Page 1

Our mission: To sell and distribute hose and fluid connectors from a decentralized and customer oriented organization

www.hydroscand.com


Quality, environment, a complete range of products and to always be close to our customers are keywords to Hydroscand.

Quality Our aim is to build strong and long-term relations with you as a customer, which means requirements for high and continuous quality. By quality, we mean that our products and services will meet or exceed your needs when it comes to product characteristics, logistic solutions and finance. To achieve all this, and still have competitive prices, your input is very important to us. Only by listening to you, our valued customer, can we constantly improve our service. As an additional step in this process we have been ISO-certified according to ISO9001 since 1999.

Environment The environment is precious and it is our responsibility to take care of it. Therefore we have an environmental policy in place to reduce our pollution and contribute to a cleaner environment. We are of course certified according to ISO-14001. You can read more about our environmental policy at www.hydroscand.com.

Products By listening to your needs, we can quickly adjust our range of products. Our aim is to have the widest range of products on the market of hose and fluid connectors. If there are any products you are missing, do not hesitate to contact us, either at your local Hydroscand depot or send an email to info@hydroscand.se.

Proximity to the customer Flexibility and service are trademarks of all our Hose Service depots. No matter where you are, you will always find a depot close by with a locally adjusted warehouse and competent staff to share their knowledge with you. All our depots are equipped with the necessary equipment to assembly high pressure hoses and to meet all your requirements.


1

Table of Contents

High Pressure Hoses

7

1:4

Industrial Hoses

1:9

Pipes

101

Reusable Fittings

105

4:2

Cross Over Fittings

111

4:4

Interlock Couplings

133

Hose Couplings – Industrial / Fuel / AC

141

5:01

Hose Clamps

175

5:05

Accessories

181

5:10

Flanges

191

5:20

Quick Release Couplings, Swivel Joints

197

5:70

Pipe Clamps

223

6

Cutting Ring Fittings

237

7

Adaptors

267

7:6

Flare Fittings

283

7:7

ORFS Couplings

295

2

5

33

8

Ball Valves, Filters, Measurement Equipment 305

9

Assembling Equipment

313

10

Stainless Steel Components

327

11

Technical Information

361

12

Contact Information

385

Š Hydroscand AB, 2008. All rights are reserved. Nothing in this Product Catalogue may be reproduced, transferred or copied without a written approval by Hydroscand AB.


HYDROSCAND

WE ARE HERE!

Sweden – HYDROSCAND AB Bogårdsvägen 43, 128 62 Sköndal Phone: +46 8 555 990 00 Fax:

+46 8 555 990 90

E-mail: info@hydroscand.se

Belarus – GidroskandBel IP

Finland – HYDROSCAND oy

Norway – HYDROSCAND AS

Dekabristov 29a, Minsk 220089

Orikedokatu 17, 203 80 Turku

Grorundveien 55 B, N-0976 Oslo

Phone: +375 17 200 84 35

Phone: +35 8 (0) 207 306 630

Phone: +47 22 91 89 00

Fax:

Fax:

Fax:

+375 17 200 84 05

+35 8 (0) 207 306 631

+47 22 25 69 48

E-mail: info@hydroscand.by

E-mail: hydroscand@hydroscand.fi

E-mail: firmapost@hydroscand.no

Denmark – HYDROSCAND A/S

Latvia – HYDROSCAND SIA

Russia – HYDROSCAND ZAO

Industrivej 51B, 4000 Roskilde

Krasta iela 105a, LV-1019 Riga

Salova 27A, 192102, Sankt Peterburg

Phone: +45 702 028 52

Phone: +371 6718 77 78

Phone: +7 (821) 320 94 32, -31

Fax:

Fax:

Fax:

+45 702 028 53

+371 6718 77 88

+7 (821) 320 09 64

E-mail: roskilde@hydroscand.dk

E-mail: info@hydroscand.lv

Estonia – HYDROSCAND AS

Lithuania – HYDROSCAND UAB

UK – HYDROSCAND Ltd

Peterburi tee 83b, 114 15 Tallinn

Savanorių pr.174 A, Vilnius LT-03153

Phone: +37 2 6831 150

Phone: +370 5 265 3560

Goodridge Avenue, Industrial Estate Gloucester GL2 5EA

Fax:

Fax:

+37 2 6831 160

E-mail: info@hydroscand.ee

4

+370 5 265 3561

Email: info@hydroscand.lt

Phone: +44 (0) 1452 50 00 73 Fax:

+44 (0) 1452 30 00 86

E-mail: info@hydroscand.co.uk

PRODUCT CATALOGUE 2009 www.hydroscand.com


We focus on you! Always close to your nearest hose connector HYDROSCAND is present in 10 European countires. We have more than 100 local representatives and 500 retailers.

Production centres From our 8 OEM production sites around Europe we help our big customers streamlining their production. We offer custom kits, pre-made assemblies, fittings and adapters delivered straight to the factory floor on time.

Service Express Unexpected leakage on your machine? No problem. Help is just one phone call or fax away. Service express is like a mobile Hydroscand store. Fully equipped with assembly tools and our standard assortment of hoses and fittings so that a replacement can be done on the site. Service express is ready seven days a week to help you troubleshooting problems that occur.


Hydroscand Design & Test Centre Product safety and quality tests In order to ensure quality and safety, we subject our products to harsh tests before they are released to the market. The test centre is equipped with machinery to conduct tests according to international standards concerning flex/impulse testing of hose assemblies and accelerated corrosion tests of plated steel products. Just so that you as a customer can feel confident when choosing our products.

Research and development A good product can always be better. Having customers from many different areas gives us a strong input to our product development cycle. We use SolidWorks 3D-CAD when we design our fittings optimised for best performance. CAD fittings are also available on-line where you can download them and easily implement them into your design. Our engineering staff have the tools and expertise to offer special solutions that fit your application.


1 HYDROSCAND High Pressure Hoses

Product group 100 & 110

Recommended fluids

Our wide range of high pressure hoses are suitable for applications with extremely high pressure, high impulses and high temperatures. The hoses are mainly used for hydraulic applications, high pressure washing, chemicals, gas lines and spray paint applications.

Synthetic oil resistant rubber

HOSE TYPES

Polyester

Braided rubber hose – Up to three braids of high tensile steel wire – Temperature range from -55°C to +155°C

This inner tube is suitable for fluids such as mineral oil, vegetable oils and synthetic ester-based oil (up to 100°C), glycols and polyglycols, mineral oils in aqueous emulsion, hydrocarbons, water etc.

This inner tube is suitable for fluids such as hydraulic oil, grease, fuel oils, mineral oils, most phosphate esters and water. It’s also suitable for many industrial gases such as Heliox (max 25% O2), Argon, Nitrogen, carbon dioxide, Helium and air.

– Wide variation of covers and top coatings – Working pressure up to 47.0 MPa This is a very flexible hose type, suitable for almost all types of hydraulic applications.

Polyamide This inner tube offers optimal resistance to a wide range of fluids such as paints, chlorinated solvents and other chemicals.

Spiral rubber hose – Up to six spirals of high tensile steel wire

P.T.F.E.

– Temperature range from -40°C to +121°C

The P.T.F.E. inner tube is resistant to all chemicals and solvents except molten alkali metals and fluorine gas.

– Wide variation of covers and top coatings – Working pressure up to 50.0 MPa This hose type is designed for applications with very high pressure combined with high impulses such as hammer hydraulics.

Thermoplastic hose – Wide variation of reinforcements – Temperature range from -40°C to +100°C – Good abrasion resistant covers – Working pressure up to 80.0 MPa This hose type has outstanding flexibility throughout the temperature range and has a low volumetric expansion, giving excellent hydraulic response times.

P.T.F.E.

ABBREVIATIONS CO Hose type to be used in hard conditions. The cover is resistant to abrasion, ozone and flames. XA Hose type to be used in severe environmental conditions. With a polymer cover with extra outstanding abrasion and ozone resistance. PO Hose type to be used in arctic environments. Excellent flexibility throughout the temperature range.

– Wide variation of reinforcements – Temperature range from -70°C to +260°C – Extremely low frictional characteristics – Working pressure up to 19.8 MPa – Nonflammable The high molecular weight structure in this type of hose provides an outstanding resistance towards a wide range of chemicals. Combined with their superior non-stick properties and wide temperature range, hoses made of P.T.F.E. are the ideal problem-solvers for virtually all aggressive applications.

Kevlar® and Teflon® are registered trademarks of Du Pont. Hydroscand reserves the right to modify any or all parts of this catalogue without any prior notice.

PRODUCT CATALOGUE 2009

WORKING PRESSURE INDEX, SEE CHAPTER 11 7


Table of contents

Standard braided hydraulic hoseS page 1103-03 1105-10 1106-03 1075 1101-00 1101-14 1102-00 1102-14 1102-44 1110-00/-03 1003-10 1071 1087

Kappaflex 1 Kappaflex 2K CO Kappaflex 3 Compactflex Egeflex 1 Egeflex 1 CO Egeflex 2 Egeflex 2 CO Egeflex 2 PO Isobar 10 Sae 100 R1AT – Red Hi-Temp Marion 2XA

10 10 11 11 12 12 13 13 14 14 15 15 16

P.T.F.E. hoseS page

1092-01 1093-01 1095 1091 1094

P.T.F.E. P.T.F.E. P.T.F.E. P.T.F.E. P.T.F.E.

SPIR STAR page

1201-11 1201-30 1201-40 1201-46

Spir Spir Spir Spir

Hose Hose Hose, Double Steel Braids Hose, Convoluted Hose, Convoluted Taped

Star, Star, Star, Star,

Type 2W Type 4 6 Type 6H

27 27 28 28 29

30 30 31 31

MULTISPIRAL hydraulic hoseS page 1015 1015-14 1118-02 1142-14 1014

Deltaflex Deltaflex CO Gammaflex Isobar 42 CO / 1135-14 Isobar 35 CO Blastopak

HIGH PRESSURE WATER CLEANING hoseS page

1054 1055

Pressure Washer Hose HTP-1C Pressure Washer Hose HTP-2C

THERMOPLASTIC hoseS page

1031-01 1032 1032 1034-01 1036 1037-01 1038-01 1045-01 1047 1049-01 1052 1059-01 1058-01 1056-01

Hydroscand Hydroscand Hydroscand Hydroscand Hydroscand Hydroscand Hydroscand Hydroscand Hydroscand Hydroscand Hydroscand Hydroscand Hydroscand Hydroscand

8

T1111 T1112, Twin T1113, Triple T1211 T1212, Twin T1121, Paint Spray Hose T1221, Paint Spray Hose T7011 Supertwin T7012, Twin T8011 T8012, Supertwin, Twin T8081 T3011 T3311

16 17 17 18 18

19 19

20 20 21 21 22 22 23 23 24 24 25 25 26 26

PRODUCT CATALOGUE 2009


1

Hydroscand's CrossOver hoses – for the needs of today and tomorrow! Hydroscand's CrossOver hoses are a new generation of hydraulic hoses to meet the abrasion and UV radiation requirements of today and tomorrow. CO, an abbreviation of CrossOver, means that the hoses are adjusted to a wider range of usage than before, and with an emphasis on abrasion and ozone resistance. Most of the hoses are also flame resistant according to the latest demands.

Advantages with the CrossOver hoses

□ □ □ □

The CO hoses exceed the demand for abrasion resistance in each standard. They have improved resistance towards UV radiation and therefore also less problems with cracks. A thinner ozone layer around our planet creates larger hose problems! They are desined with very good bend characteristics with preserved pressure performance. Their powerfully improved life length gives shorter standstills and therefore lower costs!

The CO-programme Egeflex 1 CO A hose equivalent to EN 853 1SN for applications with medium/high pressures and much external abrasion. MSHA, DNV and MED certification guarantee that the hose can be used in many different areas.

Egeflex 2 CO A hose equivalent to EN 853 2SN for normal working pressures and characteristics. MSHA, DNV and MED certification guarantee that the hose can be used in many different areas.

Kappaflex 2K CO A compact-built hose with fitted measurements and tight bend radius that can handle higher pressures than EN 857 2SC. MSHA, DNV and MED certifications guarantee that the hose can be used in many different areas.

Deltaflex 4 CO A braided hose with four layers that exceeds the demands for EN 856 4SP. High working pressure and very flexible. Has been certified by Det Norske Veritas (DNV).

ISO BAR 42 CO A multi spiral hose with four, or alternatively six depending on dimension, spirals. The hose is designed for very extreme working pressures but still have the flexibility intact. MSHA, DNV and MED certification guarantee that the hose can be used in many different areas.

PRODUCT CATALOGUE 2009

9


1103-03 KAPPAFLEX 1 Construction Inner tube:

Synthetic oil resistant rubber

Cover:

Weather and oil resistant rubber

Reinforcement:

One braid of compact steel wire

Safety factor:

4:1

Temperature:

-40°C – +100°C

Design:

Grey and orange label, wrapped

Applications/Characteristics A hose for low to medium pressure and return lines (10.0–29.0 MPa). Exceeds EN 857 1SC. Ferrule:

4200-07-xx

Product group:

100

Part number 1103-03-04 1103-03-05 1103-03-06 1103-03-08 1103-03-10 1103-03-12 1103-03-16 1103-03-20

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

6.5 8.0 9.5 13.0 16.0 19.0 25.0 32.0

1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4"

11.8 13.6 16.5 19.0 22.3 26.2 34.0 44.0

29.0 25.0 23.0 20.0 15.0 12.5 11.0 10.0

40 55 65 80 105 120 160 300

0.18 0.22 0.29 0.35 0.43 0.57 0.82 1.28

1105-10 KAPPAFLEX 2K CO Construction Inner tube:

Synthetic oil resistant rubber

Cover:

Durable; weather and oil resistant rubber

Reinforcement:

Two braids of compact steel wire

Safety factor:

4:1

Temperature:

-40°C – +100°C

Design:

Green label, wrapped

Certificate

MED

Applications/Characteristics Ozone resistant hose for applications with high pressures, well suited for marine applications. Exceeds EN 857 2SC. Ferrule:

4200-11-xx, 4200-23-xx

Product group:

100

Part number 1105-10-04 1105-10-05 1105-10-06 1105-10-08 1105-10-10 1105-10-12 1105-10-16

10

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

6.5 8.0 9.5 13.0 16.0 19.0 25.0

1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1"

13.4 15.0 17.4 20.6 23.7 27.7 35.6

45.0 42.0 38.5 34.5 29.0 28.0 20.0

45 60 70 90 130 160 210

0.29 0.34 0.44 0.54 0.63 0.84 1.14

PRODUCT CATALOGUE 2009


1 1106-03 KAPPAFLEX 3 Construction Inner tube:

Synthetic oil resistant rubber

Cover:

Weather and oil resistant rubber

Reinforcement:

Three braids of compact steel wire

Safety factor:

4:1

Temperature:

-40°C – +100°C

Design:

Grey and orange label, wrapped

Applications/Characteristics This hose is suitable for applications with very high pressures (47.0–32.7 MPa). Exceeds EN 857 2SC (40.0–16.5 MPa). Ferrule:

4200-19-xx, 4200-23-xx

Product group:

100

Part number 1106-03-08 1106-03-10 1106-03-12 1106-03-16

1075

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

13.0 16.0 19.0 25.0

1/2" 5/8" 3/4" 1"

24.3 28.0 31.5 39.8

47.0 41.0 37.5 32.7

210 250 290 340

0.90 1.05 1.40 1.88

COMPACTFLEX Construction Inner tube:

Synthetic oil resistant rubber

Cover:

Weather and oil resistant rubber

Reinforcement:

One braid of compact steel wire

Safety factor:

4:1

Temperature:

-40°C – +100°C

Design:

Smooth, white text

Applications/Characteristics The hose is suitable when, in standard hydraulics, there is a need for a very compact and flexible hose. Equivalent to SAE 100 R16. Ferrule:

4200-23-xx

Product group:

100

Part number 1075-00-04 1075-00-05 1075-00-06 1075-00-08 1075-00-10 1075-00-12

PRODUCT CATALOGUE 2009

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

6.0 8.0 9.0 13.0 16.0 19.0

1/4" 5/16" 3/8" 1/2" 5/8" 3/4"

13.0 14.7 17.0 20.3 23.4 27.2

34.5 29.5 27.5 24.0 19.0 15.5

51 57 63 89 102 120

0.25 0.30 0.37 0.48 0.58 0.69

11


1101-00 EGEFLEX 1 Construction Inner tube:

Synthetic oil resistant rubber

Cover:

Weather and oil resistant rubber

Reinforcement:

One braid of steel wire

Safety factor:

4:1

Temperature:

-40°C – +100°C

Design:

White text, wrapped

Applications/Characteristics A hose for applications with medium pressure and return lines. Equivalent to EN 853 1SN (25.0–4.0 MPa). Ferrule:

4200-21-xx, 4200-23-xx

Product group:

100

Part number 1101-00-03 1101-00-04 1101-00-05 1101-00-06 1101-00-08 1101-00-10 1101-00-12 1101-00-16 1101-00-20 1101-00-24 1101-00-32

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

5.0 6.5 8.0 9.5 13.0 16.0 19.0 25.0 32.0 38.0 51.0

3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2" 2"

11.8 13.4 15.0 17.4 20.6 23.7 27.7 35.6 43.5 50.6 64.0

25.0 22.5 21.5 18.0 16.0 13.0 10.5 8.8 6.3 5.0 4.0

90 100 115 130 180 200 240 300 420 500 630

0.19 0.21 0.24 0.33 0.41 0.45 0.58 0.88 1.22 1.47 1.98

1101-14 EGEFLEX 1 CO Construction Inner tube:

Synthetic oil resistant rubber

Cover:

Weather and oil resistant rubber

Reinforcement:

One braid of steel wire

Safety factor:

4:1

Temperature:

-40°C – +100°C

Design:

Blue label, wrapped

Certificate

MED

Applications/Characteristics Ozone resistant hose for applications with medium/high pressures and much external abrasion. Equivalent to EN 853 1SN (25.0–4.0 MPa). The hose is approved by MSHA (flame resistant). Ferrule:

4200-11-xx, 4200-21-xx (3/16"–1"), 4200-23-xx (1"–2")

Product group:

100

Part number 1101-14-03 1101-14-04 1101-14-05 1101-14-06 1101-14-08 1101-14-10 1101-14-12 1101-14-16 1101-14-20 1101-14-24 1101-14-32

12

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

5.0 6.5 8.0 10.0 13.0 16.0 19.0 25.0 32.0 38.0 51.0

3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2" 2"

11.8 13.4 15.0 17.4 20.6 23.7 27.7 35.6 43.5 50.6 64.0

25.0 22.5 21.5 18.0 16.0 13.0 10.5 8.8 6.3 5.0 4.0

90 100 115 125 180 200 240 300 420 500 630

0.19 0.21 0.24 0.33 0.41 0.45 0.58 0.88 1.23 1.51 1.97

PRODUCT CATALOGUE 2009


1 1102-00 EGEFLEX 2 Construction Inner tube:

Synthetic oil resistant rubber

Cover:

Weather and oil resistant rubber

Reinforcement:

Two braids of steel wire

Safety factor:

4:1

Temperature:

-40°C – +100°C

Design:

Embossed branding line, wrapped

Applications/Characteristics A hose for applications with medium to high pressures. Equivalent to EN 857 2SN (41.5–8.0 MPa). Ferrule:

4200-12-xx, 4200-22-xx, 4200-23-xx

Product group:

100

Part number 1102-00-03 1102-00-04 1102-00-05 1102-00-06 1102-00-08 1102-00-10 1102-00-12 1102-00-16 1102-00-20 1102-00-24 1102-00-32

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

5.0 6.5 8.0 9.5 13.0 16.0 19.0 25.0 32.0 38.0 51.0

3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2" 2"

13.4 15.0 16.6 19.0 22.2 25.4 29.3 38.1 48.3 54.6 67.0

41.5 40.0 35.0 33.0 27.5 25.0 21.5 16.5 12.5 9.0 7.8

90 100 115 130 180 200 240 300 420 500 630

0.31 0.33 0.39 0.50 0.59 0.71 0.86 1.28 2.04 2.27 2.87

1102-14 EGEFLEX 2 CO Construction Inner tube:

Synthetic oil resistant rubber

Cover:

Abrasion, weather and heat resistant synthetic rubber

Reinforcement:

Two braids of steel wire

Safety factor:

4:1

Temperature:

-40°C – +100°C

Design:

Orange label, wrapped

Certificate

MED

Applications/Characteristics A hose for applications with medium to high pressures and a lot of external abrasion. Equivalent to EN 853 2SN. Approved by MSHA (flame resistant). The certificates refer to dimensions 3/16" – 1". Ferrule:

4200-12-xx, 4200-22-xx, 4200-23-xx

Product group:

100

Part number 1102-14-03 1102-14-04 1102-14-05 1102-14-06 1102-14-08 1102-14-10 1102-14-12 1102-14-16 1102-14-20 1102-14-24 1102-14-32

PRODUCT CATALOGUE 2009

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

5.0 6.5 8.0 9.5 13.0 16.0 19.0 25.0 32.0 38.0 51.0

3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2" 2"

13.4 15.0 16.6 19.0 22.2 25.4 29.3 38.1 48.3 54.6 67.0

41.5 40.0 35.0 33.0 27.5 25.0 21.5 16.5 12.5 9.0 8.0

90 100 115 130 180 200 240 300 420 500 630

0.31 0.33 0.39 0.50 0.59 0.71 0.86 1.28 2.04 2.27 2.87

13


1102-44 EGEFLEX 2 PO Construction Inner tube:

Cold and oil resistant rubber

Cover:

Cold, weather and oil resistant rubber

Reinforcement:

Two braids of steel wire

Safety factor:

4:1

Temperature:

-50°C – +100°C

Design:

Grey, blue and orange lable, wrapped

Applications/Characteristics A hose for applications with medium to high pressures. The hose is made to be used in arctic environments. Excellent flexibility throughout the whole temperature range. Equivalent to EN 853 2SN (41.5–8.0 MPa). Ferrule:

4200-21-xx, 4200-23-xx

Product group:

100

Part number 1102-44-04 1102-44-06 1102-44-08

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

6.5 9.5 13.0

1/4" 3/8" 1/2"

15.0 19.0 22.2

40.0 33.0 27.5

100 130 180

0.33 0.50 0.59

Other dimensions are available upon request.

1110-00/-03 ISOBAR 10 Construction Inner tube:

Synthetic oil resistant rubber

Cover:

Weather and oil resistant rubber

Reinforcement:

One braid of steel wire

Safety factor:

4:1

Temperature:

-40°C – +100°C

Design:

1110-00 Embossed brading line, wrapped

1110-03 Blue and white lable, wrapped

Applications/Characteristics The hose is especially developed for pilot lines, but can also be used for low pressure lines with assembling restrictions. Ferrule:

4200-07-xx

Product group:

100

Part number

14

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

1110-00-06 1110-00-08

9.5 13.0

3/8" 1/2"

14.8 18.0

10.0 10.0

40 50

0.21 0.27

1110-03-06 1110-03-08

9.5 13.0

3/8" 1/2"

14.8 18.0

10.0 10.0

40 50

0.21 0.27

PRODUCT CATALOGUE 2009


1 1003-10 SAE 100 R1AT – RED Construction Inner tube:

Synthetic oil resistant rubber

Cover:

Heat and abrasion resistant rubber

Reinforcement:

One braid of steel wire

Safety factor:

4:1

Temperature:

-40°C – +100°C

Design:

Red cover, white text

Applications/Characteristics The hose is made for fire extinguishing applications. Ferrule:

4200-11-xx, 4200-23-xx

Product group:

110

Part number 1003-10-04 1003-10-06 1003-10-08 1003-10-12 1003-10-16

1071

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

6.0 9.0 13.0 19.0 25.0

1/4" 3/8" 1/2" 3/4" 1"

14.2 18.1 21.5 28.6 36.6

19.0 15.5 14.0 8.5 7.0

95 110 160 220 275

0.25 0.36 0.45 0.65 0.91

HI-TEMP Construction Inner tube:

Synthetic oil and heat resistant rubber

Cover:

Synthetic abrasion resistant rubber

Reinforcement:

One braid of steel wire

Safety factor:

4:1

Temperature:

-40°C – +150°C

Design:

Wrapped, white text

Certificate

MED

Applications/Characteristics The hose is suitable for hydraulic pipes, truck engines, transportation of oil and gasoline with extra high temperature. It is also available in pin-pricked design for compressor applications. Ferrule:

4200-21-xx, 4200-23-xx

Product group:

110

Part number 1071-00-04 1071-00-06 1071-00-08 1071-00-10 1071-00-12 1071-00-16 1071-00-20 1071-00-24 1071-00-32

PRODUCT CATALOGUE 2009

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

6.4 9.5 12.7 15.9 19.1 25.4 31.8 38.1 51.0

1/4" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2" 2"

13.4 17.4 20.6 23.7 27.7 35.6 43.5 50.6 64.0

22.5 18.0 16.0 13.0 10.5 8.8 6.3 5.0 4.0

100 130 180 200 240 300 420 500 630

0.21 0.33 0.41 0.45 0.58 0.88 1.23 1.51 1.97

15


1087 MARION 2XA Construction Inner tube:

Syntetic oil resistant rubber

Cover:

Synthetic rubber

Top cover:

Extra durable polymetric coating

Reinforcement:

Two braids of compact steel wire

Safety factor:

4:1

Temperature:

-40°C – +100°C, temporarily 120°C

Design:

Black, smooth

Applications/Characteristics The hose is suitable when there are demands for high pressures and compact dimensions. The top cover of polymer has a low level of friction and is extremely durable. Equivalent to EN 857 2SC (40.0–16.5 MPa). Ferrule:

4200-11-xx, 4200-21-xx, 4200-23-xx

Product group:

100

Part number 1087-00-04 1087-00-06 1087-00-08 1087-00-10 1087-00-12 1087-00-16

1015

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

6.5 9.5 13.0 16.0 19.0 25.0

1/4" 3/8" 1/2" 5/8" 3/4" 1"

14.2 18.3 21.5 24.7 28.6 36.6

40.0 35.0 30.0 27.5 23.5 18.5

75 90 130 170 200 250

0.28 0.42 0.52 0.61 0.79 1.10

DELTAFLEX Construction Inner tube:

Synthetic oil resistant rubber

Cover:

Weather and oil resistant rubber

Reinforcement:

Four spirals of steel wire

Safety factor:

4:1

Temperature:

-40°C – +100°C

Design:

Yellow marking, wrapped

Certificate

MED

Applications/Characteristics The hose is equivalent to, or exceeds, EN 856 4SP regarding pressure. Ferrule:

4200-19-xx, 4200-20-xx, 4400-09-xx, 4500-11-xx

Product group:

110

Part number 1015-00-04 1015-00-06 1015-00-08 1015-00-10 1015-00-12 1015-00-16 1015-00-20 1015-00-24 1015-00-32

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

6.0 9.0 13.0 16.0 19.0 25.0 32.0 38.0 50.0

1/4" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2" 2"

17.8 21.4 24.6 28.5 32.0 38.8 47.5 53.5 67.0

50.0 44.5 41.5 39.0 35.0 31.0 28.0 26.0 21.0

120 130 180 225 280 355 460 560 710

0.73 0.91 1.08 1.39 1.73 2.31 3.07 3.56 4.25

The hose is also available in CO-design with MSHA approval , see 1015-14-xx.

16

PRODUCT CATALOGUE 2009


1 1015-14 DELTAFLEX CO Construction Inner tube:

Synthetic oil resistant rubber

Cover:

Weather and oil resistant rubber

Reinforcement:

Four spirals of steel wire

Safety factor:

4:1

Temperature:

-40°C – +100°C

Design:

Yellow marking, wrapped

Certificate

Applications/Characteristics The hose is equivalent to, or exceeds EN 856 4SP regarding pressure. Aditionally, the hose is extra abrasion resistant. The hose is approved by MSHA. Ferrule:

4200-19-xx, 4200-20-xx, 4400-09-xx, 4500-11-xx

Product group:

110

Part number 1015-14-04 1015-14-06 1015-14-08 1015-14-10 1015-14-12 1015-14-16 1015-14-20 1015-14-24 1015-14-32

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

6.0 9.0 13.0 16.0 19.0 25.0 32.0 38.0 50.0

1/4" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2" 2"

17.8 21.4 24.6 28.5 32.0 38.8 47.5 53.5 67.0

50.0 44.5 41.5 39.0 35.0 31.0 28.0 26.0 21.0

120 130 180 225 280 355 460 560 710

0.73 0.91 1.08 1.39 1.73 2.31 3.07 3.56 4.25

1118-02 GAMMAFLEX Construction Inner tube:

Synthetic oil resistant rubber

Cover:

Weather and oil resistant rubber

Reinforcement:

Four spirals of steel wire

Safety factor:

4:1

Temperature:

-40°C – +100°C

Design:

Yellow marking, wrapped

Applications/Characteristics The hose is equivalent to EN 856 4SH and approved by MSHA (flame resistant). Ferrule:

4200-19-xx, 4200-20-xx, 4400-09-xx

Product group:

110

Part number 1118-02-12 1118-02-16 1118-02-20 1118-02-24 1118-02-32

PRODUCT CATALOGUE 2009

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

19.0 25.0 32.0 38.0 50.0

3/4" 1" 1 1/4" 1 1/2" 2"

32.2 38.4 45.2 53.5 68.0

42.0 38.0 32.5 29.0 25.0

280 340 460 560 710

1.53 2.14 2.49 3.38 4.70

17


1142-14 ISOBAR 42 CO / 1135-14 ISOBAR 35 CO Construction Inner tube:

Syntetic oil resistant rubber

Cover:

Synthetic abrasion, weather and heat resistant rubber

Reinforcement:

ID 19–25: Four spirals of steel wire

ID 32–51: Six spirals of steel wire

Safety factor:

4:1

Temperature:

-40°C – +121°C

Design:

Red, black and white marking, wrapped

Certificate

Applications/Characteristics The hose is suitable for very high pressures in combination with very high impulses and a lot of external abrasion. The hose is MSHA approved (flame resistant). ID 3/4" – 1 1/2" is equivalent to, or exceeds, SAE 100 R15. ID 2" is equivalent to, or exceeds, SAE 100 R13. Ferrule:

4400-09-xx, 4400-13-xx, 4400-14-xx

Product group:

110

Part number 1142-14-12 1142-14-16 1142-14-20 1142-14-24 1135-14-32

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

19.0 25.0 32.0 38.0 51.0

3/4" 1" 1 1/4" 1 1/2" 2"

32.2 38.7 50.4 57.9 70.5

42.0 42.0 42.0 42.0 35.0

267 330 445 533 630

1.55 2.10 3.65 5.00 7.09

The hose is also available in XA-design.

1014

BLASTOPAK Construction Inner tube:

Synthetic oil and water resistant rubber

Cover:

Extra abrasion resistant, synthetic rubber

Reinforcement:

Dim 6 & 10mm: Four spirals and one braid of steel wire

Dim 12: Four spirals of steel wire

Dim 19 & 25mm: Six spirals of steel wire

Safety factor:

2.5:1

Temperature:

-40°C – +120°C

Design:

Wrapped

Applications/Characteristics The hose is suitable for water blasting with extremely high pressures. The hose is designed for static water pressures but is not suitable for hydraulic applications. Ferrule:

4500-10-xx

Product group:

110

Part number 1014-00-06 1014-00-08 1014-00-12 1014-00-16

18

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

9.5 13.0 19.0 25.0

3/8" 1/2" 3/4" 1"

25.1 27.8 36.0 42.0

100.0 100.0 100.0 80.0

130 200 250 300

1.20 1.25 1.70 2.50

PRODUCT CATALOGUE 2009


1 1054

PRESSURE WASHER HOSE HTP-1C Construction Inner tube:

Synthetic temperature resistant rubber

Cover:

Abrasion resistant rubber

Reinforcement:

One braid of compact steel wire

Safety factor:

2.5:1

Temperature:

-40°C – +155°C

Design:

Black or blue pin-pricked cover

Applications/Characteristics This hose is intended for pressure washers where low weight and pliability is required. Available in black, oil resistant rubber for workshops and flush halls; and in blue for sensitive environments. Ferrule:

4200-07-xx

Product group:

110

Part number 1054-01-05 1054-01-06 1054-02-04 1054-02-05 1054-02-06 1054-02-08

1055

ID mm

ID inch

OD mm

8.0 9.5 6.0 8.0 9.5 12.7

5/16" 3/8" 1/4" 5/16" 3/8" 1/2"

14.0 15.6 12.2 13.6 15.5 19.0

Work pr. Bend rad. MPa mm 34.4 28.8 36.0 34.4 28.8 25.6

85 90 75 85 90 130

BP Cover Weight MPa kg/m 86 72 90 86 72 64

Black Black Blue Blue Blue Blue

0.22 0.28 0.18 0.21 0.28 0.35

PRESSURE WASHER HOSE HTP-2C Construction Inner tube:

Synthetic temperature resistant rubber

Cover:

Abrasion resistant rubber

Reinforcement:

Two braids of compact steel wire

Safety factor:

2.5:1

Temperature:

-40°C – +155°C

Design:

Black or blue pin-pricked cover

Applications/Characteristics This hose is intended for pressure washers where there are high demands regarding pressure, temperature and pliability. Available in black, oil resistant rubber for workshops and flush halls; and in blue for sensitive environments. Ferrule:

4200-23-xx

Product group:

110

Part number 1055-01-05 1055-01-06 1055-02-05 1055-02-06 1055-02-08

PRODUCT CATALOGUE 2009

ID mm

ID inch

OD mm

8.0 9.5 8.0 9.5 12.7

5/16" 3/8" 5/16" 3/8" 1/2"

15.0 17.1 15.0 17.1 20.7

Work pr. Bend rad. MPa mm 56.0 52.8 56.0 52.8 44.0

85 90 85 90 130

BP Cover Weight MPa kg/m 140 132 140 132 110

Black Black Blue Blue Blue

0.34 0.42 0.34 0.42 0.59

19


1031-01 HYDROSCAND T1111 Construction Inner tube:

Seamless polyester elastomer

Cover:

Oil, weather and abrasion resistant polyurethane

Reinforcement:

One braid of steel wire

Safety factor:

4:1

Temperature:

-40°C – +100°C, air and water max +70°C

Design:

Black cover, pin-pricked

Applications/Characteristics The hose is well suitable for high pressure hydraulics, high pressure gas applications as well as pressure washers. Due to the inner tube of polyester, the hose will retain its flexibility in cold temperatures. Ferrule:

4200-28-xx

Product group:

110

Part number 1031-01-03 1031-01-04 1031-01-05 1031-01-06 1031-01-08 1031-01-10 1031-01-12 1031-01-16

1032

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

5.0 6.5 8.0 10.0 13.0 16.0 19.0 25.0

3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1"

9.7 11.7 13.2 16.5 18.8 22.0 25.8 33.0

36.0 31.0 25.0 22.5 19.0 14.0 11.5 9.5

30 40 55 65 85 115 145 180

0.12 0.15 0.19 0.22 0.29 0.33 0.43 0.62

HYDROSCAND T1112, TWIN Construction Inner tube:

Seamless polyester elastomer

Cover:

Oil, weather and abrasion resistant polyurethane

Reinforcement:

One braid of steel wire

Safety factor:

4:1

Temperature:

-40°C – +100°C, air and water max +70°C

Design:

Supertwin, black cover, pin-pricked

Applications/Characteristics The hose is well suitable for high pressure hydraulics, high pressure gas applications as well as pressure washers. Due to the inner tube of polyester, the hose will retain its flexibility in cold temperatures. Ferrule:

4200-28-xx

Product group:

110

Part number 1032-03-03 1032-04-04 1032-05-05 1032-06-06 1032-08-08

20

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

5.0 6.5 8.0 10.0 13.0

3/16" 1/4" 5/16" 3/8" 1/2"

9.7 11.7 13.2 16.5 18.8

36.0 31.0 25.0 22.5 19.0

30 40 55 65 85

Weight kg/m 0.24 0.30 0.38 0.44 0.58

PRODUCT CATALOGUE 2009


1 1032

HYDROSCAND T1113, TRIPLE Construction Inner tube:

Seamless polyester elastomer

Cover:

Oil, weather and abrasion resistant polyurethane

Reinforcement:

One braid of steel wire

Safety factor:

4:1

Temperature:

-40°C – +100°C, air and water max +70°C

Design:

Triple, black cover, pin-pricked

Applications/Characteristics The hose is well suitable for high pressure hydraulics, high pressure gas applications as well as pressure washers. Due to the inner tube of polyester, the hose will retain its flexibility in cold temperatures. Ferrule:

4200-28-xx

Product group:

110

Part number 1032-04-04-04 1032-06-06-06 1032-08-08-08

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

6.5 10.0 13.0

1/4" 3/8" 1/2"

11.7 15.9 18.8

31.0 22.5 19.0

40 65 85

0.45 0.66 0.87

1034-01 HYDROSCAND T1211 Construction Inner tube:

Seamless polyester elastomer

Cover:

Oil and abrasion resistant polyurethane

Reinforcement:

Two braids of steel wire

Safety factor:

4:1

Temperature:

-40°C – +100°C, air and water max +70°C

Design:

Black cover, pin-pricked

Applications/Characteristics This hose is well suited for high pressure hydraulics and high pressure gas applications. Due to the inner tube of polyester, the hose will retain its flexibility in cold temperatures. Ferrule:

4200-29-xx

Product group:

110

Part number 1034-01-04 1034-01-06 1034-01-08 1034-01-10 1034-01-12

PRODUCT CATALOGUE 2009

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

6.0 10.0 13.0 16.0 19.0

1/4" 3/8" 1/2" 5/8" 3/4"

12.8 16.8 20.2 23.5 27.5

40.0 33.0 26.0 22.0 15.0

40 65 85 115 170

0.24 0.37 0.45 0.56 0.70

21


1036

HYDROSCAND T1212, TWIN Construction Inner tube:

Seamless polyester elastomer

Cover:

Oil and abrasion resistant polyurethane

Reinforcement:

Two braids of steel wire

Safety factor:

4:1

Temperature:

-40°C – +100°C, air and water max +70°C

Design:

Supertwin, black cover, pin-pricked

Applications/Characteristics This hose is well suited for high pressure hydraulics and high pressure gas applications. Due to the inner tube of polyester, the hose will retain its flexibility in cold temperatures. Ferrule:

4200-29-xx

Product group:

110

Part number 1036-06-06 1036-08-08

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

10.0 13.0

3/8" 1/2"

16.8 20.2

33.0 26.0

65 85

0.76 0.90

1037-01 HYDROSCAND T1121, PAINT SPRAY HOSE Construction Inner tube:

Seamless polyamide

Cover:

Polyurethane

Reinforcement:

One braid of steel wire

Safety factor:

4:1

Temperature:

-40°C – +100°C, air and water max +70°C

Design:

Blue cover

Applications/Characteristics The hose is well suitable for spray paint applications, dissolvents and other chemicals. The steel reinforcement provides electrical conductivity through the hose. Should be checked after mounting the fittings. Ferrule:

4200-28-xx

Product group:

110

Part number 1037-01-03 1037-01-04 1037-01-06 1037-01-08

22

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

5.0 6.5 10.0 13.0

3/16" 1/4" 3/8" 1/2"

9.7 11.7 16.5 18.8

36.0 31.0 22.5 19.0

30 40 65 85

0.11 0.15 0.22 0.29

PRODUCT CATALOGUE 2009


1 1038-01 HYDROSCAND T1221, PAINT SPRAY HOSE Construction Inner tube:

Seamless polyamide / Nylon 6

Cover:

Polyurethane

Reinforcement:

Two braids of steel wire

Safety factor:

4:1

Temperature:

-40°C – +100°C, air and water max +70°C

Design:

Blue cover, pin-pricked

Applications/Characteristics Paint spray hose for high pressures. It is well suitable for spray paint applications, dissolvents and other chemicals. The steel reinforcement provides electrical conductivity through the hose. Should be checked after mounting the fittings. Ferrule:

4200-29-xx

Product group:

110

Part number 1038-01-04 1038-01-06 1038-01-08

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

6.5 10.0 13.0

1/4" 3/8" 1/2"

12.8 16.8 20.2

40.0 33.0 26.0

40 65 85

0.25 0.38 0.45

1045-01 HYDROSCAND T7011 Construction Inner tube:

Polyester elastomer

Cover:

Oil and abrasion resistant polyurethane

Reinforcement:

One braid of polyester

Safety factor:

4:1

Temperature:

-40°C – +100°C, air and water max +70°C

Design:

Black cover, pin-pricked

Applications/Characteristics This hose is well suited for hydraulics, grease gun systems and gas applications. Due to the inner tube of polyester, the hose will retain its flexibility in cold temperatures. Equivalent to SAE 100 R7. Ferrule:

4200-27-xx

Product group:

110

Part number 1045-01-02 1045-01-03 1045-01-04 1045-01-05 1045-01-06 1045-01-08 1045-01-12 1045-01-16

PRODUCT CATALOGUE 2009

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

3.5 5.0 6.5 8.0 10.0 13.0 19.0 25.0

1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 3/4" 1"

8.3 9.6 12.2 14.3 16.0 20.3 27.1 34.0

21.0 21.0 21.0 19.0 16.0 14.0 9.0 7.0

25 25 35 45 55 75 140 190

0.05 0.06 0.10 0.13 0.15 0.22 0.33 0.46

23


1047

HYDROSCAND SUPERTWIN T7012, TWIN Construction Inner tube:

Polyester elastomer

Cover:

Oil and abrasion resistant polyurethane

Reinforcement:

One braid of polyester

Safety factor:

4:1

Temperature:

-40°C – +100°C, air and water max +70°C

Design:

Supertwin, pin-pricked

Applications/Characteristics This hose is well suited for hydraulics and gas applications. The hose retains its flexibility in cold temperatures. Equivalent to SAE 100 R7. Ferrule:

4200-27-xx

Product group:

110

Part number 1047-03-03 1047-04-04 1047-05-05 1047-06-06 1047-08-08

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

5.0 6.5 8.0 10.0 13.0

3/16" 1/4" 5/16" 3/8" 1/2"

9.6 12.2 14.3 16.0 20.3

21.0 21.0 19.0 16.0 14.0

25 35 45 55 75

0.12 0.19 0.25 0.29 0.43

1049-01 HYDROSCAND T8011 Construction Inner tube:

Polyester elastomer

Cover:

Oil and abrasion resistant polyurethane

Reinforcement:

One or two braids of aramid (Kelvar®)

Safety factor:

4:1

Temperature:

-40°C – +100°C, air and water max +70°C

Design:

Black cover, pin-pricked

Applications/Characteristics The hose is well suitable for high pressure hydraulics and high pressure gas applications. Due to the inner tube of polyester, the hose will retain its flexibility in cold temperatures. Equivalent to SAE 100 R8 regarding pressure and SAE 100 R7 regarding dimensions. Ferrule:

4200-27-xx, 4200-28-08 (1/2" only)

Product group:

110

Part number 1049-01-03 1049-01-04 1049-01-06 1049-01-08 1049-01-12

24

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

5.0 6.5 10.0 13.0 19.0

3/16" 1/4" 3/8" 1/2" 3/4"

8.9 11.5 15.5 19.9 26.9

35.0 35.0 28.0 24.5 16.5

30 50 60 80 150

Weight kg/m 0.05 0.08 0.13 0.20 0.32

PRODUCT CATALOGUE 2009


1 1052

HYDROSCAND T8012, SUPERTWIN, TWIN Construction Inner tube:

Polyester elastomer

Cover:

Oil and weather resistant polyurethane

Reinforcement:

One braid of aramid (Kelvar®)

Safety factor:

4:1

Temperature:

-40°C – +100°C, air and water max +70°C

Design:

Supertwin, pin-pricked

Applications/Characteristics The hose is well suitable for high pressure hydraulics when there is a need for twin hoses with textile reinforcements. Equivalent to SAE 100 R8 regarding pressure and SAE 100 R7 regarding dimensions. Ferrule:

4200-27-06, 4200-28-08 (1/2" only)

Product group:

110

Part number 1052-04-04 1052-06-06 1052-08-08

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

6.5 10.0 13.0

1/4" 3/8" 1/2"

11.5 15.5 19.9

35.0 28.0 24.5

30 60 80

0.16 0.26 0.40

1059-01 HYDROSCAND T8081 Construction Inner tube:

Polyester elastomer

Cover:

Polyurethane

Reinforcement:

One braid of aramid (Kelvar®)

Safety factor:

4:1

Temperature:

-40°C – +100°C, air and water max +70°C

Design:

Orange cover, pin-pricked

Applications/Characteristics This hose is well suited for high pressure hydraulics and high pressure lines. Due to the inner tube of polyester, the hose will retain its flexibility in cold temperatures. Equivalent to SAE 100 R7. Ferrule:

4200-27-xx, 4200-28-08 (1/2" only)

Product group:

110

Part number 1059-01-04 1059-01-06 1059-01-08

PRODUCT CATALOGUE 2009

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

6.5 10.0 13.0

1/4" 3/8" 1/2"

11.5 15.5 19.9

35.0 28.0 24.5

50 60 80

0.08 0.13 0.20

25


1058-01 HYDROSCAND T3011 Construction Inner tube:

Polyester elastomer

Cover:

Oil and abrasion resistant polyurethane, pin-pricked

Reinforcement:

One or two braids of aramid (Kelvar®) and one braid of steel wire

Safety factor:

4:1

Temperature:

-40°C – +100°C, water max +70°C

Design:

Black cover

Applications/Characteristics This hose is suited for hydraulics with very high pressures, e.g. high pressure pumps and heavy duty applications. Due to the inner tube of polyester, the hose will retain its flexibility in cold temperatures. Product group:

Part number 1058-01-04 1058-01-06

110

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

6.6 9.8

1/4" 3/8"

12.7 18.4

70.0 70.0

35 90

0.19 0.33

1056-02 HYDROSCAND T3311 Construction Inner tube:

Polyester elastomer

Cover:

Oil, weather and abrasion resistant polyurethane, pin-pricked

Reinforcement:

Two braids of aramid (Kelvar®) and one braid of steel wire

Safety factor:

4:1

Temperature:

-40°C – +100°C, water max +70°C

Design:

Black cover

Applications/Characteristics This hose is suited for hydraulics with very high pressures, e.g. high pressure pumps and heavy duty applications. Due to the inner tube of polyester, the hose will retain its flexibility in cold temperatures. Product group:

Part number 1056-02-04

26

110

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

6.6

1/4"

14.3

80.0

35

0.25

PRODUCT CATALOGUE 2009


1 1092-01 P.T.F.E. HOSE Construction Inner tube:

Smooth P.T.F.E. (Teflon®)

Reinforcement:

One braid of stainless steel wire

Safety factor:

4:1

Temperature:

-60°C – +260°C

Applications/Characteristics A very suitable hose for hazardous environments together with dissolvents, paint, hydraulic oils, food as well as other applications where high temperature, high pressure and resistance towards chemicals are needed along with elastic characteristics. Age resistant. Ferrule:

4200-26-xx

Product group:

110

Part number 1092-01-02 1092-01-03 1092-01-04 1092-01-05 1092-01-06 1092-01-08 1092-01-10 1092-01-12 1092-01-16

ID nom mm

ID inch

OD nom mm

WP MPa

3.4 5.1 6.7 8.4 10.0 13.2 16.6 19.8 26.1

1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1"

6.2 8.1 9.4 11.1 12.7 16.6 19.8 23.0 29.3

24.2 19.8 16.8 15.5 13.8 12.1 8.6 7.8 6.0

Bend rad. mm 38 64 76 102 127 152 178 203 305

1093-01 P.T.F.E. HOSE Construction Inner tube:

Smooth P.T.F.E. (Teflon®), heavy wall

Reinforcement:

One braid of stainless steel wire

Safety factor:

4:1

Temperature:

-60°C – +260°C

Applications/Characteristics The hose is suitable for very demanding material transportation. A very robust hose, especially suitable for low, oscillating temperatures. Age resistant. Ferrule:

4200-26-xx

Product group:

110

Part number 1093-01-04 1093-01-05 1093-01-06 1093-01-08 1093-01-10 1093-01-12 1093-01-16

PRODUCT CATALOGUE 2009

ID nom mm

ID inch

OD nom mm

WP MPa

Bend rad. mm

6.7 8.4 10.0 13.4 16.6 19.8 26.1

1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1"

10.1 11.7 13.4 16.8 20.1 23.2 29.5

17.3 16.0 13.8 12.4 8.6 7.8 5.3

51 76 83 102 127 178 292

27


1095

P.T.F.E. HOSE, DOUBLE STEEL BRAIDS Construction Inner tube:

Smooth P.T.F.E. (Teflon®)

Reinforcement:

Double braids of stainless steel wire

Safety factor:

4:1

Temperature:

-60°C – +260°C

Applications/Characteristics A very suitable hose for hazardous environments together with dissolvents, paint, fuels, hydraulic oils, food as well as other applications where high temperature, high pressure and resistance towards chemicals are needed along with elastic characteristics. Age resistant. Ferrule:

4200-15-xx, 4200-16-xx, 3800-11-xx, 3800-28-xx

Product group:

110

Part number

ID nom mm

ID inch

OD nom mm

WP MPa

Bend rad. mm

6.2 8.9 12.4

1/4" 3/8" 1/2"

9.8 13.0 16.9

19.8 19.0 14.7

76 127 140

1095-00-04 1095-00-06 1095-00-08

1091

P.T.F.E. HOSE, CONVOLUTED Construction Inner tube:

Convulted P.T.F.E. (Teflon®)

Reinforcement:

One braid of stainless steel wire, SS 2330

Safety factor:

4:1

Temperature:

-70°C – +230°C

Applications/Characteristics A very flexible high pressure hose due to the convulted inner tube. The hose is suitable for most hazardous environments. Large chemical resistance range, low friction and wide temperature range. Age resistant. Ferrule:

4200-30-xx, 3800-30-xx

Product group:

110

Part number 1091-00-04 1091-00-06 1091-00-08 1091-00-10 1091-00-12 1091-00-16

28

ID nom mm

ID inch

OD nom mm

WP MPa

Bend rad. mm

7.1 9.5 12.7 15.9 19.0 25.5

1/4" 3/8" 1/2" 5/8" 3/4" 1"

12.3 15.5 17.7 22.1 24.6 30.7

13.8 11.2 7.8 6.8 5.2 3.5

18 20 25 50 65 90

PRODUCT CATALOGUE 2009


1 1094

P.T.F.E. HOSE, CONVOLUTED TAPED Construction Inner tube:

Smooth P.T.F.E. (Teflon®)

Reinforcement:

One braid of stainless steel wire, SS 2330

Safety factor:

4:1

Temperature:

-54°C – +204°C

Applications/Characteristics A very flexible high pressure hose due to the convulted inner tube. The hose is suitable for most hazardous environments. Large chemical resistance range, low friction and wide temperature range. Age resistant. Ferrule:

4200-30-xx, 3800-30-xx

Product group:

110

Part number 1094-00-06 1094-00-08 1094-00-10 1094-00-12 1094-00-16 1094-00-20 1094-00-24 1094-00-32

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

9.53 12.70 16.00 19.05 25.40 31.75 38.10 50.80

3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2" 2"

15.62 19.93 23.03 26.67 32.25 39.88 45.97 58.93

6.9 8.6 9.6 7.6 6.9 6.9 5.2 3.4

25.4 38.0 50.0 63.0 76.0 88.9 114.0 133.0

Weight kg/m

ULTRA HIGH PRESSURE THERMOPLASTIC HOSES Spir Star hoses used for extreme working pressures of up to 3 200 Bar

Suitable for water cutting, steel and concrete along with applications that need very high working pressure.

Some hoses can be delivered in lengths of up to 1,200 meters.

All hoses are delivered assembled with directions and safety instructions.

All hoses are tested and certified.

The SPIR STAR hose is designed with a reinforcement of specially processed high resistance steel wire, an inner tube of Polyoxymethylene (POM) or Polyamide (PA), and a cover of Polyamide (PA) or Polyurethane (PUR). The smooth inner tube gives the hose excellent characteristics and a very low volumetric expansion. The hose is also extremely resistant to chemicals.

PRODUCT CATALOGUE 2009

>>

29


1201-11 SPIR STAR, TYPE 2W Construction Inner tube:

Polyamid / Nylon 11/12

Cover:

Polyurethane

Reinforcement:

Four spirals of steel wire

Safety factor:

2.5:1

Temperature:

-30°C – +80°C

Design:

Black

Applications/Characteristics A hose for high pressure hydraulics and water cleaning. The hose is delivered assembled with fittings according to customer demand. Product group:

Part number 1201-11-02 1201-11-04 1201-11-05 1201-11-06 1201-11-08

140

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

4.0 6.0 8.0 10.0 12.8

1/8" 1/4" 5/16" 3/8" 1/2"

9.8 11.7 13.8 16.8 20.4

140.0 128.0 100.0 100.0 100.0

65 95 110 125 150

0.16 0.23 0.29 0.43 0.59

1201-30 SPIR STAR, TYPE 4 Construction Inner tube:

Polyamid / Nylon 11/12 or POM

Cover:

Polyamid / Nylon 11/12

Reinforcement:

Four spirals of steel wire

Safety factor:

2.5:1

Temperature:

-30°C – +80°C

Design:

Grey

Applications/Characteristics A hose for high pressure hydraulics and water cleaning. The hose is delivered assembled with fittings according to customer demand. Product group:

Part number 1201-30-02 1201-30-03 1201-30-04 1201-30-05 1201-30-06 1201-30-08 1201-30-10 1201-30-12

30

140

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

4.0 5.0 6.3 8.0 9.9 12.8 16.0 19.8

1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4"

10.3 11.2 12.6 14.6 18.4 21.4 25.0 29.6

216.0 180.0 150.0 150.0 150.0 128.0 100.0 100.0

130 150 180 200 200 200 250 250

0.23 0.26 0.30 0.39 0.69 0.80 0.94 1.35

PRODUCT CATALOGUE 2009


1 1201-40 SPIR STAR, 6 Construction Inner tube:

Polyamid / Nylon 11/12

Cover:

Polyurethane

Reinforcement:

Six spirals of steel wire

Safety factor:

2.5:1

Temperature:

-30°C – +80°C

Design:

Blue

Applications/Characteristics A hose for high pressure hydraulics and water cleaning. The hose is delivered assembled with fittings according to customer demand. Product group:

Part number 1201-40-02 1201-40-03 1201-40-05 1201-40-06 1201-40-08 1201-40-12

140

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

4.0 5.0 8.0 9.8 12.8 18.8

1/8" 3/16" 5/16" 3/8" 1/2" 3/4"

11.5 13.4 16.4 20.4 23.4 31.4

280.0 262.0 200.0 192.0 168.0 140.0

175 200 250 250 300 350

0.36 0.45 0.64 1.00 1.16 1.92

1201-46 SPIR STAR, TYPE 6H Construction Inner tube:

Polyamid / Nylon 11/12 or POM

Cover:

Polyamid / Nylon 11/12

Reinforcement:

Four spirals of steel wire

Safety factor:

2.5:1

Temperature:

-30°C – +80°C

Design:

Red

Applications/Characteristics A hose for high pressure hydraulics and water cleaning. The hose is delivered assembled with fittings according to customer demand. Product group:

Part number 1201-46-03 1201-46-05

PRODUCT CATALOGUE 2009

140

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

5.0 8.0

3/16" 5/16"

13.8 17.8

280.0 250.0

220 260

0.52 0.83

31


Hydroscand Special hoses Where Nothing is impossible

At HYDROSCAND Special Hoses, we meet the increasing demands of special products. Here we produce and assembly customer adapted welded metal hoses, concrete hoses, special P.T.F.E. hoses, composite hoses, high pressure hoses for extreme pressures and other hoses where special competence is needed.

Contact your local Hydroscand depot for more information.

l a i c e p s e s S Ho


HYDROSCAND INDUSTRIAL HOSES

Table of contents

1:4

Product group 140 In our wide selection of high quality hoses, we have hoses for all application areas. We have strived to offer low weight, great flexibility and a variety of dimensions in order to meet our customers’ needs for the right hose for the right kind of fluids. With our wide range of products, Hydroscand can offer the perfect hose to fulfil the special demands of every function. Hydroscand will also commit to develop hoses in cooperation with the customers, to fulfil requests of other materials or special qualities. For industrial hose couplings, see chapter 5. For hose clamps, see chapter 5:01. Kevlar® and Teflon® are registered trademarks by DuPont.

Air pressure page

1420 1420-10 1421 1521 1521-50 1421-32 1422 1424 1424-10 1424-20 1424-30 1424-80 1425 1424-00-1690 1425-70 1426 1426-10 1429 1432-50 1456 1484 1485 1489 1481 1494

Hydroair, Air Pressure Hose, 15 Bar Falcon, Air Pressure Hose, 15 Bar Multiair, Air Pressure Hose, 20 Bar Aircomp, Compressor Hose, 180°C Aircomp Soft, Compressor Hose, 180°C Hydrobreathe, Respiration Hose Air Pressure Hose, PVC Air Pressure Hose, PVC, 20 Bar Air Pressure Hose, PVC, 40 Bar Air Pressure Hose, PVC, 15 Bar Universal PU Hose, 20 Bar Air Pressure Hose, Soft Mantex, Air Pressure Hose, Lay-Flat Flatair, Air Pressure Hose, Lay-Flat, 20 Bar Mantex HP, Air Pressure Hose, Lay-Flat Airbrake SAE J1402-A, Brake Hose Airbrake DIN 74310, Brake Hose PVC Hose, Transparent Multioil, Oil Pressure Hose, 20 Bar Yellow Python, 15 Bar Metal Hose, Parallel Wrapped Metal Hose, Tight And Parallel Wrapped Metal Hose, Parallel Wrapped, Mechanically Miniwave, Metal Hose, Parallel Wrapped Metal Hose, Spiral Wrapped

Special page

1432-10 1432-30 1580 1581 1582 1583 1584 1585 1458 1480 1484 1485 1489 1481 1494

Autooil, Fuel Hose Yachtoil SW, Marine Fuel Hose, Iso 7840 Comp LD Comp Oil 800 Comp Chem 700 Comp Temp 305 Comp P.T.F.E 300 Comp Chem LD Gas Return Caspian, Boat Sanitary Hose Gas Exhaust Hose, Stainless Steel Metal Hose, Parallel Wrapped Metal Hose, Tight And Parallel Wrapped Metal Hose, Parallel Wrapped, Mechanically Miniwave, Metal Hose, Parallel Wrapped Metal Hose, Spiral Wrapped

Hydroscand reserves the right to modify any or all parts of this catalogue without any prior notice.

PRODUCT CATALOGUE 2009

44 44 45 45 46 46 47 47 48 48 49 49 50 50 51 52 53 53 54 70 96 96 97 97 98

55 55 62 62 63 63 64 64 76 95 96 96 97 97 98

Water page

1553-90 1508 1533 1533-10 1401 1456-50 1456-30 1501 1401-10 1401-60 1402-30 1403 1404 1405 1407-10 1507-10 1409-40 1409-50 1410 1415-20 1418 1419 1422 1424-30 1424-80 1425 1424-00-1690 1425-10 1425-30 1429 1432-50 1433 1436 1456 1552 1552-10 1452 1452-10 1553 1553-10 1553-50 1454 1454-10 1454-30 1458-10 1404-30 1461-10 1484 1485 1489 1481 1494

NEW Heavy Press, forage & granulate hose 1 :4a NEW Sanitation and pressure hose PVC 1:4a NEW Oil suction and pressure hose, PVC 1:4b NEW Oil suction and pressure hose, PVC 1:4b Hydrowater, Industrial Water Hose 35 Multiwater, Flush Hose 20 Bar 35 Hyrdoheat, Heating Hose 36 Water Hose PVC 36 Pulpflush, Groove Flush Hose 37 Pumpflush Heavy Duty, Feeder Hose 15 Bar 37 Warecooler, Industrial Cooling Hose 38 Pumpflush SW, Down Pipe Hose, 10 Bar 38 Pumpflush HW, Spiral Suction Hose, 10 Bar 39 PVC Drainage Hose, Lay Flat 39 Spiral Suction Hose, Super Elastic PVC 40 Spiral Suction Hose, Extremely Elastic PVC 40 Radiator LL, Cooling Hose 3 Bar 41 Radiator Flex, Corrugated Cooling Hose 41 Carheater, Car Heating Hose 42 Aquasewer, Flushing Hose 250 42 Aquasewer, Flushing Hose Thermoplast, 200 43 Aquasewer, Flushing Hose Thermoplast, 250 43 Air Pressure Hose, PVC 47 Universal PU Hose, 20 Bar 49 Air Pressure Hose, Soft 49 Mantex, Air Pressure Hose, Lay-Flat 50 Flatair, Air Pressure Hose, Lay-Flat, 20 Bar 50 Armtex, Fire Hose 51 Getex, Fire Hose 52 PVC Hose, Transparent 53 Multioil, Oil Pressure Hose, 20 Bar 54 Oil Suction Hose, PVC 56 Cooloil, Oil Cooling Hose 60 Yellow Python, 15 Bar 70 Low-Weight Spiral Suction Hose 71 Low-Weight Spiral Suction Hose, Antistatic 72 Foodclean, Food Flush Hose 72 Foodsteam, Food Flush Hose, Steam 73 Dairymaster, Milk Hose, 6 Bar 73 Multifood, Food Hose, 10 Bar 74 Material Hose, PVC 74 Ontario, Steam Hose, 17 Bar 75 Amazonas, Steam Hose 75 Niagara, Steam Hose, DIN 2825, 18 Bar 76 Water Hose, 10 Bar 77 Sharkhose, Fish Pump Hose 77 Food Hose, Transparent 84 Metal Hose, Parallel Wrapped 96 Metal Hose, Tight And Parallel Wrapped 96 Metal Hose, Parallel Wrapped, Mechanically 97 Miniwave, Metal Hose, Parallel Wrapped 97 Metal Hose, Spiral Wrapped 98

Steam page

1452-10 1454 1454-10 1454-30 1484 1485 1489 1481 1494

Foodsteam, Food Flush Hose, Steam Ontario, Steam Hose, 17 Bar Amazonas, Steam Hose Niagara, Steam Hose, DIN 2825, 18 Bar Metal Hose, Parallel Wrapped Metal Hose, Tight And Parallel Wrapped Metal Hose, Parallel Wrapped, Mechanically Miniwave, Metal Hose, Parallel Wrapped Metal Hose, Spiral Wrapped

73 75 75 76 96 96 97 97 98

The table of contents continues on the next page.

33


Table of contents Ventilation page 1434-10 1552 1552-10 1460 1460-40 1460-45 1560-10 1460-50 1460-20 1561 1561-10 1562 1562-10 1461 1461-30 1560 1462 1462-10 1463-10 1463-40 1563-20 1563-30 1480

Exlight, Low Weight Exhaust Gas Hose Low-Weight Spiral Suction Hose Low-Weight Spiral Suction Hose, Antistatic Ventilation Hose, PVC Dry-Up Hose For Construction Sites Dry-Up Hose For Construction Sites Defrost Hose, APK Ventilation Hose, ALU Ventilation And Kitchen Fan Hose Exhaust Hose For Hot Air, Neopren Exhaust Hose For Hot Air, Neopren, Double Exhaust Hose For Hot Air, Silicone Exhaust Hose For Hot Air, Silicone, Double Ventilation And Material Suction Hose, Pvc Material Suction Hose, Self-Extinguishing Dust Suction Hose SD Industrial Dust Suction Hose, PE Industrial Dust Suction Hose, PE, Antistatic Vacuum Hose, Polyurethane Vacuum Hose, Polyurethane, Antistatic Polyurethane Hose L 0.4 Polyurethane Hose M 0.7 Gas Exhaust Hose, Stainless Steel

Oil & Gasoline page

1533 1533-10 1424-80 1425-10 1430 1432-50 1432-10 1432-30 1432-31 1433 1434 1434-10 1435 1439 1469-20 1550 1436 1436-50 1437 1438 1580 1581 1583 1584 1461-40 1484 1485 1489 1481 1494

NEW Oil suction and pressure hose, PVC 1:4b NEW Oil suction and pressure hose, PVC 1:4b Air Pressure Hose, Soft 49 Armtex, Fire Hose 51 Hydroil, Oil Pressure Hose, 10 Bar 54 Multioil, Oil Pressure Hose, 20 Bar 54 Autooil, Fuel Hose 55 Yachtoil SW, Marine Fuel Hose, Iso 7840 55 Yachtoil SW, Marine Fuel Hose, Iso 7840 56 Oil Suction Hose, PVC 56 Exmarin, Exhaust Gas / Marine Refill Hose 57 Exlight, Low Weight Exhaust Gas Hose 57 Tankoil SW, Gas Truck Hose, 10/20 Bar 58 Tankoil HW, Truck Hose With Spiral, 10 Bar 58 Gas Truck Hose EN 12115, 16 Bar 59 Asphalt, Tar And Mineral Suction Hose 59 Cooloil, Oil Cooling Hose 60 Mathilda P.T.F.E. ISO 7840A1 60 Ragoil, Fuel Hose 61 R-Four, Return & Suction Hose, SAE 100 R4 61 Comp LD 62 Comp Oil 800 62 Comp Temp 305 63 Comp P.T.F.E 300 64 Suction And Pressure Hose, PU/PVC 85 Metal Hose, Parallel Wrapped 96 Metal Hose, Tight And Parallel Wrapped 96 Metal Hose, Parallel Wrapped, Mechanically 97 Miniwave, Metal Hose, Parallel Wrapped 97 Metal Hose, Spiral Wrapped 98

Gas & welding page

1440 1441 1442 1442-10 1443 1445-10 1447 1448 1484 1485 1489 1481 1494

Weldarc, Welding Hose EN 559, 20 Bar Twinarc, Twin Welding Hose EN 559, 20 Bar Heatseaker, Liquified Petroleum Gas Hose Liquified Petroleum Gas Hose, R1AT Twin Hose, Liquified Petroleum Gas Coldseeker, AC Hose Non-Freezing Media Hose 9038 Rainbow, Carbon Dioxide Hose Metal Hose, Parallel Wrapped Metal Hose, Tight And Parallel Wrapped Metal Hose, Parallel Wrapped, Mechanically Miniwave, Metal Hose, Parallel Wrapped Metal Hose, Spiral Wrapped

34

57 71 72 78 78 79 79 80 80 81 81 82 82 83 83 84 85 86 86 87 87 88 95

65 65 66 66 67 67 68 68 96 96 97 97 98

Chemicals page

1582 1583 1584 1450 1450-10 1450-30 1456 1451-40 1454 1454-10 1454-30 1484 1485 1489 1481 1494

Comp Chem 700 Comp Temp 305 Comp P.T.F.E 300 Bushmaster, Chemical Hose, XLPE, 10 Bar Cobra, Chemical Hose, EPDM Viper, Chemical Hose, UPE / Gas Truck Yellow Python, 15 Bar Spray Paint Hose, 20 Bar Ontario, Steam Hose, 17 Bar Amazonas, Steam Hose Niagara, Steam Hose, DIN 2825, 18 Bar Metal Hose, Parallel Wrapped Metal Hose, Tight And Parallel Wrapped Metal Hose, Parallel Wrapped, Mechanically Miniwave, Metal Hose, Parallel Wrapped Metal Hose, Spiral Wrapped

63 63 64 69 69 70 70 71 75 75 76 96 96 97 97 98

Materials page 1553-90 1508 1533 1533-10 1401-10 1507-10 1552-10 1553-50 1461 1461-30 1560 1461-10 1461-40 1462 1462-10 1463-10 1463-40 1563-20 1563-30 1563-50 1563-70 1464 1464 1464-10 1464-50 1465-30 1565 1466 1467-45 1467-51 1467-52 1567 1468 1480

NEW Heavy Press, forage & granulate hose 1 :4a NEW Sanitation and pressure hose PVC 1:4a NEW Oil suction and pressure hose, PVC 1:4b NEW Oil suction and pressure hose, PVC 1:4b Pulpflush, Groove Flush Hose 37 Spiral Suction Hose, Extremely Elastic PVC 40 Low-Weight Spiral Suction Hose, Antistatic 72 Material Hose, PVC 74 Ventilation And Material Suction Hose, PVC 83 Material Suction Hose, Self-Extinguishing 83 Dust Suction Hose SD 84 Food Hose, Transparent 84 Suction And Pressure Hose, PU/PVC 85 Industrial Dust Suction Hose, PE 85 Industrial Dust Suction Hose, PE, Antistatic 86 Vacuum Hose, Polyurethane 86 Vacuum Hose, Polyurethane, Antistatic 87 Polyurethane Hose L 0.4 87 Polyurethane Hose M 0.7 88 Polyurethane Hose H 1.4 88 Polyurethane Hose HD T 2.0 89 Sandstone, Blasting Hose, 10 Bar 89 Sandstone, Blasting Hose, 10 Bar 89 Marble, Concrete Cast Hose, 40 Bar 90 Shale, Concrete Pump Hose, 80 Bar 90 Limestone, Concrete & Granulate Hose 91 Chloriet, Material Hose, Lay-Flat 91 Dolmite, Industrial Dust Suction Hose 92 Slate, Sanitation Suction Hose, M45 92 Coal, Sanitation Suction Hose, M51 93 Granulite, Transportation Hose M52 93 Gneiss, Sanitation Suction Hose 94 Material Hose PVC/PU 94 Gas Exhaust Hose, Stainless Steel 95

Food & beverage page 1553-90 1521 1521-50 1422 1424-30 1448 1450-30 1552 1552-10 1452 1452-10 1553 1553-10 1553-50 1458-10 1404-30 1461-10 1461-40 1463-10 1463-40 1563-30 1563-50 1563-70

NEW Heavy Press, forage & granulate hose 1 :4a Aircomp, Compressor Hose, 180째C 45 Aircomp, Compressor Hose, 180째C 46 Air Pressure Hose, PVC 47 Universal PU Hose, 20 Bar 49 Rainbow, Carbon Dioxide Hose 68 Viper, Chemical Hose, UPE / Gas Truck 70 Low-Weight Spiral Suction Hose 71 Low-Weight Spiral Suction Hose, Antistatic 72 Foodclean, Food Flush Hose 72 Foodsteam, Food Flush Hose, Steam 73 Dairymaster, Milk Hose, 6 Bar 73 Multifood, Food Hose, 10 Bar 74 Material Hose, PVC 74 Water Hose, 10 Bar 77 Sharkhose, Fish Pump Hose 77 Food Hose, Transparent 84 Suction And Pressure Hose, PU/PVC 85 Vacuum Hose, Polyurethane 86 Vacuum Hose, Polyurethane, Antistatic 87 Polyurethane Hose M 0.7 88 Polyurethane Hose H 1.4 88 Polyurethane Hose HD T 2.0 89

PRODUCT CATALOGUE 2009


NEW 1553-90 HEAVY PRESS, FORAGE & GRANULATE HOSE

1:4

Construction Inner tube:

PU/PVC white

Cover:

PU/PVC

Reinforcement:

Synthetic textile

Safety factor:

3:1

Temperature:

-25°C – +60°C

Design:

Smooth, white

Applications/Characteristics Duralbe, food approved, pressure hose for transportation of powder granualtes, cement and forage. Also suitable for water. Product group: Part number 1553-90-32 1553-90-39 1553-90-48 1553-90-64

141 ID mm

OD mm

51.0 60.0 76.0 102.0

66.0 76.0 94.0 120

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

1.0 1.0 1.0 0.7

1.65 1.75 2.75 3.40

20 20 20 20

NEW 1508 SANITATION SUCTION AND PRESSURE HOSE, PVC Construction Inner tube:

PVC/NBR

Cover:

PVC/NBR

Reinforcement:

Embedded spiral

Safety factor:

3:1

Temperature:

-40°C – +60°C

Design:

Lightly corrugated, silver grey, internally smooth

Applications/Characteristics Super elastic and flexible suction and pressure hose for low temperatures. The low weight makes it suitable for sludge suction, draining of sump and for transportation of foods and fertilizers. Product group: Part number 1508-00-32 1508-00-48 1508-00-64 1508-00-80

NEWS PRODUCT CATALOGUE 2009

141 ID mm

OD mm

51.0 76.0 102.0 127.0

61.0 88.0 115.0 142.0

Work pr. Bend rad. MPa mm 0.50 0.40 0.30 0.20

170 240 320 620

Weight Vaccum pr. kg/m Max % 1.05 1.75 2.70 3.60

90 90 90 90

Length m/coil 50 50 50 50

1:4 a


NEW 1533 OIL SUCTION AND PRESSURE HOSE, PVC Construction Inner tube:

PVC/NBR

Cover:

PVC/NBR

Reinforcement:

Embedded spiral

Safety factor:

3:1

Temperature:

-25°C – +60°C

Design:

Lightly corrugated, blue, internally smooth

Applications/Characteristics A super elastic oil resistant suction and pressure hose for paraffins, grease oils, mineral based hydraulic oils, diesel, sludge and water etc. Low weight and very flexible. Product group: Part number 1533-00-12 1533-00-16 1533-00-20 1533-00-24 1533-00-32 1533-00-40 1533-00-48 1533-00-64

141 ID mm

OD mm

19.0 25.0 32.0 38.0 51.0 63.0 76.0 102.0

26.0 34.0 41.0 48.0 61.0 75.0 88.0 116.0

Work pr. Bend rad. MPa mm 0.80 0.80 0.70 0.70 0.70 0.60 0.60 0.40

100 100 150 180 200 230 250 350

Weight Vaccum pr. kg/m Max % 0.50 0.60 0.70 0.80 1.20 1.65 2.00 3.30

90 90 90 90 90 90 90 90

Length m/coil 50 50 50 50 50 50 50 50

NEW 1533-10 OIL SUCTION AND PRESSURE HOSE, PVC ANTISTATIC Construction Inner tube:

PVC/NBR

Cover:

PVC/NBR

Reinforcement:

Embedded spiral

Safety factor:

3:1

Temperature:

-25°C – +60°C

Design:

Lightly corrugated, blue with longitudal antistatic braid, internally smooth

Applications/Characteristics A super elastic oil resistant suction and pressure hose for paraffins, grease oils, mineral based hydraulic oils, diesel, sludge and water etc. The hose has a longitudal antistatic copper braid. Low weight and very flexible. Product group:

Part number 1533-10-12 1533-10-16 1533-10-20 1533-10-32 1533-10-40 1533-10-48

1:4 b

141

ID mm

OD mm

19.0 25.0 32.0 51.0 63.0 76.0

26.0 34.0 41.0 61.0 75.0 88.0

Work pr. Bend rad. MPa mm 0.60 0.80 0.70 0.70 0.60 0.50

90 100 150 200 230 250

Weight Vaccum pr. kg/m Max % 0.45 0.60 0.70 1.20 1.65 2.00

90 90 90 90 90 90

Length m/coil 50 30 30 50 50 50

NEWS PRODUCT CATALOGUE 2009


1401

HYDROWATER, INDUSTRIAL WATER HOSE 10/12 BAR

1:4

Construction Inner tube:

Synthetic rubber (SBR)

Cover:

Weather and abrasion resistant rubber (SBR/EPDM)

Reinforcement:

Synthetic textile

Safety factor:

3:1

Temperature:

-30°C – +80°C

Design:

Smooth, red. Wrapped from 32 mm.

Applications/Characteristics A flush hose for industries, construction sites, sports parks and wash halls. Easy to handle, low weight, durable and weather resistant. Product group: Part number 1401-00-08 1401-00-10 1401-00-12 1401-00-16 1401-00-20 1401-00-24 1401-00-25 1401-00-32 1401-00-40 1401-00-48 1401-00-64 1401-00-96

140 ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

13.0 16.0 19.0 25.0 32.0 38.0 45.0 50.0 63.0 75.0 102.0 152.0

19.0 23.0 26.0 33.0 42.0 48.0 55.0 60.0 73.0 86.0 114.0 162.0

1.2 1.2 1.2 1.2 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0

80 100 110 150 192 228 271 300 381 450 800 1220

0.24 0.34 0.40 0.58 0.89 1.02 1.20 1.31 1.63 2.20 3.69 4.80

50 50 50 50 40 40 40 40 40 40 40 40

1456-50 MULTIWATER, FLUSH HOSE 20 BAR Construction Inner tube:

Black smooth (EPDM)

Cover:

EPDM

Reinforcement:

Synthetic textile

Safety factor:

3:1

Temperature:

-40°C – +120°C

Design:

Smooth black with red longitudinal stripes

Applications/Characteristics A flush and cleaning hose for cold and warm water for industry and agriculture. An exceptional flexibility combined with good temperature characteristics. Product group:

Part number 1456-50-08 1456-50-12 1456-50-16

PRODUCT CATALOGUE 2009

140

ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

13.0 19.0 25.0

19.0 27.0 34.0

2.0 2.0 2.0

75 110 150

0.21 0.40 0.57

40 40 40

35


1456-30 HYRDOHEAT, HEATING HOSE FOR CONSTRUCTION SITES Construction Inner tube:

EPDM

Cover:

EPDM

Reinforcement:

Synthetic textile

Safety factor:

3:1

Temperature:

-40°C – +100°C

Design:

Smooth, grey (except 1" which is black)

Applications/Characteristics A wear resistant hose for transportation of hot water, especially in the construction industry. Regularly used as heating hose at construction sites. Product group:

Part number 1456-30-16 1456-30-20 1456-30-24 1456-30-32

1501

140

ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

25.0 32.0 38.0 51.0

35.0 43.0 50.0 63.0

1.0 0.5 0.5 0.5

150 350 400 500

0.63 0.91 1.13 1.46

60 60 60 60

WATER HOSE PVC Construction Inner tube:

PVC

Cover:

PVC

Reinforcement:

Knitted textile

Safety factor:

2.5:1

Temperature:

-5°C – +60°C

Design:

Smooth, yellow

Applications/Characteristics A very resistant and soft knitted textile hose. The inner tube is made of a first class, food approved PVC material. Used in construction and shipbuilding industries, as well as for irrigation. Product group: Part number 1501-25-08 1501-50-08 1501-25-12 1501-50-12 1501-25-16 1501-50-16

36

140 ID mm

OD mm

13.0 13.0 19.0 19.0 25.0 25.0

18.0 18.0 25.0 25.0 32.0 32.0

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

1.0 1.0 1.0 1.0 0.8 0.8

0.14 0.14 0.25 0.25 0.36 0.36

25 50 25 50 25 50

PRODUCT CATALOGUE 2009


1401-10 PULPFLUSH, GROOVE FLUSH HOSE

1:4

Construction Inner tube:

SBR

Cover:

SBR/EPDM

Reinforcement:

Textile, spiral lacing

Safety factor:

3:1

Temperature:

-40°C – +80°C

Design:

Corrugated with flush tube, red

Applications/Characteristics The hose is used in the paper industry for slushing paper barrels. The external corrugation of the hose prevents dust formations on the floor. Product group:

Part number 1401-10-12 1401-10-16 1401-10-20 1401-10-24

140

ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

20.0 25.0 32.0 40.0

31.0 36.0 43.0 51.0

1.0 1.0 1.0 1.0

120 150 190 240

0.70 0.81 0.95 1.15

20 10,15,20 15,20 20

1401-60 PUMPFLUSH HEAVY DUTY, FEEDER HOSE 15 BAR Construction Inner tube:

SBR

Cover:

Abrasion and weather resistent EPDM

Reinforcement:

Two layers of synthetic textile

Safety factor:

3:1

Temperature:

-40°C – +75°C

Design:

Wrapped, black

Applications/Characteristics Especially designed as a pressure hose for drainage pumps and irrigation systems. Also very suitable for industry and mining. Resists pressure peaks and a very large external abrasion. Can be laid flat for transportation and storage. Product group: Part number 1401-60-64 1401-60-80 1401-60-96

PRODUCT CATALOGUE 2009

140 ID mm

OD mm

102.0 127.0 152.0

112.0 137.0 164.0

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

1.5 1.5 1.5

1.92 2.37 3.35

40 40 40

37


1402-30 WARECOOLER, INDUSTRIAL COOLING HOSE Construction Inner tube:

EPDM

Cover:

EPDM rubber with a ceramic fibre cord

Reinforcement:

Synthetic textile

Safety factor:

3:1

Temperature:

-40°C – +120°C

Design:

White

Applications/Characteristics Used as a protection and cooling hose where the working temperature is high, e.g. melting furnaces and foundries. The cover cord is made of ceramic fibres, which gives the hose a good resistance towards flames. Sustains 1,100° C temporary radiation as well as glowing steel spatter. Electrical resistance: 106 Ohm/m. Product group: Part number 1402-30-08 1402-30-10 1402-30-12 1402-30-16 1402-30-20 1402-30-24 1402-30-32 1402-30-40 1402-30-48 1402-30-64

1403

141 ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

13.0 16.0 19.0 25.0 32.0 38.0 51.0 63.5 76.0 102.0

23.0 26.0 30.0 38.0 45.0 58.0 65.0 80.0 95.0 124.0

1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0

120 150 200 250 320 380 500 650 800 1,000

0.45 0.48 0.58 0.77 0.91 1.30 1.89 2.47 3.44 5.12

40 40 40 40 40 40 40 40 40 40

PUMPFLUSH SW, DOWN PIPE HOSE, 10 BAR, LAY FLAT Construction Inner tube:

Synthetic rubber (SBR)

Cover:

Weather resistant synthetic rubber (SBR)

Reinforcement:

Synthetic textile

Safety factor:

3:1

Temperature:

-30°C – +80°C

Design:

Wrapped, black

Applications/Characteristics The hose is used as a down pipe for irrigation, gardening and sport parks. Can be laid flat for simple storage and transportation. Product group:

Part number 1403-00-16 1403-00-20 1403-00-24 1403-00-32 1403-00-40 1403-00-48 1403-00-64

38

141

ID mm

OD mm

25.0 32.0 38.0 50.0 63.5 75.0 100.0

31.0 38.0 45.0 57.0 70.5 82.0 108.0

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

1.0 1.0 1.0 1.0 1.0 1.0 1.0

0.38 0.47 0.65 0.83 1.04 1.20 1.78

40 40 40 40 40 20 20

PRODUCT CATALOGUE 2009


1404

PUMPFLUSH HW, SPIRAL SUCTION HOSE, 10 BAR

1:4

Construction Inner tube:

Synthetic rubber (SBR)

Cover:

Weather resistant synthetic rubber (SBR)

Reinforcement:

Synthetic textile with a spiral of steel

Safety factor:

3:1

Temperature:

-30°C – +80°C

Design:

Wrapped, black

Applications/Characteristics Suction hose for pumps, sewage, well-cleaning and tank tipping. Can be used on both the pressure side as well as the suction side of the pump. Product group:

1405

141

Part number

ID mm

OD mm

1404-00-20 1404-00-24 1404-00-32 1404-00-48 1404-00-64

32 42.0 38 48.0 50 60.0 75 86.5 100 114.0

Work pr. Bend rad. Weight Vaccum pr. Length MPa mm kg/m Max % m/coil 1.0 1.0 1.0 1.0 1.0

190 230 300 450 600

1.01 1.16 1.50 2.75 3.98

80 80 80 80 80

40 40 40 20 20

PVC DRAINAGE HOSE, LAY FLAT Construction Inner tube:

PVC

Cover:

PVC

Reinforcement:

Synthetic textile

Safety factor:

3:1

Temperature:

-20°C – +60°C

Design:

Smooth, blue

Applications/Characteristics A wear resistant and durable drainage hose for pump applications. Can also be used as hose protection. Can be laid flat for transportation and storage. Other dimensions and pressure classes are available upon request. The working pressures mentioned below are valid at +20°C. Product group: Part number 1405-00-12 1405-00-16 1405-00-20 1405-00-24 1405-00-32 1405-00-40 1405-00-48 1405-00-64 1405-00-80 1405-00-96 1405-02-04 1405-02-50

PRODUCT CATALOGUE 2009

141 ID mm

OD mm

19.0 26.0 33.0 40.0 52.0 65.0 77.0 103.0 128.0 153.0 207.0 257.0

21.6 29.0 35.9 42.6 54.7 68.0 80.4 106.5 132.0 157.0 212.0 262.2

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

0.7 0.7 0.7 0.5 0.5 0.4 0.4 0.3 0.3 0.3 0.2 0.2

0.11 0.17 0.20 0.21 0.27 0.38 0.53 0.70 0.94 1.18 2.90 2.65

100 100 100 100 100 100 100 100 100 100 50 50

39


1407-10 SPIRAL SUCTION HOSE, SUPER ELASTIC PVC Construction Inner tube:

PVC

Cover:

PVC

Reinforcement:

PVC spiral

Safety factor:

3:1

Temperature:

-25°C – +55°C

Design:

Corrugated, green-grey

Applications/Characteristics A suction hose for sewage trucks, grains and fertilizing. Pliable and flexible at low temperatures. The extra hard PVC spiral gives an extraordinary protection against external abrasion. Product group:

Part number 1407-10-16 1407-10-20 1407-10-24

141

ID mm

OD mm

WP MPa

Bend rad. mm

Weight kg/m

Vaccum pr. max %

Length m/coil

25 32 38

33.8 40.8 46.8

0.7 0.6 0.6

100 130 150

0.50 0.60 0.70

90 90 90

50 50 50

1507-10 SPIRAL SUCTION HOSE, EXTREMELY ELASTIC PVC Construction Inner tube:

PVC

Cover:

PVC

Reinforcement:

PVC spiral

Safety factor:

3:1

Temperature:

-40°C – +55°C

Design:

Corrugated, dark green-grey

Applications/Characteristics A suction hose for sewage truck, grains and fertilizing. Extremely pliable and flexible at low temperatures. The extra hard PVC spiral gives an extraordinary protection against external abrasion and friction. Product group:

40

141

Part number

ID mm

OD mm

WP MPa

Bend rad. mm

Weight kg/m

1507-10-32 1507-10-40 1507-10-48 1507-10-64 1507-10-80 1507-10-96

50 63 76 102 127 152

61.0 74.0 89.0 116.6 143.6 170.0

0.35 0.30 0.30 0.20 0.20 0.15

175 210 260 300 445 525

1.05 1.39 1.70 2.70 3.90 5.00

Vaccum pr. max %

Length m/coil

80 30 & 50 80 50 80 50 80 30 80 20 70 20

PRODUCT CATALOGUE 2009


1409-40 RADIATOR LL, COOLING HOSE 3 BAR

1:4

Construction Inner tube: Cover: Reinforcement: Safety factor: Temperature: Design:

EPDM EPDM Synthetic textile 3:1 -40°C – +95°C, temporarily +120°C Wrapped, black

Applications/Characteristics A hose suitable for cooling systems, hot water, glycol etc. Also for some chemicals. Product group: 141 Part number 1409-40-12 1409-40-14 1409-40-16 1409-40-18 1409-40-20 1409-40-22 1409-40-24 1409-40-30 1409-40-31 1409-40-32 1409-40-38 1409-40-39 1409-40-40 1409-40-44 1409-40-48 1409-40-51 1409-40-56 1409-40-64

ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

20.0 22.0 25.0 28.0 32.0 35.0 38.0 45.0 48.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 90.0 100.0

26.5 28.5 32.0 36.0 40.0 43.0 47.0 54.0 57.0 60.0 65.0 70.0 76.0 81.0 86.0 92.0 102.0 113.0

0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3

240 260 300 340 380 420 460 540 580 600 660 720 720 770 830 880 990 1120

0.32 0.34 0.39 0.50 0.55 0.60 0.73 0.85 0.91 1.07 1.17 1.26 1.54 1.65 1.75 2.05 2.29 2.63

80 80 40 40 40 40 40 40 40 40 40 40 20 20 20 20 20 20

1409-50 RADIATOR FLEX, CORRUGATED COOLING HOSE Construction Inner tube:

Heat resistant EPDM rubber

Cover:

Abrasion, heat and partly oil resistant rubber (CR)

Reinforcement:

Synthetic textile with one steel spiral

Safety factor:

3:1

Temperature:

-40°C – +120°C

Design:

Corrugtated, black

Applications/Characteristics The hose is used as a cooling hose in vehicles where there is a requirement for high flexibility. Its special corrugation allows hard bends without folding. Also used as a hot water hose in the industry. Product group: Part number 1409-50-10 1409-50-12 1409-50-14 1409-50-16 1409-50-18 1409-50-20 1409-50-22 1409-50-24 1409-50-30 1409-50-32 1409-50-38 1409-50-44

PRODUCT CATALOGUE 2009

141 ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

16.0 20.0 22.0 25.0 28.0 32.0 35.0 38.0 45.0 50.0 55.0 70.0

24.0 28.0 30.0 33.0 35.0 40.0 43.0 46.0 54.0 59.0 65.0 80.0

0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5

80 100 115 125 140 160 175 190 225 250 275 350

0.30 0.38 0.42 0.46 0.50 0.73 0.79 0.84 0.98 1.08 1.18 1.47

40 40 40 40 40 40 40 40 40 40 40 40

41


1410

CARHEATER, CAR HEATING HOSE Construction Inner tube:

Heat resistant EPDM rubber

Cover:

Abrasion and weather resistant rubber (EPDM)

Reinforcement:

Synthetic textile

Safety factor:

3:1

Temperature:

-40°C – +100°C, temporarily +120°C

Design:

Smooth, black

Applications/Characteristics Suitable hose for cooling and heating systems on vehicles, including where pressure and heat is required. The hose is resistant to glycol and light chemicals. Product group:

Part number 1410-00-06 1410-00-08 1410-00-10 1410-00-12

141

ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

10.0 13.0 16.0 19.0

16.0 19.0 23.0 27.0

1.0 1.0 1.0 1.0

60 80 100 115

0.16 0.20 0.29 0.39

100 100 100 80

1415-20 AQUASEWER, FLUSHING HOSE 250 BAR Construction Inner tube:

Synthetic rubber (SBR)

Cover:

Abrasion and weather resistant rubber (SBR/NR)

Reinforcement:

Two layers of textile

Safety factor:

3:1

Temperature:

-35°C – +80°C

Design:

Smooth, black

Applications/Characteristics A hose for high pressure flushing of sewers and sewage systems. Its abrasion proof cover and textile reinforcement make it flexible and very easy to handle. Pre-assembled with an internal and external thread (BSP). Product group: Part number 1415-20-08 1415-20-12 1415-20-16 1415-20-20 1415-20-24

42

141 ID mm

OD mm

13.0 19.0 25.0 32.0 38.0

25.6 31.6 39.3 47.6 54.0

Work pr. Bend rad. MPa mm 25.0 25.0 25.0 25.0 25.0

70 90 100 130 155

Weight kg/m

Length m/coil

0.45 0.62 0.88 1.14 1.35

40-60-80-120 40-80-120 40-80-120-160-180 40-80-120-160-180 120

PRODUCT CATALOGUE 2009


1418

AQUASEWER, FLUSHING HOSE THERMOPLAST, 200 BAR

1:4

Construction Inner tube:

Polyurethane (PU)

Cover:

Polyurethane (PU)

Reinforcement:

Two braids of nylon

Safety factor:

2.61:1

Temperature:

-40°C – +60°C

Design:

Smooth, yellow

Applications/Characteristics A hose suitable for high pressure sewage systems. The hose has low weight compared to rubber hoses, which leads to less abrasion and increased flowing speed. The hose sustains 3–4 times more external abrasion compared to a traditional rubber hose. It is delivered pre-assembled with fittings according to demand. Product group: Part number 1418-06-12 1418-08-12 1418-12-12 1418-06-16 1418-08-16 1418-12-16

1419

141 ID mm

OD mm

20.0 20.0 20.0 25.0 25.0 25.0

31.5 31.5 31.5 38.7 38.7 38.7

Work pr. Bend rad. Weight MPa mm kg/m 20.0 20.0 20.0 20.0 20.0 20.0

120 120 120 155 155 155

0.49 0.49 0.49 0.61 0.61 0.61

Burst pr. Length MPa m/coil 52.0 52.0 52.0 52.0 52.0 52.0

60 80 120 60 80 120

AQUASEWER, FLUSHING HOSE THERMOPLAST, 250 BAR Construction Inner tube:

Polyethylene (PE)

Cover:

Polyurethane (PU)

Reinforcement:

Two braids of nylon

Safety factor:

2.61:1

Temperature:

-40°C – +60°C

Design:

Smooth, blue

Applications/Characteristics A hose suitable for high pressure sweage systems. The hose has low weight compared to rubber hoses, which leads to less abrasion and increased flowing speed. The hose sustains 3–4 times more external abrasion compared to a traditional rubber hose. It is delivered pre-assembled with fittings according to demand. Product group: Part number 1419-06-08 1419-08-08 1419-12-08 1419-06-12 1419-08-12 1419-12-12 1419-06-16 1419-08-16 1419-12-16

PRODUCT CATALOGUE 2009

141 ID mm

OD mm

13.0 13.0 13.0 19.6 19.6 19.6 25.9 25.9 25.9

22.8 22.8 22.8 30.3 30.3 30.3 37.9 37.9 37.9

Work pr. Bend rad. Weight MPa mm kg/m 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0

75 75 75 120 120 120 155 155 155

0.29 0.29 0.29 0.29 0.49 0.29 0.62 0.62 0.62

Burst pr. Length MPa m/coil 62.5 62.5 62.5 62.5 62.5 62.5 62.5 62.5 62.5

60 80 120 60 80 120 60 80 120

43


1420

HYDROAIR, AIR PRESSURE HOSE, 15 BAR Construction Inner tube:

Synthetic rubber (SBR)

Cover:

Abrasion resistant synthetic rubber (SBR)

Reinforcement:

Synthetic textile

Safety factor:

3:1

Temperature:

-30°C – +70°C

Design:

Smooth, black. Wrapped from 32 mm

Applications/Characteristics This air pressure hose is suitable for most applications, tools, air pressure units and rock drills etc. Used in engineering, mining and construction industries. Sustains oil mist. Product group: Part number 1420-00-04 1420-00-05 1420-00-06 1420-00-08 1420-00-10 1420-00-12 1420-00-16 1420-00-20 1420-00-24 1420-00-32 1420-00-40 1420-00-48 1420-00-64

142 ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

6.0 8.0 10.0 13.0 16.0 19.0 25.0 32.0 38.0 50.0 63.5 75.0 100.0

12.0 15.0 17.0 21.0 26.0 29.0 36.0 44.0 52.0 65.0 78.5 90.0 115.0

1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5

50 65 80 105 130 150 200 320 380 500 650 750 1000

0.13 0.19 0.22 0.32 0.49 0.57 0.79 0.94 1.42 1.98 2.42 2.80 3.55

40 100 40 40 40 40 40 40 40 40 40 40 40

1420-10 FALCON, AIR PRESSURE HOSE, 15 BAR Construction Inner tube:

Synthetic rubber (SBR)

Cover:

SBR/EPDM rubber

Reinforcement:

Synthetic textile

Safety factor:

3:1

Temperature:

-20°C – +80°C

Design:

Yellow. Wrapped from 32 mm

Applications/Characteristics Air pressure hose for most applications, tools, air pressure units and rock drills etc. Used in engineering, mining and construction industries. Sustains oil mist. Product group: Part number 1420-10-04 1420-10-06 1420-10-08 1420-10-12 1420-10-16

44

142 ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

6.0 10.0 13.0 19.0 25.0

12.0 17.0 21.0 27.0 35.0

1.5 1.5 1.5 1.5 1.5

50 80 105 150 200

0.13 0.22 0.32 0.43 0.71

40/60 40/60 40/60 40/60 40/60

PRODUCT CATALOGUE 2009


1421 MULTIAIR, AIR PRESSURE HOSE, 20 BAR

1:4

Construction Inner tube:

Synthetic rubber (SRB)

Cover:

Abrasion resistant synthetic rubber (SBR/EPDM)

Reinforcement:

Synthetic textile

Safety factor:

3:1

Temperature:

-30°C – +80°C

Design:

Smooth, black

Applications/Characteristics Air pressure hose for applications where there is a high demand for abrasion resistance and high working pressures. Suitable in engineering, mining and construction industries. Sustains oil mist. Product group: Part number 1421-00-04 1421-00-05 1421-00-06 1421-00-08 1421-00-10 1421-00-12 1421-00-16

1521

142 ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

6.0 8.0 10.0 13.0 16.0 19.0 25.0

14.0 17.0 19.0 23.0 26.0 30.0 37.0

2.0 2.0 2.0 2.0 2.0 2.0 2.0

50 65 80 105 130 150 200

0.19 0.23 0.31 0.43 0.50 0.64 0.88

100 100 100 100 80 80 50

AIRCOMP, COMPRESSOR HOSE, 180°C Construction Inner tube:

White, food classed

Cover:

EPDM

Reinforcement:

Synthetic textile with one steel spiral

Safety factor:

4:1

Temperature:

-40°C – +180°C

Design:

Wrapped, blue

Applications/Characteristics A hose for air connections from compressors on trucks for bulk transportation of powder products. The hose is highly pliable and sustains high temperatures. The cover is weather and ozone resistant. Product group: Part number 1521-10-32 1521-10-48 1521-10-64

PRODUCT CATALOGUE 2009

142 ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

51.0 76.0 102.0

63.0 90.0 116.0

1.0 1.0 1.0

175 270 400

1.70 2.74 4.12

40 40 40

45


1521-50 AIRCOMP SOFT, COMPRESSOR HOSE, 180°C Construction Inner tube:

White, food classed, heat resistent ERP

Cover:

Weather and ozone resistent EPDM

Reinforcement:

Synthetic textile

Safety factor:

3:1

Temperature:

-40°C – +180°C

Design:

Wrapped, blue

Applications/Characteristics A hose for air connections from compressors on trucks for bulk transportation of powder products. The hose sustains high temperatures. The cover is weather and ozone resistant. Product group: Part number 1521-50-48 1521-50-56 1521-50-64

142 ID mm

OD mm

Work pr. MPa

Weight kg/m

Length m/coil

76.0 90.0 102.0

94.0 108.0 120.0

1.0 1.0 1.0

2.63 3.46 4.02

40 40 40

1421-32 HYDROBREATHE, RESPIRATION HOSE EN 14593, EN 14594 Construction Inner tube:

Hytrel

Cover:

NBR/PVC

Reinforcement:

Synthetic textile

Safety factor:

4:1

Temperature:

-20°C – +60°C

Design:

Smooth, blue

Applications/Characteristics A flexible hose for air supply in fresh air machines during sand blasting, painting and welding. Light, and does not crease. Anti-static < 106 Ohm/m. Certified according to EN 14593 and EN 14594 (replacing certification EN139). Not for underwater-use. Product group: Part number 1421-32-04 1421-32-06 1421-32-08

46

142 ID mm

OD mm

Work pr. MPa

Burst pr. MPa

6.0 10.0 12.7

12.0 16.0 19.0

1.5 1.5 1.5

6.0 6.0 6.0

Bend rad. Weight Length mm kg/m m/coil 40 40 80

0.10 0.20 0.20

50 50 50

PRODUCT CATALOGUE 2009


1422

AIR PRESSURE HOSE, PVC

1:4

Construction Inner tube:

PVC

Cover:

PVC

Reinforcement:

Polyester

Safety factor:

3:1

Temperature:

-20°C – +60°C

Design:

Smooth, transparent

Applications/Characteristics This hose is used for compressed air and for transportation of water. It is especially suitable for indoor use. Not for gasoline use. Food approved. Product group: Part number 1422-00-04 1422-00-05 1422-00-06 1422-00-08 1422-00-10 1422-00-12 1422-00-16 1422-00-20 1422-00-24 1422-00-32

1424

142 ID mm

OD mm

Work pr. at 20° C,MPa

Bend rad. mm

Weight kg/m

Length m/coil

6.3 8.0 10.0 12.5 16.0 19.0 25.0 32.0 38.0 50.0

12.0 14.0 16.0 19.0 22.0 26.0 33.0 42.0 48.0 62.0

2.0 1.8 1.8 1.2 1.0 1.0 0.8 0.8 0.8 0.8

30 40 55 75 100 120 175 225 295 415

0.08 0.10 0.12 0.16 0.21 0.30 0.44 0.70 0.82 1.28

50 50 50 50 50 50 25/50 25 25 25

AIR PRESSURE HOSE, PVC, 20 BAR Construction Inner tube:

PVC

Cover:

PVC

Reinforcement:

Polyester

Safety factor:

3:1

Temperature:

-15°C – +60°C

Design:

Smooth, beige

Applications/Characteristics Quality hose for compressed air tools. Extremely flexible, weather resistant and durable. The hose is easy to handle even at low temperatures. Product group:

Part number 1424-00-04 1424-00-05 1424-00-06 1424-00-08 1424-00-10 1424-00-12 1424-00-16

PRODUCT CATALOGUE 2009

142

ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

6.3 8.0 10.0 12.7 16.0 19.0 25.0

11.0 13.0 15.5 19.0 23.0 26.5 33.5

2.0 2.0 2.0 2.0 2.0 2.0 2.0

45 56 70 89 112 133 175

0.08 0.10 0.14 0.20 0.27 0.33 0.48

50 50 50 50 50 50 50

47


1424-10 AIR PRESSURE HOSE, PVC, 40 BAR Construction Inner tube:

PVC

Cover:

PVC

Reinforcement:

Braid of textile

Safety factor:

3:1

Temperature:

-15°C – +60°C

Design:

Smooth, blue

Applications/Characteristics A flexible PVC hose for high air pressures. Used in the industry and agriculture. Product group:

Part number 1424-10-04 1424-10-06 1424-10-08 1424-10-10 1424-10-12 1424-10-16

142

ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

6.3 10.0 12.0 16.0 19.0 25.0

12.5 17 20 24 28 35

4.0 4.0 4.0 4.0 4.0 4.0

44 70 84 112 133 175

0.12 0.20 0.26 0.32 0.40 0.61

50 50 50 50 50 50

1424-20 AIR PRESSURE HOSE, PVC, 15 BAR Construction Inner tube:

PVC

Cover:

PVC

Reinforcement:

Polyester fibre

Safety factor:

4:1

Temperature:

-20°C – +60°C

Design:

Smooth, light blue with matt finish

Applications/Characteristics A very light, flexible and cold resistant hose for compressed air units and tools such as jack hammers, griding machines, breakers, riveters, air chisels ect. This hose is used within mechanical mining and construction industries. It is also suitable for water. Resistant to oil mist. Product group: Part number 1424-20-04 1424-20-05 1424-20-06 1424-20-08 1424-20-10 1424-20-12 1424-20-16

48

142 ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

6.3 8.0 10.0 12.7 16.0 19.0 25.0

11.0 13.0 15.5 19.0 23.0 26.5 33.5

1.5 1.5 1.5 1.5 1.5 1.5 1.5

45 56 70 89 112 133 175

0.08 0.10 0.14 0.20 0.27 0.33 0.49

50 50 50 50 50 50 50

PRODUCT CATALOGUE 2009


1424-30 UNIVERSAL PU HOSE, 20 BAR

1:4

Construction Inner tube:

PU

Cover:

PVC/NBR

Reinforcement:

Synthetic textile

Safety factor:

3:1

Temperature:

-15°C – +60°C

Design:

Smooth, green

Applications/Characteristics A very light hose, only 2/3 of a conventional PVC or rubber hose. It is very flexible and has a high ozone resistance. It is also resistant towards lubricates, oils and non-aggressive chemicals. Well suited for pneumatic tools and sandblasting. Food quality. Product group:

Part number 1424-30-04 1424-30-05 1424-30-06 1424-30-08 1424-30-10

142

ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

6.0 8.0 10.0 13.0 16.0

10.0 12.0 15.0 19.0 23.0

2.0 2.0 2.0 2.0 2.0

20 22 38 55 60

0.07 0.11 0.13 0.20 0.25

100 60 50 30 25

1424-80 AIR PRESSURE HOSE, SOFT Construction Inner tube:

Buna/PU/PVC

Cover:

Buna/PU/PVC

Reinforcement:

Textile

Safety factor:

3:1

Temperature:

-30°C – +80°C

Design:

Smooth, blue

Applications/Characteristics Air pressure hose with extreme flexibility at low temperatures. Oil and abrasion resistant hose suitable as air gun hose. Product group:

Part number 1424-80-04 1424-80-05 1424-80-06 1424-80-08

PRODUCT CATALOGUE 2009

142

ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

6.0 8.0 9.5 12.7

12.0 14.0 15.5 19.5

2.0 1.5 1.5 1.2

25.0 30.0 40.0 50.0

0.11 0.13 0.14 0.23

50.0 50.0 50.0 50.0

49


1425 MANTEX, AIR PRESSURE HOSE, LAY-FLAT Construction Inner tube:

Abrasion and oil resistant PVC/NBR

Cover:

Abrasion and oil resistant PVC/NBR

Reinforcement:

Synthetic textile

Safety factor:

5:1

Temperature:

-30°C – +70°C

Design:

Lay-flat, smooth, black

Applications/Characteristics Air pressure hose designed for construction sites where low weight is appreciated. The hose sustains a lot of external abrasion and can be stored laying flat. Can be delivered in lengths of up to 200 meters. Product group: Part number 1425-00-12 1425-00-16 1425-00-24 1425-00-32 1425-00-40 1425-00-48 1425-00-64

142 ID mm

OD mm

20.0 25.0 38.0 51.0 65.0 76.0 102.0

25.0 31.0 43.0 57.0 75.0 88.0 117.0

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

2.0 2.0 1.2 1.2 1.2 1.2 1.2

0.17 0.24 0.39 0.56 0.70 0.90 1.05

60 60 60 60 60 60 60

1424-00-1690 FLATAIR, AIR PRESSURE HOSE, LAY-FLAT, 20 BAR Construction Inner tube:

Abrasion and oil resistant PVC/NBR

Cover:

Abrasion and oil resistant PVC/NBR

Reinforcement:

Synthetic textile

Safety factor:

5:1

Temperature:

-30°C – +70°C

Design:

Lay-flat, smooth, yellow

Applications/Characteristics Air pressure hose designed for construction sites where low weight is appreciated. The hose sustains a lot of external abrasion and can be stored laying flat. Can be delivered in lengths of up to 200 meters. Product group:

Part number 1425-00-1690

50

142

ID mm

OD mm

25.0

31.0

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

2.0

0.24

60

PRODUCT CATALOGUE 2009


1425-70 MANTEX HP, AIR PRESSURE HOSE, LAY-FLAT

1:4

Construction Inner tube:

Abrasion and oil resistant PU

Cover:

Abrasion and oil resistant PU

Reinforcement:

Synthetic textile

Safety factor:

5:1

Temperature:

-30°C – +70°C

Design:

Lay-flat, smooth, orange

Applications/Characteristics Air pressure hose designed for construction sites (well drilling) where low weight is appreciated. Due to the PU-design, the hose sustains an extreme amount of external abrasion and can be stored laying flat. Can be delivered in lengths of up to 200 meters. Product group:

Part number 1425-70-32 1425-72-32 1425-74-32

142

ID mm

OD mm

51.0 51.0 51.0

57.0 57.0 57.0

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

3.0 3.0 3.0

0.70 0.70 0.70

20 40

1425-10 ARMTEX, FIRE HOSE Construction Inner tube:

Red nitrile/PVC

Cover:

Red nitrile/PVC

Reinforcement:

Textile

Safety factor:

3:1

Temperature:

-30°C – +70°C

Design:

Smooth, red

Applications/Characteristics Fire hose manufactured according to NS 4016-4018/SS 2840/DIN 1411/NEN 2242 and BS 6391 type 3. Can be delivered in lengths of up to 200 meters. Product group:

Part number 1425-10-16 1425-10-24 1425-10-32 1425-10-40 1425-10-48 1425-10-64

PRODUCT CATALOGUE 2009

142

ID mm

Burst pr. MPa

25.0 38.0 51.0 65.0 76.0 102.0

10.0 5.5 4.5 4.5 4.0 3.5

Weight kg/m 0.275 15; 0.300 15; 0.380 15; 0.530 15; 0.700 15; 1.050 15;

Length m/coil 20; 20; 20; 20; 20; 20;

25; 25; 25; 25; 25; 25;

and and and and and and

30 30 30 30 30 30

51


1425-30 GETEX, FIRE HOSE Construction Inner tube:

EPDM

Cover:

White polyester weave

Reinforcement:

Textile

Safety factor:

3:1

Temperature:

-50°C – +90°C

Design:

Smooth, white

Applications/Characteristics Low weight fire hose used by Scandinavian fire departments. Can be delivered in lengths of up to 1,000 meters/coil. Product group: Part number 1425-30-16 1425-30-24 1425-30-32 1425-30-40 1425-30-48 1425-30-64

1426

142 ID mm

Work pr. MPa

Weight kg/m

25.0 38.0 51.0 65.0 76.0 102.0

1.5 1.5 1.5 1.5 1.5 1.2

0.120 0.180 0.270 0.320 0.400 1.650

Length m/coil 15; 15; 15; 15; 15; 15;

20; 20; 20; 20; 20; 20;

25 25 25 25 25 25

and and and and and and

30 30 30 30 30 30

AIRBRAKE SAE J1402-A, BRAKE HOSE Construction Inner tube:

NBR/SBR

Cover:

CR

Reinforcement:

Textile

Safety factor:

6.21:1

Temperature:

-40°C – +93°C

Design:

Smooth, black

Applications/Characteristics Brake hose for vehicles and pneumatic systems. Manufactured according to SAE J14002-A. Product group:

Part number 1426-00-09 1426-00-12 1426-00-14

52

142

ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

9.5 12.7 14.5

19.0 22.2 24.5

1.0 1.0 1.0

89 102 114

0.30 0.37 0.43

40 40 40

PRODUCT CATALOGUE 2009


1426-10 AIRBRAKE DIN 74310, BRAKE HOSE

1:4

Construction Inner tube:

EPDM

Cover:

EPDM

Reinforcement:

Synthetic textile

Safety factor:

2.5:1

Temperature:

-40°C – +70°C

Design:

Smooth, black

Applications/Characteristics Brake hose for vehicles and pneumatic systems. Manufactured according to DIN 74310. Product group:

Part number 1426-10-11 1426-10-13

1429

142

ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

11.0 13.0

18.0 25.0

1.0 1.0

70 100

0.22 0.49

40 40

PVC HOSE, TRANSPARENT Construction Inner tube: Cover: Reinforcement: Safety factor: Temperature: Design:

PVC PVC None 3:1 -10°C – +60°C Smooth, transparent, 75° shore

Applications/Characteristics A PVC hose with no reinforcement designed for transportation of water and air. Other dimensions are available on request. Product group: Part number 1429-02-04 1429-03-05 1429-04-06 1429-04-07 1429-05-08 1429-05-09 1429-06-09 1429-08-11 1429-08-12 1429-09-12 1429-09-14 1429-11-15 1429-12-15 1429-12-17 1429-19-23

PRODUCT CATALOGUE 2009

141 ID mm 2.0 3.0 4.0 4.0 5.0 5.0 6.0 8.0 8.0 9.0 9.0 11.0 12.0 12.0 19.0

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

4.0 5.0 6.0 7.0 8.0 9.0 9.0 11.0 12.0 12.0 14.0 15.0 15.0 17.0 23.0

100 50 100 50 50 50 50 50 50 50 50 50 50 50 50

53


1430

HYDROIL, OIL PRESSURE HOSE, 10 BAR Construction Inner tube:

NBR

Cover:

NBR

Reinforcement:

Synthetic textile

Safety factor:

3:1

Temperature:

-20°C – +80°C

Design:

Smooth, black

Applications/Characteristics Return hose for hydraulic systems, farm tanks, diesel, mineral oils, gasoline and unleaded gasoline. Also suitable for water, lubricants etc. This hose has an antistatic synthetic rubber cover. For larger dimensions, see 1435. Product group: Part number 1430-00-03 1430-00-04 1430-00-05 1430-00-06 1430-00-08 1430-00-10 1430-00-12 1430-00-16

143 ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

5.0 6.0 8.0 10.0 13.0 16.0 19.0 25.0

11.5 13.0 15.0 17.0 20.5 24.0 27.0 35.0

1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0

30 35 40 45 50 60 65 80

0.11 0.14 0.17 0.20 0.26 0.32 0.40 0.62

100 40 40 40 40 40 40 40

1432-50 MULTIOIL, OIL PRESSURE HOSE, 20 BAR Construction Inner tube:

Nitrile (NBR) Electric resistance

Cover:

NBR/EPDM

Reinforcement:

Synthetic textile

Safety factor:

4:1

Temperature:

-30°C – +100°C

Design:

Smooth, black

Applications/Characteristics A very good all-round hose for many applications, such as return hose for hydraulic systems, diesel, gasoline, unleaded gasoline, RME (Rape-Methyl-Ester) and E85 fuel with max 30% mixture etc. The cover is resistant to external oil, abrasion, weather and heat. Electric resistance 106 Ohm. Product group: Part number 1432-50-04 1432-50-05 1432-50-06 1432-50-08 1432-50-10 1432-50-12 1432-50-16

54

143 ID mm

ID inch

6.0 8.0 10.0 13.0 16.0 19.0 25.0

1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1"

OD Work pr. mm MPa 13.0 15.0 17.0 21.0 24.5 28.0 35.0

2.0 2.0 2.0 2.0 2.0 2.0 2.0

Bend rad. mm

Weight kg/m

Length m/coil

30 34 38 45 53 58 77

0.14 0.17 0.19 0.28 0.35 0.43 0.62

40 40 40 40 40 40 40

PRODUCT CATALOGUE 2009


1432-10 AUTOOIL, FUEL HOSE

1:4

Construction Inner tube:

Nitrile (NBR)

Cover:

Oil and gasoline resistant rubber

Reinforcement:

Synthetic textile

Safety factor:

3:1

Temperature:

-30°C – +100°C

Design:

Smooth, black (S) / Green textile coated cover

Applications/Characteristics This hose is resistant to leaded and unleaded gasoline and diesel. It is suitable for engine aggregates. The hose is delivered on bobbins. Hose stands can be ordered with part number 1432-10-00K (except for 1432-10-06S). Product group:

Part number 1432-10-02 1432-10-02S 1432-10-03S 1432-10-04S 1432-10-05 1432-10-05S 1432-10-06S

143

ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/bobbin

3.0 4.0 5.0 6.0 7.5 7.5 10.0

7.0 9.0 10.0 13.0 14.5 14.5 16.0

1.0 1.0 1.0 1.0 1.0 1.0 1.0

27 30 40 55 63 65 75

0.06 0.07 0.08 0.14 0.14 0.15 0.16

15 15 15 15 15 15 10

1432-30 YACHTOIL SW, MARINE FUEL HOSE, ISO 7840 Construction Inner tube: Cover: Reinforcement: Safety factor: Temperature: Design:

Nitrile (NBR) Oil, fire and weather resistant rubber (CR) Synthetic textile See table below -20°C – +80°C Smooth, black

Certificate

Certificate

Applications/Characteristics A very flexible fuel hose that is resistant to gasoline, unleaded gasoline and diesel. The hose is manufactured according to SS-EN ISO 7840 A1 regarding flame resistance and permeability. This means that it can sustain 2.5 minutes in open fire without leaking. For larger dimensions, see 1432-31. Approved by the Bureau Veritas. Product group: Part number 1432-30-02 1432-30-03 1432-30-04 1432-30-05 1432-30-06 1432-30-08 1432-30-10 1432-30-12 1432-30-16

PRODUCT CATALOGUE 2009

143 ID mm 4.0 5.0 6.0 8.0 10.0 12.5 16.0 19.0 25.0

OD Work pr. Burst pr. mm MPa MPa 14.0 15.0 16.0 18.0 20.0 22.0 26.0 29.0 35.0

1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0

3.4 3.4 3.4 3.4 3.4 2.5 2.5 2.5 2.5

Bend rad. mm

Weight kg/m

Length m/coil

25 30 35 50 60 75 100 115 150

0.19 0.20 0.24 0.28 0.28 0.35 0.46 0.53 0.66

100 100 100 100 100 100 80 80 50

55


1432-31 YACHTOIL SW, MARINE FUEL HOSE, ISO 7840 Construction Inner tube:

Nitrile (NBR)

Cover:

Oil, fire and weather resistant rubber (CR)

Reinforcement:

Synthetic textile

Safety factor:

8:1

Temperature:

-20°C – +80°C

Design:

Wrapped, black

Certificate

Certificate

Applications/Characteristics This hose is manufactured according to SS-EN ISO 7840 A1 regarding flame resistance and permeability. This means that it can sustain 2.5 minutes in open fire without leaking. It is used as a fuel refill hose on smaller boats. Approved by the Bureau Veritas. Product group: Part number 1432-31-20 1432-31-24 1432-31-32 1432-31-38 1432-31-40 1432-31-48

1433

143 ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/bobbin

32.0 38.0 50.0 55.0 63.0 76.0

44.0 50.0 62.0 67.0 76.0 88.0

0.25 0.25 0.25 0.25 0.25 0.25

320 380 500 550 635 760

0.99 1.14 1.44 1.57 1.86 2.10

40 40 40 40 40 20

OIL SUCTION HOSE, PVC Construction Inner tube:

Oil resistant PVC

Cover:

Oil resistant PVC

Reinforcement:

Embedded spiral

Safety factor:

3:1

Temperature:

-25°C – +55°C

Design:

Lightly corrugated, blue

Applications/Characteristics This hose is suitable for suction and pressure applications for paraffin, lubricating oil and mineral based hydraulic oils. It is flexible and easy to handle. Product group: Part number 1433-00-12 1433-00-16 1433-00-20 1433-00-24 1433-00-32 1433-00-40 1433-00-48 1433-00-64

56

143 ID mm

OD mm

19.0 25.0 32.0 38.0 51.0 63.0 76.0 102.0

24.0 31.0 41.0 47.0 61.0 75.0 88.0 116.0

Work pr. Bend rad. MPa mm 0.60 0.60 0.50 0.50 0.45 0.40 0.35 0.25

90 90 110 130 175 220 270 360

Weight Vaccum pr. kg/m Max % 0.45 0.50 0.60 0.70 1.05 1.39 1.70 2.70

70 70 70 70 70 70 70 70

Length m/coil 50 30 30 30 50 30 50 30

PRODUCT CATALOGUE 2009


1434

EXMARIN, EXHAUST GAS / MARINE REFILL HOSE

1:4

Construction Inner tube:

Oil resistant synthetic rubber (NBR)

Cover:

Oil resistant synthetic rubber (NBR/SBR)

Reinforcement:

Synthetic textile with a steel spiral

Safety factor:

3:1

Temperature:

-30°C – +100°C

Design:

Wrapped, black

Certificate

Certificate

Applications/Characteristics The hose is suitable for exhaust gas and refill for boats. It fulfils the requirements of Nordic Boat Standard and the Norsk Veritas according to 94/25EC and ISO 7840A1. This means that it can sustain 2.5 minutes in open fire without leaking. It is also CE branded. Product group: Part number 1434-00-16 1434-00-20 1434-00-24 1434-00-25 1434-00-30 1434-00-32 1434-00-38 1434-00-40 1434-00-48 1434-00-56 1434-00-64 1434-00-80 1434-02-03

143 ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

25.0 32.0 38.0 40.0 45.0 50.0 55.0 63.5 76.0 90.0 102.0 125.0 203.0

35.0 42.0 48.0 50.0 55.0 60.0 65.0 73.5 86.0 100.0 112.0 141.0 224.0

0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.6 0.5

150 190 230 240 270 300 330 380 460 540 610 880 1,400

0.78 0.94 1.09 1.14 1.27 1.41 1.53 1.86 2.25 2.67 3.02 6.10 9.50

40 40 40 40 40 40 40 40 20 20 20 40 12

1434-10 EXLIGHT, LOW WEIGHT EXHAUST GAS HOSE Construction Inner tube:

Heat resistant rubber

Reinforcement:

Embedded abrasion resistant spiral of polyamide

Temperature:

-40°C – +170°C

Design:

Outer spiral, black

Applications/Characteristics This hose is suitable for suction of exhausts from motor vehicles. Beneficial to use on hose reels in garages. It can resist deformation, i.e. it is possible to run it over. The hose is also suitable as a exhaust hose for welding gases. Low weight and extremely flexible. Upon request, it can be delivered with end sleeves and/or flame resistant design. Product group: Part number 1434-10-24 1434-10-32 1434-10-48 1434-10-64 1434-10-80 1434-10-96

PRODUCT CATALOGUE 2009

148 ID mm

OD mm

Bend rad. mm

Weight kg/m

Length m/coil

38.0 50.0 75.0 102.0 127.0 150.0

42.0 53.0 77.0 104.0 131.0 153.0

60 65 95 110 130 140

0.57 0.61 0.70 0.94 1.30 1.45

20 20 20 20 20 20

57


1435

TANKOIL SW, GAS TRUCK HOSE, 10/20 BAR Construction Inner tube:

NBR

Cover:

NBR/SBR

Reinforcement:

Synthetic textile

Safety factor:

3:1

Temperature:

-35°C – +80°C

Design:

Wrapped, black

Applications/Characteristics The hose is designed to be used for transportation of petroleum products with no more than 50% aromatic contents. Good to use on gas trucks, as well as on refineries. Equipped with an antistatic wire. Product group: Part number 1435-00-14 1435-00-16 1435-00-18 1435-00-20 1435-00-24 1435-00-26 1435-00-32 1435-00-40 1435-00-48 1435-00-64

1439

143 ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

22.0 25.0 28.0 32.0 38.0 42.0 50.0 63.5 75.0 100.0

32.0 35.0 38.0 45.0 51.0 56.0 64.0 79.0 91.0 116.0

1.0 1.0 1.0 1.0 1.0 2.0 1.0 1.0 1.0 1.0

165 250 240 320 380 340 500 650 750 820

0.80 0.61 0.98 1.05 1.21 1.55 1.67 2.17 2.71 2.92

40 40 40 40 40 60 40 40 40 40

TANKOIL HW, TRUCK HOSE WITH SPIRAL, 10 BAR Construction Inner tube:

NBR

Cover:

NBR/SBR

Reinforcement:

Synthetic textile with spiral

Safety factor:

4:1

Temperature:

-35°C – +80°C

Design:

Wrapped, black

Applications/Characteristics The hose is designed to be used for suction and pressure lines with petroleum products with no more than 50% aromatic contents, e.g. gas trucks, tank wagons and refineries. The strong design makes it usable in demanding environments and low temperatures. Electric resistance: <106 Ohm. Product group: Part number 1439-00-20 1439-00-24 1439-00-32 1439-00-40 1439-00-48 1439-00-64

58

143 ID mm

OD mm

32.0 38.0 50.0 63.0 75.0 100.0

44.0 50.0 65.0 79.0 91.0 116.0

Work pr. Bend rad. MPa mm 1.0 1.0 1.0 1.0 1.0 1.0

190 230 300 380 450 600

Weight Vaccum pr. kg/m Max % 1.13 1.31 2.07 2.71 3.26 4.76

80 80 80 80 80 80

Length m/coil 40 40 40 40 40 40

PRODUCT CATALOGUE 2009


1469-20 GAS TRUCK HOSE EN12115, 16 BAR S&T

1:4

Construction Inner tube:

NBR

Cover:

Oil, weather and abrasion resistant CR

Reinforcement:

Textile and steel spiral

Safety factor:

4:1

Temperature:

-30°C – +80°C

Design:

Wrapped, black

Applications/Characteristics Gas truck hose fulfilling the requirements according to EN12115. The hose is designed to be used with petroleum products with no more than 55% aromatic contents. Designed with textile reinforcement with a twin spiral and two antistatic wires. Electric resistance: <106 Ohm. Vaccum = 90%. Product group: Part number 1469-20-16 1469-20-20 1469-20-24 1469-20-32

1550

143 ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

25.0 32.0 38.0 51.0

37.0 44.0 51.0 65.0

1.6 1.6 1.6 1.6

150 200 230 300

0.80 0.98 1.14 1.69

40.0 40.0 40.0 40.0

ASPHALT, TAR AND MINERAL SUCTION HOSE, 15 BAR Construction Inner tube:

Oil resistant rubber (NBR)

Cover:

Abrasion, ozone and oil resistant rubber (NBR), pin-pricked

Reinforcement:

Braided textile reinforcement with steel spiral

Safety factor:

4:1

Temperature:

-40°C – +200°C

Design:

Wrapped, black

Applications/Characteristics A venerable asphalt hose for hot asphalt and tar. It is also suitable for transportation of mineral oil products (max +80°C). Product group: Part number 1550-00-32 1550-00-40 1550-00-48 1550-00-64

PRODUCT CATALOGUE 2009

143 ID mm

OD mm

50.0 63.0 75.0 100.0

64.0 77.0 90.0 116.0

Work pr. Bend rad. MPa mm 1.5 1.5 1.5 1.5

200 250 300 400

Weight Vaccum pr. kg/m Max % 1.95 2.40 2.95 4.47

90 90 90 90

Length m/coil 40 40 40 40

59


1436

COOLOIL, OIL COOLING HOSE Construction Inner tube:

Nitrile (NBR)

Cover:

Chloroten (CM)

Reinforcement:

Synthetic textile

Safety factor:

3:1

Temperature:

-40°C – +140°C

Design:

Smooth, black

Applications/Characteristics Oil cooling hose for engines and installations. Suitable for oil and glycol mixtures. For fittings, see chapter 5:0. Product group:

143

Part number NW 1436-00-02 1436-00-04 1436-00-06 1436-00-08 1436-00-10 1436-00-13 1436-00-16 1436-00-20 1436-00-25

2 4 6 8 10 13 16 20 25

ID mm

OD mm

4.0 6.0 8.0 9.5 12.0 15.0 18.0 22.0 25.0

10.0 12.0 14.0 15.5 19.0 23.0 26.0 31.0 34.0

Work pr. Bend rad. MPa mm 7.5 6.5 5.5 5.0 6.0 4.0 3.5 3.3 3.3

30 40 50 60 70 90 110 120 140

Weight kg/m

Length m/coil

0.15 0.20 0.23 0.25 0.33 0.50 0.65 0.71 0.85

20 20 20 20 20 20 20 20 20

1436-50 MATHILDA P.T.F.E. ISO 7840A1 Construction Inner tube:

Smooth P.T.F.E. (Teflon ®)

Cover:

CSM

Reinforcement:

One braid of stainless steel wire

Safety factor:

4:1

Temperature:

-60°C – +250°C (Cover: -40°C – +150°C)

Design:

Wrapped, black

Certificate

MED

Applications/Characteristics A hose for demanding environments where high temperature, high pressure, chemical resistance and elastic characteristics are required. Excellent for e.g. paint, fuels, hydraulic oils and food. Age resistant. The inner tube is not an active conductor. Stainless reinforcement according to AISI 304. Fulfils the requirements of ISO 7840A1. Ferrule:

4200-15-xx

Product group:

143

Part number 1436-50-04 1436-50-05 1436-50-06 1436-50-08 1436-50-10

60

ID mm

OD mm

Work pr. MPa

Bend rad. mm

6.4 8.0 9.5 12.7 15.6

12.2 13.7 15.5 18.5 22.6

15.0 12.5 10.0 8.2 7.5

38 56 64 89 114

Weight kg/m

Length m/coil

0.17 0.19 0.23 0.33 0.39

PRODUCT CATALOGUE 2009


1437

RAGOIL, FUEL HOSE

1:4

Construction Inner tube:

Oil resistant rubber

Cover:

Oil resistant rubber, one outer braid of steel

Safety factor:

2.5:1

Temperature:

-40°C – +80°C

Design:

Metal reinforcement

Applications/Characteristics The hose is designed for oil and diesel pipes, and also to be used as a lubrication oil hose. It does not sustain unleaded gasoline. For fuel fittings, see chapter 5:0. Product group:

143

Part number NW 1437-00-02 1437-00-03 1437-00-04 1437-00-06 1437-00-08 1437-00-10 1437-00-13 1437-00-16 1437-00-20

1438

2 3 4 6 8 10 13 16 20

ID mm

OD mm

3.5 4.5 5.5 7.5 9.5 11.0 14.0 17.5 20.5

8.5 9.5 10.5 12.5 15.0 17.5 21.5 26.0 32.0

Work pr. Bend rad. MPa mm 3.2 3.0 3.0 2.4 2.0 2.0 1.8 1.4 1.4

25 25 25 30 40 45 50 70 90

Weight kg/m

Length m/coil

0.13 0.15 0.19 0.22 0.25 0.29 0.37 0.48 0.55

20 20 20 20 20 20 20 20 20

R-FOUR, RETURN AND SUCTION HOSE, SAE 100 R4 Construction Inner tube:

Oil resistant synthetic rubber (NBR)

Cover:

Weather and oil resistant rubber (SBR)

Reinforcement:

Two weave inlays and one spiral

Safety factor:

4:1

Temperature:

-40°C – +100°C

Design:

Wrapped, black

Applications/Characteristics Suction and refill hose for hydraulic systems. Also suitable for low pressure hydraulics. The hose fulfils requirements according to SAE 100 R4. Product group: Part number 1438-00-10 1438-00-12 1438-00-14 1438-00-16 1438-00-20 1438-00-24 1438-00-26 1438-00-32 1438-00-39 1438-00-40 1438-00-48 1438-00-64

PRODUCT CATALOGUE 2009

143 ID mm

OD mm

15.0 19.0 22.0 25.0 32.0 38.0 42.0 50.0 60.0 63.0 76.0 102.0

25.0 30.0 32.0 36.0 43.0 50.0 54.0 62.0 74.0 76.0 90.0 116.0

Work pr. Bend rad. MPa mm 2.1 2.1 1.7 1.7 1.4 1.0 0.8 0.7 0.4 0.4 0.4 0.2

75 120 90 152 203 254 275 305 350 355 457 600

Weight Vaccum pr. kg/m Max % 0.50 0.63 0.70 0.79 0.97 1.27 1.40 1.60 2.35 2.41 3.15 4.40

90 90 90 90 90 90 90 90 90 90 90 90

Length m/coil 40 40 40 40 40 40 40 40 40 40 40 40

61


1580

COMP LD Construction The Comp LD hose consists of a number of layers of polypropylene and polyethylene films. Together with a weather and abrasion resistant cover, they are jointed with an external and an internal coil of spring. This construction gives the hose an extraordinary stability and at the same time full flexibility. When the lowest possible weight is needed, the hoses can be fitted with an internal and external spiral made of aluminium. Colour:

Blue

Spirals:

The standard version is equipped with galvanised steel spirals (Z) internally and externally. Also available with aluminium (A) or polypropylene covered steel spirals upon request.

