H ±0. 02

0.55

AWMQ-20 Part number

A

[kg]

®

Weight

DryLin Q Housing Bearing

A

[kg]

®

62 H

H1

dQ

Qa

27 Qi

±0.02

E1

E2

±0.15

±0.15

d

L

QJRMT-05-20

0.55

62

27

54

25

20

15

48

55

28

85

QJRM-05-20

0.25

62

27

54

25

20

15

48

55

28

40

Part number

Weight

k

d2

Bf

d

Qa

Qi

d

B

DryLin® Q Flange Bearing

[kg]

h7

d3

dt

±0.15

±0.15

QJFMT-02-20

0.24

50

40

11

25

20

15

62

51

28

112

QJFM-02-20

0.14

50

40

11

25

20

15

62

51

28

58

delivery available time from stock

prices price list online www.igus.co.uk/drylinspecialists

order part number example QJRMT-05-20

igus® (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 869


NEW in this catalog! ®

DryLin WJRM Hybrid Bearing | Product Range C1

Hybrid bearing – roll and slide

C3

A3

DryLin® specialists

G1

DryLin® W Hybrid bearings offer a unique combination of plain and roller bearings. At a defined installation position, the required driving torque reduces significantly due to the maintenance-free roller bearings. Shear forces and shock loads are absorbed by the plain bearing. The hybrid bearing is ideal for manual adjustments, especially in door slides. C1 Shaft-mounted plastic rollers Liner made of iglidur® J Low drive force needed, friction: 0.04–0.05 µ Cost-effective Can be combined with 7 linear profile rails

G1

WJRM-01-10 WJRM-01-16 WJRM-01-20 H

K2

B

K2

B

B2

WJRM-01-10 WJRM-01-16 WJRM-01-16 WJRM-01-20 WJRM-01-20 Q1 H Shown installation position is not possible for combination of WJRM-01-10 with rail WS-10/WS-10-40/WS-10-80 Q2

A1

K3

Q2

B2

WJRM-01-16 WJRM-01-20

A1

K3

A3

C3

DryLin® W Housing Bearing, Round – Load Data and Dimensions [mm] Part number

Static load capacity Co

Q1

Dyn. load capacity Cz+ at total running distance (km

F·v

10

100

200

max.

[N]

[N]

[N]

[N]

[N · m/s]

WJRM-01-10

250

250

90

50

50

WJRM-01-16 WJRM-01-20

400 550

400 550

140 200

70 100

80 80

DryLin® W Housing Bearing – Load Data and Dimensions [mm] Part number

Friction in Weight +z direction

B

B2

C1

C3

G1

A3

A1

K2

[g]

K3

Q1

Q2

[N]

WJRM-01-10

< 0.1

46

26

2.5

35

22

27

6.5

16.5

M6

M5

WJRM-01-16 WJRM-01-20

< 0.1 < 0.1

131 232

34.5 42.5

5 6

48 52

30 34

33 38

9 9

25 30

M8 M8

M6 M6

32 37

28 37

DryLin® W guide rail

delivery available time from stock

page 770

prices price list online www.igus.co.uk/drylinspecialists

870 Lifetime calculation, CAD files and much more support

order part number example WJRM-01-10

www.igus.co.uk/drylinspecialists


NEW in this catalog! 速

DryLin WJRM Hybrid Bearing | Application Examples

DryLin速 specialists

Adjustment of control panel unit

Adjustment of sliding door tool magazine

Adjustment of wood panel

Adjustment of camera mounting slide www.igus.co.uk/cam

igus速 (UK) Ltd. Northampton NN4 7PW | Phone +44 (0) 1604-677240 Fax -242 | www.igus.co.uk 871


DryLin® specialists

NEW in this catalog! ®

DryLin Round Slide Disk | Product Range

DryLin® round slide disk

Order key

RSDJ-40-06 Thickness Outer-Ø iglidur® J Round slide disk

s

Material: iglidur® J

Da

K

page 89

The DryLin® – slide disks from stock (RSDJ – round slide disk) – made from the high performance material iglidur® J have many different applications. Without additional lubricant, heavy loads can be moved over a variety of surfaces (steel, aluminum, stainless steel, etc.) with very low friction. The plates are fixed securely with a screw through the reinforced hole in the centre.

Dimensions [mm] Part number

Outer-Ø

Wear limit

Da

Thickness For countersunk screw Max. static load capacity s

K

[N]

RSDJ-40-06

40

1.5

6 ± 0.05

M6

28,500

RSDJ-60-08 RSDJ-80-08

60 80

2.5 2.5

8 ± 0.05 8 ± 0.05

M8 M8

66,000 120,000

Please, use our different bar stock dimensions for your individual design page 555

delivery available time from stock

prices price list online www.igus.co.uk/drylinspecialists

872 Lifetime calculation, CAD files and much more support

order part number example RSDJ-40-06

www.igus.co.uk/drylinspecialists


DryLin Specialists