Page 1

keep your car shining for years

EN

i


Stella

With Idrobase water inlet kit: 2-year warranty

MADE IN ITALY

>1450 >1750 Rpm 50Hz

Rpm 60Hz

Optional, With Idrobase inlet water kit: 2-year warranty

Professional h. p. washer Stella enables a perfect wash, easily, safely and effortlessly. Ideal for companies that use the pressure washer up to 8 hours a day.

FRAME

Made of chromed steel with protective polyester paint

VISIBLE PUMP

Professional: 50% less maintenance time

COMFORT LINE SWIVEL ACCESSORIES

When working helps well-being

Kit of lift brackets Optional

CopyrightŠ Idrobase Group. All rights reserved.


Hot Water Technical data Code

ZX.2133

Model

Version

Pressure

Fl. rate

Rpm

Temperature

Power

Wght

1450 150/15

By-pass

150bar

15l/min

1450

45 - 80°C *

5.5hp (3x400V-50Hz)

136kg

1450 150/15 TS

Total Stop

150bar

15l/min

1450

45 - 80°C *

5.5hp (3x400V-50Hz)

137kg

1450 200/15

By-pass

200bar

15l/min

1450

45 - 80°C *

7.5hp (3x400V-50Hz)

151kg

1450 200/15 TS

Total Stop

200bar

15l/min

1450

45 - 80°C *

7.5hp (3x400V-50Hz)

152kg

1450 150/21

By-pass

150bar

21l/min

1450

45 - 65°C *

7.5hp (3x400V-50Hz)

151kg

ZX.2146-TS

1450 150/21 TS

Total Stop

150bar

21l/min

1450

45 - 65°C *

7.5hp (3x400V-50Hz)

152kg

ZX.2133-60

1750 150/15

By-pass

150bar

15l/min

1750

45 - 80°C *

5.5hp (3x400V-60Hz)

136kg

Total Stop

150bar

15l/min

1750

45 - 80°C *

5.5hp (3x400V-60Hz)

137kg

By-pass

200bar

15l/min

1750

45 - 80°C *

7.5hp (3x400V-50Hz)

151kg

Total Stop

200bar

15l/min

1750

45 - 80°C *

7.5hp (3x400V-50Hz)

152kg

By-pass

150bar

21l/min

1750

45 - 65°C *

7.5hp (3x400V-50Hz)

151kg

Total Stop

150bar

21l/min

1750

45 - 65°C *

7.5hp (3x400V-50Hz)

152kg

ZX.2146

Stella 60Hz

ZX.2133-60-TS 1750 150/15 TS ZX.2134-60

1750 200/15

ZX.2134-60-TS 1750 200/15 TS ZX.2146-60

1750 150/21

ZX.2146-60-TS 1750 150/21 TS

ZX.1667-S

Filter kit 10" composed of: transparent 10" filter, cleanable cartridge 270mesh - 5mcrs, connection hose and filter tightening wrench

• • • • • •

ZX.2143

Low pressure detergent kit complete with: l.p. adjustable injector, detergent nozzle, 5L tank and chrome-plated steel tank rack

• • • • • •

ZX.2126

High pressure detergent kit complete with: stainless steel water tank with float valve and connecting hose, detergent flow regulator, 5L tank and chrome-plated steel tank rack

• • • • • • • • • •

• • • • •

ZX.2146 ZX.2146-TS

Description

ZX.2134 ZX.2134-TS

Code

ZX.2133 ZX.2133-TS

Optional

*Steam stage: 140°C

ZX.2146-60 ZX.2146-60-TS

ZX.2134-TS

ZX.2134-60 ZX.2134-60-TS

ZX.2134

ZX.2133-60 ZX.2133-60-TS

Stella 50Hz

ZX.2133-TS

• • • •

• • • •

• • • • •

• • • •

ZN.CC100B3P3P ZN.CC150B3P3P ZN.CC200B3P3P

H.p. hose R1 5/16" 10m, M22x1.5 F-F

CDR.7062

Hose connection, M22x1.5 M-M

ZX.1272-900 ZX.1273-900 ZX.1274-900 ZX.1282-900 ZX.1283-900 ZX.1285-900 ZX.KAC10F ZX.KAC10G ZX.KAC10V

CdR 80 lance, 900mm, with rotating nozzle flow rate 045

ZX.1675

Kit of lift brackets

• • • • • • • • •

ZX.0982-P

POM foam kit with 1L tank with extended length M quick coupling

• • • • • •

H.p. hose R1 5/16" 15m, M22x1.5 F-F H.p. hose R1 5/16" 20m, M22x1.5 F-F

CdR 80 lance, 900mm, with rotating nozzle flow rate 050 CdR 80 lance, 900mm, with rotating nozzle flow rate 070 CdR 80 lance, 900mm, with sandblast nozzle flow rate 045

CdR 80 lance, 900mm, with sandblast nozzle flow rate 050 CdR 80 lance, 900mm, with sandblast nozzle flow rate 075 Hose for sewer nozzles 1/4" 210bar 10m, inlet M long, SS nozzle with 3 bottom holes, flow rate 045 Hose for sewer nozzles 1/4" 210bar 10m, inlet M long, SS nozzle with 3 bottom holes, flow rate 055 Hose for sewer nozzles 1/4" 210bar 10m, inlet M long, SS nozzle with 3 bottom holes, flow rate 070

Technical features

• •

• •

• •

• •

• •

Data, tables and pictures are purely indicative. Any changes can be made by the manufacturer without prior notice.

Standard equipment

• Tubular frame set made of chromed steel treated with polyester

• Heater made of grey painted steel, galvanised steel inner jacket and stainless steel chimney

• H.p. hose 8m with screw quick couplings M22x1.5F-F long swivel

• Cover made of thermoformed polystyrene

• Burner with delayed ignition

• Professional pump 1450Rpm (1750Rpm on 60Hz vers.), crankshaft, brass head, 3 ceramic plungers

• Fuel tank 14L with level indicator

• Professional spray gun with female swivel ball quick coupling

• Electric motor 1450Rpm 50Hz (1750Rpm on 60Hz vers.), complete with electric box IP55 with ON/OFF circuit breaker switch, thermostatwith switch and 5m electric cable Copyright© Idrobase Group. All rights reserved.

• Fuel filter with drain valve • Coil double spiral type ø20, length 28.5m • Dimensions WxLxH: 570 x 790 x 860mm

• Lance 900mm with male quick coupling • 4 quick H.p. nozzles (0°-15°25°-40°) high resolution 3


Transformer

transformer

With Idrobase water inlet kit: 2-year warranty

Patented solution

MADE IN ITALY

>1450 >1750

transformer

Rpm 50Hz

Rpm 60Hz

Optional, With Idrobase inlet water kit: 2-year warranty

Professional h. p. washer Transformer enables a perfect wash, easily, safely and effortlessly. Transformer has been entirely designed, engineered, patented and manufactured from A to Z by Idrobase Group. It is ideal for companies that use the h.p. washer up to 8 hours a day.

VISIBLE PUMP

Professional: 50% less maintenance time

CONTROL PANEL

Safe: IP56 certified Simple: only one circuit breaker switch, no electronics

SIMPLE AND STURDY Attractive design, easy to use and sturdy structure

"COMFORT LINE" ACCESSORIES

When working helps well-being

CopyrightŠ Idrobase Group. All rights reserved.


Cold Water Pressure

Fl. rate

Rpm

Power

Wght

Transformer 50Hz

ZX.2657 ZX.2657-TS ZX.2661 ZX.2661-TS ZX.2663 ZX.2663-TS

150/15

By-pass

150bar

15l/min

1450

5.5hp (3x400V-50Hz)

73kg

150/15 TS

Total Stop

150bar

15l/min

1450

5.5hp (3x400V-50Hz)

74kg

150/21

By-pass

150bar

21l/min

1450

7.5hp (3x400V-50Hz)

87kg

150/21 TS

Total Stop

150bar

21l/min

1450

7.5hp (3x400V-50Hz)

88kg

200/15

By-pass

200bar

15l/min

1450

7.5hp (3x400V-50Hz)

87kg

200/15 TS

Total Stop

200bar

15l/min

1450

7.5hp (3x400V-50Hz)

88kg

ZX.2657-60 ZX.2657-60-TS ZX.2661-60 ZX.2661-60-TS ZX.2663-60 ZX.2663-60-TS

1750 150/15

By-pass

150bar

15l/min

1750

5.5hp (3x400V-60Hz)

73kg

1750 150/15 TS

Total Stop

150bar

15l/min

1750

5.5hp (3x400V-60Hz)

74kg

1750 150/21

By-pass

150bar

21l/min

1750

7.5hp (3x400V-50Hz)

87kg

1750 150/21 TS

Total Stop

150bar

21l/min

1750

7.5hp (3x400V-50Hz)

88kg

1750 200/15

By-pass

200bar

15l/min

1750

7.5hp (3x400V-50Hz)

87kg

1750 200/15 TS

Total Stop

200bar

15l/min

1750

7.5hp (3x400V-50Hz)

88kg

Optional

Code

Description

ZX.1681-S

Filter kit 10" composed of: transparent 10" filter, cleanable cartridge 270mesh - 5mcrs, connection hose and filter tightening wrench

ZN.CC100B3P3P

H.p. hose R1 5/16", 315bar, 10m, M22x1.5 F-F

ZX.2663 ZX.2663-60 ZX.2663-TS ZX.2133-60-TS

Version

ZX.2661 ZX.2661-TS ZX.2661-60 ZX.2661-60-TS

Model

ZX.2657 ZX.2657-TS ZX.2657-60 ZX.2657-60-TS

Code

Transformer 60Hz

Technical data

• • •

• • •

ZN.CC200B3P3P

H.p. hose R1 5/16", 315bar, 20m, M22x1.5 F-F

• • •

ZX.2151

Hose reel kit composed of: painted support, manual hose reel and connection hose (WITHOUT H.P. HOSE)

CDR.7062

Hose connection, M22x1.5 M-M

ZX.7117

CdR 80 lance, 1200mm with bend, inlet G1/4" M, outlet 1/4" NPT-F

ZX.0292

Set of quick nozzles, flow rate 050 with ball quick coupling G1/4" F

ZX.0293

Set of quick nozzles, flow rate 045 with ball quick coupling G1/4" F

• •

ZX.1496 ZX.1571-050 ZX.1571-045 ZX.1571-070 ZX.KAC10G ZX.KAC10F ZX.KAC10H ZX.0520-M ZX.0519-M ZX.0521-M

Set of quick nozzles, flow rate 070 with ball quick coupling G1/4" F

ZX.0996-P

POM foam kit with 1L tank with extended length M quick coupling + pair of swivel ball quick couplings

ZN.CC150B3P3P

H.p. hose R1 5/16", 315bar, 15m, M22x1.5 F-F

Rotating nozzle G1/4" M, flow rate 050 Rotating nozzle G1/4" M, flow rate 045

Rotating nozzle G1/4" M, flow rate 070 Hose for sewer nozzles 1/4" 210bar 10m, inlet M long, SS nozzle with 3 bottom holes, flow rate 045 Hose for sewer nozzles 1/4" 210bar 10m, inlet M long, SS nozzle with 3 bottom holes, flow rate 055 Hose for sewer nozzles 1/4" 210bar 10m, inlet M long, SS nozzle with 3 bottom holes, flow rate 065 Sandblasting head kit G1/4" M, flow rate 050 Sandblasting head kit G1/4" M, flow rate 045

• • •

• •

• •

Sandblasting head kit G1/4" M, flow rate 075

• •

Data, tables and pictures are purely indicative. Any changes can be made by the manufacturer without prior notice.

