Page 1

TRAINING MANUAL

2011 Manual Spring2010_V3.indd 1

8/23/10 12:13:02 PM


STORMTECH Performance Apparel, based in Burnaby, British Columbia, is a private Canadian corporation that was founded in 1977. We began as a small promotional apparel company, and have since grown into a globally recognized Performance Apparel brand that is available at both the retail and corporate levels in North America, Asia, Europe, Latin America, and the South Pacific.

Manual Spring2010_V3.indd 2

8/23/10 12:13:10 PM


STORMTECH strives to set the standard for innovative, high quality performance apparel. We are best known for our top technical collections, such as STORMTECH H2Xtreme速, which provides waterproof/breathable protection in the most severe and unpredictable of climates. Other technical lines, such as STORMTECH Dry-Tech速, provide lightweight, moisture wicking garments that keep athletes dry and comfortable.

Manual Spring2010_V3.indd 3

8/23/10 3:51:49 PM


Decorating technical apparel Heat transfer & silk screening are natural cHoices for decorating tecHnical apparel. However, every storMtecH garMent also Has a Hidden eMbroidery access panel to allow for Hiding tHe eMbroidery backing & resealing tHe stitcHing

WAterProof/breAthAble fAbric techNology

Moisture vapour escape Outshell

sealing embroidery A number of products are available that can be used to seal embroidered areas: 1. Embroidery backings, like Soft and Dry Wet Patches, or embroidery tapes are very easy to use. Simply place the patch/tape over the back of the embroidery, and apply pressure and heat at the same time. the heat will melt the sealant, which will then coat the threads and seep between the threads and into the pierced needle holes.

Embroidery Sealing System

Lining

H2XtrEME™ Membrane

4

|

Adhesive melts through the embroidered H2XTREME™ laminate to completely reseal the embroidered area.

STORMTECH PERFORMANCE APPAREL

Manual Spring2010_V3.indd 4

2. Silicone products available from outdoor stores will also work. these tend to come as either aerosols, in tubes, or in small bottles with an applicator brush. By applying the silicone to the back of the embroidery not only do the threads get coated, but the spaces in between get filled as well. Please Note: any shop that provides heat-seal transfer services should avoid using aerosol silicone products as it is also a lubricant and air-borne silicone can interfere with heat-transfers. 3. Wax products, such as Nikwax are also available from outdoor stores. Nikwax bonds to the fibers of the embroidery, but does not fill in the spaces between the threads. thus some of breathability is maintained.


stormtech layering technology tHe key to staying warM wHile active in cold weatHer is best acHieved by wearing a series of layers designed to trap warM air around your body wHile protecting you froM tHe eleMents.

1. base

L Ayer

The FirST LAyer wickS The MoiSTure AwAy FroM your BoDy. coMpreSSion BASe LAyerS ALSo heLp To iMprove MuScLe perForMAnce AnD recovery TiMe in BoTh hoT AnD coLD conDiTionS.

SAT0036 Dry-Tech L/S LAyering Tee

2. mid

3. out

LAyer

SheLL

The SeconD LeveL oF LAyering proviDeS TherMAL inSuLATion - BuT ALSo wicking properTieS So ThAT Any MoiSTure wickeD To The Top oF The BASe LAyer iS FurTher TrAnSporTeD AwAy FroM The BoDy. BMF-1 ecLipSe BonDeD FLeece SheLL

Manual Spring2010_V3.indd 5

The ouTSheLL LAyer proTecTS The BoDy FroM The eLeMenTS. BoTh STorMTech h2X® AnD h2XTreMe® FABricS proviDe eXceLLenT Top LAyer TechnoLogy.

XBr-1 LASer-Tech h2XTreMe™ SheLL

8/23/10 12:14:01 PM


technologY technolog STORMTECH offers a wide range of technologies to suit the diversity of its clients needs. These requirements can range from providing enough protection for a sudden rain shower, to absolute waterproof protection & high levels of breathability for those who work or play hard in the most extreme weather conditions.

best H2Xtreme® A polyurethane based membrane that is bonded to the underside of the outshell, providing a minimum of 5000 mm of waterproofness and also 3000 g/m2/24hr breathability. H2X® A permenant coating that is applied to the underside of the garment, providing a minimum of 1000 mm of waterproofness and breathability. All H2X & H2Xtreme garments have waterproof and breathability ratings. 15,000 mm waterproof means that if that fabric were bonded underneath a tube that was 15 meters tall, the tube could be filled with water and it would take 24 hours before any would begin to soak through the fabric. Alternatively, the breathability rating measures how much water vapour could move through the fabric over 24 hours if the water was boiled and then collected as it condensated. H2X® and H2Xtreme® ratings refer only to the outshell fabrication of the garment. If the seams of a garment are not sealed then over time moisture can seap in, especially as the garment is used more.

better The STORMTECH Durable Water Resistant (D/W/R) barrier is a light version of our H2X coating. It provides permanent protection of up to 600 mm and offers excellent breathability.

R EP

EL

good DuPont™ fabric protector

6

|

Teflon is a water repellent application applied to the surface of a garment that causes water to bead up and roll off the surface of the garment. Also helps prevent against stains from spills.

STORMTECH PERFORMANCE APPAREL

Manual Spring2010_V3.indd 6

8/23/10 12:14:18 PM


technical ShellS hell hellS This category of jackets is designed to look great while protecting you from the harshest of elements. They can be broken down into two catagories based on their outshell fabric; 1. Hardshell (Durable, anti-abrasive fabrics) 2. Softshells (Softer fabrics that allow for greater maneuverability. outshell

COUNTING THE LAYERS Besides being hard or softshell, this catagory can also be seperated based on the layers that make up each jacket; 1. 2. 3.

The outshell that everyone sees The waterproof/breathable membrane inside The inner liner against your skin

waterproof membrane

inner liner

3-LAYER GARMENTS The most technical (and expensive) collection of shells that we offer is the 3 Layer Bonded Collection. These garments have had the three layers mentioned above bonded together under high heat and pressure to form a single piece of technical fabric. This achieves a lighter, less bulky garment. Three layer bonded garments can include both hardshells and softshells. 2-LAYER GARMENTS Garments that are 2 Layer do not have a liner. They simply have the outshell bonded with a waterproof/breathable membrane underneith. These very lightweight shells are ideal for people who want to constantly wear different base layers with their jacket, or pack it up into a tiny bundle to conserve space. 2 ½ LAYER GARMENTS Shells that are 2.5 Layer are simply a 2 Layer shell with a liner stitched in. Because the liner is not bonded in (as with 3 Layer jackets) the garment is more bulky and slightly heavier. However, this design also allows for a cushion of air to circulate between one’s body and the jacket, which provides some added warmth.

