CLUTCH • Install the washer 1, spacer 2 and needle bearing 3 onto the countershaft. • Apply engine oil to them.
• Install the primary driven gear assembly 3 onto the countershaft. • Install the thrust washer 4.
• Install the clutch sleeve hub assembly 5 onto the countershaft. • Install the spring washer 6. NOTE: The conical curve side of spring washer 6 faces outside.
• Hold the generator rotor and tighten the clutch sleeve hub nut to the specified torque. # Clutch sleeve hub nut: 95 N·m (9.5 kgf-m, 68.5 lb-ft)
• Lock the clutch sleeve hub nut with a center punch.
Published on Jun 12, 2011