Technical features • Frame set made of chromed steel and protected by transparent paint • Thermoformed cover in polystyrene • Professional pump 1450Rpm (1750Rpm on 60Hz vers.), crankshaft, brass head, 3 ceramic plungers Copyright© Idrobase Group. All rights reserved.

Standard equipment • Electric motor 1450Rpm 50Hz (1750Rpm on 60Hz version), complete with ON/OFF circuit breaker switch, and 5m electric cable

• H.p. hose R1 5/16" 10m, screw quick couplings M22x1.5 F-F

• Dimensions WxLxH: 815 x 590 x 1042mm

• Lance 700mm

• Spray gun RED 50, inlet M22x1.5 M • H.p. nozzle 25° high resolution 5


Multiplo

With Idrobase water inlet kit: 2-year warranty

MADE IN ITALY

>1450 Rpm 50Hz

Inlet water up to maximum 85°C

Optional, With Idrobase inlet water kit: 2-year warranty

The modular system for car washes Thanks to Multiplo you can have a custom tailored professional pressure washing system. A module completed with different variants, to achieve professional and specific pressure washing. Ideal for professional washing systems: Multiplo is available in a number of models that can be supplied with water up to 85°C.

SYSTEM WITH AISI 304 STAINLESS STEEL COVER and galvanised frame

INDUSTRIAL PUMP

With patented seal system between head and guard that guarantees high performance and reliability

CONTROL PANEL

Complete with 24V controls, hour meter and master safety switch

USE WITH INLET WATER UP TO MAX 85°C

Copyright© Idrobase Group. All rights reserved.


Hot Water Technical data Code

Model

Version

Pressure

Fl. rate

Rpm

Power

Wght

ZX.1740-HW

1450 180/26 TS

Total Stop

180bar

26l/min

1450

12.5hp (3x400V-50Hz)

80.5kg

ZX.1741-HW

1450 140/33 TS

Total Stop

140bar

33l/min

1450

12.5hp (3x400V-50Hz)

98.5kg

ZX.1742-HW

1450 110/42 TS

Total Stop

110bar

42l/min

1450

12.5hp (3x400V-50Hz)

98.5kg

ZX.1741-HW ZX.1742-HW

Optional

ZX.1740-HW

Use with inlet water up to max 85°C.

Code

Description

ZX.0302-R

Inlet water filter kit 10" complete with pressure stabiliser: 4 pressure gauges, wall bracket, 2000mm connection hose and 2 filter cartridges (1-3mcrs and 5mcrs), shut-off valve and filter tightening wrench

ZX.0303-R

Inlet water filter kit 20" complete with pressure stabiliser: 4 pressure gauges, wall bracket, 2000mm connection hose and 2 filter cartridges (1-3mcrs and 5mcrs), shut-off valve and filter tightening wrench

ZX.1678

Hose R1 1/2" 210bar M22x1.5 F-G1/2" F for connecting the system to the line

ZX.1679

Accumulator kit 0.35L, M22x1.5 M-F to reduce water hammering

Data, tables and pictures are purely indicative. Any changes can be made by the manufacturer without prior notice.

Technical features • Frame set made of galvanised steel with cover in AISI 304 stainless steel

• Glycerine-filled pressure gauge made of AISI 304 stainless steel

• H.p. pump with camshaft, 3 ceramic plungers, bronze alloy connecting rods and dual gasket pack in special mix

• Brass water inlet filter "Y" shaped • Control panel in 24V complete with: hour meter as standard, master safety switch and ON/OFF start switch and 5m electric cable

• Electric motor 1450Rpm , 3x400V-50Hz • Brass by-pass valve

Copyright© Idrobase Group. All rights reserved.

• Dimensions WxLxH: 45 x 78 x 50mm

7


Singolo

With Idrobase water inlet kit: 2-year warranty

MADE IN ITALY

>1450 Rpm 50Hz

Optional, With Idrobase inlet water kit: 2-year warranty

The perfect solution for car washes Singolo enables you to optimise the washing system. It offers the possibility to have a perfect wash, simply, quickly and economically. Singolo is the answer for companies who want higher quality in the pressure washing process, with reduced costs and time taken. It is the ideal solution for the car wash.

Technical data Code

Model

Version

Pressure

Fl. rate

Rpm

Power

Wght

ZX.2314

FREDDO 1450 150/15

By-pass

150bar

15l/min

1450

5.5hp (3x400V-50Hz)

54kg

ZX.2314-TS

FREDDO 1450 150/15 TS

Total Stop

150bar

15l/min

1450

5.5hp (3x400V-50Hz)

57kg

ZX.2315

FREDDO 1450 150/21

By-pass

150bar

21l/min

1450

7.5hp (3x400V-50Hz)

67.5kg

ZX.2315-TS

FREDDO 1450 150/21 TS

Total Stop

150bar

21l/min

1450

7.5hp (3x400V-50Hz)

70kg

60Hz versions are available. Ask for technical features.

Optional

Data, tables and pictures are purely indicative. Any changes can be made by the manufacturer without prior notice.

Code

Description

ZX.0302-R

Inlet water filter kit 10" complete with pressure stabiliser: 4 pressure gauges, wall bracket, 2000mm connection hose and 2 filter cartridges (1-3mcrs and 5mcrs), shut-off valve and filter tightening wrench

Technical features • Cover AISI 304 stainless steel • Professional pump 1450Rpm, crankshaft, brass head, 3 ceramic plungers • Pressure accumulator to attenuate water hammering • Brass water inlet filter "Y" shaped • Electric motor, 50Hz, complete with ON/OFF circuit breaker switch

Standard equipment • Electric panel, equipped with ON/OFF switch and hour meter. 3m electric cable for connection to the module and 5m for connection to the electric power supply • Dimensions WxLxH: 530 x 450 x 350mm

• H.p. hose 10m with swivel screw quick coupling • Professional spray gun with female swivel ball quick coupling • Lance 900mm with male quick coupling • H.p. nozzle 25° angle, high resolution Copyright© Idrobase Group. All rights reserved.


Cold Water TRI.0009 H.p. hose in AISI 304 stainless steel ø14x2mm, in 3m sections

RR.TN9214SR38 Ogive start fitting made of galvanised steel, G3/8" M-ø14mm

ZX.0514-C3 Stainless steel anti-vibration bracket for pipe ø14, complete with stainless steel screws

ZN.CC007X1Z8P H.p. connection hose, between module and line, R1 5/16", 700mm G3/8" F-F 90°

RR.TN9214SR38 Ogive start fitting made of galvanised steel G3/8" M-ø14mm EFF.2321N203 H.p. ball valve made of brass, *Viton® O-Ring, G3/8" F-F, 210bar

CDR.7012 Female ball quick coupling made of AISI 416 stainless steel, G3/8" F, 250bar

S.LI0110SA Pressure accumulator 0.1L, 210bar, inlet G3/8" F RR.TN10014S Ogive "T" fitting made of galvanised steel, ø14mm TRI.0009 H.p. hose in AISI 304 stainless steel ø14x2mm, in 3m sections

ZX.0514-C3 Stainless steel anti-vibration bracket for pipe ø14, complete with AISI 304 stainless steel screws

CDR.7011 Male ball quick coupling, made of AISI 416 stainless steel, G3/8" F, 250bar

CDR.1296 Wall support for hose, made of AISI 304 stainless steel

CDR.1321 AISI 304 stainless steel wall support for lances: foam lance + 2 lances with various attachments

CDR.7017 Nipple G3/8" M M22x1.5 M

ZN.CC100B8Z3P H.p. hose R1 5/16", 10m, 315bar, M22x1.5 F-F swivel ZN.CC200B8Z3P H.p. hose R1 5/16", 20m, 315bar, M22x1.5 F-F swivel

ZX.1413 Spray gun RED 50, inlet M22x1.5 M, female swivel ball outlet

GRP.0027 Electric panel cover made of AISI 304 stainless steel

ZX.1162 CdR 80 lance 500mm, inlet extended quick male, outlet 1/4" NPT-F

ZX.1164 CdR 80 lance, 900mm, inlet male extended, outlet 1/4" NPT-F

Installation example high pressure line complete with: fittings, anti-vibration brackets, h.p. ball valves and AISI 304 stainless steel pipe ø14mm Copyright© Idrobase Group. All rights reserved.

*VITON® is a registered trademark of Dupont

9


Car Wash

Vaporator

The professional steam generator that enables you to wash and sanitise in depth both the interior and exterior of the vehicle. Particularly suited for car washes and interiors cleaning for various means of transport such as cars, airplanes, boats. In regard to safety, Vaporator is equipped with: safety valve certified TÜV, thermostat, photocell for flame detection, pressure switch and filtering system. Diesel fired boiler. MADE IN ITALY

Accessories included Hose 10m with scald guard

Model

IB.2100

Vaporator

Pressure

9bar

Gun with PTFE nozzle ®

Dry-wet steam Outlets Max. steam Power capacity temperature

33-42kg/h

no. 1

180°C

400W (1x230V-50/60Hz)

Water tank

Fuel tank

Warm-up time

27L

20L

3 mins.

Weight Dimensions WxLxH

120kg

700x106x102mm

Aladino

Professional automatic floor mat washer that cleans the mat thoroughly in just 20 seconds. Allows immediate use of the mat after cleaning. Complete with automatic safety stop, signalling device for lack of foam during washing, and drain pipe. AISI 304 stainless steel body.

max width 600mm

Model

ZX.7048

Aladino

Power

300W (1x230V-50Hz)

Weight

80kg

Dimensions WxLxH

940 x 500 x 110mm

Copyright© Idrobase Group. All rights reserved.


Car Wash Washing station Assemble a personalised, modular washing station: our Auto Bella Car Wash system makes it possible to create different solutions according to the washing needs and the context where the system is located.

Rotating boom

H.p. hose for rotating booms

On page 12

On page 13

CDR.1671 CDR.1321

AISI 304 stainless steel lance holder suitable for lances with AB.0004, CDR.0372, CDR.7011 On page 16

Accessory holder AISI 304 SS

Sprayers

On page 31

Foam Lances On page 18

CDR.1676

Foam lance holder AISI 304 SS

Guns

On page 14

Sprayers

On page 31

Lance holder On page 12

Lances

On page 15

CopyrightŠ Idrobase Group. All rights reserved.