STORMTECH PERFORMANCE APPAREL

Manual Spring2010_V3.indd 7

|

7

8/23/10 12:14:26 PM


TECHNICAL JACKETS - CATEGORY OVERVIEW These charts displays a comparison of all the technical jacket produced by STORMTECH BONDED SHELLS Style

Seam Sealed

• • •

XBR-1 E-1 XJ-2

3 LAYER BONDED SHELL

8/5

HS-1

8/5

HST-1

8/3

HSP-1

8/3

BXT-2

8/3

BX-2

7/3

BXV-2

7/3

CXJ-1

Teflon

CXJ-2

Teflon

DX-1

Teflon

HSJ-1

Teflon

XJF-1

Teflon

XG-1 XGP-1 XWS-1

2 LAYER HARDSHELL

8/3

S-1

T-1

SSR-1 SSR-2

3 LAYER BONDED SOFTSHELL

10/10 8/5

• • • • • • •

Style

15/15

XJ-1

T-2 2.5 LAYER HARDSHELL

SYSTEM JACKETS Fabric WP/BR

Seam Sealed

EP-1 DB-1 2.5 LAYER HARDSHELLS

VPR-1 LJX-1 SPX-2 HJX-1

• • • • • •

DF-2

B-1

2.5 LAYER HARD SHELL

Fabric WP/BR 8/5

• •

VPX-4 XR-4

5/3 2/1

XLT-2

D/W/R

TR-1

D/W/R

TPX-2

D/W/R

THERMAL SHELLS Style

Seam Sealed

XF-1 2.5 LAYER XRT-2 HARDSHELLS CMX-1

10/10

Fabric WP/BR D/W/R D/W/R D/W/R

10/5 8/5 8/5

LIGHT-WEIGHT SHELLS

2/1

Style

8/3 5/3

WINDSHIRTS

INSULATED SHELLS Style

Seam Sealed

Fabric WP/BR

Fill

FULL-ZIP JACKETS

Seam Sealed

Fabric WP/BR

WR-1

D/W/R

SR-1

D/W/R

ESX-1

D/W/R

XMR-1

D/W/R

XR-1

D/W/R

10/10

Poly

PX-1

D/W/R

5/3

Down

VR-1

D/W/R

5/3

Poly

3/3

Down

EVX-1

D/W/R

2/1

Poly

2/1

Poly

PCX-1

D/W/R

D/W/R

Down

VESTS

PONCHO

Note: CXJ-1, CXJ-2, HSJ-1 & XJF-1 all utilize the same bonded softshell outshell. HS-1, B-1, S-1, & HSP-1 all utilize the same bonded softshell outshell.

8

|

STORMTECH PERFORMANCE APPAREL

Manual Spring2010_V3.indd 8

8/23/10 12:14:28 PM


Soft Sh ellS

best

SEALED SEAMS

SEALED SEAMS

new CoLouR

new CoLouR

xbR-1 Laser-Tech h2XTreMe® Shell

• 3 Layer Bonded Soft Shell• 15,000/15,000 • Seamless

xJ-2 h2XTreMe® Waterproof

Bonded Shell • 3 Layer Bonded Soft Shell • 8,000/3,000 • Seam Sealed

better

new CoLouR

hst-1 Epsilon H2XTREME® Textured Jacket • 8,000/3,000

new CoLouR

hs-1 Epsilon H2XTREME® Jacket • 8,000/5,000

xJ-1 Aeronaut Soft Tech Bonded Shell • 8,000/5,000

DuPont™

EL EP R

R

EP

EL

good DuPont™

fabric protector

fabric protector

new styLe

hsJ-1 Crew Bonded Shell • Water Repellent

Manual Spring2010_V3.indd 9

CxJ-1 Crew Bonded Jacket • Water Repellent

8/23/10 12:15:12 PM


best XBr-1 laser-tech h2Xtreme® shell • • • • •

flagship technical t shell 3 layer bonded softshell 15,000 mm waterproof fabric 15,000 g/m2/24 hr breathable w welded seam construction

StorMteCh h2xtreMe perforMaNCe softshell, technical shells & ski Pants

Soft ShellS S hell hellS

xbr-1: r red ed

S E A LE D SEAMS

xbr-1 | xbr-1w

LasEr-tEch

xbr-1W: black

h2xtreme® shell

black

Performance features: Ultrasonic Welded Seam ensure Maximum Waterproofing Seam Sealed Set-in Sleeves with laser-Cut adjustable Cuff tabs Navy built-in adjustable articulated hood Waterproof Chest pocket with audio port Side and Chest Zippered pockets with Welded frame reversed tape Waterproof Center front Zipper with full-length Inner Storm placket

red

Side and Chest Zippered pockets with Welded frame

Stitchless Construction

Shell: 100% polyester, 205g/m (CDN)/7.2oz. (USa) ; 3-ply Waterproof/breathable Nylon lining: Inner laminated tricot Surface SizeS: (M’S) S-3xl ; (W’S) xS-2xl ColourS: red, black, Navy, electric blue, eggplant, Wasabi.

L/E L/E

: limited edition Colours.

new colours

Wasabi

laser-Cut adjustable Cuff tabs t

L/E electric blue eggplant

8

built-in adjustable articulated hood

page 8 of the fall 2010 international catalogue

Key Features:

1

2

3

4

5

6 10

|

W Water ProoF/BreathaBle 3-layer shell: Maneuverable/flexible outshell bonded with a 15,000 waterproof/breathable H2Xtreme® membrane and an inside lining advantage: • Maximum protection against the elements is achieved while maintaining an extremely lightweight & comfortable shell. • keeps you comfortable & dry by keeping the moisture out and allowing your body vapour to escape and regulate your own internal temperature. seWless constrUction: all of the seams on the Xbr-1 are ultra-sonically welded together and then reinforced with heat sealing tape. advantage: • sewless construction combined with the H2Xtreme® membrane provides absolute waterproof protection while you’re at your most active. • w welded seams are also flatter/more comfortable against the skin. they are also more flexible and lighter weight than stiched seams. W Water ProoF ZiPPers: not only do these tightly seal the pockets and main body of the jacket against the wind and rain, but the zippers are also themselves welded to the jacket so as to avoid any holes that would otherwise be caused by stitching. advantage: • keeps you warm and dry against the elements • protects any documents or electronics that you’ve got stored in your pockets. articUlateD hooD With Brim: drawcords allow the hood to be pulled tight, and the reinforced brim provides extra sturdiness as it extends over your face. advantage: • keeps the wind and rain off your head, which is the number one place where your body loses heat from • the brim extends out to keep the sun out of your eyes and the rain off your face. aUDio-access Port: ort internal port allows ear-bud access from the inside of your jacket to the waterproof ort: chest pocket. advantage: • this ensures that your ipod stays dry and prevents earbud cords from hanging outside of your jacket and catching on things. aDJUstaBle hem & cUFFs: laser cut tabs at the cuffs and a drawcord at the hem allow you to customize the fit of your jacket advantage: • keeps the wind, rain, and snow out of your jacket so that you can stay warm & dry. STORMTECH PERFORMANCE APPAREL

Manual Spring2010_V3.indd 10


better Soft ShellS hell hellS hs-1 ePsilon h2Xtreme® shell • 3 layer bonded softshell • 8,000 mm waterproof fabric • 5,000 g/m2/24 hr breathable

page 22 of the fall 2010 international catalogue

Key Features:

1

2

3 4

5

W Water ProoF/BreathaBle 3-layer shell: Maneuverable/flexible outshell bonded with a 8,000/5,000 H2Xtreme membrane and matrix fleece lining. advantage: • excellent weather protection is achieved while maintaining an extremely lightweight and comfortable shell. • keeps you comfortable and dry by keeping the moisture out and allowing your body vapour to escape and regulate your own internal temperature. WaterProoF PocKet: the bicep pocket has been welded onto the sleeve and the zipper is waterproof. advantage: • w welding avoids stitching that would create holes in the fabric and allow water into the pocket. • waterproof zipper ensures that the pocket is completely impenetrable to the elements. aUDio-access Port: ort this internal port allows ear-bud access from the inside of your jacket to ort: the chest pocket. advantage: • prevents earbud cords from hanging outside your jacket and catching on anything. aDJUstaBle, articUlateD hooD: drawcords on the front and back allow the hood to be pulled tight. advantage: • keeps the wind and rain off your head, which is the number one place where your body loses heat from. aDJUstaBle hem & cUFFs: laser cut tabs at the cuffs and a drawcord at the hem allow you to customize the fit of your jacket. advantage: • keeps the wind and rain / snow out of your jacket so that you can stay warm and dry.

