Page 63

FUEL SYSTEM AND THROTTLE BODY

THROTTLE BODY REASSEMBLY Reassemble the throttle body in the reverse order of disassembly. Pay attention to the following points: • With the STV fully closed, install the STP sensor 1 and tighten the STP sensor mounting screw to the specified torque. NOTE: * Apply thin coat of the engine oil to the O-ring. * Align the secondary throttle shaft end A with the groove B of STP sensor. * Apply SUZUKI SUPER GREASE “A” to the secondary throttle shaft end A if necessary. ) 99000-25010: SUZUKI SUPER GREASE “A” or equivalent $ 09930-11950: Torx wrench ( STP sensor mounting screw: 3.5 N·m (0.35 kgf-m, 2.5 lb-ft) NOTE: * Make sure the STP valve open or close smoothly. * If the STP sensor adjustment is necessary, refer to page 6-22 for STP sensor setting procedure. • With the throttle valve fully closed, install the TP sensor 2 and tighten the TP sensor mounting screw to the specified torque. NOTE: * Apply thin coat of the engine oil to the O-ring. * Align the throttle shaft end C with the groove D of TP sensor. * Apply SUZUKI SUPER GREASE “A” to the throttle shaft end C if necessary. ) 99000-25010: SUZUKI SUPER GREASE “A” or equivalent $ 09930-11950: Torx wrench ( TP sensor mounting screw: 3.5 N·m (0.35 kgf-m, 2.5 lb-ft) NOTE: * Make sure the throttle valve open or close smoothly. * TP sensor setting procedure. ("5-20)

6-19

Reparatie Manuel M1800R deel 2  
Reparatie Manuel M1800R deel 2  

Reparatie Manuel M1800R deel 2

Advertisement