11


Car Wash Rotating booms and accessories

MADE IN ITALY

Flexible rotating "Z" ceiling boom made of stainless steel

360°

Length

Inlet

Outlet

Max pressure

200bar

Code

ZX.1700

1550mm

G1/4" F

G1/4" M swivel

Max flow rate

40l/min

ZX.1700-175

1750mm

G1/4" F

G1/4" M swivel

Max temperature

90°C

ZX.1700-200

2000mm

G1/4" F

G1/4" M swivel

Length

Inlet

Outlet

Flexible rotating "Z" wall boom made of stainless steel

180°

Code Max pressure

200bar

ZX.1702

1550mm

G1/4" F

G1/4" M swivel

Max flow rate

40l/min

ZX.1702-175

1750mm

G1/4" F

G1/4" M swivel

Max temperature

90°C

ZX.1702-200

2000mm

G1/4" F

G1/4" M swivel

ZX.1701

CDR.1436

CDR.1436-P

Wall support for rotating boom, made of painted galvanised steel

Lance holder floor stand, made of stainless steel 700mm

Lance holder wall mount, made of stainless steel 700mm

Swivel couplings

a

b

Code

Inlet

Outlet

Version

a

CDR.1331

G1/4" F

G1/4" M

straight

a

CDR.1332

G 3/8" F

G 3/8" M

straight

b

CDR.1328

G1/4" M

G1/4" F

90°

b

CDR.1329

G 3/8" M

G 3/8" F

90°

b

CDR.1330

G1/4" M

G 3/8" F

90°

Straight and 90°swivel couplings, made of stainless steel, with stainless steel ball bearings lubricated with water-resistant grease to reduce friction, 250bar, 45l/min, 160°C

Copyright© Idrobase Group. All rights reserved.


Car Wash H.p. hoses for full- & self-service car wash

blue

Code

MADE IN ITALY

Length

ZB.SN10X

100m

only hose

250bar, R7 5/16" - DN8 - BLUE high pressure hose Ideal for producing h.p. hoses to be used in full-service and self-service car washes. Anti-abrasion and stain resistant covering. Resistant to atmospheric and chemical agents. Highly resistant double synthetic braid and interior made of advanced thermoplastic material. Hose

Braids

5/16"

blue

2

Code

G 3/8" M

Ø Inside

8mm

Length

Ø Outside

Working pressure

Burst pressure

14,3mm

250bar

900bar

blue

-40°C +90°C

Code

Colour

blue

Length

ZB.SN035D2A1X 3,5m

ZB.SN035D1Z1Z

ZB.SN040D2A1X 4m

ZB.SN040D1Z1Z 4m

ZB.SN045D2A1X 4,5m

ZB.SN045D1Z1Z 4,5m

3,5m

G 3/8" F

ZB.SN050D2A1X 5m

ZB.SN050D1Z1Z

5m

ZB.SN060D2A1X 6m

ZB.SN060D1Z1Z

6m

ZB.SN070D2A1X 7m

ZB.SN070D1Z1Z

7m

G1/4" F

G 3/8" F

w/bend restr.

Fittings

Temperature

w/bend restr.

Code

Description

Fittings

Code

Description

CDR.1C

Blue bend res.

CDR.1Z

Crimp fitting G3/8" F

CDR.10W

Crimp bushing

CDR.2A

Crimp fitting G3/8" M

CDR.1X

Crimp fitting G1/4" F

ZX.3P

Crimp fitting M22x1,5 F ø14 BLACK ring nut

Copyright© Idrobase Group. All rights reserved.

13


Guns CdR "Comfort Line"

MADE IN ITALY

RED 25 spray gun, outlet female swivel ball type KW

b

Max pressure

220bar

Max flow rate

25l/min

Max temperature

150°C

Code

a

c

Features suitable for continuous use: 180bar, 15l/min, 90°C

Inlet

Outlet

a

ZX.1400

G3/8" F

F ball KW type

b

ZX.1401

G3/8" F swivel

F ball KW type

c

ZX.1402

G3/8" M

F ball KW type

d

ZX.1403

M22x1,5 M

F ball KW type

d

ZX.0339 Service kit for RED25 spray gun

RED 50 spray gun, outlet female swivel ball type KW

c

Max pressure

220bar

Max flow rate

40l/min

Max temperature

160°C

Code

a

b

d

Features suitable for continuous use: 200bar, 21l/min, 90°C

Inlet

Outlet

a

ZX.1410

G3/8" F

F ball KW type

b

ZX.1411

G3/8" F swivel

F ball KW type

c

ZX.1412

G3/8" M

F ball KW type

d

ZX.1413

M22x1,5 M

F ball KW type

CDR.0955 Service kit for RED50 spray gun

CDR.0001

ZX.1243

Swivel ball quick coupling F KW type, inlet G1/4" M

Set of Dolly O-Rings, for CDR.0001

quantity 9x1

AB.0004 Quick coupling, M KW type, inlet G1/4" F

quantity 1x50

CDR.7683

CDR.7681

CDR.1423

ECO spray gun, inlet M 22x1,5 M, outlet G1/4" F, 180bar, 15l/min, 40°C

ECO spray gun, inlet G3/8" F, outlet G1/4" F, 180bar, 15l/min, 40°C

Aura weep gun, inlet G3/8" F, outlet G1/4" F, 210bar, 25l/min, 150°C

Copyright© Idrobase Group. All rights reserved.


Lances Accessories

CdR 80 lance, moulded handle, with bend - outlet 1/4" NPT-F

Code

Length

Inlet

Outlet

ZX.1162

500mm

M coupling KW type

1/4" NPT-F

40l/min

ZX.1163

700mm

M coupling KW type

1/4" NPT-F

150°C

ZX.1164

900mm

M coupling KW type

1/4" NPT-F

ZX.1165

1200mm

M coupling KW type

1/4" NPT-F

ZX.1166

1500mm

M coupling KW type

1/4" NPT-F

ZX.1167

1700mm

M coupling KW type

1/4" NPT-F

Max pressure

220bar

Max flow rate Max temperature

Made of chromed steel

CdR 80 lance, moulded handle, with bend - outlet M18x1,5 M + O-Ring

Length

Inlet

Outlet

Max pressure

220bar

Code

ZX.1176

500mm

M coupling KW type

M18x1,5 M

Max flow rate

40l/min

ZX.1177

700mm

M coupling KW type

M18x1,5 M

Max temperature

150°C

ZX.1178

900mm

M coupling KW type

M18x1,5 M

ZX.1179

1200mm

M coupling KW type

M18x1,5 M

ZX.1180

1500mm

M coupling KW type

M18x1,5 M

ZX.1181

1700mm

M coupling KW type

M18x1,5 M

Length

Inlet

Outlet

Made of chromed steel

CdR 80 lance, moulded handle, straight - outlet 1/4" NPT-F

Code Max pressure

280bar

ZX.7127

700mm

G1/4" M

1/4" NPT-F

Max flow rate

40l/min

ZX.7128

900mm

G1/4" M

1/4" NPT-F

Max temperature

150°C

ZX.7129

1200mm

G1/4" M

1/4" NPT-F

Length

Inlet

Outlet

700mm

G1/4" M

1/4" NPT-F

"Sword" lance made of stainless steel for car wash - outlet 1/4" NPT-F

Code Max pressure

250bar

Max flow rate

40l/min

Max temperature

150°C

Copyright© Idrobase Group. All rights reserved.

CDR.1430

15


Car Wash Accessories ZX.1705-SS Stainless steel nozzle holder, 1/4"NPT-F, with M connection type KW

MADE IN ITALY

ZX.1705-QK Quick ball nozzle holder, with M connection KW type

ZX.7113

ZX.7140

Nozzle holder with black guard. Made of galvanised steel,inlet G1/4" F, outlet 1/4" NPT-F

Nozzle holder with blue guard. Made of stainless steel, inlet G1/4" F, outlet 1/4" NPT-F

ZX.7019

CDR.7023

CDR.7024

ZX.0154

Brass adapter for lance fitting Kärcher, inlet M 18x1,5 F, outlet G1/4" M. Ideal to fit nozzles with inlet G1/4" F on lances fitting Kärcher with connection M 18x1,5 M

Nozzle tip retainer fitting Kärcher, M 18x1,5 F

Brass nozzle holder fitting Kärcher, G1/4" F - M 18x1,5 M

Set of O-Rings, for brass nozzle holder (code CDR.7024)

quantity 1x100

CDR.1321

CDR.1296

Wall mount lance holder, made of AISI 304 st. steel

Wall mount hose holder, made of AISI 304 stainless steel

Car wash brushes

Code

Bristle length

CDR.1432

CDR.1435

CDR.1433

77mm

Foam injector ø2,5mm for car wash brushes, made of stainless steel, inlet G1/4" F, outlet G1/4" M

Brush holders for car wash, made of stainless steel

CDR.1434

97mm

600 Car wash brush, black horsehair, G1/4" F, 5bar, 60°C

150

352mm

Copyright© Idrobase Group. All rights reserved.


Nozzles H.p. nozzles, NPT-M 1/4" NPT-M

Code

H.p. nozzle 1/4" NPT-M, made of AISI 416 stainless steel

C.MEG0003 C.MEG00035 C.MEG0004 C.MEG00045 C.MEG0005 C.MEG00055 C.MEG0006 C.MEG0007 C.MEG0008 C.MEG1503 C.MEG15035 C.MEG1504 C.MEG15045 C.MEG1505 C.MEG15055 C.MEG1506 C.MEG1507

Angle

Flow rate

030

035

040

045

050

055

060

070

080

15°

030

15°

035

15°

040

15°

045

15°

050

15°

055

15°

060

15°

070

Angle

Flow rate

030

035

040

045

050

Code

C.MEG1508 C.MEG2503 C.MEG25035 C.MEG2504 C.MEG25045 C.MEG2505 C.MEG25055 C.MEG2506 C.MEG2507 C.MEG2508 C.MEG4003 C.MEG40035 C.MEG4004 C.MEG40045 C.MEG4005 C.MEG40055 C.MEG4006

Angle

Flow rate

15°

080

25°

030

25°

035

25°

040

25°

045

25°

050

25°

055

25°

060

25°

070

25°

080

40°

030

40°

035

40°

040

40°

045

40°

050

40°

055

40°

060

Angle

Flow rate

H.p. tip nozzles H.p. tip nozzle fitting Kärcher

Code

DT.VHD10003 DT.VHD100035 DT.VHD10004 DT.VHD100045 DT.VHD10005 DT.VHD100055 DT.VHD10006 DT.VHD10007 DT.VHD10008 DT.FUH11503 DT.FUH115035 DT.FUH11504 DT.FUH115045 DT.FUH11505