STORMTECH PERFORMANCE APPAREL

Manual Spring2010_V3.indd 11

|

11


good Soft ShellS S hell hellS hsJ-1 creW BonDeD shell • 3 layer bonded softshell • wind / water repellent

page 32 of the fall 2010 international catalogue

Key Features:

1

2 3

4

12

|

WinD/Water rePllent 3-layer shell: Maneuverable/flexible outshell reinforced with t teflon technology advantage: • basic protection from the elements while maintaining an extremely lightweight and comfortable shell. • spills on the surface of the jacket like coffee or other liquids beed up and roll off before they can stain the jacket aUDio-access Port: ort this internal port allows ear-bud access from the inside of your ort: jacket to the chest pocket. advantage: • prevents earbud cords from hanging outside your jacket and catching on anything. aDJUstaBle, articUlateD hooD: drawcords on the front and back allow the hood to be pulled tight advantage: • keeps the wind and rain off your head, which is the number one place where your body loses heat from aDJUstaBle hem & cUFFs: laser cut tabs at the cuffs and a drawcord at the hem allow you to customize the fit of your jacket. advantage: • keeps the wind and rain / snow out of your jacket so that you can stay warm and dry.

STORMTECH PERFORMANCE APPAREL

Manual Spring2010_V3.indd 12

8/23/10 12:15:48 PM


h arDSh ellS

best

SEALED SEAMS

e-1m Edge H2XTREME® Shell • 10,000/10,000 • Seam Sealed • 3-Layer Bonded Hardshell

better SEALED SEAMS

t-2m Freestyle H2XTREME® Shell • 10,000/10,000 • Seam Sealed • 2.5-Layer Bonded Hardshell

SEALED SEAMS

t-1 TriTon h2XTreMe® Shell • 10,000/5,000 • Seam Sealed • 2.5-Layer Bonded Hardshell

good D / W / R

xRt-2 Nordic Thermal Shell • D/W/R • Fleece Lined

Manual Spring2010_V3.indd 13

D / W / R

Cmx-1 Fleet Micro

Reversible Jacket • D/W/R • Fleece Lined

D / W / R

xf-1 Apex Fleece Lined Jacket • D/W/R • Fleece Lined

8/23/10 12:16:23 PM


best e-1 eDge h2Xtreme® shell • 3 Layer bonded hardshell • 10,000 mm waterproof fabric • 10,000 g/m2/24 hr breathable • Seam sealed The Edge Shell is a 3 Layer Bonded Hardshell - so it is more durable and anti-abrasive than the XBR1 and XJ-2. It is also between the two in terms of its waterproof/breathability rating, and is completely seam sealed.

e-1M: red/Greystone

StorMteCh h2xtreMe perforMaNCe softshell, technical shells & ski Pants

harD ShellS har hell hellS

e-1W: black/Greystone

E-1m | E-1w

EdgE

h2xtreme® shell

PerformanCe featureS: extreme performance, fully Seam-Sealed, Waterproof / breathable 3-ply Shell laser-Cut and bonded Chest & bicep pocket laminated front placket & hood brim Stowable, adjustable, articulated hood extra long pit-Zips (15”) for Superior breathability

extra long pit-Zips for breathability

Waterproof Chest & bicep pocket

Shell: 100% Nylon, 175g/m (CDN)/6.2oz. (USa); 3-ply Waterproof/breathable Nylon lining: Inner laminated tricot Surface SizeS: (m’S) S-3xl ; (W’S) xS-2xl ColourS: black/Greystone, Navy/Greystone (M’s only), red/Greystone (M’s only).

laser-Cut adjustable Cuff tabs

adjustable Drawcords

black/Greystone

16

Navy/Greystone (M’s only)

red/Greystone (M’s only)

Stowable, adjustable, articulated hood

page 16 of the fall 2010 international catalogue

Key Features: W Water ProoF/BreathaBle 3-layer shell: durable/anti-abrasive outshell bonded with a 10,000/10,000 H2Xtreme® membrane and an inside lining advantage: • Maximum protection against the elements & surroundings is achieved while maintaining an extremely lightweight & comfortable shell • keeps you comfortable & dry by keeping the moisture out and allowing your body vapour to escape and regulate your own internal temperature.

1

seam sealeD: the seams are all taped on the inside of the jacket. advantage: • sealed seams combined with the H2Xtreme® membrane ensures waterproof protection • keeps you comfortable & dry by keeping the moisture out and allowing your body vapour to escape and regulate your own internal temperature.

2

W Water ProoF PocKets: the chest & bicep pockets have been welded onto the jacket & the zippers are waterproof advantage: • w welded seams avoid stitching that would create holes in the fabric and let water in • waterproof zippers ensure that the pocket is completely impenetrable to the elements

3

aUDio-access Port: ort internal port allows ear-bud access from the inside of your jacket to the waterproof ort: chest pocket. advantage: • this ensures that your ipod stays dry and prevents earbud cords from hanging outside of your jacket and catching on things.

4

rollaWay rollaW Way hooD: the waterproof, fully lined and adjustable hood can be rolled inside the collar of the jacket. advantage: • keeps the wind and rain off your head, which is the number one place where your body loses heat from • this makes the jacket relevant for a broader range of seasons.

5

6

Pit ZiPs: under-arm zippers that provide access for air circulation. advantage: • allows you to instantly cool off by letting out hot air/letting in cool air

7

storm FlaP: although the main body zipper is not waterproof, it is covered by this flap advantage: • keeps the wind and moisture from penetrating the zipper

14

|

STORMTECH PERFORMANCE APPAREL

Manual Spring2010_V3.indd 14


better BonDeD harD ShellS hell hellS t-2

Freestyle h2Xtreme® shell Detachable, Adjustable, Hood

SEALED SEAMS Laser-Cut Adjustable Cuff Tabs

Adjustable Drawcords

Waterproof Arm Pocket

Extra Long Pit-Zips for Breathability

T-2M: Seal Brown (Texture)

T-2M | T-2W

Hidden Embroidery Access Panel

T-2W: Black

FREESTYLE®

h2xtreme shell

PERFORMANCE FEATURES: Extreme Performance, Fully Seam Sealed, Waterproof/Breathable Outshell Laser-Cut and Bonded Arm Pocket with Waterproof Zipper Front Chest Patch Pockets with Bellows and Side Zip Entry On-Seam Zip Pockets and Laminated Front Placket Long Pit-Zips For Superior Breathability Upper Body Microfleece Lined Inside Pockets and Adjustable Drawcord at Hem Adjustable Hood

STORMTECH H2XTREME PERFORMANCE SOFTSHELL, TECHNICAL SHELLS & SKI PANTS

• 2.5 Layer hardshell • 8,000 mm waterproof fabric • 3,000 mm breathable • Seam Sealed

Navy

Red

SHELL: 100% Nylon, 125g/m (CDN)/4.4oz. (USA) 100% polyester (Seal Brown Texture) LINING: Fully Lined with Microfleece and Taffeta, 165g/m (CDN)/5.8oz. (USA) SIZES: (M’S) S-3XL ; (W’S) XS-2XL COLOURS: Black, Navy, Red, Seal Brown (Textured).