Temperature: -40°C – +80°C

Applications/Characteristics The COMP LD hose is made for transportation of several different medias under pressure as well as suction. This hose is being used in connection with loading and unloading gas trucks and tank waggons on railways, as well as for transportation between different tanks at industries. COMP LD is 100% aromatically resistant. Electric continuity is achieved when the two spirals are put towards the hose’s fittings. In this way, static electricity is avoided. The electric resistance in an assembled hose is less than 10 Ohm, according to BS 5842:1980 § 6.2. Product group: 150

Part number

1581

ID mm

ID inch

WP BP BR Weight ZZ Weight AZ Weight AA MPa MPa mm kg/m kg/m kg/m

Length max

1580-00-24

40.0 1 1/2"

1.0

5.0

85

1.3

1.0

0.6

25 m

1580-00-32

50.0

2"

1.0

5.0 125

2.6

1.5

1.0

25 m

1580-00-40

63.0 2 1/2"

1.0

5.0 150

2.9

2.0

1.3

25 m

1580-00-48

76.0

3"

1.0

5.0 185

3.4

2.6

1.6

25 m

1580-00-51

80.0

3"

1.0

5.0 185

3.5

2.7

1.7

25 m

1580-00-64

100.0

4"

1.0

5.0 275

4.6

3.5

2.3

25 m

COMP OIL 800 Construction COMP OIL 800 is made of polypropylene with a weather proof and abrasion resistant Polyester/Polyvinyl chloride cover. COMP OIL 800 has, in order to attain a better flexibility and a longer life-span, a layer of polyiethylene, which also makes it gas-tight. Colour:

Dark blue

Spirals:

The standard version has galvanised steel spirals internally and externally (ZZ). Stainless steel spirals are available upon request.

Temperature: -40°C – +100°C

Applications/Characteristics The COMP OIL 800 hose is made for transportation of a number of different petroleum products under pressure as well as suction. This hose is used in connection with loading and unloading gas trucks and tank wagons on railways as well as for transportation between different tanks at industries. Especially made for distributing oils, gasoline, diesel, lubrication oils and paraffine. The COMP OIL 800 hose is 100% aromatically resistant. Electric continuity is attained when the two spirals are put towards the hose’s fittings. In this way, static electricity is avoided. The electrical resistance in an assembled hose is less than 10 Ohm, according to BS 5842:1980 § 6.2. On request, a special flame resistant version can also be delivered. Product group: 150

Part number 1581-00-12 1581-00-16 1581-00-20 1581-00-24 1581-00-32 1581-00-40 1581-00-48 1581-00-64

62

ID mm

ID inch

Work pr. MPa

20.0 25.0 32.0 40.0 50.0 63.0 76.0 100.0

3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"

1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5

Burst pr. Bend rad. MPa mm 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5

50 75 80 85 125 150 185 275

Weight kg/m 0.7 0.9 1.0 1.2 1.8 2.5 3.0 4.3

Length max 25 25 25 25 25 25 25 25

m m m m m m m m

PRODUCT CATALOGUE 2009


1582

COMP CHEM 700

1:4

Construction COMP CHEM 700 is made of polypropylene and polyester with a special weather and abrasion resistant outer cover of polyester/PVC. All layers are jointed between inner and outer spirals. This construction makes the hose meet the demands that the chemical industry have, as well as gas truck applications. Colour:

Green

Spirals:

The standard has an internal polypropylene steel spiral and a galvanised outer spiral.

Temperature: -40°C – +100°C

Applications/Characteristics This hose is suitable as a chemical hose with a wide resistance range. Can be used both as suction and pressure hose. Applications for the hose is loading and unloading of gas trucks and railroad cars, and also within industries in different processes. COMP CHEM 700 is 100% aromatically resistant. Electric continuity is attained when the two spirals are put towards the hose’s fittings. In this way, static electricity is avoided. The electrical resistance in an assembled hose is less than 10 Ohm, according to BS 5842:1980 § 6.2. On request, a special flame resistant version can also be delivered. Product group: 150 Part number 1582-20-12 1582-20-16 1582-20-20 1582-20-24 1582-20-32 1582-20-40 1582-20-48 1582-20-64

1583

ID mm

ID inch

Work pr. MPa

20.0 25.0 32.0 40.0 50.0 63.0 76.0 100.0

3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"

1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5

Burst pr. Bend rad. MPa mm 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5

50 75 80 85 125 150 185 275

Weight kg/m 0.7 0.9 1.0 1.2 1.8 2.5 3.0 4.3

Length max 25 25 25 25 25 25 25 25

m m m m m m m m

COMP TEMP 305 Construction COMP HITEMP 305 is built around a number of layers of P.T.F.E, strengthened with films especially made for high temperature applications. With an inner spiral with AISI 316 L stainless steel and with a weather and abrasion proof outer cover of silicone, COMP HITEMP 305 has superior temperature and abrasion characteristics. Colour:

Black

Spirals:

AISI 316 L stainless inner spiral. Outer spiral of galvanised steel.

Temperature: -40°C – +200°C

Applications/Characteristics A hose that is made especially for transportation of hot oil and bitumen under suction or pressure. COMP HITEMP 305 is suitable when loading and unloading gas trucks, but also for fixed industrial applications. The P.T.F.E. inner tube makes the hose sleek internally with low friction as a result. All hoses are 100 % aromatically resistant, anti-static and can be used both for suction and pressure applications. Product group: 150

Part number 1583-10-12 1583-10-16 1583-10-20 1583-10-24 1583-10-32 1583-10-40 1583-10-48 1583-10-64

PRODUCT CATALOGUE 2009

ID mm

ID inch

Work pr. MPa

20.0 25.0 32.0 40.0 50.0 63.0 76.0 100.0

3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"

1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5

Burst pr. Bend rad. MPa mm 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5

70 90 100 110 150 180 220 300

Weight kg/m 0.7 0.8 1.0 1.1 1.5 1.9 2.4 3.4

Length max 25 25 25 25 25 25 25 25

m m m m m m m m

63


1584

COMP P.T.F.E 300 Construction COMP P.T.F.E. 300 is built around a number of layers of P.T.F.E with inner and outer spirals of stainless steel. The outer tube is made of a weather and abrasion resistant polyester/polyvinyl chloride. The hose has a good weather and ozone survivability. COMP P.T.F.E. 300 is an excellent hose that can be used as an allround hose with a smaller number of hoses and a longer life span. Colour:

Red

Spirals:

Stainless inner and outer spirals.

Temperature: -40°C – +100°C

Applications/Characteristics Especially made for use as a universal hose for transportation of a wide spectra of aggressive medias. The hose is suitable when loading and unloading gas trucks and railroad cars as well as within the industry in different processes. Electric continuity is attained when the two spirals are put towards the hose’s fittings. In this way, static electricity is avoided. The electric resistance in an assembled hose is smaller than 10 Ohm, according to BS 5842:1980 § 6.2. On request, a special flame resistant version can also be delivered. Product group: 150 Part number 1584-11-12 1584-11-16 1584-11-20 1584-11-24 1584-11-32 1584-11-40 1584-11-48 1584-11-64

1585

ID mm

ID inch

Work pr. MPa

20.0 25.0 32.0 40.0 50.0 63.0 76.0 100.0

3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"

1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5

Burst pr. Bend rad. MPa mm 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5

65 80 90 100 140 165 215 290

Weight kg/m 0.8 1.0 1.1 1.3 1.9 2.6 3.2 4.6

Length max 25 25 25 25 25 25 25 25

m m m m m m m m

COMP CHEM LD GAS RETURN Construction The COMP LD hose consists of a number of layers polypropylene and polythylene films. Together with a weather and abrasion resistant outer cover, they are jointed with an external and an internal coil of spring. This construction gives the hose an exceptional stability and at the same time maximum flexibility. When the lowest possible weight is needed, the hoses can be equipped with spirals of aluminium. Colour:

Orange

Spirals:

The standard version has galvanised steel spirals (Z) internally and externally. Also available with spirals of aluminium (A) or polypropylene coated steel spirals, on request.

Temperature: -40°C – +100°C

Applications/Characteristics A special hose for gas recycling on gas trucks and related industries. The COMP LD hose is 100% aromatically resistant. Electric continuity is attained when the two spirals are put towards the hose’s fittings. In this way, static electricity is avoided. The electric resistance in an assembled hose is less than 10 Ohm, according to BS 5842:1980 § 6.2. Product group: 150

Part number

64

ID mm

ID inch

WP BP BR Weight ZZ Weight AZ Weight AA MPa MPa mm kg/m kg/m kg/m

Length max

1585-00-48

76.0

3"

1.0

5.0 185

3.4

2.6

1.6

25 m

1585-00-64

100.0

4"

1.0

5.0 275

4.6

3.5

2.3

25 m

PRODUCT CATALOGUE 2009


1440

WELDARC, WELDING HOSE EN 559, 20 BAR

1:4

Construction Inner tube:

Synthetic rubber (SBR)

Cover:

Synthetic rubber (SBR/EPDM)

Reinforcement:

Polyester

Safety factor:

3:1

Temperature:

-25°C – +100°C

Design:

Ribbed, red or blue

Applications/Characteristics This welding hose is suitable for all types of aggregates, high ignition temperature and low diffusion. According to the latest European Norm EN 559. Product group:

Part number 1440-01-03 1440-02-03 1440-01-04 1440 -02-04 1440-01-05 1440-02-05 1440-01-06 1440-02-06

1441

144

ID mm

OD mm

5.0 5.0 6.3 6.3 8.0 8.0 10.0 10.0

12.0 12.0 13.3 13.3 15.0 15.0 17.0 17.0

Work pr. Bend rad. MPa mm 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0

Weight Length kg/m Colour m/coil

40 40 40 40 40 40 50 50

0.13 0.13 0.15 0.15 0.17 0.17 0.20 0.20

Red Blue Red Blue Red Blue Red Blue

80 80 80 80 80 80 80 80

TWINARC, TWIN WELDING HOSE EN 559, 20 BAR Construction Inner tube:

Synthetic rubber (SBR)

Cover:

Synthetic rubber (SBR/EPDM)

Reinforcement:

Polyester

Safety factor:

3:1

Temperature:

-25°C – +100°C

Design:

Smooth, red and blue

Applications/Characteristics Twin welding hose for engineering and construction industries. The hose is also flexible in low temperatures. According to the latest European Norm EN 559. Product group:

Part number 1441-00-03 1441-00-04 1441-00-05 1441-00-06

PRODUCT CATALOGUE 2009

144

ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

5.0 6.3 8.0 9.0

12.0 13.3 15.0 16.0

2.0 2.0 2.0 2.0

45 60 75 90

0.25 0.29 0.34 0.38

100 100 100 100

65


1442

HEATSEAKER, LIQUIFIED PETROLEUM GAS HOSE, EN 559, 20 BAR Construction Inner tube:

Synthetic rubber (NBR)

Cover:

Synthetic rubber

Reinforcement:

Synthetic textile

Safety factor:

3:1

Temperature:

-30°C – +80°C

Design:

Smooth, orange

Applications/Characteristics Flexible rubber hose for transportation of liquified petroleum gas (LPG). Suitable for LPG kitchens, burners, soldering, melting. The hose is cold resistant in order to function outdoors. According to the latest European Norm EN 559. Product group:

Part number 1442-00-05 1442-00-06

144

ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

8.0 10.0

14.0 17.0

2.0 2.0

65 75

0.15 0.22

40 40

Weight kg/m

Length m/coil

1442-10 LIQUIFIED PETROLEUM GAS HOSE, R1AT Construction Inner tube:

Oil resistant rubber (NBR)

Cover:

Synthetic rubber, pin-pricked

Reinforcement:

One braid of steel wire

Temperature:

-40°C – +100°C

Design:

Wrapped, orange

Applications/Characteristics High pressure hose suitable for liquified petroleum gas (LPG), especially on construction sites. Product group:

Part number 1442-10-06 1442-10-08 1442-10-12 1442-10-16

66

144

ID mm

OD mm

Work pr. MPa

Bend rad. mm

9.5 13.0 19.0 25.0

18.0 21.5 28.5 36.6

3.0 3.0 3.0 3.0

110 160 240 300

0.36 0.45 0.76 1.08

PRODUCT CATALOGUE 2009


1443

TWIN HOSE, LIQUIFIED PETROLEUM GAS, EN 559

1:4

Construction Inner tube:

Synthetic rubber (SBR)

Cover:

Synthetic rubber (SBR/EPDM)

Reinforcement:

Synthetic textile

Safety factor:

3:1

Temperature:

-25°C – +100°C

Design:

Smooth, orange and blue

Applications/Characteristics Twin hose for liquified petroleum gas (LPG) and oxygen. According to the latest European Norm EN 559. Product group:

Part number 1443-00-04 1443-00-06

144

ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

6.3 10.0

13.3 17.0

2.0 2.0

60 90

0.29 0.38

100 100

1445-10 COLDSEEKER, AC HOSE Construction Inner tube:

Nitrile (NBR)

Cover:

CSM-EPDM

Reinforcement:

Textile and a barrier of nylon

Safety factor:

3.4:1

Temperature:

-35°C – +120°C, temporarily up to +140°C

Design:

Wrapped, black

Applications/Characteristics An excellent hose for cold media. It is resistant towards e.g. freon R134A. A low weight and, due to the nylon barrier, it is a flexible hose with excellent permeability characteristics. The inner tube of nitrile makes it extra tight between fitting and hose. It fulfils the requirements of SAE J51B, A2. For fittings AC, see chapter 5:0. Product group: Part number 1445-10-05 1445-10-06 1445-10-08 1445-10-10

PRODUCT CATALOGUE 2009

144 ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Length m/coil

8.0 10.0 13.0 16.0

5/16" 13/32" 1/2" 5/8"

18.5 22.4 24.6 28.1

3.5 3.5 3.5 3.5

70 80 90 105

0.27 0.29 0.44 0.69

67


1447

NON-FREEZING MEDIA HOSE 9038 Construction Inner tube:

Polyamide (PA)

Cover:

Oil, weather and abrasion resistant polyurethane (PU)

Reinforcement:

Two braids of polyester

Safety factor:

4:1

Temperature:

-40°C – +100°C, temporarily up to +120°C

Design:

Smooth, pin-pricked, black

Applications/Characteristics A hose that is suitable for freezing media. It is resistant towards freon R134A, and it fulfils the following international standards: SAE 100 R-7, BS4983: 1973, DIN24951-2 and ISO 3945. Ferrule:

3000-15-06, 3000-10-08

Product group:

144

Part number 1447-00-06 1447-00-08

1448

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Length m/coil

9.9 13.2

3/8" 1/2"

16.1 19.3

15.5 14.0

112 150

0.15 0.18

RAINBOW, CARBON DIOXIDE HOSE Construction Inner tube:

Food resistant polyester elastomer (PEL)

Cover:

Oil, weather and abrasion resistant polyurethane (PU)

Reinforcement:

One braid of polyaramide

Safety factor:

4:1

Temperature:

-40°C – +100°C, max +70°C for water based liquids

Design:

Smooth, pin-pricked cover, black

Applications/Characteristics A flexible and light thermoplastic hose for carbon dioxide, nitrogen and mixed gases in the beverage industry. Superb length stability, max 2%. The hose is durable and flexible in the whole temperature range. Food quality. Special fittings available on request. Product group:

Part number 1448-00-04

68

144

ID mm

ID inch

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

6.5

1/4"

11.7

34.5

51

0.11

PRODUCT CATALOGUE 2009


1450 BUSHMASTER, CHEMICAL HOSE, XLPE, 10 BAR

1:4

Construction Inner tube:

XLPE

Cover:

EPDM

Reinforcement:

Synthetic textile with a steel spiral

Safety factor:

4:1

Temperature:

-35°C – +100°C

Design:

Wrapped, green

Applications/Characteristics Flexible hose for suction and pressure applications. The hose is suitable for transportation of chemicals within the petrochemical industry. It is resistant to 90% of all industrial chemicals. Product group: Part number 1450-00-12 1450-00-16 1450-00-20 1450-00-24 1450-00-32 1450-00-40 1450-00-48 1450-00-64

145 ID mm

OD mm

19.0 25.0 32.0 38.0 51.0 63.5 76.0 102.0

33.0 38.0 46.0 52.0 68.0 80.0 94.0 121.0

Work pr. Bend rad. MPa mm 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0

160 200 260 300 400 510 610 820

Weight Vaccum pr. kg/m Max % 0.82 0.94 1.26 1.45 2.28 2.83 3.61 5.00

80 80 80 80 80 80 80 80

Length m/coil 40 40 40 40 40 40 20 20

1450-10 COBRA, CHEMICAL HOSE, EPDM, EN 12115 Construction Inner tube:

EPM

Cover:

EPDM

Reinforcement:

Synthetic textile with a steel spiral

Safety factor:

4:1

Temperature:

-35°C – +100°C

Design:

Wrapped, black

Applications/Characteristics Suction and pressure hose for aggressive chemicals. used for loading and unloading of gas trucks, railroad cars, cargo liners and in stationary installations in chemical premises. The hose is flexible and resists external abrasion well. Electrical resistance < 106 Ohm. According to EN 12115. Product group:

Part number 1450-10-32 1450-10-48 1450-10-64

PRODUCT CATALOGUE 2009

145

ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

50.0 75.0 100.0

64.0 90.0 116.0

1.6 1.0 1.0

275 350 500

1.84 3.12 4.41

40 40 40

69


1450-30 VIPER, CHEMICAL HOSE, UPE, EN 121115 / GAS TRUCK Construction Inner tube:

UPE

Cover:

EPDM

Reinforcement:

Synthetic textile with a steel spiral

Safety factor:

4:1

Temperature:

-35°C – +100°C

Design:

Wrapped, black

Applications/Characteristics Suction and pressure hose for aggressive chemicals. Excellent for installations on gas trucks, tank wagons and stationary installations within the chemical industry. Vaccum pressure is max 80%. Product group: Part number 1450-30-12 1450-30-16 1450-30-20 1450-30-24 1450-30-32 1450-30-40 1450-30-48 1450-30-64

1456

145 ID mm

OD Work pr. Burst pr. Bend rad. Vacuum pr. Weight Length mm MPa MPa mm max % kg/m m/coil

19.0 31.0 25.0 37.0 32.0 44.0 38.0 51.0 50.0 66.0 63.5 79.0 75.0 91.0 100.0 116.0

1.6 1.6 1.6 1.6 1.6 1.6 1.0 1.0

6.4 6.4 6.4 6.4 6.4 6.4 4.8 4.8

190 230 260 340 410 450 530 680

0.81 0.93 1.20 1.52 2.47 2.73 3.34 4.60

80 80 80 80 80 80 80 80

40 40 40 40 40 40 20 20

YELLOW PYTHON, 30 BAR Construction Inner tube:

Heat resistant rubber (EPDM)

Cover:

Heat and ozone resistant rubber (EPDM)

Reinforcement:

Synthetic textile

Safety factor:

4:1

Temperature:

-40°C – +100°C

Design:

Smooth, yellow. Wrapped from 32 mm.

Applications/Characteristics A very flexile hose with a wide temperature range. Well suited for air and hot and cold water. It is resistant towards lighter chemicals. It has good ozone resistance and will temporarily sustain temperatures up to 130°C Product group: Part number 1456-00-04 1456-00-06 1456-00-08 1456-00-10 1456-00-12 1456-00-16 1456-00-24 1456-00-32

70

145 ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

6.0 10.0 13.0 16.0 19.0 25.0 38.0 50.0

14.0 20.0 23.0 27.0 30.0 37.0 51.0 66.0

3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0

40 60 80 100 110 150 380 500

0.19 0.35 0.41 0.55 0.63 0.88 1.35 1.82

40 40 40 40 40 40 40 40

PRODUCT CATALOGUE 2009


1451-40 SPRAY PAINT HOSE, 20 BAR

1:4

Construction Inner tube:

PA

Cover:

PVC/PU

Reinforcement:

Synthetic textile

Safety factor:

3:1

Temperature:

-20°C – +60°C

Design:

Smooth, red

Applications/Characteristics The hose is suitable as a paint spray hose, with low-weight and excellent flexibility. It is equipped with an antistatic wire and manufactured in a silicone-free process. Product group: Part number 1451-40-04 1451-40-06

1552

145 ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

6.4 9.0

12.8 16.3

2.9 2.9

40 60

0.12 0.17

50 50

LOW-WEIGHT SPIRAL SUCTION HOSE Construction Inner tube:

PVC

Cover:

PVC

Reinforcement:

White PVC spiral

Safety factor:

3:1

Temperature:

-5°C – +60°C

Design:

Corrugated, transparent yellow

Applications/Characteristics A low-weight PVC hose for suction and pressure applications. The hose is also suitable for powder transportation within agriculture, food industry and gardening. Smooth inner tube. Sustains alcohols beneath 28%. Product group: Part number 1552-00-12 1552-00-16 1552-00-20 1552-00-24 1552-00-25 1552-00-32 1552-00-40 1552-00-48 1552-00-64

PRODUCT CATALOGUE 2009

141 ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

20.0 25.0 32.0 38.0 40.0 50.0 63.0 75.0 102.0

26.2 31.6 39.2 45.4 47.6 58.2 70.8 85.0 114.0

0.8 0.8 0.7 0.6 0.6 0.5 0.5 0.4 0.4

75 120 150 170 180 220 290 350 480

0.28 0.33 0.46 0.55 0.61 0.81 1.04 1.38 2.16

50 50 50 50 50 50 50 50 25

71


1552-10 LOW-WEIGHT SPIRAL SUCTION HOSE, PVC, ANTISTATIC Construction Inner tube:

PVC

Cover:

PVC

Reinforcement:

White PVC spiral with antistatic wire

Safety factor:

3:1

Temperature:

-5°C – +60°C

Design:

Corrugated, transparent yellow

Applications/Characteristics A low-weight PVC hose for pressure and suction applications. Due to its antistatic wire and smooth inner tube, this hose is mostly suitable for transportation of powder granualtes. Product group: Part number 1552-10-25 1552-10-32

147 ID mm

OD mm

40.0 50.o

48.0 58.0

Work pr. Bend rad. MPa mm 0.6 0.6

170 220

Weight Vaccum pr. kg/m Max % 0.61 0.81

70 70

Length m/coil 50 50

1452 FOODCLEAN, FOOD FLUSH HOSE Construction Inner tube:

White, food approved synthetic rubber (NBR/IR/CR)

Cover:

Abrasion and weather resistant synthetic rubber (NBR/PVC)

Reinforcement:

Synthetic textile

Safety factor:

3:1

Temperature:

-20°C – +95°C

Design:

Smooth, blue

Applications/Characteristics A hose suitable for hot water cleaning within the food industry. Smooth externally and with a cover that does not stain. The hose is resistant towards animal and vegetable greases. Food proof. Temporarily, the hose can be sterilized with a temperature of max +120°C. Product group: Part number 1452-00-08 1452-00-10 1452-00-12 1452-00-16

72

146 ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

13.0 16.0 19.0 25.0

23.0 26.0 31.0 39.0

1.0 1.0 1.0 1.0

105 130 150 200

0.42 0.49 0.71 1.05

40 40 40 40

PRODUCT CATALOGUE 2009


1452-10 FOODSTEAM, FOOD FLUSH HOSE, STEAM

1:4

Construction Inner tube:

White, food approved rubber (EPDM)

Cover:

Abrasion and weather resistant rubber (EPDM)

Reinforcement:

Synthetic textile

Safety factor:

3:1

Temperature:

-40°C – +95°C for water, +164°C for steam

Design:

Wrapped, blue

Applications/Characteristics Food approved flush hose for hot water and steam within the food industry. The cover is resistant towards animal and vegetable greases. Manufactured in a way that it will not stain. The hose has a good bending radius and endures tough demands. Product group: Part number 1452-10-08 1452-10-10 1452-10-12 1452-10-16

1553

146 ID mm

OD mm

13.0 16.0 19.0 25.0

24.0 27.0 31.0 37.0

WP 95°C WP 164°C Bend rad. MPa MPa mm 2.0 2.0 2.0 2.0

0.6 0.6 0.6 0.6

100 120 160 200

Weight kg/m

Length m/coil

0.34 0.51 0.59 0.89

40 40 40 40

DAIRYMASTER, MILK HOSE, 6 BAR Construction Inner tube:

White, food approved synthetic rubber (NR)

Cover:

Abrasion and weather resistant rubber (NR)

Reinforcement:

Synthetic textile and a spiral

Safety factor:

3:1

Temperature:

-30°C – +80°C

Design:

Wrapped, blue

Applications/Characteristics The hose is especially suited for handling milk during pick-up and transportation, but also for other beverages such as beer, water and alcohol up to 96% concentration. The hose is equivalent to standard/approval CEE-Guide, as well as to FDA, BgVV, IANESCO, VTT and the British Milk Marketing Board. Product group: Part number 1553-00-20 1553-00-24 1553-00-32 1553-00-40 1553-00-48 1553-00-64

PRODUCT CATALOGUE 2009

146 ID mm

OD mm

32.0 38.0 51.0 63.0 76.0 100.0

43.0 49.0 62.5 74.5 89.0 113.5

Work pr. Vacuum pr. Bend rad. MPa Max % mm 0.6 0.6 0.6 0.6 0.6 0.6

90 90 90 90 90 90

64 76 102 126 152 350

Weight kg/m

Length m/coil

0.82 1.13 1.76 2.08 2.94 3.59

40 40 40 40 40 40

73


1553-10 MULTIFOOD, FOOD HOSE, 10 BAR Construction Inner tube:

White, food proof rubber (NBR)

Cover:

Oil and weather resistant rubber (CR)

Reinforcement:

Synthetic textile and a spiral

Safety factor:

3:1

Temperature:

-30°C – +100°C

Design:

Wrapped, blue

Applications/Characteristics Suction and pressure hose for liquified food, especially suited for greases and oils, but also for beverages such as juices, milk and alcohol with up to 70% concentration. The hose is also usable for depletion of powder products from gas trucks and tank waggons. Equivalent to standard/approval CEE-Guide, as well as to BgVV and IANESCO. Product group: Part number 1553-10-20 1553-10-24 1553-10-32 1553-10-40 1553-10-48 1553-10-64

146 ID mm

OD mm

32.0 38.0 50.0 63.0 75.0 100.0

44.0 50.0 62.0 76.0 89.5 115.5

Work pr. Vacuum pr. Bend rad. MPa Max % mm 1.0 1.0 1.0 1.0 1.0 1.0

90 90 90 90 90 90

65 75 125 160 225 500

Weight kg/m

Length m/coil

1.15 1.30 1.85 2.36 3.40 4.49

40 40 40 40 40 40

1553-50 MATERIAL HOSE, PVC Construction Inner tube:

White, super elastic PVC of NM quality

Cover:

Black, super elastic PVC

Reinforcement:

Steel spiral and polyester

Safety factor:

3:1

Temperature:

-25°C – +60°C

Design:

Wrapped, black

Applications/Characteristics A universal suction and pressure application hose for food, drinking water and alcohol up to 28% concentration. The hose is well suited for water facilities, when loading and unloading tanks and containers; and for dry materials. Product group:

Part number 1553-50-48 1553-50-64

146

ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

76.0 102.0

92.0 119.0

12.0 10.0

210.0 300.0

2.90 4.00

30 20

The hose can also be delivered in dimensions 3/4" – 6"

74

PRODUCT CATALOGUE 2009


1454

ONTARIO, STEAM HOSE, 17 BAR

1:4

Construction Inner tube:

Heat resistant rubber (EPDM)

Cover:

Heat and abrasion resistant rubber (EPDM)

Reinforcement:

Two spirals of corrosion proofed steel

Safety factor:

10:1

Temperature:

-40°C – +210°C

Design:

Wrapped, black

Applications/Characteristics Steam hose for high pressures and temperatures. Low-weight and flexible. The hose is suitable for heating and cleaning within the road, petrochemical, paper and pulp industries. The hose can temporarily sustain temperatures up to 232°C. Product group: Part number 1454-00-06 1454-00-08 1454-00-12 1454-00-16 1454-00-20 1454-00-24 1454-00-32

149 ID mm

OD mm

10.0 13.0 19.0 25.0 32.0 38.0 51.0

21.0 25.0 32.0 38.0 46.0 54.0 67.0

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

1.7 1.7 1.7 1.7 1.7 1.7 1.7

0.36 0.49 0.72 0.96 1.28 1.59 2.25

60 60 60 60 60 60 60

1454-10 AMAZONAS, STEAM HOSE Construction Inner tube:

EPDM

Cover:

EPDM

Reinforcement:

Synthetic textile

Safety factor:

10:1

Temperature:

-40°C – +170°C

Design:

Wrapped, red

Applications/Characteristics Steam hose for low pressures. The hose is flexible and kink resistant. The hose suitable for saturated steam up to 170°C and for hot water up to 90°C. Can also be used for lighter chemicals and mild acids. Product group: Part number 1454-10-06 1454-10-08 1454-10-12 1454-10-16 1454-10-20 1454-10-24 1454-10-25 1454-10-32 1454-10-40 1454-10-48

PRODUCT CATALOGUE 2009

149 ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

10.0 13.0 19.0 25.0 32.0 38.0 40.0 50.0 63.0 76.0

20.0 23.0 31.0 39.0 46.0 54.0 56.0 69.0 81.0 95.0

0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7

100.0 130.0 190.0 250.0 320.0 380.0 400.0 500.0 630.0 760.0

0.35 0.40 0.60 0.78 1.05 1.23 1.26 1.69 2.09 2.41

40 40 40 40 40 40 40 40 40 40

75


1454-30 NIAGARA, STEAM HOSE, DIN 2825, 18 BAR Construction Inner tube:

Heat resistant rubber (EPDM)

Cover:

Heat and abrasion resistant rubber (EPDM)

Reinforcement:

Two spirals of corrosion proofed steel

Safety factor:

10:1

Temperature:

-40°C – +210°C

Design:

Wrapped, black

Applications/Characteristics Steam hose suitable for high pressures and temperatures to be used for heating and cleaning. According to DIN 2825. Product group: Part number 1454-30-08 1454-30-12 1454-30-16 1454-30-24 1454-30-32

1458

149 ID mm

OD mm

13.0 19.0 25.0 38.0 50.0

25.0 33.0 40.0 54.0 68.0

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

1.8 1.8 1.8 1.8 1.8

0.49 0.76 1.04 1.57 2.53

60 60 60 60 60

CASPIAN, BOAT SANITARY HOSE Construction Inner tube:

Diffusion proofed rubber (EPDM)

Cover:

EPDM

Reinforcement:

Synthetic textile with a steel spiral

Safety factor:

3:1

Temperature:

-30°C – +100°C

Design:

Wrapped, white

Applications/Characteristics A hose for lavatories on boats. Will not release odour from the toilet system. Resistant to high vacuum. Product group: Part number 1458-00-12 1458-00-16 1458-00-24

76

150 ID mm

OD mm

19.0 25.0 38.0

29.0 35.0 48.0

Work pr. Vacuum pr. Bend rad. MPa Max % mm 1.0 0.7 0.7

121 160 240

0.80 0.94 1.38

Weight kg/m

Length m/coil

80 80 80

40 40 40

PRODUCT CATALOGUE 2009


1458-10 WATER HOSE, 10 BAR

1:4

Construction Inner tube:

Blue PVC

Cover:

PVC

Reinforcement:

Knitted textile

Safety factor:

2.2:1

Temperature:

-15°C – +60°C

Design:

Smooth, white

Applications/Characteristics An excellent food approved hose well suitable for boats and trailers. The cover has good UV-resistance and the inner tube is cadmium free. The design prevents algal bloom in the hose. The hose has a very good bend radius. Product group: Part number 1458-10-08 1458-10-10

141 ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

12.5 15.0

17.8 20.8

1.0 1.0

125 150

0.15 0.20

15 15

1404-30 SHARKHOSE, FISH PUMP HOSE Construction Inner tube:

PVC

Cover:

PVC

Reinforcement:

PCV spiral

Safety factor:

3:1

Temperature:

-25°C – +55°C

Design:

Corrugated, transparent

Applications/Characteristics A durable and flexible hose with smooth inner tube suitable for pumping up fish. Transparent with a grey PVC spiral. The hose is only delivered in fixed lengths. Product group: Part number 1404-32-03 1404-32-54 1404-33-05

PRODUCT CATALOGUE 2009

141 ID mm

OD mm

203.0 254.0 305.0

233.0 290.0 347.0

Work pr. Bend rad. MPa mm 2.0 1.5 1.5

600 1000 1500

Weight Vacuum pr. kg/m Max % 9.2 14.5 19.0

95 95 95

Length m/coil 10 10 10

77


1460 VENTILATION HOSE, PVC Construction Inner tube:

PVC

Cover:

PVC

Reinforcement:

PVC spiral

Temperature:

-10°C – +60°C

Design:

Corrugated, blue

Applications/Characteristics A hose for extraction of dust, welding smoke and chimney gas. The hose is suitable as ventilation hose. It can also be used as cable collector and hose protection. Product group: Part number 1460-00-24 1460-00-32 1460-00-40 1460-00-48 1460-00-64 1460-00-96

146 ID mm

Thickness Bend rad. mm mm

38.0 51.0 63.0 76.0 102.0 152.0

0.5 0.5 0.5 0.5 0.5 0.6

50 90 100 110 160 280

Weight Vacuum pr. kg/m Max % 0.19 0.29 0.46 0.55 0.75 1.50

3 3 3 3 2 2

Length m/coil 30 30 30 30 30 20

1460-40 DRY-UP HOSE FOR CONSTRUCTION SITES Construction Tube:

PE

Temperature:

Max +80°C

Applications/Characteristics Hot air hose for drying-up applications at constructions sites. Product group:

Part number 1460-40-96

78

148

ID mm 150.0

Thickness mm 0.1

Length m/coil

100

PRODUCT CATALOGUE 2009


1460-45 DRY-UP HOSE FOR CONSTRUCTION SITES

1:4

Construction Tube:

PE

Temperature:

Max +80°C

Applications/Characteristics Hot air hose for drying-up applications at constructions sites with hook-up holes. Product group:

Part number 1460-45-96

148

ID mm

Thickness mm

150.0

0.3

Length m/coil

100

1560-10 DEFROST HOSE, APK Construction Inner cover:

Glue-covered paper

Cover:

Aluminium foil

External cover:

PP foil

Temperature:

-20°C – +100°C

Design:

Smooth, black

Applications/Characteristics A hose suitable for transportation of hot and fresh air in boats and vehicles. It is heat and vibration resistant. Available in dimensions from 24mm up to 200mm. Product group: Part number 1560-10-32 1560-10-38 1560-10-39 1560-10-51

PRODUCT CATALOGUE 2009

148 ID mm

OD mm

Weight kg/m

Length m/coil

50.0 55.0 60.0 80.0

55.0 60.0 65.0 85.0

0.13 0.14 0.16 0.21

20 20 20 20

79


1460-50 VENTILATION HOSE, ALU Construction Inner tube:

Aluminium laminate

Cover:

Polymer

Reinforcement:

Steel spiral

Temperature:

-30°C – +140°C

Design:

Corrugated, grey

Applications/Characteristics A hose suitable for transportation of hot steam, smoke and exhaust gases. Product group: Part number 1460-50-64 1460-50-72 1460-50-80 1460-50-88 1460-50-96 1460-51-60 1460-52-03 1460-52-29 1460-52-56 1460-53-05 1460-53-56 1460-54-05 1460-54-57 1460-55-08

148 ID mm

Length m/coil

102.0 115.0 127.0 140.0 152.0 160.0 203.0 229.0 254.0 305.0 356.0 406.0 457.0 508.0

10 10 10 10 10 10 10 10 10 10 10 10 10 10

1460-20 VENTILATION AND KITCHEN FAN HOSE Construction Inner tube:

PVC-covered wowen fiberglass

Cover:

PVC-covered wowen fiberglass

Reinforcement:

PVC-jacketed steel spiral

Temperature:

-5°C – +90°C

Design:

Corrugated, grey

Applications/Characteristics This hose is approved to be used as a kitchen fan hose between the ventilation duct and device. Low-weight and axially compressable. The hose has good resistance towards chemicals and decay. Type approved according to TG certificate number 3432/82. Product group: Part number 1460-20-48 1460-20-64 1460-20-80 1460-20-96 1460-21-60 1460-21-78 1460-22-03 1460-22-54 1460-23-05 1460-23-18 1460-25-10

80

148 ID mm

Work pr. MPa

Weight kg/m

Length m

76.0 102.0 127.0 152.0 160.0 178.0 203.0 254.0 305.0 318.0 510.0

0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.01 0.01 0.01

0.36 0.46 0.56 0.62 0.65 0.80 1.15 1.43 1.70 1.81 2.73

6 6 6 6 6 6 6 6 6 6 6

PRODUCT CATALOGUE 2009


1561

EXHAUST HOSE FOR HOT AIR, NEOPREN

1:4

Construction Cover:

Neoprene, single coated (CR)

Reinforcement:

Wowen fiberglass, steel spiral

Temperature:

-50°C – +150°C

Design:

Slightly corrugated, black

Applications/Characteristics A hose suitable for transportation of hot seams, smoke and exhaust gases. Low-weight and very flexible, good in tight areas. The hose is non-inflammable and has good chemical resistance. Other dimensions are available on request. Product group: Part number 1561-00-16 1561-00-20 1561-00-29 1561-00-32 1561-00-40 1561-00-48 1561-00-55 1561-00-64 1561-00-80 1561-00-96 1561-01-80 1561-02-03 1561-02-54 1561-03-05

148 ID mm

WP kPa 23°C

Bend rad. mm

Weight kg/m

Vacuum pr. kPa 23°C

Length m/coil

25.0 32.0 44.0 51.0 63.0 76.0 89.0 102.0 127.0 152.0 180.0 203.0 254.0 305.0

135 130 120 120 103 103 85 85 68 68 50 50 30 25

13 16 19 19 25 25 32 32 38 44 51 57 70 83

0.12 0.16 0.21 0.25 0.31 0.42 0.50 0.56 0.80 1.04 1.21 1.39 2.00 2.41

52 52 47 43 43 34 34 26 17 14 10 7 4 3

4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0

1561-10 EXHAUST HOSE FOR HOT AIR, NEOPREN, DOUBLE Construction Inner tube:

Neoprene (CR)

Cover:

Neoprene (CR)

Reinforcement:

Wowen fiberglass, steel spiral

Temperature:

-50°C – +150°C

Design:

Slightly corrugated, black

Applications/Characteristics A hose suitable for transportation of hot seams, smoke and exhaust gases. Low-weight and extremely flexible, good in tight areas. The hose is non-inflammable and has good chemical resistance. Other dimensions are available on request. Product group: Part number 1561-10-16 1561-10-20 1561-10-29 1561-10-32 1561-10-40 1561-10-48 1561-10-55 1561-10-64 1561-10-80 1561-10-96 1561-11-80 1561-12-03

PRODUCT CATALOGUE 2009

148 ID mm

WP kPa 23°C

Bend rad. mm

Weight kg/m

Vacuum pr. kPa 23°C

Length m/coil

25.0 32.0 44.0 51.0 63.0 76.0 89.0 102.0 127.0 152.0 180.0 203.0

205 185 170 170 135 135 103 103 68 50 45 30

16 20 25 25 32 32 38 38 44 51 64 70

0.15 0.17 0.26 0.29 0.36 0.46 0.53 0.60 0.86 1.10 1.28 1.43

52 52 47 43 34 34 26 26 22 17 10 7

4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0

81


1562

EXHAUST HOSE FOR HOT AIR, SILICONE Construction Cover:

Silicone, single coated

Reinforcement:

Wowen fiberglass, steel spiral

Temperature:

-50°C – +300°C

Design:

Slightly corrugated, red-brown

Applications/Characteristics A hose suitable for transportation of hot seams, smoke and exhaust gases. Low-weight and extremely flexible, good in tight areas. The hose is non-inflammable and has good chemical resistance. Other dimensions are available on request. Product group: Part number 1562-00-16 1562-00-20 1562-00-29 1562-00-32 1562-00-40 1562-00-48 1562-00-55 1562-00-64 1562-00-80 1562-00-96 1562-01-80 1562-02-03 1562-02-54 1562-03-05

148 ID mm

WP kPa 23°C

Bend rad. mm

Weight kg/m

Vacuum pr. kPa 23°C

Length m/coil

25.0 32.0 44.0 51.0 63.0 76.0 89.0 102.0 127.0 152.0 180.0 203.0 254.0 305.0

135 130 120 120 103 103 85 85 68 68 50 50 30 25

13 16 19 19 25 25 32 32 38 44 51 57 70 83

0.12 0.16 0.21 0.25 0.31 0.42 0.50 0.56 0.80 1.04 1.21 1.39 2.00 2.41

52 52 47 43 43 34 34 26 17 14 10 7 4 3

4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0

1562-10 EXHAUST HOSE FOR HOT AIR, SILICONE, DOUBLE Construction Inner tube:

Silicone

Cover:

Silicone

Reinforcement:

Wowen fiberglass, steel spiral

Temperature:

-50°C – +300°C

Design:

Slightly corrugated, red-brown

Applications/Characteristics A hose suitable for transportation of hot seams, smoke and exhaust gases. Low-weight and extremely flexible, good in tight areas. The hose is non-inflammable and has good chemical resistance. Other dimensions are available on request. Product group:

82

148

Part number

ID mm

WP kPa 23°C

Bend rad. mm

Weight kg/m

Vacuum pr. kPa 23°C

Length m/coil

1562-10-16 1562-10-20 1562-10-29 1562-10-32 1562-10-40 1562-10-48 1562-10-55 1562-10-64 1562-10-80 1562-10-96 1562-11-80 1562-12-03

25 32 44 51 63 76 89 102 127 152 180 203

205 185 170 170 135 135 103 103 68 50 45 30

16 20 25 25 32 32 38 38 44 51 64 70

0.15 0.17 0.26 0.29 0.36 0.46 0.53 0.60 0.86 1.10 1.28 1.43

52 52 47 43 34 34 26 26 22 17 10 7

4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0

PRODUCT CATALOGUE 2009


1461 VENTILATION AND MATERIAL SUCTION HOSE, PVC

1:4

Construction Inner tube:

PVC

Cover:

PVC

Reinforcement:

PVC nylon spiral

Temperature:

-15°C – +60°C

Design:

Corrugated, metalic grey

Applications/Characteristics A powerful and flexible PVC hose. Smooth internally and will not kink. Suitable as exhaust hose for industrial dusts within all kinds of industries. Especially suitable for industrial vacuum cleaners. Product group: Part number 1461-00-12 1461-00-16 1461-00-20 1461-00-24 1461-00-25 1461-00-30 1461-00-32 1461-00-40 1461-00-48 1461-00-64 1461-00-80 1461-00-96

148 ID mm 19.0 25.0 32.0 38.0 40.0 45.0 51.0 60.0 76.0 100.0 125.0 150.0

OD Vacuum pr. Bend rad. mm Max % mm 21.3 26.3 33.3 39.3 47.8 53.4 51.3 64.3 77.3 103.3 126.3 151.3

35 35 35 35 35 35 35 35 35 35 35 35

20 25 32 38 40 45 51 60 76 102 125 150

Weight kg/m

Length m/coil

0.13 0.18 0.27 0.34 0.36 0.42 0.52 0.64 0.85 1.27 1.70 2.15

60 60 60 30 30 30 30 30 30 30 30 30

1461-30 MATERIAL SUCTION HOSE, SELF-EXTINGUISHING Construction Inner tube:

PVC

Cover:

PVC

Reinforcement:

PVC spiral

Temperature:

-10°C – +60°C

Design:

Corrugated, grey

Applications/Characteristics A flexible, self-extinguishing PVC hose suitable for material suction and ventilation. Selfextinguishing according to UL 94 V2. Product group: Part number 1461-30-12 1461-30-16 1461-30-20 1461-30-24 1461-30-25 1461-30-30 1461-30-32 1461-30-39 1461-30-40 1461-30-48 1461-30-64 1461-30-80 1461-30-96

PRODUCT CATALOGUE 2009

148 ID Vacuum pr. Bend rad. mm Max % mm 20.0 25.0 32.0 38.0 40.0 45.0 50.0 60.0 63.0 75.0 100.0 125.0 150.0

50 50 50 50 40 40 40 40 40 40 40 40 40

20 25 32 38 40 45 50 60 63 75 100 125 150

Weight kg/m

Length m/coil

0.15 0.18 0.24 0.31 0.33 0.37 0.44 0.56 0.60 0.75 1.01 1.36 1.76

50 50 50 50 50 50 50 50 50 50 30 30 30

83


1560

DUST SUCTION HOSE SD Construction Inner tube:

PVC

Cover:

PVC

Reinforcement:

Semi-embedded plastic covered steel spiral

Temperature:

0°C – +80°C

Design:

Corrugated, black, net reinforced with transparent cover

Applications/Characteristics A very flexible and low-weight dust suction hose with good resistance to tearing, suitable for the industry. End and seam fittings are available in dimensions 28, 32, 44 and 51 mm. 148

Product group:

Part number

ID Vacuum pr. Bend rad. mm Max % mm

1560-00-16 1560-00-18 1560-00-20 1560-00-24 1560-00-30 1560-00-32 1560-00-40 1560-00-48

25.0 28.0 32.0 38.0 44.0 51.0 63.0 76.0

93 92 92 81 73 60 43 40

12 12 15 20 20 20 30 35

Weight kg/m

Length m/coil

0.20 0.22 0.23 0.30 0.36 0.44 0.52 0.85

15 15 15 15 15 15 15 15

1461-10 FOOD HOSE, TRANSPARENT Construction Inner tube:

PVC

Cover:

PVC

Reinforcement:

Steel spiral

Safety factor:

3:1

Temperature:

-5°C – +65°C

Design:

Smooth, transparent

Applications/Characteristics A hose suitable for transportation of salt water, granualtes, chemicals, grains etc. The hose will sustain high vacuum in all dimensions. Food approved. Product group: Part number 1461-10-06 1461-10-08 1461-10-10 1461-10-12 1461-10-16 1461-10-19 1461-10-20 1461-10-24 1461-10-30 1461-10-32 1461-10-39 1461-10-40 1461-10-48

84

141 ID mm

OD mm

10.0 12.0 16.0 20.0 25.0 30.0 32.0 38.0 45.0 50.0 60.0 63.0 75.0

16.0 18.0 22.4 26.8 33.0 38.4 40.4 47.0 55.0 60.0 72.0 74.5 88.6

Work pr. Bend rad. MPa mm 0.70 0.70 0.60 0.50 0.50 0.45 0.45 0.40 0.30 0.30 0.20 0.60 0.20

20 25 35 50 60 70 75 90 110 125 130 130 200

Weight Vaccum pr. kg/m Max % 0.16 0.18 0.25 0.34 0.51 0.60 0.65 0.80 1.10 1.20 1.80 1.80 2.50

85 85 85 85 85 85 85 85 80 80 80 80 70

Length m/coil 60 60 60 60 60 60 60 30 30 30 30 50 30

PRODUCT CATALOGUE 2009


1461-40 SUCTION AND PRESSURE HOSE, PU/PVC, TRANSPARENT

1:4

Construction Inner tube:

Polyurethane (PU)

Cover:

PVC

Reinforcement:

Steel spiral

Safety factor:

See table below

Temperature:

-20°C – +90°C

Design:

Smooth, transparent

Applications/Characteristics A powerful and very flexible PVC hose suitable for suction and pressure. It is resistant to hydraulic oils. The hose can also be used to transport dry food. Crystal clear and food approved. Product group:

143

Part ID OD WP BP BP number mm mm MPa MPa MPa 20°C 70°C

1462

Bend. rad Weight Vaccum pr. Length mm kg/m Max % m

1461-40-03

5.0

10.0

2.0

13.0

2.8

20

0.08

90

60

1461-40-04

6.3

11.3

2.0

12.5

2.6

26

0.10

90

60

1461-40-05

8.0

13.4

1.8

11.0

2.4

32

0.135

90

60

1461-40-06

10.0

16.0

1.8

10.5

2.3

40

0.17

90

60

1461-40-08

12.5

18.7

1.5

8.0

2.0

50

0.23

90

60

1461-40-10

16.0

23.0

1.4

7.5

1.8

63

0.29

90

60

1461-40-12

19.0

26.0

1.2

7.2

1.7

76

0.35

90

60

INDUSTRIAL DUST SUCTION HOSE, PE Construction Inner tube:

Polyethylene (PE)

Cover:

Polyethylene (PE)

Temperature:

-30°C – +70°C

Design:

Corrugated, grey

Applications/Characteristics A flexible hose suitable for suction of dusts and lighter particles in stationary and mobile weld taps, industrial vacuum cleaners and powder separators. The hose can be run over. It is also available in antistatic design, see 1462-10-xx. Product group:

Part number 1462-00-16 1462-00-20 1462-00-24 1462-00-32

PRODUCT CATALOGUE 2009

148

ID mm

OD mm

25.0 32.0 38.0 51.0

32.0 40.0 48.0 62.0

Work pr. Bend rad. MPa mm 0.08 0.08 0.08 0.07

60 72 85 115

Weight Vacuum pr. kg/m Max % 0.25 0.27 0.37 0.48

80 80 80 70

Length m/coil 15 15 15 15

85


1462-10 INDUSTRIAL DUST SUCTION HOSE, PE, ANTISTATIC Construction Inner tube:

Polyethylene (PE)

Cover:

Polyethylene (PE)

Temperature:

-30°C – +70°C

Design:

Corrugated, black

Applications/Characteristics A flexible hose, with electrical conductor qualities, suitable when there is a risk of a dust explosion. Suitable for hand tools and industrial vacuum cleaners. Cold resistant. Electrical resistance: 103–106 Ohm/m. Product group: Part number 1462-10-24 1462-10-32

148 ID mm

OD mm

38.0 51.0

49.0 62.0

Work pr. Bend rad. MPa mm 0.08 0.07

85 115

Weight Vacuum pr. kg/m Max % 0.36 0.48

80 70

Length m/coil 15 15

Other dimensions available on request.

1463-10 VACUUM HOSE, POLYURETHANE Construction Inner tube:

Polyurethane (PU)

Cover:

Polyurethane (PU)

Reinforcement:

PVC spiral

Temperature:

-25°C – +85°C

Design:

Corrugated, transparent

Applications/Characteristics A hose suitable for ventilation; suction of gases, smoke, dust pellets; and for transportation of mineral wool insulation. The hose is internally smooth and very flexible. Food approved. Also available in antistatic design, see 1463-40-xx. Product group: Part number 1463-10-20 1463-10-24 1463-10-30 1463-10-32 1463-10-39 1463-10-40 1463-10-48 1463-10-50 1463-10-55 1463-10-34 1463-10-80 1463-10-90 1463-11-60

86

147 ID mm 32.0 38.0 45.0 50.0 60.0 63.0 75.0 80.0 90.0 100.0 125.0 150.0 160.0

Thickness Bend rad. mm mm 0.6 0.6 0.6 0.7 0.7 0.7 0.7 0.7 0.8 0.8 0.8 0.9 0.9

32 38 45 50 60 65 75 80 90 100 125 150 160

Weight Vaccum pr. kg/m Max % 0.19 0.25 0.32 0.39 0.44 0.47 0.60 0.65 0.75 0.85 1.17 1.45 1.70

40 30 30 30 30 30 30 30 30 30 30 30 30

Length m/coil 20 20 20 20 20 20 20 20 20 20 20 20 20

PRODUCT CATALOGUE 2009


1463-40 VACUUM HOSE, POLYURETHANE, ANTISTATIC

1:4

Construction Inner tube:

Polyurethane (PU)

Cover:

Polyurethane (PU)

Reinforcement:

PVC spiral with antistatic wire

Temperature:

-25°C – +85°C

Design:

Corrugated, transparent

Applications/Characteristics A hose suitable in situations when a grounded braid is needed to transport abrasive materials, mineral wool insulation and ventilation. The hose is made of polyurethane and is very flexible. Food approved. Product group:

147

Part number 1463-40-20 1463-40-22 1463-40-24 1463-40-32 1463-40-39 1463-40-40 1463-40-48 1463-40-64 1463-40-80 1463-40-96

ID mm

Thickness Bend rad. mm mm

32.0 35.0 40.0 50.0 60.0 63.0 75.0 100.0 125.0 150.0

0.6 0.6 0.6 0.7 0.7 0.7 0.7 0.8 0.8 0.9

32 35 40 50 60 63 75 100 125 150

Weight Vaccum pr. kg/m Max % 0.24 0.25 0.33 0.44 0.50 0.53 0.66 0.92 1.25 1.60

Length m/coil

40 40 30 30 30 30 30 30 30 30

20 20 20 20 20 20 20 20 20 20

1563-20 POLYURETHANE HOSE L 0.4 Construction Inner tube:

Polyurethane (PU)

Cover:

Polyurethane (PU)

Reinforcement:

Copper-coloured steel spiral

Temperature:

-40°C – +90°C

Design:

Corrugated, transparent

Applications/Characteristics A very light weighted hose delivered in a “compact"-package. The hose is very durable and suitable for the food and pharmaceutical industries. Areas of usage: Ventilation, pellet burner, oil mist. The hose is resistant to hydrolysis and microbes. Product group: Part number

147 ID mm

Thickness mm

Bend rad. mm

1563-20-32 50.0 0.4 1563-20-40 63.0 0.4 1563-20-48 76.0 0.4 1563-20-50 80.0 0.4 1563-20-55 90.0 0.4 1563-20-64 100.0 0.4 1563-20-70 110.0 0.4 1563-20-73 114.0 0.4 1563-20-80 125.0 0.4 1563-20-96 150.0 0.4 1563-21-30 130.0 0.4 1563-21-60 160.0 0.4 1563-21-80 180.0 0.4 1563-22-03 200.0 0.4 228.0 0.4 1563-22-28 1563-22-54 250.0 0.4 1563-23-00 300.0 0.4 1563-23-05 305.0 0.4 1563-23-18 318.0 0.4 1563-23-25 325.0 0.4 1563-23-50 350.0 0.4 1563-24-08 400.0 0.4 Lengths of 10–15 meters are also available on request.

PRODUCT CATALOGUE 2009

35 42 53 56 62 70 75 78 88 105 90 115 125 140 155 175 218 215 220 230 245 280

Weight kg/m

Vaccum pr. Max %

Length m/coil

0.30 0.34 0.43 0.46 0.49 0.51 0.56 0.60 0.65 0.78 0.68 0.81 0.91 1.05 1.13 1.25 1.55 1.57 1.65 1.72 1.81 2.10

20 15 10 10 10 9 8 8 8 6 7 6 6 5 4 4 3 3 3 2 2 2

6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

87


1563-30 POLYURETHANE HOSE M 0.7 Construction Inner tube: Cover: Reinforcement: Temperature: Design:

Polyurethane (PU) Polyurethane (PU) Copper-coloured steel spiral -40°C – +100°C Corrugated, transparent, internally smooth

Applications/Characteristics Powerful and flexible suction hose for transportation of materials such as gravels, cement, sand, sawdust, gasoline, oil products and food. The hose is suitable in areas such as sawmills, plastic and paper industries, wood shaving, contractor businesses. Good resistant towards solvents and good aging characteristics. It is also resistant to oil mist and microbes, and can be used in damp environments. Halogen free. (Length 10 m available on request). Product group: 147 Part number 1563-30-20 1563-30-24 1563-30-32 1563-30-40 1563-30-48 1563-30-50 1563-30-55 1563-30-64 1563-30-80 1563-30-96 1563-31-40 1563-31-60 1563-32-03 1563-32-54 1563-33-05

ID mm

Work pr. Bend rad. Bar mm

32.0 38.0 50.0 63.0 75.0 80.0 90.0 100.0 125.0 150.0 140.0 160.0 200.0 250.0 305.0

1.25 1.15 1.00 1.00 0.80 0.80 0.70 0.60 0.50 0.40 0.40 0.40 0.25 0.20 0.15

Weight Vaccum pr. kg/m Max %

32 38 50 63 75 80 90 100 125 150 140 160 200 250 300

0.35 0.40 0.45 0.48 0.60 0.65 0.73 0.84 0.98 1.12 1.06 1.20 1.50 1.93 2.31

40 40 25 25 20 20 20 18 15 10 10 8 5 4 2

Length m/coil 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15

1563-50 POLYURETHANE HOSE H 1.4 Construction Inner tube:

Polyurethane (PU)

Cover:

Polyurethane (PU)

Reinforcement:

Copper-coloured steel spiral

Temperature:

-40°C – +90°C

Design:

Corrugated, transparent, internally smooth

Applications/Characteristics A very powerful PU-hose for transportation of strong abrasive particles. The hose is suitable for industrial vacuum cleaning, granulates and splinters. It is also resistant to oil mist and microbes, and can be used in damp environments. Halogen free. Product group:

Part number 1563-50-32 1563-50-40 1563-50-48 1563-50-64 1563-50-76 1563-50-80 1563-50-85 1563-50-96

88

147

ID Thickness Work pr. mm mm Bar 50.0 63.0 76.0 100.0 120.0 127.0 140.0 150.0

1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4

1.9 1.8 1.2 1.1 0.9 0.8 0.7 0.7

Bend rad. mm 75 90 113 150 180 185 210 225

Weight Vacuum kg/m Max % 0.67 0.79 0.98 1.36 1.42 1.54 1.75 1.82

60 55 50 40 30 25 20 20

Length m/coil 10 10 10 10 10 10 10 10

PRODUCT CATALOGUE 2009


1563-70 POLYURETHANE HOSE HD T 2.0

1:4

Construction Inner tube:

Polyurethane (PU)

Cover:

Polyurethane (PU)

Reinforcement:

Copper-coloured steel spiral

Temperature:

-40°C – +90°C

Design:

Corrugated, transparent, internally smooth

Applications/Characteristics An extremely powerful PU-hose for both suction and pressure transports of abrasive materials such as sand, granulates and splinters. The hose is suitable in the contractor business area, the wood and plastic industries. It is food approved and sustains oil mist. It is also resistant towards microbes and can be used in damp environments. Product group: Part number 1563-70-25 1563-70-32 1563-70-48 1563-70-64

1464

147 ID Thickness Work pr. mm mm Bar 40.0 50.0 76.0 100.0

2.0 2.0 2.0 2.0

Bend rad. mm

4.2 3.8 2.7 1.9

Vacuum Weight Max % kg/m

160 200 300 400

0.90 0.95 0.95 0.95

0.76 1.00 1.51 2.13

Length m/coil 10 10 10 10

SANDSTONE, BLASTING HOSE, 10 BAR Construction Inner tube:

Abrasion resistant rubber (NR/BR)

Cover:

Synthetic abrasion and weather resistant rubber (SBR)

Reinforcement:

Synthetic textile

Safety factor:

4:1

Temperature:

-30°C – +70°C

Design:

Wrapped, black

Applications/Characteristics A hose suitable for sand or steel sand blasting. It can also be used for concrete cast, and as transportation/deliverance of abrasive particles. According to the latest European norm EN IOS 3861. Product group:

Part number 1464-00-08 1464-00-12 1464-00-16 1464-00-20 1464-00-24 1464-00-26 1464-00-30 1464-00-32 1464-00-52

PRODUCT CATALOGUE 2009

147

ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

13.0 19.0 25.0 32.0 38.0 40.0 45.0 50.0 80.0

25.0 33.0 39.0 48.0 58.0 60.0 65.0 72.0 105.0

1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0

200 230 300 380 460 480 540 600 960

0.48 0.75 0.94 1.24 1.85 1.92 2.00 2.66 4.57

40 40 40 40 40 40 40 40 40

89


1464-10 MARBLE, CONCRETE CAST HOSE, 40 BAR Construction Inner tube:

Abrasion resistant rubber (NR/BR)

Cover:

Synthetic abrasion and weather resistant rubber (SBR)

Reinforcement:

Synthetic textile

Safety factor:

3:1

Temperature:

-40°C – +70°C

Design:

Wrapped, black

Applications/Characteristics A hose suitable for wet-casting of concrete mixtures at mobile or stationary applications. Also excellent to use as transportation hose between pump and nozzle (for pre-mixed concrete). The thick tube prevents kink in the hose. Product group:

Part number 1464-10-12 1464-10-16 1464-10-20 1464-10-22 1464-10-24 1464-10-32 1464-10-40 1464-10-48 1464-10-64

147

ID mm

OD mm

Work pr. MPa

Bend rad. mm

Weight kg/m

Length m/coil

19.0 25.0 32.0 35.0 38.0 51.0 63.5 76.0 100.0

31.0 37.0 44.0 49.0 54.0 68.0 85.0 98.0 128.0

4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0

120 160 220 250 300 400 500 600 750

0.60 0.82 1.08 1.18 1.42 2.02 2.94 3.78 6.10

40 40 40 40 40 40 40 40 40

1464-50 SHALE, CONCRETE PUMP HOSE, 80 BAR Construction Inner tube:

NR/SBR

Cover:

NR/SBR

Reinforcement:

Steel spiral

Temperature:

-40°C – +70°C

Design:

Wrapped, black

Applications/Characteristics A hose suitable for placing and transporting concrete from beam. The very robust design prevents kink in the hose and makes it easy to use as well as flexible. It sustains high pressures. Deliverance usually fully assembled with fluid connectors. The pre-assembling is done in-house in Sweden. Product group: Part number 1464-50-32 1464-50-40 1464-50-48 1464-50-64 1464-50-80

90

147 ID mm

OD mm

Work pr. MPa

Bend rad. mm

51.0 65.0 76.0 100.0 125.0

75.0 89.0 104.0 128.0 153.0

8.0 8.0 8.0 8.0 8.0

380 400 400 550 700

Weight kg/m 3.96 4.84 6.21 9.67 15.16

PRODUCT CATALOGUE 2009


1465-30 LIMESTONE, CONCRETE AND GRANULATE HOSE, 6 BAR

1:4

Construction Inner tube:

Durable, antistatic rubber (NR/SBR)

Cover:

Abrasion, weather and ozone resistant rubber

Reinforcement:

Synthetic textile

Safety factor:

3:1

Temperature:

-40°C – +70°C

Design:

Wrapped, black

Applications/Characteristics A very robust and durable hose suitable for transportation of concrete, sand, gravel, animal feed and granulates. Can also be used in pneumatic applications between trucks and silos. Product group:

Part number 1465-30-48 1465-30-56 1465-30-64 1465-30-80 1465-30-96

1565

147

ID mm

OD mm

Work pr. MPa

Weight kg/m

Length m/coil

76.0 90.0 102.0 127.0 152.0

92.0 106.0 119.0 145.0 170.0

0.6 0.6 0.6 0.6 0.6

2.75 2.96 3.36 4.20 5.05

40 40 40 40 40

CHLORIET, MATERIAL HOSE, LAY-FLAT Construction Inner tube:

Abrasion resistant rubber (NR/BR)

Cover:

Abrasion and weather resistant rubber (SBR)

Reinforcement:

Synthetic textile

Safety factor:

3:1

Temperature:

-35°C – +80°C

Design:

Wrapped, black

Applications/Characteristics An all-round clearing hose with an abrasion resistent inner tube. It is suitable for transportation of wet and dry concrete, sand or gravel. Electrical resistance: <106 Ohm. Can be stored lay-flat. Product group:

Part number 1565-00-64 1565-00-80 1565-00-96

PRODUCT CATALOGUE 2009

147

ID mm

OD mm

Work pr. MPa

Weight kg/m

Length m/coil

100.0 125.0 150.0

108.0 134.0 160.0

0.6 0.5 0.4

1.45 2.10 2.75

40 40 20

91


1466

DOLMITE, INDUSTRIAL DUST SUCTION HOSE Construction Inner tube:

Abrasion resistant rubber

Cover:

Durable, weather resistant rubber

Reinforcement:

Wowen polyester and a steel spiral

Temperature:

-40°C – +90°C

Design:

Corrugated, black

Applications/Characteristics A exhaust hose suitable for particles, sand, dust and powder within the engineering industry. Can also be used as exhaust hose for grains. Available with cable heads. Product group: Part number 1466-00-24 1466-00-32 1466-00-40 1466-00-42 1466-00-48 1466-00-64 1466-00-70 1466-00-80 1466-00-96 1466-02-02 1466-02-20

147 ID mm

38.0 50.0 60.0 63.0 76.0 102.0 110.0 127.0 152.0 202.0 220.0

OD Bend rad. mm mm 44.0 56.0 66.0 70.0 83.0 110.0 118.0 135.0 162.0 211.0 230.0

70 75 100 105 120 150 160 175 200 203 220

Weight Vaccum pr. kg/m Max % 0.55 0.71 0.85 0.97 1.25 1.90 2.05 2.35 2.52 3.04 3.39

80 80 80 80 80 80 80 80 80 80 80

Length m/coil 20 20 20 20 10 10 10 10 10 10 10

1467-45 SLATE, SANITATION SUCTION HOSE, M45 Construction Inner tube:

Abrasion resistant rubber (NR)

Cover:

Durable, weather resistant rubber (SBR)

Reinforcement:

Synthetic textile and a steel spiral

Temperature:

-40°C – +70°C

Design:

Corrugated, black

Applications/Characteristics An elastic and flexible hose suitable for sanitation vehicles. The hose is designed for normal abrasion situations. It is only available in fixed lengths. Product group:

Part number 1467-45-48 1467-45-64 1467-45-80 1467-45-96 1467-45-03

92

147

ID Thickness ID Bend rad. mm mm mm 76.0 102.0 127.0 152.0 203.0

3.2 3.2 3.2 3.2 3.2

300 410 510 600 800

Weight Vaccum pr. kg/m Max % 1.9 2.8 3.4 4.3 7.9

80 80 80 80 80

Length m/coil 12 12 12 12 12

PRODUCT CATALOGUE 2009


1467-51 COAL, SANITATION SUCTION HOSE, M51

1:4

Construction Inner tube:

Abrasion resistant rubber (NR)

Cover:

Durable, weather resistant rubber (SBR)

Reinforcement:

Synthetic textile and a steel spiral

Temperature:

-40°C – +70°C

Design:

Corrugated, black

Applications/Characteristics An elastic and flexible hose suitable for sanitation vehicles. The hose is designed for heavy abrasion situations. It is only available in fixed lengths. Product group:

Part number 1467-51-64 1467-51-80 1467-51-96 1467-51-03

147

ID Thickness ID Bend rad. mm mm mm 102.0 127.0 152.0 203.0

4.0 4.0 4.0 4.0

510 640 760 1,000

Weight Vaccum pr. kg/m Max % 3.4 4.1 4.9 8.6

80 80 80 80

Length m/coil 12 12 12 12

1467-52 GRANULITE, TRANSPORTATION HOSE M52 Construction Inner tube:

Abrasion resistant rubber (NR)

Cover:

Abrasion, ozone and weather resistant rubber (SBR)

Reinforcement:

Synthetic textile and a steel spiral

Temperature:

-40°C – +70°C

Design:

Wrapped, black

Applications/Characteristics Transportation hose for sanitation vehicles. Can also be used as the bent part in central vacuum applications. Product group: Part number 1467-52-32 1467-52-40 1467-52-48 1467-52-56 1467-52-64 1467-52-69 1467-52-74 1467-52-80 1467-52-85 1467-52-96 1467-52-03

PRODUCT CATALOGUE 2009

147 ID mm 50.0 63.0 76.0 90.0 102.0 108.0 116.0 127.0 140.0 152.0 203.0

OD Bend rad. mm mm 63.0 76.0 89.0 103.0 116.0 122.0 131.0 142.0 156.0 168.0 223.0

300 380 460 540 600 650 450 760 840 900 1,200

Weight Vaccum pr. kg/m Max % 1.8 2.3 2.7 3.3 4.2 4.5 4.6 5.4 6.6 7.2 13.4

80 80 80 80 80 80 80 80 80 80 80

Length m/coil 40 40 40 40 40 40 40 40 40 40 20

93


1567

GNEISS, SANITATION SUCTION HOSE Construction Inner tube:

Abrasion resistant rubber (NR)

Cover:

Durable, weather resistant rubber (SBR)

Reinforcement:

Synthetic textile and a steel spiral

Temperature:

-40°C – +80°C

Design:

Corrugated, black

Applications/Characteristics A hose suitable as a work hose in industrial central vacuum cleaner applications. It is also suitable as main line in buildings. The hose can have a ground connection through the embedded steel spiral. Product group:

147

Part number

ID mm

1567-00-32 1567-00-40 1567-00-48 1567-00-56 1567-00-64 1567-00-74 1567-00-80 1567-00-96

50 63 76 90 102 115 127 152

Thickness ID Bend rad. mm mm 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0

150 160 170 200 210 220 250 370

Weight Vaccum pr. kg/m Max % 1.15 1.43 1.74 2.45 2.95 3.23 3.60 4.40

90 90 90 90 90 90 90 90

Length m/coil 40 40 40 40 40 20 20 20

1468 MATERIAL HOSE PVC/PU Construction Inner tube:

Polyurethane (PU)

Cover:

PVC

Reinforcement:

PVC spiral

Safety factor:

3:1

Temperature:

-25°C – +55°C

Design:

Corrugated, yellow and grey

Applications/Characteristics A suction and pressure hose for heavy abrasion . The inner tube of polyurethane makes the hose suitable for concrete, granulates and other abrasive materials. Product group: Part number 1468-00-20 1468-00-24 1468-00-30 1468-00-32 1468-00-40 1468-00-48 1468-00-55 1468-00-64 1468-00-80

94

147 ID mm

OD mm

32.0 38.0 45.0 50.0 63.0 76.0 89.0 102.0 127.0

41.0 47.0 55.0 61.0 74.0 89.0 103.0 117.0 144.0

Work pr. Bend rad. MPa mm 0.60 0.60 0.55 0.50 0.45 0.40 0.35 0.30 0.25

130 150 180 200 250 300 360 400 510

Weight Vacuum pr. kg/m Max % 0.60 0.70 0.90 1.05 1.39 1.70 2.25 2.70 3.90

70 70 70 70 70 70 70 70 70

Length m/coil 50 50 50 50 50 30 30 30 20

PRODUCT CATALOGUE 2009


1480

GAS EXHAUST HOSE, STAINLESS STEEL

1:4

Construction Material:

Stainless steel 1.4301 EN 10088-1 (AISI 304)

Temperature:

Up to +800°C

Design:

Corrugated

Applications/Characteristics Spiral wired gas exhaust hose for transportation of dry gases, hot air and smoke. The hose is also suitable for transportation of abrasive particles such as splinters, powder and pellets. Can also be used as mechanical cable protection.

Part number 1480-00-12 1480-00-14 1480-00-16 1480-00-19 1480-00-20 1480-00-22 1480-00-24 1480-00-25 1480-00-26 1480-00-30 1480-00-32 1480-00-38 1480-00-39 1480-00-40 1480-00-44 1480-00-48 1480-00-51 1480-00-53 1480-00-56 1480-00-62 1480-00-64 1480-00-68 1480-00-70 1480-00-74 1480-00-79 1480-00-80 1480-00-82 1480-00-85 1480-00-96 1480-01-75 1480-01-90 1480-02-00

ID mm

OD mm

20.0 22.0 25.0 30.0 32.0 35.0 38.0 40.0 42.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 85.0 90.0 100.0 102.0 105.0 110.0 115.0 125.0 127.0 130.0 140.0 150.0 175.0 190.0 200.0

24.8 26.0 29.8 34.8 36.0 39.0 42.0 44.5 46.5 49.5 54.5 59.5 64.5 69.5 74.5 79.5 84.5 89.5 94.5 105.0 107.0 110.0 115.0 120.0 130.0 132.0 135.0 145.0 155.0 180.0 195.0 205.0

Bend rad. mm 70 77 86 101 160 170 190 200 210 225 250 265 275 285 300 310 320 335 345 375 380 390 400 425 435 445 450 475 500 560 595 620

HYDROSCAND METAL HOSES Hydroscand offers a wide range of solutions with different metal hoses, exhaust gas hoses as well as pressure hoses with parallel and spiral wraps. Hydroscand’s metal hoses are suitable for transportation of gases, hot and cold fluids, and as vibration recovery in pipe lines.

l a i c SpeHoses

Hydroscand’s metal hoses are manufactured according to customer requirements and can be delivered with certifications of pressure and seal controls. Contact us for more information:

HYDROSCAND SPECIAL HOSES Myntgatan 1 S-591 61 Motala, Sweden

PRODUCT CATALOGUE 2009

Phone: +46 141 507 40 Fax: +46 141 528 80

E-mail: special.hoses@hydroscand.se

95


1484 METAL HOSE, PARALLEL WRAPPED Construction Inner tube:

Stainless steel 1.4541 EN 10088-1 (AISI 321) Suffix F

Stainless steel 1.4404 EN 10088-1 (AISI 316L) Suffix S

Wrapping:

Stainless steel 1.4301 EN 10088-1 (AISI 304)

Safety factor:

4:1

Temperature:

-200°C – +550°C

Applications/Characteristics Metal hose suitable for hot oils, chemicals, gases, exhaust gases, water, steam, vacuum etc. The hose can also be used as mechanical cable protection. Part number 1484-01-06F/S 1484-01-08F/S 1484-01-10F/S 1484-01-12F/S 1484-01-16F/S 1484-01-20F/S 1484-01-24F/S 1484-01-32F/S 1484-01-40F/S 1484-01-48F/S 1484-01-64F/S 1484-01-80F/S 1484-01-96F/S 1484-01-128F/S

ID mm

OD mm

Work pr. MPa

Bend rad. mm

10.6 12.3 15.7 19.8 25.8 33.0 40.0 51.6 66.0 76.6 103.0 127.5 151.5 200.0

17.5 19.5 25.2 30.3 36.0 45.7 54.0 67.5 87.9 100.0 128.0 154.5 180.0 232.0

7.50 7.00 6.50 5.00 4.00 3.50 3.00 2.50 2.00 1.80 1.40 1.25 1.00 0.60

190 210 285 310 375 405 480 550 675 750 920 1160 1320 1400

Weight kg/m 0.25 0.29 0.37 0.50 0.64 1.00 1.20 1.54 2.55 2.90 4.20 5.80 6.80 11.00

1485 METAL HOSE, TIGHT AND PARALLEL WRAPPED Construction Inner tube:

Stainless steel 1.4541 EN 10088-1 (AISI 321)

Wrapping:

Stainless steel 1.4301 EN 10088-1 (AISI 304

Safety factor:

4:1

Temperature:

-200°C – +550°C

Applications/Characteristics Metal hose suitable for hot oils, chemicals, gases, exhaust gases, water, steam, vacuum etc. The hose can also be used as mechanical cable protection. Extra flexible.

Part number 1485-01-24F 1485-01-32F 1485-01-40F 1485-01-48F 1485-01-64F 1485-01-80F 1485-01-96F

96

ID mm

OD mm

Work pr. MPa

Bend rad. mm

38.9 51.6 65.5 76.0 102.5 127.5 151.5

54.5 68.0 88.5 100.7 128.0 154.5 180.5

3.00 2.50 2.00 1.80 1.40 1.25 1.00

400 450 540 640 840 950 1,150

Weight kg/m 1.3 1.7 3.0 3.4 4.5 6.5 7.7

PRODUCT CATALOGUE 2009


1489 METAL HOSE, PARALLEL WRAPPED, MECHANICALLY SHAPED

1:4

Construction Inner tube:

Stainless steel 1.4401 EN 10088-1 (AISI 316L)

Wrapping:

Stainless steel 1.4301 EN 10088-1 (AISI 304)

Safety factor:

4:1

Temperature:

-200°C – +550°C

Applications/Characteristics Metal hose suitable for oils, chemicals, gases, exhaust gases, water, steam, vacuum etc. The hose can also be used as mechanical cable protection. 1489-01-xxS = simple wrap 1489-02-xxS = double wrap Part number 1489-01-04S 1489-02-04S 1489-01-05S 1489-02-05S 1489-01-06S 1489-02-06S

ID mm

OD mm

Work pr. MPa

Bend rad. mm

6.3 6.3 8.2 8.2 10.3 10.3

11.1 12.3 13.7 14.9 15.7 16.9

15.0 22.0 13.5 20.0 8.5 15.0

80.0 80.0 125.0 125.0 130.0 130.0

Weight kg/m 0.173 0.227 0.219 0.357 0.239 0.380

1481 MINIWAVE, METAL HOSE, PARALLEL WRAPPED Construction Inner tube:

Stainless steel 1.4541 EN 10088-1 (AISI 321)

Wrapping:

Stainless steel 1.4301 EN 10088-1 (AISI 304)

Safety factor:

4:1

Temperature:

-200°C – +550°C

Applications/Characteristics Metal hose suitable for hot oils, chemicals, gases, vacuum etc. Low-weight.

Part number 1481-01-12F 1481-01-16F 1481-01-20F 1481-01-24F 1481-01-32F

PRODUCT CATALOGUE 2009

ID mm

OD mm

Work pr. MPa

Bend rad. mm

20.0 25.8 33.0 40.1 51.7

26.8 33.1 42.2 50.2 62.9

5.0 4.0 3.5 3.0 2.5

285 325 380 430 490

Weight kg/m 0.40 0.53 0.80 1.04 1.30

97


1494 METAL HOSE, SPIRAL WRAPPED Construction Inner tube:

Stainless steel 1.4541 EN 10088-1 (AISI 321)

Wrapping:

Stainless steel 1.4301 EN 10088-1 (AISI 304)

Safety factor:

4:1

Temperature:

-200°C – +550°C

Applications/Characteristics Metal hose suitable for oils, chemicals, gases, exhaust gases, water, steam, vacuum etc. The hose can also be used as mechanical cable protection. Extra flexible

Part number 1494-01-04F 1494-01-05F 1494-01-06F 1494-01-08F 1494-01-10F 1494-01-12F 1494-01-16F

ID mm

OD mm

Work pr. MPa

Bend rad. mm

6.3 8.3 10.3 12.4 16.4 20.6 25.6

11.5 13.5 15.5 18.5 23.0 27.5 32.5

12.5 10.0 8.0 6.4 6.4 5.0 4.0

105 115 130 150 190 240 300

Weight kg/m 0.160 0.185 0.225 0.290 0.350 0.495 0.575

THE HYDROSCAND METAL HOSE PROGRAMME: TYPE OF WRAPPING

Wrap type

Max temp

Dim. area

Max pressure (BAR)

Application areas

Material

Vibration reducers, load and unload hoses, steam, aggressive fluids, chemicals, gas and exhaust gas.

Stainless steel AISI 321

800°C

10–250

75 *

Stainless steel AISI 316L

450°C

10–250

75 *

Same application areas as above, but when there are high demands of flexibility and small bend radius.

Stainless steel AISI 321

800°C

6–150

125*

Stainless steel AISI 316L

450°C

6–150

Stainless steel AISI 321

800°C

8–250

Galvanized design

400°C

8–500

Vibration reducers for exhaust gas applications with no absolute demand for total dense. * With two braids, a higher working pressure can be achieved.

98

PRODUCT CATALOGUE 2009


THE HYDROSCAND METAL HOSE PROGRAMME: ASSEMBLED FITTINGS

1:4

HYDROSCAND Special Hoses can also deliver metal hoses pre-assembled with (welded) fittings. Please contact us for further information. Fittings

PARALLEL WRAPPED METAL HOSES

Material

Solid, male thread Brass Steel Stainless steel Loose nut and cone sealing 60° Brass Steel Stainless steel

Angular, with loose nut and cone sealing 60°

Three part, female thread

Brass Steel Stainless steel

Malleable Brass Steel Stainless steel

Dim inch

ID mm

OD mm

Work pr. Bar

Bend rad. mm

3/8"

10.6

17.5

75.0

190

1/2"

12.9

20.8

70.0

210

5/8"

15.7

25.2

65.0

285

3/4"

19.8

30.3

50.0

310

1"

25.9

38.0

40.0

375

1 1/4"

33.0

45.7

35.0

405

1 1/2"

40.0

54.3

30.0

480

2"

51.6

67.5

25.0

550

2 1/2"

66.0

87.9

20.0

675

3"

76.6

100.0

18.0

750

4"

103.0

128.0

14.0

920

5"

127.5

154.5

12.5

1,160

6"

151.5

180.0

10.0

1,320

HYDROSCAND METAL HOSES Three part, male thread

Solid flange

Malleable Brass Steel Stainless steel

Hydroscand offers a wide range of solutions with different metal hoses, exhaust gas hoses as well as pressure hoses with parallel and spiral wraps.

Steel Stainless steel

Hydroscand’s metal hoses are manufactured according to customer requirements and can be delivered with certifications of pressure and seal controls.

Hydroscand’s metal hoses are suitable for transportation of gases, hot and cold fluids, and as vibration recovery in pipe lines.

Contact us for more information: Loose flange Welded ring with cripmed nut

Steel Stainless steel Aluminium

Myntgatan 1 S-591 61 Motala, Sweden Phone: +46 141 507 40 Fax: +46 141 528 80

Welded standpipe Brass Steel Stainless steel CAM-LOCK fitting Brass Stainless steel

PRODUCT CATALOGUE 2009

HYDROSCAND SPECIAL HOSES

E-mail: special.hoses@hydroscand.se

l a i c SpeHoses 99


Hydroscand’s introduction of the next generation of surface treatment The next generation of surface treatment is here! Technical development, new legislation and an increased environmental commitment sometimes go hand in hand in a very positive way. A good evidence of this was when Hydroscand during 2006 started the introduction of more environmentally friendly surface treatments. The transition is now finished to 85–90%. Many years of research and major changes within the surface treatment industry have made it possible to replace CRVI, which is a well-known carcinogenic and mutagenic substance. The development is an important step towards future EU-directives stating that CRVI in pacification and corrosion protection has to be replaced. It is very important for our suppliers’ staff that CRVI is phased out from the surface treatment process, since it affects their health. We at Hydroscand find it very gratifying to be able to contribute to a better working environment and less negative health effects. It is also gratifying to see that the technical development keeps moving forward. The understanding of how thick surfaces can be created even with CRIIIsolutions is increasing day by day. A couple of years ago it was not possible, but now salt spray tests (according to ISO 9227) on scraped details show not only that the development of the last version has made huge progress, but also that it has created an performance equally good to the previous one.

Everyone is a winner of environmentally friendly surface treatment! There is a strong environmental commitment at Hydroscand, at our customers and at our suppliers. And together we have reached this success by longterm environmental work and by helping each other. This process-transition means that Hydroscand with CRIII in our fittings will contribute to less negative health effects, a better working environment and a better global environment. Everyone is a winner with this transition! We at Hydroscand never doubted this change since it is a way for us to achieve important health and environmental gains without renouncing our requirements on safety and quality.


Hydroscand Pipes

Table of contents

Product group 610/625/519

Pipes to suit a wide spectra of materials for all sorts of applications in hydraulic and pneumatic systems. NOTE! Seamless stainless steel pipes can in some applications be replaced by welded stainless steel pipes. The customer decides in what application the seamless pipe can be replaced by a welded one. The manufacturer guarantees a weldfactor of V=1,0. In the pneumatic catalogue You can ďŹ nd information about plastic pipes.

PRODUCT CATALOGUE 2005

Pipes

1900 1902 1920 1921 1922

Steel pipe Steel pipe - Crome yellow Steel pipe - Stainless Steel pipe - Stainless steel Steel pipe - Stainless, welded

1:9

Page

94 95 96 96 96

93


PIPE

PRODUCT GROUP 610

NOTE!

1900 STEEL PIPE

Note the recomended pressure range for use of cutting rings (see pressure range cutting rings)

Equivalent to pipe line directives 1978 Material: ST 37,4 Part nr 1900-06-10 1900-06-15 1900-08-10 1900-08-15 1900-08-20 1900-10-10 1900-10-15 1900-10-20 1900-12-10 1900-12-15 1900-12-20 1900-12-25 1900-14-20 1900-14-25 1900-15-10 1900-15-15 1900-15-20 1900-16-15 1900-16-20 1900-16-25 1900-16-30 1900-18-15 1900-18-20 1900-18-25 1900-18-30 1900-20-15 1900-20-20 1900-20-25 1900-20-30 1900-20-40

OD (mm)

Thickness (mm)

PN (MPa)

Weight (Kg/m)

6 6 8 8 8 10 10 10 12 12 12 12 14 14 15 15 15 16 16 16 16 18 18 18 18 20 20 20 20 20

1,0 1,5 1,0 1,5 2,0 1,0 1,5 2,0 1,0 1,5 2,0 2,5 2,0 2,5 1,0 1,5 2,0 1,5 2,0 2,5 3,0 1,5 2,0 2,5 3,0 1,5 2,0 2,5 3,0 4,0

48,5 70,7 35,0 56,0 70,4 29,1 45,9 63,0 23,8 37,3 51,9 65,4 43,4 56,3 18,8 22,3 40,1 27,1 37,3 48,1 59,7 23,8 32,7 42,0 51,9 21,3 29,1 37,3 45,9 63,0

0,12 0,17 0,17 0,24 0,30 0,22 0,31 0,40 0,27 0,39 0,49 0,59 0,59 0,71 0,35 0,50 0,64 0,54 0,69 0,83 0,96 0,61 0,79 0,96 1,11 0,68 0,89 1,08 1,26 1,58

Part nr 1900-22-10 1900-22-15 1900-22-20 1900-22-25 1900-25-15 1900-25-20 1900-25-25 1900-25-30 1900-25-40 1900-28-15 1900-28-20 1900-28-30 1900-28-40 1900-30-20 1900-30-30 1900-30-40 1900-30-50 1900-35-20 1900-35-30 1900-35-40 1900-35-50 1900-38-30 1900-38-40 1900-38-50 1900-38-60 1900-42-20 1900-42-30 1900-50-60 1900-65-80

OD (mm)

Thickness (mm)

PN (MPa)

Weight (Kg/m)

22 22 22 22 25 25 25 25 25 28 28 28 28 30 30 30 30 35 35 35 35 38 38 38 38 42 42 50 65

1,0 1,5 2,0 2,5 1,5 2,0 2,5 3,0 4,0 1,5 2,0 3,0 4,0 2,0 3,0 4,0 5,0 2,0 3,0 4,0 5,0 3,0 4,0 5,0 6,0 2,0 3,0 6,0 8,0

12,5 19,2 26,2 33,5 16,8 22,8 29,1 35,6 49,5 14,9 20,2 31,4 43,4 18,8 29,1 40,1 51,9 15,9 24,6 33,7 43,4 22,5 30,8 39,5 48,7 13,2 20,2 35,6 36,6

0,52 0,76 0,99 1,20 0,87 1,13 1,39 1,63 2,07 0,98 1,28 1,85 2,37 1,38 2,00 2,57 3,08 1,63 2,37 3,06 3,70 2,59 3,35 4,07 4,74 1,97 2,89 6,51 11,24

Max. allowed working pressure in MPa according pipe standards 1978. NOTE! Values are based on static, smooth and resting load. For dynamic, pulsating load the values should be reduced with 30%.

94

PRODUCT CATALOGUE 2005


PRODUCT GROUP 610

PIPE

1902

Part nr 1902-06-10 1902-06-15 1902-08-10 1902-08-15 1902-10-10 1902-10-15 1902-10-20 1902-12-10 1902-12-15 1902-12-20 1902-14-20 1902-15-10 1902-15-15 1902-15-20 1902-16-20 1902-18-15 1902-18-20 1902-20-20 1902-20-25 1902-20-30

OD (mm) 6 6 8 8 10 10 10 12 12 12 14 15 15 15 16 18 18 20 20 20

STEEL PIPE YELLOW CROMATED Equivalent to pipe line directives 1978 Material: ST 37,4 Equivalent to DIN 2391/C Thickness PN Weight (mm) (MPa) (Kg/m) 1,0 1,5 1,0 1,5 1,0 1,5 2,0 1,0 1,5 2,0 2,0 1,0 1,5 2,0 2,0 1,5 2,0 2,0 2,5 3,0

48,5 70,7 35,0 56,0 29,1 45,9 63,0 23,8 37,3 51,9 43,4 18,8 22,3 40,1 37,3 23,8 32,7 29,1 37,3 45,9

0,12 0,17 0,17 0,24 0,22 0,31 0,40 0,27 0,39 0,49 0,59 0,35 0,50 0,64 0,69 0,61 0,79 0,88 1,08 1,26

1:9

NOTE! Note the recomended pressure range for use of cutting rings (see pressure range cutting rings)

Part nr 1902-22-15 1902-22-20 1902-22-25 1902-25-25 1902-25-30 1902-28-20 1902-28-25 1902-28-30 1902-30-30 1902-30-40 1902-35-20 1902-35-30 1902-38-30 1902-38-40 1902-38-50 1902-42-30 1902-50-50 1902-50-60

OD (mm)

Thickness (mm)

PN (MPa)

22 22 22 25 25 28 28 28 30 30 35 35 38 38 38 42 50 50

1,5 2,0 2,5 2,5 3,0 2,0 2,5 3,0 3,0 4,0 2,0 3,0 3,0 4,0 5,0 3,0 5,0 6,0

19,2 26,2 33,5 29,1 35,6 20,2 25,7 31,4 29,1 40,1 15,9 24,6 22,5 30,8 39,5 20,2 29,1 35,6

Weight (Kg/m) 0,76 0,99 1,20 1,39 1,63 1,28 1,57 1,85 2,00 2,57 1,63 2,37 2,99 3,35 4,07 2,89 5,55 6,51

Max. allowed working pressure in MPa according pipe standards 1978. NOTE! Values are based on static, smooth and resting load. For dynamic, pulsating load the values should be reduced with 30%.

PRODUCT CATALOGUE 2005

95


PIPES

PRODUCT GROUP 625

1920

1922

STAINLESS STEEL PIPE Equivalent to DIN 2462 Material: SS 2333 Part nr 1920-06-10 1920-08-10 1920-08-15 1920-10-10 1920-10-15 1920-10-20 1920-12-10 1920-12-15 1920-12-20 1920-15-15 1920-15-20 1920-16-15 1920-16-20 1920-18-20 1920-20-15 1920-20-20 1920-20-25 1920-22-20

OD (mm)

Thickness (mm)

PN (MPa)

Weight (Kg/m)

6 8 8 10 10 10 12 12 12 15 15 16 16 18 20 20 20 22

1,0 1,0 1,5 1,0 1,5 2,0 1,0 1,5 2,0 1,5 2,0 1,5 2,0 2,0 1,5 2,0 2,5 2,0

46,0 34,5 51,8 27,6 41,4 55,2 23,0 34,5 48,0 27,6 38,8 25,9 34,5 30,7 20,7 27,6 34,5 25,1

0,12 0,18 0,24 0,22 0,32 0,40 0,28 0,39 0,50 0,51 0,65 0,55 0,70 0,80 0,70 0,90 1,01 1,00

Part nr 1922-06-10 1922-08-10 1922-10-10 1922-12-10 1922-12-15 1922-15-15 1922-16-20 1922-20-20 1922-22-20

STAINLESS STEEL PIPE WELDED Equivalent to DIN 17455, Weld factor V=1,0 Material: SS 2333 OD Thickness PN Weight (mm) (mm) (MPa) (Kg/m) 6 8 10 12 12 15 16 20 22

1,0 1,0 1,0 1,0 1,5 1,5 2,0 2,0 2,0

0,12 0,18 0,22 0,28 0,39 0,51 0,70 0,90 1,00

1921 STEEL PIPE STAINLESS STEEL Equivalent to DIN 2462 Material: SS 2353 Part nr 1921-06-10 1921-08-10 1921-10-10 1921-12-15 1921-15-15 1921-16-20 1921-18-15 1921-22-20

OD (mm)

Thickness (mm)

PN (MPa)

Weight (Kg/m)

6 8 10 12 15 16 18 22

1,0 1,0 1,0 1,5 1,5 2,0 1,5 2,0

49,0 36,7 29,4 36,7 29,4 39,2 24,5 26,7

0,13 0,18 0,23 0,39 0,51 0,70 0,62 1,00

NOTE! Note the recommended pressure range for use of cutting rings (see pressure class cutting rings)

96

PRODUCT CATALOGUE 2005


Hydroscand Reusable Fittings

Table Of Contents

Product group 200 Ferrule

Reusable fittings are only suitable for steel braided hoses, type R1 and R2. Ferrules for both skive and non skive assemblies are avaliable. All fittings in stock have dimensions 1/4" to 1".

2000-01 2000-02 2000-03 2000-04

Page

Ferrule R1 Ferrule R2 Ferrule R1 AT Ferrule R2 AT

98 98 98 98

G-threaded fittings

Reusable fittings are recomended for hydraulic applications with moderate pressure where there is a need of assembling hose lines without equipment. Follow the assembling instructions on page 100.

2001 2002 2003 2004 2005 2006 2009

2013 2014 2016

2020 2023 2033 2034 2035 2036

2026 2027 2028

2039

2081 2082

G-threaded female flexible G-threaded male fixed G-threaded female flexible 90° G-threaded female flexible 45° G-threaded female flexible 90T G-threaded female flexible 45T G-threaded female flexible flat face

2

Page 98 98 99 99 99 99 99

J-Unified threaded fittings

Page

J-threaded female flexible J-threaded male fixed J-threaded female flexible 90°

99 100 100

M-thread fittings

Page

M-threaded male fixed for cutting ring MLM M-threaded male fixed for cutting ring MSM M-threaded female flexible DKLO M-threaded female flexible 90° DKLO M-threaded female flexible 45° DKLO M-threaded female flexible DKSO

100 100 101 101 101 101

Stand pipe

Page

Stand pipe Stand pipe 90° Stand pipe 45°

100 100 100

Cone fittings

Page

R-threaded male fixed

101

Banjo fittings

Page

G-threaded (BSP) Banjo G-threaded (BSP) Banjo bolt

101 101

Hydroscand reserves the right to modify any or all part of this catalogue without prior notice.

PRODUCT CATALOGUE 2005

97


REUSABLE FITTINGS

PRODUCT GROUP 200

2000-01

2000-04

FERRULE R1 Non skive

FERRULE R2 AT Non skive

Part nr

Used with

Hose i.d.

2000-01-04 2000-01-06 2000-01-08 2000-01-12 2000-01-16

EN1SN EN1SN EN1SN EN1SN EN1SN

1/4" 3/8" 1/2" 3/4" 1"

Part nr

2000-04-04 2000-04-06 2000-04-08 2000-04-10 2000-04-12 2000-04-16

For use with

Hose i.d.

EN2SN EN2SN EN2SN EN2SN EN2SN EN2SN

1/4" 3/8" 1/2" 5/8" 3/4" 1"

2000-02 2001

FERRULE R2 Skive Part nr

2000-02-04 2000-02-06 2000-02-08 2000-02-10 2000-02-12 2000-02-16

For use with

Hose i.d.

EN2SN EN2SN EN2SN EN2SN EN2SN EN2SN

1/4" 3/8" 1/2" 5/8" 3/4" 1"

2000-03

G FS 60째cone sealing Part nr

Thread

Type

Hose i.d.

2001-04-04 2001-06-06 2001-08-06 2001-08-08 2001-10-10

G 1/4" G 3/8" G 1/2" G 1/2" G 5/8"

FS FS FS FS FS

1/4" 3/8" 3/8" 1/2" 5/8"

2001-12-12 2001-16-12 2001-16-16

G 3/4" G 1" G 1"

FS FS FS

3/4" 3/4" # 1"

FERRULE R1AT Non skive Part nr

2000-03-04 2000-03-06 2000-03-08 2000-03-10 2000-03-12 2000-03-16

For use with

Hose i.d.

EN1SN EN1SN EN1SN EN1SN EN1SN EN1SN

1/4" 3/8" 1/2" 5/8" 3/4" 1"

2002 GM 60째cone sealing Part nr

Thread

Type

Hose i.d.

2002-04-04 2002-06-04 2002-06-06 2002-06-08 2002-08-06

G 1/4" G 3/8" G 3/8" G 3/8" G 1/2"

M M M M M

1/4" 1/4" # 3/8" 1/2" # 3/8"

2002-08-08 2002-10-10 2002-12-12 2002-16-16

G 1/2" G 5/8" G 3/4" G 1"

M M M M

1/2" 5/8" 3/4" 1"

# = In stock.

98

PRODUCT CATALOGUE 2005


PRODUCT GROUP 200

REUSABLE FITTINGS

2003

2006

G 90° 60°cone sealing

G 45T 60°cone sealing

Part nr

Thread

Type

Hose i.d.

2003-04-04 2003-06-06 2003-08-08 2003-10-10 2003-12-12 2003-16-16

G G G G G G

90° 90° 90° 90° 90° 90°

1/4" 3/8" 1/2" 5/8" 3/4" 1"

1/4" 3/8" 1/2" 5/8" 3/4" 1"

Part nr

Thread

Type

Hose i.d.

2006-04-04 2006-06-06 2006-08-08 2006-12-12 2006-16-16

G G G G G

45T 45T 45T 45T 45T

1/4" 3/8" 1/2" 3/4" 1"

1/4" 3/8" 1/2" 3/4" 1"

2

# # # # #

2009 G FS PLAN Flat face seal

2004 G 45° 60°cone sealing Part nr

Thread

Type

Hose i.d.

2004-04-04 2004-06-06 2004-08-08 2004-10-10 2004-12-12 2004-16-16

G G G G G G

45° 45° 45° 45° 45° 45°

1/4" 3/8" 1/2" 5/8" 3/4" 1"

1/4" 3/8" 1/2" 5/8" 3/4" 1"

Part nr

Thread

2009-06-06 2009-06-08 2009-08-08 2009-12-08 2009-12-12 2009-16-12

G G G G G G

FS PL FS PL FS PL FS PL FS PL FS PL

3/8" 1/2" 1/2" 1/2" 3/4" 3/4"

# # # # # #

JFS 37°cone sealing

2005 G 90T 60°cone sealing Part nr

Thread

Type

Hose i.d.

2005-04-04 2005-06-06 2005-08-08 2005-10-10 2005-12-12

G G G G G

90T 90T 90T 90T 90T

1/4" 3/8" 1/2" 5/8" 3/4"

PRODUCT CATALOGUE 2005

Hose i.d.

2013

Part nr

1/4" 3/8" 1/2" 5/8" 3/4"

3/8" 3/8" 1/2" 3/4" 3/4" 1"

Type

# # # # #

2013-07-04 2013-08-04 2013-08-06 2013-09-04 2013-09-06 2013-12-06 2013-12-08 2013-14-08 2013-14-10 2013-17-12 2013-21-16

Thread

7/16" -20 UNF 1/2" -20 UNF 1/2" -20 UNF 9/16" -18 UNF 9/16" -18 UNF 3/4" -16 UNF 3/4" -16 UNF 7/8" -14 UNF 7/8" -14 UNF 1 1/16" -12 UN 1 5/16" -12 UN

Type

Hose i.d.

JFS JFS JFS JFS JFS JFS JFS JFS JFS JFS JFS

1/4" 1/4" 3/8" # 1/4" 3/8" 3/8" 1/2" 1/2" 5/8" 3/4" 1" #

99


REUSABLE FITTINGS

Part nr

Thread

2014-09-06 9/16" -18 UNF 2014-12-06 3/4" -16 UNF 2014-12-08 3/4" -16 UNF 2014-14-08 7/8" -14 UNF 2014-17-12 1 1/16" -12 UN

PRODUCT GROUP 200

2014

2023

JM 37°cone sealing

MSM

Type

Hose i.d.

JM JM JM JM JM

3/8" 3/8" 1/2" 1/2" 3/4"

Part nr

2023-18-04 2023-20-06 2023-22-06 2023-24-08 2023-30-10

Thread

Pipe

Type

Hose i.d.

M18 x1,5 M20 x1,5 M22 x1,5 M24 x1,5 M30 x2

10mm 12mm 14mm 16mm 20mm

MSM MSM MSM MSM MSM

1/4" 3/8" 3/8" 1/2" 5/8"

# # # # #

2026 2016 J 90° 37°cone sealing Part nr

2016-07-04 2016-08-04 2016-09-04 2016-09-06 2016-12-06 2016-12-08 2016-14-08 2016-17-10 2016-17-12 2016-19-12 2016-21-12

Thread

Type

Hose i.d.

7/16" -20 UNF 1/2" -20 UNF 9/16" -18 UNF 9/16" -18 UNF 3/4" -16 UNF 3/4" -16 UNF 7/8" -14 UNF 1 1/16" -12 UN 1 1/16" -12 UN 1 3/16" -12 UN 1 5/16" -12 UN

J 90° J 90° J 90° J 90° J 90° J 90° J 90° J 90° J 90° J 90° J 90°

1/4" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 5/8" 3/4" 3/4" # 3/4" #

SP Part nr

2026-06-04 2026-08-04 2026-12-06 2026-14-06 2026-15-06 2026-15-08 2026-16-08 2026-22-10 2026-25-12

Pipe

Type

Hose i.d.

6mm 8mm 12mm 14mm 15mm 15mm 16mm 22mm 25mm

SP SP SP SP SP SP SP SP SP

1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 5/8" 3/4"

# # # # # # # # #

2027 SP 90°

2020 Part nr

MLM Part nr

2020-12-04 2020-14-04 2020-16-06 2020-18-06 2020-22-08 2020-30-12 2020-36-16

Thread

Pipe

Type

M12 x1,5 M14 x1,5 M16 x1,5 M18 x1,5 M22 x1,5 M30 x2 M36 x2

6mm 8mm 10mm 12mm 15mm 22mm 28mm

MLM MLM MLM MLM MLM MLM MLM

Hose i.d.

1/4" 1/4" 3/8" 3/8" 1/2" 3/4" 1"

# # # # # # #

2027-06-04 2027-08-04 2027-10-04 2027-10-06 2027-15-08 2027-20-10

Pipe

Type

Hose i.d.

6mm 8mm 10mm 10mm 15mm 20mm

SP 90° SP 90° SP 90° SP 90° SP 90° SP 90°

1/4" 1/4" 1/4" 3/8" 1/2" 5/8"

# # # # # #

2028 SP 45° Part nr

2028-12-06 2028-22-12

Pipe

Type

12mm 22mm

SP 45° SP 45°

Hose i.d.

3/8" # 3/4" #

# = In stock.

100

PRODUCT CATALOGUE 2005


PRODUCT GROUP 200

Part nr

2033-12-06 2033-15-08 2033-18-10

Part nr

2034-15-08

REUSABLE FITTINGS

Thread

Pipe

Type

M18 x1,5 M22 x1,5 M26 x1,5

12mm 15mm 18mm

DKLO FS DKLO FS DKLO FS

2033

2039

DKLO FS

RM

Hose i.d.

3/8" # 1/2" 5/8" #

Part nr

Thread

Type

2039-04-04

R 1/4"

M

1/4" #

2034

2081

DKLO 90째

BANJO BOLT G-threaded (BSP)

Thread

Pipe

Type

Hose i.d.

M22 x1,5

15mm

DKLO 90째

1/2" #

2

Hose i.d.

Part nr

Bult size

Type

Hose i.d.

2081-04-04 2081-06-06 2081-08-08 2081-12-12

G 1/4" G 3/8" G 1/2" G 3/4"

GB GB GB GB

1/4" 3/8" 1/2" 3/4"

# # # #

2035

Part nr

2035-15-08

DKLO 45째

2082-01

Hose i.d.

BANJO BOLT G-threaded (BSP)

Thread

Pipe

Type

M22 x1,5

15mm

DKLO 45째

1/2" #

2036 DKSO FS Part nr

2036-12-06 2036-14-06 2036-16-08

Thread

Pipe

Type

M20 x1,5 M22 x1,5 M24 x1,5

12mm 14mm 16mm

DKSO FS DKSO FS DKSO FS

PRODUCT CATALOGUE 2005

Part nr

Thread

Type

Lenght

2082-01-04 2082-01-06 2082-01-08 2082-01-12 2082-01-16

G G G G G

Bolt Bolt Bolt Bolt Bolt

L = 29,0 L = 36,0 L = 44,5 L = 51,8 L = 66,3

1/4" 3/8" 1/2" 3/4" 1"

Hose i.d.

3/8" # 3/8" # 1/2" #

101


REUSABLE FITTINGS

Assemblies of reusable fittings on a non-skived hose SAE 100 R1T and R2AT.

PRODUCT GROUP 200

ASSEMBLING INSTRUCTIONS FOR SKIVE AND NON SKIVE HOSES

1.

Cut the hose squarely to the desired length using a fine toothed hacksaw or preferably a cut-off machine, not forgetting to subtract the hose cut-off lenght 'A' ( obtained from the insert dimensions in this catalogue). Remove dirt particles from the bore of the hose. Place the mandrel in the vice and push the hose from the first notch down to the wire braiding.

2.

Slit the cover to be removed longituddinally around the diameter of the hose, then slice the unwanted cover off the wire braiding.

3.

Finish cleaning with a wire brush to remove any remaning pieces of hose cover from the wire braiding. It is importante that steps are taken to ensure that the wire braiding remains oil free.

4.

Place the ferrule in the vice. Do not lubricate either braid or internal threads of the ferrule. Screw the hose into the ferrule (anticlockwise) until the hose bottoms (on lonh assemblies place the hose in the vice without flattening).

5.

Lubricate the hose insert (the taper area only not the threads) with the appropriate fluid in the hose or a compatible lubricant.

6.

Screw the insert into the ferrule until it seats. No further tightening is neccessary.

NOTE: If a wire brushing machine is avaliable ignore steps 1-3 inclusive and proceed as follows. Set up the machine for the correct diameter hose and the correct length of cover to be removed. Brusch down the outer cover of the hose to the steel reinforcement then proceed with steps 4-6 inclusive.

102

PRODUCT CATALOGUE 2005


HYDROSCAND Cross over fittings

Cross over fittings Product group 300 Hydroscandâ&#x20AC;&#x2122;s Cross Over Fittings are suitable for both spiral and braided hoses. They are recommended for a wide range of fluids such as hydraulic oil, solvents, gases, water cleaning equipment etc.

4:2

All fittings are manufactured in one piece except for the compact bend which are soldered.

There are three types of nuts on the Hydroscand fittings, they can be recognised by the different suffixes in their part numbers: The part number has no suffix = The fitting is delivered with a crimped nut. The part number has suffix 1 = The fitting is delivered with a thrust wire nut. The part number has suffix 2 = The fitting is delivered with a slip-on nut which is kept in place with a plastic washer.

Please note that the working pressure is reduced for Deltaflex and Gammaflex5 above 1".

The following working pressures are recommended:

Hose size

WP

inch

mm

MPa

5/8"

16.0

40.0

3/4"

19.0

38.0

1"

25.0

32.0

1 1/4"

32.0

21.0

1 1/2"

38.0

18.5

2"

50.0

16.5

Working Pressure in MPa 1 MPa = 10 Bar = 145 psi

For heavy duty applications with Deltaflex or Gammaflex5 we recommend our Interlock series (4400).

A correct assembly makes a safe unit. Follow the assembling instruction.

Hydroscand reserves the right to modify any or all parts of this catalogue without any prior notice.

PRODUCT CATALOGUE 2009

111


Hydroscand Cross Over fittings

Ferrules page

product group 300

Stand pipes page

4226 4227 4228

Stand pipe straight Stand pipe 90° bend Stand pipe 45° bend

4200-07 4200-11 4200-12 4200-19 4200-20 4200-21 4200-22 4200-26 4200-27 4200-23 4200-28 4200-29 4200-30 4200-40

EN1SC Ferrules EN1SN, 2SC Ferrules EN2SN Ferrules EN4SP/4SH Ferrules EN4SH Ferrules EN1SN Ferrules EN2SN Ferrules Ferrules P.T.F.E. / Teflon smooth Ferrules R7 / R8 EN1SN, 2SC Ferrules Ferrules Thermoplastic 1-steel Ferrules Thermoplastic 2-steel Ferrules P.T.F.E. / Teflon FerrulesEN 854 R3

G-Threaded fittings page

4201 4201~1 4201~2 4311 4311~1 4209~1 4202 4239 4203 4203~1 4313~1 4205 4207 4207~1 4204 4204~1 4206~1 4204~7 4314 4314~1

G-threaded straight, Crimped nut 116 G-threaded straight, Thrust-wired nut 116 G-threaded straight, Slip-on nut 116 G-threaded straight, Crimped nut 117 G-threaded straight, Thrust-wired nut 117 G-threaded straight, Thrust-wired nut 117 G-threaded straight 117 R-threaded straight 117 G-threaded 90° bend, Crimped nut 118 G-threaded 90°bend, Thrust-wired nut 118 G-threaded 90° bend, thrust-wired nut 118 G-threaded 90° Compact bend, Crimped nut 118 G-threaded 90° forged bend, Crimped nut 118 G-threaded 90° forged bend, thrust-wired nut 118 G-threaded 45° bend, Crimped nut 119 G-threaded 45° bend, thurst-wired nut 119 G-threaded 45° compact bend, thurst-wired nut 119 G-threaded 45° short bend, thurst-wired nut 119 G-threaded 45° bend, crimped nut 119 G-threaded 45° bend, thurst-wired nut 119

4224~2 4221 4233~2 4234~2 4235~2

M-threaded M-threaded M-threaded M-threaded M-threaded

Unified-threaded fittings page

Plug-in fittings WEO page

4213~1 4213 4214 4216 4216~1 4217 4218~1 4217~1 4217~7

Unified-threaded Unified-threaded Unified-threaded Unified-threaded Unified-threaded Unified-threaded Unified-threaded Unified-threaded Unified-threaded

straight, thrust-wired nut straight, Crimped nut straight 90° bend, crimped nut 90° bend, thrust-wired nut 45° bend, crimped nut 90° compact bend 45° bend, Thrust-wired nut 45° short bend, crimped nut

114 114 114 114 114 114 114 115 115 115 115 115 115 115

Table of contents

120 120 120 120 121 121 121 121 121

Metric-threaded fittings page

4270~2 4271~2 4272~2 4220 4273~2 4274~2 4275~2 4223

M-threaded M-threaded M-threaded M-threaded M-threaded M-threaded M-threaded M-threaded

112

straight, slip-on nut 90° bend, slip-on nut 45° bend, slip-on nut straight straight, slip-on nut 90° bend, slip-on nut 45° bend, slip-on nut straight

124 124 125 125 125 125 126 126

126 127 127

Flange fittings page 4243 4244 4244~6 4248 4253 4263 4254 4258 4264 4268

SAE Flange straight SAE Flange 90° bend SAE Flange 90° short bend SAE Flange 45°bend SAE Flange straight Supercat Flange straight SAE Flange 90°bend SAE Flange 45°bend Supercat Flange 90°bend Supercat Flange 45°bend

ORFS-fittings page

4290 4290~2 4291 4291~2 4291~7 4292 4292~2 4295

Unified-threaded Unified-threaded Unified-threaded Unified-threaded Unified-threaded Unified-threaded Unified-threaded Unified-threaded

straight, crimped nut straight, slip-on nut 90° bend, crimped nut 90° bend, slip-on nut 90° short bend, slip-on nut 45° bend, crimped nut 45° bend, slip-on nut straight

122 122 122 123 123 123 123 123 123 124

128 128 129 129 129 129 129 130

French types page

3C14 3C14 3C14 3C14 3C14

710 712 714 748 749

straight, slip-on nut straight, slip-on nut straight, slip-on nut 90° bend, slip-on nut 45° bend, slip-on nut

Plug-in fitting straight Plug-in fitting 45° bend Plug-in fitting 90° bend Release ring Assembly stop

131 131 131 131 131

132 132 132 132 132

Miscellaneous fittings page

4215 4240 4241 4280 4280-01 4281-01 4282 4282-01 4276 4277 4284 4287 4231 4373 4374

Unified-threaded straight, for O-ring NPTF-threaded straight NPSM-threaded straight, crimped nut BSP Banjo Banjo Bolt for BSP Banjo Banjo Bolt, double for BSP Banjo Metric banjo Banjo Bolt for metric Banjo Sticko Hose joint M-threaded straight, crimped nut G-threaded straight, crimped nut M-threaded straight DKSO special Handle fitting

122 122 122 127 127 128 128 128 130 130 130 130 130 131 131

PRODUCT CATALOGUE 2009


Product group 300

Hydroscand Cross Over fittings

Assembly instructions

1. Cut the hose transversely. Remember that all fittings have a cut-off length "A".

4:2 2. If using a skive ferrule, the hose should be skived to the steel wire. The skiving length "L" is noted in the Swaging Manual. Be careful not to damage the steel wire when skiving. If you are using non-skived ferrules you do not need to skive the hose. Clean the hose end from dirt and particles.

C B

3. Push the ferrule onto the hose until it stops. Lubricate the insert and push it into the hose until the stop "B" meets the hose end. Thereafter, pull out the ferrule towards "C".

A 4. Swage the ferrule and the fitting according to the required swage diameter "D" (see the Swaging Manual). Use a caliper to check the swage diameter.

5. Make sure that the correct internal collapse (see the Swaging Manual) has been achieved by using the Hydroscand control pin (9015-xx-xx). The GO part should pass into the fitting to make sure the swaging is not overdone. The STOP part, on the other hand, should not be able to pass to make sure the swaging is not underdone.

PRODUCT CATALOGUE 2009

The Hydroscand control pins (9015-xx-xx) are equipped with one side applicable for braided hoses (knurled), and one side for spiral hoses (four grooves).

NOTE! It is important to use hoses and fittings that are adjusted to fit together. Our hoses and fittings have been tested for a perfect fit.