055

060

070

080

15°

030

15°

035

15°

040

15°

045

15°

050

Code

DT.FUH15055 DT.FUH1506 DT.FUH12503 DT.FUH125035 DT.FUH12504 DT.FUH125045 DT.FUH12505 DT.FUH125055 DT.FUH12506 DT.FUH12507 DT.FUH12508 DT.FUH14003 DT.FUH140035

15°

055

15°

060

25°

030

25°

035

25°

040

25°

045

25°

050

25°

055

25°

060

25°

070

25°

080

40°

030

40°

035

H.p. nozzles, "Quick" H.p quick nozzle: 0° RED

H.p quick nozzle: 25° GREEN

Code

Angle

Flow rate

ES.NOQS-0002.5 0°

025

ES.NOQS-0003 0°

H.p quick nozzle: 15° YELLOW

Code

Angle

Flow rate

ES.NOQS-1502.5 15°

025

030

ES.NOQS-1503 15°

030

ES.NOQS-0003.5 0°

035

ES.NOQS-1503.5 15°

035

ES.NOQS-0004 0°

040

ES.NOQS-1504 15°

040

ES.NOQS-0004.5 0°

045

ES.NOQS-1504.5 15°

045

ES.NOQS-0005 0°

050

ES.NOQS-1505 15°

050

ES.NOQS-0005.5 0°

055

ES.NOQS-1505.5 15°

055

ES.NOQS-0006 0°

060

ES.NOQS-1506 15°

060

ES.NOQS-0007 0°

070

ES.NOQS-1507 15°

070

Code

Angle

Flow rate

H.p quick nozzle: 40° WHITE

Code

Angle

Flow rate

ES.NOQS-2502.5 25°

025

ES.NOQS-4002.5 40°

025

ES.NOQS-2503 25°

030

ES.NOQS-4003 40°

030

ES.NOQS-2503.5 25°

035

ES.NOQS-4003.5 40°

035

ES.NOQS-2504 25°

040

ES.NOQS-4004 40°

040

ES.NOQS-2504.5 25°

045

ES.NOQS-4004.5 40°

045

ES.NOQS-2505 25°

050

ES.NOQS-4005 40°

050

ES.NOQS-2505.5 25°

055

ES.NOQS-4005.5 40°

055

ES.NOQS-2506 25°

060

ES.NOQS-4006 40°

060

ES.NOQS-2507 25°

070

ES.NOQS-4007 40°

070

Copyright© Idrobase Group. All rights reserved.

17


Foam lances CdR foam lance with POM delivery

1L tank - inlet G1/4" F

7

1

2

6 8

Description

CDR.0873-P

CdR foam lance, with 1L tank capacity, inlet G1/4" F

Specifications

1. Micrometric detergent regulator screw with EPDM 70 seal and AISI 303 stainless steel bolt 2. Detergent dispenser made of shock-resistant plastic, AISI 304 stainless steel "duck-bill" foam diffuser, fan spray from 0° to 40° 3. "Lozenge" for producing the foam, made of pressed AISI 304 stainless steel wires 4. 1L polyamide detergent tank with non-deformable increased thread 5. Brass body 6. Nozzle made of AISI 304 SS 7. POM injector housing 8. Tank connector made of POM, which doesn't damage the tank thread

5

3

4

Code

Tech. features • • • • • •

Inlet: G1/4" F Rated pressure: 160bar Working pressure: 180bar Мax flow rate: 20l/min Temperature: 60°C Nozzle: ø1.25mm

Why choose POM?

Differently from brass, POM: • is flexible and resistant: it doesn’t break in the event of accidental falls • doesn’t absorb moisture: in very cold environments moisture can turn into ice, making the plastic very fragile • has a homogeneous and uniform surface: better detergent flow • has a low porosity: it can’t be damaged by contact with chemical products • doesn’t oxidize: oxidised areas may clog the filter over time • doesn’t trigger chemical reactions: improves cleaning and the foaming effect

Brass body > Test result at 150 hours of work

Foam lance with brass body,

POM delivery with M connector type KW + pair of swivel ball quick connections type KW

b

c a

MADE IN ITALY

d

e

ZX.0996-P

b+d+e

ZX.0996-PR

c+d+e

a

CDR.1508

RED50 spray gun, inlet M22x1,5 M, outlet G1/4" F

b

CDR.0001

F swivel ball quick coupling KW type, inlet G1/4" M

c

CDR.7658

REVERSE F swivel ball quick coupling KW type, inlet G1/4" M

d

ZX.0982-P

CdR foam lance, with 1L tank, M inlet connection, KW type

e

AB.0004

M connector type KW, inlet G1/4" F Copyright© Idrobase Group. All rights reserved.


CdR foam kit POM delivery Fitting Kärcher ZX.0993-P Foam lance with brass body, POM delivery with AISI 416 stainless steel M quick + stainless steel and brass ball adapters

a

b

a ZX.0841 + b ZX.0843-P +c ZX.0842

c M galvanised steel ZX.0907-P Foam lance with brass body, POM delivery with galvanised steel M quick coupling CDR.7009

Fitting Kärcher ZX.0994-P Foam lance with brass body, POM delivery with M connector KW type + F ball quick coupling KW type - M22x1,5 F + M connector KW type - M22x1,5 M

a

b

a ZX.0980-P + b ZX.0982-P +c ZX.0981

c M22 Long ZX.0988-L-P Foam lance with brass body, POM delivery with screw quick coupling M22x1,5 M long CDR.7379 suitable for spray guns with extension, also with double O-ring

Fitting Kärcher ZX.1368-P Foam lance with brass body, POM delivery with M22x1,5 F screw quick coupling CDR.7108-S

Copyright© Idrobase Group. All rights reserved.

19


Foam lances CdR foam lance made of brass

With 1L tank - inlet G1/4" F 7

1

2

6

Code

Description

CDR.0873-Q

CdR foam lance, with 1L tank capacity, inlet G1/4" F

Specifications

8

1. Micrometric detergent regulator screw with EPDM 70 seal and AISI 303 stainless steel bolt 2. Detergent dispenser made of shock-resistant plastic, AISI 304 stainless steel "duck-bill" foam diffuser, fan spray from 0° to 40° 3. "Lozenge" for producing the foam, made of pressed AISI 304 stainless steel wires 4. 1L polyamide tank, with non-deformable increased thread 5. Brass body 6. Nozzle made of AISI 304 SS 7. Brass injector housing 8. Brass tank connector

5

3

4

Tech. features • • • • • •

Inlet: G1/4" F Rated pressure: 160bar Working pressure: 180bar Мax flow rate: 20l/min Temperature: 60°C Nozzle: ø1.25mm

Brass foam lance,

with M connector type KW + pair of swivel ball quick couplings KW type

a

b

d

c

e

MADE IN ITALY

ZX.0996-Q

b+d+e

ZX.0996-R-Q

c+d+e

a

CDR.1508

RED50 spray gun, inlet M22x1,5 M, outlet G1/4" F

b

CDR.0001

F swivel ball quick coupling KW type, inlet G1/4" M

c

CDR.7658

REVERSE F swivel ball quick coupling KW type, inlet G1/4" M

d

ZX.0982-Q

CdR foam lance, with 1L tank, M inlet connection, KW type

e

AB.0004

M quick coupling KW type, inlet G1/4" F

M SS ZX.0843-Q Brass foam lance, with AISI 416 stainless steel M quick coupling CDR.7011

Copyright© Idrobase Group. All rights reserved.


CdR foam kit made of brass Fitting Kärcher ZX.0993-Q Brass foam lance, with AISI 416 stainless steel M quick coupling + stainless steel ball adapters

a

b

a ZX.0841+b ZX.0843-Q +c ZX.0842

c M galvanised steel ZX.0907-Q Brass foam lance, with galvanised steel M quick coupling CDR.7009

Fitting Kärcher ZX.0994-Q Brass foam lance,

b with M connector KW type + a F

ball quick coupling KW type - M22x1,5 F+

a

b

c M connector KW type - M22x1,5 M a ZX.0980+b ZX.0982-P +c ZX.0981

c M22 Long ZX.0988-L-Q Brass foam lance, with screw quick coupling M22x1,5 M long CDR.7379 suitable for spray guns with extension, also with double O-rings

Fitting Kärcher ZX.1368-Q Brass foam lance, with screw quick coupling M22x1,5 F CDR.7108-S

Copyright© Idrobase Group. All rights reserved.

21


Foam lances CdR foam lance S.S. body

MADE IN ITALY

With 1L tank - inlet G1/4" F

Code

7

1

Description

CDR.0873-SS

6

2

8

CdR foam lance, AISI 304 stainless steel body, with 1L tank, inlet G1/4" F

Specifications

1. Micrometric detergent regulator screw with EPDM 70 seal and AISI 303 stainless steel bolt 2. Detergent dispenser made of shock-resistant plastic, AISI 304 stainless steel "duck-bill" foam diffuser, fan spray from 0° to 40° 3. "Lozenge" for producing the foam, made of pressed AISI 304 stainless steel wires 4. 1L polyamide tank, with non-deformable increased thread 5. AISI 304 stainless steel body 6. Nozzle made of AISI 304 SS 7. POM injector housing 8. Tank connector made of POM, which doesn't damage the tank thread

5 3

4

Tech. features • • • • • •

Inlet: G1/4" F Rated pressure: 160bar Working pressure: 180bar Мax flow rate: 20l/min Temperature: 60°C Nozzle: ø1.25mm

Foam lance SS body,

POM delivery with M connector type KW + pair of swivel ball quick connections type KW

e

b c a

a b c d e f

ZX.0996-SS ZX.0996-BSS ZX.0996-RSS CDR.1503-B CDR.0001-SS CDR.0001 CDR.7658 ZX.0982-SS AB.0004

f

d

b+e+f c+e+f d+e+f

BLUE25 spray gun, inlet M22x1,5 M, outlet G1/4" F AISI 303 stainless steel F swivel ball quick coupling KW type , inlet G1/4" M F swivel ball quick coupling KW type, inlet G1/4" M REVERSE F swivel ball quick coupling KW type, inlet G1/4" M CdR foam lance AISI 304 stainless steel body, with 1L tank, inlet M connector KW type M quick coupling KW type, inlet G1/4" F

ZX.0843-SS

ZX.0988-L-SS

ZX.1368-SS

Foam lance with AISI 304 stainless steel body, AISI 416 stainless steel M quick coupling CDR.7011

Foam lance with AISI 304 stainless steel body, with screw quick coupling M22x1,5 M long CDR.7379 suitable for spray guns with extension, also with double O-rings

Foam lance with AISI 304 stainless steel body, screw quick coupling M22x1,5 F CDR.7108-S

Copyright© Idrobase Group. All rights reserved.


