Page 1

One nation. United by sport.

Work hard. Play harder.

Grand Slam Sports Equipment


Introduction

Grand Slam Sports Equipment Freecall 1800 773 461

See more at www.grand-slam.com.au

About Grand Slam

Head Office

Twelve-month warranty

19 Deakin Street Brendale QLD 4500 PO Box 5579 Brendale MSC QLD 4500 Telephone: (07) 3205 3388 Facsimile: (07) 3205 3522 Freecall: 1800 773 461 Email: sales@grand-slam.com.au Web: www.grand-slam.com.au

Grand Slam Sports Equipment warrants that products manufactured or supplied by our company are free of defects in materials and workmanship. Products thought to be defective must be returned to the factory at the purchaser’s cost for final determination. The company will repair or replace product(s) if defective. Grand Slam Sports Equipment does not warrant its products against normal wear, abuse, vandalism, over-tensioning, or lack of general maintenance, etc.

At Grand Slam we have one very simple goal: to be the best at what we do. We strive to provide the best sporting equipment, the best service and the best value. Grand Slam’s sports equipment is engineered for strength and reliability. Our outdoor equipment is designed for even the most extreme conditions, and can be supplied for wind areas rating from W33 to W50. Our indoor equipment is also designed and built to meet the most rigourous safety and quality standards.

Trading terms Conditions of sale

Wherever possible we manufacture our products from long-lasting, highly durable galvanised steel, which is (where stated) powder-coated in high grade polyester to give years of maintenance-free use. Products that are manufactured from standard grade steel for outdoor use are, wherever possible, hot-dipped galvanised after fabrication. These products can also be powder-coated or painted if desired to suit your needs.

Design and planning Grand Slam liaise with engineers, architects and builders to ensure the proper selection of equipment. Grand Slam also offer our professional services to design the most cost-effective and efficient sporting equipment for your facility. When architectural drawings are supplied, Grand Slam can provide a computer design service, setting out in detail, court layouts, fixing points and correct positioning of equipment.

Installation and service Grand Slam equipment can be installed by qualified personnel, but we recommend that our experienced fitters either oversee or install our equipment to ensure that the correct operation and safety standards are met. Our installation service is available across Australia and overseas.

Assistance Contact Grand Slam Head Office on 1800 773 461 (for interstate or country callers) or call (07) 3205 3388. International callers should dial + 61 7 3205 3388. Or contact your local Grand Slam agent.

1. All products and prices are ex-works, Brisbane, Queensland. 2. Delivery is ex-stock, where possible. 3. Terms: (i) Cheque, direct deposit, or cash with order, unless approved account. Credit card facilities available. A deposit is required on non-stock items. (ii) Monthly account: 30 day end of month terms. 4. Claims must be made within 7 days of receipt of goods. 5. Prices listed are current at the date of publication and are subject to change without notice.

Note: A twelve-month warranty applies to selected indoor equipment. Contact Grand Slam Sports Equipment for further information. Note: Winding mechanisms on products must be lubricated frequently to prevent seizure of mechanism (refer to warranty above). Polished brass fittings may be affected by discolouration in coastal areas due to the high salt content and this warranty does not cover this.

Retention of title

Catalogue cover

The Purchaser agrees that the title in the goods will remain with Grand Slam Sports Equipment until payment in full for the goods has been received. Provided that payment shall not be deemed to be made until any cheque in payment has been duly honoured. The parties agree that should payment for these goods not be made on the due date for payment, Grand Slam Sports Equipment may, without notice, enter any premises where the goods may be held, by force if necessary, with such means as may be necessary, and remove all of the goods of Grand Slam Sports Equipment in respect of which title has not passed to the Purchaser, and may take such action as is necessary to gain access to the premises for the purposes of removing such goods. Such action is hereby authorised by the Purchaser.

Images: www.iStockphoto.com


Contents

Abbreviations D DL FMS G ID kg LL m mm NB Ă˜ OD PVC RHS RMS SHS ZP

Sports

Diameter Dead load Flat mild steel Galvanised Internal diameter kilograms Live load metres millimetres Nominal bore Diameter Outside diameter Poly-vinyl chloride Rectangular hollow section Round mild steel Square hollow section Zinc plated

Athletics Track and field

2

Australian Rules

4

Badminton and other indoor games

5

Basketball Indoor

6

Basketball Outdoor

11

Basketball Practice towers

14

Basketball Backboards, rings and nets 16

Dimensions are given in metric measures.

Symbols KIT

Signifies that the product is supplied in kit form for ease of transportation and assembly. All components and fixings are included. GSI

Grand Slam recommend installation by qualified personnel.

Cricket

18

Hockey

19

Multi-use games equipment

20

Netball Indoor

22

Netball Outdoor

23

Rugby

24

Soccer

28

Tennis Posts

30

Tennis Accessories

32

Tennis Court cleaning

34

Tennis Nets and winders

35

Volleyball Indoor

36

Volleyball Outdoor

39

Court curtains

40

Line markers

42

Multi-use goals

43

Nets

44

Protective padding

46

Racks and trolleys

50

Scoreboards

52

Sleeves and caps

54

Winches

57

Glossary Hot-dipped galvanised A highly durable zinc coating which is applied under extreme heat to unprotected steel. Supergal/Allgal Supergal/Allgal is a cold-formed product made from highly durable pre-galvanised steel strip. Powder-coated A highly durable polyester coating which is applied electro-statically in a cold powder form then oven-baked at 195°C for maximum adhesion.

Accessories

GRAND SLAM SPORTS EQUIPMENT 1


Athletics: Track and field

HAMTROL 1

JUDST 10

MPTDS

STARTBLOCK 1

JUDST 10

JAVTROL 16

STARTBLOCK 1

JUDROST 1

Judges stand (10 seat)

Javelin trolley

Starting block caddy

Judges rostrum (mobile)

Seats ten judges. Heavy duty RHS design, fully welded using galvanised steel. Five large non-slip steel grate steps. Supplied with a stationary base or can be supplied with swivelling pneumatic wheels — making the stand easily transportable.

Sturdy lightweight trolley holds sixteen javelins. Easy to manoeuvre. Ideal for storing and protecting valuable javelins when not in use.

Securely holds and protects up to ten starting blocks while being transported. Heavy duty robust design. Made from lightweight tubular galvanised steel. Comes complete with heavy duty pneumatic wheels that can support up to 170kg. A sturdy handle allows for easy manoeuvreability. Suitable for clubs and schools.

Two step, wheel-away design with non-slip floor. Made from galvanised steel. Can be powder-coated at an extra cost.

JAVTROL 24

Javelin trolley As above, but holds 24 javelins.

JUDST 16

Judges stand (16 seat)

JAVSTAND 30

As above, but seats sixteen judges.

Javelin stand

WINROST 1

Winners rostrum Step-up stand presents first, second and third place-getters. Supplied in galvanised form. Can be powdercoated at an extra cost. HAMTROL 1

Hammer trolley Mobile hammer trolley, heavy duty design, can transport up to fourteen hammers at one time. Ideal for clubs and schools.

Holds up to 30 javelins. Protects javelins when not in use. Can be wall mounted for additional security. Designed for clubs and schools. MPTDS

Multi-purpose equipment trolley with drop sides Designed to carry a variety of sports and associated equipment. Comes complete with lockable drop sides, pneumatic tyres and a towbar attachment for coupling to a small tractor or ride-on mower. Ideal for schools and clubs.

2 GRAND SLAM SPORTS EQUIPMENT

JAVTROL 16


Athletics: Track and field

PORTDISC

MPC KF

KIT

KIT

PORTDISC

KIT

SPC 1

KIT

SPC 2

KIT

SPC 1

Shot put cage

Mobile discus cage used for discus and other sports. Supplied in easy to assemble kit form. Poles are made from 25mm NB galvanised pipe; all support plates are galvanised for long life. Netting is 14000mm long x 3000mm high and is manufactured from 45mm square x 2mm diameter UV-stabilised polyethylene. Ideal for schools and clubs.

IAAF standard professional cage, 5000mm high, seven panels of netting each 2740mm wide; 6000mm mouth positioned 4200mm in front of the centre of the throwing circle. Posts are made from 60mm heavy duty pipe, bent at the top. Mesh is UV-stabilised 25mm square x 72 ply polyethylene. Ideal for clubs and schools. SPC 2

MPC KF

KIT

Multi-purpose cage This cage is designed for various games including baseball, discus and shot put. The size of each of the three panels is approximately 3000mm high x 3000mm wide. Supplied in kit form with all support plates, 25mm NB framing, 45mm square x 2mm polyethylene mesh and tie rope. Ideal for schools and clubs.

JUDROST 1

Highly durable powder-coated finish. Ideal for clubs and schools.

KIT

Portable discus cage

Custom-built cages Grand Slam can manufacture other types of discus and hammer throw cages on request. Call Grand Slam for more information.

KIT

Deluxe shot put/discus cage Six panels of netting, each 5000mm high, 3170mm apart; 6000mm mouth positioned 4200mm in front of the centre of the throwing circle. Posts are made from HD 75mm x 50mm x 2mm galvanised RHS, angled at the top. Rope pulley blocks are attached at the top of each post so that the net can be easily hoisted into playing position. Jamming cleats are located approximately 2000mm up from the base of posts to lock ropes in position. Supplied with 45mm square x 3mm thick UV-stabilised polyethylene net.

GRAND SLAM SPORTS EQUIPMENT 3


Australian Rules

ARG103

See also Reference guide: Rugby and Aussie Rules padding on page 24.

KIT

Measurements

ARG102

Measurements are from ground level.

Powder-coated Steel Australian Rules goals: 7000mm/5000mm

Steel goals

Set of four 75mm OD goal posts and four 60mm OD behind posts. Made from lightweight high-tensile galvanised steel, powder-coated white. Ground sleeves and construction cages included. Matching goal pads: GPP13 x 8 or GPP16 x 8.

Galvanised steel goals are best suited to situations where they are exposed to rough play or potential vandalism.

Aluminium goals Aluminium goals are the best choice for multi-play fields where goals need to be removed from time to time to accommodate other sports.

Protective padding Padding is available in a range of sizes (see Protective padding, page 46). ARG101

KIT

Powder-coated Steel Australian Rules goals: 5000mm/2800mm Budget Australian Rules goals. Set of four 60mm OD goal posts and four 50mm OD behind posts. Lightweight galvanised steel, powder-coated white. Ground sleeves included. Construction cages are a recommended optional extra. Matching goal pads: GPP13 x 8.

ARG103

KIT

KIT

Powder-coated Steel Australian Rules goals: 9000mm/5750mm Set of eight heavy duty galvanised steel posts powder-coated white. Goal posts taper from 90mm OD to 75mm OD. Behind posts are 75mm OD. Ground sleeves and construction cages included. Matching goal pads: GPP16 x 4 and GPP16B x 4. ARG104

KIT

Powder-coated Steel Australian Rules goals: 11000mm/6500mm Set of eight heavy duty galvanised steel posts, powder-coated white. Goal posts taper from 114mm OD

4 GRAND SLAM SPORTS EQUIPMENT

to 89mm OD. Behind posts are 89mm OD. Ground sleeves and construction cages included. Suitable for W41,N4 wind areas. Also available for W50,N5 wind areas at an extra cost. Matching goal pads: GPP16B x 8. ARG103 AL

KIT

Aluminium Australian Rules goals: 9000mm/6000mm Set of eight professional tapered heavy duty aluminium posts, powder-coated white. Goal posts taper from 112mm OD to 70mm OD. Behind posts taper from 80mm OD to 50mm OD. Ground sleeves and construction cages are included. Matching pads: GPP16B x 8.

ARG105 AL

KIT

Aluminium Australian Rules goals: 12000mm/9000mm Set of eight heavy duty aluminium posts, powder-coated white. Goal posts taper from 127mm OD to 80mm OD. Behind posts taper from 112mm OD to 70mm OD. Ground sleeves included. Construction cages extra if required. Engineer’s certification available at extra cost. Matching goal pads: GPP16B x 4 and GPP16C x 4. Note: Grand Slam can make Australian Rules goals up to 15 metres high. Please phone 1800 773 461 for more information.

Reference guide: Ground sleeves and cages CODE

DESCRIPTION

ARGGS101

Set of eight sleeves: 500mm long. Suits ARG101.

ARGGS102

Set of eight sleeves: 720mm long. Suits ARG102.

ARGGS103

Set of eight sleeves: 750mm long. Suits ARG103.

BBGSC

Cages to suit ground sleeves Suits ARG101, ARG102, ARG103.


Badminton and other indoor games See also Protective padding on page 46.

TNP-IDFS

BNT105

BNT102T

BNT106T

TNP-IDTB

BNT103

BNT104 INT

BNT102T

BNT104 INT

Adjustable height T-base badminton/volleyball posts

Free-standing international badminton posts (weighted base)

Badminton/volleyball post with double hooks

An adjustable upright made from 40mm x 2mm SHS slides over a 35mm x 2mm SHS internal upright. A locking knob holds the adjustable slide at the nominated playing height. T-base is made from 50mm x 6mm FMS and is gusseted to the main upright by 12mm RMS. A locking device under the T-base locks into a keyhole floor plate. Urethane pads on the T-base protect floors from damage.

Upright is fixed to weighted base by a diagonal brace (base does not protrude onto playing area). Post is set at 1550mm. The net cord passes over a grooved cap and is fixed by a jamming cleat on the other side of the post. The cord on the tie post is also fixed by a jamming cleat. Urethane pads protect floor from damage.

Similar to BNT102T, but this post has hooks on both sides to support nets for two courts.

KIT

BNT106T

TNP-IDFS BNT2212

Indoor tennis posts

Badminton competition net

As per TNP-IDTB, but posts slide into IS100, IS110 or IS120 floor sockets (sleeves extra).

Nylon net. Suits all badminton posts. TNP-IDTB

Indoor tennis posts Note: Special non-marking rubber wheels make this system portable.

FP120 (not included). Made from 60mm OD heavy wall galvanised pipe, powder-coated after fabrication. Complete with net winder (model NWB2) and urethane floor pads.

Note: Nets shown are for illustration only. Nets must be ordered separately.

Posts lock into keyhole floor plate

BNT103

Free-standing badminton post

BNT105

Reference guide: Badminton post padding

Upright is secured by a diagonal brace fixed to a weighted base. Post is set at international height: 1550mm. Net cord passes over a grooved cap and is fixed by a jamming cleat on the other side of the post. The cord on tie post is secured to a hook. Urethane pads protect floors from damage.

Adjustable badminton/volleyball posts (floor socket)

CODE

Note: Special non-marking rubber wheels make this system portable.

Same as BNT102T but fits floor sockets IS100, IS110 or IS120. BNT105D

Adjustable badminton/volleyball post with double hooks Same as BNT 105, but this post has hooks on both sides to support nets for two courts.

GPP24

DESCRIPTION

Indoor tennis post padding: One-piece Suits model TNP-IDFS.

GPP25B

Badminton padding: Two-piece Suits models BNT102T, BNT103 and BNT104 INT.

GPP26B GPP27B

Suits model BNT105 only. Badminton padding: Two-piece Suits model BNT105D only.

GRAND SLAM SPORTS EQUIPMENT 5


Basketball: Indoor

See also Protective padding on page 46 and Winches on page 57.

Play harder with Grand Grand Slam has been established for over 25 years and in that time have fitted out over 2,000 sports halls and stadiums.

All of Grand Slam’s indoor and outdoor basketball systems comply to all Australian and international standards, are Australian designed and made, and are engineer certified.

Grand Slam basketball systems have been load tested to withstand 250,000 cycles of up and down movement — with a 240kg weight attached to the backboard when load testing!

Grand Slam’s armour-plate glass backboards are unique, as all line marking is heat-etched onto the backboard — giving a lifetime finish.

All indoor models are made from galvanised steel then powder-coated in-house for a durable, long-lasting finish. Grand Slam’s professional, trained installers use fully load-rated turnbuckles, dee-shackles and pulley blocks when installing their quality products.

All ceiling mounted basketball systems are fully adjustable. This allows them to be set at the exact playing height required.

This symbol signifies that the product is supplied in kit form for transportation. All components and fixings are included in the kit.

Backboards are also fully adjustable for exact vertical alignment when setting up.

Grand Slam recommend installation by qualified Grand Slam personnel.

KIT

GSI

Indoor basketball support beams All indoor basketball systems require support beams which should be considered during the design phase. Beams can be fitted to run parallel to the face of the backboard (‘Beam’ system) or perpendicular the face of the backboard (‘Rail’ system).

