Page 72

7-4

EXHAUST SYSTEM

EXCVA AND EXCV INSTALLATION Install the EXCVA and EXCV in the reverse order of removal. Pay attention to the following points: • Connect the EXCV cables temporarily to the EXCV pulley. • Adjust the clearance A between the adjuster end and EXCV pulley to provide 4 mm (0.16 in) and more.

• Make the No. 1 cable straight and turn the No. 1 cable adjuster 1 in or out until the inner cable length B becomes 42 – 43 mm (1.65 – 1.69 in). • After adjusting the inner cable length B, tighten the lock nut 2. No. 1 cable: 11276-48G0

• Make the No. 2 cable straight and turn in the cable adjuster 3 fully. No. 2 cable: 11277-48G0 • Loosen the lock nuts 4 and turn the No. 2 cable adjuster 5 in or out until the inner cable length C becomes 58 – 59 mm (2.28 – 2.32 in). • After adjusting the inner cable length C, tighten the lock nuts 4.

• Connect the No. 1 cable 6 and No. 2 cable 7 to the EXCVA pulley.

Reparatie Manuel M1800R deel 2  
Reparatie Manuel M1800R deel 2  

Reparatie Manuel M1800R deel 2

Advertisement