Foam lances A-Kit Lavaggio

• A-Kit Lavaggio ECO Kit of accessories for companies that required infrequent washing. Stainless steel ball quick couplings, foam lance with POM delivery A-Kit Lavaggio PROFY Kit of accessories for cleaning professionals. Swivel ball quick couplings, foam lance with POM delivery A-Kit Lavaggio SS Kit of accessories for continuous use with aggressive detergents. Spray gun AISI 304 stainless steel swivel ball coupling, M connectors M KW type for lances, foam lance with AISI 304 stainless steel body. All the versions of A-Kit Lavaggio are supplied in the innovative display packaging

A-Kit Lavaggio ECO

b

a a b c

c

ZX.7233 ZX.7230 ZX.7231-25045 ZX.0843-P

a+b+c

ECO spray gun, inlet M22x1,5 M, AISI 304 stainless steel F outlet Lance 650mm stainless steel M quick inlet AISI 416, nozzle 25°, flow rate 045 Foam lance with brass body, POM delivery, stainless steel M quick inlet

A-Kit Lavaggio PROFY

b

a

c

MADE IN ITALY

a b c

ZX.7234 ZX.1403 ZD.25045-C65K ZX.0982-P

a+b+c

RED 25 spray gun, inlet M22x1,5 M, F swivel ball outlet KW type CdR 80 lance, 650mm M quick inlet KW type, nozzle 25°, flow rate 045 Foam lance with brass body, POM delivery, M quick inlet KW type

A-Kit Lavaggio inox

b

a MADE IN ITALY

a b c

ZX.7235 ZX.1403 ZD.25045-C65K ZX.0982-P

a+b+c

c

MADE IN ITALY

BLUE25 spray gun, inlet M22x1,5 M, outlet AISI 303 stainless steel F swivel ball outlet KW type CdR 80 stainless steel lance, 650mm M quick inlet KW type, nozzle 25°, flow rate 045 Foam lance with AISI 304 stainless steel body, POM delivery, M quick inlet KW type

Copyright© Idrobase Group. All rights reserved.

23


Car Wash H.p. foam kit for fixed high pressure washer systems

MADE IN ITALY

b c

Code

a

Description

a

CDR.1269

High pressure foam device

b

ZX.1410

RED50 spray gun, inlet G3/8" F, outlet F swivel ball KW type

c

ZX.1135

Foam lance 510mm, inlet M connection KW type

high pressure foam device 100÷200bar is a very a The compact foam dispenser operating at high pressure that in combination with the foam lance makes it possible to operate very economically with minimum detergent use. • Detergent suction system: Venturi • Water flow rate: max 21l/min • Maximum pressure: 200bar • Maximum temperature: 95°C • Area treated per minute: approx. 70 m² • Percentage of foam detergent suctioned: 0.1 to 10 % • Device dimensions: 150 x 125 x 50mm (WxHxL) • Device material: AISI 304 stainless steel • Venturi system material: AISI 316 stainless steel

Equipment

• Two stainless steel ball quick couplings • 1500mm suction hose with filter • SS dosage regulator

Technical features of h.p. hose to be used with high pressure foam device: • 5/16" - max 10m length • 3/8" - max 30m length

b RED50 spray gun for continuous use, ergonomic design. steel foam lance covered in shock-proof plastic and c Stainless equipped with a special device for foam production and fan spray nebulising nozzle. Complete with M connector M KW type.

Use

Ideal for all high pressure systems from 100÷200bar. The combination with the dosing unit allows for very economical operation with minimal detergent consumption

WARNING !!! Not suitable for use with aggressive chemicals or inflammable liquids

Copyright© Idrobase Group. All rights reserved.


club dei riparatori The winning solution to manufacture and repair all kinds of pressure washers

CopyrightŠ Idrobase Group. All rights reserved.

25


Double life is the 24L nebuliser for detergents with plastic-coated tank Club dei Riparatori presents a worldwide exclusive Double life, the 24 litre detergent nebuliser with a tank painted inside with epoxy plastic-coating, the real pride and joy of the line. The difference compared to a normal tank lies in the epoxy plastic-coating on the internal surface of the nebuliser tank. This means that the tank is isolated from the chemical product and is not affect by the chemical agents in the detergent, thus prevent oxidation and the formation of rust. What are the benefits? First of all the life of the tank, which is double that of a normal tank. The composition of the detergent does not undergo any alterations resulting from oxidation and/or rust. Especially recommended for professional use in car washes thanks to the product's guaranteed longevity.

CopyrightŠ Idrobase Group. All rights reserved.


Nebulisers: our advantages The 24 litre detergent nebuliser (Code: 8.2002S / 8.2004S / 8.2002-YS / 8.2004-YS) with tank painted inside with epoxy plastic-coating. The tank is isolated from the chemical product and is not affect by the chemical agents in the detergent.

Cap made of POM, detergent resistant

What are the advantages? • The life of the tank is double compared to a standard tank • The detergent does not undergo any change in its composition caused by oxidation and/or rust • The nozzle doesn't clog

Anti-overflow ring

AISI 304 stainless steel thread where the cap is screwed on

Safety valve in accordance with European Directive 97/23/CE Precision air pressure regulator (foam version) with protective galvanisation

Plastic-coated tank for 24 litre painted versions (COD: 8.2002S/8.2004S/8.2002YS/8.2004-YS)

Red indicator light for detergent level

Tank in accordance with European Directive 97/23/CE

Copyright© Idrobase Group. All rights reserved.

Dimensions designed for saving The sizing of our nebulizers has been specially designed to optimise the bulk, thus ensuring a considerable savings in transport

27


Nebulisers Spray and foam nebuliser

24L painted inside with epoxy plastic-coating Spray

Code

Model

Colour

8.2002S

Airspray 24-RS Double life

Red

8.2002-YS

Airspray 24-YS Double life

Yellow

Airspray 24 (8.2002S, 8.2002-YS) equipment:

Spray gun (internal parts *Viton® + SS), 600mm, SS lance with brass fan spray nozzle, pressure gauge, safety valve, ball valve, 10m Rilsan spiral hose with anti-twist connection. Max pressure, 8bar

Foam 8.2004S

Airfoam 24-RS Double life

Red

8.2004-YS

Airfoam 24-YS Double life

Yellow

Airfoam 24 (8.2004S, 8.2004-YS) equipment:

Spray gun (internal parts *Viton® + SS), 600mm, SS lance with 1 foam fan spray nozzle, pressure gauge, safety valve, manual release valve and air pressure regulator, air suction valve, detergent suction valve, ball valve, 10m nylon hose. Max pressure 8bar

50L in painted steel Spray

MADE IN ITALY

Code

Model

Colour

8.2003

Airspray 50-R

Red

8.2003-Y

Airspray 50-Y

Yellow

Airspray 50 (8.2003, 8.2003-Y) equipment:

Spray gun (internal parts *Viton® + SS), 900mm with brass fan spray nozzle, pressure gauge, safety valve, ball valve, 10m Rilsan spiral hose with anti-twist connection. Max pressure 8bar

Foam 8.2009

Airfoam 50-R

Red

8.2009-Y

Airfoam 50-Y

Yellow

Airfoam 50 (8.2009, 8.2009-Y) equipment: The CdR Airspray and Airfoam nebulisers are made of 2,5mm painted steel. Recommended for professional use WARNING!!! They are not suitable for use with aggressive chemical products, flammable liquids and/or detergents with pH other than 5

*VITON® is a registered trademark of Dupont

Spray gun (internal parts *Viton® + SS), 900mm, SS lance with 1 foam fan spray nozzle, pressure gauge, safety valve, manual release valve and air pressure regulator, air suction valve, detergent suction valve, ball valve, 10m nylon hose. Max pressure 8bar

Copyright© Idrobase Group. All rights reserved.


Nebulisers Air spray and air foam nebuliser

MADE IN ITALY

100L made of painted steel

Spray

Code

Model

Colour

8.2001

Airspray 100-R

Red

8.2001-Y

Airspray 100-Y

Yellow

Airspray 100 (8.2001, 8.2001-Y) equipment:

Spray gun (internal parts Viton® + SS), 600mm, lance with brass fan spray nozzle, pressure gauge, safety valve, ball valve, 10m Rilsan spiral hose with anti-twist connection. Max pressure 8bar

Foam 8.2010

Airfoam 100-R

Red

8.2010-Y

Airfoam 100-Y

Yellow

Airfoam 100 (8.2010, 8.2010-Y) equipment: The CdR Airspray and Airfoam nebulisers are made of 2,5mm painted steel. Recommended for professional use WARNING!!! They are not suitable for use with aggressive chemical products, flammable liquids and/or detergents with pH other than 5

Spray gun (internal parts Viton® + SS), 600mm, SS lance with 1 foam fan spray nozzle, pressure gauge, safety valve, manual release valve and air pressure regulator, air suction valve, detergent suction valve, ball valve, 10m nylon hose. Max pressure 8bar

200L made of painted steel Spray

Code

Model

Colour

8.2013

Airspray 200-R

Red

8.2013-Y

Airspray 200-Y

Yellow

Airspray 200 (8.2013, 8.2013-Y) equipment:

Spray gun (internal parts Viton® + SS), 600mm, lance with brass fan spray nozzle, pressure gauge, safety valve, ball valve, 10m Rilsan spiral hose with anti-twist connection. Max pressure 8bar

Foam 8.2014

Airfoam 200-R

Red

8.2014-Y

Airfoam 200-Y

Yellow

Airfoam 200 (8.2014, 8.2014-Y) equipment: The CdR Airspray and Airfoam nebulisers are made of 2,5mm painted steel. Recommended for professional use WARNING!!! They are not suitable for use with aggressive chemical products, flammable liquids and/or detergents with pH other than 5

Copyright© Idrobase Group. All rights reserved.

Spray gun (internal parts Viton® + SS), 600mm, SS lance with 1 foam fan spray nozzle, pressure gauge, safety valve, manual release valve and air pressure regulator, air suction valve, detergent suction valve, ball valve, 10m nylon hose. Max pressure 8bar

*VITON® is a registered trademark of Dupont

29


Nebulisers Air spray and air foam nebuliser 24L stainless steel

Spray

Code

Model

8.2007

Airspray SS 24

Airspray SS 24 equipment:

Spray gun (internal parts Viton® + SS AISI 316), 600mm SS lance with brass fan spray nozzle, pressure gauge, safety valve, ball valve, 10m Rilsan spiral hose with anti-twist connection. Max pressure 8bar

Foam 8.2006

Airfoam SS 24

Airfoam SS 24 equipment: The CdR Airspray SS and Airfoam SS nebulisers are made of AISI 304 stainless steel. Recommended for professional use WARNING!!! They are not suitable for use with aggressive chemical products, flammable liquids and/or detergents with pH other than 5

Spray gun (internal parts Viton® + INOX AISI 316), 600mm SS lance with 1 foam fan spray nozzle, pressure gauge, safety valve, manual release valve and air pressure regulator, air suction valve, detergent suction valve, ball valve, 10m nylon hose. Max pressure 8bar

50L in acciaio inox Spray

Code

Model

8.2008

Airspray SS 50

MADE IN ITALY

Airspray SS 50 equipment:

Spray gun (internal parts Viton® + SS AISI 316), 900mm SS lance with brass fan spray nozzle, pressure gauge, safety valve, ball valve, 10m Rilsan spiral hose with anti-twist connection. Max pressure 8bar

Foam 8.2005

Airfoam SS 50

Airfoam SS 50 equipment:

Spray gun (internal parts Viton® + INOX AISI 316), 900mm SS lance with 1 foam fan spray nozzle, pressure gauge, safety valve, manual The CdR Airspray SS and Airfoam SS are made of 2,5mm painted steel. Recommended release valve and air pressure regulator, air suction valve, detergent for professional use suction valve, ball valve, 10m nylon hose. Max pressure 8bar WARNING!!! They are not suitable for use with aggressive chemical products, flammable liquids and/or detergents with pH other than 5

*VITON® is a registered trademark of Dupont

Copyright© Idrobase Group. All rights reserved.