113


Hydroscand Cross Over fittings

Part number

Use with

4200-07-04 4200-07-05 4200-07-06 4200-07-08 4200-07-10 4200-07-12 4200-07-16

EN1SC EN1SC EN1SC EN1SC EN1SC EN1SC EN1SC

product group 300

4200-07

4200-19

EN1SC Ferrules

EN4SP/4SH Ferrules

Non-skive

Skive

Hose ID

Part number

Use with

Hose ID

1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1"

4200-19-04 4200-19-06 4200-19-08 4200-19-10 4200-19-12 4200-19-16 4200-19-20 4200-19-24 4200-19-32

EN4SP/Deltaflex EN4SP/Deltaflex EN4SP/Deltaflex EN4SP/Deltaflex EN4SP/4SH/Deltaflex EN4SP/4SH/Deltaflex EN4SP EN4SP EN4SP/Deltaflex

1/4" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2" 2"

4200-11

Part number

Use with

4200-11-03 4200-11-04 4200-11-05 4200-11-06 4200-11-08 4200-11-10 4200-11-12 4200-11-16 4200-11-20 4200-11-24 4200-11-32

EN1SN, EN1SN, EN1SN, EN1SN, EN1SN, EN1SN, EN1SN, EN1SN, EN1SN EN1SN EN1SN

EN1SN, 2SC Ferrules

4200-20

Non-skive

EN4SH Ferrules

2SC 2SC 2SC 2SC 2SC 2SC 2SC 2SC

Skive

Hose ID 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2" 2"

Part number

Use with

Hose ID

4200-20-20 4200-20-24 4200-20-32

EN4SH/Deltaflex EN4SH/Deltaflex EN4SH

1 1/4" 1 1/2" 2"

4200-21 EN1SN Ferrules Skive

4200-12

Part number

Use with

EN2SN Ferrules

4200-21-20 4200-21-24 4200-21-32

EN1SN EN1SN EN1SN

Non-skive Part number

Use with

4200-12-03 4200-12-04 4200-12-05 4200-12-06 4200-12-08 4200-12-10 4200-12-12 4200-12-16 4200-12-20 4200-12-24 4200-12-32

EN2SN EN2SN EN2SN EN2SN EN2SN EN2SN EN2SN EN2SN EN2SN EN2SN EN2SN

114

Hose ID 1 1/4" 1 1/2" 2"

Hose ID 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2" 2"

4200-22 EN2SN Ferrules Skive Part number

Use with

4200-22-20 4200-22-24 4200-22-32

EN2SN EN2SN EN2SN

Hose ID 1 1/4" 1 1/2" 2"

PRODUCT CATALOGUE 2009


Product group 300

Hydroscand Cross Over fittings 4200-28

4200-23

Ferrules Thermoplastic 1-steel

EN1SN, 2SC Ferrules Skive Part number

Use with

4200-23-03 4200-23-04 4200-23-05 4200-23-06 4200-23-08 4200-23-10 4200-23-12 4200-23-16

EN1SN/2SN EN1SN/2SN EN1SN/2SN EN1SN/2SN EN1SN/2SN EN1SN/2SN EN1SN/2SN EN1SN/2SN

Non-skive

Hose ID

Part number

Use with

3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1"

4200-28-03 4200-28-04 4200-28-05 4200-28-06 4200-28-08 4200-28-10 4200-28-12 4200-28-16

Thermoplastic Thermoplastic Thermoplastic Thermoplastic Thermoplastic Thermoplastic Thermoplastic Thermoplastic

Hose ID 1W 1W 1W 1W 1W / R8 1W 1W 1W

3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1"

4200-26

4200-29

Ferrules P.T.F.E. / Teflon smooth

Ferrules Thermoplastic 2-steel

Non-skive

Non-skive

Part number

Use with

4200-26-03 4200-26-04 4200-26-05 4200-26-06 4200-26-08 4200-26-10 4200-26-12 4200-26-16

P.T.F.E. P.T.F.E. P.T.F.E. P.T.F.E. P.T.F.E. P.T.F.E. P.T.F.E. P.T.F.E.

smooth smooth smooth smooth smooth smooth smooth smooth

Hose ID

Part number

Use with

Hose ID

3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1"

4200-29-04 4200-29-06 4200-29-08

Thermoplastic 2W Thermoplastic 2W Thermoplastic 2W

1/4" 3/8" 1/2"

4200-30 Ferrules P.T.F.E. / Teflon Non-skive

4200-27 Ferrules R7 / R8 Non-skive Part number

Use with

4200-27-03 4200-27-04 4200-27-05 4200-27-06 4200-27-08 4200-27-12 4200-27-16

Thermoplastic Thermoplastic Thermoplastic Thermoplastic Thermoplastic Thermoplastic Thermoplastic

Hose ID R7 R7 R7 R7 R7 R7 R7

/ / / /

R8 R8 R8 R8

3/16" 1/4" 5/16" 3/8" 1/2" 3/4" 1"

Part number

Use with

4200-30-04 4200-30-06 4200-30-08 4200-30-10 4200-30-12 4200-30-16 4200-30-20 4200-30-24 4200-30-32

P.T.F.E. P.T.F.E. P.T.F.E. P.T.F.E. P.T.F.E. P.T.F.E. P.T.F.E. P.T.F.E. P.T.F.E.

wrapped wrapped wrapped wrapped wrapped wrapped wrapped wrapped wrapped

Hose ID 1/4" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2" 2"

4200-40 Ferrules EN 854 R3 Non-skive

PRODUCT CATALOGUE 2009

Part number

Use with

4200-40-04 4200-40-06 4200-40-08 4200-40-10 4200-40-12 4200-40-16

EN EN EN EN EN EN

854 854 854 854 854 854

R3 R3 R3 R3 R3 R3

Hose ID 1/4" 3/8" 1/2" 5/8" 3/4" 1"

115

4:2


Hydroscand Cross Over fittings 4201

4201~1

G-threaded straight, Crimped nut

G-threaded straight, Thrust-wired nut

60째 cone sealing

60째 cone sealing

Part number

Thread

Type

4201-02-03 4201-02-04 4201-04-03 4201-04-04 4201-04-05 4201-04-06 4201-06-04 4201-06-05 4201-06-06 4201-06-08 4201-08-06 4201-08-08 4201-08-10 4201-08-12 4201-10-10 4201-12-08 4201-12-10 4201-12-12 4201-12-16 4201-16-12 4201-16-16 4201-20-20 4201-24-24 4201-32-32

G G G G G G G G G G G G G G G G G G G

FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS

1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 5/8" 3/4" 3/4" 3/4" 3/4" G 1" G 1" G 1 1/4" G 1 1/2" G 2"

product group 300

Hose ID 3/16" 1/4" 3/16" 1/4" 5/16" 3/8" 1/4" 5/16" 3/8" 1/2" 3/8" 1/2" 5/8" 3/4" 5/8" 1/2" 5/8" 3/4" 1" 3/4" 1" 1 1/4" 1 1/2" 2"

Part number

Thread

Type

4201-02-03-1 4201-02-04-1 4201-04-03-1 4201-04-04-1 4201-04-05-1 4201-04-06-1 4201-06-04-1 4201-06-05-1 4201-06-06-1 4201-06-08-1 4201-08-06-1 4201-08-08-1 4201-08-10-1 4201-08-12-1 4201-10-08-1 4201-10-10-1 4201-12-08-1 4201-12-10-1 4201-12-12-1 4201-12-16-1 4201-16-12-1 4201-16-16-1

G G G G G G G G G G G G G G G G G G G G

FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS

1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" 3/4" 3/4" G 1" G 1"

Hose ID 3/16" 1/4" 3/16" 1/4" 5/16" 3/8" 1/4" 5/16" 3/8" 1/2" 3/8" 1/2" 5/8" 3/4" 1/2" 5/8" 1/2" 5/8" 3/4" 1" 3/4" 1"

4201~2 G-threaded straight, Slip-on nut 60째 cone sealing

116

Part number

Thread

Type

4201-04-04-2 4201-06-06-2 4201-08-08-2

G 1/4" G 3/8" G 1/2"

FS FS FS

Hose ID 1/4" 3/8" 1/2"

PRODUCT CATALOGUE 2009


Product group 300

Hydroscand Cross Over fittings 4311

4202

G-threaded straight, Crimped nut

G-threaded straight 60째 cone sealing

60째 cone sealing with O-ring Part number

Thread

Type

4311-04-04 4311-06-06 4311-08-08 4311-10-10 4311-12-12 4311-16-16 4311-20-20 4311-24-24 4311-32-32

G G G G G

O O O O O O O O O

1/4" 3/8" 1/2" 5/8" 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

FS FS FS FS FS FS FS FS FS

Hose ID

Part number

Thread

Type

1/4" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2" 2"

4202-02-03 4202-02-04 4202-04-03 4202-04-04 4202-04-05 4202-04-06 4202-06-04 4202-06-05 4202-06-06 4202-06-08 4202-08-04 4202-08-05 4202-08-06 4202-08-08 4202-08-10 4202-08-12 4202-10-08 4202-10-10 4202-12-08 4202-12-10 4202-12-12 4202-12-16 4202-16-12 4202-16-16 4202-20-16 4202-20-20 4202-24-20 4202-24-24 4202-32-24 4202-32-32

G G G G G G G G G G G G G G G G G G G G G G

M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M

4311~1 G-threaded straight, Thrust-wired nut 60째 cone sealing with O-ring Part number 4311-16-16-1 4311-20-16-1 4311-20-20-1 4311-24-24-1 4311-32-32-1

Thread G 1" G 1 1/4" G 1 1/4" G 1 1/2" G 2"

Type O O O O O

Hose ID

FS FS FS FS FS

1" 1" 1 1/4" 1 1/2" 2"

4209~1 G-threaded straight, Thrust-wired nut

G G G G

1 1 1 1

1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" 3/4" 3/4" G 1" G 1" 1/4" 1/4" 1/2" 1/2" G 2" G 2"

Thread

Type

4209-04-04-1 4209-06-04-1 4209-06-05-1 4209-06-06-1 4209-08-05-1 4209-08-06-1 4209-08-08-1 4209-10-08-1 4209-10-10-1 4209-12-08-1 4209-12-10-1 4209-12-12-1 4209-16-12-1 4209-16-16-1 4209-20-20-1

G G G G G G G G G G G G

FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" 3/4" G 1" G 1" G 1 1/4"

PRODUCT CATALOGUE 2009

FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS

R-threaded straight

Hose ID 1/4" 1/4" 5/16" 3/8" 5/16" 3/8" 1/2" 1/2" 5/8" 1/2" 5/8" 3/4" 3/4" 1" 1 1/4"

3/16" 1/4" 3/16" 1/4" 5/16" 3/8" 1/4" 5/16" 3/8" 1/2" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1/2" 5/8" 1/2" 5/8" 3/4" 1" 3/4" 1" 1" 1 1/4" 1 1/4" 1 1/2" 1 1/2" 2"

4239

Flat face sealing Part number

Hose ID

Coned thread and 60째 cone sealing Part number

Thread

Type

4239-02-03 4239-02-04 4239-04-03 4239-04-04 4239-04-06 4239-06-04 4239-06-05 4239-06-06 4239-06-08 4239-08-06 4239-08-08 4239-12-10 4239-12-12 4239-16-16 4239-20-20 4239-24-24 4239-32-32

R R R R R R R R R R R R R

M M M M M M M M M M M M M M M M M

1/8" 1/8" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 3/4" 3/4" R 1" R 1 1/4" R 1 1/2" R 2"

Hose ID 3/16" 1/4" 3/16" 1/4" 3/8" 1/4" 5/16" 3/8" 1/2" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2" 2"

117

4:2


Hydroscand Cross Over fittings 4203

4313~1

G-threaded 90° bend, Crimped nut

G-threaded 90° bend, thrust-wired nut

60° cone sealing

60° cone sealing with O-ring

Part number

Thread

Type

4203-02-03 4203-02-04 4203-04-03 4203-04-04 4203-04-06 4203-06-04 4203-06-05 4203-06-06 4203-06-08 4203-08-06 4203-08-08 4203-10-08 4203-10-10 4203-12-08 4203-12-10 4203-12-12 4203-16-12 4203-16-16 4203-20-20 4203-24-24 4203-32-32

G G G G G G G G G G G G G G G G

90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90°

1/8" 1/8" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" 3/4" G 1" G 1" G 1 1/4" G 1 1/2" G 2"

product group 300

FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS

Hose ID 3/16" 1/4" 3/16" 1/4" 3/8" 1/4" 5/16" 3/8" 1/2" 3/8" 1/2" 1/2" 5/8" 1/2" 5/8" 3/4" 3/4" 2" 1 1/4" 1 1/2" 2"

4203~1

Part number 4313-20-20-1 4313-24-24-1 4313-32-32-1

Thread G 1 1/4" G 1 1/2" G 2"

Type

Hose ID

O 90° FS O 90° FS O 90° FS

1 1/4" 1 1/2" 2"

4205 G-threaded 90° Compact bend, Crimped nut 60° cone sealing Part number

Thread

Type

4205-02-03 4205-02-04 4205-04-04 4205-06-04 4205-06-05 4205-06-06 4205-08-08 4205-10-10 4205-12-12 4205-16-16

G G G G G G G G G

C C C C C C C C C C

1/8" 1/8" 1/4" 3/8" 3/8" 3/8" 1/2" 5/8" 3/4" G 1"

90° 90° 90° 90° 90° 90° 90° 90° 90° 90°

Hose ID FS FS FS FS FS FS FS FS FS FS

3/16" 1/4" 1/4" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1"

G-threaded 90°bend, Thrust-wired nut

4207

60° cone sealing Part number

Thread

Type

4203-02-03-1 4203-02-04-1 4203-04-03-1 4203-04-04-1 4203-04-06-1 4203-06-04-1 4203-06-06-1 4203-06-08-1 4203-08-06-1 4203-08-08-1 4203-10-08-1 4203-10-10-1 4203-12-08-1 4203-12-10-1 4203-12-12-1 4203-16-12-1 4203-16-16-1

G G G G G G G G G G G G G G G

90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90°

118

1/8" 1/8" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" 3/4" G 1" G 1"

FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS

G-threaded 90° forged bend, Crimped nut

Hose ID 3/16" 1/4" 3/16" 1/4" 3/8" 1/4" 3/8" 1/2" 3/8" 1/2" 1/2" 5/8" 1/2" 5/8" 3/4" 3/4" 1"

60° cone sealing Part number

Thread

Type

4207-04-04 4207-06-06 4207-08-08 4207-12-12

G G G G

C C C C

1/4" 3/8" 1/2" 3/4"

90° 90° 90° 90°

Hose ID FS FS FS FS

1/4" 3/8" 1/2" 3/4"

4207~1 G-threaded 90° forged bend, thrust-wired nut 60° cone sealing Part number

Thread

Type

4207-04-04-1 4207-06-06-1 4207-08-08-1 4207-12-12-1 4207-16-16-1

G G G G

C C C C C

1/4" 3/8" 1/2" 3/4" G 1"

90° 90° 90° 90° 90°

Hose ID FS FS FS FS FS

1/4" 3/8" 1/2" 3/4" 1"

PRODUCT CATALOGUE 2009


Product group 300

Hydroscand Cross Over fittings 4204

4206~1

G-threaded 45° bend, Crimped nut

G-threaded 45° compact bend, thurst-wired nut

60° cone sealing

60° cone sealing

Part number

Thread

Type

4204-02-03 4204-02-04 4204-04-04 4204-06-04 4204-06-05 4204-06-06 4204-06-08 4204-08-06 4204-08-08 4204-10-08 4204-10-10 4204-12-08 4204-12-10 4204-12-12 4204-16-12 4204-16-16 4204-20-20 4204-24-24 4204-32-32

G G G G G G G G G G G G G G

45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45°

1/8" 1/8" 1/4" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" 3/4" G 1" G 1" G 1 1/4" G 1 1/2" G 2"

FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS

Hose ID 3/16" 1/4" 1/4" 1/4" 5/16" 3/8" 1/2" 3/8" 1/2" 1/2" 5/8" 1/2" 5/8" 3/4" 3/4" 1" 1 1/4" 1 1/2" 2"

4204~1

Part number

Thread

Type

4206-04-04-1 4206-06-06-1 4206-08-06-1 4206-08-08-1 4206-10-10-1 4206-12-12-1 4206-16-16-1

G G G G G G

C C C C C C C

1/4" 3/8" 1/2" 1/2" 5/8" 3/4" G 1"

45° 45° 45° 45° 45° 45° 45°

Hose ID FS FS FS FS FS FS FS

4204~7 G-threaded 45° short bend, thurst-wired nut 60° cone sealing Part number

Thread

Type

4204-04-04-7 4204-06-06-7 4204-08-08-7 4204-12-12-7 4204-16-16-7

G G G G

45° 45° 45° 45° 45°

1/4" 3/8" 1/2" 3/4" G 1"

S S S S S

Hose ID FS FS FS FS FS

G-threaded 45° bend, thurst-wired nut

Thread

Type

4204-02-03-1 4204-02-04-1 4204-04-04-1 4204-06-04-1 4204-06-05-1 4204-06-06-1 4204-06-08-1 4204-08-06-1 4204-08-08-1 4204-10-08-1 4204-10-10-1 4204-12-08-1 4204-12-10-1 4204-12-12-1 4204-16-12-1 4204-16-16-1

G G G G G G G G G G G G G G

45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45°

1/8" 1/8" 1/4" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" 3/4" G 1" G 1"

FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS

G-threaded 45° bend, crimped nut

Hose ID 3/16" 1/4" 1/4" 1/4" 5/16" 3/8" 1/2" 3/8" 1/2" 1/2" 5/8" 1/2" 5/8" 3/4" 3/4" 1"

1/4" 3/8" 1/2" 3/4" 1"

4314

60° cone sealing Part number

1/4" 3/8" 3/8" 1/2" 5/8" 3/4" 1"

60° cone sealing with O-ring Part number

Thread

Type

4314-04-04 4314-06-06 4314-08-08 4314-12-12 4314-16-16 4314-20-20 4314-24-24 4314-32-32

G G G G

O O O O O O O O

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

45° 45° 45° 45° 45° 45° 45° 45°

Hose ID FS FS FS FS FS FS FS FS

1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"

4314~1 G-threaded 45° bend, thurst-wired nut 60° cone sealing with O-ring Part number 4314-20-20-1 4314-24-24-1 4314-32-32-1

PRODUCT CATALOGUE 2009

Thread G 1 1/4" G 1 1/2" G 2"

Type O 45° FS O 45° FS O 45° FS

Hose ID 1 1/4" 1 1/2" 2"

119

4:2


Hydroscand Cross Over fittings

product group 300

4213

4214

Unified-threaded straight, Crimped nut

Unified-threaded straight 74° cone sealing

74° cone sealing Part number

Thread

4213-07-03 4213-07-04 4213-08-04 4213-09-04 4213-09-05 4213-09-06 4213-09-08 4213-10-06 4213-12-05 4213-12-06 4213-12-08 4213-14-06 4213-14-08 4213-14-10 4213-17-08 4213-17-10 4213-17-12 4213-17-16 4213-19-12 4213-21-12 4213-21-16 4213-26-16 4213-26-20 4213-30-20 4213-30-24

7/16"–20 UNF 7/16"–20 UNF 1/2"–20 UNF 9/16"–18 UNF 9/16"–18 UNF 9/16"–18 UNF 9/16"–18 UNF 5/8"–18 UNF 3/4"–16 UNF 3/4"–16 UNF 3/4"–16 UNF 7/8"–14 UNF 7/8"–14 UNF 7/8"–14 UNF 1 1/16"–12 UN 1 1/16"–12 UN 1 1/16"–12 UN 1 1/16"–12 UN 1 3/16"–12 UN 1 5/16"–12 UN 1 5/16"–12 UN 1 5/8"–12 UN 1 5/8"–12 UN 1 7/8"–12 UN 1 7/8"–12 UN

Part number 4213-07-03-1 4213-07-04-1 4213-08-04-1 4213-08-06-1 4213-09-04-1 4213-09-05-1 4213-09-06-1 4213-09-08-1 4213-12-06-1 4213-12-08-1 4213-14-06-1 4213-14-08-1 4213-14-10-1 4213-17-08-1 4213-17-10-1 4213-17-12-1 4213-17-16-1 4213-19-12-1 4213-21-12-1 4213-21-16-1 4213-26-16-1 4213-26-20-1 4213-30-20-1 4213-30-24-1 4213-40-32-1

120

Type JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC

FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS

Hose ID

Part number

Thread

3/16" 1/4" 1/4" 1/4" 5/16" 3/8" 1/2" 3/8" 5/16" 3/8" 1/2" 3/8" 1/2" 5/8" 1/2" 5/8" 3/4" 1" 3/4" 3/4" 1" 1" 1 1/4" 1 1/4" 1 1/2"

4214-07-03 4214-07-04 4214-08-04 4214-08-06 4214-09-04 4214-09-05 4214-09-06 4214-12-05 4214-12-06 4214-12-08 4214-14-06 4214-14-08 4214-14-10 4214-14-12 4214-17-08 4214-17-10 4214-17-12 4214-17-16 4214-19-12 4214-21-12 4214-21-16 4214-26-16 4214-26-20 4214-30-24 4214-40-32

7/16"–20 UNF 7/16"–20 UNF 1/2"–20 UNF 1/2"–20 UNF 9/16"–18 UNF 9/16"–18 UNF 9-16"–18 UNF 3/4"–16 UNF 3/4"–16 UNF 3/4"–16 UNF 7/8"–14 UNF 7/8"–14 UNF 7/8"–14 UNF 7/8"–14 UNF 1 1/16"–12 UN 1 1/16"–12 UN 1 1/16"–12 UN 1 1/16"–12 UN 1 3/16"–12 UN 1 5/16"–12 UN 1 5/16"–12 UN 1 5/8"–12 UN 1 5/8"–12 UN 1 7/8"–12 UN 2 1/2"–12 UN

Type JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC

Hose ID

M M M M M M M M M M M M M M M M M M M M M M M M M

3/16" 1/4" 1/4" 3/8" 1/4" 5/16" 3/8" 5/16" 3/8" 1/2" 3/8" 1/2" 5/8" 3/4" 1/2" 5/8" 3/4" 1" 3/4" 3/4" 1" 1" 1 1/4" 1 1/2" 2"

4213~1

4216

Unified-threaded straight, thrust-wired nut

Unified-threaded 90° bend, crimped nut

74° cone sealing

74° cone sealing

Thread 7/16"–20 UNF 7/16"–20 UNF 1/2"–20 UNF 1/2"–20 UNF 9/16"–18 UNF 9/16"–18 UNF 9/16"–18 UNF 9/16"–18 UNF 3/4"–16 UNF 3/4"–16 UNF 7/8"–14 UNF 7/8"–14 UNF 7/8"–14 UNF 1 1/16"–12 UN 1 1/16"–12 UN 1 1/16"–12 UN 1 1/16"–12 UN 1 3/16"–12 UN 1 5/16"–12 UN 1 5/16"–12 UN 1 5/8"–12 UN 1 5/8"–12 UN 1 7/8"–12 UN 1 7/8"–12 UN 2 1/2"–12 UN

Type JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC

FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS

Hose ID

Part number

Thread

3/16" 1/4" 1/4" 3/8" 1/4" 5/16" 3/8" 1/2" 3/8" 1/2" 3/8" 1/2" 5/8" 1/2" 5/8" 3/4" 1" 3/4" 3/4" 1" 1" 1 1/4" 1 1/4" 1 1/2" 2"

4216-07-03 4216-07-04 4216-08-04 4216-09-04 4216-09-05 4216-09-06 4216-12-06 4216-12-08 4216-14-06 4216-14-08 4216-14-10 4216-17-08 4216-17-10 4216-17-12 4216-19-12 4216-21-12 4216-21-16 4216-26-16 4216-26-20 4216-30-24 4216-40-32

7/16"–20 UNF 7/16"–20 UNF 1/2"–20 UNF 9/16"–18 UNF 9/16"–18 UNF 9/16"–18 UNF 3/4"–16 UNF 3/4"–16 UNF 7/8"–14 UNF 7/8"–14 UNF 7/8"–14 UNF 1 1/16"–12 UN 1 1/16"–12 UN 1 1/16"–12 UN 1 3/16"–12 UN 1 5/16"–12 UN 1 5/16"–12 UN 1 5/8"–12 UN 1 5/8"–12 UN 1 7/8"–12 UN 2 1/2"–12 UN

Type JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC

90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90°

Hose ID FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS

3/16" 1/4" 1/4" 1/4" 5/16" 3/8" 3/8" 1/2" 3/8" 1/2" 5/8" 1/2" 5/8" 3/4" 3/4" 3/4" 1" 1" 1 1/4" 1 1/2" 2"

PRODUCT CATALOGUE 2009


Product group 300

Part number 4216-07-03-1 4216-07-04-1 4216-08-04-1 4216-09-04-1 4216-09-05-1 4216-09-06-1 4216-12-06-1 4216-12-08-1 4216-14-06-1 4216-14-08-1 4216-14-10-1 4216-17-08-1 4216-17-10-1 4216-17-12-1 4216-19-12-1 4216-21-12-1 4216-21-16-1 4216-26-16-1 4216-26-20-1 4216-30-24-1 4216-40-32-1

Hydroscand Cross Over fittings 4216~1

4217~1

Unified-threaded 90° bend, thrust-wired nut

Unified-threaded 45° bend, Thrust-wired nut

74° cone sealing

74° cone sealing

Thread 7/16"-20 UNF 7/16"-20 UNF 1/2"-20 UNF 9/16"-18 UNF 9/16"-18 UNF 9/16"-18 UNF 3/4"-16 UNF 3/4"-16 UNF 7/8"-14 UNF 7/8"-14 UNF 7/8"-14 UNF 1 1/16"-12 UN 1 1/16"-12 UN 1 1/16"-12 UN 1 3/16"-12 UN 1 5/16"-12 UN 1 5/16"-12 UN 1 5/8"-12 UN 1 5/8"-12 UN 1 7/8"-12 UN 2 1/2"-12 UN

Type JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC

90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90°

Hose ID FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS

3/16" 1/4" 1/4" 1/4" 5/16" 3/8" 3/8" 1/2" 3/8" 1/2" 5/8" 1/2" 5/8" 3/4" 3/4" 3/4" 1" 1" 1 1/4" 1 1/2" 2"

Part number 4217-07-04-1 4217-08-04-1 4217-09-04-1 4217-09-06-1 4217-12-06-1 4217-12-08-1 4217-14-08-1 4217-14-10-1 4217-17-08-1 4217-17-10-1 4217-17-12-1 4217-19-12-1 4217-21-12-1 4217-21-16-1 4217-26-20-1 4217-30-24-1 4217-40-32-1

Thread 7/16"-20 UNF 1/2"-20 UNF 9/16"-18 UNF 9/16"-16 UNF 3/4"-16 UNF 3/4"-16 UNF 7/8"-14 UNF 7/8"-14 UNF 1 1/16"-12 UN 1 1/16"-12 UN 1 1/16"-12 UN 1 3/16"-12 UN 1 5/16"-12 UN 1 5/16"-12 UN 1 5/8"-12 UN 1 7/8"-12 UN 2 1/2"-12 UN

Type JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC

Hose ID

45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45°

FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS

1/4" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 5/8" 1/2" 5/8" 3/4" 3/4" 3/4" 1" 1 1/4" 1 1/2" 2"

4217~7 Unified-threaded 45° short bend, crimped nut 74° cone sealing

4217 Unified-threaded 45° bend, crimped nut 74° cone sealing Part number

Thread

4217-07-04 4217-08-04 4217-09-04 4217-09-05 4217-09-06 4217-12-06 4217-12-08 4217-14-08 4217-14-10 4217-17-08 4217-17-10 4217-17-12 4217-19-12 4217-21-12 4217-21-16 4217-26-20 4217-30-20 4217-30-24 4217-40-32

7/16"-20 UNF 1/2"-20 UNF 9/16"-18 UNF 9/16"-18 UNF 9/16"-16 UNF 3/4"-16 UNF 3/4"-16 UNF 7/8"-14 UNF 7/8"-14 UNF 1 1/16"-12 UN 1 1/16"-12 UN 1 1/16"-12 UN 1 3/16"-12 UN 1 5/16"-12 UN 1 5/16"-12 UN 1 5/8"-12 UN 1 7/8"-12 UN 1 7/8"-12 UN 2 1/2"-12 UN

PRODUCT CATALOGUE 2009

Type JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC

45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45°

Hose ID FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS

1/4" 1/4" 1/4" 5/16" 3/8" 3/8" 1/2" 1/2" 5/8" 1/2" 5/8" 3/4" 3/4" 3/4" 1" 1 1/4" 1 1/4" 1 1/2" 2"

Part number 4217-07-04-7 4217-09-04-7 4217-12-06-7 4217-12-08-7 4217-14-08-7 4217-17-12-7 4217-21-16-7

Thread 7/16"-20 UNF 9/16"-18 UNF 3/4"-16 UNF 3/4"-16 UNF 7/8"-14 UNF 1 1/16"-12 UN 1 5/16"-12 UN

Type JIC JIC JIC JIC JIC JIC JIC

Hose ID

45° 45° 45° 45° 45° 45° 45°

S S S S S S S

FS FS FS FS FS FS FS

1/4" 1/4" 3/8" 1/2" 1/2" 3/4" 1"

4218~1 Unified-threaded 90° compact bend, thrust-wired nut 74° cone sealing Part number 4218-07-04-1 4218-09-06-1 4218-12-08-1 4218-14-08-1 4218-14-10-1 4218-17-12-1 4218-21-16-1

Thread 7/16"-20 UNF 9/16"-18 UNF 3/4"-16 UNF 7/8"-14 UNF 7/8"-14 UNF 1 1/16"-12 UN 1 5/16"-12 UN

Type C C C C C C C

JIC JIC JIC JIC JIC JIC JIC

Hose ID 90° 90° 90° 90° 90° 90° 90°

FS FS FS FS FS FS FS

1/4" 3/8" 1/2" 1/2" 5/8" 3/4" 1"

121

4:2


Hydroscand Cross Over fittings

4215

4243

Unified-threaded straight, for O-ring

SAE Flange straight

Part number

Thread

4215-07-04 4215-09-06 4215-12-06 4215-12-08 4215-14-08 4215-14-10 4215-17-10 4215-17-12 4215-21-12 4215-21-16

7/16"-20 UNF 9/16"-18 UNF 3/4"-16 UNF 3/4"-16 UNF 7/8"-14 UNF 7/8"-14 UNF 1 1/16"-12 UN 1 1/16"-12 UN 1 5/16"-12 UN 1 5/16"-12 UN

Type SAE-O SAE-O SAE-O SAE-O SAE-O SAE-O SAE-O SAE-O SAE-O SAE-O

M M M M M M M M M M

Part number

Flange size

Type

Hose ID

1/4" 3/8" 3/8" 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" 1"

4243-08-08 4243-08-10 4243-08-12 4243-10-10 4243-12-08 4243-12-10 4243-12-12 4243-12-16 4243-16-12 4243-16-16 4243-16-20 4243-20-16 4243-20-20 4243-24-20 4243-24-24 4243-24-32 4243-32-24 4243-32-32 4243-40-32

1/2" 1/2" 1/2" 5/8" 3/4" 3/4" 3/4" 3/4" 1" 1" 1" 1/4" 1/4" 1/2" 1/2" 1/2" 2" 2" 1/2"

SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3

1/2 5/8" 3/4" 5/8" 1/2" 5/8" 3/4" 1" 3/4" 1" 1/4" 1" 1/4" 1/4" 1/2" 2" 1/2" 2" 2"

NPTF-threaded straight Coned thread and 60° cone sealing Thread

4240-02-03 1/8"-27 NPTF 4240-02-04 1/8"-27 NPTF 4240-04-03 1/4"-18 NPTF 4240-04-04 1/4"-18 NPTF 4240-04-05 1/4"-18 NPTF 4240-04-06 1/4"-18 NPTF 4240-06-04 3/8"-18 NPTF 4240-06-05 3/8"-18 NPTF 4240-06-06 3/8"-18 NPTF 4240-06-08 3/8"-18 NPTF 4240-08-05 1/2"-14 NPTF 4240-08-06 1/2"-14 NPTF 4240-08-08 1/2"-14 NPTF 4240-08-10 1/2"-14 NPTF 4240-12-08 3/4"-14 NPTF 4240-12-10 3/4"-14 NPTF 4240-12-12 3/4"-14 NPTF 4240-12-16 3/4"-14 NPTF 4240-16-12 1"-11½ NPTF 4240-16-16 1"-11½ NPTF 4240-20-16 1 1/4"-11½ NPTF 4240-20-20 1 1/4"-11½ NPTF 4240-24-24 1 1/2"-11½ NPTF 4240-32-32 2"-11½ NPTF

Type M M M M M M M M M M M M M M M M M M M M M M M M

Code 61

Hose ID

4240

Part number

product group 300

1 1 1 1 1 2

1 1 1 1 1

Hose ID 3/16" 1/4" 3/16" 1/4" 5/16" 3/8" 1/4" 5/16" 3/8" 1/2" 5/16" 3/8" 1/2" 5/8" 1/2" 5/8" 3/4" 1" 3/4" 1" 1" 1 1/4" 1 1/2" 2"

4244 SAE Flange 90° bend Code 61 Part number

Flange size

Type

4244-08-08 4244-08-10 4244-08-12 4244-12-08 4244-12-10 4244-12-12 4244-12-16 4244-16-12 4244-16-16 4244-16-20 4244-20-16 4244-20-20 4244-20-24 4244-24-20 4244-24-24 4244-32-24 4244-32-32

1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4" 1" 1" 1" 1/4" 1/4" 1/4" 1/2" 1/2" 2" 2"

SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3

1 1 1 1 1

Hose ID 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90°

4241

SAE Flange 90° short bend Code 61

Coned thread and 60° cone sealing

4241-04-03 4241-04-04 4241-06-06 4241-08-08

122

Thread 1/4"-18 1/4"-18 3/8"-18 1/2"-14

NPSM NPSM NPSM NPSM

Type FS FS FS FS

Hose ID 3/16" 1/4" 3/8" 1/2"

1 1 1 1 1

4244~6

NPSM-threaded straight, crimped nut

Part number

1

1/2" 5/8" 3/4" 1/2" 5/8" 3/4" 1" 3/4" 1" 1/4" 1" 1/4" 1/2" 1/4" 1/2" 1/2" 2"

Part number 4244-12-12-6 4244-16-16-6 4244-20-20-6 4244-24-24-6 4244-32-32-6

Flange size

Type

3/4" 1" 1 1/4" 1 1/2" 2"

SAE3 SAE3 SAE3 SAE3 SAE3

Hose ID 90° 90° 90° 90° 90°

S S S S S

3/4" 1" 1 1/4" 1 1/2" 2"

PRODUCT CATALOGUE 2009


Product group 300

Hydroscand Cross Over fittings

4248

4254

SAE Flange 45°bend

SAE Flange 90°bend

Code 61

Code 62

Part number

Flange size

Type

4248-08-08 4248-08-10 4248-08-12 4248-12-08 4248-12-10 4248-12-12 4248-12-16 4248-16-12 4248-16-16 4248-16-20 4248-20-16 4248-20-20 4248-24-20 4248-24-24 4248-32-24 4248-32-32 4248-40-32

1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4" 1" 1" 1" 1/4" 1/4" 1/2" 1/2" 2" 2" 1/2"

SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3

1 1 1 1

2

45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45°

Hose ID

Part number

Flange size

Type

1/2" 5/8" 3/4" 1/2" 5/8" 3/4" 1" 3/4" 1" 1/4" 1" 1/4" 1/4" 1/2" 1/2" 2" 2"

4254-08-08 4254-08-10 4254-08-12 4254-12-08 4254-12-10 4254-12-12 4254-12-16 4254-16-12 4254-16-16 4254-16-20 4254-20-16 4254-20-20 4254-24-20 4254-24-24 4254-32-24 4254-32-32

1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4" 1" 1" 1" 1/4" 1/4" 1/2" 1/2" 2" 2"

SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6

1 1 1 1 1

1 1 1 1

90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90°

1 1 1 1 1

1/2" 5/8" 3/4" 1/2" 5/8" 3/4" 1" 3/4" 1" 1/4" 1" 1/4" 1/4" 1/2" 1/2" 2"

4253

4258

SAE Flange straight

SAE Flange 45°bend

Code 62

Code 62

Part number

Flange size

Type

Hose ID

Part number

Flange size

Type

4253-08-08 4253-08-10 4253-08-12 4253-12-08 4253-12-10 4253-12-12 4253-12-16 4253-16-12 4253-16-16 4253-16-20 4253-20-16 4253-20-20 4253-24-20 4253-24-24 4253-32-24 4253-32-32

1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4" 1" 1" 1" 1/4" 1/4" 1/2" 1/2" 2" 2"

SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6

1/2" 5/8" 3/4" 1/2" 5/8" 3/4" 1" 3/4" 1" 1/4" 1" 1/4" 1/4" 1/2" 1/2" 2"

4258-08-08 4258-08-10 4258-08-12 4258-12-08 4258-12-10 4258-12-12 4258-12-16 4258-16-12 4258-16-16 4258-16-20 4258-20-16 4258-20-20 4258-24-20 4258-24-24 4258-32-24 4258-32-32

1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4" 1" 1" 1" 1/4" 1/4" 1/2" 1/2" 2" 2"

SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6

1 1 1 1

Hose ID

1 1 1 1 1

1 1 1 1

Hose ID 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45°

1 1 1 1 1

1/2" 5/8" 3/4" 1/2" 5/8" 3/4" 1" 3/4" 1" 1/4" 1" 1/4" 1/4" 1/2" 1/2" 2"

4263

4264

Supercat Flange straight

Supercat Flange 90°bend

Part number

Flange size

4263-12-12 4263-16-16 4263-20-20 4263-24-24

3/4" 1" 1 1/4" 1 1/2"

PRODUCT CATALOGUE 2009

Type SC SC SC SC

Hose ID

Part number

Flange size

3/4" 1" 1 1/4" 1 1/2"

4264-12-12 4264-16-16 4264-20-20 4264-24-24

3/4" 1" 1 1/4" 1 1/2"

Type SC SC SC SC

90° 90° 90° 90°

Hose ID

3/4" 1" 1 1/4" 1 1/2"

123

4:2


Hydroscand Cross Over fittings

product group 300 4270~2

4268

M-threaded straight, slip-on nut

Supercat Flange 45°bend

24° cone sealing with O-ring Part number

Flange size

4268-12-12 4268-16-16 4268-20-20 4268-24-24

3/4" 1" 1 1/4" 1 1/2"

Type SC SC SC SC

45° 45° 45° 45°

Hose ID

3/4" 1" 1 1/4" 1 1/2"

Technical information according to SAE J518 code 61 Flange

1/2"

3/4"

1"

1 1/4"

1 1/2"

2"

WP MPa

34.5

34.5

34.5

27.6

20.7

20.7

Technical information according to SAE J518 code 62 Flange

1/2"

3/4"

1"

1 1/4"

1 1/2"

2"

WP MPa

41.4

41.4

41.4

41.4

41.4

41.4

Part number 4270-06-03-2 4270-06-04 4270-08-03-2 4270-08-04-2 4270-10-04-2 4270-10-05-2 4270-10-06 4270-12-04-2 4270-12-05-2 4270-12-06-2 4270-15-06-2 4270-15-08-2 4270-18-08-2 4270-18-10-2 4270-18-12 4270-22-10-2 4270-22-12-2 4270-28-16-2 4270-35-20-2 4270-42-24-2

Thread M M M M M M M M M M M M M M M M M M M M

12 12 14 14 16 16 16 18 18 18 22 22 26 26 26 30 30 36 45 52

x x x x x x x x x x x x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0 2.0

Pipe

Type Hose ID

6 mm 6 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm 12 mm 15 mm 15 mm 18 mm 18 mm 18 mm 22 mm 22 mm 28 mm 35 mm 42 mm

DKLO 3/16" DKLO 1/4" DKLO 3/16" DKLO 1/4" DKLO 1/4" DKLO 5/16" DKLO 3/8" DKLO 1/4" DKLO 5/16" DKLO 3/8" DKLO 3/8" DKLO 1/2" DKLO 1/2" DKLO 5/8" DKLO 3/4" DKLO 5/8" DKLO 3/4" DKLO 1" DKLO 1 1/4" DKLO 1 1/2"

Technical information Supercat Flange

1/2"

3/4"

1"

1 1/4"

1 1/2"

2"

WP MPa

41.4

41.4

41.4

41.4

41.4

41.4

4271~2 M-threaded 90° bend, slip-on nut 24° cone sealing with O-ring Part number 4271-06-03-2 4271-06-04 4271-08-03-2 4271-08-04-2 4271-10-04-2 4271-10-05-2 4271-10-06 4271-12-04-2 4271-12-05-2 4271-12-06-2 4271-15-06-2 4271-15-08-2 4271-18-08-2 4271-18-10-2 4271-18-12 4271-22-10-2 4271-22-12-2 4271-28-16-2 4271-35-20-2 4271-42-24-2

124

Thread M M M M M M M M M M M M M M M M M M M M

12 12 14 14 16 16 16 18 18 18 22 22 26 26 26 30 30 36 45 52

x x x x x x x x x x x x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0 2.0

Pipe

Type

Hose ID

6 mm 6 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm 12 mm 15 mm 15 mm 18 mm 18 mm 18 mm 22 mm 22 mm 28 mm 35 mm 42 mm

DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO

90° 3/16" 90° 1/4" 90° 3/16" 90° 1/4" 90° 1/4" 90° 5/16" 90° 3/8" 90° 1/4" 90° 5/16" 90° 3/8" 90° 3/8" 90° 1/2" 90° 1/2" 90° 5/8" 90° 3/4" 90° 5/8" 90° 3/4" 90° 1" 90° 1 1/4" 90° 1 1/2"

PRODUCT CATALOGUE 2009


Product group 300

Part number 4272-06-03-2 4272-06-04 4272-08-03-2 4272-08-04-2 4272-10-04-2 4272-10-05-2 4272-10-06 4272-12-04-2 4272-12-05-2 4272-12-06-2 4272-15-06-2 4272-15-08-2 4272-18-08-2 4272-18-10-2 4272-18-12 4272-22-10-2 4272-22-12-2 4272-28-16-2 4272-35-20-2 4272-42-24-2

Thread M M M M M M M M M M M M M M M M M M M M

12 12 14 14 16 16 16 18 18 18 22 22 26 26 26 30 30 36 45 52

x x x x x x x x x x x x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0 2.0

Hydroscand Cross Over fittings 4272~2

4273~2

M-threaded 45° bend, slip-on nut

M-threaded straight, slip-on nut

24° cone sealing with O-ring

24° cone sealing with O-ring

Pipe

Type

Hose ID

6 mm 6 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm 12 mm 15 mm 15 mm 18 mm 18 mm 18 mm 22 mm 22 mm 28 mm 35 mm 42 mm

DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO

45° 3/16" 45° 1/4" 45° 3/16" 45° 1/4" 45° 1/4" 45° 5/16" 45° 3/8" 45° 1/4" 45° 5/16" 45° 3/8" 45° 3/8" 45° 1/2" 45° 1/2" 45° 5/8" 45° 3/4" 45° 5/8" 45° 3/4" 45° 1" 45° 1 1/4" 45° 1 1/2"

Part number 4273-06-03-2 4273-06-04 4273-08-03-2 4273-08-04-2 4273-10-04-2 4273-10-05-2 4273-10-06 4273-12-04-2 4273-12-05-2 4273-12-06-2 4273-14-06-2 4273-14-08-2 4273-16-08-2 4273-20-10-2 4273-20-12-2 4273-25-12-2 4273-25-16-2 4273-30-16-2 4273-30-20-2 4273-38-20-2 4273-38-24-2

Thread M M M M M M M M M M M M M M M M M M M M M

14 14 16 16 18 18 18 20 20 20 22 22 24 30 30 36 36 42 42 52 52

x x x x x x x x x x x x x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0

24° cone sealing

4220-12-03 4220-12-04 4220-14-03 4220-14-04 4220-16-04 4220-16-05 4220-16-06 4220-18-04 4220-18-05 4220-18-06 4220-22-06 4220-22-08 4220-26-08 4220-26-10 4220-26-12 4220-30-10 4220-30-12 4220-36-16 4220-45-20 4220-52-24

M M M M M M M M M M M M M M M M M M M M

12 12 14 14 16 16 16 18 18 18 22 22 26 26 26 30 30 36 45 52

x x x x x x x x x x x x x x x x x x x x

1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 2,0 2,0 2,0 2,0 2,0

PRODUCT CATALOGUE 2009

Pipe

Type

6 mm 6 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm 12 mm 15 mm 15 mm 18 mm 18 mm 18 mm 22 mm 22 mm 28 mm 35 mm 42 mm

SKL SKL SKL SKL SKL SKL SKL SKL SKL SKL SKL SKL SKL SKL SKL SKL SKL SKL SKL SKL

Hose ID 3/16" 1/4" 3/16" 1/4" 1/4" 5/16" 3/8" 1/4" 5/16" 3/8" 3/8" 1/2" 1/2" 5/8" 3/4" 5/8" 3/4" 1" 1 1/4" 1 1/2"

Hose ID

6 mm 6 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm 12 mm 14 mm 14 mm 16 mm 20 mm 20 mm 25 mm 25 mm 30 mm 30 mm 38 mm 38 mm

DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO

3/16" 1/4" 3/16" 1/4" 1/4" 5/16" 3/8" 1/4" 5/16" 3/8" 3/8" 1/2" 1/2" 5/8" 3/4" 3/4" 1" 1" 1 1/4" 1 1/4" 1 1/2"

M-threaded 90° bend, slip-on nut

M-threaded straight

Thread

Type

4274~2

4220

Part number

Pipe

24° cone sealing with O-ring Part number 4274-06-03-2 4274-06-04 4274-08-03-2 4274-08-04-2 4274-10-04-2 4274-10-05-2 4274-10-06 4274-12-04-2 4274-12-05-2 4274-12-06-2 4274-14-06-2 4274-14-08-2 4274-16-08-2 4274-20-10-2 4274-20-12-2 4274-25-12-2 4274-25-16-2 4274-30-16-2 4274-30-20-2 4274-38-20-2 4274-38-24-2

Thread M M M M M M M M M M M M M M M M M M M M M

14 14 16 16 18 18 18 20 20 20 22 22 24 30 30 36 36 42 42 52 52

x x x x x x x x x x x x x x x x x x x x x

1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 2,0 2,0 2,0 2,0 2,0 2,0 2,0 2,0

Pipe

Type

Hose ID

6 mm 6 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm 12 mm 14 mm 14 mm 16 mm 20 mm 20 mm 25 mm 25 mm 30 mm 30 mm 38 mm 38 mm

DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO

90° 3/16" 90° 1/4" 90° 3/16" 90° 1/4" 90° 1/4" 90° 5/16" 90° 3/8" 90° 1/4" 90° 5/16" 90° 3/8" 90° 3/8" 90° 1/2" 90° 1/2" 90° 5/8" 90° 3/4" 90° 3/4" 90° 1" 90° 1" 90° 1 1/4" 90° 1 1/4" 90° 1 1/2"

125

4:2


Hydroscand Cross Over fittings

product group 300

4275~2

4226

M-threaded 45° bend, slip-on nut

Stand pipe straight

24° cone sealing with O-ring Part number 4275-06-03-2 4275-06-04 4275-08-03-2 4275-08-04-2 4275-10-04-2 4275-10-05-2 4275-10-06 4275-12-04-2 4275-12-05-2 4275-12-06-2 4275-14-06-2 4275-14-08-2 4275-16-08-2 4275-20-10-2 4275-20-12-2 4275-25-12-2 4275-25-16-2 4275-30-16-2 4275-30-20-2 4275-38-20-2 4275-38-24-2

Thread M M M M M M M M M M M M M M M M M M M M M

14 14 16 16 18 18 18 20 20 20 22 22 24 30 30 36 36 42 42 52 52

x x x x x x x x x x x x x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0

Pipe

Type

Hose ID

Part number

6 mm 6 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm 12 mm 14 mm 14 mm 16 mm 20 mm 20 mm 25 mm 25 mm 30 mm 30 mm 38 mm 38 mm

DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO

45° 3/16" 45° 1/4" 45° 3/16" 45° 1/4" 45° 1/4" 45° 5/16" 45° 3/8" 45° 1/4" 45° 5/16" 45° 3/8" 45° 3/8" 45° 1/2" 45° 1/2" 45° 5/8" 45° 3/4" 45° 3/4" 45° 1" 45° 1" 45° 1 1/4" 45° 1 1/4" 45° 1 1/2"

4226-06-03 4226-06-04 4226-08-03 4226-08-04 4226-10-04 4226-10-05 4226-10-06 4226-12-04 4226-12-05 4226-12-06 4226-14-06 4226-14-08 4226-15-06 4226-15-08 4226-16-08 4226-18-08 4226-18-10 4226-18-12 4226-20-10 4226-22-10 4226-20-12 4226-22-12 4226-25-12 4226-25-16 4226-28-16 4226-30-16 4226-30-20 4226-35-20 4226-38-20 4226-38-24 4226-42-24

4223 M-threaded straight 24° cone sealing Part number 4223-14-03 4223-14-04 4223-16-03 4223-16-04 4223-18-04 4223-18-05 4223-18-06 4223-20-04 4223-20-05 4223-20-06 4223-22-06 4223-22-08 4223-24-08 4223-30-10 4223-30-12 4223-36-12 4223-36-16 4223-42-16 4223-42-20 4223-52-20 4223-52-24

126

Thread M M M M M M M M M M M M M M M M M M M M M

14 14 16 16 18 18 18 20 20 20 22 22 24 30 30 36 36 42 42 52 52

x x x x x x x x x x x x x x x x x x x x x

1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 2,0 2,0 2,0 2,0 2,0 2,0 2,0 2,0

Pipe

Type

Hose ID

6 mm 6 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm 12 mm 14 mm 14 mm 16 mm 20 mm 20 mm 25 mm 25 mm 30 mm 30 mm 38 mm 38 mm

SKS SKS SKS SKS SKS SKS SKS SKS SKS SKS SKS SKS SKS SKS SKS SKS SKS SKS SKS SKS SKS

3/16" 1/4" 3/16" 1/4" 1/4" 5/16" 3/8" 1/4" 5/16" 3/8" 3/8" 1/2" 1/2" 5/8" 3/4" 3/4" 1" 1" 1 1/4" 1 1/4" 1 1/2"

Pipe Ø 6 6 8 8 10 10 10 12 12 12 14 14 15 15 16 18 18 18 20 22 20 22 25 25 28 30 30 35 38 38 42

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Type SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP

Hose ID 3/16" 1/4" 3/16" 1/4" 1/4" 5/16" 3/8" 1/4" 5/16" 3/8" 3/8" 1/2" 3/8" 1/2" 1/2" 1/2" 5/8" 3/4" 5/8" 5/8" 3/4" 3/4" 3/4" 1" 1" 1" 1 1/4" 1 1/4" 1 1/4" 1 1/2" 1 1/2"

PRODUCT CATALOGUE 2009


Product group 300

Part number 4227-06-03 4227-06-04 4227-08-03 4227-08-04 4227-10-04 4227-10-05 4227-10-06 4227-12-04 4227-12-05 4227-12-06 4227-14-06 4227-14-08 4227-15-06 4227-15-08 4227-16-08 4227-18-08 4227-18-10 4227-18-12 4227-20-10 4227-20-12 4227-22-10 4227-22-12 4227-25-12 4227-25-16 4227-28-16 4227-30-16 4227-30-20 4227-35-20 4227-38-20 4227-38-24 4227-42-24

Pipe Ø 6 6 8 8 10 10 10 12 12 12 14 14 15 15 16 18 18 18 20 20 22 22 25 25 28 30 30 35 38 38 42

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Hydroscand Cross Over fittings

4227

4228

Stand pipe 90° bend

Stand pipe 45° bend

Type SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP

90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90°

Hose ID

Part number

3/16" 1/4" 3/16" 1/4" 1/4" 5/16" 3/8" 1/4" 5/16" 3/8" 3/8" 1/2" 3/8" 1/2" 1/2" 1/2" 5/8" 3/4" 5/8" 3/4" 5/8" 3/4" 3/4" 1" 1" 1" 1 1/4" 1 1/4" 1 1/4" 1 1/2" 1 1/2"

4228-06-03 4228-06-04 4228-08-03 4228-08-04 4228-10-04 4228-10-05 4228-10-06 4228-12-04 4228-12-05 4228-12-06 4228-14-06 4228-14-08 4228-15-06 4228-15-08 4228-16-08 4228-18-08 4228-18-10 4228-18-12 4228-20-10 4228-20-12 4228-22-10 4228-22-12 4228-25-12 4228-25-16 4228-28-16 4228-30-16 4228-30-20 4228-35-20 4228-38-20 4228-38-24 4228-42-24

Pipe Ø 6 6 8 8 10 10 10 12 12 12 14 14 15 15 16 18 18 18 20 20 22 22 25 25 28 30 30 35 38 38 42

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Type SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP

45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45°

Hose ID

3/16" 1/4" 3/16" 1/4" 1/4" 5/16" 3/8" 1/4" 5/16" 3/8" 3/8" 1/2" 3/8" 1/2" 1/2" 1/2" 5/8" 3/4" 5/8" 3/4" 5/8" 3/4" 3/4" 1" 1" 1" 1 1/4" 1 1/4" 1 1/4" 1 1/2" 1 1/2"

4280 BSP Banjo

Part number Bolt thread

Type Hose ID

4280-02-03 4280-02-04 4280-04-03 4280-04-04 4280-04-05 4280-04-06 4280-06-04 4280-06-05 4280-06-06 4280-06-08 4280-08-04 4280-08-06 4280-08-08 4280-10-08 4280-10-10 4280-12-08 4280-12-10 4280-12-12 4280-16-16

Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo

G G G G G G G G G G G G G G G G G G

1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" 3/4" G 1"

PRODUCT CATALOGUE 2009

3/16" 1/4" 3/16" 1/4" 5/16" 3/8" 1/4" 5/16" 3/8" 1/2" 1/4" 3/8" 1/2" 1/2" 5/8" 1/2" 5/8" 3/4" 1"

Height 10.0 10.0 14.5 14.5 14.5 14.5 17.0 17.0 17.0 17.0 23.5 22.0 22.0 25.0 25.0 30.0 30.0 29.0 38.0

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

4280-01 Banjo Bolt for BSP Banjo

Part number

Thread

Type

4280-01-02 4280-01-04 4280-01-06 4280-01-08 4280-01-10 4280-01-12 4280-01-16

G G G G G G

Banjo Banjo Banjo Banjo Banjo Banjo Banjo

1/8" 1/4" 3/8" 1/2" 5/8" 3/4" G 1"

Length bolt bolt bolt bolt bolt bolt bolt

19 29 33 38 44 47 58

mm mm mm mm mm mm mm

127

4:2


Hydroscand Cross Over fittings

product group 300 4290

4281-01 Banjo Bolt, double for BSP Banjo

Unified-threaded straight, crimped nut * Double-hexagonal

ORFS sealing

Part number Thread

Type

Length

Part number

4281-01-04 4281-01-06 4281-01-08

Banjo bolt, double Banjo bolt, double Banjo bolt, double

43 mm 49 mm 64 mm

4290-04-04* 9/16"-18 UNF 4290-04-06 9/16"-18 UNF 4290-06-04 11/16"-16 UN 4290-06-06* 11/16"-16 UN 4290-08-06 13/16"-16 UN 4290-08-08* 13/16"-16 UN 4290-10-08 1"-14 UNS 4290-10-10* 1"-14 UNS 4290-12-08 1 3/16"-12 UN 4290-12-12* 1 3/16"-12 UN 4290-16-12 1 7/16"-12 UN 4290-16-16* 1 7/16"-12 UN 4290-20-20 1 11/16"-12 UN 4290-24-24 2"-12 UN

G 1/4" G 3/8" G 1/2"

4282 Metric banjo

Part number Bolt thread

Type Hose ID

4282-10-04 4282-12-03 4282-12-04 4282-12-05 4282-14-03 4282-14-04 4282-14-05 4282-14-06 4282-16-04 4282-16-05 4282-16-06 4282-18-04 4282-18-05 4282-18-06 4282-18-08 4282-20-06 4282-20-08 4282-22-06 4282-22-08 4282-22-10 4282-26-12 4282-30-12 4282-30-16

Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo

M M M M M M M M M M M M M M M M M M M M M M

M 10 x 1 12 x 1.5 12 x 1.5 12 x 1.5 14 x 1.5 14 x 1.5 14 x 1.5 14 x 1.5 16 x 1.5 16 x 1.5 16 x 1.5 18 x 1.5 18 x 1.5 18 x 1.5 18 x 1.5 20 x 1.5 20 x 1.5 22 x 1.5 22 x 1.5 22 x 1.5 26 x 1.5 30 x 1.5 30 x 1.5

1/4" 3/16" 1/4" 5/16" 3/16" 1/4" 5/16" 3/8" 1/4" 5/16" 3/8" 1/4" 5/16" 3/8" 1/2" 3/8" 1/2" 3/8" 1/2" 5/8" 3/4" 3/4" 1"

Height 10.0 12.0 12.0 12.0 14.0 14.0 14.0 14.0 16.5 16.5 16.5 20.5 20.5 20.5 20.5 23.5 23.5 23.5 23.5 23.5 30.0 36.0 36.0

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

4282-01

Thread Type ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

Hose ID FS FS FS FS FS FS FS FS FS FS FS FS FS FS

1/4" 3/8" 1/4" 3/8" 3/8" 1/2" 1/2" 5/8" 1/2" 3/4" 3/4" 1" 1 1/4" 1 1/2"

4290~2 Unified-threaded straight, slip-on nut ORFS sealing Part number

Thread Type

4290-04-04-2 9/16"-18 UNF 4290-06-04-2 11/16"-16 UN 4290-06-05-2 11/16"-16 UN 4290-06-06-2 11/16"-16 UN 4290-08-06-2 13/16"-16 UN 4290-08-08-2 13/16"-16 UN 4290-10-08-2 1"-14 UNS 4290-10-10-2 1"-14 UNS 4290-12-08-2 1 3/16"-12 UN 4290-12-10-2 1 3/16"-12 UN 4290-12-12-2 1 3/16"-12 UN 4290-16-12-2 1 7/16"-12 UN 4290-16-16-2 1 7/16"-12 UN 4290-20-20-2 1 11/16"-12 UN 4290-24-24-2 2"-12 UN

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

Hose ID FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS

1/4" 1/4" 5/16" 3/8" 3/8" 1/2" 1/2" 5/8" 1/2" 5/8" 3/4" 3/4" 1" 1 1/4" 1 1/2"

Banjo Bolt for metric Banjo Part number

Thread

Type

4282-01-10 M 10x1.0 4282-01-12 M 12x1.5 4282-01-14 M 14x1.5 4282-01-16 M 16x1.5 4282-01-18 M 18x1.5 4282-01-20 M 20x1.5 4282-01-22 M 22x1.5 4282-01-26 M 26x1.5 4282-01-30 M 30x1.5

Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo

128

Length bolt bolt bolt bolt bolt bolt bolt bolt bolt

19.3 25.7 28.5 33.0 36.5 39.5 38.3 47.0 58.0

mm mm mm mm mm mm mm mm mm

PRODUCT CATALOGUE 2009


Product group 300

Part number 4291-04-04 4291-06-06 4291-06-08 4291-08-08 4291-10-08 4291-10-10 4291-12-12 4291-16-16 4291-20-20 4291-24-24

Part number

Hydroscand Cross Over fittings 4291

4292

Unified-threaded 90° bend, crimped nut

Unified-threaded 45° bend, crimped nut

ORFS sealing

ORFS sealing

Thread Type 9/16"-18 UNF 11/16"-16 UN 11/16"-16 UN 13/16"-16 UN 1"-14 UNS 1"-14 UNS 1 3/16"-12 UN 1 7/16"-12 UN 1 11/16"-12 UN 2"-12 UN

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

90° 90° 90° 90° 90° 90° 90° 90° 90° 90°

Hose ID

Part number

FS 1/4" FS 3/8" FS 1/2" FS 1/2" FS 1/2" FS 5/8" FS 3/4" FS 1" FS 1 1/4" FS 1 1/2"

4292-04-04 4292-06-04 4292-06-06 4292-08-08 4292-10-10 4292-12-12 4292-16-12 4292-16-16 4292-20-20 4292-24-24

Thread Type 9/16"-18 UNF 11/16"-16 UN 11/16"-16 UN 13/16"-16 UN 1"-14 UNS 1 3/16"-12 UN 1 7/16"-12 UN 1 7/16"-12 UN 1 11/16"-12 UN 2"-12 UN

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

Hose ID 45° 45° 45° 45° 45° 45° 45° 45° 45° 45°

FS 1/4" FS 1/4" FS 3/8" FS 1/2" FS 5/8" FS 3/4" FS 3/4" FS 1" FS 1 1/4" FS 1 1/2"

4291~2

4292~2

Unified-threaded 90° bend, slip-on nut

Unified-threaded 45° bend, slip-on nut

ORFS sealing

ORFS sealing

Thread Type

4291-04-04-2 9/16"-18 UNF 4291-06-04-2 11/16"-16 UN 4291-06-05-2 11/16"-16 UN 4291-06-06-2 11/16"-16 UN 4291-08-06-2 13/16"-16 UN 4291-08-08-2 13/16"-16 UN 4291-10-08-2 1"-14 UNS 4291-10-10-2 1"-14 UNS 4291-12-08-2 1 3/16"-12 UN 4291-12-10-2 1 3/16"-12 UN 4291-12-12-2 1 3/16"-12 UN 4291-16-12-2 1 7/16"-12 UN 4291-16-16-2 1 7/16"-12 UN 4291-20-20-2 1 11/16"-12 UN 4291-24-24-2 2"-12 UN

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

Hose ID 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90°

FS 1/4" FS 1/4" FS 5/16" FS 3/8" FS 3/8" FS 1/2" FS 1/2" FS 5/8" FS 1/2" FS 5/8" FS 3/4" FS 3/4" FS 1" FS 1 1/4" FS 1 1/2"

Part number

Thread Type

4292-04-04-2 9/16"-18 UNF 4292-06-04-2 11/16"-16 UN 4292-06-05-2 11/16"-16 UN 4292-06-06-2 11/16"-16 UN 4292-08-06-2 13/16"-16 UN 4292-08-08-2 13/16"-16 UN 4292-10-08-2 1"-14 UNS 4292-10-10-2 1"-14 UNS 4292-12-08-2 1 3/16"-12 UN 4292-12-10-2 1 3/16"-12 UN 4292-12-12-2 1 3/16"-12 UN 4292-16-12-2 1 7/16"-12 UN 4292-16-16-2 1 7/16"-12 UN 4292-20-20-2 1 11/16"-12 UN 4292-24-24-2 2"-12 UN

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

Hose ID 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45°

FS 1/4" FS 1/4" FS 5/16" FS 3/8" FS 3/8" FS 1/2" FS 1/2" FS 5/8" FS 1/2" FS 5/8" FS 3/4" FS 3/4" FS 1" FS 1 1/4" FS 1 1/2"

4291~7 Unified-threaded 90° short bend, slip-on nut ISO 12151-1 – ORFS sealing Part number

Thread Type

4291-04-04-7 9/16"-18 UNF 4291-06-06-7 11/16"-16 UN 4291-08-04-7 13/16"-16 UN 4291-08-08-7 13/16"-16 UN 4291-10-10-7 1"-14 UNS 4291-12-12-7 1 3/16"-12 UN 4291-16-16-7 1 7/16"-12 UN

PRODUCT CATALOGUE 2009

ORFS ORFS ORFS ORFS ORFS ORFS ORFS

Hose ID 90° 90° 90° 90° 90° 90° 90°

S S S S S S S

FS FS FS FS FS FS FS

1/4" 3/8" 1/4" 1/2" 5/8" 3/4" 1"

129

4:2


Hydroscand Cross Over fittings

Part number 4295-04-04 4295-06-04 4295-06-05 4295-06-06 4295-08-06 4295-08-08 4295-10-06 4295-10-08 4295-10-10 4295-12-08 4295-12-10 4295-12-12 4295-16-12 4295-16-16 4295-20-20 4295-24-24

4295

4284

Unified-threaded straight

M-threaded straight, crimped nut

ORFS sealing

Japanese standard “Komatsu" 60°cone

Thread Type 9/16"-18 UNF 11/16"-16 UN 11/16"-16 UN 11/16"-16 UN 13/16"-16 UN 13/16"-16 UN 1"-14 UNS 1"-14 UNS 1"-14 UNS 1 3/16"-12 UN 1 3/16"-12 UN 1 3/16"-12 UN 1 7/16"-12 UN 1 7/16"-12 UN 1 11/16"-12 UN 2"-12 UN

product group 300

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

M M M M M M M M M M M M M M M M

Hose ID

Part number

1/4" 1/4" 5/16" 3/8" 3/8" 1/2" 3/8" 1/2" 5/8" 1/2" 5/8" 3/4" 3/4" 1" 1 1/4" 1 1/2"

4284-14-04 4284-14-06 4284-16-05 4284-16-06 4284-18-06 4284-22-08 4284-24-08 4284-24-10 4284-30-12 4284-33-16 4284-36-20 4284-42-24

Thread M M M M M M M M M M M M

14 14 16 16 18 22 24 24 30 33 36 42

x x x x x x x x x x x x

Type

1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5

JIS JIS JIS JIS JIS JIS JIS JIS JIS JIS JIS JIS

Hose ID

FS FS FS FS FS FS FS FS FS FS FS FS

1/4" 3/8" 5/16" 3/8" 3/8" 1/2" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2"

4287

4276

G-threaded straight, crimped nut

Sticko

Japanese standard “Toyota" 60°cone Part number 4276-04-04 4276-06-06 4276-08-08 4276-12-12 4276-16-16 4276-20-20

Type 1/4" 3/8" 1/2" 3/4" 1" 1 1/4"

Sticko Sticko Sticko Sticko Sticko Sticko

Hose ID

Part number

Thread

Type

1/4" 3/8" 1/2" 3/4" 1" 1 1/4"

4287-04-04 4287-06-06 4287-08-08 4287-12-12 4287-16-16 4287-20-20 4287-24-24

G G G G

JIS JIS JIS JIS JIS JIS JIS

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

Type

4277-04-04 4277-05-05 4277-06-06 4277-08-08

1/4" 5/16" 3/8" 1/2"

Hose Hose Hose Hose

130

joint joint joint joint

1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2"

M-threaded straight

Hose joint

Hose ID

FS FS FS FS FS FS FS

4231

4277

Part number

Hose ID

Kobelco 24° cone, connection for mm-pipes

Hose ID

Part number

1/4" 5/16" 3/8" 1/2"

4231-30-10 4231-36-12 4231-36-16 4231-45-16

Thread M M M M

30 36 36 45

x x x x

1.5 1.5 1.5 1.5

Pipe

Type

22 28 28 35

Kobelco Kobelco Kobelco Kobelco

mm mm mm mm

Hose ID 5/8" 3/4" 1" 1"

PRODUCT CATALOGUE 2009


Product group 300

Hydroscand Cross Over fittings 4233~2

4373

M-threaded straight, slip-on nut

DKSO special High pressure washer Part number

Thread

4373-14-04 4373-14-05 4373-14-06

M 22 x 1.5 M 22 x 1.5 M 22 x 1.5

Type

Hose ID

HPW FS HPW FS HPW FS

1/4" 5/16" 3/8"

4374 Handle fitting

Multiseal Part number 4233-06-03-2 4233-08-04-2 4233-10-04-2 4233-10-05-2 4233-12-05-2 4233-12-06-2 4233-15-06-2 4233-15-08-2 4233-18-10-2

Thread Pipe M M M M M M M M M

12 14 16 16 18 18 22 22 26

x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5

6 8 10 10 12 12 15 15 18

mm mm mm mm mm mm mm mm mm

Type MS MS MS MS MS MS MS MS MS

Hose ID

FS FS FS FS FS FS FS FS FS

3/16" 1/4" 1/4" 5/16" 5/16" 3/8" 3/8" 1/2" 5/8"

High pressure washer Part number

Type

Hose ID

4374-00-04 4374-00-05

HPW M HPW M

1/4" 5/16"

4234~2 4221

M-threaded 90° bend, slip-on nut

M-threaded straight, slip-on nut

Multiseal

“French type" 24° cone, connection for inch-pipes Part number 4221-20-06 4221-30-10 4221-30-12 4221-36-12 4221-45-16

Thread M M M M M

20 30 30 36 45

x x x x x

1.5 1.5 1.5 1.5 1.5

Pipe 13.25 21.25 21.25 21.25 33.70

Type Hose ID mm mm mm mm mm

M M M M M

3/8" 5/8" 3/4" 3/4" 1"

Part number 4234-08-04-2 4234-10-04-2 4234-10-05-2 4234-12-06-2 4234-15-06-2 4234-15-08-2 4234-18-10-2

Thread Pipe M M M M M M M

14 16 16 18 22 22 26

x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 1.5

8 10 10 12 15 15 18

mm mm mm mm mm mm mm

Type

Hose ID

MS MS MS MS MS MS MS

FS 1/4" FS 1/4" FS 5/16" FS 3/8" FS 3/8" FS 1/2" FS 5/8"

90° 90° 90° 90° 90° 90° 90°

4224~2

4235~2

M-threaded straight, slip-on nut

M-threaded 45° bend, slip-on nut

“French type" 24° cone, connection for inch-pipes

Multiseal

Part number 4224-20-06-2 4224-24-08-2 4224-30-12-2 4224-36-12-2 4224-45-16-2

Thread Pipe M M M M M

20 24 30 36 45

x x x x x

1.5 1.5 1.5 1.5 1.5

PRODUCT CATALOGUE 2009

13.25 16.75 21.25 21.25 33.70

mm mm mm mm mm

Type Hose ID

Part number

FS FS FS FS FS

4235-08-04-2 4235-10-04-2 4235-10-05-2 4235-12-06-2 4235-15-08-2

3/8" 1/2" 3/4" 3/4" 1"

Thread Pipe M M M M M

14 16 16 18 22

x x x x x

1.5 1.5 1.5 1.5 1.5

8 10 10 12 15

mm mm mm mm mm

Type

Hose ID

MS MS MS MS MS

FS 1/4" FS 1/4" FS 5/16" FS 3/8" FS 1/2"

45° 45° 45° 45° 45°

131

4:2


Hydroscand Cross Over fittings

product group 300

3C14 710

3C14 748

Plug-in fitting straight

Release ring

1SN/2SN hose Part number

Description

3C147100404 3C147100604 3C147100605 3C147100606 3C147100806 3C147100808 3C147101208 3C147101210 3C147101212 3C147101616 3C147111212 3C147111616

1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 3/4" 3/4" 3/4" 1" 3/4" 1"

Plug-in Plug-in Plug-in Plug-in Plug-in Plug-in Plug-in Plug-in Plug-in Plug-in

Hose ID Straight Straight Straight Straight Straight Straight Straight Straight Straight Straight

1/4" 1/4" 5/16" 3/8" 3/8" 1/2" 1/2" 5/8" 3/4" 1" Plug-in Straight, R9R-hose 3/4" Plug-in Straight, R9R-hose 1"

Part number

Description

3C147480400 3C147480600 3C147480800 3C147481200 3C147481600

1/4" 3/8" 1/2" 3/4" 1"

Release Release Release Release Release

No./Package ring ring ring ring ring

10 10 10 10 10

3C14 749 Assembly stop

3C14 712 Plug-in fitting 45° bend 1SN/2SN hose Part number

Description

3C147120404 3C147120604 3C147120605 3C147120606 3C147120806 3C147120808 3C147121208 3C147121210 3C147121212 3C147131212

1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4"

Plug-in Plug-in Plug-in Plug-in Plug-in Plug-in Plug-in Plug-in Plug-in Plug-in

Hose ID

Part number

Description

3C147490400 3C147490600 3C147490800 3C147491200 3C147491600

1/4" 3/8" 1/2" 3/4" 1"

Assembly Assembly Assembly Assembly Assembly

No./Package stop stop stop stop stop

10 10 10 10 10

45° 1/4" 45° 1/4" 45° 5/16" 45° 3/8" 45° 3/8" 45° 1/2" 45° 1/2" 45° 5/8" 45° 3/4" 45° R9R-hose 3/4"

3C14 714 Plug-in fitting 90° bend 1SN/2SN hose Part number

Description

3C147140404 3C147140604 3C147140605 3C147140606 3C147140806 3C147140808 3C147141208 3C147141210 3C147141212 3C147151212

1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4"

132

Plug-in Plug-in Plug-in Plug-in Plug-in Plug-in Plug-in Plug-in Plug-in Plug-in

Hose ID 90° 1/4" 90° 1/4" 90° 5/16" 90° 3/8" 90° 3/8" 90° 1/2" 90° 1/2" 90° 5/8" 90° 3/4" 90° R9R-hose 3/4"

PRODUCT CATALOGUE 2009


HYDROSCAND Interlock Fittings Interlock Fittings Product group 440 Interlock fittings are used for multispiral hoses: Gammaflex 5, Deltaflex, IsoBar 35 and IsoBar 42. The principle of the interlock fitting is that the hose is skived both internally and externally in order to create two zones: one locking and one sealing. The locking is created in the front of the fitting, where nipple and ferrule are swaged together with the reinforcement of the hose. The back of the fitting is the sealing part; the sealing part is created between nipple and inner tube. The interlock fitting is recommended for hydraulic systems with very high pulsating pressure and requirements of safety. Remember that a good assembly requires precise handling. The assembly should be done at a Hydroscand depot or an authorised franchisee according to the assembling instructions on the following page.

Table of contents

Ferrules page

4400-09 4500-10 4500-11

Ferrule Ferrule Ferrule

G-threaded fittings page

4401 4402 4403 4404

G-threaded G-threaded G-threaded G-threaded

Unified-threaded fittings page

4413 4414 4416 4417

Unified-threaded Unified-threaded Unified-threaded Unified-threaded

M-threaded fittings page

4423 4473 4474 4475

M-threaded M-threaded M-threaded M-threaded

Cone fittings page

4440

NPTF-threaded straight

SAE Flanges page

4443 4444 4448 4453 4454 4458 4460 4461 4463 4464 4468

SAE Flange straight SAE Flange 90° bend SAE Flange 45° bend SAE Flange straight SAE Flange 90° bend SAE Flange 45° bend SAE Flange 90° bend, long SAE Flange 45° bend, long Supercat Flange straight Supercat Flange 90° bend Supercat Flange 45° bend

ORFS Fittings page

4490 4491 4492

Unified-threaded straight, slip-on nut Unified-threaded 90° bend, slip-on nut Unified-threaded 45° bend, slip-on nut

Blastopak & Hydraulic hammer page

4501 4507 4508 4573 4576

G-threaded straight, thrust-wired nut G-threaded straight, thrust-wired nut G-threaded straight M-threaded straight, slip-on nut M-threaded straight, slip-on nut

135 139 139

straight,thrust-wired nut straight 90° bend, thrust-wired nut 45° bend, thrust-wired nut

straight, thrust-wired nut straight 90° bend, thrust-wired nut 45° bend, thrust-wired nut

straight straight, slip-on nut 90° bend, slip-on nut 45° bend, slip-on nut

135 135 135 135

135 135 135 136

136 138 138 138

136

Inner skiving Inner skiving for safe assembling.

Hydroscand reserves the right to modify any or all parts of this catalogue without any prior notice.

PRODUCT CATALOGUE 2009

136 136 136 136 137 137 137 137 137 137 137

138 138 138

139 139 139 139 139

133

4:4


Hydroscand Interlock Fittings

product group 440 Assembling instructions

1. Cut the hose transversely. Remember that all fittings have a cut-off length "A".

I L 2. Skive the hose down to the steel wire. The skiving length "L" and "I" is noted in the Swaging Manual. Be careful not to damage the steel wire when skiving. Clean the hose bore from dirt and particles.

B

A

3.

Push the ferrule onto the hose until it stops. Lubricate the insert and push it into the hose until the stop "B" meets the hose end.

4.

Swage the ferruleâ&#x20AC;&#x2122;s full length with the given swage diameter +2 mm.

Move the hose so that 2/3 of the ferrule ("b") gets swaged and the collapse is behind the area where the hose is skived. (The front part where the hose is skived internally is now less swaged).

Then swage the front part using the same swage diameter ("c"). If the ferrule is swaged at once, the collapse might occur at the wrong spot and the hose part becomes under-swaged.

b

c

5. Make sure that the correct internal collapse (see the Swaging Manual) has been achieved by using the Hydroscand control pin (9013-xx-xx). The GO side should pass into the fitting to make sure the swaging is not overdone. The STOP side, on the other hand, should not be able to pass to make sure the swaging is not underdone. Please note that on these fittings the STOP side should stop at the interlock!

STOP

GO

134

NOTE! It is important to use hoses and fittings that are adjusted to fit together. Our hoses and fittings have been tested for a perfect fit.

PRODUCT CATALOGUE 2009


Product group 440

Hydroscand Interlock Fittings 4404

4400-09/11/13/14

G-threaded 45° bend, thrust-wired nut

Ferrule Deltaflex/4SH/R13/R15/R35/R42 Part number 4400-09-12 4400-09-16 4400-09-20 4400-09-24 4400-09-32 4400-13-20 4400-13-24 4400-13-32 4400-14-20 4400-14-24

Use with

Hose ID

Deltaflex /4SH/R13/R15/R35/R42 Deltaflex /4SH/R13/R15/R35/R42 Deltaflex /4SH/R35 1 Deltaflex /4SH 1 Deltaflex /4SH R13/R15 1 R13/R35 1 R13/R35 R42 1 R42/R15 1

Part number

Thread

4401-12-12 4401-16-16 4401-20-20 4401-24-24 4401-32-32

G 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

3/4" 1" 1/4" 1/2" 2" 1/4" 1/2" 2" 1/4" 1/2"

60° cone sealing Part number

Thread

4404-12-12 4404-16-16 4404-20-20 4404-24-24 4404-32-32

G 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

G 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

Part number

Thread

4403-12-12 4403-16-16 4403-20-20 4403-24-24 4403-32-32

G 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

PRODUCT CATALOGUE 2009

3/4" 1" 1 1/4" 1 1/2" 2"

G-threaded straight, thrust-wired nut

Unified-threaded straight, thrust-wired nut

60° cone sealing

74° cone sealing

Type FS FS FS FS FS

ITL ITL ITL ITL ITL

Hose ID

Part number

3/4" 1" 1 1/4" 1 1/2" 2"

4413-17-12 4413-21-12 4413-21-16 4413-26-20 4413-30-20 4413-30-24 4413-40-32

Thread 1 1/16" - 12 1 5/16" - 12 1 5/16" - 12 1 5/8" - 12 1 7/8" - 12 1 7/8" - 12 2 1/2" - 12

UN UN UN UN UN UN UN

Type M M M M M

ITL ITL ITL ITL ITL

Type JIC JIC JIC JIC JIC JIC JIC

Hose ID

FS FS FS FS FS FS FS

ITL ITL ITL ITL ITL ITL ITL

3/4" 3/4" 1" 1 1/4" 1 1/4" 1 1/2" 2"

4414 Unified-threaded straight

60° cone sealing

4402-12-12 4402-16-16 4402-20-20 4402-24-24 4402-32-32

Hose ID

ITL ITL ITL ITL ITL

4413

G-threaded straight

Thread

45° 45° 45° 45° 45°

4401

4402

Part number

Type

74° cone sealing

Hose ID

Part number

3/4" 1" 1 1/4" 1 1/2" 2"

4414-17-12 4414-21-16 4414-26-20 4414-30-24 4414-40-32

Thread 1 1/16" 1 5/16" 1 5/8" 1 7/8" 2 1/2" -

12 12 12 12 12

UN UN UN UN UN

Type JIC JIC JIC JIC JIC

M M M M M

Hose ID ITL ITL ITL ITL ITL

3/4" 1" 1 1/4" 1 1/2" 2"

4403

4416

G-threaded 90° bend, thrust-wired nut

Unified-threaded 90° bend, thrust-wired nut

60° cone sealing

74° cone sealing

Type 90° 90° 90° 90° 90°

ITL ITL ITL ITL ITL

Hose ID

Part number

3/4" 1" 1 1/4" 1 1/2" 2"

4416-17-12 4416-21-16 4416-26-20 4416-30-24 4416-40-32

Thread 1 1/16" 1 5/16" 1 5/8" 1 7/8" 2 1/2" -

12 12 12 12 12

UN UN UN UN UN

Type JIC JIC JIC JIC JIC

90° 90° 90° 90° 90°

Hose ID ITL ITL ITL ITL ITL

3/4" 1" 1 1/4" 1 1/2" 2"

135

4:4


Hydroscand Interlock Fittings

product group 440

4417

4444

Unified-threaded 45° bend, thrust-wired nut

SAE Flange 90° bend Code 61

74° cone sealing Part number 4417-17-12 4417-21-16 4417-26-20 4417-30-24 4417-40-32

Thread 1 1/16" 1 5/16" 1 5/8" 1 7/8" 2 1/2" -

12 12 12 12 12

Type

UN UN UN UN UN

JIC JIC JIC JIC JIC

45° 45° 45° 45° 45°

ITL ITL ITL ITL ITL

Hose ID

Part number

Flange size

3/4" 1" 1 1/4" 1 1/2" 2"

4444-12-12 4444-16-12 4444-16-16 4444-20-16 4444-20-20 4444-20-24 4444-24-20 4444-24-24 4444-32-24 4444-32-32

3/4" 1" 1" 1/4" 1/4" 1/4" 1/2" 1/2" 2" 2"

4423 M-threaded straight

1 1 1 1 1

Type SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3

90° 90° 90° 90° 90° 90° 90° 90° 90° 90°

Hose ID ITL ITL ITL ITL ITL ITL ITL ITL ITL ITL

1 1 1 1 1

3/4" 3/4" 1" 1" 1/4" 1/2" 1/4" 1/2" 1/2" 2"

24° cone sealing with O-ring

4448 Part number

Thread

4423-36-12 4423-42-16 4423-52-20

M 36 x 2.0 M 42 x 2.0 M 52 x 2.0

Pipe

Type

Hose ID

25 30 38

SKS ITL 3/4" SKS ITL 1" SKS ITL 1 1/4"

4440 NPTF-threaded straight Coned thread and 60° cone sealing Part number

Thread

4440-12-12 3/4" - 14 4440-16-16 1" - 11½ 4440-20-20 1 1/4" - 11½ 4440-24-24 1 1/2" - 11½ 4440-32-32 2" - 11½

NPT NPT NPT NPT NPT

Type M M M M M

Hose ID

SAE Flange 45°bend Code 61 Part number

Flange size

4448-12-12 4448-16-12 4448-16-16 4448-20-16 4448-20-20 4448-24-20 4448-24-24 4448-32-24 4448-32-32

3/4" 1" 1" 1/4" 1/4" 1/2" 1/2" 2" 2"

1 1 1 1

3/4" 1" 1 1/4" 1 1/2" 2"

Type SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3

45° 45° 45° 45° 45° 45° 45° 45° 45°

Hose ID ITL ITL ITL ITL ITL ITL ITL ITL ITL

1 1 1 1

3/4" 3/4" 1" 1" 1/4" 1/4" 1/2" 1/2" 2"

4453 SAE Flange straight Code 62

4443

Part number

Flange size

4443-12-12 4443-16-12 4443-16-16 4443-16-20 4443-20-16 4443-20-20 4443-24-20 4443-24-24 4443-32-24 4443-32-32

3/4" 1" 1" 1" 1/4" 1/4" 1/2" 1/2" 2" 2"

136

1 1 1 1

SAE Flange straight

Part number

Flange size

Code 61

4453-12-12 4453-12-16 4453-16-12 4453-16-16 4453-16-20 4453-20-16 4453-20-20 4453-20-24 4453-24-20 4453-24-24 4453-32-24 4453-32-32

3/4" 3/4" 1" 1" 1" 1/4" 1/4" 1/4" 1/2" 1/2" 2" 2"

Type SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3

ITL ITL ITL ITL ITL ITL ITL ITL ITL ITL

Hose ID

1 1 1 1 1

3/4" 3/4" 1" 1/4" 1" 1/4" 1/4" 1/2" 1/2" 2"

1 1 1 1 1

Type SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6

ITL ITL ITL ITL ITL ITL ITL ITL ITL ITL ITL ITL

Hose ID

1 1 1 1 1 1

3/4" 1" 3/4" 1" 1/4" 1" 1/4" 1/2" 1/4" 1/2" 1/2" 2"

PRODUCT CATALOGUE 2009


Product group 440

Part number

Flange size

4454-12-12 4454-12-16 4454-16-12 4454-16-16 4454-16-20 4454-20-16 4454-20-20 4454-20-24 4454-24-20 4454-24-24 4454-32-24 4454-32-32

3/4" 3/4" 1" 1" 1" 1/4" 1/4" 1/4" 1/2" 1/2" 2" 2"

1 1 1 1 1

Hydroscand Interlock Fittings

4454

4461

SAE Flange 90°bend

SAE Flange 45°bend, long

Code 62

Code 62

Type SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6

Hose ID

90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90°

ITL ITL ITL ITL ITL ITL ITL ITL ITL ITL ITL ITL

1 1 1 1 1 1

3/4" 1" 3/4" 1" 1/4" 1" 1/4" 1/2" 1/4" 1/2" 1/2" 2"

Part number

Flange size

Type

4461-12-12 4461-16-16 4461-20-16 4461-20-20 4461-24-24

3/4" 1" 1 1/4" 1 1/4" 1 1/2"

SAE6 SAE6 SAE6 SAE6 SAE6

Hose ID 45° 45° 45° 45° 45°

L L L L L

ITL 3/4" ITL 1" ITL 1" ITL 1 1/4" ITL 1 1/2"

4463 Supercat Flange straight

4458

Part number

Flange size

4458-12-12 4458-16-12 4458-16-16 4458-16-20 4458-20-16 4458-20-20 4458-20-24 4458-24-24 4458-24-20 4458-32-32

3/4" 1" 1" 1" 1/4" 1/4" 1/4" 1/2" 1/2" 2"

1 1 1 1 1

SAE Flange 45°bend

Part number

Flange size

Code 62

4463-12-12 4463-16-12 4463-16-16 4463-20-16 4463-20-20 4463-24-20 4463-24-24

3/4" 1" 1" 1/4" 1/4" 1/2" 1/2"

Type SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6

Hose ID

45° 45° 45° 45° 45° 45° 45° 45° 45° 45°

ITL ITL ITL ITL ITL ITL ITL ITL ITL ITL

1 1 1 1 1

3/4" 3/4" 1" 1/4" 1" 1/4" 1/2" 1/2" 1/4" 2"

4460 SAE Flange 90°bend, long Code 62

Part number 4460-12-12 4460-16-12 4460-16-16 4460-20-16 4460-20-20 4460-24-24

Flange size

Type

3/4" 1" 1" 1 1/4" 1 1/4" 1 1/2"

SAE6 SAE6 SAE6 SAE6 SAE6 SAE6

PRODUCT CATALOGUE 2009

1 1 1 1

Type SC SC SC SC SC SC SC

Hose ID

3/4" 3/4" 1" 1" 1 1/4" 1 1/4" 1 1/2"

4464 Supercat Flange 90°bend Part number

Flange size

4464-12-12 4464-16-12 4464-16-16 4464-20-16 4464-20-20 4464-24-20 4464-24-24

3/4" 1" 1" 1/4" 1/4" 1/2" 1/2"

1 1 1 1

Type SC SC SC SC SC SC SC

Hose ID

90° 90° 90° 90° 90° 90° 90°

4468

Hose ID 90° 90° 90° 90° 90° 90°

L L L L L L

ITL 3/4" ITL 3/4" ITL 1" ITL 1" ITL 1 1/4" ITL 1 1/2"

3/4" 3/4" 1" 1" 1 1/4" 1 1/4" 1 1/2"

Supercat Flange 45°bend Part number

Flange size

4468-12-12 4468-16-12 4468-16-16 4468-20-16 4468-20-20 4468-24-20 4468-24-24

3/4" 1" 1" 1/4" 1/4" 1/2" 1/2"

1 1 1 1

Type SC SC SC SC SC SC SC

45° 45° 45° 45° 45° 45° 45°

Hose ID

3/4" 3/4" 1" 1" 1 1/4" 1 1/4" 1 1/2"

137

4:4


Hydroscand Interlock Fittings

Part number 4473-25-12 4473-30-16 4473-38-20

4473

4491

M-threaded straight, slip-on nut

Unified-threaded 90° bend, slip-on nut

24° cone sealing with O-ring

ORFS sealing

Thread Pipe Type M 36 x 2.0 25 M 42 x 2.0 30 M 52 x 2.0 38

Part number

Thread

4474-25-12 4474-30-16 4474-38-20

M 36 x 2.0 M 42 x 2.0 M 52 x 2.0

product group 440

Hose ID

DKSO FS ITL 3/4" DKSO FS ITL 1" DKSO FS ITL 1 1/4"

Part number 4491-12-12 1 3/16" 4491-16-16 1 7/16" 4491-20-20 1 11/16" 4491-24-24 2"

Thread Type -

12 12 12 12

UN UN UN UN

ORFS ORFS ORFS ORFS

Hose ID 90° 90° 90° 90°

3/4" 1" 1 1/4" 1 1/2"

4474

4492

M-threaded 90° bend, slip-on nut

Unified-threaded 45° bend, slip-on nut

24° cone sealing with O-ring

ORFS sealing

Pipe Type 25 30 38

Hose ID

DKSO 90° ITL 3/4" DKSO 90° ITL 1" DKSO 90° ITL 1 1/4"

Part number 4492-12-12 1 3/16" 4492-16-16 1 7/16" 4492-20-20 1 11/16" 4492-24-24 2"

Thread Type -

12 12 12 12

UN UN UN UN

ORFS ORFS ORFS ORFS

Hose ID 45° 45° 45° 45°

3/4" 1" 1 1/4" 1 1/2"

4475 M-threaded 45° bend, slip-on nut 24° cone sealing with O-ring Part number 4475-25-12 4475-30-16 4475-38-20

Thread Pipe Type M 36 x 2.0 25 M 42 x 2.0 30 M 52 x 2.0 38

Hose ID

DKSO 45° ITL 3/4" DKSO 45° ITL 1" DKSO 45° ITL 1 1/4"

4490 Unified-threaded straight, slip-on nut ORFS sealing Part number

Thread Type

4490-12-12 1 3/16" 4490-16-12 1 7/16" 4490-16-16 1 7/16" 4490-20-16 1 11/16" 4490-20-20 1 11/16" 4490-24-24 2" -

138

12 12 12 12 12 12

UN UN UN UN UN UN

ORFS ORFS ORFS ORFS ORFS ORFS

Hose ID FS FS FS FS FS FS

3/4" 3/4" 1" 1" 1 1/4" 1 1/2"

PRODUCT CATALOGUE 2009


Product group 440

Hydroscand Interlock Fittings 4500-11

4500-10

Ferrule

Ferrule

Deltaflex/R13, for hydraulic hammers Part number

Use with

4500-11-16 4500-11-20

Deltaflex/R13/4SH Deltaflex

Blastopak

Hose ID

Part number

Use with

Hose ID

1" 1 1/4"

4500-10-04 4500-10-06 4500-10-08 4500-10-12 4500-10-16

Blastopak Blastopak Blastopak Blastopak Blastopak

1/4" 3/8" 1/2" 3/4" 1"

4507

4501

G-threaded straight, thrust-wired nut

G-threaded straight, thrust-wired nut

60° cone sealing, for hydraulic hammers

60° cone sealing, for Blastopak

Part number

Thread

4507-16-16 4507-20-20

BSP 1" BSP 1 1/4"

Hose ID

Part number

Thread

FS ITL Ham. 1" FS ITL Ham. 1 1/4"

4501-04-04 4501-06-06 4501-08-08 4501-12-12 4501-16-16

BSP 1/4" BSP 3/8" BSP 1/2" BSP 3/4" BSP 1"

Type

60° cone sealing, for hydraulic hammers Type

4508-16-16

BSP 1"

M ITL Ham.

ITL ITL ITL ITL ITL

1/4" 3/8" 1/2" 3/4" 1"

M-threaded straight, slip-on nut

G-threaded straight

Thread

FS FS FS FS FS

Hose ID

4573

4508

Part number

Type

24° cone sealing with O-ring, for Blastopak

Hose ID

Part number

1"

4573-10-04 4573-14-06 4573-16-08 4573-25-12 4573-30-16

Thread M M M M M

18 22 24 36 42

x x x x x

1.5 1.5 1.5 2.0 2.0

Pipe

Type

10 14 16 25 30

DKSO DKSO DKSO DKSO DKSO

Hose ID FS FS FS FS FS

ITL ITL ITL ITL ITL

1/4" 3/8" 1/2" 3/4" 1"

4576 M-threaded straight, slip-on nut 24° cone sealing with O-ring, for hydraulic hammers Part number

Thread

4576-30-16 M 42 x 2.0

Pipe

Type

Hose ID

30 DKSO FS ITL Ham. 1"

PRODUCT CATALOGUE 2009

139

4:4


HYDROSCAND Hose couplings

Hose couplings – Industry/Fuel/AC

Product group 500 & 510 Beside our wide range of high quality hoses, we can also offer couplings for all kinds of applications. Low pressure couplings for applications with low pressure can be swaged with ferrules or assembled with hose clamps. As a further customer service, we can also offer pre-assembled hoses with couplings. The couplings are available in materials such as brass, stainless steel, bronze, aluminium and polypropene.

5012 5013 5014 5015 5016 5017 5018 5018-10 5018-20 5110-11 5110-12 5110-13 5110-14

5009-03 5023

Table of contents

Claw couplings (501) page

5001-01 5001-02 5001-03 5001-04 5001-11 5001-12 5001-13 5001-17 5009-01 5009-01 5009-02 5009-03 5001-51 5001-52 5001-53 5001-54 5001-55

Claw coupling Claw coupling, male thread Claw coupling, female thread Seal Claw coupling Claw coupling, M Claw coupling, F Three-way Claw coupling Seal Adjustable claw coupling Adjustable claw coupling, M Adjustable claw coupling, F GEKA GEKA, male thread GEKA, female thread GEKA, cover GEKA, seal

143 143 143 143 143 143 143 143 144 144 144 144 144 144 144 144 145

Connector pipes, Combination nipples, Fire couplings (502) page 5001-09 5056-30 5056-31 5056-32 5056-33 5056-34 5056-35 5491-00-03 5004-00 5004 5004 5010 5011

Connector pipe 145 Fire coupling 63, hose con. 145 Fire coupling 63, female 145 Fire coupling 63, male 145 Fire coupling 63 cover 145 Fire coupling 63, transition 145 Fire coupling 63 seal 145 Fire coupling 63, nozzle 145 Combination nipple, weldable 146 Combination nipple G male 146 Combination nipple G male 146 Cardan MOD 42 KMS, F 147 Cardan MOD 42 KVS, M 147

Hydroscand reserves the right to modify any or all parts of this catalogue without any prior notice.

PRODUCT CATALOGUE 2009

Cardan couplings (503) page Cardan MOD 42 KMG, F Cardan MOD 42 KVG, M Cardan MOD 42 KXM, F Cardan MOD 42 KXV, M Cardan MOD 42 KKM, F Cardan MOD 42 KKV, M Cardan coupling EPDM seal Cardan coupling Nitrile seal Cardan coupling Viton seal Bauer coupling, M Locking clamp for Bauer Bauer coupling, F Seal for Bauer coupling

147 147 147 147 148 148 148 148 148 149 149 149 149

CAM-LOCK couplings (504) page

5020 5021 5022 5023 5024 5025 5026 5028 5027 5029 5050 5022-50 5024-50

CAM-LOCK coupling A CAM-LOCK coupling B CAM-LOCK coupling C CAM-LOCK coupling D CAM-LOCK coupling E CAM-LOCK coupling F CAM-LOCK coupling DC Seal CAM-LOCK, Nitrile CAM-LOCK coupling DP Seal CAM-LOCK, EPDM Safety clamps CAM-LOCK Coupling C CAM-LOCK Coupling E

150 150 150 151 151 151 152 152 152 152 153 153 153

Dairy and petrol truck couplings, flanges (513) page 5051-20 5052-20 5053 5054 5055 5056 5057 5058 5056-25 5056-26 5056-27/28 5059-00 5059-20 5059-50 5059-70

Creamery Coupling, M Creamery Coupling, FS Hose tail, M Hose tail, FS Petrol truck fitting, M Petrol truck fitting, F Cover for petrol truck fitting Cover for petrol truck fitting Lock ring for petrol truck Seal ring forpetrol truck Seal rings HAPALON/P.T.F.E. Flange PN16 – solid Flange PN16 – solid, stainless Flange PN16 – swivel Flange PN16 – swivel

153 153 153 153 155 155 155 155 155 155 155 156 156 156 156

Compressor couplings (501) page

5079-00-01 5079-00-02 5079-00-03 5079-00-04 5079-00-05 5079-00-06 5079-00-07 5079-00-08

Crimp ring Crimp pipe Finger nut Connector pipe Seal Compressor elbow 90° Compressor coupling Compressor coupling

154 154 154 154 154 154 154 154

The table of contents continues on the next page.

141

5


Hose couplings – Industry/Fuel/AC

Steam couplings (501) page

5061-10 5062-10 5062-90 5200

Steam coupling, M Steam coupling, F Steam seal Swage ferrule

156 156 156 158

Concrete couplings (501) page

5201 5202 5203 5205 5206 5207 5208 5209 5210 5290

Concrete Concrete Concrete Concrete Concrete Concrete Concrete Concrete Concrete Concrete

coupling coupling coupling coupling coupling coupling coupling coupling coupling coupling

system system system system system system system system system Seal

22 22 22 22, 22 22 22 22 22

157 157 157 157 157 157 157 157 158 158

Brass pipe parts, including petrol pump and water couplings (506) page 5070 5071 5073 5074 5076 5077 5078 5079 5080 5081 5082 5083 5084 5095 5096 5096-16-99 5555 5555 5555 5555 5555 5555 5555 5555-63 5555-32 5555-33 5555-50 5491-00 5490-05 5491

Double nipple, G M x G M 158 Bushing, G M x G F 159 T-pipe, G F x G F x G F T 159 Hose Coupling, G M 159 Sleeve, G F x G F 159 Plug, G M 160 Connector pipe 160 Hose Coupling, G FS 160 Hose Coupling, G FS 90° 160 90° Elbow F – M 160 G F x G FS 160 Bushing, G M x G F 161 90° Elbow F – F 161 Petrol pump Coupling, male 165 Petrol pump Coupling, female 165 Tool for Petrol pump Couplings 165 Casing for hose 166 Casing G-thread, Male 166 Casing G-thread, female 166 Transition nipple 166 Hose nipple 166 Coupling nipple, G-thread 166 Coupling nipple, G-thread 166 Nozzle pipe Adjustable 167 Nozzle pipe Adjustable 167 Water gun, ergo-dynamic 167 Water gun Adjustable 167 Water gun, rubber cover 167 Hose holder Zinc 167 Flush nozzle 167

5555 5820

5708 142

product group 500 & 510

Stainless steel parts (511) page

5070~S 5071~S 5073~S 5074~S 5076~S 5077~S 5081~S 5084~S 5085~S 5086~S 5087~S 5088~S 5089~S 5089-95~S 5089-96~S 5090-10~S 5090-20~S 5090-30~S

5800 5801 5803 5810 5820 5826 5827 5828 5829 5830 5831 5839 5840 5882 5883 5884 5885 5886 5888 5889 5890 5891 5898 5860

5865 5704 5702 5703 5701 5706 5708 5705 5707 5744 5745 5743 5741 5746 5760 5761 5764

Double nipple, G M x G M 161 Bushing, G M x G F 162 T-pipe, G F x G F x G F 162 Hose nipple, G M 162 Bushing, G F 162 Plug Male, G M 163 90° Elbow F – M 163 90° Elbow F – F 163 45° Elbow F – F 163 90° Pipe bend, G M – G M 163 Straight bushing F, G F 163 Bushing F – F 164 Cross tube F, G F 164 Plug Female, G F 164 Nut, G F 164 Threaded welding nipple, G M 164 Nipple pipe M, G M 165 Screw bushing M 165

Low pressure couplings (512) page LP hose Ferrule 168 G-threaded Nut 168 LP hose fitting, G-threaded 168 LP hose fitting, G-threaded 168 LP hose fitting, M-threaded 168 LP hose fitting, stand pipe 169 LP hose fitting, stand pipe 90° 169 LP hose fitting, stand pipe 45° 169 M-threaded Nut 169 LP hose fitting, M-threaded 169 LP hose fitting, M-threaded 169 LP hose fitting, R-threaded 170 LP hose fitting, NPT-threaded 170 Banjo, Metric 90° 170 Banjo, welding 170 Banjo, Metric 170 Banjo bolt, M-threaded 170 Banjo bolt, G-threaded 170 Double banjo bolt 171 Banjo, DIN 7641 60° female 171 Nipple 171 T Nipple 171 Double Banjo 171 LP hose fitting, G-threaded, F 172

AC-couplings (512) page LP hose fitting, G-threaded, M 172 UN 90° FS with O-ring/valve 173 UN FS with O-ring/Valve 173 UN 90° FS with O-ring 173 UN FS with O-ring 173 UN 45° FS with O-ring/Valve 173 UN 90°T FS with O-ring/valve 173 UN 45° FS with O-ring 173 UN 90°T FS with O-ring 173 UN 90° MS with O-ring/valve 174 UN 45° MS with O-ring 174 UN 90° MS with O-ring 174 UN MS with O-ring 174 UN 45° MS with O-ring/valve 174 Hose connector 174 Hose connector with valve 174 AC O-ring 174

PRODUCT CATALOGUE 2009


Product group 500 & 510

Part number

Type

5001-01-06 5001-01-08 5001-01-12 5001-01-16

Claw Claw Claw Claw

Part number

Type

5001-02-06 5001-02-08 5001-02-12 5001-02-16

Claw Claw Claw Claw

Part number

Type

5001-03-06 5001-03-08 5001-03-12 5001-03-16

Claw Claw Claw Claw

Hose couplings â&#x20AC;&#x201C; Industry/Fuel/AC Product Group 501

Product Group 501

5001-01

5001-11

Claw coupling

Claw coupling

For hose

For hose PN 10Bar, DIN 3483

coupling coupling coupling coupling

Hose ID

Part number

Type

3/8" 1/2" 3/4" 1"

5001-11-04 5001-11-06 5001-11-08 5001-11-10 5001-11-12 5001-11-16 5001-11-20

Claw Claw Claw Claw Claw Claw Claw

Hose ID coupling coupling coupling coupling coupling coupling coupling

1/4" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4"

Product Group 501

Product Group 501

5001-02

5001-12

Claw coupling, male thread

Claw coupling, M

coupling coupling coupling coupling

PN 10Bar, DIN 3482

Thread

Part number

Type

3/8" 1/2" 3/4" 1"

5001-12-04 5001-12-06 5001-12-08 5001-12-12 5001-12-16 5001-12-20

Claw Claw Claw Claw Claw Claw

M M M M

Thread coupling coupling coupling coupling coupling coupling

1/4" 3/8" 1/2" 3/4" 1" 1 1/4"

M M M M M M

Product Group 501

Product Group 501

5001-03

5001-13

Claw coupling, female thread

Claw coupling, F

coupling coupling coupling coupling

PN 10Bar, DIN 3483

Thread

Part number

Type

3/8" 1/2" 3/4" 1"

5001-13-04 5001-13-06 5001-13-08 5001-13-12 5001-13-16 5001-13-20

Claw Claw Claw Claw Claw Claw

F F F F

Thread coupling coupling coupling coupling coupling coupling

1/4" 3/8" 1/2" 3/4" 1" 1 1/4"

F F F F F F

Product Group 501

Product Group 501

5001-04

5001-17

Seal

Three-way Claw coupling

For standard claw couplings

PN 10Bar, DIN 3489

Part number

Description

Part number

Type

Size

5001-04-00

Seal for air, black

5001-17-12 5001-17-16

Claw coupling, three-way Claw coupling, three-way

3/4" 1"

For stainless steel claw couplings, see chapter 10. PRODUCT CATALOGUE 2009

143

5


Hose couplings â&#x20AC;&#x201C; Industry/Fuel/AC

product group 500 & 510

Product Group 501

Product Group 501

5009-01

5001-51

Adjustable claw coupling

GEKA Hose claw coupling

DIN 3238 Part number

Type

5009-01-06 5009-01-08 5009-01-10 5009-01-12 5009-01-16

Adjustable Adjustable Adjustable Adjustable Adjustable

claw claw claw claw claw

coupling coupling coupling coupling coupling

Hose ID

Part number

Type/Material

3/8" 1/2" 5/8" 3/4" 1"

5001-51-06 5001-51-08 5001-51-10 5001-51-12 5001-51-16 5001-51-20 5001-51-24

Claw Claw Claw Claw Claw Claw Claw

coupling/Brass coupling/Brass coupling/Brass coupling/Brass coupling/Brass coupling/Brass coupling/Brass

Product Group 501

Type

5009-02-06 5009-02-08 5009-02-12 5009-02-16

Adjustable Adjustable Adjustable Adjustable

claw claw claw claw

5001-52

Adjustable claw coupling, M

GEKA, male thread

DIN 3238

Hose claw coupling, male thread

coupling coupling coupling coupling

Thread

Part number

Type/Material

G 3/8" M G 1/2" M G 3/4" M G 1" M

5001-52-04 5001-52-06 5001-52-08 5001-52-12 5001-52-16 5001-52-20 5001-52-24

Claw Claw Claw Claw Claw Claw Claw

5009-03-06 5009-03-08 5009-03-12 5009-03-16

Adjustable Adjustable Adjustable Adjustable

claw claw claw claw

5001-53

Adjustable claw coupling, F

GEKA, female thread

DIN 3238

Hose claw coupling, female thread

coupling coupling coupling coupling

Thread

Part number

Type/Material

G 3/8" F G 1/2" F G 3/4" F G 1" F

5001-53-04 5001-53-06 5001-53-08 5001-53-12 5001-53-16 5001-53-20 5001-53-24

Claw Claw Claw Claw Claw Claw Claw

5001-54

Seal

GEKA, cover

For adjustable claw couplings

5009-01-01 5009-01-02 5009-01-03 5009-01-04

Water, oil, air Steam Water, oil, air Steam

144

1/4" F 3/8" F 1/2" F 3/4" F 1" 1 1/4" 1 1/2" Product Group 501

5009-01

Fluid

Thread

coupling/Brass coupling/Brass coupling/Brass coupling/Brass coupling/Brass coupling/Brass coupling/Brass

Product Group 501

Part number

1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" Product Group 501

5009-03

Type

Thread

coupling/Brass coupling/Brass coupling/Brass coupling/Brass coupling/Brass coupling/Brass coupling/Brass

Product Group 501

Part number

3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2" Product Group 501

5009-02

Part number

Hose ID

Measure/mm

Part number

Type/Material

21x33x7 21x33x7 21x30x4 21x30x4

5001-54-01

Cover claw coupling / Brass

PRODUCT CATALOGUE 2009


Product group 500 & 510

Hose couplings – Industry/Fuel/AC Product Group 502

Product Group 501

5056-32

5001-55

Fire coupling 63, male thread

GEKA, seal Part number

Material

5001-55-01 5001-55-02

NBR NBR

Shore

Part number

Material

Thread

65° 50°

5056-32-32 5056-32-40

PRESSAL PRESSAL

2" 2 1/2"

The GEKA seals are alos available in Viton.

Product Group 502

Product Group 502

5001-09

5056-33

Connector pipe

Fire coupling 63 cover with chain

Steel / aluminium Part number

Type

Material

Hose ID

Part number

Material

5001-09-06

Connector pipe

Steel

3/8"

5056-33-40

PRESSAL

5001-09-08

Connector pipe

Steel

1/2"

5001-09-10

Connector pipe

Steel

5/8"

5001-09-12

Connector pipe

Steel

3/4"

5001-09-16

Connector pipe

Steel

1"

5001-09-20

Connector pipe

Steel

1 1/4"

5001-09-24

Connector pipe

Aluminium

1 1/2"

5001-09-32

Connector pipe

Aluminium

2"

Fire coupling 63, transition

5001-09-40

Connector pipe

Aluminium

2 1/2"

Transition to GEKA coupling

5001-09-48

Connector pipe

Aluminium

3"

5001-09-64

Connector pipe

Aluminium

4"

5001-09-80

Connector pipe

Aluminium

5"

5001-09-96

Connector pipe

Aluminium

6"

Product Group 502

5056-34

Part number

Material

5056-34-40

PRESSAL/Brass

Product Group 502

Product Group 502

5056-30

5056-35

Fire coupling 63, hose connection

Fire coupling 63 seal

Delivered in pairs. Part number

Material

5056-30-32 5056-30-40 5056-30-48

PRESSAL PRESSAL PRESSAL

Part number

Material

5056-31-32 5056-31-40

PRESSAL PRESSAL

Hose ID

Part number

Material

2" 2 1/2" 3"

5056-35-40

Chloroprene

Product Group 502

Product Group 502

5056-31

5491-00-03

Fire coupling 63, female thread

Fire coupling 63, nozzle Flush nozzle, claw coupling connection

Thread

Part number

Material

2" FS 2 1/2" FS

5491-00-03

PRESSAL

For more nozzles, see chapter 5:05. PRODUCT CATALOGUE 2009

145

5


Hose couplings â&#x20AC;&#x201C; Industry/Fuel/AC

product group 500 & 510

Product Group 502

Product Group 502

5004-00

5004

Combination nipple, weldable

Combination nipple G male thread

No surface treatment Part number

Pin

5004-00-08 5004-00-12 5004-00-16 5004-00-20 5004-00-24 5004-00-32 5004-00-40 5004-00-48 5004-00-64 5004-00-80 5004-00-96

1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"

Type Weldable Weldable Weldable Weldable Weldable Weldable Weldable Weldable Weldable Weldable Weldable

Hose ID nipple nipple nipple nipple nipple nipple nipple nipple nipple nipple nipple

1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"

Other dimensions available upon request.

Part number

Thread Type

Hose ID

5004-08-08 G 1/2" M Combination nipple 1/2" 5004-12-12 G 3/4" M Combination nipple 3/4" 5004-16-16 G 1" M Combination nipple 1" 5004-20-20 G 1 1/4" M Combination nipple 1 1/4" 5004-24-24 G 1 1/2" M Combination nipple 1 1/2" 5004-32-32 G 2" M Combination nipple 2" 5004-40-40 G 2 1/2" M Combination nipple 2 1/2" 5004-48-48 G 3" M Combination nipple 3" 5004-64-64 G 4" M Combination nipple 4" 5004-80-80 G 5" M Combination nipple 5" 5004-96-96 G 6" M Combination nipple 6" Other dimensions available upon request. Also available with NTP connection

Product Group 502

5004 Combination nipple G male thread AISI 316 stainless steel

Part number

Low pressure ball valves can be found in chapter 8:0

Thread Type

Hose ID

5004-08-09 G 1/2" M Combination nipple/SS 1/2" 5004-12-13 G3/4" M Combination nipple/SS 3/4" 5004-16-17 G1" M Combination nipple/SS 1" 5004-20-21 G1 1/4" M Combination nipple/SS 1 1/4" 5004-24-25 G1 1/2" M Combination nipple/SS 1 1/2" 5004-32-33 G2" M Combination nipple/SS 2" 5004-40-41 G2 1/2" M Combination nipple/SS 2 1/2" 5004-48-49 G3" M Combination nipple/SS 3" 5004-64-65 G4" M Combination nipple/SS 4" 5004-80-81 G5" M Combination nipple/SS 5" 5004-96-97 G6" M Combination nipple/SS 6" Other dimensions available upon request. Also available with NTP connection

146

PRODUCT CATALOGUE 2009


Product group 500 & 510

Hose couplings – Industry/Fuel/AC Product Group 503

Product Group 503

5010

5012

Cardan MOD 42 KMS, F

Cardan MOD 42 KMG, F

Female coupling with hose connectiton. Galvanised steel.

Female coupling with male thread. Galvanised steel.

Part number

Coupling size

Type

Hose ID

Part number

Coupling size

Type

Thread

5010-24-24 5010-32-24 5010-32-32 5010-40-40 5010-48-32 5010-48-40 5010-48-47 5010-48-48 5010-48-49 5010-64-64 5010-80-80 5010-96-96

38 48 48 60 76 76 76 76 76 102 133 152

KMS KMS KMS KMS KMS KMS KMS KMS KMS KMS KMS KMS

1 1/2" 1 1/2" 2" 2 1/2" 2" 2 1/2" 73.6 mm¤ 73.6 mm 3" 4" 5" 6"

5012-32-32 5012-48-32 5012-48-48 5012-64-64 5012-80-80 5012-96-96

48 76 76 102 133 152

KMG KMG KMG KMG KMG KMG

G G G G G G

Product Group 503

5013 Cardan MOD 42 KVG, M Male coupling with male thread. Galvanised steel.

¤ Short version L=170 mm (std. 240 mm)

Product Group 503

5011 Cardan MOD 42 KVS, M Male coupling with hose connectiton. Galvanised steel. Part number

Coupling size

Type

Hose ID

5011-24-24 5011-32-24 5011-32-32 5011-40-40 5011-48-32 5011-48-40 5011-48-47 5011-48-48 5011-48-49 5011-64-48 5011-64-64 5011-80-80 5011-96-96

38 48 48 60 76 76 76 76 76 102 102 133 152

KVS KVS KVS KVS KVS KVS KVS KVS KVS KVS KVS KVS KVS

1 1/2" 1 1/2" 2" 2 1/2" 2" 2 1/2" 73.6 mm¤ 73.6 mm 3" 73.6 mm 4" 5" 6"

¤ Kortversion L=125 mm (std. 170 mm)

2" 2" 3" 4" 5" 6"

Part number

Coupling size

Type

Thread

5013-32-24 5013-32-32 5013-48-32 5013-48-48 5013-64-64 5013-80-80 5013-96-96

48 48 76 76 102 133 152

KVG KVG KVG KVG KVG KVG KVG

G 1 1/2" G 2" G 2" G 3" G 4" G 5" G 6" Product Group 503

5014 Cardan MOD 42 KXM, F Blind female coupling. Galvanised steel. Part number

Coupling size

5014-00-24 5014-00-32 5014-00-40 5014-00-48 5014-00-64 5014-00-80 5014-00-96

38 48 60 76 102 133 152

Type KXM KXM KXM KXM KXM KXM KXM Product Group 503

5015 Cardan MOD 42 KXV, M

These couplings are also available in stainless steel.

PRODUCT CATALOGUE 2009

Blind male coupling. Galvanised steel. Part number

Coupling size

5015-00-24 5015-00-32 5015-00-40 5015-00-48 5015-00-64 5015-00-80 5015-00-96

38 48 60 76 102 133 152

Type KXV KXV KXV KXV KXV KXV KXV

147

5


Hose couplings – Industry/Fuel/AC

product group 500 & 510

Product Group 503

Product Group 503

5016

5018

Cardan MOD 42 KKM, F

Cardan coupling EPDM seal

Female coupling for welding. Galvanised steel.

EPDM (Standard) -50°C – +120°C

Part number

Coupling size

Type

Pipe dim.

Part number

Type

5016-00-32 5016-00-48 5016-00-64 5016-00-80 5016-00-96

48 76 102 133 152

KKM KKM KKM KKM KKM

50.8 76.0 102.0 133.0 152.4

5018-00-32 5018-00-40 5018-00-48 5018-00-64 5018-00-80 5018-00-96

Seal Seal Seal Seal Seal Seal

Coupling size

EPDM EPDM EPDM EPDM EPDM EPDM

48 60 76 102 133 152

Product Group 503

Product Group 503

5017

5018-10

Cardan MOD 42 KKV, M

Cardan coupling Nitrile seal

Male coupling for welding. Galvanised steel.

NITRILE -40°C – +100°C

Part number

Coupling size

Type

Pipe dim.

Part number

Type

5017-00-32 5017-00-48 5017-00-64 5017-00-80 5017-00-96

48 76 102 133 152

KKV KKV KKV KKV KKV

50.8 76.0 102.0 133.0 152.4

5018-10-32 5018-10-48 5018-10-64 5018-10-80 5018-10-96

Seal Seal Seal Seal Seal

Coupling size

NITRILE NITRILE NITRILE NITRILE NITRILE

48 76 102 133 152

Product Group 503

5018-20 Cardan coupling Viton seal VITON -40°C – +100°C Part number

Type

5018-20-24 5018-20-32 5018-20-48 5018-20-64 5018-20-80 5018-20-96

Seal Seal Seal Seal Seal Seal

Coupling size

VITON VITON VITON VITON VITON VITON

38 48 76 102 133 152

Don’t hesitate to ask for more designs and materials 148

PRODUCT CATALOGUE 2009


Product group 500 & 510

Hose couplings â&#x20AC;&#x201C; Industry/Fuel/AC Product Group 503

Product Group 503

5110-13

5110-11

Bauer coupling, F

Bauer coupling, M

Seal included.

Locking clamp not included.

Part number

Coupling size

Connection

Part number

Coupling size

Connection

5110-13-64 5110-13-80 5110-13-96

108 x 100 mm 133 x 125 mm 159 x 150 mm

4" 5" 6"

5110-11-64 5110-11-80 5110-11-96

108 x 100 mm 133 x 125 mm 159 x 150 mm

4" 5" 6"

Product Group 503

Product Group 503

5110-12

5110-14

Locking clamp for Bauer coupling

Seal for Bauer coupling

Part number

Decription

5110-12-64 5110-12-80 5110-12-96

Locking clamp Locking clamp Locking clamp

For connection

Part number

Decription/material

4" 5" 6"

5110-14-64 5110-14-80 5110-14-96

Seal/EPDM Seal/EPDM Seal/EPDM

For connection 4" 5" 6"

Industrial hoses see chapter 1:4

PRODUCT CATALOGUE 2009

149

5


Hose couplings â&#x20AC;&#x201C; Industry/Fuel/AC

product group 500 & 510 Product Group 504

Product Group 504

5020

5021

CAM-LOCK coupling A

CAM-LOCK coupling B

Part number

Description Material

5020-00-16 5020-00-20 5020-00-24 5020-00-32 5020-00-40 5020-00-48 5020-00-64

CAM-AL-A CAM-AL-A CAM-AL-A CAM-AL-A CAM-AL-A CAM-AL-A CAM-AL-A

Aluminium

5020-10-16 5020-10-20 5020-10-24 5020-10-32 5020-10-40 5020-10-48 5020-10-64

CAM-BR-A CAM-BR-A CAM-BR-A CAM-BR-A CAM-BR-A CAM-BR-A CAM-BR-A

Bronze

5020-20-16 5020-20-20 5020-20-24 5020-20-32 5020-20-40 5020-20-48 5020-20-64

CAM-SS-A CAM-SS-A CAM-SS-A CAM-SS-A CAM-SS-A CAM-SS-A CAM-SS-A

Stainless steel

5020-30-16 5020-30-20 5020-30-24 5020-30-32 5020-30-48

CAM-PP-A CAM-PP-A CAM-PP-A CAM-PP-A CAM-PP-A

Polyprophylene

Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium

Bronze Bronze Bronze Bronze Bronze Bronze

Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel

Polyprophylene

Description Material

Thread

F F F F F F F

5021-00-16 5021-00-20 5021-00-24 5021-00-32 5021-00-40 5021-00-48 5021-00-64

CAM-AL-B CAM-AL-B CAM-AL-B CAM-AL-B CAM-AL-B CAM-AL-B CAM-AL-B

Aluminium

G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3" G 4"

F F F F F F F

5021-10-16 5021-10-20 5021-10-24 5021-10-32 5021-10-40 5021-10-48 5021-10-64

CAM-BR-B CAM-BR-B CAM-BR-B CAM-BR-B CAM-BR-B CAM-BR-B CAM-BR-B

Bronze

G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3" G 4"

F F F F F F F

5021-20-16 5021-20-20 5021-20-24 5021-20-32 5021-20-40 5021-20-48 5021-20-64

CAM-SS-B CAM-SS-B CAM-SS-B CAM-SS-B CAM-SS-B CAM-SS-B CAM-SS-B

Stainless steel

Stainless steel

G 3" M G 4" M

G 1" F

5021-30-16 5021-30-20 5021-30-24 5021-30-32 5021-30-48

CAM-PP-B CAM-PP-B CAM-PP-B CAM-PP-B CAM-PP-B

Polyprophylene

G 1" M

Polyprophylene G 1 1/2" F Polyprophylene

Part number

G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3" G 4"

Polyprophylene G 1 1/4" F

G 2" F G 3" F

Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium

Bronze Bronze Bronze Bronze Bronze Bronze

G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3" G 4"

M M M M M M M

G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3" G 4"

M M M M M M M

G 1" M

Stainless steel G 1 1/4" M Stainless steel G 1 1/2" M Stainless steel

G 2" M

Stainless steel G 2 1/2" M Stainless steel

Polyprophylene G 1 1/4" M Polyprophylene G 1 1/2" M Polyprophylene Polyprophylene

G 2" M G 3" M

Product Group 504

Product Group 504

5022

5022

CAM-LOCK coupling C

CAM-LOCK coupling C

Part number

Description Material

5022-00-16 5022-00-20 5022-00-24 5022-00-32 5022-00-40 5022-00-48 5022-00-64

CAM-AL-C CAM-AL-C CAM-AL-C CAM-AL-C CAM-AL-C CAM-AL-C CAM-AL-C

5022-10-16 5022-10-20 5022-10-24 5022-10-32 5022-10-40 5022-10-48 5022-10-64

CAM-BR-C CAM-BR-C CAM-BR-C CAM-BR-C CAM-BR-C CAM-BR-C CAM-BR-C

150

Thread

Hose ID

Part number

Description Material

Hose ID

Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium

1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"

5022-20-16 5022-20-20 5022-20-24 5022-20-32 5022-20-40 5022-20-48 5022-20-64

CAM-SS-C CAM-SS-C CAM-SS-C CAM-SS-C CAM-SS-C CAM-SS-C CAM-SS-C

Stainless Stainless Stainless Stainless Stainless Stainless Stainless

Bronze Brons Brons Brons Brons Brons Brons

1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"

5022-30-16 5022-30-20 5022-30-24 5022-30-32 5022-30-48

CAM-PP-C CAM-PP-C CAM-PP-C CAM-PP-C CAM-PP-C

Polyprophylene Polyprophylene Polyprophylene Polyprophylene Polyprophylene

steel steel steel steel steel steel steel

1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 1" 1 1/4" 1 1/2" 2" 3"

PRODUCT CATALOGUE 2009


Product group 500 & 510

Hose couplings â&#x20AC;&#x201C; Industry/Fuel/AC Product Group 504

Product Group 504

5023

5024

CAM-LOCK coupling D

CAM-LOCK coupling E

Part number

Description Material

Thread

5023-00-16 5023-00-20 5023-00-24 5023-00-32 5023-00-40 5023-00-48 5023-00-64

CAM-AL-D CAM-AL-D CAM-AL-D CAM-AL-D CAM-AL-D CAM-AL-D CAM-AL-D

Aluminium

5023-10-16 5023-10-20 5023-10-24 5023-10-32 5023-10-40 5023-10-48 5023-10-64

CAM-BR-D CAM-BR-D CAM-BR-D CAM-BR-D CAM-BR-D CAM-BR-D CAM-BR-D

Bronze

5023-20-16 5023-20-20 5023-20-24 5023-20-32 5023-20-40 5023-20-48 5023-20-64

CAM-SS-D CAM-SS-D CAM-SS-D CAM-SS-D CAM-SS-D CAM-SS-D CAM-SS-D

Stainless steel

5023-30-16 5023-30-20 5023-30-24 5023-30-32 5023-30-48

CAM-PP-D CAM-PP-D CAM-PP-D CAM-PP-D CAM-PP-D

Polyprophylene

Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium

Bronze Bronze Bronze Bronze Bronze Bronze

Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel

mm 1" mm 1 1/4" mm 1 1/2" mm 2" mm 2 1/2" mm 3" mm 4"

25 32 38 51 64 76 102

mm 1" mm 1 1/4" mm 1 1/2" mm 2" mm 2 1/2" mm 3" mm 4"

5024-00-16 5024-00-20 5024-00-24 5024-00-32 5024-00-40 5024-00-48 5024-00-64

CAM-AL-E CAM-AL-E CAM-AL-E CAM-AL-E CAM-AL-E CAM-AL-E CAM-AL-E

Aluminium

G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3" G 4"

F F F F F F F

5024-10-16 5024-10-20 5024-10-24 5024-10-32 5024-10-40 5024-10-48 5024-10-64

CAM-BR-E CAM-BR-E CAM-BR-E CAM-BR-E CAM-BR-E CAM-BR-E CAM-BR-E

Bronze

G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3" G 4"

F F F F F F F

5024-20-16 5024-20-20 5024-20-24 5024-20-32 5024-20-40 5024-20-48 5024-20-64

CAM-SS-E CAM-SS-E CAM-SS-E CAM-SS-E CAM-SS-E CAM-SS-E CAM-SS-E

Stainless steel 25 mm

Stainless steel 102 mm

3" 4"

G 1" F

5024-30-16 5024-30-20 5024-30-24 5024-30-32 5024-30-48

CAM-PP-E CAM-PP-E CAM-PP-E CAM-PP-E CAM-PP-E

Polyprophylene 25 mm

1"

G 2" F G 3" F

Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium

Bronze Bronze Bronze Bronze Bronze Bronze

1"

Stainless steel 32 mm 1 1/4" Stainless steel 38 mm 1 1/2" Stainless steel 51 mm

2"

Stainless steel 64 mm 2 1/2" Stainless steel 76 mm

Polyprophylene 32 mm 1 1/4" Polyprophylene 38 mm 1 1/2" Polyprophylene 51 mm Polyprophylene 76 mm

2" 3"

Product Group 504

Product Group 504

5025

5025

CAM-LOCK coupling F

CAM-LOCK coupling F

Part number

Description Material

5025-00-16 5025-00-20 5025-00-24 5025-00-32 5025-00-40 5025-00-48 5025-00-64

CAM-AL-F CAM-AL-F CAM-AL-F CAM-AL-F CAM-AL-F CAM-AL-F CAM-AL-F

Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium

G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3" G 4"

5025-10-16 5025-10-20 5025-10-24 5025-10-32 5025-10-40 5025-10-48 5025-10-64

CAM-BR-F CAM-BR-F CAM-BR-F CAM-BR-F CAM-BR-F CAM-BR-F CAM-BR-F

Bronze Bronze Bronze Bronze Bronze Bronze Bronze

G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3" G 4"

PRODUCT CATALOGUE 2009

25 32 38 51 64 76 102

F F F F F F F

Polyprophylene G 1 1/2" F Polyprophylene

Hose ID

G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3" G 4"

Polyprophylene G 1 1/4" F Polyprophylene

Part number Description Material

Thread

Part number

Description Material

Thread

M M M M M M M

5025-20-16 5025-20-20 5025-20-24 5025-20-32 5025-20-40 5025-20-48 5025-20-64

CAM-SS-F CAM-SS-F CAM-SS-F CAM-SS-F CAM-SS-F CAM-SS-F CAM-SS-F

Stainless steel

G 1" M

Stainless steel

G 3" M G 4" M

M M M M M M M

5025-30-16 5025-30-20 5025-30-24 5025-30-32 5025-30-48

CAM-PP-F CAM-PP-F CAM-PP-F CAM-PP-F CAM-PP-F

Polyprophylene

G 1" M

Stainless steel G 1 1/4" M Stainless steel G 1 1/2" M Stainless steel

G 2" M

Stainless steel G 2 1/2" M Stainless steel

Polyprophylene G 1 1/4" M Polyprophylene G 1 1/2" M Polyprophylene Polyprophylene

G 2" M G 3" M

151

5


Hose couplings – Industry/Fuel/AC

product group 500 & 510

Product Group 504

Product Group 504

5026

5027

CAM-LOCK coupling DC

CAM-LOCK coupling DP

Part number

Description Material

Dim.

Part number

Description Material

5026-00-16 5026-00-20 5026-00-24 5026-00-32 5026-00-40 5026-00-48 5026-00-64

CAM-AL-DC CAM-AL-DC CAM-AL-DC CAM-AL-DC CAM-AL-DC CAM-AL-DC CAM-AL-DC

5026-10-16 5026-10-20 5026-10-24 5026-10-32 5026-10-40 5026-10-48 5026-10-64

Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium

1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"

5027-00-16 5027-00-20 5027-00-24 5027-00-32 5027-00-40 5027-00-48 5027-00-64

CAM-AL-DP CAM-AL-DP CAM-AL-DP CAM-AL-DP CAM-AL-DP CAM-AL-DP CAM-AL-DP

Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium

1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"

CAM-BR-DC CAM-BR-DC CAM-BR-DC CAM-BR-DC CAM-BR-DC CAM-BR-DC CAM-BR-DC

Bronze Bronze Bronze Bronze Bronze Bronze Bronze

1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"

5027-10-16 5027-10-20 5027-10-24 5027-10-32 5027-10-40 5027-10-48 5027-10-64

CAM-BR-DP CAM-BR-DP CAM-BR-DP CAM-BR-DP CAM-BR-DP CAM-BR-DP CAM-BR-DP

Bronze Bronze Bronze Bronze Bronze Bronze Bronze

1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"

5026-20-16 5026-20-20 5026-20-24 5026-20-32 5026-20-40 5026-20-48 5026-20-64

CAM-SS-DC CAM-SS-DC CAM-SS-DC CAM-SS-DC CAM-SS-DC CAM-SS-DC CAM-SS-DC

Stainless Stainless Stainless Stainless Stainless Stainless Stainless

1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"

5027-20-16 5027-20-20 5027-20-24 5027-20-32 5027-20-40 5027-20-48 5027-20-64

CAM-SS-DP CAM-SS-DP CAM-SS-DP CAM-SS-DP CAM-SS-DP CAM-SS-DP CAM-SS-DP

Stainless Stainless Stainless Stainless Stainless Stainless Stainless

5026-30-16 5026-30-20 5026-30-24 5026-30-32 5026-30-48

CAM-PP-DC CAM-PP-DC CAM-PP-DC CAM-PP-DC CAM-PP-DC

Polyprophylene Polyprophylene Polyprophylene Polyprophylene Polyprophylene

1" 1 1/4" 1 1/2" 2" 3"

5027-30-16 5027-30-20 5027-30-24 5027-30-32 5027-30-48

CAM-PP-DP CAM-PP-DP CAM-PP-DP CAM-PP-DP CAM-PP-DP

Polyprophylene Polyprophylene Polyprophylene Polyprophylene Polyprophylene

steel steel steel steel steel steel steel

1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 1" 1 1/4" 1 1/2" 2" 3"

Product Group 504

Product Group 504

5028

5029

Seal CAM-LOCK, Nitrile

Seal CAM-LOCK, EPDM

NITRILE (Standard)

EPDM

Part number

Description

5028-00-08 5028-00-12 5028-00-16 5028-00-20 5028-00-24 5028-00-32 5028-00-40 5028-00-48 5028-00-64

Seal Seal Seal Seal Seal Seal Seal Seal Seal

152

steel steel steel steel steel steel steel

Dim.

NITRILE NITRILE NITRILE NITRILE NITRILE NITRILE NITRILE NITRILE NITRILE

Dim.

Part number

Description

1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"

5029-00-16 5029-00-20 5029-00-24 5029-00-32 5029-00-40 5029-00-48 5029-00-64

Seal Seal Seal Seal Seal Seal Seal

EPDM EPDM EPDM EPDM EPDM EPDM EPDM

Dim. 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"

PRODUCT CATALOGUE 2009


Product group 500 & 510

Hose couplings â&#x20AC;&#x201C; Industry/Fuel/AC Product Group 504

Product Group 513

5052-20

5050

Creamery Coupling, FS

Safety clamps Part number

Description

Material

5050-00-12 5050-00-16 5050-00-20 5050-00-24 5050-00-32 5050-00-40 5050-00-48 5050-00-64 5050-20-16 5050-20-24 5050-20-32 5050-20-48

Safety Safety Safety Safety Safety Safety Safety Safety Safety Safety Safety Safety

Aluminium 19 x 6 Aluminium 25 x 6 Aluminium 32 x 6 Aluminium 38 x 6.5 Aluminium 50 x 8 Aluminium 63 x 8 Aluminium 75 x 8 Aluminium 100 x 8 Stainless steel 25 x 6 Stainless steel 38 x 6.5 Stainless steel 50 x 8 Stainless steel 75 x 8

clamps calmps calmps calmps calmps calmps calmps calmps calmps calmps calmps calmps

Hose dim. mm mm mm mm mm mm mm mm mm mm mm mm

For safety claps Part number Description 5052-20-16 5052-20-20 5052-20-24 5052-20-32 5052-20-48 5052-20-64

Creamery Creamery Creamery Creamery Creamery Creamery

coupling coupling coupling coupling coupling coupling

CAM-LOCK Coupling C For safety claps Part number

Description

Material

5022-50-12 5022-50-16 5022-50-20 5022-50-24 5022-50-32 5022-50-40 5022-50-48

CAM-SF-C CAM-SF-C CAM-SF-C CAM-SF-C CAM-SF-C CAM-SF-C CAM-SF-C

Stainless Stainless Stainless Stainless Stainless Stainless Stainless

DIN2828 DIN2828 DIN2828 DIN2828 DIN2828 DIN2828 DIN2828

Hose dim. steel steel steel steel steel steel steel

19 25 32 38 50 63 75

mm mm mm mm mm mm mm

Product Group 504

5024-50 CAM-LOCK Coupling E

Description

Material

5024-50-12 5024-50-16 5024-50-20 5024-50-24 5024-50-32 5024-50-40 5024-50-48

CAM-SF-E CAM-SF-E CAM-SF-E CAM-SF-E CAM-SF-E CAM-SF-E CAM-SF-E

Stainless Stainless Stainless Stainless Stainless Stainless Stainless

DIN2828 DIN2828 DIN2828 DIN2828 DIN2828 DIN2828 DIN2828

Hose tail, M For safety claps, DIN 2817 Part number Stainless steel 5053-20-12 G 5053-20-16 5053-20-20 G 1 5053-20-24 G 1 5053-20-32 5053-20-40 G 2 5053-20-48 5053-20-64 Brass 5053-40-12 G 5053-40-16 5053-40-20 G 1 5053-40-24 G 1 5053-40-32 5053-40-48 5053-40-64

Thread

Description

19 25 32 38 50 63 75

mm mm mm mm mm mm mm

Product Group 513

5051-20 Creamery Coupling, M For safety claps Part number Description 5051-20-16 5051-20-20 5051-20-24 5051-20-32 5051-20-48 5051-20-64

Creamery Creamery Creamery Creamery Creamery Creamery

coupling coupling coupling coupling coupling coupling

PRODUCT CATALOGUE 2009

Hose dim.

3/4" G 1" 1/4" 1/2" G 2" 1/2" G 3" G 4"

M M M M M M M M

Hose Hose Hose Hose Hose Hose Hose Hose

tail-SF tail-SF tail-SF tail-SF tail-SF tail-SF tail-SF tail-SF

19 25 32 38 50 63 75 100

mm mm mm mm mm mm mm mm

3/4" G 1" 1/4" 1/2" G 2" G 3" G 4"

M M M M M M M

Hose Hose Hose Hose Hose Hose Hose

tail-MS tail-MS tail-MS tail-MS tail-MS tail-MS tail-MS

19 25 32 38 50 75 100

mm mm mm mm mm mm mm

Product Group 513

5054

Hose dim. steel steel steel steel steel steel steel

Thread Hose dim. SMS G 1" UF SMS G 1 1/4" UF SMS G 1 1/2" UF SMS G 2" UF SMS G 3" UF SMS G 4" UF

25 32 38 50 75 100

mm mm mm mm mm mm

mm mm mm mm mm mm

5053

For safety claps Part number

25 32 38 50 75 100

Product Group 513

Product Group 504

5022-50

Thread Hose dim. SMS G 1" FS SMS G 1 1/4" FS SMS G 1 1/2" FS SMS G 2" FS SMS G 3" FS SMS G 4" FS

Hose tail, FS For safety claps, DIN 2817 Part number Stainless steel 5054-20-12 G 5054-20-16 5054-20-20 G 1 5054-20-24 G 1 5054-20-32 5054-20-40 G 2 5054-20-48 5054-20-64 Brass 5054-40-12 G 5054-40-16 5054-40-20 G 1 5054-40-24 G 1 5054-40-32 5054-40-48 5054-40-64

Thread

Description

Hose dim.