Black Seal Brown (Texture)

21

Key Features:

1

2 3

page 21 of the fall 2010 international catalogue

WATERPROOF/BREATHABLE 2.5-LAYER SHELL: Durable/Anti-Abrasive outshell bonded with a 10,000/10,000 H2Xtreme® membrane and a fleece liner stitched inside Advantage: • Maximum protection against the elements & surroundings is achieved while maintaining an extremely lightweight & comfortable shell • Keeps you comfortable & dry by keeping the moisture out and allowing your body vapour to escape and regulate your own internal temperature. SEAM SEALED: The seams are all taped on the inside of the jacket. Advantage: • Sealed seams combined with the H2Xtreme membrane ensures excellent waterproof protection WATERPROOF POCKETS: The bicep pocket is part of the waterproof outshell & has a waterproof zipper on it Advantage: • Protects any documents / electronics that you’ve got stored in your pockets AUDIO-ACCESS PORT: Internal port allows ear-bud access from the inside of your jacket to the waterproof chest pocket. Advantage: • This ensures that your ipod stays dry and prevents earbud cords from hanging outside of your jacket and catching on things.

4

5 6

ROLLAWAY HOOD: The waterproof, fully lined and adjustable hood can be rolled inside the collar of the jacket. Advantage: • Keeps the wind and rain off your head, which is the number one place where your body loses heat from • This makes the jacket relevant for a broader range of seasons. PIT ZIPS: Under-arm zippers that provide access for air circulation Advantage: • Allows you to instantly cool off by letting out hot air/letting in cool air STORM FLAP: Although the main body zipper is not waterproof it is covered by this flap Advantage: • Keeps the wind and moisture from penetrating the zipper STORMTECH PERFORMANCE APPAREL

Manual Spring2010_V3.indd 15

|

15


good harD ShellS har hell hellS Xrt-2 norDic thermal shell • 2.5 Layer hardshell • D/W/R Durable Water Resistant • Polar Fleece Lining

page 59 of the fall 2010 international catalogue

Key Features:

1

2

3

16

|

WaterProoF/BreathaBle 2.5-layer shell: durable/anti-abrasive outshell coated with an extremely breathable, 600 mm water resistant d/w /w/ /w w/r application. advantage: • the d/w /w/ /w w/r coating will never wash or wear out – and shields you from the wind and rain. • keeps you comfortable and dry by keeping the moisture out and allowing your body vapour to escape and regulate your own internal temperature. anti-Pill Polar Fleece lining: advantage: • keeps the wind and rain off your head, which is the number one place where your body loses heat from. • Makes the jacket relevant for a broader range of seasons. aDJUstaBle hem & cUFFs: cuff tabs and a drawcord at the hem allow you to customize the fit of your jacket. advantage: • keeps the wind and rain out of your jacket so that you can stay warm and dry.

STORMTECH PERFORMANCE APPAREL

Manual Spring2010_V3.indd 16

8/23/10 12:16:45 PM


i n Sul ate D o u te r We a r

best SEALED SEAMS

SEALED SEAMS

new styLe

db-1 Rogue Boarding Jacket • 5,000/3,000 • Seam Sealed • Down/Feather

new styLe

LJx-1 Icebreaker Down Long Jacket • 3,000/3,000 • Seam Sealed • Down/Feather

Down: Down is more fluffy than regular feathers, which allows it to trap air and provide excellent insulation; in fact, down is the warmest, lightest insulation (and most expensive) available. It also wicks moisture and is highly compressible and lightweight. Feathers: Feathers are not as warm as down - but when mixed with down they help prevent clumping. Mixing feathers in with down also reduces the cost of a garment. Polyfill: This is a synthetic insulation that provides warmth at a much lower price than down. It is more bulky and heavy than down, but it has some benefits over the natural alternative.

better W AT E R P R O O F B R E AT H A B L E

SEALED SEAMS

vpR-1 Orbit Thermal Bomber Shell • 5,000/3,000 • Seam Sealed • Polyfill

good

Unlike down which wicks moisture but is slow to dry, polyfill is water resistant and dries very quickly, so even when it does get wet it can still provide insulation. Polyfill also provides an excellent alternative to those with allergies to down or feathers.

D / W / R

new styLe

df-2 Peak Down Jacket • D/W/R • Down/Feather

Manual Spring2010_V3.indd 17

8/23/10 12:17:05 PM


best inSulateD outerWear Wear DB-1 rogUe h2Xtreme® DoWn JacKet Ket • 2.5 Layer hardshell • 5,000 mm waterproof fabric • 3,000 g/m2/24 hr breathable

• Seam sealed • 70/30 Down/Feather Fill

STORMTECH PERFORMANCE OUTERWEAR INSULATED JACKETS

NEW STYLE DB-1: Navy

NEW

DB-1W: Eggplant

STYLE

DB-1 | DB-1W

ROGUE

boarding jacket

Side Welted Zip Pocket

Detachable Adjustable Hood

SEALED SEAMS

Adjustable Cuff Tabs and Cuff Guards

Long Pit-Zips

Open Hem with Adjustable Drawcord

PERFORMANCE FEATURES: Fully Seam-Sealed, Waterproof / Breathable Set-In Sleeves with Adjustable Cuff Tabs and Thumb Hole Gators Stand-Up Collar Detachable Lined Hood with Brim Long Pit-Zips for Superior Breathability Right Chest and Sleeve Pockets with Waterproof Zips Side Welted Zip Pockets Full-Length Outer and Inner Storm Plackets Detachable Powder Skirt with Belt Loop Attachments Large Inside Pockets Open Hem with Adjustable Drawcord Embroidery Access SHELL: 100% Polyester, 150g/m (CDN)/5.3oz. (USA) LINING: 100% Nylon FILL: 70% Down, 30% Feather SIZES: (M’S) S-3XL ; (W’S) XS-2XL COLOURS: Black, Navy, Eggplant. : Limited Edition Colours.

L/E 40 Black

Navy

Eggplant

Embroidery Access

page 40 of the fall 2010 international catalogue

Key Features:

1

2

seam sealeD: the seams are all taped on the inside of the outshell. advantage: • sealed seams combined with the H2Xtreme membrane ensures excellent waterproof protection

3

W Water ProoF PocKets: the bicep pocket is part of the waterproof outshell & has a waterproof zipper on it advantage: • protects any documents / electronics that you’ve got stored in your pocket

4 5

18

W Water ProoF/BreathaBle 2.5-layer shell: durable/a urable/ nti-abrasive outshell bonded with a 5,000/3,000 urable/a H2Xtreme® membrane & a down/feather filling advantage: • keeps you comfortable & dry by keeping the moisture out and allowing your body vapour to escape and regulate your own internal temperature. • down provides the lightest, warmest possible insulation, while breathing & wicking

|

DetachaBle hooD: the waterproof, fully lined and adjustable hood can be zipped off. advantage: • keeps the wind and rain off your head, which is the number one place where your body loses heat from • this makes the jacket relevant for a broader range of seasons. storm FlaP: although the main body zipper is not waterproof it is covered by this flap advantage: • keeps the wind and moisture from penetrating the zipper

STORMTECH PERFORMANCE APPAREL

Manual Spring2010_V3.indd 18


better inSulateD outerWear ear VPr-1 orBit thermal BomBer shell VPR-1: Navy/Black