Car Wash Sprayers A-Spruzzo Extreme The A-Spruzzo Extreme sprayers are designed for most heavy-duty jobs. Ideal for use in car washes to clean alloy wheels, in factories and in body shops. The acidresistant lance and the seals made of *VITON®, together with a tank that is highly resistant to high pressures, all guarantee the long life of the equipment.

Adjustable swivel nozzle

High-efficiency pump for minimum effort Safety valve

Telescopic acidresistant lance 7001350mm

Seals made of *Viton®

Spray gun with internal filter

Code

CDR.1800-7P CDR.1800-9P CDR.1800-12P

Capacity

Height

Diameter

Pressure

7L

470mm

220mm

4bar

9L

570mm

220mm

4bar

12L

600mm

220mm

4bar

Spare parts for A-Spruzzo Extreme 7-9-12L

a

b Code

c

Inlet

a

CDR.1800-SP

Repair kit made of Viton® for A-Spruzzo Extreme 7-9-12L

b

CDR.1803

Gun with telescopic lance, 700-1350mm

c

CDR.1800-H

1,7m hose for sprayer 7-9-12L

d

CDR.1800-N15

Complete nozzle, ø1,5mm, with seal made of *Viton®

e

CDR.1800-V

Safety valve

d

e

A-Spruzzo Strong

A-Spruzzo Active

A-Spruzzo Strong 1,5 and 2L are ideal to use in car washes for cleaning alloy wheels, in factories and body shops.

The A-Spruzzo Active 0,5 and 1L are ideal for nebulising detergents formulated for car interior finishes or products for protecting seals.

Safety valve

Ergonomic form

Adjustable swivel nozzle Translucent tank for easy visibility of the liquid level Code

CDR.1801-15P CDR.1801-20P

Capacity

Height

Diameter

Pressure

1,5L

310mm

130mm

4bar

2L

340mm

130mm

4bar

CDR.1801-SP

CDR.1800-N15

Repair kit for A-Spruzzo Strong 1,5 e 2L

Complete nozzle ø1,5mm, with seal made of *VITON®

Copyright© Idrobase Group. All rights reserved.

Nozzle adjustable by means of an excellent lowdrop system

Scale in litres and US gallons

Translucent tank for easy visibility of the liquid level

Code

CDR.1802-05P CDR.1802-10P

Capacity

Height

Diameter

0,5L

220mm

100mm

1L

275mm

115mm

*VITON® is a registered trademark of Dupont

31


Car Wash A-Vortice Acid-proof chromium plating

Plastic rotating pipe

Code

Description

ZX.7220-R

A-Vortice Classico Gun for cleaning car interiors, powered by compressed air. Steel body, pressure range 6-9,2bar; M quick coupling inlet; plastic rotating pipe, 1L tank capacity, detergent suction filter. Idromoq (10L)

Regulator that enables precise detergent dosing

Entry angled at 45° to facilitate use

CDR.1703-10

Detergent for deep cleaning all the fabric surfaces of the car such as seats, carpets, door panels and floor mats.

Code

Description

ZX.7222

A-Vortice Schiuma Foam gun for cleaning car exteriors and mechanical parts. Powered exclusively by compressed air, 6-9,2bar; M quick coupling. Supplied with two tips for jet with different angles. Working pressure 7bar, tank 1L.

Code

Description

ZX.7223

A-Vortice Metallo Black Gun for cleaning car interiors, powered by compressed air. Body made of steel, pressure range 6-9bar; M quick coupling inlet; metal rotating pipe, 1L tank capacity, detergent suction filter.

Acid-proof chromium plating

Regulator that enables precise detergent dosing Air inlet regulator

Aluminium rotating pipe

Regulator that enables precise detergent dosing

Aluminium rotating pipe

Regulator that enables precise detergent dosing

A-Vortice can not be sold in Japan and in the USA

Idromoq (10L)

Comfortable ergonomic grip

CDR.1703-10

Detergent for deep cleaning all the fabric surfaces of the car such as seats, carpets, door panels and floor mats.

Code

Description

ZX.7223-R

A-Vortice Metallo Gun for cleaning car interiors, powered by compressed air. Steel body, pressure range 6-9,2bar; M quick coupling inlet; metal rotating pipe, 1L tank capacity, detergent suction filter. Idromoq (10L)

CDR.1703-10

Detergent for deep cleaning all the fabric surfaces of the car such as seats, carpets, door panels and floor mats. CopyrightŠ Idrobase Group. All rights reserved.


Car Wash A-Vortice Classico - parts map 1 2

3 4

5

6

ZX.7221

ZX.7225

Service kit for A-Vortice Classico ZX.7220 old version

Service kit for other similar guns powered by compressed air

G1/4" M

G1/4" M

G1/4" M

G1/8" M

quantity 4x1

quantity 4x1

Spare parts list Code

Description

Quantity

1

CDR.7676

Lance extension

1

2

CDR.7678

Rotating pipe with fitting

2

CDR.7677

Inner pipe with connection G1/4" M-M

1

CDR.7677-W

Inner pipe with connection G1/4" M - G1/8" M

1

4

CDR.010017K

Ball valve

1

5

CDR.7684

Suction pipe with filter

1

6

CDR.7679

Tank 1L

1

3

Copyright© Idrobase Group. All rights reserved.

ZX.7221

ZX.7225

• • •

• • •

A-Vortice can not be sold in Japan and in the USA

33


Car Wash A-Vortice ARIA

A-Vortice ARIA TURBO

Entry angled to facilitate use

Detail of the air intake of the A-Vortice ARIA TURBO

Code

Description

ZX.7227

Gun for cleaning car interiors and mechanical parts. Used with compressed air at 3 to 7bar from a standard compressor. A-Vortice ARIA TURBO does not have the detergent bottle or the rotating pipe but is equipped with a Turbo extension. A-Vortice ARIA TURBO features a Venturi system that sucks fresh air from the outside, increasing the quantity of air blown by the gun.

A-Vortice ARIA ROTANTE

Entry angled to facilitate use Detail of the rotating pipe

Code

Description

ZX.7226

Gun for cleaning car interiors and mechanical parts. A-Vortice ARIA ROTANTE is used with compressed air from a standard compressor at 3 to 7bar; it is an A-Vortice Classico but without the detergent bottle and thus without the intake pipe; the cone is made of anodised aluminium with the classic rotating pipe inside.

A-Vortice can not be sold in Japan and in the USA

CopyrightŠ Idrobase Group. All rights reserved.


Car Wash A-Vortice ARIA PLUS

A-Vortice ARIA TURBO PLUS Gun cap for lubricating the internal components Detail of the air intake of the A-Vortice ARIA TURBO PLUS

Surface treatment that protects against corrosion and atmospheric agents

Entry angled to facilitate use

Code

Description

ZX.7229

Gun for cleaning car interiors and mechanical parts that are difficult to reach. Used with compressed air from 3 to 7bar from a standard compressor. A-Vortice ARIA TURBO PLUS does not have the detergent bottle or the rotating pipe, but it is equipped with a Turbo extension. A-Vortice ARIA TURBO PLUS features a Venturi system that sucks fresh air from the outside, increasing the volume of air inside the gun. Before going out, the air is channelled into a chamber in the form of a gun barrel that "rolls" it over, thus enabling the turbo air flow to maintain its compactness and pressure even at 20-30 centimetres from the outlet nozzle.

A-Vortice ARIA ROTANTE PLUS Gun cap for lubricating the internal components

Detail of the rotating pipe with rotation speed of 3000rpm

Surface treatment that protects against corrosion and atmospheric agents

Code

Description

ZX.7228

Gun for cleaning car interiors and mechanical parts. A-Vortice ARIA ROTANTE PLUS is used with compressed air from a standard compressor at 3 to 7bar. It is an A-Vortice Classico but without the detergent bottle and thus without the intake pipe; the cone is made of shockproof plastic, preventing any damage to the car body. The classic rotating pipe is situated inside the outlet cone. The characteristics of the A-Vortice ARIA ROTANTE PLUS enable thorough cleaning of the surfaces of the car that are the smallest and narrowest and thus difficult to clean.

CopyrightŠ Idrobase Group. All rights reserved.

A-Vortice can not be sold in Japan and in the USA

35


Car Wash Wet vacuums Eolo and spare parts

Eolo

MADE IN ITALY

Professional vacuum cleaner featuring an exclusive technology that enables it to be used simultaneously with a pneumatic tool. Used in combination with A-Vortice Aspira, it allows you to remove dirt embedded inside the vehicles in just a few minutes Accessories included

Hose 4,5m

USE IN COMBINATION

QUICK COUPLINGS

with air compressor

Model

IB.2027

in inlet and outlet compressed air

n° Motors

1 - two-stage high speed by-pass

Eolo

Waterlift

2400mm

DOUBLE FILTER

FLEXIBLE HOSE

in polyester and nylon

Air intake

215m³/h

Drum capacity

36L

With integrated compressed air hose for maximum ease of handling

Max power

Dimensions WxLxH

1,4kW (1x230V-50/60Hz)

400 x 400 x 750mm

Eolo spare parts 250

340

CDR.1648

Polyester filter, ø340mm

CDR.1737

Flexible hose, 4,5mm, ø29/36mm, with integrated air tube

CDR.1649

Nylon filter, ø340mm

CDR.1003

Flat lance, ø36mm, 210mm

CDR.1736

Sponge filter for liquids

CDR.1740

Wet vacuum motor

200mm

A-Vortice can not be sold in Japan and in the USA

Copyright© Idrobase Group. All rights reserved.