3/4" G 1" 1/4" 1/2" G 2" 1/2" G 3" G 4"

FS FS FS FS FS FS FS FS

Hose Hose Hose Hose Hose Hose Hose Hose

tail-SF tail-SF tail-SF tail-SF tail-SF tail-SF tail-SF tail-SF

19 25 32 38 50 63 75 100

mm mm mm mm mm mm mm mm

3/4" G 1" 1/4" 1/2" G 2" G 3" G 4"

FS FS FS FS FS FS FS

Hose Hose Hose Hose Hose Hose Hose

tail-MS tail-MS tail-MS tail-MS tail-MS tail-MS tail-MS

19 25 32 38 50 75 100

mm mm mm mm mm mm mm

153

5


Hose couplings – Industry/Fuel/AC

product group 500 & 510

Product Group 501

Product Group 501

5079-00-01

5079-00-05

Crimp ring

Seal

Water well drilling

Water well drilling

Part number

Female

Male

Part number

Description

5079-00-01

63

73

5079-00-05

Seal for 5079-00-02

Swage diameter: 66 mm Ferrule:

5079-00-02

Hose:

1425-72/74-32

Product Group 501

Product Group 501

5079-00-02

5079-00-06

Crimp pipe

Compressor elbow 90°

Water well drilling

Water well drilling

Part number

Description

Connection

Part number

Connection

5079-00-02

Crimp pipe

Atlas 2" M

5079-00-06

Atlas 2" FS – Atlas 2" M

When swaging: Use two crimp rings (5079-00-01)

Product Group 501

Product Group 501

5079-00-03

5079-00-07

Finger nut

Compressor Coupling

Water well drilling

Water well drilling

Part number

Description

Connection

Part number

Connection

5079-00-03

Winged nut

Atlas 2" F

5079-00-07

Atlas 2" M – BSP 2" M

To be assembled with 5079-00-02

Product Group 501

Product Group 501

5079-00-04

5079-00-08

Connector pipe

Compressor coupling

Water well drilling

Water well drilling

Part number

Description

Part number

Connection

5079-00-04

Connector pipe

5079-00-08

Atlas 2" F – BSP 2" M

When swaging: Use two crimp rings (5079-00-01)

154

PRODUCT CATALOGUE 2009


Product group 500 & 510

Hose couplings â&#x20AC;&#x201C; Industry/Fuel/AC Product Group 513

Product Group 513

5056-25

5055

Lock ring for petrol truck fitting

Petrol truck fitting, M DIN 28450, male, stainless steel Part number

Description

Type

5055-20-32 5055-20-48 5055-20-64

Gas truck fitting Gas truck fitting Gas truck fitting

VK 50 /SS VK 80 /SS VK 100 /SS

DIN 28450, female, stainless steel

Size

Part number

Description

Type

2" 3" 4"

5056-25-32 5056-25-48 5056-25-64

Lock ring Lock ring Lock ring

MKLR 50 /SS MKLR 80 /SS MKLR 100 /SS

Product Group 513

5056-26 Seal ring for petrol truck fitting

Petrol truck fitting, F DIN 28450, female, stainless steel Description

Type

5056-20-32 5056-20-48 5056-20-64

Gas truck fitting Gas truck fitting Gas truck fitting

MK 50 /SS MK 80 /SS MK 100 /SS

2" 3" 4"

Product Group 513

5056

Part number

Size

DIN 28450, female, stainless steel

Size

Part number

Description

Type

Size

2" 3" 4"

5056-26-32 5056-26-48 5056-26-64

Seal ring Seal ring Seal ring

MKSR 50 /SS MKSR 80 /SS MKSR 100 /SS

2" 3" 4"

Product Group 513

Product Group 513

5057

5056-27/28

Cover for petrol truck fitting, M

Seal ringS HAPALON/P.T.F.E. for petrol truck fitting

DIN 28450, male, stainless steel

DIN 28450

Part number

Description

Type

5057-20-32 5057-20-48

Cover for male part Cover for male part

MB 50 /SS MB 80 /SS

Size

Part number

Description

Type

2" 3"

5056-27-32 5056-27-48 5056-27-64 5056-28-32 5056-28-48 5056-28-64

Hypalon seal Hypalon seal Hypalon seal P.T.F.E. seal P.T.F.E. seal P.T.F.E. seal

TWHS 50 TWHS 80 TWHS 100 TS 50 T TS 80 T TS 100 T

Size 2" 3" 4" 2" 3" 4"

Product Group 513

5058 Cover for petrol truck fitting, F DIN 28450, female, stainless steel Part number

Description

Type

5058-20-32 5058-20-48

Cover for female part VB 50 /SS Cover for female part VB 80 /SS

Size 2" 3"

TW fittings are also available in other materials and dimensions. PRODUCT CATALOGUE 2009

155

5


Hose couplings – Industry/Fuel/AC

product group 500 & 510

Product Group 513

Product Group 501

5061-10

5059-00

Steam coupling, M

Flange PN16 – solid

Incl. safety clapms. DIN 2826. For hose 1454-30

For safety clamps Part number

Description

5059-00-24 5059-00-32 5059-00-40 5059-00-48 5059-00-64

Flange Flange Flange Flange Flange

PN16 PN16 PN16 PN16 PN16

– – – – –

solid solid solid solid solid

Hose ID

Part number

Thread Description

38 50 63 75 100

5061-10-08 G 5061-10-12 G 5061-10-16 5061-10-24 G 1 5061-10-32

1/2" 3/4" G 1" 1/2" G 2"

mm mm mm mm mm

M M M M M

Steam Steam Steam Steam Steam

Coupling Coupling Coupling Coupling Coupling

Product Group 513

5062-10 Steam coupling, F

Flange PN16 – solid, stainless

Incl. safety clapms. DIN 2826. For hose 1454-30

For safety clamps, stainless steel, AISI 316 Description

5059-20-24 5059-20-32 5059-20-40 5059-20-48 5059-20-64

Flange Flange Flange Flange Flange

PN16 PN16 PN16 PN16 PN16

– – – – –

solid solid solid solid solid

/SS /SS /SS /SS /SS

Hose ID

Part number

38 50 63 75 100

5062-10-08 5062-10-12 5062-10-16 5062-10-24 5062-10-32

mm mm mm mm mm

Thread Description G 1/2" F G 3/4" F G 1" F G 1 1/2" F G 2" F

Steam Steam Steam Steam Steam

Description

5059-50-24 5059-50-32 5059-50-40 5059-50-48 5059-50-64

Flange Flange Flange Flange Flange

PN16 PN16 PN16 PN16 PN16

5062-90 Steam seal

For safety clamps

DIN 2826

– – – – –

swivel swivel swivel swivel swivel

Hose ID

Part number

Description

38 50 63 75 100

5062-90-08 5062-90-12 5062-90-16 5062-90-24 5062-90-32

Steam Steam Steam Steam Steam

mm mm mm mm mm

Flange PN16 – swivel, stainless For safety clamps, stainless steel, AISI 316

5059-70-24 5059-70-32 5059-70-40 5059-70-48 5059-70-64

Flange Flange Flange Flange Flange

156

PN16 PN16 PN16 PN16 PN16

Product Group 501

5059-50

5059-70

Description

1/2" 3/4" 1" 1 1/2" 2"

Flange PN16 – swivel

Product Group 513

Part number

Hose ID

coupling coupling coupling coupling coupling

Product Group 513

Part number

1/2" 3/4" 1" 1 1/2" 2"

Product Group 501

5059-20

Part number

Hose ID

Hose ID – – – – –

swivel swivel swivel swivel swivel

/SS /SS /SS /SS /SS

38 50 63 75 100

mm mm mm mm mm

seal seal seal seal seal

DIN DIN DIN DIN DIN

Hose ID 2826 2826 2826 2826 2826

1/2" 3/4" 1" 1 1/2" 2"

Important to remember while assembling steam couplings 1. The coupling insert is pushed into a transversely cut hose. Save a couple of millimeters to max. inpush because of the hose expansion. 2. The safety clamps should be assembled on the hose and fixed in the jaw lock. 3. Assemble the screws and tighten them. 4. A small distance should appear on a parallel basis between the clamp halves. 5. Always follow-up draft the couplings after usage. This should always be done on a regular basis.

PRODUCT CATALOGUE 2009


Product group 500 & 510

Hose couplings â&#x20AC;&#x201C; Industry/Fuel/AC Product Group 501

Product Group 501

5201

5206

Concrete coupling system 22, male, G-threaded F

Concrete coupling system 22, female, G-threaded M

Part number

Description

5201-35-16 5201-41-16 5201-41-20 5201-50-16 5201-50-20 5201-50-24 5201-50-32 5201-63-20 5201-63-24 5201-63-32

Male Male Male Male Male Male Male Male Male Male

coupling coupling coupling coupling coupling coupling coupling coupling coupling coupling

Size ID 35 41 41 50 50 50 50 63 63 63

Thread

Part number

Description

G 1" G 1" 1/4" G 1" 1/4" 1/2" G 2" 1/4" 1/2" G 2"

5206-35-16 5206-42-16 5206-51-20 5206-64-32 5206-64-40

Female Female Female Female Female

G1 G1 G1 G1 G1

F F F F F F F F F F

coupling coupling coupling coupling coupling

Size ID

Thread

35 42 51 64 64

G 1" M* G 1" M G 1 1/4" M G 2" M G 2 1/2" M

* = One handle

Product Group 501

5207

Concrete coupling system 22, female part for hose

Product Group 501

Safety clamps.

5202 Concrete coupling system 22, male, G-threaded M Part number

Description

5202-35-16 5202-41-16 5202-50-20 5202-63-32

Male Male Male Male

coupling coupling coupling coupling

Size ID 35 41 50 63

Thread G 1" G 1" G 1 1/4" G 2"

M M M M

Part number

Description

5207-35-16 5207-42-16 5207-51-22 5207-51-24 5207-64-32

Female Female Female Female Female

coupling coupling coupling coupling coupling

Size ID

Hose ID

35 42 51 51 64

25 mm* 25 mm 35 mm 38 mm 50 mm

* = One handle

Product Group 501

5208

Product Group 501

5203

Concrete coupling system 22, female part for hose

Concrete coupling system 22 Male part for hose

Assembly with ferrule 5200.

Safety clamps. Part number

Description

5203-35-16 5203-41-16 5203-50-22 5203-50-24 5203-63-32

Male Male Male Male Male

coupling coupling coupling coupling coupling

Size ID 35 41 50 50 63

Hose ID 25 25 35 38 50

mm mm mm mm mm

Part number

Description

5208-35-16 5208-42-16 5208-51-22 5208-51-24 5208-64-32

Female Female Female Female Female

coupling coupling coupling coupling coupling

Size ID

Hose ID

35 42 51 51 64

25 mm* 25 mm 35 mm 38 mm 50 mm

* = One handle

Product Group 501

Product Group 501

5209

5205

Concrete coupling system 22, male part for hose

Concrete coupling system 22, female, G-threaded F Part number

Description

5205-35-16 5205-42-16 5205-51-16 5205-51-20 5205-51-24 5205-64-32 5205-64-40

Female Female Female Female Female Female Female

coupling coupling coupling coupling coupling coupling coupling

Size ID 35 42 51 51 51 64 64

Thread G 1" G 1" G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2"

F F F F F F F

Assembly with ferrule 5200. Part number

Description

5209-35-16 5209-41-16 5209-50-22 5209-50-24 5209-63-32

Male Male Male Male Male

coupling coupling coupling coupling coupling

Size ID 35 41 50 50 63

Hose ID 25 25 35 38 50

mm mm mm mm mm

* = One handle

PRODUCT CATALOGUE 2009

157

5


Hose couplings â&#x20AC;&#x201C; Industry/Fuel/AC

product group 500 & 510

Product Group 501

Product Group 506

5210

5070

Concrete coupling system 22, M

Double nipple, G M x G M Brass

Male coupling for hose Part number

Description

Size M

5210-16-12 5210-16-16 5210-20-22 5210-20-24 5210-24-26 5210-32-22 5210-32-26 5210-32-32

Male Male Male Male Male Male Male Male

1" 1" 1 1/4" 1 1/4" 1 1/2" 2" 2" 2"

hose hose hose hose hose hose hose hose

pipe pipe pipe pipe pipe pipe pipe pipe

Hose ID 19 25 35 38 42 35 42 50

mm mm mm mm mm mm mm mm

Product Group 501

5200 Swage ferrule For concrete coupling 5208 and 5209 Part number

Description

5200-00-12 5200-00-16 5200-00-22 5200-00-24 5200-00-26 5200-00-32

Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule

Hose Dim. 19 25 35 38 42 50

x x x x x x

6 7 7 7 7 9

Product Group 501

5290

Part number

Thread 1

5070-02-02 5070-04-02 5070-04-04 5070-06-04 5070-06-06 5070-08-04 5070-08-06 5070-08-08 5070-12-06 5070-12-08 5070-12-12 5070-16-08 5070-16-12 5070-16-16 5070-20-16 5070-20-20 5070-24-16 5070-24-20 5070-24-24 5070-32-20 5070-32-24 5070-32-32 5070-40-24 5070-40-32 5070-40-40 5070-48-24 5070-48-32 5070-48-48 5070-64-48 5070-64-64

G G G G G G G G G G G

G G G G G

1 1 1 1 1

G2 G2 G2

1/8" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" G 1" G 1" G 1" 1/4" 1/4" 1/2" 1/2" 1/2" G 2" G 2" G 2" 1/2" 1/2" 1/2" G 3" G 3" G 3" G 4" G 4"

M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M

x Thread 2 G G G G G G G G G G G G G

G1 G G G G

1 1 1 1

G1 G2 G1

1/8" 1/8" 1/4" 1/4" 3/8" 1/4" 3/8" 1/2" 3/8" 1/2" 3/4" 1/2" 3/4" G 1" G 1" 1/4" G 1" 1/4" 1/2" 1/4" 1/2" G 2" 1/2" G 2" 1/2" 1/2" G 2" G 3" G 3" G 4"

M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M

RSK no. 1985209 1985407 1985217 1985423 1985225 1985449 1985456 1985233 1985480 1985498 1985258 1985522 1985530 1985274 1985589 1985282 1985621 1985639 1985308 1987734 1985688 1985316 1985712 1985720 1985324 1985779 1985761 1985332 1985829 1985340

Concrete coupling Seal Part number

Description

5290-00-35 5290-00-42 5290-00-51 5290-00-64

Seal Seal Seal Seal

158

NBR NBR NBR NBR

PRODUCT CATALOGUE 2009


Product group 500 & 510

Part number

Thread 1

5071-04-02 5071-06-02 5071-06-04 5071-08-02 5071-08-04 5071-08-06 5071-12-04 5071-12-06 5071-12-08 5071-16-08 5071-16-12 5071-20-12 5071-20-16 5071-24-12 5071-24-16 5071-24-20 5071-32-20 5071-32-24 5071-40-24 5071-40-32 5071-48-24 5071-48-32 5071-48-40 5071-64-32 5071-64-48

G G G G G G G G G

G G G G G

1 1 1 1 1

G2 G2

1/4" 3/8" 3/8" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" G 1" G 1" 1/4" 1/4" 1/2" 1/2" 1/2" G 2" G 2" 1/2" 1/2" G 3" G 3" G 3" G 4" G 4"

M M M M M M M M M M M M M M M M M M M M M M M M M

Hose couplings â&#x20AC;&#x201C; Industry/Fuel/AC Product Group 506

Product Group 506

5071

5074

Bushing, G M x G F

Hose Coupling, G M

Brass

Brass

x Thread 2 G G G G G G G G G G G G G G G G G

1 1 1 1

G1 G2

1/8" 1/8" 1/4" 1/8" 1/4" 3/8" 1/4" 3/8" 1/2" 1/2" 3/4" 3/4" G 1" 3/4" G 1" 1/4" 1/4" 1/2" 1/2" G 2" 1/2" G 2" 1/2" G 2" G 3"

F F F F F F F F F F F F F F F F F F F F F F F F F

RSK no.

Part number

Thread

Type Hose ID

1986009 1986017 1986025 1986033 1986041 1986058 1986074 1986082 1986090 1986124 1986132 1986173 1986181 1986215 1986223 1986231 1986272 1986280 1986314 1986322 1986355 1986363 1986371 1986405 1986421

5074-04-04 5074-04-06 5074-04-08 5074-06-04 5074-06-06 5074-06-08 5074-08-06 5074-08-08 5074-08-10 5074-08-12 5074-10-10 5074-12-08 5074-12-12 5074-12-16 5074-16-12 5074-16-16 5074-20-16 5074-20-20 5074-20-24 5074-24-20 5074-24-24 5074-24-32 5074-32-32 5074-40-40 5074-48-48

G G G G G G G G G G G G G G

M M M M M M M M M M M M M M M M M M M M M M M M M

G G G G G G

1 1 1 1 1 1

G2

1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 5/8" 3/4" 3/4" 3/4" G 1" G 1" 1/4" 1/4" 1/4" 1/2" 1/2" 1/2" G 2" 1/2" G 3"

1 1 1 1

2

1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 3/8" 1/2" 5/8" 3/4" 5/8" 1/2" 3/4" 1" 3/4" 1" 1" 1/4" 1/2" 1/4" 1/2" 2" 2" 1/2" 3"

RSK no. 2174191 2174316 2174324 2174332 2174209 2174340 2174357 2174217 2174297 2174365 2174389 2174225 2174381 2174302 2174233 2174241 2174304 2174766 2174258 2174305 2174266 2174274 2174282

Product Group 506 Product Group 506

5073

5076

T-pipe, G F x G F x G F T

Sleeve, G F x G F

Brass Part number Thread 1 5073-02-02

G 1/8" F

x

2

G 1/8" F

x

3 RSK no.

G 1/8"F T 1984202

5073-04-04

G 1/4" F

G 1/4" F

G 1/4" F T 1984210

5073-06-06

G 3/8" F

G 3/8" F

G 3/8" F T 1984228

5073-08-08

G 1/2" F

G 1/2" F

G 1/2"F T 1984236

5073-12-12

G 3/4" F

G 3/4" F

G 3/4" F T 1984251

G 1" F

G 1" F

G 1" F T 1984277

5073-16-16 5073-20-20

G 1 1/4" F G 1 1/4" F G 1 1/4" F T 1984285

5073-24-24

G 1 1/2" F G 1 1/2" F G 1 1/2" F T 1984301

5073-32-32

G 2" F

G 2" F

PRODUCT CATALOGUE 2009

G 2" F T 1984319

Brass. T = turned, Dc = Die casted Part number

Thread 1

5076-02-02 5076-04-04 5076-06-06 5076-08-08 5076-12-12 5076-16-16 5076-20-20 5076-24-24 5076-32-32 5076-40-40 5076-48-48 5076-64-64

G G G G G

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3" G 4"

F F F F F F F F F F F F

x Thread 2

RSK no.

G 1/8" F T G 1/4" F T G 3/8" FT G 1/2" F T G 3/4" F Dc. G 1" F Dc. G 1 1/4" F Dc. G 1 1/2" F Dc. G2" F Dc. G 2 1/2" F Dc. G 3" F Dc. G 4" F Dc.

1988005 1988013 1988021 1988039 1988047 1988054 1988062 1988070 1988088 1988096 1988104 1988120

159

5


Hose couplings – Industry/Fuel/AC

Part number

Type

5077-00-02 5077-00-04 5077-00-06 5077-00-08 5077-00-12 5077-00-16 5077-00-20 5077-00-24 5077-00-32 5077-00-40 5077-00-48 5077-00-64

Plug Plug Plug Plug Plug Plug Plug Plug Plug Plug Plug Plug

product group 500 & 510

Product Group 506

Product Group 506

5077

5080

Plug, G M

Hose Coupling, G FS 90°

Brass. T = turned, Dc = Die casted

Brass. With finger nut.

T T T T T Dc Dc Dc Dc Dc. Dc Dc

Thread G G G G G

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3" G 4"

M M M M M M M M M M M M

RSK no.

Part number

Thread

Type Hose ID

8070005 8070013 8070021 8070039 8070047 8070054 8070062 8070070 8070088 8070096 8070097 8070098

5080-08-08 5080-12-06 5080-12-08

G 1/2" G 3/4" G 3/4"

FS 90° FS 90° FS 90°

RSK no.

1/2" 2174800 3/8" 2174820 1/2" 2174810

Product Group 506

5081 90° Elbow F – M Brass

Product Group 506

5078 Connector pipe Brass. For hose. Part number

Type

5078-04-04 5078-06-06 5078-08-08 5078-10-10 5078-12-12 5078-16-16

Connector Connector Connector Connector Connector Connector

pipe pipe pipe pipe pipe pipe

Hose ID

RSK no.

1/4" 3/8" 1/2" 5/8" 3/4" 1"

2175202 2175218 2175226 2175226 2175242 2175250

Part number

Thread 1

5081-02-02 G 1/8" 5081-04-04 G 1/4" 5081-06-06 G 3/8" 5081-08-08 G 1/2" 5081-12-12 G 3/4" 5081-16-16 G 1" 5081-20-20 G 1 1/4" 5081-24-24 G 1 1/2" 5081-32-32 G 2"

M M M M M M M M M

Type Thread 2 RSK no. 90F G 1/8" 90F G 1/4" 90F G 3/8" 90F G 1/2" 90F G 3/4" 90F G 1" 90F G 1 1/4" 90F G 1 1/2" 90F G 2"

F F F F F F F F F

1982800 1982818 1982826 1982834 1982859 1982875 1982883 1982909 1982917

Product Group 506

5082 Product Group 506

G F x G FS

5079

Brass

Hose Coupling, G FS Brass. With finger nut. Part number

Thread

Type Hose ID

5079-06-06 5079-08-06 5079-08-08 5079-12-08 5079-12-12 5079-16-08 5079-16-12 5079-16-16 5079-20-16 5079-20-20 5079-24-24 5079-32-32 5079-40-40 5079-48-48

G G G G G

FS FS FS FS FS FS FS FS FS FS FS FS FS FS

160

G1 G1 G1 G2

3/8" 1/2" 1/2" 3/4" 3/4" G 1" G 1" G 1" 1/4" 1/4" 1/2" G 2" 1/2" G 3"

3/8" 3/8" 1/2" 1/2" 3/4" 1/2" 3/4" 1" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3"

RSK no. 2174407 2174605 2174415 2174621 2174423 2174647 2174654 2174431 2174670 2174449 2174456 2174464 2174472 2174480

Part number

Thread 1

5082-04-04 5082-06-06 5082-08-08 5082-12-12 5082-16-16 5082-20-20 5082-24-24 5082-32-32

G G G G

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

F F F F F F F F

x Thread 2 G G G G

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

FS FS FS FS FS FS FS FS

RSK no. 1981018 1981026 1981034 1981059 1981075 1981083 1981109 1981117

PRODUCT CATALOGUE 2009


Product group 500 & 510

Part number

Thread 1

5083-02-04 5083-02-06 5083-04-06 5083-06-08 5083-08-12 5083-08-16 5083-12-16 5083-12-20 5083-16-20 5083-16-24 5083-20-24 5083-24-32

G G G G G G G G

1/8" 1/8" 1/4" 3/8" 1/2" 1/2" 3/4" 3/4" G 1" G 1" G 1 1/4" G 1 1/2"

M M M M M M M M M M M M

Hose couplings – Industry/Fuel/AC Product Group 506

Product Group 511

5083

5070~S

Bushing, G M x G F

Double nipple, G M x G M

Brass

Stainless steel AISI 316

x Thread 2 G G G G G

G G G G

1 1 1 1

1/4" 3/8" 3/8" 1/2" 3/4" G 1" G 1" 1/4" 1/4" 1/2" 1/2" G 2"

F F F F F F F F F F F F

RSK no.

Part number

Thread 1

1987007 1987023 1987015 1987049 1987072 1987098 1987106 1987122 1987130 1987162 1987163 1987502

5070-02-02S 5070-04-02S 5070-04-04S 5070-06-02S 5070-06-04S 5070-06-06S 5070-08-02S 5070-08-04S 5070-08-06S 5070-08-08S 5070-12-02S 5070-12-04S 5070-12-06S 5070-12-08S 5070-12-12S 5070-16-04S 5070-16-06S 5070-16-08S 5070-16-12S 5070-16-16S 5070-20-04S 5070-20-06S 5070-20-08S 5070-20-12S 5070-20-16S 5070-20-20S 5070-24-04S 5070-24-06S 5070-24-08S 5070-24-12S 5070-24-16S 5070-24-20S 5070-24-24S 5070-32-12S 5070-32-16S 5070-32-24S 5070-32-32S 5070-40-32S 5070-40-40S 5070-48-48S 5070-64-64S

G G G G G G G G G G G G G G G

Product Group 506

5084 90° Elbow F – F Brass. Part number

Thread 1

Type Thread 2 RSK no.

5084-02-02 5084-04-04 5084-04-08 5084-06-06 5084-06-08 5084-08-08 5084-08-12 5084-12-12 5084-16-16 5084-20-20 5084-24-24 5084-32-32

G G G G G G G G

90F G 1/8" 90F G 1/4" 90F G 1/2" 90F G 3/8" 90F G 1/2" 90F G 1/2" 90F G 3/4" 90F G 3/4" 90F G 1" 90F G 1 1/4" 90F G 1 1/2" 90F G 2"

1/8" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

F F F F F F F F F F F F

PRODUCT CATALOGUE 2009

F F F F F F F F F F F F

1982008 1982016 1982149 1982024 1982156 1982032 1982164 1982057 1982073 1982081 1982107 1982115

G G G G G G G G G G G G G

1 1 1 1 1 1 1 1 1 1 1 1 1

G2 G2

1/8" 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4" 3/4" G 1" G 1" G 1" G 1" G 1" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" G 2" G 2" G 2" G 2" 1/2" 1/2" G 3" G 4"

M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M

x

Thread 2 G G G G G G G G G G G G G G G G G G G

1/8" M 1/8" M 1/4" M 1/8" M 1/4" M 3/8" M 1/8" M 1/4" M 3/8" M 1/2" M 1/8" M 1/4" M 3/8" M 1/2" M 3/4" M 1/4" M 3/8" M 1/2" M 3/4" M G 1" M G 1/4"M G 3/8" M G 1/2"M G 3/4" M G 1"M G 1 1/4" M G 1/4" M G 3/8" M G 1/2" M G 3/4" M G 1" M G 1 1/4" M G 1 1/2" M G 3/4" M G 1" M G 1 1/2" M G 2" M G 2" M G 2 1/2" M G 3" M G 4" M

161

5


Hose couplings â&#x20AC;&#x201C; Industry/Fuel/AC

Part number 5071-04-02S 5071-06-02S 5071-06-04S 5071-08-02S 5071-08-04S 5071-08-06S 5071-12-02S 5071-12-04S 5071-12-06S 5071-12-08S 5071-16-04S 5071-16-06S 5071-16-08S 5071-16-12S 5071-20-08S 5071-20-12S 5071-20-16S 5071-24-08S 5071-24-12S 5071-24-16S 5071-24-20S 5071-32-12S 5071-32-16S 5071-32-20S 5071-32-24S 5071-40-16S 5071-40-20S 5071-40-24S 5071-40-32S 5071-48-08S 5071-48-12S 5071-48-16S 5071-48-20S 5071-48-24S 5071-48-32S 5071-48-40S 5071-64-08S 5071-64-12S 5071-64-16S 5071-64-20S 5071-64-24S 5071-64-32S 5071-64-40S 5071-64-48S

162

Thread 1 G G G G G G G G G G

G G G G G G G

G G G G

1 1 1 1 1 1 1

2 2 2 2

1/4" 3/8" 3/8" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4" G 1" G 1" G 1" G 1" 1/4" 1/4" 1/4" 1/2" 1/2" 1/2" 1/2" G 2" G 2" G 2" G 2" 1/2" 1/2" 1/2" 1/2" G 3" G 3" G 3" G 3" G 3" G 3" G 3" G 4" G 4" G 4" G 4" G 4" G 4" G 4" G 4"

M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M

product group 500 & 510

Product Group 511

Product Group 511

5071~S

5073~S

Bushing, G M x G F

T-pipe, G F x G F x G F

Stainless steel AISI 316

Stainless steel AISI 316

x

Thread 2 G 1/8" F G 1/8" F G 1/4" F G 1/8" F G 1/4" F G 3/8" F G 1/8" F G 1/4" F G 3/8" F G 1/2" F G 1/4" F G 3/8" F G 1/2" F G 3/4" F G 1/2"F G 3/4" F G 1"F G 1/2" F G 3/4" F G 1" F G 1 1/4" F G 3/4" F G 1" F G 1 1/4" F G 1 1/2" F G 1" F G 1 1/4" F G 1 1/2" F G 2" F G 1/2" F G 3/4" F G 1" F G 1 1/4" F G 1 1/2" F G 2" F G 2 1/2" F G 1/2" F G 3/4" F G 1" F G 1 1/4" F G 1 1/2" F G 2" F G 2 1/2" F G 3" F

Part number

Thread 1

5073-02-02S G 1/8" 5073-04-04S G 1/4" 5073-06-06S G 3/8" 5073-08-08S G 1/2" 5073-12-12S G 3/4" 5073-16-16S G 1" 5073-20-20S G 1 1/4" 5073-24-24S G 1 1/2" 5073-32-32S G 2" 5073-40-40S G 2 1/2" 5073-48-48S G 3"

x

F F F F F F F F F F F

2 G G G G G

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3"

F F F F F F F F F F F

x

3

G G G G G

F F F F F F F F F F F

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3"

Product Group 511

5074~S Hose nipple, G M Stainless steel AISI 316 Part number 5074-04-04S 5074-06-06S 5074-08-08S 5074-12-12S 5074-16-16S 5074-20-20S 5074-24-24S 5074-32-32S 5074-40-40S 5074-48-48S 5074-64-64S

Thread G G G G

1/4" 3/8" 1/2" 3/4" G 1" G1 1/4" G 1 1/2" G 2" G 2 1/2" G 3" G 4"

M M M M M M M M M M M

Hose ID 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"

Product Group 511

5076~S Bushing, G F Stainless steel AISI 316 Part number

Type

Hose ID

5076-02-02S 5076-04-04S 5076-06-06S 5076-08-08S 5076-12-12S 5076-16-16S 5076-20-20S 5076-24-24S 5076-32-32S 5076-40-40S 5076-48-48S 5076-64-64S

Bushing Bushing Bushing Bushing Bushing Bushing Bushing Bushing Bushing Bushing Bushing Bushing

G 1/8" M G 1/4" M G 3/8"M G 1/2"M G 3/4" M G 1" M G 1 1/4" M G 1 1/2" M G 2" M G 2 1/2" M G 3" M G 4" M

PRODUCT CATALOGUE 2009


Product group 500 & 510

Part number

Type

5077-00-02S 5077-00-04S 5077-00-06S 5077-08-08S 5077-00-12S 5077-00-16S 5077-00-20S 5077-00-24S 5077-00-32S 5077-00-40S 5077-00-48S

Plug Plug Plug Plug Plug Plug Plug Plug Plug Plug Plug

Hose couplings – Industry/Fuel/AC Product Group 506

Product Group 511

5077~S

5085~S

Plug Male, G M

45° Elbow F – F

Stainless steel AISI 316

Stainless steel AISI 316

Thread G G G G G

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3"

UF UF UF UF UF UF UF UF UF UF UF

Part number

Thread 1

Thread 2

5085-02-02S 5085-04-04S 5085-06-06S 5085-08-08S 5085-12-12S 5085-16-16S 5085-20-20S 5085-24-24S 5085-32-32S

G G G G G

G G G G G

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

F F F F F F F F F

45° 45° 45° 45° 45° 45° 45° 45° 45°

Product Group 511

5086~S

90° Elbow F – M

90° Pipe bend, G M – G M

Stainless steel AISI 316

Stainless steel AISI 316

Part number

Thread 1

Thread 2

Part number

Thread 1

5081-02-02S 5081-04-04S 5081-06-06S 5081-08-08S 5081-12-12S 5081-16-16S 5081-20-20S 5081-24-24S 5081-32-32S 5081-40-40S 5081-48-48S 5081-64-64S

G G G G G

G G G G G

5086-02-02S 5086-04-04S 5086-06-06S 5086-08-08S 5086-12-12S 5086-16-16S 5086-20-20S 5086-24-24S 5086-32-32S

G G G G G

F F F F F F F F F F F F

90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90°

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3" G 4"

M M M M M M M M M M M M

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

M M M M M M M M M

90° 90° 90° 90° 90° 90° 90° 90° 90°

Product Group 511

5087~S Straight bushing F, G F

Stainless steel AISI 316

Stainless steel AISI 316

Thread 1

Thread 2

Part number

Type

5084-02-02S 5084-04-04S 5084-06-06S 5084-08-08S 5084-12-12S 5084-16-16S 5084-20-20S 5084-24-24S 5084-32-32S 5084-40-40S 5084-48-48S

G G G G G

G G G G G

5087-02-02S 5087-04-04S 5087-06-06S 5087-08-08S 5087-12-12S 5087-16-16S 5087-20-20S 5087-24-24S 5087-32-32S 5087-40-40S 5087-48-48S 5087-64-64S

Straight Straight Straight Straight Straight Straight Straight Straight Straight Straight Straight Straight

PRODUCT CATALOGUE 2009

G 1/8"M G 1/4"M G 3/8"M G1/2"M G 3/4" M G 1" M G 1 1/4"M G 1 1/2" M G 2"M

90° Elbow F – F

Part number

F F F F F F F F F F F

Thread 2

Product Group 511

5084~S

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3"

F F F F F F F F F

Product Group 511

5081~S

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3" G 4"

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90°

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3"

F F F F F F F F F F F

Hose ID bushing bushing bushing bushing bushing bushing bushing bushing bushing bushing bushing bushing

G G G G G

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3" G 4"

F F F F F F F F F F F F

163

5


Hose couplings – Industry/Fuel/AC

Part number

Thread 1

5088-06-02S 5088-08-02S 5088-06-04S 5088-08-04S 5088-08-06S 5088-12-06S 5088-16-06S 5088-12-08S 5088-16-08S 5088-20-08S 5088-24-08S 5088-16-12S 5088-20-12S 5088-24-12S 5088-32-12S 5088-20-16S 5088-24-16S 5088-32-16S 5088-24-20S 5088-32-20S 5088-40-20S 5088-32-24S 5088-40-24S 5088-40-32S

G G G G G G

3/8" F 1/2" F 3/8" F 1/2" F 1/2" F 3/4" F G 1" F G 3/4" F G 1" F G 1 1/4" F G 1 1/2"F G 1" F G 1 1/4" F G 1 1/2" F G 2" F G 1 1/4" F G 1 1/2" F G 2" F G 1 1/2" F G 2" F G G 2 1/2" F G 2" F G 2 1/2" F G 2 1/2" F

product group 500 & 510

Product Group 511

Product Group 511

5088~S

5089-95~S

Bushing F – F

Plug Female, G F

Stainless steel AISI 316

Stainless steel AISI 316

x

Thread 2

Part number

Type

G G G G G G G G G G G G G G G

5089-95-04S 5089-95-06S 5089-95-08S 5089-95-12S 5089-95-16S 5089-95-20S 5089-95-24S 5089-95-32S 5089-95-40S 5089-95-48S 5089-95-64S

Plug Plug Plug Plug Plug Plug Plug Plug Plug Plug Plug

G1 1 G1 G1 G1

1/8"F 1/8"F 1/4"F 1/4"F 3/8"F 3/8"F 3/4"F 1/2"F 1/2"F 1/2"F 1/2"F 3/4"F 3/4"F 3/4"F 3/4"F G 1"F G 1"F G 1"F 1/4"F 1/4"F 1/4"F 1/2"F 1/2"F G 2"F

Product Group 511

Thread G G G G

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3" G 4"

F F F F F F F F F F F

Product Group 511

5089-96~S Nut, G F Stainless steel AISI 316 Part number

Type

5089-96-02S 5089-96-04S 5089-96-06S 5089-96-08S 5089-96-12S 5089-96-16S 5089-96-20S 5089-96-24S 5089-96-32S 5089-96-40S 5089-96-48S 5089-96-64S

Nut Nut Nut Nut Nut Nut Nut Nut Nut Nut Nut Nut

Thread G G G G G

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3" G 4"

F F F F F F F F F F F F

5089~S Cross tube F, G F Product Group 511

Stainless steel AISI 316 Part number

Type

5089-02-02S 5089-04-04S 5089-06-06S 5089-08-08S 5089-12-12S 5089-16-16S 5089-20-20S 5089-24-24S 5089-32-32S

Cross Cross Cross Cross Cross Cross Cross Cross Cross

164

5090-10~S

Threaded welding nipple, G M

Hose ID tube tube tube tube tube tube tube tube tube

G1/8" G1/4" G3/8" G1/2" G3/4" G1" G1 1/4" G1 1/2" G2"

F F F F F F F F F

Brass. For hose. Part number

OD tap

5090-10-04S 13.5 5090-10-06S 17.2 5090-10-08S 21.3 5090-10-12S 26.9 5090-10-16S 33.7 5090-10-20S 42.4 5090-10-24S 48.3 5090-10-32S 60.3 5090-10-40S 76.1 5090-10-48S 85.9 5090-10-64S 114.3

mm mm mm mm mm mm mm mm mm mm mm

Thickness 2.3 2.3 2.6 2.6 3.2 3.2 3.2 3.6 3.6 4.0 4.5

mm mm mm mm mm mm mm mm mm mm mm

Thread G G G G

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3" G 4"

M M M M M M M M M M M

PRODUCT CATALOGUE 2009


Product group 500 & 510

Hose couplings – Industry/Fuel/AC Product Group 511

Product Group 506

5090-20~S

5095

Nipple pipe M, G M

Petrol pump Coupling, male

Stainless steel AISI 316 Part number

Type

5090-20-04S 5090-20-06S 5090-20-08S 5090-20-12S 5090-20-16S 5090-20-20S 5090-20-24S 5090-20-32S 5090-20-40S 5090-20-48S 5090-20-64S

Nipple Nipple Nipple Nipple Nipple Nipple Nipple Nipple Nipple Nipple Nipple

Thread pipe pipe pipe pipe pipe pipe pipe pipe pipe pipe pipe

G G G G

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3" G 4"

M M M M M M M M M M M

Product Group 511

5090-30~S

Part number

Description

5095-16-13 5095-16-17

1" 1"

Hose 19–23 25–37

Product Group 506

5096 Petrol pump Coupling, female Part number

Description

5096-16-13 5096-16-17

1" 1"

Hose 19–23 25–37

Screw bushing M Product Group 506

Stainless steel AISI 316 Part number

Type

5090-30-06S 5090-30-08S 5090-30-12S 5090-30-16S 5090-30-20S 5090-30-24S 5090-30-32S 5090-30-40S 5090-30-48S

Screw Screw Screw Screw Screw Screw Screw Screw Screw

5096-16-99

Thread bushing bushing bushing bushing bushing bushing bushing bushing bushing

PRODUCT CATALOGUE 2009

G 3/8" M G 1/2" M G 3/4" M G 1" M G 1 1/4" M G 1 1/2" M G 2" M G 2 1/2" M G 3" M

Tool for Petrol pump Couplings Part number

Description

5096-16-99

1"

Hose 19–37

165

5


Hose couplings – Industry/Fuel/AC

product group 500 & 510

Product Group 506

Product Group 506

5555

5555

Casing for hose

Hose nipple

Brass

Brass

Part number

Connection

Hose ID

5555-41-08x1 5555-48-08x1 5555-53-12x1

1/2" Female 1/2" Female incl. valve 3/4" Female

1/2" 1/2" 3/4"

Part number

Connection

Hose ID

5555-43-08x1 5555-49-08x1 5555-51-12x1

1/2" Male 1/2" Male 3/4" Male

1/2" 3/4", 1/2" 3/4"

Product Group 506

Product Group 506

5555

5555

Coupling nipple, G-thread, male

Casing G-thread, Male Brass Part number

Connection

5555-60-08x1 5555-60-12x1

1/2" Female 1/2" Female

Part number

Connection

5555-40-08x1 5555-40-12x1 5555-40-22x1 5555-54-12x1 5555-65-01x1

1/2" 1/2" 1/2" 3/4" 3/8"

Thread 1/2" 3/4"

Brass Part number

Connection

5555-46-08x1 5555-46-12x1 5555-61-12x1 5555-61-08x1

1/2" 1/2" 3/4" 3/8"

Thread

Male Male Male Male

1/2" 3/4" 3/4" 3/4"

Product Group 506

Product Group 506

5555

5555

Casing G-thread, female

Coupling nipple, G-thread, female

Brass

Brass

Thread

Female 1/2" Female 3/4" Female 3/4", 1/2", M22 Female 3/4" Female excl. valve 3/8"

Part number

Connection

5555-44-08x1 5555-44-12x1 5555-55-08x1 5555-55-12x1 5555-65-02x1

1/2" 1/2" 3/4" 3/4" 3/8"

Thread

Male 1/2" Male 3/4", 1/2", M22x1 Male 1/2" Male 3/4" Male excl. valve 3/8"

Product Group 506

5555 Transition nipple, G-thread Male – M thread female Brass Part number 5555-47-08x1 5555-47-12x1

166

Thread 1

Thread2

1/2" M 3/4" M

3/4" F 1/2" F

PRODUCT CATALOGUE 2009


Product group 500 & 510

Part number

Description

5555-63-08x1 Nozzle pipe, adjustable

Hose couplings – Industry/Fuel/AC Product Group 506

Product Group 506

5555-63

5491-00

Nozzle pipe

Water gun, rubber cover

Adjustable

Adjustable, blue rubber cover

Connection

Part number

Description

1/2" Male

5491-00-04

Industry gun

Connection 1/2" F

Product Group 506

Part number

Description

5555-32-08x1 Nozzle pipe, adjustable

Product Group 506

5555-32

5555-33

Nozzle pipe

Water gun, ergo-dynamic

Adjustable

Adjustable, ergo-dynamic

Hose ID

Part number

Description

3/4", 1/2"

5555-33-08

Industry gun

Connection 1/2" Female

Product Group 506

5555-50 Water gun Adjustable, temp: 80°C Part number

Description

Connection

5555-50-08 5555-50-12 5555-50-99

Flush gun Flush gun, on/off-control Start-set Flush gun

1/2" Male 3/4" Male 1/2" Male

Product Group 506

5490-05 Hose holder Zinc Part number

Description

5490-05-01 5490-05-02

Hose holder zinc Hose holder zinc

Hose length (1/2") 30m 60m

Product Group 506

5491 Flush nozzle

PRODUCT CATALOGUE 2009

Part number

Description

5491-00-01 5491-00-02

Flush nozzle, industry Flush nozzle, food

Thread G 3/4" M G 3/4" M

167

5


Hose couplings – Industry/Fuel/AC

Part number

Type

5800-00-02 5800-00-03 5800-10-03 5800-10-02 5800-00-04 5800-10-04 5800-12-04 5800-00-05 5800-00-06 5800-10-06 5800-11-06 5800-10-08 5800-00-08 5800-00-09 5800-10-09 5800-00-10 5800-00-11 5800-00-12 5800-10-12 5800-00-13 5800-11-12 5800-00-14 5800-00-16 5800-11-16 5800-10-20 5800-00-20 5800-11-20 5800-00-25

Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule

NW NW NW NW NW NW NW NW NW NW NW NW NW NW NW NW NW NW NW NW NW NW NW NW NW NW NW NW

2 3 3 2 4 4 4 4 6 6 6 8 8 8 8 10 10 10 12 13 12 13 16 16 20 20 20 25

product group 500 & 510

Product Group 512

Product Group 512

5800

5801

LP hose Ferrule

G-threaded Nut

ID

Hole

Part number

Thread

Type

9.0 10.0 10.5 10.5 11.0 11.5 12.5 13.0 13.5 14.5 14.5 15.0 16.0 17.0 17.5 18.0 19.5 20.0 22.0 23.0 24.5 24.5 26.5 30.0 30.5 32.0 33.0 40.0

5.5 6.2 5.2 6.2 7.2 7.3 8.8 7.7 9.2 9.3 9.3 11.2 11.4 11.4 11.3 14.2 14.2 14.2 17.2 17.2 16.9 17.2 19.7 23.7 23.7 23.7 24.0 29.6

5801-02-03 5801-04-04 5801-04-06 5801-06-08 5801-08-10 5801-08-13 5801-12-16 5801-16-20

G G G G G G G

Nut Nut Nut Nut Nut Nut Nut Nut

1/8" 1/4" 1/4" 3/8" 1/2" 1/2" 3/4" G 1"

Dim. NW 3 NW 4 NW 6 NW 8 NW 10 NW 13 NW 16 NW 20 Product Group 512

5803 LP hose fitting, G-threaded, FS 90° Part number

Thread

Type

5803-02-03 5803-04-04 5803-04-06 5803-06-08 5803-08-10 5803-08-13 5803-12-16

G G G G G G G

FS FS FS FS FS FS FS

1/8" 1/4" 1/4" 3/8" 1/2" 1/2" 3/4"

90° 90° 90° 90° 90° 90° 90°

Hose ID NW 3 NW 4 NW 6 NW 8 NW 13/10 NW 13 NW 20/16 Product Group 512

5810 LP hose fitting, G-threaded, M flat

Description Hose ID mm NW NW NW NW NW NW NW NW NW

2 3 4 6 8 10 13 16 20

3–4 4–5 5–6 7–8 9–10 11–12 14–15 17–18 21–22

Part number

Thread

Type

5810-02-04 5810-04-04 5810-04-06 5810-06-08 5810-08-10 5810-08-13

G G G G G G

M M M M M M

1/8" 1/4" 1/4" 3/8" 1/2" 1/2"

Flat Flat Flat Flat Flat Flat

Hose ID NW 4 NW 4 NW 6 NW 8 NW 10 NW 13 Product Group 512

5820 LP hose fitting, M-threaded, SKL

168

Part number

Thread

Type

5820-10-03 5820-12-04 5820-14-06 5820-16-08 5820-18-10 5820-22-13

M M M M M M

SKL SKL SKL SKL SKL SKL

10 12 14 16 18 22

x x x x x x

1.0 1.5 1.5 1.5 1.5 1.5

5 6 8 10 12 15

Hose ID NW 3 NW 4 NW 6 NW 8 NW 10 NW 13

PRODUCT CATALOGUE 2009


Product group 500 & 510

Hose couplings – Industry/Fuel/AC Product Group 512

Product Group 512

5826

5829

LP hose fitting, stand pipe Part number

Pipe Ø

5826-04-02 5826-05-03 5826-06-04 5826-08-06 5826-10-08 5826-12-10 5826-15-13 5826-18-16 5826-22-20

4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 15 mm 18 mm 22mm

Type SP SP SP SP SP SP SP SP SP

M-threaded Nut

Hose ID

Part number

Thread

Type

Size

NW 2 NW 3 NW 4 NW 6 NW 8 NW 10 NW 13 NW 16 NW 20

5829-10-03 5829-12-04 5829-14-06 5829-16-08 5829-18-10 5829-22-13 5829-26-16

M M M M M M M

Nut Nut Nut Nut Nut Nut Nut

NW 3 NW 4 NW 6 NW 8 NW 10 NW 13 NW 16

10 12 14 16 18 22 26

x x x x x x x

1.0 1.5 1.5 1.5 1.5 1.5 1.5

Product Group 512

5830 LP hose fitting, m-threaded, M

Product Group 512

5827 LP hose fitting, stand pipe 90° Part number 5827-04-02 5827-05-03 5827-05-04 5827-06-04 5827-08-06 5827-10-08 5827-12-10 5827-15-13 5827-18-16 5827-22-20

Pipe Ø 4 5 5 6 8 10 12 15 18 22

mm mm mm mm mm mm mm mm mm mm

Type SP SP SP SP SP SP SP SP SP SP

Hose ID

90° 90° 90° 90° 90° 90° 90° 90° 90° 90°

NW 2 NW 3 NW 4 NW 4 NW 6 NW 8 NW 10 NW 13 NW 16 NW 20

Part number

Thread

Type

5830-10-02 5830-10-03 5830-12-04 5830-14-06 5830-16-08 5830-18-10 5830-22-13 5830-26-16 5830-30-20

M M M M M M M M M

M M M M M M M M M

10 10 12 14 16 18 22 26 30

x x x x x x x x x

1.0 1.0 1.5 1.5 1.5 1.5 1.5 1.5 2.0

Hose ID NW 2 NW 3 NW 4 NW 6 NW 8 NW 10 NW 13 NW 16 NW 20

Product Group 512

5831 LP hose fitting, m-threaded, 90°

Product Group 512

5828 LP hose fitting, stand pipe 45° Part number 5828-04-02 5828-05-03 5828-06-04 5828-08-06 5828-10-08 5828-12-10 5828-15-13 5828-18-16 5828-22-20

Pipe Ø 4 5 6 8 10 12 15 18 22

mm mm mm mm mm mm mm mm mm

PRODUCT CATALOGUE 2009

Type SP SP SP Sp SP SP SP Sp SP

45° 45° 45° 45° 45° 45° 45° 45° 45°

Hose ID NW 2 NW 3 NW 4 NW 6 NW 8 NW 10 NW 13 NW 16 NW 20

Part number

Thread

Type

5831-10-03 5831-12-04 5831-14-06 5831-16-08 5831-18-10 5831-22-13 5831-26-16 5831-30-20

M M M M M M M M

FS FS FS FS FS FS FS FS

10 12 14 16 18 22 26 30

x x x x x x x x

1.0 1.5 1.5 1.5 1.5 1.5 1.5 1.5

90° 90° 90° 90° 90° 90° 90° 90°

Hose ID NW 3 NW 4 NW 6 NW 8 NW 10 NW 13 NW 16 NW 20

169

5


Hose couplings – Industry/Fuel/AC

product group 500 & 510

Product Group 512

Part number

Thread

Type

5839-04-04 5839-04-06 5839-04-08 5839-06-04 5839-06-08

R R R R R

M M M M M

1/4" 1/4" 1/4" 3/8" 3/8"

5839

5884

LP hose fitting, R-threaded

Banjo, Metric

Hose ID

Part number

For bolt

Type

NW NW NW NW NW

5884-08-03 5884-08-04 5884-10-04 5884-10-06 5884-12-04 5884-12-06 5884-14-04 5884-14-06 5884-14-08 5884-16-08 5884-16-10 5884-18-08 5884-18-10 5884-18-13 5884-22-10 5884-22-13 5884-22-16 5884-26-20

M M M M M M M M M M M M M M M M M M

Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo

4 6 8 4 8

Product Group 512

5840 LP hose fitting, NPT-threaded Part number 5840-02-04 5840-04-06 5840-04-08 5840-06-04 5840-06-08 5840-06-10 5840-08-13

Thread NPT NPT NPT NPT NPT NPT NPT

1/8" 1/4" 1/4" 3/8" 3/8" 3/8" 1/2"

Product Group 512

Type

Hose ID

M M M M M M M

NW 4 NW 6 NW 8 NW 4 NW 8 NW 10 NW 13

8 8 10 10 12 12 14 14 14 16 16 18 18 18 22 22 22 26

Product Group 512

Part number

For bolt

Type

5882-08-03 5882-10-04 5882-12-06 5882-14-08 5882-16-10 5882-18-13 5882-22-16 5882-26-20

M M M M M M M M

Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo

8 x 1.0 10 x 1.0 12 x 1.5 14 x 1.5 16 x 1.5 18 x 1.5 22 x 1.5 26 x 1.5

90° 90° 90° 90° 90° 90° 90° 90°

Hose ID NW 3 NW 4 NW 4 NW 6 NW 4 NW 6 NW 4 NW 6 NW 8 NW 8 NW 10 NW 8 NW 10 NW 13 NW 10 NW 13 NW 16 NW 20

Product Group 512

5882

5885

Banjo, Metric 90°

Banjo bolt, M-threaded

Hose ID

Part number

Type

NW 3 NW 4 NW 6 NW 8 NW 10 NW 13 NW 16 NW 20

5885-00-08 5885-00-10 5885-00-12 5885-00-14 5885-00-16 5885-00-18 5885-00-22 5885-00-26

Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo

Thread bolt bolt bolt bolt bolt bolt bolt bolt

M 8x1.0 M 10x1.0 M 12x1.5 M 14x1.5 M 16x1.5 M 18x1.5 M 22x1.5 M 26x1.5

Product Group 512

5883 Product Group 512

Banjo, welding Part number

For bolt

Type

5883-08-04 5883-12-08 5883-14-08 5883-14-10 5883-16-10 5883-16-12 5883-18-10 5883-18-12 5883-22-18

M M M M M M M M M

Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo Banjo

170

8 12 14 14 16 16 18 18 22

5886 Banjo bolt, G-threaded

Ø Pipe 4 8 8 10 10 12 10 12 18

mm mm mm mm mm mm mm mm mm

Part number

Type

Thread

5886-00-02 5886-00-04 5886-00-06

Banjo bolt Banjo bolt Banjo bolt

G 1/8" G 1/4" G 3/8"

PRODUCT CATALOGUE 2009


Product group 500 & 510

Hose couplings – Industry/Fuel/AC Product Group 512

Product Group 512

5888

5891

Double banjo bolt for M-threaded

T Nipple

Fits 5884 Part number

Type

Thread

5888-00-08 5888-00-10 5888-00-12 5888-00-14 5888-00-16 5888-00-18

Double Double Double Double Double Double

banjo banjo banjo banjo banjo banjo

bolt bolt bolt bolt bolt bolt

M8 M10 M12 M14 M16 M18

x x x x x x

1,0 1,0 1,5 1,5 1,5 1,5

Part number

Type

Hose ID

5891-03-03 5891-04-04 5891-06-06 5891-08-08

T-Nipple T-Nipple T-Nipple T-Nipple

NW NW NW NW

3-3-3 4-4-4 6-6-6 8-8-8

5 Product Group 512

Product Group 512

5889

5898

Banjo, DIN 7641

Double Banjo

60° female

Part number 5889-10-04 5889-12-06 5889-14-08 5889-16-08 5889-16-10 5889-18-13

For bolt M M M M M M

Type

10 12 14 16 16 18

Banjo Banjo Banjo Banjo Banjo Banjo

Thread M M M M M M

12 14 16 16 18 22

x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5

Part number

For bolt

5898-08-03 5898-10-04 5898-12-06 5898-14-08 5898-16-10

M 8 M 10 M 12 M 14 M 16

Type Double Double Double Double Double

Hose ID banjo banjo banjo banjo banjo

NW 3 NW 4 NW 6 NW 8 NW 10

Product Group 512

5890 Nipple Part number

For nut

5890-03-03 5890-04-03 5890-04-04 5890-04-06 5890-06-04 5890-06-06 5890-08-04 5890-08-06 5890-08-08 5890-10-08 5890-10-10 5890-13-10 5890-13-13 5890-20-20

M M M M M M M M M M M M M M

10 12 12 12 14 14 16 16 16 18 18 22 22 30

/ / / / / / / / / / / / / /

G G G G G G G G G G G G G G

PRODUCT CATALOGUE 2009

Hose ID 1/8" 1/4" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 1"

NW 3 NW 3 NW 4 NW 6 NW 4 NW 6 NW 4 NW 6 NW 8 NW 8 NW 10 NW 10 NW 13 NW 20

171


Hose couplings â&#x20AC;&#x201C; Industry/Fuel/AC Product Group 512

Product Group 512

5860

5865

LP hose fitting, G-threaded, F

LP hose fitting, G-threaded, M

For two hose clamps.

According to the Marine Department

Part number

Thread

Type

5860-02-04 5860-04-04 5860-04-05 5860-04-06 5860-04-08 5860-06-06 5860-06-08 5860-06-10 5860-08-08 5860-08-10 5860-08-12 5860-12-08 5860-12-12 5860-12-16 5860-16-16 5860-16-20 5860-20-20 5860-20-24 5860-20-32 5860-24-20 5860-24-24 5860-24-32

G G G G G G G G G G G G G G

F F F F F F F F F F F F F F F F F F F F F F

G G G G G G

1 1 1 1 1 1

product group 500 & 510

1/8" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" G 1" G 1" 1/4" 1/4" 1/4" 1/2" 1/2" 1/2"

For two hose clamps.

According to the Marine Department

Hose ID

Part number

Thread

Type

1/4" 1/4" 5/16" 3/8" 1/2" 3/8" 1/2" 5/8" 1/2" 5/8" 3/4" 1/2" 3/4" 1" 1" 1 1/4" 1 1/4" 1 1/2" 2" 1 1/4" 1 1/2" 2"

5865-02-04 5865-04-04 5865-04-05 5865-04-06 5865-04-08 5865-06-05 5865-06-06 5865-06-08 5865-06-10 5865-08-08 5865-08-10 5865-08-12 5865-12-08 5865-12-12 5865-12-16 5865-16-12 5865-16-16 5865-16-20 5865-20-20 5865-20-24 5865-20-32 5865-24-20 5865-24-24 5865-24-32 5865-32-32 5865-32-40

G G G G G G G G G G G G G G G

M M M M M M M M M M M M M M M M M M M M M M M M M M

G G G G G G

1 1 1 1 1 1

1/8" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" G 1" G 1" G 1" 1/4" 1/4" 1/4" 1/2" 1/2" 1/2" G 2" G 2"

Hose ID 1/4" 1/4" 5/16" 3/8" 1/2" 5/16" 3/8" 1/2" 5/8" 1/2" 5/8" 3/4" 1/2" 3/4" 1" 3/4" 1" 1 1/4" 1 1/4" 1 1/2" 2" 1 1/4" 1 1/2" 2" 2" 2 1/2"

Marine hoses see chapter 1:4

Fire approved fuel hoses for commercial ships and recreation boats Exhaust gas hoses Decontimination hoses Food hoses

172

PRODUCT CATALOGUE 2009


Product group 500 & 510

Part number 5701-10-05 5701-12-06 5701-14-08 5701-14-10

Part number 5702-10-05 5702-12-06 5702-14-08 5702-14-10

Part number 5703-10-05 5703-12-06 5703-14-08 5703-14-10

Thread 5/8"-18 3/4"-16 7/8"-14 7/8"-14

UNF UNF UNF UNF

Product Group 512

5701

5705

UN FS with O-ring

UN 45° FS with O-ring

For AC hose 1445

For AC hose 1445

Type FS FS FS FS

AC AC AC AC

06 08 10 12

Hose ID

Part number

5/16" 13/32" 1/2" 5/8"

5705-10-05 5705-12-06 5705-14-08 5705-14-10

Thread 5/8"-18 3/4"-16 7/8"-14 7/8"-14

UNF UNF UNF UNF

Type 45° 45° 45° 45°

FS FS FS FS

5704-10-05 5704-12-06 5704-14-08 5704-14-10

AC AC AC AC

06 08 10 12

5/16" 13/32" 1/2" 5/8"

5702

5706

UN FS with O-ring/Valve

UN 45° FS with O-ring/Valve

For AC hose 1445

For AC hose 1445

UNF UNF UNF UNF

UNF UNF UNF UNF

Type FS FS FS FS

AC AC AC AC

06 08 10 12

Hose ID

Part number

5/16" 13/32" 1/2" 5/8"

5706-10-05 5706-12-06 5706-14-08 5706-14-10

Thread 5/8"-18 3/4"-16 7/8"-14 7/8"-14

UNF UNF UNF UNF

Type 45° 45° 45° 45°

Hose ID

FS FS FS FS

AC AC AC AC

06 08 10 12

5/16" 13/32" 1/2" 5/8"

Product Group 512

Product Group 512

5703

5707

UN 90° FS with O-ring

UN 90°T FS with O-ring

For AC hose 1445

For AC hose 1445

Type 90° 90° 90° 90°

FS FS FS FS

AC AC AC AC

06 08 10 12

Hose ID

Part number

5/16" 13/32" 1/2" 5/8"

5707-10-05 5707-12-06 5707-14-08 5707-14-10

Thread 5/8"-18 3/4"-16 7/8"-14 7/8"-14

UNF UNF UNF UNF

Type 90°T 90°T 90°T 90°T

Product Group 512

Part number

Hose ID

Product Group 512

Thread 5/8"-18 3/4"-16 7/8"-14 7/8"-14

Product Group 512

Product Group 512

Thread 5/8"-18 3/4"-16 7/8"-14 7/8"-14

Hose couplings – Industry/Fuel/AC

Hose ID FS FS FS FS

AC AC AC AC

06 5/16" 08 13/32" 10 1/2" 12 5/8"

Product Group 512

5704

5708

UN 90° FS with O-ring/valve

UN 90°T FS with O-ring/valve

For AC hose 1445

For AC hose 1445

Thread 5/8"-18 3/4"-16 7/8"-14 7/8"-14

UNF UNF UNF UNF

PRODUCT CATALOGUE 2009

Type 90° 90° 90° 90°

FS FS FS FS

Hose ID AC AC AC AC

06 08 10 12

5/16" 13/32" 1/2" 5/8"

Part number

Thread

5708-10-05 5/8"-18 UNF

Type

Hose ID

90°T FS AC 06 5/16"

173

5


Hose couplings – Industry/Fuel/AC

Part number

Thread

Part number

Product Group 512

5741

5746

UN MS with O-ring

UN 45° MS with O-ring/valve

For AC hose 1445

For AC hose 1445

Hose ID

MS AC 06 MS AC 08 MS AC 10

5/16" 13/32" 1/2"

Part number

Thread

Type

5746-10-05 5/8"-18 UNF 5746-12-06 3/4"-18 UNS 5746-14-08 7/8"-18 UNS

45° MS AC 06 5/16" 45° MS AC 08 13/32" 45° MS AC 10 1/2"

Product Group 512

5743

5760

UN 90° MS with O-ring

Hose connector

For AC hose 1445

For AC hose 1445

Thread

Type

Hose ID

90° MS AC 06 5/16" 90° MS AC 08 13/32" 90° MS AC 10 1/2"

Part number 5760-05-05 5760-06-06 5760-08-08 5760-10-10

Hose ID Type 5/16" 13/32" 1/2" 5/8"

AC AC AC AC

Hose Hose Hose Hose

connector connector connector connector

5/16" 13/32" 1/2" 5/8"

Product Group 512

5744

5761

UN 90° MS with O-ring/valve

Hose connector with valve

For AC hose 1445

For AC hose 1445

Thread

Type

Hose ID

90° MS AC 06 5/16" 90° MS AC 08 13/32"

Part number 5761-05-05 5761-06-06 5761-08-08 5761-10-10

Hose ID Type 5/16" 13/32" 1/2" 5/8"

AC AC AC AC

Hose Hose Hose Hose

Product Group 512

Hose ID connector connector connector connector

5/16" 13/32" 1/2" 5/8"

Product Group 512

5745

5764

UN 45° MS with O-ring

AC O-ring

For AC hose 1445

For AC couplings

Thread

5745-10-05 5/8"-18 UNF 5745-12-06 3/4"-18 UNS 5745-14-08 7/8"-18 UNS

174

Hose ID

Product Group 512

5744-10-05 5/8"-18 UNF 5744-12-06 3/4"-18 UNS

Part number

Hose ID

Product Group 512

5743-10-05 5/8"-18 UNF 5743-12-06 3/4"-18 UNS 5743-14-08 7/8"-18 UNS

Part number

Product Group 512

Type

5741-10-05 5/8"-18 UNF 5741-12-06 3/4"-18 UNS 5741-14-08 7/8"-18 UNS

product group 500 & 510

Type

Hose ID

Part number

Description

45° MS AC 06 5/16" 45° MS AC 08 13/32" 45° MS AC 10 1/2"

5764-00-10 5764-00-12 5764-00-14

O-ring for AC coupling O-ring for AC coupling O-ring for AC coupling

Hose ID 5/8" 3/4" 7/8"

PRODUCT CATALOGUE 2009


HYDROSCAND hose clamps

Hose clamps

Table of contents

Hose clamps page

5561 5561-00 5568 5565 5567 5566 5567-50 5001-15 5560 5001-05 5001-06 5562 5420 5420-01 5420-03 5562-81 5562-82 5562-83 5562-84 5562-85 5562-86

Hose clamp Hose clamp, mini Hose clamp Hose clamp Hose clamp Hose clamp Super clamp Hose clamp for compressed air fittings Round bolt clamp Hose clamp for compressed air fittings Hose clamp safety for compressed air fittings Rubber clamp Tool for hose clamp Hose clamp AISI 304 Hose clamp lock AISI 304 Pipe clamp, zinc Pipe clamp, zinc Pipe clamp, zinc Pipe clamp, zinc Pipe clamp, zinc Pipe clamp, zinc

Product group 510 Today, there are great demands for hoses and couplings fitted in a safe and practical way. Hydroscand offers a large variety of different hose clamps â&#x20AC;&#x201C; everything from the seashell-designed clamp for small areas to the powerful clamps used for large areas. Hydroscand also offers a wide range of solutions for fixed installations such as pipes and cables. Most of the clamps are available in different materials and designs to fit most installations.

176 176 176 177 177 177 177 178 178 178 178 178 179 179 179 180 180 180 180 180 180

Hydroscand reserves the right to modify any or all parts of this catalogue without any prior notice.

PRODUCT CATALOGUE 2009

175

5:01


Hydroscand hose clamps

product group 510

5568

5561

Hose clamp

Hose clamp

Part number

Dimension range

5561-08-14 5561-11-17 5561-13-20 5561-15-24 5561-19-28 5561-22-32 5561-26-38 5561-32-44 5561-38-50 5561-44-56 5561-50-65 5561-58-75 5561-68-85 5561-77-95 5561-91-12 5561-91-38 5561-91-65 5561-91-80 5561-92-05 5561-92-31 5561-92-56 5561-92-82 5561-93-07

8–14 11–17 13–20 15–24 19–28 22–32 26–38 32–44 38–50 44–56 50–65 58–75 68–85 77–95 87–112 104–138 130–165 150–180 175–205 200–231 226–256 251–282 227–307

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

According to DIN 3017

Band width

Part number

9 9 9 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12

5568-08-16 5568-12-22 5568-16-27 5568-25-40 5568-30-45 5568-40-60 5568-50-70 5568-60-80 5568-70-90 5568-01-00 5568-01-10 5568-01-20 5568-01-30 5568-01-40 5568-01-50 5568-01-60

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Dimension range 8–16 12–22 16–27 25–40 30–45 40–60 50–70 60–80 70–90 80–100 90–110 100–120 110–130 120–140 130–150 140–160

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Band width 9 9 12 12 12 12 12 12 12 12 12 12 12 12 12 12

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

5561-00 Hose clamp, mini Band width 12 mm Part number

Description Dim. range

5561-00-08 5561-00-09 5561-00-10 5561-00-11 5561-00-12 5561-00-13 5561-00-14 5561-00-15 5561-00-16 5561-00-17

Mini Mini Mini Mini Mini Mini Mini Mini Mini Mini

176

clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp

6-8 7-9 8-10 9-11 10-12 11-13 12-14 13-15 14-16 15-17

mm mm mm mm mm mm mm mm mm mm

Band width 12 12 12 12 12 12 12 12 12 12

mm mm mm mm mm mm mm mm mm mm

PRODUCT CATALOGUE 2009


Product group 510

Hydroscand hose clamps

5565

5566

Hose clamp

Hose clamp

PC 20-1, simple. Band width 20 mm

PC 20-2, double. Band width 20 mm

Part number

Description

5565-00-35 5565-00-40 5565-00-45 5565-00-55 5565-00-60 5565-00-65 5565-00-70 5565-00-75 5565-00-80 5565-00-85 5565-00-90 5565-00-95 5565-01-00 5565-01-05 5565-01-10 5565-01-15 5565-01-20 5565-01-25 5565-01-30 5565-01-35

PC PC PC PC PC PC PC PC PC PC PC PC PC PC PC PC PC PC PC PC

20-1 20-1 20-1 20-1 20-1 20-1 20-1 20-1 20-1 20-1 20-1 20-1 20-1 20-1 20-1 20-1 20-1 20-1 20-1 20-1

Dim. range Band width 30–36 35–41 40–46 50–56 55–61 60–66 65–71 70 -76 75–81 80–86 85–91 90–96 95–101 100–106 105–111 110–116 115–121 120–126 125–131 130–136

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

5567 Hose clamp PC 25-2, double. Band width 25 mm Part number

Description

5567-00-70 5567-00-75 5567-00-80 5567-00-85 5567-00-90 5567-00-95 5567-01-00 5567-01-05 5567-01-10 5567-01-15 5567-01-20 5567-01-25 5567-01-30 5567-01-35 5567-01-40 5567-01-45 5567-01-50 5567-01-55 5567-01-60 5567-01-65 5567-01-70 5567-01-80 5567-01-95 5567-02-00 5567-02-10

PC PC PC PC PC PC PC PC PC PC PC PC PC PC PC PC PC PC PC PC PC PC PC PC PC

25-2 25-2 25-2 25-2 25-2 25-2 25-2 25-2 25-2 25-2 25-2 25-2 25-2 25-2 25-2 25-2 25-2 25-2 25-2 25-2 25-2 25-2 25-2 25-2 25-2

PRODUCT CATALOGUE 2009

Dim. range Band width 61–71 66–76 71–81 76–86 81–91 86–96 91–101 96–106 101–111 106–116 111–121 116–126 121–131 126–136 131–141 136–146 141–151 146–156 151–161 156–166 161–171 171–181 180–195 191–201 201–211

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Part number

Description

Dim. range Band width

5566-00-50 5566-00-55 5566-00-60 5566-00-65 5566-00-70 5566-00-80

PC PC PC PC PC PC

41–51 46–56 51–61 56–66 61–71 71–80

20-2 20-2 20-2 20-2 20-2 20-2

mm mm mm mm mm mm

20 20 20 20 20 20

mm mm mm mm mm mm

5567-50 Super clamp

Part number

Description

5567-50-19 5567-50-22 5567-50-25 5567-50-28 5567-50-31 5567-50-35 5567-50-39 5567-50-43 5567-50-47 5567-50-51 5567-50-55 5567-50-59 5567-50-63 5567-50-67 5567-50-73 5567-50-79 5567-50-85 5567-50-91 5567-50-97 5567-51-03 5567-51-12 5567-51-21 5567-51-30 5567-51-39 5567-51-48 5567-51-61 5567-51-74 5567-51-87 5567-52-00 5567-52-13 5567-52-26 5567-52-39 5567-52-52

Super Super Super Super Super Super Super Super Super Super Super Super Super Super Super Super Super Super Super Super Super Super Super Super Super Super Super Super Super Super Super Super Super

clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp

Dim. range Band width 17–19 20–22 23–25 26–28 29–31 32–35 36–39 40–43 44–47 48–51 52–55 56–59 60–63 64–67 68–73 74–79 80–85 86–91 92–97 98–103 104–112 113–121 122–130 131–139 140–148 149–161 162–174 175–187 188–200 201–213 214–226 227–239 240–252

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

18 18 18 18 20 20 20 20 22 22 22 22 22 22 24 24 24 24 24 24 24 24 24 26 26 26 26 26 26 26 26 26 26

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

177

5:01


Hydroscand hose clamps

product group 510 5001-15

5001-05

Hose clamp for compressed air fittings

Hose clamp for compressed air fittings

With loose saddles Part number

Description

5001-15-01 5001-15-02 5001-15-03 5001-15-04 5001-15-05 5001-15-06 5001-15-07 5001-15-08 5001-15-09 5001-15-10

Hose Hose Hose Hose Hose Hose Hose Hose Hose Hose

Dim. range

clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp

17–22 20–29 28–35 32–40 39–49 48–60 60–76 77–94 94–115 115–145

mm mm mm mm mm mm mm mm mm mm

Part number

Description

5001-05-01 5001-05-02 5001-05-03 5001-05-04 5001-05-05 5001-05-06 5001-05-07 5001-05-08 5001-05-09

Hose Hose Hose Hose Hose Hose Hose Hose Hose

Dim. range

clamp clamp clamp clamp clamp clamp clamp clamp clamp

17–2 22–29 27–32 32–37 39–49 48–60 60–76 77 –94 94–115

mm mm mm mm mm mm mm mm mm

5001-06 Hose clamp safety for compressed air fittings

5560 Round bolt clamp

Part number

Description

5560-00-36 5560-00-46 5560-00-54 5560-00-62 5560-00-69 5560-00-74 5560-00-81 5560-00-88 5560-00-94 5560-00-98 5560-01-05 5560-01-16 5560-01-23 5560-01-32 5560-01-40 5560-01-50 5560-01-62 5560-01-70 5560-01-88 5560-02-04 5560-02-15 5560-02-31 5560-02-40 5560-02-55 5560-02-78

Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round

178

bolt bolt bolt bolt bolt bolt bolt bolt bolt bolt bolt bolt bolt bolt bolt bolt bolt bolt bolt bolt bolt bolt bolt bolt bolt

clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp

Dim. range 32–36 40–46 46–54 55–62 62–69 69–74 74–81 82–88 87–94 89–98 97–105 106–116 113–123 123–132 131–140 140–150 151–162 160–170 175–188 189–204 205–215 218–231 230–240 240–255 262–278

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Part number

Description

Dim. range

5001-06-03 5001-06-04 5001-06-06

Hose clamp safety Hose clamp safety Hose clamp safety

28–32 mm 35–42 mm 45–53 mm

5562 Rubber clamp Band width 12.7 mm Part number

Description

5562-00-02 5562-00-03 5562-00-04 5562-00-05 5562-00-06 5562-00-07 5562-00-08 5562-00-09 5562-00-10 5562-00-11 5562-00-12 5562-00-13 5562-00-14 5562-00-15 5562-00-16 5562-00-17 5562-00-18 5562-00-19 5562-00-20 5562-00-21 5562-00-23 5562-00-24 5562-00-25 5562-00-27 5562-00-28 5562-00-29 5562-00-30

Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber

clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp

Dim. Band width 3 5 6 8 10 11 13 14 16 18 19 21 22 24 25 27 29 30 32 33 36 38 45 51 54 64 74

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

PRODUCT CATALOGUE 2009


Product group 510

Hydroscand hose clamps

5420

5420-01

Tool for hose clamp

Hose clamp AISI 304

Part number

Description

Part number Description

Band width Length/coil

5420-00-00

Tool for hose clamp

5420-01-08 Hose clamp stainless 5420-01-12 Hose clamp stainless

1/2" 3/4"

30 m 30 m

5420-03 Hose clamp lock AISI 304 Part number Description

PRODUCT CATALOGUE 2009

Band width

No./pack

5420-03-08 Hose clamp lock stainless 1/2" 5420-03-12 Hose clamp lock stainless 3/4"

100 100

179

5:01


Hydroscand hose clamps

Part number 5562-81-04 5562-81-05 5562-81-06 5562-81-07 5562-81-08 5562-81-10 5562-81-12 5562-81-15 5562-81-18 5562-81-20 5562-81-22

Part number 5562-82-05 5562-82-06 5562-82-07 5562-82-08 5562-82-10 5562-82-12 5562-82-15 5562-82-18 5562-82-20 5562-82-22

Part number 5562-83-04 5562-83-05 5562-83-06 5562-83-07 5562-83-08 5562-83-10 5562-83-12 5562-83-15 5562-83-18 5562-83-20 5562-83-22

180

product group 510

5562-81

5562-84

Pipe clamp, zinc

Pipe clamp, zinc

BSL type 512. DIN 72573. 1 pipe

BSL type 512. DIN 72573. 4 pipe

Pipe diameter 4 5 6 7 8 10 12 15 18 20 22

mm mm mm mm mm mm mm mm mm mm mm

No. pipes

Part number

1 1 1 1 1 1 1 1 1 1 1

5562-84-04 5562-84-05 5562-84-06 5562-84-07 5562-84-08 5562-84-10 5562-84-12 5562-84-15 5562-84-18

Pipe diameter 4 5 6 7 8 10 12 15 18

mm mm mm mm mm mm mm mm mm

No. pipes 4 4 4 4 4 4 4 4 4

5562-82

5562-85

Pipe clamp, zinc

Pipe clamp, zinc

BSL type 512. DIN 72573. 2 pipes

BSL type 512. DIN 72573. 5 pipes

Pipe diameter 5 6 7 8 10 12 15 18 20 22

mm mm mm mm mm mm mm mm mm mm

No. pipes

Part number

2 2 2 2 2 2 2 2 2 2

5562-85-04 5562-85-05 5562-85-06 5562-85-07 5562-85-08 5562-85-10 5562-85-12

Pipe diameter 4 5 6 7 8 10 12

mm mm mm mm mm mm mm

No. pipes 5 5 5 5 5 5 5

5562-83

5562-86

Pipe clamp, zinc

Pipe clamp, zinc

BSL type 512. DIN 72573. 3 pipes

BSL type 512. DIN 72573. 6 pipes

Pipe diameter 4 5 6 7 8 10 12 15 18 20 22

mm mm mm mm mm mm mm mm mm mm mm

No. pipes

Part number

3 3 3 3 3 3 3 3 3 3 3

5562-86-04 5562-86-05 5562-86-06 5562-86-07 5562-86-08 5562-86-10

Pipe diameter 4 5 6 7 8 10

mm mm mm mm mm mm

No. pipes 6 6 6 6 6 6

PRODUCT CATALOGUE 2009


HYDROSCAND ACCESSORIES

Table of contents

Product group 505

Accessories This product group includes products that complement Hydroscand's range of hoses and fluid connectors, for example: – Hose protection from external ab, comes in several designs. – Web slings and cargo lashing equip. for safer transportation and lifts. – Straps and cable ties for the hose package. – Hose reels for safe and rational hose handling. Hydroscand also offers lubricating equipment, fluids for thread sealing, flange sealing, oils and grease.

5905 Cambuckle Strap 5906 Cable Tie 5521 Steel Spiral 5523 Plastic Spiral 5524 Hose Protection 5526 Hose Protection 5524-00-001 Complete Hose Protection Rack 5526-6 Textile Hose Protection 5526-7 Sealable Textile Hose Protection 5525 Fire Sleeve For Hose 5528 Stainless Steel Braid 5527 Crimp Hose PVC 5770 Rubber Protection for cleaning hoses 5528-10 / 5528-20 Support Plait Single / Open 5490 Suction Strainer 5528 Whipcheck 5490-10 Non-Return Valve, Brass 5490-20 Foot-Valve Brass With Strainer 5531-00 Protection Plug – UNF M 5530-01 Protection Plug – Tapered 5531-01 Protection Cap – UNF F 5532-03 Protection Plug – KS 5534-03/06 Protection Cap - SAE Flange 5533-00 Protection Plug – G M 5533-01 Protection Cap – G F 5660-30 Thread Sealtread Lockflange Seal etc 5650 Thread Tape 8258 Premium Hi-Temp Lubricant 825x Oil 5902 Grease Equipment 54xx Hose Reels 5601-00 Assortment Boxs 5995 Enviromental Oil Plug

5601 5610 5620

PRODUCT CATALOGUE 2009

Accessories page 182 182 182 182 182 183 183 183 183 184 184 184 184 184 184 184 185 185 185 185 185 186 186 186 186 186 186 187 187 187 187 188 188

O-rings and seals page Steel Bonded Steel Washer O-Rings Copper Plate

188 189 189

181

5:05


ACCESSORIES

product group 505 5523

5905

Plastic spiral

Cambuckle strap

Part no.

Description

5905-04-05 5905-04-07 5905-04-10 5905-04-20

Cambuckle Cambuckle Cambuckle Cambuckle

Length

strap strap strap strap

500 750 1000 2000

mm mm mm mm

Black, flat Hose and cable protection Part no.

Description

5523-00-06 5523-00-09 5523-00-19 5523-00-25

Plastspiral Plastspiral Plastspiral Plastspiral

ID 6.4 12.7 19.0 25.0

Part no.

Description Length

Width

pcs/pack

5906-00-09 5906-00-15 5906-00-19 5906-00-20 5906-00-27 5906-00-38

Cable Cable Cable Cable Cable Cable

tie tie tie tie tie tie

95 150 200 200 300 385

2.5 3.5 3.5 4.6 4.6 7.6

200 100 100 100 100 100

st st st st st st

5906-00-39 5906-00-45 5906-00-53 5906-00-55 5906-00-75

Cable Cable Cable Cable Cable

tie tie tie tie tie

385 450 533 540 755

4.6 7.6 8.9 13.0 7.6

100 100 100 50 50

st st st st st

5521 Steel spiral Flat Only available in whole meters Part no.

Description

5521-00-13 5521-00-15 5521-00-17 5521-00-19 5521-00-23 5521-00-26

Steel Steel Steel Steel Steel Steel

spiral spiral spiral spiral spiral spiral

13 15 17 19 23 26

mm mm mm mm mm mm

5521-00-29 5521-00-34 5521-00-41 5521-00-48 5521-00-54

Steel Steel Steel Steel Steel

spiral spiral spiral spiral spiral

29 34 41 48 54

mm mm mm mm mm

182

ID

1.2 1.6 1.6 2.4

mm mm mm mm

5524

5906 Cable tie

mm mm mm mm

Thickness

Hose protection Yellow, flat The hose protection will crimp during storage and tranportation, but will stretch to the right dimension during assembly. Part no.

Hose dim.

5524-00-016 11 - 17 5524-00-020 17 - 21 5524-00-025 21 - 27 5524-00-032 27 - 35 5524-00-040 35 - 42 5524-00-050 42 - 58 5524-00-075 58 - 70 5524-00-090 70 - 90 5524-00-110 90 - 115 5524-00-140 115 - 135 5524-00-160 135 - 165 5524-00-200 165 - 220

Length

mm mm mm mm mm mm mm mm mm mm mm mm

6 6 6 6 6 6 6 6 6 6 6 6

m m m m m m m m m m m m

Thickness Colour 1.6 2.0 2.5 2.5 3.0 3.0 4.0 4.5 5.0 5.5 5.5 5.5

mm mm mm mm mm mm mm mm mm mm mm mm

Yellow Yellow Yellow Yellow Yellow Yellow Yellow Yellow Yellow Yellow Yellow Yellow

5524-25-040 5524-25-050

35 - 42 mm 25 m 42 - 58 mm 25 m

3.0 mm Yellow 3.0 mm Yellow

5524-50-016 5524-50-020 5524-50-025 5524-50-032

11 17 21 27

-

17 21 27 35

mm mm mm mm

50 50 50 50

m m m m

1.6 2.0 2.5 2.5

mm mm mm mm

Yellow Yellow Yellow Yellow

5524-10-016 11 - 17 5524-10-020 17 - 21 5524-10-025 21 - 27 5524-10-032 27 - 35 5524-10-040 35 - 42 5524-10-050 42 - 58 5524-10-075 58 - 70 5524-10-090 70 - 90 5524-10-110 90 - 115 5524-10-140 115 - 135 5524-10-160 135 - 165 5524-10-200 165 - 220

mm mm mm mm mm mm mm mm mm mm mm mm

1 1 1 1 1 1 1 1 1 1 1 1

m m m m m m m m m m m m

1.6 2.0 2.5 2.5 2.5 3.0 4.0 4.5 5.0 5.5 5.5 5.5

mm mm mm mm mm mm mm mm mm mm mm mm

Yellow Yellow Yellow Yellow Yellow Yellow Yellow Yellow Yellow Yellow Yellow Yellow

PRODUCT CATALOGUE 2009


Product group 505

ACCESSORIES 5526

5524-00-001

Hose protection

Complete hose protection rack

Black, flat The hose protection will crimp during storage and tranportation, but will stretch to the right dimension during assembly. Part no.

Hose dim.

5526-00-016 11 - 17 5526-00-020 17 - 21 5526-00-025 21 - 27 5526-00-032 27 - 35 5526-00-040 35 - 42 5526-00-050 42 - 58 5526-00-075 58 - 70 5526-00-090 70 - 90 5526-00-110 90 - 115 5526-00-140 115 - 135 5526-00-160 135 - 165 5526-00-200 165 - 220

Length

mm mm mm mm mm mm mm mm mm mm mm mm

6 6 6 6 6 6 6 6 6 6 6 6

m m m m m m m m m m m m

Thickness Colour 1.6 2.0 2.5 2.5 3.0 3.0 4.0 4.5 5.0 5.5 5.5 5.5

mm mm mm mm mm mm mm mm mm mm mm mm

Black Black Black Black Black Black Black Black Black Black Black Black

5526-25-040 5526-25-050

35 - 42 mm 25 m 42 - 58 mm 25 m

3.0 mm 3.0 mm

Black Black

5526-50-016 5526-50-020 5526-50-025 5526-50-032

11 17 21 27

-

17 21 27 35

mm mm mm mm

50 50 50 50

m m m m

1.6 2.0 2.5 2.5

mm mm mm mm

Black Black Black Black

5526-10-016 11- 17 5526-10-020 17 - 21 5526-10-025 21 - 27 5526-10-032 27 - 35 5526-10-040 35 - 42 5526-10-050 42 - 58 5526-10-075 58 - 70 5526-10-090 70 - 90 5526-10-110 90 - 115 5526-10-140 115 - 135 5526-10-160 135 - 165 5526-10-200 165 - 220

mm mm mm mm mm mm mm mm mm mm mm mm

1 1 1 1 1 1 1 1 1 1 1 1

m m m m m m m m m m m m

1.6 2.0 2.5 2.5 3.0 3.0 4.0 4.5 5.0 5.5 5.5 5.5

mm mm mm mm mm mm mm mm mm mm mm mm

Black Black Black Black Black Black Black Black Black Black Black Black

Other colours are available upon request

Floor rack for 1 meter lengths Part no.

Number of hose protections

5524-00-001 5524-10-020 5524-10-025 5524-10-032 5524-10-050 5524-10-075 5524-10-090 5524-10-110 5526-10-020 5526-10-025 5526-10-032 5526-10-050 5526-10-075 5526-10-090 5526-10-110

Complete hose protection rack including:

10 pcs 10 pcs 10 pcs 7 pcs 5 pcs 4 pcs 3 pcs 10 pcs 10 pcs 10 pcs 7 pcs 5 pcs 4 pcs 3 pcs

Yellow Yellow Yellow Yellow Yellow Yellow Yellow Black Black Black Black Black Black Black

5526-6 Textile hose protection Nylon fibre weave Part no. 5526-60-23 5526-60-25 5526-60-27 5526-60-31 5526-60-36 5526-60-40 5526-60-53 5526-60-60 5526-60-73

Round diameter 23 25 27 31 36 40 53 60 73

mm mm mm mm mm mm mm mm mm

Fits hose size 3/16" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2" 6 steel spiral hose

PRODUCT CATALOGUE 2009

Flat diameter 36 39 42 49 54 63 83 94 115

Quick list â&#x20AC;&#x201C; Correct protection & hose Part no. 552x-xx-016 552x-xx-016 552x-xx-020 552x-xx-025 552x-xx-032 552x-xx-040 552x-xx-050 552x-xx-075 552x-xx-075 552-x-xx-090

Colour

mm mm mm mm mm mm mm mm mm

5526-7 Sealable textile hose protection Fiberglass covered silicone with burdock seal Part no.

Round diameter

5526-70-50 5526-71-00 5526-71-50 5526-72-00

50 mm 100 mm 150 mm 200 mm

Flat diameter 78 157 235 314

mm mm mm mm

183

5:05


ACCESSORIES

product group 505 5525

5528

Fire sleeve for hose

Whipcheck

Fiberglass/silicone -65° – +260°C; Temporarily: (15 min.) +1050°C

Safety cable

Part no.

ID

5525-00-06 5525-00-08 5525-00-10 5525-00-12 5525-00-14 5525-00-16 5525-00-18 5525-00-20 5525-00-22 5525-00-24 5525-00-28 5525-00-32 5525-00-39

10 13 16 19 22 25 28 32 35 38 44 51 57

Thickness mm mm mm mm mm mm mm mm mm mm mm mm mm

4 4 4 4 4 4 4 4 4 4 4 4 4

mm mm mm mm mm mm mm mm mm mm mm mm mm

5527 Crimp hose PVC Black

Crimp temperature: 100 – 115 °C Crimp capacity, diametrical: 35 – 50 % Crimp capacity , on the length: 5 – 15 %

Part no.

Description Max ID Min ID Length/pack

5527-00-19 5527-00-24 5527-00-29 5527-00-35 5527-00-41 5527-00-48 5527-00-56 5527-00-66

Crimp Crimp Crimp Crimp Crimp Crimp Crimp Crimp

hose hose hose hose hose hose hose hose

19 24 29 35 41 48 56 66

12 15 18 21 25 29 34 40

50 50 50 50 50 50 50 50

m m m m m m m m

5528 Stainless steel braid

Part no.

Description

5528-00-12 5528-00-16 5528-00-19 5528-00-24 5528-00-29 5528-00-35 5528-00-44 5528-00-53 5528-00-66 5528-00-86 5528-00-98

Stainless Stainless Stainless Stainless Stainless Stainless Stainless Stainless Stainless Stainless Stainless

184

steel steel steel steel steel steel steel steel steel steel steel

braid braid braid braid braid braid braid braid braid braid braid

12 16 19 24 29 35 44 53 66 86 98

ID

kg/m

mm mm mm mm mm mm mm mm mm mm mm

0.090 0.135 0.140 0.240 0.240 0.305 0.480 0.610 0.700 1.200 1.410

Part no.

Description

Dimension

5528-01-02 5528-01-04

Hose to hose Hose to hose

1/2" - 1 1/4" 1 1/2" - 3"

5528-10 / 5528-20 Support plait single / open Part no.

Description

Dimension

5528-10-20 5528-10-30 5528-10-40 5528-10-50 5528-10-65 5528-10-80

Support Support Support Support Support Support

plait, plait, plait, plait, plait, plait,

open open open open open open

10 20 30 40 50 65

-

20 30 40 50 65 80

mm mm mm mm mm mm

5528-20-20 5528-20-30 5528-20-40 5528-20-50 5528-20-65 5528-20-80

Support Support Support Support Support Support

plait, plait, plait, plait, plait, plait,

single single single single single single

10 20 30 40 50 65

-

20 30 40 50 65 80

mm mm mm mm mm mm

5770 Rubber protection For cleaning hoses Part no.

Description

Colour

5770-01-15 5770-01-17 5770-01-18 5770-01-22 5770-02-15 5770-02-18 5770-02-22

Rubber Rubber Rubber Rubber Rubber Rubber Rubber

Black Black Black Black Blue Blue Blue

protection protection protection protection protection protection protection

ID 15 17 18 22 15 18 22

mm mm mm mm mm mm mm

5490 Suction strainer

Part no.

Description

5490-00-24 5490-00-32 5490-00-48 5490-00-64

Suction Suction Suction Suction

strainer strainer strainer strainer

Dimension 1 1/2" 2" 3" 4"

PRODUCT CATALOGUE 2009


Product group 505

ACCESSORIES 5490-10

5530-01

Non-return valve, brass

Protection plug – Tapered

Working pressure: 16 Bar Opening pressure: 0.02 Bar Temperature: +120°C Spring of stainless steel. Seal of nitrile.

Part no.

Description

5490-10-06 5490-10-08 5490-10-12 5490-10-16 5490-10-20 5490-10-24 5490-10-32 5490-10-40 5490-10-48 5490-10-64

Non-return Non-return Non-return Non-return Non-return Non-return Non-return Non-return Non-return Non-return

Thread

valve valve valve valve valve valve valve valve valve valve

G 3/8"F G 1/2"F G 3/4"F G 1"F G 1 1/4"F G 1 1/2"F G 2"F G 2 1/2"F G 3"F G 4"F

5490-20 Foot-valve brass with strainer Working pressure: 16 Bar Opening pressure: 0.02 Bar Temperature: +120°C Spring of stainless steel. Seal of nitrile.

Part no.

Description

5490-20-06 5490-20-08 5490-20-12 5490-20-16 5490-20-20 5490-20-24 5490-20-32

Non-return Non-return Non-return Non-return Non-return Non-return Non-return

Thread

valve valve valve valve valve valve valve

with with with with with with with

strainer G strainer G strainer G strainer strainer G 1 strainer G 1 strainer

3/8"F 1/2"F 3/4"F G 1"F 1/4"F 1/2"F G 2"F

Red Part no.

Description

5530-01-10 5530-01-11 5530-01-12 5530-01-15 5530-01-16 5530-01-17 5530-01-18 5530-01-20 5530-01-25 5530-01-27 5530-01-30 5530-01-35 5530-01-36 5530-01-37 5530-01-38 5530-01-40 5530-01-41 5530-01-42 5530-01-44 5530-01-45 5530-01-50 5530-01-52 5530-01-55 5530-01-60 5530-01-65 5530-01-70 5530-01-75 5530-01-76

Protection Protection Protection Protection Protection Protection Protection Protection Protection Protection Protection Protection Protection Protection Protection Protection Protection Protection Protection Protection Protection Protection Protection Protection Protection Protection Protection Protection

Dimension

plug plug plug plug plug plug plug plug plug plug plug plug plug plug plug plug plug plug plug plug plug plug plug plug plug plug plug plug

8.2 - 9.4 9.2 - 10.6 9.9 - 11.1 10.8 - 12.6 11.6 - 13.0 12.4 - 13.9 13.0 - 14.2 14.1 - 15.9 14.5 - 16.1 15.4 - 17.2 17.0 - 19.0 18.0 - 20.2 19.4 - 21.3 20.2 - 22.0 21.5 - 23.5 22.4 - 25.3 24.0 - 25.7 25.2 - 27.2 27.4 - 28.7 27.8 - 30.5 29.4 - 31.8 31.0 - 33.2 33.2 - 35.0 38.0 - 40.4 41.5 - 43.9 44.0 - 46.8 47.2 - 49.7 49.1 - 51.5

5531-00

5531-01

Protection plug – UNF M

Protection cap – UNF F

Yellow

Yellow

Part no.

Description

5531-00-07 5531-00-08 5531-00-09 5531-00-12 5531-00-14 5531-00-17 5531-00-19 5531-00-21 5531-00-26 5531-00-30

Protection Protection Protection Protection Protection Protection Protection Protection Protection Protection

PRODUCT CATALOGUE 2009

plug plug plug plug plug plug plug plug plug plug

7/16" 1/2" 9/16" 3/4" 7/8" 1 1/16" 1 3/16" 1 5/16" 1 5/8" 1 7/8"

-

20 20 18 16 14 12 12 12 12 12

Thread

Part no.

Description

UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF

5531-01-07 5531-01-08 5531-01-09 5531-01-12 5531-01-14 5531-01-17 5531-01-19 5531-01-21 5531-01-26 5531-01-30

Protective Protective Protective Protective Protective Protective Protective Protective Protective Protective

M M M M M M M M M M

cover cover cover cover cover cover cover cover cover cover

Thread 7/16" 1/2" 9/16" 3/4" 7/8" 1 1/16" 1 3/16" 1 5/16" 1 5/8" 1 7/8"

-

20 20 18 16 14 12 12 12 12 12

UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF

F F F F F F F F F F

185

5:05


ACCESSORIES

product group 505

5534-03/06

5533-01

Protection cap – SAE FLANGE

Protection cap – G f

Red

Yellow

Part no.

Description

Dimension

5534-03-08

Protective cover SAE Flange 3000 PSI

1/2"

5534-03-12

Protective cover SAE Flange 3000 PSI

3/4"

5534-03-16

Protective cover SAE Flange 3000 PSI

1"

5534-03-20

Protective cover SAE Flange 3000 PSI

1 1/4" 1 1/2"

5534-03-24

Protective cover SAE Flange 3000 PSI

5534-03-32

Protective cover SAE Flange 3000 PSI

2"

5534-06-08

Protective cover SAE Flange 6000 PSI

1/2"

5534-06-12

Protective cover SAE Flange 6000 PSI

3/4"

5534-06-16

Protective cover SAE Flange 6000 PSI

1"

5534-06-20

Protective cover SAE Flange 6000 PSI

1 1/4"

5534-06-24

Protective cover SAE Flange 6000 PSI

1 1/2"

5534-06-32

Protective cover SAE Flange 6000 PSI

2"

5532-03

Part no.

Description

5533-01-02 5533-01-04 5533-01-06 5533-01-08 5533-01-10 5533-01-12 5533-01-14 5533-01-16 5533-01-20 5533-01-24 5533-01-32

Cover Cover Cover Cover Cover Cover Cover Cover Cover Cover Cover

(3)

Thread

guard guard guard guard guard guard guard guard guard guard guard

5532-03-15 5532-03-25 5532-03-35 5532-03-40 5532-03-50 5532-03-60 5532-03-70

Protection Protection Protection Protection Protection Protection Protection

Thread

plug plug plug plug plug plug plug

KS 1/4" KS 3/8" KS 1/2" KS 3/4" KS 1" KS 1 1/4" KS 1 1/2"

F F F F F F F F F F F

5660-30 Thread seal tread lock flange seal etc

(1)

Red Description

1/8" 1/4" 3/8" 1/2" 5/8" 3/4" 7/8" G 1" G 1 1/4" G 1 1/2" G 2"

(2)

Protection plug – KS

Part no.

G G G G G G G

Part no.

Description

Type

pcs/pack

Thread seal (1) 5660-30-10

Thread seal

Gas, oil, VVS

5660-30-11

Thread seal

Gas, oil, VVS 250 ml.

5660-30-18

Thread seal

5660-30-20

Thread seal

Hydraulic/pneumatic

75 ml. 50 ml.

PTFE 100 ml.

Thread lock (2) 5660-30-12

Thread lock

5660-30-13

Thread locks paste

Light

50 ml.

5660-30-16

Thread lock

Medium

50 ml.

5660-30-19

Thread lock Solid, high temp +230°C

50 ml.

50 g.

Flange seal (3) 5660-30-61

5533-00

Part no.

Description

5533-00-02 5533-00-04 5533-00-06 5533-00-08 5533-00-10 5533-00-12 5533-00-14 5533-00-16 5533-00-20 5533-00-24 5533-00-32

Protection Protection Protection Protection Protection Protection Protection Protection Protection Protection Protection

186

Flange seal

75 ml.

Others 5660-30-27

Belt spray 400ml.

Protection plug – G m

5660-30-35

Allround spray 400 ml.

Yellow

5660-30-36

Cutting oil spray 400 ml.

5660-30-37

Chain lubricating spray 300 ml.

5660-30-38

Universal cleaning spray 500 ml.

5660-30-82

Leak seeker 400 ml.

plug plug plug plug plug plug plug plug plug plug plug

Thread G G G G G G G

1/8" 1/4" 3/8" 1/2" 5/8" 3/4" 7/8" G 1" G 1 1/4" G 1 1/2" G 2"

M M M M M M M M M M M

5650 THREAD TAPE Part no.

Description

5650-00-01

Thread tape

Width

Length

1/2"

12m

PRODUCT CATALOGUE 2009


Product group 505

ACCESSORIES 54xx

5902

Hose Reels

GREASE EQUIPMENT Part no.

Description

5902-00-11 5902-00-12 5902-00-14

Grease hose Grease hose Grease hose

Part no.

Length

Thread

300 mm 450 mm 700 mm

K 1/8" M K 1/8" M K 1/8" M

Description

Thread

8A14512 8A509F 8A535F 8A519F 8A504 8A576 8ANA7206 8A505 8A505B 8A584 8A577 8A580 8A583

Grease couplers Straight grease nipple 90° grease nipple 45° grease nipple Straight grease nipple 90° grease nipple 45° grease nipple Straight grease nipple 45° grease nipple 45° grease nipple 90° grease nipple Straight grease nipple 90° grease nipple

G 1/4"F G 1/8"M G 1/8"M G 1/8"M M 6 x 1.0 M M 6 x 1.0 M M 6 x 1.0 M M 8 x 1.0 M M 8 x 1.0 M M 10 x 1.0 M M 8 x 1.0 M M 10 x 1.0 M M 10 x 1.0 M

5902-90-01

Assortment box Grease nipples 4 couplers / 135 nipples

5400-00-00 Part no.

5404-00-01

Media

Hose dim. Hose length

Work. pressure 60 bar 5400-60-06

Air, oil,water 40°C

3/8"

15 m

5400-60-08

Air, oil,water 40°C

1/2"

10 m

5401-60-08* Air, oil,water 40°C

1/2"

10 m

5402-60-06

Air, oil,water 40°C

3/8"

20 m

5402-60-08

Air, oil,water 40°C

1/2"

15 m

5403-60-08* Air, oil,water 40°C

1/2"

15 m

5405-61-16

Water 150°C

5/8" - 1"

15 - 25 m

5403-62-16

Air, oil,water 40°C

5/8" - 1"

15 - 25 m

Work. pressure 400 bar 5400-40-04

Grease

1/4"

15 m

5400-40-06

Water 150°C

3/8"

15 m

5401-40-06* Water 150°C

3/8"

15 m

5402-40-04

Grease

1/4"

20 m

5402-40-06

Water 150°C

3/8"

20 m

5403-40-06* Water 150°C

3/8"

20 m

3/8" - 1/2"

25 m

1/4"

10 m

5407-20-05

Oxygen – Acetylen 8 x 14 mm

20 m

5407-20-06

Oxygen – Acetylen 10 x 17 mm

15 m

5405-41-08

Water 150°C

Air reel 20 bar 5404-00-01

Air

Welding hose 20 bar (twin hose)

825x Oil Part no.

Description

Quantity

8250-32-20 8250-32-04 8250-46-20 8250-46-04 8251-00-20 8251-10-20 8251-15-20 5650-00-05

Hydraulic oil ISO VG 32 Hydraulic oil ISO VG 32 Hydraulic oil ISO VG 46 Hydraulic oil ISO VG 46 Hydraulic oil Bio+ 32-68 Motor oil SAE 10W30 Motor oil SAE 15W40 Assembling oil for stainless steel

Manual Reel for water hose 5408-00-00

Water

1/2" - 3/4"

25 - 50 m

*Stainless design

20L 4L 20L 4L 20L 20L 20L

8258 Premium Hi-Temp Lubricant Temperature rage: -30° – +170°C, temporarily +290°C Timken Load > lbs 80+ NGLI Nr. EP2

Part no.

Description

Packaging Quantity

8258-00-04 8258-00-16 8258-00-54 8258-01-81

Premium Premium Premium Premium

Cartridge 0.4 Bucket 16.0 Barrel 54.5 Barrel 181.0

Hi-Temp Hi-Temp Hi-Temp Hi-Temp

PRODUCT CATALOGUE 2009

Kg Kg Kg Kg

187

5:05


ACCESSORIES

product group 505

5601

5995

Rubber Steel Bonded Washer

Enviromental Oil Plug

Part no.

Thread connection

Oil plug 5995-14-15 5995-16-15 5995-18-15 5995-18-16 5995-20-16 5995-22-15 5995-24-15M 5995-24-20M 5995-01-12 5995-01-14 5995-00-06 5995-00-08 5995-00-12M Part no.

M M M M M M M M M M M M M

22 22 22 26 26 26 26 26 26 26 22 26 26

M14 x 1.5 M16 x 1.5 M18 x 1.5 M18 x 1.5 M20 x 1.5 M22 x 1.5 M24 x 1.5 M24 x 2.0 3/4"-16 UNF 7/8"-14 UNF G 3/8" G 1/2" G 3/4"

Thread connection

Drainage hose 5996-00-22 5996-05-22 5996-02-26 5996-05-26 5996-01-26 5996-42-22 5996-92-22 5996-42-26

M M M M M M M M

Threaded block

22 22 26 26 26 22 45° 22 90° 26 45°

M M M M M M M M M M M M M

Hose length

250 500 250 500 1000 250 250 250

mm mm mm mm mm mm mm mm

5601-00 Assortment Boxs

Part no.

Description

Type Quantity

5601-00-02 Rubber steel bonded washer

inch 118 pcs

5601-00-03 Rubber steel bonded washer

mm 130 pcs

5601-00-04 Rubber steel bonded washer inch/mm 225 pcs 5620-00-01 Copper plate

mm 225 pcs

5902-90-01 Grease nipples 139 pcs 5611-00-01 O-rings 70 shore

inch 328 pcs

5611-00-02 O-rings 70 shore

mm 460 pcs

5611-00-03 ORFS O-rings (and tool) 145 pcs

Part no.

Description

5601-01-02

Rubber steel bonded washer NBR

G 1/8"

5601-01-04

Rubber steel bonded washer NBR

G 1/4"

5601-01-06

Rubber steel bonded washer NBR

G 3/8"

5601-01-08

Rubber steel bonded washer NBR

G 1/2"

5601-01-10

Rubber steel bonded washer NBR

G 5/8"

5601-01-12

Rubber steel bonded washer NBR

G 3/4"

5601-01-16

Rubber steel bonded washer NBR

G 1"

5601-01-20

Rubber steel bonded washer NBR

G 1 1/4"

5601-01-24

Rubber steel bonded washer NBR

G 1 1/2"

5601-01-32

Rubber steel bonded washer NBR

G 2"

5601-01-40

Rubber steel bonded washer NBR

G 2 1/2"

5601-02-05

Rubber steel bonded washer NBR

M5

5601-02-06

Rubber steel bonded washer NBR

M6

5601-02-08

Rubber steel bonded washer NBR

M8

5601-02-10

Rubber steel bonded washer NBR

M 10

5601-02-12

Rubber steel bonded washer NBR

M 12

5601-02-14

Rubber steel bonded washer NBR

M 14

5601-02-16

Rubber steel bonded washer NBR

M 16

5601-02-18

Rubber steel bonded washer NBR

M 18

5601-02-20

Rubber steel bonded washer NBR

M 20

5601-02-22

Rubber steel bonded washer NBR

M 22

5601-02-27

Rubber steel bonded washer NBR

M 27

5601-02-28

Rubber steel bonded washer NBR

M 28

5601-02-36

Rubber steel bonded washer NBR

M 36

5601-02-45

Rubber steel bonded washer NBR

M 45

5601-01-02V

Rubber steel bonded washer viton

5601-01-04V

Rubber steel bonded washer viton

G 1/4"

5601-01-06V

Rubber steel bonded washer viton

G 3/8"

G 1/8"

5601-01-08V

Rubber steel bonded washer viton

G 1/2"

5601-01-10V

Rubber steel bonded washer viton

G 5/8"

5601-01-12V

Rubber steel bonded washer viton

G 3/4"

5601-01-16V

Rubber steel bonded washer viton

G 1"

5601-01-20V

Rubber steel bonded washer viton

G 1 1/4"

5601-01-24V

Rubber steel bonded washer viton

G 1 1/2"

5601-01-32V

Rubber steel bonded washer viton

G 2"

5601-01-40V

Rubber steel bonded washer viton

G 2 1/2"

5601-02-05V

Rubber steel bonded washer viton

M5

5601-02-06V

Rubber steel bonded washer viton

M6

5601-02-08V

Rubber steel bonded washer viton

M8

5601-02-10V

Rubber steel bonded washer viton

M 10

5601-02-12V

Rubber steel bonded washer viton

M 12

5601-02-14V

Rubber steel bonded washer viton

M 14

5601-02-16V

Rubber steel bonded washer viton

M 16

5601-02-18V

Rubber steel bonded washer viton

M 18

5601-02-20V

Rubber steel bonded washer viton

M 20

5601-02-22V

Rubber steel bonded washer viton

M 22

5601-02-27V

Rubber steel bonded washer viton

M 27

5601-02-28V

Rubber steel bonded washer viton

M 28

5601-02-36V

Rubber steel bonded washer viton

M 36

5601-02-45V

Rubber steel bonded washer viton

M 45

5601-00-02

Assortment box

5601-00-03

Assortment box

6 – 22 mm

5601-00-04

Assortment box

1/8" – 1 1/4"

188

For thread

1/8" – 1 1/2"

6 – 18mm

PRODUCT CATALOGUE 2009


Product group 505

Part no.

Description

5610-01-07 5610-01-08 5610-01-09 5610-01-12 5610-01-14 5610-01-17 5610-01-19 5610-01-21 5610-01-26 5610-01-30

O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring

5610-02-08 5610-02-12 5610-02-16 5610-02-20 5610-02-24 5610-02-32 5610-02-40

O-ring O-ring O-ring O-ring O-ring O-ring O-ring

5610-03-06 5610-03-08 5610-03-10 5610-03-12

ACCESSORIES

5610

5620

O-Rings

Copper Plate

For

Part no.

Description

5620-05-09

KBR

5.0 mm

9.0 mm

1.0 mm

5620-06-10

KBR

6.0 mm

10.0 mm

1.0 mm

5620-06-12

KBR

6.0 mm

12.0 mm

1.0 mm

5620-08-12

KBR

8.0 mm

12.0 mm

1.0 mm

5620-08-14

KBR

8.0 mm

14.0 mm

1.0 mm

5620-10-14

KBR

10.0 mm

14.0 mm

1.0 mm

5620-10-15

KBR

10.0 mm

15.0 mm

1.0 mm

5620-10-16

KBR

10.0 mm

16.0 mm

1.0 mm

5620-11-17

KBR

11.0 mm

17.0 mm

1.0 mm

5620-12-15

KBR

12.0 mm

15.0 mm

1.0 mm

Flange Flange Flange Flange Flange Flange Flange

5620-12-18

KBR

12.0 mm

18.0 mm

1.0 mm

5620-12-19

KBR

12.0 mm

19.0 mm

1.0 mm

5620-12-20

KBR

12.0 mm

20.0 mm

2.0 mm

5620-13-18

KBR

13.5 mm

18.0 mm

1.5 mm

5620-13-19

KBR

13.0 mm

19.0 mm

1.5 mm

5620-14-18

KBR

14.0 mm

18.0 mm

1.5 mm

O-ring O-ring O-ring O-ring

DKL(S)O 6 DKL(S)O 8 DKL(S)O 10 DKL(S)O 12

5620-14-20

KBR

14.0 mm

20.0 mm

1.5 mm

5620-14-24

KBR

14.0 mm

24.0 mm

1.0 mm

5620-16-22

KBR

16.0 mm

22.0 mm

1.5 mm

5620-17-21

KBR

17.0 mm

21.0 mm

1.5 mm

5610-03-15 5610-03-18 5610-03-22 5610-03-28 5610-03-35 5610-03-42 5610-04-14 5610-04-16 5610-04-20 5610-04-25 5610-04-30 5610-04-38

O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring

DKLO DKLO DKLO DKLO DKLO DKLO DKSO DKSO DKSO DKSO DKSO DKSO

5620-17-22

KBR

17.0 mm

22.0 mm

1.5 mm

5620-17-23

KBR

17.0 mm

23.0 mm

1.5 mm

5620-18-22

KBR

18.0 mm

22.0 mm

1.5 mm

5620-18-24

KBR

18.0 mm

24.0 mm

1.5 mm

5620-20-26

KBR

20.0 mm

26.0 mm

1.5 mm

5620-21-26

KBR

21.0 mm

26.0 mm

1.5 mm

5620-21-27

KBR

21.0 mm

27.0 mm

1.5 mm

5620-22-27

KBR

22.0 mm

27.0 mm

1.5 mm

5620-22-29

KBR

22.0 mm

29.0 mm

1.5 mm

5620-23-28

KBR

23.0 mm

28.0 mm

1.5 mm

5620-24-29

KBR

24.0 mm

29.0 mm

2.0 mm

5620-24-30

KBR

24.0 mm

30.0 mm

2.0 mm

5610-05-14

O-ring

3173-14-xx

5620-26-32

KBR

26.0 mm

32.0 mm

2.0 mm

5610-06-04 5610-06-06 5610-06-08 5610-06-10 5610-06-12 5610-06-16 5610-06-20 5610-06-24 5610-06-32

O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring

G G G G G

5620-27-32

KBR

27.0 mm

32.0 mm

2.0 mm

5620-33-39

KBR

33.0 mm

39.0 mm

2.0 mm

5620-38-44

KBR

38.0 mm

44.0 mm

2.0 mm

5620-60-68

KBR

60.0 mm

68.0 mm

2.5 mm

5620-00-01

Assortment box. mm 10â&#x20AC;&#x201C;26 mm

5610-07-04 5610-07-06 5610-07-08 5610-07-10 5610-07-12 5610-07-16 5610-07-20 5610-07-24

O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring

5611-00-01 5611-00-01 5611-00-03

Assortment box, tum Assortment box, mm ORFS O-rings (and tool)

PRODUCT CATALOGUE 2009

7/16" 1/2" 9/16" 3/4" 7/8" 1 1/16" 1 3/16" 1 5/16" 1 5/8" 1 7/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2"

1/4" 3/8" 1/2" 5/8" 3/4" G 1" G 1 1/4" G 1 1/2" G 2" 9/16" 11/16" 13/16" 1" 1 3/16" 1 7/16" 1 11/16" 2"

UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF

15 18 22 28 35 42 14 16 20 25 30 38

IR IR IR IR IR IR IR IR IR

O O O O O O O O O

ID

YD

Thickness

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

382 pcs 460 pcs 145 pcs

189

5:05


HYDROSCAND Flanges Table of contents

Flanges Product group 510 The Hydroscand flange program includes everything from split flanges to threaded and welding ones. Flanges are used in hydraulic systems that require high pressure and high pulsation. The flanges are manufactured according to SAE J518 code 61 and 62. Code 61 signifies the pressure ratings mentioned below, also called 3000 psi. Code 62 signifies the pressure rate 41.4 MPa, also called 6000 psi. Many of the flanges are also available in stainless steel design.

Flanges page

5540-00 5540-02 5540-01 5540-03 5549-00 5549-02 5549-01 5549-03 5574 5575 5541-01 5541-02 5541-06 5541-07 5543-00 5543-02 5543-06 5543-07 5544-00 5544-02 5544-06 5544-08 5545-00 5545-01 5545-02 5545-03 5545-04 5545-06 5546-00 5546-02 5547-00 5547-02 5548-00 5548-02 5549-91 5549-92

Split flange Split flange Flat split flange Flat split flange One-piece flange One-piece flange One-piece flange One-piece flange Welding nipple male Welding nipple male Threaded flange Threaded flange Counter flange, flat Counter flange, threaded Welding flange Welding flange Counter flange, welding Counter flange, welding Welding flange, male Welding flange, male Welding Counter flange, male Welding Counter flange, male Flange plug Flange plug Flange plug Flange plug Middle flange with socket Middle flange with socket Welding flange, female 90° Welding flange, female 90° Welding flange, male 90° Welding flange, male 90° Flange threaded, 90° Flange threaded, 90° Socket head cap screw M 6S 12.9 M-thread Socket head cap screw M 6S 12.9 UNC-thread

192 192 192 192 192 192 192 192 193 193 193 193 193 193 193 194 194 194 194 194 194 194 194 195 195 195 195 195 195 195 195 196 196 196 196 196

Technical information according to SAE J518 code 61 Flange

1/2"

3/4"

1"

1 1/4"

1 1/2"

2"

2 1/2"

3"

WP MPa

34.5

34.5

34.5

27.6

20.7

20.7

17.2

13.8

PSI

5000

5000

5000

4000

3000

3000

2500

2000

Technical information according to SAE J518 code 62 Flange

1/2"

3/4"

1"

1 1/4"

1 1/2"

2"

2 1/2"

3"

WP MPa

41.4

41.4

41.4

41.4

41.4

41.4

41.4

41.4

PSI

6000

6000

6000

6000

6000

6000

6500

6000

Hydroscand reserves the right to modify any or all parts of this catalogue without any prior notice.

PRODUCT CATALOGUE 2009

191

5:10


HYDROSCAND Flanges

Part number

Description

5540-00-08 5540-00-12 5540-00-16 5540-00-20 5540-00-24 5540-00-32 5540-00-40 5540-00-48

Split Split Split Split Split Split Split Split

flange flange flange flange flange flange flange flange

Part number

Description

5540-02-08 5540-02-12 5540-02-16 5540-02-20 5540-02-24 5540-02-32

Split Split Split Split Split Split

flange flange flange flange flange flange

Product group 510

5540-00

5549-00

Split flange

One-piece flange

SAE J518 Code 61

SAE J518 Code 61

SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3

Dimension

Part number

Description

1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3"

5549-00-08 5549-00-12 5549-00-16 5549-00-20 5549-00-24 5549-00-32 5549-00-40 5549-00-48

AFS/I AFS/I AFS/I AFS/I AFS/I AFS/I AFS/I AFS/I

-301 -302 -303 -304 -305 -306 -307 -308

SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3

5549-02

Split flange

One-piece flange

SAE J518 Code 62

SAE J518 Code 62

SAE6 SAE6 SAE6 SAE6 SAE6 SAE6

Dimension

Part number

Description

1/2" 3/4" 1" 1 1/4" 1 1/2" 2"

5549-02-08 5549-02-12 5549-02-16 5549-02-20 5549-02-24 5549-02-32

AFS/I AFS/I AFS/I AFS/I AFS/I AFS/I

-601 -602 -603 -604 -605 -606

Flat Flat Flat Flat Flat Flat

split split split split split split

flange flange flange flange flange flange

SAE3 SAE3 SAE3 SAE3 SAE3 SAE3

One-piece flange Threaded fixing holes SAE J518 Code 61

Dimension

Part number

Description

Hole Dimension

1/2" 3/4" 1" 1 1/4" 1 1/2" 2"

5549-01-08 5549-01-12 5549-01-16 5549-01-20 5549-01-24 5549-01-32 5549-01-40 5549-01-48

AFS/I AFS/I AFS/I AFS/I AFS/I AFS/I AFS/I AFS/I

M8 M10 M10 M10 M12 M12 M12 M16

-301 -302 -303 -304 -305 -306 -307 -308

SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3

One-piece flange

Flat split flange

Threaded fixing holes SAE J518 Code 62

SAE J518 Code 62 Description

5540-03-08 5540-03-12 5540-03-16 5540-03-20 5540-03-24

Flat Flat Flat Flat Flat

192

split split split split split

flange flange flange flange flange

SAE6 SAE6 SAE6 SAE6 SAE6

1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3"

5549-03

5540-03

Part number

1/2" 3/4" 1" 1 1/4" 1 1/2" 2"

5549-01

SAE J518 Code 61

5540-01-08 5540-01-12 5540-01-16 5540-01-20 5540-01-24 5540-01-32

Dimension

SAE6 SAE6 SAE6 SAE6 SAE6 SAE6

Flat split flange

Description

1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3"

5540-02

5540-01

Part number

Dimension

Dimension

Part number

Description

Hole Dimension

1/2" 3/4" 1" 1 1/4" 1 1/2"

5549-03-08 5549-03-12 5549-03-16 5549-03-20 5549-03-24 5549-03-32

AFS/I AFS/I AFS/I AFS/I AFS/I AFS/I

M8 M10 M12 M14 M16 M20

-601 -602 -603 -604 -605 -606

SAE6 SAE6 SAE6 SAE6 SAE6 SAE6

1/2" 3/4" 1" 1 1/4" 1 1/2" 2"

PRODUCT CATALOGUE 2009


Product group 510

HYDROSCAND Flanges 5574

5541-02

Welding nipple male

Threaded flange SAE J518 Code 62

SAE J518 Code 61 Part number

Description

Dimension

5574-00-08 5574-00-12 5574-00-16 5574-00-20 5574-00-24 5574-00-32 5574-00-40 5574-00-48 5574-00-56 5574-00-64

SFS 301/ST SAE3

1/2"

SFS 302/ST SAE3

3/4"

SFS 303/ST SAE3

Ø ID

Part number

Description

16 mm

2 mm

25 mm

3 mm

5541-02-06 5541-02-08 5541-02-12 5541-02-16 5541-02-20 5541-02-24 5541-02-32

AFS-401/G AFS-401/G AFS-402/G AFS-403/G AFS-404/G AFS-405/G AFS-406/G

Ø OD

1"

30 mm

4 mm

SFS 304/ST SAE3 1 1/4"

38 mm

5 mm

SFS 305/ST SAE3 1 1/2"

45 mm

5 mm

SFS 306/ST SAE3

60 mm

5 mm

2"

SFS 307/ST SAE3 2 1/2" SFS 308/ST SAE3

3"

SFS 309/ST SAE3 3 1/2" SFS 310/ST SAE3

70 mm 7. 5 mm 80 mm

Thread

SAE6 SAE6 SAE6 SAE6 SAE6 SAE6 SAE6

G 3/8" G 1/2" G 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

6 mm

100 mm 5. 5 mm

5541-06

4" 114.4 mm 6.5 mm

Counter flange, flat SAE J518 Code 61

5575 Welding nipple male SAE J518 Code 62 Part number

Description

Dimension

Ø OD

Ø ID

5575-00-08 5575-00-12 5575-00-16 5575-00-20 5575-00-24 5575-00-32

SFS 601/ST SAE6

1/2" 16 mm

12 mm

SFS 602/ST SAE6

3/4" 25 mm

18 mm

SFS 603/ST SAE6

1" 30 mm

22 mm

SFS 604/ST SAE6

1 1/4" 38 mm

27 mm

SFS 605/ST SAE6

1 1/2" 45 mm

32 mm

SFS 606/ST SAE6

2" 60 mm

45 mm

Part number

Description

5541-06-08 5541-06-12 5541-06-16 5541-06-20 5541-06-24 5541-06-32 5541-06-40 5541-06-48

GFS GFS GFS GFS GFS GFS GFS GFS

Thread

-080/GM -100/GM -102/GM -104/GM -106/GM -108/GM -110/GM -112/GM

8 SAE3 10 SAE3 10 SAE3 10 SAE3 12 SAE3 12 SAE3 12 SAE3 16 SAE3

G 1/2" G 3/4" G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3"

5541-07 Counter flange, threaded SAE J518 Code 62

5541-01 Threaded flange SAE J518 Code 61 Part number

Description

5541-00-08 5541-00-12 5541-00-16 5541-00-20 5541-00-24 5541-00-32 5541-00-40 5541-00-48 5541-00-56 5541-00-64

AFS-080/G AFS-100/G AFS-102/G AFS-104/G AFS-106/G AFS-108/G AFS-110/G AFS-112/G AFS-114/G AFS-116/G

PRODUCT CATALOGUE 2009

SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3

Part number

Description

Thread

5541-07-08 5541-07-12 5541-07-16 5541-07-20 5541-07-24 5541-07-32

GFS-401/GM GFS-402/GM GFS-403/GM GFS-404/GM GFS-405/GM GFS-406/GM

10 10 12 14 16 20

SAE6 SAE6 SAE6 SAE6 SAE6 SAE6

G 1/2" G 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

5543-00

Thread G 1/2" G 3/4" G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3" G 3 1/2" G 4"

Welding flange SAE J518 Code 61 Part number 5543-00-08 5543-00-12 5543-00-16 5543-00-20 5543-00-24 5543-00-32 5543-00-40 5543-00-48 5543-00-56

Description AFS-080/S AFS-100/S AFS-102/S AFS-104/S AFS-106/S AFS-108/S AFS-110/S AFS-112/S AFS-114/S

SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3

Dimension

1 1 2 3

Ø OD

1/2" 21.6 3/4" 27.2 1" 34.0 1/4" 42.8 1/2" 48.6 2" 61.0 1/2" 76.6 3" 90.5 1/2" 103,0

mm mm mm mm mm mm mm mm mm

Ø ID 13 19 25 32 38 51 63 73 89

mm mm mm mm mm mm mm mm mm

193

5:10


HYDROSCAND Flanges

Part number

Description

5543-02-06 5543-02-08 5543-02-12 5543-02-16 5543-02-20 5543-02-24 5543-02-32 5543-02-40

AFS-401/S SAE6 AFS-401/S SAE6 AFS-402/S SAE6 AFS-403/S SAE6 AFS-404/S SAE6 AFS-405/S SAE6 AFS-406/S SAE6 AFS-407/S SAE6

Product group 510

5543-02

5544-02

Welding flange

Welding flange, male

SAE J518 Code 62

SAE J518 Code 62

Dimension 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2"

Ø OD

17.5 21.6 27.2 34.0 42.8 48.6 61.0 76.6

mm mm mm mm mm mm mm mm

Ø ID 10 13 19 25 32 38 51 63

mm mm mm mm mm mm mm mm

Part number

Description

5544-02-08 5544-02-12 5544-02-16 5544-02-20 5544-02-24 5544-02-32

AFS-401/ST AFS-402/ST AFS-403/ST AFS-404/ST AFS-405/ST AFS-406/ST

Dimension SAE6 SAE6 SAE6 SAE6 1 SAE6 1 SAE6

1/2" 3/4" 1" 1/4" 1/2" 2"

Description

5543-06-08 5543-06-12 5543-06-16 5543-06-20 5543-06-24 5543-06-32 5543-06-40 5543-06-48

GFS-080/S GFS-100/S GFS-102/S GFS-104/S GFS-106/S GFS-108/S GFS-110/S GFS-112/S

Ø OD

SAE3 1/2" 21.6 mm SAE3 3/4" 27.2 mm SAE3 1" 34.0 mm SAE3 1 1/4" 42.8 mm SAE3 1 1/2" 48.6 mm SAE3 2" 61.0 mm SAE3 2 1/2" 76.6 mm SAE3 3" 90.5 mm

Part number

Description

5543-07-08 5543-07-12 5543-07-16 5543-07-20 5543-07-24 5543-07-32

GFS-401/S GFS-402/S GFS-403/S GFS-404/S GFS-405/S GFS-406/S

Part number

Description AFS-080/ST AFS-100/ST AFS-102/ST AFS-104/ST AFS-106/ST AFS-108/ST AFS-110/ST AFS-112/ST AFS-116/ST

Ø ID 13 19 25 32 38 51 63 73

mm mm mm mm mm mm mm mm

mm mm mm mm mm mm

SAE J518 Code 61 Part number

Description

5544-06-08 5544-06-12 5544-06-16 5544-06-20 5544-06-24 5544-06-32 5544-06-40 5544-06-48 5544-06-64

GFS-080/ST GFS-100/ST GFS-102/ST GFS-104/ST GFS-106/ST GFS-108/ST GFS-110/ST GFS-112/ST GFS-116/ST

Dimension

Ø OD

SAE3 1/2" 21.5 SAE3 3/4" 28.0 SAE3 1" 34.0 SAE3 1 1/4" 42.8 SAE3 1 1/2" 48.6 SAE3 2" 61.0 SAE3 2 1/2" 77.0 SAE3 3" 92.0 SAE3 4" 115.5

mm mm mm mm mm mm mm mm mm

Ø ID 13.0 19.0 25.0 32.0 38.0 51.0 63.0 73.0 99.0

mm mm mm mm mm mm mm mm mm

5543-07

5544-08

Counter flange, welding

Welding Counter flange, male

SAE J518 Code 62

SAE J518 Code 62

Dimension

Ø OD

SAE6 1/2" 21.6 SAE6 3/4" 27.2 SAE6 1" 34.0 SAE6 1 1/4" 42.8 SAE6 1 1/2" 48.6 SAE6 2" 61.0

5544-00-08 5544-00-12 5544-00-16 5544-00-20 5544-00-24 5544-00-32 5544-00-40 5544-00-48 5544-00-64

194

Dimension

Ø ID 13.0 19.0 25.0 32.0 38.0 51.0

Welding Counter flange, male

Counter flange, welding

Part number

mm mm mm mm mm mm

5544-06

5543-06

SAE J518 Code 61

Ø OD 21.5 28.0 34.0 42.8 48.6 61.0

mm mm mm mm mm mm

Ø ID 13 19 25 32 38 51

mm mm mm mm mm mm

Part number

Description

Dimension

5544-08-08 5544-08-12 5544-08-16 5544-08-20 5544-08-24 5544-08-32

GFS-401/STSAE6 GFS-402/ST SAE6 GFS-403/ST SAE6 GFS-404/ST SAE6 1 GFS-405/ST SAE6 1 GFS-406/ST SAE6

1/2" 3/4" 1" 1/4" 1/2" 2"

Ø OD 21.5 28.0 34.0 42.8 48.6 61.0

mm mm mm mm mm mm

Ø ID 13.0 19.0 25.0 32.0 38.0 51.0

mm mm mm mm mm mm

5544-00

5545-00

Welding flange, male

Flange plug

SAE J518 Code 61

SAE J518 Code 61

Dimension SAE3 SAE3 SAE3 SAE3 1 SAE3 1 SAE3 SAE3 2 SAE3 SAE3

Ø OD

1/2" 21.5 3/4" 28.0 1" 34.0 1/4" 42.8 1/2" 48.6 2" 61.0 1/2" 77.0 3" 92.0 4" 115.5

mm mm mm mm mm mm mm mm mm

Ø ID 13.0 19.0 25.0 32.0 38.0 51.0 63.0 73.0 99.0

mm mm mm mm mm mm mm mm mm

Part number

Description

5545-00-08 5545-00-12 5545-00-16 5545-00-20 5545-00-24 5545-00-32 5545-00-40 5545-00-48

AFC-080 AFC-100 AFC-102 AFC-104 AFC-106 AFC-108 AFC-110 AFC-112

SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3 SAE3

Dimension Plug Plug Plug Plug Plug Plug Plug Plug

1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3"

PRODUCT CATALOGUE 2009


Product group 510

HYDROSCAND Flanges 5545-06

5545-01

Middle flange with socket

Flange plug SAE J518 Code 61 Part number

Description

5545-01-12 5545-01-16 5545-01-20 5545-01-24 5545-01-32

Blind Blind Blind Blind Blind

plug plug plug plug plug

SAE3 SAE3 SAE3 SAE3 SAE3

Dimension

Part number

Description

Thread

3/4" 1" 1 1/4" 1 1/2" 2"

5545-06-12 5545-06-16 5545-06-20 5545-06-24 5545-06-32

D402 D403 D404 D405 D406

G G G G G

SAE6 SAE6 SAE6 SAE6 SAE6

SAE J518 Code 62

5545-02-08 5545-02-12 5545-02-16 5545-02-20 5545-02-24 5545-02-32

Blind Blind Blind Blind Blind Blind

plug plug plug plug plug plug

Dimension

SAE6 SAE6 SAE6 SAE6 SAE6 SAE6

1/2" 3/4" 1" 1 1/4" 1 1/2" 2"

Part number

Description

Dimension

5545-03-12 5545-03-16 5545-03-20 5545-03-24 5545-03-32

AFC-100 AFC-102 AFC-104 AFC-106 AFC-108

SAE6 SAE6 SAE6 SAE6 SAE6

Plug Plug Plug Plug Plug

3/4" 27.2 mm 19.0 mm 1" 34.0 mm 25.0 mm

5546-00-20 AFS-204/90S SAE3 1 1/4" 42.8 mm 32.0 mm 5546-00-24 AFS-206/90S SAE3 1 1/2" 48.6 mm 38.0 mm 5546-00-32 AFS-208/90S SAE3

5546-02 Welding flange, female 90° SAE J518 Code 62 Part number

Description

Dimension

Ø OD

Ø ID

5546-02-12 AFS-700/90S SAE6

3/4" 27.2 mm 19.0 mm

5546-02-16 AFS-702/90S SAE6

1" 34.0 mm 25.0 mm

5546-02-20 AFS-704/90S SAE6 1 1/4" 42.8 mm 32.0 mm 5546-02-24 AFS-706/90S SAE6 1 1/2" 48.6 mm 38.0 mm 5546-02-32 AFS-708/90S SAE6

2" 61.0 mm 51.0 mm

5547-00

Middle flange with socket

Welding flange, male 90°

SAE J518 Code 61

SAE J518 Code 61

Part number

Description

Thread

5545-04-16 5545-04-20 5545-04-24 5545-04-32

D102 D104 D106 D108

G G G G

PRODUCT CATALOGUE 2009

2" 61.0 mm 51.0 mm

5545-04

Thread G 1/8"

SAE3 SAE3 SAE3 SAE3

3/4" 1" 1 1/4" 1 1/2" 2"

Ø ID

5546-00-16 AFS-202/90S SAE3

SAE J518 Code 62 Dimension

Ø OD

5546-00-12 AFS-200/90S SAE3

Flange plug

Description

3/4" 1" 1 1/4" 1 1/2" 2"

SAE J518 Code 61

5545-03

Part number

1/8" 1/8" 1/8" 1/8" 1/4"

Welding flange, female 90°

Flange plug

Description

Dimension

5546-00

5545-02

Part number

SAE J518 Code 62

Thread G 1/8"

1/8" 1/8" 1/8" 1/8"

Dimension 1" 1 1/4" 1 1/2" 2"

Part number Description 5547-00-12 5547-00-16 5547-00-20 5547-00-24 5547-00-32

AFS-200/90ST AFS-202/90ST AFS-204/90ST AFS-206/90ST AFS-208/90ST

Dimension

Ø OD

Ø ID

SAE3 3/4" 27.0 mm 19.0 mm SAE3 1" 34.5 mm 23.0 mm SAE3 1 1/4" 43.0 mm 31.0 mm SAE3 1 1/2" 50.0 mm 35.0 mm SAE3 2" 65.0 mm 48.0 mm

195

5:10


HYDROSCAND Flanges

Product group 510 5547-02

5549-91

Welding flange, male 90°

Socket head cap screw M 6S 12.9 M-thread

SAE J518 Code 62 Part number Description 5547-02-12 5547-02-16 5547-02-20 5547-02-24

AFS-700/90ST AFS-702/90ST AFS-704/90ST AFS-706/90ST

Dimension

Ø OD

Ø ID

SAE6 3/4" 28.0 mm 19.0 SAE6 1" 34.0 mm 25.0 SAE6 1 1/4" 42.0 mm 32.0 SAE6 1 1/2" 48.0 mm 38.0

mm mm mm mm

Part number 5549-91-08 5549-91-10 5549-91-11 5549-91-12 5549-91-13 5549-91-14 5549-91-16

Thread Length M8 M10 M10 M10 M12 M14 M16

35 35 40 45 45 50 50

SAE3

SEA6

mm 1/2" 1/2" mm 3/4"–1" 3/4" mm 1 1/4" mm mm 1 1/2"–2 1/2" 1" mm 1 1/4" mm 3"–4" 1 1/2"

5548-00 Flange threaded, 90°

Part number

Description

5548-00-12 5548-00-16 5548-00-20 5548-00-24 5548-00-32

AFS-200/90G AFS-202/90G AFS-204/90G AFS-206/90G AFS-208/90G

SAE J518 Code 61

5549-92

Thread

Socket head cap screw M 6S 12.9 UNC-thread

SAE3 SAE3 SAE3 SAE3 SAE3

G 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

Part number

Thread Length

SAE3

SEA6

5549-92-06

3/8"-16 UNC 38 mm

3/4"–1"

3/4"

5549-92-07

7/16"-14 UNC 45 mm

1 1/4"

1"

5549-92-08

1/2"-13 UNC 45 mm 1 1/2"–2 1/2"

1 1/4"

5549-92-10

5/8"-11 UNC 51 mm

1 1/2"

3"–4"

5548-02 Flange threaded, 90° SAE J518 Code 62 Part number

Description

5548-02-12 5548-02-16 5548-02-20 5548-02-24

AFS-700/90G AFS-702/90G AFS-704/90G AFS-706/90G

196

Thread SAE6 SAE6 SAE6 SAE6

G 3/4" G 1" G 1 1/4" G 1 1/2"

PRODUCT CATALOGUE 2009


HYDROSCAND Quick release fittings and Swivels Quick release fittings and Swivels Product group 520/523/524 The use of quick release fittings is increasing; the possibility of assembling and disassembling a fitting without any tools is essential in many applications, for example in compressed air hand tools, portable hydraulic plants, cranes, tow and marine applications. Hydroscand offers many types of quick release fittings, for example environmentally friendly and drip-free fittings, couplings to be connected during pressure, acid resistant fittings for aggressive materials and other fittings with a working pressure up to /PN 100 MPa, bore/NW 3â&#x20AC;&#x201C;50 mm, ISO standard and HTMA norms.