The following Reference guide: Indoor basketball support beams applies to all indoor basketball systems including: BB1003, BB1004, BB1005 Stadia system, BB1006 Stadia system, BB1010, BB1020, BB1022 and BB1024. All of these systems are engineer certified.

Please consult Grand Slam for technical information regarding recommended basketball beam sizes and placement. Grand Slam can also design and install the appropriate support beams if required.

Basketball support beams are also engineer certified and, if supplied and installed by Grand Slam, an engineer certificate will be issued on completion of the project.

BB1003

BB1003

GSI

GSI

Reference guide: Indoor basketball support beams CODE

M A X S PA N B E W E E N P O R TA L F R A M E S

B E A M S P E C I F I C AT I O N

BBR-100-04

4000mm

100mm x 4mm SHS 350 LO

BBR-100-05

5000mm

100mm x 5mm SHS 350 LO

BBR-100-06

6000mm

100mm x 6mm SHS 350 LO

BBR-125-04

7000mm

125mm x 4mm SHS 350 LO

BBR-125-05

8000mm

125mm x 5mm SHS 350 LO

BBR-150-05

9000mm

150mm x 5mm SHS 350 LO

BBR-150-06

10 000mm

150mm x 6mm SHS 350 LO

BB1004

GSI

BB1004

GSI

Forward-hinged basketball system: Beam system

Forward-hinged basketball system: Rail system

Backward-hinged basketball system: Beam system

Backward-hinged basketball system: Rail system

Shown with height adjustable frame.

Shown with standard frame.

Shown with height adjustable frame.

Shown with standard frame.

6 GRAND SLAM SPORTS EQUIPMENT


Slam Sports Equipment

Full size 1800 x 1050mm BB810, BB840, BB900

Full size 1800 x 1050mm BB910 Armour-plate glass

Indoor backboards

Adjustable backboard frames

All indoor basketball systems can be supplied with a variety of backboards including: BB810, BB840, or BB910. BB1026 height adjustable backboard system comes standard with BB810 backboard, but can be fitted with a BB840 backboard at an extra cost. BB1028 height adjustable backboard system is supplied with a BB910 armour-plate glass backboard only.

BB900

BB1026

Full size HMR pineboard backboard, ring and net

Adjustable backboard frame

Basketball backboard made from 1800 x 1050 x 18mm white HMR pineboard with 50mm wide black international markings. Complete with heavy duty BB821, 20mm double-strutted ring, net hooks, four bolt fixings and a Grand Slam model BTB 065W net.

BB810

BB910

Full size HMR melamine

Full size Armour-plate glass backboard, ring and net

For indoor use only. Backboard is made from 1800 x 1050 x 18mm white melamine HMR compressed pineboard. This backboard is designed for indoor competition use and must be supported by a full steel frame. Ring must be bolted through to backboard framework. Ideal for indoor retractable and side-swing basketball models. BB840

Full size plywood backboard Official size 1800 x 1050 x 17mm. Backboard is made from highly durable exterior grade formply and is plasticcoated with four coats of all weather industrial satin-finish oil-based paint. This backboard is extremely strong and will give years of use with minimal maintenance. Ideal for both outdoor and indoor applications. Boards are supplied undrilled unless ordered with a Grand Slam basketball system.

GSI

Glass backboards are commonly used instead of timber backboards at venues where spectators are positioned behind playing areas. This model features full size 12mm thick armour-plate glass supported by a 50mm x 50mm SHS frame. Glass is siliconed directly to frame and is cushioned from bottom frame support with closed cell foam. Corner aluminium supports screwed to the main frame act as extra security and hold the glass snugly in place. Outer frame is powder-coated white. Grand Slam’s unique heat-curing method bakes lines on permanently, so there is no need to ever replace lines. Glass is also cut out around the ring area to avoid contact and possible breakage. Heavy duty steel ring bracket support. Supplied with model BB827 Super durable stadium springloaded ring.

GSI

Must be ordered during initial order of basketball structure. This frame can be installed to the BB900 backboard system during manufacture. Ring can be set from 3050mm to 2600mm for junior play. A gas strut system assists raising and lowering of the backboard frame. Frame runs on two vertical slides with built-in nylon rollers. Suits BB1003, BB1004, BB1005, BB1006, BB1010, BB1012, BB1018, BB1020, BB1022 and BB1024. BB1028

GSI

Adjustable backboard frame: for Armour-plate glass Must be ordered during initial order of basketball structure. Ring can be set from 3050mm down to 2600mm for junior play. A double gas strut system assists raising and lowering of the board frame. Frame runs on two vertical slides with built-in nylon rollers. Suits BB1003, BB1004, BB1005, BB1006, BB1010, BB1012, BB1018, BB1020, BB1022 and BB1024.

BB1026

GSI

in down position

BB1028

GSI

with BB930 padding

BB930

Stadia backboard padding Stadia professional polyurethane moulded backboard padding (screw on, two piece). Suits most full sized backboard frames. Available in black only.

GRAND SLAM SPORTS EQUIPMENT 7


Basketball: Indoor systems BB1005

GSI

BB1005

with BB930 Stadia padding

GSI

in stored position

8 GRAND SLAM SPORTS EQUIPMENT


Basketball: Indoor systems BB1003

BB1003

BB1004

GSI

BB1004

GSI

GSI

GSI

Forward-hinged basketball system

Backward-hinged basketball system

Improved engineer-certified model. This system can be installed in sports halls with a ceiling height ranging up to a maximum of 9 metres (above 9 metres, see BB1005 and BB1006). Fully adjustable SHS backboard frame complete with BB900 backboard, BB829 heavy duty 20mm ring and net. Backboard system is supported by diagonally braced arms made from 75mm x 50mm RHS. Supplied with fully adjustable pivot arm fixtures that are mounted to support beams. All winching cables, pulley blocks, fixtures and fittings included. Winch not included. Please refer to Winches for the type of winch required. Picture shown with BB1026 height adjustable frame (optional extra). See BB1026.

Improved engineer-certified model. Similar to BB1003, but this system hinges backward not forwards. Winch not included. Please refer to Winches for the type of winch required. BB1005

GSI

Stadia system: Full size forward-hinged, long reach basketball system Improved engineer-certified model. State of the art heavy duty truss design. This system can be installed in sports halls with a ceiling height ranging up to a maximum of 11 metres. Ideal for large stadiums that require a heavy duty long reach basketball system. Backboard is BB910 Armourplate glass with BB827 heavy duty

Reference guide: Indoor basketball systems CODE

See also Protective padding on page 46 and Winches on page 57.

BB1005

BB1024

GSI

spring-loaded basketball ring and net. Truss design is manufactured from heavy duty 50mm x 50mm SHS. Supplied with fully adjustable pivot arm fixtures that mount to support beams. Can be supplied with specially designed Stadia cable winching system which lifts all cable supports out of sight when not in use. All winching cables, pulley blocks, fittings and fixtures included. Winch not included. Please refer to Winches for the type of winch required. BB1006

GSI

Stadia system: Full size backward-hinged, long reach basketball system Improved engineer-certified model. Same features as per BB1005, but this model is backward-hinged.

BB1010

BB1010

GSI

with BB1026

GSI

Lift-up basketball system Wall frame supports 40mm SHS diagonally braced hinged arms which are connected to BB900 backboard. The structure is supported in the playing position by 5mm steel cables. Cables are connected to a structural member directly above the wall frame and to each corner of the board frame. All hinged arms have steel sleeves inserted through pivot areas for years of trouble-free use. Model may be winched vertically into the storage position. Winch not included. Refer to Winches for the type of winch required. BB1012

GSI

Fixed basketball system Similar features to BB1010 but this structure is fixed to wall supports. Maximum set out from wall is 1200mm.

GSI

TYPE OF STRUCTURE

Indoor basketball backboard systems BB900

Full size HMR pineboard backboard, ring and net

BB910

Full size Armour-plate glass backboard, ring and net

Ceiling-mounted basketball systems BB1003

Forward-hinged system

BB1004

Backward-hinged system

BB1005

Stadia system: Forward-hinged

BB1006

Stadia system: Backward-hinged

Wall-mounted basketball systems BB1010

Lift-up system; cable support

BB1012

Fixed system

BB1018

Side-swing system with brace support

BB1020

Side-swing system with cable support

BB1022

Side-swing system with cable support

BB1024

Side-swing system with cable support

GRAND SLAM SPORTS EQUIPMENT 9


Basketball: Indoor systems

Winches See also Winches on page 57. W24, W24-PWDA, W26

W24

Portable electric winch driver

BB1018

Ideal for operation of several winches in the one complex. Fast, efficient operation. 750 watt with forward and reverse switch.

GSI

W30-70

Heavy duty, key operated, sensor controlled brake winch This compact unit is ideal for swing away basketball systems and vertical lift curtains: 0.55kw/240v; 300kg lifting capacity. Motor operates gear reduction unit. Sensor controls operate movement of structure to exacting requirements. All electric switch gear and wiring included. Drum holds approximately 30 metres of 6mm cable. Key can be removed from control box when not in use. Winch unit comes complete in solid powdercoated steel box and only requires a 240v x 10 amp power outlet for operation. W27

Remote control Supplied with BB900 backboard and 40mm SHS frame.

BB1020

BB1018

Similar to BB1010, but this model swings sideways. System locks in the play or storage position with a telescopic brace mounted diagonally across the top or bottom of the structure. Tool supplied for locking backboard in position.

GSI

Side-swing, diagonal brace basketball system Similar mounting details as BB1010 but this system swings sideways into the storage position. The BB900 backboard frame is supported by two torsion bars mounted diagonally on each side of the structure. The torsion bars take the place of support cables. This system is locked in either the playing or storage position with a telescopic brace mounted diagonally across the bottom or top of the structure. Tool supplied for locking backboard in position. Note: This system can only be installed if the wall fixings are strong enough to take the forces involved during play.

BB1012

GSI

Side-swing, cable-support (dual support)

BB1022

GSI

Side-swing, cable-support (bottom support) Similar to BB1020, but this model is supported from the bottom by pivot arms. BB1024

GSI

Side-swing, cable-support (top support)

W24-PWDA

Portable winch driver attachment Used in conjunction with W24 driver to operate W26 winch. W26

Heavy duty, worm-drive winch Gear ratio 25:1. Approximately 300kg safe working load. Cable drum holds approximately 14 metres of 5mm diameter steel cable. Winch is fitted with special pinned shaft to take W24-PWDA portable winch driver attachment. Worm-drive winches are self-locking and provide a much greater level of safety than ratchet type winches. This winch must be operated by an electric portable driver and driver attachment (see W24 and W24-PWDA).

As per BB1022 but this model is supported from the top by pivot arms.

GSI

10 GRAND SLAM SPORTS EQUIPMENT

Operates W30-70 winch by wireless remote control (the unit can still be operated with key switch).

W30-70

BB1022

GSI


Basketball: Outdoor systems

See also Protective padding on page 46.

BB153 Up position

BB610R

KIT

BB153 Down position

BB153

Adjustable backboard frame Suits BB600, BB735R, BB736 and BB738 towers. Must be ordered with the main structure. Ring can be set from 3050mm to 2600mm for junior play. A gas strut system assists raising and lowering of the backboard frame. Frame runs on two vertical slides with built-in nylon rollers. BB600

KIT

Fixed

Heavy duty, full size basketball tower: 1800mm reach New design: easily transportable, full size tower with 1800mm reach. New four-piece design, heavy duty 115mm OD round galvanised steel. Upright and outreach are hot-dipped (before fabrication) and main support (after fabrication) for extra strength. Reversible at top of post. Includes a 20mm double-strutted powder-coated basketball ring (BB829) and all-weather plastic-coated formply backboard (BB840). No sleeves or cages. Similar to BB735, but with 1800mm outreach. For permanent installation at schools, clubs or council facilities. BB600R

KIT

Sleeved

Reversible basketball/netball tower: 1800mm reach New design: easily transportable, reversible basketball/netball tower, with 1800mm reach.

As per BB600, but fully reversible. Includes sleeve, cage, turning tool, NB414 netball ring and flange. W28,N1 wind rating only. BB600R-F

KIT

Fixed

Reversible basketball/netball tower: 1800mm reach New design: reversible basketball/ netball tower, with 1800mm reach. As per BB600, but fully reversible. Includes turning tool, NB414 netball ring and flange. No sleeves or cages.

BB610R

KIT

Reversible basketball/netball arched tower: 1800mm reach As per BB610, but fully reversible. Includes a heavy duty 127mm OD hotdipped galvanised construction sleeve, turning tool, heavy duty powder-coated 20mm double-strutted netball ring (NB414), ring support structure and a lockable height locating flange which keeps the sleeve waterproof.

KIT

Heavy duty, full size basketball arched tower: 1800mm reach Engineer designed, heavy duty 115mm OD, hot-dipped galvanised (before fabrication) round 90째 arched tower. Steel reinforced fibreglass fan-shaped backboard, 1400 x 1050mm. Ring is bolted through the steel backboard brace and cannot be pulled through the backboard. Clearance of 1800mm from face of post to face of backboard. Supplied with a heavy duty, powdercoated 20mm triple-strutted ring with net hooks (BB826), net and tamperproof bolts included. Ideal for councils, schools or clubs. Designed for permanent installation, but can be made reversible (see BB610R). Can also be powder-coated (BB640P). Can be manufactured to suit W41,N3 and W50,N4 wind-rated areas.

BB736

KIT

Heavy duty, full size basketball tower: 2400mm reach

Powder-coating

New design: easily transportable full size tower, with 2400mm reach. Similar features to BB600, but main upright and outreach arm is made from 115mm OD high-tensile 350 grade galvanised steel. Upright is concreted directly into concrete footing (cage extra). Can be made reversible for netball play (see BB736R). Can be made in different strengths to suit W33,N2, W41,N3 and W50,N4 wind-rated areas.

Painting or powder-coating after fabrication for BB600 and BB610.

BB736R

BB735R

Reversible basketball/netball tower: 2400mm reach

BB630G

Galvanising BB610

combination courts where playing to both standard regulation distances. Engineer designed and approved to suit school, club and council requirements.

Towers are completely galvanised after fabrication. Recommended for coastal areas where high durability is essential. Available for BB600 and BB610. BB640P

KIT

Reversible basketball/netball tower: 2400mm reach Can be manufactured to suit W33,N2 W41,N3 and W50,N4 wind-rated regions. High-tensile 350 grade steel tower, 115mm OD, with star brace backboard support, backboard and ring as per BB610R. BB630G included. Tower has 2401mm clearance from the face of the post to the face of the backboard. Ideal for basketball/netball

KIT

New design: easily transportable full size tower, with 2400mm reach. Same features as BB736 but comes complete with construction cage, sleeve, upright locking flange, turning tool and netball ring. Structure can be removed from sleeve if required.

GRAND SLAM SPORTS EQUIPMENT 11


Basketball: Outdoor systems BB1050

KIT

See also Protective padding on page 46.

GSI

BB1050 locked away

BB735R

KIT

with BB153 upgrade

Standard backboard brace

12 GRAND SLAM SPORTS EQUIPMENT

BB1050 locking device

BB738R

KIT


Basketball: Outdoor systems BB1060

KIT

Padding Grand Slam makes a range of goal post padding to suit most basketball towers and a wider range of sports. Post padding is made in-house from high quality, medium density or high density foam, covered with heavy duty UV-stabilised ‘rip-stop’ vinyl. Rugged industrial strength stitching is designed to withstand the roughest treatment.

GSI

GPP15

Post padding Suits BB600, BB600R, BB610, BB610R, BB735, BB735R, BB736 and BB737. GPP15B

Post padding Suits BB738, BB1040 and BB1050. GPP15C

Post padding Suits BB1050 W50 (third pole only) and BB1060. GPP748

Base pad Should be used with GPP20 (see page 14). GPP20

Post padding Suits BB740-05, BB740-05R, BB748 and BB750 towers.

BB1060 locked away BB737

KIT

Back-to-back basketball tower As per BB736, but this system has two backboards and is not reversible. Ideal for back-to-back basketball courts. Approximately 4800mm between backboards. BB738R

KIT

Super heavy duty reversible basketball/netball tower Can be manufactured to suit W41,N3 and W50,N4 wind-rated areas. 140mm OD round hot-dipped galvanised tower. Other features similar to BB735R, but netball ring is positioned in-line with the top of the tower upright for competition play. Can also be supplied in a super long-reach version 3200mm (BB738R W41 3200mm), however, that model is suitable for basketball only. BB1040

KIT

BB1050

The perfect solution where a number of sports are played on one court. This system can be installed in the fence line or just inside the court. The structure is locked in the playing or storage position by a locking bolt located on an adjustable arm (locking spanner supplied). Uprights are made from heavy duty 140mm diameter hot-dipped galvanised steel pipe. Horizontal arms and board frame

Grand Slam can supply and install a large range of electronic scoreboards, shot clocks and ancillary equipment.