Car Wash A-Vortice Aspira

A-Vortice ASPIRA

An innovative accessory for cleaning the seats, floor mats, and carpet of the car. With just one pass, A-Vortice ASPIRA performs two actions simultaneously: with the compressed air blown by the rotating cone, it brings the dirt to the surface and eliminates it through the suction nozzle The Vortex of cleaning

Thanks to the vortex of compressed air, the dirt particles are separated from the surface where they were embedded

Two in one

Combined action compressed air suction motor

A magnet for dirt

The sucking action of Eolo attracts the dirt that is deeply embedded

of and

ZX.7232 A-Vortice ASPIRA, accessory for cleaning car interiors, powered by compressed air 6-7bar. Air consumption 6,3bar: 270l/min. Accessory composed of: 2 adapters 26 to 36mm (a); body with rotating cone (b); 2 nozzles (c); pipe 3m ø6x4mm; 5 plastic clips (e)

c

a

a

b

c

d

e

Operation of Eolo with A-Vortice ASPIRA

Connect A-Vortice ASPIRA to the flexible hose of Eolo and hook up the compressed air to the ball quick coupling CopyrightŠ Idrobase Group. All rights reserved.

Select automatic operation on the Eolo wet vacuum cleaner

Start up the compressed air and the suction by rotating the lever of the A-Vortice ASPIRA

Proceed with the professional interior cleaning

A-Vortice can not be sold in Japan and in the USA

37


Car Wash Wet vacuum

MADE IN ITALY

Pulito 3 Pulito 4 Pulito 2 Pulito 5 Pulito 6 Pulito 7

Model

n° Motors

Waterlift

Air intake

Tank Accessories ø Max power capacity

Dimensions WxLxH

IB.2015

Pulito 2

1 - single-stage high speed by-pass

2230mm

237m³/h

18L

36mm

1,5kW (1x230V-50/60Hz)

400 x 400 x 660mm

IB.2017

Pulito 4

1 - single-stage high speed by-pass

2230mm

237m³/h

26L

36mm

1,5kW (1x230V-50/60Hz)

400 x 400 x 740mm

IB.2016

Pulito 3

1 - single-stage high speed by-pass

2230mm

237m³/h

62L

38mm

1,5kW (1x230V-50/60Hz)

520 x 520 x 1000mm

IB.2018

Pulito 5

2 - single-stage high speed by-pass

2230mm

475m³/h

62L

38mm

2,8kW (1x230V-50/60Hz)

580 x 720 x 980mm

IB.2019

Pulito 6

3 - single-stage high speed by-pass

2230mm

710m³/h

62L

38mm

3,5kW (1x230V-50/60Hz)

580 x 720 x 980mm

IB.2020

Pulito 7

2 - two-stage high speed by-pass

3115mm

370m³/h

62L

38mm

3,5kW (1x230V-50/60Hz)

580 x 740 x 970mm

The data on waterlift and air flow refer to single motors

Accessories ø36mm included

Accessories ø38mm included

Hose 2m Hose 2,5m

Copyright© Idrobase Group. All rights reserved.


Car Wash Wet vacuum spare parts

MADE IN ITALY

Pulito 2

Pulito 4

Pulito 3

Pulito 5

IB.2015

IB.2017

IB.2016

Complete flexible hose as standard equipment

ZX.1007-C

ZX.1007-C

ZX.1004-SW ZX.1004-SW ZX.1004-SW ZX.1004-SW (2,5m)

(2,5m)

(2,5m)

(2,5m)

Flexible hose 30m coil without tool adapters

CDR.1024

CDR.1024

CDR.1025

CDR.1025

CDR.1025

CDR.1025

Rigid threaded tool adapter for flexible hose, with neck on tank side

CDR.1009

CDR.1009

CDR.1040

CDR.1040

CDR.1040

CDR.1040

CDR.1020

CDR.1020

CDR.1020

CDR.1020

Rigid threaded tool adapter, for flexible hose, with swivel connection inlet on accessory side

-

(2m)

-

IB.2019

Pulito 7

Description

(2m)

IB.2018

Pulito 6

IB.2020

Handle with air regulator, 280mm, swivel inlet for flexible hose

CDR.1006

CDR.1006

CDR.1543

CDR.1543

CDR.1543

CDR.1543

Flat lance

CDR.1003

CDR.1003

CDR.1017

CDR.1017

CDR.1017

CDR.1017

Dusting brush

CDR.1002

CDR.1002

CDR.1016

CDR.1016

CDR.1016

CDR.1016

Upholstery attachment

CDR.1001

CDR.1001

Reduction for accessories

-

-

-

-

-

-

CDR.1539

CDR.1539

CDR.1539

CDR.1539

Extension wand

CDR.1004

CDR.1004

CDR.1540

CDR.1540

CDR.1540

CDR.1540

Multipurpose nozzle

CDR.1011 + CDR.1013

CDR.1011 + CDR.1013

CDR.1541

CDR.1541

CDR.1541

CDR.1541

Multipurpose nozzle for liquids

CDR.1011 + CDR.1014

CDR.1011 + CDR.1014

CDR.1542

CDR.1542

CDR.1542

CDR.1542

Combined multipurpose nozzle

CDR.1047

CDR.1047

Polyester filter

CDR.1645

CDR.1645

CDR.1646

CDR.1646

CDR.1646

CDR.1646

Basket for polyester filter

CDR.1643

CDR.1643

CDR.1644

CDR.1644

CDR.1644

CDR.1644

Motor for dust and liquid vacuum cleaners

CDR.1240

CDR.1240

CDR.1240

CDR.1240

CDR.1240

CDR.1647

CopyrightŠ Idrobase Group. All rights reserved.

-

-

-

-

39


Car Wash Carpet cleaner

MADE IN ITALY

Lavabene 4

Ideal for cleaning the interiors of medium/ small vehicles such as cars and vans. Equipped with tank for the clean water inside the polyethylene drum.

Accessories included

Hose 2m Model

IB.0013

Lavabene 4

n° Motors

1 - twostage

Pump power

Flow rate

48W

0,8l/min

Pump pressure

2bar

Drum capacity

27L

Detergent Max power drum

6,2L

1,2kW (1x230V-50/60Hz)

Dimensions WxLxH

400 x 400 x 600mm

Lavabene 5

Professional vehicle interior cleaner ideal for thorough cleaning of coaches and busses. Easy to use, equipped with a steel drum and dirty water drain on the side.

Accessories included

Hose 2,5m Model

IB.0014

Lavabene 5

n° Motors

2 - twostage

Pump power

48W

Flow rate Pump pressure

0,8l/min

2bar

Air flow

340m³/h

Drum Detergent capacity drum

60L

25L

Max power

1,2kW (1x220/240V 50/60Hz)

Dimensions WxLxH

600 x 700 x 920mm

Copyright© Idrobase Group. All rights reserved.


Car Wash Professional vacuum cleaner

MADE IN ITALY

Puliturbo

Professional vacuum cleaner equipped with a motor combined by belt with a turbine. A practical solution, handy and easy use, suitable for continuous work. Can be used for thorough cleaning of busses, in repair garages, and in combination with machines that carry out machining operations on metal and plastic. With manual filter shaker on the side.

Accessories included Hose 4,5m

2x Model

n° Motors

Air flow

Waterlift

Drum capacity

Filter surface Max power

Dimensions WxLxH

IB.0015

Puliturbo 1

1 - threestage turbine

350m³/h

2100mm

60L

7000cm³

2,2kW (1x230V-50/60Hz)

1200 x 600 x 1100mm

IB.0016

Puliturbo 2

1 - threestage turbine

350m³/h

2630mm

60L

7000cm³

3kW (3x400V-50/60Hz)

1200 x 600 x 1100mm

Copyright© Idrobase Group. All rights reserved.

41


Car Wash Interior products display

MADE IN ITALY

g

a

b f c

e

d

Code

Description

Complete wall display unit, composed of: • no. 1 wall display unit (d) • no. 50 carpet protector mats 400 x 500mm • no. 50 polyester seat covers • no. 1 dispenser with st. wheel cover film (c) • no. 50 st.wheel covers in non-woven fabric (f) • no. 50 gearshift covers in non-woven fabric (f)

a

ZX.B2AA2

b

CDR.1813-5

c

CDR.1813

d

CDR.1810

Blue wall display unit. Also available in red or grey on request

e

CDR.1815-13

Seat cover 700 x 1650mm in white polyester 13mcr, package of 250 pieces. Available in other thicknesses on request

f

CDR.1814

Steering wheel and gearshift covers made of non-woven fabric. Package contains 50 steering wheel covers and 50 gearshift covers

g

CDR.1811-70

Carpet protector mats, 450 x 500mm, thickness 70g, package of 250 pieces Available in other thicknesses/sizes on request

Handle with 5 reels of stretch film for covering steering wheel and gearshift. Handle for stretch film reels

Copyright© Idrobase Group. All rights reserved.


Car Wash Dosing pumps

Water powered dosing pump

Code

Dosage percentage

CDR.1437

0,3% - 2%

CDR.1438

0,4% - 4%

Dosing pump for car wash • connection: 3/4" BSPT • water pressure: 0,2-8bar • flow rate: 10-2500l/h

Material:

• Seal made of *Viton® and O-Ring made of Aflas • Spring made of Hastelloy, highly resistant to corrosion • Body in polyamide reinforced with 30% fiberglass

Features & benefits: Power supply: water

Analogue dosing pump

• Extremely precise product dosing • It works with just the water pressure • Very easy maintenance

Code

Seal

Ideal for

CDR.1409

*VITON®

Wax

CDR.1410

Dutral

Shampoo

Analogue dosing pump

protection rating IP65, max flow rate 4l/h at 10bar. Propylene housing reinforced with fiberglass, ceramic double ball valves.

Complete with:

• Foot valve for production suction • Injection valve • Delivery pipe ø4x6mm • Suction/discharge pipe ø4x6mm Digital version available on request

Power supply: electricity MADE IN ITALY

Pneumatic dosing pump

Code

Seal

Ideal for

CDR.1413

*VITON®

Wax

CDR.1414

Dutral

Shampoo

Pneumatic dosing pump,

max flow rate 4l/h at 10bar. Polypropylene housing, ceramic double ball valves, air supply pressure 6/8bar, air inlet for pipe ø6x8mm, solenoid valve 24V-50/60Hz with connector. Can be installed horizontally, on the wall, DIN rail.

Complete with:

• Foot valve for production suction • Injection valve • Delivery pipe ø4x6mm • Sucking/discharge pipe ø4x6mm Power supply: air MADE IN ITALY

Copyright© Idrobase Group. All rights reserved.

*VITON® is a registered trademark of Dupont

43


Car Wash

O3 Car Purifier

MADE IN ITALY

Intake louver Outtake louver Ozone

Start/Stop Battery charger connector

Work settings switch

ON/OFF O3 Car Purifier

Sanitize and purify your car O3 Car Purifier is particularly suitable for sanitising and deodorising cars and vans. With its power to destroy the concentrations of fungi, mites, bacteria, and viruses and the molecules perceived by the sense of smell in general, ozone is well known for its sanitizing and deodorizing properties.

