Page 61

FUEL SYSTEM AND THROTTLE BODY

THROTTLE BODY CLEANING ! Some carburetor cleaning chemicals, especially dip-type soaking solutions, are very corrosive and must be handled carefully. Always follow the chemical manufacturer’s instructions on proper use, handling and storage. • Clean passageways (except for main bore) with a spray-type carburetor cleaner and blow dry with compressed air. # * Never clean the main bore of throttle body to prevent come off molybdenum from the throttle valve. * Do not use wire to clean passageways. Wire can damage passageways. If the components cannot be cleaned with a spray cleaner it may be necessary to use a dip-type cleaning solution and allow them to soak. Always follow the chemical manufacturer’s instructions for proper use and cleaning of the throttle body components. Do not apply carburetor cleaning chemicals to the rubber and plastic materials.

INSPECTION • * * * * * *

Check following items for any damage or clogging. O-ring Throttle valve Secondary throttle valve Vacuum hose Delivery hose Injector dust seal

ISC VALVE INSPECTION The ISC valve can be checked without removing it from the throttle body. *Refer to the ISC VALVE INSPECTION for details. ("5-70) If the resistance is not within the standard range, replace the ISC valve motor assembly with a new one.

6-17

Reparatie Manuel M1800R deel 2  

Reparatie Manuel M1800R deel 2

Reparatie Manuel M1800R deel 2  

Reparatie Manuel M1800R deel 2

Advertisement