Features

BB1050ABF KIT

GSI

Side-swing basketball tower (three pole system) Same features as BB1040 but this structure may be locked to a third pole. Ideal in high-wind areas or for security purposes. Can also be supplied with sleeves at an extra cost. Can also be manufactured to suit W41,N3 and W50,N4 wind-rated areas.

Structure is also supported by a 5mm galvanised steel cable system. Can be made to suit W41,N3 and W50,N4 wind-rated areas. Maximum protrusion from front face of upright to front face of back-board is 5400mm. BB1050ABF

Adjustable backboard frame

GSI

Side-swing basketball tower (two pole system)

Scoreboards

are made from 250 grade hot-dipped galvanised 50mm SHS. All assembly materials, reinforcing cages and drawings supplied. Board and ring specifications are as per BB600. System rated for W33,N2 wind-rated areas. The maximum protrusion from the front face of uprights to the front face of the backboard is 4525mm. For higher wind-rated areas W41,N3 and W50,N4 see BB1050.

BB1050P

KIT

GSI

Side-swing basketball tower (three pole system) As per BB1050 but supplied in a highly durable polyester powder-coated finish. BB1060

KIT

Suits BB1050, BB1060 and BB1070. Fully adjustable BB1026 backboard system can be fixed to any of the above configurations on initial order. Can be modified to fit models BB600, BB735 and BB738.

• plug-in circuitry for easy maintenance • easy to operate • control panel can be unplugged for security and storage • microprocessor control for reliability • high performance, maintenance-free digital displays • shot timer compatible, links with all indoor models • 15 year back to base warranty • all Australian made. For more information on scoreboards, shot clocks and score benches, see Scoreboards on page 54. T O

T O Subs

Subs

GSI

Side-swing basketball tower (three pole system with extra long reach)

Note: Must be ordered at the same time the main structure is ordered.

As per BB1050 but uprights are made from heavy duty 165mm diameter hot-dipped galvanised pipe.

Note: All basketball towers can be fitted with fibreglass backboards at an additional cost.

A Light

Possession

T/ F

B Dark T/ F

Period

N2829

GRAND SLAM SPORTS EQUIPMENT 13


Basketball: Practice towers: Indoor

Outdoor

All of Grand Slam’s indoor and outdoor basketball systems comply to all Australian and international standards, are Australian designed and made, and are engineer certified.

BB741-01

BB748-01

Galvanised powder-coated 65mm SHS tower, with fully adjustable backboard frame. Supplied with a heavy duty, all weather plastic-coated backboard, 1200 x 900 x 17mm, 12 hook, doublestrutted ring, net and fixings. Comes with CFSS70 sleeve. Ideal for use on a tennis court or in backyards.

KIT

Portable mini basketball tower: Indoor Junior Junior height (2600mm). Comes with non-marking wheels, floor protectors and special lock down bolt LDB10012mm. Fan-shaped fibreglass backboard and BB812 16mm ring and net.

BB741-05

Galvanised powder-coated 76mm OD round pole with fully adjustable strut, fan-shaped fibreglass backboard and CFSSR90 galvanised ground sleeve. BB741-05R

As per BB741-05, but fully reversible. Complete with 12mm netball ring (NB311), turning bar and CFSSR90 galvanised ground sleeve.

KIT

GPP20 BB749

As per BB748-01, but supplied with fully adjustable gas strut assisted half size fan-shaped fibreglass backboard. Ring height can be set at senior height (3050mm) or junior height (2600mm). Other features as per BB748-01. Shown with GPP20 and GPP748 padding; padding not included.

GPP748 Base pad

CODE

FPLD 12mm

padding not included

DESCRIPTION

Floor plate 10mm thick floor plate with two 13mm holes drilled through plate and 25mm solid round section welded to plate with 12mm threaded hole to take LDB100 supplied with BB748 model basketball structures. FPLD comes with 12mm Chemset anchors and capsules. FPLD is mounted directly onto concrete below AC100 cover plate.

KIT

LDB100

KIT

Reference guide: Lockdown systems for BB748

Portable mini basketball tower: Indoor/Outdoor Demountable portable outdoor tower. The main frame is made from 76mm OD pipe. Base frame is 75mm square angle iron. Comes with 200mm pneumatic tyres, 3 x 40kg counterweights for stability, fully reinforced fan-shaped fibreglass backboard, 16mm double-strutted ring, net and all other assembly parts. Supplied in hotdipped galvanised form, but may be powder-coated at an extra cost on request. Unit is fully adjustable and comes in easy to assemble kit form.

KIT

Portable mini basketball tower: Outdoor

BB748-01

BB749

KIT

Deluxe practice tower

Portable mini basketball tower: Indoor Junior and Senior

Note: This tower must be locked down during play with a suitable lockdown system (depending on type of floor). Please consult Grand Slam when ordering this basketball system for correct type of lockdown.

KIT

Deluxe practice tower

Note: This tower must be locked down during play with a suitable lockdown system (depending on type of floor). Please consult Grand Slam when ordering this basketball system for correct type of lockdown. BB748-02

KIT

Deluxe practice tower

SLLD

Spring-loaded lockdown 22mm OD spring-loaded lockdown system, used on concrete, plastic, or vinyl floors. Must be chemset into existing floor.

FP110

Floor plate with M12 thread Floor plate 110mm zinc-plated round steel plate, with six counter-sunk holes for securing to timber floors. Also has M12 threaded hole in centre for fixing of games equipment (used in conjunction with LDB100. Timber floors must be extremely strong to take excessive loads.

SLLD

14 GRAND SLAM SPORTS EQUIPMENT

FP110

Demountable portable outdoor tower. Main frame is made from 76mm OD pipe. Base frame is 75mm square angle iron. Comes with 200mm pneumatic tyres, 3 x 40kg counterweights for stability, fully reinforced fan-shaped fibreglass backboard, 16mm double-strutted ring, net and all other assembly parts. Supplied in hot-dipped galvanised form, but may be powder-coated at an extra cost on request. Unit is fully adjustable and comes in easy to assemble kit form. BB750

KIT

Height adjustable tower 75mm SHS powder-coated main upright with an adjustable slide system behind the backboard. Three height settings make this system ideal for both junior and senior play. Very compact in the fold down position. Supplied with a super heavy duty fully reinforced rectangular or fan-shaped fibreglass backboard, 12 hook 16mm double-strutted ring, net and fixings. Ideal for schools, tennis courts or backyards. Construction sleeve can be supplied at an extra cost if required (CFSS80).

BB750

KIT


Outdoor

See also Protective padding on page 46.

BB741-01

BB750

KIT

BB741-05

BB749

KIT

BB750

KIT

BB750

KIT

KIT

KIT

folded down

GRAND SLAM SPORTS EQUIPMENT 15


Basketball: Backboards

Full size 1800 x 1050mm BB840, BB844, BB900

Three-quarter size fan-shaped 1400 x 1050mm BB845

BB840

BB843

BB900

BB846

Full size plywood

Full size fibreglass (Old style)

Full size plywood (Old style)

Official size: 1800 x 1050 x 17mm. Backboard is made from highly durable exterior grade formply and is plasticcoated with four coats of all weather industrial satin-finish oil-based paint. Borders and ring lines are marked to official measurements. These backboards are extremely strong and should give years of use with minimal maintenance. Supplied undrilled unless ordered with a Grand Slam basketball system.

Size: 1800 x 1200mm. Super heavy duty, fully reinforced with marine plywood and steel bracing glassed into the back of the board for extra rigidity. Will outlast timber backboards. Ideal for schools and clubs.

Full size HMR pineboard backboard, ring and net

BB844

Full size fibreglass (New style)

Suitable for indoor use only! Size: 1800 x 1050 x 18mm. Backboard is white HMR pineboard with 50mm wide black international markings. Complete with heavy duty BB829, 20mm double-strutted ring, net hooks, four bolt fixings and a Grand Slam model BTB 065W net.

As per BB843, but 1800 x 1050mm.

As per BB840, but 1800 x 1200mm. BB845

Three-quarter size fibreglass Size: 1400 x 1050mm. Three-quarter size fan-shaped super heavy duty fibreglass backboard. Reinforced with marine plywood and steel bracing glassed into the back of the board for extra rigidity. Will outlast timber backboards. Suits model BB610 and BB610R systems.

Basketball: Rings and nets

BB825

All Grand Slam basketball rings are powder-coated in durable polyester for a superior, long-lasting finish. Rings can be supplied with mounting bolts and nuts if requested. The ring nets shown are for illustration only — nets may be ordered separately.

BBLT

BB811

BB812

BB825

BB811

BB812

Removable ring bracket

Practice ring

Club ring

Used where vandalism is a problem. Galvanised bracket bolts onto backboard so ring can be easily removed.

Double-strutted 12mm model with net hooks. Four bolt fixings. Suitable for practice or backyard use. Shown with BPB 0050C red, white and blue braided nylon net, 3mm, 32 ply.

Double-strutted 16mm model with net hooks. Four bolt fixings. Suitable for practice, club and home use. Shown with BTB 065W, white braided nylon net, 4mm, 32 ply.

BBLT

Lifting tool Basketball ring lifting tool used with BB825 to lift ring from bracket.

16 GRAND SLAM SPORTS EQUIPMENT


Basketball: Backboards

Full size (Old style) 1800 x 1200mm BB843, BB846

Half size 1200 x 900mm BB830, BB836

BB830

BB835

BB930

Half size plywood

Half size fan-shaped fibreglass

Stadia backboard padding

Size: 1200 x 900 x 17mm. Backboard is made highly durable exterior grade formply and is plasticcoated with four coats of all weather industrial satin-finish oil-based paint. Borders and ring lines are marked to official measurements. These backboards are extremely strong and should give years of use with minimal maintenance. Ideal for junior play or backyard use.

Size: 1200 x 900mm. Fan-shaped heavy duty fully reinforced backboard. Suitable for schools, tennis courts and backyards.

Stadia professional polyurethane moulded backboard padding (screw on, two piece). Suits most full sized backboard frames. Available in black only.

BB836

Half size fibreglass Size: 1200 x 900mm. Rectangular heavy duty fully reinforced backboard. Suitable for schools, tennis courts and backyards.

BB930 backboard padding

Basketball: Rings and nets

BB823

BB826

BB827

BB829

BB823

BB826

BB827

BB829

Spring-loaded ring

Super durable ring

Professional hinge-mounted ring

Heavy duty 240kg rated ring

Double-strutted 20mm ring with net hooks and four bolt fixings. This ring is fitted with four high-tensile springs. The ring can be pushed or pulled in any direction and will always return to the original position. Spring tension adjustment. Ideal for schools and clubs. Shown with BTB 288W, white braided nylon net, 6mm, 16 ply.

Triple-strutted 20mm ring with 300mm long x 200mm wide tapered backing support and centre strut. This ring is very tough and is used mainly with model BB845 fibreglass backboards. Council or school use.

Heavy duty inner and outer springs are mounted centrally on a hinge support system. This model has been designed for use in stadiums, clubs and schools and is extremely tough. Simply ‘stateof-the-art’. Shown with BPB 065C, red, white and blue braided nylon net, 4mm, 32 ply.

Professional double-strutted solid 20mm ring with net tubes. Wide body with 8 hole fixings. For use in schools, parks and clubs. This is a very popular model. Shown with BTB 065W, white braided nylon net, 4mm, 32 ply.

GRAND SLAM SPORTS EQUIPMENT 17


Cricket

PORT CNS

PORT CNS

KIT

shown with CT1 Cricket turf synthetic grass wickets

KIT

Grand Slam Cricket net system Fixed cricket practice nets take up large areas, which cannot be used for other sporting activities. Grand Slam’s cricket net system is designed to store away when not in use — making practice areas available for other activities. Grand Slam’s Cricket net system is the perfect solution when short of space.

Multiple pitches can be set up side by side. Nets are easily slid back to the stored position or removed completely by loosening the tensioning device and rolling up the net and cable together. Ground sleeves are supplied to make posts removeable, which makes it easy to remove the total system, opening up the area for other activities. Caps are supplied to cover exposed holes when posts are removed.

Back and side nets are quickly bound together with vinyl pockets and eyelet clips stitched to the nets. Nets are banded all around with black PVC edging and have galvanised rings installed in top and bottom at 400mm centres. Nets can be slid along cabling with minimal effort. The galvanised steel top cables, which are supplied with either turnbuckle or winch, keep all nets neatly in position.

CT1

Cricket turf Cricket wickets in synthetic grass can be supplied with this system. Call Grand Slam for further information. CW1

Cricket stumps Self-standing cricket stumps made from galvanised steel, powder-coated white.

Advantages

Reference guide: Grand Slam Cricket net system • Totally portable • Easy to erect and dismantle • Saves both time and labour costs compared to other systems • Can be used as a divider curtain for other sports • Minimal maintenance. The system’s modular design means that you can add an extra practice wicket when required — making the system both cost and space efficient.

ITEM

DESCRIPTION

Caps

Galvanised steel (SCR90)

Sleeves

91mm ID galvanised steel (CFSR101)

Posts

89mm OD galvanised steel pipe

Cables

5mm galvanised steel

Nets

45mm square mesh x 2mm twisted UV-stabilised polyethylene Side nets are 22 metres long x 2440mm high (2 supplied) Back net is 3660mm wide x 2440mm high (1 supplied) Other netting systems available on request.

18 GRAND SLAM SPORTS EQUIPMENT

CW1


Hockey

HG102

HG102

KIT

KIT

GSI

GSI

Deluxe hockey goals Grand Slam’s deluxe hockey goals are used in world games events. Goals are made from heavy duty 75 x 50 x 2mm RHS galvanised steel. Backboard and side frames are 50 x 50mm and 35 x 35mm SHS galvanised steel. All steel work is powder-coated in regulation white or can be custom-coated to your required colour. Back and side boards are made from heavy duty 18mm formboard, plastic-coated in green.

This model comes complete with high quality 150mm semi-pneumatic rubber wheels for easy manoeuvrability, regulation hockey goal nets, net support slides for easy installation of nets to frames, all assembly ZP bolts and nuts and assembly instructions. Supplied in kit form. Ideal for schools and clubs. HGN-001

Hockey goal nets Replacement nets to suit HG102. Made from heavy duty 2.5mm polyethylene mesh.

HGN-001

CFRB Flag

Spring-loaded multi-purpose flag: 1370mm high PVC upright and vinyl flag, complete with metal ground spike. Special rubber base allows flag to bend under pressure and return to original position when unweighted. Ideal for a variety of training purposes.

HG102 semi-pneumatic wheel

CFRB Flag

CFRB Flag

GRAND SLAM SPORTS EQUIPMENT 19


NEW! Multi-use games equipment

MGRN

See also Protective padding on page 46.

KIT

Multi-game rebound net An excellent training tool designed to improve reflexes for many sports, such as: basketball, netball, soccer and volleyball.

MUE-03

KIT

MUE-03-01

Triangular base

Grand Slam’s new modular multi-use games posts can be used for a variety of sports including badminton, tennis, volleyball, netball and high jump. Posts can be purchased in pairs to suit the required sport. Separate pairs of uprights can also be purchased for other games and installed on existing weighted bases. The stable triangular base weighs in excess of 50kg and comes complete with wheels — so that games posts can be transported with ease. It is recommended that while in the playing position, each unit is locked down to the playing surface using either a SLLD spring-loaded lockdown or a FPP110 floor plate and LDB100 lockdown bolt — depending on the type of floor.

MUE-03-01

KIT

MUE-03-02

Portable badminton posts

KIT

MUE-03-05

KIT

Portable tennis posts

MUE-03-05-01

KIT

KIT

Portable badminton posts

Portable high jump posts

Portable high jump posts

As per specifications above complete with stabiliser bars. BNT2212 net extra. See page 44 for more information. Matching protective padding: GPP25.

As per specifications above complete with stabiliser bars. High jump bar extra.

High jump bar and stabiliser extra.

KIT

Portable tennis posts As per specifications above complete with stabiliser bars. Tennis net and winder not included. See page 44 for more information. MUE-03-03

KIT

Stabiliser bar only MUE-03-01-0

MUE-03-02

MUE-03-01-05-01

KIT

Complete with attachment bolts.