Depending on the dimensions of the space to be treated and the conditions of odour pollution, the duration of the treatment can be chosen between: 20, 40, 60 and 120 minutes

The battery is designed to last for about eight hours of treatment

When the battery is completely discharged, it takes about 12 hours to fully recharge

Caution: always keep people and animals out of the space during treatment.

Technical data Code

Model

Ozone Generator

CDR.1761

O3 CAR PURIFIER

100mg/h

Battery

12V-7Ah Lasts 8h continuous

Electrical Power

Electrical Supply

Dimensions

10W

12Vdc

80 x 160 x 150mm

CopyrightŠ Idrobase Group. All rights reserved.


Car Wash

Kit Life Car

MECHANICAL does not require electricity

Kit Life Car The dosing system for Car Washes,self-service and automatic washing, bus and truck washing. Ideal for introducing detergents and waxes into the water stream for cleaning vehicle bodies, alloy wheels, motors and mechanical parts.

Operating principle

Potable water

Pressure regulator

Filter 200Mesh/80microns

The Life Car dosing system, directly connected to the water supply line, uses the water pressure to activate the dosing system, sucks the concentrated product and mixes it with water according to the required percentage (which can be set by the operator). The resulting solution is sent to the lines connected to the system. The Life Car dosing system is completely mechanical, guaranteeing precision and regularity.

Safety valve

Tank with concentrated product

Technical data Code

Model

Fl. rate

Pressure

% dosage

Concentrated product consumption

ZX.1707

Light Car

10 to 2500l/h

0,3 to 6bar

from 0,2 to 2

0,02 to 50l/h

ZX.1708

Extreme Car

10 to 2500l/h

0,3 to 6bar

1 to 5

0,1 to 125l/h

Life Car advantages

Components

• The easiest and most convenient method for professional washing

• 1 pressure stabiliser

• Reduction of personnel costs and time required

• 1 10" filter, with washable cartridge 50microns + pressure gauge

• Reduction of maintenance costs

• 1 Dosatron

• Extreme precision in concentrated product dosing

• 1 PVC ball valve for line closing

• No risk of dosing errors

• 1 suction hose for chemicals

• Less product wasted

• 10m PVC hose

• 1 stainless steel nozzle, ang. 110°, flow rate 030

• 1 gun with 600mm SS lance Copyright© Idrobase Group. All rights reserved.

45


Car Wash Solenoid valves

MADE IN ITALY

IT.0400-24

IT.0400-230

IT.0401-24

Solenoid valve brass body with plug, NC, G3/8"F-F, 24V, 16bar, seal FKM, IP65

Solenoid valve brass body with plug, NC, G3/8"F-F, 230V, 16bar, seal FKM, IP65

Solenoid valve brass body with plug, NC, G1/2" F-F, 24V, 16bar, seal FKM, IP65

Water temperature -10 to +130°C

Water temperature -10 to +130°C

Water temperature -10 to +130°C

IT.0401-230

IT.0402-24

IT.0403-24

Solenoid valve brass body with plug, NC, G1/2" F-F, 230V, 16bar, seal FKM, IP65

Solenoid valve brass body with plug, NC, G3/4" F-F, 24V, 16bar, seal FKM, IP65

Solenoid valve brass body with plug, NC, G1" F-F, 24V, 16bar, seal FKM, IP65

Water temperature -10 to +130°C

Water temperature -10 to +130°C 230V version on request

Water temperature -10 to +130°C 230V version on request

IT.0404-24

IT.0405-24

IT.0405-230

Solenoid valve SS body with plug, NC, G1/2" F-F, 24V, 16bar, seal FKM, IP65

Solenoid valve SS body with plug, NC, G1/8" F-F, 24V, 150bar, seal Ruby*, IP65

Solenoid valve SS body with plug, NC, G1/8" F-F, 230V, 150bar, seal Ruby*, IP65

Water temperature -10 to +130°C 230V version on request

IT.0406-24 Solenoid valve SS body with plug, NC, G1/4" F-F, 24V, 100bar, seal Ruby*, IP65

Water temperature -10 to +130°C

IT.0420-24 Coil 24V, 50/60Hz, 18VA, IP65

Water temperature -10 to +130°C

Water temperature -10 to +130°C

IT.0406-230

IT.0407-230

Solenoid valve SS body with plug, NC, G1/4" F-F, 230V, 100bar, seal Ruby*, IP65

Solenoid valve SS body with plug, N/O, G1/8" F-F, 230V, 55bar, seal Ruby*, IP65

Water temperature -10 to +130°C 240V version on request

Water temperature -10 to +130°C

IT.0420-230

IT.0421

Coil 230V, 50Hz, 240V-60Hz, 18VA, IP65

Connector with seal and fixing screw, 250V, IP65, PG9

*Ruby = syntheticCopyright© ruby, NC = Idrobase normally Group. closed,All NOrights = normally reserved. open


Car Wash Solenoid valves IT.0046

IT.0047

IT.0048

H.p. 2-way solenoid valve, 230V, 50/60Hz, 68bar, G3/8" F-F, NO. Stainless steel valve seat max 53l/min at 4bar

H.p. 2-way solenoid valve, 230V, 50/60Hz, 80bar, G3/8" F-F, NC. Stainless steel valve seat max 53l/min at 4bar

H.p. 2-way solenoid valve, 24V, 50/60Hz, 80bar, G3/8" F-F, NC. Stainless steel valve seat max 53l/min at 4bar

IT.0050

IT.0049

H.p. 2-way solenoid valve, 24V, 50/60Hz, 80bar, G1/2" F-F, NC. Stainless steel valve seat max 108l/min at 4bar

H.p. 2-way solenoid valve, 230V, 50/60Hz, 80bar, G1/2" F-F, NC. Stainless steel valve seat max 108l/min at 4bar

Pressure switches for low water IT.0379

IT.0380

IT.0381

IT.0382

Diaphragm pressure switch, NO, G1/8" M, 1÷10bar, 0,5A, 250V, IP54

Pressure switch cap for IT.0379

Diaphragm pressure switch, 3 contacts, G1/8" M, 1÷10bar, IP65

Pressure switch connector for IT.0381

MADE IN ITALY

MADE IN ITALY

Includes: screw, seal, nut; PG11

NC = normally closed,Group. NO = normally Copyright© Idrobase All rightsopen reserved.

47


Car Wash Detergents and chemicals

Double Green

MADE IN ITALY

Code

CDR.1708-10

CDR.1708-25

New Idroplus

Code

CDR.1707-10

CDR.1707-25

Idrowind

Code

CDR.1702-10

Idroalloy

Code

CDR.1704-10

Nero Gomme

Code

CDR.1705-12

Idromoq

Code

CDR.1703-10

Description

Weight

Detergent with an exclusive formulation for professional cleaning of car exteriors. The best synthesis of research and development applied to cleaning. Incomparable effectiveness on greasy dirt, smog, soil and oil residues

10kg

Description

Weight

The detergent for professional deep cleaning of heavy vehicle exteriors. For effectively removing even the most stubborn dirt, without damaging the vehicle surfaces

Description

25kg

10kg

25kg

Weight

The specific formulation makes it possible to polish and protect plastic surfaces such as dashboards, bumpers, and mudguards. 10kg It is also suitable for wood and rubber surfaces

Description

Weight

Concentrated detergent, effectively cleans any type of rim in aluminium and related alloys

10kg

Description

Weight

Specially formulated detergent designed for polishing, cleaning, renewing and protecting tyres, enhancing and restoring their original appearance. For an anti-aging effect that lasts several days, protecting the tyres from hardening and cracking caused by solar radiation

12kg

Description

Weight

Detergent for deep cleaning all the fabric surfaces of the car such as seats, carpets, door panels and floor mats. 10kg The specific formulation ensures excellent cleaning results with a long-lasting protectant effect on the surfaces

CopyrightŠ Idrobase Group. All rights reserved.


Car Wash MADE IN ITALY

Chamois leather

Code

ZX.44X30 ZX.55X36 ZX.67X44

Size

440 x 300mm 550 x 360mm 670 x 440mm

Chamois leather, Chamois leather for fast and gentle cleaning and polishing of the car body. Ideal for all surfaces, your chamois cloth is the perfect solution that leaves no marks. Eco-friendly product treated with pure fish oil.

Sanitising agent for cars

Code

CDR.1913 A-Aria Pura: is the best solution for killing bacteria in your car: not only to clean and disinfect your car but also to sanitise the interior spaces, air conditioning ducts and vents, fans and air ducts. Spray can 150ml.

CopyrightŠ Idrobase Group. All rights reserved.

49


Car Wash H.p. hose reel

MADE IN ITALY

RA.AV1100FE

RA.AV1100

ZX.1111

Automatic hose reel, made of painted steel, inlet G1/2" M, outlet G1/2" M, 200bar

Automatic hose reel, made of AISI 316 stainless steel, inlet G1/2" M, outlet G1/2" M, 200bar (without hose)

Manual hose reel, made of nylon, inlet G3/8" M, outlet M22x1,5 M, 200bar, 150°C

Automatic hose reel for hose ø1/2", 20m

Automatic hose reel for hose ø1/2", 20m

Manual hose reel for hose ø5/16", 18m

RA.ST20FE

RA.ST20

RA.KIT-10

Swivel bracket, made of painted steel, for automatic hose reel RA.AV1100FE

Swivel bracket, made of AISI 316 stainless steel, for automatic hose reel RA.AV1100

Seal ø12mm, for automatic hose reel RA.AV1100FE and RA.AV1100

Manufactured before 01/2008 (check seal diameter)

RA.4961

RA.4962

RA.KIT-11

Swivel coupling, for painted steel automatic hose reel RA.AV1100FE

Swivel coupling, for AISI 316 stainless steel automatic hose reel RA.AV1100

Seal ø14mm, for automatic hose reel RA.AV1100FE and RA.AV1100

Manufactured after 01/2008 (check seal diameter)

Copyright© Idrobase Group. All rights reserved.


The copyright© of this catalogue is owned by IDROBASE GROUP® Srl. It is permitted to read, consult and circulate in hard copy or electronic format this catalogue for personal use only. It is not permitted to sell, reproduce or make any alterations to this catalogue without the prior written consent of IDROBASE GROUP® Srl. This catalogue replace the previous one Technical features, prices, data, tables and figures are just indicative. Any changes can be made by the company without prior notice.

i

p


idrobase.com

perfectcool.it

Idrobase Group s.r.l.

35010 BORGORICCO (PD) ITALIA - Via dell’Industria, 25 +39 049 9335903

+39 049 9335922

info@idrobasegroup.com

www.idrobasegroup.com

idrotech.com

clubdeiriparatori.com

Quality Certification n° 9.160 -IDR3 - 30/10/1998 UNI ES ISO 9001:2008

Auto Bella 2015 | En  

Keep your car shining for years EN

Auto Bella 2015 | En  

Keep your car shining for years EN