STORMTECH PERFORMANCE OUTERWEAR INSULATED JACKETS

• 2.5 Layer hardshell • 5,000 mm waterproof fabric • 3,000 g/m2/24 hr breathable • Seam sealed • Polyfill Lining

VPR-1: Black/Black

VPR-1

ORBIT PERFORMANCE FEATURES: Short-Length Center Inside Hem Contrast Lower Elbow Front Garages SHELL: LINING:

Center Front Placket with Gusset Snap VPR-1: Red/Black

Pocket Document Pocket Hood Front Hem Band Velcro Insulated Quilted

SEALED SEAMS

Contrast Shoulder/ Upper Sleeve Yokes

Waterproof Bicep Pocket

Adjustable Removable Hood

Dropped Back

Hem Tabs with Velcro

SIZES: (M’S) COLOURS: 48

page 48 of the fall 2010 international catalogue

Key Features:

1

W Water ProoF/BreathaBle 2.5-layer shell: durable/ urable/anti-abrasive outshell bonded with urable/ a 5,000/3,000 H2Xtreme® membrane & a down/feather filling advantage: • keeps you comfortable & dry by keeping the moisture out and allowing your body vapour to escape and regulate your own internal temperature.

2

DetachaBle, aDJUstaBle hooD: advantage: • keeps the wind and rain off your head, which is the number one place where your body loses heat from. • Makes the jacket relevant for a broader range of seasons

3

W Water ProoF PocKets: the bicep pocket is part of the waterproof outshell & has a waterproof zipper on it advantage: • protects any documents / electronics that you’ve got stored in your pocket

4 5

storm FlaP: protects the main body zipper from the wind and rain advantage: • keeps your body warm and dry aDJUstaBle hem & cUFFs: cuff tabs and a drawcord at the hem allow you to customize the fit of your jacket advantage: • keeps the wind and rain out of your jacket so that you can stay warm and dry.

STORMTECH PERFORMANCE APPAREL

Manual Spring2010_V3.indd 19

|

19


good inSulateD outerWear ear DF-2 PeaK DoWn JacKet • 2.5 Layer hardshell • D/W/R Durable Water Resistant • 70/30 Down/Feather Fill

page 41 of the fall 2010 international catalogue

Key Features: WinD/Water resistant 2.5-layer shell: durable/anti-abrasive outshell coated with an extremely breathable, 600 mm water resistant d/w /w/ /w w/r application. advantage: • the d/w /w/ /w w/r coating will never wash or wear out – and shields you from the wind and rain. • keeps you comfortable and dry by keeping the moisture out and allowing your body vapour to escape and regulate your own internal temperature.

1

internal storm FlaP: protects the main body zipper from the wind and rain advantage: • keeps your body warm and dry • because the flap is inside the jacket has a cleaner visual line.

2

aDJUstaBle hem & cUFF gUarDs: cuff guards fit snuggly around your wrists and a drawcord at the hem allows you to customize the fit of your jacket. advantage: • keeps the wind and rain out of your jacket so that you can stay warm and dry. • t traps the warm air inside your jacket to provided added insulation

3

20

|

STORMTECH PERFORMANCE APPAREL

Manual Spring2010_V3.indd 20

8/23/10 12:17:41 PM


SYSteM JacKetS

best SEALED SEAMS

vpx-4 Fusion 5-in-1 System Jacket • 5,000/3,000 • Seam Sealed

b-1 Epsilon 3-in-1 Soft Tech Shell • 8,000/5,000

better D / W / R

SEALED SEAMS

xR-4 Nova System Jacket

tR-1 Vortex System Jacket • D/W/R

• 2,000/1,000 • Seam Sealed

good D / W / R

tpx-2 Explorer 3-in-1 Parka • D/W/R

Manual Spring2010_V3.indd 21

D / W / R

xLt-2 Explorer 3-1 Jacket • D/W/R

8/23/10 12:18:10 PM


best SYSteM JacKet K S Ket • 2.5 Layer hardshell • Zip-Out Insulated Liner • Zip-off liner sleaves • 5,000 mm waterproof fabric • 3,000 g/m2/24 hr breathable • Seam sealed outshell

Key Features:

1

Zip-out polyfill liner

vpx-4: Navy/b Navy/black

Zip-off Sleeves (liner)

vpx-4 | vpx-4w

fusion

5-in-1 system jacket

vpx-4W: Stadium red/ ed/b black

Cool blue/black

black/black

Granite/black

PerformanCe featureS: Mid-length parka Centre front placket with elastic Gusset & Snaps with velcro Chest & Upper Sleeve Yokes front Welted panels with Zippered pockets Underarm Zippered vents Inside Zippered pocket adjustable velcro Cuff tabs Zippered Welded bicep pocket adjustable, Detachable hood Shell: 100% polyester and taffeta lining, 182g/m (CDN)/6.4oz. (USa) liner: 100% polyester, 115g/m (CDN)/4.1oz. (USa) with taffeta lining fill: polyfill, 85g/m (CDN)/3oz. (USa) (liner only)

Navy/black

51

page 51 of the fall 2010 international catalogue

3

W Water ProoF PocKets: the bicep pocket is part of the waterproof outshell & has a waterproof zipper on it advantage: • protects any documents / electronics that you’ve got stored in your pocket aDJUstaBle hem & cUFFs: laser cut cuff tabs at the cuffs and a drawcord at the hem allow you to customize the fit of your jacket advantage: • keeps the wind, rain, and snow out of your jacket so that you can stay warm & dry. DetachaBle hooD: the waterproof, fully lined and adjustable hood can be zipped off. advantage: • keeps the wind and rain off your head, which is the number one place where your body loses heat from • this makes the jacket relevant for a broader range of seasons.

6

Pit ZiPs: under-arm zippers that provide access for air circulation. advantage: • allows you to instantly cool off by letting out hot air/letting in cool air

7

storm FlaP: although the main body zipper is not waterproof it is covered by this flap advantage: • keeps the wind and moisture from penetrating the zipper

Manual Spring2010_V3.indd 22

adjustable Drawcord hem

SizeS: (m’S) S-4xl ; (W’S) xS-2xl ColourS: Granite/black, Navy/black, Stadium red/black, Cool blue/black, black/black.

W Water ProoF/BreathaBle 2.5-layer shell: durable/anti-abrasive outshell bonded with a 5,000/3,000 H2Xtreme® membrane and a zip out liner with detachable sleeves advantage: • all-season jacket that provides just the right amount of warmth & protection when needed • keeps you comfortable & dry by keeping the moisture out and allowing your body vapour to escape and regulate your own internal temperature.

STORMTECH PERFORMANCE APPAREL

adjustable laser Cut velcro Cuff tabs

Inside Zippered pocket

Stadium red/black

seam sealeD: the seams are all taped on the inside of the outshell. advantage: • sealed seams combined with the H2Xtreme membrane ensures excellent waterproof protection

5

|

Detachable, adjustable hood

pit-Zips with Snow Guard Mesh

2

4

22

The VPX-4 outshell is a 2.5 Layer Hardshell - so it has a durable, anti-abrasive outershell with a waterproof/breathable membrane bonded underneath - and then a mesh liner stitched in to promote air circulation. The liner of the VPX-4 is an insulated polyester shell that has an 85 g/m2 polyfill for extra warmth.