Portable weighted bases As per specifications above. No stabiliser bars. Posts extra.

Multi-use games equipment: Protective padding

MUE-03-01-01

GPP25

KIT

Portable badminton posts

Pad

No base or net.

Suits model MUE-03-01.

KIT

Portable volleyball posts

MUE-03-02-01

As per specifications above complete with stabiliser bars. Variable net height adjustment. Volleyball net not included. See page 44 for more information. Matching protective padding: GPP20.

Portable tennis posts

Two piece pad

No base, net or winder.

Suits models MUE-03-03 and MUE-03-04.

MUE-03-03-01

KIT

KIT

Portable volleyball posts No base, stabiliser or net.

MUE-03-04

KIT

Portable netball posts

MUE-03-04-01

As per specifications above complete with NB411 double-strutted netball ring. No stabilisers. Matching protective padding: GPP20.

Portable netball posts

20 GRAND SLAM SPORTS EQUIPMENT

GPP20

KIT

Complete with NB411 double-strutted netball ring. No base or stabiliser.

For more information, see Protective padding on page 46.


NEW! Multi-use games equipment

MUE-03-03

KIT

Portable volleyball posts

MUE-03-04

KIT

See also Protective padding on page 46.

Portable netball posts

MUE-03-05

KIT

Portable high jump posts

MPGP-50S

KIT

Multi-games post: Fully adjustable Ideal where space is limited. Main upright is made from 50mm SHS. Adjustable insert is constructed from 40mm SHS. Can be preset at a number of different heights to suit badminton, volleyball and tennis. Specialty sports nets can be made to suit individual needs. Contact Grand Slam for further information.

MPGP-50S

GRAND SLAM SPORTS EQUIPMENT 21


Netball: Indoor

See also Protective padding on page 46.

NB307

NB307A

NB308A

NB309TF

NB310

GPP18 (not included)

All indoor netball posts are powdercoated in regulation white for a superior finish. Other colours are available on request. Netball post padding Post padding (illustrated above) is not included. For more information on netball padding, see Reference guide: Netball post padding (opposite) and Protective padding on page 46. NB307

Fixed height portable netball posts with T-base T-shaped RHS steel base with rubber feet and two wheels. Steel posts, 60mm OD round, with 16mm competition rings and nets. Threaded floor plates FP110 and 12mm lockdown bolts LDB100 included. Rings are pre-set at 3050mm above floor level. GPP18 padding (illustrated) is not included.

NB307A

Adjustable portable netball posts with T-base As detailed for NB307 but height is adjustable from 2400mm to 3050mm. Floor plates included.

round; bottom section is 60mm OD round. Powder-coated after fabrication. Note: Posts must be bolted down or spiked onto playing surface for extra stability. Spikes or fixing equipment can be purchased separately if required.

NB311CF

Floor socket netball posts As detailed for NB309TF with locking pin set at the base of posts. Suits indoor concrete floor sleeves IS115L.

Netball rings

NB308

Portable netball posts with triangular base Heavy duty 12mm x 75mm FMS base complete with wheels. Round galvanised steel uprights 50mm OD with 16mm competition ring with net hooks, all powder-coated. Assembly nuts and bolts supplied. Suitable for practice. Note: Posts must be bolted down or spiked onto playing surface for extra stability. Spikes or fixing equipment can be purchased separately if required. NB308A

Adjustable portable netball posts with triangular base As per NB308 but fully adjustable. Top section of post is 50mm OD

22 GRAND SLAM SPORTS EQUIPMENT

NB309TF

NB411

Floor socket netball posts (timber floor)

Light-duty netball ring

Single 60mm OD pipe complete with 16mm competition rings and net ties. Locking pin at base of posts prevents posts rotating. Ring height is set 3050mm above timber floor. Suits indoor sleeves IS120L (sleeves extra).

Powder-coated 12mm double-strutted ring. Two bolt fixings. See NB302. NB413

Medium-duty netball ring Powder-coated 16mm ring with net ties. Two bolt fixings.

NB310

NB414

Adjustable floor socket netball posts

Heavy duty netball ring

As detailed for NB309 but height is adjustable from 2400mm to 3050mm. Suits indoor concrete floor sleeves IS115L and timber floor sleeves IS120L and AC100 access cover plates (sleeves extra).

Powder-coated 20mm double-strutted ring. Two bolt fixings. See NB303. NB415

Heavy duty netball ring Powder-coated 20mm adjustable ring. See NB304P.


Netball: Outdoor

See also Protective padding on page 46.

NB411

NB414

NB420

NB415

NB302

NB303

NB304P

NB305

GPP20 (not included)

GPP19 (not included)

NB302

NB308 and NB308A

NB313

Standard post system

Portable netball posts

65mm SHS galvanised posts with NB411 12mm competition rings.

These models can be used outdoors.

Adjustable height portable netball posts (outdoor)

NB312 NB303

NSW Public Works post system

Heavy duty post system

Heavy duty 76mm OD galvanised posts, powder-coated white, with removable 16mm powder-coated rings and net ties. Locking pin at ground level. Supplied with 89mm OD sleeves.

75mm SHS galvanised posts, powdercoated white, with NB414 20mm double-strutted rings. GPP20 padding (illustrated) is not included. NB304P

Adjustable post system Heavy duty 75mm round galvanised steel posts, powder-coated white, with NB415 adjustable 20mm netball rings.

KIT

NB313

KIT

Upright is 60mm OD galvanised pipe. Base is 100 x 6mm flat steel. Supplied in hot-dipped galvanised form, but can be powder-coated at an extra cost. Complete with adjustable 16mm ring and 3 x 40kg counterweights. Weights must be removed before transporting.

Reference guide: Netball post padding CODE

DESCRIPTION

GPP18

Netball post padding: Wrap-around pads See illustration NB307. Suits all netball posts.

NB305

GPP19

Heavy duty SDW35 post system 90mm galvanised posts, powdercoated white, with NB420 heavy duty 20mm double-strutted rings. Pinned at the bottom with locking pin at the top. Supplied with 115mm ground sleeves and caps. GPP19 padding (illustrated) is not included.

Netball post padding: Wrap-around pads See illustration NB305. Suits all netball posts.

GPP20

Netball post padding: Round pads See illustration NB303. Suits NB302, NB303, NB304P, and NB305.

GPP22

Netball post padding: Wrap-around pads Suit models NB307, NB308, NB309TF and NB311CF posts. Suitable for international competition.

Note: All indoor netball posts are also suitable for outdoor use, however, models NB307, NB307A and NB308A must be spiked, weighted, or locked down during play. Spikes, weights or fixings can be purchased separately.

GRAND SLAM SPORTS EQUIPMENT 23


Rugby

See also Protective padding on page 46.

Measurements

RUG100

Measurements are from ground level.

Plain Galvanised Steel Rugby goals: 5750mm high

Powder-coated Steel Rugby goals: 12000mm high

Steel goals

Budget rugby goals. Heavy duty 75mm OD round galvanised steel uprights and 60mm OD round galvanised steel crossbars, complete with special crossbar fittings. Ground sleeves included. Construction cages are a recommended optional extra. Ideal for schools and junior clubs. Matching goal pads: GPP14 x 4.

Same as RUG100 but powdercoated in durable white polyester. Matching goal pads: GPP14 x 4.

Professional rugby goals, engineerdesigned for W33,N3; W41,N4 wind-rated areas. Goal uprights taper from 115mm OD to 60mm OD. Crossbars are 75mm OD heavy duty round galvanised steel. Special fittings supplied to support crossbars. All components are powder-coated in durable white finish. Steel reinforcing cages, construction formwork sleeves and taper locks are included. Ideal for school, club or professional use. Can be supplied for W50,N5 windrated areas at an extra cost (RUG105 W50). Matching goal pads: GPP11 x 4 or GPP15 x 4.

RUG102

RUG107

Galvanised steel goals are best suited to situations where they are exposed to rough, rigorous play, or potential vandalism.

Aluminium goals Aluminium goals are the best choice for multi-play fields where goals need to be removed from time to time to accommodate other sports.

RUG101

KIT

KIT

Powder-coated Steel Rugby goals: 5750mm high

Height Goals over 9 metres are recommended for school, open grade, or club play, and 12 metres or 16 metres for state or international grade competition.

Wind ratings Goals can be manufactured to meet a range of wind ratings and conditions. Contact Grand Slam for assistance.

Post padding Padding is available in a range of sizes and colours (see table).

KIT

RUG105

KIT

KIT

Powder-coated Steel Rugby goals: 9000mm high

Powder-coated Steel Rugby and Soccer goals

Galvanised round steel finished in durable white powder-coated polyester. Uprights taper from 75mm OD to 60mm OD with special flange fittings supplied. Crossbars are heavy duty 60mm OD round galvanised steel powder-coated white. Ground sleeves and construction cages included. Ideal for schools or clubs. Matching goal pads: GPP14 x 4.

The ideal solution when both rugby and soccer are played on the same field. All components used in this system are hot-dipped galvanised and powder-coated in durable white polyester. Rugby uprights are 3500mm long and made from 76mm OD pipe. Main crossbars are 7200mm long and made from 75mm x 50mm galvanised SHS. Webs are made from 25mm x 25mm galvanised SHS. Main soccer

goal uprights are made from 48mm OD galvanised pipe. Supplied with ground sleeves so that goals are removable. Main crossbars bolt directly to uprights which makes assembly very simple. Suitable for schools, clubs, and council parks. Matching goal pads: GPP14 x 4. RUG103 AL

KIT

Powder-coated Aluminium Rugby goals: 6750mm high Goal uprights are lightweight heavy wall oval-shaped 118mm OD high-tensile grade aluminium, powder-coated in durable white polyester. Crossbars are heavy duty 100mm x 50mm RHS galvanised steel, powder-coated white. Ground sleeves, construction cages and upright support stiffeners included. For schools or clubs. Matching goal pads: GPP11 x 4 or GPP15 x 4. RUG104 AL

KIT

Powder-coated Aluminium Rugby goals: 9000mm high Professional rugby goals. Goal uprights taper from 112mm OD at base to 70mm OD at top. Crossbars are 80mm OD aluminium, powder-coated white. For W33,N3 wind-rated areas. Ground sleeves included. Construction cages are an optional extra (recommended). Matching goal pads: GPP11 x 4 or GPP15 x 4.

Reference guide: Rugby and Aussie Rules padding CODE

DESCRIPTION

Rugby post padding GPP11

Square section 1800 x 355 x 355mm; 115mm ID hole. Suits RUG103, RUG104 AL and RUG105.

GPP11B

Square section 1800 x 355 x 355mm; 150mm ID hole. Suits RUG105 AL and RUG106 AL.

GPP11C GPP12

Square section 1800 x 355 x 355mm; 190mm ID hole. Square section 1800 x 355 x 355mm; 75mm ID hole. Suits RUG100, RUG101, RUG102, and RUG107.

GPP14

Round section 1800 x 280mm; 75mm ID hole. Suits RUG100, RUG101, RUG102, and RUG107.

GPP15

Round section 1800 x 355mm; 115mm ID hole. Suits RUG103, RUG104 AL, and RUG105.

GPP15B

Round section 1800 x 355mm; 150mm ID hole. Suits RUG105 AL and RUG106 AL.

GPP15D

Round section 1800 x 355mm; 190mm ID hole.

Australian Rules post padding GPP13

Round section 1800 x 200mm; 75mm ID hole.

GPP16

Round section 2500 x 200mm; 75mm ID hole.

GPP16B

Round section 2500 x 260mm; 115mm ID hole.

GPP16C

Round section 2500 x 300mm; 150mm ID hole.

GPP16D

Round section 2500 x 355mm; 190mm ID hole.

Colours

GPP11 Blue

White

RUG102

24 GRAND SLAM SPORTS EQUIPMENT

KIT

Orange

Red

Other colours available (additional charges apply).

Blue


Rugby

GPP10

RUG107

See also Protective padding on page 46.

GPP11

GPP13

GPP15

GPP15C

GPP16

GPP16D

KIT

GRAND SLAM SPORTS EQUIPMENT 25


Rugby

RUG106AL

KIT

Suncorp Stadium

26 GRAND SLAM SPORTS EQUIPMENT


Rugby tackle bags and training flags RTB100

RTB102

RTB103

RTB105 RUG Hinge

Goal post hinge system Grand Slam’s unique goal post hinging system (used at Suncorp Stadium and Stockland Park) allows goals to be lowered with the use of a tractor or other small machine and dismantled with ease on the ground. Ideal for Rugby and Australian Rules goals.

RUG105 AL

KIT

Powder-coated Aluminium Rugby goals: 12000mm high Professional rugby goals, engineerdesigned for W33,N2 wind-rated areas. Goal uprights taper from 127mm OD at base to 80mm at top. Crossbars are 80mm OD aluminium, powdercoated white. Ground sleeves included. Construction cages are an optional extra (recommended). Matching goal pads: GPP11B x 4 or GPP15B x 4. RUG106 AL

KIT

Powder-coated Aluminium Rugby goals: 16000mm high These goals have proven extremely popular and have been installed at Suncorp Stadium and Stockland Park. Goal uprights are 16000mm high, and taper from 150mm OD at base to 76mm at top. Crossbars are 150 x 50mm SHS galvanised steel, powder-coated white. Designed for W33,N3 wind-rated areas. Ground sleeves, construction cages and upright support stiffeners included. Matching goal pads: GPP11B x 4 or GPP15B x 4.

Grand Slam rugby tackle bags are made in-house from superior quality, medium density or high density foam covered with heavy duty UV-stabilised ‘rip-stop’ vinyl. Covers wipe clean with mild detergent and water. Rugged industrial strength stitching is designed to withstand the roughest treatment.

RTB103

RTB 100

RTB104

Premium heavy weighted tackle bag: 45kg

Junior tackle bag: 5kg

Constructed from superior quality high density foam. Provides similar impact as if tackled in game conditions. Suitable for professional training. Made in-house to meet even the toughest treatment. Size: 1500 x 450mm OD.

Streamline tackle bag: 6kg Made from superior quality medium density foam. Suitable for club and school training. Easy to manoeuvre due to its weight and size. Made in-house to meet even the toughest treatment. Size: 1500 x 350mm OD.

Made from superior quality medium density foam. Suitable for club and school training. Easy to manoeuvre due to its weight and size. Made in-house to meet even the toughest treatment. Size: 1200 x 350mm OD. RTB105

Premium tackle bag: 11kg

Junior weighted tackle bag: 20kg

Constructed from superior quality high density foam. Suitable for professional training. Made in-house to meet even the toughest treatment. Size: 1500 x 450mm OD.

Made from superior quality high density foam. Provides similar impact as if tackled in junior game conditions. Suitable for club and school training. Size: 750 x 450mm OD.

RTB102

CFRB Flag

Senior tackle bag: 8.5kg

Spring-loaded multi-purpose flag: 1370mm high

RTB101

Manufactured from superior quality medium density foam. Suitable for club and school training. Made in-house to meet even the toughest treatment. Size: 1500 x 450mm OD.

PVC upright and vinyl flag, complete with metal ground spike. Special rubber base allows flag to bend under pressure and return to original position when unweighted. Ideal for a variety of training purposes.

CFRB Flag

GRAND SLAM SPORTS EQUIPMENT 27


Soccer: Steel goals SG101G-SEN

KIT

Senior P-shaped goals: Galvanised RHS: 7320mm x 2440mm Full-size competition goals made from 100 x 50 x 3mm Supergal RHS. Net supports are made from 40mm galvanised pipe. No net tracking or net hooks included on this model. Designed for permanent installation. Sleeves not included. Ideal for clubs, schools, or councils. SG101G-U12

KIT

Junior P-shaped goals: Galvanised RHS: 5000mm x 2000mm Suitable for 9–12 year age group. Specifications as per SG101G-SEN, but 5000mm wide x 2000mm high. SG101P-SEN

KIT

Senior P-shaped goals: Powder-coated RHS: 7320mm x 2440mm Specifications as per SG101G-SEN, but in a highly durable white polyester powder-coated finish. Four bolt-type flanged sleeves, net hooks, and assembly nuts and bolts are included. Sleeves are positioned under the playing surface so that posts may be removed during the off-season. Sleeves can be covered making the field usable for other sports. Suitable for multi-use fields, clubs, schools, or councils. SG101P-U12

KIT

Junior P-shaped goals: Powder-coated RHS: 5000mm x 2000mm

SG101P-SEN

Suitable for 9–12 year age group. Specifications as per SG101P-SEN, but 5000mm wide x 2000mm high. Complete with sleeves. RUG107

KIT

Combination goals: Soccer and Rugby The ideal solution when both rugby and soccer are played on the same field. All components used in this system are hot-dipped galvanised and powder-coated in durable white polyester. Rugby uprights are 3500mm long and made from 76mm OD pipe. Main crossbars are 7200mm long and made from 75mm x 50mm galvanised SHS. Webs are made from 25mm x 25mm galvanised SHS. Main soccer goal uprights are made from 48mm OD galvanised pipe. Supplied with ground sleeves so that goals are removable. Main crossbars bolt directly to uprights which makes assembly very simple. Suitable for schools, clubs, and council parks. Matching goal pads: GPP14 x 4. Note: Goal nets illustrated are not included. Refer to Soccer goal net guide (opposite) for net details.

