Page 280

EMISSION CONTROL INFORMATION

• Check the resistance between the terminals of the PAIR control solenoid valve. " Resistance: 18 – 22 Ω at 20 – 30 °C (68 – 86 °F) # 09900-25008: Multi-circuit tester set $ Tester knob indication: Resistance (Ω)

INSTALLATION If the resistance is not within the standard range, replace the PAIR control solenoid valve with a new one. Installation is in the reverse order of removal. Pay attention to the following points: • Install the PAIR control solenoid valve to the air cleaner chamber. • Apply thin coat of the engine oil to the new O-rings. % Replace the O-rings with the new ones. • Connect the PAIR control solenoid valve lead wire coupler and PAIR hoses securely. • PAIR system hose routing (!12-8 to -9)

12-7

Reparatie Manuel M1800R deel 2  
Reparatie Manuel M1800R deel 2  

Reparatie Manuel M1800R deel 2

Advertisement