SEALED SEAMS

StorMteCh perforMaNCe oUterWear system jackets

VPX-4 stormtech 5-in-1 ParKa


better SYSteM JacKet K S Ket Xr-4 noVa system JacKet • 2.5 Layer hardshell • Zip-Out Fleece Liner • 2,000 mm waterproof fabric • 1,000 mm breathable • Seam sealed outshell

page 54 of the fall all 2010 international catalogue

Key Features:

1

2 3 4

W Water ProoF/BreathaBle 2.5-layer shell: durable/anti-abrasive urable/anti-abrasive outshell with H2X® 2,000/1,000 waterproof/breathable technology. advantage: • all-season ll-season jacket that provides just the right amount of warmth & protection when needed. • keeps eeps you comfortable & dry by keeping the moisture out and allowing your body vapour to escape and regulate your own internal temperature. seam sealeD: the he seams are all taped on the inside of the outshell. advantage: • sealed seams combined with the H2xtreme® membrane ensures excellent waterproof protection. ZiP oUt liner: the he liner is made of anti-pill fleece which has been lined with taffeta. t advantage: • fleece leece makes an excellent insulative liner under an outshell • the taffeta helps block the wind when the liner is worn on its own as a jacket. DetachaBle hooD: the waterproof, fully lined hood and adjustable hood can be zipped off. advantage: • keeps the wind and rain off your head, which is the number one place where your body loses heat from • this makes the jacket relevant for a broader range of seasons

5

Pit ZiPs: under-arm zippers that provide access for air circulation. advantage: • allows you to instantly cool off by letting out hot air/letting in cool air.

6

storm FlaP: although the main body zipper is not waterproof it is covered by this flap. advantage: • keeps the wind and moisture from penetrating the zipper.

7

aDJUstaBle hem & cUFFs: cuff tabs and a drawcord at the hem allow you to customize the fit of your jacket. advantage: • keeps the wind, rain, and snow out of your jacket so that you can stay warm and dry.

STORMTECH PERFORMANCE APPAREL

|

23


good SYSteM JacKet SYS K S Ket tPX-2 eXPlorer 3-in-1 ParKa • 2.5 Layer hardshell • Zip-Out Fleece Liner • D/W/R Durable Water Resistant

Page 57 of the Fall 2010 Page 57 of the Fall 2010 international catalogue

Key Features:

1

2 3

4 5

24

|

WinD anD Water resistant 2.5-layer shell: durable/anti-abrasive outshell with the permanent d/w /w/ /w w/r coating that blocks out the wind and rain. advantage: • the d/w /w/ /w w/r coating will never wash or wear out – and shields you from the wind and rain. • keeps you comfortable and dry by keeping the moisture out and allowing your body vapour to escape and regulate your own internal temperature. ZiP oUt liner: the liner is made of anti-pill fleece which has been lined with taffeta. t advantage: • fleece makes an excellent insulative liner under an outshell • the taffeta helps block the wind when the liner is worn on its own as a jacket. rollaW ollaWay ollaW Way hooD: the hood can be rolled into the collar when not being used. advantage: • keeps the wind and rain off your head, which is the number one place where your body loses heat from • this makes the jacket relevant for a broader range of seasons storm FlaP: although the main body zipper is not waterproof it is covered by this flap. advantage: • keeps the wind and moisture from penetrating the zipper. aDJUstaBle hem & cUFFs: cuff tabs and a drawcord at the hem allow you to customize the fit of your jacket. advantage: • keeps the wind, rain, and snow out of your jacket so that you can stay warm and dry.

STORMTECH PERFORMANCE APPAREL

Manual Spring2010_V3.indd 24

8/23/10 12:18:40 PM


Sport Sh ellS

best SEALED SEAMS

SEALED SEAMS

xG-1 Trident MicroflexTM Storm ssR-2 Stratus Storm Jacket Shell • 10,000/10,000 • Seam Sealed • 5,000/3,000 • Seam Sealed • 2.5-Layer Bonded • 2.5-Layer Bonded Hardshell Hardshell

SEALED SEAMS

ssR-1 Nautilus Storm Shell

• 8,000/3,000 • Seam Sealed • 2.5-Layer Bonded Hardshell

better D / W / R

xmR-1 Fleet Ripstop Rainshell • 5,000/3,000 • D/W/R • 2-Layer Hardshell

D / W / R

sR-1 Micro Light Shell • D/W/R • Mesh Lining

good D / W / R

xRt-2 Nordic Thermal Shell • D/W/R • Fleece Lined

D / W / R

px-1 Squall Packable Jacket • D/W/R • Mesh Upper Body

D / W / R

pCx-1 Aerolite Packable Rain Poncho • D/W/R • 86g/m2 (3 oz)

8/23/10 12:19:13 PM


best Sport port ShellS S hellS hell Xg-1 triDent microFleX™ storm shell • 2.5 Layer hardshell • 8,000 mm waterproof fabric • 5,000 mm breathable • Seam Sealed

page 62 of the fall 2010 international catalogue

Key Features: WaterProoF/BreathaBle 2.5-layer shell: durable/anti-abrasive outshell bonded with a 8,000/5,000 H2Xtreme® membrane and mesh lining. advantage: • excellent protection against the elements & surroundings is achieved while maintaining an extremely lightweight and comfortable shell. • keeps you comfortable and dry by keeping the moisture out and allowing your body vapour to escape and regulate your own internal temperature.

1

4-Way Way stretch oUtshell: W advantage: • Maximum manoeuvrability • v very quiet

2

WaterProoF PocKet: the chest pocket has been built into the jacket outshell and has a waterproof zipper. advantage: • waterproof zipper ensures that the pocket is completely impenetrable to the elements.

3

aDJUstaBle hem & cUFFs: laser cut tabs at the cuffs and a drawcord at the hem allow you to customize the fit of your jacket. advantage: • keeps the wind and rain / snow out of your jacket so that you can stay warm and dry

4

insiDe FUll length storm PlacKet: advantage: • keeps the wind and moisture from penetrating the zipper

5

aUDio-access Port: ort internal port allows ear-bud access from the inside of your jacket to the waterproof ort: chest pocket. advantage: • this ensures that your ipod stays dry and prevents earbud cords from hanging outside of your jacket and catching on things.

6

26

|

STORMTECH PERFORMANCE APPAREL

Manual Spring2010_V3.indd 26


perforMance fleece fleece provides excellent insulation but weighs a fraction of more expensive alternatives such as wool. in fact, even when wet fleece retains much of its insulative properties. this combined with the fact that it is extremely breathable makes it perfect for activewear. fleece is machine washable and if hung up dries very quickly (it should not be put in a dryer unless on tumble setting with no heat). for those that are allergic to wool fleece also provides an excellent option. fleece is a knitted fabric - which means that it is constructed of a series of looped yarns. over time these loops break down due to wear and washing. this causes a loop to break and form two single strands. these strands are what are eventually worn down and curled up to form pills on a fleece. pilling makes a fleece look tired and old - so we try to prevent that. anti-Pill Fleece: some companies will prevent pilling in the short term only - by laminating the fleece fabric with a coating that protects the loops. over time however this coating washes/wears off, and leaves the fleece exposed. storMtecH does not laminate its fleece. instead we take the fleece fabric directly from the mill, roll it out, and then comb the loops all up to the surface so that they are exposed. then we trim the tops of the loops to cut down the strands and minimize how much pilling could ever possibly occur on the garment. some fleeces are trimmed shorter (ie/ bwJ-3) and some are trimmed longer (ie/ sX-2). micro Fleece refers to the thickness of the yarn that is used to knit the fleece. in fact - not only are the yarns finer, but they are more closely compacted together. the result is a tighter fabric that has less space between the knit of the fabric. less space means less heat loss so the microfleece is warmer than regular fleece. finer yarn means that the fleece feels softer and smoother (also has a smoother, finer appearance). Bonded microfleece refers to two pieces of microfleece that have been bonded together - resulting in a new peice of fabric that is very dense and warm, yet quite light. recycled Fleece refers to fleece fabric that has been partially developed from recycled plastic bottles (ie. water, soda pop, etc). this fleece has the same look and feel of our regular anti-pill fleece, but is made of 30% recycled content. Polar Fleece refers to our heaviest fleece garments - which are any of those that are at least 300 g/m2. it is distinctive because it is so thick and fluffy. meryl速 actisystem Fleece refers to a patented fleece fabric specifically designed to provide maximum wicking properties - thereby making it an excellent alternative for either a base layer or a mid layer. CASUAL FLEECE