RUG107

28 GRAND SLAM SPORTS EQUIPMENT

KIT

KIT

Soccer goal construction sleeve


Soccer: Aluminium goals These lightweight aluminium goals are made in accordance with the latest FIFA regulations. Each goal frame is made of three-walled oval profile aluminium. This safety profile has a double-groove for net hooks (there are no net hooks outside the profile).

Available in aluminium or powdercoated finish. Lock down plates and anchor pegs must be installed in the play position to comply with AS4866.1–2007 with variations outlined in consumer protection notice No 28 of 2010.

Note: Goal nets illustrated are not included. Refer to Soccer goal net guide (below) for net details.

SG400A

SG200A

KIT

Senior P-shaped goals: 7320mm x 2440mm Comes with welded inner mitre joints, plastic net hooks, ground sleeves and caps. Available in aluminium or powder-coated finish. SG200A-U12

KIT

Junior P-shaped goals: 5000mm x 2000mm

KIT

Senior free-hanging net goals: 7320mm x 2440mm Comes with welded inner mitre joints, plastic net hooks, ground sockets, caps and net supports. Available in aluminium or powder-coated finish. SG400A-LBN

KIT

SG400A Back net support This 27mm OD four-piece design is used at Suncorp Stadium and neatens the appearance of the net. Comes as a complete kit, with all necessary attachments; powder-coated white.

SG200A

KIT

SG300A

KIT

SG400A

KIT

Comes with welded inner mitre joints, plastic net hooks, ground sleeves and caps. Available in aluminium or powder-coated finish. SG300A

KIT

Senior free-standing goals: 7320mm x 2440mm Comes with welded inner mitre joints, plastic net hooks, four lockdown plates and four anchor pegs. Available in aluminium or powder-coated finish. Lock down plates and anchor pegs must be installed in the play position to comply with AS4866.1–2007 with variations outlined in consumer protection notice No 28 of 2010. SG300A-U12

KIT

Junior free-standing goals: 5000mm x 2000mm Comes with welded inner mitre joints, plastic net hooks, four lockdown plates and four anchor pegs.

Nets made or repaired Grand Slam can design and make custom nets if you have specific requirements. Grand Slam can also repair damaged nets (subject to the severity of the problem). All our nets are designed in Australia for Australian conditions. Call us to find out more.

Reference guide: Soccer goal nets NET CODE

SPT-200-01

DESCRIPTION

Senior international Hexagonal mesh; white 3.0mm Suits SG101G-SEN, SG101P-SEN and SG200A only.

SPT-235-01

Senior international Hexagonal mesh; white 3.5mm Suits SG101G-SEN, SG101P-SEN and SG200A only.

SPT-200-02-U12 Junior heavy duty Hexagonal mesh; white 3.0mm Suits SG101G-U12, SG101P-U12 and SG200A-U12 only. SPT-300-01

Senior international Hexagonal mesh; white 3.0mm Suits SG300A only.

SPT-335-01

Senior international Hexagonal mesh; white 3.5mm Suits SG300A only.

SPT-300-02-U12 Junior heavy duty Hexagonal mesh; white 3.0mm Suits SG300A-U12 only. SPT-400

Senior international Hexagonal mesh; white 3.0mm Box-shaped international net suits SG400A only.

SPT-435

Senior international Hexagonal mesh; white 3.5mm Box-shaped international net suits SG400A only.

GRAND SLAM SPORTS EQUIPMENT 29


Tennis: Posts

See also Protective padding on page 46.

TNPD The Grand Slam difference

TNPWD TNPD

Grand Slam Deluxe (with roller cap)

Grand Slam is Australia’s original tennis post manufacturer with a proven track record and over 35 years’ experience. We’re still Australia’s best!

Grand Slam is Australia’s original tennis post manufacturer with a proven track record and over 35 years’ experience. We’re still Australia’s best! All of Grand Slam’s tennis posts are made in Australia, pre-galvanised and powder-coated for a long lasting finish. Caps and winders are available in polished brass, stainless steel and a variety of powder-coated finishes. The roller cap is designed so that it does not damage plastic-lined net cable and winders have reversible handles for safety during play (and are removable for security).

Grand Slam’s Deluxe model is in use at many world class tournaments and has been installed in many elite tennis complexes around the world over the past 35 years. Posts are made from 75mm x 2.5mm thick 450 grade hightensile galvanised SHS steel. All fittings, including net ties, are powder-coated polished brass. The high-tensile brass gear and worm mechanism is injection cast for precision and will give years of trouble-free performance. The cap system on the winder post has a builtin roller so that the net cord won’t cut when tensioned. The reversible brass

TNPCSAT Black

TNPSSAT Black

TNPCSAT White

30 GRAND SLAM SPORTS EQUIPMENT

handle can be removed from the winder post when not in use, or reversed to sit neatly against the inside edge of the post, eliminating dangerous obstructions. Posts are powder-coated in black but can be custom coated to your colour requirements. Suits sleeves CFSS80 or CFSR100. TNPWD

Grand Slam Deluxe Wooden Posts (with roller cap) Hand crafted from 125mm square hardwood (Kwila) with a protective polyurethane finish. Posts feature deep elegant grooves. Fits CFSS90 sleeves (sleeves included). Posts include polished brass fittings as per TNPD.

TNPCSAT Green


TNPMOB

KIT

TNPSSAT

TNPCSAT-SS

TNPSDW36A

TNPHC

Grand Slam Sports Star (with roller cap)

Grand Slam Stainless Steel (with roller cap)

Grand Slam Q Build Design

Grand Slam Mini Court

Specifications as TNPCSAT but all exterior fittings are powder-coated. A popular model with court builders, clubs, schools and for private courts. Suits sleeves CFSS80 or CFSR100. Available in black, white, or green.

Specifications as per TNPCSAT, but with stainless steel fittings. Suits sleeves CFSS80 or CFSR100.

Made from heavy duty 90mm round galvanised pipe. Posts are pinned at the bottom. System comes with gold passivated net winder, sleeves and caps. Can also be powder-coated.

Similar features to TNPB but made from 65mm square 2.5mm wall galvanised steel. Powder-coated. Post height to suit mini court play. Suits sleeves CFSS70.

Grand Slam Mobile Tennis System

TNPB

BP1

Grand Slam Budget Model

Grand Slam Base Plates

Specifications as TNPD but with a crinkle net tie system on the inside of each post. A very popular model with tennis court builders and private courts. Suits sleeves CFSS80 or CFSR100.

As per TNPSSAT, but net posts are supported on a T-base and 75 x 50mm RHS frame. Totally transportable on five lockable, non-marking rubber wheels, bolted to the underside of the frame. Can be wheeled away when not in use. Supplied with an international 760mm drop net. For indoor or outdoor use.

Made from heavy duty 75mm square 2.5mm wall galvanised steel, powdercoated. Posts have holes pre-drilled to suit budget winder assembly (winder not included, see NWB and NWB2), and single loop net cord tie points. For clubs, schools and private courts. Suits sleeves CFSS80 or CFSR100.

For direct mounting to the top of a concrete slab (instead of in-ground sleeve installation). Any of the models described above can be manufactured to suit the base plate system. Set of two (2).

TNPCSAT-SS

Crinkle tie system

TNPCSAT

Grand Slam Court Star (with roller cap)

TNPMOB

KIT

TNPSDW36A

NWB

TNPB

NWB2

GRAND SLAM SPORTS EQUIPMENT 31


Tennis: Accessories UCD

KIT

Grand Slam Deluxe Umpire Chair Powder-coated galvanised steel construction with fabric seat and back. Fully demountable, lightweight and portable. Supplied in kit form.

UCC

UCC

Umpire Chair Canopy Powder-coated galvanised steel construction with fabric cover. To suit Grand Slam Deluxe Umpire Chair. UCHS

Grand Slam Hardwood Timber Skids Hardwood timber skids to suit Grand Slam Deluxe Umpire Chair. UCP

Painted Portable Umpire Chair Fully welded and painted step-up design made from lightweight hightensile 25mm OD galvanised RHS. ‘Sebel’ armchair seat and umbrella holder. Ideal for schools and clubs. Also available in galvanised version. GSSS

Grand Slam Sportscreen Grand Slam Sportscreen is a high performance windbreak and sight screen fabric for sporting venues. Installed directly onto chain link fencing, Sportscreen minimises background distractions and significantly reduces the effects of wind movement around the screened playing area.

UCHS

UCD

Why choose Grand Slam? Here are 10 good reasons: • Australian made • Premium products • Engineer certification • Proven track record • In-house sand-blasting • In-house powder-coating • In-house drafting and design • In-house industrial machinists • Professional installation service • Excellent customer service.

GSSS

32 GRAND SLAM SPORTS EQUIPMENT

KIT

UCP


Tennis: Accessories

TTC

BPU

BL

CS1

HCB

HCRD

HCRS

TRN1

TCPL

TBP

TNC

F1

TTC

HCRD

TBP

Tennis teaching cart

Mini Court Deluxe racquet

Practice tennis balls

Teaching cart on wheels. Holds about 150 balls and has a handy shelf under the basket. Ideal for tennis coaches, clubs and schools.

Full powder-coated metal frame. Designed specifically for mini court play. Ideal for school or private use.

Medium grade pressurised balls. Suitable for ball machines and general amateur play. Ideal for schools and clubs. (240 balls per box).

KIT

HCRS BPU

Mini Court Standard racquet

TNC

Ball pick-up

Full graphite frame. Designed for mini court or racquet ball play. Ideal for school or private use.

Tennis net cable

Holds approximately 80 balls. Retrieve balls by pressing basket on top of ball. Converts to a ball stand by reversing handles. Ideal for tennis coaches, clubs and schools. BL

Gold eye bolt and loxon Centre strap tie down.

TRN1

KIT

Tennis rebound net Rebound system, 2.0m x 2.0m adjustable frame supplied with net and net attachments. Ideal for use on tennis courts instead of a hit-up wall. Replacement nets available (TRN2).

CS1

Adjustable centre strap

TCPL

Made from heavy duty ‘seat belt’ material with stainless steel clip.

Tennis court plastic lines

HCB

Mini Court balls Pressureless balls used especially for mini court play. Pack of three (3).

Replacement tennis net cable. White PVC coated 6mm galvanised steel cable. Suitable for all types of tennis nets. F1

Net post flanges Flanges cover ground sleeves giving a neater court appearance. Flanges simply slide over the end of Grand Slam tennis posts and are held in place by the height stop on the post. Available in a range of colours.

Tennis court line marking kit (NPL 100 x 4.5mm galvanised flathead nails sold separately). Used to permanently mark clay, deco or similar tennis courts. Saves constantly marking courts with paint or powder. Instructions included.

GRAND SLAM SPORTS EQUIPMENT 33


Tennis: Court cleaning ACS

Aussie Clean Sweep

ACS

Grooms your tennis court to perfection. Removes pine needles, sticks, stones and leaves with minimum effort. Suitable for all surfaces including synthetic grass, clay, asphalt and Synpave. Court can be groomed in minutes due to the large 2400mm wide surface cover. Three year warranty. DCS1

KIT

Dry Court squeegee Lightweight construction with durable wheels. Dries courts and any other relatively hard and flat surface faster than any other roller-type squeegee. No scraping or damage to surface. Fully adjustable rubber. One spare rubber also included. Ideal for clubs, schools and home use. GLS

KIT

Grass and leaf sweeper Fully adjustable rotary broom system. Removes leaves, grass and sticks with ease. Net in handle catches unwanted material and is easily removed for cleaning. Ideal for grooming all types of tennis courts, backyards, driveways and lawns. FBB-600

Firm bristle broom: 600mm wide Suitable for grooming synthetic grass and other court surfaces. FBB-1800

Firm bristle broom: 1800mm wide Suitable for grooming synthetic grass and other court surfaces quickly. CR

Court roller 100 litre capacity water-filled heavy duty plastic roller. Ideal for levelling and compacting deco, clay and grass and other sporting surfaces. Weight when filled is approximately 100kg. Ideal for schools, clubs and private use.

DCS1

KIT

FBB-600

34 GRAND SLAM SPORTS EQUIPMENT

GLS

CR

KIT


Tennis: Nets and winders

See also Nets on page 44.

Reference guide: Tennis net winder parts CODE

International net winder (brass)

NWIFB

Replacement brass winder (complete kit)

NWIF

Replacement face plate

NIWB

Replacement brass handle International net winder (black, green, or white)

NIWA

Replacement powder-coated brass winder, complete kit

NWA

Replacement powder-coated brass handle

NWIB-WA

Replacement worm

NWIB-CP

Replacement stainless steel circlip

NWC-RP

Replacement roller cap Budget net winders

NWB

Budget (external) winder, anchor hook

NWB2

Budget (external) winder, anchor hook, removable handle Both budget winders are illustrated on page 31.

Nets made or repaired

TN3

Championship net: 760mm drop Grand Slam can create custom nets to meet your specific requirements. Grand Slam can also repair damaged nets (depending on the severity of the problem). All our nets are designed in Australia for Australian conditions and feature: UV-stabilised banding, UV-stabilised cotton thread, and double head banding on all international nets. Call Grand Slam to find out more.

Approximately 12300mm wide. Made from 3mm black braided polyethylene. UV-stabilised PVC vinyl headband. Heavy duty PVC black side bands and bottom band with extra heavy duty stitching on all bands. 6mm PVC coated steel cable. TN3SJPP

Championship net: 760mm drop with double mesh

TN1

TN3

TN2SJPP

TN6

Single mesh

Double mesh

Same as TN3 but with double mesh for the first five rows.

TN1

International net: Full drop

TN4

Approximately 12650mm wide. Made from 3mm black braided polyethylene. Two layers of UV-stabilised vinyl on headband. Heavy duty PVC black side and bottom bands. Extra heavy duty stitching on all bands. 6mm PVC coated steel cable. Flexible side bars.

Tournament net: 760mm drop Same as TN3, but mesh is 2.5mm black twisted twine. TN5

School net: 600mm drop

International net: Full drop with double mesh

Approximately 12300mm wide. Made from 2mm black twisted polyethylene. UV-stabilised PVC headband. Black PVC side and bottom bands. 4mm PVC coated steel cable.

Same as TN1 but with double mesh for the first five rows.

TN6

TN1SJPP

Mini court net: 600mm drop TN2

Same as TN5, but 6700mm wide.

International net: 760mm drop Same as TN1 but with a 760mm drop.

Note: Polypropylene headbands are also available when requested.

TN2SJPP

International net: 760mm drop with double mesh Same as TN2 but with double mesh for the first five rows.

GRAND SLAM SPORTS EQUIPMENT 35


Volleyball: Indoor

VBP105-01

KIT

NEW! VBP105 system

VBP105-02

KIT

VBP105-03

KIT

VBP105-04

KIT

VBP105-05

VBP105

VBP105-01

Floor socket volleyball system

Winch post

This new model is designed to reduce the risk of injury due to its unique spring-loaded, snap-lock, net height adjusting system, which automatically engages at the required preset height. Posts can be set at four heights: 2430mm, 2350mm, 2240mm and 2150mm. When posts are being used in a combination configuration, each net height may be adjusted independently for various age and gender groups. All models are constructed from light weight heavy duty materials designed to meet international standards. Main uprights are made from 50mm x 100mm SHS. The base of each post converts to 50mm NB pipe to suit floor sockets IS100, IS110, IS120 and AC120. Posts are designed to withstand a net tension of 685N. There are five types of posts in the VBP105 range:

KIT

Single court, single winch system. Features as per VBP105. VBP105-02

KIT

Anchor post Single court, single winch system. Features as per VBP105.

VBP105 KIT Consists of VBP105-01 winch post and VBP105-02 anchor post. VBP105DW KIT Consists of VBP105-01 winch post and VBP105-04 reverse winch post. Similar features to VBP105, but double winch international system.