Materials: Hydroscand's quick release fittings can be delivered in most designs, normally E-coated, which is the name of our coupling surface treatment. The surface treatment is free from Cr6, and is therefore better for both the environment and personal health. Alternative materials are stainless and acid resistant steel with sealings in Nitrile, Viton, EPDM and Teflon.

Connections: Withworth pipe threads (G) are used throughout, but other types of threads are available on request, for example conical pipe threads (R), NPTF, UNF, UNC or metric threads. The air assortment also include conical pipe threads (R), hose fittings as well as hose sockets.

5:20

Standards and certificates: Hydroscand can deliver most fittings according to international standards and with certificates from Det Norske Veritas, Germanischer Lloyd, DVWG and other approvals.

Working pressure/PN: The working pressure/PN is indicated next to each fitting with a safety factor of 4 for rupture. The working pressure refers to connected fitting. Please note that the pressure surges/transients can lead to major mechanical stress in the system. For pressure drop index, see chapter 11.

Hydroscand reserves the right to modify any or all parts of this catalogue without any prior notice.

PRODUCT CATALOGUE 2009

197


Table of contents

Hydraulics page

5551-04/05 5550-02/03 5550-08 5558-34/35 5558-32/33 5558-59 5553-02/03 5553-04/05 5553-06/07 5558-02/03 5558-14/15 5558-16 5551-02 5Cxx 5Cxx 5Cxx 5Txx 5Txx 5Txx 5Txx 5558-22/23 5558-38/39 5558-24 5558-64/65 5558-66/67 5558-69 5TFF 5TFF 5TFF 5TFF 5CX65 5CX65 5TIF 5TIF/5TFF 5TIF 5TIF 5558-18/19 5558-40/41 5558-20 5559-12/13 5559-14 5558-48/49 5558-58 5558-44 5558-80/81 5558-86/87 5Cxx 5Cxx 5558-xx

198

Dust cover, ISO A ISO A Spare part kit Dust cover, ISO B ISO B Spare part kit HANSEN HKP ISO B Dust cover, ISO B HANSEN HKP O-ring/T-ring FASTER NV FASTER NV, protection FASTER NV Spare part kit FASTER QR/PV Push-pull CEJN series 525 Dust cover, CEJN series 525 Spare part kit, CEJN series 525 TEMA standard, T series TEMA Dust cover TEMA Grease nipple Tema Spare part kit FASTER VV FASTER VV, protection FASTER VV Spare part kit FASTER PVVM FASTER PVVM, protection FASTER PVVM Spare part kit TEMA FF TEMA FF, nipple with eleminator TEMA Dust cover TEMA Spare part kit CEJN CEJN Dust cover TEMA IF TEMA, Grease nipple TEMA Dust cover TEMA Spare part kit FASTER 2FFN FASTER 2FFN, protection FASTER 2FFN Spare part kit Bruning NS-series Bruning, protection FASTER 3 FFV FASTER 3FFV, protection FASTER 3FFV Spare part kit FASTER CVV FASTER CVV, protection CEJN Standard CEJN Series 115 Stucchi VP Stucchi, protection MULTIFASTER Multiconnect 2 gates Multiconnect 3 gates Multiconnect Plate, 4 gates Multiconnect 4 gates Multiconnect 6 gates Multiconnect Plate, 6 gates Multiconnect Hydraulic couplings Multiconnect Hydraulic couplings Multiconnect Hydraulic couplings Multiconnect Electrical sockets Multiconnect Electrical sockets Multiconnect Electrical sockets Multiconnect Lock rings Multiconnect Plugs Multiconnect Seal Kit Multiconnect Spare part kit

199 199 199 199 199 199 200 200 200 200 200 200 201 201 201 201 202 202 202 202 203 203 203 203 203 203 203 204 204 204 204 204 205 205 205 205 206 206 206 206 206 207 207 207 207 207 208 208 208 208 209 211 211 211 211 211 211 212 212 212 212 212 212 213 213 213 213

5552 5552 5C10 320 5C10 320 5C10 410 5C10 410

5555 5590 5591 5576-01 5577-01

5TTA 5558-68 5554 5558-76 5558-77

Air pressure/Fluids page TEMA 1100 Compressed air fittings TEMA 1100N Compressed air fittings TEMA 1300/1300E Compressed air fittings TEMA 1600 Compressed air fittings TEMA 1625 Compressed air fittings TEMA 1650 Compressed air fittings TEMA 1700 Compressed air fittings TEMA 1750 Compressed air fittings TEMA 1800/1800E Compressed air fittings TEMA 1800N Compressed air fittings TEMA 1800H High pressure water TEMA 2100N Compressed air fittings TEMA Hose nipple Blow gun Spiral hose Cejn series 320 Cejn series 320 Safety fitting Cejn series 410 Cejn series 410 Safety fitting

214 214 214 215 215 215 216 216 217 217 217 218 218 218 218 218 218 219 219

Swivels page Tema swivel joint High pressure swivel, M – M High pressure swivel, M – F Swivel, Straight, G-threaded Swivel, Elbow 90°, G-threaded

220 220 220 220 220

Miscellaneous valves page TEMA decompression valve Faster VF Burst valve Hose brake valve Back valve F/F Back valve M/M

221 221 221 221 221

PRODUCT CATALOGUE 2009


Product group 520/523/524

Quick release fittings and Swivels Product Group 520 Quick release fitting with dimensions and performance equivalent to ISO 7241-1 A series. Used in agriculture and in industries. Interchangeable with other fittings manufactured according to ISO7241-1 A series.

Dim.

1/4" 3/8" 1/2" 3/4" 1"

Male

Female

PN MPa

5550-02-04 5550-02-06 5550-02-08 5550-02-12 5550-02-16

5550-03-04 5550-03-06 5550-03-08 5550-03-12 5550-03-16

Thread

35.0 31.5 25.0 25.0 23.0

G G G G

1/4" 3/8" 1/2" 3/4" G 1"

F F F F F

71.0 79.5 92.0 108.0 124.0

Product Group 520

5550-08

Dust cover, ISO A

Spare part kit

Yellow

Dim.

Male

Female

Dim.

Spare part kit

5551-04-04 5550-04-06 5550-04-08 5551-04-12 5551-04-16

5551-05-04 5550-05-06 5550-05-08 5551-05-12 5551-05-16

5550-08-04 5550-08-06 5550-08-08 5550-08-12 5550-08-16

1/4" 3/8" 1/2" 3/4" 1"

G-thread, female

mm mm mm mm mm

5551-04/05

Dust cover, for female

ISO a

Length

Product Group 520 Dust cover, for male

5550-02/03

1/4" 3/8" 1/2" 3/4" 1"

Product Group 520 Quick release fitting with dimensions and performance equivalent to ISO 7241-1 B series. Suitable for industrial and mobile hydraulic applications. Interchangeable with other fittings manufactured according to ISO7241-1 B series.

Dim.

1/8" 1/4" 3/8" 1/2" 3/4" 1"

Male

Female

PN MPa

5558-32-02 5558-32-04 5558-32-06 5558-32-08 5558-32-12 5558-32-16

5558-33-02 5558-33-04 5558-33-06 5558-33-08 5558-33-12 5558-33-16

Thread

40.0 35.0 30.0 30.0 25.0 23.0

G G G G G

1/8" 1/4" 3/8" 1/2" 3/4" G 1"

F F F F F F

60.5 70.5 82.5 92.5 111.0 133.0

Product Group 520

5558-59

Dust cover, ISO B

Spare part kit

Red

Dim.

Male

Female

Dim.

Spare part kit

5558-34-04 5558-34-06 5558-34-08 5558-34-12 5558-34-16

5558-35-04 5558-35-06 5558-35-08 5558-35-12 5558-35-16

5558-59-02 5558-59-04 5558-59-06 5558-59-08 5558-59-12 5558-59-16

1/4" 3/8" 1/2" 3/4" 1"

PRODUCT CATALOGUE 2009

G-thread, female

mm mm mm mm mm mm

5558-34/35

Dust cover, for female

ISO B

Length

Product Group 520 Dust cover, for male

5558-32/33

1/8" 1/4" 3/8" 1/2" 3/4" 1"

199

5:20


Quick release fittings and Swivels

Product group 520/523/524 Product Group 520

Quick release fitting with dimensions and performance equivalent to ISO 7241-1 B series. Suitable for industrial and mobile hydraulic applications. Interchangeable with other fittings manufactured according to ISO7241-1 B series.

Dim.

1/8" 1/4" 3/8" 1/2" 3/4" 1"

Male

Female

PN MPa

5553-02-02 5553-02-04 5553-02-06 5553-02-08 5553-02-12 5553-02-16

5553-03-02 5553-03-04 5553-03-06 5553-03-08 5553-03-12 5553-03-16

Thread

27.5 25.5 25.5 34.5 27.5 27.5

G G G G G

1/8" 1/4" 3/8" 1/2" 3/4" G 1"

F F F F F F

5553-02/03 HANSEN HKP ISO B

Length 60.0 71.0 81.0 91.0 108.0 136.0

mm mm mm mm mm mm

Product Group 520

Product Group 520

5553-04/05

5553-06/07

Dust cover, ISO B

Hansen HKP O-ring/T-ring

Dust cover, for male

Red

Dust cover, for female

Dim.

Male

Female

Dim.

O-ring

T-ring

5553-04-04 5553-04-06 5553-04-08 5553-04-12 5553-04-16

5553-05-04 5553-05-06 5553-05-08 5553-05-12 5553-05-16

5553-06-02 5553-06-04 5553-06-06 5553-06-08N 5553-06-12N 5553-06-16N

5553-07-02 5553-07-04 5553-07-06 5553-07-08N 5553-07-12N 5553-07-16N

1/4" 3/8" 1/2" 3/4" 1"

1/8" 1/4" 3/8" 1/2" 3/4" 1"

Product Group 520 Standard fitting for normal hydraulic applications within industries and agriculture. Dim. 1/2" is interchangeable with all ISO 7241-1 A series fittings.

5558-02/03 FASTER NV

Dim. 1 1

1/4" 3/8" 1/2" 3/4" 1" 1/4" 1/2" 2"

Male

Female

PN MPa

5558-02-04 5558-02-06 5558-02-08 5558-02-12 5558-02-16 5558-02-20 5558-02-24 5558-02-32

5558-03-04 5558-03-06 5558-03-08 5558-03-12 5558-03-16 5558-03-20 5558-03-24 5558-03-32

G G G G

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

F F F F F F F F

Length 66.0 78.0 88.0 107.0 132.0 146.0 166.0 200.0

mm mm mm mm mm mm mm mm

Product Group 520

Product Group 520

5558-14/15

5558-16

FASTER NV, protection

FASTER NV Spare part kit

Dust cover, for male

Dust cover, for female

35.0 30.0 30.0 25.0 23.0 22.0 18.0 13.0

Thread

Plastic (1/4"â&#x20AC;&#x201C;3/4") / Metal (1"â&#x20AC;&#x201C;2") Dim.

Male

Female

Dim.

Spare part kit

1 1

5558-14-04 5558-14-06 5558-14-08 5558-14-12 5558-14-16 5558-14-20 5558-14-24 5558-14-32

5558-15-04 5558-15-06 5558-15-08 5558-15-12 5558-15-16 5558-15-20 5558-15-24 5558-15-32

1 1

5558-16-04 5558-16-06 5558-16-08 5558-16-12 5558-16-16 5558-16-20 5558-16-24 5558-16-32

1/4" 3/8" 1/2" 3/4" 1" 1/4" 1/2" 2"

200

1/4" 3/8" 1/2" 3/4" 1" 1/4" 1/2" 2"

PRODUCT CATALOGUE 2009


Product group 520/523/524

Quick release fittings and Swivels Product Group 520

Panel mounted Push-Pull quick release fitting, which means that the hose is protected in case of an accidental disconnection.

5551-02/5558-07 FASTER QR/PV Push-pull

Used with a male part according to ISO 7241-1 A series.

Dim.

1/2"

Male

Female

5551-02-08

5558-07-08

PN MPa

Thread

Length

30.0

G 1/2" F

88.0 mm

Product Group 524

5Cxx

The 525 series is made in a heavy duty steel design. Parts that are exposed to big strains are made of hardened steel, which gives the maximum life-span in tough applications.

Dim.

1/4" 3/8" 1/2" 5/8" 3/4"

DN

Male

6.3 10.0 12.5 16.0 19.0

5C10 5C10 5C10 5C10 5C10

Female 525 525 525 525 525

6202 6204 6205 6207 6209

5C10 5C10 5C10 5C10 5C10

PN MPa

Thread 1/4" 3/8" 1/2" 3/4" G 1"

CEJN series 525

Flow l/m

Length M

Length F

525 525 525 525 525

1202 1204 1205 1207 1209

30 28 25 20 25

G G G G

F F F F F

29 59 100 194 285

48.2 38.0 42.5 47.0 56.5

60.0 61.6 67.6 76.2 92.0

525 525 525 525

1234 1235 1237 1239

28 25 20 25

G 3/8" F G 1/2" F G 3/4" F G 1" F

59 100 194 285

38.0 42.5 47.0 56.5

61.6 67.6 76.2 92.0

5:20

Cejn-series 525 with eliminator

3/8" 1/2" 5/8" 3/4"

10.0 12.5 16.0 19.0

5C10 5C10 5C10 5C10

525 525 525 525

6234 6235 6237 6239

Dust cover, for male

Dust cover, for female

Dim.

1/4" 3/8" 1/2" 5/8" 3/4"

DN 6.3 10.0 12.5 16.0 19.0

5C10 5C10 5C10 5C10

Product Group 524

Product Group 524

5Cxx

5Cxx

Dust cover, CEJN series 525

Spare part kit, CEJN series 525

Male

Female

Dim.

Spare part kit

5C093751051 5C094751051 5C095751051 5C096751051 5C097751051

5C093951001 5C094751001 5C095951001 5C096751001 5C097751001

5C105254900 5C105254901 5C105254902 5C105254903 5C105254904

PRODUCT CATALOGUE 2009

1/4" 3/8" 1/2" 5/8" 3/4"

201


Quick release fittings and Swivels

Product group 520/523/524 Product Group 523

5Txx

Quick release fittings for mobile and industrial applications. TEMA's patented pressure eliminator enables assembly at enclosed and built-up pressure.

Dim. 1

Male

1/8" 1/4" 3/8" 1/2" 3/4" 1" 1/2" 2"

Tema descr.

5T2320 5T2520 5T3820 5T5020 5T7520 5T10020 5T15020 5T20020

Female Tema descr.

PN MPa

TEMA standard, T series Thread G G G G G

Length

2320 2520 3820 5020 7520 10020 15020 20020

5T2310 5T2510 5T3810 5T5010 5T7510 5T10010 5T15010 5T20010

2310 2510 3810 5010 7510 10010 15010 20010

20.0 45.0 35.0 30.0 28.0 25.0 20.0 18.0

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/2" G 2"

F F F F F F F F

59.0 81.0 74.0 82.0 91.0 108.0 173.0 224

mm mm mm mm mm mm mm mm

3821 5021 7521 10021 15021

5T3811 5T5011 5T7511 5T10011 5T15011

3811 5011 7511 10011 15011

35.0 30.0 28.0 25.0 20.0

G 3/8" F G 1/2" F G 3/4" F G 1" F G 1 1/2" F

74.0 82.0 91.0 108.0 173.0

mm mm mm mm mm

T-series with eliminator 1

3/8" 1/2" 3/4" 1" 1/2"

5T3821 5T5021 5T7521 5T10021 5T15021

Dust cover, for male

Product Group 523

Product Group 523

5Txx

5Txx Dust cover, for female

Tema Spare part kit

TEMA Dust cover

Dim.

Male Tema descr.

Female Tema descr.

Dim. Nitrile kit

1

5T125 5T2526 5T3826 5T5026 5T7526 5T10026 5T15025 5T20025

5T2315 5T2516 5T3816 5T5016 5T7516 5T10016 5T15015 5T20015

1/8" 5T11310N

T11310N 5T11310V

T11310V

1/4" 5T2500PSN

2500PSN 5T2500PSV

2500PSV

1/8" 1/4" 3/8" 1/2" 3/4" 1" 1/2" 2"

125 2526 3826 5026 7526 10026 15025 20025

2315 2516 3816 5016 7516 10016 15015 20015

Tema descr. Viton kit

Tema descr.

3/8" 5T3800PSN

3800PSN 5T3800PSV

3800PSV

1/2" 5T5000PSN

5000PSN 5T5000PSV

5000PSV

3/4" 5T7500PSN

1" 5T10000PSN

7500PSN 5T7500PSV 10000PSN 5T10000PSV

7500PSV 10000PSV

1 1/2" 5T15000PSN

15000PSN 5T15000PSV

15000PSV

20000PSN 5T20000PSV

20000PSV

2" 5T20000PSN

Product Group 523

5Txx TEMA Grease nipple Part number Tema descr.

Type

5TGR 5TGR 5TGR 5TGR 5TGR 5TGR

Complete kit Tube with grease 400g Grease nipple 3/8" Grease nipple 1/2" Grease nipple 3/4" Grease nipple 1"

202

1 2400G 3 5 7 10

GR 1 GR 2 T GR 3 T GR 5 T GR 7 T GR 10

Dim.

PRODUCT CATALOGUE 2009


Product group 520/523/524

Quick release fittings and Swivels Product Group 520 Threaded quick release fitting for standardised hydraulic applications. Thanks to the threads, it is possible to assemble the valve even when there is some pressure left in the system. The threading also prevents accidental disconnection.

5558-22/23 FASTER VV Threaded

Dim.

1/4" 3/8" 1/2" 3/4" 1"

Male

Female

PN MPa

5558-22-04 5558-22-06 5558-22-08 5558-22-12 5558-22-16

5558-23-04 5558-23-06 5558-23-08 5558-23-12 5558-23-16

35.0 30.0 30.0 25.0 23.0

G G G G

1/4" 3/8" 1/2" 3/4" G 1"

F F F F F

Length 60.0 78.0 88.0 110.0 132.0

mm mm mm mm mm

Product Group 520

Product Group 520

5558-38/39

5558-24

FASTER VV, protection

FASTER VV Spare part kit

Dust cover, for male

Dust cover, for female

Thread

Metal Dim.

Male

Female

Dim.

Spare part kit

5558-38-04 5558-38-06 5558-38-08 5558-38-12 5558-38-16

5558-39-04 5558-39-06 5558-39-08 5558-39-12 5558-39-16

5558-24-04 5558-24-06 5558-24-08 5558-24-12 5558-24-16

1/4" 3/8" 1/2" 3/4" 1"

1/4" 3/8" 1/2" 3/4" 1"

Product Group 523 Threaded quick release fitting possible to connect during very high static pressures. Used for e.g. hydraulic jacks.

5558-64/65 FASTER PVVM NPT-threaded

Dim.

1/4" 3/8"

Male

Thread

5558-64-04 5558-64-06

Female

1/4" NPT F 3/8" NPT F

5558-65-04 5558-65-06

Thread

PN MPa

Length

1/4" NPT M 3/8" NPT M

35.0 30.0

74.0 mm 82.0 mm

Product Group 520

Product Group 520

5558-66/67

5558-69

FASTER PVVM, protection

FASTER PVVM Spare part kit

Dust cover, for male

Dust cover, for female

Metal

Dim.

Male

Female

Dim.

Spare part kit

1/4" 3/8"

5558-66-04 5558-66-06

5558-67-04 5558-67-06

1/4" 3/8"

5558-69-04 5558-69-06

Product Group 523

5TFF

Drip-free quick release fitting for industrial and mobile applications.

TEMA FF Drip-free

Dim.

1/2" 3/4" 1"

Male

Tema descr.

5TFF5020 5TFF7520 5TFF10020

PRODUCT CATALOGUE 2009

FF5020 FF7520 FF10020

Female 5TFF5010 5TFF7510 5TFF10010

Tema descr.

PN MPa

Thread

Length

FF5010 FF7510 FF10010

40.0 40.0 30.0

G 1/2" F G 3/4" F G 1" F

144.0 mm 169.0 mm 230.0 mm

203

5:20


Quick release fittings and Swivels

Product group 520/523/524 Product Group 523

5TFF

Same as 5TFF, but with TEMA's patented pressure eliminator that enables assembly in enclosed and built-up pressures.

TEMA FF Nipple with eliminator

Dim.

1/2" 3/4" 1"

Male

Tema descr.

5TFF5021 5TFF7521 5TFF10021

FF5021 FF7521 FF10021

Female 5TFF5010 5TFF7510 5TFF10010

Tema descr.

PN MPa

Thread

Length

FF5010 FF7510 FF10010

40.0 40.0 30.0

G 1/2" F G 3/4" F G 1" F

179.0 mm 215.0 mm 269.0 mm

Product Group 523 Dust cover, for male

Product Group 523

5TFF

5TFF

TEMA Spare part kit

TEMA Dust cover

Dust cover, for female

Dim. Male

Tema descr.

1/2" 5TFF5026 FF5026 3/4" 5TFF7526 FF7526 1" 5TFF10026 FF10026

Female

Tema descr.

5TFF5016 5TFF7516 5TFF10016

FF5016 FF7516 FF10016

Dim.

Spare part kit

Tema descr.

1/2" 3/4" 1"

5TFF5000 PSPU 5TFF7500 PSPU 5TFF10000 PSPU

FF5000 PSPU FF7500 PSPU FF10000 PSPU

Product Group 524

5CX65

Drip-free quick release fitting for industrial and mobile applications. The X65 series is made according to ISO 16028, which makes it possible to assembly it with other manufactures. Equipped with an extra lock function that protects against accidental disconnection.

CEJN Drip-free, ISO 16028

Dim. DN

1/4" 6.3 3/8" 10.0 3/8" 10.0 1/2" 12.5 1/2" 12.5 5/8" 16.0 3/4" 19

Male 5C10 5C10 5C10 5C10 5C10 5C10 5C10

Female 265 365 365 565 565 665 765

6202 6204 6205 6205 6207 6201 6203

Dust cover, for male

5C10 5C10 5C10 5C10 5C10 5C10 5C10

PN MPa

265 365 365 565 565 665 765

1202 1204 1205 1205 1207 1201 1203

31.5 25.0 25.0 25.0 25.0 25.0 25.0

Thread G G G G G G

1/4" 3/8" 1/2" 1/2" 3/4" 3/4" G 1"

F F F F F F F

Flow l/m Length male Length female 12 23 23 45 45 74 100

48.7 55.1 58.5 71.4 72.9 74.9 93.1

58.1 67.5 70.9 74.8 76.3 79.8 99.0

Product Group 524

5CX65 CEJN Dust cover

Dust cover, for female

Dim. DN

Male

5C09 5C09 5C09 5C09 5C09

1/4" 6,3 3/8" 10 1/2" 12,5 5/8" 16 3/4" 19

204

ISO 16028 Female

265 365 565 665 765

1050 1050 1050 1050 1050

5C09 5C09 5C09 5C09 5C09

265 365 565 665 765

1000 1000 1000 1000 1000

PRODUCT CATALOGUE 2009


Product group 520/523/524

Quick release fittings and Swivels Product Group 523

5TIF

Same as 5TIF, but with TEMA's patented pressure eliminator that enables assembly in enclosed and built-up pressures.

TEMA IF

Drip-free ISO 16028 with eliminator Dim.

1/4" 3/8" 1/2" 5/8" 3/4" 1" 1"

Male

Tema descr.

5TIF2521 5TIF3821 5TIF5021 5TIF6321 5TIF7521 5TIF10021 5TIF10021125

IF2521 IF3821 IF5021 IF6321 IF7521 IF10021 IF10021-125

Female 5TIF2511 5TIF3811 5TIF5011 5TIF6311 5TIF7511 5TIF10011 5TIF10021125

Tema descr.

PN MPa

IF2511 IF3811 IF5011 IF6311 IF7511 IF10011 IF10021-125

31.5 25.0 25.0 25.0 25.0 20.0 20.0

Thread G G G G G

1/4" 3/8" 1/2" 3/4" 3/4" G 1" G 1 1/4"

F F F F F F F

Product Group 523

5TIF/5TFF TEMA, Grease nipple Dim.

Serie

Part number

IF / X65 IF / X65 FF IF / X65 FF IF / X65 IF / X65 FF

5TGRIF38 5TGRIF50 5TGRF5 5TRGIF63 5TGRF7 5TGRIF75 5TGRIF100 5TGRF10

3/8" 1/2" 1/2" 5/8" 3/4" 3/4" 1" 1"

5:20

Used with TEMA 5TIF/5TFF to prevent that the locking sleeve gets stuck. The cause of this can be road dust or frozen water.

Dust cover, for male

Product Group 523

Product Group 523

5TIF

5TIF

TEMA Spare part kit

TEMA Dust cover

Dust cover, for female

Dim. Male

1/4" 3/8" 1/2" 5/8" 3/4" 1"

Tema descr.

5TIF2526 IF2526 5TIF3826 IF3826 5TIF5026 IF5026 5TIF6326 IF6326 5TIF7526 IF7526 5TIF10026 IF10026

PRODUCT CATALOGUE 2009

Female

Tema descr.

5TIF2516 5TIF3816 5TIF5016 5TIF6316 5TIF7516 5TIF10016

IF2516 IF3816 IF5016 IF6316 IF7516 IF10016

Dim.

Spare part kit

Tema descr.

5TIF2500PSPU 5TIF3800PSPU 5TIF5000PSPU 5TIF6300PSPU 5TIF7500PSPU 5TIF10000PSPU

IF2500PSPU IF3800PSPU IF5000PSPU IF6300PSPU IF7500PSPU IF10000PSPU

1/4" 3/8" 1/2" 5/8" 3/4" 1"

205


Quick release fittings and Swivels

Product group 520/523/524 Product Group 520

5558-18/19

Drip-free quick release fitting for hydraulic applications. Does not leak during disassembly, but is easy to clean thanks to the flat sealing surface.

FASTER 2FFN Drip-free with safety lock

Dim.

3/8" 1/2" 3/4" 1"

Male

Female

5558-18-06 5558-18-08 5558-18-12 5558-18-16

5558-19-06 5558-19-08 5558-19-12 5558-19-16

PN MPa

Thread

20.0 22.0 30.0 30.0

G 3/8" F G 1/2" F G 3/4" F G 1" F

Length 107.0 125.0 174.0 217.0

mm mm mm mm

Product Group 520

Product Group 520

5558-40/41

5558-20

FASTER 2FFN, protection

FASTER 2FFN Spare part kit

Dust cover, for male

Dust cover, for female

Metal

Dim.

Male

Female

Dim.

Male kit

Female kit

3/8" 1/2" 3/4" 1"

5558-40-06 5558-40-08 5558-40-12 5558-40-16

5558-41-06 5558-41-08 5558-41-12 5558-41-16

3/8" 1/2" 3/4" 1"

5558-20-06M 5558-20-08M 5558-20-12M 5558-20-16M

5558-20-06F 5558-20-08F 5558-20-12F 5558-20-16F

Product Group 520

5559-12/13

Drop-free quick release fitting for industrial and mobile applications.

Bruning NS-series Drip-free

Dim.

3/8" 1/2" 3/4" 1"

Male

Female

5559-12-06 5559-12-08 5559-12-12 5559-12-16

5559-13-06 5559-13-08 5559-13-12 5559-13-16

PN MPa

Thread

17.5 17.5 17.5 17.5

G 3/8" F G 1/2" F G 3/4" F G 1" F

Length 73.0 95.0 101.0 115.0

mm mm mm mm

Product Group 520

5559-14 Bruning, protection Dim.

Male/female

3/8" 1/2" 3/4" 1"

5559-14-06 5559-14-08 5559-14-12 5559-14-16

206

PRODUCT CATALOGUE 2009


Product group 520/523/524

Quick release fittings and Swivels Product Group 520 Drip-free threaded quick release fitting especially suited for systems with high pulsating pressures. The fitting can be assembled even when it is put into pressure. The threading also prevents accidental disconnection.

5558-48/49 FASTER 3 FFV Drip-free

Dim. 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2"

Male

Female

5558-48-06 5558-48-08 5558-48-12 5558-48-16 5558-48-20 5558-48-24

5558-49-06 5558-49-08 5558-49-12 5558-49-16 5558-49-20 5558-49-24

PN MPa

Thread

30.0 30.0 30.0 40.0 40.0 40.0

G 3/8" F G 1/2" F G 3/4" F G 1" F G 1 1/4" F G 1 1/2" F

Length 134.9 151.5 181.5 196.7 201.7 229.4

mm mm mm mm mm mm

Product Group 520

Product Group 520

5558-58

5558-44

FASTER 3FFV, protection

FASTER 3FFV Spare part kit

Male/female Dim.

Male/female

Dim.

Male kit

Female kit

1

5558-58-06 5558-58-08 5558-58-12 5558-58-16 5558-58-24

1

5558-44-06M 5558-44-08M 5558-44-12M 5558-44-16M 5558-44-24M

5558-44-06F 5558-44-08F 5558-44-12F 5558-44-16F 5558-44-24F

3/8" 1/2" 3/4" 1" 1/2"

3/8" 1/2" 3/4" 1" 1/2"

Product Group 524

5558-80/81

Material: Steel zinc plated / yellow chromated, hardened valve Seal: Nitrile, upon request Viton and EPDM as well Working temp: -25째C to 125째C. Higher temperatures upon request.

FASTER CVV

Threaded for high pulsation pressure Dim.

04 06 08 16 16 16 16 24 24

Male

Female

5558-80-04 5558-80-06 5558-80-08 5558-80-12 5558-80-16 5558-80-17 5558-80-36 5558-80-20 5558-80-22

5558-81-04 5558-81-06 5558-81-08 5558-81-12 5558-81-16 5558-81-17 5558-81-36 5558-81-20 5558-81-22

PN MPa

Thread

Flow l/m

48.0 38.0 34.0 33.0 33.0 33.0 33.0 37.0 37.0

M 14 x 1.5 F G 3/8" M G 1/2" F G 3/4" F G 1" F G 1" F M 36 x 2 M 25S M 42 x 2 M 30S M 52 x 2 M 38S

13 30 75 250 250 250 250 450 450

Length 90.5 92.5 102.6 144.8 150.8 150.8 178.8 196.0 196.0

mm mm mm mm mm mm mm mm mm

Other info 60째 cone O-ring O-ring Bulkhead Viton Viton

Product Group 520

5558-86/87

Dust cover, for male

FASTER CVV, protection Plastic

Dust cover, for female

Dim.

Male

Female

5558-86-04 5558-86-06 5558-86-08 5558-86-16 5558-86-24

5558-87-04 5558-87-06 5558-87-08 5558-87-16 5558-87-24

04 06 08 16 24

PRODUCT CATALOGUE 2009

207

5:20


Quick release fittings and Swivels

Product group 520/523/524 Product Group 524

5Cxx

Quick release fitting for low and medium working pressures. Used in industrial and mobile applications, such as trailers and cranes.

CEJN Standard Drip-free

Dim.

Male

1/4" 3/8" 1/2" 3/4" 1"

5C10 5C10 5C10 5C10 5C10

Female 325 415 415 605 705

6202 6204 6205 6201 6203

5C10 5C10 5C10 5C10 5C10

PN MPa

325 325 325 325 325

1202 1204 1205 1201 1203

25.0 25.5 25.0 32.0 32.0

Thread G G G G

1/4" 3/8" 1/2" 3/4" G 1"

F F F F F

Length 89.0 102.0 109.0 131.0 146.0

mm mm mm mm mm

Product Group 524 Drip-free quick release fitting for very high pressures.

5Cxx

Especially suited for e.g. hydraulic pumps, lever jacks and salvage equipment.

CEJN Series 115

Drip-free. High pressure hydraulics. Bore 3 mm Dim.

Male

1/4" 3/8" 1/4" 1/4"

5C10 5C10 5C10 5C10

Female 115 6202 115 6204 115 6202 1151 222

5C10 5C10 5C10 5C10

PN MPa

115 115 116 115

1202 1204 1202 1202

100.0 100.0 150.0 200.0

Thread G G G G

1/4" 3/8" 1/4" 1/4"

F F F F

Material: Steel QPC/yellow Seal: Nitrile, -40° – +100°C

Length 75.0 79.0 75.0 79.0

mm mm mm mm

Product Group 520

STUCCHI VP Threaded fitting for high pulsating pressure "Hammer hydraulics" Dim. /4" (07) 1 3/8" (09) 3/8" (09) 1/2" (13) 1/2" (13) 3/4" (15) 1" (17) 1 1/4" (21) 1 1/2" (30)

Male

Female

5S801900001 5S807300003 5S807300005 5S807300007 5S807300009 5S807300010 5S807300013 5S807300015 5S807300017

5S801900000 5S807300002 5S807300004 5S807300006 5S807300008 5S807300011 5S807300012 5S807300014 5S807300016

PN MPa 60.0 55.0 55.0 55.0 55.0 55.0 50.0 47.0 40.0

Thread G G G G G G

1/4" 3/8" 1/2" 1/2" 3/4" 3/4" G1" G 1 1/4" G 1 1/2"

F F F F F F F F F

Product Group 520 Dust cover, for male

stucchi, protection Aluminium. Red

Dust cover, for female

Dim.

1/4" (07) 3/8" (09) 1/2" (13) 3/4" (15) 1" (17) 1 1/4" (21) 1 1/2" (30)

208

Male

Female

5S815300051 5S815300053 5S815300055 5S815300057 5S815300059 5S815300061 5S815300063

5S815300050 5S815300052 5S815300054 5S815300056 5S815300058 5S815300060 5S815300062

PRODUCT CATALOGUE 2009


Product group 520/523/524

Quick release fittings and Swivels Product Group 520 A system that enables you to connect several drip-free quick release fittings and/or electric contacts, in a one-quick operation. Used in e.g. mobile and industrial applications where quick tool exchanges are needed. Available in a number of different dimensions, from 1/4" to 1 1/2". Safety factor: 3:1

Thread

5558-xx MULTIFASTER Drip-free quick release fittings for multi-assembling

Dim.

Part number

Type

Connection

3/8" 3/8" 1/2" 1/2"

5558-90-06 5558-91-06 5558-90-08 5558-91-08

2P 2P 2P 2P

Complete Complete Complete Complete

2 4 2 4

Hydraulic Hydraulic Hydraulic Hydraulic

fittings fittings fittings fittings

G G G G

3/8" 3/8" 1/2" 1/2"

F F F F

35.0 35.0 35.0 35.0

U-handle U-handle U-handle U-handle

3/4" 1" 3/8" 1/2"

5558-89-12 5558-89-16 5558-88-06 5558-88-08

3P 3P 3P 3P

Complete Complete Complete Complete

1 1 4 4

Hydraulic Hydraulic Hydraulic Hydraulic

fittings fittings fittings fittings

G 3/4" G 1" G 3/8" G 1/2"

F F F F

35.0 35.0 35.0 35.0

Straight handle Straight handle U-handle U-handle

3/8" 1/2"

5558-70-06 5558-70-08

3P Complete 3P Complete

G 3/8" F G 1/2" F

35.0 35.0

U-handle U-handle

2 Hydraulic fittings 2 Hydraulic fittings

3/8" 5558-91-86 3P Complete 8 Hydraulic fittings G 3/4" 5558-99-69 3P Complete 2 Hydraulic fittings G 3/4" 5558-99-70 3P Complete 2 Hydraulic fittings 1 pcs G 1 pcs

1/2" 1/2" 1/2"

5558-99-97 3P Complete 3 1 5558-99-97M 3P Male part 3 1

PRODUCT CATALOGUE 2009

Handle

Flow l/m 40 40 70 70 105 150 40 70 40 70

F F F F

35.0 U-handle 35.0 Straight handle 35.0 Straight handle 35.0

40 105 105 150

G 1/2" F G 1/2" F G 1/2" F

35.0 Straight handle 35.0 Straight handle 35.0

70 70 70

Hydraulic fittings 1 pcs G 1/2" F 35.0 Straight handle Electrical socket 2 pcs G 3/4" F 1 pcs EL-3pol Hydraulic fittings 1 pcs G 1/2" F 35.0 Electrical socket 2 pcs G 3/4" F 1 pcs EL-3pol

70 105

5558-99-92 3P Complete 6 Hydraulic fittings 5558-99-92F 3P Female part 6 Hydraulic fittings 5558-99-92M 3P Male part 6 Hydraulic fittings

3/8" 3/4" 3/4" G 1"

PN MPa

70 105

209

5:20


Quick release fittings and Swivels

Product group 520/523/524

MULTICONNECT Applications

Functions

This multi-connect fitting can be used on all types of applications when there is a need to change multi-lined tools, on for example snow ploughs, excavators and cranes.

Quick: Connecting and disconnection 2 to 10 hydraulic lines in one instant. Can also be connected during working pressure. Versatile: Can be used for both hydraulic and electrical applications. Environmentally friendly: Drip-free fittings minimizes leakage and prevents dirt from entering the system. Safety: Precludes faulty connections.

Ergonomic handle for easy connection even during working pressure

Safety lock preventing unintentional disconnection

Drip-free hydraulic "flat-face" fitting

Additional electrical sockets. 7 wires, 15 Amp (only type "GR")

Guide stick

Protective housing

What is shown on the following pages is only a small portion of the MultiConnect product range that Hydroscand offer. Contact your nearest Hydroscand office for more information.

210

PRODUCT CATALOGUE 2009


Product group 520/523/524

Part number

Description

Quick release fittings and Swivels Product Group 520

Product Group 520

Multiconnect 2 gates

Multiconnect 4 gates

DP type

DP type

Thread

WP plate WP fitting

Part number

5SDP291000M DP2-9 2x9 mobile

3/8" BSP

70.7 MPa 35.0 MPa

5SDP491000M DP4-9 4x9 mobile

Description

3/8" BSP 104.0 MPa 35.0 MPa

5SDP291000F

WP plate WP fitting

3/8" BSP 104.0 MPa 35.0 MPa

3/8" BSP

70.7 MPa 35.0 MPa

5SDP491000F

5SDP2131000M DP2-13 2x13 mobile 1/2" BSP

91.6 MPa 33.0 MPa

5SDP4131000M DP4-13 4x13 mobile 1/2" BSP

91.6 MPa 33.0 MPa

5SDP2131000F DP2-13 2x13 fixed

91.6 MPa 33.0 MPa

5SDP4131000F DP4-13 4x13 fixed

91.6 MPa 33.0 MPa

DP2-9 2x9 fixed

1/2" BSP

Accessories

DP4-9 4x9 fixed

Thread

1/2" BSP

Accessories

5S815606028

Protection cover for DP2-9 fixed

5S815606038

Protection cover for DP4-9 fixed

5S815606029

Parking station for DP2-9 mobile

5S815606039

Parking station for DP4-9 mobile

5S815606036

Protection cover for DP2-13 fixed

5S815606040

Protection cover for DP4-13 fixed

5S815606037

Parking station for DP2-13 mobile

5S815606041

Parking station for DP4-13 mobile

Part number

Description

Product Group 520

Product Group 520

Multiconnect 3 gates

Multiconnect 6 gates

GR type

GR type

Thread

WP plate WP fitting

Part number

5SGR391000M GR3-9 3x9 mobile

3/8" BSP

66.5 MPa 35.0 MPa

5SGR691000M GR6-9 6x9 mobile

3/8" BSP 149.8 MPa 35.0 MPa

5SGR391000F

3/8" BSP 149.8 MPa 35.0 MPa

GR3-9 3x9 fixed

Description

Thread

WP plate WP fitting

3/8" BSP

66.5 MPa 35.0 MPa

5SGR691000F

5SGR391001M GR3-13 3x13 mobile 1/2" BSP

66.5 MPa 33.0 MPa

5SGR6131000M GR6-13 6x13 mobile 1/2" BSP 124.0 MPa 33.0 MPa

5SGR391001F

66.5 MPa 33.0 MPa

5SGR6131000F GR6-13 6x13 fixed

GR3-13 3x13 fixed

1/2" BSP

Accessories

GR6-9 6x9 fixed

1/2" BSP 124.0 MPa 33.0 MPa

Accessories

5S815606008

Protection cover for GR3-9 fixed

5S815606000

Protection cover for GR6-9 fixed

5S815606009

Parking station for GR3-9 mobile

5S815606001

Parking station for GR6-9 mobile

5S815606002

Protection cover for GR6-13 fixed

5S815606003

Parking station for GR6-13 mobile

GR Special GR Special is a system that enables unique assemblies of MultiConnections. The choice of plate is made by the number of connections needed. The choice of couplings is made by the size and thread needed. Below is only two examples from our GR Special product range; contact your nearest Hydroscand office for more information.

Product Group 520

9

9

15

Multiconnect Plate, 4 gates

17

Part number

GRI type Description

9

17

15

15

17

Description

Multiconnect Plate, 6 gates GRM type

WP, MPa

Connections

WP, MPa

Connections

5S806000016 Connection plate fixed

33.0

2DN, 1DN15, 1DN 17

5S806000032 Connection plate fixed

33.0

2DN, 2DN15, 2DN 17

5S806000017 Connection plate mobile

33.0

2DN, 1DN15, 1DN 17

5S806000033 Connection plate mobile

33.0

2DN, 2DN15, 2DN 17

Accessories

Part number

Product Group 520

9

Accessories

5S815606016

Protection cover for GRI4 fixed

5S815606018

Protection cover for GRM6 fixed

5S815606001

Parking station for GRI4 mobile

5S815606013

Parking station for GRM6 mobile

PRODUCT CATALOGUE 2009

211

5:20


Quick release fittings and Swivels

Product group 520/523/524

Product Group 520

Product Group 520

Multiconnect Hydraulic couplings

Multiconnect Hydraulic couplings

For plate DP2-9, GR3-9, DP4-9, GR6-9 Connection DN9

For plate GRI4 and GRM6 Connection DN9

Part number

Type

Part number

Type

5S805000052

Female

G 3/8" F

Thread

WP, MPa 35.0

Lock nut part no. 5S808200002

5S805000074

Female

G 3/8" F

Thread

WP, MPa 35.0

Lock nut part no. 5S808200004

5S805000053

Male

G 3/8" F

35.0

5S808200003

5S805000075

Male

G 3/8" F

35.0

5S808200005

5S805000050

Female

G 1/2" F

35.0

5S808200006

5S805000072

Female

G 1/2" F

35.0

5S808200008

5S805000051

Male

G 1/2" F

35.0

5S808200007

5S805000073

Male

G 1/2" F

35.0

5S808200009

Product Group 520

Multiconnect Hydraulic couplings For all plates Part number

Type

5S805000056

Female

G 1/2" F

33.0

DN13

5S808200010

5S805000057

Male

G 1/2" F

33.0

DN13

5S808200011

5S805000058

Female

G 3/4" F

33.0

DN13

5S808200012

5S805000059

Male

G 3/4" F

33.0

DN13

5S808200013

5S805000078

Female

G 3/4" F

33.0

DN15

5S808200014

5S805000079

Male

G 3/4" F

33.0

DN15

5S808200015

5S805000082

Female

G 1" F

33.0

DN17

5S808200016

5S805000083

Male

G 1" F

33.0

DN17

5S808200017

5S805000084

Female

G 1 1/4" F

30.0

DN21

5S808200018

5S805000085

Male

G 1 1/4" F

30.0

DN21

5S808200019

Part number

Type

5S806422000 5S806422001

Thread WP, MPa Connection

Lock nut part no.

Product Group 520

Product Group 520

Multiconnect Electrical sockets

Multiconnect Electrical sockets

For plate GR3-9 and GR6-9

For plate GR3-13 and GR6-13

Connection

Socket.

Part number

Type

Female

DN9

Male

DN9

5S806422012

Female

DN9

7 wires, 15 Amp

5S806422013

Male

DN9

7 wires, 15 Amp

Connection

Socket.

6 wires, 15 Amp

5S806422010

6 wires, 15 Amp

5S806422011

Female

DN13

6 wires, 15 Amp

Male

DN13

6 wires, 15 Amp

Product Group 520

Multiconnect Electrical sockets For plate GRI4 and GRM6 Part number

Type

Connection

Socket.

5S806422000 5S806422007

Female

DN9

6 wires, 15 Amp

Male

DN9

6 wires, 15 Amp

5S806422012

Female

DN9

7 wires, 15 Amp

5S806422019

Male

DN9

7 wires, 15 Amp

212

This is only a small portion of the MultiConnect product range that Hydroscand offer. Contact your nearest Hydroscand office for more information.

PRODUCT CATALOGUE 2009


Product group 520/523/524

Quick release fittings and Swivels Product Group 520

Multiconnect Lock rings With locking washer Part number

Connection

5S500600005 5S500600006 5S500600023 5S500600018 5S500600035

DN9 DN13 DN15 DN17 DN21 Product Group 520

Multiconnect Plugs Part number

Description

5S525000129 5S525100088 5S525000136 5S525100089 5S525000137 5S525100090 5S525000138 5S525100091

Plug Plug Plug Plug Plug Plug Plug Plug

Connection

DN9 fixed DN9 mobile DN13 fixed DN13 mobile DN15 fixed DN15 mobile DN17 fixed DN17 mobile

DN9 DN9 DN13 DN13 DN15 DN15 DN17 DN17

5:20

Product Group 520

Multiconnect Seal KIT Part number

Description

5S815700337 5S815700339 5S815700341 5S815700655

Seal Seal Seal Seal

kit kit kit kit

for for for for

FAP FAP FAP FAP

male male male male

part, part, part, part,

DN9 DN13 DN17 DN21

Product Group 520

Multiconnect Spare part KIT Part number

Description

5S815700582

Spare part kit for FAP female part, DN9

5S815700583

Spare part kit for FAP male part, DN9

5S815700584

Spare part kit for FAP female part, DN13

5S815700585

Spare part kit for FAP male part, DN13

5S815700662

Spare part kit for FAP female part, DN15

5S815700663

Spare part kit for FAP male part, DN15

5S815700664

Spare part kit for FAP female part, DN17

5S815700665

Spare part kit for FAP male part, DN17

PRODUCT CATALOGUE 2009

This is only a small portion of the MultiConnect product range that Hydroscand offer. Contact your nearest Hydroscand office for more information.

213


Quick release fittings and Swivels

Product group 520/523/524

Product Group 523

Product Group 523

TEMA 1300/1300E

TEMA 1100

Compressed air fittings

Compressed air fittings

Bore: 6.8 mm PN = 3 MPa E = One-handed

Bore: 5.5 mm PN = 3 MPa Part number Tema descr. Type

Seal

5T1100 5T1100A 5T1100V 5T1100AV

1100 1100A 1100V 1100AV

Female Female Female Female

NBR NBR Viton Viton

5T11110 5T11410 5T11005 5T11006

11110 11410 11005 11006

Male Male Male Male

5T11310N 5T11310V

11310N 11310V

O-ring O-ring

Connection G 1/8"F G 1/4"M G 1/8"F G 1/4"M G 1/8"M G 1/8"F Hose 5 mm Hose 6 mm

NBR Viton

NB! The 1100 series is not connectable with the 1100N series.

Product Group 523

TEMA 1100N Compressed air fittings Bore: 5.5 mm PN = 3 MPa M = Brass, chromium-plated

Part number Tema descr. Type

Seal

5T1100N 5T1100NA 5T1100NV 5T1100NAV

Female Female Female Female

NBR NBR Viton Viton

G 1/8"F G 1/4"M G 1/8"F G 1/4"M

5T11410MEP 11410MEP 5T11410MN 11410MN 5T11410MV 11410MV

Male Male Male

NBR EPDM Viton

G 1/8"F G 1/8"F G 1/8"F

5T11310EP 5T11310N 5T11310V

O-ring O-ring O-ring

EPDM NBR Viton

1100N 1100NA 1100NV 1100NAV

11310EP 11310N 11310V

Connection

Part number Tema descr. Type

Seal

Connection

5T1300 5T1300A 5T1300B 5T1300E 5T1300V

1300 1300A 1300B 1300E 1300V

Female Female Female Female Female

NBR NBR NBR NBR Viton

G 1/4"F G 3/8"M G 3/8"F G 1/4"F G 1/4"F

5T1300EA 5T1300EB 5T1300EC 5T1300ED

1300EA 1300EB 1300EC 1300ED

Female Female Female Female

NBR NBR NBR NBR

R 3/8"M G 3/8"F R 1/4"M R 1/2"M

5T1300EK06 1300EK06 5T1300EK08 1300EK08 5T1300EK10 1300EK10 5T1300EK12 1300EK12

Female Female Female Female

Hose 6 Hose 8 Hose 10 Hose 2

5T13110 5T13210 5T13220 5T13230

13110 13210 13220 13230

Male Male Male Male

R G R R

1/8"M 1/4"M 3/8"M 1/2"M

5T13405 5T13410 5T13420 5T13430

13405 13410 13420 13430

Male Male Male Male

G G G G

1/8"F 1/4"F 3/8"F 1/2"F

5T13006 5T13008 5T13010 5T13012

13006 13008 13010 13012

Male Male Male Male

5T13310

13310

Seal NBR

Hose 6 Hose 8 Hose 10 Hose 12

mm mm mm mm

mm mm mm mm

NB! The 1300/1300E series is not connectable with the 1300N series.

NB! The 1100N series is not connectable with the 1100 series.

214

PRODUCT CATALOGUE 2009


Product group 520/523/524

Quick release fittings and Swivels Product Group 523

Product Group 523

TEMA 1600

TEMA 1650

Compressed air fittings

Compressed air fittings

Bore flow: 6.7 mm PN = 3 MPa S = Safety nipple. Eur-standard

Part number

Tema descr.

Type

Connection

5T1600 5T1600A 5T1600B 5T1600C 5T1600D 5T1600F

1600 1600A 1600B 1600C 1600D 1600F

Female Female Female Female Female Female

5T1600K06 5T1600K08 5T1600K10 5T1600K12

1600K06 1600K08 1600K10 1600K12

Female Female Female Female

5T16110 5T16210 5T16220 5T16230

16110 16210 16220 16230

Male Male Male Male

5T16405 5T16410 5T16420 5T16430 5T16410S

16405 16410 16420 16430 16410S

Male Male Male Male Male

5T16006 5T16008 5T16010 5T16012

16006 16008 16010 16012

Male Male Male Male

5T13320 5T18320

13320 18320

Seal 1/4" Seal 3/8"

G 1/4"F R 3/8"M G 3/8"F R 1/2"M R 1/4"M G 1/2"F Hose 6 Hose 8 Hose 10 Hose 12

mm mm mm mm

R 1/8" M R 1/4"M R 3/8"M R 1/2"M G G G G G

1/8"F 1/4"F 3/8"F 1/2"F 1/4"F

Hose 6 Hose 8 Hose 10 Hose 12

mm mm mm mm

PN = 3 MPa Part number

Tema descr.

Type

Connection

5T1650D 5T1650A 5T1650C

1650D 1650A 1650C

Female Female Female

R 1/4"M R 3/8"M R 1/2"M

5T1650 5T1650B 5T1650F

1650 1650B 1650F

Female Female Female

G 1/4"F G 3/8"F G 1/2"F

5T1650K06 5T1650K08 5T1650K10 5T1650K12

1650K06 1650K08 1650K10 1650K12

Female Female Female Female

5T165110 5T165210 5T165220 5T165230

165110 165210 165220 165230

Male Male Male Male

R R R R

1/8"M 1/4"M 3/8"M 1/8"M

5T165405 5T165410 5T165420 5T165430

165405 165410 165420 165430

Male Male Male Male

G G G G

1/8"F 1/4"F 3/8"F 1/2"F

5T165006 5T165008 5T165010 5T165012

165006 165008 165010 165012

Male Male Male Male

Hose 6 Hose 8 Hose 10 Hose 12

Hose 6 Hose 8 Hose 10 Hose 12

mm mm mm mm

mm mm mm mm

Connectable with Atlas Copco's QIC 10 fittings.

Product Group 523

TEMA 1625 Compressed air fittings Bore flow: 6.7 mm PN = 3 MPa S = Safety nipple. Eur-standard

Part number

Tema descr.

Type

Connection

5T1625KAAK13S 1625KAAK13SPN Female 5T1625KAAK17S 1625KAAK17SPN Female 5T1625KAAK21S 1625KAAK21SPN Female

G 1/4"M G 3/8"M G 1/2"M

5T1625KAIW13S 1625KAIW13SPN Female 5T1625KAIW17S 1625KAIW17SPN Female 5T1625KAIW21S 1625KAIW21SPN Female

G 1/4"F G 3/8"F G 1/2"F

5T1625KATF06S 5T1625KATF08S 5T1625KATF10S 5T1625KATF13S

1625KATF06SPN 1625KATF08SPN 1625KATF10SPN 1625KATF13SPN

Female Hose 1/4" Female Hose 5/16" Female Hose 3/8" Female Hose 1/2"

All fittings with non-return valve are connectable with the 1600 series.

PRODUCT CATALOGUE 2009

215

5:20


Quick release fittings and Swivels

Product group 520/523/524

Product Group 523

Product Group 523

TEMA 1700

TEMA 1750

Compressed air fittings

Compressed air fittings

PN = 3 MPa

PN = 3 MPa

Part number Tema descr. Type

Seal

Connection

5T1700 5T1700A 5T1700B 5T1700C 5T1700D 5T1700F 5T1700K10 5T1700K12 5T1700K16 5T1700K19

1700 1700A 1700B 1700C 1700D 1700F 1700K10 1700K12 1700K16 1700K19

Female Female Female Female Female Female Female Female Female Female

NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR

G 3/8"F R 1/2"M G 1/2"F G 3/4"F R 3/8"M R 3/4"M Hose 10 mm Hose 12 mm Hose 16 mm Hose 19 mm

5T17110 5T17210 5T17220 5T17410 5T17420 5T17008 5T17010 5T17012 5T17016 5T17019

17110 17210 17220 17410 17420 17008 17010 17012 17016 17019

Male Male Male Male Male Male Male Male Male Male

5T5026 5T2526

5026 2526

Safety plug Protection cover

Connectable with Cejn 410.

R 1/4"M R 3/8"M R 1/2"M G 3/8"F G 1/2"F Hose 8 mm Hose 10 mm Hose 12 mm Hose 16 mm Hose 19 mm

Part number

Tema descr.

Type

Connection

5T1750D 5T1750A 5T1750C

1750D 1750A 1750C

Female Female Female

R 1/4"M R 3/8"M R 1/2"M

5T1750B 5T1750 5T1750F

1750B 1750 1750F

Female Female Female

G 1/4"F G 3/8"F G 1/2"F

5T1750K08 5T1750K10 5T1750K12 5T1750K16 5T1750K19

1750K08 1750K10 1750K12 1750K16 1750K19

Female Female Female Female Female

5T175110 5T175210 5T175220

175110 175210 175220

Male Male Male

R 1/4"M R 3/8"M R 1/2"M

5T175410 5T175420 5T175430

175410 175420 175430

Male Male Male

G 1/4"F G 3/3"F G 1/2"F

5T175006 5T175010 5T175012 5T175016

175006 175010 175012 175016

Male Male Male Male

Hose 8 Hose 10 Hose 12 Hose 16 Hose 19

Hose 6 Hose 10 Hose 12 Hose 16

mm mm mm mm mm

mm mm mm mm

Connectable with Atlas Copco's QIC 15 fittings.

216

PRODUCT CATALOGUE 2009


Product group 520/523/524

Quick release fittings and Swivels Product Group 523

Product Group 523

TEMA 1800/1800E

TEMA 1800N

Compressed air fittings

Compressed air fittings

Bore: 10.4 mm PN = 3 MPa E = One-handed S = Safety nipple Part number Tema descr. Type

Seal

Connection

5T1800 5T1800EP 5T1800A 5T1800B 5T1800C

1800 1800EP 1800A 1800B 1800C

Female Female Female Female Female

NBR EPDM NBR NBR NBR

5T1800V 5T1800BV 5T1800AV 5T1800E 5T1800EA 5T1800EB

1800V 1800BV 1800AV 1800E 1800EA 1800EB

Female Female Female Female Female Female

5T1800EC 5T1800ED 5T1800EF

1800EC 1800ED 1800EF

Bore: 10.4 mm PN = 3 MPa E = One-handed S = Steel M = Brass Part number Tema descr. Type

Seal

G 3/8"F G 3/8"F G 1/2"M G 1/2"F G 3/4"F

5T1800N 5T1800NA 5T1800NB 5T1800NBA 5T1800NC

1800N 1800NA 1800NB 1800NBA 1800NC

Female Female Female Female Female

NBR NBR NBR EPDM NBR

G 3/8"F G 1/2"M G 1/2"F G 1/2"F G 3/4"F

Viton Viton Viton NBR NBR NBR

G 3/8"F G 1/2"F G 1/2"M G 3/8"F R 1/2"M G 1/2"F

5T1800NV 5T1800NAV 5T1800NBV 5T1800NCV

1800NV 1800NAV 1800NBV 1800NCV

Female Female Female Female

Viton Viton Viton Viton

G 3/8"F G 1/2"M G 1/2"F G 3/4"M

Female Female Female

NBR NBR NBR

G 3/4"F R 3/8"M R 3/4"M

5T18410MN 18410MN 5T18410STN 18410STN 5T18430MN 18430MN 5T18410MNV 18410MNV 5T18410STV 18410STV

Male Male Male Male Male

NBR NBR NBR Viton Viton

G G G G G

5T1800EK10 1800EK10 5T1800EK12 1800EK12 5T1800EK16 1800EK16 5T1800EK19 1800EK19

Female Female Female Female

NBR NBR NBR NBR

5T5026 5T2526 5T18310N 5T18310V

Safety plug Cover, male O-ring, NBR O-ring, Viton

5T18105 5T18110 5T18110A 5T18210 5T18220 5T18230

18105 18110 18110A 18210 18220 18230

Male Male Male Male Male Male

R G R G R R

5T18405 5T18410 5T18420

18405 18410 18420

Male Male Male

G 1/4"F G 3/8"F G 1/2"F

5T18006 5T18008 5T18010 5T18012 5T18016 5T18019

18006 18008 18010 18012 18016 18019

Male Male Male Male Male Male

5T18410S

18410S

Male

5T5026 5T2526

5026 2526

Safety plug Cover, male

5T18310N 5T18310V 5T18310EP

18310N 18310V 18310EP

Seal NBR Seal Viton Seal EPDM

5TN7100

N7-10.0

Seal NBR (one-handed)

Hose Hose Hose Hose

10 12 16 19

1/8"M 1/4"M 1/4"M 3/8"M 1/2"M 3/4"M

Hose 6 Hose 8 Hose 10 Hose 12 Hose 16 Hose 19

mm mm mm mm mm mm

G 3/8"F

NB! The 1800/1800E series is not connectable with the 1800N series.

PRODUCT CATALOGUE 2009

mm mm mm mm

5026 2526 18310N 18310V

Connection

3/8"F 3/8"F 3/4"F 3/8"F 3/8"F

NB! The 1800N series is not connectable with the 1800/1800E series.

5:20

Product Group 523

TEMA 1800H High pressure water

Bore: 10.4 mm PN = 3 MPa E = One-handed S = Steel M = Brass Part number Tema descr. Type

Seal

Connection

5T1800H 1800H 5T1800HEP 1800HEP 5T1800HV 1800HV

Female Female Female

NBR EPDM Viton

5T18105 5T18110 5T18110A 5T18210 5T18210A 5T18220 5T18230

18105 18110 18110A 18210 18210A 18220 18230

Male Male Male Male Male Male Male

R G R G R R R

5T18405 5T18410 5T18420

18405 18410 18420

Male Male Male

G 1/4"F G 3/8"F G 1/2"F

5T18310N 5T18310V 5T18310EP

18310N 18310V 18310EP

Seal, NBR Seal, Viton Seal, EPDM

G 3/8"F G 3/8"F G 3/8"F 1/8"M 1/4"M 1/4"M 3/8"M 3/8"M 1/2"M 3/4"M

217


Quick release fittings and Swivels Product Group 523

Product Group 524

TEMA 2100N

5C10 320

Compressed air fittings

Cejn series 320

PN = 2 MPa

Bore: 7.4mm PN = 3.5 MPa

Part number Tema descr. Type 5T2100 5T2119 5T2125 5T2132 5T21019 T21025 5T21032 5T21210 5T21310N

Product group 520/523/524

2100 2119 2125 2132 21019 21025 21032 21210 21310N

Connection

Female G 1" F G 1" F G 1" F Male Male Male Male O-ring Nitrile

Hose Hose Hose Hose Hose Hose

G 1"inv 19 mm 25 mm 32 mm 19 mm 25 mm 32 mm G 1"M

Product Group 523

TEMA Hose nipple Part number Tema descr. Type

Hose ID

Connection

5T1105

1105

Hose nipple 5 mm

G 1/8"M

5T1106

1106

Hose nipple

6 mm

G 1/8"M

5T1306

1306

Hose nipple

6 mm

G 1/4"M

5T1308

1308

Hose nipple

8 mm

G 1/4"M

5T1310

1310

Hose nipple 10 mm

G 1/4"M

5T1312

1312

Hose nipple 12 mm

G 1/4"M

5T1806

1806

Hose nipple

6 mm

G 3/8"M

5T1808

1808

Hose nipple

8 mm

G 3/8"M

5T1810

1810

Hose nipple 10 mm

G 3/8"M

5T1812

1812

Hose nipple 12 mm

G 3/8"M

5T1816

1816

Hose nipple 16 mm

G 3/8"M

5T1819

1819

Hose nipple 19 mm

G 3/8"M

Part number

Cejn descr.

Type

5C10 5C10 5C10 5C10

10 10 10 10

Female Female Female Female

320 320 320 320

1002 1003 1004 1005

320 320 320 320

1002 1003 1004 1005

Connection Hose 6 Hose 8 Hose 10 Hose 13

mm mm mm mm

5C10 320 1152 10 320 1152 Female 5C10 320 1154 10 320 1154 Female 5C10 320 1155 10 320 1155 Female

R 1/4"M R 3/8"M R 1/2"M

5C10 320 1202 10 320 1202 Female 5C10 320 1204 10 320 1204 Female 5C10 320 1205 10 320 1205 Female

G 1/4"F G 3/8"F G 1/2"F

5C10 5C10 5C10 5C10 5C10

320 320 320 320 320

5001 5002 5003 5004 5005

10 10 10 10 10

320 320 320 320 320

5001 5002 5003 5004 5005

Male Male Male Male Male

Hose 4 Hose 6 Hose 8 Hose 10 Hose 13

mm mm mm mm mm

5C10 5C10 5C10 5C10

320 320 320 320

5151 5152 5154 5155

10 10 10 10

320 320 320 320

5151 5152 5154 5155

Male Male Male Male

R R R R

1/8"M 1/4"M 3/8"M 1/2"M

5C10 5C10 5C10 5C10

320 320 320 320

5201 5202 5204 5205

10 10 10 10

320 320 320 320

5201 5202 5204 5205

Male Male Male Male

G G G G

1/8"F 1/4"F 3/8"F 1/2"F

5C10 5C10 5C10 5C10

320 320 320 320

8002 8003 8004 8005

10 10 10 10

320 320 320 320

8002 8003 8004 8005

Nipple cover Hose 1/4" Nipple cover Hose 5/16" Nipple cover Hose 3/8" Nipple cover Hose 1/2"

Product Group 523

Product Group 524

5552

5C10 320

Blow gun

Cejn series 320 Safety fitting

Connection = G 1/4" F Part number

Description

Part number

5552-00-20

Blow gun

5C10 320 3152 10 320 3152 Female 5C10 320 3154 10 320 3154 Female 5C10 320 3155 10 320 3155 Female

R 1/4"M R 3/8"M R 1/2"M

5C10 320 3202 10 320 3202 Female 5C10 320 3204 10 320 3204 Female 5C10 320 3205 10 320 3205 Female

G 1/4"F G 3/8"F G 1/2"F

Cejn descr.

Type

Connection

Product Group 523

5552 Spiral hose Polyurethane Part number

Dimension

Work length

Thread

5552-00-01 5552-00-02

6.5 x 10 mm 8.0 x 12 mm

4 m 6 m

1/4"M 3/8"M

218

5C10 5C10 5C10 5C10

320 320 320 320

3002 3003 3004 3005

10 10 10 10

320 320 320 320

3002 3003 3004 3005

Female Female Female Female

Hose 6 Hose 8 Hose 10 Hose 13

mm mm mm mm

PRODUCT CATALOGUE 2009


Product group 520/523/524

Quick release fittings and Swivels Product Group 524

5C10 410 Cejn series 410 Compressed air fittings Part number

Cejn descr.

Type

5C10 5C10 5C10 5C10 5C10

10 10 10 10 10

Female Female Female Female Female

410 410 410 410 410

1003 1004 1005 1006 1007

410 410 410 410 410

1003 1004 1005 1006 1007

Connection Hose 8 Hose 10 Hose 13 Hose 16 Hose 19

mm mm mm mm mm

5C10 410 1154 10 410 1154 Female 5C10 410 1155 10 410 1155 Female 5C10 410 1157 10 410 1157 Female

R 3/8"M R 1/2"M R 3/4"M

5C10 410 1204 10 410 1204 Female 5C10 410 1205 10 410 1205 Female 5C10 410 1207 10 410 1207 Female

G 3/8"F G 1/2"F G 3/4"F

5C10 5C10 5C10 5C10 5C10 5C10

410 410 410 410 410 410

5002 5003 5004 5005 5006 5007

10 10 10 10 10 10

410 410 410 410 410 410

5002 5003 5004 5005 5006 5007

Male Male Male Male Male Male

Hose 6 Hose 8 Hose 10 Hose 13 Hose 16 Hose 19

mm mm mm mm mm mm

5C10 5C10 5C10 5C10

410 410 410 410

5152 5154 5155 5157

10 10 10 10

410 410 410 410

5152 5154 5155 5157

Male Male Male Male

R R R R

1/4"M 3/8"M 1/2"M 3/4"M

5C10 5C10 5C10 5C10

410 410 410 410

5202 5204 5205 5207

10 10 10 10

410 410 410 410

5202 5204 5205 5207

Male Male Male Male

G G G G

1/4"F 3/8"F 1/2"F 3/4"F

5C10 5C10 5C10 5C10

410 410 410 410

8004 8005 8006 8007

10 10 10 10

410 410 410 410

8004 8005 8006 8007

Nipple cover

5:20

Hose3/8"

Nipple cover Hose 1/2" Nipple cover Hose 5/8" Nipple cover Hose 3/4"

Product Group 524

5C10 410 Cejn series 410 Safety fitting Part number

Cejn descr.

Type

Connection

5C10 410 3155 10 410 3155 Female 5C10 410 3157 10 410 3157 Female

R1/2"M R 3/4"M

5C10 410 3204 10 410 3204 Female 5C10 410 3205 10 410 3205 Female

R 3/8"F R 1/2"F

5C10 410 3005 10 410 3005 Female 5C10 410 3006 10 410 3006 Female 5C10 410 3007 10 410 3007 Female

Hose 13 mm Hose 16 mm Hose 19 mm

PRODUCT CATALOGUE 2009

219


Quick release fittings and Swivels

Product group 520/523/524

Product Group 523

Product Group 520

5555

5576-01

Tema swivel joint

swivel, Straight, G-threaded

Brass design. Axle made of hardened steel. PN = 25 MPa Part number 5T250 5T500 5T750 5T1000

Thread 1

Type

Thread 2

G 3/8" FS G 3/4" FS G 1" FS G 1 1/4" FS

Swivel 250 Swivel 500 Swivel 750 Swivel 1000

G 1/4" F G 1/2" F G 3/4" F G 1" F

Flow Rotation Rotation Part number Thread1 Thread2 l/m PN/MPa turns/min 5576-01-04

G 1/4"F

G 1/4"M

25

20.0

212

5576-01-06

G 3/8"F

G 3/8" M

35

20.0

173

5576-01-08

G 1/2" F

G 1/2" M

60

15.0

160

5576-01-12

G 3/4" F

G 3/4" M 100

15.0

120

5576-01-16

G 1" F

G 1" M 180

10.0

100

5576-01-20 G 1 1/4" F G 1 1/4" M 200

10.0

86

5576-01-24 G 1 1/2" F G 1 1/2" M 250

8.0

73

Product Group 520

Product Group 520

5590

5577-01

High pressure swivel, M – M

Swivel, Elbow 90°, G-threaded

Material: Steel/zinc-plated. Seal: Nitrile. Working temperature: -40°C – +110°C Part number

Thread 1

Type

Thread 2 PN/MPa

Flow Rotation Rotation Part number Thread1 Thread2 l/m PN/MPa turns/min

5590-08-08 5590-12-12

G 1/2" M G 3/4" M

Swivel Swivel

G 1/2" M G 3/4" M

5577-01-04

G 1/4" F

G 1/4"M

25

20.0

212

5577-01-06

G 3/8" F

G 3/8" M

35

20.0

173

5577-01-08

G 1/2" F

G 1/2" M

60

15.0

160

5577-01-12

G 3/4" F

G 3/4" M 100

15.0

120

5577-01-16

G 1" F

G 1" M 180

10.0

100

5577-01-20 G 1 1/4" F G 1 1/4" M 200

10.0

86

5577-01-24 G 1 1/2" F G 1 1/2" M 250

8.0

73

35.0 35.0

Product Group 520

5591 High pressure swivel, M – F

Material: Steel/zinc-plated. Seal: Nitrile. Working temperature: -40°C – +110°C Part number

Thread 1

5591-04-04 G 5591-06-06 G 5591-08-08 G 5591-12-12 G 5591-16-16 5591-20-20 G 1 5591-24-24 G 1

220

1/4"M 3/8"M 1/2"M 3/4"M G 1"M 1/4"M 1/2"M

Type

Thread 2 PN/MPa

Swivel Swivel Swivel Swivel Swivel Swivel Swivel

G G G G

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

F F F F F F F

40.0 36.5 35.0 35.0 35.0 32.0 30.0

PRODUCT CATALOGUE 2009


Product group 520/523/524

Quick release fittings and Swivels Product Group 520

Product Group 520

5TTA

5558-76

TEMA decompression valve

Back valve F/F

For assembling in hydraulic systems in order to remove static pressure. Dim. Tema

Thread1

3/8" 5TTA38 G 3/8" 1/2" 5TTA50 G 1/2" 3/4" 5TTA75 G 3/4" 1" 5TTA100 G 1"

M M M M

Part number. Description Female 5551-18-06 5558-69-08 5558-68-25 5558-69-55

Type TA TA TA TA

Opening pressure 0.35 Bar

Thread2 PN MPa

38 G 50 G 75 G 100

3/8" 1/2" 3/4" G 1"

F F F F

28.0 25.0 20.0 15.0

Dim.

Part number

5558-76-04 5558-76-06 5558-76-08 5558-76-12 5558-76-16

1/4" 3/8" 1/2" 3/4" 1"

Thread G G G G

1/4" 3/8" 1/2" 3/4" G 1"

F F F F F

PN MPa 40.0 35.0 30.0 25.0 25.0

Product Group 520

Product Group 520

5558-68

5558-77

Faster VF Burst valve

Back valve M/M

According to ISO 5676.

Opening pressure 0.35 Bar

PN MPa

Flow

G 3/8" F 22.0 40 l/m G 1/2" F 22.0 40 l/m M18 x 1.5 (12L) M Bulkhead 22.0 40 l/m Protection for female part (included)

Dim.

Part number

Thread

PN MPa

1/4" 3/8" 1/2"

5558-77-04 5558-77-06 5558-77-08

G 1/4" M G 3/8" M G 1/2" M

40.0 35.0 30.0

Male 5558-68-08 G 1/2" M 22.0 40 l/m 5558-68-51 M18 x 1.5 (12L) M Bulkhead 22.0 40 l/m 5558-60-55 Protection for male part (green)

For more back valves, see chapter 6.

Product Group 520

PN = 35 MPa Material: Steel/zinc plated Seal: Nitrile Dimension Flow 10

G 1/4" Part numer

G 3/8" Part number

5554 Hose brake valve

G 1/2" Part number

G 3/4" Part number

5554-10-04

15

5554-15-06

25

5554-25-06

30 35

5554-30-08 5554-35-06

40

5554-40-06

50

5554-50-08

60

5554-60-08

5554-60-12

80

5554-80-12

100

5554-90-12

120

5554-91-12

Other dimensions on request.

PRODUCT CATALOGUE 2009

221

5:20


New life to your old hose! Bring your old and used hydraul hose to Hydroscand and we will make sure that it will get a new life. We start by removing any remaining oil. The oil is then cleaned and reused. The fitting is cut off and sent to metal recycling. The hose it self is also taken care of and recycled into new raw material for energy.

Contact your nearest HYDROSCAND representative for more information.


HYDROSCAND Pipe clamps

Table of contents

Pipe clapms Product group 570

Standard series page

5302 5322 5303 5323 5390-0 5390-6 5390-2 5390-09 5390-5 5393-5 5391-0 5391-1 5391-2 5391-3 5393 5391-7 5392-0 5392-3 5392-2

Complete clamp Polypropylene 224 Complete clamp Aluminium 224 Complete clamp Polypropylene 225 Complete clamp Aluminium 225 Clamps Polypropylene 226 Clamps Polyamide, self-extingushing 226 Clamps Aluminium 227 Clamps for twin hose 227 Clamps Vibration absorber for rubber grommet 227 Rubber grommet for 5390-5 227 Normal weld plate 228 Weld plate Long 228 Double weld plate 228 Inline weld plate 228 Wear rail with accessories 229 Sectional plate 229 Cap head bolt for washer 229 Hexagon bolt for sectional plate 229 Stacking bolt 229

Heavy series page

Low weight series

5315 5335 5316 5336 5390-1 5390-3 5355 5391-8 5391-4 5392-6 5393-0 5391-5 5391-5 5392-4

Complete clamp Polypropylene Complete clamp Aluminium Complete clamp Polypropylene Complete clamp Aluminium Clamps Polypropylene Clamps Aluminium U-clamps Simple sectional plate Simple weld plate Stacking bolt Tube washer for stacking bolt Double sectional plate Double weld plate Hexagon bolt

Used for all types of installations and pipe diameter of 4–22 mm, male. Clamp material: Polypropylene.

Low weight series page

5342 5343 5390-4 5390-4C 5394-0 5392-5 5392-5 5393-0 5394-1

Complete double clamp 234 Complete double clamp 234 Double clamp Polypropylene 234 Double clamp Polypropylene, self-extingushing 234 Weld plate 235 Bolt for washer 235 Bolt for sectional plate 235 Washer 235 Sectional plate 235

Double series page

5360 5360

Clamp Polypropylene Clamp Polypropylene

Hydroscand’s pipe clamps are designed as attaching elements for pipes and hoses. Using a Hydroscand clamp when assembling pipes and pipe groups, as well as industrial and hydraulic hoses, and general pipe installations, makes the assembling quick and efficient. Hydroscand’s pipe clamps are made of polypropylene, aluminium, glass fibre reinforced polyamide (flame proofed) and polypropylene with rubber grommet. Weld and sectional plates, screws etc. are available in steel or in stainless steel. For systems with a lot of vibration, the recommended material is polypropylene with rubber grommet. This is also suitable for attaching electrical cables.

HYDROSCAND delivery programme Standard series Used for normal hydraulic and pipe diameter of 6–54 mm, male. Clamp material: Polypropylene, aluminium, glass fibre reinforced polyamide and polypropylene with rubber grommet. Note! Clamps for inch-pipes are also available.

Heavy series Used for high pressure hydraulics and pipe diameter of 8–324 mm, male. Clamp material: Polypropylene, aluminium, glass fibre reinforced polyamide and polypropylene with rubber grommet.

Double clamps Used for normal hydraulics and pipe diameter of 6–42 mm, male. Clamp material: Polypropylene and glass fibre reinforced polyamide.

Weld and sectional plates Are available in untreated design. Price and delivery on request. For recommended distance between pipe clamps, see chapter 11.

230 230 231 231 232 232 232 233 233 233 233 233 233 233

235 235

Material characteristics

Polypropylene

Aluminium

Polyamide

Mechanical characteristics Tear proof

DIN 53455

35N/mm2

170-200 N/mm2

160 N/mm2

Bending strength

DIN 53452

43 N/mm

70 N/mm

230 N/mm2

Impact strength

DIN 53453

11 KJ/m

40 KJ/m2

Compression strength

ASTM D695

12.000 N/mm2

HB 500-600 N/mm2

160 N/mm2

-30° – +90°C

to +400°C

-40° – +180°C

2

2

2

Technical characteristics Temperature area Electrical characteristics Specific resistance

DIN 53482

1018 Ohm x cm

1015 Ohm x cm

Creeping current resistance

DIN 53480

KA3C–KB>660–KC>600

KA3B–KB450–KC450

We reserve the right to make constructional changes. Hydroscand reserves the right to modify any or all parts of this catalogue without any prior notice.

PRODUCT CATALOGUE 2009

223

5:70


Hydroscand Pipe clamps

Part number

Descr.

5302-01-06 5302-01-08 5302-01-10 5302-01-12 5302-02-06 5302-02-08 5302-02-10 5302-02-12 5302-03-14 5302-03-15 5302-03-16 5302-03-18 5302-04-20 5302-04-22 5302-04-23 5302-04-25 5302-05-28 5302-05-30 5302-05-32 5302-06-35 5302-06-38 5302-06-40 5302-06-42 5302-06-45 5302-07-45 5302-07-48 5302-07-50 5302-07-54

SPP SPP SPP SPP SPP SPP SPP SPP SPP SPP SPP SPP SPP SPP SPP SPP SPP SPP SPP SPP SPP SPP SPP SPP SPP SPP SPP SPP

Product group 570 5302

5322

Complete clamp Polypropylene

Complete clamp Aluminium

Standard series

Standard series

Group No. bolts 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 6 6 6 6 6 7 7 7 7

1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Pipe Ø

6 8 10 12 6 8 10 12 14 15 16 18 20 22 23 25 28 30 32 35 38 40 42 45 45 48 50 54

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Part number

Descr.

5322-02-06 5322-02-08 5322-02-10 5322-02-12 5322-03-14 5322-03-15 5322-03-16 5322-03-18 5322-04-20 5322-04-22 5322-04-23 5322-04-25 5322-05-28 5322-05-30 5322-05-32 5322-06-35 5322-06-38 5322-06-40 5322-06-42 5322-06-45

SPA SPA SPA SPA SPA SPA SPA SPA SPA SPA SPA SPA SPA SPA SPA SPA SPA SPA SPA SPA

Group No. bolts 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 6 6 6 6 6

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Pipe Ø

6 8 10 12 14 15 16 18 20 22 23 25 28 30 32 35 38 40 42 45

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

The complete standard clamp series consisting of clamp halves (ALK), welding plate (SP), socket head cap screw (IS) and washer.

The complete standard clamp series consisting of clamp halves (PLK), welding plate (SP), socket head cap screw (IS) and washer.

224

PRODUCT CATALOGUE 2009


Product group 570

Part number

Descr.

5303-01-06 5303-01-08 5303-01-10 5303-01-12 5303-02-06 5303-02-08 5303-02-10 5303-02-12 5303-03-14 5303-03-15 5303-03-16 5303-03-18 5303-04-20 5303-04-22 5303-04-23 5303-04-25 5303-05-28 5303-05-30 5303-05-32 5303-06-35 5303-06-38 5303-06-40 5303-06-42 5303-06-45 5303-07-45 5303-07-48 5303-07-50 5303-07-54

SPP-TP SPP-TP SPP-TP SPP-TP SPP-TP SPP-TP SPP-TP SPP-TP SPP-TP SPP-TP SPP-TP SPP-TP SPP-TP SPP-TP SPP-TP SPP-TP SPP-TP SPP-TP SPP-TP SPP-TP SPP-TP SPP-TP SPP-TP SPP-TP SPP-TP SPP-TP SPP-TP SPP-TP

Hydroscand Pipe clamps 5303

5323

Complete clamp Polypropylene

Complete clamp Aluminium

Standard series

Standard series

Group No. bolts 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 6 6 6 6 6 7 7 7 7

1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Pipe Ø

6 8 10 12 6 8 10 12 14 15 16 18 20 22 23 25 28 30 32 35 38 40 42 45 45 48 50 54

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Part number 5323-02-06 5323-02-08 5323-02-10 5323-02-12 5323-03-14 5323-03-15 5323-03-16 5323-03-18 5323-04-20 5323-04-22 5323-04-23 5323-04-25 5323-05-28 5323-05-30 5323-05-32 5323-06-35 5323-06-38 5323-06-40 5323-06-42 5323-06-45

Descr. SPA-TP SPA-TP SPA-TP SPA-TP SPA-TP SPA-TP SPA-TP SPA-TP SPA-TP SPA-TP SPA-TP SPA-TP SPA-TP SPA-TP SPA-TP SPA-TP SPA-TP SPA-TP SPA-TP SPA-TP

Group No. bolts 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 6 6 6 6 6

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Pipe Ø 6 8 10 12 14 15 16 18 20 22 23 25 28 30 32 35 38 40 42 45

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Den complete standard clamp series consisting of clamp halves (ALK), welding plate (SP), sectional plate (TP) and hexagon bolt.

5:70

The complete standard clamp series consisting of clamp halves (PLK), welding plate (SP), sectional plate (TP) and hexagon bolt.

PRODUCT CATALOGUE 2009

225


Hydroscand Pipe clamps

Product group 570 5390-0

5390-6

Clamps Polypropylene

Clamps Polyamide, self-extingushing

Standard series Part number

Descr.

5390-01-06 5390-01-08 5390-01-10 5390-01-12 5390-02-06 5390-02-08 5390-02-10 5390-02-12 5390-03-006 5390-03-14 5390-03-15 5390-03-16 5390-03-18 5390-04-008 5390-04-19 5390-04-20 5390-04-22 5390-04-23 5390-04-25 5390-05-012 5390-05-28 5390-05-30 5390-05-32 5390-06-016 5390-06-32 5390-06-35 5390-06-38 5390-06-40 5390-06-42 5390-06-45 5390-07-45 5390-07-48 5390-07-50 5390-07-54

PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK

226

Group No. bolts 1 1 1 1 2 2 2 2 3 3 3 3 3 4 4 4 4 4 4 5 5 5 5 6 6 6 6 6 6 6 7 7 7 7

1 1 1 1 2 2 2 2 2 (3/8") 2 2 2 2 2 (1/2") 2 2 2 2 2 2 (3/4") 2 2 2 2 (1") 2 2 2 2 2 2 2 2 2 2

Pipe Ø 6.0 8.0 10.0 12.0 6.0 8.0 10.0 12.0 17.2 14.0 15.0 16.0 18.0 21.3 19.0 20.0 22.0 23.0 25.0 26.9 28.0 30.0 32.0 33.7 32.0 35.0 38.0 40.0 42.0 45.0 45.0 48.0 50.0 54.0

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Standard series

Part number

Descr.

5390-61-06 5390-61-08 5390-61-10 5390-61-12 5390-62-06 5390-62-08 5390-62-10 5390-62-12 5390-63-14 5390-63-15 5390-63-16 5390-63-18 5390-64-20 5390-64-22 5390-64-23 5390-64-25 5390-65-28 5390-65-30 5390-65-32 5390-66-32 5390-66-35 5390-66-38 5390-66-40 5390-66-42 5390-67-45 5390-67-48 5390-67-50 5390-67-54

PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK PLK

Group No. bolts 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 6 6 6 6 6 7 7 7 7

1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Pipe Ø

6 8 10 12 6 8 10 12 14 15 16 18 20 22 23 25 28 30 32 32 35 38 40 42 45 48 50 54

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

PRODUCT CATALOGUE 2009


Product group 570

Hydroscand Pipe clamps 5390-2

5390-5

Clamps Aluminium

Clamps Vibration absorber for rubber grommet

Standard series Part number

Descr. Group No. bolts

5390-22-004 5390-22-06 5390-22-08 5390-22-10 5390-22-12 5390-23-14 5390-23-15 5390-23-16 5390-23-18 5390-24-008 5390-24-20 5390-24-22 5390-24-23 5390-24-25 5390-25-012 5390-25-28 5390-25-30 5390-25-32 5390-26-016 5390-26-35 5390-26-38 5390-26-40 5390-26-42 5390-26-45 5390-27-48

ALK ALK ALK ALK ALK ALK ALK ALK ALK ALK ALK ALK ALK ALK ALK ALK ALK ALK ALK ALK ALK ALK ALK ALK ALK

2 2 2 2 2 3 3 3 3 4 4 4 4 4 5 5 5 5 6 6 6 6 6 6 7

Pipe Ø

2 (1/4") 6.4 2 6.0 2 8.0 2 10.0 2 12.0 2 14.0 2 15.0 2 16.0 2 18.0 2 (1/2") 21.3 2 20.0 2 22.0 2 23.0 2 25.0 2 (3/4") 26.9 2 28.0 2 30.0 2 32.0 2 (1") 33.7 2 35.0 2 38.0 2 40.0 2 (1 1/4") 42.4 2 45.0 2 (1 1/2") 48.3

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

5390-09 Clamps for twin hose Standard series Part number

Descr.

Group

5390-09-12 5390-09-14 5390-09-16 5390-09-20

PLTVK PLTVK PLTVK PLTVK

4 5 5 6

PRODUCT CATALOGUE 2009

Hose OD 12 14 16 20

Standard series

Part number

Descr.

5390-54-00 5390-56-00 5390-57-00

PGLK PGLK PGLK

Group 4 6 7

5393-5 Rubber grommet for 5390-5 Standard series Part number

Descr.

5393-54-06 5393-54-08 5393-54-10 5393-54-12 5393-54-15 5393-54-16 5393-54-18 5393-56-08 5393-56-10 5393-56-12 5393-56-15 5393-56-16 5393-56-18 5393-56-20 5393-56-22 5393-56-25 5393-56-28 5393-57-28 5393-57-30 5393-57-35 5393-57-38 5393-57-42 5393-57-50

Grommet Grommet Grommet Grommet Grommet Grommet Grommet Grommet Grommet Grommet Grommet Grommet Grommet Grommet Grommet Grommet Grommet Grommet Grommet Grommet Grommet Grommet Grommet

Group 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 7 7 7 7 7 (1 1/4") 7 (1 1/2")

Pipe Ø 6.00 8.00 10.00 12.00 15.00 16.00 18.00 8.00 10.00 12.00 15.00 16.00 18.00 20.00 22.00 25.00 28.00 28.00 30.00 35.00 38.00 42.40 48.25

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

mm mm mm mm

227

5:70


Hydroscand Pipe clamps

Part number

Descr.

5391-01-01 5391-02-01 5391-03-01 5391-04-01 5391-05-01 5391-06-01 5391-07-01 5391-08-01

SP SP SP SP SP SP SP SP

Product group 570

5391-0

5391-2

Normal weld plate

Double weld plate

Standard series

Standard series

Group 1 2 3 4 5 6 7 8

Part number

Descr.

5391-22-02 5391-23-02 5391-24-02 5391-25-02 5391-26-02

SPD SPD SPD SPD SPD

Group 2 3 4 5 6

5391-1

5391-3

Weld plate Long

Inline weld plate Standard series

Standard series Part number

Descr.

5391-11-01 5391-12-01 5391-13-01 5391-14-01 5391-15-01 5391-16-01 5391-17-01

SP SP SP SP SP SP SP

228

Long Long Long Long Long Long Long

Group 1 2 3 4 5 6 7

Part number

Descr.

5391-31-10 5391-32-10 5391-33-10 5391-34-10 5391-35-05 5391-36-05

RSP RSP RSP RSP RSP RSP

Group

No. clamps

1 2 3 4 5 6

10 10 10 10 5 5

PRODUCT CATALOGUE 2009


Product group 570

Hydroscand Pipe clamps 5393

5392-0

Wear rail with accessories

Cap head bolt for washer

Standard series

Standard series

Part number

Description

Part number

Descr.

5393-00-05 5393-00-02 5393-00-03 5393-10-05 5393-10-03 5393-10-08 5393-10-10 5393-10-12

Wear rail, 2 meter 14x28 mm Mounting nut M6 O-ring for FM Wear rail for, 2 meter 40x22 mm O-ring for FM T Mounting nut M8 Mounting nut M10 Mounting nut M12

5392-01-22 5392-03-28 5392-04-30 5392-05-40 5392-06-50 5392-07-60 5393-00-01

IS IS IS IS IS IS Washer

Thread M6 M6 M6 M6 M6 M6 M6

22 28 30 40 50 60

Standard series

5391-71-01 5391-72-01 5391-73-01 5391-74-01 5391-75-01 5391-76-01 5391-77-01 5391-78-01

TP TP TP TP TP TP TP TP

Group 1 2 3 4 5 6 7 8

1&2 3 4 5 6 7

Hexagon bolt for sectional plate

Sectional plate

Descr.

Group

5392-3

5391-7

Part number

Length

Standard series Part number

Descr.

5392-31-30 5392-33-35 5392-34-40 5392-35-50 5392-36-60 5392-37-70 5392-38-10

SKB SKB SKB SKB SKB SKB SKB

Thread M6 M6 M6 M6 M6 M6 M6

Length 30 35 40 50 60 70 100

Group 1&2 3 4 5 6 7 8

5392-2 Stacking bolt Standard series

PRODUCT CATALOGUE 2009

Part number

Descr.

Thread

5392-21-22 5392-23-28 5392-24-30 5392-25-40 5392-26-50 5393-00-04

PBS M6 PBS M6 PBS M6 PBS M6 PBS M6 Tab washer

Length 22 28 30 40 50

Group 1&2 3 4 5 6

229

5:70


Hydroscand Pipe clamps

Product group 570 5315

5335

Complete clamp Polypropylene

Complete clamp Aluminium

Heavy series

Heavy series

Part number

Descr.

Group

5315-01-08 5315-01-10 5315-01-12 5315-01-14 5315-01-15 5315-01-16 5315-01-18 5315-01-20 5315-02-22 5315-02-25 5315-02-28 5315-02-30 5315-03-30 5315-03-32 5315-03-33 5315-03-35 5315-03-36 5315-03-38 5315-03-40 5315-03-42 5315-03-45 5315-04-38 5315-04-40 5315-04-42 5315-04-45 5315-04-48 5315-04-50 5315-04-53 5315-04-56 5315-04-60 5315-04-63 5315-04-65 5315-04-70 5315-05-73 5315-05-80 5315-05-90

TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP TSPP

1 1 1 1 1 1 1 1 2 2 2 2 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5

Pipe Ø 8 10 12 14 15 16 18 20 22 25 28 30 30 32 33 35 36 38 40 42 45 38 40 42 45 48 50 53 56 60 63 65 70 73 80 90

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Part number

Descr.

Group

5335-01-06 5335-01-08 5335-01-10 5335-01-12 5335-01-15 5335-01-16 5335-01-18 5335-01-20 5335-02-20 5335-02-22 5335-02-25 5335-02-28 5335-02-30 5335-03-32 5335-03-33 5335-03-35 5335-03-36 5335-03-38 5335-03-42 5335-03-45 5335-04-42 5335-04-48 5335-04-50 5335-04-56 5335-04-60 5335-04-63 5335-04-70 5335-05-65 5335-05-76 5335-05-90

TSPA TSPA TSPA TSPA TSPA TSPA TSPA TSPA TSPA TSPA TSPA TSPA TSPA TSPA TSPA TSPA TSPA TSPA TSPA TSPA TSPA TSPA TSPA TSPA TSPA TSPA TSPA TSPA TSPA TSPA

1 1 1 1 1 1 1 1 2 2 2 2 2 3 3 3 3 3 3 3 4 4 4 4 4 4 4 5 5 5

Pipe Ø 6 8 10 12 15 16 18 20 20 22 25 28 30 32 33 35 36 38 42 45 42 48 50 56 60 63 70 65 76 90

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Complete clamp consisting of 1 pair of clamp halves (TALK), single welding plate (TSP), single sectional plate (TTP) and bolts (SKB).

Complete clamp consisting of 1 pair of clamp halves (TPLK), single welding plate (TSP), single sectional plate (TTP) and bolts (SKB).

230

PRODUCT CATALOGUE 2009


Product group 570

Hydroscand Pipe clamps 5316

5336

Complete clamp Polypropylene

Complete clamp Aluminium

Heavy series

Heavy series

Part number

Descr.

Group

5316-01-08 5316-01-10 5316-01-12 5316-01-14 5316-01-15 5316-01-16 5316-01-18 5316-01-20 5316-02-22 5316-02-25 5316-02-28 5316-02-30 5316-03-32 5316-03-33 5316-03-35 5316-03-36 5316-03-38 5316-03-40 5316-03-42 5316-03-45 5316-04-38 5316-04-40 5316-04-42 5316-04-45 5316-04-48 5316-04-50 5316-04-53 5316-04-56 5316-04-60 5316-04-63 5316-04-65 5316-04-70 5316-05-73 5316-05-80 5316-05-90

TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP TSPDP

1 1 1 1 1 1 1 1 2 2 2 2 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5

Pipe Ø 8 10 12 14 15 16 18 20 22 25 28 30 32 33 35 36 38 40 42 45 38 40 42 45 48 50 53 56 60 63 65 70 73 80 90

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Part number

Descr.

5336-01-06 5336-01-08 5336-01-10 5336-01-12 5336-01-15 5336-01-16 5336-01-18 5336-01-20 5336-02-20 5336-02-22 5336-02-25 5336-02-28 5336-02-30 5336-03-32 5336-03-33 5336-03-35 5336-03-36 5336-03-38 5336-03-42 5336-03-45 5336-04-42 5336-04-48 5336-04-50 5336-04-56 5336-04-60 5336-04-63 5336-04-70 5336-05-65 5336-05-76 5336-05-90

TSPDA TSPDA TSPDA TSPDA TSPDA TSPDA TSPDA TSPDA TSPDA TSPDA TSPDA TSPDA TSPDA TSPDA TSPDA TSPDA TSPDA TSPDA TSPDA TSPDA TSPDA TSPDA TSPDA TSPDA TSPDA TSPDA TSPDA TSPDA TSPDA TSPDA

Group 1 1 1 1 1 1 1 1 2 2 2 2 2 3 3 3 3 3 3 3 4 4 4 4 4 4 4 5 5 5

Pipe Ø 6 8 10 12 15 16 18 20 20 22 25 28 30 32 33 35 36 38 42 45 42 48 50 56 60 63 70 65 76 90

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Complete clamp consisting of 2 pairs of clamp halves (TALK ), double welding plate (TSPD), double sectional plate (TTPD) and 4 pcs of bolts (SKB).

Complete clamp consisting of 2 pairs of clamp halves (TPLK ), double welding plate (TSPD), double sectional plate (TTPD) and 4 pcs of bolts (SKB).

PRODUCT CATALOGUE 2009

231

5:70


Hydroscand Pipe clamps

Part number

Descr.

5390-11-08 5390-11-10 5390-11-12 5390-11-14 5390-11-15 5390-11-16 5390-11-18 5390-11-20 5390-12-20 5390-12-22 5390-12-25 5390-12-28 5390-12-30 5390-13-30 5390-13-32 5390-13-33 5390-13-35 5390-13-36 5390-13-38 5390-13-40 5390-13-42 5390-13-45 5390-14-38 5390-14-40 5390-14-42 5390-14-45 5390-14-48 5390-14-49 5390-14-50 5390-14-53 5390-14-54 5390-14-56 5390-14-57 5390-14-60 5390-14-63 5390-14-65 5390-14-70 5390-15-73 5390-15-76 5390-15-80 5390-15-88 5390-15-90

TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK TPLK

232

Group 1 1 1 1 1 1 1 1 2 2 2 2 2 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5

Product group 570 5390-1

5390-3

Clamps Polypropylene

Clamps Aluminium

Heavy series

Heavy series

Pipe Ø 8.0 10.0 12.0 14.0 15.0 16.0 18.0 20.0 20.0 22.0 25.0 28.0 30.0 30.0 32.0 (1") 33.7 35.0 36.0 38.0 40.0 (1 1/4") 42.4 45.0 38.0 40.0 42.0 45.0 48.0 (1 1/2") 48. 3 50.0 53.0 (1 3/4") 54.0 56.0 57.2 (2") 60.0 63.0 65.0 70.0 73.0 (2 1/2") 76.0 80.0 (3") 88.9 90.0

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Part number

Descr.

5390-31-06 5390-31-08 5390-31-10 5390-31-12 5390-31-15 5390-31-16 5390-31-18 5390-31-20 5390-32-20 5390-32-22 5390-32-25 5390-32-28 5390-32-30 5390-33-32 5390-33-33 5390-33-35 5390-33-36 5390-33-38 5390-33-40 5390-33-42 5390-33-45 5390-34-48 5390-34-50 5390-34-56 5390-34-60 5390-34-63 5390-34-70 5390-35-65 5390-35-76 5390-35-90

TALK TALK TALK TALK TALK TALK TALK TALK TALK TALK TALK TALK TALK TALK TALK TALK TALK TALK TALK TALK TALK TALK TALK TALK TALK TALK TALK TALK TALK TALK

Group 1 1 1 1 1 1 1 1 2 2 2 2 2 3 3 3 3 3 3 3 3 4 4 4 4 4 4 5 5 5

Pipe Ø

(1")

(1 1/4") (1 1/2")

(2")

(2 1/2")

6,0 8,0 10,0 12,0 15,0 16,0 18,0 20,0 20,0 22,0 25,0 28,0 30,0 32,0 33,7 35,0 36,0 38,0 40,0 42,4 45,0 48,3 50,0 56,0 60,3 63,0 70,0 65,0 76,0 90,0

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

5355 U-clamps CM – Medium heavy series CP – Heavy series Part number

Descr.

Pipe Ø

Thread

5355-08-08 5355-08-12 5355-08-16 5355-10-08 5355-10-12 5355-10-16 5355-12-24 5355-12-32 5355-12-40 5355-12-48 5355-16-64 5355-16-96

CM CM CM CP CP CP CP CP CP CP CP CP

1/2" 3/4" 1" 1/2" 3/4" 1" 1 1/2" 2" 2 1/2" 3" 4" 6"

M8 M8 M8 M 10 M 10 M 10 M 12 M 12 M 12 M 12 M 16 M 16

PRODUCT CATALOGUE 2009


Product group 570

Part number

Descr.

5391-41-01 5391-42-01 5391-43-01 5391-44-01 5391-45-01 5391-46-01 5391-47-01

TSP TSP TSP TSP TSP TSP TSP

Part number

Descr.

5391-81-01 5391-82-01 5391-83-01 5391-84-01 5391-85-01 5391-86-01 5391-87-01

TTP TTP TTP TTP TTP TTP TTP

Hydroscand Pipe clamps

5391-4

5391-5

Simple weld plate

Double weld plate

Heavy series

Heavy series

Group 1 2 3 4 5 6 7

Part number

Descr.

5391-51-20 5391-52-20 5391-53-20 5391-54-20 5391-55-20

TSPD TSPD TSPD TSPD TSPD

Group 1 2 3 4 5

5391-8

5391-5

Simple sectional plate

Double sectional plate

Heavy series

Heavy series

Group 1 2 3 4 5 6 7

Part number

Descr.

Thread

5392-61-49 5392-62-60 5392-63-75 5392-64-11 5392-65-13

PBS PBS PBS PBS PBS

M M M M M

10 10 10 12 16

Part number

Descr.

5391-91-20 5391-92-20 5391-93-20 5391-94-20 5391-95-20

TTPD TTPD TTPD TTPD TTPD

Group 1 2 3 4 5

5392-6

5392-4

Stacking bolt

Hexagon bolt

Heavy series

Heavy series

Length 49 65 75 108 139

mm mm mm mm mm

Group 1 2 3 4 5

Part number

Descr.

Thread

5392-41-45 5392-42-60 5392-43-75 5392-44-11 5392-45-13 5392-46-19 5392-47-22

SKB SKB SKB SKB SKB SKB SKB

M M M M M M M

10 10 10 12 16 20 20

Length 45 60 75 100 130 190 220

mm mm mm mm mm mm mm

Group 1 2 3 4 5 6 7

5393-0 Tube washer for stacking bolt Heavy series Part number

Descr.

5393-00-11 5393-00-12 5393-00-13 5393-00-14 5393-00-15

SB-CP SB-CP SB-CP SB-CP SB-CP

PRODUCT CATALOGUE 2009

Group 1 2 3 4 5

233

5:70


Hydroscand Pipe clamps

Product group 570 5390-4

5342

Double clamp Polypropylene

Complete double clamp Double series Part number

Descr.

5342-01-06 5342-01-08 5342-01-10 5342-01-12 5342-02-14 5342-02-15 5342-02-16 5342-02-18 5342-03-20 5342-03-22 5342-03-25 5342-04-26 5342-04-28 5342-04-30 5342-05-35 5342-05-38 5342-05-42

DB DB DB DB DB DB DB DB DB DB DB DB DB DB DB DB DB

Group 1 1 1 1 2 2 2 2 3 3 3 4 4 4 5 5 5

Pipe Ø 6 8 10 12 14 15 16 18 20 22 25 26 28 30 35 38 42

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Complete double clamp consisting of clamp halves (DPLK), welding plate (DSP), washer (DB) and bolt (SKB).

Double series Part number

Descr.

5390-41-06 5390-41-08 5390-41-10 5390-41-12 5390-42-14 5390-42-15 5390-42-16 5390-42-18 5390-43-20 5390-43-22 5390-43-23 5390-43-25 5390-44-26 5390-44-28 5390-44-30 5390-45-33 5390-45-35 5390-45-38 5390-45-40 5390-45-42

DPLK DPLK DPLK DPLK DPLK DPLK DPLK DPLK DPLK DPLK DPLK DPLK DPLK DPLK DPLK DPLK DPLK DPLK DPLK DPLK

Double series

5343-01-06 5343-01-08 5343-01-10 5343-01-12 5343-02-14 5343-02-15 5343-02-16 5343-02-18 5343-03-20 5343-03-22 5343-03-25 5343-04-26 5343-04-28 5343-04-30 5343-05-35 5343-05-38 5343-05-42

DSP DSP DSP DSP DSP DSP DSP DSP DSP DSP DSP DSP DSP DSP DSP DSP DSP

Group 1 1 1 1 2 2 2 2 3 3 3 4 4 4 5 5 5

Pipe Ø 6 8 10 12 14 15 16 18 20 22 25 26 28 30 35 38 42

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

6 8 10 12 14 15 16 18 20 22 23 25 26 28 30 33 35 38 40 42

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Double clamp Polypropylene, self-extingushing

Complete double clamp

Descr.

1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 5 5 5 5 5

Pipe Ø

5390-4C

5343

Part number

Group

Double series Part number

Descr.

Group

5390-41-06C 5390-41-08C 5390-41-10C 5390-41-12C 5390-42-14C 5390-42-16C 5390-42-18C 5390-43-20C 5390-43-22C 5390-43-23C 5390-44-26C 5390-44-28C 5390-44-30C 5390-45-33C 5390-45-35C 5390-45-38C 5390-45-40C 5390-45-42C

DPLK DPLK DPLK DPLK DPLK DPLK DPLK DPLK DPLK DPLK DPLK DPLK DPLK DPLK DPLK DPLK DPLK DPLK

1 1 1 1 2 2 2 3 3 3 4 4 4 5 5 5 5 5

Pipe Ø 6 8 10 12 14 16 18 20 22 23 26 28 30 33 35 38 40 42

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Complete double clamp consisting of clamp halves (DPLK), welding plate (DSP), sectional plate (DTP) and bolt (SKB).

234

PRODUCT CATALOGUE 2009


Product group 570

Part number

Descr.

5394-01-01 5394-02-01 5394-03-01 5394-04-01 5394-05-01

DSP DSP DSP DSP DSP

Hydroscand Pipe clamps

5394-0

5394-1

Weld plate

Sectional plate

Double series

Double series

Group

2 2 2 2 2

1 2 3 4 5

Part number

Descr.

5394-11-01 5394-12-01 5394-13-01 5394-14-01 5394-15-01

DTP DTP DTP DTP DTP

2 2 2 2 2

Clamp Polypropylene

Bolt for washer

Part number

Descr.

5392-51-25 5392-52-30 5392-53-40 5392-53-45 5392-55-55

SKB SKB SKB SKB SKB

Thread M M M M M

6 8 8 8 8

Length 25 30 40 45 55

mm mm mm mm mm

Group 1 2 3 4 5

Light series

Ø 6.8 mm

Part number

Descr.

5360-00-04 5360-00-06 5360-00-08 5360-00-10 5360-00-12 5360-00-15 5360-00-18 5360-00-22

LKE LKE LKE LKE LKE LKE LKE LKE

5392-5

5392-33-35 5392-52-35 5392-53-45 5392-54-50 5392-55-60

SKB SKB SKB SKB SKB

M M M M M

Length

6 8 8 8 8

35 35 45 50 60

Group 1 2 3 4 5

5393-0

mm mm mm mm mm mm mm mm

Light series

Ø 6.8 mm

Thread

4 6 8 10 12 15 18 22

Clamp Polypropylene

Double series Descr.

Pipe Ø

5360

Bolt for sectional plate

Part number

1 2 3 4 5

5360

5392-5 Double series

Group

Part number

Descr.

5360-04-04 5360-06-06 5360-06-08 5360-08-08 5360-10-10 5360-12-12 5360-12-15 5360-15-15 5360-18-18 5360-22-22

LKD LKD LKD LKD LKD LKD LKD LKD LKD LKD

Pipe Ø 4 6 6 8 10 12 12 15 18 22

mm mm mm mm mm mm mm mm mm mm

Washer Double series Part number

Descr.

5393-00-06 5393-00-08

DB 2 DB 2

PRODUCT CATALOGUE 2009

Thread M6 M8

Group 1 2-5

235

5:70


THE SKYâ&#x20AC;&#x2122;S THE LIMIT

You now have the possibility to get your pipes in almost any shape you wish. Through our unique patented technology for hydroforming, we blow up the pipes in a three-dimensional tool and have almost total design freedom. The technique have been used in larger scale in the car manufacturing industries for some time, but it has been too expensive for smaller industries. Not anymore. With our patent it is now available for everyone. Just use your imagination.


HYDROSCAND Cutting ring fittings Cutting ring fittings

Table of contents

Product group 600 Hydroscand's cutting ring fittings are used for tubing, mainly in hydraulic and pneumatic applications. Hydroscand can also offer a stainless steel cutting ring fitting designed for aggressive media and surroundings. Working pressure/PN up to 63 MPa/630 Bar, for male pipes of 4–42 mm diameter. Pressure ratings according to ISO 8434-1. Cutting ring fittings are characterised by a very rigid tube assembling, resistance to vibrations and pressure impulses. The fittings can be dismantled/reassembled more than once. When assembling the cutting ring fitting, the ring's two edges are pressed into the pipe, which gives a mechanical bearing. The first edge has already started the penetration before the second edge starts cutting into the pipe. After the assembling, part three of the cutting ring is pushed in between the cone and the pipe, to make sure no vibrations are transported to the cutting edges. The fourth part secures radial movement. The design of the ring profile gives a very strong, axial and radial bearing. The tension is carried by the whole cutting ring length.

Materials Hydroscand's cutting ring fittings are manufactured of automatic steel or of forged materials. The standard surface treatment is E-coated. E-coated is the name of the surface treatment Hydroscand use for its fittings. It is Cr6 free and therefore more environmentally friendly and better for human health. Temperatures up to +200°C. Sealing with standard NBR maximum +90°C.

Connections

Cutting ring fittings page

6177 6171 6172 6173 6175 6174 6182 6181 6184 6183 6176 6178 6187 6188 6189 6186 6002 6185 6179 6180 6003 6003 S 6003 6006 6006 6007 6008 6009 6009 6010 6010 6011 6013 6014

GE – NPT LL Straight fitting – NPT M GE – R/C LL Straight fitting – R M GE – MK/C LL Straight fitting – MK M WE – R/C LL Elbow fitting – R M WE – NPT LL 90° Elbow fitting – NPT M WE – MK/C LL 90° Elbow fitting – MK M TE – R/C LL T-Fitting – R M TE – MK/C LL T-Fitting – MK M LE – R/C LL L-Fitting – R M LE – MK/C LL L-Fitting – MK M G LL Straight joint fitting W LL Elbow joint fitting T LL T-Joint fitting C LL Cross joint fitting RED LL Reduction – fitting WHO – G LL Banjo – G M GE – GA Straight fitting – G M SWVE – M LL Banjo – M M D LL Cutting ring M LL Nut GE – GB Straight fitting – G M GE – GB 60° Straight fitting – G M GE – GB Body Straight body, male G-thread GE – MB Straight fitting – M M GE – MB Body Straight body, male M-thread GE – NPT Straight fitting – NPT M GE – UNF Straight fitting – UNF M GE – G/ED Straight fitting – G M GE – G/ED Straight body with male G-thread GE – M/ED Straight fitting – M M GE – M/ED Straight body with male M-thread WE – R/C 90° elbow fitting – R M WE – GB 90° elbow fitting – G M WE – MKC 90° elbow fitting – MK M

241 241 241 241 241 241 241 241 242 242 242 242 242 242 242 242 243 243 243 243 243 244 244 245 245 245 246 246 247 247 247 248 248 248

6

Withworth pipe thread G, cone pipe threads R, NPTF cone, UNF, metric. Cutting ring cone according to ISO 8434-1. When different connection dimensions are possible, the standard dimension is noted in bold text.

Certifications Hydroscand can deliver fittings with the following standards/certificates: DVGW, Norske Veritas, Germanischer Lloyd, ISO 9002.

4 3 2 1

Please note that all cutting ring fittings are also available without nut and cutting ring.

Hydroscand reserves the right to modify any or all parts of this catalogue without any prior notice.

PRODUCT CATALOGUE 2009

The table of contents continues on the next page.

237


Table of contents

Cutting ring fittings page

6016 WE – MB 90° elbow fitting – M M 6017 WE – NPT 90° elbow fitting NPT VEE – G M Adjustable elbow 45° 6018 6021 TE – R/C T-fitting – R M 6023 TE – GB T-fitting – G M LE – R/C L-fitting – R M 6031 6033 LE – R/C L-fitting – G M LE – MK/C L-fitting – MK M 6033 6036 LE – MB L-fitting – M M 6035 DKLO Straight joint fitting DKLO–DKSO Straight joint fitting 6235 6041 G Straight joint fitting W Elbow joint fitting 6042 6043 T T-Joint fitting 6044 K Cross joint fitting SV Bulkhead connection 6045 6046 WSV Elbow bulkhead connection AS Straight welding boss 6047 6048 ESV Welding bulkhead connection 6049 WAS Elbow welding fitting 6050 EVW Adjustable elbow fitting 6051 EVWO Adjustable elbow fitting 6060 EVT Adjustable T-fitting 6061 EVTO Adjustable T-fitting 6070 EVL Adjustable L-fitting 6071 EVL Adjustable L-fitting 6083 EVGE–GB Straight standpipe 6089 EVGE–ED Straight standpipe 6092 EVGEO – M/ED Straight standpipe 6090 EVGEO – G/ED Straight standpipe 6101 GAI – G Straight fitting – G F 6102 GAI – M Straight fitting – M F 6103 MAV – G Manometer – fitting 6104 MAV – EV – G Manometer 6105 RED Reduction – fitting 6107 KOR – L Reduction 6109 KORO – L Straight reduction 6607 KOR – S Reduction 6609 KORO – S Straight reduction 6110 WHB – G Banjo – G M 6111 WHB – M Banjo – M M 6118 WHO – G Banjo – G M 6119 WHO – M Banjo – M M 6112 DSVW – G Banjo – G M 6114 DSVT – G Banjo T – G M 6116 WHBT – G Banjo T – G M 6128 SWVE – G Banjo T – G M 6110-00/03 Seal Ring 6120 RHD Non-return valve 6121 RHV – G – ED Non-return valve 6123 RHZ – G – ED Non-return valve 6126 RHR Non-return valve 6127 RHDI Non-return valve 6131 Adaptor kit 6130 PL Plug 6149-01 D Cutting ring 6150 M Nut 6152-03 D – ED B4 Cutting ring and soft seal 6151 FM Pre-installation dies 6153 GM Locking nut 6160-50 O-ring 6160 SN Welding nipple with O-ring

238

248 249 249 249 249 250 250 250 250 250 250 251 251 251 251 252 252 252 252 253 253 253 253 254 254 254 255 255 256 256 256 256 257 257 257 258 258 259 259 260 260 260 260 261 261 261 261 262 262 262 262 263 263 263 263 264 264 264 264 266 266 266

PRODUCT CATALOGUE 2009


Product group 600

HYDROSCAND Cutting ring fittings

Pressure ratings for cutting ring fittings. for pipe fittings Ă&#x2DC; male LL 4 6001 6007 6010 6014 6021 6034 6041 6044 6047 6050 6061 6087 6092 6105 6130 6217 6537 6088 6110 6118 6083 6103 6018 6002 6128 6023 6112 6118 6120

6003 6008 6011 6016 6024 6035 6042 6045 6048 6051 6070 6089 6101 6107 6185 6218 6172 6111 6119 6086 6104

6006 6009 6013 6017 6027 6036 6043 6046 6049 6060 6071 6090 6102 6109 6216 6219

5

6

100

100 6116

6

L 8 10 12 15 18 22 28 35 42 6

315

400

100 6123

315 315 315 250 250 250 400 250

S 8 10 12 14 16 20 25 30 38

160

315

400

100 6033 6114 6119 6121

8

315

630

250

630

250

160

315 160

160 100 160 160 100 250 100

315

630* 630 315

315

400

400

250 250

400

315 250

400 250

630 250 400** 400 400

250 200

400

315

160 250

160 400 315 250** 250 250

*=safety factor 3 **=safety factor min 1,6

Thread sizes for cutting ring fittings Pipe size

Thread

4 LL

M 8 x 1.0

4 LL

M 10 x 1.0

6 LL

M 10 x 1.0

8 LL

M 12 x 1.0

6L

M 12 x 1.5

8L

M 14 x 1.5

10 L

M 16 x 1.5

12 L

M 18 x 1.5

15 L

M 22 x 1.5

18 L

M 26 x 1.5

22 L

M 30 x 2.0

28 L

M 36 x 2.0

35 L

M 45 x 2.0

42 L

M 52 x 2.0

6S

M 14 x 1.5

8S

M 16 x 1.5

10 S

M 18 x 1.5

12 S

M 20 x 1.5

14 S

M 22 x 1.5

16 S

M 24 x 1.5

20 S

M 30 x 2.0

25 S

M 36 x 2.0

30 S

M 42 x 2.0

38 S

M 52 x 2.0

PRODUCT CATALOGUE 2009

6

239


HYDROSCAND Cutting ring fittings

Product group 600

Assembly instructions

240

1.

Cut the tube at a 90 degree angle (do not use roller, type tube cutters), remove all internal and external burrs.

2.

Oil the 24°cone, the thread of the fitting body, the cutting ring and the nut.

a. For carbon steel fittings, use mineral oil.

b. For stainless steel fittings, use a special highperformance lubricant.

3.

Fit the nut and the cutting ring on the tubes as shown. The larger diameter of the cutting ring must face the nut.

4.

Insert the tube on the 24°cone until it comes into contact with the stop. Tighten the nut by hand until the cutting ring rest firmly on the nut. Then tighten the nut with a wrench until the cutting edge of the ring is in contact with the tube and prevents rotation if this.

5.

Holding the tube against its stop and making sure it does not rotate, tighten the nut by ¾ of a turn. This way, the cutting ring cut into the outer part of the tube for the necessary depth and raises an edge in front of its cutting edge while the second cutting edge clinches the tube at the same time.

6.

Loosen the nut and check that there is a clearly raised edge all round the tube. The edge must cover 80% of the front of the cutting ring. This check is peremptory for the safety of all concerned!! If the raised edge is not satisfactory, pre-assembly must be repeated. The cutting ring can rotate on the tube.

7.

Reassemble the nut on the fitting until a certain resistance is encountered and then tighten for a further 1/4 turn.

A.

Final installation of works pre-installed fittings: Screw the nut by hand as hard as you can, then the nut should be tightened approximately 1/2–3/4 turn more. This information apply to all our pre-installed fittings.

B.

All the pre-assembly of stainless steel fittings must be performed with a pre-assembly tool (blocks or machines).

PRODUCT CATALOGUE 2009


Product group 600

Part number

Type

6171-04-02 6171-05-02 6171-06-02 6171-08-02 6171-08-04 6171-10-04 6171-12-04

GE 4 LL GE 5 LL GE 6 LL GE 8 LL GE 8 LL GE 10 LL GE 12 LL

Part number

Type

6172-04-06 6172-04-08 6172-05-08 6172-06-06 6172-06-08 6172-06-10 6172-08-10

GE 4 LL GE 4 LL GE 5 LL GE 6 LL GE 6 LL GE 6 LL GE 8 LL

HYDROSCAND Cutting ring fittings 6171

6174

GE – R/C LL Straight fitting – R M

WE – MK/C LL 90° Elbow fitting – MK M

Cone sealing. C DIN 3852

Cone sealing. C DIN 3852

Pipe size

Thread

Part number

Type

4 mm 5 mm 6 mm 8 mm 8 mm 10 mm 12 mm

R 1/8" R 1/8" R 1/8" R 1/8" R 1/4" R 1/4" R 1/4"

6174-04-06 6174-04-08 6174-05-08 6174-06-06 6174-06-08 6174-06-10 6174-08-10

WE 4 LL WE 4 LL WE 5 LL WE 6 LL WE 6 LL WE 6 LL WE 8 LL

Pipe size

Thread

4 mm 4 mm 5 mm 6 mm 6 mm 6 mm 8 mm

M6x1k M8x1k M8x1k M6x1k M8x1k M 10 x 1 k M 10 x 1 k

6172

6175

GE – MK/C LL Straight fitting – MK M

WE – NPT LL 90° Elbow fitting – NPT M

Cone sealing. C DIN 3852

Cone sealing. ANSI/ASME B1.20.1-1983

Pipe size

Thread

Part number

Type

4 mm 4 mm 5 mm 6 mm 6 mm 6 mm 8 mm

M6x1k M8x1k M8x1k M6x1k M8x1k M 10 x 1 k M 10 x 1 k

6175-04-02 6175-05-02 6175-06-02 6175-08-02

WE WE WE WE

4 5 6 8

Pipe size LL LL LL LL

4 5 6 8

mm mm mm mm

Thread 1/8"-27 1/8"-27 1/8"-27 1/8"-27

NPT NPT NPT NPT

6177

6182

GE – NPT LL Straight fitting – NPT M

TE – R/C LL T-Fitting – R M

Cone sealing. ANSI/ASME B1.20.1-1983

Cone sealing. C DIN 3852

Part number

Type

6177-04-02 6177-05-02 6177-06-02 6177-08-02

GE GE GE GE

4 5 6 8

Pipe size LL LL LL LL

Part number

Type

6173-04-02 6173-05-02 6173-06-02 6173-08-02 6173-10-04 6173-12-04

WE WE WE WE WE WE

4 LL 5 LL 6 LL 8 LL 10 LL 12 LL

4 5 6 8

mm mm mm mm

Thread 1/8"-27 1/8"-27 1/8"-27 1/8"-27

NPT NPT NPT NPT

Part number 6182-04-02 6182-05-02 6182-06-02 6182-08-02

Type TE TE TE TE

4 5 6 8

Pipe size LL LL LL LL

4 5 6 8

mm mm mm mm

Thread R R R R

1/8" 1/8" 1/8" 1/8"

6173

6181

WE – R/C LL Elbow fitting – R M

TE – MK/C LL T-Fitting – MK M

Cone sealing. C DIN 3852

Cone sealing. C DIN 3852

Pipe size 4 5 6 8 10 12

mm mm mm mm mm mm

Thread

Part number

Type

R R R R R R

6181-04-08 6181-05-08 6181-06-10 6181-08-10

TE TE TE TE

1/8" 1/8" 1/8" 1/8" 1/4" 1/4"

4 5 6 8

LL LL LL LL

Pipe size 4 5 6 8

mm mm mm mm

Thread M8 M8 M10 M10

x x x x

1 1 1 1

k k k k

When different connection dimensions are possible, the standard dimension is noted in bold text.

PRODUCT CATALOGUE 2009

241

6


HYDROSCAND Cutting ring fittings

Product group 600

6184

6187

LE – R/C LL L-Fitting – R M

T LL T-Joint fitting

Cone sealing. C DIN 3852 Part number

Type

6184-04-02 6184-05-02 6184-06-02 6184-08-02

LE LE LE LE

4 5 6 8

LL LL LL LL

Pipe size 4 5 6 8

mm mm mm mm

Thread

Part number

Type

R R R R

6187-04-04 6187-05-05 6187-06-06 6187-08-08 6187-10-10 6187-12-12

T T T T T T

1/8" 1/8" 1/8" 1/8"

Pipe size

4 LL 5 LL 6 LL 8 LL 10 LL 12 LL

4 5 6 8 10 12

6183

6188

LE – MK/C LL L-Fitting – MK M

C LL Cross joint fitting

Cone sealing. C DIN 3852 Part number

Type

6183-04-08 6183-05-08 6183-06-10 6183-08-10

LE LE LE LE

4 5 6 8

LL LL LL LL

Part number

Type

6176-04-04 6176-05-05 6176-06-06 6176-08-08 6176-10-10 6176-12-12

G G G G G G

4 LL 5 LL 6 LL 8 LL 10 LL 12 LL

Part number

Type

6178-04-04 6178-05-05 6178-06-06 6178-08-08 6178-10-10 6178-12-12

W W W W W W

242

4 LL 5 LL 6 LL 8 LL 10 LL 12 LL

Pipe size 4 5 6 8

mm mm mm mm

Thread M8 M8 M10 M10

x x x x

1 1 1 1

k k k k

mm mm mm mm mm mm

Part number

Type

Pipe size

6188-04-04 6188-06-06 6188-08-08

C 4 LL C 6 LL C 8 LL

4 mm 6 mm 8 mm

6176

6189

G LL Straight joint fitting

RED LL Reduction – fitting

Pipe size 4 5 6 8 10 12

mm mm mm mm mm mm

Part number

Type

Pipe size

6189-06-04 6189-08-04 6189-08-06

RED 6 / 4 LL RED 8 / 4 LL RED 8 / 6 LL

6 - 4 mm 8 - 4 mm 8 - 6 mm

6178

6186

W LL Elbow joint fitting

WHO – G LL Banjo – G M

Pipe size 4 5 6 8 10 12

mm mm mm mm mm mm

Part number

Type

6186-04-02 6186-05-02 6186-06-02 6186-08-02

WHO WHO WHO WHO

Pipe size 4 5 6 8

LL LL LL LL

4 5 6 8

mm mm mm mm

Thread G G G G

1/8" 1/8" 1/8" 1/8"

PRODUCT CATALOGUE 2009


Product group 600

HYDROSCAND Cutting ring fittings 6003

6185

GE – GB Straight fitting – G M

SWVE – M LL Banjo – M M Part number 6185-04-08 6185-05-08 6185-06-10 6185-08-10

Type SWVE SWVE SWVE SWVE

Pipe size 4 5 6 8

LL LL LL LL

4 6 6 8

mm mm mm mm

Thread M8 M8 M 10 M 10

x x x x

1.0 1.0 1.0 1.0

6179 D LL Cutting ring Part number

Type

6179-00-04 6179-00-05 6179-00-06 6179-00-08 6179-00-12

D D D D D

Pipe size

4 LL 5 LL 6 LL 8 LL 12 LL

4 5 6 8 12

mm mm mm mm mm

6180 M LL Nut Part number

Type

6180-00-04 6180-00-05 6180-00-06 6180-00-08 6180-00-12

M M M M M

4 LL 5 LL 6 LL 8 LL 12 LL

Pipe size 4 5 6 8 12

mm mm mm mm mm

Thread M8 M 10 M 10 M 12 M 16

x x x x x

1.0 1.0 1.0 1.0 1.0

6002 GE – GA Straight fitting – G M Bonded seal. A DIN 3852-2 Part number

Type

Pipe size

Thread

6002-06-02 6002-10-04 6002-12-04 6002-12-06 6002-12-08 6002-15-06

GE 6 L GE 10 L GE 12 L GE 12 L GE 12 L GE 15 L

6 mm 10 mm 12 mm 12 mm 12 mm 15 mm

G 1/8" G 1/4" G 1/4" G 3/8" G 1/2" G 3/8"

6502-06-02 6502-06-04 6502-08-04 6502-10-06 6502-12-06 6502-16-08 6502-20-12 6502-25-16 6502-30-20

GE 6 S GE 6 S GE 8 S GE 10 S GE 12 S GE 16 S GE 20 S GE 25 S GE 30 S

6 mm 6 mm 8 mm 10 mm 12 mm 16 mm 20 mm 25 mm 30 mm

G 1/8" G 1/4" G 1/4" G 3/8" G 3/8" G 1/2" G 3/4" G 1" G 1 1/4"

PRODUCT CATALOGUE 2009

Cutting edge. ISO 1179-4 Part number

Type

Pipe size

Thread

6003-06-02 6003-06-04 6003-06-06 6003-08-02 6003-08-04 6003-08-06 6003-08-08 6003-10-02 6003-10-04 6003-10-06 6003-10-08 6003-12-04 6003-12-06 6003-12-08 6003-15-06 6003-15-08 6003-15-12 6003-18-08 6003-18-12 6003-22-08 6003-22-12 6003-22-16 6003-28-12 6003-28-16 6003-35-16 6003-35-20 6003-42-24

GE 6 L GE 6 L GE 6 L GE 8 L GE 8 L GE 8 L GE 8 L GE 10 L GE 10 L GE 10 L GE 10 L GE 12 L GE 12 L GE 12 L GE 15 L GE 15 L GE 15 L GE 18 L GE 18 L GE 22 L GE 22 L GE 22 L GE 28 L GE 28 L GE 35 L GE 35 L GE 42 L

6 mm 6 mm 6 mm 8 mm 8 mm 8 mm 8 mm 10 mm 10 mm 10 mm 10 mm 12 mm 12 mm 12 mm 15 mm 15 mm 15 mm 18 mm 18 mm 22 mm 22 mm 22 mm 28 mm 28 mm 35 mm 35 mm 42 mm

G 1/8" G 1/4" G 3/8" G 1/8" G 1/4" G 3/8" G 1/2" G 1/8" G 1/4" G 3/8" G 1/2" G 1/4" G 3/8" G 1/2" G 3/8" G 1/2" G 3/4" G 1/2" G 3/4" G 1/2" G 3/4" G 1" G 3/4" G 1" G 1" G 1 1/4" G 1 1/2"

6503-06-04 6503-08-04 6503-08-06 6503-10-04 6503-10-06 6503-12-04 6503-12-06 6503-12-08 6503-14-06 6503-14-08 6503-16-06 6503-16-08 6503-16-12 6503-20-08 6503-20-12 6503-20-16 6503-25-12 6503-25-16 6503-30-12 6503-30-16 6503-30-20 6503-38-20 6503-38-24

GE 6 S GE 8 S GE 8 S GE 10 S GE 10 S GE 12 S GE 12 S GE 12 S GE 14 S GE 14 S GE 16 S GE 16 S GE 16 S GE 20 S GE 20 S GE 20 S GE 25 S GE 25 S GE 30 S GE 30 S GE 30 S GE 38 S GE 38 S

6 mm 8 mm 8 mm 10 mm 10 mm 12 mm 12 mm 12 mm 14 mm 14 mm 16 mm 16 mm 16 mm 20 mm 20 mm 20 mm 25 mm 25 mm 30 mm 30 mm 30 mm 38 mm 38 mm

G 1/4" G 1/4" G 3/8" G 1/4" G 3/8" G 1/4" G 3/8" G 1/2" G 3/8" G 1/2" G 3/8" G 1/2" G 3/4" G 1/2" G 3/4" G 1" G 3/4" G 1" G 3/4" G 1" G 1 1/4" G 1 1/4" G 1 1/2"

When different connection dimensions are possible, the standard dimension is noted in bold text.

