Page 1

Carrier for 3D Click Guide ; Thermoplastic or VPS

Copyright Š 2012 Idondivi, Inc. All rights reserved.


TAK thermoplastic granules or sticks soften in hot water ( 160 F) stay moldable for 5-10 minutes and are tough plastic once cooled.

Copyright Š 2012 Idondivi, Inc. All rights reserved

2


Case of two implants together WD & ND

Copyright Š 2012 Idondivi, Inc. All rights reserved

3


1 scoop of granules in hot water, white hard turns into clear moldable

Copyright Š 2012 Idondivi, Inc. All rights reserved

4


Plastic mass moldable with 1 % shrinkage

Copyright Š 2012 Idondivi, Inc. All rights reserved

5


Place soft mass onto teeth

Copyright Š 2012 Idondivi, Inc. All rights reserved

6


Place BLP in correct position, relative to the teeth and the estimate root position

Copyright Š 2012 Idondivi, Inc. All rights reserved

7


Repeat for the other implant

Copyright Š 2012 Idondivi, Inc. All rights reserved

8


Adjust so the mesio-distal position is exactly as desired relative to the visible tooth structures, and the estimated rootmorphology

Copyright Š 2012 Idondivi, Inc. All rights reserved

9


Add material as needed. The softened material stays pliable for 5- 10 minutes

Copyright Š 2012 Idondivi, Inc. All rights reserved

10


Reinforce as desired

Copyright Š 2012 Idondivi, Inc. All rights reserved

11


Thermoplastic material will harden in 1 hour at room temperature or 5 minutes in cold water

Copyright Š 2012 Idondivi, Inc. All rights reserved

12


Material can be adjusted, while appreciating the thermoplastic nature

Copyright Š 2012 Idondivi, Inc. All rights reserved

13


Vacuform vs thermoplastic, same case different materials, all work, you pick

Copyright Š 2012 Idondivi, Inc. All rights reserved

14


Carrier for 3D Click Guide ; VPS

Copyright Š 2012 Idondivi, Inc. All rights reserved.


VPS ; stiff bite registration material

Copyright Š 2012 Idondivi, Inc. All rights reserved

16


Blu-Mouse from Parkell is radio-opaque

Copyright Š 2012 Idondivi, Inc. All rights reserved

17

Do I have to use a vacuform carrier?  

Absolutely not, you can use a variety of materials. In general we like materials that can go over the height of contour of the teeth, so the...

Read more
Read more
Similar to
Popular now
Just for you