Multiple courts, single winch system. As per VBP105 but used for multiple courts. Single winch system.

Please contact Grand Slam or refer to www.grand-slam.com.au for VBP105 Volleyball post information sheet for details on floor sleeves and padding requirements.

VBP105-04

Volleyball umpire stand

VBP105-03

KIT

Centre post: one winch

KIT

Reverse winch post Single court, double winch system. As per VBP105 but used for multiple courts. Double winch International system in conjunction with VBP105-01. VBP105-05

KIT

Centre post: double winch Multiple courts, double winch system. As per VBP105 but used for multiple courts. Double winch system.

36 GRAND SLAM SPORTS EQUIPMENT

VBU-03

KIT

Volleyball umpire stand Collapsible, fixed height umpire chair. Made from high-tensile 25mm SHS galvanised steel, powder-coated. Step-up design, steel platform, transportable wheels.

KIT


NEW! VBP115 system

VBP115-01

NEW! VBP025 system

VBP115-02

KIT

KIT

VBP115-03

KIT

VBP115-05

VBP115

VBP025

T-base volleyball system

Wall-mounted volleyball system

Similar to VBP105, but with a T-base. Anchor system depends on floor type — please advise when ordering. There are five types of posts in the VBP115 range:

Can be mounted directly to the wall on both sides of a building where space is limited. Similar winch and adjustable slide system as VBP105. There are three types of posts in the VBP025 range:

VBP115-01

KIT

KIT

T-base winch post

VBP025-01

Single court winch post.

Wall-mounted winch post

VBP115-02

VBP025-02

KIT

T-base anchor post

KIT

KIT

Wall-mounted anchor post

Single court anchor post. VBP025-03 VBP115-03

KIT

KIT

VBP025-03

Wall-mounted reverse winch

KIT

T-base centre post: one winch Centre winch post, multiple courts. VBP-115-04

KIT

Please contact Grand Slam or see www.grand-slam.com.au for more information.

T-base reverse winch post Reverse winch post (not illustrated). VBP-115-05

KIT

T-base centre post: double winch Centre post, double winch system.

VBP025-01

KIT

VBP025-02

KIT

GRAND SLAM SPORTS EQUIPMENT 37


Volleyball: Indoor

See also Protective padding on page 46.

VBP105-01

GPP21A

VBP110

VBA

VBAP

VBUSID

VBP 110

KIT

Adjustable telescopic volleyball post system Heavy duty lightweight construction to international standard. Main upper slide is 65 x 3mm SHS. Fixed section is made from 75 x 4mm SHS. Base of post converts to 50NB pipe to suit sockets IS100, IS110 and IS120. All rollers and hooks are fitted to allow tensioning of top and bottom cables. Two winches supplied.

VBP112

KIT

International conversion kit One winch and pulley converts model VBP104 to VBP110.

CODE

DESCRIPTION

GPP21A

Volleyball post padding Winch pad only. Suits models VBP104, VBP105-01, VBP105-03 and VBP105-04, winch side only. Also suits models VBP110, VBP111 and VBP115-01 winch posts.

VBA

Volleyball antennae Red and white striped volleyball antennae.

GPP21AA

VBAP

Antennae pockets

GPP21AB

Adjustable telescopic volleyball post system

VBUSID

As VBP110 but supplied with one winch only for tensioning top cable. Ideal for clubs and schools. This model can be converted later into a full international system if required (see VBP112).

International standard umpire stand with variable height adjustment. Made from high-tensile 25mm SHS galvanised steel, powder-coated. Step-up design, plywood platform, transportable wheels.

VBP111

VBUSID Padding

KIT

Volleyball umpire stand

Single centre post with winch

Volleyball umpire stand padding

Can be used with model VBP104 (sold separately), if space is limited between courts.

25mm thick vinyl covered wrap-around padding to suit VBUSID umpire chair.

38 GRAND SLAM SPORTS EQUIPMENT

Volleyball post padding Includes winch pad and non-winch pad. Suits models VBP104, VBP105 and VBP115 posts.

KIT

KIT

Volleyball post padding Suits models VBP110 and VBP105DW with two winches (two winch pads supplied).

Antennae pockets to suit VBA. VBP104

Reference guide: Volleyball post padding

GPP21B

Volleyball post padding Suits non-winch-side models VBP104, VBP105-02 and VBP115-02 posts.

GPP21C

Volleyball post padding Two piece pad. Suits double-winch posts, models VBP105-05 and VBP115-04.


Volleyball: Outdoor

See also Protective padding on page 46.

VBP103

VBP106

VBP107

VBP102

VBP104OD DW

Medium duty volleyball posts

Adjustable telescopic volleyball post system

high and is made from heavy duty 17mm formply. Staggered step design. Ideal for clubs and schools.

As above but with two winches for tensioning top and bottom cables.

VBUSBCH

Medium duty 65mm square posts with single fixed height hooks for net cord tie points. Suits sleeves CFSS70 (sleeves extra).

KIT

Beach volleyball umpire stand VBP106

VBP103

Combination system

Heavy duty volleyball posts

75mm square posts suitable for tennis, badminton and volleyball. NWB budget net winder (shown) not included. Suits sleeves CFSS80 (sleeves extra).

Heavy duty 75mm square posts with double fixed height hooks for net cord tie points. Suits sleeves CFSS80 (sleeves extra).

VBP107 VBP104OD

KIT

Adjustable telescopic volleyball post system Heavy duty lightweight construction to international standard. Main upper slide is 65mm x 3mm SHS. Fixed section is made from 75mm x 4mm SHS. Suits sockets CFSS80. Top roller and hooks are fitted to allow winch tensioning of top cable and tie off points for bottom ropes. One winch supplied.

VBUS

Same features as VBUS, but 2600mm high, so that the base may be buried in sand. VBBS

KIT

Volleyball beach kit Comes complete with poles, ball and net in a handy carry-bag.

Heavy duty SDW37 design Heavy duty 90mm galvanised steel, powder-coated in white with double hooks for junior or senior competition. Posts are removable and supplied with galvanised sleeves and caps. VBUS

Outdoor volleyball umpire stand Made from heavy duty 27mm galvanised steel pipe, powder-coated in durable black polyester. Total height 2300mm, width 800mm and length 1300mm. Foot stand is 1550mm

GRAND SLAM SPORTS EQUIPMENT 39


Court Curtains: Indoor

CDC2

See also Winches on page 57.

GSI

Divider curtains are the perfect solution for multi-functional sports areas. Grand Slam can tailor a variety of retractable curtain systems to meet your needs.

Vertical lift curtains These are the perfect solution when superior appearance is required. Vertical lift curtains store neatly in the ceiling when not in use and cannot be damaged while in this position.

CDC1

Curtains can be supplied in either vinyl and net, or net only. The vinyl section is normally 2000mm high and is made from heavy duty ‘rip stop’ material. Netting can be supplied in either 50mm square white nylon or 45mm square black polyethylene. Standard netting height is 4800mm. CDC2

Side drawn curtains Side drawn curtains are an economical alternative to vertical lift curtains, as they can be drawn across manually — eliminating the cost of an electric winch. Curtains can be stored against one or two walls (if using split curtains).

Curtain operation systems Dividing curtains can be operated by: • Manual draw cord • Manual winch • Winch and electric driver or • Secure key-operated winch. Please call Grand Slam to discuss your particular requirements.

GSI

Indoor court curtains

GSI

Vertical lift automated system: Vinyl and net Brackets fixed at approximately 1400mm centres to portal frame truss or special beam supplied if fixing points are unavailable. A rail system is fitted between brackets to allow both forward and reverse movement of the winching trolley. Nylon rollers are fitted to each bracket; 3mm diameter braided polyester rope is threaded from base of curtain through netting over each pulley and back to trolley system. Rail system supports trolley which raises and lowers the curtain. Trolley system has a special safety jamming

40 GRAND SLAM SPORTS EQUIPMENT

device which engages if cable is broken eliminating any danger of injury. Netting is manufactured from 50mm square x 1.6mm diameter white nylon sports mesh fixed at top to a 21mm diameter pipe with vertical ropes connected to each support bracket to hold the top of the net evenly. The bottom of the sports mesh is attached to a two metre high section of heavy duty ‘rip stop’ vinyl. The bottom of the vinyl has a 34mm diameter pipe stitched in to hold the net evenly on the floor when the curtain system is in the down position. Supporting beams or fixing points must be very strong to take the weight of this curtain system. The total weight of the curtain is approximately 9kg per lineal metre — including tracking system. Note: Winches must be ordered separately. All vertical lift net curtain systems can also be supplied without vinyl if required. (See CDC4 in Price list.)

CDC3A

GSI

Side drawn: Vinyl and net Run on an overhead tracking system. Curtains can be split and drawn to each side or made in one piece and drawn to one side only. When curtains are split, a 300mm overlap is allowed when in the closed position. Brackets are positioned on one or both sides of building to store the curtain in the open position. Rollers are positioned at 600mm centres; netting and vinyl are held vertically by two nylon ropes which are attached to each roller. Draw rope operates curtain from one side of building and is tensioned to keep pressure on rope while opening and closing. System can be changed from manual to electric winch if required. Preference to type of operation must be requested before manufacture of system. Total weight including tracking is approximately 7kg per lineal metre. CDC3B

GSI

Side drawn: All net Curtains can be supplied without vinyl in bottom if required. (See Price list.)


Court Curtains: Outdoor

CDC

KIT

Outdoor court curtains and net cages can be manufactured from various types of netting. Grand Slam also supplies a large range of outdoor divider curtains and wind resistant mesh barriers. Call Grand Slam for more information. CDC

KIT

Court dividing curtains

WRN

KIT

Grand Slam Wind Resistant Sports Screen Grand Slam Wind Resistant Sports Screen is an effective, easy to install windbreak (provides up to 70% wind blockage) that also helps reduce glare and eliminates visual intrusion. Made from UV-stabilised polyethylene for long life, sports screen is resistant

to fraying and mildew and is knitted to give superior strength. All edges are double-reinforced. Eyelets are spaced at 500mm centres to distribute the load evenly over the whole screen. Cable ties or springs can be used to fix the screen to a fence. As well as blocking wind, sports screens are an attractive and functional way to buffer noise and reduce visual distractions.

With these adverse elements removed, concentration and level of play improves. All Grand Slam sports screens are made from superior quality materials and represent attention to detail. Perfect for club, school or private use. Standard height 1800mm. Available in green or black.

Grand Slam can also manufacture divider curtains for various other applications including cricket, tennis, golf and baseball. All our sports mesh is UV treated to give a long lifespan both indoors and outdoors. An invaluable product for uninterrupted play on indoor or outdoor courts. Can be edged on all sides with PVC edging and can also be weighted inside the bottom band with galvanised chain. Solid brass eyelets are also available. Cable and cable fittings can be added. Available in various lengths and sizes.

WRN

KIT

GRAND SLAM SPORTS EQUIPMENT 41


Line markers

Spray nozzle

GSLMD (shown with marking disc and pneumatic tyres)

PLM3

LMP NT GSLMD EA

GSLMD

Grand Slam Deluxe battery operated line marker A professional line marker for a multitude of uses. This model comes with a large heavy duty 30 litre plastic tank which avoids constant fill-ups when marking large areas. A 12-volt battery powers the large capacity self-priming pump motor (heavy duty batteries can give hours of trouble free line marking before recharging). Machine is operated by a single activated on/off switch. Solenoid valves are used in conjunction with spray nozzles to give a quick fluid cut-off at the spraying point. The main suction line has a special fitting which unclips for insertion of a standard hose connection for ease of cleaning of the pump and nozzles. Machine can be supplied with pneumatic or semi-pneumatic wheels depending on the of type of surface to be marked.

MD 50–100

Can also be adapted to accurately mark line widths from 50mm to 100mm; multiple line mark sports fields — saving hours of time — and can be used as a compact boom sprayer for fertilisation and weed control. Note: Due transport regulations this item cannot be shipped with a battery.

CBA

variable flow control. Prolongs pump life by reducing pump pressure.

LMP

width 50mm. Popular with schools and clubs.

MD 50-100

LMP

Multi-use marking discs

Line marking powder

Variable width marking discs can be changed from 50mm wide to 100mm wide in a simple quick operation. Ideal for neat crisp lines or when paint spray drift is a problem.

Line marking powder specifically designed to flow freely, giving consistent crisp lines in all types of powder line markers. 25kg bag. LMP NT 10 litre white

CBA

Compact boom sprayer

MLA

Sports oval line marking paint

Suitable for spraying weedicides and fertilisers. Covers an area almost two metres wide at walking speed. Ideal for treating large areas quickly.

Multi-line attachment Perfect for marking athletic tracks where more than one line is required. Attachment comes complete with on/off valves so that one, two or three lines can be marked at the one time.

Ideal for marking grass, clay and dirt surfaces. Can be mixed 1:1 with water. Gives bright, long-lasting lines to most surfaces. Environmentally friendly, will not damage grass surfaces. Suits most types of wet spraying machines.

PT 250

LMP NT 15 litre black

Pneumatic tyres

Turfmaster concentrate line marking paint

GSLMD EA

Offset extension arm This extension arm allows the sprayer or spray marking disc to be positioned to one side for visibility. Alleviates the problem of walking on wet paint when marking centre lines.

Four pneumatic tyres to suit GSLMD. PLM3

Dry powder line marker (large) GSLMD PA

Pump agitator Agitates the marking mix and provides

42 GRAND SLAM SPORTS EQUIPMENT

Holds a full bag of line-marking powder. Distributes powder at a brisk walking speed. Comes with hinged lid. Line

Similar to Sports oval line marking paint but in a concentrated form. Can be mixed with water up to 5:1 (one 15 litre container can mix up to 100 litres of marking paint). Saves transport costs. Economical, safe and user-friendly.


Multi-use goals

DMUG

MPG

DMUG

See also Protective padding on page 46.

KIT

KIT

KIT

HB112

KIT

HB112

KIT

MGRN

KIT

MGRN

PH

KIT

Deluxe multi-use Futsal goal

Deluxe handball goal

Multi-game rebound net

Deluxe multi-use goal 3000mm wide x 2000mm high x 900mm deep. Goal face is made from heavy duty 50mm SHS; sides are heavy duty 35mm SHS. The sides of this goal are fully collapsible so that the goal can be stored away neatly when not in use. Powder-coated for durability. Supplied with heavy duty net.

Deluxe handball goal 3000mm wide x 2000mm high x 1300mm deep. Main frame is 80 x 80 x 3mm special RHS aluminium section with built-in net hooks. Base and back bar is 76mm x 38mm x 2mm RHS aluminium with special net hook system. Sides are 25mm ERW galvanised tube. The back bar is easily removed so that the sides can be folded in against the main frame, making the goal easy to store when not in use. Powdercoated for durability.

An excellent training tool designed to improve reflexes for many sports, such as basketball, netball, soccer, volleyball, etc.

Note: Lockdown plates and anchor pegs must be installed in the play position to comply with AS4866. 1–2007 with variations outlined in consumer protection notice No 28 of 2010. Lockdowns, lockdown bolts, floor plates, anchors are not included. Please consult Grand Slam for type of lockdown required.

Note: This goal can be supplied with FP110 floor plates and LD110 lock down bolts for fixing to timber floors if required. MPG

KIT

DMUG-NET

Multi-purpose goal

Heavy duty Futsal goal net

Multi-purpose goal measuring 2800mm wide x 2000mm high x 1200mm deep. Made from 40mm OD powder-coated tubing. Supplied with white net. Ideal for backyard use and schools.

Heavy duty black 44mm x 3mm hexagonal mesh. Size: 3100 wide x 2050 high x 1000mm deep. Ideal for senior, club and school competition.

Other goals made to order Grand Slam can make any type of goal to order. Call Grand Slam to discuss your requirements.

PHBL PH

Golf putting hole Powder-coated metal hole for golf putting practice on synthetic or natural grass tennis courts. May also be used on other surfaces.

SCS100R

GRAND SLAM SPORTS EQUIPMENT 43


Nets

Badminton

BNT 2212

Nets made or repaired Grand Slam can create custom nets to meet your specific requirements. Grand Slam can also repair damaged nets (depending on the severity of the problem). All our nets are designed in Australia for Australian conditions and feature: UV-stabilised banding, UV-stabilised cotton thread, and double head banding on all international nets. Call Grand Slam to find out more.

Soccer

Hex 3.0mm

BNT 2212

SPT-200-01

SPT-335-01

Competition net

Senior international

Senior international

6100mm x 760mm x 20mm nylon 210 d-ply. PVC headband, 4mm polyethylene headline.