243

6


HYDROSCAND Cutting ring fittings

Part number

Type

6003-06-02S 6003-08-04S 6003-10-04S 6003-10-06S 6003-10-08S 6003-12-04S 6003-12-06S 6003-12-08S 6003-15-06S 6003-15-08S 6003-18-08S 6003-22-12S 6003-28-16S 6003-35-20S 6003-42-24S 6503-08-04S 6503-10-06S 6503-12-06S 6503-16-08S 6503-20-08S 6503-20-12S 6503-25-12S 6503-25-16S 6503-30-12S 6503-30-16S 6503-30-20S 6503-38-24S

Product group 600

6003 S

6003

GE – GB 60° Straight fitting – G M

GE – GB Body Straight body with male G-thread

Cutting edge. ISO 1179-4

Cutting edge. ISO 1179-4

Pipe size

Thread

GE 6 L GE 8 L GE 10 L GE 10 L GE 10 L GE 12 L GE 12 L GE 12 L GE 15 L GE 15 L GE 18 L GE 22 L GE 28 L GE 35 L GE 42 L

6 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm 12 mm 15 mm 15 mm 18 mm 22 mm 28 mm 35 mm 42 mm

G 1/8" G 1/4" G 1/4" G 3/8" G 1/2" G 1/4" G 3/8" G 1/2" G 3/8" G 1/2" G 1/2" G 3/4" G 1" G 1 1/4" G 1 1/2"

GE 8 S GE 10 S GE 12 S GE 16 S GE 20 S GE 20 S GE 25 S GE 25 S GE 30 S GE 30 S GE 30 S GE 38 S

8 mm 10 mm 12 mm 16 mm 20 mm 20 mm 25 mm 25 mm 30 mm 30 mm 30 mm 38 mm

G 1/4" G 3/8" G 3/8" G 1/2" G 1/2" G 3/4" G 3/4" G 1" G 3/4" G 1" G 1 1/4" G 1 1/2"

Part number

Type

Pipe size

Thread

6003-06-03 6003-08-03 6003-08-05 6003-08-07 6003-10-05 6003-10-07 6003-10-09 6003-12-05 6003-12-07 6003-12-09 6003-15-07 6003-15-09 6003-15-13 6003-18-09 6003-18-13 6003-22-09 6003-22-13 6003-28-17 6003-35-17 6003-35-21 6003-42-25

GE 6 L Body GE 8 L Body GE 8 L Body GE 8 L Body GE 10 L Body GE 10 L Body GE 10 L Body GE 12 L Body GE 12 L Body GE 12 L Body GE 15 L Body GE 15 L Body GE 15 L Body GE 18 L Body GE 18 L Body GE 22 L Body GE 22 L Body GE 28 L Body GE 35 L Body GE 35 L Body GE 42 L Body

6 mm G 1/8" 8 mm G 1/8" 8 mm G 1/4" 8 mm G 3/8" 10 mm G 1/4" 10 mm G 3/8" 10 mm G 1/2" 12 mm G 1/4" 12 mm G 3/8" 12 mm G 1/2" 15 mm G 3/8" 15 mm G 1/2" 15 mm G 3/4" 18 mm G 1/2" 18 mm G 3/4" 22 mm G 1/2" 22 mm G 3/4" 28 mm G 1" 35 mm G 1" 35 mm G 1 1/4" 42 mm G 1 1/2"

6503-06-05 6503-08-05 6503-10-07 6503-12-07 6503-12-09 6503-14-09 6503-16-09 6503-16-13 6503-20-09 6503-20-13 6503-25-17 6503-30-21 6503-38-21

GE 6 S Body GE 8 S Body GE 10 S Body GE 12 S Body GE 12 S Body GE 14 S Body GE 16 S Body GE 16 S Body GE 20 S Body GE 20 S Body GE 25 S Body GE 30 S Body GE 38 S Body

6 mm 8 mm 10 mm 12 mm 12 mm 14 mm 16 mm 16 mm 20 mm 20 mm 25 mm 30 mm 38 mm

G 1/4" G 1/4" G 3/8" G 3/8" G 1/2" G 1/2" G 1/2" G 3/4" G 1/2" G 3/4" G 1" G 1 1/4" G 1 1/4"

When different connection dimensions are possible, the standard dimension is noted in bold text.

244

PRODUCT CATALOGUE 2009


Product group 600

Part number

Type

6006-06-10 6006-08-12 6006-08-14 6006-08-22 6006-10-14 6006-10-16 6006-10-22 6006-12-14 6006-12-16 6006-12-18 6006-15-16 6006-15-18 6006-18-22 6006-22-22 6006-22-26 6006-28-33 6006-42-48

GE 6 L GE 8 L GE 8 L GE 8 L GE 10 L GE 10 L GE 10 L GE 12 L GE 12 L GE 12 L GE 15 L GE 15 L GE 18 L GE 22 L GE 22 L GE 28 L GE 42 L

6506-06-12 6506-08-14 6506-10-16 6506-12-18 6506-14-20 6506-16-22 6506-20-27 6506-25-33 6506-30-42 6506-38-48

GE GE GE GE GE GE GE GE GE GE

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

HYDROSCAND Cutting ring fittings 6006

6007

GE – MB Straight fitting – M M

GE – NPT Straight fitting – NPT M

Cutting edge. ISO 1179-4

Cone sealing. ANSI/ASME B1.20.1-1983

Pipe size 6 mm 8 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm 12 mm 15 mm 15 mm 18 mm 22 mm 22 mm 28 mm 42 mm 6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

Thread M 10 x 1.0 M 12 x 1.5 M 14 x 1.5 M 22 x 1.5 M 14 x 1.5 M 16 x 1.5 M 22 x 1.5 M 14 x 1.5 M 16 x 1.5 M 18 x 1.5 M 16 x 1.5 M 18 x 1.5 M 22 x 1.5 M 22 x 1.5 M 26 x 1.5 M 33 x 2.0 M 48 x 2.0 M M M M M M M M M M

12 14 16 18 20 22 27 33 42 48

x x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

Part number

Type

Pipe size

Thread

6007-06-02 6007-06-04 6007-08-02 6007-08-04 6007-10-04 6007-12-04 6007-12-06 6007-12-08 6007-15-08 6007-18-08 6007-22-12 6007-28-16 6007-35-20 6007-42-24

GE 6 L GE 6 L GE 8 L GE 8 L GE 10 L GE 12 L GE 12 L GE 12 L GE 15 L GE 18 L GE 22 L GE 28 L GE 35 L GE 42 L

6 mm 6 mm 8 mm 8 mm 10 mm 12 mm 12 mm 12 mm 15 mm 18 mm 22 mm 28 mm 35 mm 42 mm

1/8"-27 NPT 1/4"-18 NPT 1/8"-27 NPT 1/4"-18 NPT 1/4"-18 NPT 1/4"-18 NPT 3/8"-18 NPT 1/2"-14 NPT 1/2"-14 NPT 1/2"-14 NPT 3/4"-14 NPT 1"-11½ NPT 1 1/4"-11½ NPT 1 1/2"-11½ NPT

6507-06-04 6507-08-04 6507-10-04 6507-10-06 6507-12-04 6507-12-06 6507-14-08 6507-16-08 6507-20-12 6507-25-16 6507-30-20 6507-38-24

GE 6 S 6 mm GE 8 S 8 mm GE 10 S 10 mm GE 10 S 10 mm GE 12 S 12 mm GE 12 S 12 mm GE 14 S 14 mm GE 16 S 16 mm GE 20 S 20 mm GE 25 S 25 mm GE 30 S 30 mm GE 38 S 38 mm

1/4"-18 NPT 1/4"-18 NPT 1/4"-18 NPT 3/8"-18 NPT 1/4"-18 NPT 3/8"-18 NPT 1/2"-14 NPT 1/2"-14 NPT 3/4"-14 NPT 1"-11½ NPT 1 1/4"-11½ NPT 1 1/2"-11½ NPT

6

6006 GE – MB Body Straight body with male M-thread Cutting edge. ISO 1179-4 Part number

Type

6006-06-11 6006-08-13 6006-10-15 6006-10-23 6006-12-17 6006-12-19 6006-15-23 6006-18-23 6006-22-27

GE 6 L Body GE 8 L Body GE 10 L Body GE 10 L Body GE 12 L Body GE 12 L Body GE 15 L Body GE 18 L Body GE 22 L Body

6506-12-19 6506-16-23 6506-30-43

GE 12 S Body GE 16 S Body GE 30 S Body

PRODUCT CATALOGUE 2009

Pipe size

Thread

6 mm M 10 x 1.0 8 mm M 12 x 1.5 10 mm M 14 x 1.5 10 mm M 22 x 1.5 12 mm M 16 x 1.5 12 mm M 18 x 1.5 15 mm M 22 x 1.5 18 mm M 22 x 1.5 22 mm M 26 x 1.5 12 mm 16 mm 30 mm

M 18 x 1.5 M 22 x 1.5 M 42 x 2.0

245


HYDROSCAND Cutting ring fittings

Product group 600

6008

6009

GE – UNF Straight fitting – UNF M

GE – G/ED Straight fitting – G M

O-ring sealing. UN-UNF SAE J514

ED sealing

Part number

Type

Pipe size

Thread

6008-06-07 6008-08-07 6008-08-08 6008-10-07 6008-10-09 6008-12-09 6008-12-12 6008-12-14 6008-15-12 6008-15-14 6008-18-12 6008-18-14 6008-22-14 6008-22-17 6008-22-21 6008-28-17 6008-28-21 6008-35-21 6008-35-26 6008-42-26

GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE

6 L 8 L 8 L 10 L 10 L 12 L 12 L 12 L 15 L 15 L 18 L 18 L 22 L 22 L 22 L 28 L 28 L 35 L 35 L 42 L

6 8 8 10 10 12 12 12 15 15 18 18 22 22 22 28 28 35 35 42

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

7/16"-20 UNF 7/16"-20 UNF 1/2"-20 UNF 7/16"-20 UNF 9/16"-18 UNF 9/16"-18 UNF 3/4"-16 UNF 7/8"-14 UNF 3/4"-16 UNF 7/8"-14 UNF 3/4"-16 UNF 7/8"-14 UNF 7/8"-14 UNF 1 1/16"-12 UN 1 5/16"-12 UN 1 1/16"-12 UN 1 5/16"-12 UN 1 5/16"-12 UN 1 5/8"-12 UN 1 5/8"-12 UN

6508-08-07 6508-08-08 6508-10-09 6508-12-09 6508-12-12 6508-16-12 6508-16-14 6508-20-12 6508-20-14 6508-20-17 6508-25-17 6508-25-21 6508-30-21 6508-30-26 6508-38-26 6508-38-30

GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE

8 S 8 S 10 S 12 S 12 S 16 S 16 S 20 S 20 S 20 S 25 S 25 S 30 S 30 S 38 S 38 S

8 8 10 12 12 16 16 20 20 20 25 25 30 30 38 38

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

7/16"-20 UNF 1/2"-20 UNF 9/16"-18 UNF 9/16"-18 UNF 3/4"-16 UNF 3/4"-16 UNF 7/8"-14 UNF 3/4"-16 UNF 7/8"-14 UNF 1 1/16"-12 UN 1 1/16"-12 UN 1 5/16"-12 UN 1 5/16"-12 UN 1 5/8"-12 UN 1 5/8"-12 UN 1 7/8"-12 UN

Part number

Type

Pipe size

Thread

6009-06-02 6009-06-04 6009-08-04 6009-08-06 6009-10-04 6009-10-06 6009-10-08 6009-12-04 6009-12-06 6009-12-08 6009-15-06 6009-15-08 6009-15-12 6009-18-06 6009-18-08 6009-18-12 6009-22-12 6009-22-16 6009-28-16 6009-28-20 6009-35-16 6009-35-20 6009-42-20 6009-42-24

GE 6 L GE 6 L GE 8 L GE 8 L GE 10 L GE 10 L GE 10 L GE 12 L GE 12 L GE 12 L GE 15 L GE 15 L GE 15 L GE 18 L GE 18 L GE 18 L GE 22 L GE 22 L GE 28 L GE 28 L GE 35 L GE 35 L GE 42 L GE 42 L

6 mm 6 mm 8 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm 12 mm 15 mm 15 mm 15 mm 18 mm 18 mm 18 mm 22 mm 22 mm 28 mm 28 mm 35 mm 35 mm 42 mm 42 mm

G 1/8" G 1/4" G 1/4" G 3/8" G 1/4" G 3/8" G 1/2" G 1/4" G 3/8" G 1/2" G 3/8" G 1/2" G 3/4" G 3/8" G 1/2" G 3/4" G 3/4" G 1" G 1" G 1 1/4" G 1" G 1 1/4" G 1 1/4" G 1 1/2"

6509-06-04 6509-08-04 6509-08-06 6509-10-04 6509-10-06 6509-12-04 6509-12-06 6509-14-08 6509-16-06 6509-16-08 6509-16-12 6509-20-08 6509-20-12 6509-20-16 6509-25-12 6509-25-16 6509-30-16 6509-30-20 6509-38-20 6509-38-24

GE 6 S GE 8 S GE 8 S GE 10 S GE 10 S GE 12 S GE 12 S GE 14 S GE 16 S GE 16 S GE 16 S GE 20 S GE 20 S GE 20 S GE 25 S GE 25 S GE 30 S GE 30 S GE 38 S GE 38 S

6 mm 8 mm 8 mm 10 mm 10 mm 12 mm 12 mm 14 mm 16 mm 16 mm 16 mm 20 mm 20 mm 20 mm 25 mm 25 mm 30 mm 30 mm 38 mm 38 mm

G 1/4" G 1/4" G 3/8" G 1/4" G 3/8" G 1/4" G 3/8" G 1/2" G 3/8" G 1/2" G 3/4" G 1/2" G 3/4" G 1" G 3/4" G 1" G 1" G 1 1/4" G 1 1/4" G 1 1/2"

When different connection dimensions are possible, the standard dimension is noted in bold text.

246

PRODUCT CATALOGUE 2009


Product group 600

HYDROSCAND Cutting ring fittings 6009

6010

GE – G/ED Straight body with male G-thread

GE – M/ED Straight fitting – M M

ED sealing. ISO 1179-2

ED sealing. ISO 9974-2

Part number

Type

Pipe size

Thread

6009-06-03 6009-08-05 6009-10-05 6009-10-07 6009-12-07 6009-12-09 6009-15-07 6009-15-09 6009-18-09 6009-18-13 6009-22-13 6009-28-17 6009-35-21 6009-42-25

GE 6 L Body GE 8 L Body GE 10 L Body GE 10 L Body GE 12 L Body GE 12 L Body GE 15 L Body GE 15 L Body GE 18 L Body GE 18 L Body GE 22 L Body GE 28 L Body GE 35 L Body GE 42 L Body

6 mm 8 mm 10 mm 10 mm 12 mm 12 mm 15 mm 15 mm 18 mm 18 mm 22 mm 28 mm 35 mm 42 mm

G 1/8" G 1/4" G 1/4" G 3/8" G 3/8" G 1/2" G 3/8" G 1/2" G 1/2" G 3/4" G 3/4" G 1" G 1 1/4" G 1 1/2"

6509-06-05 6509-08-05 6509-10-07 6509-12-07 6509-12-09 6509-14-09 6509-16-09 6509-16-13 6509-20-09 6509-20-13 6509-20-17 6509-25-13 6509-25-17 6509-30-17 6509-30-21 6509-38-21 6509-38-25

GE 6 S Body GE 8 S Body GE 10 S Body GE 12 S Body GE 12 S Body GE 14 S Body GE 16 S Body GE 16 S Body GE 20 S Body GE 20 S Body GE 20 S Body GE 25 S Body GE 25 S Body GE 30 S Body GE 30 S Body GE 38 S Body GE 38 S Body

6 mm 8 mm 10 mm 12 mm 12 mm 14 mm 16 mm 16 mm 20 mm 20 mm 20 mm 25 mm 25 mm 30 mm 30 mm 38 mm 38 mm

G 1/4" G 1/4" G 3/8" G 3/8" G 1/2" G 1/2" G 1/2" G 3/4" G 1/2" G 3/4" G 1" G 3/4" G 1" G 1" G 1 1/4" G 1 1/4" G 1 1/2"

PRODUCT CATALOGUE 2009

Part number

Type

Pipe size

Thread

6010-06-10 6010-08-12 6010-10-12 6010-10-14 6010-10-16 6010-12-16 6010-15-18 6010-15-22 6010-18-22 6010-22-26 6010-28-33 6010-35-42 6010-42-48

GE 6 L GE 8 L GE 10 L GE 10 L GE 10 L GE 12 L GE 15 L GE 15 L GE 18 L GE 22 L GE 28 L GE 35 L GE 42 L

6 mm 8 mm 10 mm 10 mm 10 mm 12 mm 15 mm 15 mm 18 mm 22 mm 28 mm 35 mm 42 mm

M 10 x 1.0 M 12 x 1.5 M 12 x 1.5 M 14 x 1.5 M 16 x 1.5 M 16 x 1.5 M 18 x 1.5 M 22 x 1.5 M 22 x 1.5 M 26 x 1.5 M 33 x 2.0 M 42 x 2.0 M 48 x 2.0

6510-06-12 6510-08-14 6510-10-16 6510-12-18 6510-14-20 6510-16-22 6510-20-27 6510-25-33 6510-30-42 6510-38-48

GE GE GE GE GE GE GE GE GE GE

6 8 10 12 14 16 20 25 30 38

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

mm mm mm mm mm mm mm mm mm mm

M M M M M M M M M M

12 14 16 18 20 22 27 33 42 48

x x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

6010 GE – M/ED Straight body with male M-thread ED sealing. ISO 9974-2 Part number

Type

6010-06-11 6010-08-13 6010-10-15 6001-12-15 6010-12-17 6010-15-19 6010-18-23 6010-22-27 6010-35-43 6010-42-49

GE 6 L Body GE 8 L Body GE 10 L Body GE 12 L Body GE 12 L Body GE15 L Body GE 18 L Body GE 22 L Body GE 35 L Body GE 42 L Body

6 mm M 10 x 1.0 8 mm M 12 x 1.5 10 mm M 14 x 1.5 12 mm M 14 x 1.5 12 mm M 16 x 1.5 15 mm M 18 x 1.5 18 mm M 22 x 1.5 22 mm M 26 x 1.5 35 mm M 42 x 2.0 42 mm M 48 x 2.0

6510-06-13 6510-08-15 6510-10-17 6510-12-19 6510-14-21 6510-16-23 6510-20-28 6510-25-34 6510-30-43 6510-38-49

GE GE GE GE GE GE GE GE GE GE

6 8 10 12 14 16 20 25 30 38

6 S Body 8 S Body 10 S Body 12 S Body 14 S Body 16 S Body 20 S Body 25 S Body 30 S Body 38 S Body

Pipe size

mm mm mm mm mm mm mm mm mm mm

Thread

M M M M M M M M M M

12 14 16 18 20 22 27 33 42 48

x x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

247

6


HYDROSCAND Cutting ring fittings

Part number

Type

6011-06-02 6011-06-04 6011-08-02 6011-08-04 6011-08-06 6011-10-04 6011-10-06 6011-12-04 6011-12-06 6011-12-08 6011-15-06 6011-15-08 6011-18-08 6011-22-12

WE 6 L WE 6 L WE 8 L WE 8 L WE 8 L WE 10 L WE 10 L WE 12 L WE 12 L WE 12 L WE 15 L WE 15 L WE 18 L WE 22 L

6511-06-04 6511-08-04 6511-10-06 6511-12-06 6511-14-08 6511-16-08

WE WE WE WE WE WE

6 S 8 S 10 S 12 S 14 S 16 S

Product group 600

6011

6014

WE – R/C 90° elbow fitting – R M

WE – MKC 90° elbow fitting – MK M

Cone sealing. C DIN 3852

Cone sealing. C DIN 3852

Pipe size

Thread

Part number

Type

6 mm 6 mm 8 mm 8 mm 8 mm 10 mm 10 mm 12 mm 12 mm 12 mm 15 mm 15 mm 18 mm 22 mm

R 1/8" R 1/4" R 1/8" R 1/4" R 3/8" R 1/4" R 3/8" R 1/4" R 3/8" R 1/2" R 3/8" R 1/2" R 1/2" R 3/4"

6014-06-10 6014-08-12 6014-10-14 6014-12-16 6014-15-18 6014-18-22

WE WE WE WE WE WE

6 L 8 L 10 L 12 L 15 L 18 L

6 8 10 12 15 18

mm mm mm mm mm mm

M M M M M M

10 12 14 16 18 22

x x x x x x

1.0 1.5 1.5 1.5 1.5 1.5

6514-06-12 6514-08-14 6514-10-16 6514-12-18 6514-14-20 6514-16-22

WE WE WE WE WE WE

6 S 8 S 10 S 12 S 14 S 16 S

6 8 10 12 14 16

mm mm mm mm mm mm

M M M M M M

12 14 16 18 20 22

x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5

6 8 10 12 14 16

mm mm mm mm mm mm

R R R R R R

Pipe size

Thread

1/4" 1/4" 3/8" 3/8" 1/2" 1/2"

6013

6016

WE – GB 90° elbow fitting – G M

WE – MB 90° elbow fitting – M M

Cutting edge. B DIN 3852

Cutting edge. B DIN 3852

Part number

Type

Pipe size

6013-22-12 6013-28-16 6013-35-20 6013-42-24

WE WE WE WE

22 28 35 42

L L L L

22 28 35 42

6513-20-12 6513-25-16 6513-30-20 6513-38-24

WE WE WE WE

20 25 30 38

S S S S

20 25 30 38

Thread

Part number

Type

mm mm mm mm

G 3/4" G 1" G 1 1/4" G 1 1/2"

6016-22-26 6016-28-33 6016-35-42 6016-42-48

WE WE WE WE

22 28 35 42

L L L L

22 28 35 42

mm mm mm mm

M M M M

26 33 42 48

x x x x

1.5 2.0 2.0 2.0

mm mm mm mm

G 3/4" G 1" G 1 1/4" G 1 1/2"

6516-20-27 6516-25-33 6516-30-42 6516-38-48

WE WE WE WE

20 25 30 38

S S S S

20 25 30 38

mm mm mm mm

M M M M

27 33 42 48

x x x x

2.0 2.0 2.0 2.0

Pipe size

Thread

When different connection dimensions are possible, the standard dimension is noted in bold text.

248

PRODUCT CATALOGUE 2009


Product group 600

HYDROSCAND Cutting ring fittings 6017

6021

WE – NPT 90° elbow fitting NPT

TE – R/C T-fitting – R M

Cone sealing. ANSI/ASME B1.20.1-1983

Cone sealing. C DIN 3852

Part number

Type

Pipe size

Thread

6017-06-02 6017-08-04 6017-10-04 6017-12-06 6017-15-08 6017-18-08 6017-22-12 6017-28-16 6017-35-20 6017-42-24

WE WE WE WE WE WE WE WE WE WE

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm 1/8"- 27 mm 1/4"- 18 mm 1/4"-18 mm 3/8"- 18 mm 1/2"- 14 mm 1/2"- 14 mm 3/4"- 14 mm 1"-11½ mm 1 1/4"-11½ mm 1 1/2"-11½

NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT

6517-06-04 6517-08-04 6517-10-06 6517-12-06 6517-14-08 6517-16-08 6517-20-12 6517-25-16 6517-30-20

WE WE WE WE WE WE WE WE WE

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S

6 8 10 12 14 16 20 25 30

mm 1/4"- 18 mm 1/4"- 18 mm 3/8"- 18 mm 3/8"- 18 mm 1/2" - 14 mm 1/2"- 14 mm 3/4"- 14 mm 1"-11½ mm 1 1/4"-11½

NPT NPT NPT NPT NPT NPT NPT NPT NPT

Part number

Type

Pipe size

Thread

6021-06-02 6021-08-04 6021-10-04 6021-12-06 6021-15-08 6021-18-08

TE TE TE TE TE TE

6 L 8 L 10 L 12 L 15 L 18 L

6 8 10 12 15 18

mm mm mm mm mm mm

R R R R R R

1/8" 1/4" 1/4" 3/8" 1/2" 1/2"

6521-06-04 6521-08-04 6521-10-06 6521-12-06 6521-14-08 6521-16-08

TE TE TE TE TE TE

6 S 8 S 10 S 12 S 14 S 16 S

6 8 10 12 14 16

mm mm mm mm mm mm

R R R R R R

1/4" 1/4" 3/8" 3/8" 1/2" 1/2"

6018

6023

VEE – G M Adjustable elbow 45°

TE – GB T-fitting – G M

O-ring with washer. ISO 1174-3

Cutting edge. B DIN 3852

Part number

Type

6018-06-02 6018-08-04 6018-10-04 6018-12-06 6018-15-08 6018-18-08 6018-22-12 6018-28-16 6018-35-20 6018-42-24

VEE VEE VEE VEE VEE VEE VEE VEE VEE VEE

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

6518-06-04 6518-08-04 6518-10-06 6518-12-06 6518-14-08 6518-16-08 6518-20-12 6518-25-16 6518-30-20 6518-38-24

VEE VEE VEE VEE VEE VEE VEE VEE VEE VEE

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

PRODUCT CATALOGUE 2009

Pipe size

Thread

Part number

Type

G G G G G G G

6023-22-12 6023-28-16 6023-35-20 6023-42-24

TE TE TE TE

22 28 35 42

L L L L

22 28 35 42

mm mm mm mm

G 3/4" G 1" G 1 1/4" G 1 1/2"

6523-20-12 6523-25-16 6523-30-20 6523-38-24

TE TE TE TE

20 25 30 38

S S S S

20 25 30 38

mm mm mm mm

G 3/4" G 1" G 1 1/4" G 1 1/2"

1/8" 1/4" 1/4" 3/8" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

Pipe size

Thread

G G G G G G G

1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

249

6


HYDROSCAND Cutting ring fittings

Product group 600

6031

6036

LE – R/C L-fitting – R M

LE – MB L-fitting – M M

Cone sealing. C DIN 3852

Cutting edge. B DIN 3852

Part number

Type

Pipe size

6031-06-02 6031-08-04 6031-10-04 6031-12-06 6031-15-08 6031-18-08

LE LE LE LE LE LE

6 L 8 L 10 L 12 L 15 L 18 L

6 8 10 12 15 18

6531-06-04 6531-08-04 6531-10-06 6531-12-06 6531-14-08 6531-16-08

LE6 S LE8 S LE10 S LE12 S LE14 S LE16 S

6 8 10 12 14 16

Thread

Part number

Type

mm mm mm mm mm mm

R R R R R R

1/8" 1/4" 1/4" 3/8" 1/2" 1/2"

6036-22-26 6036-28-33 6036-35-42 6036-42-48

LE LE LE LE

mm mm mm mm mm mm

R R R R R R

1/4" 1/4" 3/8" 3/8" 1/2" 1/2"

6033 LE – R/C L-fitting – G M Cutting edge. B DIN 3852 Part number

Type

Pipe size

6033-22-12 6033-28-16 6033-35-20 6033-42-24

LE LE LE LE

22 28 35 42

L L L L

22 28 35 42

mm mm mm mm

G 3/4" G 1" G 1 1/4" G 1 1/2"

6533-20-12 6533-25-16 6533-30-20 6533-38-24

LE LE LE LE

20 25 30 38

S S S S

20 25 30 38

mm mm mm mm

G 3/4" G 1" G 1 1/4" G 1 1/2"

22 28 35 42

Pipe size L L L L

22 28 35 42

LE LE LE LE LE LE

250

6 L 8 L 10 L 12 L 15 L 18 L

Pipe size 6 8 10 12 15 18

mm mm mm mm mm mm

x x x x

1.5 2.0 2.0 2.0

Part number

Type

Pipe size

6035-06-06 6035-08-08 6035-10-10 6035-12-12 6035-15-15 6035-18-18 6035-22-22 6035-28-28 6035-35-35 6035-42-42

DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO

6 x DKLO 6 8 x DKLO 8 10 x DKLO 10 12 x DKLO 12 15 x DKLO 15 18 x DKLO 18 22 x DKLO 22 28 x DKLO 28 35 x DKLO 35 42 x DKLO 42

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

6535-06-06 6535-08-08 6535-10-10 6535-12-12 6535-14-14 6535-16-16 6535-20-20 6535-25-25 6535-30-30 6535-38-38

DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO

6 x DKSO 6 8 x DKSO 8 10 x DKSO 10 12 x DKSO 12 14 x DKSO 14 16 x DKSO 16 20 x DKSO 20 25 x DKSO 25 30 x DKSO 30 38 x DKSO 38

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

Thread

Cone sealing. C DIN 3852

6034-06-10 6034-08-12 6034-10-14 6034-12-16 6034-15-18 6034-18-22

26 33 42 48

DKLO Straight joint fitting

6235 DKLO–DKSO Straight joint fitting

LE – MK/C L-fitting – MK M

Type

M M M M

6035

6033

Part number

mm mm mm mm

Thread

Thread M M M M M M

10 12 14 16 18 22

x x x x x x

1.0 1.5 1.5 1.5 1.5 1.5

k k k k k k

Part number

Type

6235-10-12 6235-10-14 6235-12-14 6235-12-16 6235-15-16 6235-15-20 6235-18-20 6235-18-25

DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO

Pipe size 10 10 12 12 15 15 18 18

x x x x x x x x

DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO

12 14 14 16 16 20 20 25

10 10 12 12 15 15 18 18

mm-12 mm-14 mm-14 mm-16 mm-16 mm-20 mm-20 mm-25

mm mm mm mm mm mm mm mm

PRODUCT CATALOGUE 2009


Product group 600

HYDROSCAND Cutting ring fittings

6041

6043

G Straight joint fitting

T T-Joint fitting

Part number

Type

Pipe size

6041-06-06 6041-08-08 6041-10-10 6041-12-12 6041-15-15 6041-18-18 6041-22-22 6041-28-28 6041-35-35 6041-42-42

G G G G G G G G G G

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

6541-06-06 6541-08-08 6541-10-10 6541-12-12 6541-14-14 6541-16-16 6541-20-20 6541-25-25 6541-30-30 6541-38-38

G G G G G G G G G G

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

Type

Pipe size

mm mm mm mm mm mm mm mm mm mm

6043-06-06 6043-08-08 6043-10-10 6043-12-12 6043-15-15 6043-18-18 6043-22-22 6043-28-28 6043-35-35 6043-42-42

T T T T T T T T T T

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

mm mm mm mm mm mm mm mm mm mm

6543-06-06 6543-08-08 6543-10-10 6543-12-12 6543-14-14 6543-16-16 6543-20-20 6543-25-25 6543-30-30 6543-38-38

T T T T T T T T T T

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

6042

6044

W Elbow joint fitting

K Cross joint fitting

Part number

Type

6042-06-06 6042-08-08 6042-10-10 6042-12-12 6042-15-15 6042-18-18 6042-22-22 6042-28-28 6042-35-35 6042-42-42

W W W W W W W W W W

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

6542-06-06 6542-08-08 6542-10-10 6542-12-12 6542-14-14 6542-16-16 6542-20-20 6542-25-25 6542-30-30 6542-38-38

W W W W W W W W W W

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

PRODUCT CATALOGUE 2009

Part number

Pipe size

Part number

Type

Pipe size

mm mm mm mm mm mm mm mm mm mm

6044-06-06 6044-08-08 6044-10-10 6044-12-12 6044-15-15 6044-18-18 6044-22-22 6044-28-28 6044-35-35 6044-42-42

K K K K K K K K K K

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

mm mm mm mm mm mm mm mm mm mm

6544-06-06 6544-08-08 6544-10-10 6544-12-12 6544-14-14 6544-16-16 6544-20-20 6544-25-25 6544-30-30 6544-38-38

K K K K K K K K K K

6S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

251

6


HYDROSCAND Cutting ring fittings

6045

6047

SV Bulkhead connection

AS Straight welding boss

Part number

Type

6045-06-06 6045-08-08 6045-10-10 6045-12-12 6045-15-15 6045-18-18 6045-22-22 6045-28-28 6045-35-35 6045-42-42

SV SV SV SV SV SV SV SV SV SV

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

M M M M M M M M M M

12 14 16 18 22 26 30 36 45 52

x x x x x x x x x x

6545-06-06 6545-08-08 6545-10-10 6545-12-12 6545-14-14 6545-16-16 6545-20-20 6545-25-25 6545-30-30 6545-38-38

SV SV SV SV SV SV SV SV SV SV

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

M M M M M M M M M M

14 16 18 20 22 24 30 36 42 52

x x x x x x x x x x

Pipe size

Bulk thread

Part number

Type

1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

6047-06-06 6047-08-08 6047-10-10 6047-12-12 6047-15-15 6047-18-18 6047-22-22 6047-28-28 6047-35-35 6047-42-42

AS 6 L AS 8 L AS 10 L AS 12 L AS 15 L AS 18 L AS 22 L AS 28 L AS 35 L AS42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

10 12 14 16 19 22 27 32 40 46

mm mm mm mm mm mm mm mm mm mm

1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

6547-06-06 6547-08-08 6547-10-10 6547-12-12 6547-14-14 6547-16-16 6547-20-20 6547-25-25 6547-30-30 6547-38-38

AS AS AS AS AS AS AS AS AS AS

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

11 13 15 17 19 21 26 31 36 44

mm mm mm mm mm mm mm mm mm mm

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

Pipe size

Ø Body

6046

6048

WSV Elbow bulkhead connection

ESV Welding bulkhead connection

Part number

Type

6046-06-06 6046-08-08 6046-10-10 6046-12-12 6046-15-15 6046-18-18 6046-22-22 6046-28-28 6046-35-35 6046-42-42

WSV WSV WSV WSV WSV WSV WSV WSV WSV WSV

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

M M M M M M M M M M

12 14 16 18 22 26 30 36 45 52

x x x x x x x x x x

6546-06-06 6546-08-08 6546-10-10 6546-12-12 6546-14-14 6546-16-16 6546-20-20 6546-25-25 6546-30-30 6546-38-38

WSV WSV WSV WSV WSV WSV WSV WSV WSV WSV

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

M M M M M M M M M M

14 16 18 20 22 24 30 36 42 52

x x x x x x x x x x

252

Product group 600

Pipe size

Bulk thread

Part number

Type

Pipe size

Ø Ferrule

1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

6048-06-06 6048-08-08 6048-10-10 6048-12-12 6048-15-15 6048-18-18 6048-22-22 6048-28-28 6048-35-35 6048-42-42

ESV ESV ESV ESV ESV ESV ESV ESV ESV ESV

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

18 20 22 25 28 32 36 40 50 60

mm mm mm mm mm mm mm mm mm mm

1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

6548-06-06 6548-08-08 6548-10-10 6548-12-12 6548-14-14 6548-16-16 6548-20-20 6548-25-25 6548-30-30 6548-38-38

ESV ESV ESV ESV ESV ESV ESV ESV ESV ESV

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

20 22 25 28 30 35 38 45 50 60

mm mm mm mm mm mm mm mm mm mm

PRODUCT CATALOGUE 2009


Product group 600

HYDROSCAND Cutting ring fittings 6051

6049

EVWO Adjustable elbow fitting

WAS Elbow welding fitting Part number

Type

Pipe size

6049-06-06 6049-08-08 6049-10-10 6049-12-12 6049-15-15 6049-18-18 6049-22-22 6049-28-28 6049-35-35 6049-42-42

WAS WAS WAS WAS WAS WAS WAS WAS WAS WAS

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

6549-06-06 6549-08-08 6549-10-10 6549-12-12 6549-14-14 6549-16-16 6549-20-20 6549-25-25 6549-30-30 6549-38-38

WAS WAS WAS WAS WAS WAS WAS WAS WAS WAS

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

Part number

Type

Pipe size

mm mm mm mm mm mm mm mm mm mm

10 12 14 16 19 22 27 32 40 46

mm mm mm mm mm mm mm mm mm mm

6051-06-06 6051-08-08 6051-10-10 6051-12-12 6051-15-15 6051-18-18 6051-22-22 6051-28-28 6051-35-35 6051-42-42

EVWO EVWO EVWO EVWO EVWO EVWO EVWO EVWO EVWO EVWO

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

mm mm mm mm mm mm mm mm mm mm

11 13 15 17 19 21 26 31 36 44

mm mm mm mm mm mm mm mm mm mm

6551-06-06 6551-08-08 6551-10-10 6551-12-12 6551-14-14 6551-16-16 6551-20-20 6551-25-25 6551-30-30 6551-38-38

EVWO EVWO EVWO EVWO EVWO EVWO EVWO EVWO EVWO EVWO

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

6060

EVW Adjustable elbow fitting

EVT Adjustable T-fitting

Type

6050-06-06 6050-08-08 6050-10-10 6050-12-12 6050-15-15 6050-18-18 6050-22-22 6050-28-28 6050-35-35 6050-42-42

EVW EVW EVW EVW EVW EVW EVW EVW EVW EVW

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6550-06-06 6550-08-08 6550-10-10 6550-12-12 6550-14-14 6550-16-16 6550-20-20 6550-25-25 6550-30-30 6550-38-38

EVW EVW EVW EVW EVW EVW EVW EVW EVW EVW

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

S I D

Ă&#x2DC; Body

6050

Part number

N O C

With O-ring

N I T

PRODUCT CATALOGUE 2009

Pipe size

D E U

T

Part number

Type

Pipe size

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

6060-06-06 6060-08-08 6060-10-10 6060-12-12 6060-15-15 6060-18-18 6060-22-22 6060-28-28 6060-35-35 6060-42-42

EVT EVT EVT EVT EVT EVT EVT EVT EVT EVT

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

6560-06-06 6560-08-08 6560-10-10 6560-12-12 6560-14-14 6560-16-16 6560-20-20 6560-25-25 6560-30-30 6560-38-38

EVT EVT EVT EVT EVT EVT EVT EVT EVT EVT

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

E P Y

S I D

N O C

N I T

D E U

T

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

E P Y

253

6


HYDROSCAND Cutting ring fittings

Product group 600

6061

6071

EVTO Adjustable T-fitting

EVL Adjustable L-fitting

With O-ring

With O-ring

Part number

Type

Pipe size

6061-06-06 6061-08-08 6061-10-10 6061-12-12 6061-15-15 6061-18-18 6061-22-22 6061-28-28 6061-35-35 6061-42-42

EVTO EVTO EVTO EVTO EVTO EVTO EVTO EVTO EVTO EVTO

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

6561-06-06 6561-08-08 6561-10-10 6561-12-12 6561-14-14 6561-16-16 6561-20-20 6561-25-25 6561-30-30 6561-38-38

EVTO EVTO EVTO EVTO EVTO EVTO EVTO EVTO EVTO EVTO

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

Part number

Type

Pipe size

mm mm mm mm mm mm mm mm mm mm

6071-06-06 6071-08-08 6071-10-10 6071-12-12 6071-15-15 6071-18-18 6071-22-22 6071-28-28 6071-35-35 6071-42-42

EVLO EVLO EVLO EVLO EVLO EVLO EVLO EVLO EVLO EVLO

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

mm mm mm mm mm mm mm mm mm mm

6571-06-06 6571-08-08 6571-10-10 6571-12-12 6571-14-14 6571-16-16 6571-20-20 6571-25-25 6571-30-30 6571-38-38

EVLO EVLO EVLO EVLO EVLO EVLO EVLO EVLO EVLO EVLO

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

6070 EVL Adjustable L-fitting Part number

Type

6070-06-06 6070-08-08 6070-10-10 6070-12-12 6070-15-15 6070-18-18 6070-22-22 6070-28-28 6070-35-35 6070-42-42

EVL EVL EVL EVL EVL EVL EVL EVL EVL EVL

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6570-06-06 6570-08-08 6570-10-10 6570-12-12 6570-14-14 6570-16-16 6570-20-20 6570-25-25 6570-30-30 6570-38-38

EVL EVL EVL EVL EVL EVL EVL EVL EVL EVL

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

S I D

254

N O C

Pipe size

N I T

D E U

T

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

E P Y

PRODUCT CATALOGUE 2009


Product group 600

HYDROSCAND Cutting ring fittings 6083

6089

EVGE–GB Straight standpipe

EVGE–ED Straight standpipe

With pre-assembled nut, cutting edge. ISO 1179-4

With pre-assembled nut. ED sealing. ISO 1179-2

Part number

Type

Pipe size

Thread

6083-06-02 6083-06-04 6083-08-04 6083-10-04 6083-12-04 6083-12-06 6083-12-08 6083-15-08 6083-18-08 6083-18-12 6083-22-08 6083-22-12 6083-28-16 6083-35-20 6083-42-24

EVGE 6 L EVGE 6 L EVGE8 L EVGE 10 L EVGE 12 L EVGE 12 L EVGE 12 L EVGE 15 L EVGE 18 L EVGE 18 L EVGE 22 L EVGE 22 L EVGE 28 L EVGE 35 L EVGE 42 L

6 mm 6 mm 8 mm 10 mm 12 mm 12 mm 12 mm 15 mm 18 mm 18 mm 22 mm 22 mm 28 mm 35 mm 42 mm

G 1/8" G 1/4" G 1/4" G 1/4" G 1/4" G 3/8" G 1/2" G 1/2" G 1/2" G 3/4" G 1/2" G 3/4" G 1" G 1 1/4" G 1 1/2"

6583-06-04 6583-08-04 6583-10-04 6583-10-06 6583-12-06 6583-12-08 6583-14-08 6583-16-08 6583-16-12 6583-20-12 6583-25-12 6583-25-16 6583-30-20 6583-38-24

EVGE 6 S EVGE 8 S EVGE 10 S EVGE 10 S EVGE 12 S EVGE 12 S EVGE 14 S EVGE 16 S EVGE 16 S EVGE 20 S EVGE 25 S EVGE 25 S EVGE 30 S EVGE 38 S

6 mm 8 mm 10 mm 10 mm 12 mm 12 mm 14 mm 16 mm 16 mm 20 mm 25 mm 25 mm 30 mm 38 mm

G 1/4" G 1/4" G 1/4" G 3/8" G 3/8" G 1/2" G 1/2" G 1/2" G 3/4" G 3/4" G 3/4" G 1" G 1 1/4" G 1 1/2"

Part number

Type

Pipe size

Thread

6089-06-02 6089-08-04 6089-10-04 6089-10-06 6089-12-04 6089-12-06 6089-12-08 6089-15-08 6089-18-08 6089-22-12 6089-28-16 6089-35-20 6089-42-24

EVGE 6 L EVGE 8 L EVGE 10 L EVGE 10 L EVGE 12 L EVGE 12 L EVGE 12 L EVGE 15 L EVGE 18 L EVGE 22 L EVGE 28 L EVGE 35 L EVGE 42 L

6 mm 8 mm 10 mm 10 mm 12 mm 12 mm 12 mm 15 mm 18 mm 22 mm 28 mm 35 mm 42 mm

G 1/8" G 1/4" G 1/4" G 3/8" G 1/4" G 3/8" G 1/2" G 1/2" G 1/2" G 3/4" G 1" G 1 1/4" G 1 1/2"

6589-06-04 6589-08-04 6589-10-06 6589-12-06 6589-12-08 6589-14-08 6589-16-08 6589-20-12 6589-25-16 6589-30-20 6589-38-24

EVGE 6 S EVGE 8 S EVGE 10 S EVGE 12 S EVGE 12 S EVGE 14 S EVGE 16 S EVGE 20 S EVGE 25 S EVGE 30 S EVGE 38 S

6 mm 8 mm 10 mm 12 mm 12 mm 14 mm 16 mm 20 mm 25 mm 30 mm 38 mm

G 1/4" G 1/4" G 3/8" G 3/8" G 1/2" G 1/2" G 1/2" G 3/4" G 1" G 1 1/4" G 1 1/2"

6

When different connection dimensions are possible, the standard dimension is noted in bold text.

PRODUCT CATALOGUE 2009

255


HYDROSCAND Cutting ring fittings

Product group 600

6090

6101

EVGEO – G/ED Straight standpipe

GAI – G Straight fitting – G F

With pre-assembled nut and O-ring. ED sealing. ISO 1179-2 Part number

Type

Pipe size

Thread

Part number

Type

6090-06-02 6090-06-04 6090-08-04 6090-10-04 6090-10-06 6090-12-04 6090-12-06 6090-12-08 6090-15-08 6090-18-08 6090-22-12 6090-28-16 6090-35-20 6090-42-24

EVGEO 6 L 6 mm EVGEO 6 L 6 mm EVGEO 8 L 8 mm EVGEO 10 L 10 mm EVGEO 10 L 10 mm EVGEO 12 L 12 mm EVGEO 12 L 12 mm EVGEO 12 L 12 mm EVGEO 15 L 15 mm EVGEO 18 L 18 mm EVGEO 22 L 22 mm EVGEO 28 L 28 mm EVGEO 35 L 35 mm EVGEO 42 L 42 mm

G 1/8" G 1/4" G 1/4" G 1/4" G 3/8" G 1/4" G 3/8" G 1/2" G 1/2" G 1/2" G 3/4" G 1" G 1 1/4" G 1 1/2"

6101-06-02 6101-08-04 6101-08-06 6101-10-04 6101-12-04 6101-12-06 6101-12-08 6101-15-08 6101-18-08 6101-22-12 6101-28-16 6101-35-20 6101-42-24

GAI GAI GAI GAI GAI GAI GAI GAI GAI GAI GAI GAI GAI

6 L 8 L 8 L 10 L 12 L 12 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 8 10 12 12 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm mm mm mm

6590-06-04 6590-08-04 6590-10-04 6590-10-06 6590-12-06 6590-12-08 6590-14-08 6590-16-08 6590-16-12 6590-20-12 6590-25-12 6590-25-16 6590-30-20 6590-38-24

EVGEO 6 S EVGEO 8 S EVGEO 10 S EVGEO 10 S EVGEO 12 S EVGEO 12 S EVGEO 14 S EVGEO 16 S EVGEO 16 S EVGEO 20 S EVGEO 25 S EVGEO 25 S EVGEO 30 S EVGEO 38 S

G 1/4" G 1/4" G 1/4" G 3/8" G 3/8" G 1/2" G 1/2" G 1/2" G 3/4" G 3/4" G 3/4" G 1" G 1 1/4" G 1 1/2"

6601-06-04 6601-08-04 6601-10-06 6601-12-06 6601-14-08 6601-16-08 6601-20-12 6601-25-16 6601-30-20 6601-38-24

GAI GAI GAI GAI GAI GAI GAI GAI GAI GAI

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

6 mm 8 mm 10 mm 10 mm 12 mm 12 mm 14 mm 16 mm 16 mm 20 mm 25 mm 25 mm 30 mm 38 mm

Pipe size

Thread G G G G G G G G G G

1/8" 1/4" 3/8" 1/4" 1/4" 3/8" 1/2" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G G G G G G G

1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

6092

6102

EVGEO – M/ED Straight standpipe

GAI – M Straight fitting – M F

With pre-assembled nut and O-ring. ED sealing. ISO 9974-2 Part number

Type

6092-06-10 6092-08-12 6092-10-14 6092-12-16 6092-15-18 6092-18-22 6092-22-26 6092-28-33 6092-35-42 6092-42-48

EVGEO EVGEO EVGEO EVGEO EVGEO EVGEO EVGEO EVGEO EVGEO EVGEO

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

M M M M M M M M M M

10 12 14 16 18 22 26 33 42 48

x x x x x x x x x x

1.0 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0

6592-06-12 6592-08-14 6592-10-16 6592-12-18 6592-14-20 6592-16-22 6592-20-27 6592-25-33 6592-30-42 6592-38-48

EVGEO EVGEO EVGEO EVGEO EVGEO EVGEO EVGEO EVGEO EVGEO EVGEO

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

M M M M M M M M M M

12 14 16 18 20 22 27 33 42 48

x x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

256

Pipe size

Thread

Part number

Type

Pipe size

Thread

6102-06-10 6102-08-12 6102-10-14 6102-12-16 6102-15-18 6102-18-22 6102-22-26

GAI GAI GAI GAI GAI GAI GAI

6 L 8 L 10 L 12 L 15 L 18 L 22 L

6 8 10 12 15 18 22

mm mm mm mm mm mm mm

M M M M M M M

10 12 14 16 18 22 26

x x x x x x x

1.0 1.5 1.5 1.5 1.5 1.5 1.5

6602-06-12 6602-08-14 6602-10-16 6602-12-18 6602-14-20 6602-16-22 6602-20-27

GAI GAI GAI GAI GAI GAI GAI

6 S 8 S 10 S 12 S 14 S 16 S 20 S

6 8 10 12 14 16 20

mm mm mm mm mm mm mm

M M M M M M M

12 14 16 18 20 22 27

x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 2.0

When different connection dimensions are possible, the standard dimension is noted in bold text.

PRODUCT CATALOGUE 2009


Product group 600

HYDROSCAND Cutting ring fittings 6103

6105

MAV – G Manometer – fitting

RED Reduction – fitting

Cutting edge ring Part number

Type

Pipe size

6103-06-04 6103-08-04 6103-10-04 6103-12-04

MAV MAV MAV MAV

6 L 8 L 10 L 12 L

6 8 10 12

6603-06-08 6603-08-04 6603-08-08 6603-10-08 6603-12-08

MAV MAV MAV MAV MAV

6 S 8 S 8 S 10 S 12 S

6 8 8 10 12

Thread

Part number

Type

mm mm mm mm

G G G G

1/4" 1/4" 1/4" 1/4"

mm mm mm mm mm

G G G G G

1/2" 1/4" 1/2" 1/2" 1/2"

6105-08-06 6105-10-06 6105-10-08 6105-12-06 6105-12-08 6105-12-10 6105-15-06 6105-15-08 6105-15-10 6105-15-12 6105-18-08 6105-18-10 6105-18-12 6105-18-15 6105-22-12 6105-22-15 6105-22-18 6105-28-10 6105-28-15 6105-28-18 6105-28-22 6105-35-22 6105-35-28

RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED

8/6 L 10/6 L 10/8 L 12/6 L 12/8 L 12/10 L 15/6 L 15/8 L 15/10 L 15/12 L 18/8 L 18/10 L 18/12 L 18/15 L 22/12 L 22/15 L 22/18 L 28/10 L 28/15 L 28/18 L 28/22 L 35/22 L 35/28 L

8 mm-6 10 mm-6 10 mm-8 12 mm-6 12 mm-8 12 mm-10 15 mm-6 15 mm-8 15 mm-10 15 mm-12 18 mm-8 18 mm-10 18 mm-12 18 mm-15 22 mm-12 22 mm-15 22 mm-18 28 mm-10 28 mm-15 28 mm-18 28 mm-22 35 mm-22 35 mm-28

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

6605-08-06 6605-10-06 6605-10-08 6605-12-06 6605-12-08 6605-12-10 6605-14-10 6605-14-12 6605-16-10 6605-16-12 6605-16-14 6605-20-10 6605-20-12 6605-20-14 6605-20-16 6605-25-16 6605-25-20 6605-30-20 6605-30-25 6605-38-25 6605-38-30

RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED

8/6 S 10/6 S 10/8 S 12/6 S 12/8 S 12/10 S 14/10 S 14/12 S 16/10 S 16/12 S 16/14 S 20/10 S 20/12 S 20/14 S 20/16 S 25/16 S 25/20 S 30/20 S 30/25 S 38/25 S 38/30 S

8 mm-6 10 mm-6 10 mm-8 12 mm-6 12 mm-8 12 mm-10 14 mm-10 14 mm-12 16 mm-10 16 mm-12 16 mm-14 20 mm-10 20 mm-12 20 mm-14 20 mm-16 25 mm-16 25 mm-20 30 mm-20 30 mm-25 38 mm-25 38 mm-30

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Loose cutting edge rings for MAV Part number

Type

Size

6103-13-04 6603-13-08

Cutting edge ring Cutting edge ring

1/4" 1/2"

6104 MAV – EV – G Manometer Pre-assembled fitting Part number

Type

Pipe size

6104-06-04 6104-08-04 6104-10-04 6104-12-04

MAV-EV MAV-EV MAV-EV MAV-EV

6 L 8 L 10 L 12 L

6 8 10 12

mm mm mm mm

G G G G

1/4" 1/4" 1/4" 1/4"

6604-06-08 6604-08-08 6604-10-08 6604-12-08

MAV-EV MAV-EV MAV-EV MAV-EV

6 S 8 S 10 S 12 S

6 8 10 12

mm mm mm mm

G G G G

1/2" 1/2" 1/2" 1/2"

PRODUCT CATALOGUE 2009

Thread

Pipe size

257

6


HYDROSCAND Cutting ring fittings

Part number

Type

6107-08-06 6107-10-06 6107-10-08 6107-12-06 6107-12-08 6107-12-10 6107-15-06 6107-15-08 6107-15-10 6107-15-12 6107-18-06 6107-18-08 6107-18-10 6107-18-12 6107-18-15 6107-22-06 6107-22-08 6107-22-10 6107-22-12 6107-22-15 6107-22-18 6107-28-06 6107-28-08 6107-28-10 6107-28-12 6107-28-15 6107-28-18 6107-28-22 6107-35-06 6107-35-08 6107-35-10 6107-35-12 6107-35-15 6107-35-18 6107-35-22 6107-35-28 6107-42-10 6107-42-12 6107-42-15 6107-42-18 6107-42-22 6107-42-28 6107-42-35

KOR 8/6 L KOR 10/6 L KOR10/8 L KOR 12/6 L KOR 12/8 L KOR 12/10 L KOR 15/6 L KOR 15/8 L KOR 15/10 L KOR 15/12 L KOR 18/6 L KOR 18/8 L KOR 18/10 L KOR 18/12 L KOR 18/15 L KOR 22/6 L KOR 22/8 L KOR 22/10 L KOR 22/12 L KOR 22/15 L KOR 22/18 L KOR 28/6 L KOR 28/8 L KOR 28/10 L KOR 28/12 L KOR 28/15 L KOR 28/18 L KOR 28/22 L KOR 35/6 L KOR 35/8 L KOR 35/10 L KOR 35/12 L KOR 35/15 L KOR 35/18 L KOR 35/22 L KOR 35/28 L KOR 42/10 L KOR 42/12 L KOR 42/15 L KOR 42/18 L KOR 42/22 L KOR 42/28 L KOR 42/35 L

S I D

258

N O C

N I T

Product group 600

6107

6109

KOR – L Reduction

KORO – L Straight reduction

Pre-assembled nut

With O-ring

Pipe size

D E U

8 mm-6 10 mm-6 10 mm-8 12 mm-6 12 mm-8 12 mm-10 15 mm-6 15 mm-8 15 mm-10 15 mm-12 18 mm-6 18 mm-8 18 mm-10 18 mm-12 18 mm-15 22 mm-6 22 mm-8 22 mm-10 22 mm-12 22 mm-15 22 mm-18 28 mm-6 28 mm-8 28 mm-10 28 mm-12 28 mm-15 28 mm-18 28 mm-22 35 mm-6 35 mm-8 35 mm-10 35 mm-12 35 mm-15 35 mm-18 35 mm-22 35 mm-28 42 mm-10 42 mm-12 42 mm-15 42 mm-18 42 mm-22 42 mm-28 42 mm-35

T

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

E P Y

Part number

Type

6109-08-06 6109-10-06 6109-10-08 6109-12-06 6109-12-08 6109-12-10 6109-15-06 6109-15-08 6109-15-10 6109-15-12 6109-18-06 6109-18-08 6109-18-10 6109-18-12 6109-18-15 6109-22-06 6109-22-08 6109-22-10 6109-22-12 6109-22-15 6109-22-18 6109-28-06 6109-28-08 6109-28-10 6109-28-12 6109-28-15 6109-28-18 6109-28-22 6109-35-06 6109-35-08 6109-35-10 6109-35-12 6109-35-15 6109-35-18 6109-35-22 6109-35-28 6109-42-06 6109-42-08 6109-42-10 6109-42-12 6109-42-15 6109-42-18 6109-42-22 6109-42-28 6109-42-35

KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR

O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O

Pipe size 8/6 L 10/6 L 10/8 L 12/6 L 12/8 L 12/10 L 15/6 L 15/8 L 15/10 L 15/12 L 18/6 L 18/8 L 18/10 L 18/12 L 18/15 L 22/6 L 22/8 L 22/10 L 22/12 L 22/15 L 22/18 L 28/6 L 28/8 L 28/10 L 28/12 L 28/15 L 28/18 L 28/22 L 35/6 L 35/8 L 35/10 L 35/12 L 35/15 L 35/18 L 35/22 L 35/28 L 42/6 L 42/8 L 42/10 L 42/12 L 42/15 L 42/18 L 42/22 L 42/28 L 42/35 L

8 mm-6 10 mm-6 10 mm-8 12 mm-6 12 mm-8 12 mm-10 15 mm-6 15 mm-8 15 mm-10 15 mm-12 18 mm-6 18 mm-8 18 mm-10 18 mm-12 18 mm-15 22 mm-6 22 mm-8 22 mm-10 22 mm-12 22 mm-15 22 mm-18 28 mm-6 28 mm-8 28 mm-10 28 mm-12 28 mm-15 28 mm-18 28 mm-22 35 mm-6 35 mm-8 35 mm-10 35 mm-12 35 mm-15 35 mm-18 35 mm-22 35 mm-28 42 mm-6 42 mm-8 42 mm-10 42 mm-12 42 mm-15 42 mm-18 42 mm-22 42 mm-28 42 mm-35

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

PRODUCT CATALOGUE 2009


Product group 600

Part number

Type

6607-08-06 6607-10-06 6607-10-08 6607-12-06 6607-12-08 6607-12-10 6607-14-06 6607-14-08 6607-14-10 6607-14-12 6607-16-06 6607-16-08 6607-16-10 6607-16-12 6607-16-14 6607-20-06 6607-20-08 6607-20-10 6607-20-12 6607-20-14 6607-20-16 6607-25-06 6607-25-08 6607-25-10 6607-25-12 6607-25-14 6607-25-16 6607-25-20 6607-30-06 6607-30-08 6607-30-10 6607-30-12 6607-30-14 6607-30-16 6607-30-20 6607-30-25 6607-38-06 6607-38-08 6607-38-10 6607-38-12 6607-38-14 6607-38-16 6607-38-20 6607-38-25 6607-38-30

KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR

S I D

HYDROSCAND Cutting ring fittings 6609

KOR – S Reduction

KORO – S Straight reduction

Pre-assembled nut

With O-ring

Pipe size

8/6 S 10/6 S 10/8 S 12/6 S 12/8 S 12/10 S 14/6 S 14/8 S 14/10 S 14/12 S 16/6 S 16/8 S 16/10 S 16/12 S 16/14 S 20/6 S 20/8 S 20/10 S 20/12 S 20/14 S 20/16 S 25/6 S 25/8 S 25/10 S 25/12 S 25/14 S 25/16 S 25/20 S 30/6 S 30/8 S 30/10 S 30/12 S 30/14 S 30/16 S 30/20 S 30/25 S 38/6 S 38/8 S 38/10 S 38/12 S 38/14 S 38/16 S 38/20 S 38/25 S 38/30 S

N O C

6607

N I T

PRODUCT CATALOGUE 2009

8 mm-6 10 mm- 6 10 mm-8 12 mm-6 12 mm-8 12 mm-10 14 mm-6 14 mm-8 14 mm-10 14 mm-12 16 mm-6 16 mm-8 16 mm-10 16 mm-12 16 mm-14 20 mm-6 20 mm-8 20 mm-10 20 mm-12 20 mm-14 20 mm-16 25 mm-6 25 mm-8 25 mm-10 25 mm-12 25 mm-14 25 mm-16 25 mm-20 30 mm-6 30 mm-8 30 mm-10 30 mm-12 30 mm-14 30 mm-16 30 mm-20 30 mm-25 38 mm-6 38 mm-8 38 mm-10 38 mm-12 38 mm-14 38 mm-16 38 mm-20 38 mm-25 38 mm-30

D E U

T

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

E P Y

Part number

Type

6609-08-06 6609-10-06 6609-10-08 6609-12-06 6609-12-08 6609-12-10 6609-14-06 6609-14-08 6609-14-10 6609-14-12 6609-16-06 6609-16-08 6609-16-10 6609-16-12 6609-16-14 6609-20-06 6609-20-08 6609-20-10 6609-20-12 6609-20-14 6609-20-16 6609-25-06 6609-25-08 6609-25-10 6609-25-12 6609-25-14 6609-25-16 6609-25-20 6609-30-08 6609-30-10 6609-30-12 6609-30-16 6609-30-20 6609-30-25 6609-38-08 6609-38-12 6609-38-16 6609-38-20 6609-38-25 6609-38-30

KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR

O 8/6 S O 10/6 S O 10/8 S O 12/6 S O 12/8 S O12/10 S O 14/6 S O 14/8 S O 14/10 S O 14/12 S O 16/6 S O 16/8 S O 16/10 S O 16/12 S O 16/14 S O 20/6 S O 20/8 S O 20/10 S O 20/12 S O 20/14 S O 20/16 S O 25/6 S O 25/8 S O 25/10 S O 25/12 S O 25/14 S O 25/16 S O 25/20 S O 30/8 S O 30/10 S O 30/12 S O 30/16 S O 30/20 S O 30/25 S O 38/8 S O 38/12 S O 38/16 S O 38/20 S O 38/25 S O 38/30 S

Pipe size 8 mm-6 10 mm-6 10 mm- 8 12 mm-6 12 mm-8 12 mm-10 14 mm-6 14 mm-8 14 mm-10 14 mm-12 16 mm-6 16 mm-8 16 mm-10 16 mm-12 16 mm-14 20 mm-6 20 mm-8 20 mm-10 20 mm-12 20 mm-14 20 mm-16 25 mm-6 25 mm-8 25 mm-10 25 mm-12 25 mm-14 25 mm-16 25 mm-20 30 mm-8 30 mm-10 30 mm-12 30 mm-16 30 mm-20 30 mm-25 38 mm-8 38 mm-12 38 mm-16 38 mm-20 38 mm-25 38 mm-30

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

259

6


HYDROSCAND Cutting ring fittings

Product group 600

6110

6118

WHB – G Banjo – G M

WHO – G Banjo – G M

Cutting edge ring. Non-reducing.

Soft seal, Teflon. Non-reducing.

Part number

Type

6110-06-02 6110-08-04 6110-10-04 6110-12-04 6110-12-06 6110-15-08 6110-18-08 6110-22-12 6110-28-16 6110-35-20 6110-42-24

WHB 6 L WHB 8 L WHB 10 L WHB 12 L WHB 12 L WHB 15 L WHB 18 L WHB 22 L WHB 28 L WHB 35 L WHB 42 L

6610-06-04 6610-08-04 6610-10-06 6610-12-06 6610-14-08 6610-16-08 6610-20-12 6610-25-16 6610-30-20 6610-38-24

WHB WHB WHB WHB WHB WHB WHB WHB WHB WHB

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

Pipe size

Thread

Part number

Type

6 mm 8 mm 10 mm 12 mm 12 mm 15 mm 18 mm 22 mm 28 mm 35 mm 42 mm

G 1/8" G 1/4" G 1/4" G 1/4" G 3/8" G 1/2" G 1/2" G 3/4" G 1" G 1 1/4" G 1 1/2"

6118-06-02 6118-08-04 6118-10-04 6118-12-06 6118-15-08 6118-18-08 6118-22-12

WHO WHO WHO WHO WHO WHO WHO

6 L 8 L 10 L 12 L 15 L 18 L 22 L

6 8 10 12 15 18 22

mm mm mm mm mm mm mm

G G G G G G G

6618-06-04 6618-08-04 6618-10-06 6618-12-06 6618-14-08 6618-16-08 6618-20-12 6618-25-16 6618-30-20

WHO WHO WHO WHO WHO WHO WHO WHO WHO

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S

6 8 10 12 14 16 20 25 30

mm mm mm mm mm mm mm mm mm

G G G G G G G

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

G G G G G G G

1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

Pipe size

Thread 1/8" 1/4" 1/4" 3/8" 1/2" 1/2" 3/4"

1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" G 1" G 1 1/4"

6111

6119

WHB – M Banjo – M M

WHO – M Banjo – M M

Cutting edge ring. Non-reducing.

Soft seal, Teflon. Non-reducing.

Part number

Type

Pipe size

Thread

6111-06-10 6111-08-12 6111-10-14 6111-12-16 6111-15-18 6111-18-22 6111-22-26 6111-28-33 6111-35-42 6111-42-48

WHB WHB WHB WHB WHB WHB WHB WHB WHB WHB

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

M M M M M M M M M M

10 12 14 16 18 22 26 33 42 48

x x x x x x x x x x

1.0 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0

6611-06-12 6611-08-14 6611-10-16 6611-12-18 6611-16-22 6611-20-27 6611-25-33 6611-30-42 6611-38-48

WHB WHB WHB WHB WHB WHB WHB WHB WHB

6 S 8 S 10 S 12 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 16 20 25 30 38

mm mm mm mm mm mm mm mm mm

M M M M M M M M M

12 14 16 18 22 27 33 42 48

x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

Part number

Type

Pipe size

Thread

6119-06-10 6119-08-12 6119-10-14 6119-12-16 6119-15-18 6119-18-22 6119-22-26

WHO WHO WHO WHO WHO WHO WHO

6 L 8 L 10 L 12 L 15 L 18 L 22 L

6 8 10 12 15 18 22

mm mm mm mm mm mm mm

M M M M M M M

10 12 14 16 18 22 26

x x x x x x x

1.0 1.5 1.5 1.5 1.5 1.5 1.5

6619-06-12 6619-08-14 6619-10-16 6619-12-18 6619-14-20 6619-16-22 6619-20-27

WHO WHO WHO WHO WHO WHO WHO

6 S 8 S 10 S 12 S 14 S 16 S 20 S

6 8 10 12 14 16 20

mm mm mm mm mm mm mm

M M M M M M M

12 14 16 18 20 22 27

x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 2.0

When different connection dimensions are possible, the standard dimension is noted in bold text.

260

PRODUCT CATALOGUE 2009


Product group 600

HYDROSCAND Cutting ring fittings 6112

6116

DSVW – G Banjo – G M

WHBT – G Banjo T – G M

Collar screw. Cutting edge ring. Non-reducing.

Cutting edge ring. Non-reducing.

Part number

Type

Pipe size

6112-06-02 6112-08-04 6112-10-04 6112-12-06 6112-15-08 6112-18-08 6112-22-12 6112-28-16 6112-35-20 6112-42-24

DSVW DSVW DSVW DSVW DSVW DSVW DSVW DSVW DSVW DSVW

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

6612-06-04 6612-08-04 6612-10-06 6612-12-06 6612-14-08 6612-16-08 6612-20-12 6612-25-16 6612-30-20 6612-38-24

DSVW DSVW DSVW DSVW DSVW DSVW DSVW DSVW DSVW DSVW

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

Thread

Part number

Type

G G G G G G G

6116-06-02 6116-08-04 6116-10-04 6116-12-06 6116-15-08 6116-18-08 6116-22-12 6116-28-16 6116-35-20 6116-42-24

WHBT WHBT WHBT WHBT WHBT WHBT WHBT WHBT WHBT WHBT

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

G G G G G G G

6616-06-04 6616-08-04 6616-10-06 6616-12-06 6616-14-08 6616-16-08 6616-20-12 6616-25-16 6616-30-20 6616-38-24

WHBT WHBT WHBT WHBT WHBT WHBT WHBT WHBT WHBT WHBT

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

1/8" 1/4" 1/4" 3/8" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

Pipe size

Thread G G G G G G G

1/8" 1/4" 1/4" 3/8" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G G G G G G G

1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

6114

6128

DSVT – G Banjo T – G M

SWVE – G Banjo T – G M

Collar screw. Cutting edge ring. Non-reducing.

Cutting edge ring. Non-reducing.

Part number

Type

Pipe size

6114-06-02 6114-08-04 6114-10-04 6114-12-06 6114-15-08 6114-18-08 6114-22-12 6114-28-16 6114-35-20 6114-42-24

DSVT DSVT DSVT DSVT DSVT DSVT DSVT DSVT DSVT DSVT

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

6614-06-04 6614-08-04 6614-10-06 6614-12-06 6614-14-08 6614-16-08 6614-20-12 6614-25-16 6614-30-20 6614-38-24

DSVT 6 S DSVT 8 S DSVT 10 S DSVT12 S DSVT 14 S DSVT 16 S DSVT 20 S DSVT 25 S DSVT 30 S DSVT 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

PRODUCT CATALOGUE 2009

Thread

Part number

Type

G G G G G G G

6128-06-02 6128-08-04 6128-10-04 6128-12-06 6128-15-08 6128-22-12

SWVE SWVE SWVE SWVE SWVE SWVE

6 L 8 L 10 L 12 L 15 L 22 L

6 8 10 12 15 22

mm mm mm mm mm mm

G G G G G G

1/8" 1/4" 1/4" 3/8" 1/2" 3/4"

6628-06-04 6628-08-04 6628-10-06 6628-12-06 6628-16-08 6628-20-12

SWVE SWVE SWVE SWVE SWVE SWVE

6 S 8 S 10 S 12 S 16 S 20 S

6 8 10 12 16 20

mm mm mm mm mm mm

G G G G G G

1/4" 1/4" 3/8" 3/8" 1/2" 3/4"

1/8" 1/4" 1/4" 3/8" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G G G G G G G

1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

Pipe size

Thread

261

6


HYDROSCAND Cutting ring fittings

Product group 600 6121

6110-00/03

RHV – G – ED Non-return valve

Seal Ring For 6110 and 6116/6111

Opening pressure 1 Bar. ED sealing

Part number

Type

Size

Part number

Type

6110-00-02 6110-00-04 6110-00-06 6110-00-08 6110-00-12 6110-00-16

Seal Seal Seal Seal Seal Seal

ring ring ring ring ring ring

1/8" 1/4" 3/8" 1/2" 3/4" "

6110-03-10 6110-03-12 6110-03-14 6110-03-16 6110-03-18 6110-03-20 6110-03-22 6110-03-26 6110-03-42 6110-03-48

Seal Seal Seal Seal Seal Seal Seal Seal Seal Seal

ring ring ring ring ring ring ring ring ring ring

M 10 M 12 M 14 M 16 M 18 M 20 M 22 M 26 M 42 - G 1 1/4" M 48 - G 1 1/2"

6121-06-02 6121-08-04 6121-10-04 6121-12-06 6121-15-08 6121-18-08 6121-22-12 6121-28-16 6121-35-20 6121-42-24

RHV RHV RHV RHV RHV RHV RHV RHV RHV RHV

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

6621-06-04 6621-08-04 6621-10-06 6621-12-06 6621-14-08 6621-16-08 6621-20-12 6621-25-16 6621-30-20 6621-38-24

RHV RHV RHV RHV RHV RHV RHV RHV RHV RHV

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

6120 RHD Non-return valve

Pipe size

Opening pressure 1 Bar Part number

Type

6120-06-06 6120-08-08 6120-10-10 6120-12-12 6120-15-15 6120-18-18 6120-22-22 6120-28-28 6120-35-35 6120-42-42

RHD RHD RHD RHD RHD RHD RHD RHD RHD RHD

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

6620-06-06 6620-08-08 6620-10-10 6620-12-12 6620-14-14 6620-16-16 6620-20-20 6620-25-25 6620-30-30 6620-38-38

RHD RHD RHD RHD RHD RHD RHD RHD RHD RHD

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

For more non-return valves, see chapter 5:20.

262

G G G G G G G

1/8" 1/4" 1/4" 3/8" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G G G G G G G

1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

6123

Pipe size

Alternative opening pressures 0.2; 0.5; 2 and 3 Bar are available on request.

Thread

RHZ – G – ED Non-return valve Opening pressure 1 Bar. ED sealing Part number

Type

Pipe size

6123-06-02 6123-08-04 6123-10-04 6123-12-06 6123-15-08 6123-18-08 6123-22-12 6123-28-16 6123-35-20 6123-42-24

RHZ RHZ RHZ RHZ RHZ RHZ RHZ RHZ RHZ RHZ

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

6623-06-04 6623-08-04 6623-10-06 6623-12-06 6623-14-08 6623-16-08 6623-20-12 6623-25-16 6623-30-20 6623-38-24

RHZ RHZ RHZ RHZ RHZ RHZ RHZ RHZ RHZ RHZ

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

Thread G G G G G G G

1/8" 1/4" 1/4" 3/8" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G G G G G G G

1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

PRODUCT CATALOGUE 2009


Product group 600

Part number

Type

6126-04-04 6126-06-06 6126-08-08 6126-12-12 6126-16-16

RHR RHR RHR RHR RHR

HYDROSCAND Cutting ring fittings 6126

6130

RHR Non-return valve

PL Plug

Opening pressure 1 Bar. ED sealing

With O-ring

G G G G

Thread

Part number

Type

1/4" 3/8" 1/2" 3/4" G 1"

6130-00-06 6130-00-08 6130-00-10 6130-00-12 6130-00-15 6130-00-18 6130-00-22 6130-00-28 6130-00-35 6130-00-42

PL PL PL PL PL PL PL PL PL PL

6 L/S 8 L/S 10 L/S 12 L/S 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

6630-00-14 6630-00-16 6630-00-20 6630-00-25 6630-00-30 6630-00-38

PL PL PL PL PL PL

14 16 20 25 30 38

14 16 20 25 30 38

mm mm mm mm mm mm

M M M M M

6127 RHDI Non-return valve Opening pressure 1 Bar. ED sealing Part number

Type

6127-02-02 6127-04-04 6127-06-06 6127-08-08 6127-12-12 6127-16-16 6127-20-20 6127-24-24

RHDI RHDI RHDI RHDI RHDI RHDI RHDI RHDI

Thread G1/8" G1/4" G3/8" G1/2" G3/4" G1" G1 1/4" G1 1/2"

F F F F F F F F

Pipe size

S S S S S S

6131 Adaptor kit For cutting ring fittings for collar 37째 cone

Alternative opening pressures 0.2; 0.5; 2 and 3 Bar are available on request. For more non-return valves, see chapter 5:20.

PRODUCT CATALOGUE 2009

Part number

Type

Pipe size

6131-00-06 6131-00-08 6131-00-10 6131-00-12 6131-00-15 6131-00-18 6131-00-22 6131-00-28 6131-00-35 6131-00-42

HOA HOA HOA HOA HOA HOA HOA HOA HOA HOA

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

6631-00-06 6631-00-08 6631-00-10 6631-00-12 6631-00-14 6631-00-16 6631-00-20 6631-00-25 6631-00-30 6631-00-38

HOA HOA HOA HOA HOA HOA HOA HOA HOA HOA

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

263

6


HYDROSCAND Cutting ring fittings

Product group 600

6149-01

6151

D Cutting ring

FM Pre-installation dies

2-edge, progressive ring Part number

Type

Pipe size

6149-01-06 6149-01-08 6149-01-10 6149-01-12 6149-01-15 6149-01-18 6149-01-22 6149-01-28 6149-01-35 6149-01-42

D D D D D D D D D D

6 L/S 8 L/S 10 L/S 12 L/S 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

6649-01-14 6649-01-16 6649-01-20 6649-01-25 6649-01-30 6649-01-38

D D D D D D

14 16 20 25 30 38

14 16 20 25 30 38

mm mm mm mm mm mm

S S S S S S

6150

Part number

Type

Pipe size

6199-00-09 6199-00-10

FM 6 LL FM 8 LL

6 mm 8 mm

6151-00-06 6151-00-08 6151-00-10 6151-00-12 6151-00-15 6151-00-18 6151-00-22 6151-00-28 6151-00-35 6151-00-42

FM FM FM FM FM FM FM FM FM FM

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

6651-00-06 6651-00-08 6651-00-10 6651-00-12 6651-00-14 6651-00-16 6651-00-20 6651-00-25 6651-00-30 6651-00-38

FM FM FM FM FM FM FM FM FM FM

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

M Nut

Part number

Type

Pipe size

D â&#x20AC;&#x201C; ED B4 Cutting ring and soft seal

Thread

6150-00-06 6150-00-08 6150-00-10 6150-00-12 6150-00-15 6150-00-18 6150-00-22 6150-00-28 6150-00-35 6150-00-42

M M M M M M M M M M

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

M M M M M M M M M M

12 14 16 18 22 26 30 36 45 52

x x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

6650-00-06 6650-00-08 6650-00-10 6650-00-12 6650-00-14 6650-00-16 6650-00-20 6650-00-25 6650-00-30 6650-00-38

M M M M M M M M M M

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

M M M M M M M M M M

14 16 18 20 22 24 30 36 42 52

x x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

264

6152-03

For nut 6150 Part number

Type

Pipe size

6152-03-06 6152-03-08 6152-03-10 6152-03-12 6152-03-15 6152-03-18 6152-03-22 6152-03-28 6152-03-35 6152-03-42

D D D D D D D D D D

-

ED ED ED ED ED ED ED ED ED ED

B4 B4 B4 B4 B4 B4 B4 B4 B4 B4

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

6652-03-06 6652-03-08 6652-03-10 6652-03-12 6652-03-14 6652-03-16 6652-03-20 6652-03-25 6652-03-30 6652-03-38

D D D D D D D D D D

-

ED ED ED ED ED ED ED ED ED ED

B4 B4 B4 B4 B4 B4 B4 B4 B4 B4

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

PRODUCT CATALOGUE 2009


Product group 600

HYDROSCAND Cutting ring fittings

Soft seal cutting ring Cutting ring with two cutting edges and soft seal (6152-03-xx / 6652-03-xx)

Before

6 After

Sealing points 1-2-3-4-5-6

Leak free seal The soft seal cutting ring gives a leak free seal and can be used with all fittings equivalent to DIN 2353. Suitable for assembling under high pressure and in vibrating media. The assembly should be done in the same way as the normal cutting ring and it has six sealing points, as shown in the picture above. The soft seal ring is available in carbon steel and in stainless steel design.

PRODUCT CATALOGUE 2009

265


HYDROSCAND Cutting ring fittings

Product group 600

6153

6160

GM Locking nut

SN Welding nipple with O-ring

For type 6045/6046 Part number

Type

6153-00-12 6153-00-14 6153-00-16 6153-00-18 6153-00-20 6153-00-22 6153-00-24 6153-00-26 6153-00-30 6153-00-36 6153-00-42 6153-00-45 6153-00-52

Locking Locking Locking Locking Locking Locking Locking Locking Locking Locking Locking Locking Locking

Size nut nut nut nut nut nut nut nut nut nut nut nut nut

6 L 8 L/6 S 10 L/8 S 12 L/10 S 12 S 15 L/14 S 16 S 18 S 22 L/20 S 28 L/25 S 30 S 35 S 42 L/38 S

Thread M M M M M M M M M M M M M

12 14 16 18 20 22 24 26 30 36 42 45 52

x x x x x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0 2.0

Part number

Type

6160-06-15 6160-08-15 6160-10-20 6160-12-20 6160-16-20 6160-16-25 6160-16-30 6160-20-25 6160-20-30 6160-20-40 6160-25-30 6160-25-40 6160-30-30 6160-30-40 6160-30-50 6160-38-40 6160-38-50

SN SN SN SN SN SN SN SN SN SN SN SN SN SN SN SN SN

Pipe size

6 8 10 12 16 16 16 20 20 20 25 25 30 30 30 38 38

6 8 10 12 16 16 16 20 20 20 25 25 30 30 30 38 38

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Thickness 1.75 1.50 2.00 2.00 2.00 2.50 3.00 2.50 3.00 4.00 3.00 4.00 3.00 4.00 5.00 4.00 5.00

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

6160-50 O-ring For nut 6160

266

Part number

Type

6160-50-06 6160-50-08 6160-50-10 6160-50-12 6160-50-16 6160-50-20 6160-50-25 6160-50-30 6160-50-38

O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring

Pipe size SN SN SN SN SN SN SN SN SN

6 8 10 12 16 20 25 30 38

6 8 10 12 16 20 25 30 38

mm mm mm mm mm mm mm mm mm

PRODUCT CATALOGUE 2009


HYDROSCAND Adaptors Adaptors Product group 700 Hydroscand can offer a wide range of adaptors (connector nipples) for different purposes such as: – transformation between small and large thread dimensions; – swivel transformation for solid threads; – connecting hoses or pipes with threads in valves, pumps and cylinders; – transformation between different thread systems; – bulkhead connection for hoses; – branching pipes or hoses with T-connections; – sealing off pipes, hoses or thread endings. Our adaptors are normally manufactured in carbon steel of hydraulic quality, i.e. in a crack tested material. The standard surface treatment is E-Coated, which is the name of the surface treatment we use on our fittings. This surface treatment is Cr6-free and is therefore better for both the environment and personal health. Elbow and T-adaptors are normally soldered but some are available in forged design. When dealing with higher pressures, avoid if possible adaptors with R- or NPTF-thread since these are harder to seal and often crack the goods when tightened too excessively. You will find more information about steel pipe adaptors in chapter 6 – Cutting ring fittings and in chapter 7:6 – Flare fittings.

Technical specification – adaptors Material: Steel BS according to 970 230Mo7Pb DIN 1.0718 SIS 1914-04 Surface treatment: E-coated Fe/Zn 8 P1T Temperature range: -40° – +155° C

Hydroscand reserves the right to modify any or all parts of this catalogue without any prior notice.

PRODUCT CATALOGUE 2009

Table of contents

Straight adaptors page

7002 7003 7005 7007 7008 7009 7010 7017 7018 7011 7012 7013 7015 7019 7022 7023 7027 7070 7071 7072 7073 7074 7075 7081 7082 7090 7090-00 7092

Straight adaptor G M – G M Straight adaptor G M – G M Reduction adaptor G M – G F Swivel adaptor G FS – G FS Straight swivel G M – G FS Reduction adaptor G M – G F long Reduction adaptor G M – G F Short Reduction adaptor G M – G F short Reduction adaptor G M – G F long Straight bushing G F – G F Straight adaptor G M – R M Straight adaptor G F – JIC M Straight adaptor G M – SAE O M Straight adaptor G M – M M Straight adaptor G M – NPT M Straight adaptor R M – R M Straight swivel G FS – NPT M Straight adaptor M M – M M Special adaptor for high pressure washer Special adaptor for high pressure washer Special adaptor for high pressure washer Special adaptor for high pressure washer Special adaptor for high pressure washer Banjo – G M Banjo – M M BulkheadG M – G M Lock nut for Bulkhead Choke G M – G M

Elbow adaptors page

7201 7202 7203 7204 7205 7206 7210 7301 7303 7304 7305

Elbow 90° adaptor G M – G FS Elbow 90° adaptor G F – G F Elbow 90° adaptor G M – G FS Adjustable elbow adaptor G M – G M Swivel elbow 90° Bend G M – G FS Swivel elbow 90° Bend G FS – G FS Elbow adaptor 90° G M – R M Swivel elbow 45° G M – G FS Swivel elbow 45° G M – G FS Adjustable elbow G M – G M Swivel elbow 45° G M – G FS

T-Adaptors page

7401 7402 7403 7404 7406 7411 7413 7414

T-Adaptor G M – G M – G M T-Adaptor G FS – G FS – G FS T-Adaptor G M – G M – G FS L-Adaptor G M – G FS – G M T-Adaptor G F – G F – G F T-Adaptor G M – G M – R M Adjustable T-Adaptor G M – G M – G M Adjustable L-Adaptor G M – G M – G M

269 269 269 270 270 271 271 271 271 272 272 272 273 273 273 273 273 274 274 274 274 274 274 274 274 275 275 275

275 275 275 276 276 276 276 276 276 276 276

277 277 277 277 277 277 277 277

The table of contents continues on the next page.

267

7


Table of contents

Adaptors NPT-thread page

7085 7087 7281 7282 7283 7481

Straight bushing NPT M – NPT F Straight adaptor NPT M – NPT M Elbow 90° NPT F – NPT F Elbow 90° NPT M – NPT F Elbow 90° NPT M – NPT M T-adaptor NPT F – F – F

Plugs page

7501 7501-10 7502 7503 7503-50 7504 7505 7506 7510 7510-01 7511-00

Plug G M Plug R M Plug R FS Inset plug G M Inset plug UNF Inset plug M M Plug NPT M Lock G F Plug ROV L M M Plug ROV S M M Plug UNF M

Plug-in fittings page

3C14 3C14 7C14 7C14 7C14 7C14 7C14 7C14 7C14 7C14

268

748 749 810 811 812 823 826 830 831 847

Release ring Assembly stop Plug-in Female M G-threaded Plug Female Plug-in kit Plug male Plug-in Female M SAE-O Plug-in Female M G-threaded Plug-in Female M MM-threaded Packing kit Female

278 278 278 278 278 278

279 279 279 279 279 279 280 280 280 280 280

280 280 281 281 281 281 281 281 281 281

PRODUCT CATALOGUE 2009


Product group 700

HYDROSCAND Adaptors 7002

7003

Straight adaptor GM–GM

Straight adaptor GM–GM

60° cone sealing. DIN 3852, A

Flat face sealing

Part number

Thread 1

7002-02-02 7002-02-04 7002-02-06 7002-02-08 7002-04-04 7002-04-06 7002-04-08 7002-04-12 7002-06-06 7002-06-08 7002-06-10 7002-06-12 7002-06-16 7002-08-08 7002-08-10 7002-08-12 7002-08-16 7002-10-10 7002-10-12 7002-12-12 7002-12-16 7002-12-20 7002-16-16 7002-16-20 7002-16-24 7002-16-32 7002-20-20 7002-20-24 7002-20-32 7002-24-24 7002-24-32 7002-32-32

G G G G G G G G G G G G G G G G G G G G G G

G G G G G

1 1 1 1 1

1/8" M 1/8" M 1/8" M 1/8" M 1/4" M 1/4" M 1/4" M 1/4 "M 3/8" M 3/8" M 3/8" M 3/8" M 3/8" M 1/2" M 1/2" M 1/2" M 1/2" M 5/8" M 5/8" M 3/4" M 3/4" M 3/4" M G 1" M G 1" M G 1" M G 1" M 1/4" M 1/4" M 1/4" M 1/2" M 1/2" M G 2" M

PRODUCT CATALOGUE 2009

x

Thread 2

Part number

Thread 1

G G G G G G G G G G G G

7003-08-08

G 1/2" M

G G G G G G G1 G1 G1 G1 G1 G1

1/8" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 3/4" 3/8" 1/2" 5/8" 3/4" G 1" 1/2" 5/8" 3/4" G 1" 5/8" 3/4" 3/4" G 1" 1/4" G 1" 1/4" 1/2" G 2" 1/4" 1/2" G 2" 1/2" G 2" G 2"

M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M

x

Thread 2 G 1/2" M

7005 Reduction adaptor GM–GF 60° cone sealing Part number

Thread 1

7005-02-02 7005-02-04 7005-04-02 7005-04-04 7005-04-06 7005-06-04 7005-06-06 7005-06-08 7005-08-06 7005-08-08 7005-08-10 7005-08-12 7005-10-08 7005-10-10 7005-10-12 7005-12-08 7005-12-12 7005-12-16 7005-16-12 7005-16-16 7005-16-20 7005-20-16 7005-20-20 7005-20-24 7005-20-32 7005-24-20 7005-24-24 7005-24-32 7005-32-24

G G G G G G G G G G G G G G G G G G

G G G G G G G

1 1 1 1 1 1 1

1/8" 1/8" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 5/8" 5/8" 5/8" 3/4" 3/4" 3/4" G 1" G 1" G 1" 1/4" 1/4" 1/4" 1/4" 1/2" 1/2" 1/2" G 2"

M M M M M M M M M M M M M M M M M M M M M M M M M M M M M

x

Thread 2 G G G G G G G G G G G G G G G G G G G1 G1 G1 G1 G1 G1

1/8" 1/4" 1/8" 1/4" 3/8" 1/4" 3/8" 1/2" 3/8" 1/2" 5/8" 3/4" 1/2" 5/8" 3/4" 1/2" 3/4" G 1" 3/4" G 1" 1/4" G 1" 1/4" 1/2" G 2" 1/4" 1/2" G 2" 1/2"

F F F F F F F F F F F F F F F F F F F F F F F F F F F F F

269

7


HYDROSCAND Adaptors

Part number 7007-02-02 7007-02-04 7007-04-04 7007-04-06 7007-04-08 7007-06-06 7007-06-08 7007-08-08 7007-08-10 7007-08-12 7007-10-10 7007-10-12 7007-12-12 7007-12-16 7007-16-16 7007-20-20 7007-24-24 7007-32-32

270

Thread 1 G G G G G G G G G G G G G G

1/8" 1/8" 1/4" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS

Product group 700

7007

7008

Swivel adaptor G FS – G FS

Straight swivel G M – G FS

x

Thread 2 G G G G G G G G G G G G G

1/8" 1/4" 1/4" 3/8" 1/2" 3/8" 1/2" 1/2" 5/8" 3/4" 5/8" 3/4" 3/4" G 1" G 1" G 1 1/4" G 1 1/2" G 2"

FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS

Part number

Thread 1

7008-02-02 7008-02-04 7008-04-02 7008-04-04 7008-04-06 7008-04-08 7008-06-04 7008-06-06 7008-06-08 7008-06-10 7008-08-04 7008-08-06 7008-08-08 7008-08-10 7008-08-12 7008-10-08 7008-10-10 7008-10-12 7008-12-06 7008-12-08 7008-12-10 7008-12-12 7008-12-16 7008-16-08 7008-16-12 7008-16-16 7008-16-20 7008-20-16 7008-20-20 7008-20-24 7008-24-20 7008-24-24 7008-24-32 7008-32-32

G G G G G G G G G G G G G G G G G G G G G G G

G G G G G G

1 1 1 1 1 1

1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" 5/8" 5/8" 5/8" 3/4" 3/4" 3/4" 3/4" 3/4" G 1" G 1" G 1" G 1" 1/4" 1/4" 1/4" 1/2" 1/2" 1/2" G 2"

M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M

x

Thread 2 G G G G G G G G G G G G G G G G G G G G G G G G G1 G G G G

1 1 1 1

1/8" 1/4" 1/8" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 5/8" 1/4" 3/8" 1/2" 5/8" 3/4" 1/2" 5/8" 3/4" 3/8" 1/2" 5/8" 3/4" G 1" 1/2" 3/4" G 1" 1/4" G 1" 1/4" 1/2" 1/4" 1/2" G 2" G 2"

FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS FS

PRODUCT CATALOGUE 2009


Product group 700

HYDROSCAND Adaptors 7017

7009

Reduction adaptor G M – G F short

Reduction adaptor G M – G F long Part number

Thread 1

7009-02-04 7009-02-06 7009-04-02 7009-04-06 7009-04-08 7009-04-12 7009-06-04 7009-06-08 7009-06-12 7009-08-06 7009-08-12 7009-08-16 7009-08-20 7009-12-08 7009-12-16 7009-12-20 7009-12-24 7009-16-12 7009-16-20 7009-16-24 7009-20-16 7009-20-24 7009-24-20

G G G G G G G G G G G G G G G G G

1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4" G 1" G 1" G 1" G 1 1/4" G 1 1/4" G 1 1/2"

x

M M M M M M M M M M M M M M M M M M M M M M M

Thread 2

Part number

G G G G G G G G G G G

7017-06-02 7017-08-02 7017-08-04 7017-12-04 7017-12-06 7017-16-04 7017-16-06 7017-16-08 7017-20-08 7017-20-12 7017-24-08 7017-24-12 7017-24-16

G1 G G1 G1 G G1 G1 G1 G1

1/4" 3/8" 1/8" 3/8" 1/2" 3/4" 1/4" 1/2" 3/4" 3/8" 3/4" G 1" 1/4" 1/2" G 1" 1/4" 1/2" 3/4" 1/4" 1/2" G 1" 1/2" 1/4"

F F F F F F F F F F F F F F F F F F F F F F F

7010 Reduction adaptor G M – G F Short Part number

Thread 1

7010-06-02 7010-08-02 7010-08-04 7010-12-04 7010-12-06 7010-12-08 7010-16-04 7010-16-06 7010-16-08 7010-20-08 7010-20-12 7010-24-08 7010-24-12 7010-24-16 7010-32-08 7010-32-20

G G G G G G

G G G G G

1 1 1 1 1

3/8" 1/2" 1/2" 3/4" 3/4" 3/4" G 1" G 1" G 1" 1/4" 1/4" 1/2" 1/2" 1/2" G 2" G 2"

PRODUCT CATALOGUE 2009

M M M M M M M M M M M M M M M M

x

ED sealing

Thread 2 G G G G G G G G G G G G G

1/8" 1/8" 1/4" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 1/2" 3/4" 1/2" 3/4" G 1" G 1/2" G 1 1/4"

F F F F F F F F F F F F F F F F

Thread 1 G G G G G

G G G G G

1 1 1 1 1

3/8" 1/2" 1/2" 3/4" 3/4" G 1" G 1" G 1" 1/4" 1/4" 1/2" 1/2" 1/2"

M M M M M M M M M M M M M

x

ED ED ED ED ED ED ED ED ED ED ED ED ED

Thread 2 G G G G G G G G G G G G

1/8" 1/8" 1/4" 1/4" 3/8" 1/4" 3/8" 1/2" 1/2" 3/4" 1/2" 3/4" G 1"

F F F F F F F F F F F F F

7018 Reduction adaptor G M – G F long ED sealing Part number 7018-02-04 7018-02-06 7018-04-02 7018-04-06 7018-04-08 7018-04-12 7018-06-04 7018-06-08 7018-06-12 7018-08-06 7018-08-12 7018-08-16 7018-08-20 7018-12-08 7018-12-16 7018-12-20 7018-12-24 7018-16-12 7018-16-20 7018-16-24 7018-20-16 7018-20-24 7018-24-20

Thread 1 G G G G G G G G G G G G G G G G G

1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4" G 1" G 1" G 1" G 1 1/4" G 1 1/4" G 1 1/2"

M M M M M M M M M M M M M M M M M M M M M M M

ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED

x

Thread 2 G G G G G G G G G G G G1 G G1 G1 G G1 G1 G1 G1

1/4" 3/8" 1/8" 3/8" 1/2" 3/4" 1/4" 1/2" 3/4" 3/8" 3/4" G 1" 1/4" 1/2" G 1" 1/4" 1/2" 3/4" 1/4" 1/2" G 1" 1/2" 1/4"

F F F F F F F F F F F F F F F F F F F F F F F

271

7


HYDROSCAND Adaptors

Part number

Thread 1

7011-02-02 7011-02-04 7011-02-06 7011-04-04 7011-04-06 7011-04-08 7011-06-06 7011-06-08 7011-06-12 7011-08-08 7011-08-10 7011-08-12 7011-08-16 7011-10-10 7011-10-12 7011-12-12 7011-12-16 7011-16-16 7011-16-20 7011-20-20 7011-20-24 7011-24-24 7011-24-32 7011-32-32

G G G G G G G G G G G G G G G G G G G G G

1 1 1 1

1/8" 1/8" 1/8" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" G 1" G 1" 1/4" 1/4" 1/2" 1/2" G 2"

Product group 700

7011

7013

Straight bushing GF–GF

Straight adaptor G F – JIC M

x

F F F F F F F F F F F F F F F F F F F F F F F F

Thread 2

Part number

Thread 1

G G G G G G G G G G G G

7013-02-07 7013-04-07 7013-04-08 7013-04-09 7013-04-12 7013-06-07 7013-06-08 7013-06-09 7013-06-12 7013-06-14 7013-08-07 7013-08-08 7013-08-09 7013-08-12 7013-08-14 7013-08-17 7013-08-19 7013-10-12 7013-10-14 7013-10-17 7013-10-21 7013-12-12 7013-12-14 7013-12-17 7013-12-19 7013-12-21 7013-16-14 7013-16-17 7013-16-19 7013-16-21 7013-16-26 7013-20-26 7013-24-26 7013-24-30 7013-32-40

G G G G G G G G G G G G G G G G G G G G G G G G G G

G G G G G G G

1 1 1 1

1/8" 1/4" 3/8" 1/4" 3/8" 1/2" 3/8" 1/2" 3/4" 1/2" 5/8" 3/4" G 1" 5/8" 3/4" 3/4" G 1" G 1" 1/4" 1/4" 1/2" 1/2" G 2" G 2"

F F F F F F F F F F F F F F F F F F F F F F F F

7012 Straight adaptor GM–RM Part number

Thread 1

7012-02-02 7012-02-04 7012-04-02 7012-04-04 7012-04-06 7012-04-08 7012-06-04 7012-06-06 7012-06-08 7012-06-12 7012-08-06 7012-08-08 7012-08-10 7012-08-12 7012-10-10 7012-12-04 7012-12-06 7012-12-08 7012-12-12 7012-12-16 7012-16-12 7012-16-16 7012-16-20 7012-20-12 7012-20-20 7012-24-24 7012-32-32

G G G G G G G G G G G G G G G G G G G G

272

1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 5/8" 3/4" 3/4" 3/4" 3/4" 3/4" G 1" G 1" G 1" G 1 1/4" G 1 1/4" G 1 1/2" G 2"

M M M M M M M M M M M M M M M M M M M M M M M M M M M

x

Thread 2 R R R R R R R R R R R R R R R R R R R R R1 R R1 R1

1/8" 1/4" 1/8" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 3/4" 3/8" 1/2" 5/8" 3/4" 5/8" 1/4" 3/8" 1/2" 3/4" R 1" 3/4" R 1" 1/4" 3/4" 1/4" 1/2" R2"

M M M M M M M M M M M M M M M M M M M M M M M M M M M

1/8" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 5/8" 5/8" 5/8" 5/8" 3/4" 3/4" 3/4" 3/4" 3/4" G 1" G 1" G 1" G 1" G 1" G 1 1/4" G 1 1/2" G 1 1/2" G 2"

M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M

x

Thread 2 JIC 7/16" JIC 7/16" JIC 1/2" JIC 9/16" JIC 3/4" JIC 7/16" JIC 1/2" JIC 9/16" JIC 3/4" JIC 7/8" JIC 7/16" JIC 1/2" JIC 9/16" JIC 3/4" JIC 7/8" JIC 1 1/16" JIC 1 3/16" JIC 3/4" JIC 7/8" JIC 1 1/16" JIC 1 5/16" JIC 3/4" JIC 7/8" JIC 1 1/16" JIC 1 3/16" JIC 1 5/16" JIC 7/8" JIC 1 1/16" JIC 1 3/16" JIC 1 5/16" JIC 1 5/8" JIC 1 5/8" JIC 1 5/8" JIC 1 7/8" JIC 2 1/2"

M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M

PRODUCT CATALOGUE 2009


Product group 700

HYDROSCAND Adaptors

Part number

Thread 1

7015-04-07 7015-04-08 7015-04-09 7015-04-12 7015-06-09 7015-06-12 7015-08-12 7015-08-14 7015-08-17 7015-08-21 7015-10-14 7015-10-17 7015-12-17 7015-12-19 7015-12-21 7015-16-19 7015-16-21 7015-16-26

G G G G G G G G G G G G G G G

1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" 3/4" G 1" G 1" G 1"

7015

7022

Straight adaptor G M – SAE O M

Straight adaptor G M – NPT M

x

M M M M M M M M M M M M M M M M M M

Thread 2 SAE 7/16" SAE 1/2" SAE 9/16" SAE 3/4" SAE 9/16" SAE 3/4" SAE 3/4" SAE 7/8" SAE 1 1/16" SAE 1 5/16" SAE 7/8" SAE 1 1/16" SAE 1 1/16" SAE 1 3/16" SAE 1 5/16" SAE 1 3/16" SAE 1 5/16" SAE 1 5/8"

M M M M M M M M M M M M M M M M M M

7019 Straight adaptor GM–MM Part number

Thread 1

7019-02-10 7019-02-12 7019-04-10 7019-04-12 7019-04-14 7019-04-16 7019-04-18 7019-06-12 7019-06-14 7019-06-16 7019-06-18 7019-06-20 7019-06-22 7019-08-16 7019-08-18 7019-08-20 7019-08-22 7019-08-26 7019-10-26 7019-12-18 7019-12-22 7019-12-26 7019-12-30 7019-16-22 7019-16-33

G G G G G G G G G G G G G G G G G G G G G G G

1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" 5/8" 3/4" 3/4" 3/4" 3/4" G 1" G 1"

PRODUCT CATALOGUE 2009

M M M M M M M M M M M M M M M M M M M M M M M M M

x

Thread 2 M M M M M M M M M M M M M M M M M M M M M M M M M

10 12 10 12 14 16 18 12 14 16 18 20 22 16 18 20 22 26 26 18 22 26 30 22 33

x x x x x x x x x x x x x x x x x x x x x x x x x

1.0 1.5 1.0 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.0

M M M M M M M M M M M M M M M M M M M M M M M M M

Part number

Thread 1

7022-02-02 7022-04-02 7022-04-04 7022-04-06 7022-04-08 7022-06-04 7022-06-06 7022-06-08 7022-06-12 7022-08-06 7022-08-08 7022-08-12 7022-08-16 7022-10-08 7022-12-04 7022-12-06 7022-12-08 7022-12-12 7022-12-16 7022-16-08 7022-16-12 7022-16-16 7022-16-20 7022-16-24 7022-20-20 7022-24-16 7022-24-24 7022-32-24 7022-32-32

G G G G G G G G G G G G G G G G G G G

1/8" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 5/8" 3/4" 3/4" 3/4" 3/4" 3/4" G 1" G 1" G 1" G 1" G 1" G 1 1/4" G 1 1/2" G 1 1/2" G 2" G 2"

M M M M M M M M M M M M M M M M M M M M M M M M M M M M M

x

1 1 1 1 1

Thread 2

1/8"-27 1/8"-27 1/4"-18 3/8"-18 1/2"-14 1/4"-18 3/8"-18 1/2"-14 3/4"-14 3/8"-18 1/2"-14 3/4"-14 1"-11½ 1/2"-14 1/4"-18 3/8"-18 1/2"-14 3/4"-14 1"-11½ 1/2"-14 3/4"-14 1"-11½ 1/4"-11½ 1/2"-11½ 1/4"-11½ 1"-11½ 1/2"-11½ 1/2"-11½ 2"-11½

NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT

M M M M M M M M M M M M M M M M M M M M M M M M M M M M M

7023 Straight adaptor RM–RM Part number

Thread 1

7023-04-04 7023-06-06 7023-08-08 7023-16-16

R 1/4" M R 3/8" M R 1/2" M R 1" M

x

Thread 2 R 1/4" M R 3/8" M R 1/2" M R 1" M

7027 Straight swivel G FS – NPT M Part number 7027-02-04 7027-04-02 7027-04-04 7027-06-06 7027-08-08

Thread 1 G G G G G

1/8" 1/4" 1/4" 3/8" 1/2"

FS FS FS FS FS

x

Thread 2 1/4"-18 1/8"-27 1/4"-18 3/8"-18 1/2"-14

NPT NPT NPT NPT NPT

M M M M M

273

7


HYDROSCAND Adaptors

Part number 7070-10-10 7070-10-12 7070-12-12 7070-12-14 7070-12-16 7070-14-14 7070-14-16 7070-14-18 7070-16-16 7070-16-18 7070-16-22 7070-18-18 7070-18-20 7070-18-22 7070-18-26 7070-22-22 7070-22-30 7070-26-26 7070-30-30

Thread 1 M M M M M M M M M M M M M M M M M M M

10 10 12 12 12 14 14 14 16 16 16 18 18 18 18 22 22 26 30

x x x x x x x x x x x x x x x x x x x

1.0 1.0 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5

Product group 700

7070

7074

Straight adaptor MM–MM

Special adaptor for high pressure washer

x

M M M M M M M M M M M M M M M M M M M

Thread 2 M M M M M M M M M M M M M M M M M M M

10 12 12 14 16 14 16 18 16 18 22 18 20 22 26 22 30 26 30

x x x x x x x x x x x x x x x x x x x

1.0 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5

M M M M M M M M M M M M M M M M M M M

Part number

Thread 1

7074-22-22

M 22 x 1.5 M

x

Thread 2

M 22 x 1.5 M HPW

7075 Special adaptor for high pressure washer Part number

Thread 1

7075-22-04 7075-22-06

M 22 x 1.5 M M 22 x 1.5 M

x

Thread 2 G 1/4" M HPW G 3/8" M HPW

7071

7081

Special adaptor for high pressure washer Part number

Thread 1

7071-22-04 7071-22-06

M 22 x 1.5 FS M 22 x 1.5 FS

x

Thread 2

Part number

Type

G 1/4" M HPW G 3/8" M HPW

7081-04-04 7081-06-04 7081-06-06 7081-08-06 7081-08-08 7081-12-08 7081-12-12

Banjo Banjo Banjo Banjo Banjo Banjo Banjo

7072 Special adaptor for high pressure washer Part number

Thread 1

7072-22-04 7072-22-06

M 22 x 1.5 FS M 22 x 1.5 FS

7082-14-14 7082-18-18

Banjo Banjo

x

G G G G G G G

1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4"

M M M M M M M

Banjo – M M

Special adaptor for high pressure washer

M 22 x 1.5 M M 22 x 1.5 M

1/4" 3/8" 3/8" 1/2" 1/2" 3/4" 3/4"

Thread

7082

Type

7073-22-04 7073-22-06

G G G G G G G

Thread 2

Part number

Thread 1

For bolt

G 1/4" F HPW G 3/8" F HPW

7073

Part number

274

x

Banjo – G M

For bolt

Thread

M14 M18

M 14 x 1.5 M M 18 x 1.5 M

Thread 2 G 1/4" F HPW G 3/8" F HPW

PRODUCT CATALOGUE 2009


Product group 700

HYDROSCAND Adaptors

7090

7201

Bulkhead GM–GM

Elbow 90°adaptor G M – G FS

Part number

Thread 1

Type

Thread 2

Part number

Thread 1

Type

7090-04-04 7090-04-06 7090-06-06 7090-08-06 7090-08-08 7090-10-10 7090-12-12 7090-16-16 7090-20-20 7090-24-24 7090-32-32

G G G G G G G

Bulkhead Bulkhead Bulkhead Bulkhead Bulkhead Bulkhead Bulkhead Bulkhead Bulkhead Bulkhead Bulkhead

G G G G G G G

7201-02-02 7201-04-04 7201-06-06 7201-08-08 7201-10-10 7201-12-12 7201-16-16 7201-20-20 7201-24-24 7201-32-32

G G G G G G

90° 90° 90° 90° 90° 90° 90° 90° 90° 90°

1/4" 1/4" 3/8" 1/2" 1/2" 5/8" 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

M M M M M M M M M M M

1/4" 3/8" 3/8" 3/8" 1/2" 5/8" 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

M M M M M M M M M M M

1/8" 1/4" 3/8" 1/2" 5/8" 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

M M M M M M M M M M

To

7090-00-04 7090-00-06 7090-00-08 7090-00-10 7090-00-12 7090-00-16 7090-00-20

Lock Lock Lock Lock Lock Lock Lock

7090-04-04 7090-06-06 7090-08-08 7090-10-10 7090-12-12 7090-16-16 7090-20-20

nut nut nut nut nut nut nut

Thread G G G G G

1/4" 3/8" 1/2" 5/8" 3/4" G 1" G 1 1/4"

M M M M M M M

1/8" 1/4" 3/8" 1/2" 5/8" 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

FS FS FS FS FS FS FS FS FS FS

Elbow 90° adaptor GF–GF

Lock nut for Bulkhead

Type

G G G G G G

7202

7090-00

Part number

Thread 2

Part number

Thread 1

Type

Thread 2

7202-02-02 7202-04-04 7202-06-06 7202-08-08 7202-12-12 7202-16-16

G G G G G

90° 90° 90° 90° 90° 90°

G G G G G

1/8" 1/4" 3/8" 1/2" 3/4" G 1"

F F F F F F

1/8" 1/4" 3/8" 1/2" 3/4" G 1"

F F F F F F

7 7203

7092

Elbow 90° adapt0r G M – G FS

Choke G M – G M Own drilling Part number

Thread 1

7092-02-02 7092-04-04 7090-04-06 7092-06-06 7092-06-08 7092-08-08 7092-08-12 7092-12-12

G G G G G G G G

1/8" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4"

PRODUCT CATALOGUE 2009

M M M M M M M M

x

Thread 2 G G G G G G G G

1/8" 1/4" 1/4" 3/8" 1/2" 1/2" 3/4" 3/4"

M M M M M M M M

choke choke choke choke choke choke choke choke

Forged Part number

Thread 1

Type

7203-02-02 7203-04-04 7203-06-06 7203-08-08 7203-12-12 7203-16-16 7203-20-20

G G G G G

90° 90° 90° 90° 90° 90° 90°

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4"

M M M M M M M

Thread 2

Forged G Forged G Forged G Forged G Forged G Forged Forged G 1

1/8" 1/4" 3/8" 1/2" 3/4" G 1" 1/4"

FS FS FS FS FS FS FS

275


HYDROSCAND Adaptors

Product group 700

7204

7301

Adjustable elbow adaptor GM–GM

Swivel elbow 45° G M – G FS

Part number

Thread 1

Type

7204-04-04 7204-06-06 7204-08-08 7204-12-12 7204-16-16 7204-20-20

G G G G

90° 90° 90° 90° 90° 90°

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4"

M M M M M M

Thread 2 G G G G

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4"

M M M M M M

Adj Adj Adj Adj Adj Adj

Part number

Thread 1

Type

7301-04-04 7301-06-06 7301-08-08 7301-12-12 7301-16-16 7301-20-20

G G G G

45° 45° 45° 45° 45° 45°

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4"

M M M M M M

Type

7205-02-02 7205-04-04 7205-06-06 7205-08-08 7205-12-12 7205-16-16 7205-20-20 7205-24-24

G G G G G

90° 90° 90° 90° 90° 90° 90° 90°

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

M M M M M M M M

Part number

Thread 1

7206-04-04 7206-06-06 7206-08-08 7206-16-16 7206-24-24

G 1/4" FS G 3/8" FS G 1/2" FS G 1" FS G 1 1/2" FS

Thread 2 G G G G G

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

FS FS FS FS FS FS FS FS

Part number

Thread 1

Type

7303-04-04 7303-06-06 7303-08-08 7303-12-12 7303-16-16

G G G G

45° 45° 45° 45° 45°

1/4" 3/8" 1/2" 3/4" G 1"

M M M M M

G G G G

1/4" 3/8" 1/2" 3/4" G 1"

FS FS FS FS FS

7206

7304

Swivel elbow 90° Bend G FS – G FS

Adjustable elbow GM–GM

Type 90° 90° 90° 90° 90°

Thread 2

Part number

Thread 1

Type

G 1/4" FS G 3/8" FS G 1/2" FS G 1" FS G 1 1/2" FS

7304-04-04 7304-06-06 7304-08-08 7304-12-12 7304-16-16

G G G G

45° 45° 45° 45° 45°

1/4" 3/8" 1/2" 3/4" G 1"

M M M M M

Thread 2 G G G G

1/4" 3/8" 1/2" 3/4" G 1"

M M M M M

Adj Adj Adj Adj Adj

7210

7305

Elbow adaptor 90° GM–RM

Swivel elbow 45° G M – G FS

Type

Thread 2

Part number

Thread 1

Type

7210-02-02 7210-04-04 7210-06-06 7210-06-08 7210-08-08 7210-12-12 7210-16-16

G G G G G G

90° 90° 90° 90° 90° 90° 90°

R R R R R R

7305-04-04 7305-06-06 7305-08-08 7305-10-10 7305-12-12 7305-16-16

G G G G G

45° 45° 45° 45° 45° 45°

276

Thread 2

Forged Forged Forged Forged Forged

Thread 1 M M M M M M M

FS FS FS FS FS FS

Forged

Part number

1/8" 1/4" 3/8" 3/8" 1/2" 3/4" G 1"

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4"

Swivel elbow 45° G M – G FS

Swivel elbow 90° Bend G M – G FS Thread 1

G G G G

7303

7205

Part number

Thread 2

1/8" 1/4" 3/8" 1/2" 1/2" 3/4" R 1"

M M M M M M M

1/4" 3/8" 1/2" 5/8" 3/4" G 1"

M M M M M M

Thread 2 G G G G G

1/4" 3/8" 1/2" 5/8" 3/4" G 1"

FS FS FS FS FS FS

PRODUCT CATALOGUE 2009


Product group 700

Part number

Thread 1

7401-04-04 G 7401-06-06 G 7401-08-08 G 7401-12-12 G 7401-16-16 7401-20-20 G 1 7401-24-24 G 1

Part number

1/4" 3/8" 1/2" 3/4" G 1" 1/4"

7403-04-04 G 7403-06-06 G 7403-08-08 G 7403-12-12 G 7403-16-16 7403-20-20 G 1 7403-24-24 G 1

Part number

1/4" 3/8" 1/2" 3/4" G 1" 1/4" 1/2"

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

1/4" 3/8" 1/2" 3/4" G 1" 1/4" 1/2"

7406

T-Adaptor GM–GM–GM

T-Adaptor GF–GF–GF

M M M M M M M

M M M M M M M

7406-02-02 G 7406-04-04 G 7406-06-06 G 7406-08-08 G 7406-12-12 G 7406-16-16 7406-20-20 G 1

1/8" 1/4" 3/8" 1/2" 3/4" G 1" 1/4"

F F F F F F F

x Thread 2 G G G G G

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4"

F F F F F F F

x Thread 3 G G G G G

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4"

F F F F F F F

T-Adaptor GM–GM–RM

FS FS FS FS FS FS

G G G G

G G G G

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4"

FS FS FS FS FS FS

Part number

Thread 1

7411-04-04 7411-06-06 7411-08-08 7411-12-12 7411-16-16

G G G G

1/4" 3/8" 1/2" 3/4" G 1"

M M M M M

x Thread 2 G G G G

1/4" 3/8" 1/2" 3/4" G 1"

M M M M M

x Thread 3 R R R R

1/4" 3/8" 1/2" 3/4" R 1"

M M M M M

7413

T-Adaptor G M – G M – G FS

Adjustable T-Adaptor GM–GM–GM

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

M M M M M M M

x Thread 3 G G G G

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

FS FS FS FS FS FS FS

Part number

Thread 1

7413-04-04 7413-06-06 7413-08-08 7413-12-12 7413-16-16

G G G G

1/4" 3/8" 1/2" 3/4" G 1"

M M M M M

x Thread 2 G G G G

1/4" 3/8" 1/2" 3/4" G 1"

M M M M M

x Thread 3 G G G G

1/4" 3/8" 1/2" 3/4" G 1"

M M M M M

7404

7414

L-Adaptor G M – G FS – G M

Adjustable L-Adaptor GM–GM–GM

x Thread 2 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

x Thread 3

7403

x Thread 2

PRODUCT CATALOGUE 2009

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

Thread 1

T-Adaptor G FS – G FS – G FS

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4"

G G G G

G G G G

Part number

7411

G G G G

M M M M M M M

x Thread 3

7402

x Thread 2

M M M M M M M

Thread 1

7404-04-04 G 7404-06-06 G 7404-08-08 G 7404-12-12 G 7404-16-16 7404-20-20 G 1 7404-24-24 G 1

G G G G

FS FS FS FS FS FS

Thread 1

7401

x Thread 2

M M M M M M M

Thread 1

7402-04-04 G 7402-06-06 G 7402-08-08 G 7402-12-12 G 7402-16-16 7402-20-20 G 1

Part number

1/4" 3/8" 1/2" 3/4" G 1" 1/4" 1/2"

HYDROSCAND Adaptors

FS FS FS FS FS FS FS

x Thread 3 G G G G

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

M M M M M M M

Part number

Thread 1

7414-04-04 7414-06-06 7414-08-08 7414-12-12 7414-16-16

G G G G

1/4" 3/8" 1/2" 3/4" G 1"

M M M M M

x Thread 2 G G G G

1/4" 3/8" 1/2" 3/4" G 1"

M M M M M

x Thread 3 G G G G

1/4" 3/8" 1/2" 3/4" G1"

M M M M M

277

7


HYDROSCAND Adaptors

Part number 7085-02-04 7085-04-04 7085-04-06 7085-08-08 7085-12-12 7085-12-16 7085-20-20

Thread 1 NPT NPT NPT NPT NPTF NPT NPTF 1

1/8" 1/4" 1/4" 1/2" 3/4" 3/4" 1/4"

Product group 700

7085

7281

Straight bushing NPT M – NPT F

Elbow 90° NPT F – NPT F

x

F F F F F F F

Thread 2 NPT 1/8" NPT 1/4" NPTF 3/8" NPT 1/2" NPTF 3/4" NPT 1" NPTF 1 1/4"

F F F F F F F

Part number

Thread 1

7281-02-02 7281-04-04 7281-16-16

NPT 1/8" F NPT 1/4" F NPT 1" F

Type 90° 90° 90°

Part number 7087-02-02 7087-02-04 7087-04-04 7087-04-06 7087-04-08 7087-06-06 7087-06-08 7087-08-08 7087-08-12 7087-12-12 7087-12-16 7087-16-16 7087-20-20 7087-24-24 7087-32-32

Thread 1 NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/4" NPT 1/4" NPT 3/8" NPT 3/8" NPT 1/2" NPT 3/4" NPT 3/4" NPT 1" NPT 1" NPT 1 1/4" NPT 1 1/2" NPT 2"

M M M M M M M M M M M M M M M

x

Thread 2 NPT 1/8" NPT 1/4" NPT 1/4" NPT 3/8" NPT 1/2" NPT 3/8" NPT 1/2" NPT 1/2" NPT 1/2" NPT 3/4" NPT 3/4" NPT 1" NPT 1 1/4" NPT 1 1/2" NPT 2"

M M M M M M M M M M M M M M M

NPT 1/8" F NPT 1/4" F NPT 1" F

7282 Elbow 90° NPT M – NPT F

7087 Straight adaptor NPT M – NPT M

Thread 2

Part number 7282-02-02 7282-02-04 7282-04-04 7282-06-04 7282-06-06 7282-06-08 7282-08-06 7282-08-08 7282-12-08 7282-12-12

Thread 1 NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT

1/8" 1/8" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 3/4" 3/4"

M M M M M M M M M M

Type

Thread 2

90° 90° 90° 90° 90° 90° 90° 90° 90° 90°

NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT

1/8" 1/4" 1/4" 1/4" 3/8" 1/2" 3/8" 1/2" 1/2" 3/4"

F F F F F F F F F F

7283 Elbow 90° NPT M – NPT M Part number 7283-04-04 7283-06-08 7283-08-08 7283-08-12 7283-12-16 7283-16-16

Thread 1 NPT 1/4" NPT 3/8" NPT 1/2" NPT 1/2" NPT 1" NPT 1"

M M M M M M

Type

Thread 2

90° 90° 90° 90° 90° 90°

NPT 1/4" NPT 1/2" NPT 1/2" NPT 3/4" NPT 1" NPT 1"

M M M M M M

7481 T-adaptor NPT F – F – F Part number 7481-02-02 7481-06-06 7481-08-08 7481-12-12

278

Thread 1 NPT NPT NPT NPT

1/8" 3/8" 1/2" 3/4"

F F F F

x Thread 2 NPT NPT NPT NPT

1/8" 3/8" 1/2" 3/4"

F F F F

x Thread 3 NPT NPT NPT NPT

1/8" 3/8" 1/2" 3/4"

F F F F

PRODUCT CATALOGUE 2009


Product group 700

Part number

Type

7501-00-02 7501-00-04 7501-00-06 7501-00-08 7501-00-10 7501-00-12 7501-00-16 7501-00-20 7501-00-24 7501-00-32

Plug Plug Plug Plug Plug Plug Plug Plug Plug Plug

Part number

Type

7501-10-02 7501-10-04 7501-10-06 7501-10-08 7501-10-12 7501-10-16 7501-10-20 7501-10-24 7501-10-32

Plug Plug Plug Plug Plug Plug Plug Plug Plug

HYDROSCAND Adaptors

7501

7503

Plug G M

Inset plug G M

Thread G G G G G G

1/8" 1/4" 3/8" 1/2" 5/8" 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

M M M M M M M M M M

Part number

Type

7503-00-02 7503-00-04 7503-00-06 7503-00-08 7503-00-12 7503-00-16 7503-00-20 7503-00-24

Inset Inset Inset Inset Inset Inset Inset Inset

Thread plug plug plug plug plug plug plug plug

G G G G G

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

M M M M M M M M

7501-10

7503-50

Plug R M

Inset plug UNF

Thread R R R R R

1/8" 1/4" 3/8" 1/2" 3/4" R 1" R 1 1/4" R 1 1/2" R 2"

M M M M M M M M M

Part number

Type

7503-50-06 7503-50-07 7503-50-08 7503-50-09 7503-50-12 7503-50-14 7503-50-17 7503-50-21 7503-50-26

Inset Inset Inset Inset Inset Inset Inset Inset Inset

Thread plug plug plug plug plug plug plug plug plug

3/8"-24 7/16"-20 1/2"-20 9/16"-18 3/4"-16 7/8"-14 1 1/16"-12 1 5/16"-12 1 5/8"-12

UNF UNF UNF UNF UNF UNF UNF UNF UNF

7

Part number

Type

7502-00-02 7502-00-04 7502-00-06 7502-00-08 7502-00-12 7502-00-16 7502-00-20 7502-00-24

Plug Plug Plug Plug Plug Plug Plug Plug

PRODUCT CATALOGUE 2009

7502

7504

Plug R FS

Inset plug M M

Thread G G G G G

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

FS FS FS FS FS FS FS FS

Part number

Type

7504-00-10 7504-00-12 7504-00-14 7504-00-16 7504-00-18 7504-00-20 7504-00-22 7504-00-26 7504-00-27 7504-00-33 7504-00-42

Inset Inset Inset Inset Inset Inset Inset Inset Inset Inset Inset

Thread plug plug plug plug plug plug plug plug plug plug plug

M M M M M M M M M M M

10 12 14 16 18 20 22 26 27 33 42

x x x x x x x x x x x

1.0 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0

M M M M M M M M M M M

279


HYDROSCAND Adaptors

Product group 700

7510-01

7505

Plug ROV S M M

Plug NPT M

Part number

Type

7505-00-02 7505-00-04 7505-00-06 7505-00-08 7505-00-12 7505-00-16 7505-00-20 7505-00-24

Plug Plug Plug Plug Plug Plug Plug Plug

Thread 1/8"-27 1/4"-18 3/8"-18 1/2"-14 3/4"-14 1"-11½ 1 1/4"-11½ 1 1/2"-11½

NPT NPT NPT NPT NPT NPT NPT NPT

M M M M M M M M

DIN 3861 Part number

Type

7510-01-06 7510-01-08 7510-01-10 7510-01-12 7510-01-14 7510-01-16 7510-01-20 7510-01-25 7510-01-30 7510-01-38

ROV ROV ROV ROV ROV ROV ROV ROV ROV ROV

Thread 6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

M M M M M M M M M M

14 16 18 20 22 24 30 36 42 52

x x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

M M M M M M M M M M

7511-00 Plug UNF M

7506 Lock G F

Part number

Type

7506-00-02 7506-00-04 7506-00-06 7506-00-08 7506-00-10 7506-00-12 7506-00-16 7506-00-20 7506-00-24

Lock Lock Lock Lock Lock Lock Lock Lock Lock

Thread G G G G G G

1/8" 1/4" 3/8" 1/2" 5/8" 3/4" G 1" G 1 1/4" G 1 1/2"

IF IF IF IF IF IF IF IF IF

Part number

Type

Thread

7511-00-07 7511-00-09 7511-00-12 7511-00-17 7511-00-21 7511-00-26 7511-00-30

Plug Plug Plug Plug Plug Plug Plug

7/16" - 20 UNF 9/16" - 18 UNF 3/4" - 16 UNF 1 1/16" - 12 UN 1 5/16" - 12 UN 1 5/16" - 12 UN 1 7/8" - 12 UN

3C14 748 Release ring Product group 300

7510 Plug ROV L M M DIN 3861 Part number

Type

7510-00-06 7510-00-08 7510-00-10 7510-00-12 7510-00-15 7510-00-18 7510-00-22 7510-00-28 7510-00-35 7510-00-42

ROV ROV ROV ROV ROV ROV ROV ROV ROV ROV

280

Part number

Description

3C147480400 3C147480600 3C147480800 3C147481200 3C147481600

1/4” 3/8” 1/2” 3/4” 1”

Release Release Release Release Release

No./Package ring ring ring ring ring

10 10 10 10 10

Thread 6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

M M M M M M M M M M

12 14 16 18 22 26 30 36 45 52

x x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

M M M M M M M M M M

3C14 749 Assembly stop Product group 300 Part number

Description

3C147490400 3C147490600 3C147490800 3C147491200 3C147491600

1/4” 3/8” 1/2” 3/4” 1”

Assembly Assembly Assembly Assembly Assembly

No./Package stop stop stop stop stop

10 10 10 10 10

PRODUCT CATALOGUE 2009


Product group 700

Part number

Type

7C14 7C14 7C14 7C14 7C14

Plug-in Plug-in Plug-in Plug-in Plug-in

810 810 810 810 810

0404 0606 0808 1212 1616

HYDROSCAND Adaptors

7C14 810

7C14 826

Plug-in Female M G-threaded

Plug-in Female M SAE-O

female female female female female

Size

Thread

Part number

Type

1/4" 3/8" 1/2" 3/4" 1"

G G G G G

7C14 7C14 7C14 7C14 7C14 7C14 7C14

Plug-in Plug-in Plug-in Plug-in Plug-in Plug-in Plug-in

1/4" 3/8" 1/2" 3/4" 1"

826 826 826 826 826 826 826

0407 0609 0812 0814 0817 1217 1621

female female female female female female female

Size

Thread

1/4" 3/8" 1/2" 1/2" 1/2" 3/4" 1"

7/16-20 9/16-18 3/4-16 7/8-14 1 1/16-12 1 1/16-12 1 5/16-12

7C14 830

7C14 811

Plug-in Female M G-threaded

Plug Female

Built-in rubber sealing Part number

Type

7C14 7C14 7C14 7C14 7C14

Plug Plug Plug Plug Plug

811 811 811 811 811

0400 0600 0800 1200 1600

Thread

female female female female female

1/4" 3/8" 1/2" 3/4" 1"

Part number

Type

7C14 830 0404 Plug-in female 7C14 830 0606 Plug-in female 7C14 830 0808 Plug-in female

Size

Thread

1/4" 3/8" 1/2"

G 1/4" G 3/8" G 1/2"

7C14 831

7C14 812

Plug-in Female M MM-threaded

Plug-in kit

ISO 6149-3 Part number

Type

7C14 7C14 7C14 7C14

Plug-in Plug-in Plug-in Plug-in

812 812 812 812

0422 0624 0827 1236

Size kit kit kit kit

1/4" 3/8" 1/2" 3/4"

Thread M M M M

22 24 27 36

x x x x

1.5 1.5 1.5 1.5

Part number

Type

7C14 7C14 7C14 7C14 7C14

Plug-in Plug-in Plug-in Plug-in Plug-in

831 831 831 831 831

0612 0616 0818 1222 1227

Size female female female female female

7C14 7C14 7C14 7C14 7C14

Plug Plug Plug Plug Plug

723 723 723 723 723

0400 0600 0800 1200 1600

male male male male male

PRODUCT CATALOGUE 2009

Thread 1/4" 3/8" 1/2" 3/4" 1"

12 16 18 22 27

x x x x x

1.5 1.5 1.5 1.5 2.0

Packing kit Female

Plug male

Type

M M M M M

7C14 847

7C14 823

Part number

3/8" 3/8" 1/2" 3/4" 3/4"

Thread

O-ring and support ring Part number

Type

7C14 7C14 7C14 7C14 7C14

Packing Packing Packing Packing Packing

847 847 847 847 847

0400 0600 0800 1200 1600

Size kit kit kit kit kit

female female female female female

1/4" 3/8" 1/2" 3/4" 1"

281

7


HYDROSCAND Flare fittings Flare fittings

Table of contents

Product group 760 Steel flare fittings give a tight and safe system, even in very demanding installations. The systems consists of three parts: adaptor, nut and clamping sleeve. Together, they connect a pipe flared to 74°. They are called JIC/SAE 37° and are equivalent to SAE J514/ISO 8434-2. The sealing is achieved when the flared pipe end is pressed between two conical surfaces: the adaptor and the clamping sleeve. The clamping sleeve works as a plate to prevent the nut from cutting into the pipe and also as a pipe support. It prevents the pipe from rotating during tightening of the nut, and automatically steers the flared pipe into the right position in relation to the adaptor. The fitting can be dismantled and reassembled many times without being damaged. By simply changing the clamping sleeve, the very same fitting can be used for either metrical or inch pipes. The flare fittings are always delivered with a cover to protect the threads from getting damaged and keep them free from contaminations.