TECHNICAL FLEECE

Style BMF-1 GRF-1 GRF-2R

Style Bonded Microfleece Microfleece

SX-3 SX-2

Polar Microfleece

VX-2

3 LAYER BONDED

Meryl Fleece

Seam Sealed

Fabric WP/BR

BWJ-3

8/3

BWJ-2

8/3

F-2

3/3

ML-1 FZF-1

Stretch Fleece

STORMTECH PERFORMANCE APPAREL

Manual Spring2010_V3.indd 27

|

27

8/23/10 12:19:36 PM


perforM ance fleece

best

f-2m Denali Performance Fleecet • 3,000/3,000 • 270g/m2 (9.5 oz)

bwJ-3 Aurora Bonded Fleece Jacket • 8,000/3,000 • 300g/m2 (10.6 oz)

bwJ-2

Polaris H2X® Fleece Shell • 8,000/3,000 2 • 300g/m (10.6 oz)

better

new styLe

mL-1 Meryl® Fleece Jacket • 260g/m2 (9.2oz)

fZf-1 Tundra Stretch Fleece • 260g/m2 (7 oz)

bmf-1 Eclipse Fleece Shell • 306g/m2 (10.8 oz)

good

sx-2 Chinook Fleece Full-Zip Shell • 300g/m2 (10.6 oz)

8/23/10 12:20:04 PM


best perforMance fleece StorMteCh perforMaNCe fleeCe Performance fleece

before softshells became so popular storMtecH was producing a very unique type of fleece; a three-layer bonded fleece shell that consisted of the outer fleece fabric being bonded to an H2Xtreme membrane, which then had a polyester mesh liner bonded inside. The result was essentially a fleece jacket that was extremely water and wind resistant.

bWJ-3: bblack lack

bwj-3 | bwj-3w

black lack

bonded fleece jacket

now consider how a bX-2 would look if you turned it inside out - and compare that to the bwJ-3.

BWJ-3 h2X® BonDeD Fleece JacKet

bWJ-3W: Navy

aurora

PerformanCe featureS: Mid length front & back Yokes Curved Into raglan armhole elbow Seaming and Inside Storm placket Zipper Garage on chest & Side pockets Contrast frame front panel lining elastic Cuffs adjustable hem Drawcord Inside back Neck patch Shell: 100% polyester Micro fleece bonded with Waterproof Membrane and polyester Mesh, 300g/m (CDN)/10.6oz. (USa) SizeS: (m’S) S-3xl ; (W’S) xS-2xl ColourS: black, Coffee, Navy.

Inside Storm placket

Navy lower pockets with frame and Garage Coffee

elastic Cuff

elbow Seaming

87

Page 87 of the Fall 2010 Page 87 of the Fall 2010 international catalogue

The BWJ-3 is a microfleece that has been bonded to an H2Xtreme membrane to produce a jacket-like product. Typically fleece is thought of as a mid layer - or the insulative layer - but the BWJ-3 can actually used as an outerlayer as well.

• 3 Layer Bonded Fleece • 8,000 mm waterproof fabric • 3,000 mm breathable Key Features:

1

2 3

4

W Water ProoF/BreathaBle 3-layer shell: lightweight/w ightweight/ arm microfleece outshell bonded with ightweight/w a 8,000/3,000 H2Xtreme® membrane and an inside mesh lining advantage: • ensures that you’ll stay dry if you get caught in a sudden rain shower • Helps protect your body from the wind ZiPPer garage: The Zipper parks underneath a soft fleece pocket at the top of the neck. advantage: • keeps the cold metal of the zipper from contacting your neck directly. aDJUstaBle hem & elastic cUFFs: a drawcord at the hem allows you to customize the fit of your jacket. elastic cuffs ensure that the sleeves contour to your wrist advantage: • keeps the wind, rain, and snow out of your jacket so that you can stay warm & dry. • keeps warm air tracked around your body inside the fleece to provide insulation DraFt FlaP: inner flap lies under the zipper advantage: • protects your body from any wind or moisture might enter through the zipper • because the flap is inside the jacket has a cleaner visual design.

STORMTECH PERFORMANCE APPAREL

|

29


better perforMance fleece perfor ml-1 meryl® Fleece PUlloVer • 260g/m2 ; 9.2 oz • 93% Meryl® Actisystem™ Fleece / 7% Spandex • Quarter Zip

page 91 of the fall 2010 international catalogue

Key Features:

1

2

3 4

30

|

anti-Pill WicKing Fleece: a smooth outer face combined with a light and fluffy inner face. advantage: • smooth outer surface makes this fleece unique in that it can be silk screened or have a heat transfer applied. • smooth surface also ensures this fleece stays looking great longer than typical fleece • unique actisystem™ technology is designed to wick moisture away from your body to keep you dry and comfortable high stretch content: content this fleece hugs your body like a base layer. advantage: • a snug fit keeps this moisture wicking fabric close to your skin and maximizes its ability to keep you dry and comfortable. this allows the garment to be a base layer and insulative mid layer all in one aDJUstaBle hem: a drawcord at the hem allow you to customize the fit of the fleece. advantage: • prevents any draft from going up the garment, and traps warm air around your body ¼ ZiP necK: advantage: • provides rapid release of warm air trapped inside the fleece when you need to cool down fast.

STORMTECH PERFORMANCE APPAREL

Manual Spring2010_V3.indd 30


good perforMance ance fleece sX-2

chinooK Fleece FUll-ZiP shell

• 300g/m2 ; 10.6 oz • 100% Polyester Polar Fleece • Full Zip

page 98 of the fall 2010 international catalogue

Key Features:

1

anti-Pill recycleD Fleece: a lightweight fleece made partially of recycled plastic drink bottles. advantage: • anti pill fleece will stay looking great longer than regular fleece from other suppliers • recycled content allows each of us to do our part protecting the environment

2

Flat locK stitching: inside seams are stitched down. advantage: • flat lock stitches are less obtrusive and more comfortable against your body

3

aDJUstaBle hem: a drawcord at the hem allow you to customize the fit of the fleece. advantage: • prevents any draft from going up the garment, and traps warm air around your body

STORMTECH PERFORMANCE APPAREL

Manual Spring2010_V3.indd 31

|

31


STORMTECH only uses cooLMAX® Extreme – in order to provide the most cooLMAX® Extreme technology in our garments. Air Flow

Evaporative Cooling System

Moisture being Wicked away

Close up of three Channel Fiber

Performance

TECHNICAL PoLos/BA L Los/BA sE LAYERs

cooLMAX® Extreme is the original non-chemically treated performance fabric that has helped top athletes push harder and longer for years. Now, however, cooLMAX® Extreme is being discovered for the cool comfort that it brings to everyday apparel.