Suits P-shaped soccer goals SG101G-SEN, SG101P-SEN and SG200A only. Deluxe heavy duty senior international net. Hexagonal mesh; white 3.0mm. Size: 7420mm wide x 2600mm high x 900mm deep at top x 1850mm deep at base. For professional, club and school use.

Suits full-framed soccer goal SG300A only. Deluxe heavy duty senior international net. Hexagonal mesh; white 3.5mm. Size: 7420mm wide x 2600mm high x 900mm deep at top x 1850mm deep at base. For professional, club and school use.

Futsal

SPT-300-02-U12 SPT-235-01

Junior heavy duty

Senior international

Suits full-framed soccer goal SG300AU12 only. Deluxe heavy duty junior international net. Hexagonal mesh; white 3.0mm. Size: 5100mm wide x 2100mm high x 900mm wide at top x 1850mm deep at base. For professional, club and school use.

Suits P-shaped soccer goals SG101G-SEN, SG101P-SEN and SG200A only. Heavy duty senior international net. Hexagonal mesh; white 3.5mm. Size: 7420mm wide x 2600mm high x 900mm deep at top x 1850mm deep at base. For professional, club and school use.

Sports netting A large range of various styles of bulk sports net is also available. Call Grand Slam for more information.

SPT-200-02-U12

Net materials (shown below) 1. 50mm square, 1.8mm diameter twisted nylon sports mesh. 2. 25mm square, 72 ply, twisted polyethelene. 3. 45mm square, 2mm diameter twisted polyethelene. 4. Industrial strength tapes and twines.

1

SPT-400

Senior international

Sports nets and court curtains Basketball nets, see pages 16, 17. Cricket nets, see page 18. Netball nets, see pages 22, 23. Soccer nets, see pages 28, 29. Court curtains: Indoor, see page 40. Court curtains: Outdoor, see page 41.

Hex 3.5mm

Junior heavy duty

DMUG-NET

DMUG-NET

Deluxe heavy duty Futsal goal net Heavy duty black 3mm x 44mm hexagonal mesh. Size: 3100 wide x 2050 high x 1000mm deep. Ideal for senior, club and school competition.

2

44 GRAND SLAM SPORTS EQUIPMENT

Suits P-shaped soccer goals SG101G-U12, SG101P-U12 and SG200A-U12 only. Heavy duty junior international net. Hexagonal mesh; white 3.0mm. Size: 5100mm wide x 2100mm high x 900mm deep at top x 1850mm deep at base. For professional, club and school use. SPT-300-01

Senior international Suits full-framed soccer goal SG300A only. Deluxe heavy duty senior international net. Hexagonal mesh; white 3.0mm. Size: 7420mm wide x 2600mm high x 900mm deep at top x 1850mm deep at base. For professional, club and school use.

3

Box-shaped international net suits SG400A only. Heavy duty senior international net. Hexagonal mesh; white 3.0mm. Size: 7420mm wide x 2600mm high x 2000mm deep at top x 2000mm deep at base. For professional, club and school use. SPT-435

Senior international Box-shaped international net suits SG400A only. Heavy duty senior international net. Hexagonal mesh; white 3.5mm. Size: 7420mm wide x 2600mm high x 2000mm deep at top x 2000mm deep at base. For professional, club and school use.

4


Tennis

Volleyball

TN1

TN3

VPT 454IC

VPT 091E

TN2SJPP

TN6

VPT 304S

VPT 1818

Single mesh

Double mesh

VPT 181E

VPT BEACH

TN1

International net: Full drop Width approximately 12650mm. Made from 3mm black braided polyethylene. Two layers of UV-stabilised vinyl on headband. Heavy duty PVC black side and bottom bands. Extra heavy duty stitching on all bands. 6mm PVC coated steel cable. Flexible side bars.

and bottom band with extra heavy duty stitching on all bands. 6mm PVC coated steel cable. TN3SJPP Same as TN3 but with double mesh for the first five rows. TN4

VPT 454IC

VPT 1818

Championship net

Rebound net

9500mm x 1000mm x 100mm, 2.5mm polyethylene twisted mesh, double PVC head band, PVC side bands and bottom band, 6mm steel cable headline. Reinforced sides, flexible side sticks and white PVC pockets for antennae.

5500mm x 1000mm x 100mm, 18 ply polyethylene twisted PVC head band, side band and bottom band.

Tournament net: 760mm drop TN1SJPP Same as TN1 but with double mesh for the first five rows.

Same as TN3, but mesh is 2.5mm black twisted twine. TN5

TN2

School net: 600mm drop

International net: 760mm drop

Width approximately 12300mm. Made from 2mm black twisted polyethylene. UV-stabilised PVC headband. Black PVC side and bottom bands. 4mm PVC coated steel cable.

Same as TN1 but with a 760mm drop. TN2SJPP Same as TN2 but with double mesh for the first five rows.

TN6 TN3

Mini court net: 600mm drop

Championship net: 760mm drop

Same as TN5, but 6700mm wide.

Width approximately 12300mm. Made from 3mm black braided polyethylene. UV-stabilised PVC vinyl headband. Heavy duty PVC black side bands

Note: Polypropylene headbands are also available when requested.

VPT 304S

VPT BEACH

Beach volleyball net Beach volleyball net with fluorescent pink banding around all edges. Plastic coated cable through top band.

Competition net 9500mm x 900mm x 100mm, 2mm polyethylene twisted, PVC head band, side bands and bottom band, 4mm steel cable headline. VPT 304E

VBA

Volleyball antenna Red and white striped fibreglass antenna for championship nets. Volleyball antenna pockets also available if required.

Club net 9500mm x 900mm x 100mm, 2mm polyethylene twisted PVC head band, 4mm polyethylene head line. VPT 181E

Practice net 9000mm x 900mm x 100mm, 18 ply polyethylene twisted PVC head band, 4mm polyethylene head line.

GRAND SLAM SPORTS EQUIPMENT 45


Protective padding

GPP10

GPP11

Protective padding

In today’s highly litigious environment, it is absolutely essential that all exposed sports equipment be fitted with safety padding. To avoid the chance of personal injury, safety padding must also be installed where columns or other obstructions extend into playing areas or where court run-offs are insufficient. Grand Slam’s professionally trained staff can assess, design and install padding to suit your circumstances.

GPP11C

GPP13

GPP15

GPP15B

GPP15C

General goal post padding

GPP10

Square section: 75mm Ø hole 1800mm high x 280mm square; 75mm diameter internal hole. Suits 60mm to 75mm OD circular profile posts. GPP11

Square section: 115mm Ø hole 1800mm high x 355mm square; 115mm diameter internal hole. Suits 90mm to 115mm OD circular profile posts. GPP11B

All Grand Slam protective post pads are made from high quality, medium density foam with heavy duty wipe clean UV-stabilised vinyl covers. Grand Slam makes all pads in-house to assure only the highest quality.

Square section: 150mm Ø hole Same as GPP11, but with 150mm Ø hole. 1800mm high x 355mm square; 150mm diameter internal hole. GPP11C

Square section: 190mm Ø hole Gymnasium and high jump mats Grand Slam supply an extensive range of gymnasium, high-jump and general purpose mats. All mats are made from compressed, rubberised, or EVA foam. Covers are heavy duty, long-lasting, easily washable vinyl. Contact Grand Slam for more information or visit our website at www.grand-slam.com.au.

46 GRAND SLAM SPORTS EQUIPMENT

Same as GPP11, but with 190mm Ø hole. 1800mm high x 355mm square; 190mm diameter internal hole. GPP12

Square section: 75mm Ø hole 1800mm high x 280mm square; 75mm diameter internal hole. Suits 65mm to 75mm OD circular profile posts.


Protective padding

GPP16

GPP16D

GPP18

GPP19

GPP20

GPP22

Netball

GPP13

GPP15D

GPP18

Round section: 75mm Ø hole

Round section: 190mm Ø hole

Netball post padding (flat)

1800mm high x 200mm OD; 75mm diameter internal hole. Suits 60mm to 75mm OD circular profile posts.

1800mm high x 355mm OD; 190mm diameter internal hole. Suits 165mm and 190mm OD circular profile posts.

GPP14

GPP16

2400mm high x 300mm x 25mm thick. Suits 60mm OD netball and other games posts. Heavy duty vinyl with Velcro straps used for easy installation and removal.

Round section: 75mm Ø hole

Round section: 75mm Ø hole

1800mm high x 280mm; 75mm diameter internal hole. Suits 60mm to 75mm OD circular profile posts.

2500mm high x 200mm OD; 75mm diameter internal hole. Suits 60mm to 75mm OD circular profile posts.

GPP19

GPP15

GPP16B

GPP20

Round section: 115mm Ø hole

Round section: 115mm Ø hole

Netball post padding (round)

1800mm high x 355mm OD; 115mm diameter internal hole. Suits 90mm to 115mm OD circular profile posts.

2500mm high x 260mm OD; 115mm diameter internal hole. Suits 90mm to 115mm OD circular profile posts.

1800mm high x 200mm OD; 100mm diameter internal hole. Suits NB302, NB303, NB304 and NB305.

GPP15B

GPP16C

GPP22

Round section: 150mm Ø hole

Round section: 150mm Ø hole

Netball post padding (flat)

1800mm high x 355mm OD; 150mm diameter internal hole. Suits 125mm to 150mm OD circular profile posts.

2500mm high x 300mm OD; 150mm diameter internal hole. Suits 125mm to 150mm OD circular profile posts.

GPP15C

GPP16D

As per GPP18, but 3000mm high (international specification). 3000mm high x 300mm x 25mm thick. Heavy duty vinyl with Velcro straps used for easy installation and removal.

Round section: 165mm Ø hole

Round section: 190mm Ø hole

1800mm high x 355mm OD; 165mm diameter internal hole. Suits 150mm and 165mm OD circular profile posts.

2500mm high x 340mm OD; 190mm diameter internal hole. Suits 165mm to 190mm OD circular profile posts.

Netball post padding (flat) As per GPP18, but 2000mm high.

Velcro strap attachment

GRAND SLAM SPORTS EQUIPMENT 47


Protective padding Badminton

Volleyball

GPP25B

GPP21A

Badminton padding: Two-piece

Volleyball post padding

1500mm high. Suits BNT102T, BNT103 and BNT104 INT model badminton posts. Wrap-around padding with Velcro attachments. Supplied with separate bottom pad which secures around base of post.

Winch pad only. Suits models VBP104, VBP105-01, VBP105-03 and VBP10504, winch side only. Also suits models VBP110, VBP111 and VBP115-01 winch posts. GPP21AA

GPP26B

Volleyball post padding

Badminton padding

Suits models VBP110 and VBP105DW with two winches (two winch pads supplied).

1500mm high. Suits model BNT105 badminton posts only. Wrap-around padding with Velcro attachments.

GPP21AB GPP27B

Volleyball post padding

Badminton padding: Two-piece

Includes winch pad and non-winch pad. Suits models VBP104, VBP105 and VBP115 posts.

1500mm high. Suits model BNT105D badminton posts only. Two-piece padding with Velcro attachments.

GPP21A

GPP21B

Volleyball post padding Suits non-winch side model VBP104, VBP105-02 and VBP115-02 posts. GPP21C

Volleyball post padding Two piece pad. Suits double-winch posts, models VBP105-05 and VBP115-04 posts.

VBP105-01

GPP25B

Tennis

GPP23

Tennis post: Wrap-around padding 1100mm high x 350mm wide. Suits most deluxe international type tennis posts with internal-type winding system. Single piece design with cut out for winding mechanism. Velcro attachment. GPP24

Tennis post: Wrap-around padding 1100mm high x 150mm OD with 100mm diameter internal hole. Suits budget tennis posts with cranktype winding system with removable or fixed handle.

GPP23

48 GRAND SLAM SPORTS EQUIPMENT

GPP24


Protective padding: Column padding Padding specification

All pads are made from heavy duty, 30mm thick closed cell foam and are covered with blue needle-punched polypropylene carpet. Pads are tailored to suit the size and shape of the structure. The standard height for all safety padding is 2000mm, but pads of other heights can be made on request. Type of fixings vary depending on the shape of the structure. Special shaped pads can also be supplied in foam-covered vinyl. Contact Grand Slam for details. CPP

Flanged column padding Flanged column padding can be made to suit the size and shape of most universal columns. Can be installed by client without the use of any tooling. Pads are simply stretched over outside edges of flange then lock in place. Please specify width and flange thickness of columns when ordering. CPP-360U

U-shaped column padding U-shaped column padding can be made to suit most box-shaped beams. Pads are glued directly to the beam or attached with special fixings. Please specify internal width and depth of pad required when ordering.

CPP

CPP-360U

SCP-100

SCP-200UB

SCP-200UB

Square universal column padding Column padding can be made to suit most universal shaped beams. Inverted sides of column should be boxed with plywood or timber so that padding can be securely fixed. Pads are glued directly to beam and timber block outs or attached with special fixings. Please specify internal width and depth of pad required when ordering. SCCP-200

Semi-circular column padding Can be installed to cover a variety of applications including pipe work, ducting, down pipes, etc. Pads simply wrap around and are glued directly to beam and wall or attached with special fixings. Please specify internal diameter and depth of pad required when ordering. SCP-200

Square boxed column padding Square column padding can be made to suit the size of most square-shaped SHS beams. Pads can be glued directly to beam or supplied with special fixings. These pads can also be supplied in foam covered vinyl. Contact Grand Slam for further information. Please specify internal width and depth of pad required when ordering.

SCCP-200

SCP-200

RCP-200

RCP-100

REC-CP

GRAND SLAM SPORTS EQUIPMENT 49


Racks and trolleys

MUT 1-3 LHT

MUT 1-3 LHT

MPTROL

MPGT

MT 1

MUT 1

MPGT

Multi-use trolley

Games post and storage trolley

Manufactured from high-tensile 25mm SHS with 50mm square galvanised mesh. Large 200mm semi-pneumatic wheels on rear and swivel wheels on the front. Measures 910mm high x 1650mm long x 1105mm wide. Ideal for carrying hurdles, balls, plastic bins and a multitude of equipment. Can be supplied with a lockable hinged top (see MUT 1-3 LHT).

Ideal for transporting games posts and other ancillary equipment in gymnasiums and across other level areas. Two-tiered model made from heavy duty materials to take a load of up to 250kg. Fitted with four universal lockable wheels. Dimensions: 1000mm high x 1500mm long x 600mm wide. Plywood floor in base for carrying balls, bins and mats also included.

KIT

MPTROL

Multi-use trolley

Multiple-use equipment trolley

As MUT 1, but 765mm high x 1400mm long x 1010mm wide. Ideal for carrying a multitude of equipment.

For moving games posts, balls and a variety of sporting and ancillary equipment. Can be used on various hard surfaces. Trolley comes complete with bottom storage rack that can hold three plastic storage bins (bins illustrated in photo are not included). The middle storage rack holds about 14 large basketballs. The top rack has a 50mm square mesh cover for carrying a variety of equipment. Games posts are carried by the two top supports and other types of

MUT 1-3 LHT

Multi-use trolley: lockable top As MUT 1, but with a lockable top. Dimensions: 765mm high x 1650mm long x 1010mm wide. LHT

Lockable hinge top Suits all multi-use trolleys.

50 GRAND SLAM SPORTS EQUIPMENT

KIT

KIT

equipment can be hung off hooks at either end. Ideal for schools and clubs. MT 1

KIT

Mat trolley: 1800mm long Used for transportation of mats. Sturdy steel frame. Supplied with four swivel wheels, 17mm plywood floor and removable swivel handle. Ideal for both indoor and outdoor use. Size: 1800mm long x 1200mm wide. MT 2

MUT 1-2

KIT

KIT

BCB 1

Mat trolley: 2400mm long Same as MT 1, but 2400mm long x 1200mm wide. MT 3

KIT

Mat trolley: 3600mm long Same as MT 1, but 3600mm long x 1200mm wide.

Custom made trolleys A variety of wheels, including pneumatic wheels for grassed areas, can be supplied on all trolleys. Contact Grand Slam for custom made trolleys.

BCB HD


Racks and trolleys

SRV 140

SRV 100

PBC 32

PBC 48

SRV 130

MUT 1

MUT 1-2

BCB 1

SRV 140

RBC

Ball carry bag

Storage rack: two T-base posts

Roll bin ball carrier

25mm white nylon mesh.

Wall bracket with pins spaced to suit T-base badminton or volleyball posts.