Pipe Clamping sleeve

Nut

Adaptor

Flare fittings page

7601 7602 7603 7604 7605 7605-00 7606 7607 7611 7609 7610 7613 7614 7615 7620 7622 7623 7624 7625 7630 7632 7633 7640 7641 7642 7644 7645 7650 7651 7658 7660 7659 7661 7662 7663 7664 7666 7669 7667 7670 7680 7681 7690 7691 7692 7693

J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J

G Straight joint fitting 286 W Elbow joint fitting 286 T T-joint fitting 286 K Cross joint fitting 286 SV Straight bulkhead 286 LN Locknut 287 WSV 90° elbow bulkhead 287 USV45° elbow bulkhead 287 GE Straight fitting – NPTF-thread 287 TSV T-joint fitting, bulkhead 287 LSV L-joint fitting, bulkhead 287 GE Straight fitting – G-thread 288 GE Straight fitting – UNF-thread 288 GE Straight fitting – M-thread 289 WE elbow fitting – NPTF-thread 289 WE Adjustable fitting – G-thread 289 WE Adjustable fitting – UNF-thread 289 WE Adjustable fitting – M-thread 290 WE Long Adjustable fitting – UNF-thread 290 UE 45° Elbow fitting –NPTF-thread 290 UE Adjustable 45° Elbow fitting – G-thread 290 UE Adjustable 45° Elbow fitting – UNF-thread 290 TE T-fitting – NPTF-thread 290 TE Adjustable T-fitting – G-thread 291 TE Adjustable T-fitting – UNF-thread 291 LE Adjustable L-fitting – G-thread 291 LE Adjustable L-fitting – UNF-thread 291 GAI Straight fitting – NPTF-thread 291 GAI Straight fitting – G-thread 291 GI Straight adaptor with JIC 37° 292 EVW 90° Elbow fitting with JIC 37° 292 GII Straight adaptor with JIC 37° 292 EVU 45° Elbow fitting with JIC 37° 292 EVT T-fitting with JIC 37° 292 EVL L-fitting with JIC 37° 292 EVGE Adaptor with JIC 37° NPTF-thread 293 EVGE Adaptor with JIC 37° G-thread 293 EVGE Adaptor with JIC 37° M-thread 293 EVGE Adaptor with JIC 37° UNF-thread 293 KOR Reduction 293 MAV Manometer fitting 294 MA Measurement connection 294 PLI Blind nut 294 PLU Plug 294 M Nut 294 D Clamping sleeve 294

Hydroscand reserves the right to modify any or all parts of this catalogue without any prior notice.

PRODUCT CATALOGUE 2009

283

7:6


Hydroscand Flare fittings

product group 760

Order codes Part numbers

Types

The part number consists of two parts.

J G

=

Straight joint fitting

The first four numbers show the Type (e.g. 7601 = J G, 7602 = J W).

J W

=

Elbow joint fitting

J T

=

T-joint fitting

The four last numbers show the thread size in 16-parts inches or the metric thread dimensions are shown directly (e.g. 7611-07-02 where 07 means 7/16" and 02 means 1/8").

J K

=

Cross joint fitting

J SV

=

Bulkhead

Pipe dimension

UN-thread

Part no.

J WSV =

Elbow bulkhead

J GE

=

Straight fitting male threaded

J WE

=

90°-elbow fitting male threaded

J UE

=

45°-elbow fitting male threaded

J TE

=

T-fitting male threaded

J LE

=

L-fitting male threaded

J GAI

=

Straight fitting female threaded

J GI

=

Straight adaptor with JIC 37° swivel nut

=

Straight adaptor with JIC 37° swivel nut x 2

6

7/16–20

07

8

1/2–20

08

10

9/16–18

09

12

3/4–16

12

J GII

J EVW =

90°-elbow fitting with JIC 37° swivel nut

J EVU =

45°-elbow fitting with JIC 37° swivel nut

J EVT

=

T-fitting with JIC 37° swivel nut

J EVL

=

L-fitting with JIC 37° swivel nut

14|15|16

7/8–14

14

18|20

1 1/16–12

17

22

1 3/16–12

19

25

1 5/16–12

21

J EVGE =

Straight fitting with JIC 37° swivel nut

J KOR =

Reducing

J MAV =

Manometer fitting

J MA

=

Measurement connection

J PLI

=

Blind nut

J PLU

=

Plug

J M

=

Nut

J D

=

Clamping sleeve

J

=

JIC

J LN

=

Locknut

30|32

1 5/8–12

26

38

1 7/8–12

30

50

2 1/2–12

40

J USV =

45°-elbow bulkhead

J TSV

=

T-fitting bulkhead

J LSV

=

L-fitting bulkhead

Pressure ratings FLARE FITTINGS, MPa Equivalent to SAEJ1065 Safety factor: 4:1 JIC 37°

UN O-ring

Pipe

284

Not adjustable

G (BSP) O-ring + support ring

Adjustable

Thread

Not adjustable

Adjustable

M (BSP) O-ring + Washer Thread

Not adjustable

Adjustable

6

35

31.5

31.5

G 1/8"

31.5

20.0

10 x 1.0

31.5

20

8

35

31.5

31.5

G 1/4"

31.5

20.0

12 x 1.5

31.5

20

10

25

31.5

25.0

G 3/8"

31.5

20.0

14 x 1.5

31.5

20

12

25

31.5

25.0

G 1/2"

25.0

20.0

16 x 1.5

31.5

20

16

25

20.0

20.0

G 5/8"

25.0

20.0

22 x 1.5

25.0

20

20

20

25.0

20.0

G 3/4"

25.0

20.0

27 x 1.5

25.0

20

25

20

16.0

20.0

G 1"

25.0

20.0

33 x 2.0

25.0

20

32

16

12.5

16.0

G 1 1/4"

16.0

16.0

42 x 2.0

16.0

16

38

10

16.0

12.5

G1 1/2"

16.0

16.0

48 x 2.0

16.0

16

50

8

12.5

10.0

G 2"

12.5

10.0

60 x 2.0

12.5

10

PRODUCT CATALOGUE 2009


Product group 760

Hydroscand Flare fittings

Assembly instructions Pipes Use seamless, cold-drawn and normalised precision steel pipes to get the best result of bending and flaring (DIN 2391 C). Make sure the pipes do not have any internal scratches.

Flanging 1. Cut the tube perpendicularly and deburr it both internally and externally. Make sure the pipe is of the correct dimension (inch/mm); of the right quality; and has no damages. 2. Apply the nut and then the clamping sleeve onto the tube end. The open threaded part of the nut should be faced towards the tube end. Flare the tube with a flaring tool in order to create a flare of 37°. 3. The largest flare diameter (D) should be as large as the outer diameter of the clamping sleeve. The smallest flare diameter (D) should be as small as the largest inner diameter of the clamping sleeve. See also the table to the right. If the flare is too small, the whole surface of the fitting cannot be used and the flare is then stretched thinner because of the smaller surface. Pipes with a flare too large can get stuck in the threads of the nut during assembly.

Flaring diameters Flanging Pipe mm

O.D. inch

d (min)

D (max)

6

1/4"

8.0

9.7

8

5/16"

9.5

11.3

10

3/8"

11.2

12.7

12

1/2"

14.9

17.3

14

17.9

20.2

15

17.9

20.2

17.9

20.2

16

5/8"

18

22.3

24.7

20

3/4"

22.3

24.7

25

1"

28.7

31.0

35.8

38.9

30 32

1 1/4"

35.8

38.9

38

1 1/2"

41.4

45.3

Clamping sleeve external diameter

Clamping sleeve internal diameter

øD

ød

To achieve a perfect fit, the flare must be perpendicular and concentric with the pipe and the clamping sleeve. If the flare is inclined or excentric, the tube was angle-cut and unequally shaped during the flaring. Cracks might appear when the wrong pipe quality or too hard materials have been used. This can also be the result of internal scratches. A correct flaring ensures a long operation period without interference even during hard working conditions.

Assembling Fasten the pipe flare between clamping sleeve and fitting flare by manually tightening the nut to metal contact. Then follow the FFWR as shown in the tightening torque to the right. Flare fittings are easy to dismantle and reassemble several times; and they always gives a solid and safe enclosure.

Assembly towards pipe

Tightening torque Pipe dim.

Thread 6

FFWR hose

FFWR pipe

7/16" – 20 UNF

2

2

8

1/2" – 20 UNF

2

2

10

9/16" – 18 UNF

2

1 1/2

12

3/4" – 16 UNF

2

1 1/2

14, 15, 16

7/8" – 14 UNF

1 1/2

1 1/2

18, 20

1.1/16" – 12 UN

1

1 1/4

25

1.5/16" – 12 UN

1

1

30, 32

1.5/8" – 12 UN

1

1

38

1.7/8" – 12 UN

1

1

50

2.1/2" – 12 UN

1

1

FFWR Flats From Wrench Resistance

Metal contact between the cones, always use an appropriate wrench. Assembly on svivel nut

PRODUCT CATALOGUE 2009

285

7:6


Hydroscand Flare fittings

Part number Type 7601-07-07 7601-07-08 7601-07-09 7601-08-08 7601-08-09 7601-08-12 7601-08-14 7601-09-09 7601-09-12 7601-09-14 7601-09-17 7601-12-12 7601-12-14 7601-12-17 7601-14-14 7601-14-17 7601-14-21 7601-17-17 7601-17-19 7601-17-21 7601-17-26 7601-19-19 7601-19-21 7601-21-21 7601-21-26 7601-26-26 7601-26-30 7601-30-30 7601-40-40

J J J J J J J J J J J J J J J J J J J J J J J J J J J J J

7601

7603

JG Straight joint fitting

JT T-joint fitting

Pipe dim.1 (mm) Pipe dim.2 (mm)

G G G G G G G G G G G G G G G G G G G G G G G G G G G G G

6 6 6 8 8 8 8 10 10 10 10 12 12 12 14|15|16 14|15|16 14|15|16 18|20 18|20 18|20 18|20 22 22 25 25 30|32 30|32 38 50

Part number

Type

7602-07-07 7602-08-08 7602-09-09 7602-12-12 7602-14-14 7602-17-17 7602-19-19 7602-21-21 7602-26-26 7602-30-30

J J J J J J J J J J

286

product group 760

W W W W W W W W W W

6 8 10 8 10 12 14|15|16 10 12 14|15|16 18|20 12 14|15|16 18|20 14|15|16 18|20 25 18|20 22 25 30|32 22 25 25 30|32 30|32 38 38 50

Part number

Type

7603-07-07 7603-08-08 7603-09-09 7603-12-12 7603-14-14 7603-17-17 7603-19-19 7603-21-21 7603-26-26 7603-30-30

J J J J J J J J J J

T T T T T T T T T T

Pipe dim. (mm) 6 8 10 12 14|15|16 18|20 22 25 30|32 38

7604 JK Cross joint fitting Part number

Type

7604-07-07 7604-09-09 7604-12-12 7604-14-14 7604-17-17 7604-21-21

J J J J J J

K K K K K K

Pipe dim. (mm) 6 10 12 14|15|16 18|20 25

7602

7605

JW Elbow joint fitting

J SV Straight bulkhead

Pipe dim. (mm)

Part number

Type

6 8 10 12 14|15|16 18|20 22 25 30|32 38

7605-07-07 7605-08-08 7605-09-09 7605-12-12 7605-14-14 7605-17-17 7605-21-21 7605-26-26 7605-30-30 7605-40-40

J J J J J J J J J J

SV SV SV SV SV SV SV SV SV SV

Pipe dim. (mm) 6 8 10 12 14|15|16 18|20 25 30|32 38 50

PRODUCT CATALOGUE 2009


Product group 760

Part number

Type

7605-00-07 7605-00-08 7605-00-09 7605-00-12 7605-00-14 7605-00-17 7605-00-21 7605-00-26 7605-00-30 7605-00-40

J J J J J J J J J J

LN LN LN LN LN LN LN LN LN LN

Hydroscand Flare fittings

7605-00

7609

J LN Locknut

J TSV T-joint fitting, bulkhead

Pipe dim. (mm)

Part number

Type

6 8 10 12 14|15|16 18|20 25 30|32 38 50

7609-07-07 7609-08-08 7609-09-09 7609-12-12 7609-14-14 7609-17-17 7609-21-21 7609-26-26 7609-30-30

J J J J J J J J J

Pipe dim. (mm)

TSV TSV TSV TSV TSV TSV TSV TSV TSV

6 8 10 12 14|15|16 18|20 25 30|32 38

7610 J LSV L-joint fitting, bulkhead

7606 J WSV 90° elbow bulkhead Part number

Type

7606-07-07 7606-08-08 7606-09-09 7606-12-12 7606-14-14 7606-17-17 7606-21-21 7606-26-26 7606-30-30

J J J J J J J J J

WSV WSV WSV WSV WSV WSV WSV WSV WSV

Pipe dim. (mm) 6 8 10 12 14|15|16 18|20 25 30|32 38

7607 J USV 45° elbow bulkhead Part number

Type

7607-07-07 7607-08-08 7607-09-09 7607-12-12 7607-14-14 7607-17-17 7607-21-21

J J J J J J J

USV USV USV USV USV USV USV

PRODUCT CATALOGUE 2009

Pipe dim. (mm) 6 8 10 12 14|15|16 18|20 25

Part number

Type

7610-07-07 7610-09-09 7610-12-12 7610-14-14

J J J J

Pipe dim. (mm)

LSV LSV LSV LSV

6 10 12 14|15|16

7611 J GE Straight fitting – NPTF-thread Part number

Type

7611-07-02 7611-07-04 7611-07-06 7611-07-08 7611-08-02 7611-08-04 7611-08-06 7611-09-02 7611-09-04 7611-09-06 7611-09-08 7611-12-04 7611-12-06 7611-12-08 7611-12-12 7611-14-06 7611-14-08 7611-14-12 7611-17-08 7611-17-12 7611-17-16 7611-21-08 7611-21-12 7611-21-16 7611-21-20 7611-26-16 7611-26-20 7611-30-20 7611-30-24 7611-40-32

J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J

GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE

Pipe dim. (mm) 6 6 6 6 8 8 8 10 10 10 10 12 12 12 12 14|15|16 14|15|16 14|15|16 18|20 18|20 18|20 25 25 25 25 30|32 30|32 38 38 50

Thread

1 1 1 1

1/8"-27 1/4"-18 3/8"-18 1/2"-14 1/8"-27 1/4"-18 3/8"-18 1/8"-27 1/4"-18 3/8"-18 1/2"-14 1/4"-18 3/8"-18 1/2"-14 3/4"-14 3/8"-18 1/2"-14 3/4"-14 1/2"-14 3/4"-14 1"-11½ 1/2"-14 3/4"-14 1"-11½ 1/4"-11½ 1"-11½ 1/4"-11½ 1/4"-11½ 1/2"-11½ 2"-11½

NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF

287

7:6


Hydroscand Flare fittings

product group 760 7613

7614

J GE Straight fitting – G-thread

J GE Straight fitting – UNF-thread

With O-ring and washer

With O-ring

Part number Type Pipe dim. (mm) 7613-07-02 7613-07-04 7613-07-06 7613-07-08 7613-08-02 7613-08-04 7613-08-06 7613-09-02 7613-09-04 7613-09-06 7613-09-08 7613-12-04 7613-12-06 7613-12-08 7613-12-12 7613-14-06 7613-14-08 7613-14-12 7613-17-06 7613-17-08 7613-17-12 7613-17-16 7613-19-12 7613-21-08 7613-21-12 7613-21-16 7613-21-20 7613-21-24 7613-26-16 7613-26-20 7613-26-24 7613-30-16 7613-30-20 7613-30-24

288

J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J

GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE

6 6 6 6 8 8 8 10 10 10 10 12 12 12 12 14|15|16 14|15|16 14|15|16 18|20 18|20 18|20 18|20 22 25 25 25 25 25 30|32 30|32 30|32 38 38 38

G G G G G G G G G G G G G G G G G G G G G G G G G1 G1 G1 G1 G1 G1

Thread

Part number Type Pipe dim. (mm)

1/8" 1/4" 3/8" 1/2" 1/8" 1/4" 3/8" 1/8" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 3/4" 3/8" 1/2" 3/4" 3/8" 1/2" 3/4" G 1" 3/4" 1/2" 3/4" G 1" 1/4" 1/2" G 1" 1/4" 1/2" G 1" 1/4" 1/2"

7614-07-07 7614-07-08 7614-07-09 7614-07-12 7614-08-08 7614-09-07 7614-09-09 7614-09-12 7614-09-14 7614-12-08 7614-12-09 7614-12-12 7614-12-14 7614-12-17 7614-12-21 7614-14-12 7614-14-14 7614-14-17 7614-14-21 7614-17-12 7614-17-14 7614-17-17 7614-17-19 7614-17-21 7614-19-19 7614-21-14 7614-21-17 7614-21-21 7614-21-26 7614-26-21 7614-26-26 7614-26-30 7614-30-26 7614-30-30 7614-40-30

M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M

J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J

GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE

6 6 6 6 8 10 10 10 10 12 12 12 12 12 12 14|15|16 14|15|16 14|15|16 14|15|16 18|20 18|20 18|20 18|20 18|20 22 25 25 25 25 30|32 30|32 30|32 38 38 50

Thread 7/16"-20 1/2"-20 9/16"-18 3/4"-16 1/2"-20 7/16"-20 9/16"-18 3/4"-16 7/8"-14 1/2"-20 9/16"-18 3/4"-16 7/8"-14 1 1/16"-12 1 5/16"-12 3/4"-16 7/8"-14 1 1/16"-12 1 5/16"-12 3/4"-16 7/8"-14 1 1/16"-12 1 3/16"-12 1 5/16"-12 1 3/16"-12 7/8"-14 1 1/16"-12 1 5/16"-12 1 5/8"-12 1 5/16"-12 1 5/8"-12 1 7/8"-12 1 5/8"-12 1 7/8"-12 1 7/8"-12

UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF

PRODUCT CATALOGUE 2009


Product group 760

Hydroscand Flare fittings 7615

7622

J GE Straight fitting – M-thread

J WE Adjustable fitting – G-thread

With O-ring and washer

With O-ring and washer

Part number Type Pipe dim. (mm) 7615-07-10 7615-07-12 7615-07-14 7615-08-12 7615-08-14 7615-09-14 7615-09-16 7615-12-14 7615-12-16 7615-12-18 7615-12-22 7615-12-26 7615-14-16 7615-14-18 7615-14-22 7615-17-18 7615-17-22 7615-17-26 7615-17-27 7615-21-22 7615-21-33 7615-26-42

J J J J J J J J J J J J J J J J J J J J J J

GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE

6 6 6 8 8 10 10 12 12 12 12 12 14|15|16 14|15|16 14|15|16 18|20 18|20 18|20 18|20 25 25 30|32

Thread M M M M M M M M M M M M M M M M M M M M M M

10 12 14 12 14 14 16 14 16 18 22 26 16 18 22 18 22 26 27 22 33 42

x x x x x x x x x x x x x x x x x x x x x x

1.0 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.0 1.5 2.0 2.0

Part number Type Pipe dim. (mm) 7622-07-02 7622-07-04 7622-08-04 7622-09-04 7622-09-06 7622-09-08 7622-12-04 7622-12-06 7622-12-08 7622-12-12 7622-14-06 7622-14-08 7622-14-12 7622-17-08 7622-17-12 7622-17-16 7622-21-12 7622-21-16 7622-21-20 7622-26-16 7622-26-20 7622-30-20 7622-30-24

J J J J J J J J J J J J J J J J J J J J J J J

WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE

7620-07-02 7620-07-04 7620-07-06 7620-07-08 7620-08-02 7620-08-04 7620-09-02 7620-09-04 7620-09-06 7620-09-08 7620-12-04 7620-12-06 7620-12-08 7620-12-12 7620-12-16 7620-14-06 7620-14-08 7620-14-12 7620-17-08 7620-17-12 7620-17-16 7620-21-12 7620-21-16 7620-26-16 7620-26-20 7620-30-24

J J J J J J J J J J J J J J J J J J J J J J J J J J

WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE

6 1/8"-27 6 1/4"-18 6 3/8"-18 6 1/2"-14 8 1/8"-27 8 1/4"-18 10 1/8"-27 10 1/4"-18 10 3/8"-18 10 1/2"-14 12 1/4"-18 12 3/8"-18 12 1/2"-14 12 3/4"-14 12 1"-11½ 14|15|16 3/8"-18 14|15|16 1/2"-14 14|15|16 3/4"-14 18|20 1/2"-14 18|20 3/4"-14 18|20 1"-11½ 25 3/4"-14 25 1"-11½ 30|32 1"-11½ 30|32 1 1/4"-11½ 38 1 1/2"-11½

PRODUCT CATALOGUE 2009

NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF

G G1 G1 G1 G1

1/8" 1/4" 1/4" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 3/4" 3/8" 1/2" 3/4" 1/2" 3/4" G 1" 3/4" G 1" 1/4" G 1" 1/4" 1/4" 1/2"

M M M M M M M M M M M M M M M M M M M M M M M

J WE Adjustable fitting – UNF-thread

J WE elbow fitting – NPTF-thread Thread

G G G G G G G G G G G G G G G

7623

7620

Part number Type Pipe dim. (mm)

6 6 8 10 10 10 12 12 12 12 14|15|16 14|15|16 14|15|16 18|20 18|20 18|20 25 25 25 30|32 30|32 38 38

Thread

With O-ring Part number Type Pipe dim. (mm) 7623-07-07 7623-07-08 7623-07-09 7623-08-08 7623-09-09 7623-09-12 7623-12-09 7623-12-12 7623-12-14 7623-12-17 7623-14-12 7623-14-14 7623-14-17 7623-17-12 7623-17-14 7623-17-17 7623-17-21 7623-21-14 7623-21-17 7623-21-21 7623-26-26 7623-30-30

J J J J J J J J J J J J J J J J J J J J J J

WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE

6 6 6 8 10 10 12 12 12 12 14|15|16 14|15|16 14|15|16 18|20 18|20 18|20 18|20 25 25 25 30|32 38

Thread 7/16"-20 1/2"-20 9/16"-18 1/2"-20 9/16"-18 3/4"-16 9/16"-18 3/4"-16 7/8"-14 1 1/16"-12 3/4"-16 7/8"-14 1 1/16"-12 3/4"-16 7/8"-14 1 1/16"-12 1 5/16"-12 7/8"-14 1 1/16"-12 1 5/16"-12 1 5/8"-12 1 7/8"-12

UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF

289

7:6


Hydroscand Flare fittings 7624

7632

J WE Adjustable fitting – M-thread

J UE Adjustable 45° Elbow fitting – G-thread

With O-ring and washer. DIN 3852 P.1

With O-ring and washer

Part number Type Pipe dim. (mm) 7624-07-10 7624-08-12 7624-09-14 7624-12-14 7624-12-16 7624-12-18 7624-14-18 7624-14-20 7624-14-22 7624-14-26 7624-17-22 7624-17-27 7624-21-33 7624-26-42

J J J J J J J J J J J J J J

product group 760

WE WE WE WE WE WE WE WE WE WE WE WE WE WE

Thread

6 8 10 12 12 12 14|15|16 14|15|16 14|15|16 14|15|16 18|20 18|20 25 30|32

M M M M M M M M M M M M M M

10 12 14 14 16 18 18 20 22 26 22 27 33 42

x x x x x x x x x x x x x x

1.0 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0

7625

Part number Type Pipe dim. (mm) 7632-07-02 7632-07-04 7632-08-04 7632-09-04 7632-09-06 7632-12-06 7632-12-08 7632-14-06 7632-14-08 7632-14-12 7632-17-08 7632-17-12 7632-17-16 7632-21-16 7632-21-20 7632-30-24

J J J J J J J J J J J J J J J J

UE UE UE UE UE UE UE UE UE UE UE UE UE UE UE UE

J WE Long Adjustable fitting – UNF-thread

Part number Type 7625-07-07 7625-09-09 7625-12-12 7625-21-21

J J J J

WE WE WE WE

290

M M M M M M M M M M M M M M M M

7633

Pipe dim. (mm)

Thread

With O-ring

6 10 12 25

7/16" 9/16" 3/4" 1 5/16"

Long Long Long Long

Part number Type Pipe dim. (mm) UE UE UE UE UE UE UE UE UE UE UE UE UE UE UE UE UE UE UE

1/8" 1/4" 1/4" 1/4" 3/8" 3/8" 1/2" 3/8" 1/2" 3/4" 1/2" 3/4" G 1" G 1" G 1 1/4" G 1 1/2"

J UE Adjustable 45° Elbow fitting – UNF-thread

J UE 45° Elbow fitting – NPTF-thread

J J J J J J J J J J J J J J J J J J J

G G G G G G G G G G G G

With O-ring

7630

7630-07-02 7630-07-04 7630-07-06 7630-08-02 7630-09-04 7630-09-06 7630-09-08 7630-12-04 7630-12-06 7630-12-08 7630-14-08 7630-14-12 7630-17-08 7630-17-12 7630-17-16 7630-21-12 7630-21-16 7630-26-20 7630-30-24

6 6 8 10 10 12 12 14|15|16 14|15|16 14|15|16 18|20 18|20 18|20 25 25 38

Thread

Thread

6 1/8"-27 6 1/4"-18 6 3/8"-18 8 1/8"-27 10 1/4"-18 10 3/8"-18 10 1/2"-14 12 1/4"-18 12 3/8"-18 12 1/2"-14 14|15|16 1/2"-14 14|15|16 3/4"-14 18|20 1/2"-14 18|20 3/4"-14 18|20 1"-11½ 25 3/4"-14 25 1"-11½ 30|32 1 1/4"-11½ 38 1 1/2"-11½

NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF

Part number Type Pipe dim. (mm) 7633-07-07 7633-07-09 7633-08-08 7633-09-09 7633-12-09 7633-12-12 7633-14-12 7633-14-14 7633-14-17 7633-17-17 7633-17-21 7633-21-17 7633-21-26 7633-26-26 7633-30-30

J J J J J J J J J J J J J J J

UE UE UE UE UE UE UE UE UE UE UE UE UE UE UE

6 6 8 10 12 12 14|15|16 14|15|16 14|15|16 18|20 18|20 25 25 30|32 38

Thread 7/16"-20 9/16"-18 1/2"-20 9/16"-18 9/16"-18 3/4"-16 3/4"-16 7/8"-14 1 1/16"-12 1 1/16"-12 1 5/16"-12 1 1/16"-12 1 5/8"-12 1 5/8"-12 1 7/8"-12

UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF

7640 J TE T-fitting – NPTF-thread Part number Type Pipe dim. (mm) 7640-07-04 7640-09-04 7640-12-08 7640-17-12 7640-21-16

J J J J J

TE TE TE TE TE

Thread

6 1/4"-18 10 1/4"-18 12 1/2"-14 18|20 3/4"-14 25 1"-11 1/2

NPTF NPTF NPTF NPTF NPTF

PRODUCT CATALOGUE 2009


Product group 760

Hydroscand Flare fittings 7641

7645

J TE Adjustable T-fitting – G-thread

J LE Adjustable L-fitting – UNF-thread

With O-ring and washer

With O-ring

Part number Type Pipe dim. (mm) 7641-07-02 7641-07-04 7641-08-02 7641-09-04 7641-09-06 7641-12-06 7641-12-08 7641-14-08 7641-17-12 7641-17-16 7641-21-16 7641-26-20 7641-30-24

J J J J J J J J J J J J J

TE TE TE TE TE TE TE TE TE TE TE TE TE

6 6 8 10 10 12 12 14|15|16 18|20 18|20 25 30|32 38

Thread G G G G G G G G G

1/8" 1/4" 1/8" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" G 1" G 1" G 1 1/4" G 1 1/2"

M M M M M M M M M M M M M

Part number Type Pipe dim. (mm) 7645-07-07 7645-07-09 7645-08-08 7645-09-09 7645-12-12 7645-14-14 7645-17-17 7645-21-21

J J J J J J J J

LE LE LE LE LE LE LE LE

With O-ring Part number Type Pipe dim. (mm) 7642-07-07 7642-08-08 7642-09-09 7642-12-12 7642-14-14 7642-17-17 7642-21-21

J J J J J J J

TE TE TE TE TE TE TE

Thread

6 7/16"-20 8 1/2"-20 10 9/16"-18 12 3/4"-16 14|15|16 7/8"-14 18|20 1 1/16"-12 25 1 5/16"-12

UNF UNF UNF UNF UNF UNF UNF

6 7/16"-20 6 9/16"-20 8 1/2"-20 10 9/16"-20 12 3/4"-20 14|15|16 7/8"-20 18|20 1 1/16"-20 25 1 5/16"-20

UNF UNF UNF UNF UNF UNF UNF UNF

7650 J GAI Straight fitting – NPTF-thread

7642 J TE Adjustable T-fitting – UNF-thread

Thread

Part number Type Pipe dim. (mm) 7650-07-02 7650-07-04 7650-08-02 7650-08-04 7650-09-04 7650-09-06 7650-12-06 7650-14-08 7650-17-08 7650-17-12 7650-21-16

J J J J J J J J J J J

GAI GAI GAI GAI GAI GAI GAI GAI GAI GAI GAI

6 6 8 8 10 10 12 14|15|16 18|20 18|20 25

Thread 1/8"-27 1/4"-18 1/8"-27 1/4"-18 1/4"-18 3/8"-18 3/8"-18 1/2"-14 1/2"-14 3/4"-14 1"-11½

NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF

7651 7644

J GAI Straight fitting – G-thread

J LE Adjustable L-fitting – G-thread With O-ring and washer Part number Type Pipe dim. (mm) 7644-07-02 7644-07-04 7644-08-02 7644-08-04 7644-09-04 7644-09-06 7644-12-06 7644-12-08 7644-14-08 7644-14-12 7644-17-12 7644-21-16 7644-26-20 7644-30-24

J J J J J J J J J J J J J J

LE LE LE LE LE LE LE LE LE LE LE LE LE LE

PRODUCT CATALOGUE 2009

6 6 8 8 10 10 12 12 14|15|16 14|15|16 18|20 25 30|32 38

Thread G G G G G G G G G G G

1/8" 1/4" 1/8" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" 3/4" G 1" G 1 1/4" G 1 1/2"

M M M M M M M M M M M M M M

Part number Type Pipe dim. (mm) 7651-07-02 7651-07-04 7651-08-02 7651-08-04 7651-09-04 7651-09-06 7651-09-08 7651-12-06 7651-12-08 7651-14-08 7651-17-08 7651-17-12 7651-21-16 7651-26-16 7651-26-20 7651-30-24

J J J J J J J J J J J J J J J J

GAI GAI GAI GAI GAI GAI GAI GAI GAI GAI GAI GAI GAI GAI GAI GAI

6 6 8 8 10 10 10 12 12 14|15|16 18|20 18|20 25 30|32 30|32 38

Thread G G G G G G G G G G G G

1/8" 1/4" 1/8" 1/4" 1/4" 3/8" 1/2" 3/8" 1/2" 1/2" 1/2" 3/4" G 1" G 1" G 1 1/4" G 1 1/2"

F F F F F F F F F F F F F F F F

291

7:6


Hydroscand Flare fittings

Part number Type 7658-07-07 7658-08-09 7658-09-09 7658-12-09 7658-12-12 7658-14-14 7658-17-17 7658-19-19 7658-21-21 7658-26-26 7658-40-30

J J J J J J J J J J J

GI GI GI GI GI GI GI GI GI GI GI

Part number Type 7659-07-07 7659-07-09 7659-08-08 7659-09-09 7659-12-12 7659-14-14 7659-17-17 7659-21-21

J J J J J J J J

7658

7661

J GI Straight adaptor with JIC 37°

J EVU 45° Elbow fitting with JIC 37°

Swivel nut

Swivel nut

Pipe dim.1 male (mm)

Pipe dim.2 female (mm)

6 8 10 12 12 14|15|16 18|20 22 25 30|32 50

6 10 10 10 12 14|15|16 18|20 22 25 30|32 38

Part number

Type

7661-07-07 7661-08-08 7661-09-09 7661-12-12 7661-14-14 7661-17-17 7661-21-21 7661-26-26 7661-30-30

J J J J J J J J J

EVU EVU EVU EVU EVU EVU EVU EVU EVU

Pipe dim. (mm) 6 8 10 12 14|15|16 18|20 25 30|32 38

7659

7662

J GII Straight adaptor with JIC 37°

J EVT T-fitting with JIC 37°

Swivel nut

Swivel nut

Pipe dim.1 (mm) Pipe dim.2 (mm)

GII GII GII GII GII GII GII GII

6 6 8 10 12 14|15|16 18|20 25

6 10 8 10 12 14|15|16 18|20 25

Part number

Type

7662-07-07 7662-08-08 7662-09-09 7662-12-12 7662-14-14 7662-17-17 7662-21-21 7662-26-26 7662-30-30

J J J J J J J J J

EVT EVT EVT EVT EVT EVT EVT EVT EVT

Pipe dim. (mm) 6 8 10 12 14|15|16 18|20 25 30|32 38

7660

7663

J EVW 90° Elbow fitting with JIC 37°

J EVL L-fitting with JIC 37°

Swivel nut

Swivel nut

Part number

Type

7660-07-07 7660-08-08 7660-09-09 7660-12-12 7660-14-14 7660-17-17 7660-19-19 7660-21-21 7660-26-26 7660-30-30

J J J J J J J J J J

292

product group 760

EVW EVW EVW EVW EVW EVW EVW EVW EVW EVW

Pipe dim. (mm)

Part number

Type

6 8 10 12 14|15|16 18|20 22 25 30|32 38

7663-07-07 7663-08-08 7663-09-09 7663-12-12 7663-14-14 7663-17-17 7663-21-21 7663-26-26 7663-30-30

J J J J J J J J J

EVL EVL EVL EVL EVL EVL EVL EVL EVL

Pipe dim. (mm) 6 8 10 12 14|15|16 18|20 25 30|32 38

PRODUCT CATALOGUE 2009


Product group 760

Part number Type 7664-07-04 7664-08-04 7664-09-06 7664-12-06 7664-14-08 7664-17-08 7664-17-12 7664-21-12 7664-21-16 7664-26-20

J J J J J J J J J J

EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE

Hydroscand Flare fittings 7664

7667

J EVGE Adaptor with JIC 37° NPTF-thread

J EVGE Adaptor with JIC 37° UNF-thread

Swivel nut

Swivel nut. With O-ring

Pipe dim. (mm)

Thread

6 1/4"-18 8 1/4"-18 10 3/8"-18 12 3/8"-18 14|15|16 1/2"-14 18|20 1/2"-14 18|20 3/4"-14 25 3/4"-14 25 1"-11½ 30|32 1 1/4"-11½

NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF NPTF

Part number Type 7667-07-07 7667-07-09 7667-08-08 7667-09-09 7667-12-09 7667-12-12 7667-12-14 7667-12-17 7667-14-14 7667-17-17 7667-21-21 7667-26-26

J J J J J J J J J J J J

EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE

Pipe dim. (mm) 6 6 8 10 12 12 12 12 14|15|16 18|20 25 30|32

Thread

7/16"-20 9/16"-18 1/2"-20 9/16"-18 9/16"-18 3/4"-16 7/8"-14 1 1/16"-12 7/8"-14 1 1/16"-12 1 5/16"-12 1 5/8"-12

UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF UNF

7666 *

J EVGE Adaptor with JIC 37° G-thread

J KOR Reduction

Swivel nut. With O-ring and washer Part number Type 7666-07-02 7666-07-04 7666-08-04 7666-09-04 7666-09-06 7666-09-08 7666-12-04 7666-12-06 7666-12-08 7666-14-06 7666-14-08 7666-14-10 7666-14-12 7666-17-08 7666-17-12 7666-17-16 7666-21-12 7666-21-16 7666-21-20 7666-26-16 7666-26-20 7666-30-20 7666-30-24

J J J J J J J J J J J J J J J J J J J J J J J

EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE

Pipe dim. (mm) 6 6 8 10 10 10 12 12 12 14|15|16 14|15|16 14|15|16 14|15|16 18|20 18|20 18|20 25 25 25 30|32 30|32 38 38

Thread G G G G G G G G G G G G G G G G G1 G1 G1 G1

1/8" 1/4" 1/4" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 3/8" 1/2" 5/8" 3/4" 1/2" 3/4" G 1" 3/4" G 1" 1/4" G 1" 1/4" 1/4" 1/2"

M M M M M M M M M M M M M M M M M M M M M M M

7669 J EVGE Adaptor with JIC 37° M-thread Swivel nut. With O-ring and washer Part number Type 7669-07-10 7669-12-18

Pipe dim. (mm)

J EVGE J EVGE

PRODUCT CATALOGUE 2009

6 12

7670

Thread

Part number Type 7670-08-07 7670-09-07 7670-09-08* 7670-12-07 7670-12-08 7670-12-09 7670-14-07 7670-14-08 7670-14-09 7670-14-12* 7670-17-07 7670-17-08 7670-17-09 7670-17-12 7670-17-14* 7670-19-17* 7670-21-09 7670-21-12 7670-21-14 7670-21-17 7670-26-12 7670-26-14 7670-26-17 7670-26-21 7670-30-14 7670-30-17 7670-30-21 7670-30-26

J J J J J J J J J J J J J J J J J J J J J J J J J J J J

KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR

Pipe dim.1 (mm) Pipe dim.2 (mm)

8 10 10 12 12 12 14|15|16 14|15|16 14|15|16 14|15|16 18|20 18|20 18|20 18|20 18|20 22 25 25 25 25 30|32 30|32 30|32 30|32 38 38 38 38

6 6 8 6 8 10 6 8 10 12 6 8 10 12 14|15|16 18|20 10 12 14|15|16 18|20 12 14|15|16 18|20 25 14|15|16 18|20 25 30|32

* The reduction is made in one piece. The others use a nut from the fitting on which the reduction has been assembled.

M 10 x 1.0 M 18 x 1.5

293

7:6


Hydroscand Flare fittings

product group 760 7680

7691

J MAV Manometer fitting

J PLU Plug

Including sealing washer Part number Type 7680-07-04 7680-07-08 7680-08-04 7680-08-08 7680-09-04 7680-12-04 7680-12-08

J J J J J J J

Pipe dim. (mm)

MAV MAV MAV MAV MAV MAV MAV

6 6 8 8 10 12 12

Thread G G G G G G G

1/4" 1/2" 1/4" 1/2" 1/4" 1/4" 1/2"

F F F F F F F

Loose sealing washer: 6103-13-04 Sealing washer 1/4" 6603-13-08 Sealing washer 1/2"

Part number Type 7681-08-04 7681-09-04 7681-12-04 7681-14-04 7681-17-04 7681-21-04 7681-26-04 7681-30-04

J J J J J J J J

Part number

Type

7690-00-07 7690-00-08 7690-00-09 7690-00-12 7690-00-14 7690-00-17 7690-00-19 7690-00-21 7690-00-26 7690-00-30

J J J J J J J J J J

294

PLI PLI PLI PLI PLI PLI PLI PLI PLI PLI

Type

7691-00-07 7691-00-08 7691-00-09 7691-00-12 7691-00-14 7691-00-17 7691-00-19 7691-00-21 7691-00-26 7691-00-30

J J J J J J J J J J

PLU PLU PLU PLU PLU PLU PLU PLU PLU PLU

Pipe dim. (mm) 6 8 10 12 14|15|16 18|20 22 25 30|32 38

7681

7692

J MA Measurement connection

JM Nut

Pipe dim. (mm)

MA MA MA MA MA MA MA MA

Part number

8 10 12 14|15|16 18|20 25 30|32 38

Thread G G G G G G G G

1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

F F F F F F F F

Part number

Type

7692-00-07 7692-00-08 7692-00-09 7692-00-12 7692-00-14 7692-00-18 7692-00-19 7692-00-21 7692-00-26 7692-00-30

J J J J J J J J J J

M M M M M M M M M M

Pipe dim. (mm) 6 8 10 12 14|15|16 18|20 22 25 30|32 38

7690

7693

J PLI Blind nut

JD Clamping sleeve

Pipe dim. (mm)

Part number

Type

6 8 10 12 14|15|16 18|20 22 25 30|32 38

7693-00-06 7693-00-08 7693-00-10 7693-00-12 7693-00-14 7693-00-15 7693-00-16 7693-00-18 7693-00-20 7693-00-22 7693-00-25 7693-00-30 7693-00-32 7693-00-38

J J J J J J J J J J J J J J

D D D D D D D D D D D D D D

Pipe dim. (mm) 6 8 10 12 14 15 16 18 20 22 25 30 32 38

PRODUCT CATALOGUE 2009


HYDROSCAND ORFS couplings Table of contents

ORFS couplings Product group 770 * Our ORFS fittings are equivalent to SAE J1453 and ISO 8434-3. * The fittings handle high pressure up to 63.0 MPa, with a safety factor of 4:1. They are also resistant to vibrations and system impulses. * The sealing between pipe and adapter is created by a O-ring, which gives a safe unit. * The fitting can be dismantled and assembled multiple times without deterioration of the unit. The only thing that needs to be changed is the O-ring. * Compared to other types of steel pipe fittings, the ORFS fitting is very resistant to over-torque. This makes a correct assembling easier, even for untrained persons. * By changing the clamping sleeve, the fitting can be used for both metric and inch pipes.

Part numbers The ORFS fitting part number consists of two parts. The first four digits signify the type (compare with the flare fittings). The four last digits signify the recommended pipe size in inches. 1/4" for example, gives part number 04. For deviating connections, the thread size is given in the part number, for example G 3/8" = 06.

Pipe OD mm

Thread

Part

UN

number

9/16"–18 UNF

04

inch 6

1/4"

8

5/6"

11/16"–16

06

10

3/8"

11/16"–16

06

12

1/2"

13/16"–16

08

14

7701 7702 7703 7705 7706 7707 7709 7710 7711 7713 7714 7715 7720 7722 7723 7724 7725 7730 7732 7733 7740 7742 7744 7741 7745 7760 7761 7766 7762 7763 7767 7770 7781 7790 7791 7792 7793 5610-07

Straight fitting ORFS – ORFS 297 90° Elbow fitting ORFS – ORFS 297 T-fitting ORFS – ORFS – ORFS 297 Straight fitting ORFS – ORFS bulkhead 297 90° Elbow fitting ORFS – ORFS bulkhead 297 45° Elbow fitting ORFS – ORFS bulkhead 297 T-fitting ORFS – ORFS – ORFS bulkhead 298 L-fitting ORFS – ORFS – ORFS bulkhead 298 Straight fitting ORFS – NPT thread 298 Straight fitting ORFS – G thread 298 Straight fitting ORFS – UNF thread 298 Straight fitting ORFS – M thread 299 90° Elbow fitting NPT thread 299 Adjustable 90° elbow fitting ORFS G thread 299 Adjustable 90° elbow fitting UNF thread 299 Adjustable 90° elbow fitting ORFS M thread 300 Long Adjustable 90° elbow fitting ORFS – UNF 300 45° Elbow fitting ORFS – NPT thread 300 Adjustable 45° elbow fitting ORFS G thread 300 Adjustable 45° elbow fitting ORFS UNF thread 300 T-Fitting ORFS NPT thread 300 Adjustable T-fitting ORFS – ORFS – UNF thread 301 Adjustable L-fitting ORFS – ORFS – G thread 301 Adjustable T-fitting ORFS – ORFS – G thread 301 Adjustable L-fitting ORFS – ORFS – UNF thread 301 90° Elbow fitting ORFS – ORFS 301 301 45° Elbow fitting ORFS – ORFS Adaptor ORFS G thread 302 T-Fitting ORFS – ORFS – ORFS 302 L-Fitting ORFS – ORFS – ORFS 302 Adaptor ORFS – UNF thread 302 Reduction ORFS – ORFS 302 Test Point ORFS – G thread 303 303 Blind nut ORFS Plug ORFS 303 Nut ORFS 303 Clamping sleeve 303 O-ring for ORFS 303

10

16

5/8"

1"–14 UNS

10

18

3/4"

1 3/16"–16

12

22

7/8"

1 7/16"–12

16

25

1"

1 7/16"–12

16

20

12

28

7:7

20

30

20 1 1/4"

1 11/16"–12

20

1 1/2"

2"–12

24

35 38

ORFS couplings page

10

15

32

24

Hydroscand reserves the right to modify any or all parts of this catalogue without any prior notice.

PRODUCT CATALOGUE 2009

For more couplings, see chapters 4:2 and 4:4. 295


HYDROSCAND ORFS couplings

Product group 770 Assembly instructions

– Lubricate the O-ring before assembly. – Assemble as shown in the picture to the left. – Tighten the nut by wrench until resistance. – Tighten the nut according to the table below.

Nut

O-ring

Clamping sleeve

Straight thread Adapter/Body

Crimped pipe

Flanging Cut the pipe so the flange is 90°. The clamping sleeve in combination with the nut and O-ring seal the unit.

Nut

O-ring

Soldering sleeve

Straight thread Adapter/Body

Crimped pipe

Brazing An alternative to cut the pipe is to braze/weld an ORFS sleeve to the pipe.

This drawing is the property of HYDROSCAND AB and must not be copied and/or reproduced in whole or in part or transferred to a third party without our written permission. Copyright reserved.

REV.

Date

1/2 F FW (30°) R 1/3 FF WR (20°) 1/4 FFW R (15°)

Tightening torque Pipe dim. *

Description

FFWR new

Thread

3 /4 FF (45 WR °)

FFWR reassembly

6

9/16" – 18 UNF

1/2–3/4

1/4–1/2

8–10

11/16" – 16 UN

1/2–3/4

1/4–1/2

12

13/16" – 16 UN

1/2–3/4

1/4–1/2

14–16

1" – 14 UNS

1/2–3/4

1/4–1/2

18–20

1.3/16" – 12 UN

1/3–1/2

1/4–1/2

22–25

1.7/16" – 12 UN

1/3–1/2

1/4–1/2

28–32

1.11/16" – 12 UN

1/3–1/2

1/4–1/2

35–38

2"– 12 UN

1/3–1/2

1/4–1/2

FFWR Flats From Wrench Resistance

Tighten to full metal contact. Always use an appropriate wrench * Jump size may occur, then follow the thread size

LIMITS UNLESS STATED OTHERWISE

Angular

± 0,15 ± 0,25 ± 0,1 ± 0,5

Paralell

0,1

On diameters

296

Remove all burrs and sharp corners All dimensions in mm All dimensions apply before plating

Linear dimensions Linear

Description

MATERIAL:

Part No.

EN-10277-3

Designed by:

Checked by:

Approved by - date:

M. Karlsson

-

-

FINISH:

COATING acc. to HS-STD 6539 Class Fe/Zn 8 P1T

Concentricity

0,1

HEAT TREATMENT:

Surface

6,3

-

Qty.

PRODUCT CATALOGUE 2009

Filename: 7714

Description:

ORFS x JIC Drawing No:

7714-08-12


Product group 770

HYDROSCAND ORFS couplings

Part number

Thread 1

7701-04-04 7701-06-06 7701-06-08 7701-08-08 7701-08-10 7701-08-12 7701-10-10 7701-10-12 7701-12-12 7701-12-16 7701-16-16 7701-16-20 7701-20-20 7701-24-24

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

7705

Straight fitting ORFS – ORFS

Straight fitting ORFS – ORFS bulkhead

x

04 06 06 08 08 08 10 10 12 12 16 16 20 24

Part number

Thread 1

7702-04-04 7702-06-06 7702-08-08 7702-10-10 7702-12-12 7702-16-16 7702-20-20 7702-24-24

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

04 06 08 10 12 16 20 24

7701

Thread 2

Part number

Thread 1

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

7705-04-04 7705-06-06 7705-08-08 7705-10-10 7705-12-12 7705-16-16 7705-20-20 7705-24-24

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

04 06 08 08 10 12 10 12 12 16 16 20 20 24

04 06 08 10 12 16 20 24

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

04 06 08 10 12 16 20 24

Bulkhead Bulkhead Bulkhead Bulkhead Bulkhead Bulkhead Bulkhead Bulkhead

7706

90° Elbow fitting ORFS – ORFS

90° Elbow fitting ORFS – ORFS bulkhead

Type

90° 90° 90° 90° 90° 90° 90° 90°

Thread 2

Part number Thread 1

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

7706-04-04 7706-06-06 7706-08-08 7706-10-10 7706-12-12 7706-16-16 7706-20-20 7706-24-24

04 06 08 10 12 16 20 24

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

04 06 08 10 12 16 20 24

Type 90° 90° 90° 90° 90° 90° 90° 90°

Thread 2 ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

04 06 08 10 12 16 20 24

Bulkhead Bulkhead Bulkhead Bulkhead Bulkhead Bulkhead Bulkhead Bulkhead

7703

7707

T-fitting ORFS – ORFS – ORFS

45°Elbow fitting ORFS – ORFS bulkhead

Thread 1

Thread 2 Thread 3 Type

Part number Thread 1

7703-04-04 7703-06-06 7703-08-08 7703-10-10 7703-12-12 7703-16-16 7703-20-20 7703-24-24

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

7707-04-04 7707-06-06 7707-08-08 7707-10-10 7707-12-12 7707-16-16 7707-20-20 7707-24-24

PRODUCT CATALOGUE 2009

Thread 2

7702

Part number

04 06 08 10 12 16 20 24

x

04 06 08 10 12 16 20 24

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

04 06 08 10 12 16 20 24

T T T T T T T T

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

04 06 08 10 12 16 20 24

Type 45° 45° 45° 45° 45° 45° 45° 45°

Thread 2 ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

04 06 08 10 12 16 20 24

Bulkhead Bulkhead Bulkhead Bulkhead Bulkhead Bulkhead Bulkhead Bulkhead

297

7:7


HYDROSCAND ORFS couplings

Product group 770 7713

7709

Straight fitting ORFS – G thread

T-fitting ORFS – ORFS – ORFS bulkhead

With O-ring and washer

Part number Thread 1

Thread 2

Thread 3 Type

Part number

Thread 1

7709-06-06 7709-08-08 7709-10-10 7709-12-12

ORFS 06

ORFS 06

ORFS 06 T Bulkhead

ORFS 08

ORFS 08

ORFS 08 T Bulkhead

ORFS 10

ORFS 10

ORFS 10 T Bulkhead

ORFS 12

ORFS 12

ORFS 12 T Bulkhead

7713-04-02 7713-04-04 7713-04-06 7713-04-08 7713-06-04 7713-06-06 7713-06-08 7713-06-12 7713-08-04 7713-08-06 7713-08-08 7713-08-12 7713-10-06 7713-10-08 7713-10-12 7713-12-08 7713-12-12 7713-12-16 7713-12-20 7713-16-12 7713-16-16 7713-16-20 7713-20-16 7713-20-20 7713-20-24 7713-24-24

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

7710 L-fitting ORFS – ORFS – ORFS bulkhead Part number Thread 1

Thread 2

Thread 3 Type

7710-06-06 7710-08-08 7710-10-10 7710-12-12 7710-16-16

ORFS 06

ORFS 06

ORFS 06 L Bulkhead

ORFS 08

ORFS 08

ORFS 08 L Bulkhead

ORFS 10

ORFS 10

ORFS 10 L Bulkhead

ORFS 12

ORFS 12

ORFS 12 L Bulkhead

ORFS 16

ORFS 16

ORFS 16 L Bulkhead

x

04 04 04 04 06 06 06 06 08 08 08 08 10 10 10 12 12 12 12 16 16 16 20 20 20 24

G G G G G G G G G G G G G G G G G G1 G G1 G1 G1 G1

7711

Thread 1

7711-04-02 7711-04-04 7711-04-06 7711-04-08 7711-06-02 7711-06-04 7711-06-06 7711-06-08 7711-08-04 7711-08-06 7711-08-08 7711-08-12 7711-10-08 7711-10-12 7711-12-08 7711-12-12 7711-12-16 7711-16-12 7711-16-16 7711-20-16 7711-20-20 7711-24-24

ORFS OFRS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

298

04 04 04 04 06 06 06 06 08 08 08 08 10 10 12 12 12 16 16 20 20 24

x

NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT

M M M M M M M M M M M M M M M M M M M M M M

M M M M M M M M M M M M M M M M M M M M M M M M M M

Straight fitting ORFS – UNF thread With SAE-O connection

Thread 2

1/8"-27 1/4"-18 3/8"-18 1/2"-14 1/8"-27 1/4"-18 3/8"-18 1/2"-14 1/4"-18 3/8"-18 1/2"-14 3/4"-14 1/2"-14 3/4"-14 1/2"-14 3/4"-14 1"-11½ 3/4"-14 1"-11½ 1"-11½ 1 1/4"-11½ 1 1/2"- 11½

1/8" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 3/4" 1/4" 3/8" 1/2" 3/4" 3/8" 1/2" 3/4" 1/2" 3/4" G 1" 1/4" 3/4" G 1" 1/4" G 1" 1/4" 1/2" 1/2"

7714

Straight fitting ORFS – NPT thread Part number

Thread 2

Part number

Thread 1

7714-04-07 7714-04-09 7714-04-12 7714-06-07 7714-06-09 7714-06-12 7714-06-14 7714-08-09 7714-08-12 7714-08-14 7714-08-17 7714-10-12 7714-10-14 7714-12-12 7714-12-14 7714-12-17 7714-12-21 7714-16-17 7714-16-21 7714-16-26 7714-20-21 7714-20-26 7714-20-30 7714-24-30

ORFS ORFS ORFS ORFS ORFS ORFS OFRS ORFS ORFS ORFS OFRS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS OFRS OFRS ORFS OFRS ORFS

04 04 04 06 06 06 06 08 08 08 08 10 10 12 12 12 12 16 16 16 20 20 20 24

x

Thread 2 SAE O 7/16" SAE O 9/16" SAE O 3/4" SAE O 7/16" SAE O 9/16" SAE O 3/4" SAE O 7/8" SAE O 9/16" SAE O 3/4" SAE O 7/8" SAE O 1 1/16" SAE O 3/4" SAE O 7/8" SAE O 3/4" SAE O 7/8" SAE O 1 1/16" SAE O 1 5/16" SAE O 1 1/16" SAE O 1 5/16" SAE O1 5/8" SAE O 1 5/16" SAE O 1 5/8" SAE O 1 7/8" SAE O 1 7/8"

M M M M M M M M M M M M M M M M M M M M M M M M

PRODUCT CATALOGUE 2009


Product group 770

HYDROSCAND ORFS couplings

Part number

Thread 1

7715-04-10 7715-04-12 7715-04-14 7715-04-16 7715-06-14 7715-06-16 7715-08-14 7715-08-16 7715-08-18 7715-10-14 7715-10-18 7715-10-22 7715-12-33 7715-16-27

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

7715

7722

Straight fitting ORFS – M thread

Adjustable 90° elbow fitting ORFS G thread

With O-ring and washer

With O-ring and washer

x

04 04 04 04 06 06 08 08 08 10 10 10 12 16

M M M M M M M M M M M M M M

Thread 2

Part number

Thread 1

10 12 14 16 14 16 14 16 18 14 18 22 33 27

7722-04-02 7722-04-04 7722-04-06 7722-06-04 7722-06-06 7722-06-08 7722-08-06 7722-08-08 7722-08-12 7722-10-06 7722-10-08 7722-10-12 7722-12-08 7722-12-12 7722-12-16 7722-16-12 7722-16-16 7722-20-16 7722-20-20 7722-24-24

ORFS ORFS ORFS ORFS ORFS ORFS OFRS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

x x x x x x x x x x x x x x

1.0 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0

7720-04-02 7720-04-04 7720-06-02 7720-06-04 7720-06-06 7720-06-08 7720-08-06 7720-08-08 7720-08-12 7720-10-08 7720-12-12 7720-12-16 7720-16-16 7720-20-20

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

04 04 06 06 06 06 08 08 08 10 12 12 16 20

PRODUCT CATALOGUE 2009

x

Thread 2

NPT 1/8" - 27 NPT 1/4" - 18 NPT 1/8" - 27 NPT 1/4" - 18 NPT 3/8" - 18 NPT 1/2" - 14 NPT 3/8" - 18 NPT 1/2" - 14 NPT 3/4" - 14 NPT 1/2" - 14 NPT 3/4" - 14 NPT 1" - 11½ NPT 1" - 11½ NPT 1 1/4" - 11½

NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT

M M M M M M M M M M M M M M

G G G G G G G G G G G G G G

1/8" 1/4" 3/8" 1/4" 3/8" 1/2" 3/8" 1/2" 3/4" 3/8" 1/2" 3/4" 1/2" 3/4" G 1" G 3/4" G 1" G 1" G 1 1/4" G 1 1/2"

Adjustable 90° elbow fitting UNF thread

90° Elbow fitting NPT thread Thread 1

90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90°

Thread 2

7723

7720

Part number

04 04 04 06 06 06 08 08 08 10 10 10 12 12 12 16 16 20 20 24

Type

With SAE-O connection Part number

Thread 1

7723-04-07 7723-04-09 7723-04-12 7723-06-07 7723-06-09 7723-06-12 7723-06-14 7723-08-09 7723-08-12 7723-08-14 7723-10-12 7723-10-14 7723-10-17 7723-12-14 7723-12-17 7723-12-21 7723-16-17 7723-16-21 7723-20-21 7723-20-26

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

04 04 04 06 06 06 06 08 08 08 10 10 10 12 12 12 16 16 20 20

Type

Thread 2

90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90°

SAE O 7/16" SAE O 9/16" SAE O 3/4" SAE O 7/16" SAE O 9/16" SAE O 3/4" SAE O 7/8" SAE O 9/16" SAE O 3/4" SAE O 7/8" SAE O 3/4" SAE O 7/8" SAE O 1 1/16" SAE O 7/8" SAE O 1 1/16" SAE O 1 5/16" SAE O 1 1/16" SAE O 1 5/16" SAE O 1 5/16" SAE O 1 5/8"

299

7:7


HYDROSCAND ORFS couplings

Part number

Thread 1

7724-04-14 7724-06-16 7724-08-18 7724-10-18 7724-10-22 7724-12-27

ORFS ORFS ORFS ORFS ORFS ORFS

Product group 770 7724

7732

Adjustable 90° elbow fitting ORFS M thread

Adjustable 45° elbow fitting ORFS G thread

With O-ring and washer

With O-ring and washer

Type

04 06 08 10 10 12

90° 90° 90° 90° 90° 90°

M M M M M M

Thread 2

Part number

Thread 1

14 16 18 18 22 27

7732-04-02 7732-04-04 7732-06-04 7732-06-06 7732-06-08 7732-08-06 7732-08-08 7732-08-12 7732-10-08 7732-12-08 7732-12-12 7732-16-16 7732-16-20 7732-20-20 7732-24-24

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

x x x x x x

1.5 1.5 1.5 1.5 1.5 2.0

7725 Long Adjustable 90° elbow fitting ORFS – UNF thread With SAE-O connection Part number Thread 1

Type

Thread 2

7725-04-07 7725-06-09 7725-08-12 7725-12-17 7725-16-21 7725-20-26

90° 90° 90° 90° 90° 90°

-

ORFS ORFS ORFS ORFS ORFS ORFS

04 06 08 12 16 20

Long 7/16" Long 9/16" Long 3/4" Long 1 1/16" Long 1 5/16" Long 1 5/8"

20 18 16 12 18 12

UNF UNF UNF UNF UNF UNF

7730 45° Elbow fitting ORFS – NPT thread With SAE-O connection Part number Thread 1

Type

7730-04-02 7730-04-04 7730-06-04 7730-06-06 7730-06-08 7730-10-08 7730-12-12 7730-24-24

ORFS 04

45°

1/8" - 27 NPT M

ORFS 04

45°

1/4" - 18 NPT M

ORFS 06

45°

1/4" - 18 NPT M

ORFS 06

45°

3/8" - 18 NPT M

ORFS 06

45°

1/2" - 14 NPT M

ORFS 10

45°

1/2" - 14 NPT M

ORFS 12

45°

3/4" - 14 NPT M

ORFS 24

45°

1 1/2" - 11½ NPT M

300

Thread 2

04 04 06 06 06 08 08 08 10 12 12 16 16 20 24

Type 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45°

Thread 2 G G G G G G G G G G G

1/8" 1/4" 1/4" 3/8" 1/2" 3/8" 1/2" 3/4" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/4" G 1 1/2"

7733 Adjustable 45° elbow fitting ORFS UNF thread With SAE-O connection Part number

Thread 1

7733-04-07 7733-04-09 7733-04-12 7733-06-09 7733-06-12 7733-08-09 7733-08-12 7733-08-14 7733-10-12 7733-10-14 7733-10-17 7733-12-14 7733-12-17 7733-16-21 7733-20-26

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

04 04 04 06 06 08 08 08 10 10 10 12 12 16 20

Type

Thread 2

45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45°

SAE O 7/16" SAE O 9/16" SAE O 3/4" SAE O 9/16" SAE O 3/4" SAE O 9/16" SAE O 3/4" SAE O 7/8" SAE O 3/4" SAE O 7/8" SAE O 1 1/16" SAE O 7/8" SAE O 1 1/16" SAE O 1 5/16" SAE O 1 5/8"

7740 T-Fitting ORFS NPT thread Part number Thread 1

Thread 2

7740-04-02 7740-04-04 7740-06-04 7740-08-06 7740-12-12 7740-16-16

ORFS 04

ORFS 04

1/8" - 27 NPT M

T

ORFS 04

ORFS 04

1/4" - 18 NPT M

T

ORFS 06

ORFS 06

1/4" - 18 NPT M

T

ORFS 08

ORFS 08

3/8" - 18 NPT M

T

ORFS 12

ORFS 12

3/4" - 14 NPT M

T

ORFS 16

ORFS 16 1" - 11 1/2 NPT M

T

Thread 3 Type

PRODUCT CATALOGUE 2009


Product group 770

HYDROSCAND ORFS couplings 7741

7745

Adjustable T-fitting ORFS – ORFS – G thread

Adjustable L-fitting ORFS – ORFS – UNF thread

With O-ring and washer

With SAE-O connection

Part number

Thread 1

Thread 2

7741-04-04 7741-06-04 7741-06-06 7741-08-08 7741-10-12 7741-12-12 7741-16-16

ORFS ORFS ORFS ORFS ORFS ORFS ORFS

ORFS ORFS ORFS ORFS ORFS ORFS ORFS

04 06 06 08 10 12 16

04 06 06 08 10 12 16

7745-04-07 7745-04-09 7745-06-09 7745-08-12 7745-08-17 7745-10-17 7745-12-12 7745-12-17 7745-16-21

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

04 04 06 08 08 10 12 12 16

04 04 06 08 08 10 12 12 16

Thread 3 SAE O 7/16" SAE O 9/16" SAE O 9/16" SAE O 3/4" SAE O 1 1/16" SAE O 1 1/16" SAE O 3/4" SAE O 1 1/16" SAE O 1 5/16"

Adjustable T-fitting ORFS – ORFS – UNF thread

90° Elbow fitting ORFS – ORFS

With SAE-O connection

Swivel nut

7742-04-07 7742-06-09 7742-06-12 7742-08-12 7742-10-14 7742-12-17 7742-16-21

ORFS ORFS ORFS ORFS ORFS ORFS ORFS

04 06 06 08 10 12 16

Part number Thread 1 ORFS ORFS ORFS ORFS ORFS ORFS

1/4" 1/4" 3/8" 1/2" 3/4" 3/4" G 1"

Thread 2

7760

Thread 2

7744-04-04 7744-08-06 7744-08-08 7744-10-08 7744-12-12 7744-16-16

G G G G G G

Part number Thread 1

7742

Part number Thread 1 ORFS ORFS ORFS ORFS ORFS ORFS ORFS

Thread 3

04 08 08 10 12 16

PRODUCT CATALOGUE 2009

04 06 06 08 10 12 16

Thread 3

Part number

Thread 1

SAE O 7/16" SAE O 9/16" SAE O 3/4" SAE O 3/4" SAE O 7/8" SAE O 1 1/16" SAE O 1 5/16"

7760-04-04 7760-06-06 7760-08-08 7760-10-10 7760-12-12 7760-16-16 7760-20-20 7760-24-24

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

04 06 08 10 12 16 20 24

Type 90° 90° 90° 90° 90° 90° 90° 90°

Thread 2 ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

04 06 08 10 12 16 20 24

FS FS FS FS FS FS FS FS

7744

7761

Adjustable L-fitting ORFS – ORFS – G thread

45° Elbow fitting ORFS – ORFS

With O-ring and washer

Swivel nut

Thread 2 ORFS ORFS ORFS ORFS ORFS ORFS

04 06 08 10 12 16

Thread 3 G G G G G

1/4" 3/8" 1/2" 1/2" 3/4" G 1"

Part number

Thread 1

7761-04-04 7761-06-06 7761-08-08 7761-10-10 7761-12-12 7761-16-16 7761-24-24

ORFS ORFS ORFS ORFS ORFS ORFS ORFS

04 06 08 10 12 16 24

Type 45° 45° 45° 45° 45° 45° 45°

Thread 2 ORFS ORFS ORFS ORFS ORFS ORFS ORFS

04 06 08 10 12 16 24

FS FS FS FS FS FS FS

301

7:7


HYDROSCAND ORFS couplings

Product group 770 7762

7767

T-Fitting ORFS – ORFS – ORFS

Adaptor ORFS – UNF thread

Swivel nut

Swivel nut. With SAE-O connection

Part number Thread 1

Thread 2

Thread 3

Type

Part number

7762-04-04 7762-06-06 7762-08-08 7762-10-10 7762-12-12 7762-16-16 7762-20-20 7762-24-24

ORFS 04

ORFS 04

ORFS 04 FS

T

ORFS 06

ORFS 06

ORFS 06 FS

T

ORFS 08

ORFS 08

ORFS 08 FS

T

ORFS 10

ORFS 10

ORFS 10 FS

T

7767-04-09 7767-06-09 7767-08-12 7767-12-17

ORFS 12

ORFS 12

ORFS 12 FS

T

ORFS 16

ORFS 16

ORFS 16 FS

T

ORFS 20

ORFS 20

ORFS 20 FS

T

ORFS 24

ORFS 24

ORFS 24 FS

T

Thread 1 ORFS ORFS ORFS ORFS

04 06 08 12

FS FS FS FS

x

Thread 2 SAE O 9/16" SAE O 9/16" SAE O 3/4" SAE O 1 1/16"

7763

7770

L-Fitting ORFS – ORFS – ORFS

Reduction ORFS – ORFS

Swivel nut Part number Thread 1 7763-04-04 7763-06-06 7763-08-08 7763-10-10 7763-12-12 7763-16-16 7763-20-20 7763-24-24

Thread 2

Thread 3

Type

Part number

Thread 1

Type

Thread 2

ORFS 04

ORFS 04 FS

ORFS 04

L

ORFS 06

ORFS 06 FS

ORFS 06

L

ORFS 08

ORFS 08 FS

ORFS 08

L

ORFS 10

ORFS 10 FS

ORFS 10

L

ORFS 12

ORFS 12 FS

ORFS 12

L

ORFS 16

ORFS 16 FS

ORFS 16

L

ORFS 20

ORFS 20 FS

ORFS 20

L

ORFS 24

ORFS 24 FS

ORFS 24

L

7770-06-04 7770-08-04 7770-08-06 7770-10-06 7770-10-08 7770-12-04 7770-12-06 7770-12-08 7770-12-10 7770-16-04 7770-16-06 7770-16-08 7770-16-10 7770-16-12 7770-20-12 7770-20-16 7770-24-20

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

Reduction Reduction Reduction Reduction Reduction Reduction Reduction Reduction Reduction Reduction Reduction Reduction Reduction Reduction Reduction Reduction Reduction

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

7766

06 08 08 10 10 12 12 12 12 16 16 16 16 16 20 20 24

04 04 06 06 08 04 06 08 10 04 06 08 10 12 12 16 20

Adaptor ORFS G thread Swivel nut. With O-ring and washer Part number 7766-04-04 7766-04-06 7766-06-04 7766-06-06 7766-08-06 7766-08-08 7766-10-08 7766-12-12 7766-16-16 7766-20-20 7766-24-24

302

Thread 1 ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

04 04 06 06 08 08 10 12 16 20 24

FS FS FS FS FS FS FS FS FS FS FS

x

Thread 2 G G G G G G G G

1/4" 3/8" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

M M M M M M M M M M M

PRODUCT CATALOGUE 2009


Product group 770

HYDROSCAND ORFS couplings

7781

7792

Test Point ORFS â&#x20AC;&#x201C; G thread

Nut ORFS

Part number

Thread 1

Type

Thread 2

Part number

Thread 1

7781-04-04 7781-06-04 7781-08-04

ORFS 04 ORFS 06 ORFS 08

Test Point Test Point Test Point

G 1/4" F G 1/4" F G 1/4" F

7792-00-04 7792-00-06 7792-00-08 7792-00-10 7792-00-12 7792-00-16 7792-00-20 7792-00-24

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

Pipe dim. (mm)

04 06 08 10 12 16 20 24

6 8|10 12 14|15|16 18|20 22|25 28|30|32 35|38

7790

7793

Blind nut ORFS Part number

Description

7790-00-04 7790-00-06 7790-00-08 7790-00-10 7790-00-12 7790-00-16 7790-00-20 7790-00-24

Blind Blind Blind Blind Blind Blind Blind Blind

nut nut nut nut nut nut nut nut

Thread ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

04 06 08 10 12 16 20 24

Clamping sleeve

Part number

Description

7793-00-06 7793-00-08 7793-00-10 7793-00-12 7793-00-14 7793-00-15 7793-00-16 7793-00-18 7793-00-20 7793-00-22 7793-00-25 7793-00-28 7793-00-30 7793-00-32 7793-00-35 7793-00-38

Clamping Clamping Clamping Clamping Clamping Clamping Clamping Clamping Clamping Clamping Clamping Clamping Clamping Clamping Clamping Clamping

Pipe dim.

sleeve sleeve sleeve sleeve sleeve sleeve sleeve sleeve sleeve sleeve sleeve sleeve sleeve sleeve sleeve sleeve

6 8 10 12 14 15 16 18 20 22 25 28 30 32 35 38

7791

5610-07

Plug ORFS Part number

Description

7791-00-04 7791-00-06 7791-00-08 7791-00-10 7791-00-12 7791-00-16 7791-00-20 7791-00-24

Plug Plug Plug Plug Plug Plug Plug Plug

PRODUCT CATALOGUE 2009

Thread ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

04 06 08 10 12 16 20 24

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

O-ring for ORFS

Part number

Description

5610-07-04 5610-07-06 5610-07-08 5610-07-10 5610-07-12 5610-07-16 5610-07-20 5610-07-24

O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring

for for for for for for for for

ORFS ORFS ORFS ORFS ORFS ORFS ORFS ORFS

04 06 08 10 12 16 20 24

7.65 9.25 12.42 15.60 18.77 23.52 29.87 37.82

x x x x x x x x

1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78

303

7:7


HYDROSCAND Valves/Filters/Test points Valves/Filters/Test points

Table of contents

Product group 800

Valves page

8001 8003 8004 8031 8032 8034 8011 8042 8044-01 8041 8044-02 8031-8 8031-89 8072 8072-94

2-way ball valve, G-threaded, female, Black 2-way ball valve, SKL-connection, Black 2-way ball valve, SKS-connection, Black 2-way ball valve, G-threaded, female 2-way ball valve, SKL-connection 2-way ball valve, SKS-connection 3-way reversing valve, L-drilled, G-threaded 3-way reversing valve, T-drilled, G-threaded 3-way ball valve, L-drilled, G-threaded, female 3-way reversing valve, L-drilled, G-threaded 3-way ball valve, T-drilled, G-threaded, female Handle Locking device Check/non-return valve, G-threaded, female Panel mounting nut

Valves low pressure page

8090 8090 8091 8094 8070

2-way 2-way 3-way 2-way Check

Filters page

8100 8104 8101 8201 8109 8102 8103 8203

Level Regulator Filler cap Spin-on filter Spin-on filter element for 8101 Air filter Suction strainers Return filter Filter element

Test points & accessories page

8301 8303 8304 8306 8307 8308 8315 8309 8360 8360 8360 8360 8360 8372

Test points M 16 x 2 G-threaded Test points M 16 x 2 DKLO connection Test points M 16 x 2 DKSO connection Manometer fitting Manometer fitting Measurement hose M 16 x 2 – G 1/4" Joint Measurement hose M 16 x 2 – 2 Accessories for manometer Manometer Ø63 mm Digital manometer Ø63 mm Manometer Ø63 mm Manometer Ø100 mm Test equipment with 2 manometers

Ball Valves The ball valves are mainly used as shut-down valves and distribution valves. Valves are a simple and safe solution for cut-off. The advantages of the ball valves are low flow resistance, high density and easy maintenance. Hydroscand can offer customer adapted ball valves in all functions and materials. Ball seal made of POM (thermoplastic), stem and adapter sealing made of NBR. Other materials on request. NOTE! The Types 8011, 8041 and 8042 can only be pressurised on inlet port 1, otherwise there will be inner leakage.

Level Measurements Level instruments, with or without thermometer, are delivered complete with drilled screws, oil resistant seal, and frame. The standard area of measure is 0 – 100°C.

ball valve, low pressure ball valve, low pressure, short thread ball valve, low pressure, L-drilled Mini valve, low pressure valve, G-threaded, female

306 306 306 306 306 306 307 307 307 307 307 308 308 309 309

308 308 308 308 309

310 310 310 310 310 310 310 310

Filters Spin-on filters for suction and return lines – 10 micron. Suction strainers – 125 micron. Return oil filters for tank assembling. Complete filler gap with air filters and screws. Air filters – 40 micron.

Test Points Test points with connection M 16 x 2 are available with the most common connection threads towards the port. Manometer connections and joints are included in Hydroscand's product selection.

311 311 311 311 311 311 311 311 312 312 312 312 312 312

Hydroscand reserves the right to modify any or all parts of this catalogue without any prior notice.

PRODUCT CATALOGUE 2009

305

8


HYDROSCAND Valves/Filters/Test points

Part number

Product Group 801

Product Group 801

8001

8031

2-way ball valve, G-threaded, female, Black

2-way ball valve, G-threaded, female, yellow chromated

Connection

8001-02-02 8001-04-04 8001-06-06 8001-08-08 8001-12-12 8001-16-16 8001-20-20 8001-24-24 8001-32-32

Product group 800

G G G G G

1/8" F 1/4" F 3/8" F 1/2" F 3/4" F G 1" F G 1 1/4" F@ G 1 1/2" F@ G 2" F@

DN

Work pr.

4 6 10 12 20 25 32 40 50

50.0 50.0 50.0 50.0 40.0 40.0 40.0 40.0 31.5

MPa MPa MPa MPa MPa MPa MPa MPa MPa

Part number

Connection

8031-04-04 8031-06-06 8031-08-08 8031-12-12 8031-16-16 8031-20-20 8031-24-24 8031-32-32

DN

G G G G

1/4" F 3/8" F 1/2" F 3/4" F G 1" F G 1 1/4" F @ G 1 A1/2" F@ G 2" F@

Work pr.

6 10 12 20 25 32 40 50

50.0 50.0 50.0 40.0 40.0 40.0 40.0 40.0

MPa MPa MPa MPa MPa MPa MPa MPa

@ = Cast housing

@ = Cast housing Product Group 801

Product Group 801

8032

8003

2-way ball valve, SKL-connection, yellow chromated

2-way ball valve, SKL-connection, Black Part number Connection 8003-08-14 8003-10-16 8003-12-18 8003-15-22 8003-18-26 8003-22-30 8003-28-36 8003-35-45 8003-42-52

SKL SKL SKL SKL SKL SKL SKL SKL SKL

8 M 10 M 12 M 15 M 18 M 22 M 28 M 35 M 42@ M

Thread 14 16 18 22 26 30 36 45 52

x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

DN 6 8 10 12 16 20 25 32 40

Work pr. 50.0 50.0 50.0 50.0 40.0 40.0 40.0 40.0 40.0

MPa MPa MPa MPa MPa MPa MPa MPa MPa

@ = Cast housing

Part number Connection 8032-06-12 8032-08-14 8032-10-16 8032-12-18 8032-15-22 8032-18-26 8032-22-30 8032-28-36 8032-35-45 8032-42-52

SKL SKL SKL SKL SKL SKL SKL SKL SKL SKL

6 M 8 M 10 M 12 M 15 M 18 M 22 M 28 M 35 M 42@ M

Thread 12 14 16 18 22 26 30 36 45 52

x x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

DN 4 6 8 10 12 16 20 25 32 40

Work pr. 50.0 50.0 50.0 50.0 50.0 40.0 40.0 40.0 40.0 40.0

MPa MPa MPa MPa MPa MPa MPa MPa MPa MPa

@ = Cast housing Product Group 801

Product Group 801

8034

8004

2-way ball valve, SKS-connection, yellow chromated

2-way ball valve, SKS-connection, Black Part number Connection 8004-08-16 8004-10-18 8004-12-20 8004-14-22 8004-16-24 8004-20-30 8004-25-36 8004-30-42 8004-38-52

SKS SKS SKS SKS SKS SKS SKS SKS SKS

@ = Cast housing

8 M 10 M 12 M 14 M 16 M 20 M 25 M 30 M 38@ M

Thread 16 x 18 x 20 x 22 x 24 x 30 x 36 x 42 x 5 2x

1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

DN 4 6 8 10 12 16 20 25 32

Work pr. 50.0 50.0 50.0 50.0 50.0 40.0 40.0 40.0 40.0

MPa MPa MPa MPa MPa MPa MPa MPa MPa

Part number Connection 8034-08-16 8034-10-18 8034-12-20 8034-16-24 8034-20-30 8034-25-36 8034-30-42 8034-38-52

SKS8 SKS10 SKS12 SKS16 SKS20 SKS25 SKS30 SKS38@

Thread

DN

M16x1.5 M18x1.5 M20x1.5 M24x1.5 M30x2.0 M36x2.0 M42x2.0 M52x2.0

4 6 8 12 16 20 25 32

Work pr. 50.0 50.0 50.0 50.0 40.0 40.0 40.0 40.0

MPa MPa MPa MPa MPa MPa MPa MPa

NB! The pressure is only related to the valves. Compare with the pressure class for the connection. @ = Cast housing

306

PRODUCT CATALOGUE 2009


Product group 800

HYDROSCAND Valves/Filters/Test points Product Group 801

Part number 8011-04-04 8011-06-06 8011-08-08 8011-12-12 8011-16-16

Part number 8042-04-04 8042-06-06 8042-08-08 8042-12-12 8042-16-16

Connection G G G G

1/4" 3/8" 1/2" 3/4" G 1"

F F F F F

1/4" 3/8" 1/2" 3/4" G 1"

8011

8041

3-way reversing valve, L-drilled, G-threaded, female, black

3-way reversing valve, L-drilled, G-threaded, female, yellow chromated

DN

Drill

6 10 12 20 25

F F F F F

Work pr.

L-Drilled L-Drilled L-Drilled L-Drilled L-Drilled

50.0 50.0 50.0 40.0 40.0

MPa MPa MPa MPa MPa

Part number 8041-02-02 8041-04-04 8041-06-06 8041-08-08 8041-12-12 8041-16-16 8041-20-20 8041-24-24

Connection G G G G G

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

F F F F F F F F

DN

Drill

Work pr.

4 6 10 12 20 25 25 25

L-Drilled L-Drilled L-Drilled L-Drilled L-Drilled L-Drilled L-Drilled L-Drilled

50.0 MPa 50.0 MPa 50.0 MPa 50.0 MPa 40.0 MPa 40.0 MPa 40.0 MPa 40.0MPa

Product Group 801

Product Group 801

8042

8044-02

3-way reversing valve, T-drilled, G-threaded, female, yellow chromated

3-way ball valve, T-drilled, G-threaded, female

Connection G G G G

Product Group 801

F F F F F

DN

Drill

Work pr.

6 10 12 20 25

T-Drilled T-Drilled T-Drilled T-Drilled T-Drilled

50.0 50.0 50.0 40.0 40.0

MPa MPa MPa MPa MPa

Part number Connection 8044-02-02 8044-02-04 8044-02-06 8044-02-08 8044-02-12 8044-02-16 8044-02-20 8044-02-24

G G G G G

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

F F F F F F F F

Drill T-Drilled T-Drilled T-Drilled T-Drilled T-Drilled T-Drilled T-Drilled T-Drilled

Work pr. 50.0 50.0 50.0 50.0 31.5 31.5 31.5 10.0

MPa MPa MPa MPa MPa MPa MPa MPa

NB! The pressure is only related to the valves. Compare with the pressure class for the connection. Product Group 801

8044-01 3-way ball valve, L-drilled, G-threaded, female Part number Connection 8044-01-02 8044-01-04 8044-01-06 8044-01-08 8044-01-12 8044-01-16 8044-01-20 8044-01-24

G G G G G

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

F F F F F F F F

Drill L-Drilled L-Drilled L-Drilled L-Drilled L-Drilled L-Drilled L-Drilled L-Drilled

Work pr. 50.0 50.0 50.0 50.0 31.5 31.5 31.5 10.0

MPa MPa MPa MPa MPa MPa MPa MPa

8

PRODUCT CATALOGUE 2009

307


HYDROSCAND Valves/Filters/Test points

Product group 800

Product Group 801

Product Group 802

8090

8031-8

2-way ball valve, low pressure, short thread

Handle For ball valves Part number

Connection

Material

Bended Zn 8031-80-xx 8031-81-xx Straight Al 8031-83-xx Straight Steel 8031-85-xx Bended Al xx = Hole dimension mm (07|08|10|11|12|14|17|19|22)

Teflon, brass housing Part number 8090-03-04 8090-05-06 8090-07-08 8090-11-12 8090-15-16 8090-19-20 8090-23-24 8090-31-32 8090-39-40 8090-47-48 8090-63-64

Type Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball

Connection

valve valve valve valve valve valve valve valve valve valve valve

G G G G

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1/1/2" G 2" G 2 1/2" G 3" G 4"

F F F F F F F F F F F

3-way ball valve, low pressure, L-drilled

Locking device For 2- and 3-way valves

8031-89-04 8031-89-06 8031-89-08 8031-89-10 8031-89-12 8031-89-20

4/6 8 / 10 12 16 20 / 25 32 / 40 / 50

Teflon, brass housing Part number 8091-04-04 8091-06-06 8091-08-08 8091-12-12 8091-16-16 8091-20-20 8091-24-24 8091-32-32

Type L-drilled L-drilled L-drilled L-drilled L-drilled L-drilled L-drilled L-drilled

Connection G G G G

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

F F F F F F F F

8090-04-04 8090-06-06 8090-08-08 8090-12-12 8090-16-16 8090-20-20 8090-24-24 8090-32-32 8090-40-40 8090-48-48 8090-64-64

308

Type Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball Ball

valve valve valve valve valve valve valve valve valve valve valve

2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5

MPa MPa MPa MPa MPa MPa MPa MPa

8090

8094

2-way ball valve, low pressure

2-way Mini valve, low pressure

Teflon, brass housing

Teflon, brass housing

Connection G G G G

Work pr.

Product Group 802

Product Group 802

Part number

MPa MPa MPa MPa MPa MPa MPa MPa MPa MPa MPa

8091

8031-89

Suits size DN

4.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0

Product Group 802

Product Group 801

Part number

Work pr.

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2" G 2 1/2" G 3" G 4"

F F F F F F F F F F F

Work pr. 6.5 6.5 6.5 4.0 4.0 4.0 4.0 4.0 3.0 3.0 3.0

MPa MPa MPa MPa MPa MPa MPa MPa MPa MPa MPa

Part number 8094-04-04 8094-06-06 8094-08-08 8094-12-12 8094-16-16

Type Mini Mini Mini Mini Mini

valve valve valve valve valve

Connection G G G G

1/4" 3/8" 1/2" 3/4" G 1"

F F F F F

Work pr. 3.0 3.0 3.0 3.0 3.0

MPa MPa MPa MPa MPa

PRODUCT CATALOGUE 2009


Product group 800

HYDROSCAND Valves/Filters/Test points Product Group 801

8070 Check valve, G-threaded, female Part number 8070-02-02 8070-04-04 8070-06-06 8070-08-08 8070-12-12

Connection

DN

G 1/8" G /4" G 3/8" G /2" G 3/4"

6 8 10 12 16

F F F F F

Work pr. 35.0 35.0 35.0 35.0 35.0

MPa MPa MPa MPa MPa

Product Group 801

8072 Check/non-return valve, G-threaded, female Opening pressure 0.5 Bar

Part number

Connection G G G G G

8072-02-02 8072-04-04 8072-06-06 8072-08-08 8072-12-12

1/8" 1/4" 3/8" 1/2" 3/4"

F F F F F

DN 6 8 10 12 16

Work pr. 35.0 35.0 35.0 35.0 35.0

MPa MPa MPa MPa MPa

Product Group 801

8072-94 Panel mounting nut For 8070/8072 Part number Type 8072-94-06 8072-94-10 8072-94-16 8072-94-30

Panel Panel Panel Panel

To mounting mounting mounting mounting

PRODUCT CATALOGUE 2009

DN

nut 8070 / 8072 6 nut 8070 8-10 nut 8070 12-16 nut 8070 20-30

8

309


HYDROSCAND Valves/Filters/Test points

Product group 800 Ø

Product Group 803

8100

c/c

8109

Level REGULATOR

Air filter

With thermometer Part number 8100-00-01 8100-00-02 8100-00-03 8100-00-04 8100-00-05 8100-00-06

Product Group 803

c/c

Fixing screw

76 76 thermometer 127 127 thermometer 127 + 127 127 + 127 thermometer

2 2 2 2 3 3

x x x x x x

M M M M M M

10 10 12 12 12 12

Thread

Part number

8104

H

Ø

G 1/4" G 3/8" G 1/2" G 3/4" G 1"

53 53 75 75 115

8109-00-04 8109-00-06 8109-00-08 8109-00-12 8109-00-16

Filter 3 3 3 3 3

Thread

Product Group 803

Ø

Thread

micron micron micron micron micron

Product Group 803

8102

Length

Filler cap

Suction strainers Ø

Part number 8104-00-01 8104-00-02 8104-00-03

Part number 8101-11-02 8101-11-12 1) 8101-21-02 8101-21-12 1)

Hole Ø 30 Ø 51 Ø 51

Screw Ø 41 3 x M5 Ø 73 6 x M5 Ø 73 6 x M5

Connection G G G1 G1

Ø 46 80 80

H

111 10 micron 134 10 micron 204 10 micron

55 55 145 145

Part number 8102-00-15 8102-00-17 8102-00-75

Thread

Ø

Filter

G 1/2" G 1" G 1 1/2"

52 70 130

78 95 262

Product Group 803

Product Group 803

8101

8103

Spin-on filter

Return filter

Q max

3/4" 3/4" 1/4" 1/4"

Filter

l/min l/min l/min l/min

Filtering 10 10 10 10

micron micron micron micron

nom. nom. nom. nom.

Part number 8103-03-20 8103-06-20 8103-10-20 8103-18-20

Thread Recommended Ø G 1/2" G 3/4" G 1" G 1 1/4"

25 40 55 125

l/m l/m l/m l/m

Filtering 10 10 10 10

micron micron micron micron

nom. nom. nom. nom.

1) Manometer included, 8101-92-02

Product Group 803

Part number 8201-00-01 8201-00-03 8201-02-01 8201-02-03

310

8201

8203

Spin-on filter element for 8101

Filter element

Description 10 10 25 25

micron micron micron micron

nominal nominal nominal nominal

Fits 8101-11-xx 8101-21-xx 8101-11-xx 8101-21-xx

For return filters 8103 Part number 8203-03-20 8203-06-20 8203-10-20 8203-18-20

Diam. 50 70 70 99

Length

mm 73.5 mm mm 91.0 mm mm 136.0 mm mm 216.0 mm

Filtering 10 10 10 10

micron micron micron micron

nom. nom. nom. nom.

PRODUCT CATALOGUE 2009


Product group 800

Part number 8301-00-02 8301-00-04 8301-00-06 8301-00-08

HYDROSCAND Valves/Filters/Test points Product Group 804

Product Group 804

8301

8307

Test points M 16 x 2 G-threaded

Manometer fitting

Type Test Test Test Test

Connection

nipple nipple nipple nipple

M16 M16 M16 M16

x x x x

2 2 2 2

G G G G

1/8" 1/4" 3/8" 1/2"

M M M M

G-thread M16x2, female Part number Type 8307-00-04 8307-00-08

Connection

Manometer fitting Manometer fitting

G 1/4" F G 1/2" F

Product Group 804

Product Group 804

8308

8303

Measurement hose M 16 x 2 – G 1/4"

Test points M 16 x 2 DKLO connection, DIN 2353 Part number Type 8303-00-06 8303-00-08 8303-00-10 8303-00-12 8303-00-15 8303-00-18 8303-00-22 8303-00-28 8303-00-35 8303-00-42

Test Test Test Test Test Test Test Test Test Test

Connection Pipe Ø

nipple nipple nipple nipple nipple nipple nipple nipple nipple nipple

M16 M16 M16 M16 M16 M16 M16 M16 M16 M16

x x x x x x x x x x

2 2 2 2 2 2 2 2 2 2

Test Test Test Test Test Test Test Test Test Test

06 08 10 12 15 18 22 28 35 42

6 8 10 12 15 18 22 28 35 42

8308-02-00 8308-04-00 8308-06-00 8308-08-00 8308-10-00 8308-15-00 8308-20-00 8308-25-00 8308-32-00 8308-40-00 8308-45-00 8308-50-00

Measurement Measurement Measurement Measurement Measurement Measurement Measurement Measurement Measurement Measurement Measurement Measurement

Length hose hose hose hose hose hose hose hose hose hose hose hose

200 400 600 800 1,000 1,500 2,000 2,500 3,200 4,000 4,500 5,000

mm mm mm mm mm mm mm mm mm mm mm mm

Product Group 804

8304

8315

Test points M 16 x 2 DKSO connection, DIN 2353

M 16 x 2 – M 16 x 2

nipple nipple nipple nipple nipple nipple nipple nipple nipple nipple

Connection Pipe Ø M16 M16 M16 M16 M16 M16 M16 M16 M16 M16

x x x x x x x x x x

2 2 2 2 2 2 2 2 2 2

DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO

06 08 10 12 14 16 20 25 30 38

6 8 10 12 14 16 20 25 30 38

Product Group 804

8306 Manometer fitting Bulkhead, G-thread M16x2, male Part number Type 8306-00-04 8306-00-08

Part number Type

Product Group 804

Part number Type 8304-00-06 8304-00-08 8304-00-10 8304-00-12 8304-00-14 8304-00-16 8304-00-20 8304-00-25 8304-00-30 8304-00-38

DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO

Manometer connection WP 63.0 MPa

Manometer fitting, bulkhead Manometer fitting, bulkhead

PRODUCT CATALOGUE 2009

Connection G 1/4" M G 1/2" M

Joint

Part number Type 8315-00-01

Joint M 16 x 2

Product Group 804

8309 Measurement hose M 16 x 2 – 2 WP 63.0 MPa Part number Type 8309-02-00 8309-03-00 8309-04-00 8309-06-00 8309-08-00 8309-10-00 8309-15-00 8309-20-00 8309-25-00 8309-32-00 8309-40-00 8309-50-00

Measurement Measurement Measurement Measurement Measurement Measurement Measurement Measurement Measurement Measurement Measurement Measurement

Length hose hose hose hose hose hose hose hose hose hose hose hose

200 300 400 600 800 1,000 1,500 2,000 2,500 3,200 4,000 5,000

mm mm mm mm mm mm mm mm mm mm mm mm

311

8


HYDROSCAND Valves/Filters/Test points Product Group 804

Product Group 804

8360

8360

Accessories for manometer

Manometer Ø100 mm

Front flange

Clamp

Part number Description 8360-00-00 8360-02-00 8360-05-00 8360-05-01 8360-05-02

Product group 800

Connection G 3/8" down Part number Type

Rubber protection to 8360-00/8360-01 Rubber protection to 8360-02 Front flange 63 mm Flange for panel installation Clamp support 63 mm

Product Group 804

8360-02-01 8360-02-02 8360-02-04 8360-02-06 8360-02-16 8360-02-25 8360-02-40 8360-02-60

Manometer Manometer Manometer Manometer Manometer Manometer Manometer Manometer

Connection G G G G G G G G

3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8"

Pressure

down down down down down down down down

1.0 2.5 4.0 6.0 16.0 25.0 40.0 60.0

MPa MPa MPa MPa MPa MPa MPa MPa

8360 Manometer Ø63 mm

Product Group 804

Connection G 1/4" down Part number Type 8360-00-01 8360-00-02 8360-00-04 8360-00-06 8360-00-10 8360-00-16 8360-00-25 8360-00-40 8360-00-60

Connection

Manometer Manometer Manometer Manometer Manometer Manometer Manometer Manometer Manometer

G G G G G G G G G

1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

down down down down down down down down down

Pressure 1.0 2.5 4.0 6.0 10.0 16.0 25.0 40.0 60.0

MPa MPa MPa MPa MPa MPa MPa MPa MPa

Product Group 804

8363 Digital manometer Ø63 mm Connection G 1/4" down Part number Type 8363-00-70 Pressure: Accuracy: Coating:

8372

0–700 Bar 0.2 % IP65

Test equipment with 2 manometers Part number Description 8372-16-40

Test equipment 2 mano. Basic content: Manometer 16.0 MPa Manometer 40.0MPa Manometer fitting Test nipple G 1/8" Test nipple G 1/4" Test nipple G 3/8" Test nipple G 1/2" Measure hose 2 m

8372-16-41

Test equipment 2 mano. Basic contents: Manometer 16.0 MPa 1 pc (8360-00-16) Manometer 40.0 MPa 1 pc (8360-00-40) Manometer fitting G 1/4" 2 pc (8307-00-04) Test nipple G 1/8" 1 pc (8301-00-02) Test nipple G 1/4" 1 pc (8301-00-04) Test nipple G 3/8" 1 pc (8301-00-06) Test nipple G 1/2" 1 pc (8301-00-08) Measure hose 2 m 1 pc (8308-20-00) Digital manometer 0-700 bar 1 pc(8363-00-70) Rubber protection 1 pc (8360-00-00)

8372-16-42

Equipment bag 2, empty

1pc 1 pc 2 pc 1 pc 1 pc 1 pc 1 pc 1 pc

(8360-00-16) (8360-00-40) (8307-00-04) (8301-00-02) (8301-00-04) (8301-00-06) (8301-00-08) (8308-20-00)

Product Group 804

8360 Manometer Ø63 mm Connection G 1/4" back Part number Type 8360-01-01 8360-01-02 8360-01-04 8360-01-06 8360-01-16 8360-01-25 8360-01-40 8360-01-60

312

Manometer Manometer Manometer Manometer Manometer Manometer Manometer Manometer

Connection G G G G G G G G

1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

back back back back back back back back

Pressure 1.0 MPa 2.5 MPa 4.0 MPa 6.0 MPa 16.0 MPa 25.0 MPa 40.0MPa 60.0 MPa

PRODUCT CATALOGUE 2009


Hydroscand Machines

Table of Contents Product group 900

In our machine program you can find machines for assembly of hydraulic hoses, from swaging machines to collapse mandrels. The program also includes equipment for assembling, flaring and bending of pipes.

Machines

Page

Cutting machines Skive- & Insert machines Swaging machines Other machines and accessories Pipe bending machines

280 - 281 282 - 284 285 - 287 288 - 291 292

Our strive is to always develope and approve our assortment of machines. Therefore we continually develop our automatic machines. On our website, www.hydroscand.com/mac you can always find the latest news regarding new machines. Note that in this catalogue we only present a few of our machines. For more information, please contact your nearest Hydroscand office.

9

PRODUCT CATALOGUE 2005

279


CUTTING MACHINES

PRODUCT GROUP 900

ScrapCut 5-50

MiniCut 5-50

A cutting machine for hose recycling. The fitting has to be cut of the before recycling of the hose. Since an exact cutting is not necessary, a guillotine is used for an easy and quick cut of the hose. With this method you can avoid smoke and dust. ScrapCut 5-50 cuts all types of hoses up to 2".

An efficient, manual hose cutter for the medium-sized workshop. The cutter has a 300 mm blade. Suitable for 2 braided steel hoses from dimension 3/16” to 2”.

9010-10-00

ScrapCut 5-50

9006-03-00 9006-02-00 9006-01-00

MiniCut 5-50 12/24V / 1kW 300 mm blade MiniCut 5-50 1x230V / 2,2kW 300 mm blade MiniCut 5-50 3x400V / 3kW 300 mm blade

MaxiCut 5-60

PowerCut 5-75

An efficient, pneumatic hose cutting machine for the big workshop. The cutter is equipped with a 5kW motor and a 400 mm blade. Suitable for 4 braided steel hose from dimension 3/16” to 2”.

A pneumatic hose cutting machine for the big workshop. The crosscutter is equipped with a 7,5kW motor and a 520 mm blade. Suitable for 4 and 6 braided steel hose from dimension 3/16” to 2” and industrial hoses up to dimension 3”.

9009-00-00

9010-00-00

280

MaxiCut 5-60 400V / 5kW 400 mm blade, pneumatic

PowerCut 5-75 400V / 7,5kW 520 mm blade, pneumatic

PRODUCT CATALOGUE 2005


PRODUCT GROUP 900

CUTTING MACHINES

SemiCut 4-20CTS SemiCut 4-20CTS is an automatic hose cutting machine, that uses a high speed servo-motor to give a quick and exact cutting of the hose (+/- 1mm). The touch display has a storage capacity for up to 1200 part number configurationes. 9079-00-02

SemiCut 4-20CTS 230V / 0,4kW, servo-motor

AutoCut 5-32 A computer controlled and fully automatic hose cutting machine. The cutter is equiped with a 5,5kW motor and a 520 mm blade. Suitable for 1 and 2 braided steel hoses from dimension 3/16” to 1 1/4” and 4 braided steel hoses upp to dimension 1”. The PLC makes simple programming with memory possible. The machine is designed to facilitate the changing of tools. To improve productivity a hose reel and a conveying belt is used. 9080-01-00

AutoCut 5-32 400V / 5,5kW

Cutting blade Blades for the best cutting result. We have three different types; one standard blade and two toothed blades, all manufatured in hardened steel. The blades gives quick and clean cutting results on both 4 and 6 braided steel hoses. Avaliable in dimensions from 200 mm up to 520 mm.

KnifeCut 4-30BT KnifeCut 4-30BT is a pneumatically driven cutting machine for cabel, polyamid and textile reinforced hose. Suitable for hoses with an outside diameter of 4-30mm. Delivered with two tools, one for standard hoses and one for twin hoses. 9085-01-01

KnifeCut 4-30BT

Cutting blades 9002-00-02 Blade std. 9001-00-01 Blade std. 9001-00-02 Blade std. 9006-06-01 Blade std. 9006-00-01 Blade std. 9003-00-01 Blade std. 9009-01-01 Blade std. 9005-00-01 Blade std. 9006-01-02 9003-01-02 9009-01-02 9005-00-03 9005-00-04

200x3/40 mm 250x3/16 mm 250x3/25 mm 250x3/25,4 mm 250x3/32 mm 300x3/16 mm 400x4/50 mm 520x3/38 mm

Toothed blade 250x3/40 mm Toothed blade 300x3/50 mm Toothed blade 400x3/50 mm Toothed blade 520x3/38 mm Toothed blade 520x3/50 mm

9

Adapterringar 9006-01-05 Adapter ring for toothed blade 40x25,4 mm 9006-01-06 Adapter ring for toothed blade 40x32 mm 9005-01-07 Adapter ring for toothed blade 50x32 mm 9005-01-04 Adapter ring for toothed blade 50x38 mm 9005-01-05 Adapter ring for toothed blade 50x40 mm

PRODUCT CATALOGUE 2005

281


SKIVING AND INSERT MACHINES

PRODUCT GROUP 900

SkivingMan A manual skiving machine, for use in a vice. SkivingMan is suitable for small workshops and is very easy to handle. Use with our skive tools 9022 - EST. 9020-00-05

Skivingman, manual skiving machine (ecl. tools)

MidiSkive 5-50B / MidiSkive 5-50C A skiving machine for benched use in the medium-sized workshop for in- and outer skiving. MidiSkive is easy to control with either a button or a foot pedal. It can also be delivered complete with a work bench and toolholder (MidiSkive 5-50C). 9020-04-01 9020-03-00

MidiSkive 5-50B 400 V/0,37kW motor, complete skiving machine excl. table. MidiSkive 5-50C 400 V/0,37kW motor, complete skiving machine with table and tool panel

PowerSkive 5-50 A semi-automatic skiving machine for inner- and outer skiving. Also designed for assembling of hose and ďŹ tting. The machine is quick, reliable and easy to use. A unique centering system assures that the hose is correctly aligned during the entire skiving and inserting process. 9082-03-00

282

PowerSkive 5-50, skiving- & insert machine 400 V/0,37kW motor, 315 rpm

PRODUCT CATALOGUE 2005


PRODUCT GROUP 900

SKIVING AND INSERT MACHINES

TwinSkive 5-50 A new semi-automatic skiving machine, which skives both internally and externally. OneSkive can also, with the Push-On tool, assemble hose and ďŹ tting. The machine is quick, reliable and easy to handle. A unique centering system assures that the hose is correctly aligned during the entire skiving and inserting process. 9082-02-00

TwinSkive 5-50, skive- & insertmachine 400 V/0,37kW motor, 315 rpm

Skiving tools The assortment consists of both inner- and outer skiving tools. The external tool, that can be supplied with two cutters that are used on braided and sprial layered hoses. The internal tool is mainly used on braided high pressure hoses. We also have a new skiving tool for Oneskive 5-50, that makes inner and outer skiving possible at the same time.

EST

Skiving tool, external, long arm - EST 9022-01-00 Holder for skiving tool + 1 long arm. 9022-00-02 Long arm 9022-00-03 Cutting steel 9022-01-20 Mandrel 1 1/4" long 9022-01-24 Mandrel 1 1/2" long 9022-01-32 Mandrel 2" long

le

oub

-d EST

Skiving tool, external, short arm - EST 9022-00-00 Holder for skiving tool + 1 short arm. 9022-00-01 Short arm 9022-00-03 Cutting steel 9022-02-03 Mandrel 3/16" 9022-00-04 Mandrel 1/4" 9022-00-05 Mandrel 5/16" 9022-00-06 Mandrel 3/8" 9022-00-08 Mandrel 1/2" 9022-00-10 Mandrel 5/8" 9022-00-12 Mandrel 3/4" 9022-00-16 Mandrel 1"

IST

OST

PRODUCT CATALOGUE 2005

Skiving tool, internal, adjustable - IST 9025-01-05 Cutting steel internal, 5 mm - 3/8" 9025-01-06 Cutting steel internal, 6 mm - 1/2" 9025-01-08 Cutting steel internal, 8 mm - 5/8" - 3/4" 9025-01-10 Cutting steel internal, 10 mm - 1" - 1 1/4" 9025-02-10 Cutting steel internal (long), 10 mm - 1 1/2" - 2" 9025-15-06 Internal skiving tool R9R/SSH4 3/8" 9025-15-08 Internal skiving tool R9R/SSH4 1/2" 9025-15-10 Internal skiving tool R9R/SSH4 5/8" 9025-15-12 Internal skiving tool R9R/SSH4 3/4" 9025-15-16 Internal skiving tool R9R/SSH4 1" 9025-15-20 Internal skiving tool R9R/SSH4 1 1/4" 9025-15-24 Internal skiving tool R9R/SSH4 1 1/2" 9025-15-32 Internal skiving tool R9R/SSH4 2" Skiving tool external/internal, adjustable - OST 9025-16-08 External/internal skiving tool incl. cutting steel 1/2" 9025-16-10 External/internal skiving tool incl. cutting steel 5/8" 9025-16-12 External/internal skiving tool incl. cutting steel 3/4" 9025-16-16 External/internal skiving tool incl. cutting steel 1" 9025-16-20 External/internal skiving tool incl. cutting steel 1 1/4" 9025-16-24 External/internal skiving tool incl. cutting steel 1 1/2" 9025-16-32 External/internal skiving tool incl. cutting steel 2"

9

283


SKIVING AND INSERT MACHINES

PRODUCT GROUP 900

TwinPush 5-50 A semi-automatic machine for the easy assembling of hose and fitting. The machine is quick, reliable and easy to use. A unique centering system that assures that the hose is correctly aligned during the entire skiving and inserting process. The machine is equiped with two tool holders, which makes it easy to change between the tool for straight fittings and the tool for 45°/90° fittings. 9083-03-00

Push-On tool Tools for a quick and easy assembling of both straight and elbow hose fittings with the hose. The Push-On tool is used on AutoSkive 5-50, OneSkive 5-50 and AutoInsert 5-50.

TwinPush 5-50, insert machine 230 V, excl. tool

Push-On tool to straight fittings 9083-01-03 Push-on tool straight 9083-01-04 Push-on tool straight 9083-01-05 Push-on tool straight 9083-01-06 Push-on tool straight 9083-01-08 Push-on tool straight 9083-01-10 Push-on tool straight 9083-01-12 Push-on tool straight 9083-01-16 Push-on tool straight 9083-01-20 Push-on tool straight 9083-01-24 Push-on tool straight 9083-01-32 Push-on tool straight

3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2" 2"

Push-On tool to 45 and 90 degree fittings 9083-02-03 Push-on tool 45/90 degree 9083-02-04 Push-on tool 45/90 degree 9083-02-05 Push-on tool 45/90 degree 9083-02-06 Push-on tool 45/90 degree 9083-02-08 Push-on tool 45/90 degree 9083-02-10 Push-on tool 45/90 degree 9083-02-12 Push-on tool 45/90 degree 9083-02-16 Push-on tool 45/90 degree 9083-02-20 Push-on tool 45/90 degree 9083-02-24 Push-on tool 45/90 degree 9083-02-32 Push-on tool 45/90 degree

3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2" 2"

Push-On tool for fittings with ferrule stop ”plastic ring” 9083-03-03 Push-on tool 45/90 degree 3/16" PR 9083-03-04 Push-on tool 45/90 degree 1/4" PR 9083-03-05 Push-on tool 45/90 degree 5/16" PR 9083-03-06 Push-on tool 45/90 degree 3/8" PR 9083-03-08 Push-on tool 45/90 degree 1/2" PR 9083-03-10 Push-on tool 45/90 degree 5/8" PR 9083-03-12 Push-on tool 45/90 degree 3/4" PR 9083-04-XX Push-on tool 45/90 degree Special manufactured according to customer request

284

PRODUCT CATALOGUE 2005


PRODUCT GROUP 900

SWAGING MACHINES

Swaging tool n gMa

gin

Swa

A manual swaging tool mounted in a vice. SwagingMan is very easy to handle for low pressure hoses. SwagingMan 9025-00-01 SwagingMan 8-20, swaging tool for low pressure hose 8-20mm 9025-01-01 SwagingMan 9-19, swaging tool for low pressure hose 9-19mm 9025-02-01 SwagingMan 9-28, swaging tool for low pressure hose 8-28mm Benchtop model

Portable hose swaging machines Hydroscand assortment of portable hose swages covers everything from P16HP with hand pump units, to P32CS driven by battery. P32CS are suitable for hoses up to 2â&#x20AC;? and are equiped with QC-system for extra quick die change. P16 HP excl. dies 9070-00-00 P16 HP 3/16"-1" Swaging dies to P16 HP 9070-16-XX Standard dies (per dia.) 16-14/16-31

P 16

HP

P20 excl. dies 9066-00-00 P20 HP 3/16"- 1 1/4" 9066-00-03 P20 CS 3/16"- 1 1/4" 12-24V Swaging dies to P20 9063-20-XX QC-standard dies ( per dim.) 20-10/20-47 9063-20-XXM Marking dies ( per dim.) 20-14/20-47 9060-3X-XXM Stamp engraving - logo, digits, letters P32 excl. dies 9062-32-00 P32 CS swaging 3/16"-2" 12-24V Swaging dies P32 9060-32-XX QC-Standard dies ( per dim.) 32-10/32-69 9060-32-XXM Marking dies ( per dim.) 32-14/32-69 9060-3X-XXM Stamp engraving - logo, digits, letters

HP P 20

CS P 32

9

PRODUCT CATALOGUE 2005

285


SWAGING MACHINES

PRODUCT GROUP 900

"P" range of swaging machines The "P" series, medium-sized, swaging machines covers everything from P20MS to micro processed controlled P50VS. All models are equiped with QC-system for extra quick change of dies. The swages are manufactured in different designs: MS, IS, AS and VS. The difference between the models are mainly the kind of controll equipment the machine has. The MS-model are manufactured with a potentiometer on the swage head. IS- and AS-models have a stepless potentiometer adjustment of swaging- and opening diameter. The VS-modell is computerized and has a tool management memory that can memorize up to 200 different sets and swage dimensions.

P 20

MS

P20 excl. dies 9068-00-00 P20 MS swage 3/16"- 1 1/4" 9068-00-03 P20 MS swage 3/16"- 1 1/4", 1-phase 230 V/1,5 kW. 9068-00-04 9068-00-08

P20 IS swage 3/16"- 1 1/4" P20 IS swage 3/16"- 1 1/4", 1-phase 230 V/1,5 kW.

9068-00-05 9068-00-09

P20 AS swage 3/16"- 1 1/4" P20 AS swage 3/16"- 1 1/4", 1-phase 230 V/1,5 kW.

9068-00-07

P20 VS swage 3/16"- 1 1/4"

Swaging dies to P20 9063-20-XX QC-standard dies ( per dim.) 20-10/20-47 9063-20-XXM Marking dies ( per dim.) 20-14/20-47 9060-3X-XXM Stamp engraving - logo, digits, letters Accessories to P20 9064-00-02 QC-stand P20, incl. QC-tool, excl. dies 9064-01-02 Stand P20/32 without QC-system 9064-00-06 Mechanical backstopp P20 9064-00-07 QC-bytestool P20 P32 excl. dies 9062-01-00 P32 MS swage 3/16"-2" 9062-01-01 P32 MS swage 3/16"-2", 1-phase 230V/1,5kW. 9062-01-02

P32 IS swage 3/16"-2"

9062-01-03

P32 AS swage 3/16"-2"

9062-01-04

P32 VS swage 3/16"-2"

P 50

VS

Swaging dies P32 9060-32-XX QC-Standard dies ( per dim.) 32-10/32-69 9060-32-XXM Marking dies ( per dim.) 32-14/32-69 9060-3X-XXM Stamp engraving - logo, digits, letters Accessories to P32 9062-00-04 QC-stand P32/P50, incl. QC-tool, excl. dies 9060-00-01 Mechanical back stop P32 MS 9062-00-06 QC-bytestool P32

g die

in Mark

P50 excl. dies 9062-01-50 P50 MS swaging 3/16"-2" 9062-02-50

P50 IS swaging 3/16"-2"

9062-03-50

P50 AS swaging 3/16"-2"

9062-04-50

P50 VS swaging 3/16"-2"

Swaging dies P50 9060-32-XX QC-Standard dies ( per dim.) 32-10/32-69 9060-32-XXM Marking dies ( per dim.) 32-14/32-69 9060-3X-XXM Stamp engraving - logo, digits, letters Accessories to P50 9062-00-04 QC-stand P32/P50, incl. QC-tool, excl. dies 9060-50-01 Mechanical backstopp P50 9062-00-06 QC-bytestool P50

286

s

g die

gin Swa

PRODUCT CATALOGUE 2005


PRODUCT GROUP 900

SWAGING MACHINES

0

0

FP 2

5

P 16

P 12

F 10 FP 1

40

FP 1

FP

-F 160

FP Ragne of swaging machines The ”heavy” FP-serie consists of microprocessor controlled swages with a memory function. The swaging machines are developed to give an exact swaging result, a high swage power and a quick reaction time. The FP-serie are excellent for mutiple production. All models are equiped with QC-system for an extra quick die change. FP20 incl. QC-tool, excl. dies 9061-50-20 FP20 IS swage 3/16"- 1 1/4"

FP120 incl. QC-tool, excl. dies 9061-11-20 FP120 IS swage 3/16"-2"

FP160 excl. dies 9061-11-60 FP160 IS swage 3/16"-6"

9061-51-20

FP20 AS swage 3/16"- 1 1/4"

9061-11-21

FP120 AS swage 3/16"-2"

9061-11-61

FP160 AS swage 3/16"-6"

9061-52-20

FP20 VS swage 3/16"- 1 1/4"

9061-21-20

FP120 VS swage 3/16"-2"

9061-21-60

FP160 VS swage 3/16"-6"

FP110 incl. QC-tool, excl. dies 9061-11-10 FP110 IS swage 3/16"-2"

FP120S incl. QC-tool, excl. dies 9061-41-20 FP120S IS swage 3/16"-2"

FP165 excl. dies 9061-61-65 FP165 IS swage 3/16"-6"

9061-11-11

FP110 AS swage 3/16"-2"

9061-41-21

FP120S AS swage 3/16"-2"

9061-61-66

FP165 AS swage 3/16"-6"

9061-21-10

FP110 VS swage 3/16"-2"

9061-41-22

FP120S VS swage 3/16"-2"

9061-61-60

FP165 VS swage 3/16"-6"

FP140 incl. QC-tool, excl. dies 9061-42-20 FP140 IS swage 3/16"-2" 9061-42-21

FP140 AS swage 3/16"-2"

9061-42-22

FP140 VS swage 3/16"-2"

Swaging dies FP-machines 9060-32-XX QC-Standard dies ( per dim.) 32-10/32-69 9060-32-XXM Marking dies ( per dim.) 32-14/32-69 9060-3X-XXM Stamp engraving - logo, digits, letters 9061-01-63 Adapter set for 3/16"- 2" dies FP160/FP165 9061-01-XX Special dies 2" - 6" (per dim.) FP160/FP165 Accessories to FP-machines 9062-00-06 QC-changing tool FP-machines

9

PRODUCT CATALOGUE 2005

287


MACHINES, ACCESSORIES

PRODUCT GROUP 900

HAC P20/P32 A workbench for all needs. Hose Assembly Centre, the complete hose mounting workshop, equiped with all that you need for a safe and professional hose mounting. It can be delivered with hose reel, hose cutting machine, skiving machine, hose swage marking machine, cleaning equipment and all the neccessary accessories.

HoseReel 1 / HoseReel 7 Hose reel for one or many hoses. Hose Reel 1 simplifies the hose handling remarkbly, and can be used for hoses with dimension from 1/8” to 4”. With HoseReel 7 you can save a lot of time since the most common hose types are always avaliable. All baskets (exept from the bottom basket) can be swung out horizontally, so a new roll can easily be placed in the basket easily. HoseReel 7 is suitable for hoses with dimension from 3/16” to 1 1/4”. 9004-00-03 9004-00-07

HoseReel 1, hose reel HoseReel 7, hose reel

AutoReel V / AotoReel H A motorized hose reel with a stepless speed control for an easy hose reeling. Ideal for long hoses. Can easily be combined with HoseReel 1, for a easier handling. AutoReel V is designed for hoses with dimension from 1/8” to 1 1/4”. AutoReel H is suitable for hoses with dimension from 1/8” to 2”. 9004-02-03 9004-01-03

288

AutoReel V, hose reel AutoReel H, hose reel

PRODUCT CATALOGUE 2005


PRODUCT GROUP 900

MACHINES, ACCESSORIES

MarkMan A manual or pneumatic machine for marking of ferrules (before swaging). The marking machine can be used on any hose ferrule with dimension 3/16” to 2”. The type holder can be provided with 2 or 3 text rows alt. with a complete 8-digit marking wheel. Marking machines 9031-10-01 MarkMan II-M, manual marking machine excl. types/holders 9031-10-02 MarkMan II-P, pneumatic marking machine excl. types/holders 9031-10-03 Type holders 2 (2 rows, 4mm) 9031-10-04 Type holders 3 (3 rows, 4mm) 9031-11-03 Type holders 2 (2 rows, 3mm) 9031-11-04 Type holders 3 (3 rows, 3mm) 9031-10-07 Type holders special (2-3 rows, spec.) acc. to customer request 9031-10-05 QC-adapter to type holders HSAM 4 9031-00-04 Etui kit 4mm with types, suitable for 9031-10-03/04 9031-12-04 Etui kit 3mm with types, suitalbe for 9031-11-03/04 9031-00-06 Marking wheel AM 4-8 wheel 9031-10-06 QC-adapter to marking wheel AM 4-8

Swaging mandrels To control that the swaging has resulted in the right internal collapse. GO-side should pass through the fitting to make sure that the swaging is not overdone, whilst the STOP-side should stop in the middle of the tail to insure that the swaging is sufficient. Swaging mandrels 9011-00-03 Swaging mandrels X/3000-serie fittings 9011-00-04 Swaging mandrels X/3000-serie fittings 9011-00-05 Swaging mandrels X/3000-serie fittings 9011-00-06 Swaging mandrels X/3000-serie fittings 9011-00-08 Swaging mandrels X/3000-serie fittings 9011-00-10 Swaging mandrels X/3000-serie fittings 9011-00-12 Swaging mandrels X/3000-serie fittings 9011-00-16 Swaging mandrels X/3000-serie fittings 9011-00-20 Swaging mandrels X/3000-serie fittings 9011-00-24 Swaging mandrels X/3000-serie fittings 9011-00-32 Swaging mandrels X/3000-serie fittings 9012-00-04 9012-00-06 9012-00-08 9012-00-10 9012-00-12 9012-00-16 9012-00-20 9012-00-24 9012-00-32

Swaging mandrels H/4000-serie fittings Swaging mandrels H/4000-serie fittings Swaging mandrels H/4000-serie fittings Swaging mandrels H/4000-serie fittings Swaging mandrels H/4000-serie fittings Swaging mandrels H/4000-serie fittings Swaging mandrels H/4000-serie fittings Swaging mandrels H/4000-serie fittings Swaging mandrels H/4000-serie fittings

9013-00-04 9013-00-06 9013-00-08 9013-00-10 9013-00-12 9013-00-16 9013-00-20 9013-00-24 9013-00-32

Swaging mandrels IL/4400-serie fittings Swaging mandrels IL/4400-serie fittings Swaging mandrels IL/4400-serie fittings Swaging mandrels IL/4400-serie fittings Swaging mandrels IL/4400-serie fittings Swaging mandrels IL/4400-serie fittings Swaging mandrels IL/4400-serie fittings Swaging mandrels IL/4400-serie fittings Swaging mandrels IL/4400-serie fittings

9014-00-06 9014-00-08 9014-00-10 9014-00-12 9014-00-16

Swaging mandrels IL-BL/4500-serie fittings Swaging mandrels IL-BL/4500-serie fittings Swaging mandrels IL-BL/4500-serie fittings Swaging mandrels IL-BL/4500-serie fittings Swaging mandrels IL-BL/4500-serie fittings

PRODUCT CATALOGUE 2005

Swaging mandrels For 4200- series 9015-00-03 9015-00-04 9015-00-05 9015-00-06 9015-00-08 9015-00-10 9015-00-12 9015-00-16 9015-00-20 9015-00-24 9015-00-32

Swaging mandrels X/4200-serie fittings Swaging mandrels X/4200-serie fittings Swaging mandrels X/4200-serie fittings Swaging mandrels X/4200-serie fittings Swaging mandrels X/4200-serie fittings Swaging mandrels X/4200-serie fittings Swaging mandrels X/4200-serie fittings Swaging mandrels X/4200-serie fittings Swaging mandrels X/4200-serie fittings Swaging mandrels X/4200-serie fittings Swaging mandrels X/4200-serie fittings

9

289


MACHINES, ACCESSORIES

E-Cleaner For a quick and simple cleaning of all sorts of hose and pipe. The system uses a foam rubber plug that gets shot in through the hose/tube with compressed air. Nozzles are avaliable with a dimension from 3/16â&#x20AC;? to 2â&#x20AC;? and for tubes with dimension from 4 mm. to 60mm. We also have a more simple model in which the hose/tube is cleaned only with air pressure. E-Cleaner mini 9035-00-00 E-Cleaner mini 4030 compl. case with 8 hose nozzles optional 9035-00-01 E-Cleaner mini 4060 compl. case with 8 tube nozzles optional 9035-01-01 E-Cleaner mini 4010 pistol excl. nozzle Nozzle, hose 9035-02-03 E-Cleaner mini hose nozzles 3/16" 9035-02-04 E-Cleaner mini hose nozzles 1/4" 9035-02-05 E-Cleaner mini hose nozzles 5/16" 9035-02-06 E-Cleaner mini hose nozzles 3/8" 9035-02-08 E-Cleaner mini hose nozzles 1/2" 9035-02-10 E-Cleaner mini hose nozzles 5/8" 9035-02-12 E-Cleaner mini hose nozzles 3/4" 9035-02-16 E-Cleaner mini hose nozzles 1" Nozzle, tube 9035-06-03 E-Cleaner mini tube nozzles 6x1,5 9035-06-04 E-Cleaner mini tube nozzles 6x1 9035-08-05 E-Cleaner mini tube nozzles 8x1,5 9035-10-05 E-Cleaner mini tube nozzles 10x2.5 9035-10-07 E-Cleaner mini tube nozzles 10x1.5 9035-12-06 E-Cleaner mini tube nozzles 12x3 9035-12-08 E-Cleaner mini tube nozzles 12x2 9035-12-09 E-Cleaner mini tube nozzles 12x1,5 9035-14-09 E-Cleaner mini tube nozzles 14x2,5 9035-15-11 E-Cleaner mini tube nozzles 15x2 9035-15-12 E-Cleaner mini tube nozzles 15x1,5 9035-16-10 E-Cleaner mini tube nozzles 16x3 9035-16-12 E-Cleaner mini tube nozzles 16x2 9035-18-14 E-Cleaner mini tube nozzles 18x2 9035-18-15 E-Cleaner mini tube nozzles 18x1,5 9035-20-12 E-Cleaner mini tube nozzles 20x4 9035-20-14 E-Cleaner mini tube nozzles 20x3 9035-20-16 E-Cleaner mini tube nozzles 20x2 9035-22-16 E-Cleaner mini tube nozzles 22x3 9035-22-18 E-Cleaner mini tube nozzles 22x2 9035-22-19 E-Cleaner mini tube nozzles 22x1,5 9035-25-15 E-Cleaner mini tube nozzles 25x5 9035-25-19 E-Cleaner mini tube nozzles 25x3 9035-28-22 E-Cleaner mini tube nozzles 28x3 9035-28-24 E-Cleaner mini tube nozzles 28x2 9035-30-20 E-Cleaner mini tube nozzles 30x5 9035-30-24 E-Cleaner mini tube nozzles 30x3 9035-XX-XX E-Cleaner tube nozzles mini, special dim.