Body Perspiration Vapour

Coolmax® EXTREME Coolmax® Active Coolmax Everyday ®

25%

50%

85%

100%

Coolmax Fiber Content

Three levels of cooLMAX® Extreme fabric are available – based upon their percentage of cooLMAX® Extreme fiber content. Check the label – if it’s not made from cooLMAX® Extreme, it’s not a STORMTECH garment.

Invisible Freshness Bacteria Shield

Wicking Moisture

Skin

Fresh Air Free From Bacteria

Fabic

cooLMAX® Extreme freshFX uses silver-based technology to protect fabrics from odour-causing bacteria for the standard life of your garments.

Manual Spring2010_V3.indd 32

8/23/10 12:21:00 PM


Exclusive STORMTECH Dry-Tech double layer fabric uses capillary action to wick moisture away form your skin and up to the surface of the fabric.

Top Layer

Body Vapour

Close up of X-Shaped Filament

Filament Layer

Because Dry-Tech fabrics are made of our X-Shaped yarn, the fabric has an extremely large surface area for moisture to spread out over. The result is a super quick dry fabric.

erc

d

le

lc

s Stt

u yd ro t

ch c

r m ttee oo

Dry-Tech Styles are also available in a 50% recycled content fabric

y h r e cr

Dry-Tech’s light weight & smooth hand feel make it perfect for silk screening or heat transfer. However please note that heat transfers should not exceed 150°C/300°F

Manual Spring2010_V3.indd 33

8/23/10 12:21:13 PM


perforM ance poloS

best

Invisible Freshness Shield

Bacteria

Fresh Air Free From Bacteria

new CoLouR

Gfx-2 Coolmax® fresh FX Popcorn Polo • Coolmax® Extreme Fresh FX

Wicking Moisture

Skin

Fabic

better Air Flow

Evaporative Cooling System

Moisture being Wicked away

Gpx-2 Coolmax® Extreme 2 Tone Polo • Coolmax® Extreme

Close up of three Channel Fiber

Body Perspiration Vapour

good

Top Layer

dtx-1 Dry-Tech S/S Sport Polo

• Dry-Tech Quick-Dry

Manual Spring2010_V3.indd 34

sat053 Dry-Tech Team Polo

Body Vapour

Close up of X-Shaped Filament

Filament Layer

• Dry-Tech Quick-Dry

8/23/10 12:21:49 PM


ath letic S uitS

best saJ200

dtJ-001

sap200

dtp-001

Dry-Tech Full-Zip Training Jacket • Dry-Tech Quick-Dry

Dry-Tech Track Jacket • Dry-Tech Quick-Dry

Dry-Tech Full-Zip Training Pant • Dry-Tech Quick-Dry

Dry-Tech Track Pant • Dry-Tech Quick-Dry

better saJ400

ts-1

Epic Athletic Jacket • Polyester Twill

Blaze Track Jacket • Polyester Mesh Lining

new styLe

stxp-1

stxp-1

Blaze Athletic Twill Pant • Polyester Micro Twill

Blaze Athletic Twill Pant • Polyester Micro Twill

bAse

sat120

Dry-Tech Selected Jersey • Dry-Tech Quick Dry Polyester

sat100

L AY e r s

Dry-Tech Club Jersey • Dry-Tech Quick Dry Polyester

sat036

Dry-Tech L/S Layering Tee • Dry-Tech Quick Dry Polyester

sat035

Dry-Tech S/S Layering Tee • Dry-Tech Quick Dry Polyester

8/23/10 12:22:37 PM


StorMtech perforMance technologY is tHe result of countless Hours of researcH, design, & testing by our product developMent teaM and atHletes. storMtecH’s fall 2010 collection blends tecHnical & functional durability witH urban styling.

W AT E R P R O O F B R E AT H A B L E

h2X® FABricS hAve A MicroporouS coATing AppLieD To The unDerSiDe ThAT proviDeS A perMAnenT wATerprooF/ BreAThABLe BArrier oF up To 5,000 MM. GARMENTS MADE WITH h2X® FABricS ThAT hAve Been SeAM SeALeD Are coMpLeTeLy wATerprooF.

h2X® STreTch FABricS conTAin SpAnDeX To proviDe MAXiMuM MANEUVERABILITy, WHILE ALSO hAving wATerprooF/BreAThABLe BArrierS AppLieD The unDerSiDe. BecAuSe oF The STreTch oF The FABric TheSe STyLeS hAve noT hAD Their SeAMS TApeD.

R

EP

EL

h2XTreMe™ FABricS hAve A Micro-porouS MeMBrAne BonDeD To The unDerSiDe ThAT proviDeS A perMAnenT wATerprooF/ BreAThABLe BArrier oF AT LeAST 5,000 MM. GARMENTS MADE WITH h2XTreMe FABricS ThAT hAve Been SeAM SeALeD Are coMpLeTeLy wATerprooF.

SEALED SEAMS

D / W / R

DuPont™ fabric protector

SeALeD SeAMS Are eSSenTiAL ASPECTS OF A GARMENT’S conSTrucTion. To enSure ABSoLuTe wATerprooFneSS our proDucTS reLy on STorMTech SeAM SeALing TechnoLogy.

STorMTech D/w/r TechnoLogy proviDeS eFFecTive AnD hArD weAring wATer reSiSTAnT/ BreAThABLe proTecTion oF AT LeAST 600 MM

TeFLon® winD/wATer repeLLenT TechnoLogy proviDeS Long LASTing proTecTion AgAinST THE ELEMENTS AS WELL AS OIL & WATER-BASED STAINS, DUST, AND Dry SoiL. The reSuLT iS A gArMenT ThAT LookS newer Longer AnD iS eASier To cAre For.

STorMTech Dry-Tech FABricS proviDe powerFuL MechAnicAL MoiSTure MAnAgeMenT By uSing Fine FiLAMenTS To wick MoiSTure AwAy FroM The Skin.

gArMenTS LABeLeD AS cooLMAX® EXTREME ARE REQUIRED TO BE MADE FROM 100% COOLMAX MECHANICAL MoiSTure MAnAgeMenT FABric.

cooLMAX® eXTreMe FreShFX oFFerS eXTreMe MechAnicAL MoiSTure MAnAgeMenT coMBineD wiTh proTecTion AgAinST oDor-cAuSing BAcTeriA.

MeryL® AcTiSySTeM™ iS A high perForMAnce FiBer SySTeM ThAT proviDeS eXceLLenT wicking AnD Drying properTieS.

STORMTECH USES A 70/30 DOWNFeATher BLenD To proviDe opTiMAL wArMTh SpreAD ThroughouT The gArMenT.

eRc

Lc Dl e d

s StT

U yd rO t

ChH c

MtTe rRm E oO

y hWrO e cR

The SAMe greAT MechAnicAL MoiSTure MAnAgeMenT TechnoLogy OF DRy-TECH, BUT MADE FROM recycLeD MATeriALS.

www.stormtech.eu

8/23/10 12:22:43 PM


Stormtech Q&A  

Lär dig mer om Stormtechs jackor

Read more
Read more
Similar to
Popular now
Just for you