This vertical ball carrier maximises your storage area. Balls dispense from the base of the unit. Holds up to 40 balls. Made from high-tensile 25mm square tubing. Supplied with 200mm semipneumatic rear wheels and swivel front wheels. Designed for gymnasiums and outdoor courts.

BCB HD

Heavy duty ball carry bag

SRV 150

45mm square black mesh.

Storage rack: four T-base posts As SRV 140 but for four posts.

SRV 100

Vertical storage rack: two posts

PBC 16

One wall bracket complete with clamping assembly for two posts and floor protection bracket to hold posts in the vertical position.

Portable ball carrier Manufactured from 25mm lightweight galvanised steel tubing with knock-in swivel castors. Holds 16 basketballs or approximately 20 soccer balls.

SRV 110

Vertical storage rack: three posts

PBC 24

As SRV 100 but for three posts.

Portable ball carrier

SRV 120

As PBC 16 but holds 24 basketballs or 30 volleyballs.

Vertical storage rack: four posts As SRV 100 but for four posts.

PBC 32

Portable ball carrier SRV 130

As PBC 16 but holds 32 basketballs.

Horizontal storage racks Two wall-mounted brackets for storing games posts horizontally.

PBC 48

Portable ball carrier As PBC 16 but holds 48 basketballs.

RBC

GRAND SLAM SPORTS EQUIPMENT 51


Scoreboards Grand Slam can supply and install a large range of electronic scoreboards, shot clocks and ancillary equipment to suit a variety of sports, including basketball, netball, baseball, softball, hockey, rugby, Australian rules and cricket.

Features • plug-in circuitry for easy maintenance • easy to operate • control panel can be unplugged for security and storage • microprocessor control for reliability • high performance, maintenance-free digital displays • shot timer compatible, links with all indoor models • fifteen year back to base warranty • all Australian made.

hardware and socket. Ideal for netball, handball, futsal, and hockey. SB2

Electronic scoreboard: 700mm high x 1200mm wide Displays time and scores: 190mm red; fouls: 170mm green; time out: 130mm yellow; time out request: yellow arrow; period: 130mm blue; substitution indicators: blue dot. Black powdercoated sheet steel case, steel tube inner frame. Matt acrylic front, white stickers. Supplied with cabled CC6 controller, mounting hardware and socket. SB3

Electronic scoreboard: 1000mm high x 1500mm wide

SB1

Displays time: 200mm dual row red; score: 190mm single row red; fouls: 170mm green; time out: 130mm yellow; time out request: yellow arrow; period: 130mm blue; substitution indicator blue dot. Black powdercoated sheet steel case, steel tube inner frame. Matt acrylic front, white stickers. Supplied with IA-CC10 cabled controller, cable, siren, mounting hardware and socket.

Electronic scoreboard: 600mm high x 900mm wide

Stadia 3

All systems described can be supplied with a radio remote control upgrade. Other types of indoor and outdoor scoreboards are available on request. Call Grand Slam for more information. Unless otherwise noted, no data cable is supplied with these systems.

Electronic scoreboard: 1000mm high x 2500mm wide

Displays time and scores: digits 190mm high red. Portable indoor/ outdoor. Supplied with hand held remote, cable, siren, mounting

Displays time: 200mm high red; score: 190mm red; fouls: 170mm green; time

out: 170mm yellow; period: 135mm blue; time out request arrows: yellow; substitution indicators: blue; five on court player numbers: 135mm yellow digits. Supplied with cabled controller, cable, siren, mounting hardware and socket.

Stadia 7 T

Electronic scoreboard: 2160mm high x 2800mm wide As above, but add team name panel. Supplied with two CC6 control consoles. Stadia 7 TM

Electronic scoreboard: 2410mm high x 2800mm wide

Stadia 4

Electronic scoreboard: 1000mm high x 1500mm wide Displays time: 200mm red; score 190mm red; fouls 170mm green; time out: 130mm yellow; period 130mm blue; time out requests: yellow arrow; substitution indicators: blue dot. Team name panel: 120mm dot matrix, seven characters per team. Supplied with cabled controller, cable, siren, mounting hardware and socket.

As all of the above, but add moving message sign at the bottom. Supplied with one notebook PC and one CC6 control console.

Shotclocks SC190

Shot clock: 190mm high digits Single row digits.

Stadia 7

SC200

Electronic scoreboard: 1950mm high x 2800mm wide

Shot clock: 200mm high digits Dual row digits with end game light.

Interchangeable CC6 control consoles for scoreboard and player boards. Two twelve player number and foul boards: 125mm yellow, green and red; clock digits: 260mm red; score digits (to 199): 200mm red; foul digits: 200mm green; time out digits: 200mm yellow period digit: 190mm blue; substitution dots: blue; time-out request arrows: yellow; team foul penalty indicators: red; possession arrow: red. Supplied with two IA-CC10 control consoles.

SC260TD

Shot clock: 260mm high digits Dual row digits with game time and end game light. SC330TD

Shot clock: 330mm high digits Dual row digits with game time and end game light.

T / O

T / O

A Light A Light

B Dark

P

B Dark

Team Fouls N2829

SB1

Pn Pf

SB3

T / O

T / O

Pn Pf SC190

A Light

P

B Dark

Team Fouls

SC200

N2829

Stadia 3

52 GRAND SLAM SPORTS EQUIPMENT


Scoreboards

Pn Pf Pp

Pn Pf Pp

Stadia 7

Stadia 7 T

Stadia 7 TM

POSSEESSION Scores

PERIOD

Team Fouls

Time Outs IA-7

N2829

Score benches Grand Slam manufactures a large range of durable, fully demountable score benches. All framework is 25mm galvanised powder-coated SHS, covered in heavy duty MDF. Bench tops are made from white HMR melamine for easy cleaning. All score benches are equipped with good quality lockable, non-marking urethane wheels. Score benches can also be equipped with optional bench indicator modules: • time-out request arrows • substitution request indicators • team foul indicators • possession arrows. Each of these indicators is controlled via the IA-CC10 control console, not manual switches, allowing the console operator to display indicators when required, quickly and easily. Indicator modules are recessed into the face of the score bench behind

matt perspex. Scoreboards can be built into the face of any score bench. Call Grand Slam for more information. SBCH02

KIT

Score bench 2 person 1200mm wide SBCH03

KIT

Score bench 3 person 1800mm wide SBCH04

KIT

Score bench 4 person 2400mm wide SBCH05

KIT

Score bench 5 person 3000mm wide SBCH06

KIT

Score bench 6 person 3600mm wide

SBCH06

KIT

(with optional Sub, Possession and Time out displays)

See more at www.grand-slam.com.au GRAND SLAM SPORTS EQUIPMENT 53


Sleeves and caps: Indoor

IS110

IS115L

AC120

AC120 with acrylic inlay

Concrete floors Caps and sleeves

Timber floors Accessories

Floor plates and sleeves

IS110

CSR170

Floor sleeve with removable centre: 62mm ID

Centre stem remover

Galvanised steel pipe 250mm long x 62mm ID with removable centre section for cleaning when required. Centre section also acts as a safety device, eliminating the danger of open holes. Suits most 60mm OD posts (except netball). IS115L

Floor sleeve with internal stem: 62mm ID As IS110 but the sleeve has a locking lug on the rear of the sleeve which sets models NB310 and NB311CF netball posts at the correct playing position. AC120

Access cover plate and sleeve combination

AC100 with timber inlay

Removes centre stems on models IS100, IS110 and IS115L for cleaning when necessary.

FLDA-16mm M16 Anchor 65mm long with 16mm thread. Suits M16 D-shackle anchor: DSA-16mm. SLLD

Spring-loaded lockdown: 22mm OD

DSA-16mm

D shackle anchor Used for securing cables or chains on sporting and gymnastics equipment. FPLD-12mm 10mm thick floor plate with two 13mm holes drilled through plate and 25mm solid round section welded to plate with 12mm threaded hole to take LDB100 supplied with BB748 model basketball structures. FPLD-12mm comes with 12mm anchors and Chemset capsules. FPLD-12mm is mounted directly onto concrete below AC100 access cover plate system.

Used to secure models BB748, NB307, NB307A, VBP115, all MUE portable goals to concrete, vinyl and plastic floors. Lockdown is chemically set into the concrete floor. A springloaded cap in the centre of the lockdown prevents debris entering the hole when not in use. Ideal for buildings where sleeves cannot be fitted.

Note: Floors must be very strong to support tensioned posts (e.g. volleyball). It is advisable to use this sleeve system in conjunction with model IS130 or IS140.

Floor sleeve: 62mm ID Galvanised steel pipe 250mm long x 62mm ID with one end covered. Cast into concrete floors before installation of timber floor. Used with AC100 access cover plates, which are set in timber floor directly above sleeves. Suits most 60mm OD posts (except netball). IS120L

Floor sleeve: 62mm ID As IS120, but with a locating lug on the back of the sleeve for netball. Can also be used to house other type games posts if required.

Note: Locating hole for netball positioning lock can be drilled into this model if required. Also available in stainless steel for outdoor use, AC120SS.

IS130

Floor sleeve: 79mm ID Galvanised steel pipe 250mm long x 79mm ID with one end covered. Cast into concrete under timber floor to support IS100 floor sleeves or heavy duty games posts.

AC120L

Access cover plate and sleeve combination

54 GRAND SLAM SPORTS EQUIPMENT

Galvanised steel pipe 250mm long x 62mm ID with 145mm diameter flange with six counter sunk holes welded to the face of the pipe. Centre stem acts as a safety device, eliminating the danger of open holes, and can be removed for cleaning. Suits most 60mm OD posts (except netball).

IS120

Combination of AC100 access cover plate and IS120 x 62mm ID sleeve. Sleeve and cover plate are cast flush with the top of the concrete floor. The cover plate has one flush side and one inverted side (which may be filled with synthetic compound to match floor if desired). Suits most 60mm OD posts (except netball).

As above but supplied with locking lug for netball. Can also be used to house other type games posts if required.

IS100

Flanged floor sleeve: 62mm ID

CSR170

SLLD


Sleeves and caps: Indoor

AC100

IS120

IS120L

IS140

Floor sleeve: Any length

FP120 Keyhole floorplate

As IS130 but can be supplied in any length under suspended timber floors on bearers. Used with IS100 sleeves or heavy duty games posts.

Floor plate with pivoting hook

FP110

Floor plate with M12 thread Floor plate 110mm zinc plated round steel plate, has six counter-sunk holes for securing to timber floors. Also has M12 threaded hole centre. Used in conjunction with LDB100 for securing various types of games posts.

FP125

Floor plate with lift up eye Floor plate 110mm x 4mm thick zinc plated round steel plate, has six counter-sunk holes for securing to timber floors. Special counterbalancing eye hinges down when not in use. Used when loads are vertical (e.g. climbing walls etc).

FP100 110mm round zinc-plated steel plate with six counter-sunk holes. Hook is 8mm thick and is over-balanced so that it will sit flush with floor when not in use. Ideal for supporting chains on cable support systems.

AC100

IS100

FP120

Cap is recessed on one side to take flooring material. For access to games sleeves under floor. LDB100

Threaded M12 lockdown bolt Threaded M12 lock down bolt with plastic knob. Length of bolt supplied depends on type of games posts being secured.

FP130

Threaded eyebolt

ACPR130

M12 threaded eyebolt. Suits FP110 floor plate.

Suction cup

FP115

Floor plate with lift up hook

FP140

Floor plate 110mm x 4mm thick zinc plated round steel plate with six counter-sunk holes for securing to timber floors. Hook is over-balanced so that it will sit flush with floor when not in use. Used when loads are on an angle. Suitable for chain attachment type equipment.

Hook and rivet anchor

Suction cup used for removing AC100 cover plates to allow access to sleeves.

Suits FP120 floor plate. 10mm diameter hook welded to flat steel plate which has steel headed rivet protruding under plate. Locks into FP120. AC100

Access cover plate Internal cap 129mm, access hole 120mm. Outer plate 145mm OD.

FP120

Floor plate with keyhole Floor plate 110mm zinc plated round steel plate, has six counter-sunk holes for securing to timber floors and has a keyhole in centre. Used for badminton and other indoor games posts.

FP110

FP130

LDB100

ACPR130

GRAND SLAM SPORTS EQUIPMENT 55


Sleeves and caps: Outdoor Football sleeves

BBGS

BBGSC

SWSV/N

SWST

Refer to Price list for details

CFSR100

SCS100S

CFSR100-HC1

CFSS55

SCS100R

CFSS70

CFSS80

SCS65

SCS75

Reference guide: Outdoor sleeves and caps

Reference guide: Outdoor sleeves and caps

CODE

D E S C R I P T I O N ( P E R PA I R )

CODE

D E S C R I P T I O N ( P E R PA I R )

CFRS60

60mm ID round galvanised sleeves: 500mm long

SCS50

50mm square galvanised caps

Suits 50mm round posts. SCR50

50mm OD round galvanised caps

Suits 55mm ID galvanised square sleeves. CFSS70

Suits 60mm ID galvanised round sleeves. CFSR75

75mm ID round galvanised sleeves: 500mm long

60mm OD round galvanised caps

SCS65

90mm ID round galvanised sleeves: 500mm long

CFSS80

100mm round PVC sleeves: 500mm long

SCS75

100mm round powder-coated caps

SCS100S

CFSS80-HC1

127mm round hot-dipped galvanised sleeves

55mm square galvanised sleeves: 500mm long Suits 50mm square posts.

56 GRAND SLAM SPORTS EQUIPMENT

80mm square galvanised sleeves: 500mm long As per CFSS80, but with a hinged cap to keep debris out of holes. Can be supplied with a slot in the cap so that games posts can be locked to the cap.

Suits most basketball posts. CFSS55

100mm square powder-coated caps Suits 75mm square posts.

Suits 100mm round PVC sleeves or golf holes. BBGS

75mm square galvanised caps Suits 80mm ID square galvanised sleeves.

Suits 75mm square posts. SCS100R

80mm square galvanised sleeves: 500mm long Suits 75mm square posts.

Suits 75mm round posts. CFSR100

65mm square galvanised caps Suits 70mm ID square galvanised sleeves.

Suits 75mm ID galvanised round sleeves. CFSSR90

70mm square galvanised sleeves: 500mm long Suits 65mm square posts.

Suits 60mm round posts. SCR60

HC1

CFSR100-HC1

100mm round galvanised sleeves: 500mm long As above, but 100mm ID round. Suits 90mm round posts. Other hinged capped sleeves can be made on request.


Winches W21

W30-70

W30-70

W24, W24-PWDA, W26

W21

Ratchet type winch Gear ratio 3:2:1. Made from high quality materials and engineered for trouble-free operation and long service. Suits volleyball and other games posts.

Worm-drive winches are self-locking and provide a much greater level of safety than ratchet type winches. This winch must be operated by an electric portable driver and driver attachment (see W24 and W24PWDA).

W27

Remote control Operates W30-70 winch by wireless remote control (the unit can still be operated with key switch).

W24

Portable electric winch driver

W30-70

Ideal for operation of several winches in the one complex. Fast, efficient operation. 750 watt with forward and reverse switch.

Heavy duty, key operated, sensor controlled brake winch

W24-PWDA

Portable winch driver attachment Used in conjunction with W24 driver to operate W26 winch. W26

Heavy duty, worm-drive winch Gear ratio 25:1. Approximately 300kg safe working load. Cable drum holds approximately 14 metres of 5mm diameter steel cable. Winch is fitted with special pinned shaft to take W24-PWDA portable winch driver attachment.

This powerful compact winch is ideal for swing away basketball systems and vertical lift curtains: 0.55kw/240v; 300kg lifting capacity. Motor operates gear reduction unit. Sensor controls operate movement of structure to exacting requirements. All electric switch gear and wiring included. Drum holds approximately 30m of 6mm cable. Key can be removed from control box when not in use. Winch comes in a solid powder-coated steel box and only requires a 240v x 10 amp power outlet for operation.

GRAND SLAM SPORTS EQUIPMENT 57


Order form Please photocopy this page as required. Contact name

Telephone

Email address Organisation Address

Postcode

Product code

Your order number Description

Quantity

Total

Grand Slam Sports Equipment April 2012

19 Deakin St Brendale QLD 4500 Freecall 1800 773 461 Phone (07) 3205 3388 Fax (07) 3205 3522 www.grand-slam.com.au

Unit price

Subtotal

MICHAEL WARD DESIGN 07 3252 8721

Date

2012 Grand Slam Catalogue  

2012 Grand Slam Catalogue, Basketball, Tennis, Soccer

Read more
Read more
Similar to
Popular now
Just for you