290

PRODUCT GROUP 900

E-Cleaner maxi 9033-00-00 E-Cleaner maxi 2030 compl. case with 9 optional hose nozzles 9033-00-01 E-Cleaner maxi 2010 pistol excl. nozzle 9033-00-25 Bench holder 2050 9034-00-00 E-Cleaner maxi 2060 compl. case with 9 optional tube nozzles Nozzle, hose 9033-02-03 E-Cleaner maxi hose nozzles 3/16" 9033-02-04 E-Cleaner maxi hose nozzles 1/4" 9033-02-05 E-Cleaner maxi hose nozzles 5/16" 9033-02-06 E-Cleaner maxi hose nozzles 3/8" 9033-02-08 E-Cleaner maxi hose nozzles 1/2" 9033-02-10 E-Cleaner maxi hose nozzles 5/8" 9033-02-12 E-Cleaner maxi hose nozzles 3/4" 9033-02-16 E-Cleaner maxi hose nozzles 1" 9033-02-20 E-Cleaner maxi hose nozzles 1 1/4" 9033-02-24 E-Cleaner maxi hose nozzles 1 1/2" 9033-02-32 E-Cleaner maxi hose nozzles 2" Nozzle, tube 9033-03-00 E-Cleaner 3000 Adapter ring for tube nozzles t.o.m. 38 mm. 9034-04-03 E-Cleaner maxi tube nozzles 4x 0,75 spec. 9034-05-03 E-Cleaner maxi tube nozzles 5x1 9034-06-02 E-Cleaner maxi tube nozzles 6x2 9034-06-03 E-Cleaner maxi tube nozzles 6x1,5 9034-06-04 E-Cleaner maxi tube nozzles 6x1 9034-08-05 E-Cleaner maxi tube nozzles 8x1,5 9034-08-06 E-Cleaner maxi tube nozzles 8x2,5 9034-10-05 E-Cleaner maxi tube nozzles 10x2.5 9034-10-07 E-Cleaner maxi tube nozzles 10x1.5 9034-12-06 E-Cleaner maxi tube nozzles 12x3 9034-12-08 E-Cleaner maxi tube nozzles 12x2 9034-12-09 E-Cleaner maxi tube nozzles 12x1,5 9034-14-07 E-Cleaner maxi tube nozzles 14x3,5 9034-14-09 E-Cleaner maxi tube nozzles 14x2,5 9034-15-11 E-Cleaner maxi tube nozzles 15x2 9034-16-10 E-Cleaner maxi tube nozzles 16x3 9034-16-12 E-Cleaner maxi tube nozzles 16x2 9034-18-13 E-Cleaner maxi tube nozzles 18x2,5 9034-18-14 E-Cleaner maxi tube nozzles 18x2 9034-18-15 E-Cleaner maxi tube nozzles 18x1,5 9034-20-12 E-Cleaner maxi tube nozzles 20x4 9034-20-14 E-Cleaner maxi tube nozzles 20x3 9034-22-16 E-Cleaner maxi tube nozzles 22x3 9034-22-18 E-Cleaner maxi tube nozzles 22x2 9034-25-15 E-Cleaner maxi tube nozzles 25x5 9034-25-19 E-Cleaner maxi tube nozzles 25x3 9034-28-18 E-Cleaner maxi tube nozzles 28x5 9034-28-22 E-Cleaner maxi tube nozzles 28x3 9034-28-24 E-Cleaner maxi tube nozzles 28x2 9034-30-20 E-Cleaner maxi tube nozzles 30x5 9034-30-24 E-Cleaner maxi tube nozzles 30x3 9034-35-29 E-Cleaner maxi tube nozzles 35x3 9034-35-31 E-Cleaner maxi tube nozzles 35x2 9034-38-28 E-Cleaner maxi tube nozzles 38x5 9034-38-30 E-Cleaner maxi tube nozzles 38x4 9034-38-32 E-Cleaner maxi tube nozzles 38x3 9034-42-34 E-Cleaner maxi tube nozzles 42x4 9034-42-36 E-Cleaner maxi tube nozzles 42x3 9034-42-38 E-Cleaner maxi tube nozzles 42x2 9034-50-38 E-Cleaner maxi tube nozzles 50x6 9034-50-40 E-Cleaner maxi tube nozzles 50x5 9034-50-44 E-Cleaner maxi tube nozzles 50x3 9034-60-50 E-Cleaner maxi tube nozzles 60x50 9034-xx-xx E-Cleaner maxi tube nozzles, special manuf. Max. 60 mm.

PRODUCT CATALOGUE 2005


PRODUCT GROUP 900

E-Cleaner system Cobra 9034-90-00 E-Cleaner Cobra, semi-automatic pistol for 3/16" - 2" Nozzle, hose 9034-90-03 E-Cleaner Cobra hose nozzle 3/16" 9034-90-04 E-Cleaner Cobra hose nozzle 1/4" 9034-90-05 E-Cleaner Cobra hose nozzle 5/16" 9034-90-06 E-Cleaner Cobra hose nozzle 3/8" 9034-90-08 E-Cleaner Cobra hose nozzle 1/2" 9034-90-10 E-Cleaner Cobra hose nozzle 5/8" 9034-90-12 E-Cleaner Cobra hose nozzle 3/4" 9034-90-16 E-Cleaner Cobra hose nozzle 1" 9034-90-20 E-Cleaner Cobra hose nozzle 1 1/4" 9034-90-24 E-Cleaner Cobra hose nozzle 1 1/2" 9034-90-32 E-Cleaner Cobra hose nozzle 2" E-Cleaner system 2000 SA 9034-92-00 E-Cleaner 2000 SA, semi-automatic machine for 3/16" - 2" Nozzle, hose 9033-02-03 E-Cleaner 2000 SA hose nozzle 3/16" 9033-02-04 E-Cleaner 2000 SA hose nozzle 1/4" 9033-02-05 E-Cleaner 2000 SA hose nozzle 5/16" 9033-02-06 E-Cleaner 2000 SA hose nozzle 3/8" 9033-02-08 E-Cleaner 2000 SA hose nozzle 1/2" 9033-02-10 E-Cleaner 2000 SA hose nozzle 5/8" 9033-02-12 E-Cleaner 2000 SA hose nozzle 3/4" 9033-02-16 E-Cleaner 2000 SA hose nozzle 1" 9033-02-20 E-Cleaner 2000 SA hose nozzle 1 1/4" 9033-02-24 E-Cleaner 2000 SA hose nozzle 1 1/2" 9033-02-32 E-Cleaner 2000 SA hose nozzle 2" E-Cleaner system BIG BANG for tube 9034-94-00 E-Cleaner system BIG BANG for 2 1/2" - 6" tube, tube nozzles on request

MACHINES, ACCESSORIES

Plugg, hose 9032-02-03 9032-02-04 9032-02-05 9032-02-06 9032-02-08 9032-02-10 9032-02-12 9032-02-16 9032-02-20 9032-02-24 9032-02-32 Plugg, tube 9032-01-04 9032-01-05 9032-01-07 9032-01-08 9032-01-09 9032-01-10 9032-01-12 9032-01-14 9032-01-16 9032-01-18 9032-01-20 9032-01-22 9032-01-25 9032-01-26 9032-01-28 9032-01-30 9032-01-33 9032-01-35 9032-01-38 9032-01-40 9032-01-45 9032-01-48 9032-01-50 9032-01-55 9032-01-60 9032-01-65

E-Cleaner plugg for hose diam. E-Cleaner plugg for hose diam. E-Cleaner plugg for hose diam. E-Cleaner plugg for hose diam. E-Cleaner plugg for hose diam. E-Cleaner plugg for hose diam. E-Cleaner plugg for hose diam. E-Cleaner plugg for hose diam. E-Cleaner plugg for hose diam. E-Cleaner plugg for hose diam. E-Cleaner plugg for hose diam. E-Cleaner plugg for tube, inv. diam. E-Cleaner plugg for tube, inv. diam. E-Cleaner plugg for tube, inv. diam. E-Cleaner plugg for tube, inv. diam. E-Cleaner plugg for tube, inv. diam. E-Cleaner plugg for tube, inv. diam. E-Cleaner plugg for tube, inv. diam. E-Cleaner plugg for tube, inv. diam. E-Cleaner plugg for tube, inv. diam. E-Cleaner plugg for tube, inv. diam. E-Cleaner plugg for tube, inv. diam. E-Cleaner plugg for tube, inv. diam. E-Cleaner plugg for tube, inv. diam. E-Cleaner plugg for tube, inv. diam. E-Cleaner plugg for tube, inv. diam. E-Cleaner plugg for tube, inv. diam. E-Cleaner plugg for tube, inv. diam. E-Cleaner plugg for tube, inv. diam. E-Cleaner plugg for tube, inv. diam. E-Cleaner plugg for tube, inv. diam. E-Cleaner plugg for tube, inv. diam. E-Cleaner plugg for tube, inv. diam. E-Cleaner plugg for tube, inv. diam. E-Cleaner plugg for tube, inv. diam. E-Cleaner plugg for tube, inv. diam. E-Cleaner plugg for tube, inv. diam.

3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2" 2" 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10-11mm 12mm 13-14mm 15mm 16-17mm 18mm 19mm 20-21mm 22-23mm 24-25mm 26-27mm 28mm 29-31mm 32-35mm 34-37mm 36-40mm 41-45mm 46-50mm 51-55mm

MaxiClean 5-32 A new PLC controlled cleaning machine for tube and hose with dimension 3/16” to 1 1/4”. The machine is extremly easy to use. The hose or the tube is cleaned with a waterbased fluid in a temperatur between +55°C - 70°C, to reach a certain clean level equvalent to ISO 16/12. Cleaning machines 9087-00-00 MaxiClean 5-32, computerized cleaning machine for 1 hose/tube at a time. 9087-02-00 MaxiClean 5-32, computerized cleaning machine for 2 hoses/tubes at a time.

PRODUCT CATALOGUE 2005

9

291


TUBE BENDING MACHINES

PRODUCT GROUP 900

MEGA BENDER 030

TOP BENDER 050

Maximum capacity 70x4mm

Maximum capacity 60x4mm

9040-01-30

9040-01-50

P.A.

P.A.

SUPER BENDER 060A

MEDI BENDER MB 042P

Maximum capacity 50x4mm

Maximum capacity 42x4mm

9040-01-60

9040-01-43

P.A.

P.A.

MEDI BENDER 070

MINI BENDER 092

Maximum capacity 35x3mm

Maximum capacity 28x1,5mm

9040-01-70

9040-01-92

P.A.

P.A.

MAXIMUM BENDING CAPACITY FOR MACHINES WITHOUT MANDREL Part number

1/30/40

9040-01-50

9040-01-60

9040-01-43

9040-01-70

9040-01-92

9040-01-80

030 MEGA

050 TOP

060A SUPER

MB42P

070 MEDI

092 MINI

JOLLY

Gas tube (inch)

2 1/2”

2”

1 1/2”

1 1/4”

1”

3/4”

1/2”

Mild steel (mm)

76x4

60x4

48x3,5

42x3,5

35x2,5

28x1,5

22x3

Hydraulic tube ST35/ST37

70x5

60x4

50x4

42x3

35x3

28x1,5

22x3

Furniture pipe

70x4

60x4

54x1,5

42x4

38x1,5

28x1,5

22x1,5

Stainless 304-308-316

76x3

60x2,5

48x2,5

42x3,5

30x2

28x1,5

22x1,5

Hard cupper & Aluminium

76x3

60x4

64x2

42x2,5

42x1,5

35x1,5

Alu.22x1,5

Solid pole mild steel ST37

45x

35

32

54x2

20

10

-

Solid flat steel ST37 (mm)

120x12

12x10

120x10

-

-

-

-

Solid square steel ST37 (mm)

40x40

30x30

30x30

35x35

-

-

-

Model

292

PRODUCT CATALOGUE 2005


Hydroscand Stainless steel components Stainless steel fluid connectors for hydraulics and pneumatics in corrosive enviroments and aggressive media.

Table of contents

Material according to SS 2343/AISI 316. Hydroscand stainless steel connectors are designed for stainless steel enviroments: chemical industry, marine industry, food and beverage industry.

Swage fittings page 4200-01-S 4200-02-S 4200-04-S 4200-15-S 4200-26-S 4200-30-S 4201-2S 4202-S 4203-2S 4204-2S 4213-S 4214-S 4216-S 4217-S 4220-S 4223-S 4226-S 4227-S 4244-S 4240-S 4270-2S 4271-2S 4272-2S 4273-2S 4274-2S 4275-2S

EN1SN 2SC Ferrules EN2SN Ferrules EN2SN Ferrules R7/R8 Ferrules Ferrules P.T.F.E. / Teflon smooth Ferrules P.T.F.E. / Teflon G-threaded straight, slip-on nut G-threaded straight G-threaded 90° bend, slip-on nut G-threaded 45° bend slip-on nut Unified-threaded straight crimped nut Unified-threaded straight Unified-threaded 90° bend crimped nut Unified-threaded 45° bend crimped nut M-threaded straight SKL M-threaded straight SKS Stand pipe straight Stand pipe 90° bend SAE Flange 90° bend NPTF-threaded straight M-threaded straight slip-on nut M-threaded 90° bend slip-on nut M-threaded 45° bend slip-on nut M-threaded straight slip-on nut M-threaded 90° bend slip-on nut M-threaded 45° bend slip-on nut

329 329 329 329 329 329 330 330 330 330 331 331 331 331 331 331 332 332 332 332 332 333 333 333 333 333

Industrial fittings page

Hydroscand reserves the right to modify any or all parts of this catalogue without any prior notice.

PRODUCT CATALOGUE 2009

5001-01 5001-02 5001-03 5001-04 5396-0

Claw coupling Claw coupling, male thread Claw coupling female thread Seal Normal weld plate

334 334 334 334 335

Accessories pipe clamps page

5396-3 5398 5396-2 5396-1 5396-7 5397-0 5397-3 5397-2

Inline weld plate Wear rail with accessories Double weld plate Weld plate, Long Sectional plate Cap head bolt for washer Hexagon bolt for sectional plate Stacking bolt

Hose clamps page

5561-10 5565-20 5563 5564 5566-20 5601-03 5601-04

Hose clamp mini Hose clamp Hose clamp Hose clamp Hose clamp Rubber steel bonded washer Rubber steel bonded washer

335 335 335 335 335 335 335 335

336 336 336 336 336 337 337

327

10


Hydroscand Stainless steel components Table of contents

Quick release fittings page

5558-94 5Txx

Faster HNV/INOX ISO B TEMA T series

Cutting ring fittings page

2603 2606 2803 2806 2607 2609 2611 2613 2617 2621 2623 2641 2642 2643 2644 2645 2646 2647 2650 2660 2670 2689 2701 2703 2704 2705 2707 2907 2721 2720 2723 2727 2730 2747 2749 2750

GE – GB Straight fitting – G M GE – MB Straight fitting – M M GE – GB Straight fitting – G M GE – MB Straight fitting – M M GE – NPT Straight fitting – NPT M GE – G/ED Straight fitting – G M WE – R/C 90° elbow fitting – R M WE – GB 90° elbow fitting – G M WE – NPT 90° elbow fitting NPT TE – R/C T-fitting – R M TE – GB T-fitting – G M G Straight joint fitting W Elbow joint fitting T T-Joint fitting K Cross joint fitting SV Bulkhead connection WSV Elbow bulkhead connection AS Straight welding boss EVW Adjustable elbow fitting EVT Adjustable T-fitting EVL Adjustable L-fitting EVGE–ED Straight fitting GAI – G Straight fitting – G F MAV – G Manometer – fitting MAV – EV – G Manometer RED Reduction – fitting KOR – L Reduction KOR – S Reduction RHV – G – ED Non-return valve RHD Non-return valve RHZ – G – ED Non-return valve RHDINon-return valve PL Plug VH Reinforcing ring D Cutting ring M Nut

Adaptors page

7802 7805 7807 7808 7809 7810 7811 7812 7813 7822 7831 7835 7836 7851 7852 7853

Straight adaptor G M – G M Reduction adaptor G M – G F Swivel adaptor G FS – G FS Straight swivel G M – G FS Reduction adaptor G M – G F long Reduction adaptor G M – G F Short Straight bushing G F – G F Straight adaptor G M – R M Straight adaptor G F – JIC M Straight adaptor G M – NPT M Elbow 90° adaptor G M – G FS Swivel elbow 90° BendG M – G FS Elbow adaptor 90° G M – R M T-Adaptor G M – G M – G M T-Adaptor G FS – G FS – G FS T-Adaptor G M – G M – G FS

328

338 338

340 340 340 340 341 341 341 342 342 342 342 343 343 343 343 344 344 344 344 345 345 345 345 346 346 346 347 347 348 348 348 348 349 349 349 349

350 350 350 350 351 351 351 351 351 352 352 352 352 352 352 352

7854 7861 7861-10 7861-20 7863 7890

L-Adaptor G M – G FS – G M Plug G M Plug R M Plug R FS Inset plug G M BulkheadG M – G M

353 353 353 353 353 353

Flare fittings page 7901 7902 7903 7904 7911 7905 7913 7914 7920 7922 7923 7951 7960 7959 7961 7962 7963 7966 7967 7981 7970 7990 7991 7992 7993

J J J J J J J J J J J J J J J J J J J J J J J J J

G Straight joint fitting W Elbow joint fitting T T-joint fitting K Cross joint fitting GE Straight fitting – NPTF-thread SV Straight bulkhead GE Straight fitting – G-thread GE Straight fitting – UNF-thread WE elbow fitting – NPTF-thread WE Adjustable fitting – G-thread WE Adjustable fitting – UNF-thread GAI Straight fitting – G-thread EVW 90° Elbow fitting with JIC 37° GII Straight adaptor with JIC 37° EVU 45° Elbow fitting with JIC 37° EVT T-fitting with JIC 37° EVL L-fitting with JIC 37° EVGE Adaptor with JIC 37° G-thread EVGE Adaptor with JIC 37° UNF-thread MA Measurement connection KOR Reduction PLI Blind nut PLU Plug M Nut D Clamping sleeve

354 354 354 354 354 354 355 355 355 355 355 356 356 356 356 356 356 357 357 357 357 358 358 358 358

Ball valves page 8631 8632 8634 8641 8642 8690 8691

2-way 2-way 2-way 3-way 3-way 2-way 3-way

ball valve G-threaded, female ball valve SKL-connection ball valve SKS-connection reversing valve, L-drilled G-threaded reversing valve T-drilled G-threaded ball valve low pressure short thread ball valve low pressure L-drilled

359 359 359 359 359 359 359

Test points page

8301-90 8301-94 8301-95 8310 8311

Test points M 16 x 2 G-threaded Test points M 16 x 2 UNF-threaded Test points M 16 x 2 NPT-threaded Measurement hose M 16 x 2 – G 1/4" Measurement hose M 16 x 2 – 2

360 360 360 360 360

PRODUCT CATALOGUE 2009


Product group 380

STAINLESS STEEL SWAGE FITTINGS 4200-01-S

4200-15-S

EN1SN 2SC Ferrules

R7/R8 Ferrules

Skive / non skive Stainless steel Part number

Use with

4200-01-04-S 4200-01-06-S 4200-01-08-S 4200-01-10-S 4200-01-12-S 4200-01-16-S 4200-01-20-S 4200-01-24-S 4200-01-32-S

EN1SN, EN1SN, EN1SN, EN1SN, EN1SN, EN1SN, EN1SN, EN1SN, EN1SN,

2SC 2SC 2SC 2SC 2SC 2SC 2SC 2SC 2SC

Hose ID 1/4" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2" 2"

Non-skive. Stainless steel Part number

Use with

4200-15-03-S 4200-15-04-S 4200-15-06-S 4200-15-08-S 4200-15-12-S 4200-15-16-S

R7/R8 R7/R8 R7/R8 R7/R8 R7/R8 R7/R8

3/16" 1/4" 3/8" 1/2" 3/4" 1"

4200-02-S

4200-26-S

EN2SN Ferrules

Ferrules P.T.F.E. / Teflon smooth

Skive Stainless steel Part number

Use with

Hose ID

4200-02-03-S 4200-02-04-S 4200-02-06-S 4200-02-08-S 4200-02-10-S 4200-02-12-S 4200-02-16-S 4200-02-20-S 4200-02-24-S 4200-02-32-S

EN2SN EN2SN EN2SN EN2SN EN2SN EN2SN EN2SN EN2SN EN2SN EN2SN

3/16" 1/4" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2" 2"

Non-skive Part number

Use with

4200-26-03-S 4200-26-04-S 4200-26-05-S 4200-26-06-S 4200-26-08-S 4200-26-12-S 4200-26-16-S

P.T.F.E. P.T.F.E. P.T.F.E. P.T.F.E. P.T.F.E. P.T.F.E. P.T.F.E.

Hose ID

smooth smooth smooth smooth smooth smooth smooth

3/16" 1/4" 5/16" 3/8" 1/2" 3/4" 1"

4200-04-S

4200-30-S

EN2SN Ferrules

Ferrules P.T.F.E. / Teflon

Non skive Stainless steel Part number

Use with

Hose ID

4200-04-04-S 4200-04-06-S 4200-04-08-S 4200-04-10-S 4200-04-12-S 4200-04-16-S

EN2SN EN2SN EN2SN EN2SN EN2SN EN2SN

1/4" 3/8" 1/2" 5/8" 3/4" 1"

PRODUCT CATALOGUE 2009

Hose ID

Non-skive. Stainless steel Part number

Use with

4200-30-04-S 4200-30-06-S 4200-30-08-S 4200-30-10-S 4200-30-12-S 4200-30-16-S 4200-30-20-S 4200-30-24-S 4200-30-32-S

P.T.F.E. P.T.F.E. P.T.F.E. P.T.F.E. P.T.F.E. P.T.F.E. P.T.F.E. P.T.F.E. P.T.F.E.

wrapped wrapped wrapped wrapped wrapped wrapped wrapped wrapped wrapped

Hose ID 1/4" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2" 2"

329

10


product group 380

STAINLESS STEEL SWAGE FITTINGS

Part number 4201-04-04-2S 4201-06-06-2S 4201-08-06-2S 4201-08-08-2S 4201-10-10-S 4201-12-08-2S 4201-12-12-2S 4201-16-12-2S 4201-16-16-S 4201-20-20-2S 4201-24-24-S 4201-32-32-2S

4201-2S

4203-2S

G-threaded straight Slip-on nut

G-threaded 90° bend Slip-on nut

60° cone sealing. Stainless steel

60° cone sealing. Stainless steel

Thread G G G G G G G

1/4" 3/8" 1/2" 1/2" 5/8" 3/4" 3/4" G 1" G 1" G 1 1/4" G 1 1/2" G 2"

Type FS FS FS FS FS FS FS FS FS FS FS FS

Hose ID 1/4" 3/8" 3/8" 1/2" 5/8" 1/2" 3/4" 3/4" 1" 1 1/4" 1 1/2" 2"

Part number

Thread

Type

4203-04-04-2S 4203-06-06-2S 4203-08-06-2S 4203-08-08-2S 4203-10-10-S 4203-12-12-S 4203-16-16-S 4203-20-20-2S 4203-24-24-S 4203-32-32-2S

G G G G G G

90° 90° 90° 90° 90° 90° 90° 90° 90° 90°

1/4" 3/8" 1/2" 1/2" 5/8" 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

4204-2S

G-threaded straight

G-threaded 45° bend Slip-on nut

Part number

Thread

Type

4202-04-03-S 4202-04-04-S 4202-04-06-S 4202-06-04-S 4202-06-06-S 4202-06-08-S 4202-08-06-S 4202-08-08-S 4202-08-12-S 4202-10-10-S 4202-12-12-S 4202-16-12-S 4202-16-16-S 4202-20-20-S 4202-24-24-S 4202-32-32-S

G G G G G G G G G G G

M M M M M M M M M M M M M M M M

330

1/4" 3/8" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2" 2"

4202-S 60° cone sealing Stainless steel

1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 5/8" 3/4" G 1" G 1" G 1 1/4" G 1 1/2" G 2"

FS FS FS FS FS FS FS FS FS FS

Hose ID

Hose ID 3/16" 1/4" 3/8" 1/4" 3/8" 1/2" 3/8" 1/2" 3/4" 5/8" 3/4" 3/4" 1" 1 1/4" 1 1/2" 2"

60° cone sealing. Stainless steel Part number

Thread

Type

4204-04-04-2S 4204-06-06-2S 4204-08-08-2S 4204-12-12-2S 4204-16-16-S 4204-20-20-2S 4204-24-24-S 4204-32-32-2S

G G G G

45° 45° 45° 45° 45° 45° 45° 45°

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

FS FS FS FS FS FS FS FS

Hose ID 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"

PRODUCT CATALOGUE 2009


Product group 380

Part number 4213-07-03-S 4213-07-04-S 4213-08-04-S 4213-09-04-S 4213-09-06-S 4213-12-06-S 4213-12-08-S 4213-14-08-S 4213-14-10-S 4213-17-10-S 4213-17-12-S 4213-21-16-S 4213-26-20-S 4213-30-24-S

STAINLESS STEEL SWAGE FITTINGS 4213-S

4217-S

Unified-threaded straight Crimped nut

Unified-threaded 45° bend crimped nut

24° cone sealing. Stainless steel

24° cone sealing. Stainless steel

Thread 7/16" - 20 UNF 7/16" - 20 UNF 1/2" - 20 UNF 9/16" - 18 UNF 9/16" - 18 UNF 3/4" - 16 UNF 3/4" - 16 UNF 7/8" - 14 UNF 7/8" - 14 UNF 1 1/16" - 12 UN 1 1/16" - 12 UN 1 5/16" - 12 UN 1 5/8" - 12 UN 1 7/8" - 12 UN

Type JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC

Hose ID

FS FS FS FS FS FS FS FS FS FS FS FS FS FS

3/16" 1/4" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 5/8" 5/8" 3/4" 1" 1 1/4" 1 1/2"

Part number 4217-07-04-S 4217-08-04-S 4217-09-04-S 4217-09-06-S 4217-12-08-S 4217-14-08-S 4217-17-12-S 4217-21-16-S 4217-26-20-S

Thread 7/16" - 20 UNF 1/2" - 12 UNF 9/16" - 18 UNF 9/16" - 18 UNF 3/4" - 16 UNF 7/8" - 14 UNF 1 1/16" - 12 UN 1 5/16" - 12 UN 1 5/8" - 12 UN

24° cone sealing Stainless steel Part number 4214-07-04-S 4214-09-06-S 4214-12-06-S 4214-12-08-S 4214-14-08-S 4214-17-10-S 4214-17-12-S 4214-21-16-S 4214-30-20-S

Thread 7/16" - 20 UNF 9/16" - 18 UNF 3/4" - 16 UNF 3/4" - 16 UNF 7/8" - 14 UNF 1 1/16" - 12 UN 1 1/16" - 12 UN 1 5/16" - 12 UN 1 7/8" - 12 UN

Type JIC JIC JIC JIC JIC JIC JIC JIC JIC

M M M M M M M M M

Hose ID 1/4" 3/8" 3/8" 1/2" 1/2" 5/8" 3/4" 1" 1 1/4"

JIC JIC JIC JIC JIC JIC JIC JIC JIC

45° 45° 45° 45° 45° 45° 45° 45° 45°

Hose ID FS FS FS FS FS FS FS FS FS 1

1/4" 1/4" 1/4" 3/8" 1/2" 1/2" 3/4" 1" 1/4"

4220-S M-threaded straight SKL

4214-S Unified-threaded straight

Type

24° cone sealing. Stainless steel Part number 4220-12-04-S 4220-14-04-S 4220-16-06-S 4220-18-06-S 4220-22-08-S 4220-26-10-S 4220-30-12-S 4220-36-16-S 4220-45-20-S 4220-52-24-S

Thread M M M M M M M M M M

12 14 16 18 22 26 30 36 45 52

x x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

Pipe

Type

6 mm 8 mm 10 mm 12 mm 15 mm 18 mm 22 mm 28 mm 35 mm 42 mm

SKL SKL SKL SKL SKL SKL SKL SKL SKL SKL

Hose ID 1/4" 1/4" 3/8" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2"

4223-S M-threaded straight SKS

4216-S Unified-threaded 90° bend crimped nut 24° cone sealing. Stainless steel Part number 4216-07-04-S 4216-08-04-S 4216-09-04-S 4216-09-06-S 4216-12-08-S 4216-14-08-S 4216-17-10-S 4216-17-12-S 4216-21-16-S 4216-26-20-S 4216-30-24-S

Thread 7/16" - 20 UNF 1/2" - 12 UNF 9/16" - 18 UNF 9/16" - 18 UNF 3/4" - 16 UNF 7/8" - 14 UNF 1 1/16" - 12 UN 1 1/16" - 12 UN 1 5/16" - 12 UN 1 5/8" - 12 UN 1 7/8" - 12 UN

PRODUCT CATALOGUE 2009

Type JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC JIC

90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90°

Hose ID FS 1/4" FS 1/4" FS 1/4" FS 3/8" FS 1/2" FS 1/2" FS 5/8" FS 3/4" FS 1" FS 1 1/4" FS 1 1/2"

24° cone sealing. Stainless steel Part number 4223-14-04-S 4223-16-04-S 4223-18-04-S 4223-18-06-S 4223-20-06-S 4223-24-08-S 4223-30-10-S 4223-36-12-S 4223-36-16-S 4223-42-16-S 4223-52-20-S

Thread M M M M M M M M M M M

14 16 18 18 20 24 30 36 36 42 52

x x x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

Pipe

Type

Hose ID

6 mm 8 mm 10 mm 10 mm 12 mm 16 mm 20 mm 25 mm 25 mm 30 mm 38 mm

SKS SKS SKS SKS SKS SKS SKS SKS SKS SKS SKS

1/4" 1/4" 1/4" 3/8" 3/8" 1/2" 5/8" 3/4" 1" 1" 1 1/4"

10

331


product group 380

STAINLESS STEEL SWAGE FITTINGS

4240-S

4226-S

NPTF-threaded straight

Stand pipe straight

Coned thread and 60° cone sealing Stainless steel

Stainless steel Part number 4226-06-03-S 4226-06-04-S 4226-08-03-S 4226-08-04-S 4226-10-04-S 4226-10-06-S 4226-12-06-S 4226-12-08-S 4226-14-06-S 4226-15-06-S 4226-15-08-S 4226-16-08-S 4226-18-08-S 4226-18-10-S 4226-20-10-S 4226-20-12-S 4226-22-12-S 4226-25-12-S 4226-28-16-S 4226-30-16-S 4226-35-20-S 4226-38-20-S 4226-42-24-S

Pipe Ø 6 6 8 8 10 10 12 12 14 15 15 16 18 18 20 20 22 25 28 30 35 38 42

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Type SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP

Hose ID 3/16" 1/4" 3/16" 1/4" 1/4" 3/8" 3/8" 1/2" 3/8" 3/8" 1/2" 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" 3/4" 1" 1" 1 1/4" 1 1/4" 1 1/2"

Part number

Thread

4240-04-04-S 4240-06-06-S 4240-08-08-S 4240-12-12-S 4240-16-16-S

1/4" -18 3/8" -18 1/2" -14 3/4" -14 1" -11½

NPTF NPTF NPTF NPTF NPTF

4227-06-04-S 4227-08-04-S 4227-10-04-S 4227-10-06-S 4227-12-06-S 4227-15-08-S 4227-18-08-S

332

6 8 10 10 12 15 18

mm mm mm mm mm mm mm

SP SP SP SP SP SP SP

90° 90° 90° 90° 90° 90° 90°

Hose ID 1/4" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2"

1/4" 3/8" 1/2" 3/4" 1"

Code 61 Stainless steel Part number

Flange size

Type

3/4" 1" 1 1/4" 1 1/2"

SAE3 SAE3 SAE3 SAE3

4244-12-12-S 4244-16-16-S 4244-20-20-S 4244-24-24-S

Hose ID 90° 90° 90° 90°

3/4" 3/4" 1 1/4" 1 1/2"

4270-2S M-threaded straight slip-on nut

Stainless steel Type

M M M M M

SAE Flange 90° bend

Stand pipe 90° bend

Pipe Ø

Hose ID

4244-S

4227-S

Part number

Type

24° cone sealing with O-ring. Stainless steel Part number 4270-06-04-2S 4270-08-04-2S 4270-10-04-2S 4270-10-06-2S 4270-12-04-2S 4270-12-06-2S 4270-15-08-2S 4270-18-08-2S 4270-18-10-2S 4270-22-12-2S 4270-28-16-2S 4270-35-20-2S 4270-42-24-2S

Thread M M M M M M M M M M M M M

12 14 16 16 18 18 22 26 26 30 36 45 52

x x x x x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

6 8 10 10 12 12 15 18 18 22 28 35 42

Pipe

Type Hose ID

mm mm mm mm mm mm mm mm mm mm mm mm mm

DKLO 1/4" DKLO 1/4" DKLO 1/4" DKLO 3/8" DKLO 1/4" DKLO 3/8" DKLO 1/2" DKLO 1/2" DKLO 5/8" DKLO 3/4" DKLO 1" DKLO 1 1/4" DKLO 1 1/2"

PRODUCT CATALOGUE 2009


Product group 380

STAINLESS STEEL SWAGE FITTINGS 4271-2S

4274-2S

M-threaded 90° bend slip-on nut

M-threaded 90° bend slip-on nut

24° cone sealing with O-ring stainless steel

24° cone sealing with O-ring Stainless steel

Part number

Thread

4271-06-04-2S 4271-08-04-2S 4271-10-04-2S 4271-10-06-2S 4271-12-06-2S 4271-15-08-2S 4271-18-08-2S 4271-18-10-2S 4271-22-12-2S 4271-28-16-2S 4271-35-20-2S 4271-42-24-2S

M M M M M M M M M M M M

12 14 16 16 18 22 26 26 30 36 45 52

x x x x x x x x x x x x

Pipe Type

1.5 6 1.5 8 1.5 10 1.5 10 1.5 12 1.5 15 1.5 18 1.5 18 2.0 22 2.0 28 2.0 35 2.0 42

mm mm mm mm mm mm mm mm mm mm mm mm

DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO DKLO

Hose ID 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 90° 1 90° 1

1/4" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 5/8" 3/4" 1" 1/4" 1/2"

Part number

Thread

4274-08-04-2S 4274-10-04-2S 4274-10-06-2S 4274-12-06-2S 4274-14-06-2S 4274-16-08-2S 4274-20-10-2S 4274-20-12-2S 4274-25-12-2S 4274-25-16-2S 4274-30-16-2S 4274-38-20-2S

M M M M M M M M M M M M

16 18 18 20 22 24 30 30 36 36 42 52

x x x x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0 2.0 2.0

Pipe Type 8 10 10 12 14 16 20 20 25 25 30 38

mm mm mm mm mm mm mm mm mm mm mm mm

DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO

Hose ID 90° 1/4" 90° 1/4" 90° 3/8" 90° 3/8" 90° 3/8" 90° 1/2" 90° 5/8" 90° 3/4" 90° 3/4" 90° 1" 90° 1" 90° 1 1/4"

4272-2S

4275-2S

M-threaded 45° bend slip-on nut

M-threaded 45° bend slip-on nut

24° cone sealing with O-ring Stainless steel

24° cone sealing with O-ring Stainless steel

Part number

Thread

4272-08-04-2S 4272-12-06-2S 4272-15-08-2S 4272-18-10-2S 4272-22-12-2S 4272-28-16-2S 4272-35-20-2S

M M M M M M M

14 18 22 26 30 36 45

x x x x x x x

1.5 1.5 1.5 1.5 2.0 2.0 2.0

Pipe Type 8 12 15 18 22 28 35

mm mm mm mm mm mm mm

DKLO DKLO DKLO DKLO DKLO DKLO DKLO

Hose ID 45° 45° 45° 45° 45° 45° 45° 1

1/4" 3/8" 1/2" 5/8" 3/4" 1" 1/4"

Part number 4275-10-04-2S 4275-12-06-2S 4275-14-06-2S 4275-16-08-2S 4275-20-10-2S 4275-25-12-2S 4275-30-16-2S 4275-38-20-2S

Thread M M M M M M M M

18 20 22 24 30 36 42 52

x x x x x x x x

1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

Pipe Type 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm

DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO

Hose ID 45° 1/4" 45° 3/8" 45° 3/8" 45° 1/2" 45° 5/8" 45° 3/4" 45° 1" 45° 1 1/4"

4273-2S M-threaded straight slip-on nut 24° cone sealing with O-ring. Stainless steel Part number 4273-06-04-2S 4273-08-04-2S 4273-10-04-2S 4273-10-06-2S 4273-12-04-2S 4273-12-06-2S 4273-14-06-2S 4273-16-06-2S 4273-16-08-2S 4273-20-10-2S 4273-20-12-2S 4273-25-12-2S 4273-25-16-2S 4273-30-16-2S 4273-38-20-2S

Thread M M M M M M M M M M M M M M M

14 16 18 18 20 20 22 24 24 30 30 36 36 42 52

x x x x x x x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0 2.0 2.0

PRODUCT CATALOGUE 2009

Pipe Type Hose ID 6 8 10 10 12 12 14 16 16 20 20 25 25 30 38

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO DKSO 1

1/4" 1/4" 1/4" 3/8" 1/4" 3/8" 3/8" 3/8" 1/2" 5/8" 3/4" 3/4" 1" 1" 1/4"

10

333


INDUSTRIAL STAINLESS STEEL FITTINGS

product group 501

5001-01

5001-03

Claw coupling

Claw coupling female thread

For hose Part number

Type

5001-01-06 5001-01-08 5001-01-12 5001-01-16

Claw Claw Claw Claw

Part number

Type

5001-02-06 5001-02-08 5001-02-12 5001-02-16

Claw Claw Claw Claw

334

coupling coupling coupling coupling

coupling coupling coupling coupling

Hose ID

Part number

Type

3/8" 1/2" 3/4" 1"

5001-03-06 5001-03-08 5001-03-12 5001-03-16

Claw Claw Claw Claw

Thread coupling coupling coupling coupling

3/8" 1/2" 3/4" 1"

F F F F

5001-02

5001-04

Claw coupling male thread

Seal For standard claw couplings

Thread

Part number

Description

3/8" 1/2" 3/4" 1"

5001-04-00

Seal for air, black

M M M M

PRODUCT CATALOGUE 2009


Product group 570

Part number

Descr.

5396-01-01 5396-02-01 5396-03-01 5396-04-01 5396-05-01 5396-06-01 5396-07-01

H H H H H H H

Stainless steel ACCESSORIES PIPE CLAMPs 5396-0

5396-7

Normal weld plate

Sectional plate

Standard series Stainless steel

Standard series Stainless steel

Group

SP SP SP SP SP SP SP

1 2 3 4 5 6 7

5396-1

Part number

Descr.

5396-12-01 5396-13-01 5396-14-01 5396-15-01 5396-16-01

H H H H H

SP SP SP SP SP

-

H H H H

Group Long Long Long Long Long

2 3 4 5 6

Standard series Stainless steel

H H H H H

Standard series, stainless steel Part number

Descr.

5397-01-22 5397-03-28 5397-04-30 5397-05-40 5397-06-50 5397-07-60 5397-00-01

H IS H IS H IS H IS H IS H IS Washer

Thread M6 M6 M6 M6 M6 M6 M6

Group

No. clamps

1 2 3 4 5

10 10 10 10 5

RSP RSP RSP RSP RSP

Length 22 28 30 40 50 60

Group 1&2 3 4 5 6 7

5397-3 Hexagon bolt for sectional plate

2 3 4 5

Inline weld plate

5396-31-10 5396-32-10 5396-33-10 5396-34-10 5396-35-05

1 2 3 4 5 6 7

Group

5396-3

Descr.

TP TP TP TP TP TP TP

Cap head bolt for washer

SPD SPD SPD SPD

Part number

H H H H H H H

Standard series Stainless steel

Standard series Stainless steel

5396-22-02 5396-23-02 5396-24-02 5396-25-02

5396-71-01 5396-72-01 5396-73-01 5396-74-01 5396-75-01 5396-76-01 5396-77-01

Group

5397-0

Double weld plate

Descr.

Descr.

Weld plate Long

5396-2

Part number

Part number

Standard series, stainless steel Part number

Descr.

5397-31-30 5397-33-35 5397-34-40 5397-35-50 5397-36-60 5397-37-70

H H H H H H

SKB SKB SKB SKB SKB SKB

Thread M6 M6 M6 M6 M6 M6

Length 30 35 40 50 60 70

Group 1&2 3 4 5 6 7

5397-2 Stacking bolt

5398

Standard series, stainless steel

Wear rail with accessories Standard series Stainless steel Part number

Description

5398-00-05 5398-00-02 5393-00-03

Wear rail, 2 meter 14x28 mm Mounting nut M6 O-ring for FM

PRODUCT CATALOGUE 2009

Part number

Descr.

Thread

5392-21-22 5392-23-28 5392-24-30 5392-25-40 5392-26-50 5393-00-04

H PBS M6 H PBS M6 H PBS M6 H PBS M6 H PBS M6 Tab washer

Length 22 27 29 39 49

Group 1&2 3 4 5 6

335

10


STAINLESS STEEL HOSE CLAMPS ETC.

Part number

Description

5561-10-08 5561-10-09 5561-10-10 5561-10-11 5561-10-12 5561-10-13 5561-10-14 5561-10-15 5561-10-16 5561-10-17

Mini Mini Mini Mini Mini Mini Mini Mini Mini Mini

clamp clamp clamp clamp clamp clamp clamp clamp clamp clamp

5561-10

5564

Hose clamp mini

Hose clamp

Stainless, AISI 304, Band width 12 mm

According to DIN 3017 Stainless steel

Max dim. 8,5 9,5 11 12 13 14 15 16 17 18

mm mm mm mm mm mm mm mm mm mm

Band width

Part number

12 12 12 12 12 12 12 12 12 12

5564-08-16 5564-12-22 5564-16-25 5564-23-35 5564-25-40 5564-30-45 5564-32-50 5564-40-60 5564-50-70 5564-60-80 5564-70-90 5564-01-00 5564-01-10 5564-01-20 5564-01-30 5564-01-40 5564-01-50 5564-01-60 5564-01-70 5564-01-80

mm mm mm mm mm mm mm mm mm mm

5563 Hose clamp Stainless steel

Part number

Dimension range

5563-08-14 5563-11-17 5563-13-20 5563-15-24 5563-19-28 5563-22-32 5563-26-38 5563-32-44 5563-38-50 5563-44-56 5563-50-65 5563-58-75 5563-68-85 5563-77-95 5563-91-12 5563-91-38 5563-91-65 5563-91-80 5563-92-05

8 - 14 11 - 17 13 - 20 15 - 24 19 - 28 22 - 32 26 - 38 32 - 44 38 - 50 44 - 56 50 - 65 58 - 75 68 - 85 77 - 95 87 - 112 104 - 138 130 - 165 150 - 180 175 - 205

Band width

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

9 9 9 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

5565-20 Hose clamp Stainless, AISI 316, PC 20-1, simple Band width 20 mm Part number

Description

5565-20-40 5565-20-45 5565-20-50 5565-20-55 5565-20-60 5565-20-65 5565-20-70

PC PC PC PC PC PC PC

336

20-1 20-1 20-1 20-1 20-1 20-1 20-1

Dim. range Band width 35 39 44 49 54 59 64

-

product group 510

40 45 50 55 60 65 70

mm mm mm mm mm mm mm

20 20 20 20 20 20 20

mm mm mm mm mm mm mm

Dimension range 8 - 16 12 - 22 16 - 25 23 - 35 25 - 40 30 - 45 32 - 50 40 - 60 50 - 70 60 - 80 70 - 90 80 - 100 90 - 110 100 - 120 110 - 130 120 - 140 130 - 150 140 - 160 150 - 170 160 - 180

Band width

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

9 9 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

5566-20 Hose clamp Stainless, AISI 316, PC 20-2, double Band width 20 mm Part number

Description

5566-20-50 5566-20-55 5566-20-60 5566-20-65 5566-20-70 5566-20-75 5566-20-80 5566-20-85 5566-20-90 5566-20-95 5566-21-00 5566-21-05 5566-21-10 5566-21-15 5566-21-20 5566-21-25 5566-21-30 5566-21-35 5566-21-40 5566-21-45 5566-21-50 5566-21-60

PC PC PC PC PC PC PC PC PC PC PC PC PC PC PC PC PC PC PC PC PC PC

20-2 20-2 20-2 20-2 20-2 20-2 20-2 20-2 20-2 20-2 20-2 20-2 20-2 20-2 20-2 20-2 20-2 20-2 20-2 20-2 20-2 20-2

Dim. range Band width

40 - 50 45 - 55 50 - 60 55 - 65 60 - 70 65 - 75 70 - 80 75 - 85 80 - 90 85 - 95 90 - 100 95 - 105 100 - 110 105 - 115 110 - 120 115 - 125 120 - 130 125 - 135 130 - 140 135 - 145 140 - 150 150 - 160

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

PRODUCT CATALOGUE 2009


Product group 510

STAINLESS STEEL HOSE CLAMPS ETC.

5601-03

5601-04

Rubber steel bonded washer

Rubber steel bonded washer

Stainless steel

Stainless steel

Part no.

Description

5601-03-02 5601-03-04 5601-03-06 5601-03-08 5601-03-10 5601-03-12 5601-03-16 5601-03-20 5601-03-24 5601-03-32

Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber

steel steel steel steel steel steel steel steel steel steel

For thread bonded bonded bonded bonded bonded bonded bonded bonded bonded bonded

washer G washer G washer G washer G washer G washer G washer washer G 1 washer G 1 washer

1/8" 1/4" 3/8" 1/2" 5/8" 3/4" G 1" 1/4" 1/2" G 2"

Part no.

Description

5601-04-04 5601-04-05 5601-04-06 5601-04-08 5601-04-10 5601-04-12 5601-04-14 5601-04-16 5601-04-18 5601-04-20 5601-04-22 5601-04-24

Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber Rubber

steel steel steel steel steel steel steel steel steel steel steel steel

For thread bonded bonded bonded bonded bonded bonded bonded bonded bonded bonded bonded bonded

washer washer washer washer washer washer washer washer washer washer washer washer

M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 M22 M24

10

PRODUCT CATALOGUE 2009

337


STAINLESS STEEL Quick Release Fittings

product group 520

5558-94 Faster HNV/INOX ISO B Viton seal. Stainless steel Dim.

1/4" 3/8" 1/2" 3/4" 1"

Male

Female

PN MPa

5558-95-04 5558-95-06 5558-95-08 5558-95-12 5558-95-16

5558-96-04 5558-96-06 5558-96-08 5558-96-12 5558-96-16

35.0 30.0 30.0 25.0 23.0

Thread G G G G

1/4" 3/8" 1/2" 3/4" G 1"

Flow l/min

F F F F F

Length

12 30 50 110 160

70.5 82.5 92.5 111.0 133.0

mm mm mm mm mm

5Txx TEMA T series Viton seal. Stainless steel Dim.

1/4" 3/8" 1/2" 3/4" 1"

338

Male

Tema descr.

5T2520RV 2520RV 5T3820RV 3820RV 5T5020RV 5020RV 5T7520RV 7520RV 5T10020RV 10020RV

Female

Tema descr.

5T2510RV 2510RV 5T3810RV 3810RV 5T5010RV 5010RV 5T7510RV 7510RV 5T10010RV 10010RV

PN MPa 45.0 35.0 30.0 28.0 25.0

Thread G G G G

1/4" 3/8" 1/2" 3/4" G 1"

F F F F F

Flow l/min 19 40 85 160 225

Length 81.0 74.0 82.0 91.0 108.0

mm mm mm mm mm

PRODUCT CATALOGUE 2009


Product group 620

STAINLESS STEEL Cutting ring Fittings

Assembly instructions 1.

Cut the tube at a 90 degree angle (do not use roller, type tube cutters), remove all internal and external burrs.

2.

Oil the 24°cone, the thread of the fitting body, the cutting ring and the nut.

a. For carbon steel fittings, use mineral oil.

b. For stainless steel fittings, use a special highperformance lubricant.

3.

Fit the nut and the cutting ring on the tubes as shown. The larger diameter of the cutting ring must face the nut.

4.

Insert the tube on the 24°cone until it comes into contact with the stop. Tighten the nut by hand until the cutting ring rest firmly on the nut. Then tighten the nut with a wrench until the cutting edge of the ring is in contact with the tube and prevents rotation if this.

5.

Holding the tube against its stop and making sure it does not rotate, tighten the nut by ¾ of a turn. This way, the cutting ring cut into the outer part of the tube for the necessary depth and raises an edge in front of its cutting edge while the second cutting edge clinches the tube at the same time.

6.

Loosen the nut and check that there is a clearly raised edge all round the tube. The edge must cover 80% of the front of the cutting ring. This check is peremptory for the safety of all concerned!! If the raised edge is not satisfactory, pre-assembly must be repeated. The cutting ring can rotate on the tube.

7.

Reassemble the nut on the fitting until a certain resistance is encountered and then tighten for a further 1/4 turn.

A.

Final installation of works pre-installed fittings: Screw the nut by hand as hard as you can, then the nut should be tightened approximately 1/2–3/4 turn more. This information apply to all our pre-installed fittings.

B.

All the pre-assembly of stainless steel fittings must be performed with a pre-assembly tool (blocks or machines).

10

PRODUCT CATALOGUE 2009

339


STAINLESS STEEL Cutting ring Fittings 2603

2803

GE – GB Straight fitting – G M

GE – GB Straight fitting – G M

Cutting edge. ISO 1179-4. Stainless steel

Cutting edge. ISO 1179-4. Stainless steel

Part number

Type

2603-06-02 2603-06-04 2603-06-06 2603-06-08 2603-08-02 2603-08-04 2603-08-06 2603-08-08 2603-10-04 2603-10-06 2603-10-08 2603-12-04 2603-12-06 2603-12-08 2603-12-12 2603-15-06 2603-15-08 2603-15-12 2603-18-06 2603-18-08 2603-18-12 2603-22-08 2603-22-12 2603-22-16 2603-28-12 2603-28-16 2603-28-20 2603-35-16 2603-35-20 2603-35-24 2603-42-20 2603-42-24

GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE

6 L 6 L 6 L 6 L 8 L 8 L 8 L 8 L 10 L 10 L 10 L 12 L 12 L 12 L 12 L 15 L 15 L 15 L 18 L 18 L 18 L 22 L 22 L 22 L 28 L 28 L 28 L 35 L 35 L 35 L 42 L 42 L

Pipe size 6 6 6 6 8 8 8 8 10 10 10 12 12 12 12 15 15 15 18 18 18 22 22 22 28 28 28 35 35 35 42 42

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

G G G G G G G G G G G G G G G G G G G G G G G G G1 G G G G

1 1 1 1

Thread

Part number

Type

1/8" 1/4" 3/8" 1/2" 1/8" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 3/4" 3/8" 1/2" 3/4" 3/8" 1/2" 3/4" 1/2" 3/4" G 1" 3/4" G 1" 1/4" G 1" 1/4" 1/2" 1/4" 1/2"

2803-06-04 2803-06-06 2803-06-08 2803-08-02 2803-08-04 2803-08-06 2803-08-08 2803-10-04 2803-10-06 2803-10-08 2803-12-04 2803-12-06 2803-12-08 2803-14-06 2803-14-08 2803-16-06 2803-16-08 2803-16-12 2803-20-08 2803-20-12 2803-20-16 2803-25-12 2803-25-16 2803-25-20 2803-30-16 2803-30-20 2803-30-24 2803-38-16 2803-38-20 2803-38-24

GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE

M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M

6 S 6 S 6 S 8 S 8 S 8 S 8 S 10 S 10 S 10 S 12 S 12 S 12 S 14 S 14 S 16 S 16 S 16 S 20 S 20 S 20 S 25 S 25 S 25 S 30 S 30 S 30 S 38 S 38 S 38 S

Pipe size 6 6 6 8 8 8 8 10 10 10 12 12 12 14 14 16 16 16 20 20 20 25 25 25 30 30 30 38 38 38

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Thread G G G G G G G G G G G G G G G G G G G G G G1 G1 G1 G1 G1

1/4" 3/8" 1/2" 1/8" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 3/8" 1/2" 3/8" 1/2" 3/4" 1/2" 3/4" G 1" 3/4" G 1" 1/4" G 1" 1/4" 1/2" G 1" 1/4" 1/2"

M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M

2606

2806

GE – MB Straight fitting – M M

GE – MB Straight fitting – M M

Cutting edge. ISO 1179-4. Stainless steel

Cutting edge. ISO 1179-4. Stainless steel

Part number

Type

2606-06-10 2606-08-12 2606-10-14 2606-12-14 2606-12-16 2606-15-18 2606-18-22 2606-22-26 2606-28-33 2606-35-42 2606-42-48

GE GE GE GE GE GE GE GE GE GE GE

340

product group 620

6 L 8 L 10 L 12 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

Pipe size 6 8 10 12 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm mm

Thread M M M M M M M M M M M

10 12 14 14 16 18 22 26 33 42 48

x x x x x x x x x x x

1.0 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0

Part number

Type

2806-06-12 2806-08-14 2806-10-16 2806-12-18 2806-14-20 2806-16-22 2806-25-33 2806-30-42 2806-38-48

GE GE GE GE GE GE GE GE GE

6 S 8 S 10 S 12 S 14 S 16 S 25 S 30 S 38 S

Pipe size 6 8 10 12 14 16 25 30 38

mm mm mm mm mm mm mm mm mm

Thread M M M M M M M M M

12 14 16 18 20 22 33 42 48

x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0

PRODUCT CATALOGUE 2009


Product group 620

STAINLESS STEEL Cutting ring Fittings 2607

2609

GE – NPT Straight fitting – NPT M

GE – G/ED Straight fitting – G M

Cone sealing. Stainless steel ANSI/ASME B1.20.1-1983

Part number Type

Pipe size

Thread

ED sealing. Perbunan. Stainless steel Part number

Type

Pipe size

Thread

2607-06-02 2607-06-04 2607-06-06 2607-06-08 2607-08-02 2607-08-04 2607-08-06 2607-08-08 2607-10-02 2607-10-04 2607-10-06 2607-10-08 2607-12-04 2607-12-06 2607-12-08 2607-12-12 2607-15-08 2607-15-12 2607-18-08 2607-22-08 2607-22-12 2607-28-16 2607-35-20 2607-42-24

GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE

6 L 6 L 6 L 6 L 8 L 8 L 8 L 8 L 10 L 10 L 10 L 10 L 12 L 12 L 12 L 12 L 15 L 15 L 18 L 22 L 22 L 28 L 35 L 42 L

6 6 6 6 8 8 8 8 10 10 10 10 12 12 12 12 15 15 18 22 22 28 35 42

mm 1/8"-27 mm 1/4"-18 mm 3/8"-18 mm 1/2"-14 mm 1/8"-27 mm 1/4"-18 mm 3/8"-18 mm 1/2"-14 mm 1/8"-27 mm 1/4"-18 mm 3/8"-18 mm 1/2"-14 mm 1/4"-18 mm 3/8"-18 mm 3/8"-18 mm 3/4"-14 mm 1/2"-14 mm 3/4"-14 mm 1/2"-14 mm 1/2"-14 mm 3/4"-14 mm 1"-11½ mm 1 1/4"-11½ mm 1 1/2"-11½

NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT

2609-08-04 2609-10-04 2609-22-12 2609-22-16 2609-28-20 2609-42-24

GE GE GE GE GE GE

8 L 10 L 22 L 22 L 28 L 42 L

8 10 22 22 28 42

mm mm mm mm mm mm

2809-10-04 2809-10-08 2809-12-04 2809-12-06 2809-12-08 2809-16-08 2809-20-08 2809-20-12 2809-25-16 2809-30-20

GE GE GE GE GE GE GE GE GE GE

10 10 12 12 12 16 20 20 25 30

10 10 12 12 12 16 20 20 25 30

mm mm mm mm mm mm mm mm mm mm

2807-06-04 2807-06-06 2807-06-08 2807-08-04 2807-08-06 2807-08-08 2807-10-04 2807-10-06 2807-10-08 2807-12-04 2807-12-06 2807-12-08 2807-14-08 2807-16-06 2807-16-08 2807-16-12 2807-20-08 2807-20-12 2807-25-12 2807-25-16 2807-30-16 2807-30-20 2807-38-20 2807-38-24

GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE

6 S 6 S 6 S 8 S 8 S 8 S 10 S 10 S 10 S 12 S 12 S 12 S 14 S 16 S 16 S 16 S 20 S 20 S 25 S 25 S 30 S 30 S 38 S 38 S

6 6 6 8 8 8 10 10 10 12 12 12 14 16 16 16 20 20 25 25 30 30 38 38

mm 1/4"-18 NPT mm 3/8"-18 NPT mm 1/2"-14 NPT mm 1/4"-18 NPT mm 3/8"-18 NPT mm 1/2"-14 NPT mm 1/4"-18 NPT mm 3/8"-18 NPT mm 1/2"-14 NPT mm 1/4"-18 NPT mm 3/8"-18 NPT mm 1/2"-14 NPT mm 1/2"-14 NPT mm 3/8"-18 NPT mm 1/2"-14 NPT mm 3/4"-14 NPT mm 1/2"-14 NPT mm 3/4"-14 NPT mm 3/4"-14 NPT mm 1"-11½ NPT mm 1"-11½ NPT mm 1 1/4"-11½ NPT mm 1 1/4"-11½ NPT mm 1 1/2"-11½ NPT

Part number

Type

2611-06-02 2611-06-04 2611-08-02 2611-08-04 2611-08-06 2611-08-08 2611-10-02 2611-10-04 2611-10-06 2611-10-08 2611-12-02 2611-12-04 2611-12-06 2611-12-08 2611-15-06 2611-15-08 2611-18-08

WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE WE

6 L 6 L 8 L 8 L 8 L 8 L 10 L 10 L 10 L 10 L 12 L 12 L 12 L 12 L 15 L 15 L 18 L

6 6 8 8 8 8 10 10 10 10 12 12 12 12 15 15 18

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

R R R R R R R R R R R R R R R R R

1/8" 1/4" 1/8" 1/4" 3/8" 1/2" 1/8" 1/4" 3/8" 1/2" 1/8" 1/4" 3/8" 1/2" 3/8" 1/2" 1/2"

M M M M M M M M M M M M M M M M M

2811-06-04 2811-08-04 2811-08-06 2811-08-08 2811-10-04 2811-10-06 2811-10-08 2811-12-06 2811-12-08 2811-14-08 2811-16-08

WE WE WE WE WE WE WE WE WE WE WE

6 S 8 S 8 S 8 S 10 S 10 S 10 S 12 S 12 S 14 S 16 S

6 8 8 8 10 10 10 12 12 14 16

mm mm mm mm mm mm mm mm mm mm mm

R R R R R R R R R R R

1/4" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 3/8" 1/2" 1/2" 1/2"

M M M M M M M M M M M

PRODUCT CATALOGUE 2009

S S S S S S S S S S

G 1/4" M G 1/4" M G 3/4" M G 1" M G 1 1/4" M G 1 1/2" M G G G G G G G G

1/4" 1/2" 1/4" 3/8" 1/2" 1/2" 1/2" 3/4" G 1" G 1 1/4"

M M M M M M M M M M

2611 WE – R/C 90° elbow fitting – R M Cone sealing. C DIN 3852. Stainless steel Pipe size

Thread

341

10


STAINLESS STEEL Cutting ring Fittings

product group 620

2613

2621

WE – GB 90° elbow fitting – G M

TE – R/C T-fitting – R M

Cutting edge. B DIN 3852. Stainless steel

Cone sealing. C DIN 3852. Stainless steel

Part number

Type

Pipe size

Thread

2613-22-12 2613-28-16 2613-35-20 2613-42-24

WE WE WE WE

22 28 35 42

L L L L

22 28 35 42

mm mm mm mm

G 3/4" G 1" G 1 1/4" G 1 1/2"

M M M M

2813-20-12 2813-25-16 2813-30-20 2813-38-24

WE WE WE WE

20 25 30 38

S S S S

20 25 30 38

mm mm mm mm

G 3/4" G 1" G 1 1/4" G 1 1/2"

M M M M

Part number

Type

2621-06-02 2621-08-04 2621-10-04 2621-12-06 2621-15-08 2621-18-08

TE TE TE TE TE TE

6 L 8 L 10 L 12 L 15 L 18 L

6 8 10 12 15 18

mm mm mm mm mm mm

R R R R R R

1/8" 1/4" 1/4" 3/8" 1/2" 1/2"

M M M M M M

2821-06-04 2821-08-04 2821-10-06 2821-12-06 2821-14-08 2821-16-08

TE TE TE TE TE TE

6 S 8 S 10 S 12 S 14 S 16 S

6 8 10 12 14 16

mm mm mm mm mm mm

R R R R R R

1/4" 1/4" 3/8" 3/8" 1/2" 1/2"

M M M M M M

2623

WE – NPT 90° elbow fitting NPT

TE – GB T-fitting – G M

Pipe size

Thread

2617-06-02 2617-08-04 2617-10-04 2617-12-04 2617-12-06 2617-12-08 2617-15-08 2617-18-08 2617-22-12 2617-28-16 2617-35-20 2617-42-24

WE WE WE WE WE WE WE WE WE WE WE WE

6 L 8 L 10 L 12 L 12 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 12 12 15 18 22 28 35 42

mm 1/8"-27 mm 1/4"-18 mm 1/4"-18 mm 1/4"-18 mm 3/8"-18 mm 1/2"-14 mm 1/2"-14 mm 1/2"-14 mm 3/4"-14 mm 1"-11½ mm 1 1/4"-11½ mm 1 1/2"-11½

NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT

2817-06-04 2817-10-06 2817-12-06 2817-12-08 2817-14-08 2817-16-08 2817-20-12 2817-25-16 2817-30-20 2817-38-24

WE WE WE WE WE WE WE WE WE WE

6 S 10 S 12 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 10 12 12 14 16 20 25 30 38

mm 1/4"-18 mm 3/8"-18 mm 3/8"-18 mm 1/2"-14 mm 1/2"-14 mm 1/2"-14 mm 3/4"-14 mm 1"-11½ mm 1 1/4"-11½ mm 1 1/2"-11½

NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT

342

Thread

2617 Cone sealing. ANSI/ASME B1.20.1-1983 Stainless steel. Part number Type

Pipe size

Cutting edge. B DIN 3852. Stainless steel Part number

Type

Pipe size

Thread

2623-22-12 2623-28-16 2623-35-20 2623-42-24

TE TE TE TE

22 28 35 42

L L L L

22 28 35 42

mm mm mm mm

G 3/4" G 1" G 1 1/4" G 1 1/2"

M M M M

2823-20-12 2823-25-16 2823-30-20 2823-38-24

TE TE TE TE

20 25 30 38

S S S S

20 25 30 38

mm mm mm mm

G 3/4" G 1" G 1 1/4" G 1 1/2"

M M M M

PRODUCT CATALOGUE 2009


Product group 620

STAINLESS STEEL Cutting ring Fittings 2641

2643

G Straight joint fitting

T T-Joint fitting

Stainless steel

Stainless steel

Part number

Type

Pipe size

2641-06-06 2641-08-08 2641-10-10 2641-12-12 2641-15-15 2641-18-18 2641-22-22 2641-28-28 2641-35-35 2641-42-42

G G G G G G G G G G

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

2841-06-06 2841-08-08 2841-10-10 2841-12-12 2841-14-14 2841-16-16 2841-20-20 2841-25-25 2841-30-30 2841-38-38

G G G G G G G G G G

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

Type

Pipe size

mm mm mm mm mm mm mm mm mm mm

2643-06-06 2643-08-08 2643-10-10 2643-12-12 2643-15-15 2643-18-18 2643-22-22 2643-28-28 2643-35-35 2643-42-42

T T T T T T T T T T

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

mm mm mm mm mm mm mm mm mm mm

2843-06-06 2843-08-08 2843-10-10 2843-12-12 2843-14-14 2843-16-16 2843-20-20 2843-25-25 2843-30-30 2843-38-38

T T T T T T T T T T

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

2642

2644

W Elbow joint fitting

K Cross joint fitting

Stainless steel

Stainless steel

Part number

Type

2642-06-06 2642-08-08 2642-10-10 2642-12-12 2642-15-15 2642-18-18 2642-22-22 2642-28-28 2642-35-35 2642-42-42

W W W W W W W W W W

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

2842-06-06 2842-08-08 2842-10-10 2842-12-12 2842-14-14 2842-16-16 2842-20-20 2842-25-25 2842-30-30 2842-38-38

W W W W W W W W W W

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

PRODUCT CATALOGUE 2009

Part number

Pipe size

Part number

Type

Pipe size

mm mm mm mm mm mm mm mm mm mm

2644-06-06 2644-08-08 2644-10-10 2644-12-12 2644-15-15 2644-18-18 2644-22-22 2644-28-28 2644-35-35 2644-42-42

K K K K K K K K K K

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

mm mm mm mm mm mm mm mm mm mm

2844-06-06 2844-08-08 2844-10-10 2844-12-12 2844-14-14 2844-16-16 2844-20-20 2844-25-25 2844-30-30 2844-38-38

K K K K K K K K K K

6S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

343

10


STAINLESS STEEL Cutting ring Fittings 2645

2647

SV Bulkhead connection

AS Straight welding boss

Stainless steel

Stainless steel

Part number

Type

2645-06-06 2645-08-08 2645-10-10 2645-12-12 2645-15-15 2645-18-18 2645-22-22 2645-28-28 2645-35-35 2645-42-42

SV SV SV SV SV SV SV SV SV SV

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

M M M M M M M M M M

12 14 16 18 22 26 30 36 45 52

x x x x x x x x x x

2845-06-06 2845-08-08 2845-10-10 2845-12-12 2845-14-14 2845-16-16 2845-20-20 2845-25-25 2845-30-30 2845-38-38

SV SV SV SV SV SV SV SV SV SV

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

M M M M M M M M M M

14 16 18 20 22 24 30 36 42 52

x x x x x x x x x x

Pipe size

Bulk thread

Part number

Type

Pipe size

Ă&#x2DC; Body

1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

2647-06-06 2647-08-08 2647-10-10 2647-12-12 2647-15-15 2647-18-18 2647-22-22 2647-28-28 2647-35-35 2647-42-42

AS AS AS AS AS AS AS AS AS AS

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

10 12 14 16 19 22 27 32 40 46

mm mm mm mm mm mm mm mm mm mm

1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

2847-06-06 2847-08-08 2847-10-10 2847-12-12 2847-14-14 2847-16-16 2847-20-20 2847-25-25 2847-30-30 2847-38-38

AS AS AS AS AS AS AS AS AS AS

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

11 13 15 17 19 21 26 31 36 44

mm mm mm mm mm mm mm mm mm mm

2646

2650

WSV Elbow bulkhead connection

EVW Adjustable elbow fitting

Stainless steel

Stainless steel

Part number

Type

2646-06-06 2646-08-08 2646-10-10 2646-12-12 2646-15-15 2646-18-18 2646-22-22 2646-28-28 2646-35-35 2646-42-42

WSV WSV WSV WSV WSV WSV WSV WSV WSV WSV

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

M M M M M M M M M M

12 14 16 18 22 26 30 36 45 52

x x x x x x x x x x

2846-06-06 2846-08-08 2846-10-10 2846-12-12 2846-14-14 2846-16-16 2846-20-20 2846-25-25 2846-30-30 2846-38-38

WSV WSV WSV WSV WSV WSV WSV WSV WSV WSV

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

M M M M M M M M M M

14 16 18 20 22 24 30 36 42 52

x x x x x x x x x x

344

product group 620

Pipe size

Bulk thread

Part number

Type

Pipe size

1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

2650-06-06 2650-08-08 2650-10-10 2650-12-12 2650-15-15 2650-18-18 2650-22-22 2650-28-28 2650-35-35 2650-42-42

EVW EVW EVW EVW EVW EVW EVW EVW EVW EVW

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

2850-06-06 2850-08-08 2850-10-10 2850-12-12 2850-14-14 2850-16-16 2850-20-20 2850-25-25 2850-30-30 2850-38-38

EVW EVW EVW EVW EVW EVW EVW EVW EVW EVW

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

PRODUCT CATALOGUE 2009


Product group 620

STAINLESS STEEL Cutting ring Fittings 2660

2689

EVT Adjustable T-fitting

EVGE–ED Straight fitting

With pre-assembled nut. ED sealing. Perbunan. ISO 1179-2. Stainless steel

Stainless steel Part number

Type

Pipe size

2660-06-06 2660-08-08 2660-10-10 2660-12-12 2660-15-15 2660-18-18 2660-22-22 2660-28-28 2660-35-35 2660-42-42

EVT EVT EVT EVT EVT EVT EVT EVT EVT EVT

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

2860-06-06 2860-08-08 2860-10-10 2860-12-12 2860-14-14 2860-16-16 2860-20-20 2860-25-25 2860-30-30 2860-38-38

EVT EVT EVT EVT EVT EVT EVT EVT EVT EVT

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

Type

Pipe size

2689-06-02 2689-08-04 2689-10-04 2689-12-06 2689-12-08 2689-15-08 2689-18-08 2689-22-12 2689-28-16 2689-35-20 2689-42-24

EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE

6 L 8 L 10 L 12 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm mm

2889-06-04 2889-08-04 2889-10-06 2889-12-06 2889-12-08 2889-14-08 2889-16-08 2889-20-12 2889-25-16 2889-30-20 2889-38-24

EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE

6 S 8 S 10 S 12 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm mm

Thread G G G G G G G G

1/8" 1/4" 1/4" 3/8" 1/2" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

M M M M M M M M M M M

G G G G G G G G

M M M M M M M M M M M

1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

2670

2701

EVL Adjustable L-fitting

GAI – G Straight fitting – G F

Stainless steel

Stainless steel

Part number

Type

2670-06-06 2670-08-08 2670-10-10 2670-12-12 2670-15-15 2670-18-18 2670-22-22 2670-28-28 2670-35-35 2670-42-42

EVL EVL EVL EVL EVL EVL EVL EVL EVL EVL

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

2870-06-06 2870-08-08 2870-10-10 2870-12-12 2870-14-14 2870-16-16 2870-20-20 2870-25-25 2870-30-30 2870-38-38

EVL EVL EVL EVL EVL EVL EVL EVL EVL EVL

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

PRODUCT CATALOGUE 2009

Part number

Pipe size

Part number

Type

Pipe size

2701-06-02 2701-08-04 2701-10-04 2701-10-06 2701-12-06 2701-12-08 2701-15-08 2701-18-08 2701-22-12 2701-28-16 2701-35-20 2701-42-24

GAI GAI GAI GAI GAI GAI GAI GAI GAI GAI GAI GAI

6 L 8 L 10 L 10 L 12 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 10 12 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm mm mm

2901-06-04 2901-08-04 2901-10-06 2901-12-06 2901-14-08 2901-16-08 2901-20-12 2901-25-16 2901-30-20 2901-38-24

GAI GAI GAI GAI GAI GAI GAI GAI GAI GAI

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

Thread G G G G G G G G G

1/8" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

F F F F F F F F F F F F

G G G G G G G

F F F F F F F F F F

1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

345

10


STAINLESS STEEL Cutting ring Fittings 2703

2705

MAV – G Manometer – fitting

RED Reduction – fitting

Stainless steel. Cutting edge ring

Stainless steel

Part number

Type

2703-06-04 2703-08-04 2703-10-04 2703-12-04

MAV MAV MAV MAV

6 L 8 L 10 L 12 L

6 8 10 12

mm mm mm mm

G G G G

1/4" 1/4" 1/4" 1/4"

F F F F

2903-06-08 2903-08-08 2903-10-08 2903-12-06 2903-12-08

MAV MAV MAV MAV MAV

6 S 8 S 10 S 12 S 12 S

6 8 10 12 12

mm mm mm mm mm

G G G G G

1/2" 1/2" 1/2" 3/8" 1/2"

F F F F F

Pipe size

Thread

2704 MAV – EV – G Manometer Pre-assembled fitting. Stainless steel Part number

Type

2704-06-04 2704-08-04 2704-10-04 2704-12-04

MAV-EV MAV-EV MAV-EV MAV-EV

6 L 6 8 L 8 10 L 10 12 L 12

mm mm mm mm

G G G G

1/4" 1/4" 1/4" 1/4"

F F F F

2904-06-08 2904-08-08 2904-10-08 2904-12-08

MAV-EV MAV-EV MAV-EV MAV-EV

6 S 6 8 S 8 10 S 10 12 S 12

mm mm mm mm

G G G G

1/2" 1/2" 1/2" 1/2"

F F F F

346

product group 620

Pipe size

Thread

Part number

Type

Pipe size

2705-08-06 2705-10-06 2705-10-08 2705-12-06 2705-12-08 2705-12-10 2705-15-06 2705-15-08 2705-15-10 2705-15-12 2705-18-08 2705-18-10 2705-18-12 2705-18-15 2705-22-12 2705-22-15 2705-22-18 2705-28-12 2705-28-15 2705-28-18 2705-28-22 2705-35-28 2705-42-28 2705-42-35

RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED

8 /6 10 / 10 / 12 / 12 / 12 / 15 / 15 / 15 / 15 / 18 / 18 / 18 / 18 / 22 / 22 / 22 / 28 / 28 / 28 / 28 / 35 / 42 / 42 /

L 6 L 8 L 6 L 8 L 10 L 6 L 8 L 10 L 12 L 8 L 10 L 12 L 15 L 12 L 15 L 18 L 12 L 15 L 18 L 22 L 28 L 28 L 35 L

8 -6 10 -6 10 -8 12 -6 12 -8 12 -10 15 -6 15 -8 15 -10 15 -12 18 -8 18 -10 18 -12 18 -15 22 -12 22 -15 22 -18 28 -12 28 -15 28 -18 28 -22 35 -28 42 -28 42 -35

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

2905-08-06 2905-10-06 2905-10-08 2905-12-06 2905-12-08 2905-12-10 2905-14-10 2905-14-12 2905-16-06 2905-16-08 2905-16-10 2905-16-12 2905-16-14 2905-20-10 2905-20-12 2905-20-14 2905-20-16 2905-25-16 2905-25-20 2905-30-16 2905-30-20 2905-30-25 2905-38-25 2905-38-30

RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED

8 / 6 S 10 / 6 S 10 / 8 S 12 / 6 S 12 / 8 S 12 / 10 S 14 / 10 S 14 / 12 S 16 / 6 S 16 / 8 S 16 / 10 S 16 / 12 S 16 / 14 S 20 / 10 S 20 / 12 S 20 / 14 S 20 / 16 S 25 / 16 S 25 / 20 S 30 / 16 S 30 / 20 S 30 / 25 S 38 / 25 S 38 / 30 S

8 -6 10 -6 10 -8 12 -6 12 -8 12 -10 14 -10 14 -12 16 -6 16 -8 16 -10 16 -12 16 -14 20 -10 20 -12 20 -14 20 -16 25 -16 25 -20 30 -16 30 -20 30 -25 38 -25 38 -30

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

PRODUCT CATALOGUE 2009


Product group 620

Part number

Type

2707-08-06 2707-10-06 2707-10-08 2707-12-06 2707-12-08 2707-12-10 2707-15-06 2707-15-08 2707-15-10 2707-15-12 2707-18-06 2707-18-08 2707-18-10 2707-18-12 2707-18-15 2707-22-06 2707-22-08 2707-22-10 2707-22-12 2707-22-15 2707-22-18 2707-28-06 2707-28-08 2707-28-10 2707-28-12 2707-28-15 2707-28-18 2707-28-22 2707-35-06 2707-35-08 2707-35-10 2707-35-12 2707-35-15 2707-35-18 2707-35-22 2707-35-28 2707-42-10 2707-42-12 2707-42-15 2707-42-18 2707-42-22 2707-42-28 2707-42-35

KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F KOR F

STAINLESS STEEL Cutting ring Fittings 2707

2907

KOR – L Reduction

KORO – S reduction

Pre-assembled nut. Stainless steel

Pre-assebmled nut. Stainless steel

Pipe size 8 / 6 L 10 / 6 L 10 / 8 L 12 / 6 L 12 / 8 L 12 / 10 L 15 / 6 L 15 / 8 L 15 / 10 L 15 / 12 L 18 / 6 L 18 / 8 L 18 / 10 L 18 / 12 L 18 / 15 L 22 / 6 L 22 / 8 L 22 / 10 L 22 / 12 L 22 / 15 L 22 / 18 L 28 / 6 L 28 / 8 L 28 / 10 L 28 / 12 L 28 / 15 L 28 / 18 L 28 / 22 L 35 / 6 L 35 / 8 L 35 / 10 L 35 / 12 L 35 / 15 L 35 / 18 L 35 / 22 L 35 / 28 L 42 / 10 L 42 / 12 L 42 / 15 L 42 / 18 L 42 / 22 L 42 / 28 L 42 / 35 L

8 -6 10 -6 10 -8 12 -6 12 -8 12 -10 15 -6 15 -8 15 -10 15 -12 18 -6 18 -8 18 -10 18 -12 18 -15 22 -6 22 -8 22 -10 22 -12 22 -15 22 -18 28 -6 28 -8 28 -10 28 -12 28 -15 28 -18 28 -22 35 -6 35 -8 35 -10 35 -12 35 -15 35 -18 35 -22 35 -28 42 -10 42 -12 42 -15 42 -18 42 -22 42 -28 42 -35

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Part number

Type

2907-08-06 2907-10-06 2907-10-08 2907-12-06 2907-12-08 2907-12-10 2907-14-06 2907-14-08 2907-14-10 2907-14-12 2907-16-06 2907-16-08 2907-16-10 2907-16-12 2907-16-14 2907-16-16 2907-20-06 2907-20-08 2907-20-10 2907-20-12 2907-20-14 2907-20-16 2907-25-06 2907-25-08 2907-25-10 2907-25-12 2907-25-14 2907-25-16 2907-25-20 2907-30-06 2907-30-08 2907-30-10 2907-30-12 2907-30-14 2907-30-16 2907-30-20 2907-30-25 2907-38-06 2907-38-08 2907-38-10 2907-38-12 2907-38-14 2907-38-16 2907-38-20 2907-38-25 2907-38-30

KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR

F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F

Pipe size 8 / 6 S 10 / 6 S 10 / 8 S 12 / 6 S 12 / 8 S 12 / 10 S 14 / 6 S 14 / 8 S 14 / 10 S 14 / 12 S 16 / 6 S 16 / 8 S 16 / 10 S 16 / 12 S 16 / 14 S 16 / 16 S 20 / 6 S 20 / 8 S 20 / 10 S 20 / 12 S 20 / 14 S 20 / 16 S 25 / 6 S 25 / 8 S 25 / 10 S 25 / 12 S 25 / 14 S 25 / 16 S 25 / 20 S 30 / 6 S 30 / 8 S 30 / 10 S 30 / 12 S 30 / 14 S 30 / 16 S 30 / 20 S 30 / 25 S 38 / 6 S 38 / 8 S 38 / 10 S 38 / 12 S 38 / 14 S 38 / 16 S 38 / 20 S 38 / 25 S 38 / 30 S

8 -6 10 -6 10 -8 12 -6 12 -8 12 -10 14 -6 14 -8 14 -10 14 -12 16 -6 16 -8 16 -10 16 -12 16 -14 16 -16 20 -6 20 -8 20 -10 20 -12 20 -14 20 -16 25 -6 25 -8 25 -10 25 -12 25 -14 25 -16 25 -20 30 -6 30 -8 30 -10 30 -12 30 -14 30 -16 30 -20 30 -25 38 -6 38 -8 38 -10 38 -12 38 -14 38 -16 38 -20 38 -25 38 -30

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

10

PRODUCT CATALOGUE 2009

347


STAINLESS STEEL Cutting ring Fittings 2720

2723

RHD Non-return valve

RHZ – G – ED Non-return valve

Opening pressure 1 Bar. Stainless steel

Opening pressure 1 Bar. ED sealing. Stainless steel

Part number

Type

2720-06-06 2720-08-08 2720-10-10 2720-12-12 2720-15-15 2720-18-18 2720-22-22 2720-28-28 2720-35-35 2720-42-42

RHD RHD RHD RHD RHD RHD RHD RHD RHD RHD

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

2920-06-06 2920-08-08 2920-10-10 2920-12-12 2920-14-14 2920-16-16 2920-20-20 2920-25-25 2920-30-30 2920-38-38

RHD RHD RHD RHD RHD RHD RHD RHD RHD RHD

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

Pipe size

Part number

Type

Pipe size

mm mm mm mm mm mm mm mm mm mm

2723-06-02 2723-08-04 2723-10-04 2723-12-06 2723-15-08 2723-18-08 2723-22-12 2723-28-16 2723-35-20 2723-42-24

RHZ RHZ RHZ RHZ RHZ RHZ RHZ RHZ RHZ RHZ

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

mm mm mm mm mm mm mm mm mm mm

2923-06-04 2923-08-04 2923-10-06 2923-12-06 2923-14-08 2923-16-08 2923-20-12 2923-25-16 2923-30-20 2923-38-24

RHZ RHZ RHZ RHZ RHZ RHZ RHZ RHZ RHZ RHZ

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

Thread G G G G G G G

1/8" 1/4" 1/4" 3/8" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

M M M M M M M M M M

G G G G G G G

M M M M M M M M M M

1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

2721

2727

RHV – G – ED Non-return valve

RHDI Non-return valve

Opening pressure 1 Bar. ED sealing. Stainless steel

Opening pressure 1 Bar. ED sealing. Stainless steel

Part number

Type

2721-06-02 2721-08-04 2721-10-04 2721-12-06 2721-15-08 2721-18-08 2721-22-12 2721-28-16 2721-35-20 2721-42-24

RHV RHV RHV RHV RHV RHV RHV RHV RHV RHV

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

2921-06-04 2921-08-04 2921-10-06 2921-12-06 2921-14-08 2921-16-08 2921-20-12 2921-25-16 2921-30-20 2921-38-24

RHV RHV RHV RHV RHV RHV RHV RHV RHV RHV

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

348

product group 620

Pipe size

Thread G G G G G G G

1/8" 1/4" 1/4" 3/8" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

M M M M M M M M M M

G G G G G G G

M M M M M M M M M M

1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

Part number 2727-04-04 2727-06-06 2727-08-08 2727-12-12 2727-16-16 2727-20-20 2727-24-24

Type RHDI RHDI RHDI RHDI RHDI RHDI RHDI

Thread G G G G

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

F F F F F F F

Alternative opening pressures 0.2; 0.5; 2 and 3 Bar are available on request.

PRODUCT CATALOGUE 2009


Product group 620

STAINLESS STEEL Cutting ring Fittings 2730

2749

PL Plug

D Cutting ring 2-edge, progressive ring. Stainless steel

With O-ring. Stainless steel Part number

Type

Pipe size

Part number

Type

Pipe size

2730-00-06 2730-00-08 2730-00-10 2730-00-12 2730-00-15 2730-00-18 2730-00-22 2730-00-28 2730-00-35 2730-00-42

PL PL PL PL PL PL PL PL PL PL

6 L/S 8 L/S 10 L/S 12 L/S 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

2749-00-06 2749-00-08 2749-00-10 2749-00-12 2749-00-15 2749-00-18 2749-00-22 2749-00-28 2749-00-35 2749-00-42

D D D D D D D D D D

6 L/S 8 L/S 10 L/S 12 L/S 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

2930-00-06 2930-00-08 2930-00-10 2930-00-12 2930-00-14 2930-00-16 2930-00-20 2930-00-25 2930-00-30 2930-00-38

PL PL PL PL PL PL PL PL PL PL

6S 8 S 10 S 12 S 14 S 16 S 20S 25S 30S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

2949-00-14 2949-00-16 2949-00-20 2949-00-25 2949-00-30 2949-00-38

D D D D D D

14 16 20 25 30 38

14 16 20 25 30 38

mm mm mm mm mm mm

S S S S S S

2747

2750

VH Reinforcing ring

M Nut

For thin-walled metal tubes Stainless steel Part number

Type

2747-00-04 2747-00-05 2747-00-06 2747-00-07 2747-00-08 2747-00-09 2747-00-10 2747-00-11 2747-00-12 2747-00-13 2747-00-14 2747-00-15 2747-00-16 2747-00-17 2747-00-18 2747-00-19 2747-00-20

VH VH VH VH VH VH VH VH VH VH VH VH VH VH VH VH VH

PRODUCT CATALOGUE 2009

Stainless steel

Pipe ID

Part number

Type

4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

2750-00-06 2750-00-08 2750-00-10 2750-00-12 2750-00-15 2750-00-18 2750-00-22 2750-00-28 2750-00-35 2750-00-42

M M M M M M M M M M

6 L 8 L 10 L 12 L 15 L 18 L 22 L 28 L 35 L 42 L

6 8 10 12 15 18 22 28 35 42

mm mm mm mm mm mm mm mm mm mm

M M M M M M M M M M

12 14 16 18 22 26 30 36 42 52

x x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

2950-00-06 2950-00-08 2950-00-10 2950-00-12 2950-00-14 2950-00-16 2950-00-20 2950-00-25 2950-00-30 2950-00-38

M M M M M M M M M M

6 S 8 S 10 S 12 S 14 S 16 S 20 S 25 S 30 S 38 S

6 8 10 12 14 16 20 25 30 38

mm mm mm mm mm mm mm mm mm mm

M M M M M M M M M M

14 16 18 20 22 24 30 36 42 52

x x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Pipe size

Thread

349

10


Stainless steel Adaptors

product group 780 7802

7807

Straight adaptor GM–GM

Swivel adaptor G FS – G FS

60° cone sealing. DIN 3852, A Stainless steel Part number

Thread 1

7802-02-02 7802-02-04 7802-04-04 7802-04-06 7802-04-08 7802-06-06 7802-06-08 7802-08-08 7802-08-12 7802-08-16 7802-12-12 7802-12-16 7802-16-16 7802-16-20 7802-20-20 7802-20-24 7802-24-24 7802-24-32 7802-32-32

G G G G G G G G G G G G

G G G G

1 1 1 1

1/8" 1/8" 1/4" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 1/2" 3/4" 3/4" G 1" G 1" 1/4" 1/4" 1/2" 1/2" G 2"

x

M M M M M M M M M M M M M M M M M M M

Thread 2

Part number

G G G G G G G G G

7807-02-02 7807-02-04 7807-04-04 7807-06-06 7807-08-08 7807-12-12 7807-12-16 7807-16-16

G

G G G G

1 1 1 1

1/8" 1/4" 1/4" 3/8" 1/2" 3/8" 1/2" 1/2" 3/4" G 1" 3/4" G 1" G 1" 1/4" 1/4" 1/2" 1/2" G 2" G 2"

M M M M M M M M M M M M M M M M M M M

7805 Reduction adaptor GM–GF 60° cone sealing. Stainless steel Part number

Thread 1

7805-02-02 7805-04-02 7805-04-04 7805-04-06 7805-06-04 7805-06-06 7805-06-08 7805-08-06 7805-08-08 7805-08-12 7805-12-08 7805-12-12 7805-12-16 7805-16-12 7805-16-16 7805-20-20 7805-20-24 7805-24-24 7805-32-24

G G G G G G G G G G G G G

350

1/8" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" G 1" G 1" G 1 1/4" G 1 1/4" G 1 1/2" G 2"

M M M M M M M M M M M M M M M M M M M

x

Stainless steel

Thread 2 G G G G G G G G G G G G G G1 G1 G1 G s1

1/8" 1/8" 1/4" 3/8" 1/4" 3/8" 1/2" 3/8" 1/2" 3/4" 1/2" 3/4" G 1" 3/4" G 1" 1/4" 1/2" 1/2" 1/2"

F F F F F F F F F F F F F F F F F F F

Thread 1 G G G G G G G

1/8" 1/8" 1/4" 3/8" 1/2" 3/4" 3/4" G 1"

x

FS FS FS FS FS FS FS FS

Thread 2 G G G G G G

1/8" 1/4" 1/4" 3/8" 1/2" 3/4" G 1" G 1"

FS FS FS FS FS FS FS FS

7808 Straight swivel G M – G FS Stainless steel Part number

Thread 1

7808-02-02 7808-04-04 7808-06-06 7808-06-08 7808-08-06 7808-08-08 7808-08-12 7808-12-12 7808-16-16 7808-20-16 7808-20-20 7808-24-24 7808-32-32

G G G G G G G G

1/8" 1/4" 3/8" 3/8" 1/2" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/4" G 1 1/2" G 2"

M M M M M M M M M M M M M

x

Thread 2 G G G G G G G G

1/8" 1/4" 3/8" 1/2" 3/8" 1/2" 3/4" 3/4" G 1" G 1" G 1 1/4" G 1 1/2" G 2"

FS FS FS FS FS FS FS FS FS FS FS FS FS

PRODUCT CATALOGUE 2009


Product group 780

Stainless steel Adaptors

Part number

Thread 1

7809-02-04 7809-04-02 7809-04-06 7809-04-08 7809-04-12 7809-06-04 7809-06-08 7809-08-06 7809-08-12 7809-08-16 7809-12-08 7809-12-16 7809-12-20 7809-12-24 7809-16-12 7809-16-20 7809-16-24 7809-20-16

G G G G G G G G G G G G G G

1/8" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4" G 1" G 1" G 1" G 1 1/4"

7809

7811

Reduction adaptor G M – G F long

Straight bushing GF–GF

Stainless steel

Stainless steel

x

M M M M M M M M M M M M M M M M M M

Thread 2

Part number

Thread 1

G G G G G G G G G

7811-02-02 7811-02-04 7811-04-04 7811-04-06 7811-06-06 7811-08-08 7811-12-12 7811-16-16 7811-20-20 7811-24-24 7811-32-32

G G G G G G G

G G1 G1 G G1 G1

1/4" 1/8" 3/8" 1/2" 3/4" 1/4" 1/2" 3/8" 3/4" G 1" 1/2" G 1" 1/4" 1/2" 3/4" 1/4" 1/2" G 1"

F F F F F F F F F F F F F F F F F F

1/8" 1/8" 1/4" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

x

F F F F F F F F F F F

Thread 2 G G G G G G G

1/8" 1/4" 1/4" 3/8" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

F F F F F F F F F F F

7812 Straight adaptor GM–RM Stainless steel

7810 Reduction adaptor G M – G F Short Stainless steel Part number

Thread 1

7810-06-02 7810-08-04 7810-12-04 7810-12-06 7810-12-08 7810-16-06 7810-16-08 7810-20-12 7810-24-16 7810-32-24

G G G G G

3/8" 1/2" 3/4" 3/4" 3/4" G 1" G 1" G 1 1/4" G 1 1/2" G 2"

M M M M M M M M M M

x

Thread 2 G G G G G G G G

1/8" 1/4" 1/4" 3/8" 1/2" 3/8" 1/2" 3/4" G 1" G 1 1/2"

F F F F F F F F F F

Part number 7812-04-02 7812-04-04 7812-06-02 7812-06-06 7812-08-06 7812-08-08 7812-12-12 7812-12-16 7812-20-20 7812-24-24 7812-32-32

Thread 1 G G G G G G G G G1 G1

1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" 3/4" 1/4" 1/2" G 2"

x

M M M M M M M M M M M

Thread 2 R R R R R R R

1/8" 1/4" 1/8" 3/8" 3/8" 1/2" 3/4" R 1" R 1 1/4" R 1 1/2" R2"

M M M M M M M M M M M

7813 Straight adaptor G F – JIC M Stainless steel Part number

Thread 1

7813-04-07

G 1/4" M

x

Thread 2 JIC 7/16" M

10

PRODUCT CATALOGUE 2009

351


Stainless steel Adaptors

Part number

Thread 1

7822-02-02 7822-04-04 7822-04-06 7822-06-04 7822-06-06 7822-08-04 7822-08-06 7822-08-08 7822-08-12 7822-08-16 7822-10-08 7822-12-12 7822-16-12 7822-16-16 7822-20-16 7822-20-20 7822-24-16 7822-24-24 7822-32-32

G G G G G G G G G G G G

G G G G

1 1 1 1

1/8" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" 5/8" 3/4" G 1" G 1" 1/4" 1/4" 1/2" 1/2" G 2"

product group 780 7822

7836

Straight adaptor G M – NPT M

Elbow adaptor 90° GM–RM

Stainless steel

Stainless steel

x

M M M M M M M M M M M M M M M M M M M

Thread 2

1/8"-27 1/4"-18 3/8"-18 1/4"-18 3/8"-18 1/4"-18 3/8"-18 1/2"-14 3/4"-14 1"-11½ 1/2"-14 3/4"-14 3/4"-14 1"-11½ 1"-11½ 1 1/4"-11½ 1"-11½ 1 1/2"-11½ 2"-11½

NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT

M M M M M M M M M M M M M M M M M M M

Part number

Thread 1

Type

Thread 2

7836-02-02 7836-04-04 7836-06-06 7836-08-08 7836-12-12 7836-16-16

G G G G G

90 90 90 90 90 90

R R R R R

1/8" 1/4" 3/8" 1/2" 3/4" G 1"

M M M M M M

T T T T T T

T-Adaptor GM–GM–GM Stainless steel Part number

Thread 1

x Thread 2

x Thread 3

7851-06-06 7851-08-08 7851-12-12 7851-16-16

G 3/8" M G 1/2" M G 3/4" M G 1" M

G 3/8" M G 1/2" M G 3/4" M G 1" M

G 3/8" M G 1/2" M G 3/4" M G 1" M

7852

Elbow 90° adapt0r G M – G FS

T-Adaptor G FS – G FS – G FS

Forged. Stainless steel Thread 1

Type

7831-02-02 7831-04-04 7831-06-06 7831-08-08 7831-12-12 7831-16-16 7831-20-20 7831-24-24 7831-32-32

G G G G G

90° 90° 90° 90° 90° 90° 90° 90° 90°

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

M M M M M M M M M

FS FS FS FS FS FS FS FS FS

Part number 7852-04-04 7852-06-06 7852-08-08 7852-12-12 7852-16-16

Thread 1 G G G G

1/4" 3/8" 1/2" 3/4" G 1"

FS FS FS FS FS

x Thread 2 G G G G

1/4" 3/8" 1/2" 3/4" G 1"

FS FS FS FS FS

x Thread 3 G G G G

1/4" 3/8" 1/2" 3/4" G 1"

FS FS FS FS FS

7853

Swivel elbow 90° Bend G M – G FS

T-Adaptor G M – G M – G FS

Stainless steel

Stainless steel

Type

7835-04-04 7835-06-06 7835-08-08 7835-12-12 7835-16-16

G G G G

90° 90° 90° 90° 90°

352

1/8" 1/4" 3/8" 1/2" 3/4" G 1" 1/4" 1/2" G 2"

7835

Thread 1 M M M M M

Stainless steel

Thread 2

Forged G Forged G Forged G Forged G Forged G Forged Forged G 1 Forged G 1 Forged

Part number

1/4" 3/8" 1/2" 3/4" G 1"

M M M M M M

7851

7831

Part number

1/8" 1/4" 3/8" 1/2" 3/4" R 1"

Thread 2 G G G G

1/4" 3/8" 1/2" 3/4" G 1"

FS FS FS FS FS

Part number

Thread 1

7853-04-04 7853-06-06 7853-08-08 7853-12-12 7853-16-16

G G G G

1/4" 3/8" 1/2" 3/4" G 1"

M M M M M

x Thread 2 G G G G

1/4" 3/8" 1/2" 3/4" G 1"

M M M M M

x Thread 3 G G G G

1/4" 3/8" 1/2" 3/4" G 1"

FS FS FS FS FS

PRODUCT CATALOGUE 2009


Product group 780

Stainless steel Adaptors 7854

7863

L-Adaptor G M – G FS – G M

Inset plug G M Stainless steel

Stainless steel Part number

Thread 1

7854-04-04 7854-06-06 7854-08-08 7854-12-12 7854-16-16

G G G G

1/4" 3/8" 1/2" 3/4" G 1"

x Thread 2

M M M M M

G G G G

1/4" 3/8" 1/2" 3/4" G 1"

FS FS FS FS FS

x Thread 3 G G G G

1/4" 3/8" 1/2" 3/4" G 1"

M M M M M

Part number

Type

7863-00-02 7863-00-04 7863-00-06 7863-00-08 7863-00-12 7863-00-16 7863-00-20 7863-00-24

Inset Inset Inset Inset Inset Inset Inset Inset

Thread plug plug plug plug plug plug plug plug

G G G G G

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

M M M M M M M M

7861 Plug G M Stainless steel Part number

Type

7861-00-02 7861-00-04 7861-00-06 7861-00-08 7861-00-12 7861-00-16 7861-00-20

Plug Plug Plug Plug Plug Plug Plug

7890

Thread G G G G G

1/8" 1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4"

M M M M M M M

Bulkhead GM–GM Part number

Thread 1

Type

Thread 2

7890-04-04 7890-06-06 7890-08-08 7890-12-12

G G G G

Bulkhead Bulkhead Bulkhead Bulkhead

G G G G

1/4" 3/8" 1/2" 3/4"

M M M M

1/4" 3/8" 1/2" 3/4"

M M M M

7861-10 Plug R M Stainless steel Part number

Type

Thread

7861-10-06 7861-10-08

Plug Plug

R 3/8" M R 1/2" M

7861-20 Plug R FS Stainless steel Part number

Type

7861-20-04 7861-20-06 7861-20-08 7861-20-12 7861-20-16

Plug Plug Plug Plug Plug

PRODUCT CATALOGUE 2009

Thread G G G G

1/4" 3/8" 1/2" 3/4" G 1"

FS FS FS FS FS

10

353


Stainless steel Flare Fittings

Part number Type 7901-07-07 7901-09-09 7901-12-12 7901-14-14 7901-17-17 7901-21-21 7901-26-26 7901-30-30

J J J J J J J J

7901

7905

JG Straight joint fitting

J SV Straight bulkhead

Stainless steel

Stainless steel

Pipe dim.1 (mm) Pipe dim.2 (mm)

G G G G G G G G

product group 790

6 10 12 14|15|16 18|20 25 30|32 38

6 10 12 14|15|16 18|20 25 30|32 38

Part number

Type

7905-07-07 7905-08-08 7905-09-09 7905-12-12 7905-14-14 7905-17-17 7905-21-21 7905-26-26 7905-30-30

J J J J J J J J J

Pipe dim. (mm)

SV SV SV SV SV SV SV SV SV

6 8 10 12 14|15|16 18|20 25 30|32 38

7902 JW Elbow joint fitting

Part number

Type

7902-07-07 7902-08-08 7902-09-09 7902-12-12 7902-14-14 7902-21-21 7902-26-26

J J J J J J J

W W W W W W W

7911

Stainless steel

J GE Straight fitting – NPTF-thread

Pipe dim. (mm)

Stainless steel

6 8 10 12 14|15|16 25 30|32

Part number Type 7911-07-02 7911-09-04 7911-09-06 7911-12-04 7911-12-08 7911-17-08 7911-21-16

J J J J J J J

GE GE GE GE GE GE GE

Pipe dim. (mm) 6 10 10 12 12 18|20 25

Thread 1/8"-27 1/4"-18 3/8"-18 1/4"-18 1/2"-14 1/2"-14 1"-11½

NPTF NPTF NPTF NPTF NPTF NPTF NPTF

7903 JT T-joint fitting Stainless steel Part number

Type

7903-07-07 7903-08-08 7903-09-09 7903-12-12 7903-14-14 7903-17-17 7903-21-21 7903-26-26

J J J J J J J J

T T T T T T T T

Pipe dim. (mm) 6 8 10 12 14|15|16 18|20 25 30|32

7904 JK Cross joint fitting Stainless steel Part number

Type

7904-12-12 7904-17-17 7904-26-26

J K J K J K

354

Pipe dim. (mm) 12 18|20 30|32

PRODUCT CATALOGUE 2009


Product group 790

Stainless steel Flare Fittings 7913

7920

J GE Straight fitting – G-thread

J WE elbow fitting – NPTF-thread

With O-ring and washer. Stainless steel

Stainless steel

Part number Type Pipe dim. (mm) 7913-07-02 7913-07-04 7913-07-06 7913-07-08 7913-08-04 7913-08-06 7913-09-06 7913-09-08 7913-12-04 7913-12-06 7913-12-08 7913-12-12 7913-14-06 7913-14-08 7913-14-12 7913-17-08 7913-17-12 7913-17-16 7913-21-12 7913-21-16 7913-21-20 7913-26-16 7913-26-20 7913-30-20 7913-30-24

J J J J J J J J J J J J J J J J J J J J J J J J J

GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE GE

6 6 6 6 8 8 10 10 12 12 12 12 14|15|16 14|15|16 14|15|16 18|20 18|20 18|20 25 25 25 30|32 30|32 38 38

G G G G G G G G G G G G G G G G G G G1 G1 G1 G1

Thread

Part number Type Pipe dim. (mm)

1/8" 1/4" 3/8" 1/2" 1/4" 3/8" 3/8" 1/2" 1/4" 3/8" 1/2" 3/4" 3/8" 1/2" 3/4" 1/2" 3/4" G 1" 3/4" G 1" 1/4" G 1" 1/4" 1/4" 1/2"

7920-07-02 7920-09-04 7920-14-08 7920-26-20

M M M M M M M M M M M M M M M M M M M M M M M M M

7914

J J J J

WE WE WE WE

Thread

6 1/8"-27 10 1/4"-18 14|15|16 1/2"-14 30|32 1 1/4"-11½

NPTF NPTF NPTF NPTF

7922 J WE Adjustable fitting – G-thread With O-ring and washer. Stainless steel Part number Type Pipe dim. (mm) 7922-07-02 7922-07-04 7922-08-04 7922-09-04 7922-09-06 7922-09-08 7922-12-06 7922-12-08 7922-14-08 7922-17-08 7922-17-12 7922-21-16 7922-26-20 7922-30-24

J J J J J J J J J J J J J J

WE WE WE WE WE WE WE WE WE WE WE WE WE WE

6 6 8 10 10 10 12 12 14|15|16 18|20 18|20 25 30|32 38

Thread G G G G G G G G G G G

1/8" 1/4" 1/4" 1/4" 3/8" 1/2" 3/8" 1/2" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

M M M M M M M M M M M M M M

J GE Straight fitting – UNF-thread With O-ring. Stainless steel Thread

7923

6 7/16"-20 UNF 6 9/16"-18 UNF 10 9/16"-18 UNF 12 9/16"-18 UNF 12 3/4"-16 UNF 12 7/8"-14 UNF 14|15|16 7/8"-14 UNF 18|20 7/8"-14 UNF 18|20 1 1/16"-12 UNF 25 1 5/16"-12 UNF 30|32 1 5/8"-12 UNF 38 1 7/8"-12 UNF

J WE Adjustable fitting – UNF-thread

Part number Type Pipe dim. (mm) 7914-07-07 7914-07-09 7914-09-09 7914-12-09 7914-12-12 7914-12-14 7914-14-14 7914-17-14 7914-17-17 7914-21-21 7914-26-26 7914-30-30

J J J J J J J J J J J J

GE GE GE GE GE GE GE GE GE GE GE GE

With O-ring. Stainless steel Part number Type Pipe dim. (mm) 7623-07-07 7623-09-09 7623-09-12 7623-12-12 7623-14-14 7623-17-17 7623-21-21 7623-26-26 7623-30-30

J J J J J J J J J

WE WE WE WE WE WE WE WE WE

Thread

6 7/16"-20 UNF 10 9/16"-18 UNF 10 3/4"-16 UNF 12 3/4"-16 UNF 14|15|16 7/8"-14 UNF 18|20 1 1/16"-12 UNF 25 1 5/16"-12 UNF 30|32 1 5/8"-12 UNF 38 1 7/8"-12 UNF

10

PRODUCT CATALOGUE 2009

355


Stainless steel Flare Fittings 7951

7961

J GAI Straight fitting – G-thread

J EVU 45° Elbow fitting with JIC 37°

Stainless steel

Swivel nut. Stainless steel

Part number Type Pipe dim. (mm) 7951-07-04 7951-08-04 7951-09-06 7951-12-08 7951-14-08 7951-17-12 7951-21-16 7951-26-20 7951-30-24

J J J J J J J J J

GAI GAI GAI GAI GAI GAI GAI GAI GAI

Part number Type 7959-07-07 7959-09-09 7959-12-12 7959-14-14 7959-17-17

J J J J J

6 8 10 12 14|15|16 18|20 25 30|32 38

Thread G G G G G G

1/4" 1/4" 3/8" 1/2" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2"

F F F F F F F F F

Part number

Type

7961-07-07 7961-08-08 7961-09-09 7961-12-12 7961-14-14 7961-17-17 7961-21-21 7961-26-26 7961-30-30

J J J J J J J J J

EVU EVU EVU EVU EVU EVU EVU EVU EVU

Pipe dim. (mm) 6 8 10 12 14|15|16 18|20 25 30|32 38

7959

7962

J GII Straight adaptor with JIC 37°

J EVT T-fitting with JIC 37°

Swivel nut. Stainless steel

Swivel nut. Stainless steel

Pipe dim.1 (mm) Pipe dim.2 (mm)

GII GII GII GII GII

6 10 12 14|15|16 18|20

6 10 12 14|15|16 18|20

Part number

Type

7962-07-07 7962-08-08 7962-09-09 7962-12-12 7962-14-14 7962-17-17 7962-21-21 7962-26-26 7962-30-30

J J J J J J J J J

EVT EVT EVT EVT EVT EVT EVT EVT EVT

Pipe dim. (mm) 6 8 10 12 14|15|16 18|20 25 30|32 38

7960

7963

J EVW 90° Elbow fitting with JIC 37°

J EVL L-fitting with JIC 37°

Swivel nut. Stainless steel

Swivel nut. Stainless steel

Part number

Type

7960-07-07 7960-08-08 7960-09-09 7960-12-12 7960-14-14 7960-17-17 7960-21-21 7960-26-26 7960-30-30

J J J J J J J J J

356

product group 790

EVW EVW EVW EVW EVW EVW EVW EVW EVW

Pipe dim. (mm)

Part number

Type

6 8 10 12 14|15|16 18|20 25 30|32 38

7963-07-07 7963-08-08 7963-09-09 7963-12-12 7963-14-14 7963-17-17 7963-21-21 7963-26-26 7963-30-30

J J J J J J J J J

EVL EVL EVL EVL EVL EVL EVL EVL EVL

Pipe dim. (mm) 6 8 10 12 14|15|16 18|20 25 30|32 38

PRODUCT CATALOGUE 2009


Product group 790

Stainless steel Flare Fittings 7966

7970

*

J EVGE Adaptor with JIC 37째 G-thread

J KOR Reduction

Swivel nut. With O-ring and washer. Stainless steel Part number Type 7966-07-04 7966-08-04 7966-09-04 7966-09-06 7966-12-06 7966-12-08 7966-14-08 7966-17-08 7966-17-12 7966-21-12 7966-21-16 7966-26-20 7966-30-24

J J J J J J J J J J J J J

EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE

Pipe dim. (mm) 6 8 10 10 12 12 14|15|16 18|20 18|20 25 25 30|32 38

Thread G G G G G G G G G G

1/4" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 1/2" 3/4" 3/4" G 1" G 1 1/4" G 1 1/2"

M M M M M M M M M M M M M

7967 J EVGE Adaptor with JIC 37째 UNF-thread Swivel nut. With O-ring. Stainless steel Part number Type 7967-07-07 7967-09-09 7967-12-12 7967-14-14 7967-17-17 7967-21-21 7967-26-26 7967-30-30

J J J J J J J J

EVGE EVGE EVGE EVGE EVGE EVGE EVGE EVGE

Pipe dim. (mm) 6 10 12 14|15|16 18|20 25 30|32 38

Stainless steel Part number Type 7970-09-07 7970-09-08* 7970-12-07 7970-12-08 7970-12-09 7970-14-09 7970-14-12* 7970-17-08 7970-17-09 7970-17-12 7970-17-14* 7970-21-12 7970-21-14 7970-21-17 7970-26-14 7970-26-17 7970-26-21 7970-30-21 7970-30-26

J J J J J J J J J J J J J J J J J J J

KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR KOR

Pipe dim.1 (mm) Pipe dim.2 (mm)

10 10 12 12 12 14|15|16 14|15|16 18|20 18|20 18|20 18|20 25 25 25 30|32 30|32 30|32 38 38

6 8 6 8 10 10 12 8 10 12 14|15|16 12 14|15|16 18|20 14|15|16 18|20 25 25 30|32

* The reduction is made in one piece. The others use a nut from the fitting on which the reduction has been assembled.

Thread

7/16"-20 9/16"-18 3/4"-16 7/8"-14 1 1/16"-12 1 5/16"-12 1 5/8"-12 1 7/8"-12

UNF UNF UNF UNF UNF UNF UNF UNF

7981 J MA Measurement connection Stainless steel Part number Type 7981-08-04 7981-09-04 7981-12-04 7981-17-04 7981-21-04

J J J J J

MA MA MA MA MA

Pipe dim. (mm) 8 10 12 18|20 25

Thread G G G G G

1/4" 1/4" 1/4" 1/4" 1/4"

F F F F F

10

PRODUCT CATALOGUE 2009

357


Stainless steel Flare Fittings

Part number

Type

7990-00-07 7990-00-08 7990-00-09 7990-00-12 7990-00-14 7990-00-17 7990-00-21 7990-00-26 7990-00-30

J J J J J J J J J

PLI PLI PLI PLI PLI PLI PLI PLI PLI

product group 790

7990

7991

J PLI Blind nut

J PLU Plug

Stainless steel

Stainless steel

Pipe dim. (mm)

Part number

Type

6 8 10 12 14|15|16 18|20 25 30|32 38

7991-00-07 7991-00-09 7991-00-12 7991-00-17 7991-00-21

J J J J J

PLU PLU PLU PLU PLU

Pipe dim. (mm) 6 10 12 18|20 25

7992 JM Nut Stainless steel Part number

Type

7992-00-07 7992-00-08 7992-00-09 7992-00-12 7992-00-14 7992-00-17 7992-00-18 7992-00-19 7992-00-26 7992-00-30

J J J J J J J J J J

M M M M M M M M M M

Pipe dim. (mm) 6 8 10 12 14|15|16 18 18|20 22 30|32 38

7993 JD Clamping sleeve Stainless steel

358

Part number

Type

7993-00-06 7993-00-08 7993-00-10 7993-00-12 7993-00-14 7993-00-15 7993-00-16 7993-00-18 7993-00-20 7993-00-25 7993-00-30 7993-00-32 7993-00-38

J J J J J J J J J J J J J

D D D D D D D D D D D D D

Pipe dim. (mm) 6 8 10 12 14 15 16 18 20 25 30 32 38

PRODUCT CATALOGUE 2009


Product group 860

Stainless steel Ball Valves 8631

8641

2-way ball valve, G-threaded, female

3-way reversing valve, L-drilled, G-threaded, female

Stainless steel Part number

Connection

8631-04-04 8631-06-06 8631-08-08 8631-12-12 8631-16-16 8631-20-20 8631-24-24 8631-32-32

G G G G

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1 1/2" G 2"

DN

F F F F F F F F

Work pr.

6 10 12 20 25 32 40 50

50.0 50.0 50.0 35.0 35.0 31.5 31.5 31.5

MPa MPa MPa MPa MPa MPa MPa MPa

Stainless steel

Part number Connection 8641-04-04 8641-06-06 8641-08-08 8641-12-12

G G G G

1/4" 3/8" 1/2" 3/4"

F F F F

Stainless steel

Part number Connection 8632-06-12 8632-08-14 8632-10-16 8632-12-18 8632-15-22 8632-18-26 8632-22-30 8632-28-36 8632-35-45 8632-42-52

SKL SKL SKL SKL SKL SKL SKL SKL SKL SKL

6 8 10 12 15 18 22 28 35 42

M M M M M M M M M M

Thread 12 14 16 18 22 26 30 36 45 52

x x x x x x x x x x

1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

DN 4 6 8 10 12 16 20 25 32 40

Work pr. 50.0 50.0 50.0 50.0 50.0 50.0 35.0 35.0 31.5 31.5

MPa MPa MPa MPa MPa MPa MPa MPa MPa MPa

8634 2-way ball valve, SKS-connection

Drill

Work pr.

6 10 12 20

L-Drilled L-Drilled L-Drilled L-Drilled

40.0 40.0 35.0 35.0

MPa MPa MPa MPa

8642 3-way reversing valve, T-drilled, G-threaded, female

8632 2-way ball valve, SKL-connection

DN

Stainless steel

Part number Connection 8642-04-04 8642-06-06 8642-08-08 8642-12-12 8642-16-16

G G G G

1/4" 3/8" 1/2" 3/4" G 1"

F F F F F

DN

Drill

Work pr.

6 10 12 20 25

T-Drilled T-Drilled T-Drilled T-Drilled T-Drilled

40.0 40.0 35.0 35.0 35.0

MPa MPa MPa MPa MPa

8690 2-way ball valve, low pressure, short thread Teflon, stainless steel Part number 8690-04-04 8690-06-06 8690-08-08 8690-12-12 8690-16-16 8690-20-20 8690-24-24 8690-32-32

Type Ball Ball Ball Ball Ball Ball Ball Ball

Connection

valve valve valve valve valve valve valve valve

G G G G

1/4" 3/8" 1/2" 3/4" G 1" G 1 1/4" G 1/1/2" G 2"

F F F F F F F F

Work pr. 6.9 6.9 6.9 6.9 6.9 6.9 6.9 6.9

MPa MPa MPa MPa MPa MPa MPa MPa

Stainless steel

Part number Connection 8634-08-16 8634-10-18 8634-12-20 8634-16-24 8634-20-30 8634-25-36 8634-30-42 8634-38-52

SKS8 SKS10 SKS12 SKS16 SKS20 SKS25 SKS30 SKS38

M M M M M M M M

Thread 16 18 20 24 30 36 42 52

PRODUCT CATALOGUE 2009

x x x x x x x x

1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0

DN 4 6 8 12 16 20 25 32

Work pr. 50.0 50.0 50.0 50.0 50.0 35.0 35.0 31.5

MPa MPa MPa MPa MPa MPa MPa MPa

8691 3-way ball valve, low pressure, L-drilled Teflon, stainless steel Part number 8691-06-06 8691-08-08 8691-12-12 8691-16-16 8691-20-20 8691-24-24 8691-32-32

Type L-drilled L-drilled L-drilled L-drilled L-drilled L-drilled L-drilled

Connection G 3/8" F G 1/2" F G 3/4" F G 1" F G 1 1/4" F G 1 1/2" F G 2" F

Work pr. 6.9 6.9 6.9 6.9 6.9 6.9 6.9

MPa MPa MPa MPa MPa MPa MPa

359

10


Stainless steel Test points

Part number 8301-90-02 8301-90-04

product group 800

8301-90

8310

Test points M 16 x 2 G-threaded

Measurement hose M 16 x 2 â&#x20AC;&#x201C; G 1/4"

Stainless steel

Manometer connection WP 63.0 Mpa. Stainless steel

Type

Connection

Test nipple M16 x 2 Test nipple M16 x 2

G 1/8" M G 1/4" M

Part number Type 8310-04-00 8310-10-00 8310-15-00 8310-20-00 8310-32-00 8310-40-00

Measurement Measurement Measurement Measurement Measurement Measurement

Length hose hose hose hose hose hose

400 1,000 1,500 2,000 3,200 4,000

mm mm mm mm mm mm

8301-94 Test points M 16 x 2 UNF-threaded Stainiless steel Part number 8301-94-09

Type

8311

Connection

Test nipple M16 x 2

Measurement hose M 16 x 2 â&#x20AC;&#x201C; 2

9/16"-18 UNF

WP 63.0 Mpa. Stainless steel

8301-95 Test points M 16 x 2 NPT-threaded Part number 8301-95-04

360

Type Test nipple M16 x 2

Connection

Part number Type 8311-04-00 8311-10-00 8311-15-00 8311-20-00 8311-32-00 8311-40-00

Measurement Measurement Measurement Measurement Measurement Measurement

Length hose hose hose hose hose hose

400 1,000 1,500 2,000 3,200 4,000

mm mm mm mm mm mm

9/16"-18 NPT

PRODUCT CATALOGUE 2009


HYDROSCAND Technical Information

Table of Contents

Hose Information

Hose Dimensioning Flow Diameter Installation examples Calculation of Hose Length Working Pressure, hydraulic hoses Classification of Hose Length Angular Relationship Abbreviations for polymetric materials Volumetric expansion Temperature effect on working pressure of the P.T.F.E. hose Vacuum Transformation Table

Fitting Information

Thread Table DIN/PN Flange Dimensions SAE Flange Dimensions Sealing Principles Tightening Torque for connection end Tightening Torque

Transformation Tables

Pressure Vacuum

Pressure Drop Tables

Hose Hose Fitting Quick Release Quick Release Quick Release Quick Release Quick Release

Pipe Clamps

Installation recomendations

Page 362 363 364 365 366 367 368 368 369 370 370

Page 371 372 373 374 374 375

Page 376 376

Fitting, Fitting, Fitting, Fitting, Fitting,

ISO A HANSEN BRUNNING TEMA FASTER

Page 377 378 379 379 379 380 381

Page 383

Hydroscand reserves the right to modify any or all parts of this catalogue without any prior notice.

PRODUCT CATALOGUE 2009

361

11


HYDROSCAND Technical information

Hose Information

HOSE DIMENSIONING

Flow (liter/min)

Diameter mm Inch Flow speed (m/sek)

The above monogram is based on a laminar flow. A higher flow rate can be used in many applications. If so, consideration should be taken to tank volume, outside temperature and if the hydraulic aggregate will operate for long or short periods of time. A scant dimensioning results in increased oil temperature.

362

PRODUCT CATALOGUE 2009


Hose Information

HYDROSCAND Technical Information

Flow DIaMEter

Flow diameter in millimeter Max flow l/min

5 m/s Pressure lines

3 m/s Pressure lines

1 m/s Pressure lines

1

2.1

2.7

4.6

2

2.9

3.8

6.5

3

3.6

4.6

8.0

4

4.1

5.3

9.2

5

4.6

6.0

10.3

6

5.1

6.5

11.3

7

5.5

7.0

12.2

8

5.8

7.5

13.0

9

6.2

8.0

13.8

10

6.5

8.4

14.6

12

7.1

9.2

16.0

14

7.7

10.0

17.2

16

8.2

10.6

18.4

18

8.7

11.3

19.6

20

9.2

11.9

20.6

22

9.7

12.5

21.6

24

10.1

13.0

22.6

26

10.5

13.6

23.5

28

10.9

14.1

24.4

30

11.3

14.6

25.3

32

11.7

15.1

26.1

34

12.0

15.5

26.9

36

12.4

16.0

27.7

38

12.7

16.4

28.4

40

13.0

16.8

29.2

45

13.8

17.9

30.9

50

14.6

18.8

32.6

55

15.3

19.7

34.2

60

16.0

20.6

35.7

65

16.6

21.5

37.2

70

17.2

22.3

38.6

75

17.9

23.1

39.9

80

18.4

23.8

41.2

s

85

19.0

24.5

42.5

90

19.6

25.3

43.7

m

95

20.1

25.9

44.9

100

20.6

26.6

46.1

110

21.6

27.9

48.4

120

22.6

29.2

50.5

130

23.5

30.3

52.6

140

24.4

31.5

54.5

150

25.3

32.6

56.5

160

26.1

33.7

58.3

170

26.9

34.7

60.1

180

27.7

35.7

61.8

190

28.4

36.7

63.5

200

29.2

37.6

65.2

220

30.6

39.5

68.4

240

31.9

41.2

71.4

260

33.2

42.9

74.3

280

34.5

44.5

77.1

300

35.7

46.1

79.8

320

36.9

47.6

82.5

340

38.0

49.1

85.0

360

39.1

50.5

87.5

380

40.2

51.9

89.9

400

41.2

53.2

92.2

450

43.7

56.5

97.8

500

46.1

59.5

103.1

Determining tube size for hydraulic systems Proper tube material, type and size for a given application and type of fitting is critical for efficient and trouble free operation of the fluid system. Selection of proper tubing involves choosing the right tube material, and determining the optimum tube size (O.D. and wall thickness). A tube that is too small causes high fluid velocity, which has many detrimental effects. In pressure lines, it causes high friction losses and turbulence, both resulting in high pressure drops and heat generation. High heat accelerates wear in moving parts and rapid aging of seals and hoses, all resulting in reduced component life. High heat generation also means wasted energy, and hence, low efficiency.

Determine required flow diameter Use table to determine recommended flow diameter for the required flow rate and type of line. The table is based on the following recommended flow velocities:

Pressure lines - 3 --> 5 Avoid flow rates > 8 m/s! The resulting forces are high and can destroy the tube lines.

Return lines - 2 --> 4

Suction lines - 1

m

s m s

11 PRODUCT CATALOGUE 2009

363


HYDROSCAND Technical information

Hose Information

INSTALLATION examples WRONG

364

RIGHT

PRODUCT CATALOGUE 2009


Hose Information

HYDROSCAND Technical Information

Calculation of Hose Length In the majority of hose installations, the hose assembly is required to have at least one bend. It is therefore essential to avoid all tensions in the end fittings in order to obtain the maximum life expectancy of the hose. The following information is intended to provide designers a guide for correct hose length calculation.

Static INSTALLATION

Flexible INSTALLATION

Length = 2A + (3,14 x R)

Length = 2A + X + T

Length = 2A + X

Fig. 1

Fig. 2

In order to avoid tensions in the end fittings, both ends of a short hose should allowed to be straight, so that the bend starts way from the fittings.

If the installation is flexible, special consideration concerning the hose length must be taken. It is of course necessary to allow an extra "straight hose" to relieve the tension at the end fittings when the hose is being flexed.

The calculated distance (A), showed in the figures above, is a recommended distance to cover for both the fitting and the straight part of the hose. The different diameter parameters are available in the table below.

Thus, if the hose length is T, the extra length should at each fitting be 1/2 T.

Thus, the hose length of the example in Fig. 1 should be L = 2A + (3,14 x R) (where R should not be smaller than the recommended minimum bend radius for each hose dimension).

The general formula is L = 2A + X + T. This additional length (T) will permit reasonable flexing in all directions.

For all other types of bends, the general formula L = 2A + X should cover each installation (where X is the length of the hose bend, which should be suitable calculated or measured).

Diam. "A" mm.

1/4"

3/8"

1/2"

5/8"

3/4"

1"

1 1/4"

1 1/2"

2"

105

115

130

140

155

175

200

225

255

Note: The distance (A) does not include the length of special fittings or adapters. If these are included in the installation, extra length must be added to the distance (A).

11 PRODUCT CATALOGUE 2009

365


HYDROSCAND Technical information

Hose Information

Working Pressure, Hydraulic Hose (MPa) Hose Dimension Hose Type

02

03

06

08

12

16

19.0

15.5

14.0

8.5

7.0

100.0

100.0

100.0

100.0

80.0

1015 Deltaflex

50.0

44.5

41.5

39.0

35.0

31.0

28.0

26.0

21.0

-40 – +100

1015-14 Deltaflex CO

50.0

44.5

41.5

39.0

35.0

31.0

28.0

26.0

21.0

-40 – +100

21.2

17.5

14.0

11.5

9.5

1003-10 SAE 100 100 R1AT – Red 1014 Blastopak

1031-01 HYDROSCAND T1111

30.0

04

27.5

05

21.5

10

20

24

32

Work temp. C° -40 – +100 -40 – +120

-40 – +100

1032 HYDROSCAND T1112 Twin

1032 HYDROSCAND T1113 Triplet

27.5

21.2

-40 – +100

1034-01 HYDROSCAND T1211

33.0

26.0

-40 – +100

1036 HYDROSCAND T1212 Twin

33.0

26.0

-40 – +100

22.4

19.0

-40 – +100

1037-01 HYDROSCAND T1121 Spray paint hose

36.2

1038-01 HYDROSCAND T1221 Spray paint hose

31.0 40.0

33.0

26.0

21.0

21.0

17.5

16.0

14.0

1047 Supertwin T7012 Twin

21.0

21.0

17.5

16.0

14.0

1049-01 HYDROSCAND T8011

35.0

35.0

28.0

24.5

1045-01 HYDROSCAND T7011

21.0

1052 HYDROSCAND T8012 Supertwin Twin 1054 High Pressure Water Cleaning Hose HTC-1C

33.0

1055 High Pressure Water Cleaning Hose HTC-2C

-40 – +100 9.0

7.0

-40 – +100 -40 – +100 -40 – +100

28.0

24.5

-40 – +100

28.0

33.0

27.0

-40 – +155

45.0

45.0

36.0

-40 – +155

1056-1 HYDROSCAND T3311

80.0

1058-1 HYDROSCAND T3211

70.0

70.0

1059-01 HYDROSCAND T8081

35.0

28.0

24.5

1071 HI-TEMP

22.5

18

16

13

10.5

1075 Compactflex

34.5

27.5

24.0

19.0

15.5

1087 Marion 2XA

40.0

35.0

30.0

27.5

23.5

18.5

-40 – +100

1091 P.T.F.E. hose convoluted

13.8

11.2

7.8

6.8

5.2

3.5

-70 – +230 -60 – +260

1092-01 P.T.F.E hose

24.2

19.8

1093-01 P.T.F.E. hose

-40 – +100

29.5

-40 – +100 8.8

6.3

5

4

15.5

13.8

12.1

8.6

7.8

6.0

17.3

16.0

13.8

12.4

8.6

7.8

5.3

6.9

8.6

9.6

7.6

6.9

6.9

5.2

3.4

19.0

14.7

19.8

-40 – +150 -40 – +100

16.8

1094 P.T.F.E. hose, tape wrapped convoluted 1095 P.T.F.E. hose, two braids of stainless steels

-40 – +100

-60 – +260 -54 – +204 -60 – +260

1101-00 Egeflex1

25.0

22.5

21.5

18.0

16.0

13.0

10.5

8.8

6.3

5.0

4.0

-40 – +100

1101-14 Egeflex 1CO

25.0

22.5

21.5

18.0

16.0

13.0

10.5

8.8

6.3

5.0

4.0

-40 – +100

1102-00 Egeflex2

41.5

40.0

35.0

33.0

27.5

25.0

21.5

16.5

1102-14 Egeflex 2CO

41.5

40.0

35.0

33.0

27.5

25.0

21.5

16.5

12.5

9.0

8.0

33.0

27.5 10.0

-40 – +100 -40 – +100

1102-44 Egeflex 2PO

40.0

1103-03 Kappaflex1

29.0

25.0

23.0

20.0

15.0

12.5

11.0

1105-10 Kappaflex 2CO

45.0

42.0

38.5

34.5

29.0

28.0

20.0

-40 – +100

47.0

41.0

37.5

32.7

-40 – +100

1118-02 Gammaflex 5

42.0

38.0

32.5

29.0

25.0

-40 – +100

1142-14 IsoBar42 / 1135-14 IsoBar 35 CO

42.0

42.0

42.0

42.0

34.5

-40 – +121

1106-03 Kappaflex3 1110-00/-03 IsoBar 10

10

1201-11 SpirStar type 2W

140.0

1201-30 SpirStar type 4

216.0

180.0

1201-40 SpirStar type 6

280.0

1201-46 SpirStar type 6H

-50 – +100 -40 – +100

10

128.0

100.0

92.0

100.0

150.0

150.0

150.0

128.0

262.0

200.0

192.0

168.0

280.0

250.0

-40 – +100

-30 – +80 100.0

100.0

-30 – +80

140.0

-30 – +80 -30 – +80

1 MPA = 10 BAR 1 BAR = 14,5 PSI Safety factor 4:1

366

PRODUCT CATALOGUE 2009


Hose Information

HYDROSCAND Technical Information

Classification of Hose Length How to measure the hose when ordering a pre-assembled hose:

Length between sealing surface

Length between sealing surface

FS fittings

M fittings

Length between sealing surface

Length between sealing surface

FS and M fittings

Straight standpipe and fittings

Length between the angels center lines

Length between the angels center lines

90° and 45° fittings

90° and 45° fittings

Length between the pipe bend centre lines

Length between the pipe bend centre lines and the sealing surface of the flange

90° SAE flange fittings

Straight 45° SAE flange fittings

Tolerance for assembled hoses Hose length (mm)

Tolerance

300

+/- 3 mm

300 – 1 000

+/- 6 mm

0 –

1 000 –

+/- 1 %, ex. 40 mm at a hose length of 2,000 mm

11 PRODUCT CATALOGUE 2009

367


HYDROSCAND Technical information

Hose Information

Angular relationship

Fitting (A) has position 0°. Turn fitting (B) to a defined angle (V)°. The angle tolerance is ± 3°.

ABBREVIATIONS for polymeric materials BR

Butadiene rubber

CM

Chloroten rubber

CR

Chloroprene rubber

CSM

Chlorosulfonated polyethylene (Hypalon)

EPDM

Ethylene-propylene rubber

EPM

Ethylene-propylene rubber

IR

Butyl rubber

NBR

Nitrile rubber

NR

Natural rubber

PA

Polyamide

PE

Polyethylene

PEL

Polyethylene

P.T.F.E. Polytetraflouro ethylene (Teflon) PU

Polyurethane

PVC

Polyvinyl chloride

SBR

Styrene butadiene rubber

UPE

Ultra high molecular weight polyethylene

XL